usb_request.c revision 250204
194742Sobrien/* $FreeBSD: head/sys/dev/usb/usb_request.c 250204 2013-05-03 09:23:06Z hselasky $ */ 294742Sobrien/*- 3146890Speter * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 4146890Speter * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 5179626Speter * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 6146890Speter * 7146890Speter * Redistribution and use in source and binary forms, with or without 8146890Speter * modification, are permitted provided that the following conditions 9146890Speter * are met: 10146890Speter * 1. Redistributions of source code must retain the above copyright 11146890Speter * notice, this list of conditions and the following disclaimer. 12146890Speter * 2. Redistributions in binary form must reproduce the above copyright 13146890Speter * notice, this list of conditions and the following disclaimer in the 14146890Speter * documentation and/or other materials provided with the distribution. 15146890Speter * 16146890Speter * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17146890Speter * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18146890Speter * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19146890Speter * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20146890Speter * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 2194742Sobrien * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 2295253Sru * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23159014Sjmg * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 2494742Sobrien * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 2596991Srwatson * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 2696991Srwatson * SUCH DAMAGE. 2796991Srwatson */ 28102773Srwatson 29102773Srwatson#ifdef USB_GLOBAL_INCLUDE_FILE 30156279Srwatson#include USB_GLOBAL_INCLUDE_FILE 31156279Srwatson#else 3294917Simp#include <sys/stdint.h> 33126445Sobrien#include <sys/stddef.h> 3494917Simp#include <sys/param.h> 35146933Simp#include <sys/queue.h> 3694847Sjhb#include <sys/types.h> 3794847Sjhb#include <sys/systm.h> 3894847Sjhb#include <sys/kernel.h> 3994915Sken#include <sys/bus.h> 4099607Smjacob#include <sys/module.h> 4194915Sken#include <sys/lock.h> 4294915Sken#include <sys/mutex.h> 4394915Sken#include <sys/condvar.h> 4494915Sken#include <sys/sysctl.h> 4594915Sken#include <sys/sx.h> 4694915Sken#include <sys/unistd.h> 4794915Sken#include <sys/callout.h> 4894915Sken#include <sys/malloc.h> 49169922Sjfv#include <sys/priv.h> 5097611Sbillf 5194918Sgshapiro#include <dev/usb/usb.h> 5294918Sgshapiro#include <dev/usb/usbdi.h> 5394918Sgshapiro#include <dev/usb/usbdi_util.h> 5494918Sgshapiro#include <dev/usb/usb_ioctl.h> 5594918Sgshapiro#include <dev/usb/usbhid.h> 56106187Sdes 57106187Sdes#define USB_DEBUG_VAR usb_debug 5895455Sdes 5998750Sdes#include <dev/usb/usb_core.h> 60205686Sdes#include <dev/usb/usb_busdma.h> 61205686Sdes#include <dev/usb/usb_request.h> 62205686Sdes#include <dev/usb/usb_process.h> 6396268Sgad#include <dev/usb/usb_transfer.h> 6496268Sgad#include <dev/usb/usb_debug.h> 65116233Sgad#include <dev/usb/usb_device.h> 6696332Speter#include <dev/usb/usb_util.h> 6796332Speter#include <dev/usb/usb_dynamic.h> 6896332Speter 69100314Sru#include <dev/usb/usb_controller.h> 70146921Sru#include <dev/usb/usb_bus.h> 71146921Sru#include <sys/ctype.h> 7297611Sbillf#endif /* USB_GLOBAL_INCLUDE_FILE */ 73190171Srnoland 74115825Sfanfstatic int usb_no_cs_fail; 75126445Sobrien 76117645SdwmaloneSYSCTL_INT(_hw_usb, OID_AUTO, no_cs_fail, CTLFLAG_RW, 77118204Sbp &usb_no_cs_fail, 0, "USB clear stall failures are ignored, if set"); 78118204Sbp 79118204Sbpstatic int usb_full_ddesc; 80118204Sbp 81127337SmlaierSYSCTL_INT(_hw_usb, OID_AUTO, full_ddesc, CTLFLAG_RW, 82126445Sobrien &usb_full_ddesc, 0, "USB always read complete device descriptor, if set"); 83146837Sobrien 84146837Sobrien#ifdef USB_DEBUG 85146837Sobrien#ifdef USB_REQ_DEBUG 86146837Sobrien/* The following structures are used in connection to fault injection. */ 87133182Spjdstruct usb_ctrl_debug { 88148779Spjd int bus_index; /* target bus */ 89133182Spjd int dev_index; /* target address */ 90133182Spjd int ds_fail; /* fail data stage */ 91133182Spjd int ss_fail; /* fail status stage */ 92133182Spjd int ds_delay; /* data stage delay in ms */ 93133841Spjd int ss_delay; /* status stage delay in ms */ 94143521Spjd int bmRequestType_value; 95133182Spjd int bRequest_value; 96148779Spjd}; 97133182Spjd 98168419Spjdstruct usb_ctrl_debug_bits { 99132311Salfred uint16_t ds_delay; 100132311Salfred uint16_t ss_delay; 101132311Salfred uint8_t ds_fail:1; 102132268Salfred uint8_t ss_fail:1; 103158323Srodrigc uint8_t enabled:1; 104158323Srodrigc}; 105195405Sflz 106146960Simp/* The default is to disable fault injection. */ 107148772Scperciva 108148871Scpercivastatic struct usb_ctrl_debug usb_ctrl_debug = { 109161748Scperciva .bus_index = -1, 110162226Ssimon .dev_index = -1, 111149464Semax .bmRequestType_value = -1, 112149464Semax .bRequest_value = -1, 113149464Semax}; 114149464Semax 115149464SemaxSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_bus_fail, CTLFLAG_RW, 116151618Sceri &usb_ctrl_debug.bus_index, 0, "USB controller index to fail"); 117179534SrafanSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_dev_fail, CTLFLAG_RW, 118200194Scperciva &usb_ctrl_debug.dev_index, 0, "USB device address to fail"); 119200194ScpercivaSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_fail, CTLFLAG_RW, 120204061Sedwin &usb_ctrl_debug.ds_fail, 0, "USB fail data stage"); 121204061SedwinSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_fail, CTLFLAG_RW, 122204061Sedwin &usb_ctrl_debug.ss_fail, 0, "USB fail status stage"); 123204061SedwinSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_delay, CTLFLAG_RW, 124204061Sedwin &usb_ctrl_debug.ds_delay, 0, "USB data stage delay in ms"); 125204061SedwinSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_delay, CTLFLAG_RW, 126206396Scperciva &usb_ctrl_debug.ss_delay, 0, "USB status stage delay in ms"); 127206396ScpercivaSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rt_fail, CTLFLAG_RW, 128115822Sdougb &usb_ctrl_debug.bmRequestType_value, 0, "USB bmRequestType to fail"); 129115822SdougbSYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rv_fail, CTLFLAG_RW, 130115822Sdougb &usb_ctrl_debug.bRequest_value, 0, "USB bRequest to fail"); 131115822Sdougb 132115822Sdougb/*------------------------------------------------------------------------* 133115822Sdougb * usbd_get_debug_bits 134115822Sdougb * 135146629Sschweikh * This function is only useful in USB host mode. 136146629Sschweikh *------------------------------------------------------------------------*/ 137146629Sschweikhstatic void 138115822Sdougbusbd_get_debug_bits(struct usb_device *udev, struct usb_device_request *req, 139115822Sdougb struct usb_ctrl_debug_bits *dbg) 140146586Sschweikh{ 141 int temp; 142 143 memset(dbg, 0, sizeof(*dbg)); 144 145 /* Compute data stage delay */ 146 147 temp = usb_ctrl_debug.ds_delay; 148 if (temp < 0) 149 temp = 0; 150 else if (temp > (16*1024)) 151 temp = (16*1024); 152 153 dbg->ds_delay = temp; 154 155 /* Compute status stage delay */ 156 157 temp = usb_ctrl_debug.ss_delay; 158 if (temp < 0) 159 temp = 0; 160 else if (temp > (16*1024)) 161 temp = (16*1024); 162 163 dbg->ss_delay = temp; 164 165 /* Check if this control request should be failed */ 166 167 if (usbd_get_bus_index(udev) != usb_ctrl_debug.bus_index) 168 return; 169 170 if (usbd_get_device_index(udev) != usb_ctrl_debug.dev_index) 171 return; 172 173 temp = usb_ctrl_debug.bmRequestType_value; 174 175 if ((temp != req->bmRequestType) && (temp >= 0) && (temp <= 255)) 176 return; 177 178 temp = usb_ctrl_debug.bRequest_value; 179 180 if ((temp != req->bRequest) && (temp >= 0) && (temp <= 255)) 181 return; 182 183 temp = usb_ctrl_debug.ds_fail; 184 if (temp) 185 dbg->ds_fail = 1; 186 187 temp = usb_ctrl_debug.ss_fail; 188 if (temp) 189 dbg->ss_fail = 1; 190 191 dbg->enabled = 1; 192} 193#endif /* USB_REQ_DEBUG */ 194#endif /* USB_DEBUG */ 195 196/*------------------------------------------------------------------------* 197 * usbd_do_request_callback 198 * 199 * This function is the USB callback for generic USB Host control 200 * transfers. 201 *------------------------------------------------------------------------*/ 202void 203usbd_do_request_callback(struct usb_xfer *xfer, usb_error_t error) 204{ 205 ; /* workaround for a bug in "indent" */ 206 207 DPRINTF("st=%u\n", USB_GET_STATE(xfer)); 208 209 switch (USB_GET_STATE(xfer)) { 210 case USB_ST_SETUP: 211 usbd_transfer_submit(xfer); 212 break; 213 default: 214 cv_signal(&xfer->xroot->udev->ctrlreq_cv); 215 break; 216 } 217} 218 219/*------------------------------------------------------------------------* 220 * usb_do_clear_stall_callback 221 * 222 * This function is the USB callback for generic clear stall requests. 223 *------------------------------------------------------------------------*/ 224void 225usb_do_clear_stall_callback(struct usb_xfer *xfer, usb_error_t error) 226{ 227 struct usb_device_request req; 228 struct usb_device *udev; 229 struct usb_endpoint *ep; 230 struct usb_endpoint *ep_end; 231 struct usb_endpoint *ep_first; 232 usb_stream_t x; 233 uint8_t to; 234 235 udev = xfer->xroot->udev; 236 237 USB_BUS_LOCK(udev->bus); 238 239 /* round robin endpoint clear stall */ 240 241 ep = udev->ep_curr; 242 ep_end = udev->endpoints + udev->endpoints_max; 243 ep_first = udev->endpoints; 244 to = udev->endpoints_max; 245 246 switch (USB_GET_STATE(xfer)) { 247 case USB_ST_TRANSFERRED: 248tr_transferred: 249 /* reset error counter */ 250 udev->clear_stall_errors = 0; 251 252 if (ep == NULL) 253 goto tr_setup; /* device was unconfigured */ 254 if (ep->edesc && 255 ep->is_stalled) { 256 ep->toggle_next = 0; 257 ep->is_stalled = 0; 258 /* some hardware needs a callback to clear the data toggle */ 259 usbd_clear_stall_locked(udev, ep); 260 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 261 /* start the current or next transfer, if any */ 262 usb_command_wrapper(&ep->endpoint_q[x], 263 ep->endpoint_q[x].curr); 264 } 265 } 266 ep++; 267 268 case USB_ST_SETUP: 269tr_setup: 270 if (to == 0) 271 break; /* no endpoints - nothing to do */ 272 if ((ep < ep_first) || (ep >= ep_end)) 273 ep = ep_first; /* endpoint wrapped around */ 274 if (ep->edesc && 275 ep->is_stalled) { 276 277 /* setup a clear-stall packet */ 278 279 req.bmRequestType = UT_WRITE_ENDPOINT; 280 req.bRequest = UR_CLEAR_FEATURE; 281 USETW(req.wValue, UF_ENDPOINT_HALT); 282 req.wIndex[0] = ep->edesc->bEndpointAddress; 283 req.wIndex[1] = 0; 284 USETW(req.wLength, 0); 285 286 /* copy in the transfer */ 287 288 usbd_copy_in(xfer->frbuffers, 0, &req, sizeof(req)); 289 290 /* set length */ 291 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 292 xfer->nframes = 1; 293 USB_BUS_UNLOCK(udev->bus); 294 295 usbd_transfer_submit(xfer); 296 297 USB_BUS_LOCK(udev->bus); 298 break; 299 } 300 ep++; 301 to--; 302 goto tr_setup; 303 304 default: 305 if (error == USB_ERR_CANCELLED) 306 break; 307 308 DPRINTF("Clear stall failed.\n"); 309 310 /* 311 * Some VMs like VirtualBox always return failure on 312 * clear-stall which we sometimes should just ignore. 313 */ 314 if (usb_no_cs_fail) 315 goto tr_transferred; 316 if (udev->clear_stall_errors == USB_CS_RESET_LIMIT) 317 goto tr_setup; 318 319 if (error == USB_ERR_TIMEOUT) { 320 udev->clear_stall_errors = USB_CS_RESET_LIMIT; 321 DPRINTF("Trying to re-enumerate.\n"); 322 usbd_start_re_enumerate(udev); 323 } else { 324 udev->clear_stall_errors++; 325 if (udev->clear_stall_errors == USB_CS_RESET_LIMIT) { 326 DPRINTF("Trying to re-enumerate.\n"); 327 usbd_start_re_enumerate(udev); 328 } 329 } 330 goto tr_setup; 331 } 332 333 /* store current endpoint */ 334 udev->ep_curr = ep; 335 USB_BUS_UNLOCK(udev->bus); 336} 337 338static usb_handle_req_t * 339usbd_get_hr_func(struct usb_device *udev) 340{ 341 /* figure out if there is a Handle Request function */ 342 if (udev->flags.usb_mode == USB_MODE_DEVICE) 343 return (usb_temp_get_desc_p); 344 else if (udev->parent_hub == NULL) 345 return (udev->bus->methods->roothub_exec); 346 else 347 return (NULL); 348} 349 350/*------------------------------------------------------------------------* 351 * usbd_do_request_flags and usbd_do_request 352 * 353 * Description of arguments passed to these functions: 354 * 355 * "udev" - this is the "usb_device" structure pointer on which the 356 * request should be performed. It is possible to call this function 357 * in both Host Side mode and Device Side mode. 358 * 359 * "mtx" - if this argument is non-NULL the mutex pointed to by it 360 * will get dropped and picked up during the execution of this 361 * function, hence this function sometimes needs to sleep. If this 362 * argument is NULL it has no effect. 363 * 364 * "req" - this argument must always be non-NULL and points to an 365 * 8-byte structure holding the USB request to be done. The USB 366 * request structure has a bit telling the direction of the USB 367 * request, if it is a read or a write. 368 * 369 * "data" - if the "wLength" part of the structure pointed to by "req" 370 * is non-zero this argument must point to a valid kernel buffer which 371 * can hold at least "wLength" bytes. If "wLength" is zero "data" can 372 * be NULL. 373 * 374 * "flags" - here is a list of valid flags: 375 * 376 * o USB_SHORT_XFER_OK: allows the data transfer to be shorter than 377 * specified 378 * 379 * o USB_DELAY_STATUS_STAGE: allows the status stage to be performed 380 * at a later point in time. This is tunable by the "hw.usb.ss_delay" 381 * sysctl. This flag is mostly useful for debugging. 382 * 383 * o USB_USER_DATA_PTR: treat the "data" pointer like a userland 384 * pointer. 385 * 386 * "actlen" - if non-NULL the actual transfer length will be stored in 387 * the 16-bit unsigned integer pointed to by "actlen". This 388 * information is mostly useful when the "USB_SHORT_XFER_OK" flag is 389 * used. 390 * 391 * "timeout" - gives the timeout for the control transfer in 392 * milliseconds. A "timeout" value less than 50 milliseconds is 393 * treated like a 50 millisecond timeout. A "timeout" value greater 394 * than 30 seconds is treated like a 30 second timeout. This USB stack 395 * does not allow control requests without a timeout. 396 * 397 * NOTE: This function is thread safe. All calls to "usbd_do_request_flags" 398 * will be serialized by the use of the USB device enumeration lock. 399 * 400 * Returns: 401 * 0: Success 402 * Else: Failure 403 *------------------------------------------------------------------------*/ 404usb_error_t 405usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx, 406 struct usb_device_request *req, void *data, uint16_t flags, 407 uint16_t *actlen, usb_timeout_t timeout) 408{ 409#ifdef USB_REQ_DEBUG 410 struct usb_ctrl_debug_bits dbg; 411#endif 412 usb_handle_req_t *hr_func; 413 struct usb_xfer *xfer; 414 const void *desc; 415 int err = 0; 416 usb_ticks_t start_ticks; 417 usb_ticks_t delta_ticks; 418 usb_ticks_t max_ticks; 419 uint16_t length; 420 uint16_t temp; 421 uint16_t acttemp; 422 uint8_t do_unlock; 423 424 if (timeout < 50) { 425 /* timeout is too small */ 426 timeout = 50; 427 } 428 if (timeout > 30000) { 429 /* timeout is too big */ 430 timeout = 30000; 431 } 432 length = UGETW(req->wLength); 433 434 DPRINTFN(5, "udev=%p bmRequestType=0x%02x bRequest=0x%02x " 435 "wValue=0x%02x%02x wIndex=0x%02x%02x wLength=0x%02x%02x\n", 436 udev, req->bmRequestType, req->bRequest, 437 req->wValue[1], req->wValue[0], 438 req->wIndex[1], req->wIndex[0], 439 req->wLength[1], req->wLength[0]); 440 441 /* Check if the device is still alive */ 442 if (udev->state < USB_STATE_POWERED) { 443 DPRINTF("usb device has gone\n"); 444 return (USB_ERR_NOT_CONFIGURED); 445 } 446 447 /* 448 * Set "actlen" to a known value in case the caller does not 449 * check the return value: 450 */ 451 if (actlen) 452 *actlen = 0; 453 454#if (USB_HAVE_USER_IO == 0) 455 if (flags & USB_USER_DATA_PTR) 456 return (USB_ERR_INVAL); 457#endif 458 if ((mtx != NULL) && (mtx != &Giant)) { 459 mtx_unlock(mtx); 460 mtx_assert(mtx, MA_NOTOWNED); 461 } 462 463 /* 464 * Grab the USB device enumeration SX-lock serialization is 465 * achieved when multiple threads are involved: 466 */ 467 do_unlock = usbd_enum_lock(udev); 468 469 /* 470 * We need to allow suspend and resume at this point, else the 471 * control transfer will timeout if the device is suspended! 472 */ 473 usbd_sr_unlock(udev); 474 475 hr_func = usbd_get_hr_func(udev); 476 477 if (hr_func != NULL) { 478 DPRINTF("Handle Request function is set\n"); 479 480 desc = NULL; 481 temp = 0; 482 483 if (!(req->bmRequestType & UT_READ)) { 484 if (length != 0) { 485 DPRINTFN(1, "The handle request function " 486 "does not support writing data!\n"); 487 err = USB_ERR_INVAL; 488 goto done; 489 } 490 } 491 492 /* The root HUB code needs the BUS lock locked */ 493 494 USB_BUS_LOCK(udev->bus); 495 err = (hr_func) (udev, req, &desc, &temp); 496 USB_BUS_UNLOCK(udev->bus); 497 498 if (err) 499 goto done; 500 501 if (length > temp) { 502 if (!(flags & USB_SHORT_XFER_OK)) { 503 err = USB_ERR_SHORT_XFER; 504 goto done; 505 } 506 length = temp; 507 } 508 if (actlen) 509 *actlen = length; 510 511 if (length > 0) { 512#if USB_HAVE_USER_IO 513 if (flags & USB_USER_DATA_PTR) { 514 if (copyout(desc, data, length)) { 515 err = USB_ERR_INVAL; 516 goto done; 517 } 518 } else 519#endif 520 memcpy(data, desc, length); 521 } 522 goto done; /* success */ 523 } 524 525 /* 526 * Setup a new USB transfer or use the existing one, if any: 527 */ 528 usbd_ctrl_transfer_setup(udev); 529 530 xfer = udev->ctrl_xfer[0]; 531 if (xfer == NULL) { 532 /* most likely out of memory */ 533 err = USB_ERR_NOMEM; 534 goto done; 535 } 536 537#ifdef USB_REQ_DEBUG 538 /* Get debug bits */ 539 usbd_get_debug_bits(udev, req, &dbg); 540 541 /* Check for fault injection */ 542 if (dbg.enabled) 543 flags |= USB_DELAY_STATUS_STAGE; 544#endif 545 USB_XFER_LOCK(xfer); 546 547 if (flags & USB_DELAY_STATUS_STAGE) 548 xfer->flags.manual_status = 1; 549 else 550 xfer->flags.manual_status = 0; 551 552 if (flags & USB_SHORT_XFER_OK) 553 xfer->flags.short_xfer_ok = 1; 554 else 555 xfer->flags.short_xfer_ok = 0; 556 557 xfer->timeout = timeout; 558 559 start_ticks = ticks; 560 561 max_ticks = USB_MS_TO_TICKS(timeout); 562 563 usbd_copy_in(xfer->frbuffers, 0, req, sizeof(*req)); 564 565 usbd_xfer_set_frame_len(xfer, 0, sizeof(*req)); 566 567 while (1) { 568 temp = length; 569 if (temp > usbd_xfer_max_len(xfer)) { 570 temp = usbd_xfer_max_len(xfer); 571 } 572#ifdef USB_REQ_DEBUG 573 if (xfer->flags.manual_status) { 574 if (usbd_xfer_frame_len(xfer, 0) != 0) { 575 /* Execute data stage separately */ 576 temp = 0; 577 } else if (temp > 0) { 578 if (dbg.ds_fail) { 579 err = USB_ERR_INVAL; 580 break; 581 } 582 if (dbg.ds_delay > 0) { 583 usb_pause_mtx( 584 xfer->xroot->xfer_mtx, 585 USB_MS_TO_TICKS(dbg.ds_delay)); 586 /* make sure we don't time out */ 587 start_ticks = ticks; 588 } 589 } 590 } 591#endif 592 usbd_xfer_set_frame_len(xfer, 1, temp); 593 594 if (temp > 0) { 595 if (!(req->bmRequestType & UT_READ)) { 596#if USB_HAVE_USER_IO 597 if (flags & USB_USER_DATA_PTR) { 598 USB_XFER_UNLOCK(xfer); 599 err = usbd_copy_in_user(xfer->frbuffers + 1, 600 0, data, temp); 601 USB_XFER_LOCK(xfer); 602 if (err) { 603 err = USB_ERR_INVAL; 604 break; 605 } 606 } else 607#endif 608 usbd_copy_in(xfer->frbuffers + 1, 609 0, data, temp); 610 } 611 usbd_xfer_set_frames(xfer, 2); 612 } else { 613 if (usbd_xfer_frame_len(xfer, 0) == 0) { 614 if (xfer->flags.manual_status) { 615#ifdef USB_REQ_DEBUG 616 if (dbg.ss_fail) { 617 err = USB_ERR_INVAL; 618 break; 619 } 620 if (dbg.ss_delay > 0) { 621 usb_pause_mtx( 622 xfer->xroot->xfer_mtx, 623 USB_MS_TO_TICKS(dbg.ss_delay)); 624 /* make sure we don't time out */ 625 start_ticks = ticks; 626 } 627#endif 628 xfer->flags.manual_status = 0; 629 } else { 630 break; 631 } 632 } 633 usbd_xfer_set_frames(xfer, 1); 634 } 635 636 usbd_transfer_start(xfer); 637 638 while (usbd_transfer_pending(xfer)) { 639 cv_wait(&udev->ctrlreq_cv, 640 xfer->xroot->xfer_mtx); 641 } 642 643 err = xfer->error; 644 645 if (err) { 646 break; 647 } 648 649 /* get actual length of DATA stage */ 650 651 if (xfer->aframes < 2) { 652 acttemp = 0; 653 } else { 654 acttemp = usbd_xfer_frame_len(xfer, 1); 655 } 656 657 /* check for short packet */ 658 659 if (temp > acttemp) { 660 temp = acttemp; 661 length = temp; 662 } 663 if (temp > 0) { 664 if (req->bmRequestType & UT_READ) { 665#if USB_HAVE_USER_IO 666 if (flags & USB_USER_DATA_PTR) { 667 USB_XFER_UNLOCK(xfer); 668 err = usbd_copy_out_user(xfer->frbuffers + 1, 669 0, data, temp); 670 USB_XFER_LOCK(xfer); 671 if (err) { 672 err = USB_ERR_INVAL; 673 break; 674 } 675 } else 676#endif 677 usbd_copy_out(xfer->frbuffers + 1, 678 0, data, temp); 679 } 680 } 681 /* 682 * Clear "frlengths[0]" so that we don't send the setup 683 * packet again: 684 */ 685 usbd_xfer_set_frame_len(xfer, 0, 0); 686 687 /* update length and data pointer */ 688 length -= temp; 689 data = USB_ADD_BYTES(data, temp); 690 691 if (actlen) { 692 (*actlen) += temp; 693 } 694 /* check for timeout */ 695 696 delta_ticks = ticks - start_ticks; 697 if (delta_ticks > max_ticks) { 698 if (!err) { 699 err = USB_ERR_TIMEOUT; 700 } 701 } 702 if (err) { 703 break; 704 } 705 } 706 707 if (err) { 708 /* 709 * Make sure that the control endpoint is no longer 710 * blocked in case of a non-transfer related error: 711 */ 712 usbd_transfer_stop(xfer); 713 } 714 USB_XFER_UNLOCK(xfer); 715 716done: 717 usbd_sr_lock(udev); 718 719 if (do_unlock) 720 usbd_enum_unlock(udev); 721 722 if ((mtx != NULL) && (mtx != &Giant)) 723 mtx_lock(mtx); 724 725 return ((usb_error_t)err); 726} 727 728/*------------------------------------------------------------------------* 729 * usbd_do_request_proc - factored out code 730 * 731 * This function is factored out code. It does basically the same like 732 * usbd_do_request_flags, except it will check the status of the 733 * passed process argument before doing the USB request. If the 734 * process is draining the USB_ERR_IOERROR code will be returned. It 735 * is assumed that the mutex associated with the process is locked 736 * when calling this function. 737 *------------------------------------------------------------------------*/ 738usb_error_t 739usbd_do_request_proc(struct usb_device *udev, struct usb_process *pproc, 740 struct usb_device_request *req, void *data, uint16_t flags, 741 uint16_t *actlen, usb_timeout_t timeout) 742{ 743 usb_error_t err; 744 uint16_t len; 745 746 /* get request data length */ 747 len = UGETW(req->wLength); 748 749 /* check if the device is being detached */ 750 if (usb_proc_is_gone(pproc)) { 751 err = USB_ERR_IOERROR; 752 goto done; 753 } 754 755 /* forward the USB request */ 756 err = usbd_do_request_flags(udev, pproc->up_mtx, 757 req, data, flags, actlen, timeout); 758 759done: 760 /* on failure we zero the data */ 761 /* on short packet we zero the unused data */ 762 if ((len != 0) && (req->bmRequestType & UE_DIR_IN)) { 763 if (err) 764 memset(data, 0, len); 765 else if (actlen && *actlen != len) 766 memset(((uint8_t *)data) + *actlen, 0, len - *actlen); 767 } 768 return (err); 769} 770 771/*------------------------------------------------------------------------* 772 * usbd_req_reset_port 773 * 774 * This function will instruct a USB HUB to perform a reset sequence 775 * on the specified port number. 776 * 777 * Returns: 778 * 0: Success. The USB device should now be at address zero. 779 * Else: Failure. No USB device is present and the USB port should be 780 * disabled. 781 *------------------------------------------------------------------------*/ 782usb_error_t 783usbd_req_reset_port(struct usb_device *udev, struct mtx *mtx, uint8_t port) 784{ 785 struct usb_port_status ps; 786 usb_error_t err; 787 uint16_t n; 788 uint16_t status; 789 uint16_t change; 790 791 DPRINTF("\n"); 792 793 /* clear any leftover port reset changes first */ 794 usbd_req_clear_port_feature( 795 udev, mtx, port, UHF_C_PORT_RESET); 796 797 /* assert port reset on the given port */ 798 err = usbd_req_set_port_feature( 799 udev, mtx, port, UHF_PORT_RESET); 800 801 /* check for errors */ 802 if (err) 803 goto done; 804 n = 0; 805 while (1) { 806 /* wait for the device to recover from reset */ 807 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_delay)); 808 n += usb_port_reset_delay; 809 err = usbd_req_get_port_status(udev, mtx, &ps, port); 810 if (err) 811 goto done; 812 813 status = UGETW(ps.wPortStatus); 814 change = UGETW(ps.wPortChange); 815 816 /* if the device disappeared, just give up */ 817 if (!(status & UPS_CURRENT_CONNECT_STATUS)) 818 goto done; 819 820 /* check if reset is complete */ 821 if (change & UPS_C_PORT_RESET) 822 break; 823 824 /* 825 * Some Virtual Machines like VirtualBox 4.x fail to 826 * generate a port reset change event. Check if reset 827 * is no longer asserted. 828 */ 829 if (!(status & UPS_RESET)) 830 break; 831 832 /* check for timeout */ 833 if (n > 1000) { 834 n = 0; 835 break; 836 } 837 } 838 839 /* clear port reset first */ 840 err = usbd_req_clear_port_feature( 841 udev, mtx, port, UHF_C_PORT_RESET); 842 if (err) 843 goto done; 844 845 /* check for timeout */ 846 if (n == 0) { 847 err = USB_ERR_TIMEOUT; 848 goto done; 849 } 850 /* wait for the device to recover from reset */ 851 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_recovery)); 852 853done: 854 DPRINTFN(2, "port %d reset returning error=%s\n", 855 port, usbd_errstr(err)); 856 return (err); 857} 858 859/*------------------------------------------------------------------------* 860 * usbd_req_warm_reset_port 861 * 862 * This function will instruct an USB HUB to perform a warm reset 863 * sequence on the specified port number. This kind of reset is not 864 * mandatory for LOW-, FULL- and HIGH-speed USB HUBs and is targeted 865 * for SUPER-speed USB HUBs. 866 * 867 * Returns: 868 * 0: Success. The USB device should now be available again. 869 * Else: Failure. No USB device is present and the USB port should be 870 * disabled. 871 *------------------------------------------------------------------------*/ 872usb_error_t 873usbd_req_warm_reset_port(struct usb_device *udev, struct mtx *mtx, 874 uint8_t port) 875{ 876 struct usb_port_status ps; 877 usb_error_t err; 878 uint16_t n; 879 uint16_t status; 880 uint16_t change; 881 882 DPRINTF("\n"); 883 884 err = usbd_req_get_port_status(udev, mtx, &ps, port); 885 if (err) 886 goto done; 887 888 status = UGETW(ps.wPortStatus); 889 890 switch (UPS_PORT_LINK_STATE_GET(status)) { 891 case UPS_PORT_LS_U3: 892 case UPS_PORT_LS_COMP_MODE: 893 case UPS_PORT_LS_LOOPBACK: 894 case UPS_PORT_LS_SS_INA: 895 break; 896 default: 897 DPRINTF("Wrong state for warm reset\n"); 898 return (0); 899 } 900 901 /* clear any leftover warm port reset changes first */ 902 usbd_req_clear_port_feature(udev, mtx, 903 port, UHF_C_BH_PORT_RESET); 904 905 /* set warm port reset */ 906 err = usbd_req_set_port_feature(udev, mtx, 907 port, UHF_BH_PORT_RESET); 908 if (err) 909 goto done; 910 911 n = 0; 912 while (1) { 913 /* wait for the device to recover from reset */ 914 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_delay)); 915 n += usb_port_reset_delay; 916 err = usbd_req_get_port_status(udev, mtx, &ps, port); 917 if (err) 918 goto done; 919 920 status = UGETW(ps.wPortStatus); 921 change = UGETW(ps.wPortChange); 922 923 /* if the device disappeared, just give up */ 924 if (!(status & UPS_CURRENT_CONNECT_STATUS)) 925 goto done; 926 927 /* check if reset is complete */ 928 if (change & UPS_C_BH_PORT_RESET) 929 break; 930 931 /* check for timeout */ 932 if (n > 1000) { 933 n = 0; 934 break; 935 } 936 } 937 938 /* clear port reset first */ 939 err = usbd_req_clear_port_feature( 940 udev, mtx, port, UHF_C_BH_PORT_RESET); 941 if (err) 942 goto done; 943 944 /* check for timeout */ 945 if (n == 0) { 946 err = USB_ERR_TIMEOUT; 947 goto done; 948 } 949 /* wait for the device to recover from reset */ 950 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_recovery)); 951 952done: 953 DPRINTFN(2, "port %d warm reset returning error=%s\n", 954 port, usbd_errstr(err)); 955 return (err); 956} 957 958/*------------------------------------------------------------------------* 959 * usbd_req_get_desc 960 * 961 * This function can be used to retrieve USB descriptors. It contains 962 * some additional logic like zeroing of missing descriptor bytes and 963 * retrying an USB descriptor in case of failure. The "min_len" 964 * argument specifies the minimum descriptor length. The "max_len" 965 * argument specifies the maximum descriptor length. If the real 966 * descriptor length is less than the minimum length the missing 967 * byte(s) will be zeroed. The type field, the second byte of the USB 968 * descriptor, will get forced to the correct type. If the "actlen" 969 * pointer is non-NULL, the actual length of the transfer will get 970 * stored in the 16-bit unsigned integer which it is pointing to. The 971 * first byte of the descriptor will not get updated. If the "actlen" 972 * pointer is NULL the first byte of the descriptor will get updated 973 * to reflect the actual length instead. If "min_len" is not equal to 974 * "max_len" then this function will try to retrive the beginning of 975 * the descriptor and base the maximum length on the first byte of the 976 * descriptor. 977 * 978 * Returns: 979 * 0: Success 980 * Else: Failure 981 *------------------------------------------------------------------------*/ 982usb_error_t 983usbd_req_get_desc(struct usb_device *udev, 984 struct mtx *mtx, uint16_t *actlen, void *desc, 985 uint16_t min_len, uint16_t max_len, 986 uint16_t id, uint8_t type, uint8_t index, 987 uint8_t retries) 988{ 989 struct usb_device_request req; 990 uint8_t *buf; 991 usb_error_t err; 992 993 DPRINTFN(4, "id=%d, type=%d, index=%d, max_len=%d\n", 994 id, type, index, max_len); 995 996 req.bmRequestType = UT_READ_DEVICE; 997 req.bRequest = UR_GET_DESCRIPTOR; 998 USETW2(req.wValue, type, index); 999 USETW(req.wIndex, id); 1000 1001 while (1) { 1002 1003 if ((min_len < 2) || (max_len < 2)) { 1004 err = USB_ERR_INVAL; 1005 goto done; 1006 } 1007 USETW(req.wLength, min_len); 1008 1009 err = usbd_do_request_flags(udev, mtx, &req, 1010 desc, 0, NULL, 500 /* ms */); 1011 1012 if (err) { 1013 if (!retries) { 1014 goto done; 1015 } 1016 retries--; 1017 1018 usb_pause_mtx(mtx, hz / 5); 1019 1020 continue; 1021 } 1022 buf = desc; 1023 1024 if (min_len == max_len) { 1025 1026 /* enforce correct length */ 1027 if ((buf[0] > min_len) && (actlen == NULL)) 1028 buf[0] = min_len; 1029 1030 /* enforce correct type */ 1031 buf[1] = type; 1032 1033 goto done; 1034 } 1035 /* range check */ 1036 1037 if (max_len > buf[0]) { 1038 max_len = buf[0]; 1039 } 1040 /* zero minimum data */ 1041 1042 while (min_len > max_len) { 1043 min_len--; 1044 buf[min_len] = 0; 1045 } 1046 1047 /* set new minimum length */ 1048 1049 min_len = max_len; 1050 } 1051done: 1052 if (actlen != NULL) { 1053 if (err) 1054 *actlen = 0; 1055 else 1056 *actlen = min_len; 1057 } 1058 return (err); 1059} 1060 1061/*------------------------------------------------------------------------* 1062 * usbd_req_get_string_any 1063 * 1064 * This function will return the string given by "string_index" 1065 * using the first language ID. The maximum length "len" includes 1066 * the terminating zero. The "len" argument should be twice as 1067 * big pluss 2 bytes, compared with the actual maximum string length ! 1068 * 1069 * Returns: 1070 * 0: Success 1071 * Else: Failure 1072 *------------------------------------------------------------------------*/ 1073usb_error_t 1074usbd_req_get_string_any(struct usb_device *udev, struct mtx *mtx, char *buf, 1075 uint16_t len, uint8_t string_index) 1076{ 1077 char *s; 1078 uint8_t *temp; 1079 uint16_t i; 1080 uint16_t n; 1081 uint16_t c; 1082 uint8_t swap; 1083 usb_error_t err; 1084 1085 if (len == 0) { 1086 /* should not happen */ 1087 return (USB_ERR_NORMAL_COMPLETION); 1088 } 1089 if (string_index == 0) { 1090 /* this is the language table */ 1091 buf[0] = 0; 1092 return (USB_ERR_INVAL); 1093 } 1094 if (udev->flags.no_strings) { 1095 buf[0] = 0; 1096 return (USB_ERR_STALLED); 1097 } 1098 err = usbd_req_get_string_desc 1099 (udev, mtx, buf, len, udev->langid, string_index); 1100 if (err) { 1101 buf[0] = 0; 1102 return (err); 1103 } 1104 temp = (uint8_t *)buf; 1105 1106 if (temp[0] < 2) { 1107 /* string length is too short */ 1108 buf[0] = 0; 1109 return (USB_ERR_INVAL); 1110 } 1111 /* reserve one byte for terminating zero */ 1112 len--; 1113 1114 /* find maximum length */ 1115 s = buf; 1116 n = (temp[0] / 2) - 1; 1117 if (n > len) { 1118 n = len; 1119 } 1120 /* skip descriptor header */ 1121 temp += 2; 1122 1123 /* reset swap state */ 1124 swap = 3; 1125 1126 /* convert and filter */ 1127 for (i = 0; (i != n); i++) { 1128 c = UGETW(temp + (2 * i)); 1129 1130 /* convert from Unicode, handle buggy strings */ 1131 if (((c & 0xff00) == 0) && (swap & 1)) { 1132 /* Little Endian, default */ 1133 *s = c; 1134 swap = 1; 1135 } else if (((c & 0x00ff) == 0) && (swap & 2)) { 1136 /* Big Endian */ 1137 *s = c >> 8; 1138 swap = 2; 1139 } else { 1140 /* silently skip bad character */ 1141 continue; 1142 } 1143 1144 /* 1145 * Filter by default - We only allow alphanumerical 1146 * and a few more to avoid any problems with scripts 1147 * and daemons. 1148 */ 1149 if (isalpha(*s) || 1150 isdigit(*s) || 1151 *s == '-' || 1152 *s == '+' || 1153 *s == ' ' || 1154 *s == '.' || 1155 *s == ',') { 1156 /* allowed */ 1157 s++; 1158 } 1159 /* silently skip bad character */ 1160 } 1161 *s = 0; /* zero terminate resulting string */ 1162 return (USB_ERR_NORMAL_COMPLETION); 1163} 1164 1165/*------------------------------------------------------------------------* 1166 * usbd_req_get_string_desc 1167 * 1168 * If you don't know the language ID, consider using 1169 * "usbd_req_get_string_any()". 1170 * 1171 * Returns: 1172 * 0: Success 1173 * Else: Failure 1174 *------------------------------------------------------------------------*/ 1175usb_error_t 1176usbd_req_get_string_desc(struct usb_device *udev, struct mtx *mtx, void *sdesc, 1177 uint16_t max_len, uint16_t lang_id, 1178 uint8_t string_index) 1179{ 1180 return (usbd_req_get_desc(udev, mtx, NULL, sdesc, 2, max_len, lang_id, 1181 UDESC_STRING, string_index, 0)); 1182} 1183 1184/*------------------------------------------------------------------------* 1185 * usbd_req_get_config_desc_ptr 1186 * 1187 * This function is used in device side mode to retrieve the pointer 1188 * to the generated config descriptor. This saves allocating space for 1189 * an additional config descriptor when setting the configuration. 1190 * 1191 * Returns: 1192 * 0: Success 1193 * Else: Failure 1194 *------------------------------------------------------------------------*/ 1195usb_error_t 1196usbd_req_get_descriptor_ptr(struct usb_device *udev, 1197 struct usb_config_descriptor **ppcd, uint16_t wValue) 1198{ 1199 struct usb_device_request req; 1200 usb_handle_req_t *hr_func; 1201 const void *ptr; 1202 uint16_t len; 1203 usb_error_t err; 1204 1205 req.bmRequestType = UT_READ_DEVICE; 1206 req.bRequest = UR_GET_DESCRIPTOR; 1207 USETW(req.wValue, wValue); 1208 USETW(req.wIndex, 0); 1209 USETW(req.wLength, 0); 1210 1211 ptr = NULL; 1212 len = 0; 1213 1214 hr_func = usbd_get_hr_func(udev); 1215 1216 if (hr_func == NULL) 1217 err = USB_ERR_INVAL; 1218 else { 1219 USB_BUS_LOCK(udev->bus); 1220 err = (hr_func) (udev, &req, &ptr, &len); 1221 USB_BUS_UNLOCK(udev->bus); 1222 } 1223 1224 if (err) 1225 ptr = NULL; 1226 else if (ptr == NULL) 1227 err = USB_ERR_INVAL; 1228 1229 *ppcd = __DECONST(struct usb_config_descriptor *, ptr); 1230 1231 return (err); 1232} 1233 1234/*------------------------------------------------------------------------* 1235 * usbd_req_get_config_desc 1236 * 1237 * Returns: 1238 * 0: Success 1239 * Else: Failure 1240 *------------------------------------------------------------------------*/ 1241usb_error_t 1242usbd_req_get_config_desc(struct usb_device *udev, struct mtx *mtx, 1243 struct usb_config_descriptor *d, uint8_t conf_index) 1244{ 1245 usb_error_t err; 1246 1247 DPRINTFN(4, "confidx=%d\n", conf_index); 1248 1249 err = usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), 1250 sizeof(*d), 0, UDESC_CONFIG, conf_index, 0); 1251 if (err) { 1252 goto done; 1253 } 1254 /* Extra sanity checking */ 1255 if (UGETW(d->wTotalLength) < (uint16_t)sizeof(*d)) { 1256 err = USB_ERR_INVAL; 1257 } 1258done: 1259 return (err); 1260} 1261 1262/*------------------------------------------------------------------------* 1263 * usbd_req_get_config_desc_full 1264 * 1265 * This function gets the complete USB configuration descriptor and 1266 * ensures that "wTotalLength" is correct. 1267 * 1268 * Returns: 1269 * 0: Success 1270 * Else: Failure 1271 *------------------------------------------------------------------------*/ 1272usb_error_t 1273usbd_req_get_config_desc_full(struct usb_device *udev, struct mtx *mtx, 1274 struct usb_config_descriptor **ppcd, struct malloc_type *mtype, 1275 uint8_t index) 1276{ 1277 struct usb_config_descriptor cd; 1278 struct usb_config_descriptor *cdesc; 1279 uint32_t len; 1280 usb_error_t err; 1281 1282 DPRINTFN(4, "index=%d\n", index); 1283 1284 *ppcd = NULL; 1285 1286 err = usbd_req_get_config_desc(udev, mtx, &cd, index); 1287 if (err) 1288 return (err); 1289 1290 /* get full descriptor */ 1291 len = UGETW(cd.wTotalLength); 1292 if (len < (uint32_t)sizeof(*cdesc)) { 1293 /* corrupt descriptor */ 1294 return (USB_ERR_INVAL); 1295 } else if (len > USB_CONFIG_MAX) { 1296 DPRINTF("Configuration descriptor was truncated\n"); 1297 len = USB_CONFIG_MAX; 1298 } 1299 cdesc = malloc(len, mtype, M_WAITOK); 1300 if (cdesc == NULL) 1301 return (USB_ERR_NOMEM); 1302 err = usbd_req_get_desc(udev, mtx, NULL, cdesc, len, len, 0, 1303 UDESC_CONFIG, index, 3); 1304 if (err) { 1305 free(cdesc, mtype); 1306 return (err); 1307 } 1308 /* make sure that the device is not fooling us: */ 1309 USETW(cdesc->wTotalLength, len); 1310 1311 *ppcd = cdesc; 1312 1313 return (0); /* success */ 1314} 1315 1316/*------------------------------------------------------------------------* 1317 * usbd_req_get_device_desc 1318 * 1319 * Returns: 1320 * 0: Success 1321 * Else: Failure 1322 *------------------------------------------------------------------------*/ 1323usb_error_t 1324usbd_req_get_device_desc(struct usb_device *udev, struct mtx *mtx, 1325 struct usb_device_descriptor *d) 1326{ 1327 DPRINTFN(4, "\n"); 1328 return (usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), 1329 sizeof(*d), 0, UDESC_DEVICE, 0, 3)); 1330} 1331 1332/*------------------------------------------------------------------------* 1333 * usbd_req_get_alt_interface_no 1334 * 1335 * Returns: 1336 * 0: Success 1337 * Else: Failure 1338 *------------------------------------------------------------------------*/ 1339usb_error_t 1340usbd_req_get_alt_interface_no(struct usb_device *udev, struct mtx *mtx, 1341 uint8_t *alt_iface_no, uint8_t iface_index) 1342{ 1343 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1344 struct usb_device_request req; 1345 1346 if ((iface == NULL) || (iface->idesc == NULL)) 1347 return (USB_ERR_INVAL); 1348 1349 req.bmRequestType = UT_READ_INTERFACE; 1350 req.bRequest = UR_GET_INTERFACE; 1351 USETW(req.wValue, 0); 1352 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1353 req.wIndex[1] = 0; 1354 USETW(req.wLength, 1); 1355 return (usbd_do_request(udev, mtx, &req, alt_iface_no)); 1356} 1357 1358/*------------------------------------------------------------------------* 1359 * usbd_req_set_alt_interface_no 1360 * 1361 * Returns: 1362 * 0: Success 1363 * Else: Failure 1364 *------------------------------------------------------------------------*/ 1365usb_error_t 1366usbd_req_set_alt_interface_no(struct usb_device *udev, struct mtx *mtx, 1367 uint8_t iface_index, uint8_t alt_no) 1368{ 1369 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1370 struct usb_device_request req; 1371 1372 if ((iface == NULL) || (iface->idesc == NULL)) 1373 return (USB_ERR_INVAL); 1374 1375 req.bmRequestType = UT_WRITE_INTERFACE; 1376 req.bRequest = UR_SET_INTERFACE; 1377 req.wValue[0] = alt_no; 1378 req.wValue[1] = 0; 1379 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1380 req.wIndex[1] = 0; 1381 USETW(req.wLength, 0); 1382 return (usbd_do_request(udev, mtx, &req, 0)); 1383} 1384 1385/*------------------------------------------------------------------------* 1386 * usbd_req_get_device_status 1387 * 1388 * Returns: 1389 * 0: Success 1390 * Else: Failure 1391 *------------------------------------------------------------------------*/ 1392usb_error_t 1393usbd_req_get_device_status(struct usb_device *udev, struct mtx *mtx, 1394 struct usb_status *st) 1395{ 1396 struct usb_device_request req; 1397 1398 req.bmRequestType = UT_READ_DEVICE; 1399 req.bRequest = UR_GET_STATUS; 1400 USETW(req.wValue, 0); 1401 USETW(req.wIndex, 0); 1402 USETW(req.wLength, sizeof(*st)); 1403 return (usbd_do_request(udev, mtx, &req, st)); 1404} 1405 1406/*------------------------------------------------------------------------* 1407 * usbd_req_get_hub_descriptor 1408 * 1409 * Returns: 1410 * 0: Success 1411 * Else: Failure 1412 *------------------------------------------------------------------------*/ 1413usb_error_t 1414usbd_req_get_hub_descriptor(struct usb_device *udev, struct mtx *mtx, 1415 struct usb_hub_descriptor *hd, uint8_t nports) 1416{ 1417 struct usb_device_request req; 1418 uint16_t len = (nports + 7 + (8 * 8)) / 8; 1419 1420 req.bmRequestType = UT_READ_CLASS_DEVICE; 1421 req.bRequest = UR_GET_DESCRIPTOR; 1422 USETW2(req.wValue, UDESC_HUB, 0); 1423 USETW(req.wIndex, 0); 1424 USETW(req.wLength, len); 1425 return (usbd_do_request(udev, mtx, &req, hd)); 1426} 1427 1428/*------------------------------------------------------------------------* 1429 * usbd_req_get_ss_hub_descriptor 1430 * 1431 * Returns: 1432 * 0: Success 1433 * Else: Failure 1434 *------------------------------------------------------------------------*/ 1435usb_error_t 1436usbd_req_get_ss_hub_descriptor(struct usb_device *udev, struct mtx *mtx, 1437 struct usb_hub_ss_descriptor *hd, uint8_t nports) 1438{ 1439 struct usb_device_request req; 1440 uint16_t len = sizeof(*hd) - 32 + 1 + ((nports + 7) / 8); 1441 1442 req.bmRequestType = UT_READ_CLASS_DEVICE; 1443 req.bRequest = UR_GET_DESCRIPTOR; 1444 USETW2(req.wValue, UDESC_SS_HUB, 0); 1445 USETW(req.wIndex, 0); 1446 USETW(req.wLength, len); 1447 return (usbd_do_request(udev, mtx, &req, hd)); 1448} 1449 1450/*------------------------------------------------------------------------* 1451 * usbd_req_get_hub_status 1452 * 1453 * Returns: 1454 * 0: Success 1455 * Else: Failure 1456 *------------------------------------------------------------------------*/ 1457usb_error_t 1458usbd_req_get_hub_status(struct usb_device *udev, struct mtx *mtx, 1459 struct usb_hub_status *st) 1460{ 1461 struct usb_device_request req; 1462 1463 req.bmRequestType = UT_READ_CLASS_DEVICE; 1464 req.bRequest = UR_GET_STATUS; 1465 USETW(req.wValue, 0); 1466 USETW(req.wIndex, 0); 1467 USETW(req.wLength, sizeof(struct usb_hub_status)); 1468 return (usbd_do_request(udev, mtx, &req, st)); 1469} 1470 1471/*------------------------------------------------------------------------* 1472 * usbd_req_set_address 1473 * 1474 * This function is used to set the address for an USB device. After 1475 * port reset the USB device will respond at address zero. 1476 * 1477 * Returns: 1478 * 0: Success 1479 * Else: Failure 1480 *------------------------------------------------------------------------*/ 1481usb_error_t 1482usbd_req_set_address(struct usb_device *udev, struct mtx *mtx, uint16_t addr) 1483{ 1484 struct usb_device_request req; 1485 usb_error_t err; 1486 1487 DPRINTFN(6, "setting device address=%d\n", addr); 1488 1489 req.bmRequestType = UT_WRITE_DEVICE; 1490 req.bRequest = UR_SET_ADDRESS; 1491 USETW(req.wValue, addr); 1492 USETW(req.wIndex, 0); 1493 USETW(req.wLength, 0); 1494 1495 err = USB_ERR_INVAL; 1496 1497 /* check if USB controller handles set address */ 1498 if (udev->bus->methods->set_address != NULL) 1499 err = (udev->bus->methods->set_address) (udev, mtx, addr); 1500 1501 if (err != USB_ERR_INVAL) 1502 goto done; 1503 1504 /* Setting the address should not take more than 1 second ! */ 1505 err = usbd_do_request_flags(udev, mtx, &req, NULL, 1506 USB_DELAY_STATUS_STAGE, NULL, 1000); 1507 1508done: 1509 /* allow device time to set new address */ 1510 usb_pause_mtx(mtx, 1511 USB_MS_TO_TICKS(usb_set_address_settle)); 1512 1513 return (err); 1514} 1515 1516/*------------------------------------------------------------------------* 1517 * usbd_req_get_port_status 1518 * 1519 * Returns: 1520 * 0: Success 1521 * Else: Failure 1522 *------------------------------------------------------------------------*/ 1523usb_error_t 1524usbd_req_get_port_status(struct usb_device *udev, struct mtx *mtx, 1525 struct usb_port_status *ps, uint8_t port) 1526{ 1527 struct usb_device_request req; 1528 1529 req.bmRequestType = UT_READ_CLASS_OTHER; 1530 req.bRequest = UR_GET_STATUS; 1531 USETW(req.wValue, 0); 1532 req.wIndex[0] = port; 1533 req.wIndex[1] = 0; 1534 USETW(req.wLength, sizeof *ps); 1535 return (usbd_do_request(udev, mtx, &req, ps)); 1536} 1537 1538/*------------------------------------------------------------------------* 1539 * usbd_req_clear_hub_feature 1540 * 1541 * Returns: 1542 * 0: Success 1543 * Else: Failure 1544 *------------------------------------------------------------------------*/ 1545usb_error_t 1546usbd_req_clear_hub_feature(struct usb_device *udev, struct mtx *mtx, 1547 uint16_t sel) 1548{ 1549 struct usb_device_request req; 1550 1551 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1552 req.bRequest = UR_CLEAR_FEATURE; 1553 USETW(req.wValue, sel); 1554 USETW(req.wIndex, 0); 1555 USETW(req.wLength, 0); 1556 return (usbd_do_request(udev, mtx, &req, 0)); 1557} 1558 1559/*------------------------------------------------------------------------* 1560 * usbd_req_set_hub_feature 1561 * 1562 * Returns: 1563 * 0: Success 1564 * Else: Failure 1565 *------------------------------------------------------------------------*/ 1566usb_error_t 1567usbd_req_set_hub_feature(struct usb_device *udev, struct mtx *mtx, 1568 uint16_t sel) 1569{ 1570 struct usb_device_request req; 1571 1572 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1573 req.bRequest = UR_SET_FEATURE; 1574 USETW(req.wValue, sel); 1575 USETW(req.wIndex, 0); 1576 USETW(req.wLength, 0); 1577 return (usbd_do_request(udev, mtx, &req, 0)); 1578} 1579 1580/*------------------------------------------------------------------------* 1581 * usbd_req_set_hub_u1_timeout 1582 * 1583 * Returns: 1584 * 0: Success 1585 * Else: Failure 1586 *------------------------------------------------------------------------*/ 1587usb_error_t 1588usbd_req_set_hub_u1_timeout(struct usb_device *udev, struct mtx *mtx, 1589 uint8_t port, uint8_t timeout) 1590{ 1591 struct usb_device_request req; 1592 1593 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1594 req.bRequest = UR_SET_FEATURE; 1595 USETW(req.wValue, UHF_PORT_U1_TIMEOUT); 1596 req.wIndex[0] = port; 1597 req.wIndex[1] = timeout; 1598 USETW(req.wLength, 0); 1599 return (usbd_do_request(udev, mtx, &req, 0)); 1600} 1601 1602/*------------------------------------------------------------------------* 1603 * usbd_req_set_hub_u2_timeout 1604 * 1605 * Returns: 1606 * 0: Success 1607 * Else: Failure 1608 *------------------------------------------------------------------------*/ 1609usb_error_t 1610usbd_req_set_hub_u2_timeout(struct usb_device *udev, struct mtx *mtx, 1611 uint8_t port, uint8_t timeout) 1612{ 1613 struct usb_device_request req; 1614 1615 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1616 req.bRequest = UR_SET_FEATURE; 1617 USETW(req.wValue, UHF_PORT_U2_TIMEOUT); 1618 req.wIndex[0] = port; 1619 req.wIndex[1] = timeout; 1620 USETW(req.wLength, 0); 1621 return (usbd_do_request(udev, mtx, &req, 0)); 1622} 1623 1624/*------------------------------------------------------------------------* 1625 * usbd_req_set_hub_depth 1626 * 1627 * Returns: 1628 * 0: Success 1629 * Else: Failure 1630 *------------------------------------------------------------------------*/ 1631usb_error_t 1632usbd_req_set_hub_depth(struct usb_device *udev, struct mtx *mtx, 1633 uint16_t depth) 1634{ 1635 struct usb_device_request req; 1636 1637 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1638 req.bRequest = UR_SET_HUB_DEPTH; 1639 USETW(req.wValue, depth); 1640 USETW(req.wIndex, 0); 1641 USETW(req.wLength, 0); 1642 return (usbd_do_request(udev, mtx, &req, 0)); 1643} 1644 1645/*------------------------------------------------------------------------* 1646 * usbd_req_clear_port_feature 1647 * 1648 * Returns: 1649 * 0: Success 1650 * Else: Failure 1651 *------------------------------------------------------------------------*/ 1652usb_error_t 1653usbd_req_clear_port_feature(struct usb_device *udev, struct mtx *mtx, 1654 uint8_t port, uint16_t sel) 1655{ 1656 struct usb_device_request req; 1657 1658 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1659 req.bRequest = UR_CLEAR_FEATURE; 1660 USETW(req.wValue, sel); 1661 req.wIndex[0] = port; 1662 req.wIndex[1] = 0; 1663 USETW(req.wLength, 0); 1664 return (usbd_do_request(udev, mtx, &req, 0)); 1665} 1666 1667/*------------------------------------------------------------------------* 1668 * usbd_req_set_port_feature 1669 * 1670 * Returns: 1671 * 0: Success 1672 * Else: Failure 1673 *------------------------------------------------------------------------*/ 1674usb_error_t 1675usbd_req_set_port_feature(struct usb_device *udev, struct mtx *mtx, 1676 uint8_t port, uint16_t sel) 1677{ 1678 struct usb_device_request req; 1679 1680 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1681 req.bRequest = UR_SET_FEATURE; 1682 USETW(req.wValue, sel); 1683 req.wIndex[0] = port; 1684 req.wIndex[1] = 0; 1685 USETW(req.wLength, 0); 1686 return (usbd_do_request(udev, mtx, &req, 0)); 1687} 1688 1689/*------------------------------------------------------------------------* 1690 * usbd_req_set_protocol 1691 * 1692 * Returns: 1693 * 0: Success 1694 * Else: Failure 1695 *------------------------------------------------------------------------*/ 1696usb_error_t 1697usbd_req_set_protocol(struct usb_device *udev, struct mtx *mtx, 1698 uint8_t iface_index, uint16_t report) 1699{ 1700 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1701 struct usb_device_request req; 1702 1703 if ((iface == NULL) || (iface->idesc == NULL)) { 1704 return (USB_ERR_INVAL); 1705 } 1706 DPRINTFN(5, "iface=%p, report=%d, endpt=%d\n", 1707 iface, report, iface->idesc->bInterfaceNumber); 1708 1709 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1710 req.bRequest = UR_SET_PROTOCOL; 1711 USETW(req.wValue, report); 1712 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1713 req.wIndex[1] = 0; 1714 USETW(req.wLength, 0); 1715 return (usbd_do_request(udev, mtx, &req, 0)); 1716} 1717 1718/*------------------------------------------------------------------------* 1719 * usbd_req_set_report 1720 * 1721 * Returns: 1722 * 0: Success 1723 * Else: Failure 1724 *------------------------------------------------------------------------*/ 1725usb_error_t 1726usbd_req_set_report(struct usb_device *udev, struct mtx *mtx, void *data, uint16_t len, 1727 uint8_t iface_index, uint8_t type, uint8_t id) 1728{ 1729 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1730 struct usb_device_request req; 1731 1732 if ((iface == NULL) || (iface->idesc == NULL)) { 1733 return (USB_ERR_INVAL); 1734 } 1735 DPRINTFN(5, "len=%d\n", len); 1736 1737 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1738 req.bRequest = UR_SET_REPORT; 1739 USETW2(req.wValue, type, id); 1740 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1741 req.wIndex[1] = 0; 1742 USETW(req.wLength, len); 1743 return (usbd_do_request(udev, mtx, &req, data)); 1744} 1745 1746/*------------------------------------------------------------------------* 1747 * usbd_req_get_report 1748 * 1749 * Returns: 1750 * 0: Success 1751 * Else: Failure 1752 *------------------------------------------------------------------------*/ 1753usb_error_t 1754usbd_req_get_report(struct usb_device *udev, struct mtx *mtx, void *data, 1755 uint16_t len, uint8_t iface_index, uint8_t type, uint8_t id) 1756{ 1757 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1758 struct usb_device_request req; 1759 1760 if ((iface == NULL) || (iface->idesc == NULL)) { 1761 return (USB_ERR_INVAL); 1762 } 1763 DPRINTFN(5, "len=%d\n", len); 1764 1765 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1766 req.bRequest = UR_GET_REPORT; 1767 USETW2(req.wValue, type, id); 1768 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1769 req.wIndex[1] = 0; 1770 USETW(req.wLength, len); 1771 return (usbd_do_request(udev, mtx, &req, data)); 1772} 1773 1774/*------------------------------------------------------------------------* 1775 * usbd_req_set_idle 1776 * 1777 * Returns: 1778 * 0: Success 1779 * Else: Failure 1780 *------------------------------------------------------------------------*/ 1781usb_error_t 1782usbd_req_set_idle(struct usb_device *udev, struct mtx *mtx, 1783 uint8_t iface_index, uint8_t duration, uint8_t id) 1784{ 1785 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1786 struct usb_device_request req; 1787 1788 if ((iface == NULL) || (iface->idesc == NULL)) { 1789 return (USB_ERR_INVAL); 1790 } 1791 DPRINTFN(5, "%d %d\n", duration, id); 1792 1793 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1794 req.bRequest = UR_SET_IDLE; 1795 USETW2(req.wValue, duration, id); 1796 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1797 req.wIndex[1] = 0; 1798 USETW(req.wLength, 0); 1799 return (usbd_do_request(udev, mtx, &req, 0)); 1800} 1801 1802/*------------------------------------------------------------------------* 1803 * usbd_req_get_report_descriptor 1804 * 1805 * Returns: 1806 * 0: Success 1807 * Else: Failure 1808 *------------------------------------------------------------------------*/ 1809usb_error_t 1810usbd_req_get_report_descriptor(struct usb_device *udev, struct mtx *mtx, 1811 void *d, uint16_t size, uint8_t iface_index) 1812{ 1813 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1814 struct usb_device_request req; 1815 1816 if ((iface == NULL) || (iface->idesc == NULL)) { 1817 return (USB_ERR_INVAL); 1818 } 1819 req.bmRequestType = UT_READ_INTERFACE; 1820 req.bRequest = UR_GET_DESCRIPTOR; 1821 USETW2(req.wValue, UDESC_REPORT, 0); /* report id should be 0 */ 1822 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1823 req.wIndex[1] = 0; 1824 USETW(req.wLength, size); 1825 return (usbd_do_request(udev, mtx, &req, d)); 1826} 1827 1828/*------------------------------------------------------------------------* 1829 * usbd_req_set_config 1830 * 1831 * This function is used to select the current configuration number in 1832 * both USB device side mode and USB host side mode. When setting the 1833 * configuration the function of the interfaces can change. 1834 * 1835 * Returns: 1836 * 0: Success 1837 * Else: Failure 1838 *------------------------------------------------------------------------*/ 1839usb_error_t 1840usbd_req_set_config(struct usb_device *udev, struct mtx *mtx, uint8_t conf) 1841{ 1842 struct usb_device_request req; 1843 1844 DPRINTF("setting config %d\n", conf); 1845 1846 /* do "set configuration" request */ 1847 1848 req.bmRequestType = UT_WRITE_DEVICE; 1849 req.bRequest = UR_SET_CONFIG; 1850 req.wValue[0] = conf; 1851 req.wValue[1] = 0; 1852 USETW(req.wIndex, 0); 1853 USETW(req.wLength, 0); 1854 return (usbd_do_request(udev, mtx, &req, 0)); 1855} 1856 1857/*------------------------------------------------------------------------* 1858 * usbd_req_get_config 1859 * 1860 * Returns: 1861 * 0: Success 1862 * Else: Failure 1863 *------------------------------------------------------------------------*/ 1864usb_error_t 1865usbd_req_get_config(struct usb_device *udev, struct mtx *mtx, uint8_t *pconf) 1866{ 1867 struct usb_device_request req; 1868 1869 req.bmRequestType = UT_READ_DEVICE; 1870 req.bRequest = UR_GET_CONFIG; 1871 USETW(req.wValue, 0); 1872 USETW(req.wIndex, 0); 1873 USETW(req.wLength, 1); 1874 return (usbd_do_request(udev, mtx, &req, pconf)); 1875} 1876 1877/*------------------------------------------------------------------------* 1878 * usbd_setup_device_desc 1879 *------------------------------------------------------------------------*/ 1880usb_error_t 1881usbd_setup_device_desc(struct usb_device *udev, struct mtx *mtx) 1882{ 1883 usb_error_t err; 1884 1885 /* 1886 * Get the first 8 bytes of the device descriptor ! 1887 * 1888 * NOTE: "usbd_do_request()" will check the device descriptor 1889 * next time we do a request to see if the maximum packet size 1890 * changed! The 8 first bytes of the device descriptor 1891 * contains the maximum packet size to use on control endpoint 1892 * 0. If this value is different from "USB_MAX_IPACKET" a new 1893 * USB control request will be setup! 1894 */ 1895 switch (udev->speed) { 1896 case USB_SPEED_FULL: 1897 if (usb_full_ddesc != 0) { 1898 /* get full device descriptor */ 1899 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1900 if (err == 0) 1901 break; 1902 } 1903 1904 /* get partial device descriptor, some devices crash on this */ 1905 err = usbd_req_get_desc(udev, mtx, NULL, &udev->ddesc, 1906 USB_MAX_IPACKET, USB_MAX_IPACKET, 0, UDESC_DEVICE, 0, 0); 1907 if (err != 0) 1908 break; 1909 1910 /* get the full device descriptor */ 1911 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1912 break; 1913 1914 default: 1915 DPRINTF("Minimum bMaxPacketSize is large enough " 1916 "to hold the complete device descriptor or " 1917 "only one bMaxPacketSize choice\n"); 1918 1919 /* get the full device descriptor */ 1920 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1921 1922 /* try one more time, if error */ 1923 if (err != 0) 1924 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1925 break; 1926 } 1927 1928 if (err != 0) { 1929 DPRINTFN(0, "getting device descriptor " 1930 "at addr %d failed, %s\n", udev->address, 1931 usbd_errstr(err)); 1932 return (err); 1933 } 1934 1935 DPRINTF("adding unit addr=%d, rev=%02x, class=%d, " 1936 "subclass=%d, protocol=%d, maxpacket=%d, len=%d, speed=%d\n", 1937 udev->address, UGETW(udev->ddesc.bcdUSB), 1938 udev->ddesc.bDeviceClass, 1939 udev->ddesc.bDeviceSubClass, 1940 udev->ddesc.bDeviceProtocol, 1941 udev->ddesc.bMaxPacketSize, 1942 udev->ddesc.bLength, 1943 udev->speed); 1944 1945 return (err); 1946} 1947 1948/*------------------------------------------------------------------------* 1949 * usbd_req_re_enumerate 1950 * 1951 * NOTE: After this function returns the hardware is in the 1952 * unconfigured state! The application is responsible for setting a 1953 * new configuration. 1954 * 1955 * Returns: 1956 * 0: Success 1957 * Else: Failure 1958 *------------------------------------------------------------------------*/ 1959usb_error_t 1960usbd_req_re_enumerate(struct usb_device *udev, struct mtx *mtx) 1961{ 1962 struct usb_device *parent_hub; 1963 usb_error_t err; 1964 uint8_t old_addr; 1965 uint8_t do_retry = 1; 1966 1967 if (udev->flags.usb_mode != USB_MODE_HOST) { 1968 return (USB_ERR_INVAL); 1969 } 1970 old_addr = udev->address; 1971 parent_hub = udev->parent_hub; 1972 if (parent_hub == NULL) { 1973 return (USB_ERR_INVAL); 1974 } 1975retry: 1976 /* 1977 * Try to reset the High Speed parent HUB of a LOW- or FULL- 1978 * speed device, if any. 1979 */ 1980 if (udev->parent_hs_hub != NULL && 1981 udev->speed != USB_SPEED_HIGH) { 1982 DPRINTF("Trying to reset parent High Speed TT.\n"); 1983 err = usbd_req_reset_tt(udev->parent_hs_hub, NULL, 1984 udev->hs_port_no); 1985 if (err) { 1986 DPRINTF("Resetting parent High " 1987 "Speed TT failed (%s).\n", 1988 usbd_errstr(err)); 1989 } 1990 } 1991 1992 /* Try to warm reset first */ 1993 if (parent_hub->speed == USB_SPEED_SUPER) 1994 usbd_req_warm_reset_port(parent_hub, mtx, udev->port_no); 1995 1996 /* Try to reset the parent HUB port. */ 1997 err = usbd_req_reset_port(parent_hub, mtx, udev->port_no); 1998 if (err) { 1999 DPRINTFN(0, "addr=%d, port reset failed, %s\n", 2000 old_addr, usbd_errstr(err)); 2001 goto done; 2002 } 2003 2004 /* 2005 * After that the port has been reset our device should be at 2006 * address zero: 2007 */ 2008 udev->address = USB_START_ADDR; 2009 2010 /* reset "bMaxPacketSize" */ 2011 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 2012 2013 /* reset USB state */ 2014 usb_set_device_state(udev, USB_STATE_POWERED); 2015 2016 /* 2017 * Restore device address: 2018 */ 2019 err = usbd_req_set_address(udev, mtx, old_addr); 2020 if (err) { 2021 /* XXX ignore any errors! */ 2022 DPRINTFN(0, "addr=%d, set address failed! (%s, ignored)\n", 2023 old_addr, usbd_errstr(err)); 2024 } 2025 /* 2026 * Restore device address, if the controller driver did not 2027 * set a new one: 2028 */ 2029 if (udev->address == USB_START_ADDR) 2030 udev->address = old_addr; 2031 2032 /* setup the device descriptor and the initial "wMaxPacketSize" */ 2033 err = usbd_setup_device_desc(udev, mtx); 2034 2035done: 2036 if (err && do_retry) { 2037 /* give the USB firmware some time to load */ 2038 usb_pause_mtx(mtx, hz / 2); 2039 /* no more retries after this retry */ 2040 do_retry = 0; 2041 /* try again */ 2042 goto retry; 2043 } 2044 /* restore address */ 2045 if (udev->address == USB_START_ADDR) 2046 udev->address = old_addr; 2047 /* update state, if successful */ 2048 if (err == 0) 2049 usb_set_device_state(udev, USB_STATE_ADDRESSED); 2050 return (err); 2051} 2052 2053/*------------------------------------------------------------------------* 2054 * usbd_req_clear_device_feature 2055 * 2056 * Returns: 2057 * 0: Success 2058 * Else: Failure 2059 *------------------------------------------------------------------------*/ 2060usb_error_t 2061usbd_req_clear_device_feature(struct usb_device *udev, struct mtx *mtx, 2062 uint16_t sel) 2063{ 2064 struct usb_device_request req; 2065 2066 req.bmRequestType = UT_WRITE_DEVICE; 2067 req.bRequest = UR_CLEAR_FEATURE; 2068 USETW(req.wValue, sel); 2069 USETW(req.wIndex, 0); 2070 USETW(req.wLength, 0); 2071 return (usbd_do_request(udev, mtx, &req, 0)); 2072} 2073 2074/*------------------------------------------------------------------------* 2075 * usbd_req_set_device_feature 2076 * 2077 * Returns: 2078 * 0: Success 2079 * Else: Failure 2080 *------------------------------------------------------------------------*/ 2081usb_error_t 2082usbd_req_set_device_feature(struct usb_device *udev, struct mtx *mtx, 2083 uint16_t sel) 2084{ 2085 struct usb_device_request req; 2086 2087 req.bmRequestType = UT_WRITE_DEVICE; 2088 req.bRequest = UR_SET_FEATURE; 2089 USETW(req.wValue, sel); 2090 USETW(req.wIndex, 0); 2091 USETW(req.wLength, 0); 2092 return (usbd_do_request(udev, mtx, &req, 0)); 2093} 2094 2095/*------------------------------------------------------------------------* 2096 * usbd_req_reset_tt 2097 * 2098 * Returns: 2099 * 0: Success 2100 * Else: Failure 2101 *------------------------------------------------------------------------*/ 2102usb_error_t 2103usbd_req_reset_tt(struct usb_device *udev, struct mtx *mtx, 2104 uint8_t port) 2105{ 2106 struct usb_device_request req; 2107 2108 /* For single TT HUBs the port should be 1 */ 2109 2110 if (udev->ddesc.bDeviceClass == UDCLASS_HUB && 2111 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) 2112 port = 1; 2113 2114 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2115 req.bRequest = UR_RESET_TT; 2116 USETW(req.wValue, 0); 2117 req.wIndex[0] = port; 2118 req.wIndex[1] = 0; 2119 USETW(req.wLength, 0); 2120 return (usbd_do_request(udev, mtx, &req, 0)); 2121} 2122 2123/*------------------------------------------------------------------------* 2124 * usbd_req_clear_tt_buffer 2125 * 2126 * For single TT HUBs the port should be 1. 2127 * 2128 * Returns: 2129 * 0: Success 2130 * Else: Failure 2131 *------------------------------------------------------------------------*/ 2132usb_error_t 2133usbd_req_clear_tt_buffer(struct usb_device *udev, struct mtx *mtx, 2134 uint8_t port, uint8_t addr, uint8_t type, uint8_t endpoint) 2135{ 2136 struct usb_device_request req; 2137 uint16_t wValue; 2138 2139 /* For single TT HUBs the port should be 1 */ 2140 2141 if (udev->ddesc.bDeviceClass == UDCLASS_HUB && 2142 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) 2143 port = 1; 2144 2145 wValue = (endpoint & 0xF) | ((addr & 0x7F) << 4) | 2146 ((endpoint & 0x80) << 8) | ((type & 3) << 12); 2147 2148 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2149 req.bRequest = UR_CLEAR_TT_BUFFER; 2150 USETW(req.wValue, wValue); 2151 req.wIndex[0] = port; 2152 req.wIndex[1] = 0; 2153 USETW(req.wLength, 0); 2154 return (usbd_do_request(udev, mtx, &req, 0)); 2155} 2156 2157/*------------------------------------------------------------------------* 2158 * usbd_req_set_port_link_state 2159 * 2160 * USB 3.0 specific request 2161 * 2162 * Returns: 2163 * 0: Success 2164 * Else: Failure 2165 *------------------------------------------------------------------------*/ 2166usb_error_t 2167usbd_req_set_port_link_state(struct usb_device *udev, struct mtx *mtx, 2168 uint8_t port, uint8_t link_state) 2169{ 2170 struct usb_device_request req; 2171 2172 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2173 req.bRequest = UR_SET_FEATURE; 2174 USETW(req.wValue, UHF_PORT_LINK_STATE); 2175 req.wIndex[0] = port; 2176 req.wIndex[1] = link_state; 2177 USETW(req.wLength, 0); 2178 return (usbd_do_request(udev, mtx, &req, 0)); 2179} 2180 2181/*------------------------------------------------------------------------* 2182 * usbd_req_set_lpm_info 2183 * 2184 * USB 2.0 specific request for Link Power Management. 2185 * 2186 * Returns: 2187 * 0: Success 2188 * USB_ERR_PENDING_REQUESTS: NYET 2189 * USB_ERR_TIMEOUT: TIMEOUT 2190 * USB_ERR_STALL: STALL 2191 * Else: Failure 2192 *------------------------------------------------------------------------*/ 2193usb_error_t 2194usbd_req_set_lpm_info(struct usb_device *udev, struct mtx *mtx, 2195 uint8_t port, uint8_t besl, uint8_t addr, uint8_t rwe) 2196{ 2197 struct usb_device_request req; 2198 usb_error_t err; 2199 uint8_t buf[1]; 2200 2201 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2202 req.bRequest = UR_SET_AND_TEST; 2203 USETW(req.wValue, UHF_PORT_L1); 2204 req.wIndex[0] = (port & 0xF) | ((besl & 0xF) << 4); 2205 req.wIndex[1] = (addr & 0x7F) | (rwe ? 0x80 : 0x00); 2206 USETW(req.wLength, sizeof(buf)); 2207 2208 /* set default value in case of short transfer */ 2209 buf[0] = 0x00; 2210 2211 err = usbd_do_request(udev, mtx, &req, buf); 2212 if (err) 2213 return (err); 2214 2215 switch (buf[0]) { 2216 case 0x00: /* SUCCESS */ 2217 break; 2218 case 0x10: /* NYET */ 2219 err = USB_ERR_PENDING_REQUESTS; 2220 break; 2221 case 0x11: /* TIMEOUT */ 2222 err = USB_ERR_TIMEOUT; 2223 break; 2224 case 0x30: /* STALL */ 2225 err = USB_ERR_STALLED; 2226 break; 2227 default: /* reserved */ 2228 err = USB_ERR_IOERROR; 2229 break; 2230 } 2231 return (err); 2232} 2233 2234