usb_device.h revision 193045
1/* $FreeBSD: head/sys/dev/usb/usb_device.h 193045 2009-05-29 18:46:57Z thompsa $ */ 2/*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27#ifndef _USB2_DEVICE_H_ 28#define _USB2_DEVICE_H_ 29 30struct usb_symlink; /* UGEN */ 31struct usb_device; /* linux compat */ 32 33#define USB_DEFAULT_XFER_MAX 2 34 35/* "usb2_parse_config()" commands */ 36 37#define USB_CFG_ALLOC 0 38#define USB_CFG_FREE 1 39#define USB_CFG_INIT 2 40 41/* "usb2_unconfigure()" flags */ 42 43#define USB_UNCFG_FLAG_NONE 0x00 44#define USB_UNCFG_FLAG_FREE_SUBDEV 0x01 /* subdevices are freed */ 45#define USB_UNCFG_FLAG_FREE_EP0 0x02 /* endpoint zero is freed */ 46 47struct usb_clear_stall_msg { 48 struct usb_proc_msg hdr; 49 struct usb_device *udev; 50}; 51 52/* The following four structures makes up a tree, where we have the 53 * leaf structure, "usb_host_endpoint", first, and the root structure, 54 * "usb_device", last. The four structures below mirror the structure 55 * of the USB descriptors belonging to an USB configuration. Please 56 * refer to the USB specification for a definition of "endpoints" and 57 * "interfaces". 58 */ 59struct usb_host_endpoint { 60 struct usb_endpoint_descriptor desc; 61 TAILQ_HEAD(, urb) bsd_urb_list; 62 struct usb_xfer *bsd_xfer[2]; 63 uint8_t *extra; /* Extra descriptors */ 64 usb_frlength_t fbsd_buf_size; 65 uint16_t extralen; 66 uint8_t bsd_iface_index; 67} __aligned(USB_HOST_ALIGN); 68 69struct usb_host_interface { 70 struct usb_interface_descriptor desc; 71 /* the following array has size "desc.bNumEndpoint" */ 72 struct usb_host_endpoint *endpoint; 73 const char *string; /* iInterface string, if present */ 74 uint8_t *extra; /* Extra descriptors */ 75 uint16_t extralen; 76 uint8_t bsd_iface_index; 77} __aligned(USB_HOST_ALIGN); 78 79/* 80 * The following structure defines an USB pipe which is equal to an 81 * USB endpoint. 82 */ 83struct usb_pipe { 84 struct usb_xfer_queue pipe_q; /* queue of USB transfers */ 85 86 struct usb_endpoint_descriptor *edesc; 87 struct usb_pipe_methods *methods; /* set by HC driver */ 88 89 uint16_t isoc_next; 90 uint16_t refcount; 91 92 uint8_t toggle_next:1; /* next data toggle value */ 93 uint8_t is_stalled:1; /* set if pipe is stalled */ 94 uint8_t is_synced:1; /* set if we a synchronised */ 95 uint8_t unused:5; 96 uint8_t iface_index; /* not used by "default pipe" */ 97}; 98 99/* 100 * The following structure defines an USB interface. 101 */ 102struct usb_interface { 103 struct usb_interface_descriptor *idesc; 104 device_t subdev; 105 uint8_t alt_index; 106 uint8_t parent_iface_index; 107 108 /* Linux compat */ 109 struct usb_host_interface *altsetting; 110 struct usb_host_interface *cur_altsetting; 111 struct usb_device *linux_udev; 112 void *bsd_priv_sc; /* device specific information */ 113 uint8_t num_altsetting; /* number of alternate settings */ 114 uint8_t bsd_iface_index; 115}; 116 117/* 118 * The following structure defines the USB device flags. 119 */ 120struct usb_device_flags { 121 enum usb_hc_mode usb_mode; /* host or device mode */ 122 uint8_t self_powered:1; /* set if USB device is self powered */ 123 uint8_t no_strings:1; /* set if USB device does not support 124 * strings */ 125 uint8_t remote_wakeup:1; /* set if remote wakeup is enabled */ 126 uint8_t uq_bus_powered:1; /* set if BUS powered quirk is present */ 127 128 /* 129 * NOTE: Although the flags below will reach the same value 130 * over time, but the instant values may differ, and 131 * consequently the flags cannot be merged into one! 132 */ 133 uint8_t peer_suspended:1; /* set if peer is suspended */ 134 uint8_t self_suspended:1; /* set if self is suspended */ 135}; 136 137/* 138 * The following structure is used for power-save purposes. The data 139 * in this structure is protected by the USB BUS lock. 140 */ 141struct usb_power_save { 142 usb_ticks_t last_xfer_time; /* copy of "ticks" */ 143 size_t type_refs[4]; /* transfer reference count */ 144 size_t read_refs; /* data read references */ 145 size_t write_refs; /* data write references */ 146}; 147 148/* 149 * The following structure defines an USB device. There exists one of 150 * these structures for every USB device. 151 */ 152struct usb_device { 153 struct usb_clear_stall_msg cs_msg[2]; /* generic clear stall 154 * messages */ 155 struct sx default_sx[2]; 156 struct mtx default_mtx[1]; 157 struct cv default_cv[2]; 158 struct usb_interface *ifaces; 159 struct usb_pipe default_pipe; /* Control Endpoint 0 */ 160 struct usb_pipe *pipes; 161 struct usb_power_save pwr_save;/* power save data */ 162 struct usb_bus *bus; /* our USB BUS */ 163 device_t parent_dev; /* parent device */ 164 struct usb_device *parent_hub; 165 struct usb_device *parent_hs_hub; /* high-speed parent HUB */ 166 struct usb_config_descriptor *cdesc; /* full config descr */ 167 struct usb_hub *hub; /* only if this is a hub */ 168 struct usb_xfer *default_xfer[USB_DEFAULT_XFER_MAX]; 169 struct usb_temp_data *usb2_template_ptr; 170 struct usb_pipe *pipe_curr; /* current clear stall pipe */ 171#if USB_HAVE_UGEN 172 struct usb_fifo *fifo[USB_FIFO_MAX]; 173 struct usb_symlink *ugen_symlink; /* our generic symlink */ 174 struct cdev *default_dev; /* Control Endpoint 0 device node */ 175 LIST_HEAD(,usb_fs_privdata) pd_list; 176 char ugen_name[20]; /* name of ugenX.X device */ 177#endif 178 usb_ticks_t plugtime; /* copy of "ticks" */ 179 180 enum usb_dev_state state; 181 enum usb_dev_speed speed; 182 uint16_t refcount; 183#define USB_DEV_REF_MAX 0xffff 184 185 uint16_t power; /* mA the device uses */ 186 uint16_t langid; /* language for strings */ 187 188 uint8_t address; /* device addess */ 189 uint8_t device_index; /* device index in "bus->devices" */ 190 uint8_t curr_config_index; /* current configuration index */ 191 uint8_t curr_config_no; /* current configuration number */ 192 uint8_t depth; /* distance from root HUB */ 193 uint8_t port_index; /* parent HUB port index */ 194 uint8_t port_no; /* parent HUB port number */ 195 uint8_t hs_hub_addr; /* high-speed HUB address */ 196 uint8_t hs_port_no; /* high-speed HUB port number */ 197 uint8_t driver_added_refcount; /* our driver added generation count */ 198 uint8_t power_mode; /* see USB_POWER_XXX */ 199 uint8_t ifaces_max; /* number of interfaces present */ 200 uint8_t pipes_max; /* number of pipes present */ 201 202 /* the "flags" field is write-protected by "bus->mtx" */ 203 204 struct usb_device_flags flags; 205 206 struct usb_endpoint_descriptor default_ep_desc; /* for pipe 0 */ 207 struct usb_device_descriptor ddesc; /* device descriptor */ 208 209 char *serial; /* serial number */ 210 char *manufacturer; /* manufacturer string */ 211 char *product; /* product string */ 212 213#if USB_HAVE_COMPAT_LINUX 214 /* Linux compat */ 215 struct usb_device_descriptor descriptor; 216 struct usb_host_endpoint ep0; 217 struct usb_interface *linux_iface_start; 218 struct usb_interface *linux_iface_end; 219 struct usb_host_endpoint *linux_endpoint_start; 220 struct usb_host_endpoint *linux_endpoint_end; 221 uint16_t devnum; 222#endif 223}; 224 225/* globals */ 226 227extern int usb2_template; 228 229/* function prototypes */ 230 231struct usb_device *usb2_alloc_device(device_t parent_dev, struct usb_bus *bus, 232 struct usb_device *parent_hub, uint8_t depth, 233 uint8_t port_index, uint8_t port_no, 234 enum usb_dev_speed speed, enum usb_hc_mode mode); 235struct usb_pipe *usb2_get_pipe(struct usb_device *udev, uint8_t iface_index, 236 const struct usb_config *setup); 237struct usb_pipe *usb2_get_pipe_by_addr(struct usb_device *udev, uint8_t ea_val); 238usb_error_t usb2_interface_count(struct usb_device *udev, uint8_t *count); 239usb_error_t usb2_probe_and_attach(struct usb_device *udev, 240 uint8_t iface_index); 241usb_error_t usb2_reset_iface_endpoints(struct usb_device *udev, 242 uint8_t iface_index); 243usb_error_t usb2_set_config_index(struct usb_device *udev, uint8_t index); 244usb_error_t usb2_set_endpoint_stall(struct usb_device *udev, 245 struct usb_pipe *pipe, uint8_t do_stall); 246usb_error_t usb2_suspend_resume(struct usb_device *udev, 247 uint8_t do_suspend); 248void usb2_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len); 249void usb2_free_device(struct usb_device *, uint8_t); 250void *usb2_find_descriptor(struct usb_device *udev, void *id, 251 uint8_t iface_index, uint8_t type, uint8_t type_mask, 252 uint8_t subtype, uint8_t subtype_mask); 253void usb_linux_free_device(struct usb_device *dev); 254uint8_t usb2_peer_can_wakeup(struct usb_device *udev); 255struct usb_pipe *usb2_pipe_foreach(struct usb_device *udev, struct usb_pipe *pipe); 256void usb2_set_device_state(struct usb_device *udev, 257 enum usb_dev_state state); 258 259#endif /* _USB2_DEVICE_H_ */ 260