if_lem.h revision 302408
1/****************************************************************************** 2 3 Copyright (c) 2001-2015, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32******************************************************************************/ 33/*$FreeBSD: stable/11/sys/dev/e1000/if_lem.h 295906 2016-02-23 01:19:26Z marius $*/ 34 35 36#ifndef _LEM_H_DEFINED_ 37#define _LEM_H_DEFINED_ 38 39 40/* Tunables */ 41 42/* 43 * EM_TXD: Maximum number of Transmit Descriptors 44 * Valid Range: 80-256 for 82542 and 82543-based adapters 45 * 80-4096 for others 46 * Default Value: 256 47 * This value is the number of transmit descriptors allocated by the driver. 48 * Increasing this value allows the driver to queue more transmits. Each 49 * descriptor is 16 bytes. 50 * Since TDLEN should be multiple of 128bytes, the number of transmit 51 * desscriptors should meet the following condition. 52 * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 53 */ 54#define EM_MIN_TXD 80 55#define EM_MAX_TXD_82543 256 56#define EM_MAX_TXD 4096 57#define EM_DEFAULT_TXD EM_MAX_TXD_82543 58 59/* 60 * EM_RXD - Maximum number of receive Descriptors 61 * Valid Range: 80-256 for 82542 and 82543-based adapters 62 * 80-4096 for others 63 * Default Value: 256 64 * This value is the number of receive descriptors allocated by the driver. 65 * Increasing this value allows the driver to buffer more incoming packets. 66 * Each descriptor is 16 bytes. A receive buffer is also allocated for each 67 * descriptor. The maximum MTU size is 16110. 68 * Since TDLEN should be multiple of 128bytes, the number of transmit 69 * desscriptors should meet the following condition. 70 * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 71 */ 72#define EM_MIN_RXD 80 73#define EM_MAX_RXD_82543 256 74#define EM_MAX_RXD 4096 75#define EM_DEFAULT_RXD EM_MAX_RXD_82543 76 77/* 78 * EM_TIDV - Transmit Interrupt Delay Value 79 * Valid Range: 0-65535 (0=off) 80 * Default Value: 64 81 * This value delays the generation of transmit interrupts in units of 82 * 1.024 microseconds. Transmit interrupt reduction can improve CPU 83 * efficiency if properly tuned for specific network traffic. If the 84 * system is reporting dropped transmits, this value may be set too high 85 * causing the driver to run out of available transmit descriptors. 86 */ 87#define EM_TIDV 64 88 89/* 90 * EM_TADV - Transmit Absolute Interrupt Delay Value 91 * (Not valid for 82542/82543/82544) 92 * Valid Range: 0-65535 (0=off) 93 * Default Value: 64 94 * This value, in units of 1.024 microseconds, limits the delay in which a 95 * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, 96 * this value ensures that an interrupt is generated after the initial 97 * packet is sent on the wire within the set amount of time. Proper tuning, 98 * along with EM_TIDV, may improve traffic throughput in specific 99 * network conditions. 100 */ 101#define EM_TADV 64 102 103/* 104 * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) 105 * Valid Range: 0-65535 (0=off) 106 * Default Value: 0 107 * This value delays the generation of receive interrupts in units of 1.024 108 * microseconds. Receive interrupt reduction can improve CPU efficiency if 109 * properly tuned for specific network traffic. Increasing this value adds 110 * extra latency to frame reception and can end up decreasing the throughput 111 * of TCP traffic. If the system is reporting dropped receives, this value 112 * may be set too high, causing the driver to run out of available receive 113 * descriptors. 114 * 115 * CAUTION: When setting EM_RDTR to a value other than 0, adapters 116 * may hang (stop transmitting) under certain network conditions. 117 * If this occurs a WATCHDOG message is logged in the system 118 * event log. In addition, the controller is automatically reset, 119 * restoring the network connection. To eliminate the potential 120 * for the hang ensure that EM_RDTR is set to 0. 121 */ 122#define EM_RDTR 0 123 124/* 125 * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) 126 * Valid Range: 0-65535 (0=off) 127 * Default Value: 64 128 * This value, in units of 1.024 microseconds, limits the delay in which a 129 * receive interrupt is generated. Useful only if EM_RDTR is non-zero, 130 * this value ensures that an interrupt is generated after the initial 131 * packet is received within the set amount of time. Proper tuning, 132 * along with EM_RDTR, may improve traffic throughput in specific network 133 * conditions. 134 */ 135#define EM_RADV 64 136 137/* 138 * This parameter controls the max duration of transmit watchdog. 139 */ 140#define EM_WATCHDOG (10 * hz) 141 142/* 143 * This parameter controls when the driver calls the routine to reclaim 144 * transmit descriptors. 145 */ 146#define EM_TX_CLEANUP_THRESHOLD (adapter->num_tx_desc / 8) 147#define EM_TX_OP_THRESHOLD (adapter->num_tx_desc / 32) 148 149/* 150 * This parameter controls whether or not autonegotation is enabled. 151 * 0 - Disable autonegotiation 152 * 1 - Enable autonegotiation 153 */ 154#define DO_AUTO_NEG 1 155 156/* 157 * This parameter control whether or not the driver will wait for 158 * autonegotiation to complete. 159 * 1 - Wait for autonegotiation to complete 160 * 0 - Don't wait for autonegotiation to complete 161 */ 162#define WAIT_FOR_AUTO_NEG_DEFAULT 0 163 164/* Tunables -- End */ 165 166#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ 167 ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ 168 ADVERTISE_1000_FULL) 169 170#define AUTO_ALL_MODES 0 171 172/* PHY master/slave setting */ 173#define EM_MASTER_SLAVE e1000_ms_hw_default 174 175/* 176 * Micellaneous constants 177 */ 178#define EM_VENDOR_ID 0x8086 179#define EM_FLASH 0x0014 180 181#define EM_JUMBO_PBA 0x00000028 182#define EM_DEFAULT_PBA 0x00000030 183#define EM_SMARTSPEED_DOWNSHIFT 3 184#define EM_SMARTSPEED_MAX 15 185#define EM_MAX_LOOP 10 186 187#define MAX_NUM_MULTICAST_ADDRESSES 128 188#define PCI_ANY_ID (~0U) 189#define ETHER_ALIGN 2 190#define EM_FC_PAUSE_TIME 0x0680 191#define EM_EEPROM_APME 0x400; 192#define EM_82544_APME 0x0004; 193 194/* Code compatilbility between 6 and 7 */ 195#ifndef ETHER_BPF_MTAP 196#define ETHER_BPF_MTAP BPF_MTAP 197#endif 198 199/* 200 * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be 201 * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will 202 * also optimize cache line size effect. H/W supports up to cache line size 128. 203 */ 204#define EM_DBA_ALIGN 128 205 206#define SPEED_MODE_BIT (1<<21) /* On PCI-E MACs only */ 207 208/* PCI Config defines */ 209#define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK) 210#define EM_BAR_TYPE_MASK 0x00000001 211#define EM_BAR_TYPE_MMEM 0x00000000 212#define EM_BAR_TYPE_IO 0x00000001 213#define EM_BAR_TYPE_FLASH 0x0014 214#define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK) 215#define EM_BAR_MEM_TYPE_MASK 0x00000006 216#define EM_BAR_MEM_TYPE_32BIT 0x00000000 217#define EM_BAR_MEM_TYPE_64BIT 0x00000004 218#define EM_MSIX_BAR 3 /* On 82575 */ 219 220#if __FreeBSD_version < 900000 221#define SYSCTL_ADD_UQUAD SYSCTL_ADD_QUAD 222#endif 223 224/* Defines for printing debug information */ 225#define DEBUG_INIT 0 226#define DEBUG_IOCTL 0 227#define DEBUG_HW 0 228 229#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") 230#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) 231#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) 232#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") 233#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) 234#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) 235#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") 236#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) 237#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) 238 239#define EM_MAX_SCATTER 40 240#define EM_VFTA_SIZE 128 241#define EM_MSIX_MASK 0x01F00000 /* For 82574 use */ 242#define ETH_ZLEN 60 243#define ETH_ADDR_LEN 6 244#define CSUM_OFFLOAD 7 /* Offload bits in mbuf flag */ 245 246/* 247 * 82574 has a nonstandard address for EIAC 248 * and since its only used in MSIX, and in 249 * the em driver only 82574 uses MSIX we can 250 * solve it just using this define. 251 */ 252#define EM_EIAC 0x000DC 253 254/* Used in for 82547 10Mb Half workaround */ 255#define EM_PBA_BYTES_SHIFT 0xA 256#define EM_TX_HEAD_ADDR_SHIFT 7 257#define EM_PBA_TX_MASK 0xFFFF0000 258#define EM_FIFO_HDR 0x10 259#define EM_82547_PKT_THRESH 0x3e0 260 261/* Precision Time Sync (IEEE 1588) defines */ 262#define ETHERTYPE_IEEE1588 0x88F7 263#define PICOSECS_PER_TICK 20833 264#define TSYNC_PORT 319 /* UDP port for the protocol */ 265 266#ifdef NIC_PARAVIRT 267#define E1000_PARA_SUBDEV 0x1101 /* special id */ 268#define E1000_CSBAL 0x02830 /* csb phys. addr. low */ 269#define E1000_CSBAH 0x02834 /* csb phys. addr. hi */ 270#include <net/paravirt.h> 271#endif /* NIC_PARAVIRT */ 272 273/* 274 * Bus dma allocation structure used by 275 * e1000_dma_malloc and e1000_dma_free. 276 */ 277struct em_dma_alloc { 278 bus_addr_t dma_paddr; 279 caddr_t dma_vaddr; 280 bus_dma_tag_t dma_tag; 281 bus_dmamap_t dma_map; 282 bus_dma_segment_t dma_seg; 283 int dma_nseg; 284}; 285 286struct adapter; 287 288struct em_int_delay_info { 289 struct adapter *adapter; /* Back-pointer to the adapter struct */ 290 int offset; /* Register offset to read/write */ 291 int value; /* Current value in usecs */ 292}; 293 294/* Our adapter structure */ 295struct adapter { 296 if_t ifp; 297 struct e1000_hw hw; 298 299 /* FreeBSD operating-system-specific structures. */ 300 struct e1000_osdep osdep; 301 struct device *dev; 302 struct cdev *led_dev; 303 304 struct resource *memory; 305 struct resource *flash; 306 struct resource *msix; 307 308 struct resource *ioport; 309 int io_rid; 310 311 /* 82574 may use 3 int vectors */ 312 struct resource *res[3]; 313 void *tag[3]; 314 int rid[3]; 315 316 struct ifmedia media; 317 struct callout timer; 318 struct callout tx_fifo_timer; 319 bool watchdog_check; 320 int watchdog_time; 321 int msi; 322 int if_flags; 323 int max_frame_size; 324 int min_frame_size; 325 struct mtx core_mtx; 326 struct mtx tx_mtx; 327 struct mtx rx_mtx; 328 int em_insert_vlan_header; 329 330 /* Task for FAST handling */ 331 struct task link_task; 332 struct task rxtx_task; 333 struct task rx_task; 334 struct task tx_task; 335 struct taskqueue *tq; /* private task queue */ 336 337 eventhandler_tag vlan_attach; 338 eventhandler_tag vlan_detach; 339 u32 num_vlans; 340 341 /* Management and WOL features */ 342 u32 wol; 343 bool has_manage; 344 bool has_amt; 345 346 /* Multicast array memory */ 347 u8 *mta; 348 349 /* 350 ** Shadow VFTA table, this is needed because 351 ** the real vlan filter table gets cleared during 352 ** a soft reset and the driver needs to be able 353 ** to repopulate it. 354 */ 355 u32 shadow_vfta[EM_VFTA_SIZE]; 356 357 /* Info about the interface */ 358 uint8_t link_active; 359 uint16_t link_speed; 360 uint16_t link_duplex; 361 uint32_t smartspeed; 362 uint32_t fc_setting; 363 364 struct em_int_delay_info tx_int_delay; 365 struct em_int_delay_info tx_abs_int_delay; 366 struct em_int_delay_info rx_int_delay; 367 struct em_int_delay_info rx_abs_int_delay; 368 struct em_int_delay_info tx_itr; 369 370 /* 371 * Transmit definitions 372 * 373 * We have an array of num_tx_desc descriptors (handled 374 * by the controller) paired with an array of tx_buffers 375 * (at tx_buffer_area). 376 * The index of the next available descriptor is next_avail_tx_desc. 377 * The number of remaining tx_desc is num_tx_desc_avail. 378 */ 379 struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ 380 struct e1000_tx_desc *tx_desc_base; 381 uint32_t next_avail_tx_desc; 382 uint32_t next_tx_to_clean; 383 volatile uint16_t num_tx_desc_avail; 384 uint16_t num_tx_desc; 385 uint16_t last_hw_offload; 386 uint32_t txd_cmd; 387 struct em_buffer *tx_buffer_area; 388 bus_dma_tag_t txtag; /* dma tag for tx */ 389 uint32_t tx_tso; /* last tx was tso */ 390 391 /* 392 * Receive definitions 393 * 394 * we have an array of num_rx_desc rx_desc (handled by the 395 * controller), and paired with an array of rx_buffers 396 * (at rx_buffer_area). 397 * The next pair to check on receive is at offset next_rx_desc_to_check 398 */ 399 struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ 400 struct e1000_rx_desc *rx_desc_base; 401 uint32_t next_rx_desc_to_check; 402 uint32_t rx_buffer_len; 403 uint16_t num_rx_desc; 404 int rx_process_limit; 405 struct em_buffer *rx_buffer_area; 406 bus_dma_tag_t rxtag; 407 bus_dmamap_t rx_sparemap; 408 409 /* 410 * First/last mbuf pointers, for 411 * collecting multisegment RX packets. 412 */ 413 struct mbuf *fmp; 414 struct mbuf *lmp; 415 416 /* Misc stats maintained by the driver */ 417 unsigned long dropped_pkts; 418 unsigned long link_irq; 419 unsigned long mbuf_cluster_failed; 420 unsigned long mbuf_defrag_failed; 421 unsigned long no_tx_desc_avail1; 422 unsigned long no_tx_desc_avail2; 423 unsigned long no_tx_dma_setup; 424 unsigned long no_tx_map_avail; 425 unsigned long watchdog_events; 426 unsigned long rx_irq; 427 unsigned long rx_overruns; 428 unsigned long tx_irq; 429 430 /* 82547 workaround */ 431 uint32_t tx_fifo_size; 432 uint32_t tx_fifo_head; 433 uint32_t tx_fifo_head_addr; 434 uint64_t tx_fifo_reset_cnt; 435 uint64_t tx_fifo_wrk_cnt; 436 uint32_t tx_head_addr; 437 438 /* For 82544 PCIX Workaround */ 439 boolean_t pcix_82544; 440 boolean_t in_detach; 441 442#ifdef NIC_SEND_COMBINING 443 /* 0 = idle; 1xxxx int-pending; 3xxxx int + d pending + tdt */ 444#define MIT_PENDING_INT 0x10000 /* pending interrupt */ 445#define MIT_PENDING_TDT 0x30000 /* both intr and tdt write are pending */ 446 uint32_t shadow_tdt; 447 uint32_t sc_enable; 448#endif /* NIC_SEND_COMBINING */ 449#ifdef BATCH_DISPATCH 450 uint32_t batch_enable; 451#endif /* BATCH_DISPATCH */ 452 453#ifdef NIC_PARAVIRT 454 struct em_dma_alloc csb_mem; /* phys address */ 455 struct paravirt_csb *csb; /* virtual addr */ 456 uint32_t rx_retries; /* optimize rx loop */ 457 uint32_t tdt_csb_count;// XXX stat 458 uint32_t tdt_reg_count;// XXX stat 459 uint32_t tdt_int_count;// XXX stat 460 uint32_t guest_need_kick_count;// XXX stat 461#endif /* NIC_PARAVIRT */ 462 463 struct e1000_hw_stats stats; 464}; 465 466/* ****************************************************************************** 467 * vendor_info_array 468 * 469 * This array contains the list of Subvendor/Subdevice IDs on which the driver 470 * should load. 471 * 472 * ******************************************************************************/ 473typedef struct _em_vendor_info_t { 474 unsigned int vendor_id; 475 unsigned int device_id; 476 unsigned int subvendor_id; 477 unsigned int subdevice_id; 478 unsigned int index; 479} em_vendor_info_t; 480 481struct em_buffer { 482 int next_eop; /* Index of the desc to watch */ 483 struct mbuf *m_head; 484 bus_dmamap_t map; /* bus_dma map for packet */ 485}; 486 487/* For 82544 PCIX Workaround */ 488typedef struct _ADDRESS_LENGTH_PAIR 489{ 490 uint64_t address; 491 uint32_t length; 492} ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR; 493 494typedef struct _DESCRIPTOR_PAIR 495{ 496 ADDRESS_LENGTH_PAIR descriptor[4]; 497 uint32_t elements; 498} DESC_ARRAY, *PDESC_ARRAY; 499 500#define EM_CORE_LOCK_INIT(_sc, _name) \ 501 mtx_init(&(_sc)->core_mtx, _name, "EM Core Lock", MTX_DEF) 502#define EM_TX_LOCK_INIT(_sc, _name) \ 503 mtx_init(&(_sc)->tx_mtx, _name, "EM TX Lock", MTX_DEF) 504#define EM_RX_LOCK_INIT(_sc, _name) \ 505 mtx_init(&(_sc)->rx_mtx, _name, "EM RX Lock", MTX_DEF) 506#define EM_CORE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->core_mtx) 507#define EM_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx) 508#define EM_RX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rx_mtx) 509#define EM_CORE_LOCK(_sc) mtx_lock(&(_sc)->core_mtx) 510#define EM_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx) 511#define EM_TX_TRYLOCK(_sc) mtx_trylock(&(_sc)->tx_mtx) 512#define EM_RX_LOCK(_sc) mtx_lock(&(_sc)->rx_mtx) 513#define EM_CORE_UNLOCK(_sc) mtx_unlock(&(_sc)->core_mtx) 514#define EM_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx) 515#define EM_RX_UNLOCK(_sc) mtx_unlock(&(_sc)->rx_mtx) 516#define EM_CORE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->core_mtx, MA_OWNED) 517#define EM_TX_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tx_mtx, MA_OWNED) 518 519#endif /* _LEM_H_DEFINED_ */ 520