lbc.h revision 238045
1/*- 2 * Copyright (c) 2006-2008, Juniper Networks, Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/powerpc/mpc85xx/lbc.h 238045 2012-07-03 00:06:14Z marcel $ 27 */ 28 29#ifndef _MACHINE_LBC_H_ 30#define _MACHINE_LBC_H_ 31 32/* Maximum number of devices on Local Bus */ 33#define LBC_DEV_MAX 8 34 35/* Local access registers */ 36#define LBC85XX_BR(n) (0x0 + (8 * n)) /* Base register 0-7 */ 37#define LBC85XX_OR(n) (0x4 + (8 * n)) /* Options register 0-7 */ 38#define LBC85XX_MAR 0x068 /* UPM address register */ 39#define LBC85XX_MAMR 0x070 /* UPMA mode register */ 40#define LBC85XX_MBMR 0x074 /* UPMB mode register */ 41#define LBC85XX_MCMR 0x078 /* UPMC mode register */ 42#define LBC85XX_MRTPR 0x084 /* Memory refresh timer prescaler */ 43#define LBC85XX_MDR 0x088 /* UPM data register */ 44#define LBC85XX_LSOR 0x090 /* Special operation initiation */ 45#define LBC85XX_LURT 0x0a0 /* UPM refresh timer */ 46#define LBC85XX_LSRT 0x0a4 /* SDRAM refresh timer */ 47#define LBC85XX_LTESR 0x0b0 /* Transfer error status register */ 48#define LBC85XX_LTEDR 0x0b4 /* Transfer error disable register */ 49#define LBC85XX_LTEIR 0x0b8 /* Transfer error interrupt register */ 50#define LBC85XX_LTEATR 0x0bc /* Transfer error attributes register */ 51#define LBC85XX_LTEAR 0x0c0 /* Transfer error address register */ 52#define LBC85XX_LTECCR 0x0c4 /* Transfer error ECC register */ 53#define LBC85XX_LBCR 0x0d0 /* Configuration register */ 54#define LBC85XX_LCRR 0x0d4 /* Clock ratio register */ 55#define LBC85XX_FMR 0x0e0 /* Flash mode register */ 56#define LBC85XX_FIR 0x0e4 /* Flash instruction register */ 57#define LBC85XX_FCR 0x0e8 /* Flash command register */ 58#define LBC85XX_FBAR 0x0ec /* Flash block address register */ 59#define LBC85XX_FPAR 0x0f0 /* Flash page address register */ 60#define LBC85XX_FBCR 0x0f4 /* Flash byte count register */ 61#define LBC85XX_FECC0 0x100 /* Flash ECC block 0 register */ 62#define LBC85XX_FECC1 0x104 /* Flash ECC block 0 register */ 63#define LBC85XX_FECC2 0x108 /* Flash ECC block 0 register */ 64#define LBC85XX_FECC3 0x10c /* Flash ECC block 0 register */ 65 66/* LBC machine select */ 67#define LBCRES_MSEL_GPCM 0 68#define LBCRES_MSEL_FCM 1 69#define LBCRES_MSEL_UPMA 8 70#define LBCRES_MSEL_UPMB 9 71#define LBCRES_MSEL_UPMC 10 72 73/* LBC data error checking modes */ 74#define LBCRES_DECC_DISABLED 0 75#define LBCRES_DECC_NORMAL 1 76#define LBCRES_DECC_RMW 2 77 78/* LBC atomic operation modes */ 79#define LBCRES_ATOM_DISABLED 0 80#define LBCRES_ATOM_RAWA 1 81#define LBCRES_ATOM_WARA 2 82 83struct lbc_memrange { 84 vm_paddr_t addr; 85 vm_size_t size; 86 vm_offset_t kva; 87}; 88 89struct lbc_bank { 90 vm_paddr_t addr; /* physical addr of the bank */ 91 vm_size_t size; /* bank size */ 92 vm_offset_t kva; /* VA of the bank */ 93 94 /* 95 * XXX the following bank attributes do not have properties specified 96 * in the LBC DTS bindings yet (11.2009), so they are mainly a 97 * placeholder for future extensions. 98 */ 99 int width; /* data bus width */ 100 uint8_t msel; /* machine select */ 101 uint8_t atom; /* atomic op mode */ 102 uint8_t wp; /* write protect */ 103 uint8_t decc; /* data error checking */ 104}; 105 106struct lbc_softc { 107 device_t sc_dev; 108 109 struct resource *sc_mres; 110 bus_space_handle_t sc_bsh; 111 bus_space_tag_t sc_bst; 112 int sc_mrid; 113 114 int sc_irid; 115 struct resource *sc_ires; 116 void *sc_icookie; 117 118 struct rman sc_rman; 119 120 int sc_addr_cells; 121 int sc_size_cells; 122 123 struct lbc_memrange sc_range[LBC_DEV_MAX]; 124 struct lbc_bank sc_banks[LBC_DEV_MAX]; 125 126 uint32_t sc_ltesr; 127}; 128 129struct lbc_devinfo { 130 struct ofw_bus_devinfo di_ofw; 131 struct resource_list di_res; 132 int di_bank; 133}; 134 135uint32_t lbc_read_reg(device_t child, u_int off); 136void lbc_write_reg(device_t child, u_int off, uint32_t val); 137 138#endif /* _MACHINE_LBC_H_ */ 139