udp6_usrreq.c revision 287124
1/*-
2 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3 * Copyright (c) 2010-2011 Juniper Networks, Inc.
4 * Copyright (c) 2014 Kevin Lo
5 * All rights reserved.
6 *
7 * Portions of this software were developed by Robert N. M. Watson under
8 * contract to Juniper Networks, Inc.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 *    notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 *    notice, this list of conditions and the following disclaimer in the
17 *    documentation and/or other materials provided with the distribution.
18 * 3. Neither the name of the project nor the names of its contributors
19 *    may be used to endorse or promote products derived from this software
20 *    without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 * SUCH DAMAGE.
33 *
34 *	$KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
35 *	$KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
36 */
37
38/*-
39 * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
40 *	The Regents of the University of California.
41 * All rights reserved.
42 *
43 * Redistribution and use in source and binary forms, with or without
44 * modification, are permitted provided that the following conditions
45 * are met:
46 * 1. Redistributions of source code must retain the above copyright
47 *    notice, this list of conditions and the following disclaimer.
48 * 2. Redistributions in binary form must reproduce the above copyright
49 *    notice, this list of conditions and the following disclaimer in the
50 *    documentation and/or other materials provided with the distribution.
51 * 4. Neither the name of the University nor the names of its contributors
52 *    may be used to endorse or promote products derived from this software
53 *    without specific prior written permission.
54 *
55 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
56 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
57 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
58 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
59 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
60 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
61 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
62 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
63 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
64 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
65 * SUCH DAMAGE.
66 *
67 *	@(#)udp_usrreq.c	8.6 (Berkeley) 5/23/95
68 */
69
70#include <sys/cdefs.h>
71__FBSDID("$FreeBSD: head/sys/netinet6/udp6_usrreq.c 287124 2015-08-25 06:12:59Z adrian $");
72
73#include "opt_inet.h"
74#include "opt_inet6.h"
75#include "opt_ipfw.h"
76#include "opt_ipsec.h"
77#include "opt_rss.h"
78
79#include <sys/param.h>
80#include <sys/jail.h>
81#include <sys/kernel.h>
82#include <sys/lock.h>
83#include <sys/mbuf.h>
84#include <sys/priv.h>
85#include <sys/proc.h>
86#include <sys/protosw.h>
87#include <sys/sdt.h>
88#include <sys/signalvar.h>
89#include <sys/socket.h>
90#include <sys/socketvar.h>
91#include <sys/sx.h>
92#include <sys/sysctl.h>
93#include <sys/syslog.h>
94#include <sys/systm.h>
95
96#include <net/if.h>
97#include <net/if_var.h>
98#include <net/if_types.h>
99#include <net/route.h>
100#include <net/rss_config.h>
101
102#include <netinet/in.h>
103#include <netinet/in_kdtrace.h>
104#include <netinet/in_pcb.h>
105#include <netinet/in_systm.h>
106#include <netinet/in_var.h>
107#include <netinet/ip.h>
108#include <netinet/ip_icmp.h>
109#include <netinet/ip6.h>
110#include <netinet/icmp_var.h>
111#include <netinet/icmp6.h>
112#include <netinet/ip_var.h>
113#include <netinet/udp.h>
114#include <netinet/udp_var.h>
115#include <netinet/udplite.h>
116
117#include <netinet6/ip6protosw.h>
118#include <netinet6/ip6_var.h>
119#include <netinet6/in6_pcb.h>
120#include <netinet6/in6_rss.h>
121#include <netinet6/udp6_var.h>
122#include <netinet6/scope6_var.h>
123
124#ifdef IPSEC
125#include <netipsec/ipsec.h>
126#include <netipsec/ipsec6.h>
127#endif /* IPSEC */
128
129#include <security/mac/mac_framework.h>
130
131/*
132 * UDP protocol implementation.
133 * Per RFC 768, August, 1980.
134 */
135
136extern struct protosw	inetsw[];
137static void		udp6_detach(struct socket *so);
138
139static int
140udp6_append(struct inpcb *inp, struct mbuf *n, int off,
141    struct sockaddr_in6 *fromsa)
142{
143	struct socket *so;
144	struct mbuf *opts;
145	struct udpcb *up;
146
147	INP_LOCK_ASSERT(inp);
148
149	/*
150	 * Engage the tunneling protocol.
151	 */
152	up = intoudpcb(inp);
153	if (up->u_tun_func != NULL) {
154		in_pcbref(inp);
155		INP_RUNLOCK(inp);
156		(*up->u_tun_func)(n, off, inp, (struct sockaddr *)fromsa,
157		    up->u_tun_ctx);
158		INP_RLOCK(inp);
159		return (in_pcbrele_rlocked(inp));
160	}
161#ifdef IPSEC
162	/* Check AH/ESP integrity. */
163	if (ipsec6_in_reject(n, inp)) {
164		m_freem(n);
165		return (0);
166	}
167#endif /* IPSEC */
168#ifdef MAC
169	if (mac_inpcb_check_deliver(inp, n) != 0) {
170		m_freem(n);
171		return (0);
172	}
173#endif
174	opts = NULL;
175	if (inp->inp_flags & INP_CONTROLOPTS ||
176	    inp->inp_socket->so_options & SO_TIMESTAMP)
177		ip6_savecontrol(inp, n, &opts);
178	m_adj(n, off + sizeof(struct udphdr));
179
180	so = inp->inp_socket;
181	SOCKBUF_LOCK(&so->so_rcv);
182	if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
183	    opts) == 0) {
184		SOCKBUF_UNLOCK(&so->so_rcv);
185		m_freem(n);
186		if (opts)
187			m_freem(opts);
188		UDPSTAT_INC(udps_fullsock);
189	} else
190		sorwakeup_locked(so);
191	return (0);
192}
193
194int
195udp6_input(struct mbuf **mp, int *offp, int proto)
196{
197	struct mbuf *m = *mp;
198	struct ifnet *ifp;
199	struct ip6_hdr *ip6;
200	struct udphdr *uh;
201	struct inpcb *inp;
202	struct inpcbinfo *pcbinfo;
203	struct udpcb *up;
204	int off = *offp;
205	int cscov_partial;
206	int plen, ulen;
207	struct sockaddr_in6 fromsa;
208	struct m_tag *fwd_tag;
209	uint16_t uh_sum;
210	uint8_t nxt;
211
212	ifp = m->m_pkthdr.rcvif;
213	ip6 = mtod(m, struct ip6_hdr *);
214
215#ifndef PULLDOWN_TEST
216	IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
217	ip6 = mtod(m, struct ip6_hdr *);
218	uh = (struct udphdr *)((caddr_t)ip6 + off);
219#else
220	IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
221	if (!uh)
222		return (IPPROTO_DONE);
223#endif
224
225	UDPSTAT_INC(udps_ipackets);
226
227	/*
228	 * Destination port of 0 is illegal, based on RFC768.
229	 */
230	if (uh->uh_dport == 0)
231		goto badunlocked;
232
233	plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
234	ulen = ntohs((u_short)uh->uh_ulen);
235
236	nxt = ip6->ip6_nxt;
237	cscov_partial = (nxt == IPPROTO_UDPLITE) ? 1 : 0;
238	if (nxt == IPPROTO_UDPLITE) {
239		/* Zero means checksum over the complete packet. */
240		if (ulen == 0)
241			ulen = plen;
242		if (ulen == plen)
243			cscov_partial = 0;
244		if ((ulen < sizeof(struct udphdr)) || (ulen > plen)) {
245			/* XXX: What is the right UDPLite MIB counter? */
246			goto badunlocked;
247		}
248		if (uh->uh_sum == 0) {
249			/* XXX: What is the right UDPLite MIB counter? */
250			goto badunlocked;
251		}
252	} else {
253		if ((ulen < sizeof(struct udphdr)) || (plen != ulen)) {
254			UDPSTAT_INC(udps_badlen);
255			goto badunlocked;
256		}
257		if (uh->uh_sum == 0) {
258			UDPSTAT_INC(udps_nosum);
259			goto badunlocked;
260		}
261	}
262
263	if ((m->m_pkthdr.csum_flags & CSUM_DATA_VALID_IPV6) &&
264	    !cscov_partial) {
265		if (m->m_pkthdr.csum_flags & CSUM_PSEUDO_HDR)
266			uh_sum = m->m_pkthdr.csum_data;
267		else
268			uh_sum = in6_cksum_pseudo(ip6, ulen, nxt,
269			    m->m_pkthdr.csum_data);
270		uh_sum ^= 0xffff;
271	} else
272		uh_sum = in6_cksum_partial(m, nxt, off, plen, ulen);
273
274	if (uh_sum != 0) {
275		UDPSTAT_INC(udps_badsum);
276		goto badunlocked;
277	}
278
279	/*
280	 * Construct sockaddr format source address.
281	 */
282	init_sin6(&fromsa, m);
283	fromsa.sin6_port = uh->uh_sport;
284
285	pcbinfo = get_inpcbinfo(nxt);
286	if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
287		struct inpcb *last;
288		struct inpcbhead *pcblist;
289		struct ip6_moptions *imo;
290
291		INP_INFO_RLOCK(pcbinfo);
292		/*
293		 * In the event that laddr should be set to the link-local
294		 * address (this happens in RIPng), the multicast address
295		 * specified in the received packet will not match laddr.  To
296		 * handle this situation, matching is relaxed if the
297		 * receiving interface is the same as one specified in the
298		 * socket and if the destination multicast address matches
299		 * one of the multicast groups specified in the socket.
300		 */
301
302		/*
303		 * KAME note: traditionally we dropped udpiphdr from mbuf
304		 * here.  We need udphdr for IPsec processing so we do that
305		 * later.
306		 */
307		pcblist = get_pcblist(nxt);
308		last = NULL;
309		LIST_FOREACH(inp, pcblist, inp_list) {
310			if ((inp->inp_vflag & INP_IPV6) == 0)
311				continue;
312			if (inp->inp_lport != uh->uh_dport)
313				continue;
314			if (inp->inp_fport != 0 &&
315			    inp->inp_fport != uh->uh_sport)
316				continue;
317			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
318				if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
319							&ip6->ip6_dst))
320					continue;
321			}
322			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
323				if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
324							&ip6->ip6_src) ||
325				    inp->inp_fport != uh->uh_sport)
326					continue;
327			}
328
329			/*
330			 * XXXRW: Because we weren't holding either the inpcb
331			 * or the hash lock when we checked for a match
332			 * before, we should probably recheck now that the
333			 * inpcb lock is (supposed to be) held.
334			 */
335
336			/*
337			 * Handle socket delivery policy for any-source
338			 * and source-specific multicast. [RFC3678]
339			 */
340			imo = inp->in6p_moptions;
341			if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
342				struct sockaddr_in6	 mcaddr;
343				int			 blocked;
344
345				INP_RLOCK(inp);
346
347				bzero(&mcaddr, sizeof(struct sockaddr_in6));
348				mcaddr.sin6_len = sizeof(struct sockaddr_in6);
349				mcaddr.sin6_family = AF_INET6;
350				mcaddr.sin6_addr = ip6->ip6_dst;
351
352				blocked = im6o_mc_filter(imo, ifp,
353					(struct sockaddr *)&mcaddr,
354					(struct sockaddr *)&fromsa);
355				if (blocked != MCAST_PASS) {
356					if (blocked == MCAST_NOTGMEMBER)
357						IP6STAT_INC(ip6s_notmember);
358					if (blocked == MCAST_NOTSMEMBER ||
359					    blocked == MCAST_MUTED)
360						UDPSTAT_INC(udps_filtermcast);
361					INP_RUNLOCK(inp); /* XXX */
362					continue;
363				}
364
365				INP_RUNLOCK(inp);
366			}
367			if (last != NULL) {
368				struct mbuf *n;
369
370				if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
371					INP_RLOCK(last);
372					UDP_PROBE(receive, NULL, last, ip6,
373					    last, uh);
374					if (udp6_append(last, n, off, &fromsa))
375						goto inp_lost;
376					INP_RUNLOCK(last);
377				}
378			}
379			last = inp;
380			/*
381			 * Don't look for additional matches if this one does
382			 * not have either the SO_REUSEPORT or SO_REUSEADDR
383			 * socket options set.  This heuristic avoids
384			 * searching through all pcbs in the common case of a
385			 * non-shared port.  It assumes that an application
386			 * will never clear these options after setting them.
387			 */
388			if ((last->inp_socket->so_options &
389			     (SO_REUSEPORT|SO_REUSEADDR)) == 0)
390				break;
391		}
392
393		if (last == NULL) {
394			/*
395			 * No matching pcb found; discard datagram.  (No need
396			 * to send an ICMP Port Unreachable for a broadcast
397			 * or multicast datgram.)
398			 */
399			UDPSTAT_INC(udps_noport);
400			UDPSTAT_INC(udps_noportmcast);
401			goto badheadlocked;
402		}
403		INP_RLOCK(last);
404		INP_INFO_RUNLOCK(pcbinfo);
405		UDP_PROBE(receive, NULL, last, ip6, last, uh);
406		if (udp6_append(last, m, off, &fromsa) == 0)
407			INP_RUNLOCK(last);
408	inp_lost:
409		return (IPPROTO_DONE);
410	}
411	/*
412	 * Locate pcb for datagram.
413	 */
414
415	/*
416	 * Grab info from PACKET_TAG_IPFORWARD tag prepended to the chain.
417	 */
418	if ((m->m_flags & M_IP6_NEXTHOP) &&
419	    (fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL)) != NULL) {
420		struct sockaddr_in6 *next_hop6;
421
422		next_hop6 = (struct sockaddr_in6 *)(fwd_tag + 1);
423
424		/*
425		 * Transparently forwarded. Pretend to be the destination.
426		 * Already got one like this?
427		 */
428		inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
429		    uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
430		    INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m);
431		if (!inp) {
432			/*
433			 * It's new.  Try to find the ambushing socket.
434			 * Because we've rewritten the destination address,
435			 * any hardware-generated hash is ignored.
436			 */
437			inp = in6_pcblookup(pcbinfo, &ip6->ip6_src,
438			    uh->uh_sport, &next_hop6->sin6_addr,
439			    next_hop6->sin6_port ? htons(next_hop6->sin6_port) :
440			    uh->uh_dport, INPLOOKUP_WILDCARD |
441			    INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif);
442		}
443		/* Remove the tag from the packet. We don't need it anymore. */
444		m_tag_delete(m, fwd_tag);
445		m->m_flags &= ~M_IP6_NEXTHOP;
446	} else
447		inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src,
448		    uh->uh_sport, &ip6->ip6_dst, uh->uh_dport,
449		    INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB,
450		    m->m_pkthdr.rcvif, m);
451	if (inp == NULL) {
452		if (udp_log_in_vain) {
453			char ip6bufs[INET6_ADDRSTRLEN];
454			char ip6bufd[INET6_ADDRSTRLEN];
455
456			log(LOG_INFO,
457			    "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
458			    ip6_sprintf(ip6bufd, &ip6->ip6_dst),
459			    ntohs(uh->uh_dport),
460			    ip6_sprintf(ip6bufs, &ip6->ip6_src),
461			    ntohs(uh->uh_sport));
462		}
463		UDPSTAT_INC(udps_noport);
464		if (m->m_flags & M_MCAST) {
465			printf("UDP6: M_MCAST is set in a unicast packet.\n");
466			UDPSTAT_INC(udps_noportmcast);
467			goto badunlocked;
468		}
469		if (V_udp_blackhole)
470			goto badunlocked;
471		if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0)
472			goto badunlocked;
473		icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
474		return (IPPROTO_DONE);
475	}
476	INP_RLOCK_ASSERT(inp);
477	up = intoudpcb(inp);
478	if (cscov_partial) {
479		if (up->u_rxcslen == 0 || up->u_rxcslen > ulen) {
480			INP_RUNLOCK(inp);
481			m_freem(m);
482			return (IPPROTO_DONE);
483		}
484	}
485	UDP_PROBE(receive, NULL, inp, ip6, inp, uh);
486	if (udp6_append(inp, m, off, &fromsa) == 0)
487		INP_RUNLOCK(inp);
488	return (IPPROTO_DONE);
489
490badheadlocked:
491	INP_INFO_RUNLOCK(pcbinfo);
492badunlocked:
493	if (m)
494		m_freem(m);
495	return (IPPROTO_DONE);
496}
497
498static void
499udp6_common_ctlinput(int cmd, struct sockaddr *sa, void *d,
500    struct inpcbinfo *pcbinfo)
501{
502	struct udphdr uh;
503	struct ip6_hdr *ip6;
504	struct mbuf *m;
505	int off = 0;
506	struct ip6ctlparam *ip6cp = NULL;
507	const struct sockaddr_in6 *sa6_src = NULL;
508	void *cmdarg;
509	struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
510	struct udp_portonly {
511		u_int16_t uh_sport;
512		u_int16_t uh_dport;
513	} *uhp;
514
515	if (sa->sa_family != AF_INET6 ||
516	    sa->sa_len != sizeof(struct sockaddr_in6))
517		return;
518
519	if ((unsigned)cmd >= PRC_NCMDS)
520		return;
521	if (PRC_IS_REDIRECT(cmd))
522		notify = in6_rtchange, d = NULL;
523	else if (cmd == PRC_HOSTDEAD)
524		d = NULL;
525	else if (inet6ctlerrmap[cmd] == 0)
526		return;
527
528	/* if the parameter is from icmp6, decode it. */
529	if (d != NULL) {
530		ip6cp = (struct ip6ctlparam *)d;
531		m = ip6cp->ip6c_m;
532		ip6 = ip6cp->ip6c_ip6;
533		off = ip6cp->ip6c_off;
534		cmdarg = ip6cp->ip6c_cmdarg;
535		sa6_src = ip6cp->ip6c_src;
536	} else {
537		m = NULL;
538		ip6 = NULL;
539		cmdarg = NULL;
540		sa6_src = &sa6_any;
541	}
542
543	if (ip6) {
544		/*
545		 * XXX: We assume that when IPV6 is non NULL,
546		 * M and OFF are valid.
547		 */
548
549		/* Check if we can safely examine src and dst ports. */
550		if (m->m_pkthdr.len < off + sizeof(*uhp))
551			return;
552
553		bzero(&uh, sizeof(uh));
554		m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);
555
556		(void)in6_pcbnotify(pcbinfo, sa, uh.uh_dport,
557		    (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
558		    cmdarg, notify);
559	} else
560		(void)in6_pcbnotify(pcbinfo, sa, 0,
561		    (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
562}
563
564void
565udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
566{
567
568	return (udp6_common_ctlinput(cmd, sa, d, &V_udbinfo));
569}
570
571void
572udplite6_ctlinput(int cmd, struct sockaddr *sa, void *d)
573{
574
575	return (udp6_common_ctlinput(cmd, sa, d, &V_ulitecbinfo));
576}
577
578static int
579udp6_getcred(SYSCTL_HANDLER_ARGS)
580{
581	struct xucred xuc;
582	struct sockaddr_in6 addrs[2];
583	struct inpcb *inp;
584	int error;
585
586	error = priv_check(req->td, PRIV_NETINET_GETCRED);
587	if (error)
588		return (error);
589
590	if (req->newlen != sizeof(addrs))
591		return (EINVAL);
592	if (req->oldlen != sizeof(struct xucred))
593		return (EINVAL);
594	error = SYSCTL_IN(req, addrs, sizeof(addrs));
595	if (error)
596		return (error);
597	if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 ||
598	    (error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) {
599		return (error);
600	}
601	inp = in6_pcblookup(&V_udbinfo, &addrs[1].sin6_addr,
602	    addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port,
603	    INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, NULL);
604	if (inp != NULL) {
605		INP_RLOCK_ASSERT(inp);
606		if (inp->inp_socket == NULL)
607			error = ENOENT;
608		if (error == 0)
609			error = cr_canseesocket(req->td->td_ucred,
610			    inp->inp_socket);
611		if (error == 0)
612			cru2x(inp->inp_cred, &xuc);
613		INP_RUNLOCK(inp);
614	} else
615		error = ENOENT;
616	if (error == 0)
617		error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
618	return (error);
619}
620
621SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
622    0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");
623
624static int
625udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
626    struct mbuf *control, struct thread *td)
627{
628	u_int32_t ulen = m->m_pkthdr.len;
629	u_int32_t plen = sizeof(struct udphdr) + ulen;
630	struct ip6_hdr *ip6;
631	struct udphdr *udp6;
632	struct in6_addr *laddr, *faddr, in6a;
633	struct sockaddr_in6 *sin6 = NULL;
634	struct ifnet *oifp = NULL;
635	int cscov_partial = 0;
636	int scope_ambiguous = 0;
637	u_short fport;
638	int error = 0;
639	uint8_t nxt;
640	uint16_t cscov = 0;
641	struct ip6_pktopts *optp, opt;
642	int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
643	int flags;
644	struct sockaddr_in6 tmp;
645
646	INP_WLOCK_ASSERT(inp);
647	INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo);
648
649	if (addr6) {
650		/* addr6 has been validated in udp6_send(). */
651		sin6 = (struct sockaddr_in6 *)addr6;
652
653		/* protect *sin6 from overwrites */
654		tmp = *sin6;
655		sin6 = &tmp;
656
657		/*
658		 * Application should provide a proper zone ID or the use of
659		 * default zone IDs should be enabled.  Unfortunately, some
660		 * applications do not behave as it should, so we need a
661		 * workaround.  Even if an appropriate ID is not determined,
662		 * we'll see if we can determine the outgoing interface.  If we
663		 * can, determine the zone ID based on the interface below.
664		 */
665		if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone)
666			scope_ambiguous = 1;
667		if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0)
668			return (error);
669	}
670
671	if (control) {
672		if ((error = ip6_setpktopts(control, &opt,
673		    inp->in6p_outputopts, td->td_ucred, IPPROTO_UDP)) != 0)
674			goto release;
675		optp = &opt;
676	} else
677		optp = inp->in6p_outputopts;
678
679	if (sin6) {
680		faddr = &sin6->sin6_addr;
681
682		/*
683		 * Since we saw no essential reason for calling in_pcbconnect,
684		 * we get rid of such kind of logic, and call in6_selectsrc
685		 * and in6_pcbsetport in order to fill in the local address
686		 * and the local port.
687		 */
688		if (sin6->sin6_port == 0) {
689			error = EADDRNOTAVAIL;
690			goto release;
691		}
692
693		if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
694			/* how about ::ffff:0.0.0.0 case? */
695			error = EISCONN;
696			goto release;
697		}
698
699		fport = sin6->sin6_port; /* allow 0 port */
700
701		if (IN6_IS_ADDR_V4MAPPED(faddr)) {
702			if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
703				/*
704				 * I believe we should explicitly discard the
705				 * packet when mapped addresses are disabled,
706				 * rather than send the packet as an IPv6 one.
707				 * If we chose the latter approach, the packet
708				 * might be sent out on the wire based on the
709				 * default route, the situation which we'd
710				 * probably want to avoid.
711				 * (20010421 jinmei@kame.net)
712				 */
713				error = EINVAL;
714				goto release;
715			}
716			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
717			    !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
718				/*
719				 * when remote addr is an IPv4-mapped address,
720				 * local addr should not be an IPv6 address,
721				 * since you cannot determine how to map IPv6
722				 * source address to IPv4.
723				 */
724				error = EINVAL;
725				goto release;
726			}
727
728			af = AF_INET;
729		}
730
731		if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
732			error = in6_selectsrc(sin6, optp, inp, NULL,
733			    td->td_ucred, &oifp, &in6a);
734			if (error)
735				goto release;
736			if (oifp && scope_ambiguous &&
737			    (error = in6_setscope(&sin6->sin6_addr,
738			    oifp, NULL))) {
739				goto release;
740			}
741			laddr = &in6a;
742		} else
743			laddr = &inp->in6p_laddr;	/* XXX */
744		if (laddr == NULL) {
745			if (error == 0)
746				error = EADDRNOTAVAIL;
747			goto release;
748		}
749		if (inp->inp_lport == 0 &&
750		    (error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0) {
751			/* Undo an address bind that may have occurred. */
752			inp->in6p_laddr = in6addr_any;
753			goto release;
754		}
755	} else {
756		if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
757			error = ENOTCONN;
758			goto release;
759		}
760		if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
761			if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) {
762				/*
763				 * XXX: this case would happen when the
764				 * application sets the V6ONLY flag after
765				 * connecting the foreign address.
766				 * Such applications should be fixed,
767				 * so we bark here.
768				 */
769				log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
770				    "option was set for a connected socket\n");
771				error = EINVAL;
772				goto release;
773			} else
774				af = AF_INET;
775		}
776		laddr = &inp->in6p_laddr;
777		faddr = &inp->in6p_faddr;
778		fport = inp->inp_fport;
779	}
780
781	if (af == AF_INET)
782		hlen = sizeof(struct ip);
783
784	/*
785	 * Calculate data length and get a mbuf
786	 * for UDP and IP6 headers.
787	 */
788	M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
789	if (m == 0) {
790		error = ENOBUFS;
791		goto release;
792	}
793
794	/*
795	 * Stuff checksum and output datagram.
796	 */
797	nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ?
798	    IPPROTO_UDP : IPPROTO_UDPLITE;
799	udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
800	udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */
801	udp6->uh_dport = fport;
802	if (nxt == IPPROTO_UDPLITE) {
803		struct udpcb *up;
804
805		up = intoudpcb(inp);
806		cscov = up->u_txcslen;
807		if (cscov >= plen)
808			cscov = 0;
809		udp6->uh_ulen = htons(cscov);
810		/*
811		 * For UDP-Lite, checksum coverage length of zero means
812		 * the entire UDPLite packet is covered by the checksum.
813		 */
814		cscov_partial = (cscov == 0) ? 0 : 1;
815	} else if (plen <= 0xffff)
816		udp6->uh_ulen = htons((u_short)plen);
817	else
818		udp6->uh_ulen = 0;
819	udp6->uh_sum = 0;
820
821	switch (af) {
822	case AF_INET6:
823		ip6 = mtod(m, struct ip6_hdr *);
824		ip6->ip6_flow	= inp->inp_flow & IPV6_FLOWINFO_MASK;
825		ip6->ip6_vfc	&= ~IPV6_VERSION_MASK;
826		ip6->ip6_vfc	|= IPV6_VERSION;
827		ip6->ip6_plen	= htons((u_short)plen);
828		ip6->ip6_nxt	= nxt;
829		ip6->ip6_hlim	= in6_selecthlim(inp, NULL);
830		ip6->ip6_src	= *laddr;
831		ip6->ip6_dst	= *faddr;
832
833		if (cscov_partial) {
834			if ((udp6->uh_sum = in6_cksum_partial(m, nxt,
835			    sizeof(struct ip6_hdr), plen, cscov)) == 0)
836				udp6->uh_sum = 0xffff;
837		} else {
838			udp6->uh_sum = in6_cksum_pseudo(ip6, plen, nxt, 0);
839			m->m_pkthdr.csum_flags = CSUM_UDP_IPV6;
840			m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum);
841		}
842
843#ifdef	RSS
844		{
845			uint32_t hash_val, hash_type;
846			uint8_t pr;
847
848			pr = inp->inp_socket->so_proto->pr_protocol;
849			/*
850			 * Calculate an appropriate RSS hash for UDP and
851			 * UDP Lite.
852			 *
853			 * The called function will take care of figuring out
854			 * whether a 2-tuple or 4-tuple hash is required based
855			 * on the currently configured scheme.
856			 *
857			 * Later later on connected socket values should be
858			 * cached in the inpcb and reused, rather than constantly
859			 * re-calculating it.
860			 *
861			 * UDP Lite is a different protocol number and will
862			 * likely end up being hashed as a 2-tuple until
863			 * RSS / NICs grow UDP Lite protocol awareness.
864			 */
865			if (rss_proto_software_hash_v6(faddr, laddr, fport,
866			    inp->inp_lport, pr, &hash_val, &hash_type) == 0) {
867				m->m_pkthdr.flowid = hash_val;
868				M_HASHTYPE_SET(m, hash_type);
869			}
870		}
871#endif
872		flags = 0;
873#ifdef	RSS
874		/*
875		 * Don't override with the inp cached flowid.
876		 *
877		 * Until the whole UDP path is vetted, it may actually
878		 * be incorrect.
879		 */
880		flags |= IP_NODEFAULTFLOWID;
881#endif
882
883		UDP_PROBE(send, NULL, inp, ip6, inp, udp6);
884		UDPSTAT_INC(udps_opackets);
885		error = ip6_output(m, optp, NULL, flags, inp->in6p_moptions,
886		    NULL, inp);
887		break;
888	case AF_INET:
889		error = EAFNOSUPPORT;
890		goto release;
891	}
892	goto releaseopt;
893
894release:
895	m_freem(m);
896
897releaseopt:
898	if (control) {
899		ip6_clearpktopts(&opt, -1);
900		m_freem(control);
901	}
902	return (error);
903}
904
905static void
906udp6_abort(struct socket *so)
907{
908	struct inpcb *inp;
909	struct inpcbinfo *pcbinfo;
910
911	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
912	inp = sotoinpcb(so);
913	KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));
914
915#ifdef INET
916	if (inp->inp_vflag & INP_IPV4) {
917		struct pr_usrreqs *pru;
918
919		pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
920		(*pru->pru_abort)(so);
921		return;
922	}
923#endif
924
925	INP_WLOCK(inp);
926	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
927		INP_HASH_WLOCK(pcbinfo);
928		in6_pcbdisconnect(inp);
929		inp->in6p_laddr = in6addr_any;
930		INP_HASH_WUNLOCK(pcbinfo);
931		soisdisconnected(so);
932	}
933	INP_WUNLOCK(inp);
934}
935
936static int
937udp6_attach(struct socket *so, int proto, struct thread *td)
938{
939	struct inpcb *inp;
940	struct inpcbinfo *pcbinfo;
941	int error;
942
943	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
944	inp = sotoinpcb(so);
945	KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));
946
947	if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
948		error = soreserve(so, udp_sendspace, udp_recvspace);
949		if (error)
950			return (error);
951	}
952	INP_INFO_WLOCK(pcbinfo);
953	error = in_pcballoc(so, pcbinfo);
954	if (error) {
955		INP_INFO_WUNLOCK(pcbinfo);
956		return (error);
957	}
958	inp = (struct inpcb *)so->so_pcb;
959	inp->inp_vflag |= INP_IPV6;
960	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
961		inp->inp_vflag |= INP_IPV4;
962	inp->in6p_hops = -1;	/* use kernel default */
963	inp->in6p_cksum = -1;	/* just to be sure */
964	/*
965	 * XXX: ugly!!
966	 * IPv4 TTL initialization is necessary for an IPv6 socket as well,
967	 * because the socket may be bound to an IPv6 wildcard address,
968	 * which may match an IPv4-mapped IPv6 address.
969	 */
970	inp->inp_ip_ttl = V_ip_defttl;
971
972	error = udp_newudpcb(inp);
973	if (error) {
974		in_pcbdetach(inp);
975		in_pcbfree(inp);
976		INP_INFO_WUNLOCK(pcbinfo);
977		return (error);
978	}
979	INP_WUNLOCK(inp);
980	INP_INFO_WUNLOCK(pcbinfo);
981	return (0);
982}
983
984static int
985udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
986{
987	struct inpcb *inp;
988	struct inpcbinfo *pcbinfo;
989	int error;
990
991	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
992	inp = sotoinpcb(so);
993	KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));
994
995	INP_WLOCK(inp);
996	INP_HASH_WLOCK(pcbinfo);
997	inp->inp_vflag &= ~INP_IPV4;
998	inp->inp_vflag |= INP_IPV6;
999	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
1000		struct sockaddr_in6 *sin6_p;
1001
1002		sin6_p = (struct sockaddr_in6 *)nam;
1003
1004		if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
1005			inp->inp_vflag |= INP_IPV4;
1006#ifdef INET
1007		else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
1008			struct sockaddr_in sin;
1009
1010			in6_sin6_2_sin(&sin, sin6_p);
1011			inp->inp_vflag |= INP_IPV4;
1012			inp->inp_vflag &= ~INP_IPV6;
1013			error = in_pcbbind(inp, (struct sockaddr *)&sin,
1014			    td->td_ucred);
1015			goto out;
1016		}
1017#endif
1018	}
1019
1020	error = in6_pcbbind(inp, nam, td->td_ucred);
1021#ifdef INET
1022out:
1023#endif
1024	INP_HASH_WUNLOCK(pcbinfo);
1025	INP_WUNLOCK(inp);
1026	return (error);
1027}
1028
1029static void
1030udp6_close(struct socket *so)
1031{
1032	struct inpcb *inp;
1033	struct inpcbinfo *pcbinfo;
1034
1035	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1036	inp = sotoinpcb(so);
1037	KASSERT(inp != NULL, ("udp6_close: inp == NULL"));
1038
1039#ifdef INET
1040	if (inp->inp_vflag & INP_IPV4) {
1041		struct pr_usrreqs *pru;
1042
1043		pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1044		(*pru->pru_disconnect)(so);
1045		return;
1046	}
1047#endif
1048	INP_WLOCK(inp);
1049	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1050		INP_HASH_WLOCK(pcbinfo);
1051		in6_pcbdisconnect(inp);
1052		inp->in6p_laddr = in6addr_any;
1053		INP_HASH_WUNLOCK(pcbinfo);
1054		soisdisconnected(so);
1055	}
1056	INP_WUNLOCK(inp);
1057}
1058
1059static int
1060udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
1061{
1062	struct inpcb *inp;
1063	struct inpcbinfo *pcbinfo;
1064	struct sockaddr_in6 *sin6;
1065	int error;
1066
1067	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1068	inp = sotoinpcb(so);
1069	sin6 = (struct sockaddr_in6 *)nam;
1070	KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));
1071
1072	/*
1073	 * XXXRW: Need to clarify locking of v4/v6 flags.
1074	 */
1075	INP_WLOCK(inp);
1076#ifdef INET
1077	if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
1078		struct sockaddr_in sin;
1079
1080		if ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0) {
1081			error = EINVAL;
1082			goto out;
1083		}
1084		if (inp->inp_faddr.s_addr != INADDR_ANY) {
1085			error = EISCONN;
1086			goto out;
1087		}
1088		in6_sin6_2_sin(&sin, sin6);
1089		inp->inp_vflag |= INP_IPV4;
1090		inp->inp_vflag &= ~INP_IPV6;
1091		error = prison_remote_ip4(td->td_ucred, &sin.sin_addr);
1092		if (error != 0)
1093			goto out;
1094		INP_HASH_WLOCK(pcbinfo);
1095		error = in_pcbconnect(inp, (struct sockaddr *)&sin,
1096		    td->td_ucred);
1097		INP_HASH_WUNLOCK(pcbinfo);
1098		if (error == 0)
1099			soisconnected(so);
1100		goto out;
1101	}
1102#endif
1103	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1104		error = EISCONN;
1105		goto out;
1106	}
1107	inp->inp_vflag &= ~INP_IPV4;
1108	inp->inp_vflag |= INP_IPV6;
1109	error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr);
1110	if (error != 0)
1111		goto out;
1112	INP_HASH_WLOCK(pcbinfo);
1113	error = in6_pcbconnect(inp, nam, td->td_ucred);
1114	INP_HASH_WUNLOCK(pcbinfo);
1115	if (error == 0)
1116		soisconnected(so);
1117out:
1118	INP_WUNLOCK(inp);
1119	return (error);
1120}
1121
1122static void
1123udp6_detach(struct socket *so)
1124{
1125	struct inpcb *inp;
1126	struct inpcbinfo *pcbinfo;
1127	struct udpcb *up;
1128
1129	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1130	inp = sotoinpcb(so);
1131	KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));
1132
1133	INP_INFO_WLOCK(pcbinfo);
1134	INP_WLOCK(inp);
1135	up = intoudpcb(inp);
1136	KASSERT(up != NULL, ("%s: up == NULL", __func__));
1137	in_pcbdetach(inp);
1138	in_pcbfree(inp);
1139	INP_INFO_WUNLOCK(pcbinfo);
1140	udp_discardcb(up);
1141}
1142
1143static int
1144udp6_disconnect(struct socket *so)
1145{
1146	struct inpcb *inp;
1147	struct inpcbinfo *pcbinfo;
1148	int error;
1149
1150	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1151	inp = sotoinpcb(so);
1152	KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));
1153
1154#ifdef INET
1155	if (inp->inp_vflag & INP_IPV4) {
1156		struct pr_usrreqs *pru;
1157
1158		pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1159		(void)(*pru->pru_disconnect)(so);
1160		return (0);
1161	}
1162#endif
1163
1164	INP_WLOCK(inp);
1165
1166	if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
1167		error = ENOTCONN;
1168		goto out;
1169	}
1170
1171	INP_HASH_WLOCK(pcbinfo);
1172	in6_pcbdisconnect(inp);
1173	inp->in6p_laddr = in6addr_any;
1174	INP_HASH_WUNLOCK(pcbinfo);
1175	SOCK_LOCK(so);
1176	so->so_state &= ~SS_ISCONNECTED;		/* XXX */
1177	SOCK_UNLOCK(so);
1178out:
1179	INP_WUNLOCK(inp);
1180	return (0);
1181}
1182
1183static int
1184udp6_send(struct socket *so, int flags, struct mbuf *m,
1185    struct sockaddr *addr, struct mbuf *control, struct thread *td)
1186{
1187	struct inpcb *inp;
1188	struct inpcbinfo *pcbinfo;
1189	int error = 0;
1190
1191	pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol);
1192	inp = sotoinpcb(so);
1193	KASSERT(inp != NULL, ("udp6_send: inp == NULL"));
1194
1195	INP_WLOCK(inp);
1196	if (addr) {
1197		if (addr->sa_len != sizeof(struct sockaddr_in6)) {
1198			error = EINVAL;
1199			goto bad;
1200		}
1201		if (addr->sa_family != AF_INET6) {
1202			error = EAFNOSUPPORT;
1203			goto bad;
1204		}
1205	}
1206
1207#ifdef INET
1208	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
1209		int hasv4addr;
1210		struct sockaddr_in6 *sin6 = 0;
1211
1212		if (addr == 0)
1213			hasv4addr = (inp->inp_vflag & INP_IPV4);
1214		else {
1215			sin6 = (struct sockaddr_in6 *)addr;
1216			hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
1217			    ? 1 : 0;
1218		}
1219		if (hasv4addr) {
1220			struct pr_usrreqs *pru;
1221
1222			/*
1223			 * XXXRW: We release UDP-layer locks before calling
1224			 * udp_send() in order to avoid recursion.  However,
1225			 * this does mean there is a short window where inp's
1226			 * fields are unstable.  Could this lead to a
1227			 * potential race in which the factors causing us to
1228			 * select the UDPv4 output routine are invalidated?
1229			 */
1230			INP_WUNLOCK(inp);
1231			if (sin6)
1232				in6_sin6_2_sin_in_sock(addr);
1233			pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
1234			/* addr will just be freed in sendit(). */
1235			return ((*pru->pru_send)(so, flags, m, addr, control,
1236			    td));
1237		}
1238	}
1239#endif
1240#ifdef MAC
1241	mac_inpcb_create_mbuf(inp, m);
1242#endif
1243	INP_HASH_WLOCK(pcbinfo);
1244	error = udp6_output(inp, m, addr, control, td);
1245	INP_HASH_WUNLOCK(pcbinfo);
1246#ifdef INET
1247#endif
1248	INP_WUNLOCK(inp);
1249	return (error);
1250
1251bad:
1252	INP_WUNLOCK(inp);
1253	m_freem(m);
1254	return (error);
1255}
1256
1257struct pr_usrreqs udp6_usrreqs = {
1258	.pru_abort =		udp6_abort,
1259	.pru_attach =		udp6_attach,
1260	.pru_bind =		udp6_bind,
1261	.pru_connect =		udp6_connect,
1262	.pru_control =		in6_control,
1263	.pru_detach =		udp6_detach,
1264	.pru_disconnect =	udp6_disconnect,
1265	.pru_peeraddr =		in6_mapped_peeraddr,
1266	.pru_send =		udp6_send,
1267	.pru_shutdown =		udp_shutdown,
1268	.pru_sockaddr =		in6_mapped_sockaddr,
1269	.pru_soreceive =	soreceive_dgram,
1270	.pru_sosend =		sosend_dgram,
1271	.pru_sosetlabel =	in_pcbsosetlabel,
1272	.pru_close =		udp6_close
1273};
1274