mbuf.h revision 289492
1/*- 2 * Copyright (c) 1982, 1986, 1988, 1993 3 * The Regents of the University of California. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the University nor the names of its contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * @(#)mbuf.h 8.5 (Berkeley) 2/19/95 31 * $FreeBSD: head/sys/sys/mbuf.h 289492 2015-10-18 08:08:37Z jmg $ 32 */ 33 34#ifndef _SYS_MBUF_H_ 35#define _SYS_MBUF_H_ 36 37/* XXX: These includes suck. Sorry! */ 38#include <sys/queue.h> 39#ifdef _KERNEL 40#include <sys/systm.h> 41#include <vm/uma.h> 42#ifdef WITNESS 43#include <sys/lock.h> 44#endif 45#endif 46 47/* 48 * Mbufs are of a single size, MSIZE (sys/param.h), which includes overhead. 49 * An mbuf may add a single "mbuf cluster" of size MCLBYTES (also in 50 * sys/param.h), which has no additional overhead and is used instead of the 51 * internal data area; this is done when at least MINCLSIZE of data must be 52 * stored. Additionally, it is possible to allocate a separate buffer 53 * externally and attach it to the mbuf in a way similar to that of mbuf 54 * clusters. 55 * 56 * NB: These calculation do not take actual compiler-induced alignment and 57 * padding inside the complete struct mbuf into account. Appropriate 58 * attention is required when changing members of struct mbuf. 59 * 60 * MLEN is data length in a normal mbuf. 61 * MHLEN is data length in an mbuf with pktheader. 62 * MINCLSIZE is a smallest amount of data that should be put into cluster. 63 * 64 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 65 * they are sensible. 66 */ 67struct mbuf; 68#define MHSIZE offsetof(struct mbuf, m_dat) 69#define MPKTHSIZE offsetof(struct mbuf, m_pktdat) 70#define MLEN ((int)(MSIZE - MHSIZE)) 71#define MHLEN ((int)(MSIZE - MPKTHSIZE)) 72#define MINCLSIZE (MHLEN + 1) 73 74#ifdef _KERNEL 75/*- 76 * Macro for type conversion: convert mbuf pointer to data pointer of correct 77 * type: 78 * 79 * mtod(m, t) -- Convert mbuf pointer to data pointer of correct type. 80 * mtodo(m, o) -- Same as above but with offset 'o' into data. 81 */ 82#define mtod(m, t) ((t)((m)->m_data)) 83#define mtodo(m, o) ((void *)(((m)->m_data) + (o))) 84 85/* 86 * Argument structure passed to UMA routines during mbuf and packet 87 * allocations. 88 */ 89struct mb_args { 90 int flags; /* Flags for mbuf being allocated */ 91 short type; /* Type of mbuf being allocated */ 92}; 93#endif /* _KERNEL */ 94 95/* 96 * Packet tag structure (see below for details). 97 */ 98struct m_tag { 99 SLIST_ENTRY(m_tag) m_tag_link; /* List of packet tags */ 100 u_int16_t m_tag_id; /* Tag ID */ 101 u_int16_t m_tag_len; /* Length of data */ 102 u_int32_t m_tag_cookie; /* ABI/Module ID */ 103 void (*m_tag_free)(struct m_tag *); 104}; 105 106/* 107 * Record/packet header in first mbuf of chain; valid only if M_PKTHDR is set. 108 * Size ILP32: 48 109 * LP64: 56 110 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 111 * they are correct. 112 */ 113struct pkthdr { 114 struct ifnet *rcvif; /* rcv interface */ 115 SLIST_HEAD(packet_tags, m_tag) tags; /* list of packet tags */ 116 int32_t len; /* total packet length */ 117 118 /* Layer crossing persistent information. */ 119 uint32_t flowid; /* packet's 4-tuple system */ 120 uint64_t csum_flags; /* checksum and offload features */ 121 uint16_t fibnum; /* this packet should use this fib */ 122 uint8_t cosqos; /* class/quality of service */ 123 uint8_t rsstype; /* hash type */ 124 uint8_t l2hlen; /* layer 2 header length */ 125 uint8_t l3hlen; /* layer 3 header length */ 126 uint8_t l4hlen; /* layer 4 header length */ 127 uint8_t l5hlen; /* layer 5 header length */ 128 union { 129 uint8_t eight[8]; 130 uint16_t sixteen[4]; 131 uint32_t thirtytwo[2]; 132 uint64_t sixtyfour[1]; 133 uintptr_t unintptr[1]; 134 void *ptr; 135 } PH_per; 136 137 /* Layer specific non-persistent local storage for reassembly, etc. */ 138 union { 139 uint8_t eight[8]; 140 uint16_t sixteen[4]; 141 uint32_t thirtytwo[2]; 142 uint64_t sixtyfour[1]; 143 uintptr_t unintptr[1]; 144 void *ptr; 145 } PH_loc; 146}; 147#define ether_vtag PH_per.sixteen[0] 148#define PH_vt PH_per 149#define vt_nrecs sixteen[0] 150#define tso_segsz PH_per.sixteen[1] 151#define csum_phsum PH_per.sixteen[2] 152#define csum_data PH_per.thirtytwo[1] 153 154/* 155 * Description of external storage mapped into mbuf; valid only if M_EXT is 156 * set. 157 * Size ILP32: 28 158 * LP64: 48 159 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 160 * they are correct. 161 */ 162struct m_ext { 163 volatile u_int *ext_cnt; /* pointer to ref count info */ 164 caddr_t ext_buf; /* start of buffer */ 165 uint32_t ext_size; /* size of buffer, for ext_free */ 166 uint32_t ext_type:8, /* type of external storage */ 167 ext_flags:24; /* external storage mbuf flags */ 168 void (*ext_free) /* free routine if not the usual */ 169 (struct mbuf *, void *, void *); 170 void *ext_arg1; /* optional argument pointer */ 171 void *ext_arg2; /* optional argument pointer */ 172}; 173 174/* 175 * The core of the mbuf object along with some shortcut defines for practical 176 * purposes. 177 */ 178struct mbuf { 179 /* 180 * Header present at the beginning of every mbuf. 181 * Size ILP32: 24 182 * LP64: 32 183 * Compile-time assertions in uipc_mbuf.c test these values to ensure 184 * that they are correct. 185 */ 186 union { /* next buffer in chain */ 187 struct mbuf *m_next; 188 SLIST_ENTRY(mbuf) m_slist; 189 STAILQ_ENTRY(mbuf) m_stailq; 190 }; 191 union { /* next chain in queue/record */ 192 struct mbuf *m_nextpkt; 193 SLIST_ENTRY(mbuf) m_slistpkt; 194 STAILQ_ENTRY(mbuf) m_stailqpkt; 195 }; 196 caddr_t m_data; /* location of data */ 197 int32_t m_len; /* amount of data in this mbuf */ 198 uint32_t m_type:8, /* type of data in this mbuf */ 199 m_flags:24; /* flags; see below */ 200#if !defined(__LP64__) 201 uint32_t m_pad; /* pad for 64bit alignment */ 202#endif 203 204 /* 205 * A set of optional headers (packet header, external storage header) 206 * and internal data storage. Historically, these arrays were sized 207 * to MHLEN (space left after a packet header) and MLEN (space left 208 * after only a regular mbuf header); they are now variable size in 209 * order to support future work on variable-size mbufs. 210 */ 211 union { 212 struct { 213 struct pkthdr m_pkthdr; /* M_PKTHDR set */ 214 union { 215 struct m_ext m_ext; /* M_EXT set */ 216 char m_pktdat[0]; 217 }; 218 }; 219 char m_dat[0]; /* !M_PKTHDR, !M_EXT */ 220 }; 221}; 222 223/* 224 * mbuf flags of global significance and layer crossing. 225 * Those of only protocol/layer specific significance are to be mapped 226 * to M_PROTO[1-12] and cleared at layer handoff boundaries. 227 * NB: Limited to the lower 24 bits. 228 */ 229#define M_EXT 0x00000001 /* has associated external storage */ 230#define M_PKTHDR 0x00000002 /* start of record */ 231#define M_EOR 0x00000004 /* end of record */ 232#define M_RDONLY 0x00000008 /* associated data is marked read-only */ 233#define M_BCAST 0x00000010 /* send/received as link-level broadcast */ 234#define M_MCAST 0x00000020 /* send/received as link-level multicast */ 235#define M_PROMISC 0x00000040 /* packet was not for us */ 236#define M_VLANTAG 0x00000080 /* ether_vtag is valid */ 237#define M_UNUSED_8 0x00000100 /* --available-- */ 238#define M_NOFREE 0x00000200 /* do not free mbuf, embedded in cluster */ 239 240#define M_PROTO1 0x00001000 /* protocol-specific */ 241#define M_PROTO2 0x00002000 /* protocol-specific */ 242#define M_PROTO3 0x00004000 /* protocol-specific */ 243#define M_PROTO4 0x00008000 /* protocol-specific */ 244#define M_PROTO5 0x00010000 /* protocol-specific */ 245#define M_PROTO6 0x00020000 /* protocol-specific */ 246#define M_PROTO7 0x00040000 /* protocol-specific */ 247#define M_PROTO8 0x00080000 /* protocol-specific */ 248#define M_PROTO9 0x00100000 /* protocol-specific */ 249#define M_PROTO10 0x00200000 /* protocol-specific */ 250#define M_PROTO11 0x00400000 /* protocol-specific */ 251#define M_PROTO12 0x00800000 /* protocol-specific */ 252 253/* 254 * Flags to purge when crossing layers. 255 */ 256#define M_PROTOFLAGS \ 257 (M_PROTO1|M_PROTO2|M_PROTO3|M_PROTO4|M_PROTO5|M_PROTO6|M_PROTO7|M_PROTO8|\ 258 M_PROTO9|M_PROTO10|M_PROTO11|M_PROTO12) 259 260/* 261 * Flags preserved when copying m_pkthdr. 262 */ 263#define M_COPYFLAGS \ 264 (M_PKTHDR|M_EOR|M_RDONLY|M_BCAST|M_MCAST|M_PROMISC|M_VLANTAG| \ 265 M_PROTOFLAGS) 266 267/* 268 * Mbuf flag description for use with printf(9) %b identifier. 269 */ 270#define M_FLAG_BITS \ 271 "\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_BCAST\6M_MCAST" \ 272 "\7M_PROMISC\10M_VLANTAG" 273#define M_FLAG_PROTOBITS \ 274 "\15M_PROTO1\16M_PROTO2\17M_PROTO3\20M_PROTO4\21M_PROTO5" \ 275 "\22M_PROTO6\23M_PROTO7\24M_PROTO8\25M_PROTO9\26M_PROTO10" \ 276 "\27M_PROTO11\30M_PROTO12" 277#define M_FLAG_PRINTF (M_FLAG_BITS M_FLAG_PROTOBITS) 278 279/* 280 * Network interface cards are able to hash protocol fields (such as IPv4 281 * addresses and TCP port numbers) classify packets into flows. These flows 282 * can then be used to maintain ordering while delivering packets to the OS 283 * via parallel input queues, as well as to provide a stateless affinity 284 * model. NIC drivers can pass up the hash via m->m_pkthdr.flowid, and set 285 * m_flag fields to indicate how the hash should be interpreted by the 286 * network stack. 287 * 288 * Most NICs support RSS, which provides ordering and explicit affinity, and 289 * use the hash m_flag bits to indicate what header fields were covered by 290 * the hash. M_HASHTYPE_OPAQUE can be set by non-RSS cards or configurations 291 * that provide an opaque flow identifier, allowing for ordering and 292 * distribution without explicit affinity. 293 */ 294/* Microsoft RSS standard hash types */ 295#define M_HASHTYPE_NONE 0 296#define M_HASHTYPE_RSS_IPV4 1 /* IPv4 2-tuple */ 297#define M_HASHTYPE_RSS_TCP_IPV4 2 /* TCPv4 4-tuple */ 298#define M_HASHTYPE_RSS_IPV6 3 /* IPv6 2-tuple */ 299#define M_HASHTYPE_RSS_TCP_IPV6 4 /* TCPv6 4-tuple */ 300#define M_HASHTYPE_RSS_IPV6_EX 5 /* IPv6 2-tuple + ext hdrs */ 301#define M_HASHTYPE_RSS_TCP_IPV6_EX 6 /* TCPv6 4-tiple + ext hdrs */ 302/* Non-standard RSS hash types */ 303#define M_HASHTYPE_RSS_UDP_IPV4 7 /* IPv4 UDP 4-tuple */ 304#define M_HASHTYPE_RSS_UDP_IPV4_EX 8 /* IPv4 UDP 4-tuple + ext hdrs */ 305#define M_HASHTYPE_RSS_UDP_IPV6 9 /* IPv6 UDP 4-tuple */ 306#define M_HASHTYPE_RSS_UDP_IPV6_EX 10 /* IPv6 UDP 4-tuple + ext hdrs */ 307 308#define M_HASHTYPE_OPAQUE 255 /* ordering, not affinity */ 309 310#define M_HASHTYPE_CLEAR(m) ((m)->m_pkthdr.rsstype = 0) 311#define M_HASHTYPE_GET(m) ((m)->m_pkthdr.rsstype) 312#define M_HASHTYPE_SET(m, v) ((m)->m_pkthdr.rsstype = (v)) 313#define M_HASHTYPE_TEST(m, v) (M_HASHTYPE_GET(m) == (v)) 314 315/* 316 * COS/QOS class and quality of service tags. 317 * It uses DSCP code points as base. 318 */ 319#define QOS_DSCP_CS0 0x00 320#define QOS_DSCP_DEF QOS_DSCP_CS0 321#define QOS_DSCP_CS1 0x20 322#define QOS_DSCP_AF11 0x28 323#define QOS_DSCP_AF12 0x30 324#define QOS_DSCP_AF13 0x38 325#define QOS_DSCP_CS2 0x40 326#define QOS_DSCP_AF21 0x48 327#define QOS_DSCP_AF22 0x50 328#define QOS_DSCP_AF23 0x58 329#define QOS_DSCP_CS3 0x60 330#define QOS_DSCP_AF31 0x68 331#define QOS_DSCP_AF32 0x70 332#define QOS_DSCP_AF33 0x78 333#define QOS_DSCP_CS4 0x80 334#define QOS_DSCP_AF41 0x88 335#define QOS_DSCP_AF42 0x90 336#define QOS_DSCP_AF43 0x98 337#define QOS_DSCP_CS5 0xa0 338#define QOS_DSCP_EF 0xb8 339#define QOS_DSCP_CS6 0xc0 340#define QOS_DSCP_CS7 0xe0 341 342/* 343 * External mbuf storage buffer types. 344 */ 345#define EXT_CLUSTER 1 /* mbuf cluster */ 346#define EXT_SFBUF 2 /* sendfile(2)'s sf_bufs */ 347#define EXT_JUMBOP 3 /* jumbo cluster page sized */ 348#define EXT_JUMBO9 4 /* jumbo cluster 9216 bytes */ 349#define EXT_JUMBO16 5 /* jumbo cluster 16184 bytes */ 350#define EXT_PACKET 6 /* mbuf+cluster from packet zone */ 351#define EXT_MBUF 7 /* external mbuf reference (M_IOVEC) */ 352 353#define EXT_VENDOR1 224 /* for vendor-internal use */ 354#define EXT_VENDOR2 225 /* for vendor-internal use */ 355#define EXT_VENDOR3 226 /* for vendor-internal use */ 356#define EXT_VENDOR4 227 /* for vendor-internal use */ 357 358#define EXT_EXP1 244 /* for experimental use */ 359#define EXT_EXP2 245 /* for experimental use */ 360#define EXT_EXP3 246 /* for experimental use */ 361#define EXT_EXP4 247 /* for experimental use */ 362 363#define EXT_NET_DRV 252 /* custom ext_buf provided by net driver(s) */ 364#define EXT_MOD_TYPE 253 /* custom module's ext_buf type */ 365#define EXT_DISPOSABLE 254 /* can throw this buffer away w/page flipping */ 366#define EXT_EXTREF 255 /* has externally maintained ext_cnt ptr */ 367 368/* 369 * Flags for external mbuf buffer types. 370 * NB: limited to the lower 24 bits. 371 */ 372#define EXT_FLAG_EMBREF 0x000001 /* embedded ext_cnt, notyet */ 373#define EXT_FLAG_EXTREF 0x000002 /* external ext_cnt, notyet */ 374#define EXT_FLAG_NOFREE 0x000010 /* don't free mbuf to pool, notyet */ 375 376#define EXT_FLAG_VENDOR1 0x010000 /* for vendor-internal use */ 377#define EXT_FLAG_VENDOR2 0x020000 /* for vendor-internal use */ 378#define EXT_FLAG_VENDOR3 0x040000 /* for vendor-internal use */ 379#define EXT_FLAG_VENDOR4 0x080000 /* for vendor-internal use */ 380 381#define EXT_FLAG_EXP1 0x100000 /* for experimental use */ 382#define EXT_FLAG_EXP2 0x200000 /* for experimental use */ 383#define EXT_FLAG_EXP3 0x400000 /* for experimental use */ 384#define EXT_FLAG_EXP4 0x800000 /* for experimental use */ 385 386/* 387 * EXT flag description for use with printf(9) %b identifier. 388 */ 389#define EXT_FLAG_BITS \ 390 "\20\1EXT_FLAG_EMBREF\2EXT_FLAG_EXTREF\5EXT_FLAG_NOFREE" \ 391 "\21EXT_FLAG_VENDOR1\22EXT_FLAG_VENDOR2\23EXT_FLAG_VENDOR3" \ 392 "\24EXT_FLAG_VENDOR4\25EXT_FLAG_EXP1\26EXT_FLAG_EXP2\27EXT_FLAG_EXP3" \ 393 "\30EXT_FLAG_EXP4" 394 395/* 396 * External reference/free functions. 397 */ 398void sf_ext_ref(void *, void *); 399void sf_ext_free(void *, void *); 400 401/* 402 * Flags indicating checksum, segmentation and other offload work to be 403 * done, or already done, by hardware or lower layers. It is split into 404 * separate inbound and outbound flags. 405 * 406 * Outbound flags that are set by upper protocol layers requesting lower 407 * layers, or ideally the hardware, to perform these offloading tasks. 408 * For outbound packets this field and its flags can be directly tested 409 * against ifnet if_hwassist. 410 */ 411#define CSUM_IP 0x00000001 /* IP header checksum offload */ 412#define CSUM_IP_UDP 0x00000002 /* UDP checksum offload */ 413#define CSUM_IP_TCP 0x00000004 /* TCP checksum offload */ 414#define CSUM_IP_SCTP 0x00000008 /* SCTP checksum offload */ 415#define CSUM_IP_TSO 0x00000010 /* TCP segmentation offload */ 416#define CSUM_IP_ISCSI 0x00000020 /* iSCSI checksum offload */ 417 418#define CSUM_IP6_UDP 0x00000200 /* UDP checksum offload */ 419#define CSUM_IP6_TCP 0x00000400 /* TCP checksum offload */ 420#define CSUM_IP6_SCTP 0x00000800 /* SCTP checksum offload */ 421#define CSUM_IP6_TSO 0x00001000 /* TCP segmentation offload */ 422#define CSUM_IP6_ISCSI 0x00002000 /* iSCSI checksum offload */ 423 424/* Inbound checksum support where the checksum was verified by hardware. */ 425#define CSUM_L3_CALC 0x01000000 /* calculated layer 3 csum */ 426#define CSUM_L3_VALID 0x02000000 /* checksum is correct */ 427#define CSUM_L4_CALC 0x04000000 /* calculated layer 4 csum */ 428#define CSUM_L4_VALID 0x08000000 /* checksum is correct */ 429#define CSUM_L5_CALC 0x10000000 /* calculated layer 5 csum */ 430#define CSUM_L5_VALID 0x20000000 /* checksum is correct */ 431#define CSUM_COALESED 0x40000000 /* contains merged segments */ 432 433/* 434 * CSUM flag description for use with printf(9) %b identifier. 435 */ 436#define CSUM_BITS \ 437 "\20\1CSUM_IP\2CSUM_IP_UDP\3CSUM_IP_TCP\4CSUM_IP_SCTP\5CSUM_IP_TSO" \ 438 "\6CSUM_IP_ISCSI" \ 439 "\12CSUM_IP6_UDP\13CSUM_IP6_TCP\14CSUM_IP6_SCTP\15CSUM_IP6_TSO" \ 440 "\16CSUM_IP6_ISCSI" \ 441 "\31CSUM_L3_CALC\32CSUM_L3_VALID\33CSUM_L4_CALC\34CSUM_L4_VALID" \ 442 "\35CSUM_L5_CALC\36CSUM_L5_VALID\37CSUM_COALESED" 443 444/* CSUM flags compatibility mappings. */ 445#define CSUM_IP_CHECKED CSUM_L3_CALC 446#define CSUM_IP_VALID CSUM_L3_VALID 447#define CSUM_DATA_VALID CSUM_L4_VALID 448#define CSUM_PSEUDO_HDR CSUM_L4_CALC 449#define CSUM_SCTP_VALID CSUM_L4_VALID 450#define CSUM_DELAY_DATA (CSUM_TCP|CSUM_UDP) 451#define CSUM_DELAY_IP CSUM_IP /* Only v4, no v6 IP hdr csum */ 452#define CSUM_DELAY_DATA_IPV6 (CSUM_TCP_IPV6|CSUM_UDP_IPV6) 453#define CSUM_DATA_VALID_IPV6 CSUM_DATA_VALID 454#define CSUM_TCP CSUM_IP_TCP 455#define CSUM_UDP CSUM_IP_UDP 456#define CSUM_SCTP CSUM_IP_SCTP 457#define CSUM_TSO (CSUM_IP_TSO|CSUM_IP6_TSO) 458#define CSUM_UDP_IPV6 CSUM_IP6_UDP 459#define CSUM_TCP_IPV6 CSUM_IP6_TCP 460#define CSUM_SCTP_IPV6 CSUM_IP6_SCTP 461 462/* 463 * mbuf types describing the content of the mbuf (including external storage). 464 */ 465#define MT_NOTMBUF 0 /* USED INTERNALLY ONLY! Object is not mbuf */ 466#define MT_DATA 1 /* dynamic (data) allocation */ 467#define MT_HEADER MT_DATA /* packet header, use M_PKTHDR instead */ 468 469#define MT_VENDOR1 4 /* for vendor-internal use */ 470#define MT_VENDOR2 5 /* for vendor-internal use */ 471#define MT_VENDOR3 6 /* for vendor-internal use */ 472#define MT_VENDOR4 7 /* for vendor-internal use */ 473 474#define MT_SONAME 8 /* socket name */ 475 476#define MT_EXP1 9 /* for experimental use */ 477#define MT_EXP2 10 /* for experimental use */ 478#define MT_EXP3 11 /* for experimental use */ 479#define MT_EXP4 12 /* for experimental use */ 480 481#define MT_CONTROL 14 /* extra-data protocol message */ 482#define MT_OOBDATA 15 /* expedited data */ 483#define MT_NTYPES 16 /* number of mbuf types for mbtypes[] */ 484 485#define MT_NOINIT 255 /* Not a type but a flag to allocate 486 a non-initialized mbuf */ 487 488/* 489 * String names of mbuf-related UMA(9) and malloc(9) types. Exposed to 490 * !_KERNEL so that monitoring tools can look up the zones with 491 * libmemstat(3). 492 */ 493#define MBUF_MEM_NAME "mbuf" 494#define MBUF_CLUSTER_MEM_NAME "mbuf_cluster" 495#define MBUF_PACKET_MEM_NAME "mbuf_packet" 496#define MBUF_JUMBOP_MEM_NAME "mbuf_jumbo_page" 497#define MBUF_JUMBO9_MEM_NAME "mbuf_jumbo_9k" 498#define MBUF_JUMBO16_MEM_NAME "mbuf_jumbo_16k" 499#define MBUF_TAG_MEM_NAME "mbuf_tag" 500#define MBUF_EXTREFCNT_MEM_NAME "mbuf_ext_refcnt" 501 502#ifdef _KERNEL 503 504#ifdef WITNESS 505#define MBUF_CHECKSLEEP(how) do { \ 506 if (how == M_WAITOK) \ 507 WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL, \ 508 "Sleeping in \"%s\"", __func__); \ 509} while (0) 510#else 511#define MBUF_CHECKSLEEP(how) 512#endif 513 514/* 515 * Network buffer allocation API 516 * 517 * The rest of it is defined in kern/kern_mbuf.c 518 */ 519extern uma_zone_t zone_mbuf; 520extern uma_zone_t zone_clust; 521extern uma_zone_t zone_pack; 522extern uma_zone_t zone_jumbop; 523extern uma_zone_t zone_jumbo9; 524extern uma_zone_t zone_jumbo16; 525extern uma_zone_t zone_ext_refcnt; 526 527void mb_dupcl(struct mbuf *, const struct mbuf *); 528void mb_free_ext(struct mbuf *); 529int m_pkthdr_init(struct mbuf *, int); 530 531static __inline int 532m_gettype(int size) 533{ 534 int type; 535 536 switch (size) { 537 case MSIZE: 538 type = EXT_MBUF; 539 break; 540 case MCLBYTES: 541 type = EXT_CLUSTER; 542 break; 543#if MJUMPAGESIZE != MCLBYTES 544 case MJUMPAGESIZE: 545 type = EXT_JUMBOP; 546 break; 547#endif 548 case MJUM9BYTES: 549 type = EXT_JUMBO9; 550 break; 551 case MJUM16BYTES: 552 type = EXT_JUMBO16; 553 break; 554 default: 555 panic("%s: invalid cluster size %d", __func__, size); 556 } 557 558 return (type); 559} 560 561/* 562 * Associated an external reference counted buffer with an mbuf. 563 */ 564static __inline void 565m_extaddref(struct mbuf *m, caddr_t buf, u_int size, u_int *ref_cnt, 566 void (*freef)(struct mbuf *, void *, void *), void *arg1, void *arg2) 567{ 568 569 KASSERT(ref_cnt != NULL, ("%s: ref_cnt not provided", __func__)); 570 571 atomic_add_int(ref_cnt, 1); 572 m->m_flags |= M_EXT; 573 m->m_ext.ext_buf = buf; 574 m->m_ext.ext_cnt = ref_cnt; 575 m->m_data = m->m_ext.ext_buf; 576 m->m_ext.ext_size = size; 577 m->m_ext.ext_free = freef; 578 m->m_ext.ext_arg1 = arg1; 579 m->m_ext.ext_arg2 = arg2; 580 m->m_ext.ext_type = EXT_EXTREF; 581 m->m_ext.ext_flags = 0; 582} 583 584static __inline uma_zone_t 585m_getzone(int size) 586{ 587 uma_zone_t zone; 588 589 switch (size) { 590 case MCLBYTES: 591 zone = zone_clust; 592 break; 593#if MJUMPAGESIZE != MCLBYTES 594 case MJUMPAGESIZE: 595 zone = zone_jumbop; 596 break; 597#endif 598 case MJUM9BYTES: 599 zone = zone_jumbo9; 600 break; 601 case MJUM16BYTES: 602 zone = zone_jumbo16; 603 break; 604 default: 605 panic("%s: invalid cluster size %d", __func__, size); 606 } 607 608 return (zone); 609} 610 611/* 612 * Initialize an mbuf with linear storage. 613 * 614 * Inline because the consumer text overhead will be roughly the same to 615 * initialize or call a function with this many parameters and M_PKTHDR 616 * should go away with constant propagation for !MGETHDR. 617 */ 618static __inline int 619m_init(struct mbuf *m, uma_zone_t zone __unused, int size __unused, int how, 620 short type, int flags) 621{ 622 int error; 623 624 m->m_next = NULL; 625 m->m_nextpkt = NULL; 626 m->m_data = m->m_dat; 627 m->m_len = 0; 628 m->m_flags = flags; 629 m->m_type = type; 630 if (flags & M_PKTHDR) { 631 if ((error = m_pkthdr_init(m, how)) != 0) 632 return (error); 633 } 634 635 return (0); 636} 637 638static __inline struct mbuf * 639m_get(int how, short type) 640{ 641 struct mb_args args; 642 643 args.flags = 0; 644 args.type = type; 645 return (uma_zalloc_arg(zone_mbuf, &args, how)); 646} 647 648/* 649 * XXX This should be deprecated, very little use. 650 */ 651static __inline struct mbuf * 652m_getclr(int how, short type) 653{ 654 struct mbuf *m; 655 struct mb_args args; 656 657 args.flags = 0; 658 args.type = type; 659 m = uma_zalloc_arg(zone_mbuf, &args, how); 660 if (m != NULL) 661 bzero(m->m_data, MLEN); 662 return (m); 663} 664 665static __inline struct mbuf * 666m_gethdr(int how, short type) 667{ 668 struct mb_args args; 669 670 args.flags = M_PKTHDR; 671 args.type = type; 672 return (uma_zalloc_arg(zone_mbuf, &args, how)); 673} 674 675static __inline struct mbuf * 676m_getcl(int how, short type, int flags) 677{ 678 struct mb_args args; 679 680 args.flags = flags; 681 args.type = type; 682 return (uma_zalloc_arg(zone_pack, &args, how)); 683} 684 685static __inline int 686m_clget(struct mbuf *m, int how) 687{ 688 689 KASSERT((m->m_flags & M_EXT) == 0, ("%s: mbuf %p has M_EXT", 690 __func__, m)); 691 m->m_ext.ext_buf = (char *)NULL; 692 uma_zalloc_arg(zone_clust, m, how); 693 /* 694 * On a cluster allocation failure, drain the packet zone and retry, 695 * we might be able to loosen a few clusters up on the drain. 696 */ 697 if ((how & M_NOWAIT) && (m->m_ext.ext_buf == NULL)) { 698 zone_drain(zone_pack); 699 uma_zalloc_arg(zone_clust, m, how); 700 } 701 return (m->m_flags & M_EXT); 702} 703 704/* 705 * m_cljget() is different from m_clget() as it can allocate clusters without 706 * attaching them to an mbuf. In that case the return value is the pointer 707 * to the cluster of the requested size. If an mbuf was specified, it gets 708 * the cluster attached to it and the return value can be safely ignored. 709 * For size it takes MCLBYTES, MJUMPAGESIZE, MJUM9BYTES, MJUM16BYTES. 710 */ 711static __inline void * 712m_cljget(struct mbuf *m, int how, int size) 713{ 714 uma_zone_t zone; 715 716 if (m != NULL) { 717 KASSERT((m->m_flags & M_EXT) == 0, ("%s: mbuf %p has M_EXT", 718 __func__, m)); 719 m->m_ext.ext_buf = NULL; 720 } 721 722 zone = m_getzone(size); 723 return (uma_zalloc_arg(zone, m, how)); 724} 725 726static __inline void 727m_cljset(struct mbuf *m, void *cl, int type) 728{ 729 uma_zone_t zone; 730 int size; 731 732 switch (type) { 733 case EXT_CLUSTER: 734 size = MCLBYTES; 735 zone = zone_clust; 736 break; 737#if MJUMPAGESIZE != MCLBYTES 738 case EXT_JUMBOP: 739 size = MJUMPAGESIZE; 740 zone = zone_jumbop; 741 break; 742#endif 743 case EXT_JUMBO9: 744 size = MJUM9BYTES; 745 zone = zone_jumbo9; 746 break; 747 case EXT_JUMBO16: 748 size = MJUM16BYTES; 749 zone = zone_jumbo16; 750 break; 751 default: 752 panic("%s: unknown cluster type %d", __func__, type); 753 break; 754 } 755 756 m->m_data = m->m_ext.ext_buf = cl; 757 m->m_ext.ext_free = m->m_ext.ext_arg1 = m->m_ext.ext_arg2 = NULL; 758 m->m_ext.ext_size = size; 759 m->m_ext.ext_type = type; 760 m->m_ext.ext_flags = 0; 761 m->m_ext.ext_cnt = uma_find_refcnt(zone, cl); 762 m->m_flags |= M_EXT; 763 764} 765 766static __inline void 767m_chtype(struct mbuf *m, short new_type) 768{ 769 770 m->m_type = new_type; 771} 772 773static __inline void 774m_clrprotoflags(struct mbuf *m) 775{ 776 777 while (m) { 778 m->m_flags &= ~M_PROTOFLAGS; 779 m = m->m_next; 780 } 781} 782 783static __inline struct mbuf * 784m_last(struct mbuf *m) 785{ 786 787 while (m->m_next) 788 m = m->m_next; 789 return (m); 790} 791 792/* 793 * mbuf, cluster, and external object allocation macros (for compatibility 794 * purposes). 795 */ 796#define M_MOVE_PKTHDR(to, from) m_move_pkthdr((to), (from)) 797#define MGET(m, how, type) ((m) = m_get((how), (type))) 798#define MGETHDR(m, how, type) ((m) = m_gethdr((how), (type))) 799#define MCLGET(m, how) m_clget((m), (how)) 800#define MEXTADD(m, buf, size, free, arg1, arg2, flags, type) \ 801 (void )m_extadd((m), (caddr_t)(buf), (size), (free), (arg1), (arg2),\ 802 (flags), (type), M_NOWAIT) 803#define m_getm(m, len, how, type) \ 804 m_getm2((m), (len), (how), (type), M_PKTHDR) 805 806/* 807 * Evaluate TRUE if it's safe to write to the mbuf m's data region (this can 808 * be both the local data payload, or an external buffer area, depending on 809 * whether M_EXT is set). 810 */ 811#define M_WRITABLE(m) (!((m)->m_flags & M_RDONLY) && \ 812 (!(((m)->m_flags & M_EXT)) || \ 813 (*((m)->m_ext.ext_cnt) == 1)) ) \ 814 815/* Check if the supplied mbuf has a packet header, or else panic. */ 816#define M_ASSERTPKTHDR(m) \ 817 KASSERT((m) != NULL && (m)->m_flags & M_PKTHDR, \ 818 ("%s: no mbuf packet header!", __func__)) 819 820/* 821 * Ensure that the supplied mbuf is a valid, non-free mbuf. 822 * 823 * XXX: Broken at the moment. Need some UMA magic to make it work again. 824 */ 825#define M_ASSERTVALID(m) \ 826 KASSERT((((struct mbuf *)m)->m_flags & 0) == 0, \ 827 ("%s: attempted use of a free mbuf!", __func__)) 828 829/* 830 * Return the address of the start of the buffer associated with an mbuf, 831 * handling external storage, packet-header mbufs, and regular data mbufs. 832 */ 833#define M_START(m) \ 834 (((m)->m_flags & M_EXT) ? (m)->m_ext.ext_buf : \ 835 ((m)->m_flags & M_PKTHDR) ? &(m)->m_pktdat[0] : \ 836 &(m)->m_dat[0]) 837 838/* 839 * Return the size of the buffer associated with an mbuf, handling external 840 * storage, packet-header mbufs, and regular data mbufs. 841 */ 842#define M_SIZE(m) \ 843 (((m)->m_flags & M_EXT) ? (m)->m_ext.ext_size : \ 844 ((m)->m_flags & M_PKTHDR) ? MHLEN : \ 845 MLEN) 846 847/* 848 * Set the m_data pointer of a newly allocated mbuf to place an object of the 849 * specified size at the end of the mbuf, longword aligned. 850 * 851 * NB: Historically, we had M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() as 852 * separate macros, each asserting that it was called at the proper moment. 853 * This required callers to themselves test the storage type and call the 854 * right one. Rather than require callers to be aware of those layout 855 * decisions, we centralize here. 856 */ 857static __inline void 858m_align(struct mbuf *m, int len) 859{ 860#ifdef INVARIANTS 861 const char *msg = "%s: not a virgin mbuf"; 862#endif 863 int adjust; 864 865 KASSERT(m->m_data == M_START(m), (msg, __func__)); 866 867 adjust = M_SIZE(m) - len; 868 m->m_data += adjust &~ (sizeof(long)-1); 869} 870 871#define M_ALIGN(m, len) m_align(m, len) 872#define MH_ALIGN(m, len) m_align(m, len) 873#define MEXT_ALIGN(m, len) m_align(m, len) 874 875/* 876 * Compute the amount of space available before the current start of data in 877 * an mbuf. 878 * 879 * The M_WRITABLE() is a temporary, conservative safety measure: the burden 880 * of checking writability of the mbuf data area rests solely with the caller. 881 * 882 * NB: In previous versions, M_LEADINGSPACE() would only check M_WRITABLE() 883 * for mbufs with external storage. We now allow mbuf-embedded data to be 884 * read-only as well. 885 */ 886#define M_LEADINGSPACE(m) \ 887 (M_WRITABLE(m) ? ((m)->m_data - M_START(m)) : 0) 888 889/* 890 * Compute the amount of space available after the end of data in an mbuf. 891 * 892 * The M_WRITABLE() is a temporary, conservative safety measure: the burden 893 * of checking writability of the mbuf data area rests solely with the caller. 894 * 895 * NB: In previous versions, M_TRAILINGSPACE() would only check M_WRITABLE() 896 * for mbufs with external storage. We now allow mbuf-embedded data to be 897 * read-only as well. 898 */ 899#define M_TRAILINGSPACE(m) \ 900 (M_WRITABLE(m) ? \ 901 ((M_START(m) + M_SIZE(m)) - ((m)->m_data + (m)->m_len)) : 0) 902 903/* 904 * Arrange to prepend space of size plen to mbuf m. If a new mbuf must be 905 * allocated, how specifies whether to wait. If the allocation fails, the 906 * original mbuf chain is freed and m is set to NULL. 907 */ 908#define M_PREPEND(m, plen, how) do { \ 909 struct mbuf **_mmp = &(m); \ 910 struct mbuf *_mm = *_mmp; \ 911 int _mplen = (plen); \ 912 int __mhow = (how); \ 913 \ 914 MBUF_CHECKSLEEP(how); \ 915 if (M_LEADINGSPACE(_mm) >= _mplen) { \ 916 _mm->m_data -= _mplen; \ 917 _mm->m_len += _mplen; \ 918 } else \ 919 _mm = m_prepend(_mm, _mplen, __mhow); \ 920 if (_mm != NULL && _mm->m_flags & M_PKTHDR) \ 921 _mm->m_pkthdr.len += _mplen; \ 922 *_mmp = _mm; \ 923} while (0) 924 925/* 926 * Change mbuf to new type. This is a relatively expensive operation and 927 * should be avoided. 928 */ 929#define MCHTYPE(m, t) m_chtype((m), (t)) 930 931/* Length to m_copy to copy all. */ 932#define M_COPYALL 1000000000 933 934/* Compatibility with 4.3. */ 935#define m_copy(m, o, l) m_copym((m), (o), (l), M_NOWAIT) 936 937extern int max_datalen; /* MHLEN - max_hdr */ 938extern int max_hdr; /* Largest link + protocol header */ 939extern int max_linkhdr; /* Largest link-level header */ 940extern int max_protohdr; /* Largest protocol header */ 941extern int nmbclusters; /* Maximum number of clusters */ 942 943struct uio; 944 945void m_adj(struct mbuf *, int); 946int m_apply(struct mbuf *, int, int, 947 int (*)(void *, void *, u_int), void *); 948int m_append(struct mbuf *, int, c_caddr_t); 949void m_cat(struct mbuf *, struct mbuf *); 950void m_catpkt(struct mbuf *, struct mbuf *); 951int m_extadd(struct mbuf *, caddr_t, u_int, 952 void (*)(struct mbuf *, void *, void *), void *, void *, 953 int, int, int); 954struct mbuf *m_collapse(struct mbuf *, int, int); 955void m_copyback(struct mbuf *, int, int, c_caddr_t); 956void m_copydata(const struct mbuf *, int, int, caddr_t); 957struct mbuf *m_copym(const struct mbuf *, int, int, int); 958struct mbuf *m_copypacket(struct mbuf *, int); 959void m_copy_pkthdr(struct mbuf *, struct mbuf *); 960struct mbuf *m_copyup(struct mbuf *, int, int); 961struct mbuf *m_defrag(struct mbuf *, int); 962void m_demote_pkthdr(struct mbuf *); 963void m_demote(struct mbuf *, int, int); 964struct mbuf *m_devget(char *, int, int, struct ifnet *, 965 void (*)(char *, caddr_t, u_int)); 966struct mbuf *m_dup(const struct mbuf *, int); 967int m_dup_pkthdr(struct mbuf *, const struct mbuf *, int); 968u_int m_fixhdr(struct mbuf *); 969struct mbuf *m_fragment(struct mbuf *, int, int); 970void m_freem(struct mbuf *); 971struct mbuf *m_get2(int, int, short, int); 972struct mbuf *m_getjcl(int, short, int, int); 973struct mbuf *m_getm2(struct mbuf *, int, int, short, int); 974struct mbuf *m_getptr(struct mbuf *, int, int *); 975u_int m_length(struct mbuf *, struct mbuf **); 976int m_mbuftouio(struct uio *, struct mbuf *, int); 977void m_move_pkthdr(struct mbuf *, struct mbuf *); 978struct mbuf *m_prepend(struct mbuf *, int, int); 979void m_print(const struct mbuf *, int); 980struct mbuf *m_pulldown(struct mbuf *, int, int, int *); 981struct mbuf *m_pullup(struct mbuf *, int); 982int m_sanity(struct mbuf *, int); 983struct mbuf *m_split(struct mbuf *, int, int); 984struct mbuf *m_uiotombuf(struct uio *, int, int, int, int); 985struct mbuf *m_unshare(struct mbuf *, int); 986 987/*- 988 * Network packets may have annotations attached by affixing a list of 989 * "packet tags" to the pkthdr structure. Packet tags are dynamically 990 * allocated semi-opaque data structures that have a fixed header 991 * (struct m_tag) that specifies the size of the memory block and a 992 * <cookie,type> pair that identifies it. The cookie is a 32-bit unique 993 * unsigned value used to identify a module or ABI. By convention this value 994 * is chosen as the date+time that the module is created, expressed as the 995 * number of seconds since the epoch (e.g., using date -u +'%s'). The type 996 * value is an ABI/module-specific value that identifies a particular 997 * annotation and is private to the module. For compatibility with systems 998 * like OpenBSD that define packet tags w/o an ABI/module cookie, the value 999 * PACKET_ABI_COMPAT is used to implement m_tag_get and m_tag_find 1000 * compatibility shim functions and several tag types are defined below. 1001 * Users that do not require compatibility should use a private cookie value 1002 * so that packet tag-related definitions can be maintained privately. 1003 * 1004 * Note that the packet tag returned by m_tag_alloc has the default memory 1005 * alignment implemented by malloc. To reference private data one can use a 1006 * construct like: 1007 * 1008 * struct m_tag *mtag = m_tag_alloc(...); 1009 * struct foo *p = (struct foo *)(mtag+1); 1010 * 1011 * if the alignment of struct m_tag is sufficient for referencing members of 1012 * struct foo. Otherwise it is necessary to embed struct m_tag within the 1013 * private data structure to insure proper alignment; e.g., 1014 * 1015 * struct foo { 1016 * struct m_tag tag; 1017 * ... 1018 * }; 1019 * struct foo *p = (struct foo *) m_tag_alloc(...); 1020 * struct m_tag *mtag = &p->tag; 1021 */ 1022 1023/* 1024 * Persistent tags stay with an mbuf until the mbuf is reclaimed. Otherwise 1025 * tags are expected to ``vanish'' when they pass through a network 1026 * interface. For most interfaces this happens normally as the tags are 1027 * reclaimed when the mbuf is free'd. However in some special cases 1028 * reclaiming must be done manually. An example is packets that pass through 1029 * the loopback interface. Also, one must be careful to do this when 1030 * ``turning around'' packets (e.g., icmp_reflect). 1031 * 1032 * To mark a tag persistent bit-or this flag in when defining the tag id. 1033 * The tag will then be treated as described above. 1034 */ 1035#define MTAG_PERSISTENT 0x800 1036 1037#define PACKET_TAG_NONE 0 /* Nadda */ 1038 1039/* Packet tags for use with PACKET_ABI_COMPAT. */ 1040#define PACKET_TAG_IPSEC_IN_DONE 1 /* IPsec applied, in */ 1041#define PACKET_TAG_IPSEC_OUT_DONE 2 /* IPsec applied, out */ 1042#define PACKET_TAG_IPSEC_IN_CRYPTO_DONE 3 /* NIC IPsec crypto done */ 1043#define PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED 4 /* NIC IPsec crypto req'ed */ 1044#define PACKET_TAG_IPSEC_IN_COULD_DO_CRYPTO 5 /* NIC notifies IPsec */ 1045#define PACKET_TAG_IPSEC_PENDING_TDB 6 /* Reminder to do IPsec */ 1046#define PACKET_TAG_BRIDGE 7 /* Bridge processing done */ 1047#define PACKET_TAG_GIF 8 /* GIF processing done */ 1048#define PACKET_TAG_GRE 9 /* GRE processing done */ 1049#define PACKET_TAG_IN_PACKET_CHECKSUM 10 /* NIC checksumming done */ 1050#define PACKET_TAG_ENCAP 11 /* Encap. processing */ 1051#define PACKET_TAG_IPSEC_SOCKET 12 /* IPSEC socket ref */ 1052#define PACKET_TAG_IPSEC_HISTORY 13 /* IPSEC history */ 1053#define PACKET_TAG_IPV6_INPUT 14 /* IPV6 input processing */ 1054#define PACKET_TAG_DUMMYNET 15 /* dummynet info */ 1055#define PACKET_TAG_DIVERT 17 /* divert info */ 1056#define PACKET_TAG_IPFORWARD 18 /* ipforward info */ 1057#define PACKET_TAG_MACLABEL (19 | MTAG_PERSISTENT) /* MAC label */ 1058#define PACKET_TAG_PF (21 | MTAG_PERSISTENT) /* PF/ALTQ information */ 1059#define PACKET_TAG_RTSOCKFAM 25 /* rtsock sa family */ 1060#define PACKET_TAG_IPOPTIONS 27 /* Saved IP options */ 1061#define PACKET_TAG_CARP 28 /* CARP info */ 1062#define PACKET_TAG_IPSEC_NAT_T_PORTS 29 /* two uint16_t */ 1063#define PACKET_TAG_ND_OUTGOING 30 /* ND outgoing */ 1064 1065/* Specific cookies and tags. */ 1066 1067/* Packet tag routines. */ 1068struct m_tag *m_tag_alloc(u_int32_t, int, int, int); 1069void m_tag_delete(struct mbuf *, struct m_tag *); 1070void m_tag_delete_chain(struct mbuf *, struct m_tag *); 1071void m_tag_free_default(struct m_tag *); 1072struct m_tag *m_tag_locate(struct mbuf *, u_int32_t, int, struct m_tag *); 1073struct m_tag *m_tag_copy(struct m_tag *, int); 1074int m_tag_copy_chain(struct mbuf *, const struct mbuf *, int); 1075void m_tag_delete_nonpersistent(struct mbuf *); 1076 1077/* 1078 * Initialize the list of tags associated with an mbuf. 1079 */ 1080static __inline void 1081m_tag_init(struct mbuf *m) 1082{ 1083 1084 SLIST_INIT(&m->m_pkthdr.tags); 1085} 1086 1087/* 1088 * Set up the contents of a tag. Note that this does not fill in the free 1089 * method; the caller is expected to do that. 1090 * 1091 * XXX probably should be called m_tag_init, but that was already taken. 1092 */ 1093static __inline void 1094m_tag_setup(struct m_tag *t, u_int32_t cookie, int type, int len) 1095{ 1096 1097 t->m_tag_id = type; 1098 t->m_tag_len = len; 1099 t->m_tag_cookie = cookie; 1100} 1101 1102/* 1103 * Reclaim resources associated with a tag. 1104 */ 1105static __inline void 1106m_tag_free(struct m_tag *t) 1107{ 1108 1109 (*t->m_tag_free)(t); 1110} 1111 1112/* 1113 * Return the first tag associated with an mbuf. 1114 */ 1115static __inline struct m_tag * 1116m_tag_first(struct mbuf *m) 1117{ 1118 1119 return (SLIST_FIRST(&m->m_pkthdr.tags)); 1120} 1121 1122/* 1123 * Return the next tag in the list of tags associated with an mbuf. 1124 */ 1125static __inline struct m_tag * 1126m_tag_next(struct mbuf *m __unused, struct m_tag *t) 1127{ 1128 1129 return (SLIST_NEXT(t, m_tag_link)); 1130} 1131 1132/* 1133 * Prepend a tag to the list of tags associated with an mbuf. 1134 */ 1135static __inline void 1136m_tag_prepend(struct mbuf *m, struct m_tag *t) 1137{ 1138 1139 SLIST_INSERT_HEAD(&m->m_pkthdr.tags, t, m_tag_link); 1140} 1141 1142/* 1143 * Unlink a tag from the list of tags associated with an mbuf. 1144 */ 1145static __inline void 1146m_tag_unlink(struct mbuf *m, struct m_tag *t) 1147{ 1148 1149 SLIST_REMOVE(&m->m_pkthdr.tags, t, m_tag, m_tag_link); 1150} 1151 1152/* These are for OpenBSD compatibility. */ 1153#define MTAG_ABI_COMPAT 0 /* compatibility ABI */ 1154 1155static __inline struct m_tag * 1156m_tag_get(int type, int length, int wait) 1157{ 1158 return (m_tag_alloc(MTAG_ABI_COMPAT, type, length, wait)); 1159} 1160 1161static __inline struct m_tag * 1162m_tag_find(struct mbuf *m, int type, struct m_tag *start) 1163{ 1164 return (SLIST_EMPTY(&m->m_pkthdr.tags) ? (struct m_tag *)NULL : 1165 m_tag_locate(m, MTAG_ABI_COMPAT, type, start)); 1166} 1167 1168static __inline struct mbuf * 1169m_free(struct mbuf *m) 1170{ 1171 struct mbuf *n = m->m_next; 1172 1173 if ((m->m_flags & (M_PKTHDR|M_NOFREE)) == (M_PKTHDR|M_NOFREE)) 1174 m_tag_delete_chain(m, NULL); 1175 if (m->m_flags & M_EXT) 1176 mb_free_ext(m); 1177 else if ((m->m_flags & M_NOFREE) == 0) 1178 uma_zfree(zone_mbuf, m); 1179 return (n); 1180} 1181 1182static __inline int 1183rt_m_getfib(struct mbuf *m) 1184{ 1185 KASSERT(m->m_flags & M_PKTHDR , ("Attempt to get FIB from non header mbuf.")); 1186 return (m->m_pkthdr.fibnum); 1187} 1188 1189#define M_GETFIB(_m) rt_m_getfib(_m) 1190 1191#define M_SETFIB(_m, _fib) do { \ 1192 KASSERT((_m)->m_flags & M_PKTHDR, ("Attempt to set FIB on non header mbuf.")); \ 1193 ((_m)->m_pkthdr.fibnum) = (_fib); \ 1194} while (0) 1195 1196/* flags passed as first argument for "m_ether_tcpip_hash()" */ 1197#define MBUF_HASHFLAG_L2 (1 << 2) 1198#define MBUF_HASHFLAG_L3 (1 << 3) 1199#define MBUF_HASHFLAG_L4 (1 << 4) 1200 1201/* mbuf hashing helper routines */ 1202uint32_t m_ether_tcpip_hash_init(void); 1203uint32_t m_ether_tcpip_hash(const uint32_t, const struct mbuf *, const uint32_t); 1204 1205#ifdef MBUF_PROFILING 1206 void m_profile(struct mbuf *m); 1207 #define M_PROFILE(m) m_profile(m) 1208#else 1209 #define M_PROFILE(m) 1210#endif 1211 1212struct mbufq { 1213 STAILQ_HEAD(, mbuf) mq_head; 1214 int mq_len; 1215 int mq_maxlen; 1216}; 1217 1218static inline void 1219mbufq_init(struct mbufq *mq, int maxlen) 1220{ 1221 1222 STAILQ_INIT(&mq->mq_head); 1223 mq->mq_maxlen = maxlen; 1224 mq->mq_len = 0; 1225} 1226 1227static inline struct mbuf * 1228mbufq_flush(struct mbufq *mq) 1229{ 1230 struct mbuf *m; 1231 1232 m = STAILQ_FIRST(&mq->mq_head); 1233 STAILQ_INIT(&mq->mq_head); 1234 mq->mq_len = 0; 1235 return (m); 1236} 1237 1238static inline void 1239mbufq_drain(struct mbufq *mq) 1240{ 1241 struct mbuf *m, *n; 1242 1243 n = mbufq_flush(mq); 1244 while ((m = n) != NULL) { 1245 n = STAILQ_NEXT(m, m_stailqpkt); 1246 m_freem(m); 1247 } 1248} 1249 1250static inline struct mbuf * 1251mbufq_first(const struct mbufq *mq) 1252{ 1253 1254 return (STAILQ_FIRST(&mq->mq_head)); 1255} 1256 1257static inline struct mbuf * 1258mbufq_last(const struct mbufq *mq) 1259{ 1260 1261 return (STAILQ_LAST(&mq->mq_head, mbuf, m_stailqpkt)); 1262} 1263 1264static inline int 1265mbufq_full(const struct mbufq *mq) 1266{ 1267 1268 return (mq->mq_len >= mq->mq_maxlen); 1269} 1270 1271static inline int 1272mbufq_len(const struct mbufq *mq) 1273{ 1274 1275 return (mq->mq_len); 1276} 1277 1278static inline int 1279mbufq_enqueue(struct mbufq *mq, struct mbuf *m) 1280{ 1281 1282 if (mbufq_full(mq)) 1283 return (ENOBUFS); 1284 STAILQ_INSERT_TAIL(&mq->mq_head, m, m_stailqpkt); 1285 mq->mq_len++; 1286 return (0); 1287} 1288 1289static inline struct mbuf * 1290mbufq_dequeue(struct mbufq *mq) 1291{ 1292 struct mbuf *m; 1293 1294 m = STAILQ_FIRST(&mq->mq_head); 1295 if (m) { 1296 STAILQ_REMOVE_HEAD(&mq->mq_head, m_stailqpkt); 1297 m->m_nextpkt = NULL; 1298 mq->mq_len--; 1299 } 1300 return (m); 1301} 1302 1303static inline void 1304mbufq_prepend(struct mbufq *mq, struct mbuf *m) 1305{ 1306 1307 STAILQ_INSERT_HEAD(&mq->mq_head, m, m_stailqpkt); 1308 mq->mq_len++; 1309} 1310#endif /* _KERNEL */ 1311#endif /* !_SYS_MBUF_H_ */ 1312