ispvar.h revision 54671
1/* $FreeBSD: head/sys/dev/isp/ispvar.h 54671 1999-12-16 05:42:02Z mjacob $ */ 2/* 3 * Soft Definitions for for Qlogic ISP SCSI adapters. 4 * 5 * Copyright (c) 1997, 1998, 1999 by Matthew Jacob 6 * NASA/Ames Research Center 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice immediately at the beginning of the file, without modification, 14 * this list of conditions, and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 25 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 */ 34 35#ifndef _ISPVAR_H 36#define _ISPVAR_H 37 38#if defined(__NetBSD__) || defined(__OpenBSD__) 39#include <dev/ic/ispmbox.h> 40#ifdef ISP_TARGET_MODE 41#include <dev/ic/isp_target.h> 42#endif 43#endif 44#ifdef __FreeBSD__ 45#include <dev/isp/ispmbox.h> 46#ifdef ISP_TARGET_MODE 47#include <dev/isp/isp_target.h> 48#endif 49#endif 50#ifdef __linux__ 51#include "ispmbox.h" 52#ifdef ISP_TARGET_MODE 53#include "isp_target.h" 54#endif 55#endif 56 57#define ISP_CORE_VERSION_MAJOR 1 58#define ISP_CORE_VERSION_MINOR 11 59 60/* 61 * Vector for bus specific code to provide specific services. 62 */ 63struct ispsoftc; 64struct ispmdvec { 65 u_int16_t (*dv_rd_reg) __P((struct ispsoftc *, int)); 66 void (*dv_wr_reg) __P((struct ispsoftc *, int, u_int16_t)); 67 int (*dv_mbxdma) __P((struct ispsoftc *)); 68 int (*dv_dmaset) __P((struct ispsoftc *, 69 ISP_SCSI_XFER_T *, ispreq_t *, u_int16_t *, u_int16_t)); 70 void (*dv_dmaclr) 71 __P((struct ispsoftc *, ISP_SCSI_XFER_T *, u_int32_t)); 72 void (*dv_reset0) __P((struct ispsoftc *)); 73 void (*dv_reset1) __P((struct ispsoftc *)); 74 void (*dv_dregs) __P((struct ispsoftc *)); 75 const u_int16_t *dv_ispfw; /* ptr to f/w */ 76 u_int16_t dv_fwlen; /* length of f/w */ 77 u_int16_t dv_codeorg; /* code ORG for f/w */ 78 u_int32_t dv_fwrev; /* f/w revision */ 79 /* 80 * Initial values for conf1 register 81 */ 82 u_int16_t dv_conf1; 83 u_int16_t dv_clock; /* clock frequency */ 84}; 85 86#define MAX_TARGETS 16 87#ifdef ISP2100_FABRIC 88#define MAX_FC_TARG 256 89#else 90#define MAX_FC_TARG 126 91#endif 92 93#define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS) 94#ifdef ISP2100_SCCLUN 95#define _ISP_FC_LUN(isp) 65536 96#else 97#define _ISP_FC_LUN(isp) 16 98#endif 99#define _ISP_SCSI_LUN(isp) \ 100 ((ISP_FW_REVX(isp->isp_fwrev) >= ISP_FW_REV(7, 55, 0))? 32 : 8) 101#define ISP_MAX_LUNS(isp) \ 102 (IS_FC(isp)? _ISP_FC_LUN(isp) : _ISP_SCSI_LUN(isp)) 103 104 105/* 106 * Macros to read, write ISP registers through bus specific code. 107 */ 108 109#define ISP_READ(isp, reg) \ 110 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 111 112#define ISP_WRITE(isp, reg, val) \ 113 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 114 115#define ISP_MBOXDMASETUP(isp) \ 116 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 117 118#define ISP_DMASETUP(isp, xs, req, iptrp, optr) \ 119 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req), (iptrp), (optr)) 120 121#define ISP_DMAFREE(isp, xs, hndl) \ 122 if ((isp)->isp_mdvec->dv_dmaclr) \ 123 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl)) 124 125#define ISP_RESET0(isp) \ 126 if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp)) 127#define ISP_RESET1(isp) \ 128 if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp)) 129#define ISP_DUMPREGS(isp) \ 130 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp)) 131 132#define ISP_SETBITS(isp, reg, val) \ 133 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 134 135#define ISP_CLRBITS(isp, reg, val) \ 136 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 137 138/* this is the size of a queue entry (request and response) */ 139#define QENTRY_LEN 64 140/* both request and result queue length must be a power of two */ 141#define RQUEST_QUEUE_LEN MAXISPREQUEST 142/* I've seen wierdnesses with the result queue < 64 */ 143#if MAXISPREQUEST > 64 144#define RESULT_QUEUE_LEN (MAXISPREQUEST/2) 145#else 146#define RESULT_QUEUE_LEN MAXISPREQUEST 147#endif 148#define ISP_QUEUE_ENTRY(q, idx) ((q) + ((idx) * QENTRY_LEN)) 149#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN) 150#define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 151#define ISP_QAVAIL(in, out, qlen) \ 152 ((in == out)? (qlen - 1) : ((in > out)? \ 153 ((qlen - 1) - (in - out)) : (out - in - 1))) 154 155#define ISP_ADD_REQUEST(isp, iptr) \ 156 ISP_WRITE(isp, INMAILBOX4, iptr), isp->isp_reqidx = iptr 157 158/* 159 * SCSI Specific Host Adapter Parameters- per bus, per target 160 */ 161 162typedef struct { 163 u_int isp_gotdparms : 1, 164 isp_req_ack_active_neg : 1, 165 isp_data_line_active_neg: 1, 166 isp_cmd_dma_burst_enable: 1, 167 isp_data_dma_burst_enabl: 1, 168 isp_fifo_threshold : 3, 169 isp_ultramode : 1, 170 isp_diffmode : 1, 171 isp_lvdmode : 1, 172 : 1, 173 isp_initiator_id : 4, 174 isp_async_data_setup : 4; 175 u_int16_t isp_selection_timeout; 176 u_int16_t isp_max_queue_depth; 177 u_int8_t isp_tag_aging; 178 u_int8_t isp_bus_reset_delay; 179 u_int8_t isp_retry_count; 180 u_int8_t isp_retry_delay; 181 struct { 182 u_int dev_enable : 1, /* ignored */ 183 : 1, 184 dev_update : 1, 185 dev_refresh : 1, 186 exc_throttle : 8, 187 cur_offset : 4, 188 sync_offset : 4; 189 u_int8_t cur_period; /* current sync period */ 190 u_int8_t sync_period; /* goal sync period */ 191 u_int16_t dev_flags; /* goal device flags */ 192 u_int16_t cur_dflags; /* current device flags */ 193 } isp_devparam[MAX_TARGETS]; 194} sdparam; 195 196/* 197 * Device Flags 198 */ 199#define DPARM_DISC 0x8000 200#define DPARM_PARITY 0x4000 201#define DPARM_WIDE 0x2000 202#define DPARM_SYNC 0x1000 203#define DPARM_TQING 0x0800 204#define DPARM_ARQ 0x0400 205#define DPARM_QFRZ 0x0200 206#define DPARM_RENEG 0x0100 207#define DPARM_NARROW 0x0080 /* Possibly only available with >= 7.55 fw */ 208#define DPARM_ASYNC 0x0040 /* Possibly only available with >= 7.55 fw */ 209#define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ) 210#define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING)) 211 212 213/* technically, not really correct, as they need to be rated based upon clock */ 214#define ISP_40M_SYNCPARMS 0x080a 215#define ISP_20M_SYNCPARMS 0x080c 216#define ISP_10M_SYNCPARMS 0x0c19 217#define ISP_08M_SYNCPARMS 0x0c25 218#define ISP_05M_SYNCPARMS 0x0c32 219#define ISP_04M_SYNCPARMS 0x0c41 220 221/* 222 * Fibre Channel Specifics 223 */ 224#define FL_PORT_ID 0x7e /* FL_Port Special ID */ 225#define FC_PORT_ID 0x7f /* Fabric Controller Special ID */ 226#define FC_SNS_ID 0x80 /* SNS Server Special ID */ 227 228typedef struct { 229 u_int32_t isp_fwoptions : 16, 230 : 7, 231 loop_seen_once : 1, 232 isp_loopstate : 3, /* Current Loop State */ 233 isp_fwstate : 3, /* ISP F/W state */ 234 isp_gotdparms : 1, 235 isp_onfabric : 1; 236 u_int8_t isp_loopid; /* hard loop id */ 237 u_int8_t isp_alpa; /* ALPA */ 238 volatile u_int16_t isp_lipseq; /* LIP sequence # */ 239 u_int32_t isp_portid; 240 u_int8_t isp_execthrottle; 241 u_int8_t isp_retry_delay; 242 u_int8_t isp_retry_count; 243 u_int8_t isp_reserved; 244 u_int16_t isp_maxalloc; 245 u_int16_t isp_maxfrmlen; 246 u_int64_t isp_nodewwn; 247 u_int64_t isp_portwwn; 248 /* 249 * Port Data Base. This is indexed by 'target', which is invariate. 250 * However, elements within can move around due to loop changes, 251 * so the actual loop ID passed to the F/W is in this structure. 252 * The first time the loop is seen up, loopid will match the index 253 * (except for fabric nodes which are above mapped above FC_SNS_ID 254 * and are completely virtual), but subsequent LIPs can cause things 255 * to move around. 256 */ 257 struct lportdb { 258 u_int 259 loopid : 8, 260 : 4, 261 fabdev : 1, 262 roles : 2, 263 valid : 1; 264 u_int32_t portid; 265 u_int64_t node_wwn; 266 u_int64_t port_wwn; 267 } portdb[MAX_FC_TARG], tport[FL_PORT_ID]; 268 269 /* 270 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 271 */ 272 caddr_t isp_scratch; 273 u_int32_t isp_scdma; 274} fcparam; 275 276#define FW_CONFIG_WAIT 0 277#define FW_WAIT_AL_PA 1 278#define FW_WAIT_LOGIN 2 279#define FW_READY 3 280#define FW_LOSS_OF_SYNC 4 281#define FW_ERROR 5 282#define FW_REINIT 6 283#define FW_NON_PART 7 284 285#define LOOP_NIL 0 286#define LOOP_LIP_RCVD 1 287#define LOOP_PDB_RCVD 2 288#define LOOP_READY 7 289 290/* 291 * Soft Structure per host adapter 292 */ 293struct ispsoftc { 294 /* 295 * Platform (OS) specific data 296 */ 297 struct isposinfo isp_osinfo; 298 299 /* 300 * Pointer to bus specific functions and data 301 */ 302 struct ispmdvec * isp_mdvec; 303 304 /* 305 * (Mostly) nonvolatile state. Board specific parameters 306 * may contain some volatile state (e.g., current loop state). 307 */ 308 309 void * isp_param; /* type specific */ 310 u_int16_t isp_fwrev[3]; /* Loaded F/W revision */ 311 u_int16_t isp_romfw_rev[3]; /* PROM F/W revision */ 312 u_int16_t isp_maxcmds; /* max possible I/O cmds */ 313 u_int8_t isp_type; /* HBA Chip Type */ 314 u_int8_t isp_revision; /* HBA Chip H/W Revision */ 315 316 u_int32_t : 4, 317 isp_touched : 1, /* board ever seen? */ 318 isp_fast_mttr : 1, /* fast sram */ 319 isp_bustype : 1, /* SBus or PCI */ 320 isp_dogactive : 1, /* watchdog running */ 321 isp_dblev : 8, /* debug level */ 322 isp_clock : 8, /* input clock */ 323 isp_confopts : 8; /* config options */ 324 325 /* 326 * Volatile state 327 */ 328 329 volatile u_int32_t : 9, 330 isp_state : 3, 331 isp_sendmarker : 2, /* send a marker entry */ 332 isp_update : 2, /* update parameters */ 333 isp_nactive : 16; /* how many commands active */ 334 335 volatile u_int16_t isp_reqodx; /* index of last ISP pickup */ 336 volatile u_int16_t isp_reqidx; /* index of next request */ 337 volatile u_int16_t isp_residx; /* index of next result */ 338 volatile u_int16_t isp_lasthdls; /* last handle seed */ 339 340 /* 341 * Active commands are stored here, indexed by handle functions. 342 */ 343 ISP_SCSI_XFER_T **isp_xflist; 344 345 /* 346 * request/result queue pointers and dma handles for them. 347 */ 348 caddr_t isp_rquest; 349 caddr_t isp_result; 350 u_int32_t isp_rquest_dma; 351 u_int32_t isp_result_dma; 352}; 353 354#define SDPARAM(isp) ((sdparam *) (isp)->isp_param) 355#define FCPARAM(isp) ((fcparam *) (isp)->isp_param) 356 357/* 358 * ISP States 359 */ 360#define ISP_NILSTATE 0 361#define ISP_RESETSTATE 1 362#define ISP_INITSTATE 2 363#define ISP_RUNSTATE 3 364 365/* 366 * ISP Configuration Options 367 */ 368#define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 369#define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 370#define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 371#define ISP_CFG_OWNWWN 0x02 /* override NVRAM wwn */ 372 373#define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 374#define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 375 376/* 377 * Bus (implementation) types 378 */ 379#define ISP_BT_PCI 0 /* PCI Implementations */ 380#define ISP_BT_SBUS 1 /* SBus Implementations */ 381 382/* 383 * Chip Types 384 */ 385#define ISP_HA_SCSI 0xf 386#define ISP_HA_SCSI_UNKNOWN 0x1 387#define ISP_HA_SCSI_1020 0x2 388#define ISP_HA_SCSI_1020A 0x3 389#define ISP_HA_SCSI_1040 0x4 390#define ISP_HA_SCSI_1040A 0x5 391#define ISP_HA_SCSI_1040B 0x6 392#define ISP_HA_SCSI_1040C 0x7 393#define ISP_HA_SCSI_1240 0x8 394#define ISP_HA_SCSI_1080 0x9 395#define ISP_HA_SCSI_1280 0xa 396#define ISP_HA_FC 0xf0 397#define ISP_HA_FC_2100 0x10 398#define ISP_HA_FC_2200 0x20 399 400#define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI) 401#define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240) 402#define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080) 403#define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280) 404#define IS_12X0(isp) \ 405 (isp->isp_type == ISP_HA_SCSI_1240 || isp->isp_type == ISP_HA_SCSI_1280) 406#define IS_DUALBUS(isp) IS_12X0(isp) 407#define IS_ULTRA2(isp) \ 408 (isp->isp_type == ISP_HA_SCSI_1080 || isp->isp_type == ISP_HA_SCSI_1280) 409#define IS_FC(isp) (isp->isp_type & ISP_HA_FC) 410 411/* 412 * Function Prototypes 413 */ 414 415/* 416 * Reset Hardware. Totally. Assumes that you'll follow this with 417 * a call to isp_init. 418 */ 419void isp_reset __P((struct ispsoftc *)); 420 421/* 422 * Initialize Hardware to known state 423 */ 424void isp_init __P((struct ispsoftc *)); 425 426/* 427 * Reset the ISP and call completion for any orphaned commands. 428 */ 429void isp_restart __P((struct ispsoftc *)); 430 431/* 432 * Interrupt Service Routine 433 */ 434int isp_intr __P((void *)); 435 436/* 437 * Command Entry Point 438 */ 439int32_t ispscsicmd __P((ISP_SCSI_XFER_T *)); 440 441/* 442 * Platform Dependent to External to Internal Control Function 443 * 444 * Assumes all locks are held and that no reentrancy issues need be dealt with. 445 * 446 */ 447typedef enum { 448 ISPCTL_RESET_BUS, /* Reset Bus */ 449 ISPCTL_RESET_DEV, /* Reset Device */ 450 ISPCTL_ABORT_CMD, /* Abort Command */ 451 ISPCTL_UPDATE_PARAMS, /* Update Operating Parameters */ 452#ifdef ISP_TARGET_MODE 453 ISPCTL_ENABLE_LUN, /* enable a LUN */ 454 ISPCTL_MODIFY_LUN, /* enable a LUN */ 455#endif 456 ISPCTL_FCLINK_TEST /* Test FC Link Status */ 457} ispctl_t; 458int isp_control __P((struct ispsoftc *, ispctl_t, void *)); 459 460 461/* 462 * Platform Dependent to Internal to External Control Function 463 * (each platform must provide such a function) 464 * 465 * Assumes all locks are held and that no reentrancy issues need be dealt with. 466 * 467 */ 468 469typedef enum { 470 ISPASYNC_NEW_TGT_PARAMS, 471 ISPASYNC_BUS_RESET, /* Bus Was Reset */ 472 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 473 ISPASYNC_LOOP_UP, /* FC Loop Up */ 474 ISPASYNC_PDB_CHANGED, /* FC Port Data Base Changed */ 475 ISPASYNC_CHANGE_NOTIFY, /* FC SNS Change Notification */ 476 ISPASYNC_FABRIC_DEV, /* FC New Fabric Device */ 477 ISPASYNC_TARGET_CMD, /* New target command */ 478 ISPASYNC_TARGET_EVENT /* New target event */ 479} ispasync_t; 480int isp_async __P((struct ispsoftc *, ispasync_t, void *)); 481 482/* 483 * lost command routine (XXXX IN TRANSITION XXXX) 484 */ 485void isp_lostcmd __P((struct ispsoftc *, ISP_SCSI_XFER_T *)); 486 487#endif /* _ISPVAR_H */ 488