configure revision 91041
1#!/bin/sh 2 3### WARNING: this file contains embedded tabs. Do not run untabify on this file. 4 5# Configuration script 6# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999 7# Free Software Foundation, Inc. 8 9# This program is free software; you can redistribute it and/or modify 10# it under the terms of the GNU General Public License as published by 11# the Free Software Foundation; either version 2 of the License, or 12# (at your option) any later version. 13# 14# This program is distributed in the hope that it will be useful, 15# but WITHOUT ANY WARRANTY; without even the implied warranty of 16# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17# GNU General Public License for more details. 18# 19# You should have received a copy of the GNU General Public License 20# along with this program; if not, write to the Free Software 21# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 22 23# This file was originally written by K. Richard Pixley. 24 25# 26# Shell script to create proper links to machine-dependent files in 27# preparation for compilation. 28# 29# If configure succeeds, it leaves its status in config.status. 30# If configure fails after disturbing the status quo, 31# config.status is removed. 32# 33 34export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$) 35 36remove=rm 37hard_link=ln 38symbolic_link='ln -s' 39 40#for Test 41#remove="echo rm" 42#hard_link="echo ln" 43#symbolic_link="echo ln -s" 44 45# clear some things potentially inherited from environment. 46 47Makefile=Makefile 48Makefile_in=Makefile.in 49arguments= 50build_alias= 51cache_file=config.cache 52cache_file_option= 53configdirs= 54extraconfigdirs= 55diroptions= 56exec_prefix= 57exec_prefixoption= 58fatal= 59floating_point=default 60gas=default 61gcc_version= 62gcc_version_trigger= 63host_alias=NOHOST 64host_makefile_frag= 65moveifchange= 66norecursion= 67other_options= 68package_makefile_frag= 69package_makefile_rules_frag= 70prefix=/usr/local 71progname= 72program_prefix= 73program_prefixoption= 74program_suffix= 75program_suffixoption= 76program_transform_name= 77program_transform_nameoption= 78redirect= 79removing= 80site= 81site_makefile_frag= 82site_option= 83srcdir= 84srctrigger= 85subdirs= 86target_alias=NOTARGET 87target_makefile_frag= 88undefs=NOUNDEFS 89version="$Revision: 1.13 $" 90x11=default 91bindir='${exec_prefix}/bin' 92sbindir='${exec_prefix}/sbin' 93libexecdir='${exec_prefix}/libexec' 94datadir='${prefix}/share' 95sysconfdir='${prefix}/etc' 96sharedstatedir='${prefix}/com' 97localstatedir='${prefix}/var' 98libdir='${exec_prefix}/lib' 99includedir='${prefix}/include' 100oldincludedir='/usr/include' 101infodir='${prefix}/info' 102mandir='${prefix}/man' 103 104### we might need to use some other shell than /bin/sh for running subshells 105 106### If we are on Windows, search for the shell. This will permit people 107### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure 108### without also having to set CONFIG_SHELL. This code will work when 109### using bash, which sets OSTYPE. 110case "${OSTYPE}" in 111*win32*) 112 if [ x${CONFIG_SHELL} = x ]; then 113 if [ ! -f /bin/sh ]; then 114 if [ x${SHELL} != x ] && [ -f ${SHELL} ]; then 115 CONFIG_SHELL=${SHELL} 116 export CONFIG_SHELL 117 else 118 for prog in sh sh.exe bash bash.exe; do 119 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 120 for dir in $PATH; do 121 test -z "$dir" && dir=. 122 if test -f $dir/$prog; then 123 CONFIG_SHELL=$dir/$prog 124 export CONFIG_SHELL 125 break 126 fi 127 done 128 IFS="$save_ifs" 129 test -n "${CONFIG_SHELL}" && break 130 done 131 fi 132 fi 133 fi 134 ;; 135esac 136 137config_shell=${CONFIG_SHELL-/bin/sh} 138 139NO_EDIT="This file was generated automatically by configure. Do not edit." 140 141## this is a little touchy and won't always work, but... 142## 143## if the argv[0] starts with a slash then it is an absolute name that can (and 144## must) be used as is. 145## 146## otherwise, if argv[0] has no slash in it, we can assume that it is on the 147## path. Since PATH might include "." we also add `pwd` to the end of PATH. 148## 149 150progname=$0 151# if PWD already has a value, it is probably wrong. 152if [ -n "$PWD" ]; then PWD=`pwd`; fi 153 154case "${progname}" in 155/*) ;; 156*/*) ;; 157*) 158 PATH=$PATH:${PWD=`pwd`} ; export PATH 159 ;; 160esac 161 162# Loop over all args 163 164while : 165do 166 167# Break out if there are no more args 168 case $# in 169 0) 170 break 171 ;; 172 esac 173 174# Get the first arg, and shuffle 175 option=$1 176 shift 177 178# Make all options have two hyphens 179 orig_option=$option # Save original for error messages 180 case $option in 181 --*) ;; 182 -*) option=-$option ;; 183 esac 184 185# Split out the argument for options that take them 186 case $option in 187 --*=*) 188 optarg=`echo $option | sed -e 's/^[^=]*=//'` 189 arguments="$arguments $option" 190 ;; 191# These options have mandatory values. Since we didn't find an = sign, 192# the value must be in the next argument 193 --bu* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-* | --bi* | --sb* | --li* | --da* | --sy* | --sh* | --lo* | --in* | --ol* | --ma*) 194 optarg=$1 195 shift 196 arguments="$arguments $option=$optarg" 197 ;; 198 --v) 199 arguments="$arguments -v" 200 ;; 201 --*) 202 arguments="$arguments $option" 203 ;; 204 esac 205 206# Now, process the options 207 case $option in 208 209 --bi*) 210 bindir=$optarg 211 diroptions="$diroptions --bindir=$optarg" 212 ;; 213 --build* | --bu*) 214 case "$build_alias" in 215 "") build_alias=$optarg ;; 216 *) echo '***' Can only configure for one build machine at a time. 1>&2 217 fatal=yes 218 ;; 219 esac 220 ;; 221 --cache*) 222 cache_file=$optarg 223 ;; 224 --da*) 225 datadir=$optarg 226 diroptions="$diroptions --datadir=$optarg" 227 ;; 228 --disable-*) 229 enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'` 230 eval $enableopt=no 231 disableoptions="$disableoptions $option" 232 ;; 233 --enable-*) 234 case "$option" in 235 *=*) ;; 236 *) optarg=yes ;; 237 esac 238 239 enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` 240 eval "$enableopt=\$optarg" 241 enableoptions="$enableoptions '$option'" 242 ;; 243 --exec-prefix* | --ex*) 244 exec_prefix=$optarg 245 exec_prefixoption="--exec-prefix=$optarg" 246 ;; 247 --gas | --g*) 248 gas=yes 249 ;; 250 --help | --he*) 251 fatal=yes 252 ;; 253 --host* | --ho*) 254 case $host_alias in 255 NOHOST) host_alias=$optarg ;; 256 *) echo '***' Can only configure for one host at a time. 1>&2 257 fatal=yes 258 ;; 259 esac 260 ;; 261 --inc*) 262 includedir=$optarg 263 diroptions="$diroptions --includedir=$optarg" 264 ;; 265 --inf*) 266 infodir=$optarg 267 diroptions="$diroptions --infodir=$optarg" 268 ;; 269 --libd*) 270 libdir=$optarg 271 diroptions="$diroptions --libdir=$optarg" 272 ;; 273 --libe*) 274 libexecdir=$optarg 275 diroptions="$diroptions --libexecdir=$optarg" 276 ;; 277 --lo*) 278 localstatedir=$optarg 279 diroptions="$diroptions --localstatedir=$optarg" 280 ;; 281 --ma*) 282 mandir=$optarg 283 diroptions="$diroptions --mandir=$optarg" 284 ;; 285 --nfp | --nf*) 286 floating_point=no 287 floating_pointoption="--nfp" 288 ;; 289 --norecursion | --no*) 290 norecursion=yes 291 ;; 292 --ol*) 293 oldincludedir=$optarg 294 diroptions="$diroptions --oldincludedir=$optarg" 295 ;; 296 --prefix* | --pre*) 297 prefix=$optarg 298 prefixoption="--prefix=$optarg" 299 ;; 300 --program-prefix* | --program-p*) 301 program_prefix=$optarg 302 program_prefixoption="--program-prefix=$optarg" 303 ;; 304 --program-suffix* | --program-s*) 305 program_suffix=$optarg 306 program_suffixoption="--program-suffix=$optarg" 307 ;; 308 --program-transform-name* | --program-t*) 309 # Double any backslashes or dollar signs in the argument 310 program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`" 311 program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'" 312 ;; 313 --rm) 314 removing=--rm 315 ;; 316 --sb*) 317 sbindir=$optarg 318 diroptions="$diroptions --sbindir=$optarg" 319 ;; 320 --sh*) 321 sharedstatedir=$optarg 322 diroptions="$diroptions --sharedstatedir=$optarg" 323 ;; 324 --silent | --sil* | --quiet | --q*) 325 redirect=">/dev/null" 326 verbose=--silent 327 ;; 328 --site* | --sit*) 329 site=$optarg 330 site_option="--site=$optarg" 331 ;; 332 --srcdir*/ | --sr*/) 333 # Remove trailing slashes. Otherwise, when the file name gets 334 # bolted into an object file as debug info, it has two slashes 335 # in it. Ordinarily this is ok, but emacs takes double slash 336 # to mean "forget the first part". 337 srcdir=`echo $optarg | sed -e 's:/$::'` 338 ;; 339 --srcdir* | --sr*) 340 srcdir=$optarg 341 ;; 342 --sy*) 343 sysconfdir=$optarg 344 diroptions="$diroptions --sysconfdir=$optarg" 345 ;; 346 --target* | --ta*) 347 case $target_alias in 348 NOTARGET) target_alias=$optarg ;; 349 *) echo '***' Can only configure for one target at a time. 1>&2 350 fatal=yes 351 ;; 352 esac 353 ;; 354 --tmpdir* | --tm*) 355 TMPDIR=$optarg 356 tmpdiroption="--tmpdir=$optarg" 357 ;; 358 --verbose | --v | --verb*) 359 redirect= 360 verbose=--verbose 361 ;; 362 --version | --V | --vers*) 363 echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'` 364 exit 0 365 ;; 366 --with-*) 367 case "$option" in 368 *=*) ;; 369 *) optarg=yes ;; 370 esac 371 372 withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'` 373 eval $withopt="\$optarg" 374 withoptions="$withoptions $option" 375 ;; 376 --without-*) 377 withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'` 378 eval $withopt=no 379 withoutoptions="$withoutoptions $option" 380 ;; 381 --x) with_x=yes 382 withoptions="$withoptions --with-x" 383 ;; 384 --x-i* | --x-l*) other_options="$other_options $orig_option" 385 ;; 386 --*) 387 echo "configure: Unrecognized option: \"$orig_option\"; use --help for usage." >&2 388 exit 1 389 ;; 390 *) 391 case $undefs in 392 NOUNDEFS) undefs=$option ;; 393 *) echo '***' Can only configure for one host and one target at a time. 1>&2 394 fatal=yes 395 ;; 396 esac 397 ;; 398 esac 399done 400 401# process host and target 402 403# Do some error checking and defaulting for the host and target type. 404# The inputs are: 405# configure --host=HOST --target=TARGET UNDEFS 406# 407# The rules are: 408# 1. You aren't allowed to specify --host, --target, and undefs at the 409# same time. 410# 2. Host defaults to undefs. 411# 3. If undefs is not specified, then host defaults to the current host, 412# as determined by config.guess. 413# 4. Target defaults to undefs. 414# 5. If undefs is not specified, then target defaults to host. 415 416case "${fatal}" in 417"") 418 # Make sure that host, target & undefs aren't all specified at the 419 # same time. 420 case $host_alias---$target_alias---$undefs in 421 NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS) 422 ;; 423 *) echo '***' Can only configure for one host and one target at a time. 1>&2 424 fatal=yes 425 break 2 426 ;; 427 esac 428 429 # Now, do defaulting for host. 430 case $host_alias in 431 NOHOST) 432 case $undefs in 433 NOUNDEFS) 434 # Neither --host option nor undefs were present. 435 # Call config.guess. 436 guesssys=`echo ${progname} | sed 's/configure$/config.guess/'` 437 if host_alias=`${config_shell} ${guesssys}` 438 then 439 # If the string we are going to use for 440 # the target is a prefix of the string 441 # we just guessed for the host, then 442 # assume we are running native, and force 443 # the same string for both target and host. 444 case $target_alias in 445 NOTARGET) ;; 446 *) 447 if expr $host_alias : $target_alias >/dev/null 448 then 449 host_alias=$target_alias 450 fi 451 ;; 452 esac 453 echo "Configuring for a ${host_alias} host." 454 arguments="--host=$host_alias $arguments" 455 else 456 echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2 457 fatal=yes 458 fi 459 ;; 460 *) 461 host_alias=$undefs 462 arguments="--host=$host_alias $arguments" 463 undefs=NOUNDEFS 464 ;; 465 esac 466 esac 467 468 # Do defaulting for target. If --target option isn't present, default 469 # to undefs. If undefs isn't present, default to host. 470 case $target_alias in 471 NOTARGET) 472 case $undefs in 473 NOUNDEFS) 474 target_alias=$host_alias 475 ;; 476 *) 477 target_alias=$undefs 478 arguments="--target=$target_alias $arguments" 479 ;; 480 esac 481 esac 482 ;; 483*) ;; 484esac 485 486if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then 487 exec 1>&2 488 echo Usage: configure [OPTIONS] [HOST] 489 echo 490 echo Options: [defaults in brackets] 491 echo ' --prefix=MYDIR install into MYDIR [/usr/local]' 492 echo ' --exec-prefix=MYDIR install host-dependent files into MYDIR [/usr/local]' 493 echo ' --help print this message [normal config]' 494 echo ' --build=BUILD configure for building on BUILD [BUILD=HOST]' 495 echo ' --host=HOST configure for HOST [determined via config.guess]' 496 echo ' --norecursion configure this directory only [recurse]' 497 echo ' --program-prefix=FOO prepend FOO to installed program names [""]' 498 echo ' --program-suffix=FOO append FOO to installed program names [""]' 499 echo ' --program-transform-name=P transform installed names by sed pattern P [""]' 500 echo ' --site=SITE configure with site-specific makefile for SITE' 501 echo ' --srcdir=DIR find the sources in DIR [. or ..]' 502 echo ' --target=TARGET configure for TARGET [TARGET=HOST]' 503 echo ' --tmpdir=TMPDIR create temporary files in TMPDIR [/tmp]' 504 echo ' --nfp configure for software floating point [hard float]' 505 echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)' 506 echo ' --without-FOO package FOO is NOT available' 507 echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)' 508 echo ' --disable-FOO do not include feature FOO' 509 echo 510 echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.' 511 echo 512 if [ -r config.status ] ; then 513 cat config.status 514 fi 515 516 exit 1 517fi 518 519configsub=`echo ${progname} | sed 's/configure$/config.sub/'` 520moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'` 521## the sed command below emulates the dirname command 522topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; pwd` 523 524 525# this is a hack. sun4 must always be a valid host alias or this will fail. 526if ${config_shell} ${configsub} sun4 >/dev/null 2>&1 ; then 527 true 528else 529 echo '***' cannot find config.sub. 1>&2 530 exit 1 531fi 532 533touch config.junk 534if ${config_shell} ${moveifchange} config.junk config.trash ; then 535 true 536else 537 echo '***' cannot find move-if-change. 1>&2 538 exit 1 539fi 540rm -f config.junk config.trash 541 542case "${srcdir}" in 543"") 544 if [ -r configure.in ] ; then 545 srcdir=. 546 else 547 if [ -r ${progname}.in ] ; then 548 srcdir=`echo ${progname} | sed 's:/configure$::'` 549 else 550 echo '***' "Can't find configure.in. Try using --srcdir=some_dir" 1>&2 551 exit 1 552 fi 553 fi 554 ;; 555*) 556 # Set srcdir to "." if that's what it is. 557 # This is important for multilib support. 558 if [ ! -d ${srcdir} ] ; then 559 echo "Invalid source directory ${srcdir}" >&2 560 exit 1 561 fi 562 pwd=`pwd` 563 srcpwd=`cd ${srcdir} ; pwd` 564 if [ "${pwd}" = "${srcpwd}" ] ; then 565 srcdir=. 566 fi 567esac 568 569### warn about some conflicting configurations. 570 571case "${srcdir}" in 572".") ;; 573*) 574 if [ -f ${srcdir}/config.status ] ; then 575 echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2 576 exit 1 577 fi 578esac 579 580# default exec_prefix 581case "${exec_prefixoption}" in 582"") exec_prefix="\$(prefix)" ;; 583*) ;; 584esac 585 586# Define the trigger file to make sure configure will re-run whenever 587# the gcc version number changes. 588if [ "${with_gcc_version_trigger+set}" = set ]; then 589 gcc_version_trigger="$with_gcc_version_trigger" 590 gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'` 591else 592 # If gcc's sources are available, define the trigger file. 593 if [ -f ${topsrcdir}/gcc/version.c ] ; then 594 gcc_version_trigger=${topsrcdir}/gcc/version.c 595 gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'` 596 case "$arguments" in 597 *--with-gcc-version-trigger=$gcc_version_trigger* ) 598 ;; 599 * ) 600 # Make sure configure.in knows about this. 601 arguments="--with-gcc-version-trigger=$gcc_version_trigger $arguments" 602 ;; 603 esac 604 withoptions="--with-gcc-version-trigger=$gcc_version_trigger $withoptions" 605 fi 606fi 607 608### break up ${srcdir}/configure.in. 609case "`grep '^# per\-host:' ${srcdir}/configure.in`" in 610"") 611 echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2 612 # Check for a directory that's been converted to use autoconf since 613 # it was last configured. 614 if grep AC_OUTPUT ${srcdir}/configure.in >/dev/null ; then 615 echo '***' Hmm, looks like this directory has been autoconfiscated. 1>&2 616 if [ -r ${srcdir}/configure ] ; then 617 echo '***' Running the local configure script. 1>&2 618 case "${cache_file}" in 619 "") cache_file_option= ;; 620 *) cache_file_option="--cache-file=${cache_file}" ;; 621 esac 622 srcdiroption="--srcdir=${srcdir}" 623 case "${build_alias}" in 624 "") buildopt= ;; 625 *) buildopt="--build=${build_alias}" ;; 626 esac 627 eval exec ${config_shell} ${srcdir}/configure ${verbose} \ 628 ${buildopt} --host=${host_alias} --target=${target_alias} \ 629 ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \ 630 ${srcdiroption} ${diroptions} \ 631 ${program_prefixoption} ${program_suffixoption} \ 632 ${program_transform_nameoption} ${site_option} \ 633 ${withoptions} ${withoutoptions} \ 634 ${enableoptions} ${disableoptions} ${floating_pointoption} \ 635 ${cache_file_option} ${removing} ${other_options} ${redirect} 636 else 637 echo '***' There is no configure script present though. 1>&2 638 fi 639 fi 640 exit 1 641 ;; 642*) ;; 643esac 644 645case "`grep '^# per\-target:' ${srcdir}/configure.in`" in 646"") 647 echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2 648 exit 1 649 ;; 650*) ;; 651esac 652 653case "${TMPDIR}" in 654"") TMPDIR=/tmp ; export TMPDIR ;; 655*) ;; 656esac 657 658# keep this filename short for &%*%$*# 14 char file names and 8+3 file names 659tmpfile=${TMPDIR}/cNf$$ 660# Note that under many versions of sh a trap handler for 0 will *override* any 661# exit status you explicitly specify! At this point, the only non-error exit 662# is at the end of the script; these actions are duplicated there, minus 663# the "exit 1". Don't use "exit 0" anywhere after this without resetting the 664# trap handler, or you'll lose. 665trap "rm -f Makefile.tem ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos; exit 1" 0 1 2 15 666 667# split ${srcdir}/configure.in into common, per-host, per-target, 668# and post-target parts. Post-target is optional. 669sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com 670sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst 671if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then 672 sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt 673 sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos 674else 675 sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt 676 echo >${tmpfile}.pos 677fi 678 679### do common part of configure.in 680 681# If the language specific compiler does not exist, but the "gcc" directory does, 682# we will skip this directory; in this case the sub-directory's common part 683# of configure.in will create a small shell script "skip-this-dir" containing 684# commands to completely clean up any temporary or created files. 685 686. ${tmpfile}.com 687 688if test -f skip-this-dir; then 689 # Perform the same cleanup as the trap handler, minus the "exit 1" of course, 690 # and reset the trap handler. 691 trap 0 692 rm -f Makefile* ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos 693 # Execute the final clean-up actions 694 ${config_shell} skip-this-dir 695 # and stop configuring this directory. 696 exit 0 697fi 698 699# some sanity checks on configure.in 700case "${srctrigger}" in 701"") 702 echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in. 1>&2 703 exit 1 704 ;; 705*) ;; 706esac 707 708case "${build_alias}" in 709"") 710 if result=`${config_shell} ${configsub} ${host_alias}` ; then 711 build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` 712 build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` 713 build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` 714 build=${build_cpu}-${build_vendor}-${build_os} 715 build_alias=${host_alias} 716 fi 717 ;; 718*) 719 if result=`${config_shell} ${configsub} ${build_alias}` ; then 720 buildopt="--build=${build_alias}" 721 build_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` 722 build_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` 723 build_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` 724 build=${build_cpu}-${build_vendor}-${build_os} 725 else 726 echo "Unrecognized build system name ${build_alias}." 1>&2 727 exit 1 728 fi 729 ;; 730esac 731 732if result=`${config_shell} ${configsub} ${host_alias}` ; then 733 true 734else 735 echo "Unrecognized host system name ${host_alias}." 1>&2 736 exit 1 737fi 738host_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` 739host_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` 740host_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` 741host=${host_cpu}-${host_vendor}-${host_os} 742 743. ${tmpfile}.hst 744 745if result=`${config_shell} ${configsub} ${target_alias}` ; then 746 true 747else 748 echo "Unrecognized target system name ${target_alias}." 1>&2 749 exit 1 750fi 751target_cpu=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` 752target_vendor=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` 753target_os=`echo $result | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` 754target=${target_cpu}-${target_vendor}-${target_os} 755 756. ${tmpfile}.tgt 757 758# Find the source files, if location was not specified. 759case "${srcdir}" in 760"") 761 srcdirdefaulted=1 762 srcdir=. 763 if [ ! -r ${srctrigger} ] ; then 764 srcdir=.. 765 fi 766 ;; 767*) ;; 768esac 769 770if [ ! -r ${srcdir}/${srctrigger} ] ; then 771 case "${srcdirdefaulted}" in 772 "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;; 773 *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;; 774 esac 775 776 echo '***' \(At least ${srctrigger} is missing.\) 1>&2 777 exit 1 778fi 779 780# Some systems (e.g., one of the i386-aix systems the gas testers are 781# using) don't handle "\$" correctly, so don't use it here. 782tooldir='$(exec_prefix)'/${target_alias} 783 784if [ "${host_alias}" != "${target_alias}" ] ; then 785 if [ "${program_prefixoption}" = "" ] ; then 786 if [ "${program_suffixoption}" = "" ] ; then 787 if [ "${program_transform_nameoption}" = "" ] ; then 788 program_prefix=${target_alias}- ; 789 fi 790 fi 791 fi 792fi 793 794# Merge program_prefix and program_suffix onto program_transform_name. 795# (program_suffix used to use $, but it's hard to preserve $ through both 796# make and sh.) 797if [ "${program_suffix}" != "" ] ; then 798 program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}" 799fi 800 801if [ "${program_prefix}" != "" ] ; then 802 program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}" 803fi 804 805# If CC and CXX are not set in the environment, and the Makefile 806# exists, try to extract them from it. This is to handle running 807# ./config.status by hand. 808if [ -z "${CC}" ] && [ -r Makefile ]; then 809 sed -n -e ':loop 810/\\$/ N 811s/\\\n//g 812t loop 813/^CC[ ]*=/ s/CC[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc 814 CC=`tail -1 Makefile.cc` 815 rm -f Makefile.cc 816fi 817 818if [ -z "${CFLAGS}" ] && [ -r Makefile ]; then 819 sed -n -e ':loop 820/\\$/ N 821s/\\\n//g 822t loop 823/^CFLAGS[ ]*=/ s/CFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc 824 CFLAGS=`tail -1 Makefile.cc` 825 rm -f Makefile.cc 826fi 827 828if [ -z "${CXX}" ] && [ -r Makefile ]; then 829 sed -n -e ':loop 830/\\$/ N 831s/\\\n//g 832t loop 833/^CXX[ ]*=/ s/CXX[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc 834 CXX=`tail -1 Makefile.cc` 835 rm -f Makefile.cc 836fi 837 838if [ -z "${CXXFLAGS}" ] && [ -r Makefile ]; then 839 sed -n -e ':loop 840/\\$/ N 841s/\\\n//g 842t loop 843/^CXXFLAGS[ ]*=/ s/CXXFLAGS[ ]*=[ ]*\(.*\)/\1/p' < Makefile > Makefile.cc 844 CXXFLAGS=`tail -1 Makefile.cc` 845 rm -f Makefile.cc 846fi 847 848# Generate a default definition for YACC. This is used if the makefile can't 849# locate bison or byacc in objdir. 850 851for prog in 'bison -y' byacc yacc 852do 853 set dummy $prog; tmp=$2 854 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 855 for dir in $PATH; do 856 test -z "$dir" && dir=. 857 if test -f $dir/$tmp; then 858 DEFAULT_YACC="$prog" 859 break 860 fi 861 done 862 IFS="$save_ifs" 863 864 test -n "$DEFAULT_YACC" && break 865done 866 867# Generate a default definition for M4. This is used if the makefile can't 868# locate m4 in objdir. 869 870for prog in gm4 gnum4 m4 871do 872 set dummy $prog; tmp=$2 873 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 874 for dir in $PATH; do 875 test -z "$dir" && dir=. 876 if test -f $dir/$tmp; then 877 DEFAULT_M4="$prog" 878 break 879 fi 880 done 881 IFS="$save_ifs" 882 883 test -n "$DEFAULT_M4" && break 884done 885 886# Generate a default definition for LEX. This is used if the makefile can't 887# locate flex in objdir. 888 889for prog in flex lex 890do 891 set dummy $prog; tmp=$2 892 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 893 for dir in $PATH; do 894 test -z "$dir" && dir=. 895 if test -f $dir/$tmp; then 896 DEFAULT_LEX="$prog" 897 break 898 fi 899 done 900 IFS="$save_ifs" 901 902 test -n "$DEFAULT_LEX" && break 903done 904 905if [ "${build}" != "${host}" ]; then 906 # If we are doing a Canadian Cross, in which the host and build systems 907 # are not the same, we set reasonable default values for the tools. 908 909 tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD" 910 tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET" 911 tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET HOST_PREFIX" 912 tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM" 913 tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET" 914 tools="${tools} WINDRES WINDRES_FOR_TARGET YACC" 915 tools="${tools} OBJCOPY OBJDUMP" 916 917 for var in ${tools}; do 918 if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then 919 sed -n -e ':loop 920/\\$/ N 921s/\\\n//g 922t loop 923/^'"${var}"'[ ]*=/ s/'"${var}"'[ ]*=[ ]*\(.*\)/\1/p' \ 924 < Makefile > Makefile.v 925 t=`tail -1 Makefile.v` 926 if [ -n "${t}" ]; then 927 eval "${var}=\${t}" 928 fi 929 rm -f Makefile.v 930 fi 931 done 932 933 AR=${AR-${host_alias}-ar} 934 AR_FOR_TARGET=${AR_FOR_TARGET-${target_alias}-ar} 935 AS=${AS-${host_alias}-as} 936 AS_FOR_TARGET=${AS_FOR_TARGET-${target_alias}-as} 937 BISON=${BISON-bison} 938 CC=${CC-${host_alias}-gcc} 939 CFLAGS=${CFLAGS-"-g -O2"} 940 CXX=${CXX-${host_alias}-c++} 941 CXXFLAGS=${CXXFLAGS-"-g -O2"} 942 CC_FOR_BUILD=${CC_FOR_BUILD-gcc} 943 CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc} 944 CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} 945 DLLTOOL=${DLLTOOL-${host_alias}-dlltool} 946 DLLTOOL_FOR_TARGET=${DLLTOOL_FOR_TARGET-${target_alias}-dlltool} 947 GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} 948 HOST_PREFIX=${build_alias}- 949 HOST_PREFIX_1=${build_alias}- 950 LD=${LD-${host_alias}-ld} 951 LD_FOR_TARGET=${LD_FOR_TARGET-${target_alias}-ld} 952 MAKEINFO=${MAKEINFO-makeinfo} 953 NM=${NM-${host_alias}-nm} 954 NM_FOR_TARGET=${NM_FOR_TARGET-${target_alias}-nm} 955 RANLIB=${RANLIB-${host_alias}-ranlib} 956 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib} 957 WINDRES=${WINDRES-${host_alias}-windres} 958 WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres} 959 OBJCOPY=${OBJCOPY-${host_alias}-objcopy} 960 OBJDUMP=${OBJDUMP-${host_alias}-objdump} 961 962 if [ -z "${YACC}" ]; then 963 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 964 for dir in $PATH; do 965 test -z "$dir" && dir=. 966 if test -f $dir/bison; then 967 YACC="bison -y" 968 break 969 fi 970 if test -f $dir/byacc; then 971 YACC=byacc 972 break 973 fi 974 if test -f $dir/yacc; then 975 YACC=yacc 976 break 977 fi 978 done 979 IFS="$save_ifs" 980 if [ -z "${YACC}" ]; then 981 YACC="bison -y" 982 fi 983 fi 984 985 if [ -z "${LEX}" ]; then 986 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 987 for dir in $PATH; do 988 test -z "$dir" && dir=. 989 if test -f $dir/flex; then 990 LEX=flex 991 break 992 fi 993 if test -f $dir/lex; then 994 LEX=lex 995 break 996 fi 997 done 998 IFS="$save_ifs" 999 LEX=${LEX-flex} 1000 fi 1001 1002 # Export variables which autoconf might try to set. 1003 export AS 1004 export AR 1005 export CC_FOR_BUILD 1006 export DLLTOOL 1007 export LD 1008 export NM 1009 export RANLIB 1010 export WINDRES 1011 export OBJCOPY 1012 export OBJDUMP 1013else 1014 # If CC is still not set, try to get gcc. 1015 if [ -z "${CC}" ]; then 1016 IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" 1017 for dir in $PATH; do 1018 test -z "$dir" && dir=. 1019 if test -f $dir/gcc; then 1020 CC="gcc" 1021 echo 'void f(){}' > conftest.c 1022 if test -z "`${CC} -g -c conftest.c 2>&1`"; then 1023 CFLAGS=${CFLAGS-"-g -O2"} 1024 CXXFLAGS=${CXXFLAGS-"-g -O2"} 1025 else 1026 CFLAGS=${CFLAGS-"-O2"} 1027 CXXFLAGS=${CXXFLAGS-"-O2"} 1028 fi 1029 rm -f conftest* 1030 break 1031 fi 1032 done 1033 IFS="$save_ifs" 1034 CC=${CC-cc} 1035 else 1036 if test -z "${CFLAGS}"; then 1037 # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC 1038 # is set to a version of gcc. 1039 case "${CC}" in 1040 *gcc) 1041 echo 'void f(){}' > conftest.c 1042 if test -z "`${CC} -g -c conftest.c 2>&1`"; then 1043 CFLAGS=${CFLAGS-"-g -O2"} 1044 CXXFLAGS=${CXXFLAGS-"-g -O2"} 1045 else 1046 CFLAGS=${CFLAGS-"-O2"} 1047 CXXFLAGS=${CXXFLAGS-"-O2"} 1048 fi 1049 rm -f conftest* 1050 ;; 1051 esac 1052 fi 1053 fi 1054 1055 CXX=${CXX-"c++"} 1056 CFLAGS=${CFLAGS-"-g"} 1057 CXXFLAGS=${CXXFLAGS-"-g -O2"} 1058fi 1059 1060export CC 1061export CXX 1062export CFLAGS 1063export CXXFLAGS 1064 1065# FIXME: This should be in configure.in, not configure 1066case "$host" in 1067 *go32*) 1068 enable_gdbtk=no ;; 1069 *msdosdjgpp*) 1070 enable_gdbtk=no ;; 1071esac 1072 1073# FIXME: This should be in configure.in, not configure 1074# Determine whether gdb needs tk/tcl or not. 1075if [ "$enable_gdbtk" != "no" ]; then 1076 GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui" 1077else 1078 GDB_TK="" 1079fi 1080 1081all_build_modules= 1082if test x"${build_alias}" != x"${host_alias}" 1083then 1084 all_build_modules='$(ALL_BUILD_MODULES_LIST)' 1085fi 1086 1087for subdir in . ${subdirs} ; do 1088 1089 # ${subdir} is relative path from . to the directory we're currently 1090 # configuring. 1091 # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed. 1092 invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'` 1093 1094 ### figure out what to do with srcdir 1095 case "${srcdir}" in 1096 ".") # no -srcdir option. We're building in place. 1097 makesrcdir=. ;; 1098 /*) # absolute path 1099 makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'` 1100 ;; 1101 *) # otherwise relative 1102 case "${subdir}" in 1103 .) makesrcdir=${srcdir} ;; 1104 *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;; 1105 esac 1106 ;; 1107 esac 1108 1109 if [ "${subdir}/" != "./" ] ; then 1110 Makefile=${subdir}/Makefile 1111 fi 1112 1113 if [ ! -d ${subdir} ] ; then 1114 if mkdir ${subdir} ; then 1115 true 1116 else 1117 echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2 1118 exit 1 1119 fi 1120 fi 1121 1122 case "${removing}" in 1123 "") 1124 case "${subdir}" in 1125 .) ;; 1126 *) eval echo Building in ${subdir} ${redirect} ;; 1127 esac 1128 1129 # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest) 1130 # Set up the list of links to be made. 1131 # ${links} is the list of link names, and ${files} is the list of names to link to. 1132 1133 # Make the links. 1134 configlinks="${links}" 1135 if [ -r ${subdir}/config.status ] ; then 1136 mv -f ${subdir}/config.status ${subdir}/config.back 1137 fi 1138 while [ -n "${files}" ] ; do 1139 # set file to car of files, files to cdr of files 1140 set ${files}; file=$1; shift; files=$* 1141 set ${links}; link=$1; shift; links=$* 1142 1143 if [ ! -r ${srcdir}/${file} ] ; then 1144 if [ ! -r ${file} ] ; then 1145 1146 echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2 1147 echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2 1148 exit 1 1149 else 1150 srcfile=${file} 1151 fi 1152 else 1153 srcfile=${srcdir}/${file} 1154 fi 1155 1156 ${remove} -f ${link} 1157 # Make a symlink if possible, otherwise try a hard link 1158 if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then 1159 true 1160 else 1161 # We need to re-remove the file because Lynx leaves a 1162 # very strange directory there when it fails an NFS symlink. 1163 ${remove} -r -f ${link} 1164 ${hard_link} ${srcfile} ${link} 1165 fi 1166 if [ ! -r ${link} ] ; then 1167 echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2 1168 exit 1 1169 fi 1170 1171 echo "Linked \"${link}\" to \"${srcfile}\"." 1172 done 1173 1174 # Create a .gdbinit file which runs the one in srcdir 1175 # and tells GDB to look there for source files. 1176 1177 if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then 1178 case ${srcdir} in 1179 .) ;; 1180 *) cat > ${subdir}/.gdbinit <<EOF 1181# ${NO_EDIT} 1182dir ${makesrcdir} 1183dir . 1184source ${makesrcdir}/.gdbinit 1185EOF 1186 ;; 1187 esac 1188 fi 1189 1190 # Install a makefile, and make it set VPATH 1191 # if necessary so that the sources are found. 1192 # Also change its value of srcdir. 1193 # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has 1194 # been somewhat optimized and is perhaps a bit twisty. 1195 1196 # code is order so as to try to sed the smallest input files we know. 1197 # so do these separately because I don't trust the order of sed -e expressions. 1198 1199 # the five makefile fragments MUST end up in the resulting Makefile in this order: 1200 # package macros, target, host, site, and package rules. 1201 1202 if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then 1203 1204 # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem. 1205 rm -f ${subdir}/${Makefile}.tem 1206 case "${package_makefile_rules_frag}" in 1207 "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;; 1208 *) 1209 if [ ! -f ${package_makefile_rules_frag} ] ; then 1210 package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag} 1211 fi 1212 if [ -f ${package_makefile_rules_frag} ] ; then 1213 sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem 1214 else 1215 echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2 1216 echo '***' is missing in ${PWD=`pwd`}. 1>&2 1217 cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem 1218 fi 1219 esac 1220 # working copy now in ${Makefile}.tem 1221 1222 # Conditionalize for this site. 1223 rm -f ${Makefile} 1224 case "${site}" in 1225 "") mv ${subdir}/Makefile.tem ${Makefile} ;; 1226 *) 1227 site_makefile_frag=${srcdir}/config/ms-${site} 1228 1229 if [ -f ${site_makefile_frag} ] ; then 1230 sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \ 1231 > ${Makefile} 1232 else 1233 mv ${subdir}/Makefile.tem ${Makefile} 1234 site_makefile_frag= 1235 fi 1236 ;; 1237 esac 1238 # working copy now in ${Makefile} 1239 1240 # Conditionalize the makefile for this host. 1241 rm -f ${subdir}/Makefile.tem 1242 case "${host_makefile_frag}" in 1243 "") mv ${Makefile} ${subdir}/Makefile.tem ;; 1244 *) 1245 if [ ! -f ${host_makefile_frag} ] ; then 1246 host_makefile_frag=${srcdir}/${host_makefile_frag} 1247 fi 1248 if [ -f ${host_makefile_frag} ] ; then 1249 sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem 1250 else 1251 echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2 1252 echo '***' is missing in ${PWD=`pwd`}. 1>&2 1253 mv ${Makefile} ${subdir}/Makefile.tem 1254 fi 1255 esac 1256 # working copy now in ${subdir)/Makefile.tem 1257 1258 # Conditionalize the makefile for this target. 1259 rm -f ${Makefile} 1260 case "${target_makefile_frag}" in 1261 "") mv ${subdir}/Makefile.tem ${Makefile} ;; 1262 *) 1263 if [ ! -f ${target_makefile_frag} ] ; then 1264 target_makefile_frag=${srcdir}/${target_makefile_frag} 1265 fi 1266 if [ -f ${target_makefile_frag} ] ; then 1267 sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile} 1268 else 1269 mv ${subdir}/Makefile.tem ${Makefile} 1270 target_makefile_frag= 1271 fi 1272 ;; 1273 esac 1274 # working copy now in ${Makefile} 1275 1276 # Emit the default values of this package's macros. 1277 rm -f ${subdir}/Makefile.tem 1278 case "${package_makefile_frag}" in 1279 "") mv ${Makefile} ${subdir}/Makefile.tem ;; 1280 *) 1281 if [ ! -f ${package_makefile_frag} ] ; then 1282 package_makefile_frag=${srcdir}/${package_makefile_frag} 1283 fi 1284 if [ -f ${package_makefile_frag} ] ; then 1285 sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem 1286 else 1287 echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2 1288 echo '***' is missing in ${PWD=`pwd`}. 1>&2 1289 mv ${Makefile} ${subdir}/Makefile.tem 1290 fi 1291 esac 1292 # real copy now in ${subdir}/Makefile.tem 1293 1294 # prepend warning about editting, and a bunch of variables. 1295 rm -f ${Makefile} 1296 cat > ${Makefile} <<EOF 1297# ${NO_EDIT} 1298VPATH = ${makesrcdir} 1299links = ${configlinks} 1300host_alias = ${host_alias} 1301host_cpu = ${host_cpu} 1302host_vendor = ${host_vendor} 1303host_os = ${host_os} 1304host_canonical = ${host_cpu}-${host_vendor}-${host_os} 1305target_alias = ${target_alias} 1306target_cpu = ${target_cpu} 1307target_vendor = ${target_vendor} 1308target_os = ${target_os} 1309target_canonical = ${target_cpu}-${target_vendor}-${target_os} 1310EOF 1311 case "${build}" in 1312 "") ;; 1313 *) cat >> ${Makefile} << EOF 1314build_alias = ${build_alias} 1315build_cpu = ${build_cpu} 1316build_vendor = ${build_vendor} 1317build_os = ${build_os} 1318build_canonical = ${build_cpu}-${build_vendor}-${build_os} 1319EOF 1320 esac 1321 1322 case "${package_makefile_frag}" in 1323 "") ;; 1324 /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;; 1325 *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;; 1326 esac 1327 1328 case "${target_makefile_frag}" in 1329 "") ;; 1330 /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;; 1331 *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;; 1332 esac 1333 1334 case "${host_makefile_frag}" in 1335 "") ;; 1336 /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;; 1337 *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;; 1338 esac 1339 1340 if [ "${site_makefile_frag}" != "" ] ; then 1341 echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile} 1342 fi 1343 1344 # record if we want to build shared libs. 1345 if test -z "${enable_shared}"; then 1346 echo enable_shared = no >> ${Makefile} 1347 else 1348 echo enable_shared = ${enable_shared} >> ${Makefile} 1349 fi 1350 # record if we want to rumtime library stuff installed in libsubdir. 1351 if test -z "${enable_version_specific_runtime_libs}"; then 1352 echo enable_version_specific_runtime_libs = no >> ${Makefile} 1353 else 1354 echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile} 1355 fi 1356 1357 # Emit a macro which describes the file containing gcc's 1358 # version number. 1359 echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile} 1360 # And emit a macro defining gcc's version number. 1361 echo gcc_version = ${gcc_version} >> ${Makefile} 1362 1363 # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS, 1364 # remove any form feeds. 1365 if [ -z "${subdirs}" ]; then 1366 rm -f ${subdir}/Makefile.tm2 1367 sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \ 1368 -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \ 1369 ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2 1370 rm -f ${subdir}/Makefile.tem 1371 mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem 1372 fi 1373 sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \ 1374 -e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \ 1375 -e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \ 1376 -e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \ 1377 -e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \ 1378 -e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \ 1379 -e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \ 1380 -e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \ 1381 -e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \ 1382 -e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \ 1383 -e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \ 1384 -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \ 1385 -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \ 1386 -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \ 1387 -e "s|^ALL_BUILD_MODULES =.*|ALL_BUILD_MODULES =${all_build_modules}|" \ 1388 -e "/^CC[ ]*=/{ 1389 :loop1 1390 /\\\\$/ N 1391 s/\\\\\\n//g 1392 t loop1 1393 s%^CC[ ]*=.*$%CC = ${CC}% 1394 }" \ 1395 -e "/^CXX[ ]*=/{ 1396 :loop2 1397 /\\\\$/ N 1398 s/\\\\\\n//g 1399 t loop2 1400 s%^CXX[ ]*=.*$%CXX = ${CXX}% 1401 }" \ 1402 -e "/^CFLAGS[ ]*=/{ 1403 :loop3 1404 /\\\\$/ N 1405 s/\\\\\\n//g 1406 t loop3 1407 s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}% 1408 }" \ 1409 -e "/^CXXFLAGS[ ]*=/{ 1410 :loop4 1411 /\\\\$/ N 1412 s/\\\\\\n//g 1413 t loop4 1414 s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}% 1415 }" \ 1416 -e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \ 1417 -e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \ 1418 -e "s///" \ 1419 -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \ 1420 -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \ 1421 -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \ 1422 -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \ 1423 -e "s|^build_tooldir[ ]*=.*$|build_tooldir = ${tooldir}|" \ 1424 -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \ 1425 -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \ 1426 -e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \ 1427 ${subdir}/Makefile.tem >> ${Makefile} 1428 1429 sed -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem 1430 mv -f ${Makefile}.tem ${Makefile} 1431 1432 # If this is a Canadian Cross, preset the values of many more 1433 # tools. 1434 if [ "${build}" != "${host}" ]; then 1435 for var in ${tools}; do 1436 eval val=\$${var} 1437 sed -e "/^${var}[ ]*=/{ 1438 :loop1 1439 /\\\\$/ N 1440 /\\\\$/ b loop1 1441 s/\\\\\\n//g 1442 s%^${var}[ ]*=.*$%${var} = ${val}% 1443 }" ${Makefile} > ${Makefile}.tem 1444 mv -f ${Makefile}.tem ${Makefile} 1445 done 1446 fi 1447 1448 # final copy now in ${Makefile} 1449 1450 else 1451 echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2 1452 fi 1453 1454 rm -f ${subdir}/Makefile.tem 1455 1456 case "${host_makefile_frag}" in 1457 "") using= ;; 1458 *) using="and \"${host_makefile_frag}\"" ;; 1459 esac 1460 1461 case "${target_makefile_frag}" in 1462 "") ;; 1463 *) using="${using} and \"${target_makefile_frag}\"" ;; 1464 esac 1465 1466 case "${site_makefile_frag}" in 1467 "") ;; 1468 *) using="${using} and \"${site_makefile_frag}\"" ;; 1469 esac 1470 1471 newusing=`echo "${using}" | sed 's/and/using/'` 1472 using=${newusing} 1473 echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using} 1474 1475 . ${tmpfile}.pos 1476 1477 # describe the chosen configuration in config.status. 1478 # Make that file a shellscript which will reestablish 1479 # the same configuration. Used in Makefiles to rebuild 1480 # Makefiles. 1481 1482 case "${norecursion}" in 1483 "") arguments="${arguments} --norecursion" ;; 1484 *) ;; 1485 esac 1486 1487 if [ ${subdir} = . ] ; then 1488 echo "#!/bin/sh 1489# ${NO_EDIT} 1490# This directory was configured as follows: 1491${progname}" ${arguments} " 1492# ${using}" > ${subdir}/config.new 1493 else 1494 echo "#!/bin/sh 1495# ${NO_EDIT} 1496# This directory was configured as follows: 1497cd ${invsubdir} 1498${progname}" ${arguments} " 1499# ${using}" > ${subdir}/config.new 1500 fi 1501 chmod a+x ${subdir}/config.new 1502 if [ -r ${subdir}/config.back ] ; then 1503 mv -f ${subdir}/config.back ${subdir}/config.status 1504 fi 1505 ${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status 1506 ;; 1507 1508 *) rm -f ${Makefile} ${subdir}/config.status ${links} ;; 1509 esac 1510done 1511 1512# If there are subdirectories, then recur. 1513if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then 1514 for configdir in ${configdirs} ${extraconfigdirs} ; do 1515 1516 # If configdir contains ',' it is 1517 # srcdir,builddir,target_alias 1518 # These come from extraconfigdirs. 1519 case ${configdir} in 1520 *,*) 1521 eval `echo ${configdir} | sed -e 's/\([^,]*\),\([^,]*\),\(.*\)/cfg_dir=\1 bld_dir=\2 tgt_alias=\3/'` 1522 ;; 1523 *) 1524 cfg_dir=${configdir} 1525 bld_dir=${configdir} 1526 tgt_alias=${target_alias} 1527 ;; 1528 esac 1529 1530 if [ -d ${srcdir}/${cfg_dir} ] ; then 1531 eval echo Configuring ${configdir}... ${redirect} 1532 case "${srcdir}" in 1533 ".") ;; 1534 *) 1535 if [ ! -d ./${bld_dir} ] ; then 1536 if mkdir ./${bld_dir} ; then 1537 true 1538 else 1539 echo '***' "${progname}: could not make ${PWD=`pwd`}/${bld_dir}" 1>&2 1540 exit 1 1541 fi 1542 fi 1543 ;; 1544 esac 1545 1546 POPDIR=${PWD=`pwd`} 1547 cd ${bld_dir} 1548 1549### figure out what to do with srcdir 1550 case "${srcdir}" in 1551 ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place. 1552 /*) # absolute path 1553 newsrcdir=${srcdir}/${cfg_dir} 1554 srcdiroption="--srcdir=${newsrcdir}" 1555 ;; 1556 ?:*) # absolute path on win32 1557 newsrcdir=${srcdir}/${cfg_dir} 1558 srcdiroption="--srcdir=${newsrcdir}" 1559 ;; 1560 *) # otherwise relative 1561 newsrcdir=../${srcdir}/${cfg_dir} 1562 srcdiroption="--srcdir=${newsrcdir}" 1563 ;; 1564 esac 1565 1566 # Handle --cache-file=../XXX 1567 case "${cache_file}" in 1568 "") # empty 1569 ;; 1570 /*) # absolute path 1571 cache_file_option="--cache-file=${cache_file}" 1572 ;; 1573 ?:*) # absolute path on win32 1574 cache_file_option="--cache-file=${cache_file}" 1575 ;; 1576 *) # relative path 1577 cache_file_option="--cache-file=../${cache_file}" 1578 ;; 1579 esac 1580 1581### check for guested configure, otherwise fix possibly relative progname 1582 if [ -f ${newsrcdir}/configure ] ; then 1583 recprog=${newsrcdir}/configure 1584 elif [ -f ${newsrcdir}/configure.in ] ; then 1585 case "${progname}" in 1586 /*) recprog=${progname} ;; 1587 ?:*) recprog=${progname} ;; 1588 *) recprog=../${progname} ;; 1589 esac 1590 else 1591 eval echo No configuration information in ${cfg_dir} ${redirect} 1592 recprog= 1593 fi 1594 1595### The recursion line is here. 1596 if [ ! -z "${recprog}" ] ; then 1597 if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \ 1598 ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \ 1599 ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then 1600 true 1601 else 1602 echo Configure in `pwd` failed, exiting. 1>&2 1603 exit 1 1604 fi 1605 fi 1606 1607 cd ${POPDIR} 1608 fi 1609 done 1610fi 1611 1612# Perform the same cleanup as the trap handler, minus the "exit 1" of course, 1613# and reset the trap handler. 1614rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos 1615trap 0 1616 1617exit 0 1618 1619# 1620# Local Variables: 1621# fill-column: 131 1622# End: 1623# 1624 1625# end of configure 1626