ispvar.h revision 317360
1/* $FreeBSD: stable/11/sys/dev/isp/ispvar.h 317360 2017-04-24 10:21:13Z mav $ */ 2/*- 3 * Copyright (c) 1997-2009 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 */ 29/* 30 * Soft Definitions for for Qlogic ISP SCSI adapters. 31 */ 32 33#ifndef _ISPVAR_H 34#define _ISPVAR_H 35 36#if defined(__NetBSD__) || defined(__OpenBSD__) 37#include <dev/ic/isp_stds.h> 38#include <dev/ic/ispmbox.h> 39#endif 40#ifdef __FreeBSD__ 41#include <dev/isp/isp_stds.h> 42#include <dev/isp/ispmbox.h> 43#endif 44#ifdef __linux__ 45#include "isp_stds.h" 46#include "ispmbox.h" 47#endif 48#ifdef __svr4__ 49#include "isp_stds.h" 50#include "ispmbox.h" 51#endif 52 53#define ISP_CORE_VERSION_MAJOR 7 54#define ISP_CORE_VERSION_MINOR 0 55 56/* 57 * Vector for bus specific code to provide specific services. 58 */ 59typedef struct ispsoftc ispsoftc_t; 60struct ispmdvec { 61 void (*dv_run_isr) (ispsoftc_t *); 62 uint32_t (*dv_rd_reg) (ispsoftc_t *, int); 63 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t); 64 int (*dv_mbxdma) (ispsoftc_t *); 65 int (*dv_dmaset) (ispsoftc_t *, XS_T *, void *); 66 void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint32_t); 67 int (*dv_irqsetup) (ispsoftc_t *); 68 void (*dv_dregs) (ispsoftc_t *, const char *); 69 const void * dv_ispfw; /* ptr to f/w */ 70 uint16_t dv_conf1; 71 uint16_t dv_clock; /* clock frequency */ 72}; 73 74/* 75 * Overall parameters 76 */ 77#define MAX_TARGETS 16 78#ifndef MAX_FC_TARG 79#define MAX_FC_TARG 1024 80#endif 81#define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS) 82#define ISP_MAX_LUNS(isp) (isp)->isp_maxluns 83#define ISP_MAX_IRQS 3 84 85/* 86 * Macros to access ISP registers through bus specific layers- 87 * mostly wrappers to vector through the mdvec structure. 88 */ 89#define ISP_RUN_ISR(isp) \ 90 (*(isp)->isp_mdvec->dv_run_isr)(isp) 91 92#define ISP_READ(isp, reg) \ 93 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 94 95#define ISP_WRITE(isp, reg, val) \ 96 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 97 98#define ISP_MBOXDMASETUP(isp) \ 99 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 100 101#define ISP_DMASETUP(isp, xs, req) \ 102 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req)) 103 104#define ISP_DMAFREE(isp, xs, hndl) \ 105 if ((isp)->isp_mdvec->dv_dmaclr) \ 106 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl)) 107 108#define ISP_IRQSETUP(isp) \ 109 (((isp)->isp_mdvec->dv_irqsetup) ? (*(isp)->isp_mdvec->dv_irqsetup)(isp) : 0) 110#define ISP_DUMPREGS(isp, m) \ 111 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m)) 112 113#define ISP_SETBITS(isp, reg, val) \ 114 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 115 116#define ISP_CLRBITS(isp, reg, val) \ 117 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 118 119/* 120 * The MEMORYBARRIER macro is defined per platform (to provide synchronization 121 * on Request and Response Queues, Scratch DMA areas, and Registers) 122 * 123 * Defined Memory Barrier Synchronization Types 124 */ 125#define SYNC_REQUEST 0 /* request queue synchronization */ 126#define SYNC_RESULT 1 /* result queue synchronization */ 127#define SYNC_SFORDEV 2 /* scratch, sync for ISP */ 128#define SYNC_SFORCPU 3 /* scratch, sync for CPU */ 129#define SYNC_REG 4 /* for registers */ 130#define SYNC_ATIOQ 5 /* atio result queue (24xx) */ 131#define SYNC_IFORDEV 6 /* synchrounous IOCB, sync for ISP */ 132#define SYNC_IFORCPU 7 /* synchrounous IOCB, sync for CPU */ 133 134/* 135 * Request/Response Queue defines and macros. 136 * The maximum is defined per platform (and can be based on board type). 137 */ 138/* This is the size of a queue entry (request and response) */ 139#define QENTRY_LEN 64 140/* Both request and result queue length must be a power of two */ 141#define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x) 142#ifdef ISP_TARGET_MODE 143#define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x) 144#else 145#define RESULT_QUEUE_LEN(x) \ 146 (((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2) 147#endif 148#define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN)) 149#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN) 150#define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 151#define ISP_QFREE(in, out, qlen) \ 152 ((in == out)? (qlen - 1) : ((in > out)? \ 153 ((qlen - 1) - (in - out)) : (out - in - 1))) 154#define ISP_QAVAIL(isp) \ 155 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp)) 156 157#define ISP_ADD_REQUEST(isp, nxti) \ 158 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 159 ISP_WRITE(isp, isp->isp_rqstinrp, nxti); \ 160 isp->isp_reqidx = nxti 161 162#define ISP_SYNC_REQUEST(isp) \ 163 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 164 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \ 165 ISP_WRITE(isp, isp->isp_rqstinrp, isp->isp_reqidx) 166 167/* 168 * SCSI Specific Host Adapter Parameters- per bus, per target 169 */ 170typedef struct { 171 uint32_t : 8, 172 update : 1, 173 sendmarker : 1, 174 isp_req_ack_active_neg : 1, 175 isp_data_line_active_neg: 1, 176 isp_cmd_dma_burst_enable: 1, 177 isp_data_dma_burst_enabl: 1, 178 isp_fifo_threshold : 3, 179 isp_ptisp : 1, 180 isp_ultramode : 1, 181 isp_diffmode : 1, 182 isp_lvdmode : 1, 183 isp_fast_mttr : 1, /* fast sram */ 184 isp_initiator_id : 4, 185 isp_async_data_setup : 4; 186 uint16_t isp_selection_timeout; 187 uint16_t isp_max_queue_depth; 188 uint8_t isp_tag_aging; 189 uint8_t isp_bus_reset_delay; 190 uint8_t isp_retry_count; 191 uint8_t isp_retry_delay; 192 struct { 193 uint32_t 194 exc_throttle : 8, 195 : 1, 196 dev_enable : 1, /* ignored */ 197 dev_update : 1, 198 dev_refresh : 1, 199 actv_offset : 4, 200 goal_offset : 4, 201 nvrm_offset : 4; 202 uint8_t actv_period; /* current sync period */ 203 uint8_t goal_period; /* goal sync period */ 204 uint8_t nvrm_period; /* nvram sync period */ 205 uint16_t actv_flags; /* current device flags */ 206 uint16_t goal_flags; /* goal device flags */ 207 uint16_t nvrm_flags; /* nvram device flags */ 208 } isp_devparam[MAX_TARGETS]; 209} sdparam; 210 211/* 212 * Device Flags 213 */ 214#define DPARM_DISC 0x8000 215#define DPARM_PARITY 0x4000 216#define DPARM_WIDE 0x2000 217#define DPARM_SYNC 0x1000 218#define DPARM_TQING 0x0800 219#define DPARM_ARQ 0x0400 220#define DPARM_QFRZ 0x0200 221#define DPARM_RENEG 0x0100 222#define DPARM_NARROW 0x0080 223#define DPARM_ASYNC 0x0040 224#define DPARM_PPR 0x0020 225#define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ) 226#define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING)) 227 228/* technically, not really correct, as they need to be rated based upon clock */ 229#define ISP_80M_SYNCPARMS 0x0c09 230#define ISP_40M_SYNCPARMS 0x0c0a 231#define ISP_20M_SYNCPARMS 0x0c0c 232#define ISP_20M_SYNCPARMS_1040 0x080c 233#define ISP_10M_SYNCPARMS 0x0c19 234#define ISP_08M_SYNCPARMS 0x0c25 235#define ISP_05M_SYNCPARMS 0x0c32 236#define ISP_04M_SYNCPARMS 0x0c41 237 238/* 239 * Fibre Channel Specifics 240 */ 241/* These are for non-2K Login Firmware cards */ 242#define FL_ID 0x7e /* FL_Port Special ID */ 243#define SNS_ID 0x80 /* SNS Server Special ID */ 244#define NPH_MAX 0xfe 245 246/* These are for 2K Login Firmware cards */ 247#define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */ 248#define NPH_MGT_ID 0x7FA /* Management Server Special ID */ 249#define NPH_SNS_ID 0x7FC /* SNS Server Special ID */ 250#define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */ 251#define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */ 252#define NPH_IP_BCST 0x7FF /* IP Broadcast Special ID (0xFFFFFF) */ 253#define NPH_MAX_2K 0x800 254 255/* 256 * "Unassigned" handle to be used internally 257 */ 258#define NIL_HANDLE 0xffff 259 260/* 261 * Limit for devices on an arbitrated loop. 262 */ 263#define LOCAL_LOOP_LIM 126 264 265/* 266 * Limit for (2K login) N-port handle amounts 267 */ 268#define MAX_NPORT_HANDLE 2048 269 270/* 271 * Special Constants 272 */ 273#define INI_NONE ((uint64_t) 0) 274#define ISP_NOCHAN 0xff 275 276/* 277 * Special Port IDs 278 */ 279#define MANAGEMENT_PORT_ID 0xFFFFFA 280#define SNS_PORT_ID 0xFFFFFC 281#define FABRIC_PORT_ID 0xFFFFFE 282#define PORT_ANY 0xFFFFFF 283#define PORT_NONE 0 284#define VALID_PORT(port) (port != PORT_NONE && port != PORT_ANY) 285#define DOMAIN_CONTROLLER_BASE 0xFFFC00 286#define DOMAIN_CONTROLLER_END 0xFFFCFF 287 288/* 289 * Command Handles 290 * 291 * Most QLogic initiator or target have 32 bit handles associated with them. 292 * We want to have a quick way to index back and forth between a local SCSI 293 * command context and what the firmware is passing back to us. We also 294 * want to avoid working on stale information. This structure handles both 295 * at the expense of some local memory. 296 * 297 * The handle is architected thusly: 298 * 299 * 0 means "free handle" 300 * bits 0..12 index commands 301 * bits 13..15 bits index usage 302 * bits 16..31 contain a rolling sequence 303 * 304 * 305 */ 306typedef struct { 307 void * cmd; /* associated command context */ 308 uint32_t handle; /* handle associated with this command */ 309} isp_hdl_t; 310#define ISP_HANDLE_FREE 0x00000000 311#define ISP_HANDLE_CMD_MASK 0x00001fff 312#define ISP_HANDLE_USAGE_MASK 0x0000e000 313#define ISP_HANDLE_USAGE_SHIFT 13 314#define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT) 315# define ISP_HANDLE_NONE 0 316# define ISP_HANDLE_INITIATOR 1 317# define ISP_HANDLE_TARGET 2 318# define ISP_HANDLE_CTRL 3 319#define ISP_HANDLE_SEQ_MASK 0xffff0000 320#define ISP_HANDLE_SEQ_SHIFT 16 321#define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT) 322#define ISP_VALID_HANDLE(c, hdl) \ 323 ((ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR || \ 324 ISP_H2HT(hdl) == ISP_HANDLE_TARGET || \ 325 ISP_H2HT(hdl) == ISP_HANDLE_CTRL) && \ 326 ((hdl) & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \ 327 (hdl) == ((c)->isp_xflist[(hdl) & ISP_HANDLE_CMD_MASK].handle)) 328#define ISP_BAD_HANDLE_INDEX 0xffffffff 329 330 331/* 332 * FC Port Database entry. 333 * 334 * It has a handle that the f/w uses to address commands to a device. 335 * This handle's value may be assigned by the firmware (e.g., for local loop 336 * devices) or by the driver (e.g., for fabric devices). 337 * 338 * It has a state. If the state if VALID, that means that we've logged into 339 * the device. 340 * 341 * Local loop devices the firmware automatically performs PLOGI on for us 342 * (which is why that handle is imposed upon us). Fabric devices we assign 343 * a handle to and perform the PLOGI on. 344 * 345 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID 346 * entries as PROBATIONAL. This allows us, if policy says to, just keep track 347 * of devices whose handles change but are otherwise the same device (and 348 * thus keep 'target' constant). 349 * 350 * In any case, we search all possible local loop handles. For each one that 351 * has a port database entity returned, we search for any PROBATIONAL entry 352 * that matches it and update as appropriate. Otherwise, as a new entry, we 353 * find room for it in the Port Database. We *try* and use the handle as the 354 * index to put it into the Database, but that's just an optimization. We mark 355 * the entry VALID and make sure that the target index is updated and correct. 356 * 357 * When we get done searching the local loop, we then search similarly for 358 * a list of devices we've gotten from the fabric name controller (if we're 359 * on a fabric). VALID marking is also done similarly. 360 * 361 * When all of this is done, we can march through the database and clean up 362 * any entry that is still PROBATIONAL (these represent devices which have 363 * departed). Then we're done and can resume normal operations. 364 * 365 * Negative invariants that we try and test for are: 366 * 367 * + There can never be two non-NIL entries with the same { Port, Node } WWN 368 * duples. 369 * 370 * + There can never be two non-NIL entries with the same handle. 371 */ 372typedef struct { 373 /* 374 * This is the handle that the firmware needs in order for us to 375 * send commands to the device. For pre-24XX cards, this would be 376 * the 'loopid'. 377 */ 378 uint16_t handle; 379 380 /* 381 * PRLI word 3 parameters contains role as well as other things. 382 * 383 * The state is the current state of this entry. 384 * 385 * The is_target is the current state of target on this port. 386 * 387 * The is_initiator is the current state of initiator on this port. 388 * 389 * Portid is obvious, as are node && port WWNs. The new_role and 390 * new_portid is for when we are pending a change. 391 */ 392 uint16_t prli_word3; /* PRLI parameters */ 393 uint16_t new_prli_word3; /* Incoming new PRLI parameters */ 394 uint16_t : 12, 395 probational : 1, 396 state : 3; 397 uint32_t : 6, 398 is_target : 1, 399 is_initiator : 1, 400 portid : 24; 401 uint32_t 402 : 8, 403 new_portid : 24; 404 uint64_t node_wwn; 405 uint64_t port_wwn; 406 uint32_t gone_timer; 407} fcportdb_t; 408 409#define FC_PORTDB_STATE_NIL 0 /* Empty DB slot */ 410#define FC_PORTDB_STATE_DEAD 1 /* Was valid, but no more. */ 411#define FC_PORTDB_STATE_CHANGED 2 /* Was valid, but changed. */ 412#define FC_PORTDB_STATE_NEW 3 /* Logged in, not announced. */ 413#define FC_PORTDB_STATE_ZOMBIE 4 /* Invalid, but announced. */ 414#define FC_PORTDB_STATE_VALID 5 /* Valid */ 415 416#define FC_PORTDB_TGT(isp, bus, pdb) (int)(lp - FCPARAM(isp, bus)->portdb) 417 418/* 419 * FC card specific information 420 * 421 * This structure is replicated across multiple channels for multi-id 422 * capapble chipsets, with some entities different on a per-channel basis. 423 */ 424 425typedef struct { 426 int isp_gbspeed; /* Connection speed */ 427 int isp_linkstate; /* Link state */ 428 int isp_fwstate; /* ISP F/W state */ 429 int isp_loopstate; /* Loop State */ 430 int isp_topo; /* Connection Type */ 431 432 uint32_t : 4, 433 fctape_enabled : 1, 434 sendmarker : 1, 435 role : 2, 436 isp_portid : 24; /* S_ID */ 437 438 uint16_t isp_fwoptions; 439 uint16_t isp_xfwoptions; 440 uint16_t isp_zfwoptions; 441 uint16_t isp_loopid; /* hard loop id */ 442 uint16_t isp_sns_hdl; /* N-port handle for SNS */ 443 uint16_t isp_lasthdl; /* only valid for channel 0 */ 444 uint16_t isp_maxalloc; 445 uint16_t isp_fabric_params; 446 uint16_t isp_login_hdl; /* Logging in handle */ 447 uint8_t isp_retry_delay; 448 uint8_t isp_retry_count; 449 450 /* 451 * Current active WWNN/WWPN 452 */ 453 uint64_t isp_wwnn; 454 uint64_t isp_wwpn; 455 456 /* 457 * NVRAM WWNN/WWPN 458 */ 459 uint64_t isp_wwnn_nvram; 460 uint64_t isp_wwpn_nvram; 461 462 /* 463 * Our Port Data Base 464 */ 465 fcportdb_t portdb[MAX_FC_TARG]; 466 467 /* 468 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 469 */ 470 void * isp_scratch; 471 XS_DMA_ADDR_T isp_scdma; 472 473 uint8_t isp_scanscratch[ISP_FC_SCRLEN]; 474} fcparam; 475 476#define FW_CONFIG_WAIT 0 477#define FW_WAIT_LINK 1 478#define FW_WAIT_LOGIN 2 479#define FW_READY 3 480#define FW_LOSS_OF_SYNC 4 481#define FW_ERROR 5 482#define FW_REINIT 6 483#define FW_NON_PART 7 484 485#define LOOP_NIL 0 486#define LOOP_HAVE_LINK 1 487#define LOOP_HAVE_ADDR 2 488#define LOOP_TESTING_LINK 3 489#define LOOP_LTEST_DONE 4 490#define LOOP_SCANNING_LOOP 5 491#define LOOP_LSCAN_DONE 6 492#define LOOP_SCANNING_FABRIC 7 493#define LOOP_FSCAN_DONE 8 494#define LOOP_SYNCING_PDB 9 495#define LOOP_READY 10 496 497#define TOPO_NL_PORT 0 498#define TOPO_FL_PORT 1 499#define TOPO_N_PORT 2 500#define TOPO_F_PORT 3 501#define TOPO_PTP_STUB 4 502 503#define TOPO_IS_FABRIC(x) ((x) == TOPO_FL_PORT || (x) == TOPO_F_PORT) 504 505/* 506 * Soft Structure per host adapter 507 */ 508struct ispsoftc { 509 /* 510 * Platform (OS) specific data 511 */ 512 struct isposinfo isp_osinfo; 513 514 /* 515 * Pointer to bus specific functions and data 516 */ 517 struct ispmdvec * isp_mdvec; 518 519 /* 520 * (Mostly) nonvolatile state. Board specific parameters 521 * may contain some volatile state (e.g., current loop state). 522 */ 523 524 void * isp_param; /* type specific */ 525 uint64_t isp_fwattr; /* firmware attributes */ 526 uint16_t isp_fwrev[3]; /* Loaded F/W revision */ 527 uint16_t isp_maxcmds; /* max possible I/O cmds */ 528 uint8_t isp_type; /* HBA Chip Type */ 529 uint8_t isp_revision; /* HBA Chip H/W Revision */ 530 uint8_t isp_nirq; /* number of IRQs */ 531 uint16_t isp_nchan; /* number of channels */ 532 uint32_t isp_maxluns; /* maximum luns supported */ 533 534 uint32_t isp_clock : 8, /* input clock */ 535 : 5, 536 isp_port : 1, /* 23XX/24XX only */ 537 isp_bustype : 1, /* SBus or PCI */ 538 isp_loaded_fw : 1, /* loaded firmware */ 539 isp_dblev : 16; /* debug log mask */ 540 541 542 uint32_t isp_confopts; /* config options */ 543 544 uint32_t isp_rqstinrp; /* register for REQINP */ 545 uint32_t isp_rqstoutrp; /* register for REQOUTP */ 546 uint32_t isp_respinrp; /* register for RESINP */ 547 uint32_t isp_respoutrp; /* register for RESOUTP */ 548 549 /* 550 * Volatile state 551 */ 552 553 volatile u_int isp_mboxbsy; /* mailbox command active */ 554 volatile u_int isp_state; 555 volatile mbreg_t isp_curmbx; /* currently active mailbox command */ 556 volatile uint32_t isp_reqodx; /* index of last ISP pickup */ 557 volatile uint32_t isp_reqidx; /* index of next request */ 558 volatile uint32_t isp_residx; /* index of last ISP write */ 559 volatile uint32_t isp_resodx; /* index of next result */ 560 volatile uint32_t isp_atioodx; /* index of next ATIO */ 561 volatile uint32_t isp_obits; /* mailbox command output */ 562 volatile uint32_t isp_serno; /* rolling serial number */ 563 volatile uint16_t isp_mboxtmp[MAX_MAILBOX]; 564 volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */ 565 volatile uint16_t isp_seqno; /* running sequence number */ 566 567 /* 568 * Active commands are stored here, indexed by handle functions. 569 */ 570 isp_hdl_t *isp_xflist; 571 isp_hdl_t *isp_xffree; 572 573 /* 574 * DMA mapped in area for synchronous IOCB requests. 575 */ 576 void * isp_iocb; 577 XS_DMA_ADDR_T isp_iocb_dma; 578 579 /* 580 * request/result queue pointers and DMA handles for them. 581 */ 582 void * isp_rquest; 583 void * isp_result; 584 XS_DMA_ADDR_T isp_rquest_dma; 585 XS_DMA_ADDR_T isp_result_dma; 586#ifdef ISP_TARGET_MODE 587 /* for 24XX only */ 588 void * isp_atioq; 589 XS_DMA_ADDR_T isp_atioq_dma; 590#endif 591}; 592 593#define SDPARAM(isp, chan) (&((sdparam *)(isp)->isp_param)[(chan)]) 594#define FCPARAM(isp, chan) (&((fcparam *)(isp)->isp_param)[(chan)]) 595 596#define ISP_SET_SENDMARKER(isp, chan, val) \ 597 if (IS_FC(isp)) { \ 598 FCPARAM(isp, chan)->sendmarker = val; \ 599 } else { \ 600 SDPARAM(isp, chan)->sendmarker = val; \ 601 } 602 603#define ISP_TST_SENDMARKER(isp, chan) \ 604 (IS_FC(isp)? \ 605 FCPARAM(isp, chan)->sendmarker != 0 : \ 606 SDPARAM(isp, chan)->sendmarker != 0) 607 608/* 609 * ISP Driver Run States 610 */ 611#define ISP_NILSTATE 0 612#define ISP_CRASHED 1 613#define ISP_RESETSTATE 2 614#define ISP_INITSTATE 3 615#define ISP_RUNSTATE 4 616 617/* 618 * ISP Runtime Configuration Options 619 */ 620#define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 621#define ISP_CFG_PORT_PREF 0x0e /* Mask for Port Prefs (all FC except 2100) */ 622#define ISP_CFG_PORT_DEF 0x00 /* prefer connection type from NVRAM */ 623#define ISP_CFG_LPORT_ONLY 0x02 /* insist on {N/F}L-Port connection */ 624#define ISP_CFG_NPORT_ONLY 0x04 /* insist on {N/F}-Port connection */ 625#define ISP_CFG_LPORT 0x06 /* prefer {N/F}L-Port connection */ 626#define ISP_CFG_NPORT 0x08 /* prefer {N/F}-Port connection */ 627#define ISP_CFG_1GB 0x10 /* force 1GB connection (23XX only) */ 628#define ISP_CFG_2GB 0x20 /* force 2GB connection (23XX only) */ 629#define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 630#define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 631#define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */ 632#define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */ 633#define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */ 634#define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */ 635#define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */ 636#define ISP_CFG_4GB 0x2000 /* force 4GB connection (24XX only) */ 637#define ISP_CFG_8GB 0x4000 /* force 8GB connection (25XX only) */ 638#define ISP_CFG_16GB 0x8000 /* force 16GB connection (82XX only) */ 639 640/* 641 * For each channel, the outer layers should know what role that channel 642 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET, 643 * ISP_ROLE_BOTH. 644 * 645 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded, 646 * NVRAM read, and defaults set, but any further initialization (e.g. 647 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done. 648 * 649 * If INITIATOR MODE isn't set, attempts to run commands will be stopped 650 * at isp_start and completed with the equivalent of SELECTION TIMEOUT. 651 * 652 * If TARGET MODE is set, it doesn't mean that the rest of target mode support 653 * needs to be enabled, or will even work. What happens with the 2X00 cards 654 * here is that if you have enabled it with TARGET MODE as part of the ICB 655 * options, but you haven't given the f/w any ram resources for ATIOs or 656 * Immediate Notifies, the f/w just handles what it can and you never see 657 * anything. Basically, it sends a single byte of data (the first byte, 658 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for 659 * INQUIRY, and sends back QUEUE FULL status for any other command. 660 * 661 */ 662#define ISP_ROLE_NONE 0x0 663#define ISP_ROLE_TARGET 0x1 664#define ISP_ROLE_INITIATOR 0x2 665#define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR) 666#define ISP_ROLE_EITHER ISP_ROLE_BOTH 667#ifndef ISP_DEFAULT_ROLES 668/* 669 * Counterintuitively, we prefer to default to role 'none' 670 * if we are enable target mode support. This gives us the 671 * maximum flexibility as to which port will do what. 672 */ 673#ifdef ISP_TARGET_MODE 674#define ISP_DEFAULT_ROLES ISP_ROLE_NONE 675#else 676#define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR 677#endif 678#endif 679 680 681/* 682 * Firmware related defines 683 */ 684#define ISP_CODE_ORG 0x1000 /* default f/w code start */ 685#define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */ 686#define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */ 687#define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 688#define ISP_FW_MAJOR(code) ((code >> 24) & 0xff) 689#define ISP_FW_MINOR(code) ((code >> 16) & 0xff) 690#define ISP_FW_MICRO(code) ((code >> 8) & 0xff) 691#define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 692#define ISP_FW_MAJORX(xp) (xp[0]) 693#define ISP_FW_MINORX(xp) (xp[1]) 694#define ISP_FW_MICROX(xp) (xp[2]) 695#define ISP_FW_NEWER_THAN(i, major, minor, micro) \ 696 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro)) 697#define ISP_FW_OLDER_THAN(i, major, minor, micro) \ 698 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro)) 699 700/* 701 * Bus (implementation) types 702 */ 703#define ISP_BT_PCI 0 /* PCI Implementations */ 704#define ISP_BT_SBUS 1 /* SBus Implementations */ 705 706/* 707 * If we have not otherwise defined SBus support away make sure 708 * it is defined here such that the code is included as default 709 */ 710#ifndef ISP_SBUS_SUPPORTED 711#define ISP_SBUS_SUPPORTED 1 712#endif 713 714/* 715 * Chip Types 716 */ 717#define ISP_HA_SCSI 0xf 718#define ISP_HA_SCSI_UNKNOWN 0x1 719#define ISP_HA_SCSI_1020 0x2 720#define ISP_HA_SCSI_1020A 0x3 721#define ISP_HA_SCSI_1040 0x4 722#define ISP_HA_SCSI_1040A 0x5 723#define ISP_HA_SCSI_1040B 0x6 724#define ISP_HA_SCSI_1040C 0x7 725#define ISP_HA_SCSI_1240 0x8 726#define ISP_HA_SCSI_1080 0x9 727#define ISP_HA_SCSI_1280 0xa 728#define ISP_HA_SCSI_10160 0xb 729#define ISP_HA_SCSI_12160 0xc 730#define ISP_HA_FC 0xf0 731#define ISP_HA_FC_2100 0x10 732#define ISP_HA_FC_2200 0x20 733#define ISP_HA_FC_2300 0x30 734#define ISP_HA_FC_2312 0x40 735#define ISP_HA_FC_2322 0x50 736#define ISP_HA_FC_2400 0x60 737#define ISP_HA_FC_2500 0x70 738#define ISP_HA_FC_2600 0x80 739 740#define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI) 741#define IS_1020(isp) (isp->isp_type < ISP_HA_SCSI_1240) 742#define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240) 743#define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080) 744#define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280) 745#define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160) 746#define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160) 747 748#define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp)) 749#define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp)) 750#define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp)) 751#define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp)) 752#define IS_ULTRA3(isp) (IS_1X160(isp)) 753 754#define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC) 755#define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100) 756#define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200) 757#define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300 && \ 758 (isp)->isp_type < ISP_HA_FC_2400) 759#define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300) 760#define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312) 761#define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322) 762#define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400) 763#define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500) 764#define IS_26XX(isp) ((isp)->isp_type >= ISP_HA_FC_2600) 765 766/* 767 * DMA related macros 768 */ 769#define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff) 770#define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff) 771#define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff) 772#define DMA_WD0(x) ((uint16_t)((x) & 0xffff)) 773 774#define DMA_LO32(x) ((uint32_t) (x)) 775#define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32)) 776 777/* 778 * Core System Function Prototypes 779 */ 780 781/* 782 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init. 783 */ 784void isp_reset(ispsoftc_t *, int); 785 786/* 787 * Initialize Hardware to known state 788 */ 789void isp_init(ispsoftc_t *); 790 791/* 792 * Reset the ISP and call completion for any orphaned commands. 793 */ 794int isp_reinit(ispsoftc_t *, int); 795 796/* 797 * Shutdown hardware after use. 798 */ 799void isp_shutdown(ispsoftc_t *); 800 801/* 802 * Internal Interrupt Service Routine 803 */ 804#ifdef ISP_TARGET_MODE 805void isp_intr_atioq(ispsoftc_t *); 806#endif 807void isp_intr_async(ispsoftc_t *, uint16_t event); 808void isp_intr_mbox(ispsoftc_t *, uint16_t mbox0); 809void isp_intr_respq(ispsoftc_t *); 810 811 812/* 813 * Command Entry Point- Platform Dependent layers call into this 814 */ 815int isp_start(XS_T *); 816 817/* these values are what isp_start returns */ 818#define CMD_COMPLETE 101 /* command completed */ 819#define CMD_EAGAIN 102 /* busy- maybe retry later */ 820#define CMD_QUEUED 103 /* command has been queued for execution */ 821#define CMD_RQLATER 104 /* requeue this command later */ 822 823/* 824 * Command Completion Point- Core layers call out from this with completed cmds 825 */ 826void isp_done(XS_T *); 827 828/* 829 * Platform Dependent to External to Internal Control Function 830 * 831 * Assumes locks are held on entry. You should note that with many of 832 * these commands locks may be released while this function is called. 833 * 834 * ... ISPCTL_RESET_BUS, int channel); 835 * Reset BUS on this channel 836 * ... ISPCTL_RESET_DEV, int channel, int target); 837 * Reset Device on this channel at this target. 838 * ... ISPCTL_ABORT_CMD, XS_T *xs); 839 * Abort active transaction described by xs. 840 * ... IPCTL_UPDATE_PARAMS); 841 * Update any operating parameters (speed, etc.) 842 * ... ISPCTL_FCLINK_TEST, int channel); 843 * Test FC link status on this channel 844 * ... ISPCTL_SCAN_LOOP, int channel); 845 * Scan local loop on this channel 846 * ... ISPCTL_SCAN_FABRIC, int channel); 847 * Scan fabric on this channel 848 * ... ISPCTL_PDB_SYNC, int channel); 849 * Synchronize port database on this channel 850 * ... ISPCTL_SEND_LIP, int channel); 851 * Send a LIP on this channel 852 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn) 853 * Get a WWNN/WWPN for this N-port handle on this channel 854 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp) 855 * Run this mailbox command 856 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb) 857 * Get PDB on this channel for this N-port handle 858 * ... ISPCTL_PLOGX, isp_plcmd_t *) 859 * Performa a port login/logout 860 * ... ISPCTL_CHANGE_ROLE, int channel, int role); 861 * Change role of specified channel 862 * 863 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in 864 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_LOOP, and ISPCTL_SCAN_FABRIC. 865 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging 866 * and logging out of fabric devices (if one is on a fabric) and then marking 867 * the 'loop state' as being ready to now be used for sending commands to 868 * devices. 869 */ 870typedef enum { 871 ISPCTL_RESET_BUS, 872 ISPCTL_RESET_DEV, 873 ISPCTL_ABORT_CMD, 874 ISPCTL_UPDATE_PARAMS, 875 ISPCTL_FCLINK_TEST, 876 ISPCTL_SCAN_FABRIC, 877 ISPCTL_SCAN_LOOP, 878 ISPCTL_PDB_SYNC, 879 ISPCTL_SEND_LIP, 880 ISPCTL_GET_NAMES, 881 ISPCTL_RUN_MBOXCMD, 882 ISPCTL_GET_PDB, 883 ISPCTL_PLOGX, 884 ISPCTL_CHANGE_ROLE 885} ispctl_t; 886int isp_control(ispsoftc_t *, ispctl_t, ...); 887 888/* 889 * Platform Dependent to Internal to External Control Function 890 */ 891 892typedef enum { 893 ISPASYNC_NEW_TGT_PARAMS, /* SPI New Target Parameters */ 894 ISPASYNC_BUS_RESET, /* All Bus Was Reset */ 895 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 896 ISPASYNC_LOOP_UP, /* FC Loop Up */ 897 ISPASYNC_LIP, /* FC LIP Received */ 898 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */ 899 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */ 900 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */ 901 ISPASYNC_DEV_CHANGED, /* FC Device Changed */ 902 ISPASYNC_DEV_STAYED, /* FC Device Stayed */ 903 ISPASYNC_DEV_GONE, /* FC Device Departure */ 904 ISPASYNC_TARGET_NOTIFY, /* All target async notification */ 905 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */ 906 ISPASYNC_TARGET_ACTION, /* All target action requested */ 907 ISPASYNC_FW_CRASH, /* All Firmware has crashed */ 908 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */ 909} ispasync_t; 910void isp_async(ispsoftc_t *, ispasync_t, ...); 911 912#define ISPASYNC_CHANGE_PDB 0 913#define ISPASYNC_CHANGE_SNS 1 914#define ISPASYNC_CHANGE_OTHER 2 915 916/* 917 * Platform Dependent Error and Debug Printout 918 * 919 * Two required functions for each platform must be provided: 920 * 921 * void isp_prt(ispsoftc_t *, int level, const char *, ...) 922 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...) 923 * 924 * but due to compiler differences on different platforms this won't be 925 * formally defined here. Instead, they go in each platform definition file. 926 */ 927 928#define ISP_LOGALL 0x0 /* log always */ 929#define ISP_LOGCONFIG 0x1 /* log configuration messages */ 930#define ISP_LOGINFO 0x2 /* log informational messages */ 931#define ISP_LOGWARN 0x4 /* log warning messages */ 932#define ISP_LOGERR 0x8 /* log error messages */ 933#define ISP_LOGDEBUG0 0x10 /* log simple debug messages */ 934#define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */ 935#define ISP_LOGDEBUG2 0x40 /* log most debug messages */ 936#define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */ 937#define ISP_LOG_SANCFG 0x100 /* log SAN configuration */ 938#define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */ 939#define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */ 940#define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */ 941#define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */ 942#define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */ 943#define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */ 944 945/* 946 * Each Platform provides it's own isposinfo substructure of the ispsoftc 947 * defined above. 948 * 949 * Each platform must also provide the following macros/defines: 950 * 951 * 952 * ISP_FC_SCRLEN FC scratch area DMA length 953 * 954 * ISP_MEMZERO(dst, src) platform zeroing function 955 * ISP_MEMCPY(dst, src, count) platform copying function 956 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf 957 * ISP_DELAY(usecs) microsecond spindelay function 958 * ISP_SLEEP(isp, usecs) microsecond sleep function 959 * 960 * ISP_INLINE ___inline or not- depending on how 961 * good your debugger is 962 * ISP_MIN shorthand for ((a) < (b))? (a) : (b) 963 * 964 * NANOTIME_T nanosecond time type 965 * 966 * GET_NANOTIME(NANOTIME_T *) get current nanotime. 967 * 968 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T 969 * 970 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *) 971 * subtract two NANOTIME_T values 972 * 973 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size 974 * for this particular board type 975 * 976 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan) 977 * 978 * Function/Macro the provides memory synchronization on 979 * various objects so that the ISP's and the system's view 980 * of the same object is consistent. 981 * 982 * MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs 983 * MBOX_WAIT_COMPLETE(ispsoftc_t *, mbreg_t *) wait for cmd to be done 984 * MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee 985 * MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs 986 * 987 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area 988 * return -1 if you cannot 989 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area 990 * 991 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null. 992 * 993 * SCSI_GOOD SCSI 'Good' Status 994 * SCSI_CHECK SCSI 'Check Condition' Status 995 * SCSI_BUSY SCSI 'Busy' Status 996 * SCSI_QFULL SCSI 'Queue Full' Status 997 * 998 * XS_T Platform SCSI transaction type (i.e., command for HBA) 999 * XS_DMA_ADDR_T Platform PCI DMA Address Type 1000 * XS_GET_DMA_SEG(..) Get 32 bit dma segment list value 1001 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value 1002 * XS_NEED_DMA64_SEG(..) dma segment needs 64 bit storage 1003 * XS_ISP(xs) gets an instance out of an XS_T 1004 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) "" 1005 * XS_TGT(xs) gets the target "" 1006 * XS_LUN(xs) gets the lun "" 1007 * XS_CDBP(xs) gets a pointer to the scsi CDB "" 1008 * XS_CDBLEN(xs) gets the CDB's length "" 1009 * XS_XFRLEN(xs) gets the associated data transfer length "" 1010 * XS_TIME(xs) gets the time (in seconds) for this command 1011 * XS_GET_RESID(xs) gets the current residual count 1012 * XS_GET_RESID(xs, resid) sets the current residual count 1013 * XS_STSP(xs) gets a pointer to the SCSI status byte "" 1014 * XS_SNSP(xs) gets a pointer to the associate sense data 1015 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage 1016 * XS_CUR_SNSLEN(xs) gets the currently used length of sense data storage 1017 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key 1018 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code 1019 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier 1020 * XS_TAG_P(xs) predicate of whether this command should be tagged 1021 * XS_TAG_TYPE(xs) which type of tag to use 1022 * XS_SETERR(xs) set error state 1023 * 1024 * HBA_NOERROR command has no erros 1025 * HBA_BOTCH hba botched something 1026 * HBA_CMDTIMEOUT command timed out 1027 * HBA_SELTIMEOUT selection timed out (also port logouts for FC) 1028 * HBA_TGTBSY target returned a BUSY status 1029 * HBA_BUSRESET bus reset destroyed command 1030 * HBA_ABORTED command was aborted (by request) 1031 * HBA_DATAOVR a data overrun was detected 1032 * HBA_ARQFAIL Automatic Request Sense failed 1033 * 1034 * XS_ERR(xs) return current error state 1035 * XS_NOERR(xs) there is no error currently set 1036 * XS_INITERR(xs) initialize error state 1037 * 1038 * XS_SAVE_SENSE(xs, sp, len) save sense data 1039 * XS_APPEND_SENSE(xs, sp, len) append more sense data 1040 * 1041 * XS_SENSE_VALID(xs) indicates whether sense is valid 1042 * 1043 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size 1044 * DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle 1045 * 1046 * DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel 1047 * DEFAULT_IID(ispsoftc_t *, int) Default SCSI initiator ID 1048 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID 1049 * 1050 * These establish reasonable defaults for each platform. 1051 * These must be available independent of card NVRAM and are 1052 * to be used should NVRAM not be readable. 1053 * 1054 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use 1055 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use 1056 * 1057 * These defines are hooks to allow the setting of node and 1058 * port WWNs when NVRAM cannot be read or is to be overriden. 1059 * 1060 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use 1061 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use 1062 * 1063 * After NVRAM is read, these will be invoked to get the 1064 * node and port WWNs that will actually be used for this 1065 * channel. 1066 * 1067 * 1068 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr) 1069 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr) 1070 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr) 1071 * 1072 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval) 1073 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval) 1074 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval) 1075 * 1076 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *) 1077 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *) 1078 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval) 1079 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval) 1080 */ 1081 1082#ifdef ISP_TARGET_MODE 1083/* 1084 * The functions below are for the publicly available 1085 * target mode functions that are internal to the Qlogic driver. 1086 */ 1087 1088/* 1089 * This function handles new response queue entry appropriate for target mode. 1090 */ 1091int isp_target_notify(ispsoftc_t *, void *, uint32_t *); 1092 1093/* 1094 * This function externalizes the ability to acknowledge an Immediate Notify request. 1095 */ 1096int isp_notify_ack(ispsoftc_t *, void *); 1097 1098/* 1099 * This function externalized acknowledging (success/fail) an ABTS frame 1100 */ 1101int isp_acknak_abts(ispsoftc_t *, void *, int); 1102 1103/* 1104 * General request queue 'put' routine for target mode entries. 1105 */ 1106int isp_target_put_entry(ispsoftc_t *isp, void *); 1107 1108/* 1109 * General routine to put back an ATIO entry- 1110 * used for replenishing f/w resource counts. 1111 * The argument is a pointer to a source ATIO 1112 * or ATIO2. 1113 */ 1114int isp_target_put_atio(ispsoftc_t *, void *); 1115 1116/* 1117 * General routine to send a final CTIO for a command- used mostly for 1118 * local responses. 1119 */ 1120int isp_endcmd(ispsoftc_t *, ...); 1121#define ECMD_SVALID 0x100 1122#define ECMD_RVALID 0x200 1123#define ECMD_TERMINATE 0x400 1124 1125/* 1126 * Handle an asynchronous event 1127 */ 1128void isp_target_async(ispsoftc_t *, int, int); 1129#endif 1130#endif /* _ISPVAR_H */ 1131