if_rum.c revision 212127
1/*	$FreeBSD: head/sys/dev/usb/wlan/if_rum.c 212127 2010-09-02 03:28:03Z thompsa $	*/
2
3/*-
4 * Copyright (c) 2005-2007 Damien Bergamini <damien.bergamini@free.fr>
5 * Copyright (c) 2006 Niall O'Higgins <niallo@openbsd.org>
6 * Copyright (c) 2007-2008 Hans Petter Selasky <hselasky@FreeBSD.org>
7 *
8 * Permission to use, copy, modify, and distribute this software for any
9 * purpose with or without fee is hereby granted, provided that the above
10 * copyright notice and this permission notice appear in all copies.
11 *
12 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
13 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
15 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
16 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
17 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
18 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19 */
20
21#include <sys/cdefs.h>
22__FBSDID("$FreeBSD: head/sys/dev/usb/wlan/if_rum.c 212127 2010-09-02 03:28:03Z thompsa $");
23
24/*-
25 * Ralink Technology RT2501USB/RT2601USB chipset driver
26 * http://www.ralinktech.com.tw/
27 */
28
29#include <sys/param.h>
30#include <sys/sockio.h>
31#include <sys/sysctl.h>
32#include <sys/lock.h>
33#include <sys/mutex.h>
34#include <sys/mbuf.h>
35#include <sys/kernel.h>
36#include <sys/socket.h>
37#include <sys/systm.h>
38#include <sys/malloc.h>
39#include <sys/module.h>
40#include <sys/bus.h>
41#include <sys/endian.h>
42#include <sys/kdb.h>
43
44#include <machine/bus.h>
45#include <machine/resource.h>
46#include <sys/rman.h>
47
48#include <net/bpf.h>
49#include <net/if.h>
50#include <net/if_arp.h>
51#include <net/ethernet.h>
52#include <net/if_dl.h>
53#include <net/if_media.h>
54#include <net/if_types.h>
55
56#ifdef INET
57#include <netinet/in.h>
58#include <netinet/in_systm.h>
59#include <netinet/in_var.h>
60#include <netinet/if_ether.h>
61#include <netinet/ip.h>
62#endif
63
64#include <net80211/ieee80211_var.h>
65#include <net80211/ieee80211_regdomain.h>
66#include <net80211/ieee80211_radiotap.h>
67#include <net80211/ieee80211_ratectl.h>
68
69#include <dev/usb/usb.h>
70#include <dev/usb/usbdi.h>
71#include "usbdevs.h"
72
73#define	USB_DEBUG_VAR rum_debug
74#include <dev/usb/usb_debug.h>
75
76#include <dev/usb/wlan/if_rumreg.h>
77#include <dev/usb/wlan/if_rumvar.h>
78#include <dev/usb/wlan/if_rumfw.h>
79
80#ifdef USB_DEBUG
81static int rum_debug = 0;
82
83SYSCTL_NODE(_hw_usb, OID_AUTO, rum, CTLFLAG_RW, 0, "USB rum");
84SYSCTL_INT(_hw_usb_rum, OID_AUTO, debug, CTLFLAG_RW, &rum_debug, 0,
85    "Debug level");
86#endif
87
88static const struct usb_device_id rum_devs[] = {
89#define	RUM_DEV(v,p)  { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
90    RUM_DEV(ABOCOM, HWU54DM),
91    RUM_DEV(ABOCOM, RT2573_2),
92    RUM_DEV(ABOCOM, RT2573_3),
93    RUM_DEV(ABOCOM, RT2573_4),
94    RUM_DEV(ABOCOM, WUG2700),
95    RUM_DEV(AMIT, CGWLUSB2GO),
96    RUM_DEV(ASUS, RT2573_1),
97    RUM_DEV(ASUS, RT2573_2),
98    RUM_DEV(BELKIN, F5D7050A),
99    RUM_DEV(BELKIN, F5D9050V3),
100    RUM_DEV(CISCOLINKSYS, WUSB54GC),
101    RUM_DEV(CISCOLINKSYS, WUSB54GR),
102    RUM_DEV(CONCEPTRONIC2, C54RU2),
103    RUM_DEV(COREGA, CGWLUSB2GL),
104    RUM_DEV(COREGA, CGWLUSB2GPX),
105    RUM_DEV(DICKSMITH, CWD854F),
106    RUM_DEV(DICKSMITH, RT2573),
107    RUM_DEV(EDIMAX, EW7318USG),
108    RUM_DEV(DLINK2, DWLG122C1),
109    RUM_DEV(DLINK2, WUA1340),
110    RUM_DEV(DLINK2, DWA111),
111    RUM_DEV(DLINK2, DWA110),
112    RUM_DEV(GIGABYTE, GNWB01GS),
113    RUM_DEV(GIGABYTE, GNWI05GS),
114    RUM_DEV(GIGASET, RT2573),
115    RUM_DEV(GOODWAY, RT2573),
116    RUM_DEV(GUILLEMOT, HWGUSB254LB),
117    RUM_DEV(GUILLEMOT, HWGUSB254V2AP),
118    RUM_DEV(HUAWEI3COM, WUB320G),
119    RUM_DEV(MELCO, G54HP),
120    RUM_DEV(MELCO, SG54HP),
121    RUM_DEV(MSI, RT2573_1),
122    RUM_DEV(MSI, RT2573_2),
123    RUM_DEV(MSI, RT2573_3),
124    RUM_DEV(MSI, RT2573_4),
125    RUM_DEV(NOVATECH, RT2573),
126    RUM_DEV(PLANEX2, GWUS54HP),
127    RUM_DEV(PLANEX2, GWUS54MINI2),
128    RUM_DEV(PLANEX2, GWUSMM),
129    RUM_DEV(QCOM, RT2573),
130    RUM_DEV(QCOM, RT2573_2),
131    RUM_DEV(QCOM, RT2573_3),
132    RUM_DEV(RALINK, RT2573),
133    RUM_DEV(RALINK, RT2573_2),
134    RUM_DEV(RALINK, RT2671),
135    RUM_DEV(SITECOMEU, WL113R2),
136    RUM_DEV(SITECOMEU, WL172),
137    RUM_DEV(SPARKLAN, RT2573),
138    RUM_DEV(SURECOM, RT2573),
139#undef RUM_DEV
140};
141
142static device_probe_t rum_match;
143static device_attach_t rum_attach;
144static device_detach_t rum_detach;
145
146static usb_callback_t rum_bulk_read_callback;
147static usb_callback_t rum_bulk_write_callback;
148
149static usb_error_t	rum_do_request(struct rum_softc *sc,
150			    struct usb_device_request *req, void *data);
151static struct ieee80211vap *rum_vap_create(struct ieee80211com *,
152			    const char name[IFNAMSIZ], int unit, int opmode,
153			    int flags, const uint8_t bssid[IEEE80211_ADDR_LEN],
154			    const uint8_t mac[IEEE80211_ADDR_LEN]);
155static void		rum_vap_delete(struct ieee80211vap *);
156static void		rum_tx_free(struct rum_tx_data *, int);
157static void		rum_setup_tx_list(struct rum_softc *);
158static void		rum_unsetup_tx_list(struct rum_softc *);
159static int		rum_newstate(struct ieee80211vap *,
160			    enum ieee80211_state, int);
161static void		rum_setup_tx_desc(struct rum_softc *,
162			    struct rum_tx_desc *, uint32_t, uint16_t, int,
163			    int);
164static int		rum_tx_mgt(struct rum_softc *, struct mbuf *,
165			    struct ieee80211_node *);
166static int		rum_tx_raw(struct rum_softc *, struct mbuf *,
167			    struct ieee80211_node *,
168			    const struct ieee80211_bpf_params *);
169static int		rum_tx_data(struct rum_softc *, struct mbuf *,
170			    struct ieee80211_node *);
171static void		rum_start(struct ifnet *);
172static int		rum_ioctl(struct ifnet *, u_long, caddr_t);
173static void		rum_eeprom_read(struct rum_softc *, uint16_t, void *,
174			    int);
175static uint32_t		rum_read(struct rum_softc *, uint16_t);
176static void		rum_read_multi(struct rum_softc *, uint16_t, void *,
177			    int);
178static usb_error_t	rum_write(struct rum_softc *, uint16_t, uint32_t);
179static usb_error_t	rum_write_multi(struct rum_softc *, uint16_t, void *,
180			    size_t);
181static void		rum_bbp_write(struct rum_softc *, uint8_t, uint8_t);
182static uint8_t		rum_bbp_read(struct rum_softc *, uint8_t);
183static void		rum_rf_write(struct rum_softc *, uint8_t, uint32_t);
184static void		rum_select_antenna(struct rum_softc *);
185static void		rum_enable_mrr(struct rum_softc *);
186static void		rum_set_txpreamble(struct rum_softc *);
187static void		rum_set_basicrates(struct rum_softc *);
188static void		rum_select_band(struct rum_softc *,
189			    struct ieee80211_channel *);
190static void		rum_set_chan(struct rum_softc *,
191			    struct ieee80211_channel *);
192static void		rum_enable_tsf_sync(struct rum_softc *);
193static void		rum_enable_tsf(struct rum_softc *);
194static void		rum_update_slot(struct ifnet *);
195static void		rum_set_bssid(struct rum_softc *, const uint8_t *);
196static void		rum_set_macaddr(struct rum_softc *, const uint8_t *);
197static void		rum_update_mcast(struct ifnet *);
198static void		rum_update_promisc(struct ifnet *);
199static void		rum_setpromisc(struct rum_softc *);
200static const char	*rum_get_rf(int);
201static void		rum_read_eeprom(struct rum_softc *);
202static int		rum_bbp_init(struct rum_softc *);
203static void		rum_init_locked(struct rum_softc *);
204static void		rum_init(void *);
205static void		rum_stop(struct rum_softc *);
206static void		rum_load_microcode(struct rum_softc *, const uint8_t *,
207			    size_t);
208static int		rum_prepare_beacon(struct rum_softc *,
209			    struct ieee80211vap *);
210static int		rum_raw_xmit(struct ieee80211_node *, struct mbuf *,
211			    const struct ieee80211_bpf_params *);
212static void		rum_scan_start(struct ieee80211com *);
213static void		rum_scan_end(struct ieee80211com *);
214static void		rum_set_channel(struct ieee80211com *);
215static int		rum_get_rssi(struct rum_softc *, uint8_t);
216static void		rum_ratectl_start(struct rum_softc *,
217			    struct ieee80211_node *);
218static void		rum_ratectl_timeout(void *);
219static void		rum_ratectl_task(void *, int);
220static int		rum_pause(struct rum_softc *, int);
221
222static const struct {
223	uint32_t	reg;
224	uint32_t	val;
225} rum_def_mac[] = {
226	{ RT2573_TXRX_CSR0,  0x025fb032 },
227	{ RT2573_TXRX_CSR1,  0x9eaa9eaf },
228	{ RT2573_TXRX_CSR2,  0x8a8b8c8d },
229	{ RT2573_TXRX_CSR3,  0x00858687 },
230	{ RT2573_TXRX_CSR7,  0x2e31353b },
231	{ RT2573_TXRX_CSR8,  0x2a2a2a2c },
232	{ RT2573_TXRX_CSR15, 0x0000000f },
233	{ RT2573_MAC_CSR6,   0x00000fff },
234	{ RT2573_MAC_CSR8,   0x016c030a },
235	{ RT2573_MAC_CSR10,  0x00000718 },
236	{ RT2573_MAC_CSR12,  0x00000004 },
237	{ RT2573_MAC_CSR13,  0x00007f00 },
238	{ RT2573_SEC_CSR0,   0x00000000 },
239	{ RT2573_SEC_CSR1,   0x00000000 },
240	{ RT2573_SEC_CSR5,   0x00000000 },
241	{ RT2573_PHY_CSR1,   0x000023b0 },
242	{ RT2573_PHY_CSR5,   0x00040a06 },
243	{ RT2573_PHY_CSR6,   0x00080606 },
244	{ RT2573_PHY_CSR7,   0x00000408 },
245	{ RT2573_AIFSN_CSR,  0x00002273 },
246	{ RT2573_CWMIN_CSR,  0x00002344 },
247	{ RT2573_CWMAX_CSR,  0x000034aa }
248};
249
250static const struct {
251	uint8_t	reg;
252	uint8_t	val;
253} rum_def_bbp[] = {
254	{   3, 0x80 },
255	{  15, 0x30 },
256	{  17, 0x20 },
257	{  21, 0xc8 },
258	{  22, 0x38 },
259	{  23, 0x06 },
260	{  24, 0xfe },
261	{  25, 0x0a },
262	{  26, 0x0d },
263	{  32, 0x0b },
264	{  34, 0x12 },
265	{  37, 0x07 },
266	{  39, 0xf8 },
267	{  41, 0x60 },
268	{  53, 0x10 },
269	{  54, 0x18 },
270	{  60, 0x10 },
271	{  61, 0x04 },
272	{  62, 0x04 },
273	{  75, 0xfe },
274	{  86, 0xfe },
275	{  88, 0xfe },
276	{  90, 0x0f },
277	{  99, 0x00 },
278	{ 102, 0x16 },
279	{ 107, 0x04 }
280};
281
282static const struct rfprog {
283	uint8_t		chan;
284	uint32_t	r1, r2, r3, r4;
285}  rum_rf5226[] = {
286	{   1, 0x00b03, 0x001e1, 0x1a014, 0x30282 },
287	{   2, 0x00b03, 0x001e1, 0x1a014, 0x30287 },
288	{   3, 0x00b03, 0x001e2, 0x1a014, 0x30282 },
289	{   4, 0x00b03, 0x001e2, 0x1a014, 0x30287 },
290	{   5, 0x00b03, 0x001e3, 0x1a014, 0x30282 },
291	{   6, 0x00b03, 0x001e3, 0x1a014, 0x30287 },
292	{   7, 0x00b03, 0x001e4, 0x1a014, 0x30282 },
293	{   8, 0x00b03, 0x001e4, 0x1a014, 0x30287 },
294	{   9, 0x00b03, 0x001e5, 0x1a014, 0x30282 },
295	{  10, 0x00b03, 0x001e5, 0x1a014, 0x30287 },
296	{  11, 0x00b03, 0x001e6, 0x1a014, 0x30282 },
297	{  12, 0x00b03, 0x001e6, 0x1a014, 0x30287 },
298	{  13, 0x00b03, 0x001e7, 0x1a014, 0x30282 },
299	{  14, 0x00b03, 0x001e8, 0x1a014, 0x30284 },
300
301	{  34, 0x00b03, 0x20266, 0x36014, 0x30282 },
302	{  38, 0x00b03, 0x20267, 0x36014, 0x30284 },
303	{  42, 0x00b03, 0x20268, 0x36014, 0x30286 },
304	{  46, 0x00b03, 0x20269, 0x36014, 0x30288 },
305
306	{  36, 0x00b03, 0x00266, 0x26014, 0x30288 },
307	{  40, 0x00b03, 0x00268, 0x26014, 0x30280 },
308	{  44, 0x00b03, 0x00269, 0x26014, 0x30282 },
309	{  48, 0x00b03, 0x0026a, 0x26014, 0x30284 },
310	{  52, 0x00b03, 0x0026b, 0x26014, 0x30286 },
311	{  56, 0x00b03, 0x0026c, 0x26014, 0x30288 },
312	{  60, 0x00b03, 0x0026e, 0x26014, 0x30280 },
313	{  64, 0x00b03, 0x0026f, 0x26014, 0x30282 },
314
315	{ 100, 0x00b03, 0x0028a, 0x2e014, 0x30280 },
316	{ 104, 0x00b03, 0x0028b, 0x2e014, 0x30282 },
317	{ 108, 0x00b03, 0x0028c, 0x2e014, 0x30284 },
318	{ 112, 0x00b03, 0x0028d, 0x2e014, 0x30286 },
319	{ 116, 0x00b03, 0x0028e, 0x2e014, 0x30288 },
320	{ 120, 0x00b03, 0x002a0, 0x2e014, 0x30280 },
321	{ 124, 0x00b03, 0x002a1, 0x2e014, 0x30282 },
322	{ 128, 0x00b03, 0x002a2, 0x2e014, 0x30284 },
323	{ 132, 0x00b03, 0x002a3, 0x2e014, 0x30286 },
324	{ 136, 0x00b03, 0x002a4, 0x2e014, 0x30288 },
325	{ 140, 0x00b03, 0x002a6, 0x2e014, 0x30280 },
326
327	{ 149, 0x00b03, 0x002a8, 0x2e014, 0x30287 },
328	{ 153, 0x00b03, 0x002a9, 0x2e014, 0x30289 },
329	{ 157, 0x00b03, 0x002ab, 0x2e014, 0x30281 },
330	{ 161, 0x00b03, 0x002ac, 0x2e014, 0x30283 },
331	{ 165, 0x00b03, 0x002ad, 0x2e014, 0x30285 }
332}, rum_rf5225[] = {
333	{   1, 0x00b33, 0x011e1, 0x1a014, 0x30282 },
334	{   2, 0x00b33, 0x011e1, 0x1a014, 0x30287 },
335	{   3, 0x00b33, 0x011e2, 0x1a014, 0x30282 },
336	{   4, 0x00b33, 0x011e2, 0x1a014, 0x30287 },
337	{   5, 0x00b33, 0x011e3, 0x1a014, 0x30282 },
338	{   6, 0x00b33, 0x011e3, 0x1a014, 0x30287 },
339	{   7, 0x00b33, 0x011e4, 0x1a014, 0x30282 },
340	{   8, 0x00b33, 0x011e4, 0x1a014, 0x30287 },
341	{   9, 0x00b33, 0x011e5, 0x1a014, 0x30282 },
342	{  10, 0x00b33, 0x011e5, 0x1a014, 0x30287 },
343	{  11, 0x00b33, 0x011e6, 0x1a014, 0x30282 },
344	{  12, 0x00b33, 0x011e6, 0x1a014, 0x30287 },
345	{  13, 0x00b33, 0x011e7, 0x1a014, 0x30282 },
346	{  14, 0x00b33, 0x011e8, 0x1a014, 0x30284 },
347
348	{  34, 0x00b33, 0x01266, 0x26014, 0x30282 },
349	{  38, 0x00b33, 0x01267, 0x26014, 0x30284 },
350	{  42, 0x00b33, 0x01268, 0x26014, 0x30286 },
351	{  46, 0x00b33, 0x01269, 0x26014, 0x30288 },
352
353	{  36, 0x00b33, 0x01266, 0x26014, 0x30288 },
354	{  40, 0x00b33, 0x01268, 0x26014, 0x30280 },
355	{  44, 0x00b33, 0x01269, 0x26014, 0x30282 },
356	{  48, 0x00b33, 0x0126a, 0x26014, 0x30284 },
357	{  52, 0x00b33, 0x0126b, 0x26014, 0x30286 },
358	{  56, 0x00b33, 0x0126c, 0x26014, 0x30288 },
359	{  60, 0x00b33, 0x0126e, 0x26014, 0x30280 },
360	{  64, 0x00b33, 0x0126f, 0x26014, 0x30282 },
361
362	{ 100, 0x00b33, 0x0128a, 0x2e014, 0x30280 },
363	{ 104, 0x00b33, 0x0128b, 0x2e014, 0x30282 },
364	{ 108, 0x00b33, 0x0128c, 0x2e014, 0x30284 },
365	{ 112, 0x00b33, 0x0128d, 0x2e014, 0x30286 },
366	{ 116, 0x00b33, 0x0128e, 0x2e014, 0x30288 },
367	{ 120, 0x00b33, 0x012a0, 0x2e014, 0x30280 },
368	{ 124, 0x00b33, 0x012a1, 0x2e014, 0x30282 },
369	{ 128, 0x00b33, 0x012a2, 0x2e014, 0x30284 },
370	{ 132, 0x00b33, 0x012a3, 0x2e014, 0x30286 },
371	{ 136, 0x00b33, 0x012a4, 0x2e014, 0x30288 },
372	{ 140, 0x00b33, 0x012a6, 0x2e014, 0x30280 },
373
374	{ 149, 0x00b33, 0x012a8, 0x2e014, 0x30287 },
375	{ 153, 0x00b33, 0x012a9, 0x2e014, 0x30289 },
376	{ 157, 0x00b33, 0x012ab, 0x2e014, 0x30281 },
377	{ 161, 0x00b33, 0x012ac, 0x2e014, 0x30283 },
378	{ 165, 0x00b33, 0x012ad, 0x2e014, 0x30285 }
379};
380
381static const struct usb_config rum_config[RUM_N_TRANSFER] = {
382	[RUM_BULK_WR] = {
383		.type = UE_BULK,
384		.endpoint = UE_ADDR_ANY,
385		.direction = UE_DIR_OUT,
386		.bufsize = (MCLBYTES + RT2573_TX_DESC_SIZE + 8),
387		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
388		.callback = rum_bulk_write_callback,
389		.timeout = 5000,	/* ms */
390	},
391	[RUM_BULK_RD] = {
392		.type = UE_BULK,
393		.endpoint = UE_ADDR_ANY,
394		.direction = UE_DIR_IN,
395		.bufsize = (MCLBYTES + RT2573_RX_DESC_SIZE),
396		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
397		.callback = rum_bulk_read_callback,
398	},
399};
400
401static int
402rum_match(device_t self)
403{
404	struct usb_attach_arg *uaa = device_get_ivars(self);
405
406	if (uaa->usb_mode != USB_MODE_HOST)
407		return (ENXIO);
408	if (uaa->info.bConfigIndex != 0)
409		return (ENXIO);
410	if (uaa->info.bIfaceIndex != RT2573_IFACE_INDEX)
411		return (ENXIO);
412
413	return (usbd_lookup_id_by_uaa(rum_devs, sizeof(rum_devs), uaa));
414}
415
416static int
417rum_attach(device_t self)
418{
419	struct usb_attach_arg *uaa = device_get_ivars(self);
420	struct rum_softc *sc = device_get_softc(self);
421	struct ieee80211com *ic;
422	struct ifnet *ifp;
423	uint8_t iface_index, bands;
424	uint32_t tmp;
425	int error, ntries;
426
427	device_set_usb_desc(self);
428	sc->sc_udev = uaa->device;
429	sc->sc_dev = self;
430
431	mtx_init(&sc->sc_mtx, device_get_nameunit(self),
432	    MTX_NETWORK_LOCK, MTX_DEF);
433
434	iface_index = RT2573_IFACE_INDEX;
435	error = usbd_transfer_setup(uaa->device, &iface_index,
436	    sc->sc_xfer, rum_config, RUM_N_TRANSFER, sc, &sc->sc_mtx);
437	if (error) {
438		device_printf(self, "could not allocate USB transfers, "
439		    "err=%s\n", usbd_errstr(error));
440		goto detach;
441	}
442
443	RUM_LOCK(sc);
444	/* retrieve RT2573 rev. no */
445	for (ntries = 0; ntries < 100; ntries++) {
446		if ((tmp = rum_read(sc, RT2573_MAC_CSR0)) != 0)
447			break;
448		if (rum_pause(sc, hz / 100))
449			break;
450	}
451	if (ntries == 100) {
452		device_printf(sc->sc_dev, "timeout waiting for chip to settle\n");
453		RUM_UNLOCK(sc);
454		goto detach;
455	}
456
457	/* retrieve MAC address and various other things from EEPROM */
458	rum_read_eeprom(sc);
459
460	device_printf(sc->sc_dev, "MAC/BBP RT2573 (rev 0x%05x), RF %s\n",
461	    tmp, rum_get_rf(sc->rf_rev));
462
463	rum_load_microcode(sc, rt2573_ucode, sizeof(rt2573_ucode));
464	RUM_UNLOCK(sc);
465
466	ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
467	if (ifp == NULL) {
468		device_printf(sc->sc_dev, "can not if_alloc()\n");
469		goto detach;
470	}
471	ic = ifp->if_l2com;
472
473	ifp->if_softc = sc;
474	if_initname(ifp, "rum", device_get_unit(sc->sc_dev));
475	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
476	ifp->if_init = rum_init;
477	ifp->if_ioctl = rum_ioctl;
478	ifp->if_start = rum_start;
479	IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
480	ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
481	IFQ_SET_READY(&ifp->if_snd);
482
483	ic->ic_ifp = ifp;
484	ic->ic_phytype = IEEE80211_T_OFDM;	/* not only, but not used */
485
486	/* set device capabilities */
487	ic->ic_caps =
488	      IEEE80211_C_STA		/* station mode supported */
489	    | IEEE80211_C_IBSS		/* IBSS mode supported */
490	    | IEEE80211_C_MONITOR	/* monitor mode supported */
491	    | IEEE80211_C_HOSTAP	/* HostAp mode supported */
492	    | IEEE80211_C_TXPMGT	/* tx power management */
493	    | IEEE80211_C_SHPREAMBLE	/* short preamble supported */
494	    | IEEE80211_C_SHSLOT	/* short slot time supported */
495	    | IEEE80211_C_BGSCAN	/* bg scanning supported */
496	    | IEEE80211_C_WPA		/* 802.11i */
497	    | IEEE80211_C_RATECTL	/* use ratectl */
498	    ;
499
500	bands = 0;
501	setbit(&bands, IEEE80211_MODE_11B);
502	setbit(&bands, IEEE80211_MODE_11G);
503	if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_5226)
504		setbit(&bands, IEEE80211_MODE_11A);
505	ieee80211_init_channels(ic, NULL, &bands);
506
507	ieee80211_ifattach(ic, sc->sc_bssid);
508	ic->ic_update_promisc = rum_update_promisc;
509	ic->ic_raw_xmit = rum_raw_xmit;
510	ic->ic_scan_start = rum_scan_start;
511	ic->ic_scan_end = rum_scan_end;
512	ic->ic_set_channel = rum_set_channel;
513
514	ic->ic_vap_create = rum_vap_create;
515	ic->ic_vap_delete = rum_vap_delete;
516	ic->ic_update_mcast = rum_update_mcast;
517
518	ieee80211_radiotap_attach(ic,
519	    &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
520		RT2573_TX_RADIOTAP_PRESENT,
521	    &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
522		RT2573_RX_RADIOTAP_PRESENT);
523
524	if (bootverbose)
525		ieee80211_announce(ic);
526
527	return (0);
528
529detach:
530	rum_detach(self);
531	return (ENXIO);			/* failure */
532}
533
534static int
535rum_detach(device_t self)
536{
537	struct rum_softc *sc = device_get_softc(self);
538	struct ifnet *ifp = sc->sc_ifp;
539	struct ieee80211com *ic;
540
541	/* stop all USB transfers */
542	usbd_transfer_unsetup(sc->sc_xfer, RUM_N_TRANSFER);
543
544	/* free TX list, if any */
545	RUM_LOCK(sc);
546	rum_unsetup_tx_list(sc);
547	RUM_UNLOCK(sc);
548
549	if (ifp) {
550		ic = ifp->if_l2com;
551		ieee80211_ifdetach(ic);
552		if_free(ifp);
553	}
554	mtx_destroy(&sc->sc_mtx);
555
556	return (0);
557}
558
559static usb_error_t
560rum_do_request(struct rum_softc *sc,
561    struct usb_device_request *req, void *data)
562{
563	usb_error_t err;
564	int ntries = 10;
565
566	while (ntries--) {
567		err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx,
568		    req, data, 0, NULL, 250 /* ms */);
569		if (err == 0)
570			break;
571
572		DPRINTFN(1, "Control request failed, %s (retrying)\n",
573		    usbd_errstr(err));
574		if (rum_pause(sc, hz / 100))
575			break;
576	}
577	return (err);
578}
579
580static struct ieee80211vap *
581rum_vap_create(struct ieee80211com *ic,
582	const char name[IFNAMSIZ], int unit, int opmode, int flags,
583	const uint8_t bssid[IEEE80211_ADDR_LEN],
584	const uint8_t mac[IEEE80211_ADDR_LEN])
585{
586	struct rum_softc *sc = ic->ic_ifp->if_softc;
587	struct rum_vap *rvp;
588	struct ieee80211vap *vap;
589
590	if (!TAILQ_EMPTY(&ic->ic_vaps))		/* only one at a time */
591		return NULL;
592	rvp = (struct rum_vap *) malloc(sizeof(struct rum_vap),
593	    M_80211_VAP, M_NOWAIT | M_ZERO);
594	if (rvp == NULL)
595		return NULL;
596	vap = &rvp->vap;
597	/* enable s/w bmiss handling for sta mode */
598	ieee80211_vap_setup(ic, vap, name, unit, opmode,
599	    flags | IEEE80211_CLONE_NOBEACONS, bssid, mac);
600
601	/* override state transition machine */
602	rvp->newstate = vap->iv_newstate;
603	vap->iv_newstate = rum_newstate;
604
605	usb_callout_init_mtx(&rvp->ratectl_ch, &sc->sc_mtx, 0);
606	TASK_INIT(&rvp->ratectl_task, 0, rum_ratectl_task, rvp);
607	ieee80211_ratectl_init(vap);
608	ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */);
609	/* complete setup */
610	ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status);
611	ic->ic_opmode = opmode;
612	return vap;
613}
614
615static void
616rum_vap_delete(struct ieee80211vap *vap)
617{
618	struct rum_vap *rvp = RUM_VAP(vap);
619	struct ieee80211com *ic = vap->iv_ic;
620
621	usb_callout_drain(&rvp->ratectl_ch);
622	ieee80211_draintask(ic, &rvp->ratectl_task);
623	ieee80211_ratectl_deinit(vap);
624	ieee80211_vap_detach(vap);
625	free(rvp, M_80211_VAP);
626}
627
628static void
629rum_tx_free(struct rum_tx_data *data, int txerr)
630{
631	struct rum_softc *sc = data->sc;
632
633	if (data->m != NULL) {
634		if (data->m->m_flags & M_TXCB)
635			ieee80211_process_callback(data->ni, data->m,
636			    txerr ? ETIMEDOUT : 0);
637		m_freem(data->m);
638		data->m = NULL;
639
640		ieee80211_free_node(data->ni);
641		data->ni = NULL;
642	}
643	STAILQ_INSERT_TAIL(&sc->tx_free, data, next);
644	sc->tx_nfree++;
645}
646
647static void
648rum_setup_tx_list(struct rum_softc *sc)
649{
650	struct rum_tx_data *data;
651	int i;
652
653	sc->tx_nfree = 0;
654	STAILQ_INIT(&sc->tx_q);
655	STAILQ_INIT(&sc->tx_free);
656
657	for (i = 0; i < RUM_TX_LIST_COUNT; i++) {
658		data = &sc->tx_data[i];
659
660		data->sc = sc;
661		STAILQ_INSERT_TAIL(&sc->tx_free, data, next);
662		sc->tx_nfree++;
663	}
664}
665
666static void
667rum_unsetup_tx_list(struct rum_softc *sc)
668{
669	struct rum_tx_data *data;
670	int i;
671
672	/* make sure any subsequent use of the queues will fail */
673	sc->tx_nfree = 0;
674	STAILQ_INIT(&sc->tx_q);
675	STAILQ_INIT(&sc->tx_free);
676
677	/* free up all node references and mbufs */
678	for (i = 0; i < RUM_TX_LIST_COUNT; i++) {
679		data = &sc->tx_data[i];
680
681		if (data->m != NULL) {
682			m_freem(data->m);
683			data->m = NULL;
684		}
685		if (data->ni != NULL) {
686			ieee80211_free_node(data->ni);
687			data->ni = NULL;
688		}
689	}
690}
691
692static int
693rum_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
694{
695	struct rum_vap *rvp = RUM_VAP(vap);
696	struct ieee80211com *ic = vap->iv_ic;
697	struct rum_softc *sc = ic->ic_ifp->if_softc;
698	const struct ieee80211_txparam *tp;
699	enum ieee80211_state ostate;
700	struct ieee80211_node *ni;
701	uint32_t tmp;
702
703	ostate = vap->iv_state;
704	DPRINTF("%s -> %s\n",
705		ieee80211_state_name[ostate],
706		ieee80211_state_name[nstate]);
707
708	IEEE80211_UNLOCK(ic);
709	RUM_LOCK(sc);
710	usb_callout_stop(&rvp->ratectl_ch);
711
712	switch (nstate) {
713	case IEEE80211_S_INIT:
714		if (ostate == IEEE80211_S_RUN) {
715			/* abort TSF synchronization */
716			tmp = rum_read(sc, RT2573_TXRX_CSR9);
717			rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff);
718		}
719		break;
720
721	case IEEE80211_S_RUN:
722		ni = ieee80211_ref_node(vap->iv_bss);
723
724		if (vap->iv_opmode != IEEE80211_M_MONITOR) {
725			rum_update_slot(ic->ic_ifp);
726			rum_enable_mrr(sc);
727			rum_set_txpreamble(sc);
728			rum_set_basicrates(sc);
729			IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid);
730			rum_set_bssid(sc, sc->sc_bssid);
731		}
732
733		if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
734		    vap->iv_opmode == IEEE80211_M_IBSS)
735			rum_prepare_beacon(sc, vap);
736
737		if (vap->iv_opmode != IEEE80211_M_MONITOR)
738			rum_enable_tsf_sync(sc);
739		else
740			rum_enable_tsf(sc);
741
742		/* enable automatic rate adaptation */
743		tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
744		if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
745			rum_ratectl_start(sc, ni);
746		ieee80211_free_node(ni);
747		break;
748	default:
749		break;
750	}
751	RUM_UNLOCK(sc);
752	IEEE80211_LOCK(ic);
753	return (rvp->newstate(vap, nstate, arg));
754}
755
756static void
757rum_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
758{
759	struct rum_softc *sc = usbd_xfer_softc(xfer);
760	struct ifnet *ifp = sc->sc_ifp;
761	struct ieee80211vap *vap;
762	struct rum_tx_data *data;
763	struct mbuf *m;
764	struct usb_page_cache *pc;
765	unsigned int len;
766	int actlen, sumlen;
767
768	usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
769
770	switch (USB_GET_STATE(xfer)) {
771	case USB_ST_TRANSFERRED:
772		DPRINTFN(11, "transfer complete, %d bytes\n", actlen);
773
774		/* free resources */
775		data = usbd_xfer_get_priv(xfer);
776		rum_tx_free(data, 0);
777		usbd_xfer_set_priv(xfer, NULL);
778
779		ifp->if_opackets++;
780		ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
781
782		/* FALLTHROUGH */
783	case USB_ST_SETUP:
784tr_setup:
785		data = STAILQ_FIRST(&sc->tx_q);
786		if (data) {
787			STAILQ_REMOVE_HEAD(&sc->tx_q, next);
788			m = data->m;
789
790			if (m->m_pkthdr.len > (MCLBYTES + RT2573_TX_DESC_SIZE)) {
791				DPRINTFN(0, "data overflow, %u bytes\n",
792				    m->m_pkthdr.len);
793				m->m_pkthdr.len = (MCLBYTES + RT2573_TX_DESC_SIZE);
794			}
795			pc = usbd_xfer_get_frame(xfer, 0);
796			usbd_copy_in(pc, 0, &data->desc, RT2573_TX_DESC_SIZE);
797			usbd_m_copy_in(pc, RT2573_TX_DESC_SIZE, m, 0,
798			    m->m_pkthdr.len);
799
800			vap = data->ni->ni_vap;
801			if (ieee80211_radiotap_active_vap(vap)) {
802				struct rum_tx_radiotap_header *tap = &sc->sc_txtap;
803
804				tap->wt_flags = 0;
805				tap->wt_rate = data->rate;
806				tap->wt_antenna = sc->tx_ant;
807
808				ieee80211_radiotap_tx(vap, m);
809			}
810
811			/* align end on a 4-bytes boundary */
812			len = (RT2573_TX_DESC_SIZE + m->m_pkthdr.len + 3) & ~3;
813			if ((len % 64) == 0)
814				len += 4;
815
816			DPRINTFN(11, "sending frame len=%u xferlen=%u\n",
817			    m->m_pkthdr.len, len);
818
819			usbd_xfer_set_frame_len(xfer, 0, len);
820			usbd_xfer_set_priv(xfer, data);
821
822			usbd_transfer_submit(xfer);
823		}
824		RUM_UNLOCK(sc);
825		rum_start(ifp);
826		RUM_LOCK(sc);
827		break;
828
829	default:			/* Error */
830		DPRINTFN(11, "transfer error, %s\n",
831		    usbd_errstr(error));
832
833		ifp->if_oerrors++;
834		data = usbd_xfer_get_priv(xfer);
835		if (data != NULL) {
836			rum_tx_free(data, error);
837			usbd_xfer_set_priv(xfer, NULL);
838		}
839
840		if (error != USB_ERR_CANCELLED) {
841			if (error == USB_ERR_TIMEOUT)
842				device_printf(sc->sc_dev, "device timeout\n");
843
844			/*
845			 * Try to clear stall first, also if other
846			 * errors occur, hence clearing stall
847			 * introduces a 50 ms delay:
848			 */
849			usbd_xfer_set_stall(xfer);
850			goto tr_setup;
851		}
852		break;
853	}
854}
855
856static void
857rum_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
858{
859	struct rum_softc *sc = usbd_xfer_softc(xfer);
860	struct ifnet *ifp = sc->sc_ifp;
861	struct ieee80211com *ic = ifp->if_l2com;
862	struct ieee80211_node *ni;
863	struct mbuf *m = NULL;
864	struct usb_page_cache *pc;
865	uint32_t flags;
866	uint8_t rssi = 0;
867	int len;
868
869	usbd_xfer_status(xfer, &len, NULL, NULL, NULL);
870
871	switch (USB_GET_STATE(xfer)) {
872	case USB_ST_TRANSFERRED:
873
874		DPRINTFN(15, "rx done, actlen=%d\n", len);
875
876		if (len < RT2573_RX_DESC_SIZE + IEEE80211_MIN_LEN) {
877			DPRINTF("%s: xfer too short %d\n",
878			    device_get_nameunit(sc->sc_dev), len);
879			ifp->if_ierrors++;
880			goto tr_setup;
881		}
882
883		len -= RT2573_RX_DESC_SIZE;
884		pc = usbd_xfer_get_frame(xfer, 0);
885		usbd_copy_out(pc, 0, &sc->sc_rx_desc, RT2573_RX_DESC_SIZE);
886
887		rssi = rum_get_rssi(sc, sc->sc_rx_desc.rssi);
888		flags = le32toh(sc->sc_rx_desc.flags);
889		if (flags & RT2573_RX_CRC_ERROR) {
890			/*
891		         * This should not happen since we did not
892		         * request to receive those frames when we
893		         * filled RUM_TXRX_CSR2:
894		         */
895			DPRINTFN(5, "PHY or CRC error\n");
896			ifp->if_ierrors++;
897			goto tr_setup;
898		}
899
900		m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
901		if (m == NULL) {
902			DPRINTF("could not allocate mbuf\n");
903			ifp->if_ierrors++;
904			goto tr_setup;
905		}
906		usbd_copy_out(pc, RT2573_RX_DESC_SIZE,
907		    mtod(m, uint8_t *), len);
908
909		/* finalize mbuf */
910		m->m_pkthdr.rcvif = ifp;
911		m->m_pkthdr.len = m->m_len = (flags >> 16) & 0xfff;
912
913		if (ieee80211_radiotap_active(ic)) {
914			struct rum_rx_radiotap_header *tap = &sc->sc_rxtap;
915
916			/* XXX read tsf */
917			tap->wr_flags = 0;
918			tap->wr_rate = ieee80211_plcp2rate(sc->sc_rx_desc.rate,
919			    (flags & RT2573_RX_OFDM) ?
920			    IEEE80211_T_OFDM : IEEE80211_T_CCK);
921			tap->wr_antsignal = RT2573_NOISE_FLOOR + rssi;
922			tap->wr_antnoise = RT2573_NOISE_FLOOR;
923			tap->wr_antenna = sc->rx_ant;
924		}
925		/* FALLTHROUGH */
926	case USB_ST_SETUP:
927tr_setup:
928		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
929		usbd_transfer_submit(xfer);
930
931		/*
932		 * At the end of a USB callback it is always safe to unlock
933		 * the private mutex of a device! That is why we do the
934		 * "ieee80211_input" here, and not some lines up!
935		 */
936		RUM_UNLOCK(sc);
937		if (m) {
938			ni = ieee80211_find_rxnode(ic,
939			    mtod(m, struct ieee80211_frame_min *));
940			if (ni != NULL) {
941				(void) ieee80211_input(ni, m, rssi,
942				    RT2573_NOISE_FLOOR);
943				ieee80211_free_node(ni);
944			} else
945				(void) ieee80211_input_all(ic, m, rssi,
946				    RT2573_NOISE_FLOOR);
947		}
948		if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0 &&
949		    !IFQ_IS_EMPTY(&ifp->if_snd))
950			rum_start(ifp);
951		RUM_LOCK(sc);
952		return;
953
954	default:			/* Error */
955		if (error != USB_ERR_CANCELLED) {
956			/* try to clear stall first */
957			usbd_xfer_set_stall(xfer);
958			goto tr_setup;
959		}
960		return;
961	}
962}
963
964static uint8_t
965rum_plcp_signal(int rate)
966{
967	switch (rate) {
968	/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
969	case 12:	return 0xb;
970	case 18:	return 0xf;
971	case 24:	return 0xa;
972	case 36:	return 0xe;
973	case 48:	return 0x9;
974	case 72:	return 0xd;
975	case 96:	return 0x8;
976	case 108:	return 0xc;
977
978	/* CCK rates (NB: not IEEE std, device-specific) */
979	case 2:		return 0x0;
980	case 4:		return 0x1;
981	case 11:	return 0x2;
982	case 22:	return 0x3;
983	}
984	return 0xff;		/* XXX unsupported/unknown rate */
985}
986
987static void
988rum_setup_tx_desc(struct rum_softc *sc, struct rum_tx_desc *desc,
989    uint32_t flags, uint16_t xflags, int len, int rate)
990{
991	struct ifnet *ifp = sc->sc_ifp;
992	struct ieee80211com *ic = ifp->if_l2com;
993	uint16_t plcp_length;
994	int remainder;
995
996	desc->flags = htole32(flags);
997	desc->flags |= htole32(RT2573_TX_VALID);
998	desc->flags |= htole32(len << 16);
999
1000	desc->xflags = htole16(xflags);
1001
1002	desc->wme = htole16(RT2573_QID(0) | RT2573_AIFSN(2) |
1003	    RT2573_LOGCWMIN(4) | RT2573_LOGCWMAX(10));
1004
1005	/* setup PLCP fields */
1006	desc->plcp_signal  = rum_plcp_signal(rate);
1007	desc->plcp_service = 4;
1008
1009	len += IEEE80211_CRC_LEN;
1010	if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) {
1011		desc->flags |= htole32(RT2573_TX_OFDM);
1012
1013		plcp_length = len & 0xfff;
1014		desc->plcp_length_hi = plcp_length >> 6;
1015		desc->plcp_length_lo = plcp_length & 0x3f;
1016	} else {
1017		plcp_length = (16 * len + rate - 1) / rate;
1018		if (rate == 22) {
1019			remainder = (16 * len) % 22;
1020			if (remainder != 0 && remainder < 7)
1021				desc->plcp_service |= RT2573_PLCP_LENGEXT;
1022		}
1023		desc->plcp_length_hi = plcp_length >> 8;
1024		desc->plcp_length_lo = plcp_length & 0xff;
1025
1026		if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
1027			desc->plcp_signal |= 0x08;
1028	}
1029}
1030
1031static int
1032rum_sendprot(struct rum_softc *sc,
1033    const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate)
1034{
1035	struct ieee80211com *ic = ni->ni_ic;
1036	const struct ieee80211_frame *wh;
1037	struct rum_tx_data *data;
1038	struct mbuf *mprot;
1039	int protrate, ackrate, pktlen, flags, isshort;
1040	uint16_t dur;
1041
1042	RUM_LOCK_ASSERT(sc, MA_OWNED);
1043	KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY,
1044	    ("protection %d", prot));
1045
1046	wh = mtod(m, const struct ieee80211_frame *);
1047	pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN;
1048
1049	protrate = ieee80211_ctl_rate(ic->ic_rt, rate);
1050	ackrate = ieee80211_ack_rate(ic->ic_rt, rate);
1051
1052	isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0;
1053	dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort)
1054	    + ieee80211_ack_duration(ic->ic_rt, rate, isshort);
1055	flags = RT2573_TX_MORE_FRAG;
1056	if (prot == IEEE80211_PROT_RTSCTS) {
1057		/* NB: CTS is the same size as an ACK */
1058		dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort);
1059		flags |= RT2573_TX_NEED_ACK;
1060		mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur);
1061	} else {
1062		mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur);
1063	}
1064	if (mprot == NULL) {
1065		/* XXX stat + msg */
1066		return (ENOBUFS);
1067	}
1068	data = STAILQ_FIRST(&sc->tx_free);
1069	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1070	sc->tx_nfree--;
1071
1072	data->m = mprot;
1073	data->ni = ieee80211_ref_node(ni);
1074	data->rate = protrate;
1075	rum_setup_tx_desc(sc, &data->desc, flags, 0, mprot->m_pkthdr.len, protrate);
1076
1077	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1078	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1079
1080	return 0;
1081}
1082
1083static int
1084rum_tx_mgt(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
1085{
1086	struct ieee80211vap *vap = ni->ni_vap;
1087	struct ifnet *ifp = sc->sc_ifp;
1088	struct ieee80211com *ic = ifp->if_l2com;
1089	struct rum_tx_data *data;
1090	struct ieee80211_frame *wh;
1091	const struct ieee80211_txparam *tp;
1092	struct ieee80211_key *k;
1093	uint32_t flags = 0;
1094	uint16_t dur;
1095
1096	RUM_LOCK_ASSERT(sc, MA_OWNED);
1097
1098	data = STAILQ_FIRST(&sc->tx_free);
1099	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1100	sc->tx_nfree--;
1101
1102	wh = mtod(m0, struct ieee80211_frame *);
1103	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
1104		k = ieee80211_crypto_encap(ni, m0);
1105		if (k == NULL) {
1106			m_freem(m0);
1107			return ENOBUFS;
1108		}
1109		wh = mtod(m0, struct ieee80211_frame *);
1110	}
1111
1112	tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
1113
1114	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1115		flags |= RT2573_TX_NEED_ACK;
1116
1117		dur = ieee80211_ack_duration(ic->ic_rt, tp->mgmtrate,
1118		    ic->ic_flags & IEEE80211_F_SHPREAMBLE);
1119		*(uint16_t *)wh->i_dur = htole16(dur);
1120
1121		/* tell hardware to add timestamp for probe responses */
1122		if ((wh->i_fc[0] &
1123		    (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
1124		    (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
1125			flags |= RT2573_TX_TIMESTAMP;
1126	}
1127
1128	data->m = m0;
1129	data->ni = ni;
1130	data->rate = tp->mgmtrate;
1131
1132	rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, tp->mgmtrate);
1133
1134	DPRINTFN(10, "sending mgt frame len=%d rate=%d\n",
1135	    m0->m_pkthdr.len + (int)RT2573_TX_DESC_SIZE, tp->mgmtrate);
1136
1137	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1138	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1139
1140	return (0);
1141}
1142
1143static int
1144rum_tx_raw(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni,
1145    const struct ieee80211_bpf_params *params)
1146{
1147	struct ieee80211com *ic = ni->ni_ic;
1148	struct rum_tx_data *data;
1149	uint32_t flags;
1150	int rate, error;
1151
1152	RUM_LOCK_ASSERT(sc, MA_OWNED);
1153	KASSERT(params != NULL, ("no raw xmit params"));
1154
1155	rate = params->ibp_rate0;
1156	if (!ieee80211_isratevalid(ic->ic_rt, rate)) {
1157		m_freem(m0);
1158		return EINVAL;
1159	}
1160	flags = 0;
1161	if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0)
1162		flags |= RT2573_TX_NEED_ACK;
1163	if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) {
1164		error = rum_sendprot(sc, m0, ni,
1165		    params->ibp_flags & IEEE80211_BPF_RTS ?
1166			 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY,
1167		    rate);
1168		if (error || sc->tx_nfree == 0) {
1169			m_freem(m0);
1170			return ENOBUFS;
1171		}
1172		flags |= RT2573_TX_LONG_RETRY | RT2573_TX_IFS_SIFS;
1173	}
1174
1175	data = STAILQ_FIRST(&sc->tx_free);
1176	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1177	sc->tx_nfree--;
1178
1179	data->m = m0;
1180	data->ni = ni;
1181	data->rate = rate;
1182
1183	/* XXX need to setup descriptor ourself */
1184	rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, rate);
1185
1186	DPRINTFN(10, "sending raw frame len=%u rate=%u\n",
1187	    m0->m_pkthdr.len, rate);
1188
1189	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1190	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1191
1192	return 0;
1193}
1194
1195static int
1196rum_tx_data(struct rum_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
1197{
1198	struct ieee80211vap *vap = ni->ni_vap;
1199	struct ifnet *ifp = sc->sc_ifp;
1200	struct ieee80211com *ic = ifp->if_l2com;
1201	struct rum_tx_data *data;
1202	struct ieee80211_frame *wh;
1203	const struct ieee80211_txparam *tp;
1204	struct ieee80211_key *k;
1205	uint32_t flags = 0;
1206	uint16_t dur;
1207	int error, rate;
1208
1209	RUM_LOCK_ASSERT(sc, MA_OWNED);
1210
1211	wh = mtod(m0, struct ieee80211_frame *);
1212
1213	tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)];
1214	if (IEEE80211_IS_MULTICAST(wh->i_addr1))
1215		rate = tp->mcastrate;
1216	else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE)
1217		rate = tp->ucastrate;
1218	else
1219		rate = ni->ni_txrate;
1220
1221	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
1222		k = ieee80211_crypto_encap(ni, m0);
1223		if (k == NULL) {
1224			m_freem(m0);
1225			return ENOBUFS;
1226		}
1227
1228		/* packet header may have moved, reset our local pointer */
1229		wh = mtod(m0, struct ieee80211_frame *);
1230	}
1231
1232	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1233		int prot = IEEE80211_PROT_NONE;
1234		if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold)
1235			prot = IEEE80211_PROT_RTSCTS;
1236		else if ((ic->ic_flags & IEEE80211_F_USEPROT) &&
1237		    ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM)
1238			prot = ic->ic_protmode;
1239		if (prot != IEEE80211_PROT_NONE) {
1240			error = rum_sendprot(sc, m0, ni, prot, rate);
1241			if (error || sc->tx_nfree == 0) {
1242				m_freem(m0);
1243				return ENOBUFS;
1244			}
1245			flags |= RT2573_TX_LONG_RETRY | RT2573_TX_IFS_SIFS;
1246		}
1247	}
1248
1249	data = STAILQ_FIRST(&sc->tx_free);
1250	STAILQ_REMOVE_HEAD(&sc->tx_free, next);
1251	sc->tx_nfree--;
1252
1253	data->m = m0;
1254	data->ni = ni;
1255	data->rate = rate;
1256
1257	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
1258		flags |= RT2573_TX_NEED_ACK;
1259		flags |= RT2573_TX_MORE_FRAG;
1260
1261		dur = ieee80211_ack_duration(ic->ic_rt, rate,
1262		    ic->ic_flags & IEEE80211_F_SHPREAMBLE);
1263		*(uint16_t *)wh->i_dur = htole16(dur);
1264	}
1265
1266	rum_setup_tx_desc(sc, &data->desc, flags, 0, m0->m_pkthdr.len, rate);
1267
1268	DPRINTFN(10, "sending frame len=%d rate=%d\n",
1269	    m0->m_pkthdr.len + (int)RT2573_TX_DESC_SIZE, rate);
1270
1271	STAILQ_INSERT_TAIL(&sc->tx_q, data, next);
1272	usbd_transfer_start(sc->sc_xfer[RUM_BULK_WR]);
1273
1274	return 0;
1275}
1276
1277static void
1278rum_start(struct ifnet *ifp)
1279{
1280	struct rum_softc *sc = ifp->if_softc;
1281	struct ieee80211_node *ni;
1282	struct mbuf *m;
1283
1284	RUM_LOCK(sc);
1285	if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
1286		RUM_UNLOCK(sc);
1287		return;
1288	}
1289	for (;;) {
1290		IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
1291		if (m == NULL)
1292			break;
1293		if (sc->tx_nfree < RUM_TX_MINFREE) {
1294			IFQ_DRV_PREPEND(&ifp->if_snd, m);
1295			ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1296			break;
1297		}
1298		ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
1299		if (rum_tx_data(sc, m, ni) != 0) {
1300			ieee80211_free_node(ni);
1301			ifp->if_oerrors++;
1302			break;
1303		}
1304	}
1305	RUM_UNLOCK(sc);
1306}
1307
1308static int
1309rum_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
1310{
1311	struct rum_softc *sc = ifp->if_softc;
1312	struct ieee80211com *ic = ifp->if_l2com;
1313	struct ifreq *ifr = (struct ifreq *) data;
1314	int error = 0, startall = 0;
1315
1316	switch (cmd) {
1317	case SIOCSIFFLAGS:
1318		RUM_LOCK(sc);
1319		if (ifp->if_flags & IFF_UP) {
1320			if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
1321				rum_init_locked(sc);
1322				startall = 1;
1323			} else
1324				rum_setpromisc(sc);
1325		} else {
1326			if (ifp->if_drv_flags & IFF_DRV_RUNNING)
1327				rum_stop(sc);
1328		}
1329		RUM_UNLOCK(sc);
1330		if (startall)
1331			ieee80211_start_all(ic);
1332		break;
1333	case SIOCGIFMEDIA:
1334		error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
1335		break;
1336	case SIOCGIFADDR:
1337		error = ether_ioctl(ifp, cmd, data);
1338		break;
1339	default:
1340		error = EINVAL;
1341		break;
1342	}
1343	return error;
1344}
1345
1346static void
1347rum_eeprom_read(struct rum_softc *sc, uint16_t addr, void *buf, int len)
1348{
1349	struct usb_device_request req;
1350	usb_error_t error;
1351
1352	req.bmRequestType = UT_READ_VENDOR_DEVICE;
1353	req.bRequest = RT2573_READ_EEPROM;
1354	USETW(req.wValue, 0);
1355	USETW(req.wIndex, addr);
1356	USETW(req.wLength, len);
1357
1358	error = rum_do_request(sc, &req, buf);
1359	if (error != 0) {
1360		device_printf(sc->sc_dev, "could not read EEPROM: %s\n",
1361		    usbd_errstr(error));
1362	}
1363}
1364
1365static uint32_t
1366rum_read(struct rum_softc *sc, uint16_t reg)
1367{
1368	uint32_t val;
1369
1370	rum_read_multi(sc, reg, &val, sizeof val);
1371
1372	return le32toh(val);
1373}
1374
1375static void
1376rum_read_multi(struct rum_softc *sc, uint16_t reg, void *buf, int len)
1377{
1378	struct usb_device_request req;
1379	usb_error_t error;
1380
1381	req.bmRequestType = UT_READ_VENDOR_DEVICE;
1382	req.bRequest = RT2573_READ_MULTI_MAC;
1383	USETW(req.wValue, 0);
1384	USETW(req.wIndex, reg);
1385	USETW(req.wLength, len);
1386
1387	error = rum_do_request(sc, &req, buf);
1388	if (error != 0) {
1389		device_printf(sc->sc_dev,
1390		    "could not multi read MAC register: %s\n",
1391		    usbd_errstr(error));
1392	}
1393}
1394
1395static usb_error_t
1396rum_write(struct rum_softc *sc, uint16_t reg, uint32_t val)
1397{
1398	uint32_t tmp = htole32(val);
1399
1400	return (rum_write_multi(sc, reg, &tmp, sizeof tmp));
1401}
1402
1403static usb_error_t
1404rum_write_multi(struct rum_softc *sc, uint16_t reg, void *buf, size_t len)
1405{
1406	struct usb_device_request req;
1407	usb_error_t error;
1408
1409	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
1410	req.bRequest = RT2573_WRITE_MULTI_MAC;
1411	USETW(req.wValue, 0);
1412	USETW(req.wIndex, reg);
1413	USETW(req.wLength, len);
1414
1415	error = rum_do_request(sc, &req, buf);
1416	if (error != 0) {
1417		device_printf(sc->sc_dev,
1418		    "could not multi write MAC register: %s\n",
1419		    usbd_errstr(error));
1420	}
1421	return (error);
1422}
1423
1424static void
1425rum_bbp_write(struct rum_softc *sc, uint8_t reg, uint8_t val)
1426{
1427	uint32_t tmp;
1428	int ntries;
1429
1430	DPRINTFN(2, "reg=0x%08x\n", reg);
1431
1432	for (ntries = 0; ntries < 100; ntries++) {
1433		if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY))
1434			break;
1435		if (rum_pause(sc, hz / 100))
1436			break;
1437	}
1438	if (ntries == 100) {
1439		device_printf(sc->sc_dev, "could not write to BBP\n");
1440		return;
1441	}
1442
1443	tmp = RT2573_BBP_BUSY | (reg & 0x7f) << 8 | val;
1444	rum_write(sc, RT2573_PHY_CSR3, tmp);
1445}
1446
1447static uint8_t
1448rum_bbp_read(struct rum_softc *sc, uint8_t reg)
1449{
1450	uint32_t val;
1451	int ntries;
1452
1453	DPRINTFN(2, "reg=0x%08x\n", reg);
1454
1455	for (ntries = 0; ntries < 100; ntries++) {
1456		if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY))
1457			break;
1458		if (rum_pause(sc, hz / 100))
1459			break;
1460	}
1461	if (ntries == 100) {
1462		device_printf(sc->sc_dev, "could not read BBP\n");
1463		return 0;
1464	}
1465
1466	val = RT2573_BBP_BUSY | RT2573_BBP_READ | reg << 8;
1467	rum_write(sc, RT2573_PHY_CSR3, val);
1468
1469	for (ntries = 0; ntries < 100; ntries++) {
1470		val = rum_read(sc, RT2573_PHY_CSR3);
1471		if (!(val & RT2573_BBP_BUSY))
1472			return val & 0xff;
1473		if (rum_pause(sc, hz / 100))
1474			break;
1475	}
1476
1477	device_printf(sc->sc_dev, "could not read BBP\n");
1478	return 0;
1479}
1480
1481static void
1482rum_rf_write(struct rum_softc *sc, uint8_t reg, uint32_t val)
1483{
1484	uint32_t tmp;
1485	int ntries;
1486
1487	for (ntries = 0; ntries < 100; ntries++) {
1488		if (!(rum_read(sc, RT2573_PHY_CSR4) & RT2573_RF_BUSY))
1489			break;
1490		if (rum_pause(sc, hz / 100))
1491			break;
1492	}
1493	if (ntries == 100) {
1494		device_printf(sc->sc_dev, "could not write to RF\n");
1495		return;
1496	}
1497
1498	tmp = RT2573_RF_BUSY | RT2573_RF_20BIT | (val & 0xfffff) << 2 |
1499	    (reg & 3);
1500	rum_write(sc, RT2573_PHY_CSR4, tmp);
1501
1502	/* remember last written value in sc */
1503	sc->rf_regs[reg] = val;
1504
1505	DPRINTFN(15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0xfffff);
1506}
1507
1508static void
1509rum_select_antenna(struct rum_softc *sc)
1510{
1511	uint8_t bbp4, bbp77;
1512	uint32_t tmp;
1513
1514	bbp4  = rum_bbp_read(sc, 4);
1515	bbp77 = rum_bbp_read(sc, 77);
1516
1517	/* TBD */
1518
1519	/* make sure Rx is disabled before switching antenna */
1520	tmp = rum_read(sc, RT2573_TXRX_CSR0);
1521	rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX);
1522
1523	rum_bbp_write(sc,  4, bbp4);
1524	rum_bbp_write(sc, 77, bbp77);
1525
1526	rum_write(sc, RT2573_TXRX_CSR0, tmp);
1527}
1528
1529/*
1530 * Enable multi-rate retries for frames sent at OFDM rates.
1531 * In 802.11b/g mode, allow fallback to CCK rates.
1532 */
1533static void
1534rum_enable_mrr(struct rum_softc *sc)
1535{
1536	struct ifnet *ifp = sc->sc_ifp;
1537	struct ieee80211com *ic = ifp->if_l2com;
1538	uint32_t tmp;
1539
1540	tmp = rum_read(sc, RT2573_TXRX_CSR4);
1541
1542	tmp &= ~RT2573_MRR_CCK_FALLBACK;
1543	if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
1544		tmp |= RT2573_MRR_CCK_FALLBACK;
1545	tmp |= RT2573_MRR_ENABLED;
1546
1547	rum_write(sc, RT2573_TXRX_CSR4, tmp);
1548}
1549
1550static void
1551rum_set_txpreamble(struct rum_softc *sc)
1552{
1553	struct ifnet *ifp = sc->sc_ifp;
1554	struct ieee80211com *ic = ifp->if_l2com;
1555	uint32_t tmp;
1556
1557	tmp = rum_read(sc, RT2573_TXRX_CSR4);
1558
1559	tmp &= ~RT2573_SHORT_PREAMBLE;
1560	if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
1561		tmp |= RT2573_SHORT_PREAMBLE;
1562
1563	rum_write(sc, RT2573_TXRX_CSR4, tmp);
1564}
1565
1566static void
1567rum_set_basicrates(struct rum_softc *sc)
1568{
1569	struct ifnet *ifp = sc->sc_ifp;
1570	struct ieee80211com *ic = ifp->if_l2com;
1571
1572	/* update basic rate set */
1573	if (ic->ic_curmode == IEEE80211_MODE_11B) {
1574		/* 11b basic rates: 1, 2Mbps */
1575		rum_write(sc, RT2573_TXRX_CSR5, 0x3);
1576	} else if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) {
1577		/* 11a basic rates: 6, 12, 24Mbps */
1578		rum_write(sc, RT2573_TXRX_CSR5, 0x150);
1579	} else {
1580		/* 11b/g basic rates: 1, 2, 5.5, 11Mbps */
1581		rum_write(sc, RT2573_TXRX_CSR5, 0xf);
1582	}
1583}
1584
1585/*
1586 * Reprogram MAC/BBP to switch to a new band.  Values taken from the reference
1587 * driver.
1588 */
1589static void
1590rum_select_band(struct rum_softc *sc, struct ieee80211_channel *c)
1591{
1592	uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104;
1593	uint32_t tmp;
1594
1595	/* update all BBP registers that depend on the band */
1596	bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c;
1597	bbp35 = 0x50; bbp97 = 0x48; bbp98  = 0x48;
1598	if (IEEE80211_IS_CHAN_5GHZ(c)) {
1599		bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c;
1600		bbp35 += 0x10; bbp97 += 0x10; bbp98  += 0x10;
1601	}
1602	if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
1603	    (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
1604		bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10;
1605	}
1606
1607	sc->bbp17 = bbp17;
1608	rum_bbp_write(sc,  17, bbp17);
1609	rum_bbp_write(sc,  96, bbp96);
1610	rum_bbp_write(sc, 104, bbp104);
1611
1612	if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
1613	    (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
1614		rum_bbp_write(sc, 75, 0x80);
1615		rum_bbp_write(sc, 86, 0x80);
1616		rum_bbp_write(sc, 88, 0x80);
1617	}
1618
1619	rum_bbp_write(sc, 35, bbp35);
1620	rum_bbp_write(sc, 97, bbp97);
1621	rum_bbp_write(sc, 98, bbp98);
1622
1623	tmp = rum_read(sc, RT2573_PHY_CSR0);
1624	tmp &= ~(RT2573_PA_PE_2GHZ | RT2573_PA_PE_5GHZ);
1625	if (IEEE80211_IS_CHAN_2GHZ(c))
1626		tmp |= RT2573_PA_PE_2GHZ;
1627	else
1628		tmp |= RT2573_PA_PE_5GHZ;
1629	rum_write(sc, RT2573_PHY_CSR0, tmp);
1630}
1631
1632static void
1633rum_set_chan(struct rum_softc *sc, struct ieee80211_channel *c)
1634{
1635	struct ifnet *ifp = sc->sc_ifp;
1636	struct ieee80211com *ic = ifp->if_l2com;
1637	const struct rfprog *rfprog;
1638	uint8_t bbp3, bbp94 = RT2573_BBPR94_DEFAULT;
1639	int8_t power;
1640	int i, chan;
1641
1642	chan = ieee80211_chan2ieee(ic, c);
1643	if (chan == 0 || chan == IEEE80211_CHAN_ANY)
1644		return;
1645
1646	/* select the appropriate RF settings based on what EEPROM says */
1647	rfprog = (sc->rf_rev == RT2573_RF_5225 ||
1648		  sc->rf_rev == RT2573_RF_2527) ? rum_rf5225 : rum_rf5226;
1649
1650	/* find the settings for this channel (we know it exists) */
1651	for (i = 0; rfprog[i].chan != chan; i++);
1652
1653	power = sc->txpow[i];
1654	if (power < 0) {
1655		bbp94 += power;
1656		power = 0;
1657	} else if (power > 31) {
1658		bbp94 += power - 31;
1659		power = 31;
1660	}
1661
1662	/*
1663	 * If we are switching from the 2GHz band to the 5GHz band or
1664	 * vice-versa, BBP registers need to be reprogrammed.
1665	 */
1666	if (c->ic_flags != ic->ic_curchan->ic_flags) {
1667		rum_select_band(sc, c);
1668		rum_select_antenna(sc);
1669	}
1670	ic->ic_curchan = c;
1671
1672	rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1673	rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1674	rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7);
1675	rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1676
1677	rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1678	rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1679	rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7 | 1);
1680	rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1681
1682	rum_rf_write(sc, RT2573_RF1, rfprog[i].r1);
1683	rum_rf_write(sc, RT2573_RF2, rfprog[i].r2);
1684	rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7);
1685	rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10);
1686
1687	rum_pause(sc, hz / 100);
1688
1689	/* enable smart mode for MIMO-capable RFs */
1690	bbp3 = rum_bbp_read(sc, 3);
1691
1692	bbp3 &= ~RT2573_SMART_MODE;
1693	if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_2527)
1694		bbp3 |= RT2573_SMART_MODE;
1695
1696	rum_bbp_write(sc, 3, bbp3);
1697
1698	if (bbp94 != RT2573_BBPR94_DEFAULT)
1699		rum_bbp_write(sc, 94, bbp94);
1700
1701	/* give the chip some extra time to do the switchover */
1702	rum_pause(sc, hz / 100);
1703}
1704
1705/*
1706 * Enable TSF synchronization and tell h/w to start sending beacons for IBSS
1707 * and HostAP operating modes.
1708 */
1709static void
1710rum_enable_tsf_sync(struct rum_softc *sc)
1711{
1712	struct ifnet *ifp = sc->sc_ifp;
1713	struct ieee80211com *ic = ifp->if_l2com;
1714	struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
1715	uint32_t tmp;
1716
1717	if (vap->iv_opmode != IEEE80211_M_STA) {
1718		/*
1719		 * Change default 16ms TBTT adjustment to 8ms.
1720		 * Must be done before enabling beacon generation.
1721		 */
1722		rum_write(sc, RT2573_TXRX_CSR10, 1 << 12 | 8);
1723	}
1724
1725	tmp = rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000;
1726
1727	/* set beacon interval (in 1/16ms unit) */
1728	tmp |= vap->iv_bss->ni_intval * 16;
1729
1730	tmp |= RT2573_TSF_TICKING | RT2573_ENABLE_TBTT;
1731	if (vap->iv_opmode == IEEE80211_M_STA)
1732		tmp |= RT2573_TSF_MODE(1);
1733	else
1734		tmp |= RT2573_TSF_MODE(2) | RT2573_GENERATE_BEACON;
1735
1736	rum_write(sc, RT2573_TXRX_CSR9, tmp);
1737}
1738
1739static void
1740rum_enable_tsf(struct rum_softc *sc)
1741{
1742	rum_write(sc, RT2573_TXRX_CSR9,
1743	    (rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000) |
1744	    RT2573_TSF_TICKING | RT2573_TSF_MODE(2));
1745}
1746
1747static void
1748rum_update_slot(struct ifnet *ifp)
1749{
1750	struct rum_softc *sc = ifp->if_softc;
1751	struct ieee80211com *ic = ifp->if_l2com;
1752	uint8_t slottime;
1753	uint32_t tmp;
1754
1755	slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
1756
1757	tmp = rum_read(sc, RT2573_MAC_CSR9);
1758	tmp = (tmp & ~0xff) | slottime;
1759	rum_write(sc, RT2573_MAC_CSR9, tmp);
1760
1761	DPRINTF("setting slot time to %uus\n", slottime);
1762}
1763
1764static void
1765rum_set_bssid(struct rum_softc *sc, const uint8_t *bssid)
1766{
1767	uint32_t tmp;
1768
1769	tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24;
1770	rum_write(sc, RT2573_MAC_CSR4, tmp);
1771
1772	tmp = bssid[4] | bssid[5] << 8 | RT2573_ONE_BSSID << 16;
1773	rum_write(sc, RT2573_MAC_CSR5, tmp);
1774}
1775
1776static void
1777rum_set_macaddr(struct rum_softc *sc, const uint8_t *addr)
1778{
1779	uint32_t tmp;
1780
1781	tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24;
1782	rum_write(sc, RT2573_MAC_CSR2, tmp);
1783
1784	tmp = addr[4] | addr[5] << 8 | 0xff << 16;
1785	rum_write(sc, RT2573_MAC_CSR3, tmp);
1786}
1787
1788static void
1789rum_setpromisc(struct rum_softc *sc)
1790{
1791	struct ifnet *ifp = sc->sc_ifp;
1792	uint32_t tmp;
1793
1794	tmp = rum_read(sc, RT2573_TXRX_CSR0);
1795
1796	tmp &= ~RT2573_DROP_NOT_TO_ME;
1797	if (!(ifp->if_flags & IFF_PROMISC))
1798		tmp |= RT2573_DROP_NOT_TO_ME;
1799
1800	rum_write(sc, RT2573_TXRX_CSR0, tmp);
1801
1802	DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ?
1803	    "entering" : "leaving");
1804}
1805
1806static void
1807rum_update_promisc(struct ifnet *ifp)
1808{
1809	struct rum_softc *sc = ifp->if_softc;
1810
1811	if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
1812		return;
1813
1814	RUM_LOCK(sc);
1815	rum_setpromisc(sc);
1816	RUM_UNLOCK(sc);
1817}
1818
1819static void
1820rum_update_mcast(struct ifnet *ifp)
1821{
1822
1823	/* XXX do nothing? */
1824}
1825
1826static const char *
1827rum_get_rf(int rev)
1828{
1829	switch (rev) {
1830	case RT2573_RF_2527:	return "RT2527 (MIMO XR)";
1831	case RT2573_RF_2528:	return "RT2528";
1832	case RT2573_RF_5225:	return "RT5225 (MIMO XR)";
1833	case RT2573_RF_5226:	return "RT5226";
1834	default:		return "unknown";
1835	}
1836}
1837
1838static void
1839rum_read_eeprom(struct rum_softc *sc)
1840{
1841	uint16_t val;
1842#ifdef RUM_DEBUG
1843	int i;
1844#endif
1845
1846	/* read MAC address */
1847	rum_eeprom_read(sc, RT2573_EEPROM_ADDRESS, sc->sc_bssid, 6);
1848
1849	rum_eeprom_read(sc, RT2573_EEPROM_ANTENNA, &val, 2);
1850	val = le16toh(val);
1851	sc->rf_rev =   (val >> 11) & 0x1f;
1852	sc->hw_radio = (val >> 10) & 0x1;
1853	sc->rx_ant =   (val >> 4)  & 0x3;
1854	sc->tx_ant =   (val >> 2)  & 0x3;
1855	sc->nb_ant =   val & 0x3;
1856
1857	DPRINTF("RF revision=%d\n", sc->rf_rev);
1858
1859	rum_eeprom_read(sc, RT2573_EEPROM_CONFIG2, &val, 2);
1860	val = le16toh(val);
1861	sc->ext_5ghz_lna = (val >> 6) & 0x1;
1862	sc->ext_2ghz_lna = (val >> 4) & 0x1;
1863
1864	DPRINTF("External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n",
1865	    sc->ext_2ghz_lna, sc->ext_5ghz_lna);
1866
1867	rum_eeprom_read(sc, RT2573_EEPROM_RSSI_2GHZ_OFFSET, &val, 2);
1868	val = le16toh(val);
1869	if ((val & 0xff) != 0xff)
1870		sc->rssi_2ghz_corr = (int8_t)(val & 0xff);	/* signed */
1871
1872	/* Only [-10, 10] is valid */
1873	if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10)
1874		sc->rssi_2ghz_corr = 0;
1875
1876	rum_eeprom_read(sc, RT2573_EEPROM_RSSI_5GHZ_OFFSET, &val, 2);
1877	val = le16toh(val);
1878	if ((val & 0xff) != 0xff)
1879		sc->rssi_5ghz_corr = (int8_t)(val & 0xff);	/* signed */
1880
1881	/* Only [-10, 10] is valid */
1882	if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10)
1883		sc->rssi_5ghz_corr = 0;
1884
1885	if (sc->ext_2ghz_lna)
1886		sc->rssi_2ghz_corr -= 14;
1887	if (sc->ext_5ghz_lna)
1888		sc->rssi_5ghz_corr -= 14;
1889
1890	DPRINTF("RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n",
1891	    sc->rssi_2ghz_corr, sc->rssi_5ghz_corr);
1892
1893	rum_eeprom_read(sc, RT2573_EEPROM_FREQ_OFFSET, &val, 2);
1894	val = le16toh(val);
1895	if ((val & 0xff) != 0xff)
1896		sc->rffreq = val & 0xff;
1897
1898	DPRINTF("RF freq=%d\n", sc->rffreq);
1899
1900	/* read Tx power for all a/b/g channels */
1901	rum_eeprom_read(sc, RT2573_EEPROM_TXPOWER, sc->txpow, 14);
1902	/* XXX default Tx power for 802.11a channels */
1903	memset(sc->txpow + 14, 24, sizeof (sc->txpow) - 14);
1904#ifdef RUM_DEBUG
1905	for (i = 0; i < 14; i++)
1906		DPRINTF("Channel=%d Tx power=%d\n", i + 1,  sc->txpow[i]);
1907#endif
1908
1909	/* read default values for BBP registers */
1910	rum_eeprom_read(sc, RT2573_EEPROM_BBP_BASE, sc->bbp_prom, 2 * 16);
1911#ifdef RUM_DEBUG
1912	for (i = 0; i < 14; i++) {
1913		if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff)
1914			continue;
1915		DPRINTF("BBP R%d=%02x\n", sc->bbp_prom[i].reg,
1916		    sc->bbp_prom[i].val);
1917	}
1918#endif
1919}
1920
1921static int
1922rum_bbp_init(struct rum_softc *sc)
1923{
1924#define N(a)	(sizeof (a) / sizeof ((a)[0]))
1925	int i, ntries;
1926
1927	/* wait for BBP to be ready */
1928	for (ntries = 0; ntries < 100; ntries++) {
1929		const uint8_t val = rum_bbp_read(sc, 0);
1930		if (val != 0 && val != 0xff)
1931			break;
1932		if (rum_pause(sc, hz / 100))
1933			break;
1934	}
1935	if (ntries == 100) {
1936		device_printf(sc->sc_dev, "timeout waiting for BBP\n");
1937		return EIO;
1938	}
1939
1940	/* initialize BBP registers to default values */
1941	for (i = 0; i < N(rum_def_bbp); i++)
1942		rum_bbp_write(sc, rum_def_bbp[i].reg, rum_def_bbp[i].val);
1943
1944	/* write vendor-specific BBP values (from EEPROM) */
1945	for (i = 0; i < 16; i++) {
1946		if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff)
1947			continue;
1948		rum_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val);
1949	}
1950
1951	return 0;
1952#undef N
1953}
1954
1955static void
1956rum_init_locked(struct rum_softc *sc)
1957{
1958#define N(a)	(sizeof (a) / sizeof ((a)[0]))
1959	struct ifnet *ifp = sc->sc_ifp;
1960	struct ieee80211com *ic = ifp->if_l2com;
1961	uint32_t tmp;
1962	usb_error_t error;
1963	int i, ntries;
1964
1965	RUM_LOCK_ASSERT(sc, MA_OWNED);
1966
1967	rum_stop(sc);
1968
1969	/* initialize MAC registers to default values */
1970	for (i = 0; i < N(rum_def_mac); i++)
1971		rum_write(sc, rum_def_mac[i].reg, rum_def_mac[i].val);
1972
1973	/* set host ready */
1974	rum_write(sc, RT2573_MAC_CSR1, 3);
1975	rum_write(sc, RT2573_MAC_CSR1, 0);
1976
1977	/* wait for BBP/RF to wakeup */
1978	for (ntries = 0; ntries < 100; ntries++) {
1979		if (rum_read(sc, RT2573_MAC_CSR12) & 8)
1980			break;
1981		rum_write(sc, RT2573_MAC_CSR12, 4);	/* force wakeup */
1982		if (rum_pause(sc, hz / 100))
1983			break;
1984	}
1985	if (ntries == 100) {
1986		device_printf(sc->sc_dev,
1987		    "timeout waiting for BBP/RF to wakeup\n");
1988		goto fail;
1989	}
1990
1991	if ((error = rum_bbp_init(sc)) != 0)
1992		goto fail;
1993
1994	/* select default channel */
1995	rum_select_band(sc, ic->ic_curchan);
1996	rum_select_antenna(sc);
1997	rum_set_chan(sc, ic->ic_curchan);
1998
1999	/* clear STA registers */
2000	rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
2001
2002	rum_set_macaddr(sc, IF_LLADDR(ifp));
2003
2004	/* initialize ASIC */
2005	rum_write(sc, RT2573_MAC_CSR1, 4);
2006
2007	/*
2008	 * Allocate Tx and Rx xfer queues.
2009	 */
2010	rum_setup_tx_list(sc);
2011
2012	/* update Rx filter */
2013	tmp = rum_read(sc, RT2573_TXRX_CSR0) & 0xffff;
2014
2015	tmp |= RT2573_DROP_PHY_ERROR | RT2573_DROP_CRC_ERROR;
2016	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
2017		tmp |= RT2573_DROP_CTL | RT2573_DROP_VER_ERROR |
2018		       RT2573_DROP_ACKCTS;
2019		if (ic->ic_opmode != IEEE80211_M_HOSTAP)
2020			tmp |= RT2573_DROP_TODS;
2021		if (!(ifp->if_flags & IFF_PROMISC))
2022			tmp |= RT2573_DROP_NOT_TO_ME;
2023	}
2024	rum_write(sc, RT2573_TXRX_CSR0, tmp);
2025
2026	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
2027	ifp->if_drv_flags |= IFF_DRV_RUNNING;
2028	usbd_xfer_set_stall(sc->sc_xfer[RUM_BULK_WR]);
2029	usbd_transfer_start(sc->sc_xfer[RUM_BULK_RD]);
2030	return;
2031
2032fail:	rum_stop(sc);
2033#undef N
2034}
2035
2036static void
2037rum_init(void *priv)
2038{
2039	struct rum_softc *sc = priv;
2040	struct ifnet *ifp = sc->sc_ifp;
2041	struct ieee80211com *ic = ifp->if_l2com;
2042
2043	RUM_LOCK(sc);
2044	rum_init_locked(sc);
2045	RUM_UNLOCK(sc);
2046
2047	if (ifp->if_drv_flags & IFF_DRV_RUNNING)
2048		ieee80211_start_all(ic);		/* start all vap's */
2049}
2050
2051static void
2052rum_stop(struct rum_softc *sc)
2053{
2054	struct ifnet *ifp = sc->sc_ifp;
2055	uint32_t tmp;
2056
2057	RUM_LOCK_ASSERT(sc, MA_OWNED);
2058
2059	ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
2060
2061	RUM_UNLOCK(sc);
2062
2063	/*
2064	 * Drain the USB transfers, if not already drained:
2065	 */
2066	usbd_transfer_drain(sc->sc_xfer[RUM_BULK_WR]);
2067	usbd_transfer_drain(sc->sc_xfer[RUM_BULK_RD]);
2068
2069	RUM_LOCK(sc);
2070
2071	rum_unsetup_tx_list(sc);
2072
2073	/* disable Rx */
2074	tmp = rum_read(sc, RT2573_TXRX_CSR0);
2075	rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX);
2076
2077	/* reset ASIC */
2078	rum_write(sc, RT2573_MAC_CSR1, 3);
2079	rum_write(sc, RT2573_MAC_CSR1, 0);
2080}
2081
2082static void
2083rum_load_microcode(struct rum_softc *sc, const uint8_t *ucode, size_t size)
2084{
2085	struct usb_device_request req;
2086	uint16_t reg = RT2573_MCU_CODE_BASE;
2087	usb_error_t err;
2088
2089	/* copy firmware image into NIC */
2090	for (; size >= 4; reg += 4, ucode += 4, size -= 4) {
2091		err = rum_write(sc, reg, UGETDW(ucode));
2092		if (err) {
2093			/* firmware already loaded ? */
2094			device_printf(sc->sc_dev, "Firmware load "
2095			    "failure! (ignored)\n");
2096			break;
2097		}
2098	}
2099
2100	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
2101	req.bRequest = RT2573_MCU_CNTL;
2102	USETW(req.wValue, RT2573_MCU_RUN);
2103	USETW(req.wIndex, 0);
2104	USETW(req.wLength, 0);
2105
2106	err = rum_do_request(sc, &req, NULL);
2107	if (err != 0) {
2108		device_printf(sc->sc_dev, "could not run firmware: %s\n",
2109		    usbd_errstr(err));
2110	}
2111
2112	/* give the chip some time to boot */
2113	rum_pause(sc, hz / 8);
2114}
2115
2116static int
2117rum_prepare_beacon(struct rum_softc *sc, struct ieee80211vap *vap)
2118{
2119	struct ieee80211com *ic = vap->iv_ic;
2120	const struct ieee80211_txparam *tp;
2121	struct rum_tx_desc desc;
2122	struct mbuf *m0;
2123
2124	m0 = ieee80211_beacon_alloc(vap->iv_bss, &RUM_VAP(vap)->bo);
2125	if (m0 == NULL) {
2126		return ENOBUFS;
2127	}
2128
2129	tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_bsschan)];
2130	rum_setup_tx_desc(sc, &desc, RT2573_TX_TIMESTAMP, RT2573_TX_HWSEQ,
2131	    m0->m_pkthdr.len, tp->mgmtrate);
2132
2133	/* copy the first 24 bytes of Tx descriptor into NIC memory */
2134	rum_write_multi(sc, RT2573_HW_BEACON_BASE0, (uint8_t *)&desc, 24);
2135
2136	/* copy beacon header and payload into NIC memory */
2137	rum_write_multi(sc, RT2573_HW_BEACON_BASE0 + 24, mtod(m0, uint8_t *),
2138	    m0->m_pkthdr.len);
2139
2140	m_freem(m0);
2141
2142	return 0;
2143}
2144
2145static int
2146rum_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
2147    const struct ieee80211_bpf_params *params)
2148{
2149	struct ifnet *ifp = ni->ni_ic->ic_ifp;
2150	struct rum_softc *sc = ifp->if_softc;
2151
2152	RUM_LOCK(sc);
2153	/* prevent management frames from being sent if we're not ready */
2154	if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
2155		RUM_UNLOCK(sc);
2156		m_freem(m);
2157		ieee80211_free_node(ni);
2158		return ENETDOWN;
2159	}
2160	if (sc->tx_nfree < RUM_TX_MINFREE) {
2161		ifp->if_drv_flags |= IFF_DRV_OACTIVE;
2162		RUM_UNLOCK(sc);
2163		m_freem(m);
2164		ieee80211_free_node(ni);
2165		return EIO;
2166	}
2167
2168	ifp->if_opackets++;
2169
2170	if (params == NULL) {
2171		/*
2172		 * Legacy path; interpret frame contents to decide
2173		 * precisely how to send the frame.
2174		 */
2175		if (rum_tx_mgt(sc, m, ni) != 0)
2176			goto bad;
2177	} else {
2178		/*
2179		 * Caller supplied explicit parameters to use in
2180		 * sending the frame.
2181		 */
2182		if (rum_tx_raw(sc, m, ni, params) != 0)
2183			goto bad;
2184	}
2185	RUM_UNLOCK(sc);
2186
2187	return 0;
2188bad:
2189	ifp->if_oerrors++;
2190	RUM_UNLOCK(sc);
2191	ieee80211_free_node(ni);
2192	return EIO;
2193}
2194
2195static void
2196rum_ratectl_start(struct rum_softc *sc, struct ieee80211_node *ni)
2197{
2198	struct ieee80211vap *vap = ni->ni_vap;
2199	struct rum_vap *rvp = RUM_VAP(vap);
2200
2201	/* clear statistic registers (STA_CSR0 to STA_CSR5) */
2202	rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof sc->sta);
2203
2204	ieee80211_ratectl_node_init(ni);
2205
2206	usb_callout_reset(&rvp->ratectl_ch, hz, rum_ratectl_timeout, rvp);
2207}
2208
2209static void
2210rum_ratectl_timeout(void *arg)
2211{
2212	struct rum_vap *rvp = arg;
2213	struct ieee80211vap *vap = &rvp->vap;
2214	struct ieee80211com *ic = vap->iv_ic;
2215
2216	ieee80211_runtask(ic, &rvp->ratectl_task);
2217}
2218
2219static void
2220rum_ratectl_task(void *arg, int pending)
2221{
2222	struct rum_vap *rvp = arg;
2223	struct ieee80211vap *vap = &rvp->vap;
2224	struct ieee80211com *ic = vap->iv_ic;
2225	struct ifnet *ifp = ic->ic_ifp;
2226	struct rum_softc *sc = ifp->if_softc;
2227	struct ieee80211_node *ni;
2228	int ok, fail;
2229	int sum, retrycnt;
2230
2231	RUM_LOCK(sc);
2232	/* read and clear statistic registers (STA_CSR0 to STA_CSR10) */
2233	rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof(sc->sta));
2234
2235	ok = (le32toh(sc->sta[4]) >> 16) +	/* TX ok w/o retry */
2236	    (le32toh(sc->sta[5]) & 0xffff);	/* TX ok w/ retry */
2237	fail = (le32toh(sc->sta[5]) >> 16);	/* TX retry-fail count */
2238	sum = ok+fail;
2239	retrycnt = (le32toh(sc->sta[5]) & 0xffff) + fail;
2240
2241	ni = ieee80211_ref_node(vap->iv_bss);
2242	ieee80211_ratectl_tx_update(vap, ni, &sum, &ok, &retrycnt);
2243	(void) ieee80211_ratectl_rate(ni, NULL, 0);
2244	ieee80211_free_node(ni);
2245
2246	ifp->if_oerrors += fail;	/* count TX retry-fail as Tx errors */
2247
2248	usb_callout_reset(&rvp->ratectl_ch, hz, rum_ratectl_timeout, rvp);
2249	RUM_UNLOCK(sc);
2250}
2251
2252static void
2253rum_scan_start(struct ieee80211com *ic)
2254{
2255	struct ifnet *ifp = ic->ic_ifp;
2256	struct rum_softc *sc = ifp->if_softc;
2257	uint32_t tmp;
2258
2259	RUM_LOCK(sc);
2260	/* abort TSF synchronization */
2261	tmp = rum_read(sc, RT2573_TXRX_CSR9);
2262	rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff);
2263	rum_set_bssid(sc, ifp->if_broadcastaddr);
2264	RUM_UNLOCK(sc);
2265
2266}
2267
2268static void
2269rum_scan_end(struct ieee80211com *ic)
2270{
2271	struct rum_softc *sc = ic->ic_ifp->if_softc;
2272
2273	RUM_LOCK(sc);
2274	rum_enable_tsf_sync(sc);
2275	rum_set_bssid(sc, sc->sc_bssid);
2276	RUM_UNLOCK(sc);
2277
2278}
2279
2280static void
2281rum_set_channel(struct ieee80211com *ic)
2282{
2283	struct rum_softc *sc = ic->ic_ifp->if_softc;
2284
2285	RUM_LOCK(sc);
2286	rum_set_chan(sc, ic->ic_curchan);
2287	RUM_UNLOCK(sc);
2288}
2289
2290static int
2291rum_get_rssi(struct rum_softc *sc, uint8_t raw)
2292{
2293	struct ifnet *ifp = sc->sc_ifp;
2294	struct ieee80211com *ic = ifp->if_l2com;
2295	int lna, agc, rssi;
2296
2297	lna = (raw >> 5) & 0x3;
2298	agc = raw & 0x1f;
2299
2300	if (lna == 0) {
2301		/*
2302		 * No RSSI mapping
2303		 *
2304		 * NB: Since RSSI is relative to noise floor, -1 is
2305		 *     adequate for caller to know error happened.
2306		 */
2307		return -1;
2308	}
2309
2310	rssi = (2 * agc) - RT2573_NOISE_FLOOR;
2311
2312	if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) {
2313		rssi += sc->rssi_2ghz_corr;
2314
2315		if (lna == 1)
2316			rssi -= 64;
2317		else if (lna == 2)
2318			rssi -= 74;
2319		else if (lna == 3)
2320			rssi -= 90;
2321	} else {
2322		rssi += sc->rssi_5ghz_corr;
2323
2324		if (!sc->ext_5ghz_lna && lna != 1)
2325			rssi += 4;
2326
2327		if (lna == 1)
2328			rssi -= 64;
2329		else if (lna == 2)
2330			rssi -= 86;
2331		else if (lna == 3)
2332			rssi -= 100;
2333	}
2334	return rssi;
2335}
2336
2337static int
2338rum_pause(struct rum_softc *sc, int timeout)
2339{
2340
2341	usb_pause_mtx(&sc->sc_mtx, timeout);
2342	return (0);
2343}
2344
2345static device_method_t rum_methods[] = {
2346	/* Device interface */
2347	DEVMETHOD(device_probe,		rum_match),
2348	DEVMETHOD(device_attach,	rum_attach),
2349	DEVMETHOD(device_detach,	rum_detach),
2350
2351	{ 0, 0 }
2352};
2353
2354static driver_t rum_driver = {
2355	.name = "rum",
2356	.methods = rum_methods,
2357	.size = sizeof(struct rum_softc),
2358};
2359
2360static devclass_t rum_devclass;
2361
2362DRIVER_MODULE(rum, uhub, rum_driver, rum_devclass, NULL, 0);
2363MODULE_DEPEND(rum, wlan, 1, 1, 1);
2364MODULE_DEPEND(rum, usb, 1, 1, 1);
2365MODULE_VERSION(rum, 1);
2366