sio.c revision 111002
1/*- 2 * Copyright (c) 1991 The Regents of the University of California. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the University of 16 * California, Berkeley and its contributors. 17 * 4. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * $FreeBSD: head/sys/pc98/cbus/sio.c 111002 2003-02-16 14:13:23Z phk $ 34 * from: @(#)com.c 7.5 (Berkeley) 5/16/91 35 * from: i386/isa sio.c,v 1.234 36 */ 37 38#include "opt_comconsole.h" 39#include "opt_compat.h" 40#include "opt_ddb.h" 41#include "opt_sio.h" 42 43/* 44 * Serial driver, based on 386BSD-0.1 com driver. 45 * Mostly rewritten to use pseudo-DMA. 46 * Works for National Semiconductor NS8250-NS16550AF UARTs. 47 * COM driver, based on HP dca driver. 48 * 49 * Changes for PC-Card integration: 50 * - Added PC-Card driver table and handlers 51 */ 52/*=============================================================== 53 * 386BSD(98),FreeBSD-1.1x(98) com driver. 54 * ----- 55 * modified for PC9801 by M.Ishii 56 * Kyoto University Microcomputer Club (KMC) 57 * Chou "TEFUTEFU" Hirotomi 58 * Kyoto Univ. the faculty of medicine 59 *=============================================================== 60 * FreeBSD-2.0.1(98) sio driver. 61 * ----- 62 * modified for pc98 Internal i8251 and MICRO CORE MC16550II 63 * T.Koike(hfc01340@niftyserve.or.jp) 64 * implement kernel device configuration 65 * aizu@orient.center.nitech.ac.jp 66 * 67 * Notes. 68 * ----- 69 * PC98 localization based on 386BSD(98) com driver. Using its PC98 local 70 * functions. 71 * This driver is under debugging,has bugs. 72 * 73 * 1) config 74 * options COM_MULTIPORT #if using MC16550II 75 * device sio0 at nec? port 0x30 tty irq 4 #internal 76 * device sio1 at nec? port 0xd2 tty irq 5 flags 0x101 #mc1 77 * device sio2 at nec? port 0x8d2 tty flags 0x101 #mc2 78 * # ~~~~~iobase ~~multi port flag 79 * # ~ master device is sio1 80 * 2) device 81 * cd /dev; MAKEDEV ttyd0 ttyd1 .. 82 * 3) /etc/rc.serial 83 * 57600bps is too fast for sio0(internal8251) 84 * my ex. 85 * #set default speed 9600 86 * modem() 87 * : 88 * stty </dev/ttyid$i crtscts 9600 89 * : # ~~~~ default speed(can change after init.) 90 * modem 0 1 2 91 * 4) COMCONSOLE 92 * not changed. 93 * 5) PC9861K,PIO9032B,B98_01 94 * not tested. 95 */ 96/* 97 * modified for AIWA B98-01 98 * by T.Hatanou <hatanou@yasuda.comm.waseda.ac.jp> last update: 15 Sep.1995 99 * 100 * How to configure... 101 * # options COM_MULTIPORT # support for MICROCORE MC16550II 102 * ... comment-out this line, which will conflict with B98_01. 103 * options "B98_01" # support for AIWA B98-01 104 * device sio1 at nec? port 0x00d1 tty irq ? 105 * device sio2 at nec? port 0x00d5 tty irq ? 106 * ... you can leave these lines `irq ?', irq will be autodetected. 107 */ 108/* 109 * Modified by Y.Takahashi of Kogakuin University. 110 */ 111/* 112 * modified for 8251(FIFO) by Seigo TANIMURA <tanimura@FreeBSD.org> 113 */ 114 115#include <sys/param.h> 116#include <sys/systm.h> 117#include <sys/bus.h> 118#include <sys/conf.h> 119#include <sys/fcntl.h> 120#include <sys/interrupt.h> 121#include <sys/kernel.h> 122#include <sys/lock.h> 123#include <sys/malloc.h> 124#include <sys/module.h> 125#include <sys/mutex.h> 126#include <sys/proc.h> 127#include <sys/reboot.h> 128#include <sys/sysctl.h> 129#include <sys/syslog.h> 130#include <sys/tty.h> 131#include <machine/bus.h> 132#include <sys/rman.h> 133#include <sys/timepps.h> 134#include <sys/uio.h> 135 136#include <isa/isavar.h> 137 138#include <machine/limits.h> 139#include <machine/resource.h> 140 141#include <dev/sio/sioreg.h> 142#include <dev/sio/siovar.h> 143 144#ifdef PC98 145#include <pc98/pc98/pc98.h> 146#include <pc98/pc98/pc98_machdep.h> 147#endif 148 149#ifdef COM_ESP 150#include <dev/ic/esp.h> 151#endif 152#include <dev/ic/ns16550.h> 153#ifdef PC98 154#include <dev/ic/i8251.h> 155#include <dev/ic/rsa.h> 156#endif 157 158#define LOTS_OF_EVENTS 64 /* helps separate urgent events from input */ 159 160#define CALLOUT_MASK 0x80 161#define CONTROL_MASK 0x60 162#define CONTROL_INIT_STATE 0x20 163#define CONTROL_LOCK_STATE 0x40 164#define DEV_TO_UNIT(dev) (MINOR_TO_UNIT(minor(dev))) 165#define MINOR_TO_UNIT(mynor) ((((mynor) & ~0xffffU) >> (8 + 3)) \ 166 | ((mynor) & 0x1f)) 167#define UNIT_TO_MINOR(unit) ((((unit) & ~0x1fU) << (8 + 3)) \ 168 | ((unit) & 0x1f)) 169 170#ifdef COM_MULTIPORT 171/* checks in flags for multiport and which is multiport "master chip" 172 * for a given card 173 */ 174#define COM_ISMULTIPORT(flags) ((flags) & 0x01) 175#define COM_MPMASTER(flags) (((flags) >> 8) & 0x0ff) 176#define COM_NOTAST4(flags) ((flags) & 0x04) 177#else 178#define COM_ISMULTIPORT(flags) (0) 179#endif /* COM_MULTIPORT */ 180 181#define COM_CONSOLE(flags) ((flags) & 0x10) 182#define COM_FORCECONSOLE(flags) ((flags) & 0x20) 183#define COM_LLCONSOLE(flags) ((flags) & 0x40) 184#define COM_DEBUGGER(flags) ((flags) & 0x80) 185#define COM_LOSESOUTINTS(flags) ((flags) & 0x08) 186#define COM_NOFIFO(flags) ((flags) & 0x02) 187#define COM_ST16650A(flags) ((flags) & 0x20000) 188#define COM_C_NOPROBE (0x40000) 189#define COM_NOPROBE(flags) ((flags) & COM_C_NOPROBE) 190#define COM_C_IIR_TXRDYBUG (0x80000) 191#define COM_IIR_TXRDYBUG(flags) ((flags) & COM_C_IIR_TXRDYBUG) 192#define COM_NOSCR(flags) ((flags) & 0x100000) 193#define COM_FIFOSIZE(flags) (((flags) & 0xff000000) >> 24) 194 195#define sio_getreg(com, off) \ 196 (bus_space_read_1((com)->bst, (com)->bsh, (off))) 197#define sio_setreg(com, off, value) \ 198 (bus_space_write_1((com)->bst, (com)->bsh, (off), (value))) 199 200/* 201 * com state bits. 202 * (CS_BUSY | CS_TTGO) and (CS_BUSY | CS_TTGO | CS_ODEVREADY) must be higher 203 * than the other bits so that they can be tested as a group without masking 204 * off the low bits. 205 * 206 * The following com and tty flags correspond closely: 207 * CS_BUSY = TS_BUSY (maintained by comstart(), siopoll() and 208 * comstop()) 209 * CS_TTGO = ~TS_TTSTOP (maintained by comparam() and comstart()) 210 * CS_CTS_OFLOW = CCTS_OFLOW (maintained by comparam()) 211 * CS_RTS_IFLOW = CRTS_IFLOW (maintained by comparam()) 212 * TS_FLUSH is not used. 213 * XXX I think TIOCSETA doesn't clear TS_TTSTOP when it clears IXON. 214 * XXX CS_*FLOW should be CF_*FLOW in com->flags (control flags not state). 215 */ 216#define CS_BUSY 0x80 /* output in progress */ 217#define CS_TTGO 0x40 /* output not stopped by XOFF */ 218#define CS_ODEVREADY 0x20 /* external device h/w ready (CTS) */ 219#define CS_CHECKMSR 1 /* check of MSR scheduled */ 220#define CS_CTS_OFLOW 2 /* use CTS output flow control */ 221#define CS_DTR_OFF 0x10 /* DTR held off */ 222#define CS_ODONE 4 /* output completed */ 223#define CS_RTS_IFLOW 8 /* use RTS input flow control */ 224#define CSE_BUSYCHECK 1 /* siobusycheck() scheduled */ 225 226static char const * const error_desc[] = { 227#define CE_OVERRUN 0 228 "silo overflow", 229#define CE_INTERRUPT_BUF_OVERFLOW 1 230 "interrupt-level buffer overflow", 231#define CE_TTY_BUF_OVERFLOW 2 232 "tty-level buffer overflow", 233}; 234 235#define CE_NTYPES 3 236#define CE_RECORD(com, errnum) (++(com)->delta_error_counts[errnum]) 237 238/* types. XXX - should be elsewhere */ 239typedef u_int Port_t; /* hardware port */ 240typedef u_char bool_t; /* boolean */ 241 242/* queue of linear buffers */ 243struct lbq { 244 u_char *l_head; /* next char to process */ 245 u_char *l_tail; /* one past the last char to process */ 246 struct lbq *l_next; /* next in queue */ 247 bool_t l_queued; /* nonzero if queued */ 248}; 249 250/* com device structure */ 251struct com_s { 252 u_int flags; /* Copy isa device flags */ 253 u_char state; /* miscellaneous flag bits */ 254 bool_t active_out; /* nonzero if the callout device is open */ 255 u_char cfcr_image; /* copy of value written to CFCR */ 256#ifdef COM_ESP 257 bool_t esp; /* is this unit a hayes esp board? */ 258#endif 259 u_char extra_state; /* more flag bits, separate for order trick */ 260 u_char fifo_image; /* copy of value written to FIFO */ 261 bool_t hasfifo; /* nonzero for 16550 UARTs */ 262 bool_t st16650a; /* Is a Startech 16650A or RTS/CTS compat */ 263 bool_t loses_outints; /* nonzero if device loses output interrupts */ 264 u_char mcr_image; /* copy of value written to MCR */ 265#ifdef COM_MULTIPORT 266 bool_t multiport; /* is this unit part of a multiport device? */ 267#endif /* COM_MULTIPORT */ 268 bool_t no_irq; /* nonzero if irq is not attached */ 269 bool_t gone; /* hardware disappeared */ 270 bool_t poll; /* nonzero if polling is required */ 271 bool_t poll_output; /* nonzero if polling for output is required */ 272 int unit; /* unit number */ 273 int dtr_wait; /* time to hold DTR down on close (* 1/hz) */ 274 u_int tx_fifo_size; 275 u_int wopeners; /* # processes waiting for DCD in open() */ 276 277 /* 278 * The high level of the driver never reads status registers directly 279 * because there would be too many side effects to handle conveniently. 280 * Instead, it reads copies of the registers stored here by the 281 * interrupt handler. 282 */ 283 u_char last_modem_status; /* last MSR read by intr handler */ 284 u_char prev_modem_status; /* last MSR handled by high level */ 285 286 u_char hotchar; /* ldisc-specific char to be handled ASAP */ 287 u_char *ibuf; /* start of input buffer */ 288 u_char *ibufend; /* end of input buffer */ 289 u_char *ibufold; /* old input buffer, to be freed */ 290 u_char *ihighwater; /* threshold in input buffer */ 291 u_char *iptr; /* next free spot in input buffer */ 292 int ibufsize; /* size of ibuf (not include error bytes) */ 293 int ierroff; /* offset of error bytes in ibuf */ 294 295 struct lbq obufq; /* head of queue of output buffers */ 296 struct lbq obufs[2]; /* output buffers */ 297 298 bus_space_tag_t bst; 299 bus_space_handle_t bsh; 300 301#ifdef PC98 302 Port_t cmd_port; 303 Port_t sts_port; 304 Port_t in_modem_port; 305 Port_t intr_ctrl_port; 306 Port_t rsabase; /* Iobase address of an I/O-DATA RSA board. */ 307 int intr_enable; 308 int pc98_prev_modem_status; 309 int pc98_modem_delta; 310 int modem_car_chg_timer; 311 int pc98_prev_siocmd; 312 int pc98_prev_siomod; 313 int modem_checking; 314 int pc98_if_type; 315 316 bool_t pc98_8251fifo; 317 bool_t pc98_8251fifo_enable; 318#endif /* PC98 */ 319 Port_t data_port; /* i/o ports */ 320#ifdef COM_ESP 321 Port_t esp_port; 322#endif 323 Port_t int_id_port; 324 Port_t modem_ctl_port; 325 Port_t line_status_port; 326 Port_t modem_status_port; 327 Port_t intr_ctl_port; /* Ports of IIR register */ 328 329 struct tty *tp; /* cross reference */ 330 331 /* Initial state. */ 332 struct termios it_in; /* should be in struct tty */ 333 struct termios it_out; 334 335 /* Lock state. */ 336 struct termios lt_in; /* should be in struct tty */ 337 struct termios lt_out; 338 339 bool_t do_timestamp; 340 bool_t do_dcd_timestamp; 341 struct timeval timestamp; 342 struct timeval dcd_timestamp; 343 struct pps_state pps; 344 345 u_long bytes_in; /* statistics */ 346 u_long bytes_out; 347 u_int delta_error_counts[CE_NTYPES]; 348 u_long error_counts[CE_NTYPES]; 349 350 u_long rclk; 351 352 struct resource *irqres; 353 struct resource *ioportres; 354 void *cookie; 355 dev_t devs[6]; 356 357 /* 358 * Data area for output buffers. Someday we should build the output 359 * buffer queue without copying data. 360 */ 361#ifdef PC98 362 int obufsize; 363 u_char *obuf1; 364 u_char *obuf2; 365#else 366 u_char obuf1[256]; 367 u_char obuf2[256]; 368#endif 369}; 370 371#ifdef COM_ESP 372static int espattach(struct com_s *com, Port_t esp_port); 373#endif 374 375static timeout_t siobusycheck; 376static u_int siodivisor(u_long rclk, speed_t speed); 377static timeout_t siodtrwakeup; 378static void comhardclose(struct com_s *com); 379static void sioinput(struct com_s *com); 380static void siointr1(struct com_s *com); 381static void siointr(void *arg); 382static int commctl(struct com_s *com, int bits, int how); 383static int comparam(struct tty *tp, struct termios *t); 384static void siopoll(void *); 385static void siosettimeout(void); 386static int siosetwater(struct com_s *com, speed_t speed); 387static void comstart(struct tty *tp); 388static void comstop(struct tty *tp, int rw); 389static timeout_t comwakeup; 390static void disc_optim(struct tty *tp, struct termios *t, 391 struct com_s *com); 392 393char sio_driver_name[] = "sio"; 394static struct mtx sio_lock; 395static int sio_inited; 396 397/* table and macro for fast conversion from a unit number to its com struct */ 398devclass_t sio_devclass; 399#define com_addr(unit) ((struct com_s *) \ 400 devclass_get_softc(sio_devclass, unit)) /* XXX */ 401 402static d_open_t sioopen; 403static d_close_t sioclose; 404static d_read_t sioread; 405static d_write_t siowrite; 406static d_ioctl_t sioioctl; 407 408#define CDEV_MAJOR 28 409static struct cdevsw sio_cdevsw = { 410 /* open */ sioopen, 411 /* close */ sioclose, 412 /* read */ sioread, 413 /* write */ siowrite, 414 /* ioctl */ sioioctl, 415 /* poll */ ttypoll, 416 /* mmap */ nommap, 417 /* strategy */ nostrategy, 418 /* name */ sio_driver_name, 419 /* maj */ CDEV_MAJOR, 420 /* dump */ nodump, 421 /* psize */ nopsize, 422 /* flags */ D_TTY | D_KQFILTER, 423 /* kqfilter */ ttykqfilter, 424}; 425 426int comconsole = -1; 427static volatile speed_t comdefaultrate = CONSPEED; 428static u_long comdefaultrclk = DEFAULT_RCLK; 429SYSCTL_ULONG(_machdep, OID_AUTO, conrclk, CTLFLAG_RW, &comdefaultrclk, 0, ""); 430static speed_t gdbdefaultrate = GDBSPEED; 431SYSCTL_UINT(_machdep, OID_AUTO, gdbspeed, CTLFLAG_RW, 432 &gdbdefaultrate, GDBSPEED, ""); 433static u_int com_events; /* input chars + weighted output completions */ 434static Port_t siocniobase; 435static int siocnunit = -1; 436static Port_t siogdbiobase; 437static int siogdbunit = -1; 438static void *sio_slow_ih; 439static void *sio_fast_ih; 440static int sio_timeout; 441static int sio_timeouts_until_log; 442static struct callout_handle sio_timeout_handle 443 = CALLOUT_HANDLE_INITIALIZER(&sio_timeout_handle); 444static int sio_numunits; 445 446#ifdef PC98 447struct siodev { 448 short if_type; 449 short irq; 450 Port_t cmd, sts, ctrl, mod; 451}; 452static int sysclock; 453 454#define COM_INT_DISABLE {int previpri; previpri=spltty(); 455#define COM_INT_ENABLE splx(previpri);} 456#define IEN_TxFLAG IEN_Tx 457 458#define COM_CARRIER_DETECT_EMULATE 0 459#define PC98_CHECK_MODEM_INTERVAL (hz/10) 460#define DCD_OFF_TOLERANCE 2 461#define DCD_ON_RECOGNITION 2 462#define IS_8251(if_type) (!(if_type & 0x10)) 463#define COM1_EXT_CLOCK 0x40000 464 465static void commint(dev_t dev); 466static void com_tiocm_set(struct com_s *com, int msr); 467static void com_tiocm_bis(struct com_s *com, int msr); 468static void com_tiocm_bic(struct com_s *com, int msr); 469static int com_tiocm_get(struct com_s *com); 470static int com_tiocm_get_delta(struct com_s *com); 471static void pc98_msrint_start(dev_t dev); 472static void com_cflag_and_speed_set(struct com_s *com, int cflag, int speed); 473static int pc98_ttspeedtab(struct com_s *com, int speed, u_int *divisor); 474static int pc98_get_modem_status(struct com_s *com); 475static timeout_t pc98_check_msr; 476static void pc98_set_baud_rate(struct com_s *com, u_int count); 477static void pc98_i8251_reset(struct com_s *com, int mode, int command); 478static void pc98_disable_i8251_interrupt(struct com_s *com, int mod); 479static void pc98_enable_i8251_interrupt(struct com_s *com, int mod); 480static int pc98_check_i8251_interrupt(struct com_s *com); 481static int pc98_i8251_get_cmd(struct com_s *com); 482static int pc98_i8251_get_mod(struct com_s *com); 483static void pc98_i8251_set_cmd(struct com_s *com, int x); 484static void pc98_i8251_or_cmd(struct com_s *com, int x); 485static void pc98_i8251_clear_cmd(struct com_s *com, int x); 486static void pc98_i8251_clear_or_cmd(struct com_s *com, int clr, int x); 487static int pc98_check_if_type(device_t dev, struct siodev *iod); 488static int pc98_check_8251vfast(void); 489static int pc98_check_8251fifo(void); 490static void pc98_check_sysclock(void); 491static void pc98_set_ioport(struct com_s *com); 492 493#define com_int_Tx_disable(com) \ 494 pc98_disable_i8251_interrupt(com,IEN_Tx|IEN_TxEMP) 495#define com_int_Tx_enable(com) \ 496 pc98_enable_i8251_interrupt(com,IEN_TxFLAG) 497#define com_int_Rx_disable(com) \ 498 pc98_disable_i8251_interrupt(com,IEN_Rx) 499#define com_int_Rx_enable(com) \ 500 pc98_enable_i8251_interrupt(com,IEN_Rx) 501#define com_int_TxRx_disable(com) \ 502 pc98_disable_i8251_interrupt(com,IEN_Tx|IEN_TxEMP|IEN_Rx) 503#define com_int_TxRx_enable(com) \ 504 pc98_enable_i8251_interrupt(com,IEN_TxFLAG|IEN_Rx) 505#define com_send_break_on(com) \ 506 pc98_i8251_or_cmd(com,CMD8251_SBRK) 507#define com_send_break_off(com) \ 508 pc98_i8251_clear_cmd(com,CMD8251_SBRK) 509 510static struct speedtab pc98speedtab[] = { /* internal RS232C interface */ 511 { 0, 0, }, 512 { 50, 50, }, 513 { 75, 75, }, 514 { 150, 150, }, 515 { 200, 200, }, 516 { 300, 300, }, 517 { 600, 600, }, 518 { 1200, 1200, }, 519 { 2400, 2400, }, 520 { 4800, 4800, }, 521 { 9600, 9600, }, 522 { 19200, 19200, }, 523 { 38400, 38400, }, 524 { 51200, 51200, }, 525 { 76800, 76800, }, 526 { 20800, 20800, }, 527 { 31200, 31200, }, 528 { 41600, 41600, }, 529 { 62400, 62400, }, 530 { -1, -1 } 531}; 532static struct speedtab pc98fast_speedtab[] = { 533 { 9600, 0x80 | (DEFAULT_RCLK / (16 * (9600))), }, 534 { 19200, 0x80 | (DEFAULT_RCLK / (16 * (19200))), }, 535 { 38400, 0x80 | (DEFAULT_RCLK / (16 * (38400))), }, 536 { 57600, 0x80 | (DEFAULT_RCLK / (16 * (57600))), }, 537 { 115200, 0x80 | (DEFAULT_RCLK / (16 * (115200))), }, 538 { -1, -1 } 539}; 540static struct speedtab comspeedtab_pio9032b[] = { 541 { 300, 6, }, 542 { 600, 5, }, 543 { 1200, 4, }, 544 { 2400, 3, }, 545 { 4800, 2, }, 546 { 9600, 1, }, 547 { 19200, 0, }, 548 { 38400, 7, }, 549 { -1, -1 } 550}; 551static struct speedtab comspeedtab_b98_01[] = { 552 { 75, 11, }, 553 { 150, 10, }, 554 { 300, 9, }, 555 { 600, 8, }, 556 { 1200, 7, }, 557 { 2400, 6, }, 558 { 4800, 5, }, 559 { 9600, 4, }, 560 { 19200, 3, }, 561 { 38400, 2, }, 562 { 76800, 1, }, 563 { 153600, 0, }, 564 { -1, -1 } 565}; 566static struct speedtab comspeedtab_ind[] = { 567 { 300, 1536, }, 568 { 600, 768, }, 569 { 1200, 384, }, 570 { 2400, 192, }, 571 { 4800, 96, }, 572 { 9600, 48, }, 573 { 19200, 24, }, 574 { 38400, 12, }, 575 { 57600, 8, }, 576 { 115200, 4, }, 577 { 153600, 3, }, 578 { 230400, 2, }, 579 { 460800, 1, }, 580 { -1, -1 } 581}; 582 583struct { 584 char *name; 585 short port_table[7]; 586 short irr_mask; 587 struct speedtab *speedtab; 588 short check_irq; 589} if_8251_type[] = { 590 /* COM_IF_INTERNAL */ 591 { " (internal)", {0x30, 0x32, 0x32, 0x33, 0x35, -1, -1}, 592 -1, pc98speedtab, 1 }, 593 /* COM_IF_PC9861K_1 */ 594 { " (PC9861K)", {0xb1, 0xb3, 0xb3, 0xb0, 0xb0, -1, -1}, 595 3, NULL, 1 }, 596 /* COM_IF_PC9861K_2 */ 597 { " (PC9861K)", {0xb9, 0xbb, 0xbb, 0xb2, 0xb2, -1, -1}, 598 3, NULL, 1 }, 599 /* COM_IF_IND_SS_1 */ 600 { " (IND-SS)", {0xb1, 0xb3, 0xb3, 0xb0, 0xb0, 0xb3, -1}, 601 3, comspeedtab_ind, 1 }, 602 /* COM_IF_IND_SS_2 */ 603 { " (IND-SS)", {0xb9, 0xbb, 0xbb, 0xb2, 0xb2, 0xbb, -1}, 604 3, comspeedtab_ind, 1 }, 605 /* COM_IF_PIO9032B_1 */ 606 { " (PIO9032B)", {0xb1, 0xb3, 0xb3, 0xb0, 0xb0, 0xb8, -1}, 607 7, comspeedtab_pio9032b, 1 }, 608 /* COM_IF_PIO9032B_2 */ 609 { " (PIO9032B)", {0xb9, 0xbb, 0xbb, 0xb2, 0xb2, 0xba, -1}, 610 7, comspeedtab_pio9032b, 1 }, 611 /* COM_IF_B98_01_1 */ 612 { " (B98-01)", {0xb1, 0xb3, 0xb3, 0xb0, 0xb0, 0xd1, 0xd3}, 613 7, comspeedtab_b98_01, 0 }, 614 /* COM_IF_B98_01_2 */ 615 { " (B98-01)", {0xb9, 0xbb, 0xbb, 0xb2, 0xb2, 0xd5, 0xd7}, 616 7, comspeedtab_b98_01, 0 }, 617}; 618#define PC98SIO_data_port(type) (if_8251_type[type].port_table[0]) 619#define PC98SIO_cmd_port(type) (if_8251_type[type].port_table[1]) 620#define PC98SIO_sts_port(type) (if_8251_type[type].port_table[2]) 621#define PC98SIO_in_modem_port(type) (if_8251_type[type].port_table[3]) 622#define PC98SIO_intr_ctrl_port(type) (if_8251_type[type].port_table[4]) 623#define PC98SIO_baud_rate_port(type) (if_8251_type[type].port_table[5]) 624#define PC98SIO_func_port(type) (if_8251_type[type].port_table[6]) 625 626#define I8251F_data 0x130 627#define I8251F_lsr 0x132 628#define I8251F_msr 0x134 629#define I8251F_iir 0x136 630#define I8251F_fcr 0x138 631#define I8251F_div 0x13a 632 633 634static bus_addr_t port_table_0[] = 635 {0x000, 0x001, 0x002, 0x003, 0x004, 0x005, 0x006, 0x007}; 636static bus_addr_t port_table_1[] = 637 {0x000, 0x002, 0x004, 0x006, 0x008, 0x00a, 0x00c, 0x00e}; 638static bus_addr_t port_table_8[] = 639 {0x000, 0x100, 0x200, 0x300, 0x400, 0x500, 0x600, 0x700}; 640static bus_addr_t port_table_rsa[] = { 641 0x008, 0x009, 0x00a, 0x00b, 0x00c, 0x00d, 0x00e, 0x00f, 642 0x000, 0x001, 0x002, 0x003, 0x004, 0x005, 0x006, 0x007 643}; 644 645struct { 646 char *name; 647 short irr_read; 648 short irr_write; 649 bus_addr_t *iat; 650 bus_size_t iatsz; 651 u_long rclk; 652} if_16550a_type[] = { 653 /* COM_IF_RSA98 */ 654 {" (RSA-98)", -1, -1, port_table_0, IO_COMSIZE, DEFAULT_RCLK}, 655 /* COM_IF_NS16550 */ 656 {"", -1, -1, port_table_0, IO_COMSIZE, DEFAULT_RCLK}, 657 /* COM_IF_SECOND_CCU */ 658 {"", -1, -1, port_table_0, IO_COMSIZE, DEFAULT_RCLK}, 659 /* COM_IF_MC16550II */ 660 {" (MC16550II)", -1, 0x1000, port_table_8, IO_COMSIZE, 661 DEFAULT_RCLK * 4}, 662 /* COM_IF_MCRS98 */ 663 {" (MC-RS98)", -1, 0x1000, port_table_8, IO_COMSIZE, DEFAULT_RCLK * 4}, 664 /* COM_IF_RSB3000 */ 665 {" (RSB-3000)", 0xbf, -1, port_table_1, IO_COMSIZE, DEFAULT_RCLK * 10}, 666 /* COM_IF_RSB384 */ 667 {" (RSB-384)", 0xbf, -1, port_table_1, IO_COMSIZE, DEFAULT_RCLK * 10}, 668 /* COM_IF_MODEM_CARD */ 669 {"", -1, -1, port_table_0, IO_COMSIZE, DEFAULT_RCLK}, 670 /* COM_IF_RSA98III */ 671 {" (RSA-98III)", -1, -1, port_table_rsa, 16, DEFAULT_RCLK * 8}, 672 /* COM_IF_ESP98 */ 673 {" (ESP98)", -1, -1, port_table_1, IO_COMSIZE, DEFAULT_RCLK * 4}, 674}; 675#endif /* PC98 */ 676 677#ifdef COM_ESP 678#ifdef PC98 679 680/* XXX configure this properly. */ 681/* XXX quite broken for new-bus. */ 682static Port_t likely_com_ports[] = { 0, 0xb0, 0xb1, 0 }; 683static Port_t likely_esp_ports[] = { 0xc0d0, 0 }; 684 685#define ESP98_CMD1 (ESP_CMD1 * 0x100) 686#define ESP98_CMD2 (ESP_CMD2 * 0x100) 687#define ESP98_STATUS1 (ESP_STATUS1 * 0x100) 688#define ESP98_STATUS2 (ESP_STATUS2 * 0x100) 689 690#else /* PC98 */ 691 692/* XXX configure this properly. */ 693static Port_t likely_com_ports[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, }; 694static Port_t likely_esp_ports[] = { 0x140, 0x180, 0x280, 0 }; 695 696#endif /* PC98 */ 697#endif 698 699/* 700 * handle sysctl read/write requests for console speed 701 * 702 * In addition to setting comdefaultrate for I/O through /dev/console, 703 * also set the initial and lock values for the /dev/ttyXX device 704 * if there is one associated with the console. Finally, if the /dev/tty 705 * device has already been open, change the speed on the open running port 706 * itself. 707 */ 708 709static int 710sysctl_machdep_comdefaultrate(SYSCTL_HANDLER_ARGS) 711{ 712 int error, s; 713 speed_t newspeed; 714 struct com_s *com; 715 struct tty *tp; 716 717 newspeed = comdefaultrate; 718 719 error = sysctl_handle_opaque(oidp, &newspeed, sizeof newspeed, req); 720 if (error || !req->newptr) 721 return (error); 722 723 comdefaultrate = newspeed; 724 725 if (comconsole < 0) /* serial console not selected? */ 726 return (0); 727 728 com = com_addr(comconsole); 729 if (com == NULL) 730 return (ENXIO); 731 732 /* 733 * set the initial and lock rates for /dev/ttydXX and /dev/cuaXX 734 * (note, the lock rates really are boolean -- if non-zero, disallow 735 * speed changes) 736 */ 737 com->it_in.c_ispeed = com->it_in.c_ospeed = 738 com->lt_in.c_ispeed = com->lt_in.c_ospeed = 739 com->it_out.c_ispeed = com->it_out.c_ospeed = 740 com->lt_out.c_ispeed = com->lt_out.c_ospeed = comdefaultrate; 741 742 /* 743 * if we're open, change the running rate too 744 */ 745 tp = com->tp; 746 if (tp && (tp->t_state & TS_ISOPEN)) { 747 tp->t_termios.c_ispeed = 748 tp->t_termios.c_ospeed = comdefaultrate; 749 s = spltty(); 750 error = comparam(tp, &tp->t_termios); 751 splx(s); 752 } 753 return error; 754} 755 756SYSCTL_PROC(_machdep, OID_AUTO, conspeed, CTLTYPE_INT | CTLFLAG_RW, 757 0, 0, sysctl_machdep_comdefaultrate, "I", ""); 758 759/* 760 * Unload the driver and clear the table. 761 * XXX this is mostly wrong. 762 * XXX TODO: 763 * This is usually called when the card is ejected, but 764 * can be caused by a kldunload of a controller driver. 765 * The idea is to reset the driver's view of the device 766 * and ensure that any driver entry points such as 767 * read and write do not hang. 768 */ 769int 770siodetach(dev) 771 device_t dev; 772{ 773 struct com_s *com; 774 int i; 775 776 com = (struct com_s *) device_get_softc(dev); 777 if (com == NULL) { 778 device_printf(dev, "NULL com in siounload\n"); 779 return (0); 780 } 781 com->gone = 1; 782 for (i = 0 ; i < 6; i++) 783 destroy_dev(com->devs[i]); 784 if (com->irqres) { 785 bus_teardown_intr(dev, com->irqres, com->cookie); 786 bus_release_resource(dev, SYS_RES_IRQ, 0, com->irqres); 787 } 788 if (com->ioportres) 789 bus_release_resource(dev, SYS_RES_IOPORT, 0, com->ioportres); 790 if (com->tp && (com->tp->t_state & TS_ISOPEN)) { 791 device_printf(dev, "still open, forcing close\n"); 792 (*linesw[com->tp->t_line].l_close)(com->tp, 0); 793 com->tp->t_gen++; 794 ttyclose(com->tp); 795 ttwakeup(com->tp); 796 ttwwakeup(com->tp); 797 } else { 798 if (com->ibuf != NULL) 799 free(com->ibuf, M_DEVBUF); 800#ifdef PC98 801 if (com->obuf1 != NULL) 802 free(com->obuf1, M_DEVBUF); 803#endif 804 device_set_softc(dev, NULL); 805 free(com, M_DEVBUF); 806 } 807 return (0); 808} 809 810int 811sioprobe(dev, xrid, rclk, noprobe) 812 device_t dev; 813 int xrid; 814 u_long rclk; 815 int noprobe; 816{ 817#if 0 818 static bool_t already_init; 819 device_t xdev; 820#endif 821 struct com_s *com; 822 u_int divisor; 823 bool_t failures[10]; 824 int fn; 825 device_t idev; 826 Port_t iobase; 827 intrmask_t irqmap[4]; 828 intrmask_t irqs; 829 u_char mcr_image; 830 int result; 831 u_long xirq; 832 u_int flags = device_get_flags(dev); 833 int rid; 834 struct resource *port; 835#ifdef PC98 836 int tmp; 837 struct siodev iod; 838#endif 839 840#ifdef PC98 841 iod.if_type = GET_IFTYPE(flags); 842 if ((iod.if_type < 0 || iod.if_type > COM_IF_END1) && 843 (iod.if_type < 0x10 || iod.if_type > COM_IF_END2)) 844 return ENXIO; 845#endif 846 847 rid = xrid; 848#ifdef PC98 849 if (IS_8251(iod.if_type)) { 850 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 851 0, ~0, 1, RF_ACTIVE); 852 } else if (iod.if_type == COM_IF_MODEM_CARD || 853 iod.if_type == COM_IF_RSA98III || 854 isa_get_vendorid(dev)) { 855 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 856 if_16550a_type[iod.if_type & 0x0f].iatsz, RF_ACTIVE); 857 } else { 858 port = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, 859 if_16550a_type[iod.if_type & 0x0f].iat, 860 if_16550a_type[iod.if_type & 0x0f].iatsz, RF_ACTIVE); 861 } 862#else 863 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 864 0, ~0, IO_COMSIZE, RF_ACTIVE); 865#endif 866 if (!port) 867 return (ENXIO); 868#ifdef PC98 869 if (!IS_8251(iod.if_type)) { 870 if (isa_load_resourcev(port, 871 if_16550a_type[iod.if_type & 0x0f].iat, 872 if_16550a_type[iod.if_type & 0x0f].iatsz) != 0) { 873 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 874 return ENXIO; 875 } 876 } 877#endif 878 879 com = malloc(sizeof(*com), M_DEVBUF, M_NOWAIT | M_ZERO); 880 if (com == NULL) 881 return (ENOMEM); 882 device_set_softc(dev, com); 883 com->bst = rman_get_bustag(port); 884 com->bsh = rman_get_bushandle(port); 885#ifdef PC98 886 if (!IS_8251(iod.if_type) && rclk == 0) 887 rclk = if_16550a_type[iod.if_type & 0x0f].rclk; 888#else 889 if (rclk == 0) 890 rclk = DEFAULT_RCLK; 891#endif 892 com->rclk = rclk; 893 894 while (sio_inited != 2) 895 if (atomic_cmpset_int(&sio_inited, 0, 1)) { 896 mtx_init(&sio_lock, sio_driver_name, NULL, 897 (comconsole != -1) ? 898 MTX_SPIN | MTX_QUIET : MTX_SPIN); 899 atomic_store_rel_int(&sio_inited, 2); 900 } 901 902#if 0 903 /* 904 * XXX this is broken - when we are first called, there are no 905 * previously configured IO ports. We could hard code 906 * 0x3f8, 0x2f8, 0x3e8, 0x2e8 etc but that's probably worse. 907 * This code has been doing nothing since the conversion since 908 * "count" is zero the first time around. 909 */ 910 if (!already_init) { 911 /* 912 * Turn off MCR_IENABLE for all likely serial ports. An unused 913 * port with its MCR_IENABLE gate open will inhibit interrupts 914 * from any used port that shares the interrupt vector. 915 * XXX the gate enable is elsewhere for some multiports. 916 */ 917 device_t *devs; 918 int count, i, xioport; 919#ifdef PC98 920 int xiftype; 921#endif 922 923 devclass_get_devices(sio_devclass, &devs, &count); 924#ifdef PC98 925 for (i = 0; i < count; i++) { 926 xdev = devs[i]; 927 xioport = bus_get_resource_start(xdev, SYS_RES_IOPORT, 0); 928 xiftype = GET_IFTYPE(device_get_flags(xdev)); 929 if (device_is_enabled(xdev) && xioport > 0) { 930 if (IS_8251(xiftype)) 931 outb((xioport & 0xff00) | PC98SIO_cmd_port(xiftype & 0x0f), 0xf2); 932 else 933 outb(xioport + if_16550a_type[xiftype & 0x0f].iat[com_mcr], 0); 934 } 935 } 936#else 937 for (i = 0; i < count; i++) { 938 xdev = devs[i]; 939 if (device_is_enabled(xdev) && 940 bus_get_resource(xdev, SYS_RES_IOPORT, 0, &xioport, 941 NULL) == 0) 942 outb(xioport + com_mcr, 0); 943 } 944#endif 945 free(devs, M_TEMP); 946 already_init = TRUE; 947 } 948#endif 949 950 if (COM_LLCONSOLE(flags)) { 951 printf("sio%d: reserved for low-level i/o\n", 952 device_get_unit(dev)); 953 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 954 device_set_softc(dev, NULL); 955 free(com, M_DEVBUF); 956 return (ENXIO); 957 } 958 959#ifdef PC98 960 DELAY(10); 961 962 /* 963 * If the port is i8251 UART (internal, B98_01) 964 */ 965 if (pc98_check_if_type(dev, &iod) == -1) { 966 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 967 device_set_softc(dev, NULL); 968 free(com, M_DEVBUF); 969 return (ENXIO); 970 } 971 if (iod.irq > 0) 972 bus_set_resource(dev, SYS_RES_IRQ, 0, iod.irq, 1); 973 if (IS_8251(iod.if_type)) { 974 outb(iod.cmd, 0); 975 DELAY(10); 976 outb(iod.cmd, 0); 977 DELAY(10); 978 outb(iod.cmd, 0); 979 DELAY(10); 980 outb(iod.cmd, CMD8251_RESET); 981 DELAY(1000); /* for a while...*/ 982 outb(iod.cmd, 0xf2); /* MODE (dummy) */ 983 DELAY(10); 984 outb(iod.cmd, 0x01); /* CMD (dummy) */ 985 DELAY(1000); /* for a while...*/ 986 if (( inb(iod.sts) & STS8251_TxEMP ) == 0 ) { 987 result = (ENXIO); 988 } 989 if (if_8251_type[iod.if_type & 0x0f].check_irq) { 990 COM_INT_DISABLE 991 tmp = ( inb( iod.ctrl ) & ~(IEN_Rx|IEN_TxEMP|IEN_Tx)); 992 outb( iod.ctrl, tmp|IEN_TxEMP ); 993 DELAY(10); 994 result = isa_irq_pending() ? 0 : ENXIO; 995 outb( iod.ctrl, tmp ); 996 COM_INT_ENABLE 997 } else { 998 /* 999 * B98_01 doesn't activate TxEMP interrupt line 1000 * when being reset, so we can't check irq pending. 1001 */ 1002 result = 0; 1003 } 1004 if (epson_machine_id==0x20) { /* XXX */ 1005 result = 0; 1006 } 1007 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1008 if (result) { 1009 device_set_softc(dev, NULL); 1010 free(com, M_DEVBUF); 1011 } 1012 return result; 1013 } 1014#endif /* PC98 */ 1015 /* 1016 * If the device is on a multiport card and has an AST/4 1017 * compatible interrupt control register, initialize this 1018 * register and prepare to leave MCR_IENABLE clear in the mcr. 1019 * Otherwise, prepare to set MCR_IENABLE in the mcr. 1020 * Point idev to the device struct giving the correct id_irq. 1021 * This is the struct for the master device if there is one. 1022 */ 1023 idev = dev; 1024 mcr_image = MCR_IENABLE; 1025#ifdef COM_MULTIPORT 1026 if (COM_ISMULTIPORT(flags)) { 1027#ifndef PC98 1028 Port_t xiobase; 1029 u_long io; 1030#endif 1031 1032 idev = devclass_get_device(sio_devclass, COM_MPMASTER(flags)); 1033 if (idev == NULL) { 1034 printf("sio%d: master device %d not configured\n", 1035 device_get_unit(dev), COM_MPMASTER(flags)); 1036 idev = dev; 1037 } 1038#ifndef PC98 1039 if (!COM_NOTAST4(flags)) { 1040 if (bus_get_resource(idev, SYS_RES_IOPORT, 0, &io, 1041 NULL) == 0) { 1042 xiobase = io; 1043 if (bus_get_resource(idev, SYS_RES_IRQ, 0, 1044 NULL, NULL) == 0) 1045 outb(xiobase + com_scr, 0x80); 1046 else 1047 outb(xiobase + com_scr, 0); 1048 } 1049 mcr_image = 0; 1050 } 1051#endif 1052 } 1053#endif /* COM_MULTIPORT */ 1054 if (bus_get_resource(idev, SYS_RES_IRQ, 0, NULL, NULL) != 0) 1055 mcr_image = 0; 1056 1057 bzero(failures, sizeof failures); 1058 iobase = rman_get_start(port); 1059 1060#ifdef PC98 1061 if (iod.if_type == COM_IF_RSA98III) { 1062 mcr_image = 0; 1063 1064 outb(iobase + rsa_msr, 0x04); 1065 outb(iobase + rsa_frr, 0x00); 1066 if ((inb(iobase + rsa_srr) & 0x36) != 0x36) { 1067 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1068 device_set_softc(dev, NULL); 1069 free(com, M_DEVBUF); 1070 return (ENXIO); 1071 } 1072 outb(iobase + rsa_ier, 0x00); 1073 outb(iobase + rsa_frr, 0x00); 1074 outb(iobase + rsa_tivsr, 0x00); 1075 outb(iobase + rsa_tcr, 0x00); 1076 } 1077 1078 tmp = if_16550a_type[iod.if_type & 0x0f].irr_write; 1079 if (tmp != -1) { 1080 /* MC16550II */ 1081 int irqout; 1082 switch (isa_get_irq(idev)) { 1083 case 3: irqout = 4; break; 1084 case 5: irqout = 5; break; 1085 case 6: irqout = 6; break; 1086 case 12: irqout = 7; break; 1087 default: 1088 printf("sio%d: irq configuration error\n", 1089 device_get_unit(dev)); 1090 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1091 device_set_softc(dev, NULL); 1092 free(com, M_DEVBUF); 1093 return (ENXIO); 1094 } 1095 outb((iobase & 0x00ff) | tmp, irqout); 1096 } 1097#endif 1098 1099 /* 1100 * We don't want to get actual interrupts, just masked ones. 1101 * Interrupts from this line should already be masked in the ICU, 1102 * but mask them in the processor as well in case there are some 1103 * (misconfigured) shared interrupts. 1104 */ 1105 mtx_lock_spin(&sio_lock); 1106/* EXTRA DELAY? */ 1107 1108 /* 1109 * Initialize the speed and the word size and wait long enough to 1110 * drain the maximum of 16 bytes of junk in device output queues. 1111 * The speed is undefined after a master reset and must be set 1112 * before relying on anything related to output. There may be 1113 * junk after a (very fast) soft reboot and (apparently) after 1114 * master reset. 1115 * XXX what about the UART bug avoided by waiting in comparam()? 1116 * We don't want to to wait long enough to drain at 2 bps. 1117 */ 1118 if (iobase == siocniobase) 1119 DELAY((16 + 1) * 1000000 / (comdefaultrate / 10)); 1120 else { 1121 sio_setreg(com, com_cfcr, CFCR_DLAB | CFCR_8BITS); 1122 divisor = siodivisor(rclk, SIO_TEST_SPEED); 1123 sio_setreg(com, com_dlbl, divisor & 0xff); 1124 sio_setreg(com, com_dlbh, divisor >> 8); 1125 sio_setreg(com, com_cfcr, CFCR_8BITS); 1126 DELAY((16 + 1) * 1000000 / (SIO_TEST_SPEED / 10)); 1127 } 1128 1129 /* 1130 * Enable the interrupt gate and disable device interupts. This 1131 * should leave the device driving the interrupt line low and 1132 * guarantee an edge trigger if an interrupt can be generated. 1133 */ 1134/* EXTRA DELAY? */ 1135 sio_setreg(com, com_mcr, mcr_image); 1136 sio_setreg(com, com_ier, 0); 1137 DELAY(1000); /* XXX */ 1138 irqmap[0] = isa_irq_pending(); 1139 1140 /* 1141 * Attempt to set loopback mode so that we can send a null byte 1142 * without annoying any external device. 1143 */ 1144/* EXTRA DELAY? */ 1145 sio_setreg(com, com_mcr, mcr_image | MCR_LOOPBACK); 1146 1147 /* 1148 * Attempt to generate an output interrupt. On 8250's, setting 1149 * IER_ETXRDY generates an interrupt independent of the current 1150 * setting and independent of whether the THR is empty. On 16450's, 1151 * setting IER_ETXRDY generates an interrupt independent of the 1152 * current setting. On 16550A's, setting IER_ETXRDY only 1153 * generates an interrupt when IER_ETXRDY is not already set. 1154 */ 1155 sio_setreg(com, com_ier, IER_ETXRDY); 1156#ifdef PC98 1157 if (iod.if_type == COM_IF_RSA98III) 1158 outb(iobase + rsa_ier, 0x04); 1159#endif 1160 1161 /* 1162 * On some 16x50 incompatibles, setting IER_ETXRDY doesn't generate 1163 * an interrupt. They'd better generate one for actually doing 1164 * output. Loopback may be broken on the same incompatibles but 1165 * it's unlikely to do more than allow the null byte out. 1166 */ 1167 sio_setreg(com, com_data, 0); 1168 DELAY((1 + 2) * 1000000 / (SIO_TEST_SPEED / 10)); 1169 1170 /* 1171 * Turn off loopback mode so that the interrupt gate works again 1172 * (MCR_IENABLE was hidden). This should leave the device driving 1173 * an interrupt line high. It doesn't matter if the interrupt 1174 * line oscillates while we are not looking at it, since interrupts 1175 * are disabled. 1176 */ 1177/* EXTRA DELAY? */ 1178 sio_setreg(com, com_mcr, mcr_image); 1179 1180 /* 1181 * It seems my Xircom CBEM56G Cardbus modem wants to be reset 1182 * to 8 bits *again*, or else probe test 0 will fail. 1183 * gwk@sgi.com, 4/19/2001 1184 */ 1185 sio_setreg(com, com_cfcr, CFCR_8BITS); 1186 1187 /* 1188 * Some pcmcia cards have the "TXRDY bug", so we check everyone 1189 * for IIR_TXRDY implementation ( Palido 321s, DC-1S... ) 1190 */ 1191 if (noprobe) { 1192 /* Reading IIR register twice */ 1193 for (fn = 0; fn < 2; fn ++) { 1194 DELAY(10000); 1195 failures[6] = sio_getreg(com, com_iir); 1196 } 1197 /* Check IIR_TXRDY clear ? */ 1198 result = 0; 1199 if (failures[6] & IIR_TXRDY) { 1200 /* No, Double check with clearing IER */ 1201 sio_setreg(com, com_ier, 0); 1202 if (sio_getreg(com, com_iir) & IIR_NOPEND) { 1203 /* Ok. We discovered TXRDY bug! */ 1204 SET_FLAG(dev, COM_C_IIR_TXRDYBUG); 1205 } else { 1206 /* Unknown, Just omit this chip.. XXX */ 1207 result = ENXIO; 1208 sio_setreg(com, com_mcr, 0); 1209 } 1210 } else { 1211 /* OK. this is well-known guys */ 1212 CLR_FLAG(dev, COM_C_IIR_TXRDYBUG); 1213 } 1214 sio_setreg(com, com_ier, 0); 1215 sio_setreg(com, com_cfcr, CFCR_8BITS); 1216 mtx_unlock_spin(&sio_lock); 1217 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1218 if (iobase == siocniobase) 1219 result = 0; 1220 if (result != 0) { 1221 device_set_softc(dev, NULL); 1222 free(com, M_DEVBUF); 1223 } 1224 return (result); 1225 } 1226 1227 /* 1228 * Check that 1229 * o the CFCR, IER and MCR in UART hold the values written to them 1230 * (the values happen to be all distinct - this is good for 1231 * avoiding false positive tests from bus echoes). 1232 * o an output interrupt is generated and its vector is correct. 1233 * o the interrupt goes away when the IIR in the UART is read. 1234 */ 1235/* EXTRA DELAY? */ 1236 failures[0] = sio_getreg(com, com_cfcr) - CFCR_8BITS; 1237 failures[1] = sio_getreg(com, com_ier) - IER_ETXRDY; 1238 failures[2] = sio_getreg(com, com_mcr) - mcr_image; 1239 DELAY(10000); /* Some internal modems need this time */ 1240 irqmap[1] = isa_irq_pending(); 1241 failures[4] = (sio_getreg(com, com_iir) & IIR_IMASK) - IIR_TXRDY; 1242#ifdef PC98 1243 if (iod.if_type == COM_IF_RSA98III) 1244 inb(iobase + rsa_srr); 1245#endif 1246 DELAY(1000); /* XXX */ 1247 irqmap[2] = isa_irq_pending(); 1248 failures[6] = (sio_getreg(com, com_iir) & IIR_IMASK) - IIR_NOPEND; 1249#ifdef PC98 1250 if (iod.if_type == COM_IF_RSA98III) 1251 inb(iobase + rsa_srr); 1252#endif 1253 1254 /* 1255 * Turn off all device interrupts and check that they go off properly. 1256 * Leave MCR_IENABLE alone. For ports without a master port, it gates 1257 * the OUT2 output of the UART to 1258 * the ICU input. Closing the gate would give a floating ICU input 1259 * (unless there is another device driving it) and spurious interrupts. 1260 * (On the system that this was first tested on, the input floats high 1261 * and gives a (masked) interrupt as soon as the gate is closed.) 1262 */ 1263 sio_setreg(com, com_ier, 0); 1264 sio_setreg(com, com_cfcr, CFCR_8BITS); /* dummy to avoid bus echo */ 1265 failures[7] = sio_getreg(com, com_ier); 1266#ifdef PC98 1267 if (iod.if_type == COM_IF_RSA98III) 1268 outb(iobase + rsa_ier, 0x00); 1269#endif 1270 DELAY(1000); /* XXX */ 1271 irqmap[3] = isa_irq_pending(); 1272 failures[9] = (sio_getreg(com, com_iir) & IIR_IMASK) - IIR_NOPEND; 1273#ifdef PC98 1274 if (iod.if_type == COM_IF_RSA98III) { 1275 inb(iobase + rsa_srr); 1276 outb(iobase + rsa_frr, 0x00); 1277 } 1278#endif 1279 1280 mtx_unlock_spin(&sio_lock); 1281 1282 irqs = irqmap[1] & ~irqmap[0]; 1283 if (bus_get_resource(idev, SYS_RES_IRQ, 0, &xirq, NULL) == 0 && 1284 ((1 << xirq) & irqs) == 0) { 1285 printf( 1286 "sio%d: configured irq %ld not in bitmap of probed irqs %#x\n", 1287 device_get_unit(dev), xirq, irqs); 1288 printf( 1289 "sio%d: port may not be enabled\n", 1290 device_get_unit(dev)); 1291 } 1292 if (bootverbose) 1293 printf("sio%d: irq maps: %#x %#x %#x %#x\n", 1294 device_get_unit(dev), 1295 irqmap[0], irqmap[1], irqmap[2], irqmap[3]); 1296 1297 result = 0; 1298 for (fn = 0; fn < sizeof failures; ++fn) 1299 if (failures[fn]) { 1300 sio_setreg(com, com_mcr, 0); 1301 result = ENXIO; 1302 if (bootverbose) { 1303 printf("sio%d: probe failed test(s):", 1304 device_get_unit(dev)); 1305 for (fn = 0; fn < sizeof failures; ++fn) 1306 if (failures[fn]) 1307 printf(" %d", fn); 1308 printf("\n"); 1309 } 1310 break; 1311 } 1312 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1313 if (iobase == siocniobase) 1314 result = 0; 1315 if (result != 0) { 1316 device_set_softc(dev, NULL); 1317 free(com, M_DEVBUF); 1318 } 1319 return (result); 1320} 1321 1322#ifdef COM_ESP 1323static int 1324espattach(com, esp_port) 1325 struct com_s *com; 1326 Port_t esp_port; 1327{ 1328 u_char dips; 1329 u_char val; 1330 1331 /* 1332 * Check the ESP-specific I/O port to see if we're an ESP 1333 * card. If not, return failure immediately. 1334 */ 1335 if ((inb(esp_port) & 0xf3) == 0) { 1336 printf(" port 0x%x is not an ESP board?\n", esp_port); 1337 return (0); 1338 } 1339 1340 /* 1341 * We've got something that claims to be a Hayes ESP card. 1342 * Let's hope so. 1343 */ 1344 1345 /* Get the dip-switch configuration */ 1346#ifdef PC98 1347 outb(esp_port + ESP98_CMD1, ESP_GETDIPS); 1348 dips = inb(esp_port + ESP98_STATUS1); 1349#else 1350 outb(esp_port + ESP_CMD1, ESP_GETDIPS); 1351 dips = inb(esp_port + ESP_STATUS1); 1352#endif 1353 1354 /* 1355 * Bits 0,1 of dips say which COM port we are. 1356 */ 1357#ifdef PC98 1358 if ((rman_get_start(com->ioportres) & 0xff) == 1359 likely_com_ports[dips & 0x03]) 1360#else 1361 if (rman_get_start(com->ioportres) == likely_com_ports[dips & 0x03]) 1362#endif 1363 printf(" : ESP"); 1364 else { 1365 printf(" esp_port has com %d\n", dips & 0x03); 1366 return (0); 1367 } 1368 1369 /* 1370 * Check for ESP version 2.0 or later: bits 4,5,6 = 010. 1371 */ 1372#ifdef PC98 1373 outb(esp_port + ESP98_CMD1, ESP_GETTEST); 1374 val = inb(esp_port + ESP98_STATUS1); /* clear reg 1 */ 1375 val = inb(esp_port + ESP98_STATUS2); 1376#else 1377 outb(esp_port + ESP_CMD1, ESP_GETTEST); 1378 val = inb(esp_port + ESP_STATUS1); /* clear reg 1 */ 1379 val = inb(esp_port + ESP_STATUS2); 1380#endif 1381 if ((val & 0x70) < 0x20) { 1382 printf("-old (%o)", val & 0x70); 1383 return (0); 1384 } 1385 1386 /* 1387 * Check for ability to emulate 16550: bit 7 == 1 1388 */ 1389 if ((dips & 0x80) == 0) { 1390 printf(" slave"); 1391 return (0); 1392 } 1393 1394 /* 1395 * Okay, we seem to be a Hayes ESP card. Whee. 1396 */ 1397 com->esp = TRUE; 1398 com->esp_port = esp_port; 1399 return (1); 1400} 1401#endif /* COM_ESP */ 1402 1403int 1404sioattach(dev, xrid, rclk) 1405 device_t dev; 1406 int xrid; 1407 u_long rclk; 1408{ 1409 struct com_s *com; 1410#ifdef COM_ESP 1411 Port_t *espp; 1412#endif 1413 Port_t iobase; 1414 int minorbase; 1415 int unit; 1416 u_int flags; 1417 int rid; 1418 struct resource *port; 1419 int ret; 1420#ifdef PC98 1421 u_char *obuf; 1422 u_long obufsize; 1423 int if_type = GET_IFTYPE(device_get_flags(dev)); 1424#endif 1425 1426 rid = xrid; 1427#ifdef PC98 1428 if (IS_8251(if_type)) { 1429 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 1430 0, ~0, 1, RF_ACTIVE); 1431 } else if (if_type == COM_IF_MODEM_CARD || 1432 if_type == COM_IF_RSA98III || 1433 isa_get_vendorid(dev)) { 1434 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1435 if_16550a_type[if_type & 0x0f].iatsz, RF_ACTIVE); 1436 } else { 1437 port = isa_alloc_resourcev(dev, SYS_RES_IOPORT, &rid, 1438 if_16550a_type[if_type & 0x0f].iat, 1439 if_16550a_type[if_type & 0x0f].iatsz, RF_ACTIVE); 1440 } 1441#else 1442 port = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 1443 0, ~0, IO_COMSIZE, RF_ACTIVE); 1444#endif 1445 if (!port) 1446 return (ENXIO); 1447#ifdef PC98 1448 if (!IS_8251(if_type)) { 1449 if (isa_load_resourcev(port, 1450 if_16550a_type[if_type & 0x0f].iat, 1451 if_16550a_type[if_type & 0x0f].iatsz) != 0) { 1452 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1453 return ENXIO; 1454 } 1455 } 1456#endif 1457 1458 iobase = rman_get_start(port); 1459 unit = device_get_unit(dev); 1460 com = device_get_softc(dev); 1461 flags = device_get_flags(dev); 1462 1463 if (unit >= sio_numunits) 1464 sio_numunits = unit + 1; 1465 1466#ifdef PC98 1467 obufsize = 256; 1468 if (if_type == COM_IF_RSA98III) 1469 obufsize = 2048; 1470 if ((obuf = malloc(obufsize * 2, M_DEVBUF, M_NOWAIT)) == NULL) { 1471 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1472 return ENXIO; 1473 } 1474 bzero(obuf, obufsize * 2); 1475#endif 1476 1477 /* 1478 * sioprobe() has initialized the device registers as follows: 1479 * o cfcr = CFCR_8BITS. 1480 * It is most important that CFCR_DLAB is off, so that the 1481 * data port is not hidden when we enable interrupts. 1482 * o ier = 0. 1483 * Interrupts are only enabled when the line is open. 1484 * o mcr = MCR_IENABLE, or 0 if the port has AST/4 compatible 1485 * interrupt control register or the config specifies no irq. 1486 * Keeping MCR_DTR and MCR_RTS off might stop the external 1487 * device from sending before we are ready. 1488 */ 1489 bzero(com, sizeof *com); 1490 com->unit = unit; 1491 com->ioportres = port; 1492 com->bst = rman_get_bustag(port); 1493 com->bsh = rman_get_bushandle(port); 1494 com->cfcr_image = CFCR_8BITS; 1495 com->dtr_wait = 3 * hz; 1496 com->loses_outints = COM_LOSESOUTINTS(flags) != 0; 1497 com->no_irq = bus_get_resource(dev, SYS_RES_IRQ, 0, NULL, NULL) != 0; 1498 com->tx_fifo_size = 1; 1499#ifdef PC98 1500 com->obufsize = obufsize; 1501 com->obuf1 = obuf; 1502 com->obuf2 = obuf + obufsize; 1503#endif 1504 com->obufs[0].l_head = com->obuf1; 1505 com->obufs[1].l_head = com->obuf2; 1506 1507#ifdef PC98 1508 com->pc98_if_type = if_type; 1509 1510 if (IS_8251(if_type)) { 1511 pc98_set_ioport(com); 1512 1513 if (if_type == COM_IF_INTERNAL && pc98_check_8251fifo()) { 1514 com->pc98_8251fifo = 1; 1515 com->pc98_8251fifo_enable = 0; 1516 } 1517 } else { 1518 bus_addr_t *iat = if_16550a_type[if_type & 0x0f].iat; 1519 1520 com->data_port = iobase + iat[com_data]; 1521 com->int_id_port = iobase + iat[com_iir]; 1522 com->modem_ctl_port = iobase + iat[com_mcr]; 1523 com->mcr_image = inb(com->modem_ctl_port); 1524 com->line_status_port = iobase + iat[com_lsr]; 1525 com->modem_status_port = iobase + iat[com_msr]; 1526 com->intr_ctl_port = iobase + iat[com_ier]; 1527 } 1528#else /* not PC98 */ 1529 com->data_port = iobase + com_data; 1530 com->int_id_port = iobase + com_iir; 1531 com->modem_ctl_port = iobase + com_mcr; 1532 com->mcr_image = inb(com->modem_ctl_port); 1533 com->line_status_port = iobase + com_lsr; 1534 com->modem_status_port = iobase + com_msr; 1535 com->intr_ctl_port = iobase + com_ier; 1536#endif 1537 1538#ifdef PC98 1539 if (!IS_8251(if_type) && rclk == 0) 1540 rclk = if_16550a_type[if_type & 0x0f].rclk; 1541#else 1542 if (rclk == 0) 1543 rclk = DEFAULT_RCLK; 1544#endif 1545 com->rclk = rclk; 1546 1547 /* 1548 * We don't use all the flags from <sys/ttydefaults.h> since they 1549 * are only relevant for logins. It's important to have echo off 1550 * initially so that the line doesn't start blathering before the 1551 * echo flag can be turned off. 1552 */ 1553 com->it_in.c_iflag = 0; 1554 com->it_in.c_oflag = 0; 1555 com->it_in.c_cflag = TTYDEF_CFLAG; 1556 com->it_in.c_lflag = 0; 1557 if (unit == comconsole) { 1558#ifdef PC98 1559 if (IS_8251(com->pc98_if_type)) 1560 DELAY(100000); 1561#endif 1562 com->it_in.c_iflag = TTYDEF_IFLAG; 1563 com->it_in.c_oflag = TTYDEF_OFLAG; 1564 com->it_in.c_cflag = TTYDEF_CFLAG | CLOCAL; 1565 com->it_in.c_lflag = TTYDEF_LFLAG; 1566 com->lt_out.c_cflag = com->lt_in.c_cflag = CLOCAL; 1567 com->lt_out.c_ispeed = com->lt_out.c_ospeed = 1568 com->lt_in.c_ispeed = com->lt_in.c_ospeed = 1569 com->it_in.c_ispeed = com->it_in.c_ospeed = comdefaultrate; 1570 } else 1571 com->it_in.c_ispeed = com->it_in.c_ospeed = TTYDEF_SPEED; 1572 if (siosetwater(com, com->it_in.c_ispeed) != 0) { 1573 mtx_unlock_spin(&sio_lock); 1574 /* 1575 * Leave i/o resources allocated if this is a `cn'-level 1576 * console, so that other devices can't snarf them. 1577 */ 1578 if (iobase != siocniobase) 1579 bus_release_resource(dev, SYS_RES_IOPORT, rid, port); 1580 return (ENOMEM); 1581 } 1582 mtx_unlock_spin(&sio_lock); 1583 termioschars(&com->it_in); 1584 com->it_out = com->it_in; 1585 1586 /* attempt to determine UART type */ 1587 printf("sio%d: type", unit); 1588 1589 1590#ifndef PC98 1591 if (!COM_ISMULTIPORT(flags) && 1592 !COM_IIR_TXRDYBUG(flags) && !COM_NOSCR(flags)) { 1593 u_char scr; 1594 u_char scr1; 1595 u_char scr2; 1596 1597 scr = sio_getreg(com, com_scr); 1598 sio_setreg(com, com_scr, 0xa5); 1599 scr1 = sio_getreg(com, com_scr); 1600 sio_setreg(com, com_scr, 0x5a); 1601 scr2 = sio_getreg(com, com_scr); 1602 sio_setreg(com, com_scr, scr); 1603 if (scr1 != 0xa5 || scr2 != 0x5a) { 1604 printf(" 8250 or not responding"); 1605 goto determined_type; 1606 } 1607 } 1608#endif /* !PC98 */ 1609#ifdef PC98 1610 if (IS_8251(com->pc98_if_type)) { 1611 if (com->pc98_8251fifo && !COM_NOFIFO(flags)) 1612 com->tx_fifo_size = 16; 1613 com_int_TxRx_disable( com ); 1614 com_cflag_and_speed_set( com, com->it_in.c_cflag, comdefaultrate ); 1615 com_tiocm_bic( com, TIOCM_DTR|TIOCM_RTS|TIOCM_LE ); 1616 com_send_break_off( com ); 1617 1618 if (com->pc98_if_type == COM_IF_INTERNAL) { 1619 printf(" (internal%s%s)", 1620 com->pc98_8251fifo ? " fifo" : "", 1621 PC98SIO_baud_rate_port(com->pc98_if_type) != -1 ? 1622 " v-fast" : ""); 1623 } else { 1624 printf(" 8251%s", if_8251_type[com->pc98_if_type & 0x0f].name); 1625 } 1626 } else { 1627#endif /* PC98 */ 1628 sio_setreg(com, com_fifo, FIFO_ENABLE | FIFO_RX_HIGH); 1629 DELAY(100); 1630 com->st16650a = 0; 1631 switch (inb(com->int_id_port) & IIR_FIFO_MASK) { 1632 case FIFO_RX_LOW: 1633 printf(" 16450"); 1634 break; 1635 case FIFO_RX_MEDL: 1636 printf(" 16450?"); 1637 break; 1638 case FIFO_RX_MEDH: 1639 printf(" 16550?"); 1640 break; 1641 case FIFO_RX_HIGH: 1642 if (COM_NOFIFO(flags)) { 1643 printf(" 16550A fifo disabled"); 1644 } else { 1645 com->hasfifo = TRUE; 1646#ifdef PC98 1647 com->tx_fifo_size = 0; /* XXX flag conflicts. */ 1648 printf(" 16550A"); 1649#else 1650 if (COM_ST16650A(flags)) { 1651 com->st16650a = 1; 1652 com->tx_fifo_size = 32; 1653 printf(" ST16650A"); 1654 } else { 1655 com->tx_fifo_size = COM_FIFOSIZE(flags); 1656 printf(" 16550A"); 1657 } 1658#endif 1659 } 1660#ifdef PC98 1661 if (com->pc98_if_type == COM_IF_RSA98III) { 1662 com->tx_fifo_size = 2048; 1663 com->rsabase = iobase; 1664 outb(com->rsabase + rsa_ier, 0x00); 1665 outb(com->rsabase + rsa_frr, 0x00); 1666 } 1667#endif 1668 1669#ifdef COM_ESP 1670#ifdef PC98 1671 if (com->pc98_if_type == COM_IF_ESP98) 1672#endif 1673 for (espp = likely_esp_ports; *espp != 0; espp++) 1674 if (espattach(com, *espp)) { 1675 com->tx_fifo_size = 1024; 1676 break; 1677 } 1678#endif 1679 if (!com->st16650a) { 1680 if (!com->tx_fifo_size) 1681 com->tx_fifo_size = 16; 1682 else 1683 printf(" lookalike with %d bytes FIFO", 1684 com->tx_fifo_size); 1685 } 1686 1687 break; 1688 } 1689 1690#ifdef PC98 1691 if (com->pc98_if_type == COM_IF_RSB3000) { 1692 /* Set RSB-2000/3000 Extended Buffer mode. */ 1693 u_char lcr; 1694 lcr = sio_getreg(com, com_cfcr); 1695 sio_setreg(com, com_cfcr, lcr | CFCR_DLAB); 1696 sio_setreg(com, com_emr, EMR_EXBUFF | EMR_EFMODE); 1697 sio_setreg(com, com_cfcr, lcr); 1698 } 1699#endif 1700 1701#ifdef COM_ESP 1702 if (com->esp) { 1703 /* 1704 * Set 16550 compatibility mode. 1705 * We don't use the ESP_MODE_SCALE bit to increase the 1706 * fifo trigger levels because we can't handle large 1707 * bursts of input. 1708 * XXX flow control should be set in comparam(), not here. 1709 */ 1710#ifdef PC98 1711 outb(com->esp_port + ESP98_CMD1, ESP_SETMODE); 1712 outb(com->esp_port + ESP98_CMD2, ESP_MODE_RTS | ESP_MODE_FIFO); 1713#else 1714 outb(com->esp_port + ESP_CMD1, ESP_SETMODE); 1715 outb(com->esp_port + ESP_CMD2, ESP_MODE_RTS | ESP_MODE_FIFO); 1716#endif 1717 1718 /* Set RTS/CTS flow control. */ 1719#ifdef PC98 1720 outb(com->esp_port + ESP98_CMD1, ESP_SETFLOWTYPE); 1721 outb(com->esp_port + ESP98_CMD2, ESP_FLOW_RTS); 1722 outb(com->esp_port + ESP98_CMD2, ESP_FLOW_CTS); 1723#else 1724 outb(com->esp_port + ESP_CMD1, ESP_SETFLOWTYPE); 1725 outb(com->esp_port + ESP_CMD2, ESP_FLOW_RTS); 1726 outb(com->esp_port + ESP_CMD2, ESP_FLOW_CTS); 1727#endif 1728 1729 /* Set flow-control levels. */ 1730#ifdef PC98 1731 outb(com->esp_port + ESP98_CMD1, ESP_SETRXFLOW); 1732 outb(com->esp_port + ESP98_CMD2, HIBYTE(768)); 1733 outb(com->esp_port + ESP98_CMD2, LOBYTE(768)); 1734 outb(com->esp_port + ESP98_CMD2, HIBYTE(512)); 1735 outb(com->esp_port + ESP98_CMD2, LOBYTE(512)); 1736#else 1737 outb(com->esp_port + ESP_CMD1, ESP_SETRXFLOW); 1738 outb(com->esp_port + ESP_CMD2, HIBYTE(768)); 1739 outb(com->esp_port + ESP_CMD2, LOBYTE(768)); 1740 outb(com->esp_port + ESP_CMD2, HIBYTE(512)); 1741 outb(com->esp_port + ESP_CMD2, LOBYTE(512)); 1742#endif 1743 1744#ifdef PC98 1745 /* Set UART clock prescaler. */ 1746 outb(com->esp_port + ESP98_CMD1, ESP_SETCLOCK); 1747 outb(com->esp_port + ESP98_CMD2, 2); /* 4 times */ 1748#endif 1749 } 1750#endif /* COM_ESP */ 1751 sio_setreg(com, com_fifo, 0); 1752#ifdef PC98 1753 printf("%s", if_16550a_type[com->pc98_if_type & 0x0f].name); 1754#else 1755determined_type: ; 1756#endif 1757 1758#ifdef COM_MULTIPORT 1759 if (COM_ISMULTIPORT(flags)) { 1760 device_t masterdev; 1761 1762 com->multiport = TRUE; 1763 printf(" (multiport"); 1764 if (unit == COM_MPMASTER(flags)) 1765 printf(" master"); 1766 printf(")"); 1767 masterdev = devclass_get_device(sio_devclass, 1768 COM_MPMASTER(flags)); 1769 com->no_irq = (masterdev == NULL || bus_get_resource(masterdev, 1770 SYS_RES_IRQ, 0, NULL, NULL) != 0); 1771 } 1772#endif /* COM_MULTIPORT */ 1773#ifdef PC98 1774 } 1775#endif 1776 if (unit == comconsole) 1777 printf(", console"); 1778 if (COM_IIR_TXRDYBUG(flags)) 1779 printf(" with a bogus IIR_TXRDY register"); 1780 printf("\n"); 1781 1782 if (sio_fast_ih == NULL) { 1783 swi_add(&tty_ithd, "tty:sio", siopoll, NULL, SWI_TTY, 0, 1784 &sio_fast_ih); 1785 swi_add(&clk_ithd, "tty:sio", siopoll, NULL, SWI_TTY, 0, 1786 &sio_slow_ih); 1787 } 1788 minorbase = UNIT_TO_MINOR(unit); 1789 com->devs[0] = make_dev(&sio_cdevsw, minorbase, 1790 UID_ROOT, GID_WHEEL, 0600, "ttyd%r", unit); 1791 com->devs[1] = make_dev(&sio_cdevsw, minorbase | CONTROL_INIT_STATE, 1792 UID_ROOT, GID_WHEEL, 0600, "ttyid%r", unit); 1793 com->devs[2] = make_dev(&sio_cdevsw, minorbase | CONTROL_LOCK_STATE, 1794 UID_ROOT, GID_WHEEL, 0600, "ttyld%r", unit); 1795 com->devs[3] = make_dev(&sio_cdevsw, minorbase | CALLOUT_MASK, 1796 UID_UUCP, GID_DIALER, 0660, "cuaa%r", unit); 1797 com->devs[4] = make_dev(&sio_cdevsw, 1798 minorbase | CALLOUT_MASK | CONTROL_INIT_STATE, 1799 UID_UUCP, GID_DIALER, 0660, "cuaia%r", unit); 1800 com->devs[5] = make_dev(&sio_cdevsw, 1801 minorbase | CALLOUT_MASK | CONTROL_LOCK_STATE, 1802 UID_UUCP, GID_DIALER, 0660, "cuala%r", unit); 1803 for (rid = 0; rid < 6; rid++) 1804 com->devs[rid]->si_drv1 = com; 1805 com->flags = flags; 1806 com->pps.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR; 1807 pps_init(&com->pps); 1808 1809 rid = 0; 1810 com->irqres = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0ul, ~0ul, 1, 1811 RF_ACTIVE); 1812 if (com->irqres) { 1813 ret = BUS_SETUP_INTR(device_get_parent(dev), dev, com->irqres, 1814 INTR_TYPE_TTY | INTR_FAST, 1815 siointr, com, &com->cookie); 1816 if (ret) { 1817 ret = BUS_SETUP_INTR(device_get_parent(dev), dev, 1818 com->irqres, INTR_TYPE_TTY, 1819 siointr, com, &com->cookie); 1820 if (ret == 0) 1821 device_printf(dev, "unable to activate interrupt in fast mode - using normal mode\n"); 1822 } 1823 if (ret) 1824 device_printf(dev, "could not activate interrupt\n"); 1825#if defined(DDB) && (defined(BREAK_TO_DEBUGGER) || \ 1826 defined(ALT_BREAK_TO_DEBUGGER)) 1827 /* 1828 * Enable interrupts for early break-to-debugger support 1829 * on the console. 1830 */ 1831 if (ret == 0 && unit == comconsole) 1832 outb(siocniobase + com_ier, IER_ERXRDY | IER_ERLS | 1833 IER_EMSC); 1834#endif 1835 } 1836 1837 return (0); 1838} 1839 1840static int 1841sioopen(dev, flag, mode, td) 1842 dev_t dev; 1843 int flag; 1844 int mode; 1845 struct thread *td; 1846{ 1847 struct com_s *com; 1848 int error; 1849 int mynor; 1850 int s; 1851 struct tty *tp; 1852 int unit; 1853 1854 mynor = minor(dev); 1855 unit = MINOR_TO_UNIT(mynor); 1856 com = com_addr(unit); 1857 if (com == NULL) 1858 return (ENXIO); 1859 if (com->gone) 1860 return (ENXIO); 1861 if (mynor & CONTROL_MASK) 1862 return (0); 1863 tp = dev->si_tty = com->tp = ttymalloc(com->tp); 1864 s = spltty(); 1865 /* 1866 * We jump to this label after all non-interrupted sleeps to pick 1867 * up any changes of the device state. 1868 */ 1869open_top: 1870 while (com->state & CS_DTR_OFF) { 1871 error = tsleep(&com->dtr_wait, TTIPRI | PCATCH, "siodtr", 0); 1872 if (com_addr(unit) == NULL) 1873 return (ENXIO); 1874 if (error != 0 || com->gone) 1875 goto out; 1876 } 1877 if (tp->t_state & TS_ISOPEN) { 1878 /* 1879 * The device is open, so everything has been initialized. 1880 * Handle conflicts. 1881 */ 1882 if (mynor & CALLOUT_MASK) { 1883 if (!com->active_out) { 1884 error = EBUSY; 1885 goto out; 1886 } 1887 } else { 1888 if (com->active_out) { 1889 if (flag & O_NONBLOCK) { 1890 error = EBUSY; 1891 goto out; 1892 } 1893 error = tsleep(&com->active_out, 1894 TTIPRI | PCATCH, "siobi", 0); 1895 if (com_addr(unit) == NULL) 1896 return (ENXIO); 1897 if (error != 0 || com->gone) 1898 goto out; 1899 goto open_top; 1900 } 1901 } 1902 if (tp->t_state & TS_XCLUDE && 1903 suser(td)) { 1904 error = EBUSY; 1905 goto out; 1906 } 1907 } else { 1908 /* 1909 * The device isn't open, so there are no conflicts. 1910 * Initialize it. Initialization is done twice in many 1911 * cases: to preempt sleeping callin opens if we are 1912 * callout, and to complete a callin open after DCD rises. 1913 */ 1914 tp->t_oproc = comstart; 1915 tp->t_param = comparam; 1916 tp->t_stop = comstop; 1917 tp->t_dev = dev; 1918 tp->t_termios = mynor & CALLOUT_MASK 1919 ? com->it_out : com->it_in; 1920#ifdef PC98 1921 if (!IS_8251(com->pc98_if_type)) 1922#endif 1923 (void)commctl(com, TIOCM_DTR | TIOCM_RTS, DMSET); 1924 com->poll = com->no_irq; 1925 com->poll_output = com->loses_outints; 1926 ++com->wopeners; 1927 error = comparam(tp, &tp->t_termios); 1928 --com->wopeners; 1929 if (error != 0) 1930 goto out; 1931#ifdef PC98 1932 if (IS_8251(com->pc98_if_type)) { 1933 com_tiocm_bis(com, TIOCM_DTR|TIOCM_RTS); 1934 pc98_msrint_start(dev); 1935 if (com->pc98_8251fifo) { 1936 com->pc98_8251fifo_enable = 1; 1937 outb(I8251F_fcr, CTRL8251F_ENABLE | 1938 CTRL8251F_XMT_RST | CTRL8251F_RCV_RST); 1939 } 1940 } 1941#endif 1942 /* 1943 * XXX we should goto open_top if comparam() slept. 1944 */ 1945 if (com->hasfifo) { 1946 int i; 1947 /* 1948 * (Re)enable and drain fifos. 1949 * 1950 * Certain SMC chips cause problems if the fifos 1951 * are enabled while input is ready. Turn off the 1952 * fifo if necessary to clear the input. We test 1953 * the input ready bit after enabling the fifos 1954 * since we've already enabled them in comparam() 1955 * and to handle races between enabling and fresh 1956 * input. 1957 */ 1958 for (i = 0; i < 500; i++) { 1959 sio_setreg(com, com_fifo, 1960 FIFO_RCV_RST | FIFO_XMT_RST 1961 | com->fifo_image); 1962#ifdef PC98 1963 if (com->pc98_if_type == COM_IF_RSA98III) 1964 outb(com->rsabase + rsa_frr , 0x00); 1965#endif 1966 /* 1967 * XXX the delays are for superstitious 1968 * historical reasons. It must be less than 1969 * the character time at the maximum 1970 * supported speed (87 usec at 115200 bps 1971 * 8N1). Otherwise we might loop endlessly 1972 * if data is streaming in. We used to use 1973 * delays of 100. That usually worked 1974 * because DELAY(100) used to usually delay 1975 * for about 85 usec instead of 100. 1976 */ 1977 DELAY(50); 1978#ifdef PC98 1979 if (com->pc98_if_type == COM_IF_RSA98III ? 1980 !(inb(com->rsabase + rsa_srr) & 0x08) : 1981 !(inb(com->line_status_port) & LSR_RXRDY)) 1982 break; 1983#else 1984 if (!(inb(com->line_status_port) & LSR_RXRDY)) 1985 break; 1986#endif 1987 sio_setreg(com, com_fifo, 0); 1988 DELAY(50); 1989 (void) inb(com->data_port); 1990 } 1991 if (i == 500) { 1992 error = EIO; 1993 goto out; 1994 } 1995 } 1996 1997 mtx_lock_spin(&sio_lock); 1998#ifdef PC98 1999 if (IS_8251(com->pc98_if_type)) { 2000 com_tiocm_bis(com, TIOCM_LE); 2001 com->pc98_prev_modem_status = pc98_get_modem_status(com); 2002 com_int_Rx_enable(com); 2003 } else { 2004#endif 2005 (void) inb(com->line_status_port); 2006 (void) inb(com->data_port); 2007 com->prev_modem_status = com->last_modem_status 2008 = inb(com->modem_status_port); 2009 if (COM_IIR_TXRDYBUG(com->flags)) { 2010 outb(com->intr_ctl_port, IER_ERXRDY | IER_ERLS 2011 | IER_EMSC); 2012 } else { 2013 outb(com->intr_ctl_port, IER_ERXRDY | IER_ETXRDY 2014 | IER_ERLS | IER_EMSC); 2015 } 2016#ifdef PC98 2017 if (com->pc98_if_type == COM_IF_RSA98III) { 2018 outb(com->rsabase + rsa_ier, 0x1d); 2019 outb(com->intr_ctl_port, IER_ERLS | IER_EMSC); 2020 } 2021#endif 2022#ifdef PC98 2023 } 2024#endif 2025 mtx_unlock_spin(&sio_lock); 2026 /* 2027 * Handle initial DCD. Callout devices get a fake initial 2028 * DCD (trapdoor DCD). If we are callout, then any sleeping 2029 * callin opens get woken up and resume sleeping on "siobi" 2030 * instead of "siodcd". 2031 */ 2032 /* 2033 * XXX `mynor & CALLOUT_MASK' should be 2034 * `tp->t_cflag & (SOFT_CARRIER | TRAPDOOR_CARRIER) where 2035 * TRAPDOOR_CARRIER is the default initial state for callout 2036 * devices and SOFT_CARRIER is like CLOCAL except it hides 2037 * the true carrier. 2038 */ 2039#ifdef PC98 2040 if ((IS_8251(com->pc98_if_type) && 2041 (pc98_get_modem_status(com) & TIOCM_CAR)) || 2042 (!IS_8251(com->pc98_if_type) && 2043 (com->prev_modem_status & MSR_DCD)) || 2044 mynor & CALLOUT_MASK) 2045 (*linesw[tp->t_line].l_modem)(tp, 1); 2046#else 2047 if (com->prev_modem_status & MSR_DCD || mynor & CALLOUT_MASK) 2048 (*linesw[tp->t_line].l_modem)(tp, 1); 2049#endif 2050 } 2051 /* 2052 * Wait for DCD if necessary. 2053 */ 2054 if (!(tp->t_state & TS_CARR_ON) && !(mynor & CALLOUT_MASK) 2055 && !(tp->t_cflag & CLOCAL) && !(flag & O_NONBLOCK)) { 2056 ++com->wopeners; 2057 error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH, "siodcd", 0); 2058 if (com_addr(unit) == NULL) 2059 return (ENXIO); 2060 --com->wopeners; 2061 if (error != 0 || com->gone) 2062 goto out; 2063 goto open_top; 2064 } 2065 error = (*linesw[tp->t_line].l_open)(dev, tp); 2066 disc_optim(tp, &tp->t_termios, com); 2067 if (tp->t_state & TS_ISOPEN && mynor & CALLOUT_MASK) 2068 com->active_out = TRUE; 2069 siosettimeout(); 2070out: 2071 splx(s); 2072 if (!(tp->t_state & TS_ISOPEN) && com->wopeners == 0) 2073 comhardclose(com); 2074 return (error); 2075} 2076 2077static int 2078sioclose(dev, flag, mode, td) 2079 dev_t dev; 2080 int flag; 2081 int mode; 2082 struct thread *td; 2083{ 2084 struct com_s *com; 2085 int mynor; 2086 int s; 2087 struct tty *tp; 2088 2089 mynor = minor(dev); 2090 if (mynor & CONTROL_MASK) 2091 return (0); 2092 com = com_addr(MINOR_TO_UNIT(mynor)); 2093 if (com == NULL) 2094 return (ENODEV); 2095 tp = com->tp; 2096 s = spltty(); 2097 (*linesw[tp->t_line].l_close)(tp, flag); 2098#ifdef PC98 2099 com->modem_checking = 0; 2100#endif 2101 disc_optim(tp, &tp->t_termios, com); 2102 comstop(tp, FREAD | FWRITE); 2103 comhardclose(com); 2104 ttyclose(tp); 2105 siosettimeout(); 2106 splx(s); 2107 if (com->gone) { 2108 printf("sio%d: gone\n", com->unit); 2109 s = spltty(); 2110 if (com->ibuf != NULL) 2111 free(com->ibuf, M_DEVBUF); 2112 bzero(tp, sizeof *tp); 2113 splx(s); 2114 } 2115 return (0); 2116} 2117 2118static void 2119comhardclose(com) 2120 struct com_s *com; 2121{ 2122 int s; 2123 struct tty *tp; 2124 int unit; 2125 2126 unit = com->unit; 2127 s = spltty(); 2128 com->poll = FALSE; 2129 com->poll_output = FALSE; 2130 com->do_timestamp = FALSE; 2131 com->do_dcd_timestamp = FALSE; 2132 com->pps.ppsparam.mode = 0; 2133#ifdef PC98 2134 if (IS_8251(com->pc98_if_type)) 2135 com_send_break_off(com); 2136 else 2137#endif 2138 sio_setreg(com, com_cfcr, com->cfcr_image &= ~CFCR_SBREAK); 2139 tp = com->tp; 2140 2141#if defined(DDB) && (defined(BREAK_TO_DEBUGGER) || \ 2142 defined(ALT_BREAK_TO_DEBUGGER)) 2143 /* 2144 * Leave interrupts enabled and don't clear DTR if this is the 2145 * console. This allows us to detect break-to-debugger events 2146 * while the console device is closed. 2147 */ 2148 if (com->unit != comconsole) 2149#endif 2150 { 2151#ifdef PC98 2152 int tmp; 2153 if (IS_8251(com->pc98_if_type)) 2154 com_int_TxRx_disable(com); 2155 else 2156 sio_setreg(com, com_ier, 0); 2157 if (com->pc98_if_type == COM_IF_RSA98III) 2158 outb(com->rsabase + rsa_ier, 0x00); 2159 if (IS_8251(com->pc98_if_type)) 2160 tmp = pc98_get_modem_status(com) & TIOCM_CAR; 2161 else 2162 tmp = com->prev_modem_status & MSR_DCD; 2163#else 2164 sio_setreg(com, com_ier, 0); 2165#endif 2166 if (tp->t_cflag & HUPCL 2167 /* 2168 * XXX we will miss any carrier drop between here and the 2169 * next open. Perhaps we should watch DCD even when the 2170 * port is closed; it is not sufficient to check it at 2171 * the next open because it might go up and down while 2172 * we're not watching. 2173 */ 2174 || (!com->active_out 2175#ifdef PC98 2176 && !(tmp) 2177#else 2178 && !(com->prev_modem_status & MSR_DCD) 2179#endif 2180 && !(com->it_in.c_cflag & CLOCAL)) 2181 || !(tp->t_state & TS_ISOPEN)) { 2182#ifdef PC98 2183 if (IS_8251(com->pc98_if_type)) 2184 com_tiocm_bic(com, TIOCM_DTR|TIOCM_RTS|TIOCM_LE); 2185 else 2186#endif 2187 (void)commctl(com, TIOCM_DTR, DMBIC); 2188 if (com->dtr_wait != 0 && !(com->state & CS_DTR_OFF)) { 2189 timeout(siodtrwakeup, com, com->dtr_wait); 2190 com->state |= CS_DTR_OFF; 2191 } 2192 } 2193#ifdef PC98 2194 else { 2195 if (IS_8251(com->pc98_if_type)) 2196 com_tiocm_bic(com, TIOCM_LE); 2197 } 2198#endif 2199 } 2200#ifdef PC98 2201 if (com->pc98_8251fifo) { 2202 if (com->pc98_8251fifo_enable) 2203 outb(I8251F_fcr, CTRL8251F_XMT_RST | CTRL8251F_RCV_RST); 2204 com->pc98_8251fifo_enable = 0; 2205 } 2206#endif 2207 if (com->hasfifo) { 2208 /* 2209 * Disable fifos so that they are off after controlled 2210 * reboots. Some BIOSes fail to detect 16550s when the 2211 * fifos are enabled. 2212 */ 2213 sio_setreg(com, com_fifo, 0); 2214 } 2215 com->active_out = FALSE; 2216 wakeup(&com->active_out); 2217 wakeup(TSA_CARR_ON(tp)); /* restart any wopeners */ 2218 splx(s); 2219} 2220 2221static int 2222sioread(dev, uio, flag) 2223 dev_t dev; 2224 struct uio *uio; 2225 int flag; 2226{ 2227 int mynor; 2228 struct com_s *com; 2229 2230 mynor = minor(dev); 2231 if (mynor & CONTROL_MASK) 2232 return (ENODEV); 2233 com = com_addr(MINOR_TO_UNIT(mynor)); 2234 if (com == NULL || com->gone) 2235 return (ENODEV); 2236 return ((*linesw[com->tp->t_line].l_read)(com->tp, uio, flag)); 2237} 2238 2239static int 2240siowrite(dev, uio, flag) 2241 dev_t dev; 2242 struct uio *uio; 2243 int flag; 2244{ 2245 int mynor; 2246 struct com_s *com; 2247 int unit; 2248 2249 mynor = minor(dev); 2250 if (mynor & CONTROL_MASK) 2251 return (ENODEV); 2252 2253 unit = MINOR_TO_UNIT(mynor); 2254 com = com_addr(unit); 2255 if (com == NULL || com->gone) 2256 return (ENODEV); 2257 /* 2258 * (XXX) We disallow virtual consoles if the physical console is 2259 * a serial port. This is in case there is a display attached that 2260 * is not the console. In that situation we don't need/want the X 2261 * server taking over the console. 2262 */ 2263 if (constty != NULL && unit == comconsole) 2264 constty = NULL; 2265 return ((*linesw[com->tp->t_line].l_write)(com->tp, uio, flag)); 2266} 2267 2268static void 2269siobusycheck(chan) 2270 void *chan; 2271{ 2272 struct com_s *com; 2273 int s; 2274 2275 com = (struct com_s *)chan; 2276 2277 /* 2278 * Clear TS_BUSY if low-level output is complete. 2279 * spl locking is sufficient because siointr1() does not set CS_BUSY. 2280 * If siointr1() clears CS_BUSY after we look at it, then we'll get 2281 * called again. Reading the line status port outside of siointr1() 2282 * is safe because CS_BUSY is clear so there are no output interrupts 2283 * to lose. 2284 */ 2285 s = spltty(); 2286 if (com->state & CS_BUSY) 2287 com->extra_state &= ~CSE_BUSYCHECK; /* False alarm. */ 2288#ifdef PC98 2289 else if ((IS_8251(com->pc98_if_type) && 2290 ((com->pc98_8251fifo_enable && 2291 (inb(I8251F_lsr) & (STS8251F_TxRDY | STS8251F_TxEMP)) 2292 == (STS8251F_TxRDY | STS8251F_TxEMP)) || 2293 (!com->pc98_8251fifo_enable && 2294 (inb(com->sts_port) & (STS8251_TxRDY | STS8251_TxEMP)) 2295 == (STS8251_TxRDY | STS8251_TxEMP)))) || 2296 ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY)) 2297 == (LSR_TSRE | LSR_TXRDY))) { 2298#else 2299 else if ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY)) 2300 == (LSR_TSRE | LSR_TXRDY)) { 2301#endif 2302 com->tp->t_state &= ~TS_BUSY; 2303 ttwwakeup(com->tp); 2304 com->extra_state &= ~CSE_BUSYCHECK; 2305 } else 2306 timeout(siobusycheck, com, hz / 100); 2307 splx(s); 2308} 2309 2310static u_int 2311siodivisor(rclk, speed) 2312 u_long rclk; 2313 speed_t speed; 2314{ 2315 long actual_speed; 2316 u_int divisor; 2317 int error; 2318 2319 if (speed == 0 || speed > (ULONG_MAX - 1) / 8) 2320 return (0); 2321 divisor = (rclk / (8UL * speed) + 1) / 2; 2322 if (divisor == 0 || divisor >= 65536) 2323 return (0); 2324 actual_speed = rclk / (16UL * divisor); 2325 2326 /* 10 times error in percent: */ 2327 error = ((actual_speed - (long)speed) * 2000 / (long)speed + 1) / 2; 2328 2329 /* 3.0% maximum error tolerance: */ 2330 if (error < -30 || error > 30) 2331 return (0); 2332 2333 return (divisor); 2334} 2335 2336static void 2337siodtrwakeup(chan) 2338 void *chan; 2339{ 2340 struct com_s *com; 2341 2342 com = (struct com_s *)chan; 2343 com->state &= ~CS_DTR_OFF; 2344 wakeup(&com->dtr_wait); 2345} 2346 2347/* 2348 * Call this function with the sio_lock mutex held. It will return with the 2349 * lock still held. 2350 */ 2351static void 2352sioinput(com) 2353 struct com_s *com; 2354{ 2355 u_char *buf; 2356 int incc; 2357 u_char line_status; 2358 int recv_data; 2359 struct tty *tp; 2360 2361 buf = com->ibuf; 2362 tp = com->tp; 2363 if (!(tp->t_state & TS_ISOPEN) || !(tp->t_cflag & CREAD)) { 2364 com_events -= (com->iptr - com->ibuf); 2365 com->iptr = com->ibuf; 2366 return; 2367 } 2368 if (tp->t_state & TS_CAN_BYPASS_L_RINT) { 2369 /* 2370 * Avoid the grotesquely inefficient lineswitch routine 2371 * (ttyinput) in "raw" mode. It usually takes about 450 2372 * instructions (that's without canonical processing or echo!). 2373 * slinput is reasonably fast (usually 40 instructions plus 2374 * call overhead). 2375 */ 2376 do { 2377 /* 2378 * This may look odd, but it is using save-and-enable 2379 * semantics instead of the save-and-disable semantics 2380 * that are used everywhere else. 2381 */ 2382 mtx_unlock_spin(&sio_lock); 2383 incc = com->iptr - buf; 2384 if (tp->t_rawq.c_cc + incc > tp->t_ihiwat 2385 && (com->state & CS_RTS_IFLOW 2386 || tp->t_iflag & IXOFF) 2387 && !(tp->t_state & TS_TBLOCK)) 2388 ttyblock(tp); 2389 com->delta_error_counts[CE_TTY_BUF_OVERFLOW] 2390 += b_to_q((char *)buf, incc, &tp->t_rawq); 2391 buf += incc; 2392 tk_nin += incc; 2393 tk_rawcc += incc; 2394 tp->t_rawcc += incc; 2395 ttwakeup(tp); 2396 if (tp->t_state & TS_TTSTOP 2397 && (tp->t_iflag & IXANY 2398 || tp->t_cc[VSTART] == tp->t_cc[VSTOP])) { 2399 tp->t_state &= ~TS_TTSTOP; 2400 tp->t_lflag &= ~FLUSHO; 2401 comstart(tp); 2402 } 2403 mtx_lock_spin(&sio_lock); 2404 } while (buf < com->iptr); 2405 } else { 2406 do { 2407 /* 2408 * This may look odd, but it is using save-and-enable 2409 * semantics instead of the save-and-disable semantics 2410 * that are used everywhere else. 2411 */ 2412 mtx_unlock_spin(&sio_lock); 2413 line_status = buf[com->ierroff]; 2414 recv_data = *buf++; 2415 if (line_status 2416 & (LSR_BI | LSR_FE | LSR_OE | LSR_PE)) { 2417 if (line_status & LSR_BI) 2418 recv_data |= TTY_BI; 2419 if (line_status & LSR_FE) 2420 recv_data |= TTY_FE; 2421 if (line_status & LSR_OE) 2422 recv_data |= TTY_OE; 2423 if (line_status & LSR_PE) 2424 recv_data |= TTY_PE; 2425 } 2426 (*linesw[tp->t_line].l_rint)(recv_data, tp); 2427 mtx_lock_spin(&sio_lock); 2428 } while (buf < com->iptr); 2429 } 2430 com_events -= (com->iptr - com->ibuf); 2431 com->iptr = com->ibuf; 2432 2433 /* 2434 * There is now room for another low-level buffer full of input, 2435 * so enable RTS if it is now disabled and there is room in the 2436 * high-level buffer. 2437 */ 2438#ifdef PC98 2439 if (IS_8251(com->pc98_if_type)) { 2440 if ((com->state & CS_RTS_IFLOW) && 2441 !(com_tiocm_get(com) & TIOCM_RTS) && 2442 !(tp->t_state & TS_TBLOCK)) 2443 com_tiocm_bis(com, TIOCM_RTS); 2444 } else { 2445 if ((com->state & CS_RTS_IFLOW) && 2446 !(com->mcr_image & MCR_RTS) && 2447 !(tp->t_state & TS_TBLOCK)) 2448 outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS); 2449 } 2450#else 2451 if ((com->state & CS_RTS_IFLOW) && !(com->mcr_image & MCR_RTS) && 2452 !(tp->t_state & TS_TBLOCK)) 2453 outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS); 2454#endif 2455} 2456 2457static void 2458siointr(arg) 2459 void *arg; 2460{ 2461 struct com_s *com; 2462#if defined(PC98) && defined(COM_MULTIPORT) 2463 u_char rsa_buf_status; 2464#endif 2465 2466#ifndef COM_MULTIPORT 2467 com = (struct com_s *)arg; 2468 2469 mtx_lock_spin(&sio_lock); 2470 siointr1(com); 2471 mtx_unlock_spin(&sio_lock); 2472#else /* COM_MULTIPORT */ 2473 bool_t possibly_more_intrs; 2474 int unit; 2475 2476 /* 2477 * Loop until there is no activity on any port. This is necessary 2478 * to get an interrupt edge more than to avoid another interrupt. 2479 * If the IRQ signal is just an OR of the IRQ signals from several 2480 * devices, then the edge from one may be lost because another is 2481 * on. 2482 */ 2483 mtx_lock_spin(&sio_lock); 2484 do { 2485 possibly_more_intrs = FALSE; 2486 for (unit = 0; unit < sio_numunits; ++unit) { 2487 com = com_addr(unit); 2488 /* 2489 * XXX COM_LOCK(); 2490 * would it work here, or be counter-productive? 2491 */ 2492#ifdef PC98 2493 if (com != NULL 2494 && !com->gone 2495 && IS_8251(com->pc98_if_type)) { 2496 siointr1(com); 2497 } else if (com != NULL 2498 && !com->gone 2499 && com->pc98_if_type == COM_IF_RSA98III) { 2500 rsa_buf_status = 2501 inb(com->rsabase + rsa_srr) & 0xc9; 2502 if ((rsa_buf_status & 0xc8) 2503 || !(rsa_buf_status & 0x01)) { 2504 siointr1(com); 2505 if (rsa_buf_status != 2506 (inb(com->rsabase + rsa_srr) & 0xc9)) 2507 possibly_more_intrs = TRUE; 2508 } 2509 } else 2510#endif 2511 if (com != NULL 2512 && !com->gone 2513 && (inb(com->int_id_port) & IIR_IMASK) 2514 != IIR_NOPEND) { 2515 siointr1(com); 2516 possibly_more_intrs = TRUE; 2517 } 2518 /* XXX COM_UNLOCK(); */ 2519 } 2520 } while (possibly_more_intrs); 2521 mtx_unlock_spin(&sio_lock); 2522#endif /* COM_MULTIPORT */ 2523} 2524 2525static struct timespec siots[8192]; 2526static int siotso; 2527static int volatile siotsunit = -1; 2528 2529static int 2530sysctl_siots(SYSCTL_HANDLER_ARGS) 2531{ 2532 char buf[128]; 2533 long long delta; 2534 size_t len; 2535 int error, i; 2536 2537 for (i = 1; i < siotso; i++) { 2538 delta = (long long)(siots[i].tv_sec - siots[i - 1].tv_sec) * 2539 1000000000 + 2540 (siots[i].tv_nsec - siots[i - 1].tv_nsec); 2541 len = sprintf(buf, "%lld\n", delta); 2542 if (delta >= 110000) 2543 len += sprintf(buf + len - 1, ": *** %ld.%09ld\n", 2544 (long)siots[i].tv_sec, siots[i].tv_nsec); 2545 if (i == siotso - 1) 2546 buf[len - 1] = '\0'; 2547 error = SYSCTL_OUT(req, buf, len); 2548 if (error != 0) 2549 return (error); 2550 uio_yield(); 2551 } 2552 return (0); 2553} 2554 2555SYSCTL_PROC(_machdep, OID_AUTO, siots, CTLTYPE_STRING | CTLFLAG_RD, 2556 0, 0, sysctl_siots, "A", "sio timestamps"); 2557 2558static void 2559siointr1(com) 2560 struct com_s *com; 2561{ 2562 u_char line_status; 2563 u_char modem_status; 2564 u_char *ioptr; 2565 u_char recv_data; 2566 u_char int_ctl; 2567 u_char int_ctl_new; 2568 2569#ifdef PC98 2570 u_char tmp = 0; 2571 u_char rsa_buf_status = 0; 2572 int rsa_tx_fifo_size = 0; 2573#endif /* PC98 */ 2574 2575 int_ctl = inb(com->intr_ctl_port); 2576 int_ctl_new = int_ctl; 2577 2578 while (!com->gone) { 2579#ifdef PC98 2580status_read:; 2581 if (IS_8251(com->pc98_if_type)) { 2582 if (com->pc98_8251fifo_enable) 2583 tmp = inb(I8251F_lsr); 2584 else 2585 tmp = inb(com->sts_port); 2586more_intr: 2587 line_status = 0; 2588 if (com->pc98_8251fifo_enable) { 2589 if (tmp & STS8251F_TxRDY) line_status |= LSR_TXRDY; 2590 if (tmp & STS8251F_RxRDY) line_status |= LSR_RXRDY; 2591 if (tmp & STS8251F_TxEMP) line_status |= LSR_TSRE; 2592 if (tmp & STS8251F_PE) line_status |= LSR_PE; 2593 if (tmp & STS8251F_OE) line_status |= LSR_OE; 2594 if (tmp & STS8251F_BD_SD) line_status |= LSR_BI; 2595 } else { 2596 if (tmp & STS8251_TxRDY) line_status |= LSR_TXRDY; 2597 if (tmp & STS8251_RxRDY) line_status |= LSR_RXRDY; 2598 if (tmp & STS8251_TxEMP) line_status |= LSR_TSRE; 2599 if (tmp & STS8251_PE) line_status |= LSR_PE; 2600 if (tmp & STS8251_OE) line_status |= LSR_OE; 2601 if (tmp & STS8251_FE) line_status |= LSR_FE; 2602 if (tmp & STS8251_BD_SD) line_status |= LSR_BI; 2603 } 2604 } else { 2605#endif /* PC98 */ 2606 if (com->pps.ppsparam.mode & PPS_CAPTUREBOTH) { 2607 modem_status = inb(com->modem_status_port); 2608 if ((modem_status ^ com->last_modem_status) & MSR_DCD) { 2609 pps_capture(&com->pps); 2610 pps_event(&com->pps, (modem_status & MSR_DCD) ? 2611 PPS_CAPTUREASSERT : PPS_CAPTURECLEAR); 2612 } 2613 } 2614 line_status = inb(com->line_status_port); 2615#ifdef PC98 2616 } 2617 if (com->pc98_if_type == COM_IF_RSA98III) 2618 rsa_buf_status = inb(com->rsabase + rsa_srr); 2619#endif /* PC98 */ 2620 2621 /* input event? (check first to help avoid overruns) */ 2622#ifndef PC98 2623 while (line_status & LSR_RCV_MASK) { 2624#else 2625 while ((line_status & LSR_RCV_MASK) 2626 || (com->pc98_if_type == COM_IF_RSA98III 2627 && (rsa_buf_status & 0x08))) { 2628#endif /* PC98 */ 2629 /* break/unnattached error bits or real input? */ 2630#ifdef PC98 2631 if (IS_8251(com->pc98_if_type)) { 2632 if (com->pc98_8251fifo_enable) { 2633 recv_data = inb(I8251F_data); 2634 if (tmp & (STS8251F_PE | STS8251F_OE | 2635 STS8251F_BD_SD)) { 2636 pc98_i8251_or_cmd(com, CMD8251_ER); 2637 recv_data = 0; 2638 } 2639 } else { 2640 recv_data = inb(com->data_port); 2641 if (tmp & (STS8251_PE | STS8251_OE | 2642 STS8251_FE | STS8251_BD_SD)) { 2643 pc98_i8251_or_cmd(com, CMD8251_ER); 2644 recv_data = 0; 2645 } 2646 } 2647 } else if (com->pc98_if_type == COM_IF_RSA98III) { 2648 if (!(rsa_buf_status & 0x08)) 2649 recv_data = 0; 2650 else 2651 recv_data = inb(com->data_port); 2652 } else 2653#endif 2654 if (!(line_status & LSR_RXRDY)) 2655 recv_data = 0; 2656 else 2657 recv_data = inb(com->data_port); 2658#if defined(DDB) && defined(ALT_BREAK_TO_DEBUGGER) 2659 /* 2660 * Solaris implements a new BREAK which is initiated 2661 * by a character sequence CR ~ ^b which is similar 2662 * to a familiar pattern used on Sun servers by the 2663 * Remote Console. 2664 */ 2665#define KEY_CRTLB 2 /* ^B */ 2666#define KEY_CR 13 /* CR '\r' */ 2667#define KEY_TILDE 126 /* ~ */ 2668 2669 if (com->unit == comconsole) { 2670 static int brk_state1 = 0, brk_state2 = 0; 2671 if (recv_data == KEY_CR) { 2672 brk_state1 = recv_data; 2673 brk_state2 = 0; 2674 } else if (brk_state1 == KEY_CR && (recv_data == KEY_TILDE || recv_data == KEY_CRTLB)) { 2675 if (recv_data == KEY_TILDE) 2676 brk_state2 = recv_data; 2677 else if (brk_state2 == KEY_TILDE && recv_data == KEY_CRTLB) { 2678 breakpoint(); 2679 brk_state1 = brk_state2 = 0; 2680 goto cont; 2681 } else 2682 brk_state2 = 0; 2683 } else 2684 brk_state1 = 0; 2685 } 2686#endif 2687 if (line_status & (LSR_BI | LSR_FE | LSR_PE)) { 2688 /* 2689 * Don't store BI if IGNBRK or FE/PE if IGNPAR. 2690 * Otherwise, push the work to a higher level 2691 * (to handle PARMRK) if we're bypassing. 2692 * Otherwise, convert BI/FE and PE+INPCK to 0. 2693 * 2694 * This makes bypassing work right in the 2695 * usual "raw" case (IGNBRK set, and IGNPAR 2696 * and INPCK clear). 2697 * 2698 * Note: BI together with FE/PE means just BI. 2699 */ 2700 if (line_status & LSR_BI) { 2701#if defined(DDB) && defined(BREAK_TO_DEBUGGER) 2702 if (com->unit == comconsole) { 2703 breakpoint(); 2704 goto cont; 2705 } 2706#endif 2707 if (com->tp == NULL 2708 || com->tp->t_iflag & IGNBRK) 2709 goto cont; 2710 } else { 2711 if (com->tp == NULL 2712 || com->tp->t_iflag & IGNPAR) 2713 goto cont; 2714 } 2715 if (com->tp->t_state & TS_CAN_BYPASS_L_RINT 2716 && (line_status & (LSR_BI | LSR_FE) 2717 || com->tp->t_iflag & INPCK)) 2718 recv_data = 0; 2719 } 2720 ++com->bytes_in; 2721 if (com->hotchar != 0 && recv_data == com->hotchar) 2722 swi_sched(sio_fast_ih, 0); 2723 ioptr = com->iptr; 2724 if (ioptr >= com->ibufend) 2725 CE_RECORD(com, CE_INTERRUPT_BUF_OVERFLOW); 2726 else { 2727 if (com->do_timestamp) 2728 microtime(&com->timestamp); 2729 ++com_events; 2730 swi_sched(sio_slow_ih, SWI_DELAY); 2731#if 0 /* for testing input latency vs efficiency */ 2732if (com->iptr - com->ibuf == 8) 2733 swi_sched(sio_fast_ih, 0); 2734#endif 2735 ioptr[0] = recv_data; 2736 ioptr[com->ierroff] = line_status; 2737 com->iptr = ++ioptr; 2738 if (ioptr == com->ihighwater 2739 && com->state & CS_RTS_IFLOW) 2740#ifdef PC98 2741 IS_8251(com->pc98_if_type) ? 2742 com_tiocm_bic(com, TIOCM_RTS) : 2743#endif 2744 outb(com->modem_ctl_port, 2745 com->mcr_image &= ~MCR_RTS); 2746 if (line_status & LSR_OE) 2747 CE_RECORD(com, CE_OVERRUN); 2748 } 2749cont: 2750 /* 2751 * "& 0x7F" is to avoid the gcc-1.40 generating a slow 2752 * jump from the top of the loop to here 2753 */ 2754#ifdef PC98 2755 if (IS_8251(com->pc98_if_type)) 2756 goto status_read; 2757 else 2758#endif 2759 line_status = inb(com->line_status_port) & 0x7F; 2760#ifdef PC98 2761 if (com->pc98_if_type == COM_IF_RSA98III) 2762 rsa_buf_status = inb(com->rsabase + rsa_srr); 2763#endif /* PC98 */ 2764 } 2765 2766 /* modem status change? (always check before doing output) */ 2767#ifdef PC98 2768 if (!IS_8251(com->pc98_if_type)) { 2769#endif 2770 modem_status = inb(com->modem_status_port); 2771 if (modem_status != com->last_modem_status) { 2772 if (com->do_dcd_timestamp 2773 && !(com->last_modem_status & MSR_DCD) 2774 && modem_status & MSR_DCD) 2775 microtime(&com->dcd_timestamp); 2776 2777 /* 2778 * Schedule high level to handle DCD changes. Note 2779 * that we don't use the delta bits anywhere. Some 2780 * UARTs mess them up, and it's easy to remember the 2781 * previous bits and calculate the delta. 2782 */ 2783 com->last_modem_status = modem_status; 2784 if (!(com->state & CS_CHECKMSR)) { 2785 com_events += LOTS_OF_EVENTS; 2786 com->state |= CS_CHECKMSR; 2787 swi_sched(sio_fast_ih, 0); 2788 } 2789 2790 /* handle CTS change immediately for crisp flow ctl */ 2791 if (com->state & CS_CTS_OFLOW) { 2792 if (modem_status & MSR_CTS) 2793 com->state |= CS_ODEVREADY; 2794 else 2795 com->state &= ~CS_ODEVREADY; 2796 } 2797 } 2798#ifdef PC98 2799 } 2800#endif 2801 2802 /* output queued and everything ready? */ 2803#ifndef PC98 2804 if (line_status & LSR_TXRDY 2805 && com->state >= (CS_BUSY | CS_TTGO | CS_ODEVREADY)) { 2806#else 2807 if (((com->pc98_if_type == COM_IF_RSA98III) 2808 ? (rsa_buf_status & 0x02) 2809 : (line_status & LSR_TXRDY)) 2810 && com->state >= (CS_BUSY | CS_TTGO | CS_ODEVREADY)) { 2811#endif 2812#ifdef PC98 2813 Port_t tmp_data_port; 2814 2815 if (IS_8251(com->pc98_if_type) && 2816 com->pc98_8251fifo_enable) 2817 tmp_data_port = I8251F_data; 2818 else 2819 tmp_data_port = com->data_port; 2820#endif 2821 2822 ioptr = com->obufq.l_head; 2823 if (com->tx_fifo_size > 1 && com->unit != siotsunit) { 2824 u_int ocount; 2825 2826 ocount = com->obufq.l_tail - ioptr; 2827#ifdef PC98 2828 if (com->pc98_if_type == COM_IF_RSA98III) { 2829 rsa_buf_status = inb(com->rsabase + rsa_srr); 2830 rsa_tx_fifo_size = 1024; 2831 if (!(rsa_buf_status & 0x01)) 2832 rsa_tx_fifo_size = 2048; 2833 if (ocount > rsa_tx_fifo_size) 2834 ocount = rsa_tx_fifo_size; 2835 } else 2836#endif 2837 if (ocount > com->tx_fifo_size) 2838 ocount = com->tx_fifo_size; 2839 com->bytes_out += ocount; 2840 do 2841#ifdef PC98 2842 outb(tmp_data_port, *ioptr++); 2843#else 2844 outb(com->data_port, *ioptr++); 2845#endif 2846 while (--ocount != 0); 2847 } else { 2848#ifdef PC98 2849 outb(tmp_data_port, *ioptr++); 2850#else 2851 outb(com->data_port, *ioptr++); 2852#endif 2853 ++com->bytes_out; 2854 if (com->unit == siotsunit) { 2855 nanouptime(&siots[siotso]); 2856 siotso = (siotso + 1) % 2857 (sizeof siots / sizeof siots[0]); 2858 } 2859 } 2860#ifdef PC98 2861 if (IS_8251(com->pc98_if_type)) 2862 if (!(pc98_check_i8251_interrupt(com) & IEN_TxFLAG)) 2863 com_int_Tx_enable(com); 2864#endif 2865 com->obufq.l_head = ioptr; 2866 if (COM_IIR_TXRDYBUG(com->flags)) { 2867 int_ctl_new = int_ctl | IER_ETXRDY; 2868 } 2869 if (ioptr >= com->obufq.l_tail) { 2870 struct lbq *qp; 2871 2872 qp = com->obufq.l_next; 2873 qp->l_queued = FALSE; 2874 qp = qp->l_next; 2875 if (qp != NULL) { 2876 com->obufq.l_head = qp->l_head; 2877 com->obufq.l_tail = qp->l_tail; 2878 com->obufq.l_next = qp; 2879 } else { 2880 /* output just completed */ 2881 if (COM_IIR_TXRDYBUG(com->flags)) { 2882 int_ctl_new = int_ctl & ~IER_ETXRDY; 2883 } 2884 com->state &= ~CS_BUSY; 2885#if defined(PC98) 2886 if (IS_8251(com->pc98_if_type) && 2887 pc98_check_i8251_interrupt(com) & IEN_TxFLAG) 2888 com_int_Tx_disable(com); 2889#endif 2890 } 2891 if (!(com->state & CS_ODONE)) { 2892 com_events += LOTS_OF_EVENTS; 2893 com->state |= CS_ODONE; 2894 /* handle at high level ASAP */ 2895 swi_sched(sio_fast_ih, 0); 2896 } 2897 } 2898 if (COM_IIR_TXRDYBUG(com->flags) && (int_ctl != int_ctl_new)) { 2899#ifdef PC98 2900 if (com->pc98_if_type == COM_IF_RSA98III) { 2901 int_ctl_new &= ~(IER_ETXRDY | IER_ERXRDY); 2902 outb(com->intr_ctl_port, int_ctl_new); 2903 outb(com->rsabase + rsa_ier, 0x1d); 2904 } else 2905#endif 2906 outb(com->intr_ctl_port, int_ctl_new); 2907 } 2908 } 2909#ifdef PC98 2910 else if (line_status & LSR_TXRDY) { 2911 if (IS_8251(com->pc98_if_type)) 2912 if (pc98_check_i8251_interrupt(com) & IEN_TxFLAG) 2913 com_int_Tx_disable(com); 2914 } 2915 if (IS_8251(com->pc98_if_type)) { 2916 if (com->pc98_8251fifo_enable) { 2917 if ((tmp = inb(I8251F_lsr)) & STS8251F_RxRDY) 2918 goto more_intr; 2919 } else { 2920 if ((tmp = inb(com->sts_port)) & STS8251_RxRDY) 2921 goto more_intr; 2922 } 2923 } 2924#endif 2925 2926 /* finished? */ 2927#ifndef COM_MULTIPORT 2928#ifdef PC98 2929 if (IS_8251(com->pc98_if_type)) 2930 return; 2931#endif 2932 if ((inb(com->int_id_port) & IIR_IMASK) == IIR_NOPEND) 2933#endif /* COM_MULTIPORT */ 2934 return; 2935 } 2936} 2937 2938static int 2939sioioctl(dev, cmd, data, flag, td) 2940 dev_t dev; 2941 u_long cmd; 2942 caddr_t data; 2943 int flag; 2944 struct thread *td; 2945{ 2946 struct com_s *com; 2947 int error; 2948 int mynor; 2949 int s; 2950 struct tty *tp; 2951#if defined(COMPAT_43) || defined(COMPAT_SUNOS) 2952 u_long oldcmd; 2953 struct termios term; 2954#endif 2955 2956 mynor = minor(dev); 2957 com = com_addr(MINOR_TO_UNIT(mynor)); 2958 if (com == NULL || com->gone) 2959 return (ENODEV); 2960 if (mynor & CONTROL_MASK) { 2961 struct termios *ct; 2962 2963 switch (mynor & CONTROL_MASK) { 2964 case CONTROL_INIT_STATE: 2965 ct = mynor & CALLOUT_MASK ? &com->it_out : &com->it_in; 2966 break; 2967 case CONTROL_LOCK_STATE: 2968 ct = mynor & CALLOUT_MASK ? &com->lt_out : &com->lt_in; 2969 break; 2970 default: 2971 return (ENODEV); /* /dev/nodev */ 2972 } 2973 switch (cmd) { 2974 case TIOCSETA: 2975 error = suser(td); 2976 if (error != 0) 2977 return (error); 2978 *ct = *(struct termios *)data; 2979 return (0); 2980 case TIOCGETA: 2981 *(struct termios *)data = *ct; 2982 return (0); 2983 case TIOCGETD: 2984 *(int *)data = TTYDISC; 2985 return (0); 2986 case TIOCGWINSZ: 2987 bzero(data, sizeof(struct winsize)); 2988 return (0); 2989 default: 2990 return (ENOTTY); 2991 } 2992 } 2993 tp = com->tp; 2994#if defined(COMPAT_43) || defined(COMPAT_SUNOS) 2995 term = tp->t_termios; 2996 oldcmd = cmd; 2997 error = ttsetcompat(tp, &cmd, data, &term); 2998 if (error != 0) 2999 return (error); 3000 if (cmd != oldcmd) 3001 data = (caddr_t)&term; 3002#endif 3003 if (cmd == TIOCSETA || cmd == TIOCSETAW || cmd == TIOCSETAF) { 3004 int cc; 3005 struct termios *dt = (struct termios *)data; 3006 struct termios *lt = mynor & CALLOUT_MASK 3007 ? &com->lt_out : &com->lt_in; 3008 3009 dt->c_iflag = (tp->t_iflag & lt->c_iflag) 3010 | (dt->c_iflag & ~lt->c_iflag); 3011 dt->c_oflag = (tp->t_oflag & lt->c_oflag) 3012 | (dt->c_oflag & ~lt->c_oflag); 3013 dt->c_cflag = (tp->t_cflag & lt->c_cflag) 3014 | (dt->c_cflag & ~lt->c_cflag); 3015 dt->c_lflag = (tp->t_lflag & lt->c_lflag) 3016 | (dt->c_lflag & ~lt->c_lflag); 3017 for (cc = 0; cc < NCCS; ++cc) 3018 if (lt->c_cc[cc] != 0) 3019 dt->c_cc[cc] = tp->t_cc[cc]; 3020 if (lt->c_ispeed != 0) 3021 dt->c_ispeed = tp->t_ispeed; 3022 if (lt->c_ospeed != 0) 3023 dt->c_ospeed = tp->t_ospeed; 3024 } 3025 error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, td); 3026 if (error != ENOIOCTL) 3027 return (error); 3028 s = spltty(); 3029 error = ttioctl(tp, cmd, data, flag); 3030 disc_optim(tp, &tp->t_termios, com); 3031 if (error != ENOIOCTL) { 3032 splx(s); 3033 return (error); 3034 } 3035#ifdef PC98 3036 if (IS_8251(com->pc98_if_type)) { 3037 switch (cmd) { 3038 case TIOCSBRK: 3039 com_send_break_on(com); 3040 break; 3041 case TIOCCBRK: 3042 com_send_break_off(com); 3043 break; 3044 case TIOCSDTR: 3045 com_tiocm_bis(com, TIOCM_DTR | TIOCM_RTS); 3046 break; 3047 case TIOCCDTR: 3048 com_tiocm_bic(com, TIOCM_DTR); 3049 break; 3050 /* 3051 * XXX should disallow changing MCR_RTS if CS_RTS_IFLOW is set. The 3052 * changes get undone on the next call to comparam(). 3053 */ 3054 case TIOCMSET: 3055 com_tiocm_set(com, *(int *)data); 3056 break; 3057 case TIOCMBIS: 3058 com_tiocm_bis(com, *(int *)data); 3059 break; 3060 case TIOCMBIC: 3061 com_tiocm_bic(com, *(int *)data); 3062 break; 3063 case TIOCMGET: 3064 *(int *)data = com_tiocm_get(com); 3065 break; 3066 case TIOCMSDTRWAIT: 3067 /* must be root since the wait applies to following logins */ 3068 error = suser(td); 3069 if (error != 0) { 3070 splx(s); 3071 return (error); 3072 } 3073 com->dtr_wait = *(int *)data * hz / 100; 3074 break; 3075 case TIOCMGDTRWAIT: 3076 *(int *)data = com->dtr_wait * 100 / hz; 3077 break; 3078 case TIOCTIMESTAMP: 3079 com->do_timestamp = TRUE; 3080 *(struct timeval *)data = com->timestamp; 3081 break; 3082 case TIOCDCDTIMESTAMP: 3083 com->do_dcd_timestamp = TRUE; 3084 *(struct timeval *)data = com->dcd_timestamp; 3085 break; 3086 default: 3087 splx(s); 3088 error = pps_ioctl(cmd, data, &com->pps); 3089 if (error == ENODEV) 3090 error = ENOTTY; 3091 return (error); 3092 } 3093 } else { 3094#endif 3095 switch (cmd) { 3096 case TIOCSBRK: 3097 sio_setreg(com, com_cfcr, com->cfcr_image |= CFCR_SBREAK); 3098 break; 3099 case TIOCCBRK: 3100 sio_setreg(com, com_cfcr, com->cfcr_image &= ~CFCR_SBREAK); 3101 break; 3102 case TIOCSDTR: 3103 (void)commctl(com, TIOCM_DTR, DMBIS); 3104 break; 3105 case TIOCCDTR: 3106 (void)commctl(com, TIOCM_DTR, DMBIC); 3107 break; 3108 /* 3109 * XXX should disallow changing MCR_RTS if CS_RTS_IFLOW is set. The 3110 * changes get undone on the next call to comparam(). 3111 */ 3112 case TIOCMSET: 3113 (void)commctl(com, *(int *)data, DMSET); 3114 break; 3115 case TIOCMBIS: 3116 (void)commctl(com, *(int *)data, DMBIS); 3117 break; 3118 case TIOCMBIC: 3119 (void)commctl(com, *(int *)data, DMBIC); 3120 break; 3121 case TIOCMGET: 3122 *(int *)data = commctl(com, 0, DMGET); 3123 break; 3124 case TIOCMSDTRWAIT: 3125 /* must be root since the wait applies to following logins */ 3126 error = suser(td); 3127 if (error != 0) { 3128 splx(s); 3129 return (error); 3130 } 3131 com->dtr_wait = *(int *)data * hz / 100; 3132 break; 3133 case TIOCMGDTRWAIT: 3134 *(int *)data = com->dtr_wait * 100 / hz; 3135 break; 3136 case TIOCTIMESTAMP: 3137 com->do_timestamp = TRUE; 3138 *(struct timeval *)data = com->timestamp; 3139 break; 3140 case TIOCDCDTIMESTAMP: 3141 com->do_dcd_timestamp = TRUE; 3142 *(struct timeval *)data = com->dcd_timestamp; 3143 break; 3144 default: 3145 splx(s); 3146 error = pps_ioctl(cmd, data, &com->pps); 3147 if (error == ENODEV) 3148 error = ENOTTY; 3149 return (error); 3150 } 3151#ifdef PC98 3152 } 3153#endif 3154 splx(s); 3155 return (0); 3156} 3157 3158/* software interrupt handler for SWI_TTY */ 3159static void 3160siopoll(void *dummy) 3161{ 3162 int unit; 3163 3164 if (com_events == 0) 3165 return; 3166repeat: 3167 for (unit = 0; unit < sio_numunits; ++unit) { 3168 struct com_s *com; 3169 int incc; 3170 struct tty *tp; 3171 3172 com = com_addr(unit); 3173 if (com == NULL) 3174 continue; 3175 tp = com->tp; 3176 if (tp == NULL || com->gone) { 3177 /* 3178 * Discard any events related to never-opened or 3179 * going-away devices. 3180 */ 3181 mtx_lock_spin(&sio_lock); 3182 incc = com->iptr - com->ibuf; 3183 com->iptr = com->ibuf; 3184 if (com->state & CS_CHECKMSR) { 3185 incc += LOTS_OF_EVENTS; 3186 com->state &= ~CS_CHECKMSR; 3187 } 3188 com_events -= incc; 3189 mtx_unlock_spin(&sio_lock); 3190 continue; 3191 } 3192 if (com->iptr != com->ibuf) { 3193 mtx_lock_spin(&sio_lock); 3194 sioinput(com); 3195 mtx_unlock_spin(&sio_lock); 3196 } 3197 if (com->state & CS_CHECKMSR) { 3198 u_char delta_modem_status; 3199 3200#ifdef PC98 3201 if (!IS_8251(com->pc98_if_type)) { 3202#endif 3203 mtx_lock_spin(&sio_lock); 3204 delta_modem_status = com->last_modem_status 3205 ^ com->prev_modem_status; 3206 com->prev_modem_status = com->last_modem_status; 3207 com_events -= LOTS_OF_EVENTS; 3208 com->state &= ~CS_CHECKMSR; 3209 mtx_unlock_spin(&sio_lock); 3210 if (delta_modem_status & MSR_DCD) 3211 (*linesw[tp->t_line].l_modem) 3212 (tp, com->prev_modem_status & MSR_DCD); 3213#ifdef PC98 3214 } 3215#endif 3216 } 3217 if (com->state & CS_ODONE) { 3218 mtx_lock_spin(&sio_lock); 3219 com_events -= LOTS_OF_EVENTS; 3220 com->state &= ~CS_ODONE; 3221 mtx_unlock_spin(&sio_lock); 3222 if (!(com->state & CS_BUSY) 3223 && !(com->extra_state & CSE_BUSYCHECK)) { 3224 timeout(siobusycheck, com, hz / 100); 3225 com->extra_state |= CSE_BUSYCHECK; 3226 } 3227 (*linesw[tp->t_line].l_start)(tp); 3228 } 3229 if (com_events == 0) 3230 break; 3231 } 3232 if (com_events >= LOTS_OF_EVENTS) 3233 goto repeat; 3234} 3235 3236static int 3237comparam(tp, t) 3238 struct tty *tp; 3239 struct termios *t; 3240{ 3241 u_int cfcr; 3242 int cflag; 3243 struct com_s *com; 3244 u_int divisor; 3245 u_char dlbh; 3246 u_char dlbl; 3247 int s; 3248 int unit; 3249#ifdef PC98 3250 u_char param = 0; 3251#endif 3252 3253 unit = DEV_TO_UNIT(tp->t_dev); 3254 com = com_addr(unit); 3255 if (com == NULL) 3256 return (ENODEV); 3257 3258#ifdef PC98 3259 cfcr = 0; 3260 3261 if (IS_8251(com->pc98_if_type)) { 3262 if (pc98_ttspeedtab(com, t->c_ospeed, &divisor) != 0) 3263 return (EINVAL); 3264 } else { 3265#endif 3266 /* do historical conversions */ 3267 if (t->c_ispeed == 0) 3268 t->c_ispeed = t->c_ospeed; 3269 3270 /* check requested parameters */ 3271 if (t->c_ospeed == 0) 3272 divisor = 0; 3273 else { 3274 if (t->c_ispeed != t->c_ospeed) 3275 return (EINVAL); 3276 divisor = siodivisor(com->rclk, t->c_ispeed); 3277 if (divisor == 0) 3278 return (EINVAL); 3279 } 3280#ifdef PC98 3281 } 3282#endif 3283 3284 /* parameters are OK, convert them to the com struct and the device */ 3285 s = spltty(); 3286#ifdef PC98 3287 if (IS_8251(com->pc98_if_type)) { 3288 if (divisor == 0) 3289 com_tiocm_bic(com, TIOCM_DTR|TIOCM_RTS|TIOCM_LE); 3290 else 3291 com_tiocm_bis(com, TIOCM_DTR|TIOCM_RTS|TIOCM_LE); 3292 } else 3293#endif 3294 if (divisor == 0) 3295 (void)commctl(com, TIOCM_DTR, DMBIC); /* hang up line */ 3296 else 3297 (void)commctl(com, TIOCM_DTR, DMBIS); 3298 cflag = t->c_cflag; 3299#ifdef PC98 3300 if (!IS_8251(com->pc98_if_type)) { 3301#endif 3302 switch (cflag & CSIZE) { 3303 case CS5: 3304 cfcr = CFCR_5BITS; 3305 break; 3306 case CS6: 3307 cfcr = CFCR_6BITS; 3308 break; 3309 case CS7: 3310 cfcr = CFCR_7BITS; 3311 break; 3312 default: 3313 cfcr = CFCR_8BITS; 3314 break; 3315 } 3316 if (cflag & PARENB) { 3317 cfcr |= CFCR_PENAB; 3318 if (!(cflag & PARODD)) 3319 cfcr |= CFCR_PEVEN; 3320 } 3321 if (cflag & CSTOPB) 3322 cfcr |= CFCR_STOPB; 3323 3324 if (com->hasfifo && divisor != 0) { 3325 /* 3326 * Use a fifo trigger level low enough so that the input 3327 * latency from the fifo is less than about 16 msec and 3328 * the total latency is less than about 30 msec. These 3329 * latencies are reasonable for humans. Serial comms 3330 * protocols shouldn't expect anything better since modem 3331 * latencies are larger. 3332 * 3333 * We have to set the FIFO trigger point such that we 3334 * don't overflow it accidently if a serial interrupt 3335 * is delayed. At high speeds, FIFO_RX_HIGH does not 3336 * leave enough slots free. 3337 */ 3338 com->fifo_image = com->unit == siotsunit ? 0 3339 : t->c_ospeed <= 4800 3340 ? FIFO_ENABLE : FIFO_ENABLE | FIFO_RX_MEDH; 3341#ifdef COM_ESP 3342 /* 3343 * The Hayes ESP card needs the fifo DMA mode bit set 3344 * in compatibility mode. If not, it will interrupt 3345 * for each character received. 3346 */ 3347 if (com->esp) 3348 com->fifo_image |= FIFO_DMA_MODE; 3349#endif 3350 sio_setreg(com, com_fifo, com->fifo_image); 3351 } 3352#ifdef PC98 3353 } 3354#endif 3355 3356 /* 3357 * This returns with interrupts disabled so that we can complete 3358 * the speed change atomically. Keeping interrupts disabled is 3359 * especially important while com_data is hidden. 3360 */ 3361 (void) siosetwater(com, t->c_ispeed); 3362 3363#ifdef PC98 3364 if (IS_8251(com->pc98_if_type)) 3365 com_cflag_and_speed_set(com, cflag, t->c_ospeed); 3366 else { 3367#endif 3368 if (divisor != 0) { 3369 sio_setreg(com, com_cfcr, cfcr | CFCR_DLAB); 3370 /* 3371 * Only set the divisor registers if they would change, 3372 * since on some 16550 incompatibles (UMC8669F), setting 3373 * them while input is arriving them loses sync until 3374 * data stops arriving. 3375 */ 3376 dlbl = divisor & 0xFF; 3377 if (sio_getreg(com, com_dlbl) != dlbl) 3378 sio_setreg(com, com_dlbl, dlbl); 3379 dlbh = divisor >> 8; 3380 if (sio_getreg(com, com_dlbh) != dlbh) 3381 sio_setreg(com, com_dlbh, dlbh); 3382 } 3383 3384 sio_setreg(com, com_cfcr, com->cfcr_image = cfcr); 3385#ifdef PC98 3386 } 3387#endif 3388 3389 if (!(tp->t_state & TS_TTSTOP)) 3390 com->state |= CS_TTGO; 3391 3392 if (cflag & CRTS_IFLOW) { 3393#ifndef PC98 3394 if (com->st16650a) { 3395 sio_setreg(com, com_cfcr, 0xbf); 3396 sio_setreg(com, com_fifo, 3397 sio_getreg(com, com_fifo) | 0x40); 3398 } 3399#endif 3400 com->state |= CS_RTS_IFLOW; 3401 /* 3402 * If CS_RTS_IFLOW just changed from off to on, the change 3403 * needs to be propagated to MCR_RTS. This isn't urgent, 3404 * so do it later by calling comstart() instead of repeating 3405 * a lot of code from comstart() here. 3406 */ 3407 } else if (com->state & CS_RTS_IFLOW) { 3408 com->state &= ~CS_RTS_IFLOW; 3409 /* 3410 * CS_RTS_IFLOW just changed from on to off. Force MCR_RTS 3411 * on here, since comstart() won't do it later. 3412 */ 3413#ifdef PC98 3414 if (IS_8251(com->pc98_if_type)) 3415 com_tiocm_bis(com, TIOCM_RTS); 3416 else 3417 outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS); 3418#else 3419 outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS); 3420 if (com->st16650a) { 3421 sio_setreg(com, com_cfcr, 0xbf); 3422 sio_setreg(com, com_fifo, 3423 sio_getreg(com, com_fifo) & ~0x40); 3424 } 3425#endif 3426 } 3427 3428 3429 /* 3430 * Set up state to handle output flow control. 3431 * XXX - worth handling MDMBUF (DCD) flow control at the lowest level? 3432 * Now has 10+ msec latency, while CTS flow has 50- usec latency. 3433 */ 3434 com->state |= CS_ODEVREADY; 3435 com->state &= ~CS_CTS_OFLOW; 3436#ifdef PC98 3437 if (com->pc98_if_type == COM_IF_RSA98III) { 3438 param = inb(com->rsabase + rsa_msr); 3439 outb(com->rsabase + rsa_msr, param & 0x14); 3440 } 3441#endif 3442 if (cflag & CCTS_OFLOW) { 3443 com->state |= CS_CTS_OFLOW; 3444#ifdef PC98 3445 if (IS_8251(com->pc98_if_type)) { 3446 if (!(pc98_get_modem_status(com) & TIOCM_CTS)) 3447 com->state &= ~CS_ODEVREADY; 3448 } else { 3449 if (com->pc98_if_type == COM_IF_RSA98III) { 3450 /* Set automatic flow control mode */ 3451 outb(com->rsabase + rsa_msr, param | 0x08); 3452 } else 3453#endif 3454 if (!(com->last_modem_status & MSR_CTS)) 3455 com->state &= ~CS_ODEVREADY; 3456#ifdef PC98 3457 } 3458#else 3459 if (com->st16650a) { 3460 sio_setreg(com, com_cfcr, 0xbf); 3461 sio_setreg(com, com_fifo, 3462 sio_getreg(com, com_fifo) | 0x80); 3463 } 3464 } else { 3465 if (com->st16650a) { 3466 sio_setreg(com, com_cfcr, 0xbf); 3467 sio_setreg(com, com_fifo, 3468 sio_getreg(com, com_fifo) & ~0x80); 3469 } 3470#endif 3471 } 3472 3473#ifdef PC98 3474 if (!IS_8251(com->pc98_if_type)) 3475#endif 3476 sio_setreg(com, com_cfcr, com->cfcr_image); 3477 3478 /* XXX shouldn't call functions while intrs are disabled. */ 3479 disc_optim(tp, t, com); 3480 /* 3481 * Recover from fiddling with CS_TTGO. We used to call siointr1() 3482 * unconditionally, but that defeated the careful discarding of 3483 * stale input in sioopen(). 3484 */ 3485 if (com->state >= (CS_BUSY | CS_TTGO)) 3486 siointr1(com); 3487 3488 mtx_unlock_spin(&sio_lock); 3489 splx(s); 3490 comstart(tp); 3491 if (com->ibufold != NULL) { 3492 free(com->ibufold, M_DEVBUF); 3493 com->ibufold = NULL; 3494 } 3495 return (0); 3496} 3497 3498/* 3499 * This function must be called with the sio_lock mutex released and will 3500 * return with it obtained. 3501 */ 3502static int 3503siosetwater(com, speed) 3504 struct com_s *com; 3505 speed_t speed; 3506{ 3507 int cp4ticks; 3508 u_char *ibuf; 3509 int ibufsize; 3510 struct tty *tp; 3511 3512 /* 3513 * Make the buffer size large enough to handle a softtty interrupt 3514 * latency of about 2 ticks without loss of throughput or data 3515 * (about 3 ticks if input flow control is not used or not honoured, 3516 * but a bit less for CS5-CS7 modes). 3517 */ 3518 cp4ticks = speed / 10 / hz * 4; 3519 for (ibufsize = 128; ibufsize < cp4ticks;) 3520 ibufsize <<= 1; 3521#ifdef PC98 3522 if (com->pc98_if_type == COM_IF_RSA98III) 3523 ibufsize = 2048; 3524#endif 3525 if (ibufsize == com->ibufsize) { 3526 mtx_lock_spin(&sio_lock); 3527 return (0); 3528 } 3529 3530 /* 3531 * Allocate input buffer. The extra factor of 2 in the size is 3532 * to allow for an error byte for each input byte. 3533 */ 3534 ibuf = malloc(2 * ibufsize, M_DEVBUF, M_NOWAIT); 3535 if (ibuf == NULL) { 3536 mtx_lock_spin(&sio_lock); 3537 return (ENOMEM); 3538 } 3539 3540 /* Initialize non-critical variables. */ 3541 com->ibufold = com->ibuf; 3542 com->ibufsize = ibufsize; 3543 tp = com->tp; 3544 if (tp != NULL) { 3545 tp->t_ififosize = 2 * ibufsize; 3546 tp->t_ispeedwat = (speed_t)-1; 3547 tp->t_ospeedwat = (speed_t)-1; 3548 } 3549 3550 /* 3551 * Read current input buffer, if any. Continue with interrupts 3552 * disabled. 3553 */ 3554 mtx_lock_spin(&sio_lock); 3555 if (com->iptr != com->ibuf) 3556 sioinput(com); 3557 3558 /*- 3559 * Initialize critical variables, including input buffer watermarks. 3560 * The external device is asked to stop sending when the buffer 3561 * exactly reaches high water, or when the high level requests it. 3562 * The high level is notified immediately (rather than at a later 3563 * clock tick) when this watermark is reached. 3564 * The buffer size is chosen so the watermark should almost never 3565 * be reached. 3566 * The low watermark is invisibly 0 since the buffer is always 3567 * emptied all at once. 3568 */ 3569 com->iptr = com->ibuf = ibuf; 3570 com->ibufend = ibuf + ibufsize; 3571 com->ierroff = ibufsize; 3572 com->ihighwater = ibuf + 3 * ibufsize / 4; 3573 return (0); 3574} 3575 3576static void 3577comstart(tp) 3578 struct tty *tp; 3579{ 3580 struct com_s *com; 3581 int s; 3582 int unit; 3583 3584 unit = DEV_TO_UNIT(tp->t_dev); 3585 com = com_addr(unit); 3586 if (com == NULL) 3587 return; 3588 s = spltty(); 3589 mtx_lock_spin(&sio_lock); 3590 if (tp->t_state & TS_TTSTOP) 3591 com->state &= ~CS_TTGO; 3592 else 3593 com->state |= CS_TTGO; 3594 if (tp->t_state & TS_TBLOCK) { 3595#ifdef PC98 3596 if (IS_8251(com->pc98_if_type)) { 3597 if ((com_tiocm_get(com) & TIOCM_RTS) && 3598 (com->state & CS_RTS_IFLOW)) 3599 com_tiocm_bic(com, TIOCM_RTS); 3600 } else { 3601 if ((com->mcr_image & MCR_RTS) && 3602 (com->state & CS_RTS_IFLOW)) 3603 outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS); 3604 } 3605#else 3606 if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW) 3607 outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS); 3608#endif 3609 } else { 3610#ifdef PC98 3611 if (IS_8251(com->pc98_if_type)) { 3612 if (!(com_tiocm_get(com) & TIOCM_RTS) && 3613 com->iptr < com->ihighwater && 3614 com->state & CS_RTS_IFLOW) 3615 com_tiocm_bis(com, TIOCM_RTS); 3616 } else { 3617 if (!(com->mcr_image & MCR_RTS) && 3618 com->iptr < com->ihighwater && 3619 com->state & CS_RTS_IFLOW) 3620 outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS); 3621 } 3622#else 3623 if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater 3624 && com->state & CS_RTS_IFLOW) 3625 outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS); 3626#endif 3627 } 3628 mtx_unlock_spin(&sio_lock); 3629 if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) { 3630 ttwwakeup(tp); 3631 splx(s); 3632 return; 3633 } 3634 if (tp->t_outq.c_cc != 0) { 3635 struct lbq *qp; 3636 struct lbq *next; 3637 3638 if (!com->obufs[0].l_queued) { 3639 com->obufs[0].l_tail 3640 = com->obuf1 + q_to_b(&tp->t_outq, com->obuf1, 3641#ifdef PC98 3642 com->obufsize); 3643#else 3644 sizeof com->obuf1); 3645#endif 3646 com->obufs[0].l_next = NULL; 3647 com->obufs[0].l_queued = TRUE; 3648 mtx_lock_spin(&sio_lock); 3649 if (com->state & CS_BUSY) { 3650 qp = com->obufq.l_next; 3651 while ((next = qp->l_next) != NULL) 3652 qp = next; 3653 qp->l_next = &com->obufs[0]; 3654 } else { 3655 com->obufq.l_head = com->obufs[0].l_head; 3656 com->obufq.l_tail = com->obufs[0].l_tail; 3657 com->obufq.l_next = &com->obufs[0]; 3658 com->state |= CS_BUSY; 3659 } 3660 mtx_unlock_spin(&sio_lock); 3661 } 3662 if (tp->t_outq.c_cc != 0 && !com->obufs[1].l_queued) { 3663 com->obufs[1].l_tail 3664 = com->obuf2 + q_to_b(&tp->t_outq, com->obuf2, 3665#ifdef PC98 3666 com->obufsize); 3667#else 3668 sizeof com->obuf2); 3669#endif 3670 com->obufs[1].l_next = NULL; 3671 com->obufs[1].l_queued = TRUE; 3672 mtx_lock_spin(&sio_lock); 3673 if (com->state & CS_BUSY) { 3674 qp = com->obufq.l_next; 3675 while ((next = qp->l_next) != NULL) 3676 qp = next; 3677 qp->l_next = &com->obufs[1]; 3678 } else { 3679 com->obufq.l_head = com->obufs[1].l_head; 3680 com->obufq.l_tail = com->obufs[1].l_tail; 3681 com->obufq.l_next = &com->obufs[1]; 3682 com->state |= CS_BUSY; 3683 } 3684 mtx_unlock_spin(&sio_lock); 3685 } 3686 tp->t_state |= TS_BUSY; 3687 } 3688 mtx_lock_spin(&sio_lock); 3689 if (com->state >= (CS_BUSY | CS_TTGO)) 3690 siointr1(com); /* fake interrupt to start output */ 3691 mtx_unlock_spin(&sio_lock); 3692 ttwwakeup(tp); 3693 splx(s); 3694} 3695 3696static void 3697comstop(tp, rw) 3698 struct tty *tp; 3699 int rw; 3700{ 3701 struct com_s *com; 3702#ifdef PC98 3703 int rsa98_tmp = 0; 3704#endif 3705 3706 com = com_addr(DEV_TO_UNIT(tp->t_dev)); 3707 if (com == NULL || com->gone) 3708 return; 3709 mtx_lock_spin(&sio_lock); 3710 if (rw & FWRITE) { 3711#ifdef PC98 3712 if (!IS_8251(com->pc98_if_type)) { 3713#endif 3714 if (com->hasfifo) 3715#ifdef COM_ESP 3716 /* XXX avoid h/w bug. */ 3717 if (!com->esp) 3718#endif 3719 sio_setreg(com, com_fifo, 3720 FIFO_XMT_RST | com->fifo_image); 3721#ifdef PC98 3722 if (com->pc98_if_type == COM_IF_RSA98III) 3723 for (rsa98_tmp = 0; rsa98_tmp < 2048; rsa98_tmp++) 3724 sio_setreg(com, com_fifo, 3725 FIFO_XMT_RST | com->fifo_image); 3726 } 3727#endif 3728 com->obufs[0].l_queued = FALSE; 3729 com->obufs[1].l_queued = FALSE; 3730 if (com->state & CS_ODONE) 3731 com_events -= LOTS_OF_EVENTS; 3732 com->state &= ~(CS_ODONE | CS_BUSY); 3733 com->tp->t_state &= ~TS_BUSY; 3734 } 3735 if (rw & FREAD) { 3736#ifdef PC98 3737 if (!IS_8251(com->pc98_if_type)) { 3738 if (com->pc98_if_type == COM_IF_RSA98III) 3739 for (rsa98_tmp = 0; rsa98_tmp < 2048; rsa98_tmp++) 3740 sio_getreg(com, com_data); 3741#endif 3742 if (com->hasfifo) 3743#ifdef COM_ESP 3744 /* XXX avoid h/w bug. */ 3745 if (!com->esp) 3746#endif 3747 sio_setreg(com, com_fifo, 3748 FIFO_RCV_RST | com->fifo_image); 3749#ifdef PC98 3750 } 3751#endif 3752 com_events -= (com->iptr - com->ibuf); 3753 com->iptr = com->ibuf; 3754 } 3755 mtx_unlock_spin(&sio_lock); 3756 comstart(tp); 3757} 3758 3759static int 3760commctl(com, bits, how) 3761 struct com_s *com; 3762 int bits; 3763 int how; 3764{ 3765 int mcr; 3766 int msr; 3767 3768 if (how == DMGET) { 3769 bits = TIOCM_LE; /* XXX - always enabled while open */ 3770 mcr = com->mcr_image; 3771 if (mcr & MCR_DTR) 3772 bits |= TIOCM_DTR; 3773 if (mcr & MCR_RTS) 3774 bits |= TIOCM_RTS; 3775 msr = com->prev_modem_status; 3776 if (msr & MSR_CTS) 3777 bits |= TIOCM_CTS; 3778 if (msr & MSR_DCD) 3779 bits |= TIOCM_CD; 3780 if (msr & MSR_DSR) 3781 bits |= TIOCM_DSR; 3782 /* 3783 * XXX - MSR_RI is naturally volatile, and we make MSR_TERI 3784 * more volatile by reading the modem status a lot. Perhaps 3785 * we should latch both bits until the status is read here. 3786 */ 3787 if (msr & (MSR_RI | MSR_TERI)) 3788 bits |= TIOCM_RI; 3789 return (bits); 3790 } 3791 mcr = 0; 3792 if (bits & TIOCM_DTR) 3793 mcr |= MCR_DTR; 3794 if (bits & TIOCM_RTS) 3795 mcr |= MCR_RTS; 3796 if (com->gone) 3797 return(0); 3798 mtx_lock_spin(&sio_lock); 3799 switch (how) { 3800 case DMSET: 3801 outb(com->modem_ctl_port, 3802 com->mcr_image = mcr | (com->mcr_image & MCR_IENABLE)); 3803 break; 3804 case DMBIS: 3805 outb(com->modem_ctl_port, com->mcr_image |= mcr); 3806 break; 3807 case DMBIC: 3808 outb(com->modem_ctl_port, com->mcr_image &= ~mcr); 3809 break; 3810 } 3811 mtx_unlock_spin(&sio_lock); 3812 return (0); 3813} 3814 3815static void 3816siosettimeout() 3817{ 3818 struct com_s *com; 3819 bool_t someopen; 3820 int unit; 3821 3822 /* 3823 * Set our timeout period to 1 second if no polled devices are open. 3824 * Otherwise set it to max(1/200, 1/hz). 3825 * Enable timeouts iff some device is open. 3826 */ 3827 untimeout(comwakeup, (void *)NULL, sio_timeout_handle); 3828 sio_timeout = hz; 3829 someopen = FALSE; 3830 for (unit = 0; unit < sio_numunits; ++unit) { 3831 com = com_addr(unit); 3832 if (com != NULL && com->tp != NULL 3833 && com->tp->t_state & TS_ISOPEN && !com->gone) { 3834 someopen = TRUE; 3835 if (com->poll || com->poll_output) { 3836 sio_timeout = hz > 200 ? hz / 200 : 1; 3837 break; 3838 } 3839 } 3840 } 3841 if (someopen) { 3842 sio_timeouts_until_log = hz / sio_timeout; 3843 sio_timeout_handle = timeout(comwakeup, (void *)NULL, 3844 sio_timeout); 3845 } else { 3846 /* Flush error messages, if any. */ 3847 sio_timeouts_until_log = 1; 3848 comwakeup((void *)NULL); 3849 untimeout(comwakeup, (void *)NULL, sio_timeout_handle); 3850 } 3851} 3852 3853static void 3854comwakeup(chan) 3855 void *chan; 3856{ 3857 struct com_s *com; 3858 int unit; 3859 3860 sio_timeout_handle = timeout(comwakeup, (void *)NULL, sio_timeout); 3861 3862 /* 3863 * Recover from lost output interrupts. 3864 * Poll any lines that don't use interrupts. 3865 */ 3866 for (unit = 0; unit < sio_numunits; ++unit) { 3867 com = com_addr(unit); 3868 if (com != NULL && !com->gone 3869 && (com->state >= (CS_BUSY | CS_TTGO) || com->poll)) { 3870 mtx_lock_spin(&sio_lock); 3871 siointr1(com); 3872 mtx_unlock_spin(&sio_lock); 3873 } 3874 } 3875 3876 /* 3877 * Check for and log errors, but not too often. 3878 */ 3879 if (--sio_timeouts_until_log > 0) 3880 return; 3881 sio_timeouts_until_log = hz / sio_timeout; 3882 for (unit = 0; unit < sio_numunits; ++unit) { 3883 int errnum; 3884 3885 com = com_addr(unit); 3886 if (com == NULL) 3887 continue; 3888 if (com->gone) 3889 continue; 3890 for (errnum = 0; errnum < CE_NTYPES; ++errnum) { 3891 u_int delta; 3892 u_long total; 3893 3894 mtx_lock_spin(&sio_lock); 3895 delta = com->delta_error_counts[errnum]; 3896 com->delta_error_counts[errnum] = 0; 3897 mtx_unlock_spin(&sio_lock); 3898 if (delta == 0) 3899 continue; 3900 total = com->error_counts[errnum] += delta; 3901 log(LOG_ERR, "sio%d: %u more %s%s (total %lu)\n", 3902 unit, delta, error_desc[errnum], 3903 delta == 1 ? "" : "s", total); 3904 } 3905 } 3906} 3907 3908#ifdef PC98 3909/* commint is called when modem control line changes */ 3910static void 3911commint(dev_t dev) 3912{ 3913 register struct tty *tp; 3914 int stat,delta; 3915 struct com_s *com; 3916 int mynor,unit; 3917 3918 mynor = minor(dev); 3919 unit = MINOR_TO_UNIT(mynor); 3920 com = com_addr(unit); 3921 tp = com->tp; 3922 3923 stat = com_tiocm_get(com); 3924 delta = com_tiocm_get_delta(com); 3925 3926 if (com->state & CS_CTS_OFLOW) { 3927 if (stat & TIOCM_CTS) 3928 com->state |= CS_ODEVREADY; 3929 else 3930 com->state &= ~CS_ODEVREADY; 3931 } 3932 if ((delta & TIOCM_CAR) && (mynor & CALLOUT_MASK) == 0) { 3933 if (stat & TIOCM_CAR ) 3934 (void)(*linesw[tp->t_line].l_modem)(tp, 1); 3935 else if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0) { 3936 /* negate DTR, RTS */ 3937 com_tiocm_bic(com, (tp->t_cflag & HUPCL) ? 3938 TIOCM_DTR|TIOCM_RTS|TIOCM_LE : TIOCM_LE ); 3939 /* disable IENABLE */ 3940 com_int_TxRx_disable( com ); 3941 } 3942 } 3943} 3944#endif 3945 3946static void 3947disc_optim(tp, t, com) 3948 struct tty *tp; 3949 struct termios *t; 3950 struct com_s *com; 3951{ 3952 if (!(t->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP | IXON)) 3953 && (!(t->c_iflag & BRKINT) || (t->c_iflag & IGNBRK)) 3954 && (!(t->c_iflag & PARMRK) 3955 || (t->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) 3956 && !(t->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN)) 3957 && linesw[tp->t_line].l_rint == ttyinput) 3958 tp->t_state |= TS_CAN_BYPASS_L_RINT; 3959 else 3960 tp->t_state &= ~TS_CAN_BYPASS_L_RINT; 3961 com->hotchar = linesw[tp->t_line].l_hotchar; 3962} 3963 3964/* 3965 * Following are all routines needed for SIO to act as console 3966 */ 3967#include <sys/cons.h> 3968 3969struct siocnstate { 3970 u_char dlbl; 3971 u_char dlbh; 3972 u_char ier; 3973 u_char cfcr; 3974 u_char mcr; 3975}; 3976 3977#ifndef __alpha__ 3978static speed_t siocngetspeed(Port_t, u_long rclk); 3979#endif 3980static void siocnclose(struct siocnstate *sp, Port_t iobase); 3981static void siocnopen(struct siocnstate *sp, Port_t iobase, int speed); 3982static void siocntxwait(Port_t iobase); 3983 3984#ifdef __alpha__ 3985int siocnattach(int port, int speed); 3986int siogdbattach(int port, int speed); 3987int siogdbgetc(void); 3988void siogdbputc(int c); 3989#else 3990static cn_probe_t siocnprobe; 3991static cn_init_t siocninit; 3992static cn_term_t siocnterm; 3993#endif 3994static cn_checkc_t siocncheckc; 3995static cn_getc_t siocngetc; 3996static cn_putc_t siocnputc; 3997 3998#ifndef __alpha__ 3999CONS_DRIVER(sio, siocnprobe, siocninit, siocnterm, siocngetc, siocncheckc, 4000 siocnputc, NULL); 4001#endif 4002 4003/* To get the GDB related variables */ 4004#if DDB > 0 4005#include <ddb/ddb.h> 4006#endif 4007 4008static void 4009siocntxwait(iobase) 4010 Port_t iobase; 4011{ 4012 int timo; 4013 4014 /* 4015 * Wait for any pending transmission to finish. Required to avoid 4016 * the UART lockup bug when the speed is changed, and for normal 4017 * transmits. 4018 */ 4019 timo = 100000; 4020 while ((inb(iobase + com_lsr) & (LSR_TSRE | LSR_TXRDY)) 4021 != (LSR_TSRE | LSR_TXRDY) && --timo != 0) 4022 ; 4023} 4024 4025#ifndef __alpha__ 4026 4027/* 4028 * Read the serial port specified and try to figure out what speed 4029 * it's currently running at. We're assuming the serial port has 4030 * been initialized and is basicly idle. This routine is only intended 4031 * to be run at system startup. 4032 * 4033 * If the value read from the serial port doesn't make sense, return 0. 4034 */ 4035 4036static speed_t 4037siocngetspeed(iobase, rclk) 4038 Port_t iobase; 4039 u_long rclk; 4040{ 4041 u_int divisor; 4042 u_char dlbh; 4043 u_char dlbl; 4044 u_char cfcr; 4045 4046 cfcr = inb(iobase + com_cfcr); 4047 outb(iobase + com_cfcr, CFCR_DLAB | cfcr); 4048 4049 dlbl = inb(iobase + com_dlbl); 4050 dlbh = inb(iobase + com_dlbh); 4051 4052 outb(iobase + com_cfcr, cfcr); 4053 4054 divisor = dlbh << 8 | dlbl; 4055 4056 /* XXX there should be more sanity checking. */ 4057 if (divisor == 0) 4058 return (CONSPEED); 4059 return (rclk / (16UL * divisor)); 4060} 4061 4062#endif 4063 4064static void 4065siocnopen(sp, iobase, speed) 4066 struct siocnstate *sp; 4067 Port_t iobase; 4068 int speed; 4069{ 4070 u_int divisor; 4071 u_char dlbh; 4072 u_char dlbl; 4073 4074 /* 4075 * Save all the device control registers except the fifo register 4076 * and set our default ones (cs8 -parenb speed=comdefaultrate). 4077 * We can't save the fifo register since it is read-only. 4078 */ 4079 sp->ier = inb(iobase + com_ier); 4080 outb(iobase + com_ier, 0); /* spltty() doesn't stop siointr() */ 4081 siocntxwait(iobase); 4082 sp->cfcr = inb(iobase + com_cfcr); 4083 outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS); 4084 sp->dlbl = inb(iobase + com_dlbl); 4085 sp->dlbh = inb(iobase + com_dlbh); 4086 /* 4087 * Only set the divisor registers if they would change, since on 4088 * some 16550 incompatibles (Startech), setting them clears the 4089 * data input register. This also reduces the effects of the 4090 * UMC8669F bug. 4091 */ 4092 divisor = siodivisor(comdefaultrclk, speed); 4093 dlbl = divisor & 0xFF; 4094 if (sp->dlbl != dlbl) 4095 outb(iobase + com_dlbl, dlbl); 4096 dlbh = divisor >> 8; 4097 if (sp->dlbh != dlbh) 4098 outb(iobase + com_dlbh, dlbh); 4099 outb(iobase + com_cfcr, CFCR_8BITS); 4100 sp->mcr = inb(iobase + com_mcr); 4101 /* 4102 * We don't want interrupts, but must be careful not to "disable" 4103 * them by clearing the MCR_IENABLE bit, since that might cause 4104 * an interrupt by floating the IRQ line. 4105 */ 4106 outb(iobase + com_mcr, (sp->mcr & MCR_IENABLE) | MCR_DTR | MCR_RTS); 4107} 4108 4109static void 4110siocnclose(sp, iobase) 4111 struct siocnstate *sp; 4112 Port_t iobase; 4113{ 4114 /* 4115 * Restore the device control registers. 4116 */ 4117 siocntxwait(iobase); 4118 outb(iobase + com_cfcr, CFCR_DLAB | CFCR_8BITS); 4119 if (sp->dlbl != inb(iobase + com_dlbl)) 4120 outb(iobase + com_dlbl, sp->dlbl); 4121 if (sp->dlbh != inb(iobase + com_dlbh)) 4122 outb(iobase + com_dlbh, sp->dlbh); 4123 outb(iobase + com_cfcr, sp->cfcr); 4124 /* 4125 * XXX damp oscillations of MCR_DTR and MCR_RTS by not restoring them. 4126 */ 4127 outb(iobase + com_mcr, sp->mcr | MCR_DTR | MCR_RTS); 4128 outb(iobase + com_ier, sp->ier); 4129} 4130 4131#ifndef __alpha__ 4132 4133static void 4134siocnprobe(cp) 4135 struct consdev *cp; 4136{ 4137 speed_t boot_speed; 4138 u_char cfcr; 4139 u_int divisor; 4140 int s, unit; 4141 struct siocnstate sp; 4142 4143 /* 4144 * Find our first enabled console, if any. If it is a high-level 4145 * console device, then initialize it and return successfully. 4146 * If it is a low-level console device, then initialize it and 4147 * return unsuccessfully. It must be initialized in both cases 4148 * for early use by console drivers and debuggers. Initializing 4149 * the hardware is not necessary in all cases, since the i/o 4150 * routines initialize it on the fly, but it is necessary if 4151 * input might arrive while the hardware is switched back to an 4152 * uninitialized state. We can't handle multiple console devices 4153 * yet because our low-level routines don't take a device arg. 4154 * We trust the user to set the console flags properly so that we 4155 * don't need to probe. 4156 */ 4157 cp->cn_pri = CN_DEAD; 4158 4159 for (unit = 0; unit < 16; unit++) { /* XXX need to know how many */ 4160 int flags; 4161 int disabled; 4162 if (resource_int_value("sio", unit, "disabled", &disabled) == 0) { 4163 if (disabled) 4164 continue; 4165 } 4166 if (resource_int_value("sio", unit, "flags", &flags)) 4167 continue; 4168 if (COM_CONSOLE(flags) || COM_DEBUGGER(flags)) { 4169 int port; 4170 Port_t iobase; 4171 4172 if (resource_int_value("sio", unit, "port", &port)) 4173 continue; 4174 iobase = port; 4175 s = spltty(); 4176 if (boothowto & RB_SERIAL) { 4177 boot_speed = 4178 siocngetspeed(iobase, comdefaultrclk); 4179 if (boot_speed) 4180 comdefaultrate = boot_speed; 4181 } 4182 4183 /* 4184 * Initialize the divisor latch. We can't rely on 4185 * siocnopen() to do this the first time, since it 4186 * avoids writing to the latch if the latch appears 4187 * to have the correct value. Also, if we didn't 4188 * just read the speed from the hardware, then we 4189 * need to set the speed in hardware so that 4190 * switching it later is null. 4191 */ 4192 cfcr = inb(iobase + com_cfcr); 4193 outb(iobase + com_cfcr, CFCR_DLAB | cfcr); 4194 divisor = siodivisor(comdefaultrclk, comdefaultrate); 4195 outb(iobase + com_dlbl, divisor & 0xff); 4196 outb(iobase + com_dlbh, divisor >> 8); 4197 outb(iobase + com_cfcr, cfcr); 4198 4199 siocnopen(&sp, iobase, comdefaultrate); 4200 4201 splx(s); 4202 if (COM_CONSOLE(flags) && !COM_LLCONSOLE(flags)) { 4203 cp->cn_dev = makedev(CDEV_MAJOR, unit); 4204 cp->cn_pri = COM_FORCECONSOLE(flags) 4205 || boothowto & RB_SERIAL 4206 ? CN_REMOTE : CN_NORMAL; 4207 siocniobase = iobase; 4208 siocnunit = unit; 4209 } 4210 if (COM_DEBUGGER(flags)) { 4211 printf("sio%d: gdb debugging port\n", unit); 4212 siogdbiobase = iobase; 4213 siogdbunit = unit; 4214#if DDB > 0 4215 gdbdev = makedev(CDEV_MAJOR, unit); 4216 gdb_getc = siocngetc; 4217 gdb_putc = siocnputc; 4218#endif 4219 } 4220 } 4221 } 4222#ifdef __i386__ 4223#if DDB > 0 4224 /* 4225 * XXX Ugly Compatability. 4226 * If no gdb port has been specified, set it to be the console 4227 * as some configuration files don't specify the gdb port. 4228 */ 4229 if (gdbdev == NODEV && (boothowto & RB_GDB)) { 4230 printf("Warning: no GDB port specified. Defaulting to sio%d.\n", 4231 siocnunit); 4232 printf("Set flag 0x80 on desired GDB port in your\n"); 4233 printf("configuration file (currently sio only).\n"); 4234 siogdbiobase = siocniobase; 4235 siogdbunit = siocnunit; 4236 gdbdev = makedev(CDEV_MAJOR, siocnunit); 4237 gdb_getc = siocngetc; 4238 gdb_putc = siocnputc; 4239 } 4240#endif 4241#endif 4242} 4243 4244static void 4245siocninit(cp) 4246 struct consdev *cp; 4247{ 4248 comconsole = DEV_TO_UNIT(cp->cn_dev); 4249} 4250 4251static void 4252siocnterm(cp) 4253 struct consdev *cp; 4254{ 4255 comconsole = -1; 4256} 4257 4258#endif 4259 4260#ifdef __alpha__ 4261 4262CONS_DRIVER(sio, NULL, NULL, NULL, siocngetc, siocncheckc, siocnputc, NULL); 4263 4264int 4265siocnattach(port, speed) 4266 int port; 4267 int speed; 4268{ 4269 int s; 4270 u_char cfcr; 4271 u_int divisor; 4272 struct siocnstate sp; 4273 int unit = 0; /* XXX random value! */ 4274 4275 siocniobase = port; 4276 siocnunit = unit; 4277 comdefaultrate = speed; 4278 sio_consdev.cn_pri = CN_NORMAL; 4279 sio_consdev.cn_dev = makedev(CDEV_MAJOR, unit); 4280 4281 s = spltty(); 4282 4283 /* 4284 * Initialize the divisor latch. We can't rely on 4285 * siocnopen() to do this the first time, since it 4286 * avoids writing to the latch if the latch appears 4287 * to have the correct value. Also, if we didn't 4288 * just read the speed from the hardware, then we 4289 * need to set the speed in hardware so that 4290 * switching it later is null. 4291 */ 4292 cfcr = inb(siocniobase + com_cfcr); 4293 outb(siocniobase + com_cfcr, CFCR_DLAB | cfcr); 4294 divisor = siodivisor(comdefaultrclk, comdefaultrate); 4295 outb(siocniobase + com_dlbl, divisor & 0xff); 4296 outb(siocniobase + com_dlbh, divisor >> 8); 4297 outb(siocniobase + com_cfcr, cfcr); 4298 4299 siocnopen(&sp, siocniobase, comdefaultrate); 4300 splx(s); 4301 4302 cnadd(&sio_consdev); 4303 return (0); 4304} 4305 4306int 4307siogdbattach(port, speed) 4308 int port; 4309 int speed; 4310{ 4311 int s; 4312 u_char cfcr; 4313 u_int divisor; 4314 struct siocnstate sp; 4315 int unit = 1; /* XXX random value! */ 4316 4317 siogdbiobase = port; 4318 gdbdefaultrate = speed; 4319 4320 printf("sio%d: gdb debugging port\n", unit); 4321 siogdbunit = unit; 4322#if DDB > 0 4323 gdbdev = makedev(CDEV_MAJOR, unit); 4324 gdb_getc = siocngetc; 4325 gdb_putc = siocnputc; 4326#endif 4327 4328 s = spltty(); 4329 4330 /* 4331 * Initialize the divisor latch. We can't rely on 4332 * siocnopen() to do this the first time, since it 4333 * avoids writing to the latch if the latch appears 4334 * to have the correct value. Also, if we didn't 4335 * just read the speed from the hardware, then we 4336 * need to set the speed in hardware so that 4337 * switching it later is null. 4338 */ 4339 cfcr = inb(siogdbiobase + com_cfcr); 4340 outb(siogdbiobase + com_cfcr, CFCR_DLAB | cfcr); 4341 divisor = siodivisor(comdefaultrclk, gdbdefaultrate); 4342 outb(siogdbiobase + com_dlbl, divisor & 0xff); 4343 outb(siogdbiobase + com_dlbh, divisor >> 8); 4344 outb(siogdbiobase + com_cfcr, cfcr); 4345 4346 siocnopen(&sp, siogdbiobase, gdbdefaultrate); 4347 splx(s); 4348 4349 return (0); 4350} 4351 4352#endif 4353 4354static int 4355siocncheckc(dev) 4356 dev_t dev; 4357{ 4358 int c; 4359 Port_t iobase; 4360 int s; 4361 struct siocnstate sp; 4362 speed_t speed; 4363 4364 if (minor(dev) == siocnunit) { 4365 iobase = siocniobase; 4366 speed = comdefaultrate; 4367 } else { 4368 iobase = siogdbiobase; 4369 speed = gdbdefaultrate; 4370 } 4371 s = spltty(); 4372 siocnopen(&sp, iobase, speed); 4373 if (inb(iobase + com_lsr) & LSR_RXRDY) 4374 c = inb(iobase + com_data); 4375 else 4376 c = -1; 4377 siocnclose(&sp, iobase); 4378 splx(s); 4379 return (c); 4380} 4381 4382 4383static int 4384siocngetc(dev) 4385 dev_t dev; 4386{ 4387 int c; 4388 Port_t iobase; 4389 int s; 4390 struct siocnstate sp; 4391 speed_t speed; 4392 4393 if (minor(dev) == siocnunit) { 4394 iobase = siocniobase; 4395 speed = comdefaultrate; 4396 } else { 4397 iobase = siogdbiobase; 4398 speed = gdbdefaultrate; 4399 } 4400 s = spltty(); 4401 siocnopen(&sp, iobase, speed); 4402 while (!(inb(iobase + com_lsr) & LSR_RXRDY)) 4403 ; 4404 c = inb(iobase + com_data); 4405 siocnclose(&sp, iobase); 4406 splx(s); 4407 return (c); 4408} 4409 4410static void 4411siocnputc(dev, c) 4412 dev_t dev; 4413 int c; 4414{ 4415 int need_unlock; 4416 int s; 4417 struct siocnstate sp; 4418 Port_t iobase; 4419 speed_t speed; 4420 4421 if (minor(dev) == siocnunit) { 4422 iobase = siocniobase; 4423 speed = comdefaultrate; 4424 } else { 4425 iobase = siogdbiobase; 4426 speed = gdbdefaultrate; 4427 } 4428 s = spltty(); 4429 need_unlock = 0; 4430 if (sio_inited == 2 && !mtx_owned(&sio_lock)) { 4431 mtx_lock_spin(&sio_lock); 4432 need_unlock = 1; 4433 } 4434 siocnopen(&sp, iobase, speed); 4435 siocntxwait(iobase); 4436 outb(iobase + com_data, c); 4437 siocnclose(&sp, iobase); 4438 if (need_unlock) 4439 mtx_unlock_spin(&sio_lock); 4440 splx(s); 4441} 4442 4443#ifdef __alpha__ 4444int 4445siogdbgetc() 4446{ 4447 int c; 4448 Port_t iobase; 4449 speed_t speed; 4450 int s; 4451 struct siocnstate sp; 4452 4453 if (siogdbunit == siocnunit) { 4454 iobase = siocniobase; 4455 speed = comdefaultrate; 4456 } else { 4457 iobase = siogdbiobase; 4458 speed = gdbdefaultrate; 4459 } 4460 4461 s = spltty(); 4462 siocnopen(&sp, iobase, speed); 4463 while (!(inb(iobase + com_lsr) & LSR_RXRDY)) 4464 ; 4465 c = inb(iobase + com_data); 4466 siocnclose(&sp, iobase); 4467 splx(s); 4468 return (c); 4469} 4470 4471void 4472siogdbputc(c) 4473 int c; 4474{ 4475 Port_t iobase; 4476 speed_t speed; 4477 int s; 4478 struct siocnstate sp; 4479 4480 if (siogdbunit == siocnunit) { 4481 iobase = siocniobase; 4482 speed = comdefaultrate; 4483 } else { 4484 iobase = siogdbiobase; 4485 speed = gdbdefaultrate; 4486 } 4487 4488 s = spltty(); 4489 siocnopen(&sp, iobase, speed); 4490 siocntxwait(siogdbiobase); 4491 outb(siogdbiobase + com_data, c); 4492 siocnclose(&sp, siogdbiobase); 4493 splx(s); 4494} 4495#endif 4496 4497#ifdef PC98 4498/* 4499 * pc98 local function 4500 */ 4501 4502static void 4503com_tiocm_set(struct com_s *com, int msr) 4504{ 4505 int s; 4506 int tmp = 0; 4507 int mask = CMD8251_TxEN|CMD8251_RxEN|CMD8251_DTR|CMD8251_RTS; 4508 4509 s=spltty(); 4510 com->pc98_prev_modem_status = ( msr & (TIOCM_LE|TIOCM_DTR|TIOCM_RTS) ) 4511 | ( com->pc98_prev_modem_status & ~(TIOCM_LE|TIOCM_DTR|TIOCM_RTS) ); 4512 tmp |= (CMD8251_TxEN|CMD8251_RxEN); 4513 if ( msr & TIOCM_DTR ) tmp |= CMD8251_DTR; 4514 if ( msr & TIOCM_RTS ) tmp |= CMD8251_RTS; 4515 pc98_i8251_clear_or_cmd( com, mask, tmp ); 4516 splx(s); 4517} 4518 4519static void 4520com_tiocm_bis(struct com_s *com, int msr) 4521{ 4522 int s; 4523 int tmp = 0; 4524 4525 s=spltty(); 4526 com->pc98_prev_modem_status |= ( msr & (TIOCM_LE|TIOCM_DTR|TIOCM_RTS) ); 4527 tmp |= CMD8251_TxEN|CMD8251_RxEN; 4528 if ( msr & TIOCM_DTR ) tmp |= CMD8251_DTR; 4529 if ( msr & TIOCM_RTS ) tmp |= CMD8251_RTS; 4530 4531 pc98_i8251_or_cmd( com, tmp ); 4532 splx(s); 4533} 4534 4535static void 4536com_tiocm_bic(struct com_s *com, int msr) 4537{ 4538 int s; 4539 int tmp = msr; 4540 4541 s=spltty(); 4542 com->pc98_prev_modem_status &= ~( msr & (TIOCM_LE|TIOCM_DTR|TIOCM_RTS) ); 4543 if ( msr & TIOCM_DTR ) tmp |= CMD8251_DTR; 4544 if ( msr & TIOCM_RTS ) tmp |= CMD8251_RTS; 4545 4546 pc98_i8251_clear_cmd( com, tmp ); 4547 splx(s); 4548} 4549 4550static int 4551com_tiocm_get(struct com_s *com) 4552{ 4553 return( com->pc98_prev_modem_status ); 4554} 4555 4556static int 4557com_tiocm_get_delta(struct com_s *com) 4558{ 4559 int tmp; 4560 4561 tmp = com->pc98_modem_delta; 4562 com->pc98_modem_delta = 0; 4563 return( tmp ); 4564} 4565 4566/* convert to TIOCM_?? ( ioctl.h ) */ 4567static int 4568pc98_get_modem_status(struct com_s *com) 4569{ 4570 register int msr; 4571 4572 msr = com->pc98_prev_modem_status 4573 & ~(TIOCM_CAR|TIOCM_RI|TIOCM_DSR|TIOCM_CTS); 4574 if (com->pc98_8251fifo_enable) { 4575 int stat2; 4576 4577 stat2 = inb(I8251F_msr); 4578 if ( stat2 & CICSCDF_CD ) msr |= TIOCM_CAR; 4579 if ( stat2 & CICSCDF_CI ) msr |= TIOCM_RI; 4580 if ( stat2 & CICSCDF_DR ) msr |= TIOCM_DSR; 4581 if ( stat2 & CICSCDF_CS ) msr |= TIOCM_CTS; 4582#if COM_CARRIER_DETECT_EMULATE 4583 if ( msr & (TIOCM_DSR|TIOCM_CTS) ) { 4584 msr |= TIOCM_CAR; 4585 } 4586#endif 4587 } else { 4588 int stat, stat2; 4589 4590 stat = inb(com->sts_port); 4591 stat2 = inb(com->in_modem_port); 4592 if ( !(stat2 & CICSCD_CD) ) msr |= TIOCM_CAR; 4593 if ( !(stat2 & CICSCD_CI) ) msr |= TIOCM_RI; 4594 if ( stat & STS8251_DSR ) msr |= TIOCM_DSR; 4595 if ( !(stat2 & CICSCD_CS) ) msr |= TIOCM_CTS; 4596#if COM_CARRIER_DETECT_EMULATE 4597 if ( msr & (TIOCM_DSR|TIOCM_CTS) ) { 4598 msr |= TIOCM_CAR; 4599 } 4600#endif 4601 } 4602 return(msr); 4603} 4604 4605static void 4606pc98_check_msr(void* chan) 4607{ 4608 int msr, delta; 4609 int s; 4610 register struct tty *tp; 4611 struct com_s *com; 4612 int mynor; 4613 int unit; 4614 dev_t dev; 4615 4616 dev=(dev_t)chan; 4617 mynor = minor(dev); 4618 unit = MINOR_TO_UNIT(mynor); 4619 com = com_addr(unit); 4620 tp = com->tp; 4621 4622 s = spltty(); 4623 msr = pc98_get_modem_status(com); 4624 /* make change flag */ 4625 delta = msr ^ com->pc98_prev_modem_status; 4626 if ( delta & TIOCM_CAR ) { 4627 if ( com->modem_car_chg_timer ) { 4628 if ( -- com->modem_car_chg_timer ) 4629 msr ^= TIOCM_CAR; 4630 } else { 4631 if ((com->modem_car_chg_timer = (msr & TIOCM_CAR) ? 4632 DCD_ON_RECOGNITION : DCD_OFF_TOLERANCE) != 0) 4633 msr ^= TIOCM_CAR; 4634 } 4635 } else 4636 com->modem_car_chg_timer = 0; 4637 delta = ( msr ^ com->pc98_prev_modem_status ) & 4638 (TIOCM_CAR|TIOCM_RI|TIOCM_DSR|TIOCM_CTS); 4639 com->pc98_prev_modem_status = msr; 4640 delta = ( com->pc98_modem_delta |= delta ); 4641 splx(s); 4642 if ( com->modem_checking || (tp->t_state & (TS_ISOPEN)) ) { 4643 if ( delta ) { 4644 commint(dev); 4645 } 4646 timeout(pc98_check_msr, (caddr_t)dev, 4647 PC98_CHECK_MODEM_INTERVAL); 4648 } else { 4649 com->modem_checking = 0; 4650 } 4651} 4652 4653static void 4654pc98_msrint_start(dev_t dev) 4655{ 4656 struct com_s *com; 4657 int mynor; 4658 int unit; 4659 int s = spltty(); 4660 4661 mynor = minor(dev); 4662 unit = MINOR_TO_UNIT(mynor); 4663 com = com_addr(unit); 4664 /* modem control line check routine envoke interval is 1/10 sec */ 4665 if ( com->modem_checking == 0 ) { 4666 com->pc98_prev_modem_status = pc98_get_modem_status(com); 4667 com->pc98_modem_delta = 0; 4668 timeout(pc98_check_msr, (caddr_t)dev, 4669 PC98_CHECK_MODEM_INTERVAL); 4670 com->modem_checking = 1; 4671 } 4672 splx(s); 4673} 4674 4675static void 4676pc98_disable_i8251_interrupt(struct com_s *com, int mod) 4677{ 4678 /* disable interrupt */ 4679 register int tmp; 4680 4681 mod |= ~(IEN_Tx|IEN_TxEMP|IEN_Rx); 4682 COM_INT_DISABLE 4683 tmp = inb( com->intr_ctrl_port ) & ~(IEN_Tx|IEN_TxEMP|IEN_Rx); 4684 outb( com->intr_ctrl_port, (com->intr_enable&=~mod) | tmp ); 4685 COM_INT_ENABLE 4686} 4687 4688static void 4689pc98_enable_i8251_interrupt(struct com_s *com, int mod) 4690{ 4691 register int tmp; 4692 4693 COM_INT_DISABLE 4694 tmp = inb( com->intr_ctrl_port ) & ~(IEN_Tx|IEN_TxEMP|IEN_Rx); 4695 outb( com->intr_ctrl_port, (com->intr_enable|=mod) | tmp ); 4696 COM_INT_ENABLE 4697} 4698 4699static int 4700pc98_check_i8251_interrupt(struct com_s *com) 4701{ 4702 return ( com->intr_enable & 0x07 ); 4703} 4704 4705static void 4706pc98_i8251_clear_cmd(struct com_s *com, int x) 4707{ 4708 int tmp; 4709 4710 COM_INT_DISABLE 4711 tmp = com->pc98_prev_siocmd & ~(x); 4712 if (com->pc98_8251fifo_enable) 4713 outb(I8251F_fcr, 0); 4714 outb(com->cmd_port, tmp); 4715 com->pc98_prev_siocmd = tmp & ~(CMD8251_ER|CMD8251_RESET|CMD8251_EH); 4716 if (com->pc98_8251fifo_enable) 4717 outb(I8251F_fcr, CTRL8251F_ENABLE); 4718 COM_INT_ENABLE 4719} 4720 4721static void 4722pc98_i8251_or_cmd(struct com_s *com, int x) 4723{ 4724 int tmp; 4725 4726 COM_INT_DISABLE 4727 if (com->pc98_8251fifo_enable) 4728 outb(I8251F_fcr, 0); 4729 tmp = com->pc98_prev_siocmd | (x); 4730 outb(com->cmd_port, tmp); 4731 com->pc98_prev_siocmd = tmp & ~(CMD8251_ER|CMD8251_RESET|CMD8251_EH); 4732 if (com->pc98_8251fifo_enable) 4733 outb(I8251F_fcr, CTRL8251F_ENABLE); 4734 COM_INT_ENABLE 4735} 4736 4737static void 4738pc98_i8251_set_cmd(struct com_s *com, int x) 4739{ 4740 int tmp; 4741 4742 COM_INT_DISABLE 4743 if (com->pc98_8251fifo_enable) 4744 outb(I8251F_fcr, 0); 4745 tmp = (x); 4746 outb(com->cmd_port, tmp); 4747 com->pc98_prev_siocmd = tmp & ~(CMD8251_ER|CMD8251_RESET|CMD8251_EH); 4748 if (com->pc98_8251fifo_enable) 4749 outb(I8251F_fcr, CTRL8251F_ENABLE); 4750 COM_INT_ENABLE 4751} 4752 4753static void 4754pc98_i8251_clear_or_cmd(struct com_s *com, int clr, int x) 4755{ 4756 int tmp; 4757 COM_INT_DISABLE 4758 if (com->pc98_8251fifo_enable) 4759 outb(I8251F_fcr, 0); 4760 tmp = com->pc98_prev_siocmd & ~(clr); 4761 tmp |= (x); 4762 outb(com->cmd_port, tmp); 4763 com->pc98_prev_siocmd = tmp & ~(CMD8251_ER|CMD8251_RESET|CMD8251_EH); 4764 if (com->pc98_8251fifo_enable) 4765 outb(I8251F_fcr, CTRL8251F_ENABLE); 4766 COM_INT_ENABLE 4767} 4768 4769static int 4770pc98_i8251_get_cmd(struct com_s *com) 4771{ 4772 return com->pc98_prev_siocmd; 4773} 4774 4775static int 4776pc98_i8251_get_mod(struct com_s *com) 4777{ 4778 return com->pc98_prev_siomod; 4779} 4780 4781static void 4782pc98_i8251_reset(struct com_s *com, int mode, int command) 4783{ 4784 if (com->pc98_8251fifo_enable) 4785 outb(I8251F_fcr, 0); 4786 outb(com->cmd_port, 0); /* dummy */ 4787 DELAY(2); 4788 outb(com->cmd_port, 0); /* dummy */ 4789 DELAY(2); 4790 outb(com->cmd_port, 0); /* dummy */ 4791 DELAY(2); 4792 outb(com->cmd_port, CMD8251_RESET); /* internal reset */ 4793 DELAY(2); 4794 outb(com->cmd_port, mode ); /* mode register */ 4795 com->pc98_prev_siomod = mode; 4796 DELAY(2); 4797 pc98_i8251_set_cmd( com, (command|CMD8251_ER) ); 4798 DELAY(10); 4799 if (com->pc98_8251fifo_enable) 4800 outb(I8251F_fcr, CTRL8251F_ENABLE | 4801 CTRL8251F_XMT_RST | CTRL8251F_RCV_RST); 4802} 4803 4804static void 4805pc98_check_sysclock(void) 4806{ 4807 /* get system clock from port */ 4808 if ( pc98_machine_type & M_8M ) { 4809 /* 8 MHz system & H98 */ 4810 sysclock = 8; 4811 } else { 4812 /* 5 MHz system */ 4813 sysclock = 5; 4814 } 4815} 4816 4817static void 4818com_cflag_and_speed_set( struct com_s *com, int cflag, int speed) 4819{ 4820 int cfcr=0; 4821 int previnterrupt; 4822 u_int count; 4823 4824 if (pc98_ttspeedtab(com, speed, &count) != 0) 4825 return; 4826 4827 previnterrupt = pc98_check_i8251_interrupt(com); 4828 pc98_disable_i8251_interrupt( com, IEN_Tx|IEN_TxEMP|IEN_Rx ); 4829 4830 switch ( cflag&CSIZE ) { 4831 case CS5: 4832 cfcr = MOD8251_5BITS; break; 4833 case CS6: 4834 cfcr = MOD8251_6BITS; break; 4835 case CS7: 4836 cfcr = MOD8251_7BITS; break; 4837 case CS8: 4838 cfcr = MOD8251_8BITS; break; 4839 } 4840 if ( cflag&PARENB ) { 4841 if ( cflag&PARODD ) 4842 cfcr |= MOD8251_PODD; 4843 else 4844 cfcr |= MOD8251_PEVEN; 4845 } else 4846 cfcr |= MOD8251_PDISAB; 4847 4848 if ( cflag&CSTOPB ) 4849 cfcr |= MOD8251_STOP2; 4850 else 4851 cfcr |= MOD8251_STOP1; 4852 4853 if ( count & 0x10000 ) 4854 cfcr |= MOD8251_CLKX1; 4855 else 4856 cfcr |= MOD8251_CLKX16; 4857 4858 if (epson_machine_id != 0x20) { /* XXX */ 4859 int tmp; 4860 while (!((tmp = inb(com->sts_port)) & STS8251_TxEMP)) 4861 ; 4862 } 4863 /* set baud rate from ospeed */ 4864 pc98_set_baud_rate( com, count ); 4865 4866 if ( cfcr != pc98_i8251_get_mod(com) ) 4867 pc98_i8251_reset(com, cfcr, pc98_i8251_get_cmd(com) ); 4868 4869 pc98_enable_i8251_interrupt( com, previnterrupt ); 4870} 4871 4872static int 4873pc98_ttspeedtab(struct com_s *com, int speed, u_int *divisor) 4874{ 4875 int if_type, effect_sp, count = -1, mod; 4876 4877 if_type = com->pc98_if_type & 0x0f; 4878 4879 switch (com->pc98_if_type) { 4880 case COM_IF_INTERNAL: 4881 if (PC98SIO_baud_rate_port(if_type) != -1) { 4882 count = ttspeedtab(speed, if_8251_type[if_type].speedtab); 4883 if (count > 0) { 4884 count |= COM1_EXT_CLOCK; 4885 break; 4886 } 4887 } 4888 4889 /* for *1CLK asynchronous! mode, TEFUTEFU */ 4890 mod = (sysclock == 5) ? 2457600 : 1996800; 4891 effect_sp = ttspeedtab( speed, pc98speedtab ); 4892 if ( effect_sp < 0 ) /* XXX */ 4893 effect_sp = ttspeedtab( (speed - 1), pc98speedtab ); 4894 if ( effect_sp <= 0 ) 4895 return effect_sp; 4896 if ( effect_sp == speed ) 4897 mod /= 16; 4898 if ( mod % effect_sp ) 4899 return(-1); 4900 count = mod / effect_sp; 4901 if ( count > 65535 ) 4902 return(-1); 4903 if ( effect_sp != speed ) 4904 count |= 0x10000; 4905 break; 4906 case COM_IF_PC9861K_1: 4907 case COM_IF_PC9861K_2: 4908 count = 1; 4909 break; 4910 case COM_IF_IND_SS_1: 4911 case COM_IF_IND_SS_2: 4912 case COM_IF_PIO9032B_1: 4913 case COM_IF_PIO9032B_2: 4914 count = ttspeedtab( speed, if_8251_type[if_type].speedtab ); 4915 break; 4916 case COM_IF_B98_01_1: 4917 case COM_IF_B98_01_2: 4918 count = ttspeedtab( speed, if_8251_type[if_type].speedtab ); 4919#ifdef B98_01_OLD 4920 if (count == 0 || count == 1) { 4921 count += 4; 4922 count |= 0x20000; /* x1 mode for 76800 and 153600 */ 4923 } 4924#endif 4925 break; 4926 } 4927 4928 if (count < 0) 4929 return count; 4930 4931 *divisor = (u_int) count; 4932 return 0; 4933} 4934 4935static void 4936pc98_set_baud_rate( struct com_s *com, u_int count ) 4937{ 4938 int if_type, io, s; 4939 4940 if_type = com->pc98_if_type & 0x0f; 4941 io = rman_get_start(com->ioportres) & 0xff00; 4942 4943 switch (com->pc98_if_type) { 4944 case COM_IF_INTERNAL: 4945 if (PC98SIO_baud_rate_port(if_type) != -1) { 4946 if (count & COM1_EXT_CLOCK) { 4947 outb((Port_t)PC98SIO_baud_rate_port(if_type), count & 0xff); 4948 break; 4949 } else { 4950 outb((Port_t)PC98SIO_baud_rate_port(if_type), 0x09); 4951 } 4952 } 4953 4954 if (count == 0) 4955 return; 4956 4957 /* set i8253 */ 4958 s = splclock(); 4959 if (count != 3) 4960 outb( 0x77, 0xb6 ); 4961 else 4962 outb( 0x77, 0xb4 ); 4963 outb( 0x5f, 0); 4964 outb( 0x75, count & 0xff ); 4965 outb( 0x5f, 0); 4966 outb( 0x75, (count >> 8) & 0xff ); 4967 splx(s); 4968 break; 4969 case COM_IF_IND_SS_1: 4970 case COM_IF_IND_SS_2: 4971 outb(io | PC98SIO_intr_ctrl_port(if_type), 0); 4972 outb(io | PC98SIO_baud_rate_port(if_type), 0); 4973 outb(io | PC98SIO_baud_rate_port(if_type), 0xc0); 4974 outb(io | PC98SIO_baud_rate_port(if_type), (count >> 8) | 0x80); 4975 outb(io | PC98SIO_baud_rate_port(if_type), count & 0xff); 4976 break; 4977 case COM_IF_PIO9032B_1: 4978 case COM_IF_PIO9032B_2: 4979 outb(io | PC98SIO_baud_rate_port(if_type), count); 4980 break; 4981 case COM_IF_B98_01_1: 4982 case COM_IF_B98_01_2: 4983 outb(io | PC98SIO_baud_rate_port(if_type), count & 0x0f); 4984#ifdef B98_01_OLD 4985 /* 4986 * Some old B98_01 board should be controlled 4987 * in different way, but this hasn't been tested yet. 4988 */ 4989 outb(io | PC98SIO_func_port(if_type), 4990 (count & 0x20000) ? 0xf0 : 0xf2); 4991#endif 4992 break; 4993 } 4994} 4995static int 4996pc98_check_if_type(device_t dev, struct siodev *iod) 4997{ 4998 int irr, io, if_type, tmp; 4999 static short irq_tab[2][8] = { 5000 { 3, 5, 6, 9, 10, 12, 13, -1}, 5001 { 3, 10, 12, 13, 5, 6, 9, -1} 5002 }; 5003 5004 if_type = iod->if_type & 0x0f; 5005 iod->irq = 0; 5006 io = isa_get_port(dev) & 0xff00; 5007 5008 if (IS_8251(iod->if_type)) { 5009 if (PC98SIO_func_port(if_type) != -1) { 5010 outb(io | PC98SIO_func_port(if_type), 0xf2); 5011 tmp = ttspeedtab(9600, if_8251_type[if_type].speedtab); 5012 if (tmp != -1 && PC98SIO_baud_rate_port(if_type) != -1) 5013 outb(io | PC98SIO_baud_rate_port(if_type), tmp); 5014 } 5015 5016 iod->cmd = io | PC98SIO_cmd_port(if_type); 5017 iod->sts = io | PC98SIO_sts_port(if_type); 5018 iod->mod = io | PC98SIO_in_modem_port(if_type); 5019 iod->ctrl = io | PC98SIO_intr_ctrl_port(if_type); 5020 5021 if (iod->if_type == COM_IF_INTERNAL) { 5022 iod->irq = 4; 5023 5024 if (pc98_check_8251vfast()) { 5025 PC98SIO_baud_rate_port(if_type) = I8251F_div; 5026 if_8251_type[if_type].speedtab = pc98fast_speedtab; 5027 } 5028 } else { 5029 tmp = inb( iod->mod ) & if_8251_type[if_type].irr_mask; 5030 if ((isa_get_port(dev) & 0xff) == IO_COM2) 5031 iod->irq = irq_tab[0][tmp]; 5032 else 5033 iod->irq = irq_tab[1][tmp]; 5034 } 5035 } else { 5036 irr = if_16550a_type[if_type].irr_read; 5037#ifdef COM_MULTIPORT 5038 if (!COM_ISMULTIPORT(device_get_flags(dev)) || 5039 device_get_unit(dev) == COM_MPMASTER(device_get_flags(dev))) 5040#endif 5041 if (irr != -1) { 5042 tmp = inb(io | irr); 5043 if (isa_get_port(dev) & 0x01) /* XXX depend on RSB-384 */ 5044 iod->irq = irq_tab[1][tmp >> 3]; 5045 else 5046 iod->irq = irq_tab[0][tmp & 0x07]; 5047 } 5048 } 5049 if ( iod->irq == -1 ) return -1; 5050 5051 return 0; 5052} 5053static void 5054pc98_set_ioport(struct com_s *com) 5055{ 5056 int if_type = com->pc98_if_type & 0x0f; 5057 Port_t io = rman_get_start(com->ioportres) & 0xff00; 5058 5059 pc98_check_sysclock(); 5060 com->data_port = io | PC98SIO_data_port(if_type); 5061 com->cmd_port = io | PC98SIO_cmd_port(if_type); 5062 com->sts_port = io | PC98SIO_sts_port(if_type); 5063 com->in_modem_port = io | PC98SIO_in_modem_port(if_type); 5064 com->intr_ctrl_port = io | PC98SIO_intr_ctrl_port(if_type); 5065} 5066static int 5067pc98_check_8251vfast(void) 5068{ 5069 int i; 5070 5071 outb(I8251F_div, 0x8c); 5072 DELAY(10); 5073 for (i = 0; i < 100; i++) { 5074 if ((inb(I8251F_div) & 0x80) != 0) { 5075 i = 0; 5076 break; 5077 } 5078 DELAY(1); 5079 } 5080 outb(I8251F_div, 0); 5081 DELAY(10); 5082 for (; i < 100; i++) { 5083 if ((inb(I8251F_div) & 0x80) == 0) 5084 return 1; 5085 DELAY(1); 5086 } 5087 5088 return 0; 5089} 5090static int 5091pc98_check_8251fifo(void) 5092{ 5093 u_char tmp1, tmp2; 5094 5095 tmp1 = inb(I8251F_iir); 5096 DELAY(10); 5097 tmp2 = inb(I8251F_iir); 5098 if (((tmp1 ^ tmp2) & 0x40) != 0 && ((tmp1 | tmp2) & 0x20) == 0) 5099 return 1; 5100 5101 return 0; 5102} 5103#endif /* PC98 defined */ 5104