i40e_adminq.c revision 279033
1/****************************************************************************** 2 3 Copyright (c) 2013-2015, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32******************************************************************************/ 33/*$FreeBSD: head/sys/dev/ixl/i40e_adminq.c 279033 2015-02-20 00:40:26Z jfv $*/ 34 35#include "i40e_status.h" 36#include "i40e_type.h" 37#include "i40e_register.h" 38#include "i40e_adminq.h" 39#include "i40e_prototype.h" 40 41/** 42 * i40e_is_nvm_update_op - return TRUE if this is an NVM update operation 43 * @desc: API request descriptor 44 **/ 45static INLINE bool i40e_is_nvm_update_op(struct i40e_aq_desc *desc) 46{ 47 return (desc->opcode == CPU_TO_LE16(i40e_aqc_opc_nvm_erase) || 48 desc->opcode == CPU_TO_LE16(i40e_aqc_opc_nvm_update)); 49} 50 51/** 52 * i40e_adminq_init_regs - Initialize AdminQ registers 53 * @hw: pointer to the hardware structure 54 * 55 * This assumes the alloc_asq and alloc_arq functions have already been called 56 **/ 57static void i40e_adminq_init_regs(struct i40e_hw *hw) 58{ 59 /* set head and tail registers in our local struct */ 60 if (i40e_is_vf(hw)) { 61 hw->aq.asq.tail = I40E_VF_ATQT1; 62 hw->aq.asq.head = I40E_VF_ATQH1; 63 hw->aq.asq.len = I40E_VF_ATQLEN1; 64 hw->aq.asq.bal = I40E_VF_ATQBAL1; 65 hw->aq.asq.bah = I40E_VF_ATQBAH1; 66 hw->aq.arq.tail = I40E_VF_ARQT1; 67 hw->aq.arq.head = I40E_VF_ARQH1; 68 hw->aq.arq.len = I40E_VF_ARQLEN1; 69 hw->aq.arq.bal = I40E_VF_ARQBAL1; 70 hw->aq.arq.bah = I40E_VF_ARQBAH1; 71 } else { 72 hw->aq.asq.tail = I40E_PF_ATQT; 73 hw->aq.asq.head = I40E_PF_ATQH; 74 hw->aq.asq.len = I40E_PF_ATQLEN; 75 hw->aq.asq.bal = I40E_PF_ATQBAL; 76 hw->aq.asq.bah = I40E_PF_ATQBAH; 77 hw->aq.arq.tail = I40E_PF_ARQT; 78 hw->aq.arq.head = I40E_PF_ARQH; 79 hw->aq.arq.len = I40E_PF_ARQLEN; 80 hw->aq.arq.bal = I40E_PF_ARQBAL; 81 hw->aq.arq.bah = I40E_PF_ARQBAH; 82 } 83} 84 85/** 86 * i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings 87 * @hw: pointer to the hardware structure 88 **/ 89enum i40e_status_code i40e_alloc_adminq_asq_ring(struct i40e_hw *hw) 90{ 91 enum i40e_status_code ret_code; 92 93 ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq.desc_buf, 94 i40e_mem_atq_ring, 95 (hw->aq.num_asq_entries * 96 sizeof(struct i40e_aq_desc)), 97 I40E_ADMINQ_DESC_ALIGNMENT); 98 if (ret_code) 99 return ret_code; 100 101 ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.cmd_buf, 102 (hw->aq.num_asq_entries * 103 sizeof(struct i40e_asq_cmd_details))); 104 if (ret_code) { 105 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf); 106 return ret_code; 107 } 108 109 return ret_code; 110} 111 112/** 113 * i40e_alloc_adminq_arq_ring - Allocate Admin Queue receive rings 114 * @hw: pointer to the hardware structure 115 **/ 116enum i40e_status_code i40e_alloc_adminq_arq_ring(struct i40e_hw *hw) 117{ 118 enum i40e_status_code ret_code; 119 120 ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq.desc_buf, 121 i40e_mem_arq_ring, 122 (hw->aq.num_arq_entries * 123 sizeof(struct i40e_aq_desc)), 124 I40E_ADMINQ_DESC_ALIGNMENT); 125 126 return ret_code; 127} 128 129/** 130 * i40e_free_adminq_asq - Free Admin Queue send rings 131 * @hw: pointer to the hardware structure 132 * 133 * This assumes the posted send buffers have already been cleaned 134 * and de-allocated 135 **/ 136void i40e_free_adminq_asq(struct i40e_hw *hw) 137{ 138 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf); 139} 140 141/** 142 * i40e_free_adminq_arq - Free Admin Queue receive rings 143 * @hw: pointer to the hardware structure 144 * 145 * This assumes the posted receive buffers have already been cleaned 146 * and de-allocated 147 **/ 148void i40e_free_adminq_arq(struct i40e_hw *hw) 149{ 150 i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf); 151} 152 153/** 154 * i40e_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue 155 * @hw: pointer to the hardware structure 156 **/ 157static enum i40e_status_code i40e_alloc_arq_bufs(struct i40e_hw *hw) 158{ 159 enum i40e_status_code ret_code; 160 struct i40e_aq_desc *desc; 161 struct i40e_dma_mem *bi; 162 int i; 163 164 /* We'll be allocating the buffer info memory first, then we can 165 * allocate the mapped buffers for the event processing 166 */ 167 168 /* buffer_info structures do not need alignment */ 169 ret_code = i40e_allocate_virt_mem(hw, &hw->aq.arq.dma_head, 170 (hw->aq.num_arq_entries * sizeof(struct i40e_dma_mem))); 171 if (ret_code) 172 goto alloc_arq_bufs; 173 hw->aq.arq.r.arq_bi = (struct i40e_dma_mem *)hw->aq.arq.dma_head.va; 174 175 /* allocate the mapped buffers */ 176 for (i = 0; i < hw->aq.num_arq_entries; i++) { 177 bi = &hw->aq.arq.r.arq_bi[i]; 178 ret_code = i40e_allocate_dma_mem(hw, bi, 179 i40e_mem_arq_buf, 180 hw->aq.arq_buf_size, 181 I40E_ADMINQ_DESC_ALIGNMENT); 182 if (ret_code) 183 goto unwind_alloc_arq_bufs; 184 185 /* now configure the descriptors for use */ 186 desc = I40E_ADMINQ_DESC(hw->aq.arq, i); 187 188 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF); 189 if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF) 190 desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB); 191 desc->opcode = 0; 192 /* This is in accordance with Admin queue design, there is no 193 * register for buffer size configuration 194 */ 195 desc->datalen = CPU_TO_LE16((u16)bi->size); 196 desc->retval = 0; 197 desc->cookie_high = 0; 198 desc->cookie_low = 0; 199 desc->params.external.addr_high = 200 CPU_TO_LE32(I40E_HI_DWORD(bi->pa)); 201 desc->params.external.addr_low = 202 CPU_TO_LE32(I40E_LO_DWORD(bi->pa)); 203 desc->params.external.param0 = 0; 204 desc->params.external.param1 = 0; 205 } 206 207alloc_arq_bufs: 208 return ret_code; 209 210unwind_alloc_arq_bufs: 211 /* don't try to free the one that failed... */ 212 i--; 213 for (; i >= 0; i--) 214 i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]); 215 i40e_free_virt_mem(hw, &hw->aq.arq.dma_head); 216 217 return ret_code; 218} 219 220/** 221 * i40e_alloc_asq_bufs - Allocate empty buffer structs for the send queue 222 * @hw: pointer to the hardware structure 223 **/ 224static enum i40e_status_code i40e_alloc_asq_bufs(struct i40e_hw *hw) 225{ 226 enum i40e_status_code ret_code; 227 struct i40e_dma_mem *bi; 228 int i; 229 230 /* No mapped memory needed yet, just the buffer info structures */ 231 ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.dma_head, 232 (hw->aq.num_asq_entries * sizeof(struct i40e_dma_mem))); 233 if (ret_code) 234 goto alloc_asq_bufs; 235 hw->aq.asq.r.asq_bi = (struct i40e_dma_mem *)hw->aq.asq.dma_head.va; 236 237 /* allocate the mapped buffers */ 238 for (i = 0; i < hw->aq.num_asq_entries; i++) { 239 bi = &hw->aq.asq.r.asq_bi[i]; 240 ret_code = i40e_allocate_dma_mem(hw, bi, 241 i40e_mem_asq_buf, 242 hw->aq.asq_buf_size, 243 I40E_ADMINQ_DESC_ALIGNMENT); 244 if (ret_code) 245 goto unwind_alloc_asq_bufs; 246 } 247alloc_asq_bufs: 248 return ret_code; 249 250unwind_alloc_asq_bufs: 251 /* don't try to free the one that failed... */ 252 i--; 253 for (; i >= 0; i--) 254 i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]); 255 i40e_free_virt_mem(hw, &hw->aq.asq.dma_head); 256 257 return ret_code; 258} 259 260/** 261 * i40e_free_arq_bufs - Free receive queue buffer info elements 262 * @hw: pointer to the hardware structure 263 **/ 264static void i40e_free_arq_bufs(struct i40e_hw *hw) 265{ 266 int i; 267 268 /* free descriptors */ 269 for (i = 0; i < hw->aq.num_arq_entries; i++) 270 i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]); 271 272 /* free the descriptor memory */ 273 i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf); 274 275 /* free the dma header */ 276 i40e_free_virt_mem(hw, &hw->aq.arq.dma_head); 277} 278 279/** 280 * i40e_free_asq_bufs - Free send queue buffer info elements 281 * @hw: pointer to the hardware structure 282 **/ 283static void i40e_free_asq_bufs(struct i40e_hw *hw) 284{ 285 int i; 286 287 /* only unmap if the address is non-NULL */ 288 for (i = 0; i < hw->aq.num_asq_entries; i++) 289 if (hw->aq.asq.r.asq_bi[i].pa) 290 i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]); 291 292 /* free the buffer info list */ 293 i40e_free_virt_mem(hw, &hw->aq.asq.cmd_buf); 294 295 /* free the descriptor memory */ 296 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf); 297 298 /* free the dma header */ 299 i40e_free_virt_mem(hw, &hw->aq.asq.dma_head); 300} 301 302/** 303 * i40e_config_asq_regs - configure ASQ registers 304 * @hw: pointer to the hardware structure 305 * 306 * Configure base address and length registers for the transmit queue 307 **/ 308static enum i40e_status_code i40e_config_asq_regs(struct i40e_hw *hw) 309{ 310 enum i40e_status_code ret_code = I40E_SUCCESS; 311 u32 reg = 0; 312 313 /* Clear Head and Tail */ 314 wr32(hw, hw->aq.asq.head, 0); 315 wr32(hw, hw->aq.asq.tail, 0); 316 317 /* set starting point */ 318 wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries | 319 I40E_PF_ATQLEN_ATQENABLE_MASK)); 320 wr32(hw, hw->aq.asq.bal, I40E_LO_DWORD(hw->aq.asq.desc_buf.pa)); 321 wr32(hw, hw->aq.asq.bah, I40E_HI_DWORD(hw->aq.asq.desc_buf.pa)); 322 323 /* Check one register to verify that config was applied */ 324 reg = rd32(hw, hw->aq.asq.bal); 325 if (reg != I40E_LO_DWORD(hw->aq.asq.desc_buf.pa)) 326 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR; 327 328 return ret_code; 329} 330 331/** 332 * i40e_config_arq_regs - ARQ register configuration 333 * @hw: pointer to the hardware structure 334 * 335 * Configure base address and length registers for the receive (event queue) 336 **/ 337static enum i40e_status_code i40e_config_arq_regs(struct i40e_hw *hw) 338{ 339 enum i40e_status_code ret_code = I40E_SUCCESS; 340 u32 reg = 0; 341 342 /* Clear Head and Tail */ 343 wr32(hw, hw->aq.arq.head, 0); 344 wr32(hw, hw->aq.arq.tail, 0); 345 346 /* set starting point */ 347 wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries | 348 I40E_PF_ARQLEN_ARQENABLE_MASK)); 349 wr32(hw, hw->aq.arq.bal, I40E_LO_DWORD(hw->aq.arq.desc_buf.pa)); 350 wr32(hw, hw->aq.arq.bah, I40E_HI_DWORD(hw->aq.arq.desc_buf.pa)); 351 352 /* Update tail in the HW to post pre-allocated buffers */ 353 wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1); 354 355 /* Check one register to verify that config was applied */ 356 reg = rd32(hw, hw->aq.arq.bal); 357 if (reg != I40E_LO_DWORD(hw->aq.arq.desc_buf.pa)) 358 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR; 359 360 return ret_code; 361} 362 363/** 364 * i40e_init_asq - main initialization routine for ASQ 365 * @hw: pointer to the hardware structure 366 * 367 * This is the main initialization routine for the Admin Send Queue 368 * Prior to calling this function, drivers *MUST* set the following fields 369 * in the hw->aq structure: 370 * - hw->aq.num_asq_entries 371 * - hw->aq.arq_buf_size 372 * 373 * Do *NOT* hold the lock when calling this as the memory allocation routines 374 * called are not going to be atomic context safe 375 **/ 376enum i40e_status_code i40e_init_asq(struct i40e_hw *hw) 377{ 378 enum i40e_status_code ret_code = I40E_SUCCESS; 379 380 if (hw->aq.asq.count > 0) { 381 /* queue already initialized */ 382 ret_code = I40E_ERR_NOT_READY; 383 goto init_adminq_exit; 384 } 385 386 /* verify input for valid configuration */ 387 if ((hw->aq.num_asq_entries == 0) || 388 (hw->aq.asq_buf_size == 0)) { 389 ret_code = I40E_ERR_CONFIG; 390 goto init_adminq_exit; 391 } 392 393 hw->aq.asq.next_to_use = 0; 394 hw->aq.asq.next_to_clean = 0; 395 hw->aq.asq.count = hw->aq.num_asq_entries; 396 397 /* allocate the ring memory */ 398 ret_code = i40e_alloc_adminq_asq_ring(hw); 399 if (ret_code != I40E_SUCCESS) 400 goto init_adminq_exit; 401 402 /* allocate buffers in the rings */ 403 ret_code = i40e_alloc_asq_bufs(hw); 404 if (ret_code != I40E_SUCCESS) 405 goto init_adminq_free_rings; 406 407 /* initialize base registers */ 408 ret_code = i40e_config_asq_regs(hw); 409 if (ret_code != I40E_SUCCESS) 410 goto init_adminq_free_rings; 411 412 /* success! */ 413 goto init_adminq_exit; 414 415init_adminq_free_rings: 416 i40e_free_adminq_asq(hw); 417 418init_adminq_exit: 419 return ret_code; 420} 421 422/** 423 * i40e_init_arq - initialize ARQ 424 * @hw: pointer to the hardware structure 425 * 426 * The main initialization routine for the Admin Receive (Event) Queue. 427 * Prior to calling this function, drivers *MUST* set the following fields 428 * in the hw->aq structure: 429 * - hw->aq.num_asq_entries 430 * - hw->aq.arq_buf_size 431 * 432 * Do *NOT* hold the lock when calling this as the memory allocation routines 433 * called are not going to be atomic context safe 434 **/ 435enum i40e_status_code i40e_init_arq(struct i40e_hw *hw) 436{ 437 enum i40e_status_code ret_code = I40E_SUCCESS; 438 439 if (hw->aq.arq.count > 0) { 440 /* queue already initialized */ 441 ret_code = I40E_ERR_NOT_READY; 442 goto init_adminq_exit; 443 } 444 445 /* verify input for valid configuration */ 446 if ((hw->aq.num_arq_entries == 0) || 447 (hw->aq.arq_buf_size == 0)) { 448 ret_code = I40E_ERR_CONFIG; 449 goto init_adminq_exit; 450 } 451 452 hw->aq.arq.next_to_use = 0; 453 hw->aq.arq.next_to_clean = 0; 454 hw->aq.arq.count = hw->aq.num_arq_entries; 455 456 /* allocate the ring memory */ 457 ret_code = i40e_alloc_adminq_arq_ring(hw); 458 if (ret_code != I40E_SUCCESS) 459 goto init_adminq_exit; 460 461 /* allocate buffers in the rings */ 462 ret_code = i40e_alloc_arq_bufs(hw); 463 if (ret_code != I40E_SUCCESS) 464 goto init_adminq_free_rings; 465 466 /* initialize base registers */ 467 ret_code = i40e_config_arq_regs(hw); 468 if (ret_code != I40E_SUCCESS) 469 goto init_adminq_free_rings; 470 471 /* success! */ 472 goto init_adminq_exit; 473 474init_adminq_free_rings: 475 i40e_free_adminq_arq(hw); 476 477init_adminq_exit: 478 return ret_code; 479} 480 481/** 482 * i40e_shutdown_asq - shutdown the ASQ 483 * @hw: pointer to the hardware structure 484 * 485 * The main shutdown routine for the Admin Send Queue 486 **/ 487enum i40e_status_code i40e_shutdown_asq(struct i40e_hw *hw) 488{ 489 enum i40e_status_code ret_code = I40E_SUCCESS; 490 491 if (hw->aq.asq.count == 0) 492 return I40E_ERR_NOT_READY; 493 494 /* Stop firmware AdminQ processing */ 495 wr32(hw, hw->aq.asq.head, 0); 496 wr32(hw, hw->aq.asq.tail, 0); 497 wr32(hw, hw->aq.asq.len, 0); 498 wr32(hw, hw->aq.asq.bal, 0); 499 wr32(hw, hw->aq.asq.bah, 0); 500 501 /* make sure spinlock is available */ 502 i40e_acquire_spinlock(&hw->aq.asq_spinlock); 503 504 hw->aq.asq.count = 0; /* to indicate uninitialized queue */ 505 506 /* free ring buffers */ 507 i40e_free_asq_bufs(hw); 508 509 i40e_release_spinlock(&hw->aq.asq_spinlock); 510 511 return ret_code; 512} 513 514/** 515 * i40e_shutdown_arq - shutdown ARQ 516 * @hw: pointer to the hardware structure 517 * 518 * The main shutdown routine for the Admin Receive Queue 519 **/ 520enum i40e_status_code i40e_shutdown_arq(struct i40e_hw *hw) 521{ 522 enum i40e_status_code ret_code = I40E_SUCCESS; 523 524 if (hw->aq.arq.count == 0) 525 return I40E_ERR_NOT_READY; 526 527 /* Stop firmware AdminQ processing */ 528 wr32(hw, hw->aq.arq.head, 0); 529 wr32(hw, hw->aq.arq.tail, 0); 530 wr32(hw, hw->aq.arq.len, 0); 531 wr32(hw, hw->aq.arq.bal, 0); 532 wr32(hw, hw->aq.arq.bah, 0); 533 534 /* make sure spinlock is available */ 535 i40e_acquire_spinlock(&hw->aq.arq_spinlock); 536 537 hw->aq.arq.count = 0; /* to indicate uninitialized queue */ 538 539 /* free ring buffers */ 540 i40e_free_arq_bufs(hw); 541 542 i40e_release_spinlock(&hw->aq.arq_spinlock); 543 544 return ret_code; 545} 546 547/** 548 * i40e_init_adminq - main initialization routine for Admin Queue 549 * @hw: pointer to the hardware structure 550 * 551 * Prior to calling this function, drivers *MUST* set the following fields 552 * in the hw->aq structure: 553 * - hw->aq.num_asq_entries 554 * - hw->aq.num_arq_entries 555 * - hw->aq.arq_buf_size 556 * - hw->aq.asq_buf_size 557 **/ 558enum i40e_status_code i40e_init_adminq(struct i40e_hw *hw) 559{ 560 enum i40e_status_code ret_code; 561 u16 eetrack_lo, eetrack_hi; 562 int retry = 0; 563 /* verify input for valid configuration */ 564 if ((hw->aq.num_arq_entries == 0) || 565 (hw->aq.num_asq_entries == 0) || 566 (hw->aq.arq_buf_size == 0) || 567 (hw->aq.asq_buf_size == 0)) { 568 ret_code = I40E_ERR_CONFIG; 569 goto init_adminq_exit; 570 } 571 572 /* initialize spin locks */ 573 i40e_init_spinlock(&hw->aq.asq_spinlock); 574 i40e_init_spinlock(&hw->aq.arq_spinlock); 575 576 /* Set up register offsets */ 577 i40e_adminq_init_regs(hw); 578 579 /* setup ASQ command write back timeout */ 580 hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT; 581 582 /* allocate the ASQ */ 583 ret_code = i40e_init_asq(hw); 584 if (ret_code != I40E_SUCCESS) 585 goto init_adminq_destroy_spinlocks; 586 587 /* allocate the ARQ */ 588 ret_code = i40e_init_arq(hw); 589 if (ret_code != I40E_SUCCESS) 590 goto init_adminq_free_asq; 591 592 /* VF has no need of firmware */ 593 if (i40e_is_vf(hw)) 594 goto init_adminq_exit; 595 /* There are some cases where the firmware may not be quite ready 596 * for AdminQ operations, so we retry the AdminQ setup a few times 597 * if we see timeouts in this first AQ call. 598 */ 599 do { 600 ret_code = i40e_aq_get_firmware_version(hw, 601 &hw->aq.fw_maj_ver, 602 &hw->aq.fw_min_ver, 603 &hw->aq.fw_build, 604 &hw->aq.api_maj_ver, 605 &hw->aq.api_min_ver, 606 NULL); 607 if (ret_code != I40E_ERR_ADMIN_QUEUE_TIMEOUT) 608 break; 609 retry++; 610 i40e_msec_delay(100); 611 i40e_resume_aq(hw); 612 } while (retry < 10); 613 if (ret_code != I40E_SUCCESS) 614 goto init_adminq_free_arq; 615 616 /* get the NVM version info */ 617 i40e_read_nvm_word(hw, I40E_SR_NVM_DEV_STARTER_VERSION, 618 &hw->nvm.version); 619 i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_LO, &eetrack_lo); 620 i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_HI, &eetrack_hi); 621 hw->nvm.eetrack = (eetrack_hi << 16) | eetrack_lo; 622 623 if (hw->aq.api_maj_ver > I40E_FW_API_VERSION_MAJOR) { 624 ret_code = I40E_ERR_FIRMWARE_API_VERSION; 625 goto init_adminq_free_arq; 626 } 627 628 /* pre-emptive resource lock release */ 629 i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL); 630 hw->aq.nvm_release_on_done = FALSE; 631 hw->nvmupd_state = I40E_NVMUPD_STATE_INIT; 632 633 ret_code = i40e_aq_set_hmc_resource_profile(hw, 634 I40E_HMC_PROFILE_DEFAULT, 635 0, 636 NULL); 637 ret_code = I40E_SUCCESS; 638 639 /* success! */ 640 goto init_adminq_exit; 641 642init_adminq_free_arq: 643 i40e_shutdown_arq(hw); 644init_adminq_free_asq: 645 i40e_shutdown_asq(hw); 646init_adminq_destroy_spinlocks: 647 i40e_destroy_spinlock(&hw->aq.asq_spinlock); 648 i40e_destroy_spinlock(&hw->aq.arq_spinlock); 649 650init_adminq_exit: 651 return ret_code; 652} 653 654/** 655 * i40e_shutdown_adminq - shutdown routine for the Admin Queue 656 * @hw: pointer to the hardware structure 657 **/ 658enum i40e_status_code i40e_shutdown_adminq(struct i40e_hw *hw) 659{ 660 enum i40e_status_code ret_code = I40E_SUCCESS; 661 662 if (i40e_check_asq_alive(hw)) 663 i40e_aq_queue_shutdown(hw, TRUE); 664 665 i40e_shutdown_asq(hw); 666 i40e_shutdown_arq(hw); 667 668 /* destroy the spinlocks */ 669 i40e_destroy_spinlock(&hw->aq.asq_spinlock); 670 i40e_destroy_spinlock(&hw->aq.arq_spinlock); 671 672 return ret_code; 673} 674 675/** 676 * i40e_clean_asq - cleans Admin send queue 677 * @hw: pointer to the hardware structure 678 * 679 * returns the number of free desc 680 **/ 681u16 i40e_clean_asq(struct i40e_hw *hw) 682{ 683 struct i40e_adminq_ring *asq = &(hw->aq.asq); 684 struct i40e_asq_cmd_details *details; 685 u16 ntc = asq->next_to_clean; 686 struct i40e_aq_desc desc_cb; 687 struct i40e_aq_desc *desc; 688 689 desc = I40E_ADMINQ_DESC(*asq, ntc); 690 details = I40E_ADMINQ_DETAILS(*asq, ntc); 691 while (rd32(hw, hw->aq.asq.head) != ntc) { 692 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 693 "%s: ntc %d head %d.\n", __FUNCTION__, ntc, 694 rd32(hw, hw->aq.asq.head)); 695 696 if (details->callback) { 697 I40E_ADMINQ_CALLBACK cb_func = 698 (I40E_ADMINQ_CALLBACK)details->callback; 699 i40e_memcpy(&desc_cb, desc, 700 sizeof(struct i40e_aq_desc), I40E_DMA_TO_DMA); 701 cb_func(hw, &desc_cb); 702 } 703 i40e_memset(desc, 0, sizeof(*desc), I40E_DMA_MEM); 704 i40e_memset(details, 0, sizeof(*details), I40E_NONDMA_MEM); 705 ntc++; 706 if (ntc == asq->count) 707 ntc = 0; 708 desc = I40E_ADMINQ_DESC(*asq, ntc); 709 details = I40E_ADMINQ_DETAILS(*asq, ntc); 710 } 711 712 asq->next_to_clean = ntc; 713 714 return I40E_DESC_UNUSED(asq); 715} 716 717/** 718 * i40e_asq_done - check if FW has processed the Admin Send Queue 719 * @hw: pointer to the hw struct 720 * 721 * Returns TRUE if the firmware has processed all descriptors on the 722 * admin send queue. Returns FALSE if there are still requests pending. 723 **/ 724bool i40e_asq_done(struct i40e_hw *hw) 725{ 726 /* AQ designers suggest use of head for better 727 * timing reliability than DD bit 728 */ 729 return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use; 730 731} 732 733/** 734 * i40e_asq_send_command - send command to Admin Queue 735 * @hw: pointer to the hw struct 736 * @desc: prefilled descriptor describing the command (non DMA mem) 737 * @buff: buffer to use for indirect commands 738 * @buff_size: size of buffer for indirect commands 739 * @cmd_details: pointer to command details structure 740 * 741 * This is the main send command driver routine for the Admin Queue send 742 * queue. It runs the queue, cleans the queue, etc 743 **/ 744enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw, 745 struct i40e_aq_desc *desc, 746 void *buff, /* can be NULL */ 747 u16 buff_size, 748 struct i40e_asq_cmd_details *cmd_details) 749{ 750 enum i40e_status_code status = I40E_SUCCESS; 751 struct i40e_dma_mem *dma_buff = NULL; 752 struct i40e_asq_cmd_details *details; 753 struct i40e_aq_desc *desc_on_ring; 754 bool cmd_completed = FALSE; 755 u16 retval = 0; 756 u32 val = 0; 757 758 val = rd32(hw, hw->aq.asq.head); 759 if (val >= hw->aq.num_asq_entries) { 760 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 761 "AQTX: head overrun at %d\n", val); 762 status = I40E_ERR_QUEUE_EMPTY; 763 goto asq_send_command_exit; 764 } 765 766 if (hw->aq.asq.count == 0) { 767 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 768 "AQTX: Admin queue not initialized.\n"); 769 status = I40E_ERR_QUEUE_EMPTY; 770 goto asq_send_command_exit; 771 } 772 773 details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use); 774 if (cmd_details) { 775 i40e_memcpy(details, 776 cmd_details, 777 sizeof(struct i40e_asq_cmd_details), 778 I40E_NONDMA_TO_NONDMA); 779 780 /* If the cmd_details are defined copy the cookie. The 781 * CPU_TO_LE32 is not needed here because the data is ignored 782 * by the FW, only used by the driver 783 */ 784 if (details->cookie) { 785 desc->cookie_high = 786 CPU_TO_LE32(I40E_HI_DWORD(details->cookie)); 787 desc->cookie_low = 788 CPU_TO_LE32(I40E_LO_DWORD(details->cookie)); 789 } 790 } else { 791 i40e_memset(details, 0, 792 sizeof(struct i40e_asq_cmd_details), 793 I40E_NONDMA_MEM); 794 } 795 796 /* clear requested flags and then set additional flags if defined */ 797 desc->flags &= ~CPU_TO_LE16(details->flags_dis); 798 desc->flags |= CPU_TO_LE16(details->flags_ena); 799 800 i40e_acquire_spinlock(&hw->aq.asq_spinlock); 801 802 if (buff_size > hw->aq.asq_buf_size) { 803 i40e_debug(hw, 804 I40E_DEBUG_AQ_MESSAGE, 805 "AQTX: Invalid buffer size: %d.\n", 806 buff_size); 807 status = I40E_ERR_INVALID_SIZE; 808 goto asq_send_command_error; 809 } 810 811 if (details->postpone && !details->async) { 812 i40e_debug(hw, 813 I40E_DEBUG_AQ_MESSAGE, 814 "AQTX: Async flag not set along with postpone flag"); 815 status = I40E_ERR_PARAM; 816 goto asq_send_command_error; 817 } 818 819 /* call clean and check queue available function to reclaim the 820 * descriptors that were processed by FW, the function returns the 821 * number of desc available 822 */ 823 /* the clean function called here could be called in a separate thread 824 * in case of asynchronous completions 825 */ 826 if (i40e_clean_asq(hw) == 0) { 827 i40e_debug(hw, 828 I40E_DEBUG_AQ_MESSAGE, 829 "AQTX: Error queue is full.\n"); 830 status = I40E_ERR_ADMIN_QUEUE_FULL; 831 goto asq_send_command_error; 832 } 833 834 /* initialize the temp desc pointer with the right desc */ 835 desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use); 836 837 /* if the desc is available copy the temp desc to the right place */ 838 i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc), 839 I40E_NONDMA_TO_DMA); 840 841 /* if buff is not NULL assume indirect command */ 842 if (buff != NULL) { 843 dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]); 844 /* copy the user buff into the respective DMA buff */ 845 i40e_memcpy(dma_buff->va, buff, buff_size, 846 I40E_NONDMA_TO_DMA); 847 desc_on_ring->datalen = CPU_TO_LE16(buff_size); 848 849 /* Update the address values in the desc with the pa value 850 * for respective buffer 851 */ 852 desc_on_ring->params.external.addr_high = 853 CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa)); 854 desc_on_ring->params.external.addr_low = 855 CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa)); 856 } 857 858 /* bump the tail */ 859 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n"); 860 i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring, 861 buff, buff_size); 862 (hw->aq.asq.next_to_use)++; 863 if (hw->aq.asq.next_to_use == hw->aq.asq.count) 864 hw->aq.asq.next_to_use = 0; 865 if (!details->postpone) 866 wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use); 867 868 /* if cmd_details are not defined or async flag is not set, 869 * we need to wait for desc write back 870 */ 871 if (!details->async && !details->postpone) { 872 u32 total_delay = 0; 873 874 do { 875 /* AQ designers suggest use of head for better 876 * timing reliability than DD bit 877 */ 878 if (i40e_asq_done(hw)) 879 break; 880 /* ugh! delay while spin_lock */ 881 i40e_msec_delay(1); 882 total_delay++; 883 } while (total_delay < hw->aq.asq_cmd_timeout); 884 } 885 886 /* if ready, copy the desc back to temp */ 887 if (i40e_asq_done(hw)) { 888 i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc), 889 I40E_DMA_TO_NONDMA); 890 if (buff != NULL) 891 i40e_memcpy(buff, dma_buff->va, buff_size, 892 I40E_DMA_TO_NONDMA); 893 retval = LE16_TO_CPU(desc->retval); 894 if (retval != 0) { 895 i40e_debug(hw, 896 I40E_DEBUG_AQ_MESSAGE, 897 "AQTX: Command completed with error 0x%X.\n", 898 retval); 899 900 /* strip off FW internal code */ 901 retval &= 0xff; 902 } 903 cmd_completed = TRUE; 904 if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK) 905 status = I40E_SUCCESS; 906 else 907 status = I40E_ERR_ADMIN_QUEUE_ERROR; 908 hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval; 909 } 910 911 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 912 "AQTX: desc and buffer writeback:\n"); 913 i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size); 914 915 /* update the error if time out occurred */ 916 if ((!cmd_completed) && 917 (!details->async && !details->postpone)) { 918 i40e_debug(hw, 919 I40E_DEBUG_AQ_MESSAGE, 920 "AQTX: Writeback timeout.\n"); 921 status = I40E_ERR_ADMIN_QUEUE_TIMEOUT; 922 } 923 924asq_send_command_error: 925 i40e_release_spinlock(&hw->aq.asq_spinlock); 926asq_send_command_exit: 927 return status; 928} 929 930/** 931 * i40e_fill_default_direct_cmd_desc - AQ descriptor helper function 932 * @desc: pointer to the temp descriptor (non DMA mem) 933 * @opcode: the opcode can be used to decide which flags to turn off or on 934 * 935 * Fill the desc with default values 936 **/ 937void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc, 938 u16 opcode) 939{ 940 /* zero out the desc */ 941 i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), 942 I40E_NONDMA_MEM); 943 desc->opcode = CPU_TO_LE16(opcode); 944 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_SI); 945} 946 947/** 948 * i40e_clean_arq_element 949 * @hw: pointer to the hw struct 950 * @e: event info from the receive descriptor, includes any buffers 951 * @pending: number of events that could be left to process 952 * 953 * This function cleans one Admin Receive Queue element and returns 954 * the contents through e. It can also return how many events are 955 * left to process through 'pending' 956 **/ 957enum i40e_status_code i40e_clean_arq_element(struct i40e_hw *hw, 958 struct i40e_arq_event_info *e, 959 u16 *pending) 960{ 961 enum i40e_status_code ret_code = I40E_SUCCESS; 962 u16 ntc = hw->aq.arq.next_to_clean; 963 struct i40e_aq_desc *desc; 964 struct i40e_dma_mem *bi; 965 u16 desc_idx; 966 u16 datalen; 967 u16 flags; 968 u16 ntu; 969 970 /* take the lock before we start messing with the ring */ 971 i40e_acquire_spinlock(&hw->aq.arq_spinlock); 972 973 /* set next_to_use to head */ 974 ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK); 975 if (ntu == ntc) { 976 /* nothing to do - shouldn't need to update ring's values */ 977 ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK; 978 goto clean_arq_element_out; 979 } 980 981 /* now clean the next descriptor */ 982 desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc); 983 desc_idx = ntc; 984 985 flags = LE16_TO_CPU(desc->flags); 986 if (flags & I40E_AQ_FLAG_ERR) { 987 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR; 988 hw->aq.arq_last_status = 989 (enum i40e_admin_queue_err)LE16_TO_CPU(desc->retval); 990 i40e_debug(hw, 991 I40E_DEBUG_AQ_MESSAGE, 992 "AQRX: Event received with error 0x%X.\n", 993 hw->aq.arq_last_status); 994 } 995 996 i40e_memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc), 997 I40E_DMA_TO_NONDMA); 998 datalen = LE16_TO_CPU(desc->datalen); 999 e->msg_len = min(datalen, e->buf_len); 1000 if (e->msg_buf != NULL && (e->msg_len != 0)) 1001 i40e_memcpy(e->msg_buf, 1002 hw->aq.arq.r.arq_bi[desc_idx].va, 1003 e->msg_len, I40E_DMA_TO_NONDMA); 1004 1005 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n"); 1006 i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf, 1007 hw->aq.arq_buf_size); 1008 1009 /* Restore the original datalen and buffer address in the desc, 1010 * FW updates datalen to indicate the event message 1011 * size 1012 */ 1013 bi = &hw->aq.arq.r.arq_bi[ntc]; 1014 i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), I40E_DMA_MEM); 1015 1016 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF); 1017 if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF) 1018 desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB); 1019 desc->datalen = CPU_TO_LE16((u16)bi->size); 1020 desc->params.external.addr_high = CPU_TO_LE32(I40E_HI_DWORD(bi->pa)); 1021 desc->params.external.addr_low = CPU_TO_LE32(I40E_LO_DWORD(bi->pa)); 1022 1023 /* set tail = the last cleaned desc index. */ 1024 wr32(hw, hw->aq.arq.tail, ntc); 1025 /* ntc is updated to tail + 1 */ 1026 ntc++; 1027 if (ntc == hw->aq.num_arq_entries) 1028 ntc = 0; 1029 hw->aq.arq.next_to_clean = ntc; 1030 hw->aq.arq.next_to_use = ntu; 1031 1032clean_arq_element_out: 1033 /* Set pending if needed, unlock and return */ 1034 if (pending != NULL) 1035 *pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc); 1036 i40e_release_spinlock(&hw->aq.arq_spinlock); 1037 1038 if (i40e_is_nvm_update_op(&e->desc)) { 1039 if (hw->aq.nvm_release_on_done) { 1040 i40e_release_nvm(hw); 1041 hw->aq.nvm_release_on_done = FALSE; 1042 } 1043 } 1044 1045 return ret_code; 1046} 1047 1048void i40e_resume_aq(struct i40e_hw *hw) 1049{ 1050 /* Registers are reset after PF reset */ 1051 hw->aq.asq.next_to_use = 0; 1052 hw->aq.asq.next_to_clean = 0; 1053 1054#if (I40E_VF_ATQLEN_ATQENABLE_MASK != I40E_PF_ATQLEN_ATQENABLE_MASK) 1055#error I40E_VF_ATQLEN_ATQENABLE_MASK != I40E_PF_ATQLEN_ATQENABLE_MASK 1056#endif 1057 i40e_config_asq_regs(hw); 1058 1059 hw->aq.arq.next_to_use = 0; 1060 hw->aq.arq.next_to_clean = 0; 1061 1062 i40e_config_arq_regs(hw); 1063} 1064