usb_request.c revision 214804
1/* $FreeBSD: head/sys/dev/usb/usb_request.c 214804 2010-11-04 19:24:21Z hselasky $ */ 2/*- 3 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 4 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 5 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29#include <sys/stdint.h> 30#include <sys/stddef.h> 31#include <sys/param.h> 32#include <sys/queue.h> 33#include <sys/types.h> 34#include <sys/systm.h> 35#include <sys/kernel.h> 36#include <sys/bus.h> 37#include <sys/linker_set.h> 38#include <sys/module.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/condvar.h> 42#include <sys/sysctl.h> 43#include <sys/sx.h> 44#include <sys/unistd.h> 45#include <sys/callout.h> 46#include <sys/malloc.h> 47#include <sys/priv.h> 48 49#include <dev/usb/usb.h> 50#include <dev/usb/usbdi.h> 51#include <dev/usb/usbdi_util.h> 52#include <dev/usb/usb_ioctl.h> 53#include <dev/usb/usbhid.h> 54 55#define USB_DEBUG_VAR usb_debug 56 57#include <dev/usb/usb_core.h> 58#include <dev/usb/usb_busdma.h> 59#include <dev/usb/usb_request.h> 60#include <dev/usb/usb_process.h> 61#include <dev/usb/usb_transfer.h> 62#include <dev/usb/usb_debug.h> 63#include <dev/usb/usb_device.h> 64#include <dev/usb/usb_util.h> 65#include <dev/usb/usb_dynamic.h> 66 67#include <dev/usb/usb_controller.h> 68#include <dev/usb/usb_bus.h> 69#include <sys/ctype.h> 70 71#ifdef USB_DEBUG 72static int usb_pr_poll_delay = USB_PORT_RESET_DELAY; 73static int usb_pr_recovery_delay = USB_PORT_RESET_RECOVERY; 74 75SYSCTL_INT(_hw_usb, OID_AUTO, pr_poll_delay, CTLFLAG_RW, 76 &usb_pr_poll_delay, 0, "USB port reset poll delay in ms"); 77SYSCTL_INT(_hw_usb, OID_AUTO, pr_recovery_delay, CTLFLAG_RW, 78 &usb_pr_recovery_delay, 0, "USB port reset recovery delay in ms"); 79 80#ifdef USB_REQ_DEBUG 81/* The following structures are used in connection to fault injection. */ 82struct usb_ctrl_debug { 83 int bus_index; /* target bus */ 84 int dev_index; /* target address */ 85 int ds_fail; /* fail data stage */ 86 int ss_fail; /* fail data stage */ 87 int ds_delay; /* data stage delay in ms */ 88 int ss_delay; /* status stage delay in ms */ 89 int bmRequestType_value; 90 int bRequest_value; 91}; 92 93struct usb_ctrl_debug_bits { 94 uint16_t ds_delay; 95 uint16_t ss_delay; 96 uint8_t ds_fail:1; 97 uint8_t ss_fail:1; 98 uint8_t enabled:1; 99}; 100 101/* The default is to disable fault injection. */ 102 103static struct usb_ctrl_debug usb_ctrl_debug = { 104 .bus_index = -1, 105 .dev_index = -1, 106 .bmRequestType_value = -1, 107 .bRequest_value = -1, 108}; 109 110SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_bus_fail, CTLFLAG_RW, 111 &usb_ctrl_debug.bus_index, 0, "USB controller index to fail"); 112SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_dev_fail, CTLFLAG_RW, 113 &usb_ctrl_debug.dev_index, 0, "USB device address to fail"); 114SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_fail, CTLFLAG_RW, 115 &usb_ctrl_debug.ds_fail, 0, "USB fail data stage"); 116SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_fail, CTLFLAG_RW, 117 &usb_ctrl_debug.ss_fail, 0, "USB fail status stage"); 118SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_delay, CTLFLAG_RW, 119 &usb_ctrl_debug.ds_delay, 0, "USB data stage delay in ms"); 120SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_delay, CTLFLAG_RW, 121 &usb_ctrl_debug.ss_delay, 0, "USB status stage delay in ms"); 122SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rt_fail, CTLFLAG_RW, 123 &usb_ctrl_debug.bmRequestType_value, 0, "USB bmRequestType to fail"); 124SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rv_fail, CTLFLAG_RW, 125 &usb_ctrl_debug.bRequest_value, 0, "USB bRequest to fail"); 126 127/*------------------------------------------------------------------------* 128 * usbd_get_debug_bits 129 * 130 * This function is only useful in USB host mode. 131 *------------------------------------------------------------------------*/ 132static void 133usbd_get_debug_bits(struct usb_device *udev, struct usb_device_request *req, 134 struct usb_ctrl_debug_bits *dbg) 135{ 136 int temp; 137 138 memset(dbg, 0, sizeof(*dbg)); 139 140 /* Compute data stage delay */ 141 142 temp = usb_ctrl_debug.ds_delay; 143 if (temp < 0) 144 temp = 0; 145 else if (temp > (16*1024)) 146 temp = (16*1024); 147 148 dbg->ds_delay = temp; 149 150 /* Compute status stage delay */ 151 152 temp = usb_ctrl_debug.ss_delay; 153 if (temp < 0) 154 temp = 0; 155 else if (temp > (16*1024)) 156 temp = (16*1024); 157 158 dbg->ss_delay = temp; 159 160 /* Check if this control request should be failed */ 161 162 if (usbd_get_bus_index(udev) != usb_ctrl_debug.bus_index) 163 return; 164 165 if (usbd_get_device_index(udev) != usb_ctrl_debug.dev_index) 166 return; 167 168 temp = usb_ctrl_debug.bmRequestType_value; 169 170 if ((temp != req->bmRequestType) && (temp >= 0) && (temp <= 255)) 171 return; 172 173 temp = usb_ctrl_debug.bRequest_value; 174 175 if ((temp != req->bRequest) && (temp >= 0) && (temp <= 255)) 176 return; 177 178 temp = usb_ctrl_debug.ds_fail; 179 if (temp) 180 dbg->ds_fail = 1; 181 182 temp = usb_ctrl_debug.ss_fail; 183 if (temp) 184 dbg->ss_fail = 1; 185 186 dbg->enabled = 1; 187} 188#endif /* USB_REQ_DEBUG */ 189#endif /* USB_DEBUG */ 190 191/*------------------------------------------------------------------------* 192 * usbd_do_request_callback 193 * 194 * This function is the USB callback for generic USB Host control 195 * transfers. 196 *------------------------------------------------------------------------*/ 197void 198usbd_do_request_callback(struct usb_xfer *xfer, usb_error_t error) 199{ 200 ; /* workaround for a bug in "indent" */ 201 202 DPRINTF("st=%u\n", USB_GET_STATE(xfer)); 203 204 switch (USB_GET_STATE(xfer)) { 205 case USB_ST_SETUP: 206 usbd_transfer_submit(xfer); 207 break; 208 default: 209 cv_signal(&xfer->xroot->udev->ctrlreq_cv); 210 break; 211 } 212} 213 214/*------------------------------------------------------------------------* 215 * usb_do_clear_stall_callback 216 * 217 * This function is the USB callback for generic clear stall requests. 218 *------------------------------------------------------------------------*/ 219void 220usb_do_clear_stall_callback(struct usb_xfer *xfer, usb_error_t error) 221{ 222 struct usb_device_request req; 223 struct usb_device *udev; 224 struct usb_endpoint *ep; 225 struct usb_endpoint *ep_end; 226 struct usb_endpoint *ep_first; 227 uint8_t to; 228 229 udev = xfer->xroot->udev; 230 231 USB_BUS_LOCK(udev->bus); 232 233 /* round robin endpoint clear stall */ 234 235 ep = udev->ep_curr; 236 ep_end = udev->endpoints + udev->endpoints_max; 237 ep_first = udev->endpoints; 238 to = udev->endpoints_max; 239 240 switch (USB_GET_STATE(xfer)) { 241 case USB_ST_TRANSFERRED: 242 if (ep == NULL) 243 goto tr_setup; /* device was unconfigured */ 244 if (ep->edesc && 245 ep->is_stalled) { 246 ep->toggle_next = 0; 247 ep->is_stalled = 0; 248 /* some hardware needs a callback to clear the data toggle */ 249 usbd_clear_stall_locked(udev, ep); 250 /* start up the current or next transfer, if any */ 251 usb_command_wrapper(&ep->endpoint_q, 252 ep->endpoint_q.curr); 253 } 254 ep++; 255 256 case USB_ST_SETUP: 257tr_setup: 258 if (to == 0) 259 break; /* no endpoints - nothing to do */ 260 if ((ep < ep_first) || (ep >= ep_end)) 261 ep = ep_first; /* endpoint wrapped around */ 262 if (ep->edesc && 263 ep->is_stalled) { 264 265 /* setup a clear-stall packet */ 266 267 req.bmRequestType = UT_WRITE_ENDPOINT; 268 req.bRequest = UR_CLEAR_FEATURE; 269 USETW(req.wValue, UF_ENDPOINT_HALT); 270 req.wIndex[0] = ep->edesc->bEndpointAddress; 271 req.wIndex[1] = 0; 272 USETW(req.wLength, 0); 273 274 /* copy in the transfer */ 275 276 usbd_copy_in(xfer->frbuffers, 0, &req, sizeof(req)); 277 278 /* set length */ 279 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 280 xfer->nframes = 1; 281 USB_BUS_UNLOCK(udev->bus); 282 283 usbd_transfer_submit(xfer); 284 285 USB_BUS_LOCK(udev->bus); 286 break; 287 } 288 ep++; 289 to--; 290 goto tr_setup; 291 292 default: 293 if (xfer->error == USB_ERR_CANCELLED) { 294 break; 295 } 296 goto tr_setup; 297 } 298 299 /* store current endpoint */ 300 udev->ep_curr = ep; 301 USB_BUS_UNLOCK(udev->bus); 302} 303 304static usb_handle_req_t * 305usbd_get_hr_func(struct usb_device *udev) 306{ 307 /* figure out if there is a Handle Request function */ 308 if (udev->flags.usb_mode == USB_MODE_DEVICE) 309 return (usb_temp_get_desc_p); 310 else if (udev->parent_hub == NULL) 311 return (udev->bus->methods->roothub_exec); 312 else 313 return (NULL); 314} 315 316/*------------------------------------------------------------------------* 317 * usbd_do_request_flags and usbd_do_request 318 * 319 * Description of arguments passed to these functions: 320 * 321 * "udev" - this is the "usb_device" structure pointer on which the 322 * request should be performed. It is possible to call this function 323 * in both Host Side mode and Device Side mode. 324 * 325 * "mtx" - if this argument is non-NULL the mutex pointed to by it 326 * will get dropped and picked up during the execution of this 327 * function, hence this function sometimes needs to sleep. If this 328 * argument is NULL it has no effect. 329 * 330 * "req" - this argument must always be non-NULL and points to an 331 * 8-byte structure holding the USB request to be done. The USB 332 * request structure has a bit telling the direction of the USB 333 * request, if it is a read or a write. 334 * 335 * "data" - if the "wLength" part of the structure pointed to by "req" 336 * is non-zero this argument must point to a valid kernel buffer which 337 * can hold at least "wLength" bytes. If "wLength" is zero "data" can 338 * be NULL. 339 * 340 * "flags" - here is a list of valid flags: 341 * 342 * o USB_SHORT_XFER_OK: allows the data transfer to be shorter than 343 * specified 344 * 345 * o USB_DELAY_STATUS_STAGE: allows the status stage to be performed 346 * at a later point in time. This is tunable by the "hw.usb.ss_delay" 347 * sysctl. This flag is mostly useful for debugging. 348 * 349 * o USB_USER_DATA_PTR: treat the "data" pointer like a userland 350 * pointer. 351 * 352 * "actlen" - if non-NULL the actual transfer length will be stored in 353 * the 16-bit unsigned integer pointed to by "actlen". This 354 * information is mostly useful when the "USB_SHORT_XFER_OK" flag is 355 * used. 356 * 357 * "timeout" - gives the timeout for the control transfer in 358 * milliseconds. A "timeout" value less than 50 milliseconds is 359 * treated like a 50 millisecond timeout. A "timeout" value greater 360 * than 30 seconds is treated like a 30 second timeout. This USB stack 361 * does not allow control requests without a timeout. 362 * 363 * NOTE: This function is thread safe. All calls to 364 * "usbd_do_request_flags" will be serialised by the use of an 365 * internal "sx_lock". 366 * 367 * Returns: 368 * 0: Success 369 * Else: Failure 370 *------------------------------------------------------------------------*/ 371usb_error_t 372usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx, 373 struct usb_device_request *req, void *data, uint16_t flags, 374 uint16_t *actlen, usb_timeout_t timeout) 375{ 376#ifdef USB_REQ_DEBUG 377 struct usb_ctrl_debug_bits dbg; 378#endif 379 usb_handle_req_t *hr_func; 380 struct usb_xfer *xfer; 381 const void *desc; 382 int err = 0; 383 usb_ticks_t start_ticks; 384 usb_ticks_t delta_ticks; 385 usb_ticks_t max_ticks; 386 uint16_t length; 387 uint16_t temp; 388 uint16_t acttemp; 389 uint8_t enum_locked; 390 391 if (timeout < 50) { 392 /* timeout is too small */ 393 timeout = 50; 394 } 395 if (timeout > 30000) { 396 /* timeout is too big */ 397 timeout = 30000; 398 } 399 length = UGETW(req->wLength); 400 401 enum_locked = usbd_enum_is_locked(udev); 402 403 DPRINTFN(5, "udev=%p bmRequestType=0x%02x bRequest=0x%02x " 404 "wValue=0x%02x%02x wIndex=0x%02x%02x wLength=0x%02x%02x\n", 405 udev, req->bmRequestType, req->bRequest, 406 req->wValue[1], req->wValue[0], 407 req->wIndex[1], req->wIndex[0], 408 req->wLength[1], req->wLength[0]); 409 410 /* Check if the device is still alive */ 411 if (udev->state < USB_STATE_POWERED) { 412 DPRINTF("usb device has gone\n"); 413 return (USB_ERR_NOT_CONFIGURED); 414 } 415 416 /* 417 * Set "actlen" to a known value in case the caller does not 418 * check the return value: 419 */ 420 if (actlen) 421 *actlen = 0; 422 423#if (USB_HAVE_USER_IO == 0) 424 if (flags & USB_USER_DATA_PTR) 425 return (USB_ERR_INVAL); 426#endif 427 if ((mtx != NULL) && (mtx != &Giant)) { 428 mtx_unlock(mtx); 429 mtx_assert(mtx, MA_NOTOWNED); 430 } 431 432 /* 433 * We need to allow suspend and resume at this point, else the 434 * control transfer will timeout if the device is suspended! 435 */ 436 if (enum_locked) 437 usbd_sr_unlock(udev); 438 439 /* 440 * Grab the default sx-lock so that serialisation 441 * is achieved when multiple threads are involved: 442 */ 443 sx_xlock(&udev->ctrl_sx); 444 445 hr_func = usbd_get_hr_func(udev); 446 447 if (hr_func != NULL) { 448 DPRINTF("Handle Request function is set\n"); 449 450 desc = NULL; 451 temp = 0; 452 453 if (!(req->bmRequestType & UT_READ)) { 454 if (length != 0) { 455 DPRINTFN(1, "The handle request function " 456 "does not support writing data!\n"); 457 err = USB_ERR_INVAL; 458 goto done; 459 } 460 } 461 462 /* The root HUB code needs the BUS lock locked */ 463 464 USB_BUS_LOCK(udev->bus); 465 err = (hr_func) (udev, req, &desc, &temp); 466 USB_BUS_UNLOCK(udev->bus); 467 468 if (err) 469 goto done; 470 471 if (length > temp) { 472 if (!(flags & USB_SHORT_XFER_OK)) { 473 err = USB_ERR_SHORT_XFER; 474 goto done; 475 } 476 length = temp; 477 } 478 if (actlen) 479 *actlen = length; 480 481 if (length > 0) { 482#if USB_HAVE_USER_IO 483 if (flags & USB_USER_DATA_PTR) { 484 if (copyout(desc, data, length)) { 485 err = USB_ERR_INVAL; 486 goto done; 487 } 488 } else 489#endif 490 bcopy(desc, data, length); 491 } 492 goto done; /* success */ 493 } 494 495 /* 496 * Setup a new USB transfer or use the existing one, if any: 497 */ 498 usbd_ctrl_transfer_setup(udev); 499 500 xfer = udev->ctrl_xfer[0]; 501 if (xfer == NULL) { 502 /* most likely out of memory */ 503 err = USB_ERR_NOMEM; 504 goto done; 505 } 506 507#ifdef USB_REQ_DEBUG 508 /* Get debug bits */ 509 usbd_get_debug_bits(udev, req, &dbg); 510 511 /* Check for fault injection */ 512 if (dbg.enabled) 513 flags |= USB_DELAY_STATUS_STAGE; 514#endif 515 USB_XFER_LOCK(xfer); 516 517 if (flags & USB_DELAY_STATUS_STAGE) 518 xfer->flags.manual_status = 1; 519 else 520 xfer->flags.manual_status = 0; 521 522 if (flags & USB_SHORT_XFER_OK) 523 xfer->flags.short_xfer_ok = 1; 524 else 525 xfer->flags.short_xfer_ok = 0; 526 527 xfer->timeout = timeout; 528 529 start_ticks = ticks; 530 531 max_ticks = USB_MS_TO_TICKS(timeout); 532 533 usbd_copy_in(xfer->frbuffers, 0, req, sizeof(*req)); 534 535 usbd_xfer_set_frame_len(xfer, 0, sizeof(*req)); 536 537 while (1) { 538 temp = length; 539 if (temp > usbd_xfer_max_len(xfer)) { 540 temp = usbd_xfer_max_len(xfer); 541 } 542#ifdef USB_REQ_DEBUG 543 if (xfer->flags.manual_status) { 544 if (usbd_xfer_frame_len(xfer, 0) != 0) { 545 /* Execute data stage separately */ 546 temp = 0; 547 } else if (temp > 0) { 548 if (dbg.ds_fail) { 549 err = USB_ERR_INVAL; 550 break; 551 } 552 if (dbg.ds_delay > 0) { 553 usb_pause_mtx( 554 xfer->xroot->xfer_mtx, 555 USB_MS_TO_TICKS(dbg.ds_delay)); 556 /* make sure we don't time out */ 557 start_ticks = ticks; 558 } 559 } 560 } 561#endif 562 usbd_xfer_set_frame_len(xfer, 1, temp); 563 564 if (temp > 0) { 565 if (!(req->bmRequestType & UT_READ)) { 566#if USB_HAVE_USER_IO 567 if (flags & USB_USER_DATA_PTR) { 568 USB_XFER_UNLOCK(xfer); 569 err = usbd_copy_in_user(xfer->frbuffers + 1, 570 0, data, temp); 571 USB_XFER_LOCK(xfer); 572 if (err) { 573 err = USB_ERR_INVAL; 574 break; 575 } 576 } else 577#endif 578 usbd_copy_in(xfer->frbuffers + 1, 579 0, data, temp); 580 } 581 usbd_xfer_set_frames(xfer, 2); 582 } else { 583 if (usbd_xfer_frame_len(xfer, 0) == 0) { 584 if (xfer->flags.manual_status) { 585#ifdef USB_REQ_DEBUG 586 if (dbg.ss_fail) { 587 err = USB_ERR_INVAL; 588 break; 589 } 590 if (dbg.ss_delay > 0) { 591 usb_pause_mtx( 592 xfer->xroot->xfer_mtx, 593 USB_MS_TO_TICKS(dbg.ss_delay)); 594 /* make sure we don't time out */ 595 start_ticks = ticks; 596 } 597#endif 598 xfer->flags.manual_status = 0; 599 } else { 600 break; 601 } 602 } 603 usbd_xfer_set_frames(xfer, 1); 604 } 605 606 usbd_transfer_start(xfer); 607 608 while (usbd_transfer_pending(xfer)) { 609 cv_wait(&udev->ctrlreq_cv, 610 xfer->xroot->xfer_mtx); 611 } 612 613 err = xfer->error; 614 615 if (err) { 616 break; 617 } 618 619 /* get actual length of DATA stage */ 620 621 if (xfer->aframes < 2) { 622 acttemp = 0; 623 } else { 624 acttemp = usbd_xfer_frame_len(xfer, 1); 625 } 626 627 /* check for short packet */ 628 629 if (temp > acttemp) { 630 temp = acttemp; 631 length = temp; 632 } 633 if (temp > 0) { 634 if (req->bmRequestType & UT_READ) { 635#if USB_HAVE_USER_IO 636 if (flags & USB_USER_DATA_PTR) { 637 USB_XFER_UNLOCK(xfer); 638 err = usbd_copy_out_user(xfer->frbuffers + 1, 639 0, data, temp); 640 USB_XFER_LOCK(xfer); 641 if (err) { 642 err = USB_ERR_INVAL; 643 break; 644 } 645 } else 646#endif 647 usbd_copy_out(xfer->frbuffers + 1, 648 0, data, temp); 649 } 650 } 651 /* 652 * Clear "frlengths[0]" so that we don't send the setup 653 * packet again: 654 */ 655 usbd_xfer_set_frame_len(xfer, 0, 0); 656 657 /* update length and data pointer */ 658 length -= temp; 659 data = USB_ADD_BYTES(data, temp); 660 661 if (actlen) { 662 (*actlen) += temp; 663 } 664 /* check for timeout */ 665 666 delta_ticks = ticks - start_ticks; 667 if (delta_ticks > max_ticks) { 668 if (!err) { 669 err = USB_ERR_TIMEOUT; 670 } 671 } 672 if (err) { 673 break; 674 } 675 } 676 677 if (err) { 678 /* 679 * Make sure that the control endpoint is no longer 680 * blocked in case of a non-transfer related error: 681 */ 682 usbd_transfer_stop(xfer); 683 } 684 USB_XFER_UNLOCK(xfer); 685 686done: 687 sx_xunlock(&udev->ctrl_sx); 688 689 if (enum_locked) 690 usbd_sr_lock(udev); 691 692 if ((mtx != NULL) && (mtx != &Giant)) 693 mtx_lock(mtx); 694 695 return ((usb_error_t)err); 696} 697 698/*------------------------------------------------------------------------* 699 * usbd_do_request_proc - factored out code 700 * 701 * This function is factored out code. It does basically the same like 702 * usbd_do_request_flags, except it will check the status of the 703 * passed process argument before doing the USB request. If the 704 * process is draining the USB_ERR_IOERROR code will be returned. It 705 * is assumed that the mutex associated with the process is locked 706 * when calling this function. 707 *------------------------------------------------------------------------*/ 708usb_error_t 709usbd_do_request_proc(struct usb_device *udev, struct usb_process *pproc, 710 struct usb_device_request *req, void *data, uint16_t flags, 711 uint16_t *actlen, usb_timeout_t timeout) 712{ 713 usb_error_t err; 714 uint16_t len; 715 716 /* get request data length */ 717 len = UGETW(req->wLength); 718 719 /* check if the device is being detached */ 720 if (usb_proc_is_gone(pproc)) { 721 err = USB_ERR_IOERROR; 722 goto done; 723 } 724 725 /* forward the USB request */ 726 err = usbd_do_request_flags(udev, pproc->up_mtx, 727 req, data, flags, actlen, timeout); 728 729done: 730 /* on failure we zero the data */ 731 /* on short packet we zero the unused data */ 732 if ((len != 0) && (req->bmRequestType & UE_DIR_IN)) { 733 if (err) 734 memset(data, 0, len); 735 else if (actlen && *actlen != len) 736 memset(((uint8_t *)data) + *actlen, 0, len - *actlen); 737 } 738 return (err); 739} 740 741/*------------------------------------------------------------------------* 742 * usbd_req_reset_port 743 * 744 * This function will instruct a USB HUB to perform a reset sequence 745 * on the specified port number. 746 * 747 * Returns: 748 * 0: Success. The USB device should now be at address zero. 749 * Else: Failure. No USB device is present and the USB port should be 750 * disabled. 751 *------------------------------------------------------------------------*/ 752usb_error_t 753usbd_req_reset_port(struct usb_device *udev, struct mtx *mtx, uint8_t port) 754{ 755 struct usb_port_status ps; 756 usb_error_t err; 757 uint16_t n; 758 759#ifdef USB_DEBUG 760 uint16_t pr_poll_delay; 761 uint16_t pr_recovery_delay; 762 763#endif 764 err = usbd_req_set_port_feature(udev, mtx, port, UHF_PORT_RESET); 765 if (err) { 766 goto done; 767 } 768#ifdef USB_DEBUG 769 /* range check input parameters */ 770 pr_poll_delay = usb_pr_poll_delay; 771 if (pr_poll_delay < 1) { 772 pr_poll_delay = 1; 773 } else if (pr_poll_delay > 1000) { 774 pr_poll_delay = 1000; 775 } 776 pr_recovery_delay = usb_pr_recovery_delay; 777 if (pr_recovery_delay > 1000) { 778 pr_recovery_delay = 1000; 779 } 780#endif 781 n = 0; 782 while (1) { 783#ifdef USB_DEBUG 784 /* wait for the device to recover from reset */ 785 usb_pause_mtx(mtx, USB_MS_TO_TICKS(pr_poll_delay)); 786 n += pr_poll_delay; 787#else 788 /* wait for the device to recover from reset */ 789 usb_pause_mtx(mtx, USB_MS_TO_TICKS(USB_PORT_RESET_DELAY)); 790 n += USB_PORT_RESET_DELAY; 791#endif 792 err = usbd_req_get_port_status(udev, mtx, &ps, port); 793 if (err) { 794 goto done; 795 } 796 /* check if reset is complete */ 797 if (UGETW(ps.wPortChange) & UPS_C_PORT_RESET) { 798 break; 799 } 800 /* check for timeout */ 801 if (n > 1000) { 802 n = 0; 803 break; 804 } 805 } 806 807 /* clear port reset first */ 808 err = usbd_req_clear_port_feature( 809 udev, mtx, port, UHF_C_PORT_RESET); 810 if (err) { 811 goto done; 812 } 813 /* check for timeout */ 814 if (n == 0) { 815 err = USB_ERR_TIMEOUT; 816 goto done; 817 } 818#ifdef USB_DEBUG 819 /* wait for the device to recover from reset */ 820 usb_pause_mtx(mtx, USB_MS_TO_TICKS(pr_recovery_delay)); 821#else 822 /* wait for the device to recover from reset */ 823 usb_pause_mtx(mtx, USB_MS_TO_TICKS(USB_PORT_RESET_RECOVERY)); 824#endif 825 826done: 827 DPRINTFN(2, "port %d reset returning error=%s\n", 828 port, usbd_errstr(err)); 829 return (err); 830} 831 832/*------------------------------------------------------------------------* 833 * usbd_req_warm_reset_port 834 * 835 * This function will instruct an USB HUB to perform a warm reset 836 * sequence on the specified port number. This kind of reset is not 837 * mandatory for LOW-, FULL- and HIGH-speed USB HUBs and is targeted 838 * for SUPER-speed USB HUBs. 839 * 840 * Returns: 841 * 0: Success. The USB device should now be available again. 842 * Else: Failure. No USB device is present and the USB port should be 843 * disabled. 844 *------------------------------------------------------------------------*/ 845usb_error_t 846usbd_req_warm_reset_port(struct usb_device *udev, struct mtx *mtx, uint8_t port) 847{ 848 struct usb_port_status ps; 849 usb_error_t err; 850 uint16_t n; 851 852#ifdef USB_DEBUG 853 uint16_t pr_poll_delay; 854 uint16_t pr_recovery_delay; 855 856#endif 857 err = usbd_req_set_port_feature(udev, mtx, port, UHF_BH_PORT_RESET); 858 if (err) { 859 goto done; 860 } 861#ifdef USB_DEBUG 862 /* range check input parameters */ 863 pr_poll_delay = usb_pr_poll_delay; 864 if (pr_poll_delay < 1) { 865 pr_poll_delay = 1; 866 } else if (pr_poll_delay > 1000) { 867 pr_poll_delay = 1000; 868 } 869 pr_recovery_delay = usb_pr_recovery_delay; 870 if (pr_recovery_delay > 1000) { 871 pr_recovery_delay = 1000; 872 } 873#endif 874 n = 0; 875 while (1) { 876#ifdef USB_DEBUG 877 /* wait for the device to recover from reset */ 878 usb_pause_mtx(mtx, USB_MS_TO_TICKS(pr_poll_delay)); 879 n += pr_poll_delay; 880#else 881 /* wait for the device to recover from reset */ 882 usb_pause_mtx(mtx, USB_MS_TO_TICKS(USB_PORT_RESET_DELAY)); 883 n += USB_PORT_RESET_DELAY; 884#endif 885 err = usbd_req_get_port_status(udev, mtx, &ps, port); 886 if (err) { 887 goto done; 888 } 889 /* if the device disappeared, just give up */ 890 if (!(UGETW(ps.wPortStatus) & UPS_CURRENT_CONNECT_STATUS)) { 891 goto done; 892 } 893 /* check if reset is complete */ 894 if (UGETW(ps.wPortChange) & UPS_C_BH_PORT_RESET) { 895 break; 896 } 897 /* check for timeout */ 898 if (n > 1000) { 899 n = 0; 900 break; 901 } 902 } 903 904 /* clear port reset first */ 905 err = usbd_req_clear_port_feature( 906 udev, mtx, port, UHF_C_BH_PORT_RESET); 907 if (err) { 908 goto done; 909 } 910 /* check for timeout */ 911 if (n == 0) { 912 err = USB_ERR_TIMEOUT; 913 goto done; 914 } 915#ifdef USB_DEBUG 916 /* wait for the device to recover from reset */ 917 usb_pause_mtx(mtx, USB_MS_TO_TICKS(pr_recovery_delay)); 918#else 919 /* wait for the device to recover from reset */ 920 usb_pause_mtx(mtx, USB_MS_TO_TICKS(USB_PORT_RESET_RECOVERY)); 921#endif 922 923done: 924 DPRINTFN(2, "port %d warm reset returning error=%s\n", 925 port, usbd_errstr(err)); 926 return (err); 927} 928 929/*------------------------------------------------------------------------* 930 * usbd_req_get_desc 931 * 932 * This function can be used to retrieve USB descriptors. It contains 933 * some additional logic like zeroing of missing descriptor bytes and 934 * retrying an USB descriptor in case of failure. The "min_len" 935 * argument specifies the minimum descriptor length. The "max_len" 936 * argument specifies the maximum descriptor length. If the real 937 * descriptor length is less than the minimum length the missing 938 * byte(s) will be zeroed. The type field, the second byte of the USB 939 * descriptor, will get forced to the correct type. If the "actlen" 940 * pointer is non-NULL, the actual length of the transfer will get 941 * stored in the 16-bit unsigned integer which it is pointing to. The 942 * first byte of the descriptor will not get updated. If the "actlen" 943 * pointer is NULL the first byte of the descriptor will get updated 944 * to reflect the actual length instead. If "min_len" is not equal to 945 * "max_len" then this function will try to retrive the beginning of 946 * the descriptor and base the maximum length on the first byte of the 947 * descriptor. 948 * 949 * Returns: 950 * 0: Success 951 * Else: Failure 952 *------------------------------------------------------------------------*/ 953usb_error_t 954usbd_req_get_desc(struct usb_device *udev, 955 struct mtx *mtx, uint16_t *actlen, void *desc, 956 uint16_t min_len, uint16_t max_len, 957 uint16_t id, uint8_t type, uint8_t index, 958 uint8_t retries) 959{ 960 struct usb_device_request req; 961 uint8_t *buf; 962 usb_error_t err; 963 964 DPRINTFN(4, "id=%d, type=%d, index=%d, max_len=%d\n", 965 id, type, index, max_len); 966 967 req.bmRequestType = UT_READ_DEVICE; 968 req.bRequest = UR_GET_DESCRIPTOR; 969 USETW2(req.wValue, type, index); 970 USETW(req.wIndex, id); 971 972 while (1) { 973 974 if ((min_len < 2) || (max_len < 2)) { 975 err = USB_ERR_INVAL; 976 goto done; 977 } 978 USETW(req.wLength, min_len); 979 980 err = usbd_do_request_flags(udev, mtx, &req, 981 desc, 0, NULL, 1000); 982 983 if (err) { 984 if (!retries) { 985 goto done; 986 } 987 retries--; 988 989 usb_pause_mtx(mtx, hz / 5); 990 991 continue; 992 } 993 buf = desc; 994 995 if (min_len == max_len) { 996 997 /* enforce correct length */ 998 if ((buf[0] > min_len) && (actlen == NULL)) 999 buf[0] = min_len; 1000 1001 /* enforce correct type */ 1002 buf[1] = type; 1003 1004 goto done; 1005 } 1006 /* range check */ 1007 1008 if (max_len > buf[0]) { 1009 max_len = buf[0]; 1010 } 1011 /* zero minimum data */ 1012 1013 while (min_len > max_len) { 1014 min_len--; 1015 buf[min_len] = 0; 1016 } 1017 1018 /* set new minimum length */ 1019 1020 min_len = max_len; 1021 } 1022done: 1023 if (actlen != NULL) { 1024 if (err) 1025 *actlen = 0; 1026 else 1027 *actlen = min_len; 1028 } 1029 return (err); 1030} 1031 1032/*------------------------------------------------------------------------* 1033 * usbd_req_get_string_any 1034 * 1035 * This function will return the string given by "string_index" 1036 * using the first language ID. The maximum length "len" includes 1037 * the terminating zero. The "len" argument should be twice as 1038 * big pluss 2 bytes, compared with the actual maximum string length ! 1039 * 1040 * Returns: 1041 * 0: Success 1042 * Else: Failure 1043 *------------------------------------------------------------------------*/ 1044usb_error_t 1045usbd_req_get_string_any(struct usb_device *udev, struct mtx *mtx, char *buf, 1046 uint16_t len, uint8_t string_index) 1047{ 1048 char *s; 1049 uint8_t *temp; 1050 uint16_t i; 1051 uint16_t n; 1052 uint16_t c; 1053 uint8_t swap; 1054 usb_error_t err; 1055 1056 if (len == 0) { 1057 /* should not happen */ 1058 return (USB_ERR_NORMAL_COMPLETION); 1059 } 1060 if (string_index == 0) { 1061 /* this is the language table */ 1062 buf[0] = 0; 1063 return (USB_ERR_INVAL); 1064 } 1065 if (udev->flags.no_strings) { 1066 buf[0] = 0; 1067 return (USB_ERR_STALLED); 1068 } 1069 err = usbd_req_get_string_desc 1070 (udev, mtx, buf, len, udev->langid, string_index); 1071 if (err) { 1072 buf[0] = 0; 1073 return (err); 1074 } 1075 temp = (uint8_t *)buf; 1076 1077 if (temp[0] < 2) { 1078 /* string length is too short */ 1079 buf[0] = 0; 1080 return (USB_ERR_INVAL); 1081 } 1082 /* reserve one byte for terminating zero */ 1083 len--; 1084 1085 /* find maximum length */ 1086 s = buf; 1087 n = (temp[0] / 2) - 1; 1088 if (n > len) { 1089 n = len; 1090 } 1091 /* skip descriptor header */ 1092 temp += 2; 1093 1094 /* reset swap state */ 1095 swap = 3; 1096 1097 /* convert and filter */ 1098 for (i = 0; (i != n); i++) { 1099 c = UGETW(temp + (2 * i)); 1100 1101 /* convert from Unicode, handle buggy strings */ 1102 if (((c & 0xff00) == 0) && (swap & 1)) { 1103 /* Little Endian, default */ 1104 *s = c; 1105 swap = 1; 1106 } else if (((c & 0x00ff) == 0) && (swap & 2)) { 1107 /* Big Endian */ 1108 *s = c >> 8; 1109 swap = 2; 1110 } else { 1111 /* silently skip bad character */ 1112 continue; 1113 } 1114 1115 /* 1116 * Filter by default - We only allow alphanumerical 1117 * and a few more to avoid any problems with scripts 1118 * and daemons. 1119 */ 1120 if (isalpha(*s) || 1121 isdigit(*s) || 1122 *s == '-' || 1123 *s == '+' || 1124 *s == ' ' || 1125 *s == '.' || 1126 *s == ',') { 1127 /* allowed */ 1128 s++; 1129 } 1130 /* silently skip bad character */ 1131 } 1132 *s = 0; /* zero terminate resulting string */ 1133 return (USB_ERR_NORMAL_COMPLETION); 1134} 1135 1136/*------------------------------------------------------------------------* 1137 * usbd_req_get_string_desc 1138 * 1139 * If you don't know the language ID, consider using 1140 * "usbd_req_get_string_any()". 1141 * 1142 * Returns: 1143 * 0: Success 1144 * Else: Failure 1145 *------------------------------------------------------------------------*/ 1146usb_error_t 1147usbd_req_get_string_desc(struct usb_device *udev, struct mtx *mtx, void *sdesc, 1148 uint16_t max_len, uint16_t lang_id, 1149 uint8_t string_index) 1150{ 1151 return (usbd_req_get_desc(udev, mtx, NULL, sdesc, 2, max_len, lang_id, 1152 UDESC_STRING, string_index, 0)); 1153} 1154 1155/*------------------------------------------------------------------------* 1156 * usbd_req_get_config_desc_ptr 1157 * 1158 * This function is used in device side mode to retrieve the pointer 1159 * to the generated config descriptor. This saves allocating space for 1160 * an additional config descriptor when setting the configuration. 1161 * 1162 * Returns: 1163 * 0: Success 1164 * Else: Failure 1165 *------------------------------------------------------------------------*/ 1166usb_error_t 1167usbd_req_get_descriptor_ptr(struct usb_device *udev, 1168 struct usb_config_descriptor **ppcd, uint16_t wValue) 1169{ 1170 struct usb_device_request req; 1171 usb_handle_req_t *hr_func; 1172 const void *ptr; 1173 uint16_t len; 1174 usb_error_t err; 1175 1176 req.bmRequestType = UT_READ_DEVICE; 1177 req.bRequest = UR_GET_DESCRIPTOR; 1178 USETW(req.wValue, wValue); 1179 USETW(req.wIndex, 0); 1180 USETW(req.wLength, 0); 1181 1182 ptr = NULL; 1183 len = 0; 1184 1185 hr_func = usbd_get_hr_func(udev); 1186 1187 if (hr_func == NULL) 1188 err = USB_ERR_INVAL; 1189 else { 1190 USB_BUS_LOCK(udev->bus); 1191 err = (hr_func) (udev, &req, &ptr, &len); 1192 USB_BUS_UNLOCK(udev->bus); 1193 } 1194 1195 if (err) 1196 ptr = NULL; 1197 else if (ptr == NULL) 1198 err = USB_ERR_INVAL; 1199 1200 *ppcd = __DECONST(struct usb_config_descriptor *, ptr); 1201 1202 return (err); 1203} 1204 1205/*------------------------------------------------------------------------* 1206 * usbd_req_get_config_desc 1207 * 1208 * Returns: 1209 * 0: Success 1210 * Else: Failure 1211 *------------------------------------------------------------------------*/ 1212usb_error_t 1213usbd_req_get_config_desc(struct usb_device *udev, struct mtx *mtx, 1214 struct usb_config_descriptor *d, uint8_t conf_index) 1215{ 1216 usb_error_t err; 1217 1218 DPRINTFN(4, "confidx=%d\n", conf_index); 1219 1220 err = usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), 1221 sizeof(*d), 0, UDESC_CONFIG, conf_index, 0); 1222 if (err) { 1223 goto done; 1224 } 1225 /* Extra sanity checking */ 1226 if (UGETW(d->wTotalLength) < sizeof(*d)) { 1227 err = USB_ERR_INVAL; 1228 } 1229done: 1230 return (err); 1231} 1232 1233/*------------------------------------------------------------------------* 1234 * usbd_req_get_config_desc_full 1235 * 1236 * This function gets the complete USB configuration descriptor and 1237 * ensures that "wTotalLength" is correct. 1238 * 1239 * Returns: 1240 * 0: Success 1241 * Else: Failure 1242 *------------------------------------------------------------------------*/ 1243usb_error_t 1244usbd_req_get_config_desc_full(struct usb_device *udev, struct mtx *mtx, 1245 struct usb_config_descriptor **ppcd, struct malloc_type *mtype, 1246 uint8_t index) 1247{ 1248 struct usb_config_descriptor cd; 1249 struct usb_config_descriptor *cdesc; 1250 uint16_t len; 1251 usb_error_t err; 1252 1253 DPRINTFN(4, "index=%d\n", index); 1254 1255 *ppcd = NULL; 1256 1257 err = usbd_req_get_config_desc(udev, mtx, &cd, index); 1258 if (err) { 1259 return (err); 1260 } 1261 /* get full descriptor */ 1262 len = UGETW(cd.wTotalLength); 1263 if (len < sizeof(*cdesc)) { 1264 /* corrupt descriptor */ 1265 return (USB_ERR_INVAL); 1266 } 1267 cdesc = malloc(len, mtype, M_WAITOK); 1268 if (cdesc == NULL) { 1269 return (USB_ERR_NOMEM); 1270 } 1271 err = usbd_req_get_desc(udev, mtx, NULL, cdesc, len, len, 0, 1272 UDESC_CONFIG, index, 3); 1273 if (err) { 1274 free(cdesc, mtype); 1275 return (err); 1276 } 1277 /* make sure that the device is not fooling us: */ 1278 USETW(cdesc->wTotalLength, len); 1279 1280 *ppcd = cdesc; 1281 1282 return (0); /* success */ 1283} 1284 1285/*------------------------------------------------------------------------* 1286 * usbd_req_get_device_desc 1287 * 1288 * Returns: 1289 * 0: Success 1290 * Else: Failure 1291 *------------------------------------------------------------------------*/ 1292usb_error_t 1293usbd_req_get_device_desc(struct usb_device *udev, struct mtx *mtx, 1294 struct usb_device_descriptor *d) 1295{ 1296 DPRINTFN(4, "\n"); 1297 return (usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), 1298 sizeof(*d), 0, UDESC_DEVICE, 0, 3)); 1299} 1300 1301/*------------------------------------------------------------------------* 1302 * usbd_req_get_alt_interface_no 1303 * 1304 * Returns: 1305 * 0: Success 1306 * Else: Failure 1307 *------------------------------------------------------------------------*/ 1308usb_error_t 1309usbd_req_get_alt_interface_no(struct usb_device *udev, struct mtx *mtx, 1310 uint8_t *alt_iface_no, uint8_t iface_index) 1311{ 1312 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1313 struct usb_device_request req; 1314 1315 if ((iface == NULL) || (iface->idesc == NULL)) 1316 return (USB_ERR_INVAL); 1317 1318 req.bmRequestType = UT_READ_INTERFACE; 1319 req.bRequest = UR_GET_INTERFACE; 1320 USETW(req.wValue, 0); 1321 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1322 req.wIndex[1] = 0; 1323 USETW(req.wLength, 1); 1324 return (usbd_do_request(udev, mtx, &req, alt_iface_no)); 1325} 1326 1327/*------------------------------------------------------------------------* 1328 * usbd_req_set_alt_interface_no 1329 * 1330 * Returns: 1331 * 0: Success 1332 * Else: Failure 1333 *------------------------------------------------------------------------*/ 1334usb_error_t 1335usbd_req_set_alt_interface_no(struct usb_device *udev, struct mtx *mtx, 1336 uint8_t iface_index, uint8_t alt_no) 1337{ 1338 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1339 struct usb_device_request req; 1340 1341 if ((iface == NULL) || (iface->idesc == NULL)) 1342 return (USB_ERR_INVAL); 1343 1344 req.bmRequestType = UT_WRITE_INTERFACE; 1345 req.bRequest = UR_SET_INTERFACE; 1346 req.wValue[0] = alt_no; 1347 req.wValue[1] = 0; 1348 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1349 req.wIndex[1] = 0; 1350 USETW(req.wLength, 0); 1351 return (usbd_do_request(udev, mtx, &req, 0)); 1352} 1353 1354/*------------------------------------------------------------------------* 1355 * usbd_req_get_device_status 1356 * 1357 * Returns: 1358 * 0: Success 1359 * Else: Failure 1360 *------------------------------------------------------------------------*/ 1361usb_error_t 1362usbd_req_get_device_status(struct usb_device *udev, struct mtx *mtx, 1363 struct usb_status *st) 1364{ 1365 struct usb_device_request req; 1366 1367 req.bmRequestType = UT_READ_DEVICE; 1368 req.bRequest = UR_GET_STATUS; 1369 USETW(req.wValue, 0); 1370 USETW(req.wIndex, 0); 1371 USETW(req.wLength, sizeof(*st)); 1372 return (usbd_do_request(udev, mtx, &req, st)); 1373} 1374 1375/*------------------------------------------------------------------------* 1376 * usbd_req_get_hub_descriptor 1377 * 1378 * Returns: 1379 * 0: Success 1380 * Else: Failure 1381 *------------------------------------------------------------------------*/ 1382usb_error_t 1383usbd_req_get_hub_descriptor(struct usb_device *udev, struct mtx *mtx, 1384 struct usb_hub_descriptor *hd, uint8_t nports) 1385{ 1386 struct usb_device_request req; 1387 uint16_t len = (nports + 7 + (8 * 8)) / 8; 1388 1389 req.bmRequestType = UT_READ_CLASS_DEVICE; 1390 req.bRequest = UR_GET_DESCRIPTOR; 1391 USETW2(req.wValue, UDESC_HUB, 0); 1392 USETW(req.wIndex, 0); 1393 USETW(req.wLength, len); 1394 return (usbd_do_request(udev, mtx, &req, hd)); 1395} 1396 1397/*------------------------------------------------------------------------* 1398 * usbd_req_get_ss_hub_descriptor 1399 * 1400 * Returns: 1401 * 0: Success 1402 * Else: Failure 1403 *------------------------------------------------------------------------*/ 1404usb_error_t 1405usbd_req_get_ss_hub_descriptor(struct usb_device *udev, struct mtx *mtx, 1406 struct usb_hub_ss_descriptor *hd, uint8_t nports) 1407{ 1408 struct usb_device_request req; 1409 uint16_t len = sizeof(*hd) - 32 + 1 + ((nports + 7) / 8); 1410 1411 req.bmRequestType = UT_READ_CLASS_DEVICE; 1412 req.bRequest = UR_GET_DESCRIPTOR; 1413 USETW2(req.wValue, UDESC_SS_HUB, 0); 1414 USETW(req.wIndex, 0); 1415 USETW(req.wLength, len); 1416 return (usbd_do_request(udev, mtx, &req, hd)); 1417} 1418 1419/*------------------------------------------------------------------------* 1420 * usbd_req_get_hub_status 1421 * 1422 * Returns: 1423 * 0: Success 1424 * Else: Failure 1425 *------------------------------------------------------------------------*/ 1426usb_error_t 1427usbd_req_get_hub_status(struct usb_device *udev, struct mtx *mtx, 1428 struct usb_hub_status *st) 1429{ 1430 struct usb_device_request req; 1431 1432 req.bmRequestType = UT_READ_CLASS_DEVICE; 1433 req.bRequest = UR_GET_STATUS; 1434 USETW(req.wValue, 0); 1435 USETW(req.wIndex, 0); 1436 USETW(req.wLength, sizeof(struct usb_hub_status)); 1437 return (usbd_do_request(udev, mtx, &req, st)); 1438} 1439 1440/*------------------------------------------------------------------------* 1441 * usbd_req_set_address 1442 * 1443 * This function is used to set the address for an USB device. After 1444 * port reset the USB device will respond at address zero. 1445 * 1446 * Returns: 1447 * 0: Success 1448 * Else: Failure 1449 *------------------------------------------------------------------------*/ 1450usb_error_t 1451usbd_req_set_address(struct usb_device *udev, struct mtx *mtx, uint16_t addr) 1452{ 1453 struct usb_device_request req; 1454 usb_error_t err; 1455 1456 DPRINTFN(6, "setting device address=%d\n", addr); 1457 1458 req.bmRequestType = UT_WRITE_DEVICE; 1459 req.bRequest = UR_SET_ADDRESS; 1460 USETW(req.wValue, addr); 1461 USETW(req.wIndex, 0); 1462 USETW(req.wLength, 0); 1463 1464 err = USB_ERR_INVAL; 1465 1466 /* check if USB controller handles set address */ 1467 if (udev->bus->methods->set_address != NULL) 1468 err = (udev->bus->methods->set_address) (udev, mtx, addr); 1469 1470 if (err != USB_ERR_INVAL) 1471 goto done; 1472 1473 /* Setting the address should not take more than 1 second ! */ 1474 err = usbd_do_request_flags(udev, mtx, &req, NULL, 1475 USB_DELAY_STATUS_STAGE, NULL, 1000); 1476 1477done: 1478 /* allow device time to set new address */ 1479 usb_pause_mtx(mtx, 1480 USB_MS_TO_TICKS(USB_SET_ADDRESS_SETTLE)); 1481 1482 return (err); 1483} 1484 1485/*------------------------------------------------------------------------* 1486 * usbd_req_get_port_status 1487 * 1488 * Returns: 1489 * 0: Success 1490 * Else: Failure 1491 *------------------------------------------------------------------------*/ 1492usb_error_t 1493usbd_req_get_port_status(struct usb_device *udev, struct mtx *mtx, 1494 struct usb_port_status *ps, uint8_t port) 1495{ 1496 struct usb_device_request req; 1497 1498 req.bmRequestType = UT_READ_CLASS_OTHER; 1499 req.bRequest = UR_GET_STATUS; 1500 USETW(req.wValue, 0); 1501 req.wIndex[0] = port; 1502 req.wIndex[1] = 0; 1503 USETW(req.wLength, sizeof *ps); 1504 return (usbd_do_request(udev, mtx, &req, ps)); 1505} 1506 1507/*------------------------------------------------------------------------* 1508 * usbd_req_clear_hub_feature 1509 * 1510 * Returns: 1511 * 0: Success 1512 * Else: Failure 1513 *------------------------------------------------------------------------*/ 1514usb_error_t 1515usbd_req_clear_hub_feature(struct usb_device *udev, struct mtx *mtx, 1516 uint16_t sel) 1517{ 1518 struct usb_device_request req; 1519 1520 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1521 req.bRequest = UR_CLEAR_FEATURE; 1522 USETW(req.wValue, sel); 1523 USETW(req.wIndex, 0); 1524 USETW(req.wLength, 0); 1525 return (usbd_do_request(udev, mtx, &req, 0)); 1526} 1527 1528/*------------------------------------------------------------------------* 1529 * usbd_req_set_hub_feature 1530 * 1531 * Returns: 1532 * 0: Success 1533 * Else: Failure 1534 *------------------------------------------------------------------------*/ 1535usb_error_t 1536usbd_req_set_hub_feature(struct usb_device *udev, struct mtx *mtx, 1537 uint16_t sel) 1538{ 1539 struct usb_device_request req; 1540 1541 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1542 req.bRequest = UR_SET_FEATURE; 1543 USETW(req.wValue, sel); 1544 USETW(req.wIndex, 0); 1545 USETW(req.wLength, 0); 1546 return (usbd_do_request(udev, mtx, &req, 0)); 1547} 1548 1549/*------------------------------------------------------------------------* 1550 * usbd_req_set_hub_u1_timeout 1551 * 1552 * Returns: 1553 * 0: Success 1554 * Else: Failure 1555 *------------------------------------------------------------------------*/ 1556usb_error_t 1557usbd_req_set_hub_u1_timeout(struct usb_device *udev, struct mtx *mtx, 1558 uint8_t port, uint8_t timeout) 1559{ 1560 struct usb_device_request req; 1561 1562 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1563 req.bRequest = UR_SET_FEATURE; 1564 USETW(req.wValue, UHF_PORT_U1_TIMEOUT); 1565 req.wIndex[0] = port; 1566 req.wIndex[1] = timeout; 1567 USETW(req.wLength, 0); 1568 return (usbd_do_request(udev, mtx, &req, 0)); 1569} 1570 1571/*------------------------------------------------------------------------* 1572 * usbd_req_set_hub_u2_timeout 1573 * 1574 * Returns: 1575 * 0: Success 1576 * Else: Failure 1577 *------------------------------------------------------------------------*/ 1578usb_error_t 1579usbd_req_set_hub_u2_timeout(struct usb_device *udev, struct mtx *mtx, 1580 uint8_t port, uint8_t timeout) 1581{ 1582 struct usb_device_request req; 1583 1584 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1585 req.bRequest = UR_SET_FEATURE; 1586 USETW(req.wValue, UHF_PORT_U2_TIMEOUT); 1587 req.wIndex[0] = port; 1588 req.wIndex[1] = timeout; 1589 USETW(req.wLength, 0); 1590 return (usbd_do_request(udev, mtx, &req, 0)); 1591} 1592 1593/*------------------------------------------------------------------------* 1594 * usbd_req_set_hub_depth 1595 * 1596 * Returns: 1597 * 0: Success 1598 * Else: Failure 1599 *------------------------------------------------------------------------*/ 1600usb_error_t 1601usbd_req_set_hub_depth(struct usb_device *udev, struct mtx *mtx, 1602 uint16_t depth) 1603{ 1604 struct usb_device_request req; 1605 1606 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1607 req.bRequest = UR_SET_HUB_DEPTH; 1608 USETW(req.wValue, depth); 1609 USETW(req.wIndex, 0); 1610 USETW(req.wLength, 0); 1611 return (usbd_do_request(udev, mtx, &req, 0)); 1612} 1613 1614/*------------------------------------------------------------------------* 1615 * usbd_req_clear_port_feature 1616 * 1617 * Returns: 1618 * 0: Success 1619 * Else: Failure 1620 *------------------------------------------------------------------------*/ 1621usb_error_t 1622usbd_req_clear_port_feature(struct usb_device *udev, struct mtx *mtx, 1623 uint8_t port, uint16_t sel) 1624{ 1625 struct usb_device_request req; 1626 1627 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1628 req.bRequest = UR_CLEAR_FEATURE; 1629 USETW(req.wValue, sel); 1630 req.wIndex[0] = port; 1631 req.wIndex[1] = 0; 1632 USETW(req.wLength, 0); 1633 return (usbd_do_request(udev, mtx, &req, 0)); 1634} 1635 1636/*------------------------------------------------------------------------* 1637 * usbd_req_set_port_feature 1638 * 1639 * Returns: 1640 * 0: Success 1641 * Else: Failure 1642 *------------------------------------------------------------------------*/ 1643usb_error_t 1644usbd_req_set_port_feature(struct usb_device *udev, struct mtx *mtx, 1645 uint8_t port, uint16_t sel) 1646{ 1647 struct usb_device_request req; 1648 1649 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1650 req.bRequest = UR_SET_FEATURE; 1651 USETW(req.wValue, sel); 1652 req.wIndex[0] = port; 1653 req.wIndex[1] = 0; 1654 USETW(req.wLength, 0); 1655 return (usbd_do_request(udev, mtx, &req, 0)); 1656} 1657 1658/*------------------------------------------------------------------------* 1659 * usbd_req_set_protocol 1660 * 1661 * Returns: 1662 * 0: Success 1663 * Else: Failure 1664 *------------------------------------------------------------------------*/ 1665usb_error_t 1666usbd_req_set_protocol(struct usb_device *udev, struct mtx *mtx, 1667 uint8_t iface_index, uint16_t report) 1668{ 1669 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1670 struct usb_device_request req; 1671 1672 if ((iface == NULL) || (iface->idesc == NULL)) { 1673 return (USB_ERR_INVAL); 1674 } 1675 DPRINTFN(5, "iface=%p, report=%d, endpt=%d\n", 1676 iface, report, iface->idesc->bInterfaceNumber); 1677 1678 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1679 req.bRequest = UR_SET_PROTOCOL; 1680 USETW(req.wValue, report); 1681 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1682 req.wIndex[1] = 0; 1683 USETW(req.wLength, 0); 1684 return (usbd_do_request(udev, mtx, &req, 0)); 1685} 1686 1687/*------------------------------------------------------------------------* 1688 * usbd_req_set_report 1689 * 1690 * Returns: 1691 * 0: Success 1692 * Else: Failure 1693 *------------------------------------------------------------------------*/ 1694usb_error_t 1695usbd_req_set_report(struct usb_device *udev, struct mtx *mtx, void *data, uint16_t len, 1696 uint8_t iface_index, uint8_t type, uint8_t id) 1697{ 1698 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1699 struct usb_device_request req; 1700 1701 if ((iface == NULL) || (iface->idesc == NULL)) { 1702 return (USB_ERR_INVAL); 1703 } 1704 DPRINTFN(5, "len=%d\n", len); 1705 1706 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1707 req.bRequest = UR_SET_REPORT; 1708 USETW2(req.wValue, type, id); 1709 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1710 req.wIndex[1] = 0; 1711 USETW(req.wLength, len); 1712 return (usbd_do_request(udev, mtx, &req, data)); 1713} 1714 1715/*------------------------------------------------------------------------* 1716 * usbd_req_get_report 1717 * 1718 * Returns: 1719 * 0: Success 1720 * Else: Failure 1721 *------------------------------------------------------------------------*/ 1722usb_error_t 1723usbd_req_get_report(struct usb_device *udev, struct mtx *mtx, void *data, 1724 uint16_t len, uint8_t iface_index, uint8_t type, uint8_t id) 1725{ 1726 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1727 struct usb_device_request req; 1728 1729 if ((iface == NULL) || (iface->idesc == NULL) || (id == 0)) { 1730 return (USB_ERR_INVAL); 1731 } 1732 DPRINTFN(5, "len=%d\n", len); 1733 1734 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1735 req.bRequest = UR_GET_REPORT; 1736 USETW2(req.wValue, type, id); 1737 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1738 req.wIndex[1] = 0; 1739 USETW(req.wLength, len); 1740 return (usbd_do_request(udev, mtx, &req, data)); 1741} 1742 1743/*------------------------------------------------------------------------* 1744 * usbd_req_set_idle 1745 * 1746 * Returns: 1747 * 0: Success 1748 * Else: Failure 1749 *------------------------------------------------------------------------*/ 1750usb_error_t 1751usbd_req_set_idle(struct usb_device *udev, struct mtx *mtx, 1752 uint8_t iface_index, uint8_t duration, uint8_t id) 1753{ 1754 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1755 struct usb_device_request req; 1756 1757 if ((iface == NULL) || (iface->idesc == NULL)) { 1758 return (USB_ERR_INVAL); 1759 } 1760 DPRINTFN(5, "%d %d\n", duration, id); 1761 1762 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1763 req.bRequest = UR_SET_IDLE; 1764 USETW2(req.wValue, duration, id); 1765 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1766 req.wIndex[1] = 0; 1767 USETW(req.wLength, 0); 1768 return (usbd_do_request(udev, mtx, &req, 0)); 1769} 1770 1771/*------------------------------------------------------------------------* 1772 * usbd_req_get_report_descriptor 1773 * 1774 * Returns: 1775 * 0: Success 1776 * Else: Failure 1777 *------------------------------------------------------------------------*/ 1778usb_error_t 1779usbd_req_get_report_descriptor(struct usb_device *udev, struct mtx *mtx, 1780 void *d, uint16_t size, uint8_t iface_index) 1781{ 1782 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1783 struct usb_device_request req; 1784 1785 if ((iface == NULL) || (iface->idesc == NULL)) { 1786 return (USB_ERR_INVAL); 1787 } 1788 req.bmRequestType = UT_READ_INTERFACE; 1789 req.bRequest = UR_GET_DESCRIPTOR; 1790 USETW2(req.wValue, UDESC_REPORT, 0); /* report id should be 0 */ 1791 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1792 req.wIndex[1] = 0; 1793 USETW(req.wLength, size); 1794 return (usbd_do_request(udev, mtx, &req, d)); 1795} 1796 1797/*------------------------------------------------------------------------* 1798 * usbd_req_set_config 1799 * 1800 * This function is used to select the current configuration number in 1801 * both USB device side mode and USB host side mode. When setting the 1802 * configuration the function of the interfaces can change. 1803 * 1804 * Returns: 1805 * 0: Success 1806 * Else: Failure 1807 *------------------------------------------------------------------------*/ 1808usb_error_t 1809usbd_req_set_config(struct usb_device *udev, struct mtx *mtx, uint8_t conf) 1810{ 1811 struct usb_device_request req; 1812 1813 DPRINTF("setting config %d\n", conf); 1814 1815 /* do "set configuration" request */ 1816 1817 req.bmRequestType = UT_WRITE_DEVICE; 1818 req.bRequest = UR_SET_CONFIG; 1819 req.wValue[0] = conf; 1820 req.wValue[1] = 0; 1821 USETW(req.wIndex, 0); 1822 USETW(req.wLength, 0); 1823 return (usbd_do_request(udev, mtx, &req, 0)); 1824} 1825 1826/*------------------------------------------------------------------------* 1827 * usbd_req_get_config 1828 * 1829 * Returns: 1830 * 0: Success 1831 * Else: Failure 1832 *------------------------------------------------------------------------*/ 1833usb_error_t 1834usbd_req_get_config(struct usb_device *udev, struct mtx *mtx, uint8_t *pconf) 1835{ 1836 struct usb_device_request req; 1837 1838 req.bmRequestType = UT_READ_DEVICE; 1839 req.bRequest = UR_GET_CONFIG; 1840 USETW(req.wValue, 0); 1841 USETW(req.wIndex, 0); 1842 USETW(req.wLength, 1); 1843 return (usbd_do_request(udev, mtx, &req, pconf)); 1844} 1845 1846/*------------------------------------------------------------------------* 1847 * usbd_setup_device_desc 1848 *------------------------------------------------------------------------*/ 1849usb_error_t 1850usbd_setup_device_desc(struct usb_device *udev, struct mtx *mtx) 1851{ 1852 usb_error_t err; 1853 1854 /* 1855 * Get the first 8 bytes of the device descriptor ! 1856 * 1857 * NOTE: "usbd_do_request()" will check the device descriptor 1858 * next time we do a request to see if the maximum packet size 1859 * changed! The 8 first bytes of the device descriptor 1860 * contains the maximum packet size to use on control endpoint 1861 * 0. If this value is different from "USB_MAX_IPACKET" a new 1862 * USB control request will be setup! 1863 */ 1864 switch (udev->speed) { 1865 case USB_SPEED_FULL: 1866 case USB_SPEED_LOW: 1867 err = usbd_req_get_desc(udev, mtx, NULL, &udev->ddesc, 1868 USB_MAX_IPACKET, USB_MAX_IPACKET, 0, UDESC_DEVICE, 0, 0); 1869 if (err != 0) { 1870 DPRINTFN(0, "getting device descriptor " 1871 "at addr %d failed, %s\n", udev->address, 1872 usbd_errstr(err)); 1873 return (err); 1874 } 1875 break; 1876 default: 1877 DPRINTF("Minimum MaxPacketSize is large enough " 1878 "to hold the complete device descriptor\n"); 1879 break; 1880 } 1881 1882 /* get the full device descriptor */ 1883 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1884 1885 /* try one more time, if error */ 1886 if (err) 1887 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1888 1889 if (err) { 1890 DPRINTF("addr=%d, getting full desc failed\n", 1891 udev->address); 1892 return (err); 1893 } 1894 1895 DPRINTF("adding unit addr=%d, rev=%02x, class=%d, " 1896 "subclass=%d, protocol=%d, maxpacket=%d, len=%d, speed=%d\n", 1897 udev->address, UGETW(udev->ddesc.bcdUSB), 1898 udev->ddesc.bDeviceClass, 1899 udev->ddesc.bDeviceSubClass, 1900 udev->ddesc.bDeviceProtocol, 1901 udev->ddesc.bMaxPacketSize, 1902 udev->ddesc.bLength, 1903 udev->speed); 1904 1905 return (err); 1906} 1907 1908/*------------------------------------------------------------------------* 1909 * usbd_req_re_enumerate 1910 * 1911 * NOTE: After this function returns the hardware is in the 1912 * unconfigured state! The application is responsible for setting a 1913 * new configuration. 1914 * 1915 * Returns: 1916 * 0: Success 1917 * Else: Failure 1918 *------------------------------------------------------------------------*/ 1919usb_error_t 1920usbd_req_re_enumerate(struct usb_device *udev, struct mtx *mtx) 1921{ 1922 struct usb_device *parent_hub; 1923 usb_error_t err; 1924 uint8_t old_addr; 1925 uint8_t do_retry = 1; 1926 1927 if (udev->flags.usb_mode != USB_MODE_HOST) { 1928 return (USB_ERR_INVAL); 1929 } 1930 old_addr = udev->address; 1931 parent_hub = udev->parent_hub; 1932 if (parent_hub == NULL) { 1933 return (USB_ERR_INVAL); 1934 } 1935retry: 1936 err = usbd_req_reset_port(parent_hub, mtx, udev->port_no); 1937 if (err) { 1938 DPRINTFN(0, "addr=%d, port reset failed, %s\n", 1939 old_addr, usbd_errstr(err)); 1940 goto done; 1941 } 1942 1943 /* 1944 * After that the port has been reset our device should be at 1945 * address zero: 1946 */ 1947 udev->address = USB_START_ADDR; 1948 1949 /* reset "bMaxPacketSize" */ 1950 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 1951 1952 /* reset USB state */ 1953 usb_set_device_state(udev, USB_STATE_POWERED); 1954 1955 /* 1956 * Restore device address: 1957 */ 1958 err = usbd_req_set_address(udev, mtx, old_addr); 1959 if (err) { 1960 /* XXX ignore any errors! */ 1961 DPRINTFN(0, "addr=%d, set address failed! (%s, ignored)\n", 1962 old_addr, usbd_errstr(err)); 1963 } 1964 /* 1965 * Restore device address, if the controller driver did not 1966 * set a new one: 1967 */ 1968 if (udev->address == USB_START_ADDR) 1969 udev->address = old_addr; 1970 1971 /* setup the device descriptor and the initial "wMaxPacketSize" */ 1972 err = usbd_setup_device_desc(udev, mtx); 1973 1974done: 1975 if (err && do_retry) { 1976 /* give the USB firmware some time to load */ 1977 usb_pause_mtx(mtx, hz / 2); 1978 /* no more retries after this retry */ 1979 do_retry = 0; 1980 /* try again */ 1981 goto retry; 1982 } 1983 /* restore address */ 1984 if (udev->address == USB_START_ADDR) 1985 udev->address = old_addr; 1986 /* update state, if successful */ 1987 if (err == 0) 1988 usb_set_device_state(udev, USB_STATE_ADDRESSED); 1989 return (err); 1990} 1991 1992/*------------------------------------------------------------------------* 1993 * usbd_req_clear_device_feature 1994 * 1995 * Returns: 1996 * 0: Success 1997 * Else: Failure 1998 *------------------------------------------------------------------------*/ 1999usb_error_t 2000usbd_req_clear_device_feature(struct usb_device *udev, struct mtx *mtx, 2001 uint16_t sel) 2002{ 2003 struct usb_device_request req; 2004 2005 req.bmRequestType = UT_WRITE_DEVICE; 2006 req.bRequest = UR_CLEAR_FEATURE; 2007 USETW(req.wValue, sel); 2008 USETW(req.wIndex, 0); 2009 USETW(req.wLength, 0); 2010 return (usbd_do_request(udev, mtx, &req, 0)); 2011} 2012 2013/*------------------------------------------------------------------------* 2014 * usbd_req_set_device_feature 2015 * 2016 * Returns: 2017 * 0: Success 2018 * Else: Failure 2019 *------------------------------------------------------------------------*/ 2020usb_error_t 2021usbd_req_set_device_feature(struct usb_device *udev, struct mtx *mtx, 2022 uint16_t sel) 2023{ 2024 struct usb_device_request req; 2025 2026 req.bmRequestType = UT_WRITE_DEVICE; 2027 req.bRequest = UR_SET_FEATURE; 2028 USETW(req.wValue, sel); 2029 USETW(req.wIndex, 0); 2030 USETW(req.wLength, 0); 2031 return (usbd_do_request(udev, mtx, &req, 0)); 2032} 2033