ispvar.h revision 291188
1/* $FreeBSD: head/sys/dev/isp/ispvar.h 291188 2015-11-23 10:06:19Z mav $ */ 2/*- 3 * Copyright (c) 1997-2009 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 */ 29/* 30 * Soft Definitions for for Qlogic ISP SCSI adapters. 31 */ 32 33#ifndef _ISPVAR_H 34#define _ISPVAR_H 35 36#if defined(__NetBSD__) || defined(__OpenBSD__) 37#include <dev/ic/isp_stds.h> 38#include <dev/ic/ispmbox.h> 39#endif 40#ifdef __FreeBSD__ 41#include <dev/isp/isp_stds.h> 42#include <dev/isp/ispmbox.h> 43#endif 44#ifdef __linux__ 45#include "isp_stds.h" 46#include "ispmbox.h" 47#endif 48#ifdef __svr4__ 49#include "isp_stds.h" 50#include "ispmbox.h" 51#endif 52 53#define ISP_CORE_VERSION_MAJOR 7 54#define ISP_CORE_VERSION_MINOR 0 55 56/* 57 * Vector for bus specific code to provide specific services. 58 */ 59typedef struct ispsoftc ispsoftc_t; 60struct ispmdvec { 61 int (*dv_rd_isr) (ispsoftc_t *, uint16_t *, uint16_t *, uint16_t *); 62 uint32_t (*dv_rd_reg) (ispsoftc_t *, int); 63 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t); 64 int (*dv_mbxdma) (ispsoftc_t *); 65 int (*dv_dmaset) (ispsoftc_t *, XS_T *, void *); 66 void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint32_t); 67 void (*dv_reset0) (ispsoftc_t *); 68 void (*dv_reset1) (ispsoftc_t *); 69 void (*dv_dregs) (ispsoftc_t *, const char *); 70 const void * dv_ispfw; /* ptr to f/w */ 71 uint16_t dv_conf1; 72 uint16_t dv_clock; /* clock frequency */ 73}; 74 75/* 76 * Overall parameters 77 */ 78#define MAX_TARGETS 16 79#ifndef MAX_FC_TARG 80#define MAX_FC_TARG 256 81#endif 82#define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS) 83#define ISP_MAX_LUNS(isp) (isp)->isp_maxluns 84 85/* 86 * Macros to access ISP registers through bus specific layers- 87 * mostly wrappers to vector through the mdvec structure. 88 */ 89#define ISP_READ_ISR(isp, isrp, semap, info) \ 90 (*(isp)->isp_mdvec->dv_rd_isr)(isp, isrp, semap, info) 91 92#define ISP_READ(isp, reg) \ 93 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 94 95#define ISP_WRITE(isp, reg, val) \ 96 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 97 98#define ISP_MBOXDMASETUP(isp) \ 99 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 100 101#define ISP_DMASETUP(isp, xs, req) \ 102 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req)) 103 104#define ISP_DMAFREE(isp, xs, hndl) \ 105 if ((isp)->isp_mdvec->dv_dmaclr) \ 106 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl)) 107 108#define ISP_RESET0(isp) \ 109 if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp)) 110#define ISP_RESET1(isp) \ 111 if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp)) 112#define ISP_DUMPREGS(isp, m) \ 113 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m)) 114 115#define ISP_SETBITS(isp, reg, val) \ 116 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 117 118#define ISP_CLRBITS(isp, reg, val) \ 119 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 120 121/* 122 * The MEMORYBARRIER macro is defined per platform (to provide synchronization 123 * on Request and Response Queues, Scratch DMA areas, and Registers) 124 * 125 * Defined Memory Barrier Synchronization Types 126 */ 127#define SYNC_REQUEST 0 /* request queue synchronization */ 128#define SYNC_RESULT 1 /* result queue synchronization */ 129#define SYNC_SFORDEV 2 /* scratch, sync for ISP */ 130#define SYNC_SFORCPU 3 /* scratch, sync for CPU */ 131#define SYNC_REG 4 /* for registers */ 132#define SYNC_ATIOQ 5 /* atio result queue (24xx) */ 133 134/* 135 * Request/Response Queue defines and macros. 136 * The maximum is defined per platform (and can be based on board type). 137 */ 138/* This is the size of a queue entry (request and response) */ 139#define QENTRY_LEN 64 140/* Both request and result queue length must be a power of two */ 141#define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x) 142#ifdef ISP_TARGET_MODE 143#define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x) 144#else 145#define RESULT_QUEUE_LEN(x) \ 146 (((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2) 147#endif 148#define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN)) 149#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN) 150#define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 151#define ISP_QFREE(in, out, qlen) \ 152 ((in == out)? (qlen - 1) : ((in > out)? \ 153 ((qlen - 1) - (in - out)) : (out - in - 1))) 154#define ISP_QAVAIL(isp) \ 155 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp)) 156 157#define ISP_ADD_REQUEST(isp, nxti) \ 158 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 159 ISP_WRITE(isp, isp->isp_rqstinrp, nxti); \ 160 isp->isp_reqidx = nxti 161 162#define ISP_SYNC_REQUEST(isp) \ 163 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 164 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \ 165 ISP_WRITE(isp, isp->isp_rqstinrp, isp->isp_reqidx) 166 167/* 168 * SCSI Specific Host Adapter Parameters- per bus, per target 169 */ 170typedef struct { 171 uint32_t : 8, 172 update : 1, 173 sendmarker : 1, 174 isp_req_ack_active_neg : 1, 175 isp_data_line_active_neg: 1, 176 isp_cmd_dma_burst_enable: 1, 177 isp_data_dma_burst_enabl: 1, 178 isp_fifo_threshold : 3, 179 isp_ptisp : 1, 180 isp_ultramode : 1, 181 isp_diffmode : 1, 182 isp_lvdmode : 1, 183 isp_fast_mttr : 1, /* fast sram */ 184 isp_initiator_id : 4, 185 isp_async_data_setup : 4; 186 uint16_t isp_selection_timeout; 187 uint16_t isp_max_queue_depth; 188 uint8_t isp_tag_aging; 189 uint8_t isp_bus_reset_delay; 190 uint8_t isp_retry_count; 191 uint8_t isp_retry_delay; 192 struct { 193 uint32_t 194 exc_throttle : 8, 195 : 1, 196 dev_enable : 1, /* ignored */ 197 dev_update : 1, 198 dev_refresh : 1, 199 actv_offset : 4, 200 goal_offset : 4, 201 nvrm_offset : 4; 202 uint8_t actv_period; /* current sync period */ 203 uint8_t goal_period; /* goal sync period */ 204 uint8_t nvrm_period; /* nvram sync period */ 205 uint16_t actv_flags; /* current device flags */ 206 uint16_t goal_flags; /* goal device flags */ 207 uint16_t nvrm_flags; /* nvram device flags */ 208 } isp_devparam[MAX_TARGETS]; 209} sdparam; 210 211/* 212 * Device Flags 213 */ 214#define DPARM_DISC 0x8000 215#define DPARM_PARITY 0x4000 216#define DPARM_WIDE 0x2000 217#define DPARM_SYNC 0x1000 218#define DPARM_TQING 0x0800 219#define DPARM_ARQ 0x0400 220#define DPARM_QFRZ 0x0200 221#define DPARM_RENEG 0x0100 222#define DPARM_NARROW 0x0080 223#define DPARM_ASYNC 0x0040 224#define DPARM_PPR 0x0020 225#define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ) 226#define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING)) 227 228/* technically, not really correct, as they need to be rated based upon clock */ 229#define ISP_80M_SYNCPARMS 0x0c09 230#define ISP_40M_SYNCPARMS 0x0c0a 231#define ISP_20M_SYNCPARMS 0x0c0c 232#define ISP_20M_SYNCPARMS_1040 0x080c 233#define ISP_10M_SYNCPARMS 0x0c19 234#define ISP_08M_SYNCPARMS 0x0c25 235#define ISP_05M_SYNCPARMS 0x0c32 236#define ISP_04M_SYNCPARMS 0x0c41 237 238/* 239 * Fibre Channel Specifics 240 */ 241/* These are for non-2K Login Firmware cards */ 242#define FL_ID 0x7e /* FL_Port Special ID */ 243#define SNS_ID 0x80 /* SNS Server Special ID */ 244#define NPH_MAX 0xfe 245 246/* These are for 2K Login Firmware cards */ 247#define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */ 248#define NPH_MGT_ID 0x7FA /* Management Server Special ID */ 249#define NPH_SNS_ID 0x7FC /* SNS Server Special ID */ 250#define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */ 251#define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */ 252#define NPH_IP_BCST 0x7FF /* IP Broadcast Special ID (0xFFFFFF) */ 253#define NPH_MAX_2K 0x800 254 255/* 256 * "Unassigned" handle to be used internally 257 */ 258#define NIL_HANDLE 0xffff 259 260/* 261 * Limit for devices on an arbitrated loop. 262 */ 263#define LOCAL_LOOP_LIM 126 264 265/* 266 * Limit for (2K login) N-port handle amounts 267 */ 268#define MAX_NPORT_HANDLE 2048 269 270/* 271 * Special Constants 272 */ 273#define INI_NONE ((uint64_t) 0) 274#define ISP_NOCHAN 0xff 275 276/* 277 * Special Port IDs 278 */ 279#define MANAGEMENT_PORT_ID 0xFFFFFA 280#define SNS_PORT_ID 0xFFFFFC 281#define FABRIC_PORT_ID 0xFFFFFE 282#define PORT_ANY 0xFFFFFF 283#define PORT_NONE 0 284#define VALID_PORT(port) (port != PORT_NONE && port != PORT_ANY) 285#define DOMAIN_CONTROLLER_BASE 0xFFFC00 286#define DOMAIN_CONTROLLER_END 0xFFFCFF 287 288/* 289 * Command Handles 290 * 291 * Most QLogic initiator or target have 32 bit handles associated with them. 292 * We want to have a quick way to index back and forth between a local SCSI 293 * command context and what the firmware is passing back to us. We also 294 * want to avoid working on stale information. This structure handles both 295 * at the expense of some local memory. 296 * 297 * The handle is architected thusly: 298 * 299 * 0 means "free handle" 300 * bits 0..12 index commands 301 * bits 13..15 bits index usage 302 * bits 16..31 contain a rolling sequence 303 * 304 * 305 */ 306typedef struct { 307 void * cmd; /* associated command context */ 308 uint32_t handle; /* handle associated with this command */ 309} isp_hdl_t; 310#define ISP_HANDLE_FREE 0x00000000 311#define ISP_HANDLE_CMD_MASK 0x00001fff 312#define ISP_HANDLE_USAGE_MASK 0x0000e000 313#define ISP_HANDLE_USAGE_SHIFT 13 314#define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT) 315# define ISP_HANDLE_NONE 0 316# define ISP_HANDLE_INITIATOR 1 317# define ISP_HANDLE_TARGET 2 318#define ISP_HANDLE_SEQ_MASK 0xffff0000 319#define ISP_HANDLE_SEQ_SHIFT 16 320#define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT) 321#define ISP_VALID_INI_HANDLE(c, hdl) \ 322 (ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR && (hdl & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \ 323 ISP_H2SEQ(hdl) == ISP_H2SEQ((c)->isp_xflist[hdl & ISP_HANDLE_CMD_MASK].handle)) 324#ifdef ISP_TARGET_MODE 325#define ISP_VALID_TGT_HANDLE(c, hdl) \ 326 (ISP_H2HT(hdl) == ISP_HANDLE_TARGET && (hdl & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \ 327 ISP_H2SEQ(hdl) == ISP_H2SEQ((c)->isp_tgtlist[hdl & ISP_HANDLE_CMD_MASK].handle)) 328#define ISP_VALID_HANDLE(c, hdl) \ 329 (ISP_VALID_INI_HANDLE((c), hdl) || ISP_VALID_TGT_HANDLE((c), hdl)) 330#else 331#define ISP_VALID_HANDLE ISP_VALID_INI_HANDLE 332#endif 333#define ISP_BAD_HANDLE_INDEX 0xffffffff 334 335 336/* 337 * FC Port Database entry. 338 * 339 * It has a handle that the f/w uses to address commands to a device. 340 * This handle's value may be assigned by the firmware (e.g., for local loop 341 * devices) or by the driver (e.g., for fabric devices). 342 * 343 * It has a state. If the state if VALID, that means that we've logged into 344 * the device. 345 * 346 * Local loop devices the firmware automatically performs PLOGI on for us 347 * (which is why that handle is imposed upon us). Fabric devices we assign 348 * a handle to and perform the PLOGI on. 349 * 350 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID 351 * entries as PROBATIONAL. This allows us, if policy says to, just keep track 352 * of devices whose handles change but are otherwise the same device (and 353 * thus keep 'target' constant). 354 * 355 * In any case, we search all possible local loop handles. For each one that 356 * has a port database entity returned, we search for any PROBATIONAL entry 357 * that matches it and update as appropriate. Otherwise, as a new entry, we 358 * find room for it in the Port Database. We *try* and use the handle as the 359 * index to put it into the Database, but that's just an optimization. We mark 360 * the entry VALID and make sure that the target index is updated and correct. 361 * 362 * When we get done searching the local loop, we then search similarily for 363 * a list of devices we've gotten from the fabric name controller (if we're 364 * on a fabric). VALID marking is also done similarily. 365 * 366 * When all of this is done, we can march through the database and clean up 367 * any entry that is still PROBATIONAL (these represent devices which have 368 * departed). Then we're done and can resume normal operations. 369 * 370 * Negative invariants that we try and test for are: 371 * 372 * + There can never be two non-NIL entries with the same { Port, Node } WWN 373 * duples. 374 * 375 * + There can never be two non-NIL entries with the same handle. 376 */ 377typedef struct { 378 /* 379 * This is the handle that the firmware needs in order for us to 380 * send commands to the device. For pre-24XX cards, this would be 381 * the 'loopid'. 382 */ 383 uint16_t handle; 384 385 /* 386 * A device is 'autologin' if the firmware automatically logs into 387 * it (re-logins as needed). Basically, local private loop devices. 388 * 389 * PRLI word 3 parameters contains role as well as other things. 390 * 391 * The state is the current state of this entry. 392 * 393 * The is_target is the current state of target on this port. 394 * 395 * The is_initiator is the current state of initiator on this port. 396 * 397 * Portid is obvious, as are node && port WWNs. The new_role and 398 * new_portid is for when we are pending a change. 399 */ 400 uint16_t prli_word3; /* PRLI parameters */ 401 uint16_t new_prli_word3; /* Incoming new PRLI parameters */ 402 uint16_t : 11, 403 autologin : 1, /* F/W does PLOGI/PLOGO */ 404 probational : 1, 405 state : 3; 406 uint32_t : 6, 407 is_target : 1, 408 is_initiator : 1, 409 portid : 24; 410 uint32_t 411 : 8, 412 new_portid : 24; 413 uint64_t node_wwn; 414 uint64_t port_wwn; 415 uint32_t gone_timer; 416} fcportdb_t; 417 418#define FC_PORTDB_STATE_NIL 0 /* Empty DB slot */ 419#define FC_PORTDB_STATE_DEAD 1 /* Was valid, but no more. */ 420#define FC_PORTDB_STATE_CHANGED 2 /* Was valid, but changed. */ 421#define FC_PORTDB_STATE_NEW 3 /* Logged in, not announced. */ 422#define FC_PORTDB_STATE_ZOMBIE 4 /* Invalid, but announced. */ 423#define FC_PORTDB_STATE_VALID 5 /* Valid */ 424 425#define FC_PORTDB_TGT(isp, bus, pdb) (int)(lp - FCPARAM(isp, bus)->portdb) 426 427/* 428 * FC card specific information 429 * 430 * This structure is replicated across multiple channels for multi-id 431 * capapble chipsets, with some entities different on a per-channel basis. 432 */ 433 434typedef struct { 435 int isp_gbspeed; /* Connection speed */ 436 int isp_linkstate; /* Link state */ 437 int isp_fwstate; /* ISP F/W state */ 438 int isp_loopstate; /* Loop State */ 439 int isp_topo; /* Connection Type */ 440 441 uint32_t : 3, 442 fctape_enabled : 1, 443 sendmarker : 1, 444 loop_seen_once : 1, 445 role : 2, 446 isp_portid : 24; /* S_ID */ 447 448 uint16_t isp_fwoptions; 449 uint16_t isp_xfwoptions; 450 uint16_t isp_zfwoptions; 451 uint16_t isp_loopid; /* hard loop id */ 452 uint16_t isp_sns_hdl; /* N-port handle for SNS */ 453 uint16_t isp_lasthdl; /* only valid for channel 0 */ 454 uint16_t isp_maxalloc; 455 uint16_t isp_fabric_params; 456 uint8_t isp_retry_delay; 457 uint8_t isp_retry_count; 458 459 /* 460 * Current active WWNN/WWPN 461 */ 462 uint64_t isp_wwnn; 463 uint64_t isp_wwpn; 464 465 /* 466 * NVRAM WWNN/WWPN 467 */ 468 uint64_t isp_wwnn_nvram; 469 uint64_t isp_wwpn_nvram; 470 471 /* 472 * Our Port Data Base 473 */ 474 fcportdb_t portdb[MAX_FC_TARG]; 475 476 /* 477 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 478 */ 479 void * isp_scratch; 480 XS_DMA_ADDR_T isp_scdma; 481} fcparam; 482 483#define FW_CONFIG_WAIT 0 484#define FW_WAIT_LINK 1 485#define FW_WAIT_LOGIN 2 486#define FW_READY 3 487#define FW_LOSS_OF_SYNC 4 488#define FW_ERROR 5 489#define FW_REINIT 6 490#define FW_NON_PART 7 491 492#define LOOP_NIL 0 493#define LOOP_TESTING_LINK 1 494#define LOOP_LTEST_DONE 2 495#define LOOP_SCANNING_LOOP 3 496#define LOOP_LSCAN_DONE 4 497#define LOOP_SCANNING_FABRIC 5 498#define LOOP_FSCAN_DONE 6 499#define LOOP_SYNCING_PDB 7 500#define LOOP_READY 8 501 502#define TOPO_NL_PORT 0 503#define TOPO_FL_PORT 1 504#define TOPO_N_PORT 2 505#define TOPO_F_PORT 3 506#define TOPO_PTP_STUB 4 507 508#define TOPO_IS_FABRIC(x) ((x) == TOPO_FL_PORT || (x) == TOPO_F_PORT) 509 510/* 511 * Soft Structure per host adapter 512 */ 513struct ispsoftc { 514 /* 515 * Platform (OS) specific data 516 */ 517 struct isposinfo isp_osinfo; 518 519 /* 520 * Pointer to bus specific functions and data 521 */ 522 struct ispmdvec * isp_mdvec; 523 524 /* 525 * (Mostly) nonvolatile state. Board specific parameters 526 * may contain some volatile state (e.g., current loop state). 527 */ 528 529 void * isp_param; /* type specific */ 530 uint64_t isp_fwattr; /* firmware attributes */ 531 uint16_t isp_fwrev[3]; /* Loaded F/W revision */ 532 uint16_t isp_maxcmds; /* max possible I/O cmds */ 533 uint8_t isp_type; /* HBA Chip Type */ 534 uint8_t isp_revision; /* HBA Chip H/W Revision */ 535 uint16_t isp_nchan; /* number of channels */ 536 uint32_t isp_maxluns; /* maximum luns supported */ 537 538 uint32_t isp_clock : 8, /* input clock */ 539 : 4, 540 isp_port : 1, /* 23XX/24XX only */ 541 isp_open : 1, /* opened (ioctl) */ 542 isp_bustype : 1, /* SBus or PCI */ 543 isp_loaded_fw : 1, /* loaded firmware */ 544 isp_dblev : 16; /* debug log mask */ 545 546 547 uint32_t isp_confopts; /* config options */ 548 549 uint32_t isp_rqstinrp; /* register for REQINP */ 550 uint32_t isp_rqstoutrp; /* register for REQOUTP */ 551 uint32_t isp_respinrp; /* register for RESINP */ 552 uint32_t isp_respoutrp; /* register for RESOUTP */ 553 554 /* 555 * Instrumentation 556 */ 557 uint64_t isp_intcnt; /* total int count */ 558 uint64_t isp_intbogus; /* spurious int count */ 559 uint64_t isp_intmboxc; /* mbox completions */ 560 uint64_t isp_intoasync; /* other async */ 561 uint64_t isp_rsltccmplt; /* CMDs on result q */ 562 uint64_t isp_fphccmplt; /* CMDs via fastpost */ 563 uint16_t isp_rscchiwater; 564 uint16_t isp_fpcchiwater; 565 NANOTIME_T isp_init_time; /* time were last initialized */ 566 567 /* 568 * Volatile state 569 */ 570 571 volatile uint32_t : 8, 572 : 2, 573 isp_dead : 1, 574 : 1, 575 isp_mboxbsy : 1, /* mailbox command active */ 576 isp_state : 3, 577 isp_nactive : 16; /* how many commands active */ 578 volatile mbreg_t isp_curmbx; /* currently active mailbox command */ 579 volatile uint32_t isp_reqodx; /* index of last ISP pickup */ 580 volatile uint32_t isp_reqidx; /* index of next request */ 581 volatile uint32_t isp_residx; /* index of last ISP write */ 582 volatile uint32_t isp_resodx; /* index of next result */ 583 volatile uint32_t isp_atioodx; /* index of next ATIO */ 584 volatile uint32_t isp_obits; /* mailbox command output */ 585 volatile uint32_t isp_serno; /* rolling serial number */ 586 volatile uint16_t isp_mboxtmp[MAX_MAILBOX]; 587 volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */ 588 volatile uint16_t isp_mbxwrk0; 589 volatile uint16_t isp_mbxwrk1; 590 volatile uint16_t isp_mbxwrk2; 591 volatile uint16_t isp_mbxwrk8; 592 volatile uint16_t isp_seqno; /* running sequence number */ 593 void * isp_mbxworkp; 594 595 /* 596 * Active commands are stored here, indexed by handle functions. 597 */ 598 isp_hdl_t *isp_xflist; 599 isp_hdl_t *isp_xffree; 600 601#ifdef ISP_TARGET_MODE 602 /* 603 * Active target commands are stored here, indexed by handle functions. 604 */ 605 isp_hdl_t *isp_tgtlist; 606 isp_hdl_t *isp_tgtfree; 607#endif 608 609 /* 610 * request/result queue pointers and DMA handles for them. 611 */ 612 void * isp_rquest; 613 void * isp_result; 614 XS_DMA_ADDR_T isp_rquest_dma; 615 XS_DMA_ADDR_T isp_result_dma; 616#ifdef ISP_TARGET_MODE 617 /* for 24XX only */ 618 void * isp_atioq; 619 XS_DMA_ADDR_T isp_atioq_dma; 620#endif 621}; 622 623#define SDPARAM(isp, chan) (&((sdparam *)(isp)->isp_param)[(chan)]) 624#define FCPARAM(isp, chan) (&((fcparam *)(isp)->isp_param)[(chan)]) 625 626#define ISP_SET_SENDMARKER(isp, chan, val) \ 627 if (IS_FC(isp)) { \ 628 FCPARAM(isp, chan)->sendmarker = val; \ 629 } else { \ 630 SDPARAM(isp, chan)->sendmarker = val; \ 631 } 632 633#define ISP_TST_SENDMARKER(isp, chan) \ 634 (IS_FC(isp)? \ 635 FCPARAM(isp, chan)->sendmarker != 0 : \ 636 SDPARAM(isp, chan)->sendmarker != 0) 637 638/* 639 * ISP Driver Run States 640 */ 641#define ISP_NILSTATE 0 642#define ISP_CRASHED 1 643#define ISP_RESETSTATE 2 644#define ISP_INITSTATE 3 645#define ISP_RUNSTATE 4 646 647/* 648 * ISP Runtime Configuration Options 649 */ 650#define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 651#define ISP_CFG_PORT_PREF 0x0c /* Mask for Port Prefs (all FC except 2100) */ 652#define ISP_CFG_LPORT 0x00 /* prefer {N/F}L-Port connection */ 653#define ISP_CFG_NPORT 0x04 /* prefer {N/F}-Port connection */ 654#define ISP_CFG_NPORT_ONLY 0x08 /* insist on {N/F}-Port connection */ 655#define ISP_CFG_LPORT_ONLY 0x0c /* insist on {N/F}L-Port connection */ 656#define ISP_CFG_ONEGB 0x10 /* force 1GB connection (23XX only) */ 657#define ISP_CFG_TWOGB 0x20 /* force 2GB connection (23XX only) */ 658#define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 659#define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 660#define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */ 661#define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */ 662#define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */ 663#define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */ 664#define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */ 665#define ISP_CFG_FOURGB 0x2000 /* force 4GB connection (24XX only) */ 666#define ISP_CFG_EIGHTGB 0x4000 /* force 8GB connection (25XX only) */ 667#define ISP_CFG_SIXTEENGB 0x8000 /* force 16GB connection (82XX only) */ 668 669/* 670 * For each channel, the outer layers should know what role that channel 671 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET, 672 * ISP_ROLE_BOTH. 673 * 674 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded, 675 * NVRAM read, and defaults set, but any further initialization (e.g. 676 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done. 677 * 678 * If INITIATOR MODE isn't set, attempts to run commands will be stopped 679 * at isp_start and completed with the equivalent of SELECTION TIMEOUT. 680 * 681 * If TARGET MODE is set, it doesn't mean that the rest of target mode support 682 * needs to be enabled, or will even work. What happens with the 2X00 cards 683 * here is that if you have enabled it with TARGET MODE as part of the ICB 684 * options, but you haven't given the f/w any ram resources for ATIOs or 685 * Immediate Notifies, the f/w just handles what it can and you never see 686 * anything. Basically, it sends a single byte of data (the first byte, 687 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for 688 * INQUIRY, and sends back QUEUE FULL status for any other command. 689 * 690 */ 691#define ISP_ROLE_NONE 0x0 692#define ISP_ROLE_TARGET 0x1 693#define ISP_ROLE_INITIATOR 0x2 694#define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR) 695#define ISP_ROLE_EITHER ISP_ROLE_BOTH 696#ifndef ISP_DEFAULT_ROLES 697/* 698 * Counterintuitively, we prefer to default to role 'none' 699 * if we are enable target mode support. This gives us the 700 * maximum flexibility as to which port will do what. 701 */ 702#ifdef ISP_TARGET_MODE 703#define ISP_DEFAULT_ROLES ISP_ROLE_NONE 704#else 705#define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR 706#endif 707#endif 708 709 710/* 711 * Firmware related defines 712 */ 713#define ISP_CODE_ORG 0x1000 /* default f/w code start */ 714#define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */ 715#define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */ 716#define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 717#define ISP_FW_MAJOR(code) ((code >> 24) & 0xff) 718#define ISP_FW_MINOR(code) ((code >> 16) & 0xff) 719#define ISP_FW_MICRO(code) ((code >> 8) & 0xff) 720#define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 721#define ISP_FW_MAJORX(xp) (xp[0]) 722#define ISP_FW_MINORX(xp) (xp[1]) 723#define ISP_FW_MICROX(xp) (xp[2]) 724#define ISP_FW_NEWER_THAN(i, major, minor, micro) \ 725 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro)) 726#define ISP_FW_OLDER_THAN(i, major, minor, micro) \ 727 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro)) 728 729/* 730 * Bus (implementation) types 731 */ 732#define ISP_BT_PCI 0 /* PCI Implementations */ 733#define ISP_BT_SBUS 1 /* SBus Implementations */ 734 735/* 736 * If we have not otherwise defined SBus support away make sure 737 * it is defined here such that the code is included as default 738 */ 739#ifndef ISP_SBUS_SUPPORTED 740#define ISP_SBUS_SUPPORTED 1 741#endif 742 743/* 744 * Chip Types 745 */ 746#define ISP_HA_SCSI 0xf 747#define ISP_HA_SCSI_UNKNOWN 0x1 748#define ISP_HA_SCSI_1020 0x2 749#define ISP_HA_SCSI_1020A 0x3 750#define ISP_HA_SCSI_1040 0x4 751#define ISP_HA_SCSI_1040A 0x5 752#define ISP_HA_SCSI_1040B 0x6 753#define ISP_HA_SCSI_1040C 0x7 754#define ISP_HA_SCSI_1240 0x8 755#define ISP_HA_SCSI_1080 0x9 756#define ISP_HA_SCSI_1280 0xa 757#define ISP_HA_SCSI_10160 0xb 758#define ISP_HA_SCSI_12160 0xc 759#define ISP_HA_FC 0xf0 760#define ISP_HA_FC_2100 0x10 761#define ISP_HA_FC_2200 0x20 762#define ISP_HA_FC_2300 0x30 763#define ISP_HA_FC_2312 0x40 764#define ISP_HA_FC_2322 0x50 765#define ISP_HA_FC_2400 0x60 766#define ISP_HA_FC_2500 0x70 767 768#define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI) 769#define IS_1020(isp) (isp->isp_type < ISP_HA_SCSI_1240) 770#define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240) 771#define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080) 772#define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280) 773#define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160) 774#define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160) 775 776#define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp)) 777#define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp)) 778#define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp)) 779#define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp)) 780#define IS_ULTRA3(isp) (IS_1X160(isp)) 781 782#define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC) 783#define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100) 784#define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200) 785#define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300 && \ 786 (isp)->isp_type < ISP_HA_FC_2400) 787#define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300) 788#define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312) 789#define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322) 790#define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400) 791#define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500) 792 793/* 794 * DMA related macros 795 */ 796#define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff) 797#define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff) 798#define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff) 799#define DMA_WD0(x) ((uint16_t)((x) & 0xffff)) 800 801#define DMA_LO32(x) ((uint32_t) (x)) 802#define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32)) 803 804/* 805 * Core System Function Prototypes 806 */ 807 808/* 809 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init. 810 */ 811void isp_reset(ispsoftc_t *, int); 812 813/* 814 * Initialize Hardware to known state 815 */ 816void isp_init(ispsoftc_t *); 817 818/* 819 * Reset the ISP and call completion for any orphaned commands. 820 */ 821int isp_reinit(ispsoftc_t *, int); 822 823/* 824 * Internal Interrupt Service Routine 825 * 826 * The outer layers do the spade work to get the appropriate status register, 827 * semaphore register and first mailbox register (if appropriate). This also 828 * means that most spurious/bogus interrupts not for us can be filtered first. 829 */ 830void isp_intr(ispsoftc_t *, uint16_t, uint16_t, uint16_t); 831 832 833/* 834 * Command Entry Point- Platform Dependent layers call into this 835 */ 836int isp_start(XS_T *); 837 838/* these values are what isp_start returns */ 839#define CMD_COMPLETE 101 /* command completed */ 840#define CMD_EAGAIN 102 /* busy- maybe retry later */ 841#define CMD_QUEUED 103 /* command has been queued for execution */ 842#define CMD_RQLATER 104 /* requeue this command later */ 843 844/* 845 * Command Completion Point- Core layers call out from this with completed cmds 846 */ 847void isp_done(XS_T *); 848 849/* 850 * Platform Dependent to External to Internal Control Function 851 * 852 * Assumes locks are held on entry. You should note that with many of 853 * these commands locks may be released while this function is called. 854 * 855 * ... ISPCTL_RESET_BUS, int channel); 856 * Reset BUS on this channel 857 * ... ISPCTL_RESET_DEV, int channel, int target); 858 * Reset Device on this channel at this target. 859 * ... ISPCTL_ABORT_CMD, XS_T *xs); 860 * Abort active transaction described by xs. 861 * ... IPCTL_UPDATE_PARAMS); 862 * Update any operating parameters (speed, etc.) 863 * ... ISPCTL_FCLINK_TEST, int channel); 864 * Test FC link status on this channel 865 * ... ISPCTL_SCAN_LOOP, int channel); 866 * Scan local loop on this channel 867 * ... ISPCTL_SCAN_FABRIC, int channel); 868 * Scan fabric on this channel 869 * ... ISPCTL_PDB_SYNC, int channel); 870 * Synchronize port database on this channel 871 * ... ISPCTL_SEND_LIP, int channel); 872 * Send a LIP on this channel 873 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn) 874 * Get a WWNN/WWPN for this N-port handle on this channel 875 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp) 876 * Run this mailbox command 877 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb) 878 * Get PDB on this channel for this N-port handle 879 * ... ISPCTL_PLOGX, isp_plcmd_t *) 880 * Performa a port login/logout 881 * ... ISPCTL_CHANGE_ROLE, int channel, int role); 882 * Change role of specified channel 883 * 884 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in 885 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_LOOP, and ISPCTL_SCAN_FABRIC. 886 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging 887 * and logging out of fabric devices (if one is on a fabric) and then marking 888 * the 'loop state' as being ready to now be used for sending commands to 889 * devices. 890 */ 891typedef enum { 892 ISPCTL_RESET_BUS, 893 ISPCTL_RESET_DEV, 894 ISPCTL_ABORT_CMD, 895 ISPCTL_UPDATE_PARAMS, 896 ISPCTL_FCLINK_TEST, 897 ISPCTL_SCAN_FABRIC, 898 ISPCTL_SCAN_LOOP, 899 ISPCTL_PDB_SYNC, 900 ISPCTL_SEND_LIP, 901 ISPCTL_GET_NAMES, 902 ISPCTL_RUN_MBOXCMD, 903 ISPCTL_GET_PDB, 904 ISPCTL_PLOGX, 905 ISPCTL_CHANGE_ROLE 906} ispctl_t; 907int isp_control(ispsoftc_t *, ispctl_t, ...); 908 909/* 910 * Platform Dependent to Internal to External Control Function 911 */ 912 913typedef enum { 914 ISPASYNC_NEW_TGT_PARAMS, /* SPI New Target Parameters */ 915 ISPASYNC_BUS_RESET, /* All Bus Was Reset */ 916 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 917 ISPASYNC_LOOP_UP, /* FC Loop Up */ 918 ISPASYNC_LIP, /* FC LIP Received */ 919 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */ 920 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */ 921 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */ 922 ISPASYNC_DEV_CHANGED, /* FC Device Changed */ 923 ISPASYNC_DEV_STAYED, /* FC Device Stayed */ 924 ISPASYNC_DEV_GONE, /* FC Device Departure */ 925 ISPASYNC_TARGET_NOTIFY, /* All target async notification */ 926 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */ 927 ISPASYNC_TARGET_ACTION, /* All target action requested */ 928 ISPASYNC_FW_CRASH, /* All Firmware has crashed */ 929 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */ 930} ispasync_t; 931void isp_async(ispsoftc_t *, ispasync_t, ...); 932 933#define ISPASYNC_CHANGE_PDB 0 934#define ISPASYNC_CHANGE_SNS 1 935#define ISPASYNC_CHANGE_OTHER 2 936 937/* 938 * Platform Independent Error Prinout 939 */ 940void isp_prt_endcmd(ispsoftc_t *, XS_T *); 941 942/* 943 * Platform Dependent Error and Debug Printout 944 * 945 * Two required functions for each platform must be provided: 946 * 947 * void isp_prt(ispsoftc_t *, int level, const char *, ...) 948 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...) 949 * 950 * but due to compiler differences on different platforms this won't be 951 * formally defined here. Instead, they go in each platform definition file. 952 */ 953 954#define ISP_LOGALL 0x0 /* log always */ 955#define ISP_LOGCONFIG 0x1 /* log configuration messages */ 956#define ISP_LOGINFO 0x2 /* log informational messages */ 957#define ISP_LOGWARN 0x4 /* log warning messages */ 958#define ISP_LOGERR 0x8 /* log error messages */ 959#define ISP_LOGDEBUG0 0x10 /* log simple debug messages */ 960#define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */ 961#define ISP_LOGDEBUG2 0x40 /* log most debug messages */ 962#define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */ 963#define ISP_LOG_SANCFG 0x100 /* log SAN configuration */ 964#define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */ 965#define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */ 966#define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */ 967#define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */ 968#define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */ 969#define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */ 970 971/* 972 * Each Platform provides it's own isposinfo substructure of the ispsoftc 973 * defined above. 974 * 975 * Each platform must also provide the following macros/defines: 976 * 977 * 978 * ISP_FC_SCRLEN FC scratch area DMA length 979 * 980 * ISP_MEMZERO(dst, src) platform zeroing function 981 * ISP_MEMCPY(dst, src, count) platform copying function 982 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf 983 * ISP_DELAY(usecs) microsecond spindelay function 984 * ISP_SLEEP(isp, usecs) microsecond sleep function 985 * 986 * ISP_INLINE ___inline or not- depending on how 987 * good your debugger is 988 * ISP_MIN shorthand for ((a) < (b))? (a) : (b) 989 * 990 * NANOTIME_T nanosecond time type 991 * 992 * GET_NANOTIME(NANOTIME_T *) get current nanotime. 993 * 994 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T 995 * 996 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *) 997 * subtract two NANOTIME_T values 998 * 999 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size 1000 * for this particular board type 1001 * 1002 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan) 1003 * 1004 * Function/Macro the provides memory synchronization on 1005 * various objects so that the ISP's and the system's view 1006 * of the same object is consistent. 1007 * 1008 * MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs 1009 * MBOX_WAIT_COMPLETE(ispsoftc_t *, mbreg_t *) wait for cmd to be done 1010 * MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee 1011 * MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs 1012 * 1013 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area 1014 * return -1 if you cannot 1015 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area 1016 * 1017 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null. 1018 * 1019 * SCSI_GOOD SCSI 'Good' Status 1020 * SCSI_CHECK SCSI 'Check Condition' Status 1021 * SCSI_BUSY SCSI 'Busy' Status 1022 * SCSI_QFULL SCSI 'Queue Full' Status 1023 * 1024 * XS_T Platform SCSI transaction type (i.e., command for HBA) 1025 * XS_DMA_ADDR_T Platform PCI DMA Address Type 1026 * XS_GET_DMA_SEG(..) Get 32 bit dma segment list value 1027 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value 1028 * XS_ISP(xs) gets an instance out of an XS_T 1029 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) "" 1030 * XS_TGT(xs) gets the target "" 1031 * XS_LUN(xs) gets the lun "" 1032 * XS_CDBP(xs) gets a pointer to the scsi CDB "" 1033 * XS_CDBLEN(xs) gets the CDB's length "" 1034 * XS_XFRLEN(xs) gets the associated data transfer length "" 1035 * XS_TIME(xs) gets the time (in milliseconds) for this command 1036 * XS_GET_RESID(xs) gets the current residual count 1037 * XS_GET_RESID(xs, resid) sets the current residual count 1038 * XS_STSP(xs) gets a pointer to the SCSI status byte "" 1039 * XS_SNSP(xs) gets a pointer to the associate sense data 1040 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage 1041 * XS_CUR_SNSLEN(xs) gets the currently used lenght of sense data storage 1042 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key 1043 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code 1044 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier 1045 * XS_TAG_P(xs) predicate of whether this command should be tagged 1046 * XS_TAG_TYPE(xs) which type of tag to use 1047 * XS_SETERR(xs) set error state 1048 * 1049 * HBA_NOERROR command has no erros 1050 * HBA_BOTCH hba botched something 1051 * HBA_CMDTIMEOUT command timed out 1052 * HBA_SELTIMEOUT selection timed out (also port logouts for FC) 1053 * HBA_TGTBSY target returned a BUSY status 1054 * HBA_BUSRESET bus reset destroyed command 1055 * HBA_ABORTED command was aborted (by request) 1056 * HBA_DATAOVR a data overrun was detected 1057 * HBA_ARQFAIL Automatic Request Sense failed 1058 * 1059 * XS_ERR(xs) return current error state 1060 * XS_NOERR(xs) there is no error currently set 1061 * XS_INITERR(xs) initialize error state 1062 * 1063 * XS_SAVE_SENSE(xs, sp, total_len, this_len) save sense data (total and current amount) 1064 * 1065 * XS_APPEND_SENSE(xs, sp, len) append more sense data 1066 * 1067 * XS_SENSE_VALID(xs) indicates whether sense is valid 1068 * 1069 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size 1070 * DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle 1071 * 1072 * DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel 1073 * DEFAULT_IID(ispsoftc_t *, int) Default SCSI initiator ID 1074 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID 1075 * 1076 * These establish reasonable defaults for each platform. 1077 * These must be available independent of card NVRAM and are 1078 * to be used should NVRAM not be readable. 1079 * 1080 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use 1081 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use 1082 * 1083 * These defines are hooks to allow the setting of node and 1084 * port WWNs when NVRAM cannot be read or is to be overriden. 1085 * 1086 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use 1087 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use 1088 * 1089 * After NVRAM is read, these will be invoked to get the 1090 * node and port WWNs that will actually be used for this 1091 * channel. 1092 * 1093 * 1094 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr) 1095 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr) 1096 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr) 1097 * 1098 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval) 1099 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval) 1100 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval) 1101 * 1102 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *) 1103 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *) 1104 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval) 1105 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval) 1106 */ 1107 1108#ifdef ISP_TARGET_MODE 1109/* 1110 * The functions below are for the publicly available 1111 * target mode functions that are internal to the Qlogic driver. 1112 */ 1113 1114/* 1115 * This function handles new response queue entry appropriate for target mode. 1116 */ 1117int isp_target_notify(ispsoftc_t *, void *, uint32_t *); 1118 1119/* 1120 * This function externalizes the ability to acknowledge an Immediate Notify request. 1121 */ 1122int isp_notify_ack(ispsoftc_t *, void *); 1123 1124/* 1125 * This function externalized acknowledging (success/fail) an ABTS frame 1126 */ 1127int isp_acknak_abts(ispsoftc_t *, void *, int); 1128 1129/* 1130 * General request queue 'put' routine for target mode entries. 1131 */ 1132int isp_target_put_entry(ispsoftc_t *isp, void *); 1133 1134/* 1135 * General routine to put back an ATIO entry- 1136 * used for replenishing f/w resource counts. 1137 * The argument is a pointer to a source ATIO 1138 * or ATIO2. 1139 */ 1140int isp_target_put_atio(ispsoftc_t *, void *); 1141 1142/* 1143 * General routine to send a final CTIO for a command- used mostly for 1144 * local responses. 1145 */ 1146int isp_endcmd(ispsoftc_t *, ...); 1147#define ECMD_SVALID 0x100 1148#define ECMD_TERMINATE 0x200 1149 1150/* 1151 * Handle an asynchronous event 1152 * 1153 * Return nonzero if the interrupt that generated this event has been dismissed. 1154 */ 1155int isp_target_async(ispsoftc_t *, int, int); 1156#endif 1157#endif /* _ISPVAR_H */ 1158