ieee80211_freebsd.h revision 283614
1/*- 2 * Copyright (c) 2003-2008 Sam Leffler, Errno Consulting 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 * 25 * $FreeBSD: head/sys/net80211/ieee80211_freebsd.h 283614 2015-05-27 14:05:46Z glebius $ 26 */ 27#ifndef _NET80211_IEEE80211_FREEBSD_H_ 28#define _NET80211_IEEE80211_FREEBSD_H_ 29 30#ifdef _KERNEL 31#include <sys/types.h> 32#include <sys/systm.h> 33#include <sys/counter.h> 34#include <sys/lock.h> 35#include <sys/mutex.h> 36#include <sys/rwlock.h> 37#include <sys/sysctl.h> 38#include <sys/taskqueue.h> 39 40/* 41 * Common state locking definitions. 42 */ 43typedef struct { 44 char name[16]; /* e.g. "ath0_com_lock" */ 45 struct mtx mtx; 46} ieee80211_com_lock_t; 47#define IEEE80211_LOCK_INIT(_ic, _name) do { \ 48 ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \ 49 snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \ 50 mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \ 51} while (0) 52#define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx) 53#define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic)) 54#define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic)) 55#define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic)) 56#define IEEE80211_LOCK_ASSERT(_ic) \ 57 mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED) 58#define IEEE80211_UNLOCK_ASSERT(_ic) \ 59 mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_NOTOWNED) 60 61/* 62 * Transmit lock. 63 * 64 * This is a (mostly) temporary lock designed to serialise all of the 65 * transmission operations throughout the stack. 66 */ 67typedef struct { 68 char name[16]; /* e.g. "ath0_com_lock" */ 69 struct mtx mtx; 70} ieee80211_tx_lock_t; 71#define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \ 72 ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \ 73 snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \ 74 mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF); \ 75} while (0) 76#define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx) 77#define IEEE80211_TX_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_TX_LOCK_OBJ(_ic)) 78#define IEEE80211_TX_LOCK(_ic) mtx_lock(IEEE80211_TX_LOCK_OBJ(_ic)) 79#define IEEE80211_TX_UNLOCK(_ic) mtx_unlock(IEEE80211_TX_LOCK_OBJ(_ic)) 80#define IEEE80211_TX_LOCK_ASSERT(_ic) \ 81 mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_OWNED) 82#define IEEE80211_TX_UNLOCK_ASSERT(_ic) \ 83 mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_NOTOWNED) 84 85/* 86 * Node locking definitions. 87 */ 88typedef struct { 89 char name[16]; /* e.g. "ath0_node_lock" */ 90 struct mtx mtx; 91} ieee80211_node_lock_t; 92#define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \ 93 ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \ 94 snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \ 95 mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \ 96} while (0) 97#define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx) 98#define IEEE80211_NODE_LOCK_DESTROY(_nt) \ 99 mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt)) 100#define IEEE80211_NODE_LOCK(_nt) \ 101 mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt)) 102#define IEEE80211_NODE_IS_LOCKED(_nt) \ 103 mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt)) 104#define IEEE80211_NODE_UNLOCK(_nt) \ 105 mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt)) 106#define IEEE80211_NODE_LOCK_ASSERT(_nt) \ 107 mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED) 108 109/* 110 * Node table iteration locking definitions; this protects the 111 * scan generation # used to iterate over the station table 112 * while grabbing+releasing the node lock. 113 */ 114typedef struct { 115 char name[16]; /* e.g. "ath0_scan_lock" */ 116 struct mtx mtx; 117} ieee80211_scan_lock_t; 118#define IEEE80211_NODE_ITERATE_LOCK_INIT(_nt, _name) do { \ 119 ieee80211_scan_lock_t *sl = &(_nt)->nt_scanlock; \ 120 snprintf(sl->name, sizeof(sl->name), "%s_scan_lock", _name); \ 121 mtx_init(&sl->mtx, sl->name, NULL, MTX_DEF); \ 122} while (0) 123#define IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt) (&(_nt)->nt_scanlock.mtx) 124#define IEEE80211_NODE_ITERATE_LOCK_DESTROY(_nt) \ 125 mtx_destroy(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) 126#define IEEE80211_NODE_ITERATE_LOCK(_nt) \ 127 mtx_lock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) 128#define IEEE80211_NODE_ITERATE_UNLOCK(_nt) \ 129 mtx_unlock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) 130 131/* 132 * Power-save queue definitions. 133 */ 134typedef struct mtx ieee80211_psq_lock_t; 135#define IEEE80211_PSQ_INIT(_psq, _name) \ 136 mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF) 137#define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock) 138#define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock) 139#define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock) 140 141#ifndef IF_PREPEND_LIST 142#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ 143 (mtail)->m_nextpkt = (ifq)->ifq_head; \ 144 if ((ifq)->ifq_tail == NULL) \ 145 (ifq)->ifq_tail = (mtail); \ 146 (ifq)->ifq_head = (mhead); \ 147 (ifq)->ifq_len += (mcount); \ 148} while (0) 149#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ 150 IF_LOCK(ifq); \ 151 _IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \ 152 IF_UNLOCK(ifq); \ 153} while (0) 154#endif /* IF_PREPEND_LIST */ 155 156/* 157 * Age queue definitions. 158 */ 159typedef struct mtx ieee80211_ageq_lock_t; 160#define IEEE80211_AGEQ_INIT(_aq, _name) \ 161 mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF) 162#define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock) 163#define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock) 164#define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock) 165 166/* 167 * 802.1x MAC ACL database locking definitions. 168 */ 169typedef struct mtx acl_lock_t; 170#define ACL_LOCK_INIT(_as, _name) \ 171 mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF) 172#define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock) 173#define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock) 174#define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock) 175#define ACL_LOCK_ASSERT(_as) \ 176 mtx_assert((&(_as)->as_lock), MA_OWNED) 177 178/* 179 * Scan table definitions. 180 */ 181typedef struct mtx ieee80211_scan_table_lock_t; 182#define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \ 183 mtx_init(&(_st)->st_lock, _name, "802.11 scan table", MTX_DEF) 184#define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_lock) 185#define IEEE80211_SCAN_TABLE_LOCK(_st) mtx_lock(&(_st)->st_lock) 186#define IEEE80211_SCAN_TABLE_UNLOCK(_st) mtx_unlock(&(_st)->st_lock) 187 188typedef struct mtx ieee80211_scan_iter_lock_t; 189#define IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \ 190 mtx_init(&(_st)->st_scanlock, _name, "802.11 scangen", MTX_DEF) 191#define IEEE80211_SCAN_ITER_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_scanlock) 192#define IEEE80211_SCAN_ITER_LOCK(_st) mtx_lock(&(_st)->st_scanlock) 193#define IEEE80211_SCAN_ITER_UNLOCK(_st) mtx_unlock(&(_st)->st_scanlock) 194 195/* 196 * Mesh node/routing definitions. 197 */ 198typedef struct mtx ieee80211_rte_lock_t; 199#define MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \ 200 mtx_init(&(rt)->rt_lock, _name, "802.11s route entry", MTX_DEF) 201#define MESH_RT_ENTRY_LOCK_DESTROY(_rt) \ 202 mtx_destroy(&(_rt)->rt_lock) 203#define MESH_RT_ENTRY_LOCK(rt) mtx_lock(&(rt)->rt_lock) 204#define MESH_RT_ENTRY_LOCK_ASSERT(rt) mtx_assert(&(rt)->rt_lock, MA_OWNED) 205#define MESH_RT_ENTRY_UNLOCK(rt) mtx_unlock(&(rt)->rt_lock) 206 207typedef struct mtx ieee80211_rt_lock_t; 208#define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock) 209#define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED) 210#define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock) 211#define MESH_RT_LOCK_INIT(ms, name) \ 212 mtx_init(&(ms)->ms_rt_lock, name, "802.11s routing table", MTX_DEF) 213#define MESH_RT_LOCK_DESTROY(ms) \ 214 mtx_destroy(&(ms)->ms_rt_lock) 215 216/* 217 * Node reference counting definitions. 218 * 219 * ieee80211_node_initref initialize the reference count to 1 220 * ieee80211_node_incref add a reference 221 * ieee80211_node_decref remove a reference 222 * ieee80211_node_dectestref remove a reference and return 1 if this 223 * is the last reference, otherwise 0 224 * ieee80211_node_refcnt reference count for printing (only) 225 */ 226#include <machine/atomic.h> 227 228#define ieee80211_node_initref(_ni) \ 229 do { ((_ni)->ni_refcnt = 1); } while (0) 230#define ieee80211_node_incref(_ni) \ 231 atomic_add_int(&(_ni)->ni_refcnt, 1) 232#define ieee80211_node_decref(_ni) \ 233 atomic_subtract_int(&(_ni)->ni_refcnt, 1) 234struct ieee80211_node; 235int ieee80211_node_dectestref(struct ieee80211_node *ni); 236#define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt 237 238struct ifqueue; 239struct ieee80211vap; 240void ieee80211_drain_ifq(struct ifqueue *); 241void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *); 242 243void ieee80211_vap_destroy(struct ieee80211vap *); 244 245#define IFNET_IS_UP_RUNNING(_ifp) \ 246 (((_ifp)->if_flags & IFF_UP) && \ 247 ((_ifp)->if_drv_flags & IFF_DRV_RUNNING)) 248 249#define msecs_to_ticks(ms) (((ms)*hz)/1000) 250#define ticks_to_msecs(t) (1000*(t) / hz) 251#define ticks_to_secs(t) ((t) / hz) 252#define time_after(a,b) ((long)(b) - (long)(a) < 0) 253#define time_before(a,b) time_after(b,a) 254#define time_after_eq(a,b) ((long)(a) - (long)(b) >= 0) 255#define time_before_eq(a,b) time_after_eq(b,a) 256 257struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen); 258 259/* tx path usage */ 260#define M_ENCAP M_PROTO1 /* 802.11 encap done */ 261#define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */ 262#define M_PWR_SAV M_PROTO4 /* bypass PS handling */ 263#define M_MORE_DATA M_PROTO5 /* more data frames to follow */ 264#define M_FF M_PROTO6 /* fast frame */ 265#define M_TXCB M_PROTO7 /* do tx complete callback */ 266#define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */ 267#define M_FRAG M_PROTO9 /* frame fragmentation */ 268#define M_FIRSTFRAG M_PROTO10 /* first frame fragment */ 269#define M_LASTFRAG M_PROTO11 /* last frame fragment */ 270 271#define M_80211_TX \ 272 (M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \ 273 M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG) 274 275/* rx path usage */ 276#define M_AMPDU M_PROTO1 /* A-MPDU subframe */ 277#define M_WEP M_PROTO2 /* WEP done by hardware */ 278#if 0 279#define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */ 280#endif 281#define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU) 282 283#define IEEE80211_MBUF_TX_FLAG_BITS \ 284 M_FLAG_BITS \ 285 "\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \ 286 "\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG" 287 288#define IEEE80211_MBUF_RX_FLAG_BITS \ 289 M_FLAG_BITS \ 290 "\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU" 291 292/* 293 * Store WME access control bits in the vlan tag. 294 * This is safe since it's done after the packet is classified 295 * (where we use any previous tag) and because it's passed 296 * directly in to the driver and there's no chance someone 297 * else will clobber them on us. 298 */ 299#define M_WME_SETAC(m, ac) \ 300 ((m)->m_pkthdr.ether_vtag = (ac)) 301#define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag) 302 303/* 304 * Mbufs on the power save queue are tagged with an age and 305 * timed out. We reuse the hardware checksum field in the 306 * mbuf packet header to store this data. 307 */ 308#define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v) 309#define M_AGE_GET(m) (m->m_pkthdr.csum_data) 310#define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj) 311 312/* 313 * Store the sequence number. 314 */ 315#define M_SEQNO_SET(m, seqno) \ 316 ((m)->m_pkthdr.tso_segsz = (seqno)) 317#define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz) 318 319#define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */ 320 321struct ieee80211_cb { 322 void (*func)(struct ieee80211_node *, void *, int status); 323 void *arg; 324}; 325#define NET80211_TAG_CALLBACK 0 /* xmit complete callback */ 326int ieee80211_add_callback(struct mbuf *m, 327 void (*func)(struct ieee80211_node *, void *, int), void *arg); 328void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int); 329 330struct ieee80211com; 331int ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *); 332int ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *); 333 334void get_random_bytes(void *, size_t); 335 336void ieee80211_sysctl_attach(struct ieee80211com *); 337void ieee80211_sysctl_detach(struct ieee80211com *); 338void ieee80211_sysctl_vattach(struct ieee80211vap *); 339void ieee80211_sysctl_vdetach(struct ieee80211vap *); 340 341SYSCTL_DECL(_net_wlan); 342int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS); 343 344void ieee80211_load_module(const char *); 345 346/* 347 * A "policy module" is an adjunct module to net80211 that provides 348 * functionality that typically includes policy decisions. This 349 * modularity enables extensibility and vendor-supplied functionality. 350 */ 351#define _IEEE80211_POLICY_MODULE(policy, name, version) \ 352typedef void (*policy##_setup)(int); \ 353SET_DECLARE(policy##_set, policy##_setup); \ 354static int \ 355wlan_##name##_modevent(module_t mod, int type, void *unused) \ 356{ \ 357 policy##_setup * const *iter, f; \ 358 switch (type) { \ 359 case MOD_LOAD: \ 360 SET_FOREACH(iter, policy##_set) { \ 361 f = (void*) *iter; \ 362 f(type); \ 363 } \ 364 return 0; \ 365 case MOD_UNLOAD: \ 366 case MOD_QUIESCE: \ 367 if (nrefs) { \ 368 printf("wlan_" #name ": still in use " \ 369 "(%u dynamic refs)\n", nrefs); \ 370 return EBUSY; \ 371 } \ 372 if (type == MOD_UNLOAD) { \ 373 SET_FOREACH(iter, policy##_set) { \ 374 f = (void*) *iter; \ 375 f(type); \ 376 } \ 377 } \ 378 return 0; \ 379 } \ 380 return EINVAL; \ 381} \ 382static moduledata_t name##_mod = { \ 383 "wlan_" #name, \ 384 wlan_##name##_modevent, \ 385 0 \ 386}; \ 387DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\ 388MODULE_VERSION(wlan_##name, version); \ 389MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1) 390 391/* 392 * Crypto modules implement cipher support. 393 */ 394#define IEEE80211_CRYPTO_MODULE(name, version) \ 395_IEEE80211_POLICY_MODULE(crypto, name, version); \ 396static void \ 397name##_modevent(int type) \ 398{ \ 399 if (type == MOD_LOAD) \ 400 ieee80211_crypto_register(&name); \ 401 else \ 402 ieee80211_crypto_unregister(&name); \ 403} \ 404TEXT_SET(crypto##_set, name##_modevent) 405 406/* 407 * Scanner modules provide scanning policy. 408 */ 409#define IEEE80211_SCANNER_MODULE(name, version) \ 410 _IEEE80211_POLICY_MODULE(scanner, name, version) 411 412#define IEEE80211_SCANNER_ALG(name, alg, v) \ 413static void \ 414name##_modevent(int type) \ 415{ \ 416 if (type == MOD_LOAD) \ 417 ieee80211_scanner_register(alg, &v); \ 418 else \ 419 ieee80211_scanner_unregister(alg, &v); \ 420} \ 421TEXT_SET(scanner_set, name##_modevent); \ 422 423/* 424 * ACL modules implement acl policy. 425 */ 426#define IEEE80211_ACL_MODULE(name, alg, version) \ 427_IEEE80211_POLICY_MODULE(acl, name, version); \ 428static void \ 429alg##_modevent(int type) \ 430{ \ 431 if (type == MOD_LOAD) \ 432 ieee80211_aclator_register(&alg); \ 433 else \ 434 ieee80211_aclator_unregister(&alg); \ 435} \ 436TEXT_SET(acl_set, alg##_modevent); \ 437 438/* 439 * Authenticator modules handle 802.1x/WPA authentication. 440 */ 441#define IEEE80211_AUTH_MODULE(name, version) \ 442 _IEEE80211_POLICY_MODULE(auth, name, version) 443 444#define IEEE80211_AUTH_ALG(name, alg, v) \ 445static void \ 446name##_modevent(int type) \ 447{ \ 448 if (type == MOD_LOAD) \ 449 ieee80211_authenticator_register(alg, &v); \ 450 else \ 451 ieee80211_authenticator_unregister(alg); \ 452} \ 453TEXT_SET(auth_set, name##_modevent) 454 455/* 456 * Rate control modules provide tx rate control support. 457 */ 458#define IEEE80211_RATECTL_MODULE(alg, version) \ 459 _IEEE80211_POLICY_MODULE(ratectl, alg, version); \ 460 461#define IEEE80211_RATECTL_ALG(name, alg, v) \ 462static void \ 463alg##_modevent(int type) \ 464{ \ 465 if (type == MOD_LOAD) \ 466 ieee80211_ratectl_register(alg, &v); \ 467 else \ 468 ieee80211_ratectl_unregister(alg); \ 469} \ 470TEXT_SET(ratectl##_set, alg##_modevent) 471 472struct ieee80211req; 473typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *, 474 struct ieee80211req *); 475SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc); 476#define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get) 477 478typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *, 479 struct ieee80211req *); 480SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc); 481#define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set) 482#endif /* _KERNEL */ 483 484/* XXX this stuff belongs elsewhere */ 485/* 486 * Message formats for messages from the net80211 layer to user 487 * applications via the routing socket. These messages are appended 488 * to an if_announcemsghdr structure. 489 */ 490struct ieee80211_join_event { 491 uint8_t iev_addr[6]; 492}; 493 494struct ieee80211_leave_event { 495 uint8_t iev_addr[6]; 496}; 497 498struct ieee80211_replay_event { 499 uint8_t iev_src[6]; /* src MAC */ 500 uint8_t iev_dst[6]; /* dst MAC */ 501 uint8_t iev_cipher; /* cipher type */ 502 uint8_t iev_keyix; /* key id/index */ 503 uint64_t iev_keyrsc; /* RSC from key */ 504 uint64_t iev_rsc; /* RSC from frame */ 505}; 506 507struct ieee80211_michael_event { 508 uint8_t iev_src[6]; /* src MAC */ 509 uint8_t iev_dst[6]; /* dst MAC */ 510 uint8_t iev_cipher; /* cipher type */ 511 uint8_t iev_keyix; /* key id/index */ 512}; 513 514struct ieee80211_wds_event { 515 uint8_t iev_addr[6]; 516}; 517 518struct ieee80211_csa_event { 519 uint32_t iev_flags; /* channel flags */ 520 uint16_t iev_freq; /* setting in Mhz */ 521 uint8_t iev_ieee; /* IEEE channel number */ 522 uint8_t iev_mode; /* CSA mode */ 523 uint8_t iev_count; /* CSA count */ 524}; 525 526struct ieee80211_cac_event { 527 uint32_t iev_flags; /* channel flags */ 528 uint16_t iev_freq; /* setting in Mhz */ 529 uint8_t iev_ieee; /* IEEE channel number */ 530 /* XXX timestamp? */ 531 uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */ 532}; 533 534struct ieee80211_radar_event { 535 uint32_t iev_flags; /* channel flags */ 536 uint16_t iev_freq; /* setting in Mhz */ 537 uint8_t iev_ieee; /* IEEE channel number */ 538 /* XXX timestamp? */ 539}; 540 541struct ieee80211_auth_event { 542 uint8_t iev_addr[6]; 543}; 544 545struct ieee80211_deauth_event { 546 uint8_t iev_addr[6]; 547}; 548 549struct ieee80211_country_event { 550 uint8_t iev_addr[6]; 551 uint8_t iev_cc[2]; /* ISO country code */ 552}; 553 554struct ieee80211_radio_event { 555 uint8_t iev_state; /* 1 on, 0 off */ 556}; 557 558#define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */ 559#define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */ 560#define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */ 561#define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */ 562#define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */ 563#define RTM_IEEE80211_SCAN 105 /* scan complete, results available */ 564#define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */ 565#define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */ 566#define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */ 567#define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */ 568#define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */ 569#define RTM_IEEE80211_RADAR 111 /* radar event */ 570#define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */ 571#define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */ 572#define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */ 573#define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */ 574#define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */ 575 576/* 577 * Structure prepended to raw packets sent through the bpf 578 * interface when set to DLT_IEEE802_11_RADIO. This allows 579 * user applications to specify pretty much everything in 580 * an Atheros tx descriptor. XXX need to generalize. 581 * 582 * XXX cannot be more than 14 bytes as it is copied to a sockaddr's 583 * XXX sa_data area. 584 */ 585struct ieee80211_bpf_params { 586 uint8_t ibp_vers; /* version */ 587#define IEEE80211_BPF_VERSION 0 588 uint8_t ibp_len; /* header length in bytes */ 589 uint8_t ibp_flags; 590#define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */ 591#define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */ 592#define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */ 593#define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */ 594#define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */ 595#define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */ 596#define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */ 597 uint8_t ibp_pri; /* WME/WMM AC+tx antenna */ 598 uint8_t ibp_try0; /* series 1 try count */ 599 uint8_t ibp_rate0; /* series 1 IEEE tx rate */ 600 uint8_t ibp_power; /* tx power (device units) */ 601 uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */ 602 uint8_t ibp_try1; /* series 2 try count */ 603 uint8_t ibp_rate1; /* series 2 IEEE tx rate */ 604 uint8_t ibp_try2; /* series 3 try count */ 605 uint8_t ibp_rate2; /* series 3 IEEE tx rate */ 606 uint8_t ibp_try3; /* series 4 try count */ 607 uint8_t ibp_rate3; /* series 4 IEEE tx rate */ 608}; 609 610/* 611 * Malloc API. Other BSD operating systems have slightly 612 * different malloc/free namings (eg DragonflyBSD.) 613 */ 614#define IEEE80211_MALLOC malloc 615#define IEEE80211_FREE free 616 617/* XXX TODO: get rid of WAITOK, fix all the users of it? */ 618#define IEEE80211_M_NOWAIT M_NOWAIT 619#define IEEE80211_M_WAITOK M_WAITOK 620#define IEEE80211_M_ZERO M_ZERO 621 622/* XXX TODO: the type fields */ 623 624#endif /* _NET80211_IEEE80211_FREEBSD_H_ */ 625