npx.c revision 153138
1/*- 2 * Copyright (c) 1990 William Jolitz. 3 * Copyright (c) 1991 The Regents of the University of California. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 4. Neither the name of the University nor the names of its contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * from: @(#)npx.c 7.2 (Berkeley) 5/12/91 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: head/sys/i386/isa/npx.c 153138 2005-12-05 22:11:44Z jhb $"); 35 36#include "opt_cpu.h" 37#include "opt_isa.h" 38#include "opt_npx.h" 39 40#include <sys/param.h> 41#include <sys/systm.h> 42#include <sys/bus.h> 43#include <sys/kernel.h> 44#include <sys/lock.h> 45#include <sys/malloc.h> 46#include <sys/module.h> 47#include <sys/mutex.h> 48#include <sys/mutex.h> 49#include <sys/proc.h> 50#include <sys/smp.h> 51#include <sys/sysctl.h> 52#include <machine/bus.h> 53#include <sys/rman.h> 54#ifdef NPX_DEBUG 55#include <sys/syslog.h> 56#endif 57#include <sys/signalvar.h> 58 59#include <machine/asmacros.h> 60#include <machine/cputypes.h> 61#include <machine/frame.h> 62#include <machine/md_var.h> 63#include <machine/pcb.h> 64#include <machine/psl.h> 65#include <machine/clock.h> 66#include <machine/resource.h> 67#include <machine/specialreg.h> 68#include <machine/segments.h> 69#include <machine/ucontext.h> 70 71#include <machine/intr_machdep.h> 72#ifdef DEV_ISA 73#include <isa/isavar.h> 74#endif 75 76#if !defined(CPU_DISABLE_SSE) && defined(I686_CPU) 77#define CPU_ENABLE_SSE 78#endif 79 80/* 81 * 387 and 287 Numeric Coprocessor Extension (NPX) Driver. 82 */ 83 84/* Configuration flags. */ 85#define NPX_DISABLE_I586_OPTIMIZED_BCOPY (1 << 0) 86#define NPX_DISABLE_I586_OPTIMIZED_BZERO (1 << 1) 87#define NPX_DISABLE_I586_OPTIMIZED_COPYIO (1 << 2) 88 89#if defined(__GNUCLIKE_ASM) && !defined(lint) 90 91#define fldcw(addr) __asm("fldcw %0" : : "m" (*(addr))) 92#define fnclex() __asm("fnclex") 93#define fninit() __asm("fninit") 94#define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr))) 95#define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr))) 96#define fnstsw(addr) __asm __volatile("fnstsw %0" : "=m" (*(addr))) 97#define fp_divide_by_0() __asm("fldz; fld1; fdiv %st,%st(1); fnop") 98#define frstor(addr) __asm("frstor %0" : : "m" (*(addr))) 99#ifdef CPU_ENABLE_SSE 100#define fxrstor(addr) __asm("fxrstor %0" : : "m" (*(addr))) 101#define fxsave(addr) __asm __volatile("fxsave %0" : "=m" (*(addr))) 102#define ldmxcsr(__csr) __asm __volatile("ldmxcsr %0" : : "m" (__csr)) 103#endif 104#define start_emulating() __asm("smsw %%ax; orb %0,%%al; lmsw %%ax" \ 105 : : "n" (CR0_TS) : "ax") 106#define stop_emulating() __asm("clts") 107 108#else /* !(__GNUCLIKE_ASM && !lint) */ 109 110void fldcw(caddr_t addr); 111void fnclex(void); 112void fninit(void); 113void fnsave(caddr_t addr); 114void fnstcw(caddr_t addr); 115void fnstsw(caddr_t addr); 116void fp_divide_by_0(void); 117void frstor(caddr_t addr); 118#ifdef CPU_ENABLE_SSE 119void fxsave(caddr_t addr); 120void fxrstor(caddr_t addr); 121#endif 122void start_emulating(void); 123void stop_emulating(void); 124 125#endif /* __GNUCLIKE_ASM && !lint */ 126 127#ifdef CPU_ENABLE_SSE 128#define GET_FPU_CW(thread) \ 129 (cpu_fxsr ? \ 130 (thread)->td_pcb->pcb_save.sv_xmm.sv_env.en_cw : \ 131 (thread)->td_pcb->pcb_save.sv_87.sv_env.en_cw) 132#define GET_FPU_SW(thread) \ 133 (cpu_fxsr ? \ 134 (thread)->td_pcb->pcb_save.sv_xmm.sv_env.en_sw : \ 135 (thread)->td_pcb->pcb_save.sv_87.sv_env.en_sw) 136#else /* CPU_ENABLE_SSE */ 137#define GET_FPU_CW(thread) \ 138 (thread->td_pcb->pcb_save.sv_87.sv_env.en_cw) 139#define GET_FPU_SW(thread) \ 140 (thread->td_pcb->pcb_save.sv_87.sv_env.en_sw) 141#endif /* CPU_ENABLE_SSE */ 142 143typedef u_char bool_t; 144 145static void fpusave(union savefpu *); 146static void fpurstor(union savefpu *); 147static int npx_attach(device_t dev); 148static void npx_identify(driver_t *driver, device_t parent); 149static void npx_intr(void *); 150static int npx_probe(device_t dev); 151#ifdef I586_CPU_XXX 152static long timezero(const char *funcname, 153 void (*func)(void *buf, size_t len)); 154#endif /* I586_CPU */ 155 156int hw_float; /* XXX currently just alias for npx_exists */ 157 158SYSCTL_INT(_hw,HW_FLOATINGPT, floatingpoint, 159 CTLFLAG_RD, &hw_float, 0, 160 "Floatingpoint instructions executed in hardware"); 161 162static volatile u_int npx_intrs_while_probing; 163static volatile u_int npx_traps_while_probing; 164 165static union savefpu npx_cleanstate; 166static bool_t npx_cleanstate_ready; 167static bool_t npx_ex16; 168static bool_t npx_exists; 169static bool_t npx_irq13; 170 171alias_for_inthand_t probetrap; 172__asm(" \n\ 173 .text \n\ 174 .p2align 2,0x90 \n\ 175 .type " __XSTRING(CNAME(probetrap)) ",@function \n\ 176" __XSTRING(CNAME(probetrap)) ": \n\ 177 ss \n\ 178 incl " __XSTRING(CNAME(npx_traps_while_probing)) " \n\ 179 fnclex \n\ 180 iret \n\ 181"); 182 183/* 184 * Identify routine. Create a connection point on our parent for probing. 185 */ 186static void 187npx_identify(driver, parent) 188 driver_t *driver; 189 device_t parent; 190{ 191 device_t child; 192 193 child = BUS_ADD_CHILD(parent, 0, "npx", 0); 194 if (child == NULL) 195 panic("npx_identify"); 196} 197 198/* 199 * Do minimal handling of npx interrupts to convert them to traps. 200 */ 201static void 202npx_intr(dummy) 203 void *dummy; 204{ 205 struct thread *td; 206 207 npx_intrs_while_probing++; 208 209 /* 210 * The BUSY# latch must be cleared in all cases so that the next 211 * unmasked npx exception causes an interrupt. 212 */ 213 outb(IO_NPX, 0); 214 215 /* 216 * fpcurthread is normally non-null here. In that case, schedule an 217 * AST to finish the exception handling in the correct context 218 * (this interrupt may occur after the thread has entered the 219 * kernel via a syscall or an interrupt). Otherwise, the npx 220 * state of the thread that caused this interrupt must have been 221 * pushed to the thread's pcb, and clearing of the busy latch 222 * above has finished the (essentially null) handling of this 223 * interrupt. Control will eventually return to the instruction 224 * that caused it and it will repeat. We will eventually (usually 225 * soon) win the race to handle the interrupt properly. 226 */ 227 td = PCPU_GET(fpcurthread); 228 if (td != NULL) { 229 td->td_pcb->pcb_flags |= PCB_NPXTRAP; 230 mtx_lock_spin(&sched_lock); 231 td->td_flags |= TDF_ASTPENDING; 232 mtx_unlock_spin(&sched_lock); 233 } 234} 235 236/* 237 * Probe routine. Initialize cr0 to give correct behaviour for [f]wait 238 * whether the device exists or not (XXX should be elsewhere). Set flags 239 * to tell npxattach() what to do. Modify device struct if npx doesn't 240 * need to use interrupts. Return 0 if device exists. 241 */ 242static int 243npx_probe(dev) 244 device_t dev; 245{ 246 struct gate_descriptor save_idt_npxtrap; 247 struct resource *ioport_res, *irq_res; 248 void *irq_cookie; 249 int ioport_rid, irq_num, irq_rid; 250 u_short control; 251 u_short status; 252 253 save_idt_npxtrap = idt[IDT_MF]; 254 setidt(IDT_MF, probetrap, SDT_SYS386TGT, SEL_KPL, 255 GSEL(GCODE_SEL, SEL_KPL)); 256 ioport_rid = 0; 257 ioport_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &ioport_rid, 258 IO_NPX, IO_NPX + IO_NPXSIZE - 1, IO_NPXSIZE, RF_ACTIVE); 259 if (ioport_res == NULL) 260 panic("npx: can't get ports"); 261 if (resource_int_value("npx", 0, "irq", &irq_num) != 0) 262 irq_num = IRQ_NPX; 263 irq_rid = 0; 264 irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &irq_rid, irq_num, 265 irq_num, 1, RF_ACTIVE); 266 if (irq_res != NULL) { 267 if (bus_setup_intr(dev, irq_res, INTR_TYPE_MISC | INTR_FAST, 268 npx_intr, NULL, &irq_cookie) != 0) 269 panic("npx: can't create intr"); 270 } 271 272 /* 273 * Partially reset the coprocessor, if any. Some BIOS's don't reset 274 * it after a warm boot. 275 */ 276 npx_full_reset(); 277 outb(IO_NPX, 0); 278 279 /* 280 * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT 281 * instructions. We must set the CR0_MP bit and use the CR0_TS 282 * bit to control the trap, because setting the CR0_EM bit does 283 * not cause WAIT instructions to trap. It's important to trap 284 * WAIT instructions - otherwise the "wait" variants of no-wait 285 * control instructions would degenerate to the "no-wait" variants 286 * after FP context switches but work correctly otherwise. It's 287 * particularly important to trap WAITs when there is no NPX - 288 * otherwise the "wait" variants would always degenerate. 289 * 290 * Try setting CR0_NE to get correct error reporting on 486DX's. 291 * Setting it should fail or do nothing on lesser processors. 292 */ 293 load_cr0(rcr0() | CR0_MP | CR0_NE); 294 /* 295 * But don't trap while we're probing. 296 */ 297 stop_emulating(); 298 /* 299 * Finish resetting the coprocessor, if any. If there is an error 300 * pending, then we may get a bogus IRQ13, but npx_intr() will handle 301 * it OK. Bogus halts have never been observed, but we enabled 302 * IRQ13 and cleared the BUSY# latch early to handle them anyway. 303 */ 304 fninit(); 305 306 device_set_desc(dev, "math processor"); 307 308 /* 309 * Don't use fwait here because it might hang. 310 * Don't use fnop here because it usually hangs if there is no FPU. 311 */ 312 DELAY(1000); /* wait for any IRQ13 */ 313#ifdef DIAGNOSTIC 314 if (npx_intrs_while_probing != 0) 315 printf("fninit caused %u bogus npx interrupt(s)\n", 316 npx_intrs_while_probing); 317 if (npx_traps_while_probing != 0) 318 printf("fninit caused %u bogus npx trap(s)\n", 319 npx_traps_while_probing); 320#endif 321 /* 322 * Check for a status of mostly zero. 323 */ 324 status = 0x5a5a; 325 fnstsw(&status); 326 if ((status & 0xb8ff) == 0) { 327 /* 328 * Good, now check for a proper control word. 329 */ 330 control = 0x5a5a; 331 fnstcw(&control); 332 if ((control & 0x1f3f) == 0x033f) { 333 hw_float = npx_exists = 1; 334 /* 335 * We have an npx, now divide by 0 to see if exception 336 * 16 works. 337 */ 338 control &= ~(1 << 2); /* enable divide by 0 trap */ 339 fldcw(&control); 340#ifdef FPU_ERROR_BROKEN 341 /* 342 * FPU error signal doesn't work on some CPU 343 * accelerator board. 344 */ 345 npx_ex16 = 1; 346 return (0); 347#endif 348 npx_traps_while_probing = npx_intrs_while_probing = 0; 349 fp_divide_by_0(); 350 DELAY(1000); /* wait for any IRQ13 */ 351 if (npx_traps_while_probing != 0) { 352 /* 353 * Good, exception 16 works. 354 */ 355 npx_ex16 = 1; 356 goto no_irq13; 357 } 358 if (npx_intrs_while_probing != 0) { 359 /* 360 * Bad, we are stuck with IRQ13. 361 */ 362 npx_irq13 = 1; 363 idt[IDT_MF] = save_idt_npxtrap; 364#ifdef SMP 365 if (mp_ncpus > 1) 366 panic("npx0 cannot use IRQ 13 on an SMP system"); 367#endif 368 return (0); 369 } 370 /* 371 * Worse, even IRQ13 is broken. Use emulator. 372 */ 373 } 374 } 375 /* 376 * Probe failed, but we want to get to npxattach to initialize the 377 * emulator and say that it has been installed. XXX handle devices 378 * that aren't really devices better. 379 */ 380#ifdef SMP 381 if (mp_ncpus > 1) 382 panic("npx0 cannot be emulated on an SMP system"); 383#endif 384 /* FALLTHROUGH */ 385no_irq13: 386 idt[IDT_MF] = save_idt_npxtrap; 387 if (irq_res != NULL) { 388 bus_teardown_intr(dev, irq_res, irq_cookie); 389 bus_release_resource(dev, SYS_RES_IRQ, irq_rid, irq_res); 390 } 391 bus_release_resource(dev, SYS_RES_IOPORT, ioport_rid, ioport_res); 392 return (0); 393} 394 395/* 396 * Attach routine - announce which it is, and wire into system 397 */ 398static int 399npx_attach(dev) 400 device_t dev; 401{ 402 int flags; 403 register_t s; 404 405 flags = device_get_flags(dev); 406 407 if (npx_irq13) 408 device_printf(dev, "IRQ 13 interface\n"); 409 else if (npx_ex16) 410 device_printf(dev, "INT 16 interface\n"); 411 else 412 device_printf(dev, "WARNING: no FPU!\n"); 413 414 npxinit(__INITIAL_NPXCW__); 415 416 if (npx_cleanstate_ready == 0) { 417 s = intr_disable(); 418 stop_emulating(); 419 fpusave(&npx_cleanstate); 420 start_emulating(); 421 npx_cleanstate_ready = 1; 422 intr_restore(s); 423 } 424#ifdef I586_CPU_XXX 425 if (cpu_class == CPUCLASS_586 && npx_ex16 && npx_exists && 426 timezero("i586_bzero()", i586_bzero) < 427 timezero("bzero()", bzero) * 4 / 5) { 428 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BCOPY)) 429 bcopy_vector = i586_bcopy; 430 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_BZERO)) 431 bzero_vector = i586_bzero; 432 if (!(flags & NPX_DISABLE_I586_OPTIMIZED_COPYIO)) { 433 copyin_vector = i586_copyin; 434 copyout_vector = i586_copyout; 435 } 436 } 437#endif 438 439 return (0); /* XXX unused */ 440} 441 442/* 443 * Initialize floating point unit. 444 */ 445void 446npxinit(control) 447 u_short control; 448{ 449 static union savefpu dummy; 450 register_t savecrit; 451 452 if (!npx_exists) 453 return; 454 /* 455 * fninit has the same h/w bugs as fnsave. Use the detoxified 456 * fnsave to throw away any junk in the fpu. npxsave() initializes 457 * the fpu and sets fpcurthread = NULL as important side effects. 458 */ 459 savecrit = intr_disable(); 460 npxsave(&dummy); 461 stop_emulating(); 462#ifdef CPU_ENABLE_SSE 463 /* XXX npxsave() doesn't actually initialize the fpu in the SSE case. */ 464 if (cpu_fxsr) 465 fninit(); 466#endif 467 fldcw(&control); 468 start_emulating(); 469 intr_restore(savecrit); 470} 471 472/* 473 * Free coprocessor (if we have it). 474 */ 475void 476npxexit(td) 477 struct thread *td; 478{ 479 register_t savecrit; 480 481 savecrit = intr_disable(); 482 if (curthread == PCPU_GET(fpcurthread)) 483 npxsave(&PCPU_GET(curpcb)->pcb_save); 484 intr_restore(savecrit); 485#ifdef NPX_DEBUG 486 if (npx_exists) { 487 u_int masked_exceptions; 488 489 masked_exceptions = GET_FPU_CW(td) & GET_FPU_SW(td) & 0x7f; 490 /* 491 * Log exceptions that would have trapped with the old 492 * control word (overflow, divide by 0, and invalid operand). 493 */ 494 if (masked_exceptions & 0x0d) 495 log(LOG_ERR, 496 "pid %d (%s) exited with masked floating point exceptions 0x%02x\n", 497 td->td_proc->p_pid, td->td_proc->p_comm, 498 masked_exceptions); 499 } 500#endif 501} 502 503int 504npxformat() 505{ 506 507 if (!npx_exists) 508 return (_MC_FPFMT_NODEV); 509#ifdef CPU_ENABLE_SSE 510 if (cpu_fxsr) 511 return (_MC_FPFMT_XMM); 512#endif 513 return (_MC_FPFMT_387); 514} 515 516/* 517 * The following mechanism is used to ensure that the FPE_... value 518 * that is passed as a trapcode to the signal handler of the user 519 * process does not have more than one bit set. 520 * 521 * Multiple bits may be set if the user process modifies the control 522 * word while a status word bit is already set. While this is a sign 523 * of bad coding, we have no choise than to narrow them down to one 524 * bit, since we must not send a trapcode that is not exactly one of 525 * the FPE_ macros. 526 * 527 * The mechanism has a static table with 127 entries. Each combination 528 * of the 7 FPU status word exception bits directly translates to a 529 * position in this table, where a single FPE_... value is stored. 530 * This FPE_... value stored there is considered the "most important" 531 * of the exception bits and will be sent as the signal code. The 532 * precedence of the bits is based upon Intel Document "Numerical 533 * Applications", Chapter "Special Computational Situations". 534 * 535 * The macro to choose one of these values does these steps: 1) Throw 536 * away status word bits that cannot be masked. 2) Throw away the bits 537 * currently masked in the control word, assuming the user isn't 538 * interested in them anymore. 3) Reinsert status word bit 7 (stack 539 * fault) if it is set, which cannot be masked but must be presered. 540 * 4) Use the remaining bits to point into the trapcode table. 541 * 542 * The 6 maskable bits in order of their preference, as stated in the 543 * above referenced Intel manual: 544 * 1 Invalid operation (FP_X_INV) 545 * 1a Stack underflow 546 * 1b Stack overflow 547 * 1c Operand of unsupported format 548 * 1d SNaN operand. 549 * 2 QNaN operand (not an exception, irrelavant here) 550 * 3 Any other invalid-operation not mentioned above or zero divide 551 * (FP_X_INV, FP_X_DZ) 552 * 4 Denormal operand (FP_X_DNML) 553 * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL) 554 * 6 Inexact result (FP_X_IMP) 555 */ 556static char fpetable[128] = { 557 0, 558 FPE_FLTINV, /* 1 - INV */ 559 FPE_FLTUND, /* 2 - DNML */ 560 FPE_FLTINV, /* 3 - INV | DNML */ 561 FPE_FLTDIV, /* 4 - DZ */ 562 FPE_FLTINV, /* 5 - INV | DZ */ 563 FPE_FLTDIV, /* 6 - DNML | DZ */ 564 FPE_FLTINV, /* 7 - INV | DNML | DZ */ 565 FPE_FLTOVF, /* 8 - OFL */ 566 FPE_FLTINV, /* 9 - INV | OFL */ 567 FPE_FLTUND, /* A - DNML | OFL */ 568 FPE_FLTINV, /* B - INV | DNML | OFL */ 569 FPE_FLTDIV, /* C - DZ | OFL */ 570 FPE_FLTINV, /* D - INV | DZ | OFL */ 571 FPE_FLTDIV, /* E - DNML | DZ | OFL */ 572 FPE_FLTINV, /* F - INV | DNML | DZ | OFL */ 573 FPE_FLTUND, /* 10 - UFL */ 574 FPE_FLTINV, /* 11 - INV | UFL */ 575 FPE_FLTUND, /* 12 - DNML | UFL */ 576 FPE_FLTINV, /* 13 - INV | DNML | UFL */ 577 FPE_FLTDIV, /* 14 - DZ | UFL */ 578 FPE_FLTINV, /* 15 - INV | DZ | UFL */ 579 FPE_FLTDIV, /* 16 - DNML | DZ | UFL */ 580 FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */ 581 FPE_FLTOVF, /* 18 - OFL | UFL */ 582 FPE_FLTINV, /* 19 - INV | OFL | UFL */ 583 FPE_FLTUND, /* 1A - DNML | OFL | UFL */ 584 FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */ 585 FPE_FLTDIV, /* 1C - DZ | OFL | UFL */ 586 FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */ 587 FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */ 588 FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */ 589 FPE_FLTRES, /* 20 - IMP */ 590 FPE_FLTINV, /* 21 - INV | IMP */ 591 FPE_FLTUND, /* 22 - DNML | IMP */ 592 FPE_FLTINV, /* 23 - INV | DNML | IMP */ 593 FPE_FLTDIV, /* 24 - DZ | IMP */ 594 FPE_FLTINV, /* 25 - INV | DZ | IMP */ 595 FPE_FLTDIV, /* 26 - DNML | DZ | IMP */ 596 FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */ 597 FPE_FLTOVF, /* 28 - OFL | IMP */ 598 FPE_FLTINV, /* 29 - INV | OFL | IMP */ 599 FPE_FLTUND, /* 2A - DNML | OFL | IMP */ 600 FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */ 601 FPE_FLTDIV, /* 2C - DZ | OFL | IMP */ 602 FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */ 603 FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */ 604 FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */ 605 FPE_FLTUND, /* 30 - UFL | IMP */ 606 FPE_FLTINV, /* 31 - INV | UFL | IMP */ 607 FPE_FLTUND, /* 32 - DNML | UFL | IMP */ 608 FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */ 609 FPE_FLTDIV, /* 34 - DZ | UFL | IMP */ 610 FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */ 611 FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */ 612 FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */ 613 FPE_FLTOVF, /* 38 - OFL | UFL | IMP */ 614 FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */ 615 FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */ 616 FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */ 617 FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */ 618 FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */ 619 FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */ 620 FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */ 621 FPE_FLTSUB, /* 40 - STK */ 622 FPE_FLTSUB, /* 41 - INV | STK */ 623 FPE_FLTUND, /* 42 - DNML | STK */ 624 FPE_FLTSUB, /* 43 - INV | DNML | STK */ 625 FPE_FLTDIV, /* 44 - DZ | STK */ 626 FPE_FLTSUB, /* 45 - INV | DZ | STK */ 627 FPE_FLTDIV, /* 46 - DNML | DZ | STK */ 628 FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */ 629 FPE_FLTOVF, /* 48 - OFL | STK */ 630 FPE_FLTSUB, /* 49 - INV | OFL | STK */ 631 FPE_FLTUND, /* 4A - DNML | OFL | STK */ 632 FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */ 633 FPE_FLTDIV, /* 4C - DZ | OFL | STK */ 634 FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */ 635 FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */ 636 FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */ 637 FPE_FLTUND, /* 50 - UFL | STK */ 638 FPE_FLTSUB, /* 51 - INV | UFL | STK */ 639 FPE_FLTUND, /* 52 - DNML | UFL | STK */ 640 FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */ 641 FPE_FLTDIV, /* 54 - DZ | UFL | STK */ 642 FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */ 643 FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */ 644 FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */ 645 FPE_FLTOVF, /* 58 - OFL | UFL | STK */ 646 FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */ 647 FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */ 648 FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */ 649 FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */ 650 FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */ 651 FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */ 652 FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */ 653 FPE_FLTRES, /* 60 - IMP | STK */ 654 FPE_FLTSUB, /* 61 - INV | IMP | STK */ 655 FPE_FLTUND, /* 62 - DNML | IMP | STK */ 656 FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */ 657 FPE_FLTDIV, /* 64 - DZ | IMP | STK */ 658 FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */ 659 FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */ 660 FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */ 661 FPE_FLTOVF, /* 68 - OFL | IMP | STK */ 662 FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */ 663 FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */ 664 FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */ 665 FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */ 666 FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */ 667 FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */ 668 FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */ 669 FPE_FLTUND, /* 70 - UFL | IMP | STK */ 670 FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */ 671 FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */ 672 FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */ 673 FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */ 674 FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */ 675 FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */ 676 FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */ 677 FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */ 678 FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */ 679 FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */ 680 FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */ 681 FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */ 682 FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */ 683 FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */ 684 FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */ 685}; 686 687/* 688 * Preserve the FP status word, clear FP exceptions, then generate a SIGFPE. 689 * 690 * Clearing exceptions is necessary mainly to avoid IRQ13 bugs. We now 691 * depend on longjmp() restoring a usable state. Restoring the state 692 * or examining it might fail if we didn't clear exceptions. 693 * 694 * The error code chosen will be one of the FPE_... macros. It will be 695 * sent as the second argument to old BSD-style signal handlers and as 696 * "siginfo_t->si_code" (second argument) to SA_SIGINFO signal handlers. 697 * 698 * XXX the FP state is not preserved across signal handlers. So signal 699 * handlers cannot afford to do FP unless they preserve the state or 700 * longjmp() out. Both preserving the state and longjmp()ing may be 701 * destroyed by IRQ13 bugs. Clearing FP exceptions is not an acceptable 702 * solution for signals other than SIGFPE. 703 */ 704int 705npxtrap() 706{ 707 register_t savecrit; 708 u_short control, status; 709 710 if (!npx_exists) { 711 printf("npxtrap: fpcurthread = %p, curthread = %p, npx_exists = %d\n", 712 PCPU_GET(fpcurthread), curthread, npx_exists); 713 panic("npxtrap from nowhere"); 714 } 715 savecrit = intr_disable(); 716 717 /* 718 * Interrupt handling (for another interrupt) may have pushed the 719 * state to memory. Fetch the relevant parts of the state from 720 * wherever they are. 721 */ 722 if (PCPU_GET(fpcurthread) != curthread) { 723 control = GET_FPU_CW(curthread); 724 status = GET_FPU_SW(curthread); 725 } else { 726 fnstcw(&control); 727 fnstsw(&status); 728 } 729 730 if (PCPU_GET(fpcurthread) == curthread) 731 fnclex(); 732 intr_restore(savecrit); 733 return (fpetable[status & ((~control & 0x3f) | 0x40)]); 734} 735 736/* 737 * Implement device not available (DNA) exception 738 * 739 * It would be better to switch FP context here (if curthread != fpcurthread) 740 * and not necessarily for every context switch, but it is too hard to 741 * access foreign pcb's. 742 */ 743 744static int err_count = 0; 745 746int 747npxdna() 748{ 749 struct pcb *pcb; 750 register_t s; 751#ifdef CPU_ENABLE_SSE 752 int mxcsr; 753#endif 754 u_short control; 755 756 if (!npx_exists) 757 return (0); 758 if (PCPU_GET(fpcurthread) == curthread) { 759 printf("npxdna: fpcurthread == curthread %d times\n", 760 ++err_count); 761 stop_emulating(); 762 return (1); 763 } 764 if (PCPU_GET(fpcurthread) != NULL) { 765 printf("npxdna: fpcurthread = %p (%d), curthread = %p (%d)\n", 766 PCPU_GET(fpcurthread), 767 PCPU_GET(fpcurthread)->td_proc->p_pid, 768 curthread, curthread->td_proc->p_pid); 769 panic("npxdna"); 770 } 771 s = intr_disable(); 772 stop_emulating(); 773 /* 774 * Record new context early in case frstor causes an IRQ13. 775 */ 776 PCPU_SET(fpcurthread, curthread); 777 pcb = PCPU_GET(curpcb); 778 779 if ((pcb->pcb_flags & PCB_NPXINITDONE) == 0) { 780 /* 781 * This is the first time this thread has used the FPU or 782 * the PCB doesn't contain a clean FPU state. Explicitly 783 * initialize the FPU and load the default control word. 784 */ 785 fninit(); 786 control = __INITIAL_NPXCW__; 787 fldcw(&control); 788#ifdef CPU_ENABLE_SSE 789 if (cpu_fxsr) { 790 mxcsr = __INITIAL_MXCSR__; 791 ldmxcsr(mxcsr); 792 } 793#endif 794 pcb->pcb_flags |= PCB_NPXINITDONE; 795 } else { 796 /* 797 * The following frstor may cause an IRQ13 when the state 798 * being restored has a pending error. The error will 799 * appear to have been triggered by the current (npx) user 800 * instruction even when that instruction is a no-wait 801 * instruction that should not trigger an error (e.g., 802 * fnclex). On at least one 486 system all of the no-wait 803 * instructions are broken the same as frstor, so our 804 * treatment does not amplify the breakage. On at least 805 * one 386/Cyrix 387 system, fnclex works correctly while 806 * frstor and fnsave are broken, so our treatment breaks 807 * fnclex if it is the first FPU instruction after a context 808 * switch. 809 */ 810 fpurstor(&pcb->pcb_save); 811 } 812 intr_restore(s); 813 814 return (1); 815} 816 817/* 818 * Wrapper for fnsave instruction, partly to handle hardware bugs. When npx 819 * exceptions are reported via IRQ13, spurious IRQ13's may be triggered by 820 * no-wait npx instructions. See the Intel application note AP-578 for 821 * details. This doesn't cause any additional complications here. IRQ13's 822 * are inherently asynchronous unless the CPU is frozen to deliver them -- 823 * one that started in userland may be delivered many instructions later, 824 * after the process has entered the kernel. It may even be delivered after 825 * the fnsave here completes. A spurious IRQ13 for the fnsave is handled in 826 * the same way as a very-late-arriving non-spurious IRQ13 from user mode: 827 * it is normally ignored at first because we set fpcurthread to NULL; it is 828 * normally retriggered in npxdna() after return to user mode. 829 * 830 * npxsave() must be called with interrupts disabled, so that it clears 831 * fpcurthread atomically with saving the state. We require callers to do the 832 * disabling, since most callers need to disable interrupts anyway to call 833 * npxsave() atomically with checking fpcurthread. 834 * 835 * A previous version of npxsave() went to great lengths to excecute fnsave 836 * with interrupts enabled in case executing it froze the CPU. This case 837 * can't happen, at least for Intel CPU/NPX's. Spurious IRQ13's don't imply 838 * spurious freezes. 839 */ 840void 841npxsave(addr) 842 union savefpu *addr; 843{ 844 845 stop_emulating(); 846 fpusave(addr); 847 848 start_emulating(); 849 PCPU_SET(fpcurthread, NULL); 850} 851 852/* 853 * This should be called with interrupts disabled and only when the owning 854 * FPU thread is non-null. 855 */ 856void 857npxdrop() 858{ 859 struct thread *td; 860 861 /* 862 * Discard pending exceptions in the !cpu_fxsr case so that unmasked 863 * ones don't cause a panic on the next frstor. 864 */ 865#ifdef CPU_ENABLE_SSE 866 if (!cpu_fxsr) 867#endif 868 fnclex(); 869 870 td = PCPU_GET(fpcurthread); 871 PCPU_SET(fpcurthread, NULL); 872 td->td_pcb->pcb_flags &= ~PCB_NPXINITDONE; 873 start_emulating(); 874} 875 876/* 877 * Get the state of the FPU without dropping ownership (if possible). 878 * It returns the FPU ownership status. 879 */ 880int 881npxgetregs(td, addr) 882 struct thread *td; 883 union savefpu *addr; 884{ 885 register_t s; 886 887 if (!npx_exists) 888 return (_MC_FPOWNED_NONE); 889 890 if ((td->td_pcb->pcb_flags & PCB_NPXINITDONE) == 0) { 891 if (npx_cleanstate_ready) 892 bcopy(&npx_cleanstate, addr, sizeof(npx_cleanstate)); 893 else 894 bzero(addr, sizeof(*addr)); 895 return (_MC_FPOWNED_NONE); 896 } 897 s = intr_disable(); 898 if (td == PCPU_GET(fpcurthread)) { 899 fpusave(addr); 900#ifdef CPU_ENABLE_SSE 901 if (!cpu_fxsr) 902#endif 903 /* 904 * fnsave initializes the FPU and destroys whatever 905 * context it contains. Make sure the FPU owner 906 * starts with a clean state next time. 907 */ 908 npxdrop(); 909 intr_restore(s); 910 return (_MC_FPOWNED_FPU); 911 } else { 912 intr_restore(s); 913 bcopy(&td->td_pcb->pcb_save, addr, sizeof(*addr)); 914 return (_MC_FPOWNED_PCB); 915 } 916} 917 918/* 919 * Set the state of the FPU. 920 */ 921void 922npxsetregs(td, addr) 923 struct thread *td; 924 union savefpu *addr; 925{ 926 register_t s; 927 928 if (!npx_exists) 929 return; 930 931 s = intr_disable(); 932 if (td == PCPU_GET(fpcurthread)) { 933#ifdef CPU_ENABLE_SSE 934 if (!cpu_fxsr) 935#endif 936 fnclex(); /* As in npxdrop(). */ 937 fpurstor(addr); 938 intr_restore(s); 939 } else { 940 intr_restore(s); 941 bcopy(addr, &td->td_pcb->pcb_save, sizeof(*addr)); 942 } 943 curthread->td_pcb->pcb_flags |= PCB_NPXINITDONE; 944} 945 946static void 947fpusave(addr) 948 union savefpu *addr; 949{ 950 951#ifdef CPU_ENABLE_SSE 952 if (cpu_fxsr) 953 fxsave(addr); 954 else 955#endif 956 fnsave(addr); 957} 958 959static void 960fpurstor(addr) 961 union savefpu *addr; 962{ 963 964#ifdef CPU_ENABLE_SSE 965 if (cpu_fxsr) 966 fxrstor(addr); 967 else 968#endif 969 frstor(addr); 970} 971 972#ifdef I586_CPU_XXX 973static long 974timezero(funcname, func) 975 const char *funcname; 976 void (*func)(void *buf, size_t len); 977 978{ 979 void *buf; 980#define BUFSIZE 1048576 981 long usec; 982 struct timeval finish, start; 983 984 buf = malloc(BUFSIZE, M_TEMP, M_NOWAIT); 985 if (buf == NULL) 986 return (BUFSIZE); 987 microtime(&start); 988 (*func)(buf, BUFSIZE); 989 microtime(&finish); 990 usec = 1000000 * (finish.tv_sec - start.tv_sec) + 991 finish.tv_usec - start.tv_usec; 992 if (usec <= 0) 993 usec = 1; 994 if (bootverbose) 995 printf("%s bandwidth = %u kBps\n", funcname, 996 (u_int32_t)(((BUFSIZE >> 10) * 1000000) / usec)); 997 free(buf, M_TEMP); 998 return (usec); 999} 1000#endif /* I586_CPU */ 1001 1002static device_method_t npx_methods[] = { 1003 /* Device interface */ 1004 DEVMETHOD(device_identify, npx_identify), 1005 DEVMETHOD(device_probe, npx_probe), 1006 DEVMETHOD(device_attach, npx_attach), 1007 DEVMETHOD(device_detach, bus_generic_detach), 1008 DEVMETHOD(device_shutdown, bus_generic_shutdown), 1009 DEVMETHOD(device_suspend, bus_generic_suspend), 1010 DEVMETHOD(device_resume, bus_generic_resume), 1011 1012 { 0, 0 } 1013}; 1014 1015static driver_t npx_driver = { 1016 "npx", 1017 npx_methods, 1018 1, /* no softc */ 1019}; 1020 1021static devclass_t npx_devclass; 1022 1023/* 1024 * We prefer to attach to the root nexus so that the usual case (exception 16) 1025 * doesn't describe the processor as being `on isa'. 1026 */ 1027DRIVER_MODULE(npx, nexus, npx_driver, npx_devclass, 0, 0); 1028 1029#ifdef DEV_ISA 1030/* 1031 * This sucks up the legacy ISA support assignments from PNPBIOS/ACPI. 1032 */ 1033static struct isa_pnp_id npxisa_ids[] = { 1034 { 0x040cd041, "Legacy ISA coprocessor support" }, /* PNP0C04 */ 1035 { 0 } 1036}; 1037 1038static int 1039npxisa_probe(device_t dev) 1040{ 1041 int result; 1042 if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, npxisa_ids)) <= 0) { 1043 device_quiet(dev); 1044 } 1045 return(result); 1046} 1047 1048static int 1049npxisa_attach(device_t dev) 1050{ 1051 return (0); 1052} 1053 1054static device_method_t npxisa_methods[] = { 1055 /* Device interface */ 1056 DEVMETHOD(device_probe, npxisa_probe), 1057 DEVMETHOD(device_attach, npxisa_attach), 1058 DEVMETHOD(device_detach, bus_generic_detach), 1059 DEVMETHOD(device_shutdown, bus_generic_shutdown), 1060 DEVMETHOD(device_suspend, bus_generic_suspend), 1061 DEVMETHOD(device_resume, bus_generic_resume), 1062 1063 { 0, 0 } 1064}; 1065 1066static driver_t npxisa_driver = { 1067 "npxisa", 1068 npxisa_methods, 1069 1, /* no softc */ 1070}; 1071 1072static devclass_t npxisa_devclass; 1073 1074DRIVER_MODULE(npxisa, isa, npxisa_driver, npxisa_devclass, 0, 0); 1075#ifndef PC98 1076DRIVER_MODULE(npxisa, acpi, npxisa_driver, npxisa_devclass, 0, 0); 1077#endif 1078#endif /* DEV_ISA */ 1079