npx.c revision 159027
1/*- 2 * Copyright (c) 1990 William Jolitz. 3 * Copyright (c) 1991 The Regents of the University of California. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 4. Neither the name of the University nor the names of its contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * from: @(#)npx.c 7.2 (Berkeley) 5/12/91 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/i386/isa/npx.c 159027 2006-05-29 02:58:37Z davidxu $"); 35 36#include "opt_cpu.h" 37#include "opt_isa.h" 38#include "opt_npx.h" 39 40#include <sys/param.h> 41#include <sys/systm.h> 42#include <sys/bus.h> 43#include <sys/kernel.h> 44#include <sys/lock.h> 45#include <sys/malloc.h> 46#include <sys/module.h> 47#include <sys/mutex.h> 48#include <sys/mutex.h> 49#include <sys/proc.h> 50#include <sys/smp.h> 51#include <sys/sysctl.h> 52#include <machine/bus.h> 53#include <sys/rman.h> 54#ifdef NPX_DEBUG 55#include <sys/syslog.h> 56#endif 57#include <sys/signalvar.h> 58 59#include <machine/asmacros.h> 60#include <machine/cputypes.h> 61#include <machine/frame.h> 62#include <machine/md_var.h> 63#include <machine/pcb.h> 64#include <machine/psl.h> 65#include <machine/resource.h> 66#include <machine/specialreg.h> 67#include <machine/segments.h> 68#include <machine/ucontext.h> 69 70#include <machine/intr_machdep.h> 71#ifdef DEV_ISA 72#include <isa/isavar.h> 73#endif 74 75#if !defined(CPU_DISABLE_SSE) && defined(I686_CPU) 76#define CPU_ENABLE_SSE 77#endif 78 79/* 80 * 387 and 287 Numeric Coprocessor Extension (NPX) Driver. 81 */ 82 83/* Configuration flags. */ 84#define NPX_DISABLE_I586_OPTIMIZED_BCOPY (1 << 0) 85#define NPX_DISABLE_I586_OPTIMIZED_BZERO (1 << 1) 86#define NPX_DISABLE_I586_OPTIMIZED_COPYIO (1 << 2) 87 88#if defined(__GNUCLIKE_ASM) && !defined(lint) 89 90#define fldcw(addr) __asm("fldcw %0" : : "m" (*(addr))) 91#define fnclex() __asm("fnclex") 92#define fninit() __asm("fninit") 93#define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr))) 94#define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr))) 95#define fnstsw(addr) __asm __volatile("fnstsw %0" : "=m" (*(addr))) 96#define fp_divide_by_0() __asm("fldz; fld1; fdiv %st,%st(1); fnop") 97#define frstor(addr) __asm("frstor %0" : : "m" (*(addr))) 98#ifdef CPU_ENABLE_SSE 99#define fxrstor(addr) __asm("fxrstor %0" : : "m" (*(addr))) 100#define fxsave(addr) __asm __volatile("fxsave %0" : "=m" (*(addr))) 101#define ldmxcsr(__csr) __asm __volatile("ldmxcsr %0" : : "m" (__csr)) 102#endif 103#define start_emulating() __asm("smsw %%ax; orb %0,%%al; lmsw %%ax" \ 104 : : "n" (CR0_TS) : "ax") 105#define stop_emulating() __asm("clts") 106 107#else /* !(__GNUCLIKE_ASM && !lint) */ 108 109void fldcw(caddr_t addr); 110void fnclex(void); 111void fninit(void); 112void fnsave(caddr_t addr); 113void fnstcw(caddr_t addr); 114void fnstsw(caddr_t addr); 115void fp_divide_by_0(void); 116void frstor(caddr_t addr); 117#ifdef CPU_ENABLE_SSE 118void fxsave(caddr_t addr); 119void fxrstor(caddr_t addr); 120#endif 121void start_emulating(void); 122void stop_emulating(void); 123 124#endif /* __GNUCLIKE_ASM && !lint */ 125 126#ifdef CPU_ENABLE_SSE 127#define GET_FPU_CW(thread) \ 128 (cpu_fxsr ? \ 129 (thread)->td_pcb->pcb_save.sv_xmm.sv_env.en_cw : \ 130 (thread)->td_pcb->pcb_save.sv_87.sv_env.en_cw) 131#define GET_FPU_SW(thread) \ 132 (cpu_fxsr ? \ 133 (thread)->td_pcb->pcb_save.sv_xmm.sv_env.en_sw : \ 134 (thread)->td_pcb->pcb_save.sv_87.sv_env.en_sw) 135#else /* CPU_ENABLE_SSE */ 136#define GET_FPU_CW(thread) \ 137 (thread->td_pcb->pcb_save.sv_87.sv_env.en_cw) 138#define GET_FPU_SW(thread) \ 139 (thread->td_pcb->pcb_save.sv_87.sv_env.en_sw) 140#endif /* CPU_ENABLE_SSE */ 141 142typedef u_char bool_t; 143 144#ifdef CPU_ENABLE_SSE 145static void fpu_clean_state(void); 146#endif 147 148static void fpusave(union savefpu *); 149static void fpurstor(union savefpu *); 150static int npx_attach(device_t dev); 151static void npx_identify(driver_t *driver, device_t parent); 152static void npx_intr(void *); 153static int npx_probe(device_t dev); 154#ifdef I586_CPU_XXX 155static long timezero(const char *funcname, 156 void (*func)(void *buf, size_t len)); 157#endif /* I586_CPU */ 158 159int hw_float; /* XXX currently just alias for npx_exists */ 160 161SYSCTL_INT(_hw,HW_FLOATINGPT, floatingpoint, 162 CTLFLAG_RD, &hw_float, 0, 163 "Floatingpoint instructions executed in hardware"); 164 165static volatile u_int npx_intrs_while_probing; 166static volatile u_int npx_traps_while_probing; 167 168static union savefpu npx_cleanstate; 169static bool_t npx_cleanstate_ready; 170static bool_t npx_ex16; 171static bool_t npx_exists; 172static bool_t npx_irq13; 173 174alias_for_inthand_t probetrap; 175__asm(" \n\ 176 .text \n\ 177 .p2align 2,0x90 \n\ 178 .type " __XSTRING(CNAME(probetrap)) ",@function \n\ 179" __XSTRING(CNAME(probetrap)) ": \n\ 180 ss \n\ 181 incl " __XSTRING(CNAME(npx_traps_while_probing)) " \n\ 182 fnclex \n\ 183 iret \n\ 184"); 185 186/* 187 * Identify routine. Create a connection point on our parent for probing. 188 */ 189static void 190npx_identify(driver, parent) 191 driver_t *driver; 192 device_t parent; 193{ 194 device_t child; 195 196 child = BUS_ADD_CHILD(parent, 0, "npx", 0); 197 if (child == NULL) 198 panic("npx_identify"); 199} 200 201/* 202 * Do minimal handling of npx interrupts to convert them to traps. 203 */ 204static void 205npx_intr(dummy) 206 void *dummy; 207{ 208 struct thread *td; 209 210 npx_intrs_while_probing++; 211 212 /* 213 * The BUSY# latch must be cleared in all cases so that the next 214 * unmasked npx exception causes an interrupt. 215 */ 216 outb(IO_NPX, 0); 217 218 /* 219 * fpcurthread is normally non-null here. In that case, schedule an 220 * AST to finish the exception handling in the correct context 221 * (this interrupt may occur after the thread has entered the 222 * kernel via a syscall or an interrupt). Otherwise, the npx 223 * state of the thread that caused this interrupt must have been 224 * pushed to the thread's pcb, and clearing of the busy latch 225 * above has finished the (essentially null) handling of this 226 * interrupt. Control will eventually return to the instruction 227 * that caused it and it will repeat. We will eventually (usually 228 * soon) win the race to handle the interrupt properly. 229 */ 230 td = PCPU_GET(fpcurthread); 231 if (td != NULL) { 232 td->td_pcb->pcb_flags |= PCB_NPXTRAP; 233 mtx_lock_spin(&sched_lock); 234 td->td_flags |= TDF_ASTPENDING; 235 mtx_unlock_spin(&sched_lock); 236 } 237} 238 239/* 240 * Probe routine. Set flags to tell npxattach() what to do. Set up an 241 * interrupt handler if npx needs to use interrupts. 242 */ 243static int 244npx_probe(dev) 245 device_t dev; 246{ 247 struct gate_descriptor save_idt_npxtrap; 248 struct resource *ioport_res, *irq_res; 249 void *irq_cookie; 250 int ioport_rid, irq_num, irq_rid; 251 u_short control; 252 u_short status; 253 254 device_set_desc(dev, "math processor"); 255 256 /* 257 * Modern CPUs all have an FPU that uses the INT16 interface 258 * and provide a simple way to verify that, so handle the 259 * common case right away. 260 */ 261 if (cpu_feature & CPUID_FPU) { 262 hw_float = npx_exists = 1; 263 npx_ex16 = 1; 264 device_quiet(dev); 265 return (0); 266 } 267 268 save_idt_npxtrap = idt[IDT_MF]; 269 setidt(IDT_MF, probetrap, SDT_SYS386TGT, SEL_KPL, 270 GSEL(GCODE_SEL, SEL_KPL)); 271 ioport_rid = 0; 272 ioport_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &ioport_rid, 273 IO_NPX, IO_NPX + IO_NPXSIZE - 1, IO_NPXSIZE, RF_ACTIVE); 274 if (ioport_res == NULL) 275 panic("npx: can't get ports"); 276 if (resource_int_value("npx", 0, "irq", &irq_num) != 0) 277 irq_num = IRQ_NPX; 278 irq_rid = 0; 279 irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &irq_rid, irq_num, 280 irq_num, 1, RF_ACTIVE); 281 if (irq_res != NULL) { 282 if (bus_setup_intr(dev, irq_res, INTR_TYPE_MISC | INTR_FAST, 283 npx_intr, NULL, &irq_cookie) != 0) 284 panic("npx: can't create intr"); 285 } 286 287 /* 288 * Partially reset the coprocessor, if any. Some BIOS's don't reset 289 * it after a warm boot. 290 */ 291 npx_full_reset(); 292 outb(IO_NPX, 0); 293 294 /* 295 * Don't trap while we're probing. 296 */ 297 stop_emulating(); 298 299 /* 300 * Finish resetting the coprocessor, if any. If there is an error 301 * pending, then we may get a bogus IRQ13, but npx_intr() will handle 302 * it OK. Bogus halts have never been observed, but we enabled 303 * IRQ13 and cleared the BUSY# latch early to handle them anyway. 304 */ 305 fninit(); 306 307 /* 308 * Don't use fwait here because it might hang. 309 * Don't use fnop here because it usually hangs if there is no FPU. 310 */ 311 DELAY(1000); /* wait for any IRQ13 */ 312#ifdef DIAGNOSTIC 313 if (npx_intrs_while_probing != 0) 314 printf("fninit caused %u bogus npx interrupt(s)\n", 315 npx_intrs_while_probing); 316 if (npx_traps_while_probing != 0) 317 printf("fninit caused %u bogus npx trap(s)\n", 318 npx_traps_while_probing); 319#endif 320 /* 321 * Check for a status of mostly zero. 322 */ 323 status = 0x5a5a; 324 fnstsw(&status); 325 if ((status & 0xb8ff) == 0) { 326 /* 327 * Good, now check for a proper control word. 328 */ 329 control = 0x5a5a; 330 fnstcw(&control); 331 if ((control & 0x1f3f) == 0x033f) { 332 hw_float = npx_exists = 1; 333 /* 334 * We have an npx, now divide by 0 to see if exception 335 * 16 works. 336 */ 337 control &= ~(1 << 2); /* enable divide by 0 trap */ 338 fldcw(&control); 339#ifdef FPU_ERROR_BROKEN 340 /* 341 * FPU error signal doesn't work on some CPU 342 * accelerator board. 343 */ 344 npx_ex16 = 1; 345 return (0); 346#endif 347 npx_traps_while_probing = npx_intrs_while_probing = 0; 348 fp_divide_by_0(); 349 DELAY(1000); /* wait for any IRQ13 */ 350 if (npx_traps_while_probing != 0) { 351 /* 352 * Good, exception 16 works. 353 */ 354 npx_ex16 = 1; 355 goto no_irq13; 356 } 357 if (npx_intrs_while_probing != 0) { 358 /* 359 * Bad, we are stuck with IRQ13. 360 */ 361 npx_irq13 = 1; 362 idt[IDT_MF] = save_idt_npxtrap; 363#ifdef SMP 364 if (mp_ncpus > 1) 365 panic("npx0 cannot use IRQ 13 on an SMP system"); 366#endif 367 return (0); 368 } 369 /* 370 * Worse, even IRQ13 is broken. Use emulator. 371 */ 372 } 373 } 374 /* 375 * Probe failed, but we want to get to npxattach to initialize the 376 * emulator and say that it has been installed. XXX handle devices 377 * that aren't really devices better. 378 */ 379#ifdef SMP 380 if (mp_ncpus > 1) 381 panic("npx0 cannot be emulated on an SMP system"); 382#endif 383 /* FALLTHROUGH */ 384no_irq13: 385 idt[IDT_MF] = save_idt_npxtrap; 386 if (irq_res != NULL) { 387 bus_teardown_intr(dev, irq_res, irq_cookie); 388 bus_release_resource(dev, SYS_RES_IRQ, irq_rid, irq_res); 389 } 390 bus_release_resource(dev, SYS_RES_IOPORT, ioport_rid, ioport_res); 391 return (0); 392} 393 394/* 395 * Attach routine - announce which it is, and wire into system 396 */ 397static int 398npx_attach(dev) 399 device_t dev; 400{ 401 int flags; 402 register_t s; 403 404 flags = device_get_flags(dev); 405 406 if (npx_irq13) 407 device_printf(dev, "IRQ 13 interface\n"); 408 else if (!npx_ex16) 409 device_printf(dev, "WARNING: no FPU!\n"); 410 else if (!device_is_quiet(dev) || bootverbose) 411 device_printf(dev, "INT 16 interface\n"); 412 413 npxinit(__INITIAL_NPXCW__); 414 415 if (npx_cleanstate_ready == 0) { 416 s = intr_disable(); 417 stop_emulating(); 418 fpusave(&npx_cleanstate); 419 start_emulating(); 420 npx_cleanstate_ready = 1; 421 intr_restore(s); 422 } 423#ifdef I586_CPU_XXX 424 if (cpu_class == CPUCLASS_586 && npx_ex16 && npx_exists && 425 timezero("i586_bzero()", i586_bzero) < 426 timezero("bzero()", bzero) * 4 / 5) { 427 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BCOPY)) 428 bcopy_vector = i586_bcopy; 429 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BZERO)) 430 bzero_vector = i586_bzero; 431 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_COPYIO)) { 432 copyin_vector = i586_copyin; 433 copyout_vector = i586_copyout; 434 } 435 } 436#endif 437 438 return (0); /* XXX unused */ 439} 440 441/* 442 * Initialize floating point unit. 443 */ 444void 445npxinit(control) 446 u_short control; 447{ 448 static union savefpu dummy; 449 register_t savecrit; 450 451 if (!npx_exists) 452 return; 453 /* 454 * fninit has the same h/w bugs as fnsave. Use the detoxified 455 * fnsave to throw away any junk in the fpu. npxsave() initializes 456 * the fpu and sets fpcurthread = NULL as important side effects. 457 */ 458 savecrit = intr_disable(); 459 npxsave(&dummy); 460 stop_emulating(); 461#ifdef CPU_ENABLE_SSE 462 /* XXX npxsave() doesn't actually initialize the fpu in the SSE case. */ 463 if (cpu_fxsr) 464 fninit(); 465#endif 466 fldcw(&control); 467 start_emulating(); 468 intr_restore(savecrit); 469} 470 471/* 472 * Free coprocessor (if we have it). 473 */ 474void 475npxexit(td) 476 struct thread *td; 477{ 478 register_t savecrit; 479 480 savecrit = intr_disable(); 481 if (curthread == PCPU_GET(fpcurthread)) 482 npxsave(&PCPU_GET(curpcb)->pcb_save); 483 intr_restore(savecrit); 484#ifdef NPX_DEBUG 485 if (npx_exists) { 486 u_int masked_exceptions; 487 488 masked_exceptions = GET_FPU_CW(td) & GET_FPU_SW(td) & 0x7f; 489 /* 490 * Log exceptions that would have trapped with the old 491 * control word (overflow, divide by 0, and invalid operand). 492 */ 493 if (masked_exceptions & 0x0d) 494 log(LOG_ERR, 495 "pid %d (%s) exited with masked floating point exceptions 0x%02x\n", 496 td->td_proc->p_pid, td->td_proc->p_comm, 497 masked_exceptions); 498 } 499#endif 500} 501 502int 503npxformat() 504{ 505 506 if (!npx_exists) 507 return (_MC_FPFMT_NODEV); 508#ifdef CPU_ENABLE_SSE 509 if (cpu_fxsr) 510 return (_MC_FPFMT_XMM); 511#endif 512 return (_MC_FPFMT_387); 513} 514 515/* 516 * The following mechanism is used to ensure that the FPE_... value 517 * that is passed as a trapcode to the signal handler of the user 518 * process does not have more than one bit set. 519 * 520 * Multiple bits may be set if the user process modifies the control 521 * word while a status word bit is already set. While this is a sign 522 * of bad coding, we have no choise than to narrow them down to one 523 * bit, since we must not send a trapcode that is not exactly one of 524 * the FPE_ macros. 525 * 526 * The mechanism has a static table with 127 entries. Each combination 527 * of the 7 FPU status word exception bits directly translates to a 528 * position in this table, where a single FPE_... value is stored. 529 * This FPE_... value stored there is considered the "most important" 530 * of the exception bits and will be sent as the signal code. The 531 * precedence of the bits is based upon Intel Document "Numerical 532 * Applications", Chapter "Special Computational Situations". 533 * 534 * The macro to choose one of these values does these steps: 1) Throw 535 * away status word bits that cannot be masked. 2) Throw away the bits 536 * currently masked in the control word, assuming the user isn't 537 * interested in them anymore. 3) Reinsert status word bit 7 (stack 538 * fault) if it is set, which cannot be masked but must be presered. 539 * 4) Use the remaining bits to point into the trapcode table. 540 * 541 * The 6 maskable bits in order of their preference, as stated in the 542 * above referenced Intel manual: 543 * 1 Invalid operation (FP_X_INV) 544 * 1a Stack underflow 545 * 1b Stack overflow 546 * 1c Operand of unsupported format 547 * 1d SNaN operand. 548 * 2 QNaN operand (not an exception, irrelavant here) 549 * 3 Any other invalid-operation not mentioned above or zero divide 550 * (FP_X_INV, FP_X_DZ) 551 * 4 Denormal operand (FP_X_DNML) 552 * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL) 553 * 6 Inexact result (FP_X_IMP) 554 */ 555static char fpetable[128] = { 556 0, 557 FPE_FLTINV, /* 1 - INV */ 558 FPE_FLTUND, /* 2 - DNML */ 559 FPE_FLTINV, /* 3 - INV | DNML */ 560 FPE_FLTDIV, /* 4 - DZ */ 561 FPE_FLTINV, /* 5 - INV | DZ */ 562 FPE_FLTDIV, /* 6 - DNML | DZ */ 563 FPE_FLTINV, /* 7 - INV | DNML | DZ */ 564 FPE_FLTOVF, /* 8 - OFL */ 565 FPE_FLTINV, /* 9 - INV | OFL */ 566 FPE_FLTUND, /* A - DNML | OFL */ 567 FPE_FLTINV, /* B - INV | DNML | OFL */ 568 FPE_FLTDIV, /* C - DZ | OFL */ 569 FPE_FLTINV, /* D - INV | DZ | OFL */ 570 FPE_FLTDIV, /* E - DNML | DZ | OFL */ 571 FPE_FLTINV, /* F - INV | DNML | DZ | OFL */ 572 FPE_FLTUND, /* 10 - UFL */ 573 FPE_FLTINV, /* 11 - INV | UFL */ 574 FPE_FLTUND, /* 12 - DNML | UFL */ 575 FPE_FLTINV, /* 13 - INV | DNML | UFL */ 576 FPE_FLTDIV, /* 14 - DZ | UFL */ 577 FPE_FLTINV, /* 15 - INV | DZ | UFL */ 578 FPE_FLTDIV, /* 16 - DNML | DZ | UFL */ 579 FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */ 580 FPE_FLTOVF, /* 18 - OFL | UFL */ 581 FPE_FLTINV, /* 19 - INV | OFL | UFL */ 582 FPE_FLTUND, /* 1A - DNML | OFL | UFL */ 583 FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */ 584 FPE_FLTDIV, /* 1C - DZ | OFL | UFL */ 585 FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */ 586 FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */ 587 FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */ 588 FPE_FLTRES, /* 20 - IMP */ 589 FPE_FLTINV, /* 21 - INV | IMP */ 590 FPE_FLTUND, /* 22 - DNML | IMP */ 591 FPE_FLTINV, /* 23 - INV | DNML | IMP */ 592 FPE_FLTDIV, /* 24 - DZ | IMP */ 593 FPE_FLTINV, /* 25 - INV | DZ | IMP */ 594 FPE_FLTDIV, /* 26 - DNML | DZ | IMP */ 595 FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */ 596 FPE_FLTOVF, /* 28 - OFL | IMP */ 597 FPE_FLTINV, /* 29 - INV | OFL | IMP */ 598 FPE_FLTUND, /* 2A - DNML | OFL | IMP */ 599 FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */ 600 FPE_FLTDIV, /* 2C - DZ | OFL | IMP */ 601 FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */ 602 FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */ 603 FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */ 604 FPE_FLTUND, /* 30 - UFL | IMP */ 605 FPE_FLTINV, /* 31 - INV | UFL | IMP */ 606 FPE_FLTUND, /* 32 - DNML | UFL | IMP */ 607 FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */ 608 FPE_FLTDIV, /* 34 - DZ | UFL | IMP */ 609 FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */ 610 FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */ 611 FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */ 612 FPE_FLTOVF, /* 38 - OFL | UFL | IMP */ 613 FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */ 614 FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */ 615 FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */ 616 FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */ 617 FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */ 618 FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */ 619 FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */ 620 FPE_FLTSUB, /* 40 - STK */ 621 FPE_FLTSUB, /* 41 - INV | STK */ 622 FPE_FLTUND, /* 42 - DNML | STK */ 623 FPE_FLTSUB, /* 43 - INV | DNML | STK */ 624 FPE_FLTDIV, /* 44 - DZ | STK */ 625 FPE_FLTSUB, /* 45 - INV | DZ | STK */ 626 FPE_FLTDIV, /* 46 - DNML | DZ | STK */ 627 FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */ 628 FPE_FLTOVF, /* 48 - OFL | STK */ 629 FPE_FLTSUB, /* 49 - INV | OFL | STK */ 630 FPE_FLTUND, /* 4A - DNML | OFL | STK */ 631 FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */ 632 FPE_FLTDIV, /* 4C - DZ | OFL | STK */ 633 FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */ 634 FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */ 635 FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */ 636 FPE_FLTUND, /* 50 - UFL | STK */ 637 FPE_FLTSUB, /* 51 - INV | UFL | STK */ 638 FPE_FLTUND, /* 52 - DNML | UFL | STK */ 639 FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */ 640 FPE_FLTDIV, /* 54 - DZ | UFL | STK */ 641 FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */ 642 FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */ 643 FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */ 644 FPE_FLTOVF, /* 58 - OFL | UFL | STK */ 645 FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */ 646 FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */ 647 FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */ 648 FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */ 649 FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */ 650 FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */ 651 FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */ 652 FPE_FLTRES, /* 60 - IMP | STK */ 653 FPE_FLTSUB, /* 61 - INV | IMP | STK */ 654 FPE_FLTUND, /* 62 - DNML | IMP | STK */ 655 FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */ 656 FPE_FLTDIV, /* 64 - DZ | IMP | STK */ 657 FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */ 658 FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */ 659 FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */ 660 FPE_FLTOVF, /* 68 - OFL | IMP | STK */ 661 FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */ 662 FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */ 663 FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */ 664 FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */ 665 FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */ 666 FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */ 667 FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */ 668 FPE_FLTUND, /* 70 - UFL | IMP | STK */ 669 FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */ 670 FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */ 671 FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */ 672 FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */ 673 FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */ 674 FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */ 675 FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */ 676 FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */ 677 FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */ 678 FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */ 679 FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */ 680 FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */ 681 FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */ 682 FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */ 683 FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */ 684}; 685 686/* 687 * Preserve the FP status word, clear FP exceptions, then generate a SIGFPE. 688 * 689 * Clearing exceptions is necessary mainly to avoid IRQ13 bugs. We now 690 * depend on longjmp() restoring a usable state. Restoring the state 691 * or examining it might fail if we didn't clear exceptions. 692 * 693 * The error code chosen will be one of the FPE_... macros. It will be 694 * sent as the second argument to old BSD-style signal handlers and as 695 * "siginfo_t->si_code" (second argument) to SA_SIGINFO signal handlers. 696 * 697 * XXX the FP state is not preserved across signal handlers. So signal 698 * handlers cannot afford to do FP unless they preserve the state or 699 * longjmp() out. Both preserving the state and longjmp()ing may be 700 * destroyed by IRQ13 bugs. Clearing FP exceptions is not an acceptable 701 * solution for signals other than SIGFPE. 702 */ 703int 704npxtrap() 705{ 706 register_t savecrit; 707 u_short control, status; 708 709 if (!npx_exists) { 710 printf("npxtrap: fpcurthread = %p, curthread = %p, npx_exists = %d\n", 711 PCPU_GET(fpcurthread), curthread, npx_exists); 712 panic("npxtrap from nowhere"); 713 } 714 savecrit = intr_disable(); 715 716 /* 717 * Interrupt handling (for another interrupt) may have pushed the 718 * state to memory. Fetch the relevant parts of the state from 719 * wherever they are. 720 */ 721 if (PCPU_GET(fpcurthread) != curthread) { 722 control = GET_FPU_CW(curthread); 723 status = GET_FPU_SW(curthread); 724 } else { 725 fnstcw(&control); 726 fnstsw(&status); 727 } 728 729 if (PCPU_GET(fpcurthread) == curthread) 730 fnclex(); 731 intr_restore(savecrit); 732 return (fpetable[status & ((~control & 0x3f) | 0x40)]); 733} 734 735/* 736 * Implement device not available (DNA) exception 737 * 738 * It would be better to switch FP context here (if curthread != fpcurthread) 739 * and not necessarily for every context switch, but it is too hard to 740 * access foreign pcb's. 741 */ 742 743static int err_count = 0; 744 745int 746npxdna() 747{ 748 struct pcb *pcb; 749 register_t s; 750#ifdef CPU_ENABLE_SSE 751 int mxcsr; 752#endif 753 u_short control; 754 755 if (!npx_exists) 756 return (0); 757 if (PCPU_GET(fpcurthread) == curthread) { 758 printf("npxdna: fpcurthread == curthread %d times\n", 759 ++err_count); 760 stop_emulating(); 761 return (1); 762 } 763 if (PCPU_GET(fpcurthread) != NULL) { 764 printf("npxdna: fpcurthread = %p (%d), curthread = %p (%d)\n", 765 PCPU_GET(fpcurthread), 766 PCPU_GET(fpcurthread)->td_proc->p_pid, 767 curthread, curthread->td_proc->p_pid); 768 panic("npxdna"); 769 } 770 s = intr_disable(); 771 stop_emulating(); 772 /* 773 * Record new context early in case frstor causes an IRQ13. 774 */ 775 PCPU_SET(fpcurthread, curthread); 776 pcb = PCPU_GET(curpcb); 777 778 if ((pcb->pcb_flags & PCB_NPXINITDONE) == 0) { 779 /* 780 * This is the first time this thread has used the FPU or 781 * the PCB doesn't contain a clean FPU state. Explicitly 782 * initialize the FPU and load the default control word. 783 */ 784 fninit(); 785 control = __INITIAL_NPXCW__; 786 fldcw(&control); 787#ifdef CPU_ENABLE_SSE 788 if (cpu_fxsr) { 789 mxcsr = __INITIAL_MXCSR__; 790 ldmxcsr(mxcsr); 791 } 792#endif 793 pcb->pcb_flags |= PCB_NPXINITDONE; 794 } else { 795 /* 796 * The following frstor may cause an IRQ13 when the state 797 * being restored has a pending error. The error will 798 * appear to have been triggered by the current (npx) user 799 * instruction even when that instruction is a no-wait 800 * instruction that should not trigger an error (e.g., 801 * fnclex). On at least one 486 system all of the no-wait 802 * instructions are broken the same as frstor, so our 803 * treatment does not amplify the breakage. On at least 804 * one 386/Cyrix 387 system, fnclex works correctly while 805 * frstor and fnsave are broken, so our treatment breaks 806 * fnclex if it is the first FPU instruction after a context 807 * switch. 808 */ 809 fpurstor(&pcb->pcb_save); 810 } 811 intr_restore(s); 812 813 return (1); 814} 815 816/* 817 * Wrapper for fnsave instruction, partly to handle hardware bugs. When npx 818 * exceptions are reported via IRQ13, spurious IRQ13's may be triggered by 819 * no-wait npx instructions. See the Intel application note AP-578 for 820 * details. This doesn't cause any additional complications here. IRQ13's 821 * are inherently asynchronous unless the CPU is frozen to deliver them -- 822 * one that started in userland may be delivered many instructions later, 823 * after the process has entered the kernel. It may even be delivered after 824 * the fnsave here completes. A spurious IRQ13 for the fnsave is handled in 825 * the same way as a very-late-arriving non-spurious IRQ13 from user mode: 826 * it is normally ignored at first because we set fpcurthread to NULL; it is 827 * normally retriggered in npxdna() after return to user mode. 828 * 829 * npxsave() must be called with interrupts disabled, so that it clears 830 * fpcurthread atomically with saving the state. We require callers to do the 831 * disabling, since most callers need to disable interrupts anyway to call 832 * npxsave() atomically with checking fpcurthread. 833 * 834 * A previous version of npxsave() went to great lengths to excecute fnsave 835 * with interrupts enabled in case executing it froze the CPU. This case 836 * can't happen, at least for Intel CPU/NPX's. Spurious IRQ13's don't imply 837 * spurious freezes. 838 */ 839void 840npxsave(addr) 841 union savefpu *addr; 842{ 843 844 stop_emulating(); 845 fpusave(addr); 846 847 start_emulating(); 848 PCPU_SET(fpcurthread, NULL); 849} 850 851/* 852 * This should be called with interrupts disabled and only when the owning 853 * FPU thread is non-null. 854 */ 855void 856npxdrop() 857{ 858 struct thread *td; 859 860 /* 861 * Discard pending exceptions in the !cpu_fxsr case so that unmasked 862 * ones don't cause a panic on the next frstor. 863 */ 864#ifdef CPU_ENABLE_SSE 865 if (!cpu_fxsr) 866#endif 867 fnclex(); 868 869 td = PCPU_GET(fpcurthread); 870 PCPU_SET(fpcurthread, NULL); 871 td->td_pcb->pcb_flags &= ~PCB_NPXINITDONE; 872 start_emulating(); 873} 874 875/* 876 * Get the state of the FPU without dropping ownership (if possible). 877 * It returns the FPU ownership status. 878 */ 879int 880npxgetregs(td, addr) 881 struct thread *td; 882 union savefpu *addr; 883{ 884 register_t s; 885 886 if (!npx_exists) 887 return (_MC_FPOWNED_NONE); 888 889 if ((td->td_pcb->pcb_flags & PCB_NPXINITDONE) == 0) { 890 if (npx_cleanstate_ready) 891 bcopy(&npx_cleanstate, addr, sizeof(npx_cleanstate)); 892 else 893 bzero(addr, sizeof(*addr)); 894 return (_MC_FPOWNED_NONE); 895 } 896 s = intr_disable(); 897 if (td == PCPU_GET(fpcurthread)) { 898 fpusave(addr); 899#ifdef CPU_ENABLE_SSE 900 if (!cpu_fxsr) 901#endif 902 /* 903 * fnsave initializes the FPU and destroys whatever 904 * context it contains. Make sure the FPU owner 905 * starts with a clean state next time. 906 */ 907 npxdrop(); 908 intr_restore(s); 909 return (_MC_FPOWNED_FPU); 910 } else { 911 intr_restore(s); 912 bcopy(&td->td_pcb->pcb_save, addr, sizeof(*addr)); 913 return (_MC_FPOWNED_PCB); 914 } 915} 916 917/* 918 * Set the state of the FPU. 919 */ 920void 921npxsetregs(td, addr) 922 struct thread *td; 923 union savefpu *addr; 924{ 925 register_t s; 926 927 if (!npx_exists) 928 return; 929 930 s = intr_disable(); 931 if (td == PCPU_GET(fpcurthread)) { 932#ifdef CPU_ENABLE_SSE 933 if (!cpu_fxsr) 934#endif 935 fnclex(); /* As in npxdrop(). */ 936 fpurstor(addr); 937 intr_restore(s); 938 } else { 939 intr_restore(s); 940 bcopy(addr, &td->td_pcb->pcb_save, sizeof(*addr)); 941 } 942 curthread->td_pcb->pcb_flags |= PCB_NPXINITDONE; 943} 944 945static void 946fpusave(addr) 947 union savefpu *addr; 948{ 949 950#ifdef CPU_ENABLE_SSE 951 if (cpu_fxsr) 952 fxsave(addr); 953 else 954#endif 955 fnsave(addr); 956} 957 958#ifdef CPU_ENABLE_SSE 959/* 960 * On AuthenticAMD processors, the fxrstor instruction does not restore 961 * the x87's stored last instruction pointer, last data pointer, and last 962 * opcode values, except in the rare case in which the exception summary 963 * (ES) bit in the x87 status word is set to 1. 964 * 965 * In order to avoid leaking this information across processes, we clean 966 * these values by performing a dummy load before executing fxrstor(). 967 */ 968static double dummy_variable = 0.0; 969static void 970fpu_clean_state(void) 971{ 972 u_short status; 973 974 /* 975 * Clear the ES bit in the x87 status word if it is currently 976 * set, in order to avoid causing a fault in the upcoming load. 977 */ 978 fnstsw(&status); 979 if (status & 0x80) 980 fnclex(); 981 982 /* 983 * Load the dummy variable into the x87 stack. This mangles 984 * the x87 stack, but we don't care since we're about to call 985 * fxrstor() anyway. 986 */ 987 __asm __volatile("ffree %%st(7); fld %0" : : "m" (dummy_variable)); 988} 989#endif /* CPU_ENABLE_SSE */ 990 991static void 992fpurstor(addr) 993 union savefpu *addr; 994{ 995 996#ifdef CPU_ENABLE_SSE 997 if (cpu_fxsr) { 998 fpu_clean_state(); 999 fxrstor(addr); 1000 } else 1001#endif 1002 frstor(addr); 1003} 1004 1005#ifdef I586_CPU_XXX 1006static long 1007timezero(funcname, func) 1008 const char *funcname; 1009 void (*func)(void *buf, size_t len); 1010 1011{ 1012 void *buf; 1013#define BUFSIZE 1048576 1014 long usec; 1015 struct timeval finish, start; 1016 1017 buf = malloc(BUFSIZE, M_TEMP, M_NOWAIT); 1018 if (buf == NULL) 1019 return (BUFSIZE); 1020 microtime(&start); 1021 (*func)(buf, BUFSIZE); 1022 microtime(&finish); 1023 usec = 1000000 * (finish.tv_sec - start.tv_sec) + 1024 finish.tv_usec - start.tv_usec; 1025 if (usec <= 0) 1026 usec = 1; 1027 if (bootverbose) 1028 printf("%s bandwidth = %u kBps\n", funcname, 1029 (u_int32_t)(((BUFSIZE >> 10) * 1000000) / usec)); 1030 free(buf, M_TEMP); 1031 return (usec); 1032} 1033#endif /* I586_CPU */ 1034 1035static device_method_t npx_methods[] = { 1036 /* Device interface */ 1037 DEVMETHOD(device_identify, npx_identify), 1038 DEVMETHOD(device_probe, npx_probe), 1039 DEVMETHOD(device_attach, npx_attach), 1040 DEVMETHOD(device_detach, bus_generic_detach), 1041 DEVMETHOD(device_shutdown, bus_generic_shutdown), 1042 DEVMETHOD(device_suspend, bus_generic_suspend), 1043 DEVMETHOD(device_resume, bus_generic_resume), 1044 1045 { 0, 0 } 1046}; 1047 1048static driver_t npx_driver = { 1049 "npx", 1050 npx_methods, 1051 1, /* no softc */ 1052}; 1053 1054static devclass_t npx_devclass; 1055 1056/* 1057 * We prefer to attach to the root nexus so that the usual case (exception 16) 1058 * doesn't describe the processor as being `on isa'. 1059 */ 1060DRIVER_MODULE(npx, nexus, npx_driver, npx_devclass, 0, 0); 1061 1062#ifdef DEV_ISA 1063/* 1064 * This sucks up the legacy ISA support assignments from PNPBIOS/ACPI. 1065 */ 1066static struct isa_pnp_id npxisa_ids[] = { 1067 { 0x040cd041, "Legacy ISA coprocessor support" }, /* PNP0C04 */ 1068 { 0 } 1069}; 1070 1071static int 1072npxisa_probe(device_t dev) 1073{ 1074 int result; 1075 if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, npxisa_ids)) <= 0) { 1076 device_quiet(dev); 1077 } 1078 return(result); 1079} 1080 1081static int 1082npxisa_attach(device_t dev) 1083{ 1084 return (0); 1085} 1086 1087static device_method_t npxisa_methods[] = { 1088 /* Device interface */ 1089 DEVMETHOD(device_probe, npxisa_probe), 1090 DEVMETHOD(device_attach, npxisa_attach), 1091 DEVMETHOD(device_detach, bus_generic_detach), 1092 DEVMETHOD(device_shutdown, bus_generic_shutdown), 1093 DEVMETHOD(device_suspend, bus_generic_suspend), 1094 DEVMETHOD(device_resume, bus_generic_resume), 1095 1096 { 0, 0 } 1097}; 1098 1099static driver_t npxisa_driver = { 1100 "npxisa", 1101 npxisa_methods, 1102 1, /* no softc */ 1103}; 1104 1105static devclass_t npxisa_devclass; 1106 1107DRIVER_MODULE(npxisa, isa, npxisa_driver, npxisa_devclass, 0, 0); 1108#ifndef PC98 1109DRIVER_MODULE(npxisa, acpi, npxisa_driver, npxisa_devclass, 0, 0); 1110#endif 1111#endif /* DEV_ISA */ 1112