if_rum.c revision 228621
1/*	$FreeBSD: head/sys/dev/usb/wlan/if_rum.c 228621 2011-12-17 10:23:17Z bschmidt $	*/
2
3/*-
4 * Copyright (c) 2005-2007 Damien Bergamini <damien.bergamini@free.fr>
5 * Copyright (c) 2006 Niall O'Higgins <niallo@openbsd.org>
6 * Copyright (c) 2007-2008 Hans Petter Selasky <hselasky@FreeBSD.org>
7 *
8 * Permission to use, copy, modify, and distribute this software for any
9 * purpose with or without fee is hereby granted, provided that the above
10 * copyright notice and this permission notice appear in all copies.
11 *
12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19 */
20
21#include <sys/cdefs.h>
22__FBSDID("$FreeBSD: head/sys/dev/usb/wlan/if_rum.c 228621 2011-12-17 10:23:17Z bschmidt $");
23
24/*-
25 * Ralink Technology RT2501USB/RT2601USB chipset driver
26 * http://www.ralinktech.com.tw/
27 */
28
29#include <sys/param.h>
30#include <sys/sockio.h>
31#include <sys/sysctl.h>
32#include <sys/lock.h>
33#include <sys/mutex.h>
34#include <sys/mbuf.h>
35#include <sys/kernel.h>
36#include <sys/socket.h>
37#include <sys/systm.h>
38#include <sys/malloc.h>
39#include <sys/module.h>
40#include <sys/bus.h>
41#include <sys/endian.h>
42#include <sys/kdb.h>
43
44#include <machine/bus.h>
45#include <machine/resource.h>
46#include <sys/rman.h>
47
48#include <net/bpf.h>
49#include <net/if.h>
50#include <net/if_arp.h>
51#include <net/ethernet.h>
52#include <net/if_dl.h>
53#include <net/if_media.h>
54#include <net/if_types.h>
55
56#ifdef INET
57#include <netinet/in.h>
58#include <netinet/in_systm.h>
59#include <netinet/in_var.h>
60#include <netinet/if_ether.h>
61#include <netinet/ip.h>
62#endif
63
64#include <net80211/ieee80211_var.h>
65#include <net80211/ieee80211_regdomain.h>
66#include <net80211/ieee80211_radiotap.h>
67#include <net80211/ieee80211_ratectl.h>
68
69#include <dev/usb/usb.h>
70#include <dev/usb/usbdi.h>
71#include "usbdevs.h"
72
73#define	USB_DEBUG_VAR rum_debug
74#include <dev/usb/usb_debug.h>
75
76#include <dev/usb/wlan/if_rumreg.h>
77#include <dev/usb/wlan/if_rumvar.h>
78#include <dev/usb/wlan/if_rumfw.h>
79
80#ifdef USB_DEBUG
81static int rum_debug = 0;
82
83static SYSCTL_NODE(_hw_usb, OID_AUTO, rum, CTLFLAG_RW, 0, "USB rum");
84SYSCTL_INT(_hw_usb_rum, OID_AUTO, debug, CTLFLAG_RW, &rum_debug, 0,
85    "Debug level");
86#endif
87
88static const STRUCT_USB_HOST_ID rum_devs[] = {
89#define	RUM_DEV(v,p)  { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
90    RUM_DEV(ABOCOM, HWU54DM),
91    RUM_DEV(ABOCOM, RT2573_2),
92    RUM_DEV(ABOCOM, RT2573_3),
93    RUM_DEV(ABOCOM, RT2573_4),
94    RUM_DEV(ABOCOM, WUG2700),
95    RUM_DEV(AMIT, CGWLUSB2GO),
96    RUM_DEV(ASUS, RT2573_1),
97    RUM_DEV(ASUS, RT2573_2),
98    RUM_DEV(BELKIN, F5D7050A),
99    RUM_DEV(BELKIN, F5D9050V3),
100    RUM_DEV(CISCOLINKSYS, WUSB54GC),
101    RUM_DEV(CISCOLINKSYS, WUSB54GR),
102    RUM_DEV(CONCEPTRONIC2, C54RU2),
103    RUM_DEV(COREGA, CGWLUSB2GL),
104    RUM_DEV(COREGA, CGWLUSB2GPX),
105    RUM_DEV(DICKSMITH, CWD854F),
106    RUM_DEV(DICKSMITH, RT2573),
107    RUM_DEV(EDIMAX, EW7318USG),
108    RUM_DEV(DLINK2, DWLG122C1),
109    RUM_DEV(DLINK2, WUA1340),
110    RUM_DEV(DLINK2, DWA111),
111    RUM_DEV(DLINK2, DWA110),
112    RUM_DEV(GIGABYTE, GNWB01GS),
113    RUM_DEV(GIGABYTE, GNWI05GS),
114    RUM_DEV(GIGASET, RT2573),
115    RUM_DEV(GOODWAY, RT2573),
116    RUM_DEV(GUILLEMOT, HWGUSB254LB),
117    RUM_DEV(GUILLEMOT, HWGUSB254V2AP),
118    RUM_DEV(HUAWEI3COM, WUB320G),
119    RUM_DEV(MELCO, G54HP),
120    RUM_DEV(MELCO, SG54HP),
121    RUM_DEV(MELCO, WLIUCG),
122    RUM_DEV(MELCO, WLRUCG),
123    RUM_DEV(MELCO, WLRUCGAOSS),
124    RUM_DEV(MSI, RT2573_1),
125    RUM_DEV(MSI, RT2573_2),
126    RUM_DEV(MSI, RT2573_3),
127    RUM_DEV(MSI, RT2573_4),
128    RUM_DEV(NOVATECH, RT2573),
129    RUM_DEV(PLANEX2, GWUS54HP),
130    RUM_DEV(PLANEX2, GWUS54MINI2),
131    RUM_DEV(PLANEX2, GWUSMM),
132    RUM_DEV(QCOM, RT2573),
133    RUM_DEV(QCOM, RT2573_2),
134    RUM_DEV(QCOM, RT2573_3),
135    RUM_DEV(RALINK, RT2573),
136    RUM_DEV(RALINK, RT2573_2),
137    RUM_DEV(RALINK, RT2671),
138    RUM_DEV(SITECOMEU, WL113R2),
139    RUM_DEV(SITECOMEU, WL172),
140    RUM_DEV(SPARKLAN, RT2573),
141    RUM_DEV(SURECOM, RT2573),
142#undef RUM_DEV
143};
144
145static device_probe_t rum_match;
146static device_attach_t rum_attach;
147static device_detach_t rum_detach;
148
149static usb_callback_t rum_bulk_read_callback;
150static usb_callback_t rum_bulk_write_callback;
151
152static usb_error_t	rum_do_request(struct rum_softc *sc,
153			    struct usb_device_request *req, void *data);
154static struct ieee80211vap *rum_vap_create(struct ieee80211com *,
155			    const char [IFNAMSIZ], int, enum ieee80211_opmode,
156			    int, const uint8_t [IEEE80211_ADDR_LEN],
157			    const uint8_t [IEEE80211_ADDR_LEN]);
158static void		rum_vap_delete(struct ieee80211vap *);
159static void		rum_tx_free(struct rum_tx_data *, int);
160static void		rum_setup_tx_list(struct rum_softc *);
161static void		rum_unsetup_tx_list(struct rum_softc *);
162static int		rum_newstate(struct ieee80211vap *,
163			    enum ieee80211_state, int);
164static void		rum_setup_tx_desc(struct rum_softc *,
165			    struct rum_tx_desc *, uint32_t, uint16_t, int,
166			    int);
167static int		rum_tx_mgt(struct rum_softc *, struct mbuf *,
168			    struct ieee80211_node *);
169static int		rum_tx_raw(struct rum_softc *, struct mbuf *,
170			    struct ieee80211_node *,
171			    const struct ieee80211_bpf_params *);
172static int		rum_tx_data(struct rum_softc *, struct mbuf *,
173			    struct ieee80211_node *);
174static void		rum_start(struct ifnet *);
175static int		rum_ioctl(struct ifnet *, u_long, caddr_t);
176static void		rum_eeprom_read(struct rum_softc *, uint16_t, void *,
177			    int);
178static uint32_t		rum_read(struct rum_softc *, uint16_t);
179static void		rum_read_multi(struct rum_softc *, uint16_t, void *,
180			    int);
181static usb_error_t	rum_write(struct rum_softc *, uint16_t, uint32_t);
182static usb_error_t	rum_write_multi(struct rum_softc *, uint16_t, void *,
183			    size_t);
184static void		rum_bbp_write(struct rum_softc *, uint8_t, uint8_t);
185static uint8_t		rum_bbp_read(struct rum_softc *, uint8_t);
186static void		rum_rf_write(struct rum_softc *, uint8_t, uint32_t);
187static void		rum_select_antenna(struct rum_softc *);
188static void		rum_enable_mrr(struct rum_softc *);
189static void		rum_set_txpreamble(struct rum_softc *);
190static void		rum_set_basicrates(struct rum_softc *);
191static void		rum_select_band(struct rum_softc *,
192			    struct ieee80211_channel *);
193static void		rum_set_chan(struct rum_softc *,
194			    struct ieee80211_channel *);
195static void		rum_enable_tsf_sync(struct rum_softc *);
196static void		rum_enable_tsf(struct rum_softc *);
197static void		rum_update_slot(struct ifnet *);
198static void		rum_set_bssid(struct rum_softc *, const uint8_t *);
199static void		rum_set_macaddr(struct rum_softc *, const uint8_t *);
200static void		rum_update_mcast(struct ifnet *);
201static void		rum_update_promisc(struct ifnet *);
202static void		rum_setpromisc(struct rum_softc *);
203static const char	*rum_get_rf(int);
204static void		rum_read_eeprom(struct rum_softc *);
205static int		rum_bbp_init(struct rum_softc *);
206static void		rum_init_locked(struct rum_softc *);
207static void		rum_init(void *);
208static void		rum_stop(struct rum_softc *);
209static void		rum_load_microcode(struct rum_softc *, const uint8_t *,
210			    size_t);
211static void		rum_prepare_beacon(struct rum_softc *,
212			    struct ieee80211vap *);
213static int		rum_raw_xmit(struct ieee80211_node *, struct mbuf *,
214			    const struct ieee80211_bpf_params *);
215static void		rum_scan_start(struct ieee80211com *);
216static void		rum_scan_end(struct ieee80211com *);
217static void		rum_set_channel(struct ieee80211com *);
218static int		rum_get_rssi(struct rum_softc *, uint8_t);
219static void		rum_ratectl_start(struct rum_softc *,
220			    struct ieee80211_node *);
221static void		rum_ratectl_timeout(void *);
222static void		rum_ratectl_task(void *, int);
223static int		rum_pause(struct rum_softc *, int);
224
225static const struct {
226	uint32_t	reg;
227	uint32_t	val;
228} rum_def_mac[] = {
229	{ RT2573_TXRX_CSR0,  0x025fb032 },
230	{ RT2573_TXRX_CSR1,  0x9eaa9eaf },
231	{ RT2573_TXRX_CSR2,  0x8a8b8c8d },
232	{ RT2573_TXRX_CSR3,  0x00858687 },
233	{ RT2573_TXRX_CSR7,  0x2e31353b },
234	{ RT2573_TXRX_CSR8,  0x2a2a2a2c },
235	{ RT2573_TXRX_CSR15, 0x0000000f },
236	{ RT2573_MAC_CSR6,   0x00000fff },
237	{ RT2573_MAC_CSR8,   0x016c030a },
238	{ RT2573_MAC_CSR10,  0x00000718 },
239	{ RT2573_MAC_CSR12,  0x00000004 },
240	{ RT2573_MAC_CSR13,  0x00007f00 },
241	{ RT2573_SEC_CSR0,   0x00000000 },
242	{ RT2573_SEC_CSR1,   0x00000000 },
243	{ RT2573_SEC_CSR5,   0x00000000 },
244	{ RT2573_PHY_CSR1,   0x000023b0 },
245	{ RT2573_PHY_CSR5,   0x00040a06 },
246	{ RT2573_PHY_CSR6,   0x00080606 },
247	{ RT2573_PHY_CSR7,   0x00000408 },
248	{ RT2573_AIFSN_CSR,  0x00002273 },
249	{ RT2573_CWMIN_CSR,  0x00002344 },
250	{ RT2573_CWMAX_CSR,  0x000034aa }
251};
252
253static const struct {
254	uint8_t	reg;
255	uint8_t	val;
256} rum_def_bbp[] = {
257	{   3, 0x80 },
258	{  15, 0x30 },
259	{  17, 0x20 },
260	{  21, 0xc8 },
261	{  22, 0x38 },
262	{  23, 0x06 },
263	{  24, 0xfe },
264	{  25, 0x0a },
265	{  26, 0x0d },
266	{  32, 0x0b },
267	{  34, 0x12 },
268	{  37, 0x07 },
269	{  39, 0xf8 },
270	{  41, 0x60 },
271	{  53, 0x10 },
272	{  54, 0x18 },
273	{  60, 0x10 },
274	{  61, 0x04 },
275	{  62, 0x04 },
276	{  75, 0xfe },
277	{  86, 0xfe },
278	{  88, 0xfe },
279	{  90, 0x0f },
280	{  99, 0x00 },
281	{ 102, 0x16 },
282	{ 107, 0x04 }
283};
284
285static const struct rfprog {
286	uint8_t		chan;
287	uint32_t	r1, r2, r3, r4;
288}  rum_rf5226[] = {
289	{   1, 0x00b03, 0x001e1, 0x1a014, 0x30282 },
290	{   2, 0x00b03, 0x001e1, 0x1a014, 0x30287 },
291	{   3, 0x00b03, 0x001e2, 0x1a014, 0x30282 },
292	{   4, 0x00b03, 0x001e2, 0x1a014, 0x30287 },
293	{   5, 0x00b03, 0x001e3, 0x1a014, 0x30282 },
294	{   6, 0x00b03, 0x001e3, 0x1a014, 0x30287 },
295	{   7, 0x00b03, 0x001e4, 0x1a014, 0x30282 },
296	{   8, 0x00b03, 0x001e4, 0x1a014, 0x30287 },
297	{   9, 0x00b03, 0x001e5, 0x1a014, 0x30282 },
298	{  10, 0x00b03, 0x001e5, 0x1a014, 0x30287 },
299	{  11, 0x00b03, 0x001e6, 0x1a014, 0x30282 },
300	{  12, 0x00b03, 0x001e6, 0x1a014, 0x30287 },
301	{  13, 0x00b03, 0x001e7, 0x1a014, 0x30282 },
302	{  14, 0x00b03, 0x001e8, 0x1a014, 0x30284 },
303
304	{  34, 0x00b03, 0x20266, 0x36014, 0x30282 },
305	{  38, 0x00b03, 0x20267, 0x36014, 0x30284 },
306	{  42, 0x00b03, 0x20268, 0x36014, 0x30286 },
307	{  46, 0x00b03, 0x20269, 0x36014, 0x30288 },
308
309	{  36, 0x00b03, 0x00266, 0x26014, 0x30288 },
310	{  40, 0x00b03, 0x00268, 0x26014, 0x30280 },
311	{  44, 0x00b03, 0x00269, 0x26014, 0x30282 },
312	{  48, 0x00b03, 0x0026a, 0x26014, 0x30284 },
313	{  52, 0x00b03, 0x0026b, 0x26014, 0x30286 },
314	{  56, 0x00b03, 0x0026c, 0x26014, 0x30288 },
315	{  60, 0x00b03, 0x0026e, 0x26014, 0x30280 },
316	{  64, 0x00b03, 0x0026f, 0x26014, 0x30282 },
317
318	{ 100, 0x00b03, 0x0028a, 0x2e014, 0x30280 },
319	{ 104, 0x00b03, 0x0028b, 0x2e014, 0x30282 },
320	{ 108, 0x00b03, 0x0028c, 0x2e014, 0x30284 },
321	{ 112, 0x00b03, 0x0028d, 0x2e014, 0x30286 },
322	{ 116, 0x00b03, 0x0028e, 0x2e014, 0x30288 },
323	{ 120, 0x00b03, 0x002a0, 0x2e014, 0x30280 },
324	{ 124, 0x00b03, 0x002a1, 0x2e014, 0x30282 },
325	{ 128, 0x00b03, 0x002a2, 0x2e014, 0x30284 },
326	{ 132, 0x00b03, 0x002a3, 0x2e014, 0x30286 },
327	{ 136, 0x00b03, 0x002a4, 0x2e014, 0x30288 },
328	{ 140, 0x00b03, 0x002a6, 0x2e014, 0x30280 },
329
330	{ 149, 0x00b03, 0x002a8, 0x2e014, 0x30287 },
331	{ 153, 0x00b03, 0x002a9, 0x2e014, 0x30289 },
332	{ 157, 0x00b03, 0x002ab, 0x2e014, 0x30281 },
333	{ 161, 0x00b03, 0x002ac, 0x2e014, 0x30283 },
334	{ 165, 0x00b03, 0x002ad, 0x2e014, 0x30285 }
335}, rum_rf5225[] = {
336	{   1, 0x00b33, 0x011e1, 0x1a014, 0x30282 },
337	{   2, 0x00b33, 0x011e1, 0x1a014, 0x30287 },
338	{   3, 0x00b33, 0x011e2, 0x1a014, 0x30282 },
339	{   4, 0x00b33, 0x011e2, 0x1a014, 0x30287 },
340	{   5, 0x00b33, 0x011e3, 0x1a014, 0x30282 },
341	{   6, 0x00b33, 0x011e3, 0x1a014, 0x30287 },
342	{   7, 0x00b33, 0x011e4, 0x1a014, 0x30282 },
343	{   8, 0x00b33, 0x011e4, 0x1a014, 0x30287 },
344	{   9, 0x00b33, 0x011e5, 0x1a014, 0x30282 },
345	{  10, 0x00b33, 0x011e5, 0x1a014, 0x30287 },
346	{  11, 0x00b33, 0x011e6, 0x1a014, 0x30282 },
347	{  12, 0x00b33, 0x011e6, 0x1a014, 0x30287 },
348	{  13, 0x00b33, 0x011e7, 0x1a014, 0x30282 },
349	{  14, 0x00b33, 0x011e8, 0x1a014, 0x30284 },
350
351	{  34, 0x00b33, 0x01266, 0x26014, 0x30282 },
352	{  38, 0x00b33, 0x01267, 0x26014, 0x30284 },
353	{  42, 0x00b33, 0x01268, 0x26014, 0x30286 },
354	{  46, 0x00b33, 0x01269, 0x26014, 0x30288 },
355
356	{  36, 0x00b33, 0x01266, 0x26014, 0x30288 },
357	{  40, 0x00b33, 0x01268, 0x26014, 0x30280 },
358	{  44, 0x00b33, 0x01269, 0x26014, 0x30282 },
359	{  48, 0x00b33, 0x0126a, 0x26014, 0x30284 },
360	{  52, 0x00b33, 0x0126b, 0x26014, 0x30286 },
361	{  56, 0x00b33, 0x0126c, 0x26014, 0x30288 },
362	{  60, 0x00b33, 0x0126e, 0x26014, 0x30280 },
363	{  64, 0x00b33, 0x0126f, 0x26014, 0x30282 },
364
365	{ 100, 0x00b33, 0x0128a, 0x2e014, 0x30280 },
366	{ 104, 0x00b33, 0x0128b, 0x2e014, 0x30282 },
367	{ 108, 0x00b33, 0x0128c, 0x2e014, 0x30284 },
368	{ 112, 0x00b33, 0x0128d, 0x2e014, 0x30286 },
369	{ 116, 0x00b33, 0x0128e, 0x2e014, 0x30288 },
370	{ 120, 0x00b33, 0x012a0, 0x2e014, 0x30280 },
371	{ 124, 0x00b33, 0x012a1, 0x2e014, 0x30282 },
372	{ 128, 0x00b33, 0x012a2, 0x2e014, 0x30284 },
373	{ 132, 0x00b33, 0x012a3, 0x2e014, 0x30286 },
374	{ 136, 0x00b33, 0x012a4, 0x2e014, 0x30288 },
375	{ 140, 0x00b33, 0x012a6, 0x2e014, 0x30280 },
376
377	{ 149, 0x00b33, 0x012a8, 0x2e014, 0x30287 },
378	{ 153, 0x00b33, 0x012a9, 0x2e014, 0x30289 },
379	{ 157, 0x00b33, 0x012ab, 0x2e014, 0x30281 },
380	{ 161, 0x00b33, 0x012ac, 0x2e014, 0x30283 },
381	{ 165, 0x00b33, 0x012ad, 0x2e014, 0x30285 }
382};
383
384static const struct usb_config rum_config[RUM_N_TRANSFER] = {
385	[RUM_BULK_WR] = {
386		.type = UE_BULK,
387		.endpoint = UE_ADDR_ANY,
388		.direction = UE_DIR_OUT,
389		.bufsize = (MCLBYTES + RT2573_TX_DESC_SIZE + 8),
390		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
391		.callback = rum_bulk_write_callback,
392		.timeout = 5000,	/* ms */
393	},
394	[RUM_BULK_RD] = {
395		.type = UE_BULK,
396		.endpoint = UE_ADDR_ANY,
397		.direction = UE_DIR_IN,
398		.bufsize = (MCLBYTES + RT2573_RX_DESC_SIZE),
399		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
400		.callback = rum_bulk_read_callback,
401	},
402};
403
404static int
405rum_match(device_t self)
406{
407	struct usb_attach_arg *uaa = device_get_ivars(self);
408
409	if (uaa->usb_mode != USB_MODE_HOST)
410		return (ENXIO);
411	if (uaa->info.bConfigIndex != 0)
412		return (ENXIO);
413	if (uaa->info.bIfaceIndex != RT2573_IFACE_INDEX)
414		return (ENXIO);
415
416	return (usbd_lookup_id_by_uaa(rum_devs, sizeof(rum_devs), uaa));
417}
418
419static int
420rum_attach(device_t self)
421{
422	struct usb_attach_arg *uaa = device_get_ivars(self);
423	struct rum_softc *sc = device_get_softc(self);
424	struct ieee80211com *ic;
425	struct ifnet *ifp;
426	uint8_t iface_index, bands;
427	uint32_t tmp;
428	int error, ntries;
429
430	device_set_usb_desc(self);
431	sc->sc_udev = uaa->device;
432	sc->sc_dev = self;
433
434	mtx_init(&sc->sc_mtx, device_get_nameunit(self),
435	    MTX_NETWORK_LOCK, MTX_DEF);
436
437	iface_index = RT2573_IFACE_INDEX;
438	error = usbd_transfer_setup(uaa->device, &iface_index,
439	    sc->sc_xfer, rum_config, RUM_N_TRANSFER, sc, &sc->sc_mtx);
440	if (error) {
441		device_printf(self, "could not allocate USB transfers, "
442		    "err=%s\n", usbd_errstr(error));
443		goto detach;
444	}
445
446	RUM_LOCK(sc);
447	/* retrieve RT2573 rev. no */
448	for (ntries = 0; ntries < 100; ntries++) {
449		if ((tmp = rum_read(sc, RT2573_MAC_CSR0)) != 0)
450			break;
451		if (rum_pause(sc, hz / 100))
452			break;
453	}
454	if (ntries == 100) {
455		device_printf(sc->sc_dev, "timeout waiting for chip to settle\n");
456		RUM_UNLOCK(sc);
457		goto detach;
458	}
459
460	/* retrieve MAC address and various other things from EEPROM */
461	rum_read_eeprom(sc);
462
463	device_printf(sc->sc_dev, "MAC/BBP RT2573 (rev 0x%05x), RF %s\n",
464	    tmp, rum_get_rf(sc->rf_rev));
465
466	rum_load_microcode(sc, rt2573_ucode, sizeof(rt2573_ucode));
467	RUM_UNLOCK(sc);
468
469	ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
470	if (ifp == NULL) {
471		device_printf(sc->sc_dev, "can not if_alloc()\n");
472		goto detach;
473	}
474	ic = ifp->if_l2com;
475
476	ifp->if_softc = sc;
477	if_initname(ifp, "rum", device_get_unit(sc->sc_dev));
478	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
479	ifp->if_init = rum_init;
480	ifp->if_ioctl = rum_ioctl;
481	ifp->if_start = rum_start;
482	IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
483	ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
484	IFQ_SET_READY(&ifp->if_snd);
485
486	ic->ic_ifp = ifp;
487	ic->ic_phytype = IEEE80211_T_OFDM;	/* not only, but not used */
488
489	/* set device capabilities */
490	ic->ic_caps =
491	      IEEE80211_C_STA		/* station mode supported */
492	    | IEEE80211_C_IBSS		/* IBSS mode supported */
493	    | IEEE80211_C_MONITOR	/* monitor mode supported */
494	    | IEEE80211_C_HOSTAP	/* HostAp mode supported */
495	    | IEEE80211_C_TXPMGT	/* tx power management */
496	    | IEEE80211_C_SHPREAMBLE	/* short preamble supported */
497	    | IEEE80211_C_SHSLOT	/* short slot time supported */
498	    | IEEE80211_C_BGSCAN	/* bg scanning supported */
499	    | IEEE80211_C_WPA		/* 802.11i */
500	    ;
501
502	bands = 0;
503	setbit(&bands, IEEE80211_MODE_11B);
504	setbit(&bands, IEEE80211_MODE_11G);
505	if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_5226)
506		setbit(&bands, IEEE80211_MODE_11A);
507	ieee80211_init_channels(ic, NULL, &bands);
508
509	ieee80211_ifattach(ic, sc->sc_bssid);
510	ic->ic_update_promisc = rum_update_promisc;
511	ic->ic_raw_xmit = rum_raw_xmit;
512	ic->ic_scan_start = rum_scan_start;
513	ic->ic_scan_end = rum_scan_end;
514	ic->ic_set_channel = rum_set_channel;
515
516	ic->ic_vap_create = rum_vap_create;
517	ic->ic_vap_delete = rum_vap_delete;
518	ic->ic_update_mcast = rum_update_mcast;
519
520	ieee80211_radiotap_attach(ic,
521	    &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
522		RT2573_TX_RADIOTAP_PRESENT,
523	    &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
524		RT2573_RX_RADIOTAP_PRESENT);
525
526	if (bootverbose)
527		ieee80211_announce(ic);
528
529	return (0);
530
531detach:
532	rum_detach(self);
533	return (ENXIO);			/* failure */
534}
535
536static int
537rum_detach(device_t self)
538{
539	struct rum_softc *sc = device_get_softc(self);
540	struct ifnet *ifp = sc->sc_ifp;
541	struct ieee80211com *ic;
542
543	/* stop all USB transfers */
544	usbd_transfer_unsetup(sc->sc_xfer, RUM_N_TRANSFER);
545
546	/* free TX list, if any */
547	RUM_LOCK(sc);
548	rum_unsetup_tx_list(sc);
549	RUM_UNLOCK(sc);
550
551	if (ifp) {
552		ic = ifp->if_l2com;
553		ieee80211_ifdetach(ic);
554		if_free(ifp);
555	}
556	mtx_destroy(&sc->sc_mtx);
557
558	return (0);
559}
560
561static usb_error_t
562rum_do_request(struct rum_softc *sc,
563    struct usb_device_request *req, void *data)
564{
565	usb_error_t err;
566	int ntries = 10;
567
568	while (ntries--) {
569		err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx,
570		    req, data, 0, NULL, 250 /* ms */);
571		if (err == 0)
572			break;
573
574		DPRINTFN(1, "Control request failed, %s (retrying)\n",
575		    usbd_errstr(err));
576		if (rum_pause(sc, hz / 100))
577			break;
578	}
579	return (err);
580}
581
582static struct ieee80211vap *
583rum_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
584    enum ieee80211_opmode opmode, int flags,
585    const uint8_t bssid[IEEE80211_ADDR_LEN],
586    const uint8_t mac[IEEE80211_ADDR_LEN])
587{
588	struct rum_softc *sc = ic->ic_ifp->if_softc;
589	struct rum_vap *rvp;
590	struct ieee80211vap *vap;
591
592	if (!TAILQ_EMPTY(&ic->ic_vaps))		/* only one at a time */
593		return NULL;
594	rvp = (struct rum_vap *) malloc(sizeof(struct rum_vap),
595	    M_80211_VAP, M_NOWAIT | M_ZERO);
596	if (rvp == NULL)
597		return NULL;
598	vap = &rvp->vap;
599	/* enable s/w bmiss handling for sta mode */
600	ieee80211_vap_setup(ic, vap, name, unit, opmode,
601	    flags | IEEE80211_CLONE_NOBEACONS, bssid, mac);
602
603	/* override state transition machine */
604	rvp->newstate = vap->iv_newstate;
605	vap->iv_newstate = rum_newstate;
606
607	usb_callout_init_mtx(&rvp->ratectl_ch, &sc->sc_mtx, 0);
608	TASK_INIT(&rvp->ratectl_task, 0, rum_ratectl_task, rvp);
609	ieee80211_ratectl_init(vap);
610	ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */);
611	/* complete setup */
612	ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status);
613	ic->ic_opmode = opmode;
614	return vap;
615}
616
617static void
618rum_vap_delete(struct ieee80211vap *vap)
619{
620	struct rum_vap *rvp = RUM_VAP(vap);
621	struct ieee80211com *ic = vap->iv_ic;
622
623	usb_callout_drain(&rvp->ratectl_ch);
624	ieee80211_draintask(ic, &rvp->ratectl_task);
625	ieee80211_ratectl_deinit(vap);
626	ieee80211_vap_detach(vap);
627	free(rvp, M_80211_VAP);
628}
629
630static void
631rum_tx_free(struct rum_tx_data *data, int txerr)
632{
633	struct rum_softc *sc = data->sc;
634
635	if (data->m != NULL) {
636		if (data->m->m_flags & M_TXCB)
637			ieee80211_process_callback(data->ni, data->m,
638			    txerr ? ETIMEDOUT : 0);
639		m_freem(data->m);
640		data->m = NULL;
641
642		ieee80211_free_node(data->ni);
643		data->ni = NULL;
644	}
645	STAILQ_INSERT_TAIL(&sc->tx_free, data, next);
646	sc->tx_nfree++;
647}
648
649static void
650rum_setup_tx_list(struct rum_softc *sc)
651{
652	struct rum_tx_data *data;
653	int i;
654
655	sc->tx_nfree = 0;
656	STAILQ_INIT(&sc->tx_q);
657	STAILQ_INIT(&sc->tx_free);
658
659	for (i = 0; i < RUM_TX_LIST_COUNT; i++) {
660		data = &sc->tx_data[i];
661
662		data->sc = sc;
663		STAILQ_INSERT_TAIL(&sc->tx_free, data, next);
664		sc->tx_nfree++;
665	}
666}
667
668static void
669rum_unsetup_tx_list(struct rum_softc *sc)
670{
671	struct rum_tx_data *data;
672	int i;
673
674	/* make sure any subsequent use of the queues will fail */
675	sc->tx_nfree = 0;
676	STAILQ_INIT(&sc->tx_q);
677	STAILQ_INIT(&sc->tx_free);
678
679	/* free up all node references and mbufs */
680	for (i = 0; i < RUM_TX_LIST_COUNT; i++) {
681		data = &sc->tx_data[i];
682
683		if (data->m != NULL) {
684			m_freem(data->m);
685			data->m = NULL;
686		}
687		if (data->ni != NULL) {
688			ieee80211_free_node(data->ni);
689			data->ni = NULL;
690		}
691	}
692}
693
694static int
695rum_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
696{
697	struct rum_vap *rvp = RUM_VAP(vap);
698	struct ieee80211com *ic = vap->iv_ic;
699	struct rum_softc *sc = ic->ic_ifp->if_softc;
700	const struct ieee80211_txparam *tp;
701	enum ieee80211_state ostate;
702	struct ieee80211_node *ni;
703	uint32_t tmp;
704
705	ostate = vap->iv_state;
706	DPRINTF("%s -> %s\n",
707		ieee80211_state_name[ostate],
708		ieee80211_state_name[nstate]);
709
710	IEEE80211_UNLOCK(ic);
711	RUM_LOCK(sc);
712	usb_callout_stop(&rvp->ratectl_ch);
713
714	switch (nstate) {
715	case IEEE80211_S_INIT:
716		if (ostate == IEEE80211_S_RUN) {
717			/* abort TSF synchronization */
718			tmp = rum_read(sc, RT2573_TXRX_CSR9);
719			rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff);
720		}
721		break;
722
723	case IEEE80211_S_RUN:
724		ni = ieee80211_ref_node(vap->iv_bss);
725
726		if (vap->iv_opmode != IEEE80211_M_MONITOR) {
727			rum_update_slot(ic->ic_ifp);
728			rum_enable_mrr(sc);
729			rum_set_txpreamble(sc);
730			rum_set_basicrates(sc);
731			IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid);
732			rum_set_bssid(sc, sc->sc_bssid);
733		}
734
735		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
736		    vap->iv_opmode == IEEE80211_M_IBSS)
737			rum_prepare_beacon(sc, vap);
738
739		if (vap->iv_opmode != IEEE80211_M_MONITOR)
740			rum_enable_tsf_sync(sc);
741		else
742			rum_enable_tsf(sc);
743
744		/* enable automatic rate adaptation */
745		tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
746		if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
747			rum_ratectl_start(sc, ni);
748		ieee80211_free_node(ni);
749		break;
750	default:
751		break;
752	}
753	RUM_UNLOCK(sc);
754	IEEE80211_LOCK(ic);
755	return (rvp->newstate(vap, nstate, arg));
756}
757
758static void
759rum_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
760{
761	struct rum_softc *sc = usbd_xfer_softc(xfer);
762	struct ifnet *ifp = sc->sc_ifp;
763	struct ieee80211vap *vap;
764	struct rum_tx_data *data;
765	struct mbuf *m;
766	struct usb_page_cache *pc;
767	unsigned int len;
768	int actlen, sumlen;
769
770	usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
771
772	switch (USB_GET_STATE(xfer)) {
773	case USB_ST_TRANSFERRED:
774		DPRINTFN(11, "transfer complete, %d bytes\n", actlen);
775
776		/* free resources */
777		data = usbd_xfer_get_priv(xfer);
778		rum_tx_free(data, 0);
779		usbd_xfer_set_priv(xfer, NULL);
780
781		ifp->if_opackets++;
782		ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
783
784		/* FALLTHROUGH */
785	case USB_ST_SETUP:
786tr_setup:
787		data = STAILQ_FIRST(&sc->tx_q);
788		if (data) {
789			STAILQ_REMOVE_HEAD(&sc->tx_q, next);
790			m = data->m;
791
792			if (m->m_pkthdr.len > (MCLBYTES + RT2573_TX_DESC_SIZE)) {
793				DPRINTFN(0, "data overflow, %u bytes\n",
794				    m->m_pkthdr.len);
795				m->m_pkthdr.len = (MCLBYTES + RT2573_TX_DESC_SIZE);
796			}
797			pc = usbd_xfer_get_frame(xfer, 0);
798			usbd_copy_in(pc, 0, &data->desc, RT2573_TX_DESC_SIZE);
799			usbd_m_copy_in(pc, RT2573_TX_DESC_SIZE, m, 0,
800			    m->m_pkthdr.len);
801
802			vap = data->ni->ni_vap;
803			if (ieee80211_radiotap_active_vap(vap)) {
804				struct rum_tx_radiotap_header *tap = &sc->sc_txtap;
805
806				tap->wt_flags = 0;
807				tap->wt_rate = data->rate;
808				tap->wt_antenna = sc->tx_ant;
809
810				ieee80211_radiotap_tx(vap, m);
811			}
812
813			/* align end on a 4-bytes boundary */
814			len = (RT2573_TX_DESC_SIZE + m->m_pkthdr.len + 3) & ~3;
815			if ((len % 64) == 0)
816				len += 4;
817
818			DPRINTFN(11, "sending frame len=%u xferlen=%u\n",
819			    m->m_pkthdr.len, len);
820
821			usbd_xfer_set_frame_len(xfer, 0, len);
822			usbd_xfer_set_priv(xfer, data);
823
824			usbd_transfer_submit(xfer);
825		}
826		RUM_UNLOCK(sc);
827		rum_start(ifp);
828		RUM_LOCK(sc);
829		break;
830
831	default:			/* Error */
832		DPRINTFN(11, "transfer error, %s\n",
833		    usbd_errstr(error));
834
835		ifp->if_oerrors++;
836		data = usbd_xfer_get_priv(xfer);
837		if (data != NULL) {
838			rum_tx_free(data, error);
839			usbd_xfer_set_priv(xfer, NULL);
840		}
841
842		if (error != USB_ERR_CANCELLED) {
843			if (error == USB_ERR_TIMEOUT)
844				device_printf(sc->sc_dev, "device timeout\n");
845
846			/*
847			 * Try to clear stall first, also if other
848			 * errors occur, hence clearing stall
849			 * introduces a 50 ms delay:
850			 */
851			usbd_xfer_set_stall(xfer);
852			goto tr_setup;
853		}
854		break;
855	}
856}
857
858static void
859rum_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
860{
861	struct rum_softc *sc = usbd_xfer_softc(xfer);
862	struct ifnet *ifp = sc->sc_ifp;
863	struct ieee80211com *ic = ifp->if_l2com;
864	struct ieee80211_node *ni;
865	struct mbuf *m = NULL;
866	struct usb_page_cache *pc;
867	uint32_t flags;
868	uint8_t rssi = 0;
869	int len;
870
871	usbd_xfer_status(xfer, &len, NULL, NULL, NULL);
872
873	switch (USB_GET_STATE(xfer)) {
874	case USB_ST_TRANSFERRED:
875
876		DPRINTFN(15, "rx done, actlen=%d\n", len);
877
878		if (len < RT2573_RX_DESC_SIZE + IEEE80211_MIN_LEN) {
879			DPRINTF("%s: xfer too short %d\n",
880			    device_get_nameunit(sc->sc_dev), len);
881			ifp->if_ierrors++;
882			goto tr_setup;
883		}
884
885		len -= RT2573_RX_DESC_SIZE;
886		pc = usbd_xfer_get_frame(xfer, 0);
887		usbd_copy_out(pc, 0, &sc->sc_rx_desc, RT2573_RX_DESC_SIZE);
888
889		rssi = rum_get_rssi(sc, sc->sc_rx_desc.rssi);
890		flags = le32toh(sc->sc_rx_desc.flags);
891		if (flags & RT2573_RX_CRC_ERROR) {
892			/*
893		         * This should not happen since we did not
894		         * request to receive those frames when we
895		         * filled RUM_TXRX_CSR2:
896		         */
897			DPRINTFN(5, "PHY or CRC error\n");
898			ifp->if_ierrors++;
899			goto tr_setup;
900		}
901
902		m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
903		if (m == NULL) {
904			DPRINTF("could not allocate mbuf\n");
905			ifp->if_ierrors++;
906			goto tr_setup;
907		}
908		usbd_copy_out(pc, RT2573_RX_DESC_SIZE,
909		    mtod(m, uint8_t *), len);
910
911		/* finalize mbuf */
912		m->m_pkthdr.rcvif = ifp;
913		m->m_pkthdr.len = m->m_len = (flags >> 16) & 0xfff;
914
915		if (ieee80211_radiotap_active(ic)) {
916			struct rum_rx_radiotap_header *tap = &sc->sc_rxtap;
917
918			/* XXX read tsf */
919			tap->wr_flags = 0;
920			tap->wr_rate = ieee80211_plcp2rate(sc->sc_rx_desc.rate,
921			    (flags & RT2573_RX_OFDM) ?
922			    IEEE80211_T_OFDM : IEEE80211_T_CCK);
923			tap->wr_antsignal = RT2573_NOISE_FLOOR + rssi;
924			tap->wr_antnoise = RT2573_NOISE_FLOOR;
925			tap->wr_antenna = sc->rx_ant;
926		}
927		/* FALLTHROUGH */
928	case USB_ST_SETUP:
929tr_setup:
930		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
931		usbd_transfer_submit(xfer);
932
933		/*
934		 * At the end of a USB callback it is always safe to unlock
935		 * the private mutex of a device! That is why we do the
936		 * "ieee80211_input" here, and not some lines up!
937		 */
938		RUM_UNLOCK(sc);
939		if (m) {
940			ni = ieee80211_find_rxnode(ic,
941			    mtod(m, struct ieee80211_frame_min *));
942			if (ni != NULL) {
943				(void) ieee80211_input(ni, m, rssi,
944				    RT2573_NOISE_FLOOR);
945				ieee80211_free_node(ni);
946			} else
947				(void) ieee80211_input_all(ic, m, rssi,
948				    RT2573_NOISE_FLOOR);
949		}
950		if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0 &&
951		    !IFQ_IS_EMPTY(&ifp->if_snd))
952			rum_start(ifp);
953		RUM_LOCK(sc);
954		return;
955
956	default:			/* Error */
957		if (error != USB_ERR_CANCELLED) {
958			/* try to clear stall first */
959			usbd_xfer_set_stall(xfer);
960			goto tr_setup;
961		}
962		return;
963	}
964}
965
966static uint8_t
967rum_plcp_signal(int rate)
968{
969	switch (rate) {
970	/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
971	case 12:	return 0xb;
972	case 18:	return 0xf;
973	case 24:	return 0xa;
974	case 36:	return 0xe;
975	case 48:	return 0x9;
976	case 72:	return 0xd;
977	case 96:	return 0x8;
978	case 108:	return 0xc;
979
980	/* CCK rates (NB: not IEEE std, device-specific) */
981	case 2:		return 0x0;
982	case 4:		return 0x1;
983	case 11:	return 0x2;
984	case 22:	return 0x3;
985	}
986	return 0xff;		/* XXX unsupported/unknown rate */
987}
988
989static void
990rum_setup_tx_desc(struct rum_softc *sc, struct rum_tx_desc *desc,
991    uint32_t flags, uint16_t xflags, int len, int rate)
992{
993	struct ifnet *ifp = sc->sc_ifp;
994	struct ieee80211com *ic = ifp->if_l2com;
995	uint16_t plcp_length;
996	int remainder;
997
998	desc->flags = htole32(flags);
999	desc->flags |= htole32(RT2573_TX_VALID);
1000	desc->flags |= htole32(len << 16);
1001
1002	desc->xflags = htole16(xflags);
1003
1004	desc->wme = htole16(RT2573_QID(0) | RT2573_AIFSN(2) |
1005	    RT2573_LOGCWMIN(4) | RT2573_LOGCWMAX(10));
1006
1007	/* setup PLCP fields */
1008	desc->plcp_signal  = rum_plcp_signal(rate);
1009	desc->plcp_service = 4;
1010
1011	len += IEEE80211_CRC_LEN;
1012	if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) {
1013		desc->flags |= htole32(RT2573_TX_OFDM);
1014
1015		plcp_length = len & 0xfff;
1016		desc->plcp_length_hi = plcp_length >> 6;
1017		desc->plcp_length_lo = plcp_length & 0x3f;
1018	} else {
1019		plcp_length = (16 * len + rate - 1) / rate;
1020		if (rate == 22) {
1021			remainder = (16 * len) % 22;
1022			if (remainder != 0 && remainder < 7)
1023				desc->plcp_service |= RT2573_PLCP_LENGEXT;
1024		}
1025		desc->plcp_length_hi = plcp_length >> 8;
1026		desc->plcp_length_lo = plcp_length & 0xff;
1027
1028		if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
1029			desc->plcp_signal |= 0x08;
1030	}
1031}
1032
1033static int
1034rum_sendprot(struct rum_softc *sc,
1035    const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate)
1036{
1037	struct ieee80211com *ic = ni->ni_ic;
1038	const struct ieee80211_frame *wh;
1039	struct rum_tx_data *data;
1040	struct mbuf *mprot;
1041	int protrate, ackrate, pktlen, flags, isshort;
1042	uint16_t dur;
1043
1044	RUM_LOCK_ASSERT(sc, MA_OWNED);
1045	KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY,
1046	    ("protection %d", prot));
1047
1048	wh = mtod(m, const struct ieee80211_frame *);
1049	pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN;
1050
1051	protrate = ieee80211_ctl_rate(ic->ic_rt, rate);
1052	ackrate = ieee80211_ack_rate(ic->ic_rt, rate);
1053
1054	isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0;
1055	dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort)
1056	    + ieee80211_ack_duration(ic->ic_rt, rate, isshort);
1057	flags = RT2573_TX_MORE_FRAG;
1058	if (prot == IEEE80211_PROT_RTSCTS) {
1059		/* NB: CTS is the same size as an ACK */
1060		dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort);
1061		flags |= RT2573_TX_NEED_ACK;
1062		mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur);
1063	} else {
1064		mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur);
1065	}
1066	if (mprot == NULL) {
1067		/* XXX stat + msg */
1068		return (ENOBUFS);
1069	}
1070	data = STAILQ_FIRST(&sc->tx_free);
1071	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1072	sc->tx_nfree--;
1073
1074	data->m = mprot;
1075	data->ni = ieee80211_ref_node(ni);
1076	data->rate = protrate;
1077	rum_setup_tx_desc(sc, &data->desc, flags, 0, mprot->m_pkthdr.len, protrate);
1078
1079	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1080	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1081
1082	return 0;
1083}
1084
1085static int
1086rum_tx_mgt(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
1087{
1088	struct ieee80211vap *vap = ni->ni_vap;
1089	struct ifnet *ifp = sc->sc_ifp;
1090	struct ieee80211com *ic = ifp->if_l2com;
1091	struct rum_tx_data *data;
1092	struct ieee80211_frame *wh;
1093	const struct ieee80211_txparam *tp;
1094	struct ieee80211_key *k;
1095	uint32_t flags = 0;
1096	uint16_t dur;
1097
1098	RUM_LOCK_ASSERT(sc, MA_OWNED);
1099
1100	data = STAILQ_FIRST(&sc->tx_free);
1101	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1102	sc->tx_nfree--;
1103
1104	wh = mtod(m0, struct ieee80211_frame *);
1105	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
1106		k = ieee80211_crypto_encap(ni, m0);
1107		if (k == NULL) {
1108			m_freem(m0);
1109			return ENOBUFS;
1110		}
1111		wh = mtod(m0, struct ieee80211_frame *);
1112	}
1113
1114	tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
1115
1116	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1117		flags |= RT2573_TX_NEED_ACK;
1118
1119		dur = ieee80211_ack_duration(ic->ic_rt, tp->mgmtrate,
1120		    ic->ic_flags & IEEE80211_F_SHPREAMBLE);
1121		*(uint16_t *)wh->i_dur = htole16(dur);
1122
1123		/* tell hardware to add timestamp for probe responses */
1124		if ((wh->i_fc[0] &
1125		    (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
1126		    (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
1127			flags |= RT2573_TX_TIMESTAMP;
1128	}
1129
1130	data->m = m0;
1131	data->ni = ni;
1132	data->rate = tp->mgmtrate;
1133
1134	rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, tp->mgmtrate);
1135
1136	DPRINTFN(10, "sending mgt frame len=%d rate=%d\n",
1137	    m0->m_pkthdr.len + (int)RT2573_TX_DESC_SIZE, tp->mgmtrate);
1138
1139	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1140	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1141
1142	return (0);
1143}
1144
1145static int
1146rum_tx_raw(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni,
1147    const struct ieee80211_bpf_params *params)
1148{
1149	struct ieee80211com *ic = ni->ni_ic;
1150	struct rum_tx_data *data;
1151	uint32_t flags;
1152	int rate, error;
1153
1154	RUM_LOCK_ASSERT(sc, MA_OWNED);
1155	KASSERT(params != NULL, ("no raw xmit params"));
1156
1157	rate = params->ibp_rate0;
1158	if (!ieee80211_isratevalid(ic->ic_rt, rate)) {
1159		m_freem(m0);
1160		return EINVAL;
1161	}
1162	flags = 0;
1163	if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0)
1164		flags |= RT2573_TX_NEED_ACK;
1165	if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) {
1166		error = rum_sendprot(sc, m0, ni,
1167		    params->ibp_flags & IEEE80211_BPF_RTS ?
1168			 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY,
1169		    rate);
1170		if (error || sc->tx_nfree == 0) {
1171			m_freem(m0);
1172			return ENOBUFS;
1173		}
1174		flags |= RT2573_TX_LONG_RETRY | RT2573_TX_IFS_SIFS;
1175	}
1176
1177	data = STAILQ_FIRST(&sc->tx_free);
1178	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1179	sc->tx_nfree--;
1180
1181	data->m = m0;
1182	data->ni = ni;
1183	data->rate = rate;
1184
1185	/* XXX need to setup descriptor ourself */
1186	rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, rate);
1187
1188	DPRINTFN(10, "sending raw frame len=%u rate=%u\n",
1189	    m0->m_pkthdr.len, rate);
1190
1191	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1192	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1193
1194	return 0;
1195}
1196
1197static int
1198rum_tx_data(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
1199{
1200	struct ieee80211vap *vap = ni->ni_vap;
1201	struct ifnet *ifp = sc->sc_ifp;
1202	struct ieee80211com *ic = ifp->if_l2com;
1203	struct rum_tx_data *data;
1204	struct ieee80211_frame *wh;
1205	const struct ieee80211_txparam *tp;
1206	struct ieee80211_key *k;
1207	uint32_t flags = 0;
1208	uint16_t dur;
1209	int error, rate;
1210
1211	RUM_LOCK_ASSERT(sc, MA_OWNED);
1212
1213	wh = mtod(m0, struct ieee80211_frame *);
1214
1215	tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)];
1216	if (IEEE80211_IS_MULTICAST(wh->i_addr1))
1217		rate = tp->mcastrate;
1218	else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE)
1219		rate = tp->ucastrate;
1220	else
1221		rate = ni->ni_txrate;
1222
1223	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
1224		k = ieee80211_crypto_encap(ni, m0);
1225		if (k == NULL) {
1226			m_freem(m0);
1227			return ENOBUFS;
1228		}
1229
1230		/* packet header may have moved, reset our local pointer */
1231		wh = mtod(m0, struct ieee80211_frame *);
1232	}
1233
1234	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1235		int prot = IEEE80211_PROT_NONE;
1236		if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold)
1237			prot = IEEE80211_PROT_RTSCTS;
1238		else if ((ic->ic_flags & IEEE80211_F_USEPROT) &&
1239		    ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM)
1240			prot = ic->ic_protmode;
1241		if (prot != IEEE80211_PROT_NONE) {
1242			error = rum_sendprot(sc, m0, ni, prot, rate);
1243			if (error || sc->tx_nfree == 0) {
1244				m_freem(m0);
1245				return ENOBUFS;
1246			}
1247			flags |= RT2573_TX_LONG_RETRY | RT2573_TX_IFS_SIFS;
1248		}
1249	}
1250
1251	data = STAILQ_FIRST(&sc->tx_free);
1252	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1253	sc->tx_nfree--;
1254
1255	data->m = m0;
1256	data->ni = ni;
1257	data->rate = rate;
1258
1259	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1260		flags |= RT2573_TX_NEED_ACK;
1261		flags |= RT2573_TX_MORE_FRAG;
1262
1263		dur = ieee80211_ack_duration(ic->ic_rt, rate,
1264		    ic->ic_flags & IEEE80211_F_SHPREAMBLE);
1265		*(uint16_t *)wh->i_dur = htole16(dur);
1266	}
1267
1268	rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, rate);
1269
1270	DPRINTFN(10, "sending frame len=%d rate=%d\n",
1271	    m0->m_pkthdr.len + (int)RT2573_TX_DESC_SIZE, rate);
1272
1273	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1274	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1275
1276	return 0;
1277}
1278
1279static void
1280rum_start(struct ifnet *ifp)
1281{
1282	struct rum_softc *sc = ifp->if_softc;
1283	struct ieee80211_node *ni;
1284	struct mbuf *m;
1285
1286	RUM_LOCK(sc);
1287	if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
1288		RUM_UNLOCK(sc);
1289		return;
1290	}
1291	for (;;) {
1292		IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
1293		if (m == NULL)
1294			break;
1295		if (sc->tx_nfree < RUM_TX_MINFREE) {
1296			IFQ_DRV_PREPEND(&ifp->if_snd, m);
1297			ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1298			break;
1299		}
1300		ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
1301		if (rum_tx_data(sc, m, ni) != 0) {
1302			ieee80211_free_node(ni);
1303			ifp->if_oerrors++;
1304			break;
1305		}
1306	}
1307	RUM_UNLOCK(sc);
1308}
1309
1310static int
1311rum_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
1312{
1313	struct rum_softc *sc = ifp->if_softc;
1314	struct ieee80211com *ic = ifp->if_l2com;
1315	struct ifreq *ifr = (struct ifreq *) data;
1316	int error = 0, startall = 0;
1317
1318	switch (cmd) {
1319	case SIOCSIFFLAGS:
1320		RUM_LOCK(sc);
1321		if (ifp->if_flags & IFF_UP) {
1322			if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
1323				rum_init_locked(sc);
1324				startall = 1;
1325			} else
1326				rum_setpromisc(sc);
1327		} else {
1328			if (ifp->if_drv_flags & IFF_DRV_RUNNING)
1329				rum_stop(sc);
1330		}
1331		RUM_UNLOCK(sc);
1332		if (startall)
1333			ieee80211_start_all(ic);
1334		break;
1335	case SIOCGIFMEDIA:
1336		error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
1337		break;
1338	case SIOCGIFADDR:
1339		error = ether_ioctl(ifp, cmd, data);
1340		break;
1341	default:
1342		error = EINVAL;
1343		break;
1344	}
1345	return error;
1346}
1347
1348static void
1349rum_eeprom_read(struct rum_softc *sc, uint16_t addr, void *buf, int len)
1350{
1351	struct usb_device_request req;
1352	usb_error_t error;
1353
1354	req.bmRequestType = UT_READ_VENDOR_DEVICE;
1355	req.bRequest = RT2573_READ_EEPROM;
1356	USETW(req.wValue, 0);
1357	USETW(req.wIndex, addr);
1358	USETW(req.wLength, len);
1359
1360	error = rum_do_request(sc, &req, buf);
1361	if (error != 0) {
1362		device_printf(sc->sc_dev, "could not read EEPROM: %s\n",
1363		    usbd_errstr(error));
1364	}
1365}
1366
1367static uint32_t
1368rum_read(struct rum_softc *sc, uint16_t reg)
1369{
1370	uint32_t val;
1371
1372	rum_read_multi(sc, reg, &val, sizeof val);
1373
1374	return le32toh(val);
1375}
1376
1377static void
1378rum_read_multi(struct rum_softc *sc, uint16_t reg, void *buf, int len)
1379{
1380	struct usb_device_request req;
1381	usb_error_t error;
1382
1383	req.bmRequestType = UT_READ_VENDOR_DEVICE;
1384	req.bRequest = RT2573_READ_MULTI_MAC;
1385	USETW(req.wValue, 0);
1386	USETW(req.wIndex, reg);
1387	USETW(req.wLength, len);
1388
1389	error = rum_do_request(sc, &req, buf);
1390	if (error != 0) {
1391		device_printf(sc->sc_dev,
1392		    "could not multi read MAC register: %s\n",
1393		    usbd_errstr(error));
1394	}
1395}
1396
1397static usb_error_t
1398rum_write(struct rum_softc *sc, uint16_t reg, uint32_t val)
1399{
1400	uint32_t tmp = htole32(val);
1401
1402	return (rum_write_multi(sc, reg, &tmp, sizeof tmp));
1403}
1404
1405static usb_error_t
1406rum_write_multi(struct rum_softc *sc, uint16_t reg, void *buf, size_t len)
1407{
1408	struct usb_device_request req;
1409	usb_error_t error;
1410	int offset;
1411
1412	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
1413	req.bRequest = RT2573_WRITE_MULTI_MAC;
1414	USETW(req.wValue, 0);
1415
1416	/* write at most 64 bytes at a time */
1417	for (offset = 0; offset < len; offset += 64) {
1418		USETW(req.wIndex, reg + offset);
1419		USETW(req.wLength, MIN(len - offset, 64));
1420
1421		error = rum_do_request(sc, &req, (char *)buf + offset);
1422		if (error != 0) {
1423			device_printf(sc->sc_dev,
1424			    "could not multi write MAC register: %s\n",
1425			    usbd_errstr(error));
1426			return (error);
1427		}
1428	}
1429
1430	return (USB_ERR_NORMAL_COMPLETION);
1431}
1432
1433static void
1434rum_bbp_write(struct rum_softc *sc, uint8_t reg, uint8_t val)
1435{
1436	uint32_t tmp;
1437	int ntries;
1438
1439	DPRINTFN(2, "reg=0x%08x\n", reg);
1440
1441	for (ntries = 0; ntries < 100; ntries++) {
1442		if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY))
1443			break;
1444		if (rum_pause(sc, hz / 100))
1445			break;
1446	}
1447	if (ntries == 100) {
1448		device_printf(sc->sc_dev, "could not write to BBP\n");
1449		return;
1450	}
1451
1452	tmp = RT2573_BBP_BUSY | (reg & 0x7f) << 8 | val;
1453	rum_write(sc, RT2573_PHY_CSR3, tmp);
1454}
1455
1456static uint8_t
1457rum_bbp_read(struct rum_softc *sc, uint8_t reg)
1458{
1459	uint32_t val;
1460	int ntries;
1461
1462	DPRINTFN(2, "reg=0x%08x\n", reg);
1463
1464	for (ntries = 0; ntries < 100; ntries++) {
1465		if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY))
1466			break;
1467		if (rum_pause(sc, hz / 100))
1468			break;
1469	}
1470	if (ntries == 100) {
1471		device_printf(sc->sc_dev, "could not read BBP\n");
1472		return 0;
1473	}
1474
1475	val = RT2573_BBP_BUSY | RT2573_BBP_READ | reg << 8;
1476	rum_write(sc, RT2573_PHY_CSR3, val);
1477
1478	for (ntries = 0; ntries < 100; ntries++) {
1479		val = rum_read(sc, RT2573_PHY_CSR3);
1480		if (!(val & RT2573_BBP_BUSY))
1481			return val & 0xff;
1482		if (rum_pause(sc, hz / 100))
1483			break;
1484	}
1485
1486	device_printf(sc->sc_dev, "could not read BBP\n");
1487	return 0;
1488}
1489
1490static void
1491rum_rf_write(struct rum_softc *sc, uint8_t reg, uint32_t val)
1492{
1493	uint32_t tmp;
1494	int ntries;
1495
1496	for (ntries = 0; ntries < 100; ntries++) {
1497		if (!(rum_read(sc, RT2573_PHY_CSR4) & RT2573_RF_BUSY))
1498			break;
1499		if (rum_pause(sc, hz / 100))
1500			break;
1501	}
1502	if (ntries == 100) {
1503		device_printf(sc->sc_dev, "could not write to RF\n");
1504		return;
1505	}
1506
1507	tmp = RT2573_RF_BUSY | RT2573_RF_20BIT | (val & 0xfffff) << 2 |
1508	    (reg & 3);
1509	rum_write(sc, RT2573_PHY_CSR4, tmp);
1510
1511	/* remember last written value in sc */
1512	sc->rf_regs[reg] = val;
1513
1514	DPRINTFN(15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0xfffff);
1515}
1516
1517static void
1518rum_select_antenna(struct rum_softc *sc)
1519{
1520	uint8_t bbp4, bbp77;
1521	uint32_t tmp;
1522
1523	bbp4  = rum_bbp_read(sc, 4);
1524	bbp77 = rum_bbp_read(sc, 77);
1525
1526	/* TBD */
1527
1528	/* make sure Rx is disabled before switching antenna */
1529	tmp = rum_read(sc, RT2573_TXRX_CSR0);
1530	rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX);
1531
1532	rum_bbp_write(sc,  4, bbp4);
1533	rum_bbp_write(sc, 77, bbp77);
1534
1535	rum_write(sc, RT2573_TXRX_CSR0, tmp);
1536}
1537
1538/*
1539 * Enable multi-rate retries for frames sent at OFDM rates.
1540 * In 802.11b/g mode, allow fallback to CCK rates.
1541 */
1542static void
1543rum_enable_mrr(struct rum_softc *sc)
1544{
1545	struct ifnet *ifp = sc->sc_ifp;
1546	struct ieee80211com *ic = ifp->if_l2com;
1547	uint32_t tmp;
1548
1549	tmp = rum_read(sc, RT2573_TXRX_CSR4);
1550
1551	tmp &= ~RT2573_MRR_CCK_FALLBACK;
1552	if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
1553		tmp |= RT2573_MRR_CCK_FALLBACK;
1554	tmp |= RT2573_MRR_ENABLED;
1555
1556	rum_write(sc, RT2573_TXRX_CSR4, tmp);
1557}
1558
1559static void
1560rum_set_txpreamble(struct rum_softc *sc)
1561{
1562	struct ifnet *ifp = sc->sc_ifp;
1563	struct ieee80211com *ic = ifp->if_l2com;
1564	uint32_t tmp;
1565
1566	tmp = rum_read(sc, RT2573_TXRX_CSR4);
1567
1568	tmp &= ~RT2573_SHORT_PREAMBLE;
1569	if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
1570		tmp |= RT2573_SHORT_PREAMBLE;
1571
1572	rum_write(sc, RT2573_TXRX_CSR4, tmp);
1573}
1574
1575static void
1576rum_set_basicrates(struct rum_softc *sc)
1577{
1578	struct ifnet *ifp = sc->sc_ifp;
1579	struct ieee80211com *ic = ifp->if_l2com;
1580
1581	/* update basic rate set */
1582	if (ic->ic_curmode == IEEE80211_MODE_11B) {
1583		/* 11b basic rates: 1, 2Mbps */
1584		rum_write(sc, RT2573_TXRX_CSR5, 0x3);
1585	} else if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) {
1586		/* 11a basic rates: 6, 12, 24Mbps */
1587		rum_write(sc, RT2573_TXRX_CSR5, 0x150);
1588	} else {
1589		/* 11b/g basic rates: 1, 2, 5.5, 11Mbps */
1590		rum_write(sc, RT2573_TXRX_CSR5, 0xf);
1591	}
1592}
1593
1594/*
1595 * Reprogram MAC/BBP to switch to a new band.  Values taken from the reference
1596 * driver.
1597 */
1598static void
1599rum_select_band(struct rum_softc *sc, struct ieee80211_channel *c)
1600{
1601	uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104;
1602	uint32_t tmp;
1603
1604	/* update all BBP registers that depend on the band */
1605	bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c;
1606	bbp35 = 0x50; bbp97 = 0x48; bbp98  = 0x48;
1607	if (IEEE80211_IS_CHAN_5GHZ(c)) {
1608		bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c;
1609		bbp35 += 0x10; bbp97 += 0x10; bbp98  += 0x10;
1610	}
1611	if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
1612	    (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
1613		bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10;
1614	}
1615
1616	sc->bbp17 = bbp17;
1617	rum_bbp_write(sc,  17, bbp17);
1618	rum_bbp_write(sc,  96, bbp96);
1619	rum_bbp_write(sc, 104, bbp104);
1620
1621	if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
1622	    (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
1623		rum_bbp_write(sc, 75, 0x80);
1624		rum_bbp_write(sc, 86, 0x80);
1625		rum_bbp_write(sc, 88, 0x80);
1626	}
1627
1628	rum_bbp_write(sc, 35, bbp35);
1629	rum_bbp_write(sc, 97, bbp97);
1630	rum_bbp_write(sc, 98, bbp98);
1631
1632	tmp = rum_read(sc, RT2573_PHY_CSR0);
1633	tmp &= ~(RT2573_PA_PE_2GHZ | RT2573_PA_PE_5GHZ);
1634	if (IEEE80211_IS_CHAN_2GHZ(c))
1635		tmp |= RT2573_PA_PE_2GHZ;
1636	else
1637		tmp |= RT2573_PA_PE_5GHZ;
1638	rum_write(sc, RT2573_PHY_CSR0, tmp);
1639}
1640
1641static void
1642rum_set_chan(struct rum_softc *sc, struct ieee80211_channel *c)
1643{
1644	struct ifnet *ifp = sc->sc_ifp;
1645	struct ieee80211com *ic = ifp->if_l2com;
1646	const struct rfprog *rfprog;
1647	uint8_t bbp3, bbp94 = RT2573_BBPR94_DEFAULT;
1648	int8_t power;
1649	int i, chan;
1650
1651	chan = ieee80211_chan2ieee(ic, c);
1652	if (chan == 0 || chan == IEEE80211_CHAN_ANY)
1653		return;
1654
1655	/* select the appropriate RF settings based on what EEPROM says */
1656	rfprog = (sc->rf_rev == RT2573_RF_5225 ||
1657		  sc->rf_rev == RT2573_RF_2527) ? rum_rf5225 : rum_rf5226;
1658
1659	/* find the settings for this channel (we know it exists) */
1660	for (i = 0; rfprog[i].chan != chan; i++);
1661
1662	power = sc->txpow[i];
1663	if (power < 0) {
1664		bbp94 += power;
1665		power = 0;
1666	} else if (power > 31) {
1667		bbp94 += power - 31;
1668		power = 31;
1669	}
1670
1671	/*
1672	 * If we are switching from the 2GHz band to the 5GHz band or
1673	 * vice-versa, BBP registers need to be reprogrammed.
1674	 */
1675	if (c->ic_flags != ic->ic_curchan->ic_flags) {
1676		rum_select_band(sc, c);
1677		rum_select_antenna(sc);
1678	}
1679	ic->ic_curchan = c;
1680
1681	rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1682	rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1683	rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7);
1684	rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1685
1686	rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1687	rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1688	rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7 | 1);
1689	rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1690
1691	rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1692	rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1693	rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7);
1694	rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1695
1696	rum_pause(sc, hz / 100);
1697
1698	/* enable smart mode for MIMO-capable RFs */
1699	bbp3 = rum_bbp_read(sc, 3);
1700
1701	bbp3 &= ~RT2573_SMART_MODE;
1702	if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_2527)
1703		bbp3 |= RT2573_SMART_MODE;
1704
1705	rum_bbp_write(sc, 3, bbp3);
1706
1707	if (bbp94 != RT2573_BBPR94_DEFAULT)
1708		rum_bbp_write(sc, 94, bbp94);
1709
1710	/* give the chip some extra time to do the switchover */
1711	rum_pause(sc, hz / 100);
1712}
1713
1714/*
1715 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS
1716 * and HostAP operating modes.
1717 */
1718static void
1719rum_enable_tsf_sync(struct rum_softc *sc)
1720{
1721	struct ifnet *ifp = sc->sc_ifp;
1722	struct ieee80211com *ic = ifp->if_l2com;
1723	struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
1724	uint32_t tmp;
1725
1726	if (vap->iv_opmode != IEEE80211_M_STA) {
1727		/*
1728		 * Change default 16ms TBTT adjustment to 8ms.
1729		 * Must be done before enabling beacon generation.
1730		 */
1731		rum_write(sc, RT2573_TXRX_CSR10, 1 << 12 | 8);
1732	}
1733
1734	tmp = rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000;
1735
1736	/* set beacon interval (in 1/16ms unit) */
1737	tmp |= vap->iv_bss->ni_intval * 16;
1738
1739	tmp |= RT2573_TSF_TICKING | RT2573_ENABLE_TBTT;
1740	if (vap->iv_opmode == IEEE80211_M_STA)
1741		tmp |= RT2573_TSF_MODE(1);
1742	else
1743		tmp |= RT2573_TSF_MODE(2) | RT2573_GENERATE_BEACON;
1744
1745	rum_write(sc, RT2573_TXRX_CSR9, tmp);
1746}
1747
1748static void
1749rum_enable_tsf(struct rum_softc *sc)
1750{
1751	rum_write(sc, RT2573_TXRX_CSR9,
1752	    (rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000) |
1753	    RT2573_TSF_TICKING | RT2573_TSF_MODE(2));
1754}
1755
1756static void
1757rum_update_slot(struct ifnet *ifp)
1758{
1759	struct rum_softc *sc = ifp->if_softc;
1760	struct ieee80211com *ic = ifp->if_l2com;
1761	uint8_t slottime;
1762	uint32_t tmp;
1763
1764	slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
1765
1766	tmp = rum_read(sc, RT2573_MAC_CSR9);
1767	tmp = (tmp & ~0xff) | slottime;
1768	rum_write(sc, RT2573_MAC_CSR9, tmp);
1769
1770	DPRINTF("setting slot time to %uus\n", slottime);
1771}
1772
1773static void
1774rum_set_bssid(struct rum_softc *sc, const uint8_t *bssid)
1775{
1776	uint32_t tmp;
1777
1778	tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24;
1779	rum_write(sc, RT2573_MAC_CSR4, tmp);
1780
1781	tmp = bssid[4] | bssid[5] << 8 | RT2573_ONE_BSSID << 16;
1782	rum_write(sc, RT2573_MAC_CSR5, tmp);
1783}
1784
1785static void
1786rum_set_macaddr(struct rum_softc *sc, const uint8_t *addr)
1787{
1788	uint32_t tmp;
1789
1790	tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24;
1791	rum_write(sc, RT2573_MAC_CSR2, tmp);
1792
1793	tmp = addr[4] | addr[5] << 8 | 0xff << 16;
1794	rum_write(sc, RT2573_MAC_CSR3, tmp);
1795}
1796
1797static void
1798rum_setpromisc(struct rum_softc *sc)
1799{
1800	struct ifnet *ifp = sc->sc_ifp;
1801	uint32_t tmp;
1802
1803	tmp = rum_read(sc, RT2573_TXRX_CSR0);
1804
1805	tmp &= ~RT2573_DROP_NOT_TO_ME;
1806	if (!(ifp->if_flags & IFF_PROMISC))
1807		tmp |= RT2573_DROP_NOT_TO_ME;
1808
1809	rum_write(sc, RT2573_TXRX_CSR0, tmp);
1810
1811	DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ?
1812	    "entering" : "leaving");
1813}
1814
1815static void
1816rum_update_promisc(struct ifnet *ifp)
1817{
1818	struct rum_softc *sc = ifp->if_softc;
1819
1820	if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
1821		return;
1822
1823	RUM_LOCK(sc);
1824	rum_setpromisc(sc);
1825	RUM_UNLOCK(sc);
1826}
1827
1828static void
1829rum_update_mcast(struct ifnet *ifp)
1830{
1831	static int warning_printed;
1832
1833	if (warning_printed == 0) {
1834		if_printf(ifp, "need to implement %s\n", __func__);
1835		warning_printed = 1;
1836	}
1837}
1838
1839static const char *
1840rum_get_rf(int rev)
1841{
1842	switch (rev) {
1843	case RT2573_RF_2527:	return "RT2527 (MIMO XR)";
1844	case RT2573_RF_2528:	return "RT2528";
1845	case RT2573_RF_5225:	return "RT5225 (MIMO XR)";
1846	case RT2573_RF_5226:	return "RT5226";
1847	default:		return "unknown";
1848	}
1849}
1850
1851static void
1852rum_read_eeprom(struct rum_softc *sc)
1853{
1854	uint16_t val;
1855#ifdef RUM_DEBUG
1856	int i;
1857#endif
1858
1859	/* read MAC address */
1860	rum_eeprom_read(sc, RT2573_EEPROM_ADDRESS, sc->sc_bssid, 6);
1861
1862	rum_eeprom_read(sc, RT2573_EEPROM_ANTENNA, &val, 2);
1863	val = le16toh(val);
1864	sc->rf_rev =   (val >> 11) & 0x1f;
1865	sc->hw_radio = (val >> 10) & 0x1;
1866	sc->rx_ant =   (val >> 4)  & 0x3;
1867	sc->tx_ant =   (val >> 2)  & 0x3;
1868	sc->nb_ant =   val & 0x3;
1869
1870	DPRINTF("RF revision=%d\n", sc->rf_rev);
1871
1872	rum_eeprom_read(sc, RT2573_EEPROM_CONFIG2, &val, 2);
1873	val = le16toh(val);
1874	sc->ext_5ghz_lna = (val >> 6) & 0x1;
1875	sc->ext_2ghz_lna = (val >> 4) & 0x1;
1876
1877	DPRINTF("External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n",
1878	    sc->ext_2ghz_lna, sc->ext_5ghz_lna);
1879
1880	rum_eeprom_read(sc, RT2573_EEPROM_RSSI_2GHZ_OFFSET, &val, 2);
1881	val = le16toh(val);
1882	if ((val & 0xff) != 0xff)
1883		sc->rssi_2ghz_corr = (int8_t)(val & 0xff);	/* signed */
1884
1885	/* Only [-10, 10] is valid */
1886	if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10)
1887		sc->rssi_2ghz_corr = 0;
1888
1889	rum_eeprom_read(sc, RT2573_EEPROM_RSSI_5GHZ_OFFSET, &val, 2);
1890	val = le16toh(val);
1891	if ((val & 0xff) != 0xff)
1892		sc->rssi_5ghz_corr = (int8_t)(val & 0xff);	/* signed */
1893
1894	/* Only [-10, 10] is valid */
1895	if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10)
1896		sc->rssi_5ghz_corr = 0;
1897
1898	if (sc->ext_2ghz_lna)
1899		sc->rssi_2ghz_corr -= 14;
1900	if (sc->ext_5ghz_lna)
1901		sc->rssi_5ghz_corr -= 14;
1902
1903	DPRINTF("RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n",
1904	    sc->rssi_2ghz_corr, sc->rssi_5ghz_corr);
1905
1906	rum_eeprom_read(sc, RT2573_EEPROM_FREQ_OFFSET, &val, 2);
1907	val = le16toh(val);
1908	if ((val & 0xff) != 0xff)
1909		sc->rffreq = val & 0xff;
1910
1911	DPRINTF("RF freq=%d\n", sc->rffreq);
1912
1913	/* read Tx power for all a/b/g channels */
1914	rum_eeprom_read(sc, RT2573_EEPROM_TXPOWER, sc->txpow, 14);
1915	/* XXX default Tx power for 802.11a channels */
1916	memset(sc->txpow + 14, 24, sizeof (sc->txpow) - 14);
1917#ifdef RUM_DEBUG
1918	for (i = 0; i < 14; i++)
1919		DPRINTF("Channel=%d Tx power=%d\n", i + 1,  sc->txpow[i]);
1920#endif
1921
1922	/* read default values for BBP registers */
1923	rum_eeprom_read(sc, RT2573_EEPROM_BBP_BASE, sc->bbp_prom, 2 * 16);
1924#ifdef RUM_DEBUG
1925	for (i = 0; i < 14; i++) {
1926		if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff)
1927			continue;
1928		DPRINTF("BBP R%d=%02x\n", sc->bbp_prom[i].reg,
1929		    sc->bbp_prom[i].val);
1930	}
1931#endif
1932}
1933
1934static int
1935rum_bbp_init(struct rum_softc *sc)
1936{
1937#define N(a)	(sizeof (a) / sizeof ((a)[0]))
1938	int i, ntries;
1939
1940	/* wait for BBP to be ready */
1941	for (ntries = 0; ntries < 100; ntries++) {
1942		const uint8_t val = rum_bbp_read(sc, 0);
1943		if (val != 0 && val != 0xff)
1944			break;
1945		if (rum_pause(sc, hz / 100))
1946			break;
1947	}
1948	if (ntries == 100) {
1949		device_printf(sc->sc_dev, "timeout waiting for BBP\n");
1950		return EIO;
1951	}
1952
1953	/* initialize BBP registers to default values */
1954	for (i = 0; i < N(rum_def_bbp); i++)
1955		rum_bbp_write(sc, rum_def_bbp[i].reg, rum_def_bbp[i].val);
1956
1957	/* write vendor-specific BBP values (from EEPROM) */
1958	for (i = 0; i < 16; i++) {
1959		if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff)
1960			continue;
1961		rum_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val);
1962	}
1963
1964	return 0;
1965#undef N
1966}
1967
1968static void
1969rum_init_locked(struct rum_softc *sc)
1970{
1971#define N(a)	(sizeof (a) / sizeof ((a)[0]))
1972	struct ifnet *ifp = sc->sc_ifp;
1973	struct ieee80211com *ic = ifp->if_l2com;
1974	uint32_t tmp;
1975	usb_error_t error;
1976	int i, ntries;
1977
1978	RUM_LOCK_ASSERT(sc, MA_OWNED);
1979
1980	rum_stop(sc);
1981
1982	/* initialize MAC registers to default values */
1983	for (i = 0; i < N(rum_def_mac); i++)
1984		rum_write(sc, rum_def_mac[i].reg, rum_def_mac[i].val);
1985
1986	/* set host ready */
1987	rum_write(sc, RT2573_MAC_CSR1, 3);
1988	rum_write(sc, RT2573_MAC_CSR1, 0);
1989
1990	/* wait for BBP/RF to wakeup */
1991	for (ntries = 0; ntries < 100; ntries++) {
1992		if (rum_read(sc, RT2573_MAC_CSR12) & 8)
1993			break;
1994		rum_write(sc, RT2573_MAC_CSR12, 4);	/* force wakeup */
1995		if (rum_pause(sc, hz / 100))
1996			break;
1997	}
1998	if (ntries == 100) {
1999		device_printf(sc->sc_dev,
2000		    "timeout waiting for BBP/RF to wakeup\n");
2001		goto fail;
2002	}
2003
2004	if ((error = rum_bbp_init(sc)) != 0)
2005		goto fail;
2006
2007	/* select default channel */
2008	rum_select_band(sc, ic->ic_curchan);
2009	rum_select_antenna(sc);
2010	rum_set_chan(sc, ic->ic_curchan);
2011
2012	/* clear STA registers */
2013	rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
2014
2015	rum_set_macaddr(sc, IF_LLADDR(ifp));
2016
2017	/* initialize ASIC */
2018	rum_write(sc, RT2573_MAC_CSR1, 4);
2019
2020	/*
2021	 * Allocate Tx and Rx xfer queues.
2022	 */
2023	rum_setup_tx_list(sc);
2024
2025	/* update Rx filter */
2026	tmp = rum_read(sc, RT2573_TXRX_CSR0) & 0xffff;
2027
2028	tmp |= RT2573_DROP_PHY_ERROR | RT2573_DROP_CRC_ERROR;
2029	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
2030		tmp |= RT2573_DROP_CTL | RT2573_DROP_VER_ERROR |
2031		       RT2573_DROP_ACKCTS;
2032		if (ic->ic_opmode != IEEE80211_M_HOSTAP)
2033			tmp |= RT2573_DROP_TODS;
2034		if (!(ifp->if_flags & IFF_PROMISC))
2035			tmp |= RT2573_DROP_NOT_TO_ME;
2036	}
2037	rum_write(sc, RT2573_TXRX_CSR0, tmp);
2038
2039	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
2040	ifp->if_drv_flags |= IFF_DRV_RUNNING;
2041	usbd_xfer_set_stall(sc->sc_xfer[RUM_BULK_WR]);
2042	usbd_transfer_start(sc->sc_xfer[RUM_BULK_RD]);
2043	return;
2044
2045fail:	rum_stop(sc);
2046#undef N
2047}
2048
2049static void
2050rum_init(void *priv)
2051{
2052	struct rum_softc *sc = priv;
2053	struct ifnet *ifp = sc->sc_ifp;
2054	struct ieee80211com *ic = ifp->if_l2com;
2055
2056	RUM_LOCK(sc);
2057	rum_init_locked(sc);
2058	RUM_UNLOCK(sc);
2059
2060	if (ifp->if_drv_flags & IFF_DRV_RUNNING)
2061		ieee80211_start_all(ic);		/* start all vap's */
2062}
2063
2064static void
2065rum_stop(struct rum_softc *sc)
2066{
2067	struct ifnet *ifp = sc->sc_ifp;
2068	uint32_t tmp;
2069
2070	RUM_LOCK_ASSERT(sc, MA_OWNED);
2071
2072	ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
2073
2074	RUM_UNLOCK(sc);
2075
2076	/*
2077	 * Drain the USB transfers, if not already drained:
2078	 */
2079	usbd_transfer_drain(sc->sc_xfer[RUM_BULK_WR]);
2080	usbd_transfer_drain(sc->sc_xfer[RUM_BULK_RD]);
2081
2082	RUM_LOCK(sc);
2083
2084	rum_unsetup_tx_list(sc);
2085
2086	/* disable Rx */
2087	tmp = rum_read(sc, RT2573_TXRX_CSR0);
2088	rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX);
2089
2090	/* reset ASIC */
2091	rum_write(sc, RT2573_MAC_CSR1, 3);
2092	rum_write(sc, RT2573_MAC_CSR1, 0);
2093}
2094
2095static void
2096rum_load_microcode(struct rum_softc *sc, const uint8_t *ucode, size_t size)
2097{
2098	struct usb_device_request req;
2099	uint16_t reg = RT2573_MCU_CODE_BASE;
2100	usb_error_t err;
2101
2102	/* copy firmware image into NIC */
2103	for (; size >= 4; reg += 4, ucode += 4, size -= 4) {
2104		err = rum_write(sc, reg, UGETDW(ucode));
2105		if (err) {
2106			/* firmware already loaded ? */
2107			device_printf(sc->sc_dev, "Firmware load "
2108			    "failure! (ignored)\n");
2109			break;
2110		}
2111	}
2112
2113	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
2114	req.bRequest = RT2573_MCU_CNTL;
2115	USETW(req.wValue, RT2573_MCU_RUN);
2116	USETW(req.wIndex, 0);
2117	USETW(req.wLength, 0);
2118
2119	err = rum_do_request(sc, &req, NULL);
2120	if (err != 0) {
2121		device_printf(sc->sc_dev, "could not run firmware: %s\n",
2122		    usbd_errstr(err));
2123	}
2124
2125	/* give the chip some time to boot */
2126	rum_pause(sc, hz / 8);
2127}
2128
2129static void
2130rum_prepare_beacon(struct rum_softc *sc, struct ieee80211vap *vap)
2131{
2132	struct ieee80211com *ic = vap->iv_ic;
2133	const struct ieee80211_txparam *tp;
2134	struct rum_tx_desc desc;
2135	struct mbuf *m0;
2136
2137	if (vap->iv_bss->ni_chan == IEEE80211_CHAN_ANYC)
2138		return;
2139
2140	m0 = ieee80211_beacon_alloc(vap->iv_bss, &RUM_VAP(vap)->bo);
2141	if (m0 == NULL) {
2142		return;
2143	}
2144
2145	tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_bsschan)];
2146	rum_setup_tx_desc(sc, &desc, RT2573_TX_TIMESTAMP, RT2573_TX_HWSEQ,
2147	    m0->m_pkthdr.len, tp->mgmtrate);
2148
2149	/* copy the first 24 bytes of Tx descriptor into NIC memory */
2150	rum_write_multi(sc, RT2573_HW_BEACON_BASE0, (uint8_t *)&desc, 24);
2151
2152	/* copy beacon header and payload into NIC memory */
2153	rum_write_multi(sc, RT2573_HW_BEACON_BASE0 + 24, mtod(m0, uint8_t *),
2154	    m0->m_pkthdr.len);
2155
2156	m_freem(m0);
2157}
2158
2159static int
2160rum_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
2161    const struct ieee80211_bpf_params *params)
2162{
2163	struct ifnet *ifp = ni->ni_ic->ic_ifp;
2164	struct rum_softc *sc = ifp->if_softc;
2165
2166	RUM_LOCK(sc);
2167	/* prevent management frames from being sent if we're not ready */
2168	if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
2169		RUM_UNLOCK(sc);
2170		m_freem(m);
2171		ieee80211_free_node(ni);
2172		return ENETDOWN;
2173	}
2174	if (sc->tx_nfree < RUM_TX_MINFREE) {
2175		ifp->if_drv_flags |= IFF_DRV_OACTIVE;
2176		RUM_UNLOCK(sc);
2177		m_freem(m);
2178		ieee80211_free_node(ni);
2179		return EIO;
2180	}
2181
2182	ifp->if_opackets++;
2183
2184	if (params == NULL) {
2185		/*
2186		 * Legacy path; interpret frame contents to decide
2187		 * precisely how to send the frame.
2188		 */
2189		if (rum_tx_mgt(sc, m, ni) != 0)
2190			goto bad;
2191	} else {
2192		/*
2193		 * Caller supplied explicit parameters to use in
2194		 * sending the frame.
2195		 */
2196		if (rum_tx_raw(sc, m, ni, params) != 0)
2197			goto bad;
2198	}
2199	RUM_UNLOCK(sc);
2200
2201	return 0;
2202bad:
2203	ifp->if_oerrors++;
2204	RUM_UNLOCK(sc);
2205	ieee80211_free_node(ni);
2206	return EIO;
2207}
2208
2209static void
2210rum_ratectl_start(struct rum_softc *sc, struct ieee80211_node *ni)
2211{
2212	struct ieee80211vap *vap = ni->ni_vap;
2213	struct rum_vap *rvp = RUM_VAP(vap);
2214
2215	/* clear statistic registers (STA_CSR0 to STA_CSR5) */
2216	rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
2217
2218	usb_callout_reset(&rvp->ratectl_ch, hz, rum_ratectl_timeout, rvp);
2219}
2220
2221static void
2222rum_ratectl_timeout(void *arg)
2223{
2224	struct rum_vap *rvp = arg;
2225	struct ieee80211vap *vap = &rvp->vap;
2226	struct ieee80211com *ic = vap->iv_ic;
2227
2228	ieee80211_runtask(ic, &rvp->ratectl_task);
2229}
2230
2231static void
2232rum_ratectl_task(void *arg, int pending)
2233{
2234	struct rum_vap *rvp = arg;
2235	struct ieee80211vap *vap = &rvp->vap;
2236	struct ieee80211com *ic = vap->iv_ic;
2237	struct ifnet *ifp = ic->ic_ifp;
2238	struct rum_softc *sc = ifp->if_softc;
2239	struct ieee80211_node *ni;
2240	int ok, fail;
2241	int sum, retrycnt;
2242
2243	RUM_LOCK(sc);
2244	/* read and clear statistic registers (STA_CSR0 to STA_CSR10) */
2245	rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof(sc->sta));
2246
2247	ok = (le32toh(sc->sta[4]) >> 16) +	/* TX ok w/o retry */
2248	    (le32toh(sc->sta[5]) & 0xffff);	/* TX ok w/ retry */
2249	fail = (le32toh(sc->sta[5]) >> 16);	/* TX retry-fail count */
2250	sum = ok+fail;
2251	retrycnt = (le32toh(sc->sta[5]) & 0xffff) + fail;
2252
2253	ni = ieee80211_ref_node(vap->iv_bss);
2254	ieee80211_ratectl_tx_update(vap, ni, &sum, &ok, &retrycnt);
2255	(void) ieee80211_ratectl_rate(ni, NULL, 0);
2256	ieee80211_free_node(ni);
2257
2258	ifp->if_oerrors += fail;	/* count TX retry-fail as Tx errors */
2259
2260	usb_callout_reset(&rvp->ratectl_ch, hz, rum_ratectl_timeout, rvp);
2261	RUM_UNLOCK(sc);
2262}
2263
2264static void
2265rum_scan_start(struct ieee80211com *ic)
2266{
2267	struct ifnet *ifp = ic->ic_ifp;
2268	struct rum_softc *sc = ifp->if_softc;
2269	uint32_t tmp;
2270
2271	RUM_LOCK(sc);
2272	/* abort TSF synchronization */
2273	tmp = rum_read(sc, RT2573_TXRX_CSR9);
2274	rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff);
2275	rum_set_bssid(sc, ifp->if_broadcastaddr);
2276	RUM_UNLOCK(sc);
2277
2278}
2279
2280static void
2281rum_scan_end(struct ieee80211com *ic)
2282{
2283	struct rum_softc *sc = ic->ic_ifp->if_softc;
2284
2285	RUM_LOCK(sc);
2286	rum_enable_tsf_sync(sc);
2287	rum_set_bssid(sc, sc->sc_bssid);
2288	RUM_UNLOCK(sc);
2289
2290}
2291
2292static void
2293rum_set_channel(struct ieee80211com *ic)
2294{
2295	struct rum_softc *sc = ic->ic_ifp->if_softc;
2296
2297	RUM_LOCK(sc);
2298	rum_set_chan(sc, ic->ic_curchan);
2299	RUM_UNLOCK(sc);
2300}
2301
2302static int
2303rum_get_rssi(struct rum_softc *sc, uint8_t raw)
2304{
2305	struct ifnet *ifp = sc->sc_ifp;
2306	struct ieee80211com *ic = ifp->if_l2com;
2307	int lna, agc, rssi;
2308
2309	lna = (raw >> 5) & 0x3;
2310	agc = raw & 0x1f;
2311
2312	if (lna == 0) {
2313		/*
2314		 * No RSSI mapping
2315		 *
2316		 * NB: Since RSSI is relative to noise floor, -1 is
2317		 *     adequate for caller to know error happened.
2318		 */
2319		return -1;
2320	}
2321
2322	rssi = (2 * agc) - RT2573_NOISE_FLOOR;
2323
2324	if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) {
2325		rssi += sc->rssi_2ghz_corr;
2326
2327		if (lna == 1)
2328			rssi -= 64;
2329		else if (lna == 2)
2330			rssi -= 74;
2331		else if (lna == 3)
2332			rssi -= 90;
2333	} else {
2334		rssi += sc->rssi_5ghz_corr;
2335
2336		if (!sc->ext_5ghz_lna && lna != 1)
2337			rssi += 4;
2338
2339		if (lna == 1)
2340			rssi -= 64;
2341		else if (lna == 2)
2342			rssi -= 86;
2343		else if (lna == 3)
2344			rssi -= 100;
2345	}
2346	return rssi;
2347}
2348
2349static int
2350rum_pause(struct rum_softc *sc, int timeout)
2351{
2352
2353	usb_pause_mtx(&sc->sc_mtx, timeout);
2354	return (0);
2355}
2356
2357static device_method_t rum_methods[] = {
2358	/* Device interface */
2359	DEVMETHOD(device_probe,		rum_match),
2360	DEVMETHOD(device_attach,	rum_attach),
2361	DEVMETHOD(device_detach,	rum_detach),
2362
2363	{ 0, 0 }
2364};
2365
2366static driver_t rum_driver = {
2367	.name = "rum",
2368	.methods = rum_methods,
2369	.size = sizeof(struct rum_softc),
2370};
2371
2372static devclass_t rum_devclass;
2373
2374DRIVER_MODULE(rum, uhub, rum_driver, rum_devclass, NULL, 0);
2375MODULE_DEPEND(rum, wlan, 1, 1, 1);
2376MODULE_DEPEND(rum, usb, 1, 1, 1);
2377MODULE_VERSION(rum, 1);
2378