if_bce.c revision 163337
1/*- 2 * Copyright (c) 2006 Broadcom Corporation 3 * David Christensen <davidch@broadcom.com>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of Broadcom Corporation nor the name of its contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written consent. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS' 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 28 * THE POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31#include <sys/cdefs.h> 32__FBSDID("$FreeBSD: head/sys/dev/bce/if_bce.c 163337 2006-10-14 03:58:59Z scottl $"); 33 34/* 35 * The following controllers are supported by this driver: 36 * BCM5706C A2, A3 37 * BCM5708C B1 38 * 39 * The following controllers are not supported by this driver: 40 * (These are not "Production" versions of the controller.) 41 * 42 * BCM5706C A0, A1 43 * BCM5706S A0, A1, A2, A3 44 * BCM5708C A0, B0 45 * BCM5708S A0, B0, B1 46 */ 47 48#include "opt_bce.h" 49 50#include <dev/bce/if_bcereg.h> 51#include <dev/bce/if_bcefw.h> 52 53/****************************************************************************/ 54/* BCE Driver Version */ 55/****************************************************************************/ 56char bce_driver_version[] = "v0.9.6"; 57 58 59/****************************************************************************/ 60/* BCE Debug Options */ 61/****************************************************************************/ 62#ifdef BCE_DEBUG 63 u32 bce_debug = BCE_WARN; 64 65 /* 0 = Never */ 66 /* 1 = 1 in 2,147,483,648 */ 67 /* 256 = 1 in 8,388,608 */ 68 /* 2048 = 1 in 1,048,576 */ 69 /* 65536 = 1 in 32,768 */ 70 /* 1048576 = 1 in 2,048 */ 71 /* 268435456 = 1 in 8 */ 72 /* 536870912 = 1 in 4 */ 73 /* 1073741824 = 1 in 2 */ 74 75 /* Controls how often the l2_fhdr frame error check will fail. */ 76 int bce_debug_l2fhdr_status_check = 0; 77 78 /* Controls how often the unexpected attention check will fail. */ 79 int bce_debug_unexpected_attention = 0; 80 81 /* Controls how often to simulate an mbuf allocation failure. */ 82 int bce_debug_mbuf_allocation_failure = 0; 83 84 /* Controls how often to simulate a DMA mapping failure. */ 85 int bce_debug_dma_map_addr_failure = 0; 86 87 /* Controls how often to simulate a bootcode failure. */ 88 int bce_debug_bootcode_running_failure = 0; 89#endif 90 91 92/****************************************************************************/ 93/* PCI Device ID Table */ 94/* */ 95/* Used by bce_probe() to identify the devices supported by this driver. */ 96/****************************************************************************/ 97#define BCE_DEVDESC_MAX 64 98 99static struct bce_type bce_devs[] = { 100 /* BCM5706C Controllers and OEM boards. */ 101 { BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3101, 102 "HP NC370T Multifunction Gigabit Server Adapter" }, 103 { BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3106, 104 "HP NC370i Multifunction Gigabit Server Adapter" }, 105 { BRCM_VENDORID, BRCM_DEVICEID_BCM5706, PCI_ANY_ID, PCI_ANY_ID, 106 "Broadcom NetXtreme II BCM5706 1000Base-T" }, 107 108 /* BCM5706S controllers and OEM boards. */ 109 { BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, HP_VENDORID, 0x3102, 110 "HP NC370F Multifunction Gigabit Server Adapter" }, 111 { BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, PCI_ANY_ID, PCI_ANY_ID, 112 "Broadcom NetXtreme II BCM5706 1000Base-SX" }, 113 114 /* BCM5708C controllers and OEM boards. */ 115 { BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID, 116 "Broadcom NetXtreme II BCM5708 1000Base-T" }, 117 118 /* BCM5708S controllers and OEM boards. */ 119 { BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID, 120 "Broadcom NetXtreme II BCM5708 1000Base-T" }, 121 { 0, 0, 0, 0, NULL } 122}; 123 124 125/****************************************************************************/ 126/* Supported Flash NVRAM device data. */ 127/****************************************************************************/ 128static struct flash_spec flash_table[] = 129{ 130 /* Slow EEPROM */ 131 {0x00000000, 0x40830380, 0x009f0081, 0xa184a053, 0xaf000400, 132 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, 133 SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, 134 "EEPROM - slow"}, 135 /* Expansion entry 0001 */ 136 {0x08000002, 0x4b808201, 0x00050081, 0x03840253, 0xaf020406, 137 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 138 SAIFUN_FLASH_BYTE_ADDR_MASK, 0, 139 "Entry 0001"}, 140 /* Saifun SA25F010 (non-buffered flash) */ 141 /* strap, cfg1, & write1 need updates */ 142 {0x04000001, 0x47808201, 0x00050081, 0x03840253, 0xaf020406, 143 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 144 SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2, 145 "Non-buffered flash (128kB)"}, 146 /* Saifun SA25F020 (non-buffered flash) */ 147 /* strap, cfg1, & write1 need updates */ 148 {0x0c000003, 0x4f808201, 0x00050081, 0x03840253, 0xaf020406, 149 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 150 SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4, 151 "Non-buffered flash (256kB)"}, 152 /* Expansion entry 0100 */ 153 {0x11000000, 0x53808201, 0x00050081, 0x03840253, 0xaf020406, 154 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 155 SAIFUN_FLASH_BYTE_ADDR_MASK, 0, 156 "Entry 0100"}, 157 /* Entry 0101: ST M45PE10 (non-buffered flash, TetonII B0) */ 158 {0x19000002, 0x5b808201, 0x000500db, 0x03840253, 0xaf020406, 159 0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE, 160 ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*2, 161 "Entry 0101: ST M45PE10 (128kB non-bufferred)"}, 162 /* Entry 0110: ST M45PE20 (non-buffered flash)*/ 163 {0x15000001, 0x57808201, 0x000500db, 0x03840253, 0xaf020406, 164 0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE, 165 ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*4, 166 "Entry 0110: ST M45PE20 (256kB non-bufferred)"}, 167 /* Saifun SA25F005 (non-buffered flash) */ 168 /* strap, cfg1, & write1 need updates */ 169 {0x1d000003, 0x5f808201, 0x00050081, 0x03840253, 0xaf020406, 170 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 171 SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE, 172 "Non-buffered flash (64kB)"}, 173 /* Fast EEPROM */ 174 {0x22000000, 0x62808380, 0x009f0081, 0xa184a053, 0xaf000400, 175 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, 176 SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, 177 "EEPROM - fast"}, 178 /* Expansion entry 1001 */ 179 {0x2a000002, 0x6b808201, 0x00050081, 0x03840253, 0xaf020406, 180 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 181 SAIFUN_FLASH_BYTE_ADDR_MASK, 0, 182 "Entry 1001"}, 183 /* Expansion entry 1010 */ 184 {0x26000001, 0x67808201, 0x00050081, 0x03840253, 0xaf020406, 185 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 186 SAIFUN_FLASH_BYTE_ADDR_MASK, 0, 187 "Entry 1010"}, 188 /* ATMEL AT45DB011B (buffered flash) */ 189 {0x2e000003, 0x6e808273, 0x00570081, 0x68848353, 0xaf000400, 190 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, 191 BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE, 192 "Buffered flash (128kB)"}, 193 /* Expansion entry 1100 */ 194 {0x33000000, 0x73808201, 0x00050081, 0x03840253, 0xaf020406, 195 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 196 SAIFUN_FLASH_BYTE_ADDR_MASK, 0, 197 "Entry 1100"}, 198 /* Expansion entry 1101 */ 199 {0x3b000002, 0x7b808201, 0x00050081, 0x03840253, 0xaf020406, 200 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, 201 SAIFUN_FLASH_BYTE_ADDR_MASK, 0, 202 "Entry 1101"}, 203 /* Ateml Expansion entry 1110 */ 204 {0x37000001, 0x76808273, 0x00570081, 0x68848353, 0xaf000400, 205 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, 206 BUFFERED_FLASH_BYTE_ADDR_MASK, 0, 207 "Entry 1110 (Atmel)"}, 208 /* ATMEL AT45DB021B (buffered flash) */ 209 {0x3f000003, 0x7e808273, 0x00570081, 0x68848353, 0xaf000400, 210 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, 211 BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE*2, 212 "Buffered flash (256kB)"}, 213}; 214 215 216/****************************************************************************/ 217/* FreeBSD device entry points. */ 218/****************************************************************************/ 219static int bce_probe (device_t); 220static int bce_attach (device_t); 221static int bce_detach (device_t); 222static void bce_shutdown (device_t); 223 224 225/****************************************************************************/ 226/* BCE Debug Data Structure Dump Routines */ 227/****************************************************************************/ 228#ifdef BCE_DEBUG 229static void bce_dump_mbuf (struct bce_softc *, struct mbuf *); 230static void bce_dump_tx_mbuf_chain (struct bce_softc *, int, int); 231static void bce_dump_rx_mbuf_chain (struct bce_softc *, int, int); 232static void bce_dump_txbd (struct bce_softc *, int, struct tx_bd *); 233static void bce_dump_rxbd (struct bce_softc *, int, struct rx_bd *); 234static void bce_dump_l2fhdr (struct bce_softc *, int, struct l2_fhdr *); 235static void bce_dump_tx_chain (struct bce_softc *, int, int); 236static void bce_dump_rx_chain (struct bce_softc *, int, int); 237static void bce_dump_status_block (struct bce_softc *); 238static void bce_dump_stats_block (struct bce_softc *); 239static void bce_dump_driver_state (struct bce_softc *); 240static void bce_dump_hw_state (struct bce_softc *); 241static void bce_breakpoint (struct bce_softc *); 242#endif 243 244 245/****************************************************************************/ 246/* BCE Register/Memory Access Routines */ 247/****************************************************************************/ 248static u32 bce_reg_rd_ind (struct bce_softc *, u32); 249static void bce_reg_wr_ind (struct bce_softc *, u32, u32); 250static void bce_ctx_wr (struct bce_softc *, u32, u32, u32); 251static int bce_miibus_read_reg (device_t, int, int); 252static int bce_miibus_write_reg (device_t, int, int, int); 253static void bce_miibus_statchg (device_t); 254 255 256/****************************************************************************/ 257/* BCE NVRAM Access Routines */ 258/****************************************************************************/ 259static int bce_acquire_nvram_lock (struct bce_softc *); 260static int bce_release_nvram_lock (struct bce_softc *); 261static void bce_enable_nvram_access (struct bce_softc *); 262static void bce_disable_nvram_access(struct bce_softc *); 263static int bce_nvram_read_dword (struct bce_softc *, u32, u8 *, u32); 264static int bce_init_nvram (struct bce_softc *); 265static int bce_nvram_read (struct bce_softc *, u32, u8 *, int); 266static int bce_nvram_test (struct bce_softc *); 267#ifdef BCE_NVRAM_WRITE_SUPPORT 268static int bce_enable_nvram_write (struct bce_softc *); 269static void bce_disable_nvram_write (struct bce_softc *); 270static int bce_nvram_erase_page (struct bce_softc *, u32); 271static int bce_nvram_write_dword (struct bce_softc *, u32, u8 *, u32); 272static int bce_nvram_write (struct bce_softc *, u32, u8 *, int); 273#endif 274 275/****************************************************************************/ 276/* */ 277/****************************************************************************/ 278static void bce_dma_map_addr (void *, bus_dma_segment_t *, int, int); 279static void bce_dma_map_tx_desc (void *, bus_dma_segment_t *, int, bus_size_t, int); 280static int bce_dma_alloc (device_t); 281static void bce_dma_free (struct bce_softc *); 282static void bce_release_resources (struct bce_softc *); 283 284/****************************************************************************/ 285/* BCE Firmware Synchronization and Load */ 286/****************************************************************************/ 287static int bce_fw_sync (struct bce_softc *, u32); 288static void bce_load_rv2p_fw (struct bce_softc *, u32 *, u32, u32); 289static void bce_load_cpu_fw (struct bce_softc *, struct cpu_reg *, struct fw_info *); 290static void bce_init_cpus (struct bce_softc *); 291 292static void bce_stop (struct bce_softc *); 293static int bce_reset (struct bce_softc *, u32); 294static int bce_chipinit (struct bce_softc *); 295static int bce_blockinit (struct bce_softc *); 296static int bce_get_buf (struct bce_softc *, struct mbuf *, u16 *, u16 *, u32 *); 297 298static int bce_init_tx_chain (struct bce_softc *); 299static int bce_init_rx_chain (struct bce_softc *); 300static void bce_free_rx_chain (struct bce_softc *); 301static void bce_free_tx_chain (struct bce_softc *); 302 303static int bce_tx_encap (struct bce_softc *, struct mbuf *, u16 *, u16 *, u32 *); 304static void bce_start_locked (struct ifnet *); 305static void bce_start (struct ifnet *); 306static int bce_ioctl (struct ifnet *, u_long, caddr_t); 307static void bce_watchdog (struct ifnet *); 308static int bce_ifmedia_upd (struct ifnet *); 309static void bce_ifmedia_sts (struct ifnet *, struct ifmediareq *); 310static void bce_init_locked (struct bce_softc *); 311static void bce_init (void *); 312static void bce_mgmt_init_locked(struct bce_softc *sc); 313 314static void bce_init_context (struct bce_softc *); 315static void bce_get_mac_addr (struct bce_softc *); 316static void bce_set_mac_addr (struct bce_softc *); 317static void bce_phy_intr (struct bce_softc *); 318static void bce_rx_intr (struct bce_softc *); 319static void bce_tx_intr (struct bce_softc *); 320static void bce_disable_intr (struct bce_softc *); 321static void bce_enable_intr (struct bce_softc *); 322 323#ifdef DEVICE_POLLING 324static void bce_poll_locked (struct ifnet *, enum poll_cmd, int); 325static void bce_poll (struct ifnet *, enum poll_cmd, int); 326#endif 327static void bce_intr (void *); 328static void bce_set_rx_mode (struct bce_softc *); 329static void bce_stats_update (struct bce_softc *); 330static void bce_tick_locked (struct bce_softc *); 331static void bce_tick (void *); 332static void bce_add_sysctls (struct bce_softc *); 333 334 335/****************************************************************************/ 336/* FreeBSD device dispatch table. */ 337/****************************************************************************/ 338static device_method_t bce_methods[] = { 339 /* Device interface */ 340 DEVMETHOD(device_probe, bce_probe), 341 DEVMETHOD(device_attach, bce_attach), 342 DEVMETHOD(device_detach, bce_detach), 343 DEVMETHOD(device_shutdown, bce_shutdown), 344 345 /* bus interface */ 346 DEVMETHOD(bus_print_child, bus_generic_print_child), 347 DEVMETHOD(bus_driver_added, bus_generic_driver_added), 348 349 /* MII interface */ 350 DEVMETHOD(miibus_readreg, bce_miibus_read_reg), 351 DEVMETHOD(miibus_writereg, bce_miibus_write_reg), 352 DEVMETHOD(miibus_statchg, bce_miibus_statchg), 353 354 { 0, 0 } 355}; 356 357static driver_t bce_driver = { 358 "bce", 359 bce_methods, 360 sizeof(struct bce_softc) 361}; 362 363static devclass_t bce_devclass; 364 365MODULE_DEPEND(bce, pci, 1, 1, 1); 366MODULE_DEPEND(bce, ether, 1, 1, 1); 367MODULE_DEPEND(bce, miibus, 1, 1, 1); 368 369DRIVER_MODULE(bce, pci, bce_driver, bce_devclass, 0, 0); 370DRIVER_MODULE(miibus, bce, miibus_driver, miibus_devclass, 0, 0); 371 372 373/****************************************************************************/ 374/* Device probe function. */ 375/* */ 376/* Compares the device to the driver's list of supported devices and */ 377/* reports back to the OS whether this is the right driver for the device. */ 378/* */ 379/* Returns: */ 380/* BUS_PROBE_DEFAULT on success, positive value on failure. */ 381/****************************************************************************/ 382static int 383bce_probe(device_t dev) 384{ 385 struct bce_type *t; 386 struct bce_softc *sc; 387 char *descbuf; 388 u16 vid = 0, did = 0, svid = 0, sdid = 0; 389 390 t = bce_devs; 391 392 sc = device_get_softc(dev); 393 bzero(sc, sizeof(struct bce_softc)); 394 sc->bce_unit = device_get_unit(dev); 395 sc->bce_dev = dev; 396 397 /* Get the data for the device to be probed. */ 398 vid = pci_get_vendor(dev); 399 did = pci_get_device(dev); 400 svid = pci_get_subvendor(dev); 401 sdid = pci_get_subdevice(dev); 402 403 DBPRINT(sc, BCE_VERBOSE_LOAD, 404 "%s(); VID = 0x%04X, DID = 0x%04X, SVID = 0x%04X, " 405 "SDID = 0x%04X\n", __FUNCTION__, vid, did, svid, sdid); 406 407 /* Look through the list of known devices for a match. */ 408 while(t->bce_name != NULL) { 409 410 if ((vid == t->bce_vid) && (did == t->bce_did) && 411 ((svid == t->bce_svid) || (t->bce_svid == PCI_ANY_ID)) && 412 ((sdid == t->bce_sdid) || (t->bce_sdid == PCI_ANY_ID))) { 413 414 descbuf = malloc(BCE_DEVDESC_MAX, M_TEMP, M_NOWAIT); 415 416 if (descbuf == NULL) 417 return(ENOMEM); 418 419 /* Print out the device identity. */ 420 snprintf(descbuf, BCE_DEVDESC_MAX, "%s (%c%d), %s", 421 t->bce_name, 422 (((pci_read_config(dev, PCIR_REVID, 4) & 0xf0) >> 4) + 'A'), 423 (pci_read_config(dev, PCIR_REVID, 4) & 0xf), 424 bce_driver_version); 425 426 device_set_desc_copy(dev, descbuf); 427 free(descbuf, M_TEMP); 428 return(BUS_PROBE_DEFAULT); 429 } 430 t++; 431 } 432 433 DBPRINT(sc, BCE_VERBOSE_LOAD, "%s(%d): No IOCTL match found!\n", 434 __FILE__, __LINE__); 435 436 return(ENXIO); 437} 438 439 440/****************************************************************************/ 441/* Device attach function. */ 442/* */ 443/* Allocates device resources, performs secondary chip identification, */ 444/* resets and initializes the hardware, and initializes driver instance */ 445/* variables. */ 446/* */ 447/* Returns: */ 448/* 0 on success, positive value on failure. */ 449/****************************************************************************/ 450static int 451bce_attach(device_t dev) 452{ 453 struct bce_softc *sc; 454 struct ifnet *ifp; 455 u32 val; 456 int mbuf, rid, rc = 0; 457 458 sc = device_get_softc(dev); 459 sc->bce_dev = dev; 460 461 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 462 463 mbuf = device_get_unit(dev); 464 sc->bce_unit = mbuf; 465 466 pci_enable_busmaster(dev); 467 468 /* Allocate PCI memory resources. */ 469 rid = PCIR_BAR(0); 470 sc->bce_res = bus_alloc_resource_any( 471 dev, /* dev */ 472 SYS_RES_MEMORY, /* type */ 473 &rid, /* rid */ 474 RF_ACTIVE | PCI_RF_DENSE); /* flags */ 475 476 if (sc->bce_res == NULL) { 477 BCE_PRINTF(sc, "%s(%d): PCI memory allocation failed\n", 478 __FILE__, __LINE__); 479 rc = ENXIO; 480 goto bce_attach_fail; 481 } 482 483 /* Get various resource handles. */ 484 sc->bce_btag = rman_get_bustag(sc->bce_res); 485 sc->bce_bhandle = rman_get_bushandle(sc->bce_res); 486 sc->bce_vhandle = (vm_offset_t) rman_get_virtual(sc->bce_res); 487 488 /* Allocate PCI IRQ resources. */ 489 rid = 0; 490 sc->bce_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 491 RF_SHAREABLE | RF_ACTIVE); 492 493 if (sc->bce_irq == NULL) { 494 BCE_PRINTF(sc, "%s(%d): PCI map interrupt failed\n", 495 __FILE__, __LINE__); 496 rc = ENXIO; 497 goto bce_attach_fail; 498 } 499 500 /* Initialize mutex for the current device instance. */ 501 BCE_LOCK_INIT(sc, device_get_nameunit(dev)); 502 503 /* 504 * Configure byte swap and enable indirect register access. 505 * Rely on CPU to do target byte swapping on big endian systems. 506 * Access to registers outside of PCI configurtion space are not 507 * valid until this is done. 508 */ 509 pci_write_config(dev, BCE_PCICFG_MISC_CONFIG, 510 BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | 511 BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP, 4); 512 513 /* Save ASIC revsion info. */ 514 sc->bce_chipid = REG_RD(sc, BCE_MISC_ID); 515 516 /* Weed out any non-production controller revisions. */ 517 switch(BCE_CHIP_ID(sc)) { 518 case BCE_CHIP_ID_5706_A0: 519 case BCE_CHIP_ID_5706_A1: 520 case BCE_CHIP_ID_5708_A0: 521 case BCE_CHIP_ID_5708_B0: 522 BCE_PRINTF(sc, "%s(%d): Unsupported controller revision (%c%d)!\n", 523 __FILE__, __LINE__, 524 (((pci_read_config(dev, PCIR_REVID, 4) & 0xf0) >> 4) + 'A'), 525 (pci_read_config(dev, PCIR_REVID, 4) & 0xf)); 526 rc = ENODEV; 527 goto bce_attach_fail; 528 } 529 530 if (BCE_CHIP_BOND_ID(sc) & BCE_CHIP_BOND_ID_SERDES_BIT) { 531 BCE_PRINTF(sc, "%s(%d): SerDes controllers are not supported!\n", 532 __FILE__, __LINE__); 533 rc = ENODEV; 534 goto bce_attach_fail; 535 } 536 537 /* 538 * The embedded PCIe to PCI-X bridge (EPB) 539 * in the 5708 cannot address memory above 540 * 40 bits (E7_5708CB1_23043 & E6_5708SB1_23043). 541 */ 542 if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708) 543 sc->max_bus_addr = BCE_BUS_SPACE_MAXADDR; 544 else 545 sc->max_bus_addr = BUS_SPACE_MAXADDR; 546 547 /* 548 * Find the base address for shared memory access. 549 * Newer versions of bootcode use a signature and offset 550 * while older versions use a fixed address. 551 */ 552 val = REG_RD_IND(sc, BCE_SHM_HDR_SIGNATURE); 553 if ((val & BCE_SHM_HDR_SIGNATURE_SIG_MASK) == BCE_SHM_HDR_SIGNATURE_SIG) 554 sc->bce_shmem_base = REG_RD_IND(sc, BCE_SHM_HDR_ADDR_0); 555 else 556 sc->bce_shmem_base = HOST_VIEW_SHMEM_BASE; 557 558 DBPRINT(sc, BCE_INFO, "bce_shmem_base = 0x%08X\n", sc->bce_shmem_base); 559 560 /* Set initial device and PHY flags */ 561 sc->bce_flags = 0; 562 sc->bce_phy_flags = 0; 563 564 /* Get PCI bus information (speed and type). */ 565 val = REG_RD(sc, BCE_PCICFG_MISC_STATUS); 566 if (val & BCE_PCICFG_MISC_STATUS_PCIX_DET) { 567 u32 clkreg; 568 569 sc->bce_flags |= BCE_PCIX_FLAG; 570 571 clkreg = REG_RD(sc, BCE_PCICFG_PCI_CLOCK_CONTROL_BITS); 572 573 clkreg &= BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET; 574 switch (clkreg) { 575 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ: 576 sc->bus_speed_mhz = 133; 577 break; 578 579 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ: 580 sc->bus_speed_mhz = 100; 581 break; 582 583 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ: 584 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ: 585 sc->bus_speed_mhz = 66; 586 break; 587 588 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ: 589 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ: 590 sc->bus_speed_mhz = 50; 591 break; 592 593 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW: 594 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ: 595 case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ: 596 sc->bus_speed_mhz = 33; 597 break; 598 } 599 } else { 600 if (val & BCE_PCICFG_MISC_STATUS_M66EN) 601 sc->bus_speed_mhz = 66; 602 else 603 sc->bus_speed_mhz = 33; 604 } 605 606 if (val & BCE_PCICFG_MISC_STATUS_32BIT_DET) 607 sc->bce_flags |= BCE_PCI_32BIT_FLAG; 608 609 BCE_PRINTF(sc, "ASIC ID 0x%08X; Revision (%c%d); PCI%s %s %dMHz\n", 610 sc->bce_chipid, 611 ((BCE_CHIP_ID(sc) & 0xf000) >> 12) + 'A', 612 ((BCE_CHIP_ID(sc) & 0x0ff0) >> 4), 613 ((sc->bce_flags & BCE_PCIX_FLAG) ? "-X" : ""), 614 ((sc->bce_flags & BCE_PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), 615 sc->bus_speed_mhz); 616 617 /* Reset the controller. */ 618 if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) { 619 rc = ENXIO; 620 goto bce_attach_fail; 621 } 622 623 /* Initialize the controller. */ 624 if (bce_chipinit(sc)) { 625 BCE_PRINTF(sc, "%s(%d): Controller initialization failed!\n", 626 __FILE__, __LINE__); 627 rc = ENXIO; 628 goto bce_attach_fail; 629 } 630 631 /* Perform NVRAM test. */ 632 if (bce_nvram_test(sc)) { 633 BCE_PRINTF(sc, "%s(%d): NVRAM test failed!\n", 634 __FILE__, __LINE__); 635 rc = ENXIO; 636 goto bce_attach_fail; 637 } 638 639 /* Fetch the permanent Ethernet MAC address. */ 640 bce_get_mac_addr(sc); 641 642 /* 643 * Trip points control how many BDs 644 * should be ready before generating an 645 * interrupt while ticks control how long 646 * a BD can sit in the chain before 647 * generating an interrupt. Set the default 648 * values for the RX and TX rings. 649 */ 650 651#ifdef BCE_DRBUG 652 /* Force more frequent interrupts. */ 653 sc->bce_tx_quick_cons_trip_int = 1; 654 sc->bce_tx_quick_cons_trip = 1; 655 sc->bce_tx_ticks_int = 0; 656 sc->bce_tx_ticks = 0; 657 658 sc->bce_rx_quick_cons_trip_int = 1; 659 sc->bce_rx_quick_cons_trip = 1; 660 sc->bce_rx_ticks_int = 0; 661 sc->bce_rx_ticks = 0; 662#else 663 sc->bce_tx_quick_cons_trip_int = 20; 664 sc->bce_tx_quick_cons_trip = 20; 665 sc->bce_tx_ticks_int = 80; 666 sc->bce_tx_ticks = 80; 667 668 sc->bce_rx_quick_cons_trip_int = 6; 669 sc->bce_rx_quick_cons_trip = 6; 670 sc->bce_rx_ticks_int = 18; 671 sc->bce_rx_ticks = 18; 672#endif 673 674 /* Update statistics once every second. */ 675 sc->bce_stats_ticks = 1000000 & 0xffff00; 676 677 /* 678 * The copper based NetXtreme II controllers 679 * use an integrated PHY at address 1 while 680 * the SerDes controllers use a PHY at 681 * address 2. 682 */ 683 sc->bce_phy_addr = 1; 684 685 if (BCE_CHIP_BOND_ID(sc) & BCE_CHIP_BOND_ID_SERDES_BIT) { 686 sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG; 687 sc->bce_flags |= BCE_NO_WOL_FLAG; 688 if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708) { 689 sc->bce_phy_addr = 2; 690 val = REG_RD_IND(sc, sc->bce_shmem_base + 691 BCE_SHARED_HW_CFG_CONFIG); 692 if (val & BCE_SHARED_HW_CFG_PHY_2_5G) 693 sc->bce_phy_flags |= BCE_PHY_2_5G_CAPABLE_FLAG; 694 } 695 } 696 697 /* Allocate DMA memory resources. */ 698 if (bce_dma_alloc(dev)) { 699 BCE_PRINTF(sc, "%s(%d): DMA resource allocation failed!\n", 700 __FILE__, __LINE__); 701 rc = ENXIO; 702 goto bce_attach_fail; 703 } 704 705 /* Allocate an ifnet structure. */ 706 ifp = sc->bce_ifp = if_alloc(IFT_ETHER); 707 if (ifp == NULL) { 708 BCE_PRINTF(sc, "%s(%d): Interface allocation failed!\n", 709 __FILE__, __LINE__); 710 rc = ENXIO; 711 goto bce_attach_fail; 712 } 713 714 /* Initialize the ifnet interface. */ 715 ifp->if_softc = sc; 716 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 717 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 718 ifp->if_ioctl = bce_ioctl; 719 ifp->if_start = bce_start; 720 ifp->if_timer = 0; 721 ifp->if_watchdog = bce_watchdog; 722 ifp->if_init = bce_init; 723 ifp->if_mtu = ETHERMTU; 724 ifp->if_hwassist = BCE_IF_HWASSIST; 725 ifp->if_capabilities = BCE_IF_CAPABILITIES; 726 ifp->if_capenable = ifp->if_capabilities; 727 728 /* Assume a standard 1500 byte MTU size for mbuf allocations. */ 729 sc->mbuf_alloc_size = MCLBYTES; 730#ifdef DEVICE_POLLING 731 ifp->if_capabilities |= IFCAP_POLLING; 732#endif 733 734 ifp->if_snd.ifq_drv_maxlen = USABLE_TX_BD; 735 if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG) 736 ifp->if_baudrate = IF_Gbps(2.5); 737 else 738 ifp->if_baudrate = IF_Gbps(1); 739 740 IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen); 741 IFQ_SET_READY(&ifp->if_snd); 742 743 if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) { 744 BCE_PRINTF(sc, "%s(%d): SerDes is not supported by this driver!\n", 745 __FILE__, __LINE__); 746 rc = ENODEV; 747 goto bce_attach_fail; 748 } else { 749 /* Look for our PHY. */ 750 if (mii_phy_probe(dev, &sc->bce_miibus, bce_ifmedia_upd, 751 bce_ifmedia_sts)) { 752 BCE_PRINTF(sc, "%s(%d): PHY probe failed!\n", 753 __FILE__, __LINE__); 754 rc = ENXIO; 755 goto bce_attach_fail; 756 } 757 } 758 759 /* Attach to the Ethernet interface list. */ 760 ether_ifattach(ifp, sc->eaddr); 761 762#if __FreeBSD_version < 500000 763 callout_init(&sc->bce_stat_ch); 764#else 765 callout_init(&sc->bce_stat_ch, CALLOUT_MPSAFE); 766#endif 767 768 /* Hookup IRQ last. */ 769 rc = bus_setup_intr(dev, sc->bce_irq, INTR_TYPE_NET | INTR_MPSAFE, 770 bce_intr, sc, &sc->bce_intrhand); 771 772 if (rc) { 773 BCE_PRINTF(sc, "%s(%d): Failed to setup IRQ!\n", 774 __FILE__, __LINE__); 775 bce_detach(dev); 776 goto bce_attach_exit; 777 } 778 779 /* Print some important debugging info. */ 780 DBRUN(BCE_INFO, bce_dump_driver_state(sc)); 781 782 /* Add the supported sysctls to the kernel. */ 783 bce_add_sysctls(sc); 784 785 /* Get the firmware running so IPMI still works */ 786 BCE_LOCK(sc); 787 bce_mgmt_init_locked(sc); 788 BCE_UNLOCK(sc); 789 790 goto bce_attach_exit; 791 792bce_attach_fail: 793 bce_release_resources(sc); 794 795bce_attach_exit: 796 797 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 798 799 return(rc); 800} 801 802 803/****************************************************************************/ 804/* Device detach function. */ 805/* */ 806/* Stops the controller, resets the controller, and releases resources. */ 807/* */ 808/* Returns: */ 809/* 0 on success, positive value on failure. */ 810/****************************************************************************/ 811static int 812bce_detach(device_t dev) 813{ 814 struct bce_softc *sc; 815 struct ifnet *ifp; 816 817 sc = device_get_softc(dev); 818 819 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 820 821 ifp = sc->bce_ifp; 822 823#ifdef DEVICE_POLLING 824 if (ifp->if_capenable & IFCAP_POLLING) 825 ether_poll_deregister(ifp); 826#endif 827 828 /* Stop and reset the controller. */ 829 BCE_LOCK(sc); 830 bce_stop(sc); 831 bce_reset(sc, BCE_DRV_MSG_CODE_RESET); 832 BCE_UNLOCK(sc); 833 834 ether_ifdetach(ifp); 835 836 /* If we have a child device on the MII bus remove it too. */ 837 if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) { 838 ifmedia_removeall(&sc->bce_ifmedia); 839 } else { 840 bus_generic_detach(dev); 841 device_delete_child(dev, sc->bce_miibus); 842 } 843 844 /* Release all remaining resources. */ 845 bce_release_resources(sc); 846 847 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 848 849 return(0); 850} 851 852 853/****************************************************************************/ 854/* Device shutdown function. */ 855/* */ 856/* Stops and resets the controller. */ 857/* */ 858/* Returns: */ 859/* Nothing */ 860/****************************************************************************/ 861static void 862bce_shutdown(device_t dev) 863{ 864 struct bce_softc *sc = device_get_softc(dev); 865 866 BCE_LOCK(sc); 867 bce_stop(sc); 868 bce_reset(sc, BCE_DRV_MSG_CODE_RESET); 869 BCE_UNLOCK(sc); 870} 871 872 873/****************************************************************************/ 874/* Indirect register read. */ 875/* */ 876/* Reads NetXtreme II registers using an index/data register pair in PCI */ 877/* configuration space. Using this mechanism avoids issues with posted */ 878/* reads but is much slower than memory-mapped I/O. */ 879/* */ 880/* Returns: */ 881/* The value of the register. */ 882/****************************************************************************/ 883static u32 884bce_reg_rd_ind(struct bce_softc *sc, u32 offset) 885{ 886 device_t dev; 887 dev = sc->bce_dev; 888 889 pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4); 890#ifdef BCE_DEBUG 891 { 892 u32 val; 893 val = pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4); 894 DBPRINT(sc, BCE_EXCESSIVE, "%s(); offset = 0x%08X, val = 0x%08X\n", 895 __FUNCTION__, offset, val); 896 return val; 897 } 898#else 899 return pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4); 900#endif 901} 902 903 904/****************************************************************************/ 905/* Indirect register write. */ 906/* */ 907/* Writes NetXtreme II registers using an index/data register pair in PCI */ 908/* configuration space. Using this mechanism avoids issues with posted */ 909/* writes but is muchh slower than memory-mapped I/O. */ 910/* */ 911/* Returns: */ 912/* Nothing. */ 913/****************************************************************************/ 914static void 915bce_reg_wr_ind(struct bce_softc *sc, u32 offset, u32 val) 916{ 917 device_t dev; 918 dev = sc->bce_dev; 919 920 DBPRINT(sc, BCE_EXCESSIVE, "%s(); offset = 0x%08X, val = 0x%08X\n", 921 __FUNCTION__, offset, val); 922 923 pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4); 924 pci_write_config(dev, BCE_PCICFG_REG_WINDOW, val, 4); 925} 926 927 928/****************************************************************************/ 929/* Context memory write. */ 930/* */ 931/* The NetXtreme II controller uses context memory to track connection */ 932/* information for L2 and higher network protocols. */ 933/* */ 934/* Returns: */ 935/* Nothing. */ 936/****************************************************************************/ 937static void 938bce_ctx_wr(struct bce_softc *sc, u32 cid_addr, u32 offset, u32 val) 939{ 940 941 DBPRINT(sc, BCE_EXCESSIVE, "%s(); cid_addr = 0x%08X, offset = 0x%08X, " 942 "val = 0x%08X\n", __FUNCTION__, cid_addr, offset, val); 943 944 offset += cid_addr; 945 REG_WR(sc, BCE_CTX_DATA_ADR, offset); 946 REG_WR(sc, BCE_CTX_DATA, val); 947} 948 949 950/****************************************************************************/ 951/* PHY register read. */ 952/* */ 953/* Implements register reads on the MII bus. */ 954/* */ 955/* Returns: */ 956/* The value of the register. */ 957/****************************************************************************/ 958static int 959bce_miibus_read_reg(device_t dev, int phy, int reg) 960{ 961 struct bce_softc *sc; 962 u32 val; 963 int i; 964 965 sc = device_get_softc(dev); 966 967 /* Make sure we are accessing the correct PHY address. */ 968 if (phy != sc->bce_phy_addr) { 969 DBPRINT(sc, BCE_VERBOSE, "Invalid PHY address %d for PHY read!\n", phy); 970 return(0); 971 } 972 973 if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) { 974 val = REG_RD(sc, BCE_EMAC_MDIO_MODE); 975 val &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL; 976 977 REG_WR(sc, BCE_EMAC_MDIO_MODE, val); 978 REG_RD(sc, BCE_EMAC_MDIO_MODE); 979 980 DELAY(40); 981 } 982 983 val = BCE_MIPHY(phy) | BCE_MIREG(reg) | 984 BCE_EMAC_MDIO_COMM_COMMAND_READ | BCE_EMAC_MDIO_COMM_DISEXT | 985 BCE_EMAC_MDIO_COMM_START_BUSY; 986 REG_WR(sc, BCE_EMAC_MDIO_COMM, val); 987 988 for (i = 0; i < BCE_PHY_TIMEOUT; i++) { 989 DELAY(10); 990 991 val = REG_RD(sc, BCE_EMAC_MDIO_COMM); 992 if (!(val & BCE_EMAC_MDIO_COMM_START_BUSY)) { 993 DELAY(5); 994 995 val = REG_RD(sc, BCE_EMAC_MDIO_COMM); 996 val &= BCE_EMAC_MDIO_COMM_DATA; 997 998 break; 999 } 1000 } 1001 1002 if (val & BCE_EMAC_MDIO_COMM_START_BUSY) { 1003 BCE_PRINTF(sc, "%s(%d): Error: PHY read timeout! phy = %d, reg = 0x%04X\n", 1004 __FILE__, __LINE__, phy, reg); 1005 val = 0x0; 1006 } else { 1007 val = REG_RD(sc, BCE_EMAC_MDIO_COMM); 1008 } 1009 1010 DBPRINT(sc, BCE_EXCESSIVE, "%s(): phy = %d, reg = 0x%04X, val = 0x%04X\n", 1011 __FUNCTION__, phy, (u16) reg & 0xffff, (u16) val & 0xffff); 1012 1013 if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) { 1014 val = REG_RD(sc, BCE_EMAC_MDIO_MODE); 1015 val |= BCE_EMAC_MDIO_MODE_AUTO_POLL; 1016 1017 REG_WR(sc, BCE_EMAC_MDIO_MODE, val); 1018 REG_RD(sc, BCE_EMAC_MDIO_MODE); 1019 1020 DELAY(40); 1021 } 1022 1023 return (val & 0xffff); 1024 1025} 1026 1027 1028/****************************************************************************/ 1029/* PHY register write. */ 1030/* */ 1031/* Implements register writes on the MII bus. */ 1032/* */ 1033/* Returns: */ 1034/* The value of the register. */ 1035/****************************************************************************/ 1036static int 1037bce_miibus_write_reg(device_t dev, int phy, int reg, int val) 1038{ 1039 struct bce_softc *sc; 1040 u32 val1; 1041 int i; 1042 1043 sc = device_get_softc(dev); 1044 1045 /* Make sure we are accessing the correct PHY address. */ 1046 if (phy != sc->bce_phy_addr) { 1047 DBPRINT(sc, BCE_WARN, "Invalid PHY address %d for PHY write!\n", phy); 1048 return(0); 1049 } 1050 1051 DBPRINT(sc, BCE_EXCESSIVE, "%s(): phy = %d, reg = 0x%04X, val = 0x%04X\n", 1052 __FUNCTION__, phy, (u16) reg & 0xffff, (u16) val & 0xffff); 1053 1054 if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) { 1055 val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE); 1056 val1 &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL; 1057 1058 REG_WR(sc, BCE_EMAC_MDIO_MODE, val1); 1059 REG_RD(sc, BCE_EMAC_MDIO_MODE); 1060 1061 DELAY(40); 1062 } 1063 1064 val1 = BCE_MIPHY(phy) | BCE_MIREG(reg) | val | 1065 BCE_EMAC_MDIO_COMM_COMMAND_WRITE | 1066 BCE_EMAC_MDIO_COMM_START_BUSY | BCE_EMAC_MDIO_COMM_DISEXT; 1067 REG_WR(sc, BCE_EMAC_MDIO_COMM, val1); 1068 1069 for (i = 0; i < BCE_PHY_TIMEOUT; i++) { 1070 DELAY(10); 1071 1072 val1 = REG_RD(sc, BCE_EMAC_MDIO_COMM); 1073 if (!(val1 & BCE_EMAC_MDIO_COMM_START_BUSY)) { 1074 DELAY(5); 1075 break; 1076 } 1077 } 1078 1079 if (val1 & BCE_EMAC_MDIO_COMM_START_BUSY) 1080 BCE_PRINTF(sc, "%s(%d): PHY write timeout!\n", 1081 __FILE__, __LINE__); 1082 1083 if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) { 1084 val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE); 1085 val1 |= BCE_EMAC_MDIO_MODE_AUTO_POLL; 1086 1087 REG_WR(sc, BCE_EMAC_MDIO_MODE, val1); 1088 REG_RD(sc, BCE_EMAC_MDIO_MODE); 1089 1090 DELAY(40); 1091 } 1092 1093 return 0; 1094} 1095 1096 1097/****************************************************************************/ 1098/* MII bus status change. */ 1099/* */ 1100/* Called by the MII bus driver when the PHY establishes link to set the */ 1101/* MAC interface registers. */ 1102/* */ 1103/* Returns: */ 1104/* Nothing. */ 1105/****************************************************************************/ 1106static void 1107bce_miibus_statchg(device_t dev) 1108{ 1109 struct bce_softc *sc; 1110 struct mii_data *mii; 1111 1112 sc = device_get_softc(dev); 1113 1114 mii = device_get_softc(sc->bce_miibus); 1115 1116 BCE_CLRBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_PORT); 1117 1118 /* Set MII or GMII inerface based on the speed negotiated by the PHY. */ 1119 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) { 1120 DBPRINT(sc, BCE_INFO, "Setting GMII interface.\n"); 1121 BCE_SETBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_PORT_GMII); 1122 } else { 1123 DBPRINT(sc, BCE_INFO, "Setting MII interface.\n"); 1124 BCE_SETBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_PORT_MII); 1125 } 1126 1127 /* Set half or full duplex based on the duplicity negotiated by the PHY. */ 1128 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { 1129 DBPRINT(sc, BCE_INFO, "Setting Full-Duplex interface.\n"); 1130 BCE_CLRBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_HALF_DUPLEX); 1131 } else { 1132 DBPRINT(sc, BCE_INFO, "Setting Half-Duplex interface.\n"); 1133 BCE_SETBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_HALF_DUPLEX); 1134 } 1135} 1136 1137 1138/****************************************************************************/ 1139/* Acquire NVRAM lock. */ 1140/* */ 1141/* Before the NVRAM can be accessed the caller must acquire an NVRAM lock. */ 1142/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */ 1143/* for use by the driver. */ 1144/* */ 1145/* Returns: */ 1146/* 0 on success, positive value on failure. */ 1147/****************************************************************************/ 1148static int 1149bce_acquire_nvram_lock(struct bce_softc *sc) 1150{ 1151 u32 val; 1152 int j; 1153 1154 DBPRINT(sc, BCE_VERBOSE, "Acquiring NVRAM lock.\n"); 1155 1156 /* Request access to the flash interface. */ 1157 REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_SET2); 1158 for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { 1159 val = REG_RD(sc, BCE_NVM_SW_ARB); 1160 if (val & BCE_NVM_SW_ARB_ARB_ARB2) 1161 break; 1162 1163 DELAY(5); 1164 } 1165 1166 if (j >= NVRAM_TIMEOUT_COUNT) { 1167 DBPRINT(sc, BCE_WARN, "Timeout acquiring NVRAM lock!\n"); 1168 return EBUSY; 1169 } 1170 1171 return 0; 1172} 1173 1174 1175/****************************************************************************/ 1176/* Release NVRAM lock. */ 1177/* */ 1178/* When the caller is finished accessing NVRAM the lock must be released. */ 1179/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */ 1180/* for use by the driver. */ 1181/* */ 1182/* Returns: */ 1183/* 0 on success, positive value on failure. */ 1184/****************************************************************************/ 1185static int 1186bce_release_nvram_lock(struct bce_softc *sc) 1187{ 1188 int j; 1189 u32 val; 1190 1191 DBPRINT(sc, BCE_VERBOSE, "Releasing NVRAM lock.\n"); 1192 1193 /* 1194 * Relinquish nvram interface. 1195 */ 1196 REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_CLR2); 1197 1198 for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { 1199 val = REG_RD(sc, BCE_NVM_SW_ARB); 1200 if (!(val & BCE_NVM_SW_ARB_ARB_ARB2)) 1201 break; 1202 1203 DELAY(5); 1204 } 1205 1206 if (j >= NVRAM_TIMEOUT_COUNT) { 1207 DBPRINT(sc, BCE_WARN, "Timeout reeasing NVRAM lock!\n"); 1208 return EBUSY; 1209 } 1210 1211 return 0; 1212} 1213 1214 1215#ifdef BCE_NVRAM_WRITE_SUPPORT 1216/****************************************************************************/ 1217/* Enable NVRAM write access. */ 1218/* */ 1219/* Before writing to NVRAM the caller must enable NVRAM writes. */ 1220/* */ 1221/* Returns: */ 1222/* 0 on success, positive value on failure. */ 1223/****************************************************************************/ 1224static int 1225bce_enable_nvram_write(struct bce_softc *sc) 1226{ 1227 u32 val; 1228 1229 DBPRINT(sc, BCE_VERBOSE, "Enabling NVRAM write.\n"); 1230 1231 val = REG_RD(sc, BCE_MISC_CFG); 1232 REG_WR(sc, BCE_MISC_CFG, val | BCE_MISC_CFG_NVM_WR_EN_PCI); 1233 1234 if (!sc->bce_flash_info->buffered) { 1235 int j; 1236 1237 REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE); 1238 REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_WREN | BCE_NVM_COMMAND_DOIT); 1239 1240 for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { 1241 DELAY(5); 1242 1243 val = REG_RD(sc, BCE_NVM_COMMAND); 1244 if (val & BCE_NVM_COMMAND_DONE) 1245 break; 1246 } 1247 1248 if (j >= NVRAM_TIMEOUT_COUNT) { 1249 DBPRINT(sc, BCE_WARN, "Timeout writing NVRAM!\n"); 1250 return EBUSY; 1251 } 1252 } 1253 return 0; 1254} 1255 1256 1257/****************************************************************************/ 1258/* Disable NVRAM write access. */ 1259/* */ 1260/* When the caller is finished writing to NVRAM write access must be */ 1261/* disabled. */ 1262/* */ 1263/* Returns: */ 1264/* Nothing. */ 1265/****************************************************************************/ 1266static void 1267bce_disable_nvram_write(struct bce_softc *sc) 1268{ 1269 u32 val; 1270 1271 DBPRINT(sc, BCE_VERBOSE, "Disabling NVRAM write.\n"); 1272 1273 val = REG_RD(sc, BCE_MISC_CFG); 1274 REG_WR(sc, BCE_MISC_CFG, val & ~BCE_MISC_CFG_NVM_WR_EN); 1275} 1276#endif 1277 1278 1279/****************************************************************************/ 1280/* Enable NVRAM access. */ 1281/* */ 1282/* Before accessing NVRAM for read or write operations the caller must */ 1283/* enabled NVRAM access. */ 1284/* */ 1285/* Returns: */ 1286/* Nothing. */ 1287/****************************************************************************/ 1288static void 1289bce_enable_nvram_access(struct bce_softc *sc) 1290{ 1291 u32 val; 1292 1293 DBPRINT(sc, BCE_VERBOSE, "Enabling NVRAM access.\n"); 1294 1295 val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE); 1296 /* Enable both bits, even on read. */ 1297 REG_WR(sc, BCE_NVM_ACCESS_ENABLE, 1298 val | BCE_NVM_ACCESS_ENABLE_EN | BCE_NVM_ACCESS_ENABLE_WR_EN); 1299} 1300 1301 1302/****************************************************************************/ 1303/* Disable NVRAM access. */ 1304/* */ 1305/* When the caller is finished accessing NVRAM access must be disabled. */ 1306/* */ 1307/* Returns: */ 1308/* Nothing. */ 1309/****************************************************************************/ 1310static void 1311bce_disable_nvram_access(struct bce_softc *sc) 1312{ 1313 u32 val; 1314 1315 DBPRINT(sc, BCE_VERBOSE, "Disabling NVRAM access.\n"); 1316 1317 val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE); 1318 1319 /* Disable both bits, even after read. */ 1320 REG_WR(sc, BCE_NVM_ACCESS_ENABLE, 1321 val & ~(BCE_NVM_ACCESS_ENABLE_EN | 1322 BCE_NVM_ACCESS_ENABLE_WR_EN)); 1323} 1324 1325 1326#ifdef BCE_NVRAM_WRITE_SUPPORT 1327/****************************************************************************/ 1328/* Erase NVRAM page before writing. */ 1329/* */ 1330/* Non-buffered flash parts require that a page be erased before it is */ 1331/* written. */ 1332/* */ 1333/* Returns: */ 1334/* 0 on success, positive value on failure. */ 1335/****************************************************************************/ 1336static int 1337bce_nvram_erase_page(struct bce_softc *sc, u32 offset) 1338{ 1339 u32 cmd; 1340 int j; 1341 1342 /* Buffered flash doesn't require an erase. */ 1343 if (sc->bce_flash_info->buffered) 1344 return 0; 1345 1346 DBPRINT(sc, BCE_VERBOSE, "Erasing NVRAM page.\n"); 1347 1348 /* Build an erase command. */ 1349 cmd = BCE_NVM_COMMAND_ERASE | BCE_NVM_COMMAND_WR | 1350 BCE_NVM_COMMAND_DOIT; 1351 1352 /* 1353 * Clear the DONE bit separately, set the NVRAM adress to erase, 1354 * and issue the erase command. 1355 */ 1356 REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE); 1357 REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE); 1358 REG_WR(sc, BCE_NVM_COMMAND, cmd); 1359 1360 /* Wait for completion. */ 1361 for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { 1362 u32 val; 1363 1364 DELAY(5); 1365 1366 val = REG_RD(sc, BCE_NVM_COMMAND); 1367 if (val & BCE_NVM_COMMAND_DONE) 1368 break; 1369 } 1370 1371 if (j >= NVRAM_TIMEOUT_COUNT) { 1372 DBPRINT(sc, BCE_WARN, "Timeout erasing NVRAM.\n"); 1373 return EBUSY; 1374 } 1375 1376 return 0; 1377} 1378#endif /* BCE_NVRAM_WRITE_SUPPORT */ 1379 1380 1381/****************************************************************************/ 1382/* Read a dword (32 bits) from NVRAM. */ 1383/* */ 1384/* Read a 32 bit word from NVRAM. The caller is assumed to have already */ 1385/* obtained the NVRAM lock and enabled the controller for NVRAM access. */ 1386/* */ 1387/* Returns: */ 1388/* 0 on success and the 32 bit value read, positive value on failure. */ 1389/****************************************************************************/ 1390static int 1391bce_nvram_read_dword(struct bce_softc *sc, u32 offset, u8 *ret_val, 1392 u32 cmd_flags) 1393{ 1394 u32 cmd; 1395 int i, rc = 0; 1396 1397 /* Build the command word. */ 1398 cmd = BCE_NVM_COMMAND_DOIT | cmd_flags; 1399 1400 /* Calculate the offset for buffered flash. */ 1401 if (sc->bce_flash_info->buffered) { 1402 offset = ((offset / sc->bce_flash_info->page_size) << 1403 sc->bce_flash_info->page_bits) + 1404 (offset % sc->bce_flash_info->page_size); 1405 } 1406 1407 /* 1408 * Clear the DONE bit separately, set the address to read, 1409 * and issue the read. 1410 */ 1411 REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE); 1412 REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE); 1413 REG_WR(sc, BCE_NVM_COMMAND, cmd); 1414 1415 /* Wait for completion. */ 1416 for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) { 1417 u32 val; 1418 1419 DELAY(5); 1420 1421 val = REG_RD(sc, BCE_NVM_COMMAND); 1422 if (val & BCE_NVM_COMMAND_DONE) { 1423 val = REG_RD(sc, BCE_NVM_READ); 1424 1425 val = bce_be32toh(val); 1426 memcpy(ret_val, &val, 4); 1427 break; 1428 } 1429 } 1430 1431 /* Check for errors. */ 1432 if (i >= NVRAM_TIMEOUT_COUNT) { 1433 BCE_PRINTF(sc, "%s(%d): Timeout error reading NVRAM at offset 0x%08X!\n", 1434 __FILE__, __LINE__, offset); 1435 rc = EBUSY; 1436 } 1437 1438 return(rc); 1439} 1440 1441 1442#ifdef BCE_NVRAM_WRITE_SUPPORT 1443/****************************************************************************/ 1444/* Write a dword (32 bits) to NVRAM. */ 1445/* */ 1446/* Write a 32 bit word to NVRAM. The caller is assumed to have already */ 1447/* obtained the NVRAM lock, enabled the controller for NVRAM access, and */ 1448/* enabled NVRAM write access. */ 1449/* */ 1450/* Returns: */ 1451/* 0 on success, positive value on failure. */ 1452/****************************************************************************/ 1453static int 1454bce_nvram_write_dword(struct bce_softc *sc, u32 offset, u8 *val, 1455 u32 cmd_flags) 1456{ 1457 u32 cmd, val32; 1458 int j; 1459 1460 /* Build the command word. */ 1461 cmd = BCE_NVM_COMMAND_DOIT | BCE_NVM_COMMAND_WR | cmd_flags; 1462 1463 /* Calculate the offset for buffered flash. */ 1464 if (sc->bce_flash_info->buffered) { 1465 offset = ((offset / sc->bce_flash_info->page_size) << 1466 sc->bce_flash_info->page_bits) + 1467 (offset % sc->bce_flash_info->page_size); 1468 } 1469 1470 /* 1471 * Clear the DONE bit separately, convert NVRAM data to big-endian, 1472 * set the NVRAM address to write, and issue the write command 1473 */ 1474 REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE); 1475 memcpy(&val32, val, 4); 1476 val32 = htobe32(val32); 1477 REG_WR(sc, BCE_NVM_WRITE, val32); 1478 REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE); 1479 REG_WR(sc, BCE_NVM_COMMAND, cmd); 1480 1481 /* Wait for completion. */ 1482 for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { 1483 DELAY(5); 1484 1485 if (REG_RD(sc, BCE_NVM_COMMAND) & BCE_NVM_COMMAND_DONE) 1486 break; 1487 } 1488 if (j >= NVRAM_TIMEOUT_COUNT) { 1489 BCE_PRINTF(sc, "%s(%d): Timeout error writing NVRAM at offset 0x%08X\n", 1490 __FILE__, __LINE__, offset); 1491 return EBUSY; 1492 } 1493 1494 return 0; 1495} 1496#endif /* BCE_NVRAM_WRITE_SUPPORT */ 1497 1498 1499/****************************************************************************/ 1500/* Initialize NVRAM access. */ 1501/* */ 1502/* Identify the NVRAM device in use and prepare the NVRAM interface to */ 1503/* access that device. */ 1504/* */ 1505/* Returns: */ 1506/* 0 on success, positive value on failure. */ 1507/****************************************************************************/ 1508static int 1509bce_init_nvram(struct bce_softc *sc) 1510{ 1511 u32 val; 1512 int j, entry_count, rc; 1513 struct flash_spec *flash; 1514 1515 DBPRINT(sc,BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 1516 1517 /* Determine the selected interface. */ 1518 val = REG_RD(sc, BCE_NVM_CFG1); 1519 1520 entry_count = sizeof(flash_table) / sizeof(struct flash_spec); 1521 1522 rc = 0; 1523 1524 /* 1525 * Flash reconfiguration is required to support additional 1526 * NVRAM devices not directly supported in hardware. 1527 * Check if the flash interface was reconfigured 1528 * by the bootcode. 1529 */ 1530 1531 if (val & 0x40000000) { 1532 /* Flash interface reconfigured by bootcode. */ 1533 1534 DBPRINT(sc,BCE_INFO_LOAD, 1535 "bce_init_nvram(): Flash WAS reconfigured.\n"); 1536 1537 for (j = 0, flash = &flash_table[0]; j < entry_count; 1538 j++, flash++) { 1539 if ((val & FLASH_BACKUP_STRAP_MASK) == 1540 (flash->config1 & FLASH_BACKUP_STRAP_MASK)) { 1541 sc->bce_flash_info = flash; 1542 break; 1543 } 1544 } 1545 } else { 1546 /* Flash interface not yet reconfigured. */ 1547 u32 mask; 1548 1549 DBPRINT(sc,BCE_INFO_LOAD, 1550 "bce_init_nvram(): Flash was NOT reconfigured.\n"); 1551 1552 if (val & (1 << 23)) 1553 mask = FLASH_BACKUP_STRAP_MASK; 1554 else 1555 mask = FLASH_STRAP_MASK; 1556 1557 /* Look for the matching NVRAM device configuration data. */ 1558 for (j = 0, flash = &flash_table[0]; j < entry_count; j++, flash++) { 1559 1560 /* Check if the device matches any of the known devices. */ 1561 if ((val & mask) == (flash->strapping & mask)) { 1562 /* Found a device match. */ 1563 sc->bce_flash_info = flash; 1564 1565 /* Request access to the flash interface. */ 1566 if ((rc = bce_acquire_nvram_lock(sc)) != 0) 1567 return rc; 1568 1569 /* Reconfigure the flash interface. */ 1570 bce_enable_nvram_access(sc); 1571 REG_WR(sc, BCE_NVM_CFG1, flash->config1); 1572 REG_WR(sc, BCE_NVM_CFG2, flash->config2); 1573 REG_WR(sc, BCE_NVM_CFG3, flash->config3); 1574 REG_WR(sc, BCE_NVM_WRITE1, flash->write1); 1575 bce_disable_nvram_access(sc); 1576 bce_release_nvram_lock(sc); 1577 1578 break; 1579 } 1580 } 1581 } 1582 1583 /* Check if a matching device was found. */ 1584 if (j == entry_count) { 1585 sc->bce_flash_info = NULL; 1586 BCE_PRINTF(sc, "%s(%d): Unknown Flash NVRAM found!\n", 1587 __FILE__, __LINE__); 1588 rc = ENODEV; 1589 } 1590 1591 /* Write the flash config data to the shared memory interface. */ 1592 val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_SHARED_HW_CFG_CONFIG2); 1593 val &= BCE_SHARED_HW_CFG2_NVM_SIZE_MASK; 1594 if (val) 1595 sc->bce_flash_size = val; 1596 else 1597 sc->bce_flash_size = sc->bce_flash_info->total_size; 1598 1599 DBPRINT(sc, BCE_INFO_LOAD, "bce_init_nvram() flash->total_size = 0x%08X\n", 1600 sc->bce_flash_info->total_size); 1601 1602 DBPRINT(sc,BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 1603 1604 return rc; 1605} 1606 1607 1608/****************************************************************************/ 1609/* Read an arbitrary range of data from NVRAM. */ 1610/* */ 1611/* Prepares the NVRAM interface for access and reads the requested data */ 1612/* into the supplied buffer. */ 1613/* */ 1614/* Returns: */ 1615/* 0 on success and the data read, positive value on failure. */ 1616/****************************************************************************/ 1617static int 1618bce_nvram_read(struct bce_softc *sc, u32 offset, u8 *ret_buf, 1619 int buf_size) 1620{ 1621 int rc = 0; 1622 u32 cmd_flags, offset32, len32, extra; 1623 1624 if (buf_size == 0) 1625 return 0; 1626 1627 /* Request access to the flash interface. */ 1628 if ((rc = bce_acquire_nvram_lock(sc)) != 0) 1629 return rc; 1630 1631 /* Enable access to flash interface */ 1632 bce_enable_nvram_access(sc); 1633 1634 len32 = buf_size; 1635 offset32 = offset; 1636 extra = 0; 1637 1638 cmd_flags = 0; 1639 1640 if (offset32 & 3) { 1641 u8 buf[4]; 1642 u32 pre_len; 1643 1644 offset32 &= ~3; 1645 pre_len = 4 - (offset & 3); 1646 1647 if (pre_len >= len32) { 1648 pre_len = len32; 1649 cmd_flags = BCE_NVM_COMMAND_FIRST | BCE_NVM_COMMAND_LAST; 1650 } 1651 else { 1652 cmd_flags = BCE_NVM_COMMAND_FIRST; 1653 } 1654 1655 rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags); 1656 1657 if (rc) 1658 return rc; 1659 1660 memcpy(ret_buf, buf + (offset & 3), pre_len); 1661 1662 offset32 += 4; 1663 ret_buf += pre_len; 1664 len32 -= pre_len; 1665 } 1666 1667 if (len32 & 3) { 1668 extra = 4 - (len32 & 3); 1669 len32 = (len32 + 4) & ~3; 1670 } 1671 1672 if (len32 == 4) { 1673 u8 buf[4]; 1674 1675 if (cmd_flags) 1676 cmd_flags = BCE_NVM_COMMAND_LAST; 1677 else 1678 cmd_flags = BCE_NVM_COMMAND_FIRST | 1679 BCE_NVM_COMMAND_LAST; 1680 1681 rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags); 1682 1683 memcpy(ret_buf, buf, 4 - extra); 1684 } 1685 else if (len32 > 0) { 1686 u8 buf[4]; 1687 1688 /* Read the first word. */ 1689 if (cmd_flags) 1690 cmd_flags = 0; 1691 else 1692 cmd_flags = BCE_NVM_COMMAND_FIRST; 1693 1694 rc = bce_nvram_read_dword(sc, offset32, ret_buf, cmd_flags); 1695 1696 /* Advance to the next dword. */ 1697 offset32 += 4; 1698 ret_buf += 4; 1699 len32 -= 4; 1700 1701 while (len32 > 4 && rc == 0) { 1702 rc = bce_nvram_read_dword(sc, offset32, ret_buf, 0); 1703 1704 /* Advance to the next dword. */ 1705 offset32 += 4; 1706 ret_buf += 4; 1707 len32 -= 4; 1708 } 1709 1710 if (rc) 1711 return rc; 1712 1713 cmd_flags = BCE_NVM_COMMAND_LAST; 1714 rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags); 1715 1716 memcpy(ret_buf, buf, 4 - extra); 1717 } 1718 1719 /* Disable access to flash interface and release the lock. */ 1720 bce_disable_nvram_access(sc); 1721 bce_release_nvram_lock(sc); 1722 1723 return rc; 1724} 1725 1726 1727#ifdef BCE_NVRAM_WRITE_SUPPORT 1728/****************************************************************************/ 1729/* Write an arbitrary range of data from NVRAM. */ 1730/* */ 1731/* Prepares the NVRAM interface for write access and writes the requested */ 1732/* data from the supplied buffer. The caller is responsible for */ 1733/* calculating any appropriate CRCs. */ 1734/* */ 1735/* Returns: */ 1736/* 0 on success, positive value on failure. */ 1737/****************************************************************************/ 1738static int 1739bce_nvram_write(struct bce_softc *sc, u32 offset, u8 *data_buf, 1740 int buf_size) 1741{ 1742 u32 written, offset32, len32; 1743 u8 *buf, start[4], end[4]; 1744 int rc = 0; 1745 int align_start, align_end; 1746 1747 buf = data_buf; 1748 offset32 = offset; 1749 len32 = buf_size; 1750 align_start = align_end = 0; 1751 1752 if ((align_start = (offset32 & 3))) { 1753 offset32 &= ~3; 1754 len32 += align_start; 1755 if ((rc = bce_nvram_read(sc, offset32, start, 4))) 1756 return rc; 1757 } 1758 1759 if (len32 & 3) { 1760 if ((len32 > 4) || !align_start) { 1761 align_end = 4 - (len32 & 3); 1762 len32 += align_end; 1763 if ((rc = bce_nvram_read(sc, offset32 + len32 - 4, 1764 end, 4))) { 1765 return rc; 1766 } 1767 } 1768 } 1769 1770 if (align_start || align_end) { 1771 buf = malloc(len32, M_DEVBUF, M_NOWAIT); 1772 if (buf == 0) 1773 return ENOMEM; 1774 if (align_start) { 1775 memcpy(buf, start, 4); 1776 } 1777 if (align_end) { 1778 memcpy(buf + len32 - 4, end, 4); 1779 } 1780 memcpy(buf + align_start, data_buf, buf_size); 1781 } 1782 1783 written = 0; 1784 while ((written < len32) && (rc == 0)) { 1785 u32 page_start, page_end, data_start, data_end; 1786 u32 addr, cmd_flags; 1787 int i; 1788 u8 flash_buffer[264]; 1789 1790 /* Find the page_start addr */ 1791 page_start = offset32 + written; 1792 page_start -= (page_start % sc->bce_flash_info->page_size); 1793 /* Find the page_end addr */ 1794 page_end = page_start + sc->bce_flash_info->page_size; 1795 /* Find the data_start addr */ 1796 data_start = (written == 0) ? offset32 : page_start; 1797 /* Find the data_end addr */ 1798 data_end = (page_end > offset32 + len32) ? 1799 (offset32 + len32) : page_end; 1800 1801 /* Request access to the flash interface. */ 1802 if ((rc = bce_acquire_nvram_lock(sc)) != 0) 1803 goto nvram_write_end; 1804 1805 /* Enable access to flash interface */ 1806 bce_enable_nvram_access(sc); 1807 1808 cmd_flags = BCE_NVM_COMMAND_FIRST; 1809 if (sc->bce_flash_info->buffered == 0) { 1810 int j; 1811 1812 /* Read the whole page into the buffer 1813 * (non-buffer flash only) */ 1814 for (j = 0; j < sc->bce_flash_info->page_size; j += 4) { 1815 if (j == (sc->bce_flash_info->page_size - 4)) { 1816 cmd_flags |= BCE_NVM_COMMAND_LAST; 1817 } 1818 rc = bce_nvram_read_dword(sc, 1819 page_start + j, 1820 &flash_buffer[j], 1821 cmd_flags); 1822 1823 if (rc) 1824 goto nvram_write_end; 1825 1826 cmd_flags = 0; 1827 } 1828 } 1829 1830 /* Enable writes to flash interface (unlock write-protect) */ 1831 if ((rc = bce_enable_nvram_write(sc)) != 0) 1832 goto nvram_write_end; 1833 1834 /* Erase the page */ 1835 if ((rc = bce_nvram_erase_page(sc, page_start)) != 0) 1836 goto nvram_write_end; 1837 1838 /* Re-enable the write again for the actual write */ 1839 bce_enable_nvram_write(sc); 1840 1841 /* Loop to write back the buffer data from page_start to 1842 * data_start */ 1843 i = 0; 1844 if (sc->bce_flash_info->buffered == 0) { 1845 for (addr = page_start; addr < data_start; 1846 addr += 4, i += 4) { 1847 1848 rc = bce_nvram_write_dword(sc, addr, 1849 &flash_buffer[i], cmd_flags); 1850 1851 if (rc != 0) 1852 goto nvram_write_end; 1853 1854 cmd_flags = 0; 1855 } 1856 } 1857 1858 /* Loop to write the new data from data_start to data_end */ 1859 for (addr = data_start; addr < data_end; addr += 4, i++) { 1860 if ((addr == page_end - 4) || 1861 ((sc->bce_flash_info->buffered) && 1862 (addr == data_end - 4))) { 1863 1864 cmd_flags |= BCE_NVM_COMMAND_LAST; 1865 } 1866 rc = bce_nvram_write_dword(sc, addr, buf, 1867 cmd_flags); 1868 1869 if (rc != 0) 1870 goto nvram_write_end; 1871 1872 cmd_flags = 0; 1873 buf += 4; 1874 } 1875 1876 /* Loop to write back the buffer data from data_end 1877 * to page_end */ 1878 if (sc->bce_flash_info->buffered == 0) { 1879 for (addr = data_end; addr < page_end; 1880 addr += 4, i += 4) { 1881 1882 if (addr == page_end-4) { 1883 cmd_flags = BCE_NVM_COMMAND_LAST; 1884 } 1885 rc = bce_nvram_write_dword(sc, addr, 1886 &flash_buffer[i], cmd_flags); 1887 1888 if (rc != 0) 1889 goto nvram_write_end; 1890 1891 cmd_flags = 0; 1892 } 1893 } 1894 1895 /* Disable writes to flash interface (lock write-protect) */ 1896 bce_disable_nvram_write(sc); 1897 1898 /* Disable access to flash interface */ 1899 bce_disable_nvram_access(sc); 1900 bce_release_nvram_lock(sc); 1901 1902 /* Increment written */ 1903 written += data_end - data_start; 1904 } 1905 1906nvram_write_end: 1907 if (align_start || align_end) 1908 free(buf, M_DEVBUF); 1909 1910 return rc; 1911} 1912#endif /* BCE_NVRAM_WRITE_SUPPORT */ 1913 1914 1915/****************************************************************************/ 1916/* Verifies that NVRAM is accessible and contains valid data. */ 1917/* */ 1918/* Reads the configuration data from NVRAM and verifies that the CRC is */ 1919/* correct. */ 1920/* */ 1921/* Returns: */ 1922/* 0 on success, positive value on failure. */ 1923/****************************************************************************/ 1924static int 1925bce_nvram_test(struct bce_softc *sc) 1926{ 1927 u32 buf[BCE_NVRAM_SIZE / 4]; 1928 u8 *data = (u8 *) buf; 1929 int rc = 0; 1930 u32 magic, csum; 1931 1932 1933 /* 1934 * Check that the device NVRAM is valid by reading 1935 * the magic value at offset 0. 1936 */ 1937 if ((rc = bce_nvram_read(sc, 0, data, 4)) != 0) 1938 goto bce_nvram_test_done; 1939 1940 1941 magic = bce_be32toh(buf[0]); 1942 if (magic != BCE_NVRAM_MAGIC) { 1943 rc = ENODEV; 1944 BCE_PRINTF(sc, "%s(%d): Invalid NVRAM magic value! Expected: 0x%08X, " 1945 "Found: 0x%08X\n", 1946 __FILE__, __LINE__, BCE_NVRAM_MAGIC, magic); 1947 goto bce_nvram_test_done; 1948 } 1949 1950 /* 1951 * Verify that the device NVRAM includes valid 1952 * configuration data. 1953 */ 1954 if ((rc = bce_nvram_read(sc, 0x100, data, BCE_NVRAM_SIZE)) != 0) 1955 goto bce_nvram_test_done; 1956 1957 csum = ether_crc32_le(data, 0x100); 1958 if (csum != BCE_CRC32_RESIDUAL) { 1959 rc = ENODEV; 1960 BCE_PRINTF(sc, "%s(%d): Invalid Manufacturing Information NVRAM CRC! " 1961 "Expected: 0x%08X, Found: 0x%08X\n", 1962 __FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum); 1963 goto bce_nvram_test_done; 1964 } 1965 1966 csum = ether_crc32_le(data + 0x100, 0x100); 1967 if (csum != BCE_CRC32_RESIDUAL) { 1968 BCE_PRINTF(sc, "%s(%d): Invalid Feature Configuration Information " 1969 "NVRAM CRC! Expected: 0x%08X, Found: 08%08X\n", 1970 __FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum); 1971 rc = ENODEV; 1972 } 1973 1974bce_nvram_test_done: 1975 return rc; 1976} 1977 1978 1979/****************************************************************************/ 1980/* Free any DMA memory owned by the driver. */ 1981/* */ 1982/* Scans through each data structre that requires DMA memory and frees */ 1983/* the memory if allocated. */ 1984/* */ 1985/* Returns: */ 1986/* Nothing. */ 1987/****************************************************************************/ 1988static void 1989bce_dma_free(struct bce_softc *sc) 1990{ 1991 int i; 1992 1993 DBPRINT(sc,BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 1994 1995 /* Destroy the status block. */ 1996 if (sc->status_block != NULL) 1997 bus_dmamem_free( 1998 sc->status_tag, 1999 sc->status_block, 2000 sc->status_map); 2001 2002 if (sc->status_map != NULL) { 2003 bus_dmamap_unload( 2004 sc->status_tag, 2005 sc->status_map); 2006 bus_dmamap_destroy(sc->status_tag, 2007 sc->status_map); 2008 } 2009 2010 if (sc->status_tag != NULL) 2011 bus_dma_tag_destroy(sc->status_tag); 2012 2013 2014 /* Destroy the statistics block. */ 2015 if (sc->stats_block != NULL) 2016 bus_dmamem_free( 2017 sc->stats_tag, 2018 sc->stats_block, 2019 sc->stats_map); 2020 2021 if (sc->stats_map != NULL) { 2022 bus_dmamap_unload( 2023 sc->stats_tag, 2024 sc->stats_map); 2025 bus_dmamap_destroy(sc->stats_tag, 2026 sc->stats_map); 2027 } 2028 2029 if (sc->stats_tag != NULL) 2030 bus_dma_tag_destroy(sc->stats_tag); 2031 2032 2033 /* Free, unmap and destroy all TX buffer descriptor chain pages. */ 2034 for (i = 0; i < TX_PAGES; i++ ) { 2035 if (sc->tx_bd_chain[i] != NULL) 2036 bus_dmamem_free( 2037 sc->tx_bd_chain_tag, 2038 sc->tx_bd_chain[i], 2039 sc->tx_bd_chain_map[i]); 2040 2041 if (sc->tx_bd_chain_map[i] != NULL) { 2042 bus_dmamap_unload( 2043 sc->tx_bd_chain_tag, 2044 sc->tx_bd_chain_map[i]); 2045 bus_dmamap_destroy( 2046 sc->tx_bd_chain_tag, 2047 sc->tx_bd_chain_map[i]); 2048 } 2049 2050 } 2051 2052 /* Destroy the TX buffer descriptor tag. */ 2053 if (sc->tx_bd_chain_tag != NULL) 2054 bus_dma_tag_destroy(sc->tx_bd_chain_tag); 2055 2056 2057 /* Free, unmap and destroy all RX buffer descriptor chain pages. */ 2058 for (i = 0; i < RX_PAGES; i++ ) { 2059 if (sc->rx_bd_chain[i] != NULL) 2060 bus_dmamem_free( 2061 sc->rx_bd_chain_tag, 2062 sc->rx_bd_chain[i], 2063 sc->rx_bd_chain_map[i]); 2064 2065 if (sc->rx_bd_chain_map[i] != NULL) { 2066 bus_dmamap_unload( 2067 sc->rx_bd_chain_tag, 2068 sc->rx_bd_chain_map[i]); 2069 bus_dmamap_destroy( 2070 sc->rx_bd_chain_tag, 2071 sc->rx_bd_chain_map[i]); 2072 } 2073 } 2074 2075 /* Destroy the RX buffer descriptor tag. */ 2076 if (sc->rx_bd_chain_tag != NULL) 2077 bus_dma_tag_destroy(sc->rx_bd_chain_tag); 2078 2079 2080 /* Unload and destroy the TX mbuf maps. */ 2081 for (i = 0; i < TOTAL_TX_BD; i++) { 2082 if (sc->tx_mbuf_map[i] != NULL) { 2083 bus_dmamap_unload(sc->tx_mbuf_tag, 2084 sc->tx_mbuf_map[i]); 2085 bus_dmamap_destroy(sc->tx_mbuf_tag, 2086 sc->tx_mbuf_map[i]); 2087 } 2088 } 2089 2090 /* Destroy the TX mbuf tag. */ 2091 if (sc->tx_mbuf_tag != NULL) 2092 bus_dma_tag_destroy(sc->tx_mbuf_tag); 2093 2094 2095 /* Unload and destroy the RX mbuf maps. */ 2096 for (i = 0; i < TOTAL_RX_BD; i++) { 2097 if (sc->rx_mbuf_map[i] != NULL) { 2098 bus_dmamap_unload(sc->rx_mbuf_tag, 2099 sc->rx_mbuf_map[i]); 2100 bus_dmamap_destroy(sc->rx_mbuf_tag, 2101 sc->rx_mbuf_map[i]); 2102 } 2103 } 2104 2105 /* Destroy the RX mbuf tag. */ 2106 if (sc->rx_mbuf_tag != NULL) 2107 bus_dma_tag_destroy(sc->rx_mbuf_tag); 2108 2109 2110 /* Destroy the parent tag */ 2111 if (sc->parent_tag != NULL) 2112 bus_dma_tag_destroy(sc->parent_tag); 2113 2114 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 2115 2116} 2117 2118 2119/****************************************************************************/ 2120/* Get DMA memory from the OS. */ 2121/* */ 2122/* Validates that the OS has provided DMA buffers in response to a */ 2123/* bus_dmamap_load() call and saves the physical address of those buffers. */ 2124/* When the callback is used the OS will return 0 for the mapping function */ 2125/* (bus_dmamap_load()) so we use the value of map_arg->maxsegs to pass any */ 2126/* failures back to the caller. */ 2127/* */ 2128/* Returns: */ 2129/* Nothing. */ 2130/****************************************************************************/ 2131static void 2132bce_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 2133{ 2134 struct bce_dmamap_arg *map_arg = arg; 2135 struct bce_softc *sc = map_arg->sc; 2136 2137 /* Simulate a mapping failure. */ 2138 DBRUNIF(DB_RANDOMTRUE(bce_debug_dma_map_addr_failure), 2139 BCE_PRINTF(sc, "%s(%d): Simulating DMA mapping error.\n", 2140 __FILE__, __LINE__); 2141 error = ENOMEM); 2142 2143 /* Check for an error and signal the caller that an error occurred. */ 2144 if (error || (nseg > map_arg->maxsegs)) { 2145 BCE_PRINTF(sc, "%s(%d): DMA mapping error! error = %d, " 2146 "nseg = %d, maxsegs = %d\n", 2147 __FILE__, __LINE__, error, nseg, map_arg->maxsegs); 2148 map_arg->maxsegs = 0; 2149 goto bce_dma_map_addr_exit; 2150 } 2151 2152 map_arg->busaddr = segs->ds_addr; 2153 2154bce_dma_map_addr_exit: 2155 return; 2156} 2157 2158 2159/****************************************************************************/ 2160/* Map TX buffers into TX buffer descriptors. */ 2161/* */ 2162/* Given a series of DMA memory containting an outgoing frame, map the */ 2163/* segments into the tx_bd structure used by the hardware. */ 2164/* */ 2165/* Returns: */ 2166/* Nothing. */ 2167/****************************************************************************/ 2168static void 2169bce_dma_map_tx_desc(void *arg, bus_dma_segment_t *segs, 2170 int nseg, bus_size_t mapsize, int error) 2171{ 2172 struct bce_dmamap_arg *map_arg; 2173 struct bce_softc *sc; 2174 struct tx_bd *txbd = NULL; 2175 int i = 0; 2176 u16 prod, chain_prod; 2177 u32 prod_bseq; 2178#ifdef BCE_DEBUG 2179 u16 debug_prod; 2180#endif 2181 2182 map_arg = arg; 2183 sc = map_arg->sc; 2184 2185 if (error) { 2186 DBPRINT(sc, BCE_WARN, "%s(): Called with error = %d\n", 2187 __FUNCTION__, error); 2188 return; 2189 } 2190 2191 /* Signal error to caller if there's too many segments */ 2192 if (nseg > map_arg->maxsegs) { 2193 DBPRINT(sc, BCE_WARN, 2194 "%s(): Mapped TX descriptors: max segs = %d, " 2195 "actual segs = %d\n", 2196 __FUNCTION__, map_arg->maxsegs, nseg); 2197 2198 map_arg->maxsegs = 0; 2199 return; 2200 } 2201 2202 /* prod points to an empty tx_bd at this point. */ 2203 prod = map_arg->prod; 2204 chain_prod = map_arg->chain_prod; 2205 prod_bseq = map_arg->prod_bseq; 2206 2207#ifdef BCE_DEBUG 2208 debug_prod = chain_prod; 2209#endif 2210 2211 DBPRINT(sc, BCE_INFO_SEND, 2212 "%s(): Start: prod = 0x%04X, chain_prod = %04X, " 2213 "prod_bseq = 0x%08X\n", 2214 __FUNCTION__, prod, chain_prod, prod_bseq); 2215 2216 /* 2217 * Cycle through each mbuf segment that makes up 2218 * the outgoing frame, gathering the mapping info 2219 * for that segment and creating a tx_bd to for 2220 * the mbuf. 2221 */ 2222 2223 txbd = &sc->tx_bd_chain[TX_PAGE(chain_prod)][TX_IDX(chain_prod)]; 2224 2225 /* Setup the first tx_bd for the first segment. */ 2226 txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr)); 2227 txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr)); 2228 txbd->tx_bd_mss_nbytes = htole16(segs[i].ds_len); 2229 txbd->tx_bd_vlan_tag_flags = htole16(map_arg->tx_flags | 2230 TX_BD_FLAGS_START); 2231 prod_bseq += segs[i].ds_len; 2232 2233 /* Setup any remaing segments. */ 2234 for (i = 1; i < nseg; i++) { 2235 prod = NEXT_TX_BD(prod); 2236 chain_prod = TX_CHAIN_IDX(prod); 2237 2238 txbd = &sc->tx_bd_chain[TX_PAGE(chain_prod)][TX_IDX(chain_prod)]; 2239 2240 txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr)); 2241 txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr)); 2242 txbd->tx_bd_mss_nbytes = htole16(segs[i].ds_len); 2243 txbd->tx_bd_vlan_tag_flags = htole16(map_arg->tx_flags); 2244 2245 prod_bseq += segs[i].ds_len; 2246 } 2247 2248 /* Set the END flag on the last TX buffer descriptor. */ 2249 txbd->tx_bd_vlan_tag_flags |= htole16(TX_BD_FLAGS_END); 2250 2251 DBRUN(BCE_INFO_SEND, bce_dump_tx_chain(sc, debug_prod, nseg)); 2252 2253 DBPRINT(sc, BCE_INFO_SEND, 2254 "%s(): End: prod = 0x%04X, chain_prod = %04X, " 2255 "prod_bseq = 0x%08X\n", 2256 __FUNCTION__, prod, chain_prod, prod_bseq); 2257 2258 /* prod points to the last tx_bd at this point. */ 2259 map_arg->maxsegs = nseg; 2260 map_arg->prod = prod; 2261 map_arg->chain_prod = chain_prod; 2262 map_arg->prod_bseq = prod_bseq; 2263} 2264 2265 2266/****************************************************************************/ 2267/* Allocate any DMA memory needed by the driver. */ 2268/* */ 2269/* Allocates DMA memory needed for the various global structures needed by */ 2270/* hardware. */ 2271/* */ 2272/* Returns: */ 2273/* 0 for success, positive value for failure. */ 2274/****************************************************************************/ 2275static int 2276bce_dma_alloc(device_t dev) 2277{ 2278 struct bce_softc *sc; 2279 int i, error, rc = 0; 2280 struct bce_dmamap_arg map_arg; 2281 2282 sc = device_get_softc(dev); 2283 2284 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 2285 2286 /* 2287 * Allocate the parent bus DMA tag appropriate for PCI. 2288 */ 2289 if (bus_dma_tag_create(NULL, /* parent */ 2290 BCE_DMA_ALIGN, /* alignment */ 2291 BCE_DMA_BOUNDARY, /* boundary */ 2292 sc->max_bus_addr, /* lowaddr */ 2293 BUS_SPACE_MAXADDR, /* highaddr */ 2294 NULL, /* filterfunc */ 2295 NULL, /* filterarg */ 2296 MAXBSIZE, /* maxsize */ 2297 BUS_SPACE_UNRESTRICTED, /* nsegments */ 2298 BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 2299 0, /* flags */ 2300 NULL, /* locfunc */ 2301 NULL, /* lockarg */ 2302 &sc->parent_tag)) { 2303 BCE_PRINTF(sc, "%s(%d): Could not allocate parent DMA tag!\n", 2304 __FILE__, __LINE__); 2305 rc = ENOMEM; 2306 goto bce_dma_alloc_exit; 2307 } 2308 2309 /* 2310 * Create a DMA tag for the status block, allocate and clear the 2311 * memory, map the memory into DMA space, and fetch the physical 2312 * address of the block. 2313 */ 2314 if (bus_dma_tag_create( 2315 sc->parent_tag, /* parent */ 2316 BCE_DMA_ALIGN, /* alignment */ 2317 BCE_DMA_BOUNDARY, /* boundary */ 2318 sc->max_bus_addr, /* lowaddr */ 2319 BUS_SPACE_MAXADDR, /* highaddr */ 2320 NULL, /* filterfunc */ 2321 NULL, /* filterarg */ 2322 BCE_STATUS_BLK_SZ, /* maxsize */ 2323 1, /* nsegments */ 2324 BCE_STATUS_BLK_SZ, /* maxsegsize */ 2325 0, /* flags */ 2326 NULL, /* lockfunc */ 2327 NULL, /* lockarg */ 2328 &sc->status_tag)) { 2329 BCE_PRINTF(sc, "%s(%d): Could not allocate status block DMA tag!\n", 2330 __FILE__, __LINE__); 2331 rc = ENOMEM; 2332 goto bce_dma_alloc_exit; 2333 } 2334 2335 if(bus_dmamem_alloc( 2336 sc->status_tag, /* dmat */ 2337 (void **)&sc->status_block, /* vaddr */ 2338 BUS_DMA_NOWAIT, /* flags */ 2339 &sc->status_map)) { 2340 BCE_PRINTF(sc, "%s(%d): Could not allocate status block DMA memory!\n", 2341 __FILE__, __LINE__); 2342 rc = ENOMEM; 2343 goto bce_dma_alloc_exit; 2344 } 2345 2346 bzero((char *)sc->status_block, BCE_STATUS_BLK_SZ); 2347 2348 map_arg.sc = sc; 2349 map_arg.maxsegs = 1; 2350 2351 error = bus_dmamap_load( 2352 sc->status_tag, /* dmat */ 2353 sc->status_map, /* map */ 2354 sc->status_block, /* buf */ 2355 BCE_STATUS_BLK_SZ, /* buflen */ 2356 bce_dma_map_addr, /* callback */ 2357 &map_arg, /* callbackarg */ 2358 BUS_DMA_NOWAIT); /* flags */ 2359 2360 if(error || (map_arg.maxsegs == 0)) { 2361 BCE_PRINTF(sc, "%s(%d): Could not map status block DMA memory!\n", 2362 __FILE__, __LINE__); 2363 rc = ENOMEM; 2364 goto bce_dma_alloc_exit; 2365 } 2366 2367 sc->status_block_paddr = map_arg.busaddr; 2368 /* DRC - Fix for 64 bit addresses. */ 2369 DBPRINT(sc, BCE_INFO, "status_block_paddr = 0x%08X\n", 2370 (u32) sc->status_block_paddr); 2371 2372 /* 2373 * Create a DMA tag for the statistics block, allocate and clear the 2374 * memory, map the memory into DMA space, and fetch the physical 2375 * address of the block. 2376 */ 2377 if (bus_dma_tag_create( 2378 sc->parent_tag, /* parent */ 2379 BCE_DMA_ALIGN, /* alignment */ 2380 BCE_DMA_BOUNDARY, /* boundary */ 2381 sc->max_bus_addr, /* lowaddr */ 2382 BUS_SPACE_MAXADDR, /* highaddr */ 2383 NULL, /* filterfunc */ 2384 NULL, /* filterarg */ 2385 BCE_STATS_BLK_SZ, /* maxsize */ 2386 1, /* nsegments */ 2387 BCE_STATS_BLK_SZ, /* maxsegsize */ 2388 0, /* flags */ 2389 NULL, /* lockfunc */ 2390 NULL, /* lockarg */ 2391 &sc->stats_tag)) { 2392 BCE_PRINTF(sc, "%s(%d): Could not allocate statistics block DMA tag!\n", 2393 __FILE__, __LINE__); 2394 rc = ENOMEM; 2395 goto bce_dma_alloc_exit; 2396 } 2397 2398 if (bus_dmamem_alloc( 2399 sc->stats_tag, /* dmat */ 2400 (void **)&sc->stats_block, /* vaddr */ 2401 BUS_DMA_NOWAIT, /* flags */ 2402 &sc->stats_map)) { 2403 BCE_PRINTF(sc, "%s(%d): Could not allocate statistics block DMA memory!\n", 2404 __FILE__, __LINE__); 2405 rc = ENOMEM; 2406 goto bce_dma_alloc_exit; 2407 } 2408 2409 bzero((char *)sc->stats_block, BCE_STATS_BLK_SZ); 2410 2411 map_arg.sc = sc; 2412 map_arg.maxsegs = 1; 2413 2414 error = bus_dmamap_load( 2415 sc->stats_tag, /* dmat */ 2416 sc->stats_map, /* map */ 2417 sc->stats_block, /* buf */ 2418 BCE_STATS_BLK_SZ, /* buflen */ 2419 bce_dma_map_addr, /* callback */ 2420 &map_arg, /* callbackarg */ 2421 BUS_DMA_NOWAIT); /* flags */ 2422 2423 if(error || (map_arg.maxsegs == 0)) { 2424 BCE_PRINTF(sc, "%s(%d): Could not map statistics block DMA memory!\n", 2425 __FILE__, __LINE__); 2426 rc = ENOMEM; 2427 goto bce_dma_alloc_exit; 2428 } 2429 2430 sc->stats_block_paddr = map_arg.busaddr; 2431 /* DRC - Fix for 64 bit address. */ 2432 DBPRINT(sc,BCE_INFO, "stats_block_paddr = 0x%08X\n", 2433 (u32) sc->stats_block_paddr); 2434 2435 /* 2436 * Create a DMA tag for the TX buffer descriptor chain, 2437 * allocate and clear the memory, and fetch the 2438 * physical address of the block. 2439 */ 2440 if(bus_dma_tag_create( 2441 sc->parent_tag, /* parent */ 2442 BCM_PAGE_SIZE, /* alignment */ 2443 BCE_DMA_BOUNDARY, /* boundary */ 2444 sc->max_bus_addr, /* lowaddr */ 2445 BUS_SPACE_MAXADDR, /* highaddr */ 2446 NULL, /* filterfunc */ 2447 NULL, /* filterarg */ 2448 BCE_TX_CHAIN_PAGE_SZ, /* maxsize */ 2449 1, /* nsegments */ 2450 BCE_TX_CHAIN_PAGE_SZ, /* maxsegsize */ 2451 0, /* flags */ 2452 NULL, /* lockfunc */ 2453 NULL, /* lockarg */ 2454 &sc->tx_bd_chain_tag)) { 2455 BCE_PRINTF(sc, "%s(%d): Could not allocate TX descriptor chain DMA tag!\n", 2456 __FILE__, __LINE__); 2457 rc = ENOMEM; 2458 goto bce_dma_alloc_exit; 2459 } 2460 2461 for (i = 0; i < TX_PAGES; i++) { 2462 2463 if(bus_dmamem_alloc( 2464 sc->tx_bd_chain_tag, /* tag */ 2465 (void **)&sc->tx_bd_chain[i], /* vaddr */ 2466 BUS_DMA_NOWAIT, /* flags */ 2467 &sc->tx_bd_chain_map[i])) { 2468 BCE_PRINTF(sc, "%s(%d): Could not allocate TX descriptor " 2469 "chain DMA memory!\n", __FILE__, __LINE__); 2470 rc = ENOMEM; 2471 goto bce_dma_alloc_exit; 2472 } 2473 2474 map_arg.maxsegs = 1; 2475 map_arg.sc = sc; 2476 2477 error = bus_dmamap_load( 2478 sc->tx_bd_chain_tag, /* dmat */ 2479 sc->tx_bd_chain_map[i], /* map */ 2480 sc->tx_bd_chain[i], /* buf */ 2481 BCE_TX_CHAIN_PAGE_SZ, /* buflen */ 2482 bce_dma_map_addr, /* callback */ 2483 &map_arg, /* callbackarg */ 2484 BUS_DMA_NOWAIT); /* flags */ 2485 2486 if(error || (map_arg.maxsegs == 0)) { 2487 BCE_PRINTF(sc, "%s(%d): Could not map TX descriptor chain DMA memory!\n", 2488 __FILE__, __LINE__); 2489 rc = ENOMEM; 2490 goto bce_dma_alloc_exit; 2491 } 2492 2493 sc->tx_bd_chain_paddr[i] = map_arg.busaddr; 2494 /* DRC - Fix for 64 bit systems. */ 2495 DBPRINT(sc, BCE_INFO, "tx_bd_chain_paddr[%d] = 0x%08X\n", 2496 i, (u32) sc->tx_bd_chain_paddr[i]); 2497 } 2498 2499 /* Create a DMA tag for TX mbufs. */ 2500 if (bus_dma_tag_create( 2501 sc->parent_tag, /* parent */ 2502 BCE_DMA_ALIGN, /* alignment */ 2503 BCE_DMA_BOUNDARY, /* boundary */ 2504 sc->max_bus_addr, /* lowaddr */ 2505 BUS_SPACE_MAXADDR, /* highaddr */ 2506 NULL, /* filterfunc */ 2507 NULL, /* filterarg */ 2508 MCLBYTES * BCE_MAX_SEGMENTS, /* maxsize */ 2509 BCE_MAX_SEGMENTS, /* nsegments */ 2510 MCLBYTES, /* maxsegsize */ 2511 0, /* flags */ 2512 NULL, /* lockfunc */ 2513 NULL, /* lockarg */ 2514 &sc->tx_mbuf_tag)) { 2515 BCE_PRINTF(sc, "%s(%d): Could not allocate TX mbuf DMA tag!\n", 2516 __FILE__, __LINE__); 2517 rc = ENOMEM; 2518 goto bce_dma_alloc_exit; 2519 } 2520 2521 /* Create DMA maps for the TX mbufs clusters. */ 2522 for (i = 0; i < TOTAL_TX_BD; i++) { 2523 if (bus_dmamap_create(sc->tx_mbuf_tag, BUS_DMA_NOWAIT, 2524 &sc->tx_mbuf_map[i])) { 2525 BCE_PRINTF(sc, "%s(%d): Unable to create TX mbuf DMA map!\n", 2526 __FILE__, __LINE__); 2527 rc = ENOMEM; 2528 goto bce_dma_alloc_exit; 2529 } 2530 } 2531 2532 /* 2533 * Create a DMA tag for the RX buffer descriptor chain, 2534 * allocate and clear the memory, and fetch the physical 2535 * address of the blocks. 2536 */ 2537 if (bus_dma_tag_create( 2538 sc->parent_tag, /* parent */ 2539 BCM_PAGE_SIZE, /* alignment */ 2540 BCE_DMA_BOUNDARY, /* boundary */ 2541 BUS_SPACE_MAXADDR, /* lowaddr */ 2542 sc->max_bus_addr, /* lowaddr */ 2543 NULL, /* filter */ 2544 NULL, /* filterarg */ 2545 BCE_RX_CHAIN_PAGE_SZ, /* maxsize */ 2546 1, /* nsegments */ 2547 BCE_RX_CHAIN_PAGE_SZ, /* maxsegsize */ 2548 0, /* flags */ 2549 NULL, /* lockfunc */ 2550 NULL, /* lockarg */ 2551 &sc->rx_bd_chain_tag)) { 2552 BCE_PRINTF(sc, "%s(%d): Could not allocate RX descriptor chain DMA tag!\n", 2553 __FILE__, __LINE__); 2554 rc = ENOMEM; 2555 goto bce_dma_alloc_exit; 2556 } 2557 2558 for (i = 0; i < RX_PAGES; i++) { 2559 2560 if (bus_dmamem_alloc( 2561 sc->rx_bd_chain_tag, /* tag */ 2562 (void **)&sc->rx_bd_chain[i], /* vaddr */ 2563 BUS_DMA_NOWAIT, /* flags */ 2564 &sc->rx_bd_chain_map[i])) { 2565 BCE_PRINTF(sc, "%s(%d): Could not allocate RX descriptor chain " 2566 "DMA memory!\n", __FILE__, __LINE__); 2567 rc = ENOMEM; 2568 goto bce_dma_alloc_exit; 2569 } 2570 2571 bzero((char *)sc->rx_bd_chain[i], BCE_RX_CHAIN_PAGE_SZ); 2572 2573 map_arg.maxsegs = 1; 2574 map_arg.sc = sc; 2575 2576 error = bus_dmamap_load( 2577 sc->rx_bd_chain_tag, /* dmat */ 2578 sc->rx_bd_chain_map[i], /* map */ 2579 sc->rx_bd_chain[i], /* buf */ 2580 BCE_RX_CHAIN_PAGE_SZ, /* buflen */ 2581 bce_dma_map_addr, /* callback */ 2582 &map_arg, /* callbackarg */ 2583 BUS_DMA_NOWAIT); /* flags */ 2584 2585 if(error || (map_arg.maxsegs == 0)) { 2586 BCE_PRINTF(sc, "%s(%d): Could not map RX descriptor chain DMA memory!\n", 2587 __FILE__, __LINE__); 2588 rc = ENOMEM; 2589 goto bce_dma_alloc_exit; 2590 } 2591 2592 sc->rx_bd_chain_paddr[i] = map_arg.busaddr; 2593 /* DRC - Fix for 64 bit systems. */ 2594 DBPRINT(sc, BCE_INFO, "rx_bd_chain_paddr[%d] = 0x%08X\n", 2595 i, (u32) sc->rx_bd_chain_paddr[i]); 2596 } 2597 2598 /* 2599 * Create a DMA tag for RX mbufs. 2600 */ 2601 if (bus_dma_tag_create( 2602 sc->parent_tag, /* parent */ 2603 BCE_DMA_ALIGN, /* alignment */ 2604 BCE_DMA_BOUNDARY, /* boundary */ 2605 sc->max_bus_addr, /* lowaddr */ 2606 BUS_SPACE_MAXADDR, /* highaddr */ 2607 NULL, /* filterfunc */ 2608 NULL, /* filterarg */ 2609 MJUM9BYTES, /* maxsize */ 2610 BCE_MAX_SEGMENTS, /* nsegments */ 2611 MJUM9BYTES, /* maxsegsize */ 2612 0, /* flags */ 2613 NULL, /* lockfunc */ 2614 NULL, /* lockarg */ 2615 &sc->rx_mbuf_tag)) { 2616 BCE_PRINTF(sc, "%s(%d): Could not allocate RX mbuf DMA tag!\n", 2617 __FILE__, __LINE__); 2618 rc = ENOMEM; 2619 goto bce_dma_alloc_exit; 2620 } 2621 2622 /* Create DMA maps for the RX mbuf clusters. */ 2623 for (i = 0; i < TOTAL_RX_BD; i++) { 2624 if (bus_dmamap_create(sc->rx_mbuf_tag, BUS_DMA_NOWAIT, 2625 &sc->rx_mbuf_map[i])) { 2626 BCE_PRINTF(sc, "%s(%d): Unable to create RX mbuf DMA map!\n", 2627 __FILE__, __LINE__); 2628 rc = ENOMEM; 2629 goto bce_dma_alloc_exit; 2630 } 2631 } 2632 2633bce_dma_alloc_exit: 2634 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 2635 2636 return(rc); 2637} 2638 2639 2640/****************************************************************************/ 2641/* Release all resources used by the driver. */ 2642/* */ 2643/* Releases all resources acquired by the driver including interrupts, */ 2644/* interrupt handler, interfaces, mutexes, and DMA memory. */ 2645/* */ 2646/* Returns: */ 2647/* Nothing. */ 2648/****************************************************************************/ 2649static void 2650bce_release_resources(struct bce_softc *sc) 2651{ 2652 device_t dev; 2653 2654 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 2655 2656 dev = sc->bce_dev; 2657 2658 bce_dma_free(sc); 2659 2660 if (sc->bce_intrhand != NULL) 2661 bus_teardown_intr(dev, sc->bce_irq, sc->bce_intrhand); 2662 2663 if (sc->bce_irq != NULL) 2664 bus_release_resource(dev, 2665 SYS_RES_IRQ, 2666 0, 2667 sc->bce_irq); 2668 2669 if (sc->bce_res != NULL) 2670 bus_release_resource(dev, 2671 SYS_RES_MEMORY, 2672 PCIR_BAR(0), 2673 sc->bce_res); 2674 2675 if (sc->bce_ifp != NULL) 2676 if_free(sc->bce_ifp); 2677 2678 2679 if (mtx_initialized(&sc->bce_mtx)) 2680 BCE_LOCK_DESTROY(sc); 2681 2682 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 2683 2684} 2685 2686 2687/****************************************************************************/ 2688/* Firmware synchronization. */ 2689/* */ 2690/* Before performing certain events such as a chip reset, synchronize with */ 2691/* the firmware first. */ 2692/* */ 2693/* Returns: */ 2694/* 0 for success, positive value for failure. */ 2695/****************************************************************************/ 2696static int 2697bce_fw_sync(struct bce_softc *sc, u32 msg_data) 2698{ 2699 int i, rc = 0; 2700 u32 val; 2701 2702 /* Don't waste any time if we've timed out before. */ 2703 if (sc->bce_fw_timed_out) { 2704 rc = EBUSY; 2705 goto bce_fw_sync_exit; 2706 } 2707 2708 /* Increment the message sequence number. */ 2709 sc->bce_fw_wr_seq++; 2710 msg_data |= sc->bce_fw_wr_seq; 2711 2712 DBPRINT(sc, BCE_VERBOSE, "bce_fw_sync(): msg_data = 0x%08X\n", msg_data); 2713 2714 /* Send the message to the bootcode driver mailbox. */ 2715 REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_MB, msg_data); 2716 2717 /* Wait for the bootcode to acknowledge the message. */ 2718 for (i = 0; i < FW_ACK_TIME_OUT_MS; i++) { 2719 /* Check for a response in the bootcode firmware mailbox. */ 2720 val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_FW_MB); 2721 if ((val & BCE_FW_MSG_ACK) == (msg_data & BCE_DRV_MSG_SEQ)) 2722 break; 2723 DELAY(1000); 2724 } 2725 2726 /* If we've timed out, tell the bootcode that we've stopped waiting. */ 2727 if (((val & BCE_FW_MSG_ACK) != (msg_data & BCE_DRV_MSG_SEQ)) && 2728 ((msg_data & BCE_DRV_MSG_DATA) != BCE_DRV_MSG_DATA_WAIT0)) { 2729 2730 BCE_PRINTF(sc, "%s(%d): Firmware synchronization timeout! " 2731 "msg_data = 0x%08X\n", 2732 __FILE__, __LINE__, msg_data); 2733 2734 msg_data &= ~BCE_DRV_MSG_CODE; 2735 msg_data |= BCE_DRV_MSG_CODE_FW_TIMEOUT; 2736 2737 REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_MB, msg_data); 2738 2739 sc->bce_fw_timed_out = 1; 2740 rc = EBUSY; 2741 } 2742 2743bce_fw_sync_exit: 2744 return (rc); 2745} 2746 2747 2748/****************************************************************************/ 2749/* Load Receive Virtual 2 Physical (RV2P) processor firmware. */ 2750/* */ 2751/* Returns: */ 2752/* Nothing. */ 2753/****************************************************************************/ 2754static void 2755bce_load_rv2p_fw(struct bce_softc *sc, u32 *rv2p_code, 2756 u32 rv2p_code_len, u32 rv2p_proc) 2757{ 2758 int i; 2759 u32 val; 2760 2761 for (i = 0; i < rv2p_code_len; i += 8) { 2762 REG_WR(sc, BCE_RV2P_INSTR_HIGH, *rv2p_code); 2763 rv2p_code++; 2764 REG_WR(sc, BCE_RV2P_INSTR_LOW, *rv2p_code); 2765 rv2p_code++; 2766 2767 if (rv2p_proc == RV2P_PROC1) { 2768 val = (i / 8) | BCE_RV2P_PROC1_ADDR_CMD_RDWR; 2769 REG_WR(sc, BCE_RV2P_PROC1_ADDR_CMD, val); 2770 } 2771 else { 2772 val = (i / 8) | BCE_RV2P_PROC2_ADDR_CMD_RDWR; 2773 REG_WR(sc, BCE_RV2P_PROC2_ADDR_CMD, val); 2774 } 2775 } 2776 2777 /* Reset the processor, un-stall is done later. */ 2778 if (rv2p_proc == RV2P_PROC1) { 2779 REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC1_RESET); 2780 } 2781 else { 2782 REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC2_RESET); 2783 } 2784} 2785 2786 2787/****************************************************************************/ 2788/* Load RISC processor firmware. */ 2789/* */ 2790/* Loads firmware from the file if_bcefw.h into the scratchpad memory */ 2791/* associated with a particular processor. */ 2792/* */ 2793/* Returns: */ 2794/* Nothing. */ 2795/****************************************************************************/ 2796static void 2797bce_load_cpu_fw(struct bce_softc *sc, struct cpu_reg *cpu_reg, 2798 struct fw_info *fw) 2799{ 2800 u32 offset; 2801 u32 val; 2802 2803 /* Halt the CPU. */ 2804 val = REG_RD_IND(sc, cpu_reg->mode); 2805 val |= cpu_reg->mode_value_halt; 2806 REG_WR_IND(sc, cpu_reg->mode, val); 2807 REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear); 2808 2809 /* Load the Text area. */ 2810 offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base); 2811 if (fw->text) { 2812 int j; 2813 2814 for (j = 0; j < (fw->text_len / 4); j++, offset += 4) { 2815 REG_WR_IND(sc, offset, fw->text[j]); 2816 } 2817 } 2818 2819 /* Load the Data area. */ 2820 offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base); 2821 if (fw->data) { 2822 int j; 2823 2824 for (j = 0; j < (fw->data_len / 4); j++, offset += 4) { 2825 REG_WR_IND(sc, offset, fw->data[j]); 2826 } 2827 } 2828 2829 /* Load the SBSS area. */ 2830 offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base); 2831 if (fw->sbss) { 2832 int j; 2833 2834 for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) { 2835 REG_WR_IND(sc, offset, fw->sbss[j]); 2836 } 2837 } 2838 2839 /* Load the BSS area. */ 2840 offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base); 2841 if (fw->bss) { 2842 int j; 2843 2844 for (j = 0; j < (fw->bss_len/4); j++, offset += 4) { 2845 REG_WR_IND(sc, offset, fw->bss[j]); 2846 } 2847 } 2848 2849 /* Load the Read-Only area. */ 2850 offset = cpu_reg->spad_base + 2851 (fw->rodata_addr - cpu_reg->mips_view_base); 2852 if (fw->rodata) { 2853 int j; 2854 2855 for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) { 2856 REG_WR_IND(sc, offset, fw->rodata[j]); 2857 } 2858 } 2859 2860 /* Clear the pre-fetch instruction. */ 2861 REG_WR_IND(sc, cpu_reg->inst, 0); 2862 REG_WR_IND(sc, cpu_reg->pc, fw->start_addr); 2863 2864 /* Start the CPU. */ 2865 val = REG_RD_IND(sc, cpu_reg->mode); 2866 val &= ~cpu_reg->mode_value_halt; 2867 REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear); 2868 REG_WR_IND(sc, cpu_reg->mode, val); 2869} 2870 2871 2872/****************************************************************************/ 2873/* Initialize the RV2P, RX, TX, TPAT, and COM CPUs. */ 2874/* */ 2875/* Loads the firmware for each CPU and starts the CPU. */ 2876/* */ 2877/* Returns: */ 2878/* Nothing. */ 2879/****************************************************************************/ 2880static void 2881bce_init_cpus(struct bce_softc *sc) 2882{ 2883 struct cpu_reg cpu_reg; 2884 struct fw_info fw; 2885 2886 /* Initialize the RV2P processor. */ 2887 bce_load_rv2p_fw(sc, bce_rv2p_proc1, sizeof(bce_rv2p_proc1), RV2P_PROC1); 2888 bce_load_rv2p_fw(sc, bce_rv2p_proc2, sizeof(bce_rv2p_proc2), RV2P_PROC2); 2889 2890 /* Initialize the RX Processor. */ 2891 cpu_reg.mode = BCE_RXP_CPU_MODE; 2892 cpu_reg.mode_value_halt = BCE_RXP_CPU_MODE_SOFT_HALT; 2893 cpu_reg.mode_value_sstep = BCE_RXP_CPU_MODE_STEP_ENA; 2894 cpu_reg.state = BCE_RXP_CPU_STATE; 2895 cpu_reg.state_value_clear = 0xffffff; 2896 cpu_reg.gpr0 = BCE_RXP_CPU_REG_FILE; 2897 cpu_reg.evmask = BCE_RXP_CPU_EVENT_MASK; 2898 cpu_reg.pc = BCE_RXP_CPU_PROGRAM_COUNTER; 2899 cpu_reg.inst = BCE_RXP_CPU_INSTRUCTION; 2900 cpu_reg.bp = BCE_RXP_CPU_HW_BREAKPOINT; 2901 cpu_reg.spad_base = BCE_RXP_SCRATCH; 2902 cpu_reg.mips_view_base = 0x8000000; 2903 2904 fw.ver_major = bce_RXP_b06FwReleaseMajor; 2905 fw.ver_minor = bce_RXP_b06FwReleaseMinor; 2906 fw.ver_fix = bce_RXP_b06FwReleaseFix; 2907 fw.start_addr = bce_RXP_b06FwStartAddr; 2908 2909 fw.text_addr = bce_RXP_b06FwTextAddr; 2910 fw.text_len = bce_RXP_b06FwTextLen; 2911 fw.text_index = 0; 2912 fw.text = bce_RXP_b06FwText; 2913 2914 fw.data_addr = bce_RXP_b06FwDataAddr; 2915 fw.data_len = bce_RXP_b06FwDataLen; 2916 fw.data_index = 0; 2917 fw.data = bce_RXP_b06FwData; 2918 2919 fw.sbss_addr = bce_RXP_b06FwSbssAddr; 2920 fw.sbss_len = bce_RXP_b06FwSbssLen; 2921 fw.sbss_index = 0; 2922 fw.sbss = bce_RXP_b06FwSbss; 2923 2924 fw.bss_addr = bce_RXP_b06FwBssAddr; 2925 fw.bss_len = bce_RXP_b06FwBssLen; 2926 fw.bss_index = 0; 2927 fw.bss = bce_RXP_b06FwBss; 2928 2929 fw.rodata_addr = bce_RXP_b06FwRodataAddr; 2930 fw.rodata_len = bce_RXP_b06FwRodataLen; 2931 fw.rodata_index = 0; 2932 fw.rodata = bce_RXP_b06FwRodata; 2933 2934 DBPRINT(sc, BCE_INFO_RESET, "Loading RX firmware.\n"); 2935 bce_load_cpu_fw(sc, &cpu_reg, &fw); 2936 2937 /* Initialize the TX Processor. */ 2938 cpu_reg.mode = BCE_TXP_CPU_MODE; 2939 cpu_reg.mode_value_halt = BCE_TXP_CPU_MODE_SOFT_HALT; 2940 cpu_reg.mode_value_sstep = BCE_TXP_CPU_MODE_STEP_ENA; 2941 cpu_reg.state = BCE_TXP_CPU_STATE; 2942 cpu_reg.state_value_clear = 0xffffff; 2943 cpu_reg.gpr0 = BCE_TXP_CPU_REG_FILE; 2944 cpu_reg.evmask = BCE_TXP_CPU_EVENT_MASK; 2945 cpu_reg.pc = BCE_TXP_CPU_PROGRAM_COUNTER; 2946 cpu_reg.inst = BCE_TXP_CPU_INSTRUCTION; 2947 cpu_reg.bp = BCE_TXP_CPU_HW_BREAKPOINT; 2948 cpu_reg.spad_base = BCE_TXP_SCRATCH; 2949 cpu_reg.mips_view_base = 0x8000000; 2950 2951 fw.ver_major = bce_TXP_b06FwReleaseMajor; 2952 fw.ver_minor = bce_TXP_b06FwReleaseMinor; 2953 fw.ver_fix = bce_TXP_b06FwReleaseFix; 2954 fw.start_addr = bce_TXP_b06FwStartAddr; 2955 2956 fw.text_addr = bce_TXP_b06FwTextAddr; 2957 fw.text_len = bce_TXP_b06FwTextLen; 2958 fw.text_index = 0; 2959 fw.text = bce_TXP_b06FwText; 2960 2961 fw.data_addr = bce_TXP_b06FwDataAddr; 2962 fw.data_len = bce_TXP_b06FwDataLen; 2963 fw.data_index = 0; 2964 fw.data = bce_TXP_b06FwData; 2965 2966 fw.sbss_addr = bce_TXP_b06FwSbssAddr; 2967 fw.sbss_len = bce_TXP_b06FwSbssLen; 2968 fw.sbss_index = 0; 2969 fw.sbss = bce_TXP_b06FwSbss; 2970 2971 fw.bss_addr = bce_TXP_b06FwBssAddr; 2972 fw.bss_len = bce_TXP_b06FwBssLen; 2973 fw.bss_index = 0; 2974 fw.bss = bce_TXP_b06FwBss; 2975 2976 fw.rodata_addr = bce_TXP_b06FwRodataAddr; 2977 fw.rodata_len = bce_TXP_b06FwRodataLen; 2978 fw.rodata_index = 0; 2979 fw.rodata = bce_TXP_b06FwRodata; 2980 2981 DBPRINT(sc, BCE_INFO_RESET, "Loading TX firmware.\n"); 2982 bce_load_cpu_fw(sc, &cpu_reg, &fw); 2983 2984 /* Initialize the TX Patch-up Processor. */ 2985 cpu_reg.mode = BCE_TPAT_CPU_MODE; 2986 cpu_reg.mode_value_halt = BCE_TPAT_CPU_MODE_SOFT_HALT; 2987 cpu_reg.mode_value_sstep = BCE_TPAT_CPU_MODE_STEP_ENA; 2988 cpu_reg.state = BCE_TPAT_CPU_STATE; 2989 cpu_reg.state_value_clear = 0xffffff; 2990 cpu_reg.gpr0 = BCE_TPAT_CPU_REG_FILE; 2991 cpu_reg.evmask = BCE_TPAT_CPU_EVENT_MASK; 2992 cpu_reg.pc = BCE_TPAT_CPU_PROGRAM_COUNTER; 2993 cpu_reg.inst = BCE_TPAT_CPU_INSTRUCTION; 2994 cpu_reg.bp = BCE_TPAT_CPU_HW_BREAKPOINT; 2995 cpu_reg.spad_base = BCE_TPAT_SCRATCH; 2996 cpu_reg.mips_view_base = 0x8000000; 2997 2998 fw.ver_major = bce_TPAT_b06FwReleaseMajor; 2999 fw.ver_minor = bce_TPAT_b06FwReleaseMinor; 3000 fw.ver_fix = bce_TPAT_b06FwReleaseFix; 3001 fw.start_addr = bce_TPAT_b06FwStartAddr; 3002 3003 fw.text_addr = bce_TPAT_b06FwTextAddr; 3004 fw.text_len = bce_TPAT_b06FwTextLen; 3005 fw.text_index = 0; 3006 fw.text = bce_TPAT_b06FwText; 3007 3008 fw.data_addr = bce_TPAT_b06FwDataAddr; 3009 fw.data_len = bce_TPAT_b06FwDataLen; 3010 fw.data_index = 0; 3011 fw.data = bce_TPAT_b06FwData; 3012 3013 fw.sbss_addr = bce_TPAT_b06FwSbssAddr; 3014 fw.sbss_len = bce_TPAT_b06FwSbssLen; 3015 fw.sbss_index = 0; 3016 fw.sbss = bce_TPAT_b06FwSbss; 3017 3018 fw.bss_addr = bce_TPAT_b06FwBssAddr; 3019 fw.bss_len = bce_TPAT_b06FwBssLen; 3020 fw.bss_index = 0; 3021 fw.bss = bce_TPAT_b06FwBss; 3022 3023 fw.rodata_addr = bce_TPAT_b06FwRodataAddr; 3024 fw.rodata_len = bce_TPAT_b06FwRodataLen; 3025 fw.rodata_index = 0; 3026 fw.rodata = bce_TPAT_b06FwRodata; 3027 3028 DBPRINT(sc, BCE_INFO_RESET, "Loading TPAT firmware.\n"); 3029 bce_load_cpu_fw(sc, &cpu_reg, &fw); 3030 3031 /* Initialize the Completion Processor. */ 3032 cpu_reg.mode = BCE_COM_CPU_MODE; 3033 cpu_reg.mode_value_halt = BCE_COM_CPU_MODE_SOFT_HALT; 3034 cpu_reg.mode_value_sstep = BCE_COM_CPU_MODE_STEP_ENA; 3035 cpu_reg.state = BCE_COM_CPU_STATE; 3036 cpu_reg.state_value_clear = 0xffffff; 3037 cpu_reg.gpr0 = BCE_COM_CPU_REG_FILE; 3038 cpu_reg.evmask = BCE_COM_CPU_EVENT_MASK; 3039 cpu_reg.pc = BCE_COM_CPU_PROGRAM_COUNTER; 3040 cpu_reg.inst = BCE_COM_CPU_INSTRUCTION; 3041 cpu_reg.bp = BCE_COM_CPU_HW_BREAKPOINT; 3042 cpu_reg.spad_base = BCE_COM_SCRATCH; 3043 cpu_reg.mips_view_base = 0x8000000; 3044 3045 fw.ver_major = bce_COM_b06FwReleaseMajor; 3046 fw.ver_minor = bce_COM_b06FwReleaseMinor; 3047 fw.ver_fix = bce_COM_b06FwReleaseFix; 3048 fw.start_addr = bce_COM_b06FwStartAddr; 3049 3050 fw.text_addr = bce_COM_b06FwTextAddr; 3051 fw.text_len = bce_COM_b06FwTextLen; 3052 fw.text_index = 0; 3053 fw.text = bce_COM_b06FwText; 3054 3055 fw.data_addr = bce_COM_b06FwDataAddr; 3056 fw.data_len = bce_COM_b06FwDataLen; 3057 fw.data_index = 0; 3058 fw.data = bce_COM_b06FwData; 3059 3060 fw.sbss_addr = bce_COM_b06FwSbssAddr; 3061 fw.sbss_len = bce_COM_b06FwSbssLen; 3062 fw.sbss_index = 0; 3063 fw.sbss = bce_COM_b06FwSbss; 3064 3065 fw.bss_addr = bce_COM_b06FwBssAddr; 3066 fw.bss_len = bce_COM_b06FwBssLen; 3067 fw.bss_index = 0; 3068 fw.bss = bce_COM_b06FwBss; 3069 3070 fw.rodata_addr = bce_COM_b06FwRodataAddr; 3071 fw.rodata_len = bce_COM_b06FwRodataLen; 3072 fw.rodata_index = 0; 3073 fw.rodata = bce_COM_b06FwRodata; 3074 3075 DBPRINT(sc, BCE_INFO_RESET, "Loading COM firmware.\n"); 3076 bce_load_cpu_fw(sc, &cpu_reg, &fw); 3077} 3078 3079 3080/****************************************************************************/ 3081/* Initialize context memory. */ 3082/* */ 3083/* Clears the memory associated with each Context ID (CID). */ 3084/* */ 3085/* Returns: */ 3086/* Nothing. */ 3087/****************************************************************************/ 3088static void 3089bce_init_context(struct bce_softc *sc) 3090{ 3091 u32 vcid; 3092 3093 vcid = 96; 3094 while (vcid) { 3095 u32 vcid_addr, pcid_addr, offset; 3096 3097 vcid--; 3098 3099 vcid_addr = GET_CID_ADDR(vcid); 3100 pcid_addr = vcid_addr; 3101 3102 REG_WR(sc, BCE_CTX_VIRT_ADDR, 0x00); 3103 REG_WR(sc, BCE_CTX_PAGE_TBL, pcid_addr); 3104 3105 /* Zero out the context. */ 3106 for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) { 3107 CTX_WR(sc, 0x00, offset, 0); 3108 } 3109 3110 REG_WR(sc, BCE_CTX_VIRT_ADDR, vcid_addr); 3111 REG_WR(sc, BCE_CTX_PAGE_TBL, pcid_addr); 3112 } 3113} 3114 3115 3116/****************************************************************************/ 3117/* Fetch the permanent MAC address of the controller. */ 3118/* */ 3119/* Returns: */ 3120/* Nothing. */ 3121/****************************************************************************/ 3122static void 3123bce_get_mac_addr(struct bce_softc *sc) 3124{ 3125 u32 mac_lo = 0, mac_hi = 0; 3126 3127 /* 3128 * The NetXtreme II bootcode populates various NIC 3129 * power-on and runtime configuration items in a 3130 * shared memory area. The factory configured MAC 3131 * address is available from both NVRAM and the 3132 * shared memory area so we'll read the value from 3133 * shared memory for speed. 3134 */ 3135 3136 mac_hi = REG_RD_IND(sc, sc->bce_shmem_base + 3137 BCE_PORT_HW_CFG_MAC_UPPER); 3138 mac_lo = REG_RD_IND(sc, sc->bce_shmem_base + 3139 BCE_PORT_HW_CFG_MAC_LOWER); 3140 3141 if ((mac_lo == 0) && (mac_hi == 0)) { 3142 BCE_PRINTF(sc, "%s(%d): Invalid Ethernet address!\n", 3143 __FILE__, __LINE__); 3144 } else { 3145 sc->eaddr[0] = (u_char)(mac_hi >> 8); 3146 sc->eaddr[1] = (u_char)(mac_hi >> 0); 3147 sc->eaddr[2] = (u_char)(mac_lo >> 24); 3148 sc->eaddr[3] = (u_char)(mac_lo >> 16); 3149 sc->eaddr[4] = (u_char)(mac_lo >> 8); 3150 sc->eaddr[5] = (u_char)(mac_lo >> 0); 3151 } 3152 3153 DBPRINT(sc, BCE_INFO, "Permanent Ethernet address = %6D\n", sc->eaddr, ":"); 3154} 3155 3156 3157/****************************************************************************/ 3158/* Program the MAC address. */ 3159/* */ 3160/* Returns: */ 3161/* Nothing. */ 3162/****************************************************************************/ 3163static void 3164bce_set_mac_addr(struct bce_softc *sc) 3165{ 3166 u32 val; 3167 u8 *mac_addr = sc->eaddr; 3168 3169 DBPRINT(sc, BCE_INFO, "Setting Ethernet address = %6D\n", sc->eaddr, ":"); 3170 3171 val = (mac_addr[0] << 8) | mac_addr[1]; 3172 3173 REG_WR(sc, BCE_EMAC_MAC_MATCH0, val); 3174 3175 val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | 3176 (mac_addr[4] << 8) | mac_addr[5]; 3177 3178 REG_WR(sc, BCE_EMAC_MAC_MATCH1, val); 3179} 3180 3181 3182/****************************************************************************/ 3183/* Stop the controller. */ 3184/* */ 3185/* Returns: */ 3186/* Nothing. */ 3187/****************************************************************************/ 3188static void 3189bce_stop(struct bce_softc *sc) 3190{ 3191 struct ifnet *ifp; 3192 struct ifmedia_entry *ifm; 3193 struct mii_data *mii = NULL; 3194 int mtmp, itmp; 3195 3196 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3197 3198 BCE_LOCK_ASSERT(sc); 3199 3200 ifp = sc->bce_ifp; 3201 3202 mii = device_get_softc(sc->bce_miibus); 3203 3204 callout_stop(&sc->bce_stat_ch); 3205 3206 /* Disable the transmit/receive blocks. */ 3207 REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS, 0x5ffffff); 3208 REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS); 3209 DELAY(20); 3210 3211 bce_disable_intr(sc); 3212 3213 /* Tell firmware that the driver is going away. */ 3214 bce_reset(sc, BCE_DRV_MSG_CODE_SUSPEND_NO_WOL); 3215 3216 /* Free the RX lists. */ 3217 bce_free_rx_chain(sc); 3218 3219 /* Free TX buffers. */ 3220 bce_free_tx_chain(sc); 3221 3222 /* 3223 * Isolate/power down the PHY, but leave the media selection 3224 * unchanged so that things will be put back to normal when 3225 * we bring the interface back up. 3226 */ 3227 3228 itmp = ifp->if_flags; 3229 ifp->if_flags |= IFF_UP; 3230 /* 3231 * If we are called from bce_detach(), mii is already NULL. 3232 */ 3233 if (mii != NULL) { 3234 ifm = mii->mii_media.ifm_cur; 3235 mtmp = ifm->ifm_media; 3236 ifm->ifm_media = IFM_ETHER | IFM_NONE; 3237 mii_mediachg(mii); 3238 ifm->ifm_media = mtmp; 3239 } 3240 3241 ifp->if_flags = itmp; 3242 ifp->if_timer = 0; 3243 3244 sc->bce_link = 0; 3245 3246 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 3247 3248 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3249 3250 bce_mgmt_init_locked(sc); 3251} 3252 3253 3254static int 3255bce_reset(struct bce_softc *sc, u32 reset_code) 3256{ 3257 u32 val; 3258 int i, rc = 0; 3259 3260 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3261 3262 /* Wait for pending PCI transactions to complete. */ 3263 REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS, 3264 BCE_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE | 3265 BCE_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE | 3266 BCE_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE | 3267 BCE_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE); 3268 val = REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS); 3269 DELAY(5); 3270 3271 /* Assume bootcode is running. */ 3272 sc->bce_fw_timed_out = 0; 3273 3274 /* Give the firmware a chance to prepare for the reset. */ 3275 rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT0 | reset_code); 3276 if (rc) 3277 goto bce_reset_exit; 3278 3279 /* Set a firmware reminder that this is a soft reset. */ 3280 REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_RESET_SIGNATURE, 3281 BCE_DRV_RESET_SIGNATURE_MAGIC); 3282 3283 /* Dummy read to force the chip to complete all current transactions. */ 3284 val = REG_RD(sc, BCE_MISC_ID); 3285 3286 /* Chip reset. */ 3287 val = BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ | 3288 BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | 3289 BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; 3290 REG_WR(sc, BCE_PCICFG_MISC_CONFIG, val); 3291 3292 /* Allow up to 30us for reset to complete. */ 3293 for (i = 0; i < 10; i++) { 3294 val = REG_RD(sc, BCE_PCICFG_MISC_CONFIG); 3295 if ((val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ | 3296 BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) { 3297 break; 3298 } 3299 DELAY(10); 3300 } 3301 3302 /* Check that reset completed successfully. */ 3303 if (val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ | 3304 BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { 3305 BCE_PRINTF(sc, "%s(%d): Reset failed!\n", 3306 __FILE__, __LINE__); 3307 rc = EBUSY; 3308 goto bce_reset_exit; 3309 } 3310 3311 /* Make sure byte swapping is properly configured. */ 3312 val = REG_RD(sc, BCE_PCI_SWAP_DIAG0); 3313 if (val != 0x01020304) { 3314 BCE_PRINTF(sc, "%s(%d): Byte swap is incorrect!\n", 3315 __FILE__, __LINE__); 3316 rc = ENODEV; 3317 goto bce_reset_exit; 3318 } 3319 3320 /* Just completed a reset, assume that firmware is running again. */ 3321 sc->bce_fw_timed_out = 0; 3322 3323 /* Wait for the firmware to finish its initialization. */ 3324 rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT1 | reset_code); 3325 if (rc) 3326 BCE_PRINTF(sc, "%s(%d): Firmware did not complete initialization!\n", 3327 __FILE__, __LINE__); 3328 3329bce_reset_exit: 3330 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3331 3332 return (rc); 3333} 3334 3335 3336static int 3337bce_chipinit(struct bce_softc *sc) 3338{ 3339 u32 val; 3340 int rc = 0; 3341 3342 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3343 3344 /* Make sure the interrupt is not active. */ 3345 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, BCE_PCICFG_INT_ACK_CMD_MASK_INT); 3346 3347 /* Initialize DMA byte/word swapping, configure the number of DMA */ 3348 /* channels and PCI clock compensation delay. */ 3349 val = BCE_DMA_CONFIG_DATA_BYTE_SWAP | 3350 BCE_DMA_CONFIG_DATA_WORD_SWAP | 3351#if BYTE_ORDER == BIG_ENDIAN 3352 BCE_DMA_CONFIG_CNTL_BYTE_SWAP | 3353#endif 3354 BCE_DMA_CONFIG_CNTL_WORD_SWAP | 3355 DMA_READ_CHANS << 12 | 3356 DMA_WRITE_CHANS << 16; 3357 3358 val |= (0x2 << 20) | BCE_DMA_CONFIG_CNTL_PCI_COMP_DLY; 3359 3360 if ((sc->bce_flags & BCE_PCIX_FLAG) && (sc->bus_speed_mhz == 133)) 3361 val |= BCE_DMA_CONFIG_PCI_FAST_CLK_CMP; 3362 3363 /* 3364 * This setting resolves a problem observed on certain Intel PCI 3365 * chipsets that cannot handle multiple outstanding DMA operations. 3366 * See errata E9_5706A1_65. 3367 */ 3368 if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) && 3369 (BCE_CHIP_ID(sc) != BCE_CHIP_ID_5706_A0) && 3370 !(sc->bce_flags & BCE_PCIX_FLAG)) 3371 val |= BCE_DMA_CONFIG_CNTL_PING_PONG_DMA; 3372 3373 REG_WR(sc, BCE_DMA_CONFIG, val); 3374 3375 /* Clear the PCI-X relaxed ordering bit. See errata E3_5708CA0_570. */ 3376 if (sc->bce_flags & BCE_PCIX_FLAG) { 3377 u16 val; 3378 3379 val = pci_read_config(sc->bce_dev, BCE_PCI_PCIX_CMD, 2); 3380 pci_write_config(sc->bce_dev, BCE_PCI_PCIX_CMD, val & ~0x2, 2); 3381 } 3382 3383 /* Enable the RX_V2P and Context state machines before access. */ 3384 REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, 3385 BCE_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE | 3386 BCE_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE | 3387 BCE_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE); 3388 3389 /* Initialize context mapping and zero out the quick contexts. */ 3390 bce_init_context(sc); 3391 3392 /* Initialize the on-boards CPUs */ 3393 bce_init_cpus(sc); 3394 3395 /* Prepare NVRAM for access. */ 3396 if (bce_init_nvram(sc)) { 3397 rc = ENODEV; 3398 goto bce_chipinit_exit; 3399 } 3400 3401 /* Set the kernel bypass block size */ 3402 val = REG_RD(sc, BCE_MQ_CONFIG); 3403 val &= ~BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE; 3404 val |= BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE_256; 3405 REG_WR(sc, BCE_MQ_CONFIG, val); 3406 3407 val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE); 3408 REG_WR(sc, BCE_MQ_KNL_BYP_WIND_START, val); 3409 REG_WR(sc, BCE_MQ_KNL_WIND_END, val); 3410 3411 val = (BCM_PAGE_BITS - 8) << 24; 3412 REG_WR(sc, BCE_RV2P_CONFIG, val); 3413 3414 /* Configure page size. */ 3415 val = REG_RD(sc, BCE_TBDR_CONFIG); 3416 val &= ~BCE_TBDR_CONFIG_PAGE_SIZE; 3417 val |= (BCM_PAGE_BITS - 8) << 24 | 0x40; 3418 REG_WR(sc, BCE_TBDR_CONFIG, val); 3419 3420bce_chipinit_exit: 3421 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3422 3423 return(rc); 3424} 3425 3426 3427/****************************************************************************/ 3428/* Initialize the controller in preparation to send/receive traffic. */ 3429/* */ 3430/* Returns: */ 3431/* 0 for success, positive value for failure. */ 3432/****************************************************************************/ 3433static int 3434bce_blockinit(struct bce_softc *sc) 3435{ 3436 u32 reg, val; 3437 int rc = 0; 3438 3439 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3440 3441 /* Load the hardware default MAC address. */ 3442 bce_set_mac_addr(sc); 3443 3444 /* Set the Ethernet backoff seed value */ 3445 val = sc->eaddr[0] + (sc->eaddr[1] << 8) + 3446 (sc->eaddr[2] << 16) + (sc->eaddr[3] ) + 3447 (sc->eaddr[4] << 8) + (sc->eaddr[5] << 16); 3448 REG_WR(sc, BCE_EMAC_BACKOFF_SEED, val); 3449 3450 sc->last_status_idx = 0; 3451 sc->rx_mode = BCE_EMAC_RX_MODE_SORT_MODE; 3452 3453 /* Set up link change interrupt generation. */ 3454 REG_WR(sc, BCE_EMAC_ATTENTION_ENA, BCE_EMAC_ATTENTION_ENA_LINK); 3455 3456 /* Program the physical address of the status block. */ 3457 REG_WR(sc, BCE_HC_STATUS_ADDR_L, 3458 BCE_ADDR_LO(sc->status_block_paddr)); 3459 REG_WR(sc, BCE_HC_STATUS_ADDR_H, 3460 BCE_ADDR_HI(sc->status_block_paddr)); 3461 3462 /* Program the physical address of the statistics block. */ 3463 REG_WR(sc, BCE_HC_STATISTICS_ADDR_L, 3464 BCE_ADDR_LO(sc->stats_block_paddr)); 3465 REG_WR(sc, BCE_HC_STATISTICS_ADDR_H, 3466 BCE_ADDR_HI(sc->stats_block_paddr)); 3467 3468 /* Program various host coalescing parameters. */ 3469 REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP, 3470 (sc->bce_tx_quick_cons_trip_int << 16) | sc->bce_tx_quick_cons_trip); 3471 REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP, 3472 (sc->bce_rx_quick_cons_trip_int << 16) | sc->bce_rx_quick_cons_trip); 3473 REG_WR(sc, BCE_HC_COMP_PROD_TRIP, 3474 (sc->bce_comp_prod_trip_int << 16) | sc->bce_comp_prod_trip); 3475 REG_WR(sc, BCE_HC_TX_TICKS, 3476 (sc->bce_tx_ticks_int << 16) | sc->bce_tx_ticks); 3477 REG_WR(sc, BCE_HC_RX_TICKS, 3478 (sc->bce_rx_ticks_int << 16) | sc->bce_rx_ticks); 3479 REG_WR(sc, BCE_HC_COM_TICKS, 3480 (sc->bce_com_ticks_int << 16) | sc->bce_com_ticks); 3481 REG_WR(sc, BCE_HC_CMD_TICKS, 3482 (sc->bce_cmd_ticks_int << 16) | sc->bce_cmd_ticks); 3483 REG_WR(sc, BCE_HC_STATS_TICKS, 3484 (sc->bce_stats_ticks & 0xffff00)); 3485 REG_WR(sc, BCE_HC_STAT_COLLECT_TICKS, 3486 0xbb8); /* 3ms */ 3487 REG_WR(sc, BCE_HC_CONFIG, 3488 (BCE_HC_CONFIG_RX_TMR_MODE | BCE_HC_CONFIG_TX_TMR_MODE | 3489 BCE_HC_CONFIG_COLLECT_STATS)); 3490 3491 /* Clear the internal statistics counters. */ 3492 REG_WR(sc, BCE_HC_COMMAND, BCE_HC_COMMAND_CLR_STAT_NOW); 3493 3494 /* Verify that bootcode is running. */ 3495 reg = REG_RD_IND(sc, sc->bce_shmem_base + BCE_DEV_INFO_SIGNATURE); 3496 3497 DBRUNIF(DB_RANDOMTRUE(bce_debug_bootcode_running_failure), 3498 BCE_PRINTF(sc, "%s(%d): Simulating bootcode failure.\n", 3499 __FILE__, __LINE__); 3500 reg = 0); 3501 3502 if ((reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK) != 3503 BCE_DEV_INFO_SIGNATURE_MAGIC) { 3504 BCE_PRINTF(sc, "%s(%d): Bootcode not running! Found: 0x%08X, " 3505 "Expected: 08%08X\n", __FILE__, __LINE__, 3506 (reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK), 3507 BCE_DEV_INFO_SIGNATURE_MAGIC); 3508 rc = ENODEV; 3509 goto bce_blockinit_exit; 3510 } 3511 3512 /* Check if any management firmware is running. */ 3513 reg = REG_RD_IND(sc, sc->bce_shmem_base + BCE_PORT_FEATURE); 3514 if (reg & (BCE_PORT_FEATURE_ASF_ENABLED | BCE_PORT_FEATURE_IMD_ENABLED)) { 3515 DBPRINT(sc, BCE_INFO, "Management F/W Enabled.\n"); 3516 sc->bce_flags |= BCE_MFW_ENABLE_FLAG; 3517 } 3518 3519 sc->bce_fw_ver = REG_RD_IND(sc, sc->bce_shmem_base + BCE_DEV_INFO_BC_REV); 3520 DBPRINT(sc, BCE_INFO, "bootcode rev = 0x%08X\n", sc->bce_fw_ver); 3521 3522 /* Allow bootcode to apply any additional fixes before enabling MAC. */ 3523 rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT2 | BCE_DRV_MSG_CODE_RESET); 3524 3525 /* Enable link state change interrupt generation. */ 3526 REG_WR(sc, BCE_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE); 3527 3528 /* Enable all remaining blocks in the MAC. */ 3529 REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, 0x5ffffff); 3530 REG_RD(sc, BCE_MISC_ENABLE_SET_BITS); 3531 DELAY(20); 3532 3533bce_blockinit_exit: 3534 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3535 3536 return (rc); 3537} 3538 3539 3540/****************************************************************************/ 3541/* Encapsulate an mbuf cluster into the rx_bd chain. */ 3542/* */ 3543/* The NetXtreme II can support Jumbo frames by using multiple rx_bd's. */ 3544/* This routine will map an mbuf cluster into 1 or more rx_bd's as */ 3545/* necessary. */ 3546/* */ 3547/* Returns: */ 3548/* 0 for success, positive value for failure. */ 3549/****************************************************************************/ 3550static int 3551bce_get_buf(struct bce_softc *sc, struct mbuf *m, u16 *prod, u16 *chain_prod, 3552 u32 *prod_bseq) 3553{ 3554 bus_dmamap_t map; 3555 bus_dma_segment_t segs[4]; 3556 struct mbuf *m_new = NULL; 3557 struct rx_bd *rxbd; 3558 int i, nsegs, error, rc = 0; 3559#ifdef BCE_DEBUG 3560 u16 debug_chain_prod = *chain_prod; 3561#endif 3562 3563 DBPRINT(sc, (BCE_VERBOSE_RESET | BCE_VERBOSE_RECV), "Entering %s()\n", 3564 __FUNCTION__); 3565 3566 /* Make sure the inputs are valid. */ 3567 DBRUNIF((*chain_prod > MAX_RX_BD), 3568 BCE_PRINTF(sc, "%s(%d): RX producer out of range: 0x%04X > 0x%04X\n", 3569 __FILE__, __LINE__, *chain_prod, (u16) MAX_RX_BD)); 3570 3571 DBPRINT(sc, BCE_VERBOSE_RECV, "%s(enter): prod = 0x%04X, chain_prod = 0x%04X, " 3572 "prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod, *prod_bseq); 3573 3574 if (m == NULL) { 3575 3576 DBRUNIF(DB_RANDOMTRUE(bce_debug_mbuf_allocation_failure), 3577 BCE_PRINTF(sc, "%s(%d): Simulating mbuf allocation failure.\n", 3578 __FILE__, __LINE__); 3579 sc->mbuf_alloc_failed++; 3580 rc = ENOBUFS; 3581 goto bce_get_buf_exit); 3582 3583 /* This is a new mbuf allocation. */ 3584 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 3585 if (m_new == NULL) { 3586 3587 DBPRINT(sc, BCE_WARN, "%s(%d): RX mbuf header allocation failed!\n", 3588 __FILE__, __LINE__); 3589 3590 DBRUNIF(1, sc->mbuf_alloc_failed++); 3591 3592 rc = ENOBUFS; 3593 goto bce_get_buf_exit; 3594 } 3595 3596 DBRUNIF(1, sc->rx_mbuf_alloc++); 3597 m_cljget(m_new, M_DONTWAIT, sc->mbuf_alloc_size); 3598 if (!(m_new->m_flags & M_EXT)) { 3599 3600 DBPRINT(sc, BCE_WARN, "%s(%d): RX mbuf chain allocation failed!\n", 3601 __FILE__, __LINE__); 3602 3603 m_freem(m_new); 3604 3605 DBRUNIF(1, sc->rx_mbuf_alloc--); 3606 DBRUNIF(1, sc->mbuf_alloc_failed++); 3607 3608 rc = ENOBUFS; 3609 goto bce_get_buf_exit; 3610 } 3611 3612 m_new->m_len = m_new->m_pkthdr.len = sc->mbuf_alloc_size; 3613 } else { 3614 m_new = m; 3615 m_new->m_len = m_new->m_pkthdr.len = sc->mbuf_alloc_size; 3616 m_new->m_data = m_new->m_ext.ext_buf; 3617 } 3618 3619 /* Map the mbuf cluster into device memory. */ 3620 map = sc->rx_mbuf_map[*chain_prod]; 3621 error = bus_dmamap_load_mbuf_sg(sc->rx_mbuf_tag, map, m_new, 3622 segs, &nsegs, BUS_DMA_NOWAIT); 3623 3624 if (error) { 3625 BCE_PRINTF(sc, "%s(%d): Error mapping mbuf into RX chain!\n", 3626 __FILE__, __LINE__); 3627 3628 m_freem(m_new); 3629 3630 DBRUNIF(1, sc->rx_mbuf_alloc--); 3631 3632 rc = ENOBUFS; 3633 goto bce_get_buf_exit; 3634 } 3635 3636 /* Watch for overflow. */ 3637 DBRUNIF((sc->free_rx_bd > USABLE_RX_BD), 3638 BCE_PRINTF(sc, "%s(%d): Too many free rx_bd (0x%04X > 0x%04X)!\n", 3639 __FILE__, __LINE__, sc->free_rx_bd, (u16) USABLE_RX_BD)); 3640 3641 DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark), 3642 sc->rx_low_watermark = sc->free_rx_bd); 3643 3644 /* Setup the rx_bd for the first segment. */ 3645 rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)]; 3646 3647 rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[0].ds_addr)); 3648 rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[0].ds_addr)); 3649 rxbd->rx_bd_len = htole32(segs[0].ds_len); 3650 rxbd->rx_bd_flags = htole32(RX_BD_FLAGS_START); 3651 *prod_bseq += segs[0].ds_len; 3652 3653 for (i = 1; i < nsegs; i++) { 3654 3655 *prod = NEXT_RX_BD(*prod); 3656 *chain_prod = RX_CHAIN_IDX(*prod); 3657 3658 rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)]; 3659 3660 rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr)); 3661 rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr)); 3662 rxbd->rx_bd_len = htole32(segs[i].ds_len); 3663 rxbd->rx_bd_flags = 0; 3664 *prod_bseq += segs[i].ds_len; 3665 } 3666 3667 rxbd->rx_bd_flags |= htole32(RX_BD_FLAGS_END); 3668 3669 /* Save the mbuf and update our counter. */ 3670 sc->rx_mbuf_ptr[*chain_prod] = m_new; 3671 sc->free_rx_bd -= nsegs; 3672 3673 DBRUN(BCE_VERBOSE_RECV, bce_dump_rx_mbuf_chain(sc, debug_chain_prod, 3674 nsegs)); 3675 3676 DBPRINT(sc, BCE_VERBOSE_RECV, "%s(exit): prod = 0x%04X, chain_prod = 0x%04X, " 3677 "prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod, *prod_bseq); 3678 3679bce_get_buf_exit: 3680 DBPRINT(sc, (BCE_VERBOSE_RESET | BCE_VERBOSE_RECV), "Exiting %s()\n", 3681 __FUNCTION__); 3682 3683 return(rc); 3684} 3685 3686 3687/****************************************************************************/ 3688/* Allocate memory and initialize the TX data structures. */ 3689/* */ 3690/* Returns: */ 3691/* 0 for success, positive value for failure. */ 3692/****************************************************************************/ 3693static int 3694bce_init_tx_chain(struct bce_softc *sc) 3695{ 3696 struct tx_bd *txbd; 3697 u32 val; 3698 int i, rc = 0; 3699 3700 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3701 3702 /* Set the initial TX producer/consumer indices. */ 3703 sc->tx_prod = 0; 3704 sc->tx_cons = 0; 3705 sc->tx_prod_bseq = 0; 3706 sc->used_tx_bd = 0; 3707 DBRUNIF(1, sc->tx_hi_watermark = USABLE_TX_BD); 3708 3709 /* 3710 * The NetXtreme II supports a linked-list structre called 3711 * a Buffer Descriptor Chain (or BD chain). A BD chain 3712 * consists of a series of 1 or more chain pages, each of which 3713 * consists of a fixed number of BD entries. 3714 * The last BD entry on each page is a pointer to the next page 3715 * in the chain, and the last pointer in the BD chain 3716 * points back to the beginning of the chain. 3717 */ 3718 3719 /* Set the TX next pointer chain entries. */ 3720 for (i = 0; i < TX_PAGES; i++) { 3721 int j; 3722 3723 txbd = &sc->tx_bd_chain[i][USABLE_TX_BD_PER_PAGE]; 3724 3725 /* Check if we've reached the last page. */ 3726 if (i == (TX_PAGES - 1)) 3727 j = 0; 3728 else 3729 j = i + 1; 3730 3731 txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->tx_bd_chain_paddr[j])); 3732 txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->tx_bd_chain_paddr[j])); 3733 } 3734 3735 /* 3736 * Initialize the context ID for an L2 TX chain. 3737 */ 3738 val = BCE_L2CTX_TYPE_TYPE_L2; 3739 val |= BCE_L2CTX_TYPE_SIZE_L2; 3740 CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TYPE, val); 3741 3742 val = BCE_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16); 3743 CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_CMD_TYPE, val); 3744 3745 /* Point the hardware to the first page in the chain. */ 3746 val = BCE_ADDR_HI(sc->tx_bd_chain_paddr[0]); 3747 CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TBDR_BHADDR_HI, val); 3748 val = BCE_ADDR_LO(sc->tx_bd_chain_paddr[0]); 3749 CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TBDR_BHADDR_LO, val); 3750 3751 DBRUN(BCE_VERBOSE_SEND, bce_dump_tx_chain(sc, 0, TOTAL_TX_BD)); 3752 3753 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3754 3755 return(rc); 3756} 3757 3758 3759/****************************************************************************/ 3760/* Free memory and clear the TX data structures. */ 3761/* */ 3762/* Returns: */ 3763/* Nothing. */ 3764/****************************************************************************/ 3765static void 3766bce_free_tx_chain(struct bce_softc *sc) 3767{ 3768 int i; 3769 3770 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3771 3772 /* Unmap, unload, and free any mbufs still in the TX mbuf chain. */ 3773 for (i = 0; i < TOTAL_TX_BD; i++) { 3774 if (sc->tx_mbuf_ptr[i] != NULL) { 3775 if (sc->tx_mbuf_map != NULL) 3776 bus_dmamap_sync(sc->tx_mbuf_tag, sc->tx_mbuf_map[i], 3777 BUS_DMASYNC_POSTWRITE); 3778 m_freem(sc->tx_mbuf_ptr[i]); 3779 sc->tx_mbuf_ptr[i] = NULL; 3780 DBRUNIF(1, sc->tx_mbuf_alloc--); 3781 } 3782 } 3783 3784 /* Clear each TX chain page. */ 3785 for (i = 0; i < TX_PAGES; i++) 3786 bzero((char *)sc->tx_bd_chain[i], BCE_TX_CHAIN_PAGE_SZ); 3787 3788 /* Check if we lost any mbufs in the process. */ 3789 DBRUNIF((sc->tx_mbuf_alloc), 3790 BCE_PRINTF(sc, "%s(%d): Memory leak! Lost %d mbufs " 3791 "from tx chain!\n", 3792 __FILE__, __LINE__, sc->tx_mbuf_alloc)); 3793 3794 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3795} 3796 3797 3798/****************************************************************************/ 3799/* Allocate memory and initialize the RX data structures. */ 3800/* */ 3801/* Returns: */ 3802/* 0 for success, positive value for failure. */ 3803/****************************************************************************/ 3804static int 3805bce_init_rx_chain(struct bce_softc *sc) 3806{ 3807 struct rx_bd *rxbd; 3808 int i, rc = 0; 3809 u16 prod, chain_prod; 3810 u32 prod_bseq, val; 3811 3812 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3813 3814 /* Initialize the RX producer and consumer indices. */ 3815 sc->rx_prod = 0; 3816 sc->rx_cons = 0; 3817 sc->rx_prod_bseq = 0; 3818 sc->free_rx_bd = BCE_RX_SLACK_SPACE; 3819 DBRUNIF(1, sc->rx_low_watermark = USABLE_RX_BD); 3820 3821 /* Initialize the RX next pointer chain entries. */ 3822 for (i = 0; i < RX_PAGES; i++) { 3823 int j; 3824 3825 rxbd = &sc->rx_bd_chain[i][USABLE_RX_BD_PER_PAGE]; 3826 3827 /* Check if we've reached the last page. */ 3828 if (i == (RX_PAGES - 1)) 3829 j = 0; 3830 else 3831 j = i + 1; 3832 3833 /* Setup the chain page pointers. */ 3834 rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->rx_bd_chain_paddr[j])); 3835 rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->rx_bd_chain_paddr[j])); 3836 } 3837 3838 /* Initialize the context ID for an L2 RX chain. */ 3839 val = BCE_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE; 3840 val |= BCE_L2CTX_CTX_TYPE_SIZE_L2; 3841 val |= 0x02 << 8; 3842 CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_CTX_TYPE, val); 3843 3844 /* Point the hardware to the first page in the chain. */ 3845 val = BCE_ADDR_HI(sc->rx_bd_chain_paddr[0]); 3846 CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_NX_BDHADDR_HI, val); 3847 val = BCE_ADDR_LO(sc->rx_bd_chain_paddr[0]); 3848 CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_NX_BDHADDR_LO, val); 3849 3850 /* Allocate mbuf clusters for the rx_bd chain. */ 3851 prod = prod_bseq = 0; 3852 while (prod < BCE_RX_SLACK_SPACE) { 3853 chain_prod = RX_CHAIN_IDX(prod); 3854 if (bce_get_buf(sc, NULL, &prod, &chain_prod, &prod_bseq)) { 3855 BCE_PRINTF(sc, "%s(%d): Error filling RX chain: rx_bd[0x%04X]!\n", 3856 __FILE__, __LINE__, chain_prod); 3857 rc = ENOBUFS; 3858 break; 3859 } 3860 prod = NEXT_RX_BD(prod); 3861 } 3862 3863 /* Save the RX chain producer index. */ 3864 sc->rx_prod = prod; 3865 sc->rx_prod_bseq = prod_bseq; 3866 3867 for (i = 0; i < RX_PAGES; i++) { 3868 bus_dmamap_sync( 3869 sc->rx_bd_chain_tag, 3870 sc->rx_bd_chain_map[i], 3871 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3872 } 3873 3874 /* Tell the chip about the waiting rx_bd's. */ 3875 REG_WR16(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BDIDX, sc->rx_prod); 3876 REG_WR(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BSEQ, sc->rx_prod_bseq); 3877 3878 DBRUN(BCE_VERBOSE_RECV, bce_dump_rx_chain(sc, 0, TOTAL_RX_BD)); 3879 3880 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3881 3882 return(rc); 3883} 3884 3885 3886/****************************************************************************/ 3887/* Free memory and clear the RX data structures. */ 3888/* */ 3889/* Returns: */ 3890/* Nothing. */ 3891/****************************************************************************/ 3892static void 3893bce_free_rx_chain(struct bce_softc *sc) 3894{ 3895 int i; 3896 3897 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 3898 3899 /* Free any mbufs still in the RX mbuf chain. */ 3900 for (i = 0; i < TOTAL_RX_BD; i++) { 3901 if (sc->rx_mbuf_ptr[i] != NULL) { 3902 if (sc->rx_mbuf_map[i] != NULL) 3903 bus_dmamap_sync(sc->rx_mbuf_tag, sc->rx_mbuf_map[i], 3904 BUS_DMASYNC_POSTREAD); 3905 m_freem(sc->rx_mbuf_ptr[i]); 3906 sc->rx_mbuf_ptr[i] = NULL; 3907 DBRUNIF(1, sc->rx_mbuf_alloc--); 3908 } 3909 } 3910 3911 /* Clear each RX chain page. */ 3912 for (i = 0; i < RX_PAGES; i++) 3913 bzero((char *)sc->rx_bd_chain[i], BCE_RX_CHAIN_PAGE_SZ); 3914 3915 /* Check if we lost any mbufs in the process. */ 3916 DBRUNIF((sc->rx_mbuf_alloc), 3917 BCE_PRINTF(sc, "%s(%d): Memory leak! Lost %d mbufs from rx chain!\n", 3918 __FILE__, __LINE__, sc->rx_mbuf_alloc)); 3919 3920 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 3921} 3922 3923 3924/****************************************************************************/ 3925/* Set media options. */ 3926/* */ 3927/* Returns: */ 3928/* 0 for success, positive value for failure. */ 3929/****************************************************************************/ 3930static int 3931bce_ifmedia_upd(struct ifnet *ifp) 3932{ 3933 struct bce_softc *sc; 3934 struct mii_data *mii; 3935 struct ifmedia *ifm; 3936 int rc = 0; 3937 3938 sc = ifp->if_softc; 3939 ifm = &sc->bce_ifmedia; 3940 3941 /* DRC - ToDo: Add SerDes support. */ 3942 3943 mii = device_get_softc(sc->bce_miibus); 3944 sc->bce_link = 0; 3945 if (mii->mii_instance) { 3946 struct mii_softc *miisc; 3947 for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL; 3948 miisc = LIST_NEXT(miisc, mii_list)) 3949 mii_phy_reset(miisc); 3950 } 3951 mii_mediachg(mii); 3952 3953 return(rc); 3954} 3955 3956 3957/****************************************************************************/ 3958/* Reports current media status. */ 3959/* */ 3960/* Returns: */ 3961/* Nothing. */ 3962/****************************************************************************/ 3963static void 3964bce_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 3965{ 3966 struct bce_softc *sc; 3967 struct mii_data *mii; 3968 3969 sc = ifp->if_softc; 3970 3971 BCE_LOCK(sc); 3972 3973 mii = device_get_softc(sc->bce_miibus); 3974 3975 /* DRC - ToDo: Add SerDes support. */ 3976 3977 mii_pollstat(mii); 3978 ifmr->ifm_active = mii->mii_media_active; 3979 ifmr->ifm_status = mii->mii_media_status; 3980 3981 BCE_UNLOCK(sc); 3982} 3983 3984 3985/****************************************************************************/ 3986/* Handles PHY generated interrupt events. */ 3987/* */ 3988/* Returns: */ 3989/* Nothing. */ 3990/****************************************************************************/ 3991static void 3992bce_phy_intr(struct bce_softc *sc) 3993{ 3994 u32 new_link_state, old_link_state; 3995 3996 new_link_state = sc->status_block->status_attn_bits & 3997 STATUS_ATTN_BITS_LINK_STATE; 3998 old_link_state = sc->status_block->status_attn_bits_ack & 3999 STATUS_ATTN_BITS_LINK_STATE; 4000 4001 /* Handle any changes if the link state has changed. */ 4002 if (new_link_state != old_link_state) { 4003 4004 DBRUN(BCE_VERBOSE_INTR, bce_dump_status_block(sc)); 4005 4006 sc->bce_link = 0; 4007 callout_stop(&sc->bce_stat_ch); 4008 bce_tick_locked(sc); 4009 4010 /* Update the status_attn_bits_ack field in the status block. */ 4011 if (new_link_state) { 4012 REG_WR(sc, BCE_PCICFG_STATUS_BIT_SET_CMD, 4013 STATUS_ATTN_BITS_LINK_STATE); 4014 DBPRINT(sc, BCE_INFO, "Link is now UP.\n"); 4015 } 4016 else { 4017 REG_WR(sc, BCE_PCICFG_STATUS_BIT_CLEAR_CMD, 4018 STATUS_ATTN_BITS_LINK_STATE); 4019 DBPRINT(sc, BCE_INFO, "Link is now DOWN.\n"); 4020 } 4021 4022 } 4023 4024 /* Acknowledge the link change interrupt. */ 4025 REG_WR(sc, BCE_EMAC_STATUS, BCE_EMAC_STATUS_LINK_CHANGE); 4026} 4027 4028 4029/****************************************************************************/ 4030/* Handles received frame interrupt events. */ 4031/* */ 4032/* Returns: */ 4033/* Nothing. */ 4034/****************************************************************************/ 4035static void 4036bce_rx_intr(struct bce_softc *sc) 4037{ 4038 struct status_block *sblk = sc->status_block; 4039 struct ifnet *ifp = sc->bce_ifp; 4040 u16 hw_cons, sw_cons, sw_chain_cons, sw_prod, sw_chain_prod; 4041 u32 sw_prod_bseq; 4042 struct l2_fhdr *l2fhdr; 4043 4044 DBRUNIF(1, sc->rx_interrupts++); 4045 4046 /* Prepare the RX chain pages to be accessed by the host CPU. */ 4047 for (int i = 0; i < RX_PAGES; i++) 4048 bus_dmamap_sync(sc->rx_bd_chain_tag, 4049 sc->rx_bd_chain_map[i], BUS_DMASYNC_POSTWRITE); 4050 4051 /* Get the hardware's view of the RX consumer index. */ 4052 hw_cons = sc->hw_rx_cons = sblk->status_rx_quick_consumer_index0; 4053 if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE) 4054 hw_cons++; 4055 4056 /* Get working copies of the driver's view of the RX indices. */ 4057 sw_cons = sc->rx_cons; 4058 sw_prod = sc->rx_prod; 4059 sw_prod_bseq = sc->rx_prod_bseq; 4060 4061 DBPRINT(sc, BCE_INFO_RECV, "%s(enter): sw_prod = 0x%04X, " 4062 "sw_cons = 0x%04X, sw_prod_bseq = 0x%08X\n", 4063 __FUNCTION__, sw_prod, sw_cons, 4064 sw_prod_bseq); 4065 4066 /* Prevent speculative reads from getting ahead of the status block. */ 4067 bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0, 4068 BUS_SPACE_BARRIER_READ); 4069 4070 DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark), 4071 sc->rx_low_watermark = sc->free_rx_bd); 4072 4073 /* 4074 * Scan through the receive chain as long 4075 * as there is work to do. 4076 */ 4077 while (sw_cons != hw_cons) { 4078 struct mbuf *m; 4079 struct rx_bd *rxbd; 4080 unsigned int len; 4081 u32 status; 4082 4083 /* Convert the producer/consumer indices to an actual rx_bd index. */ 4084 sw_chain_cons = RX_CHAIN_IDX(sw_cons); 4085 sw_chain_prod = RX_CHAIN_IDX(sw_prod); 4086 4087 /* Get the used rx_bd. */ 4088 rxbd = &sc->rx_bd_chain[RX_PAGE(sw_chain_cons)][RX_IDX(sw_chain_cons)]; 4089 sc->free_rx_bd++; 4090 4091 DBRUN(BCE_VERBOSE_RECV, 4092 BCE_PRINTF(sc, "%s(): ", __FUNCTION__); 4093 bce_dump_rxbd(sc, sw_chain_cons, rxbd)); 4094 4095#ifdef DEVICE_POLLING 4096 if (ifp->if_capenable & IFCAP_POLLING) { 4097 if (sc->bce_rxcycles <= 0) 4098 break; 4099 sc->bce_rxcycles--; 4100 } 4101#endif 4102 4103 /* The mbuf is stored with the last rx_bd entry of a packet. */ 4104 if (sc->rx_mbuf_ptr[sw_chain_cons] != NULL) { 4105 4106 /* Validate that this is the last rx_bd. */ 4107 DBRUNIF((!(rxbd->rx_bd_flags & RX_BD_FLAGS_END)), 4108 BCE_PRINTF(sc, "%s(%d): Unexpected mbuf found in rx_bd[0x%04X]!\n", 4109 __FILE__, __LINE__, sw_chain_cons); 4110 bce_breakpoint(sc)); 4111 4112 /* DRC - ToDo: If the received packet is small, say less */ 4113 /* than 128 bytes, allocate a new mbuf here, */ 4114 /* copy the data to that mbuf, and recycle */ 4115 /* the mapped jumbo frame. */ 4116 4117 /* Unmap the mbuf from DMA space. */ 4118 bus_dmamap_sync(sc->rx_mbuf_tag, 4119 sc->rx_mbuf_map[sw_chain_cons], 4120 BUS_DMASYNC_POSTREAD); 4121 bus_dmamap_unload(sc->rx_mbuf_tag, 4122 sc->rx_mbuf_map[sw_chain_cons]); 4123 4124 /* Remove the mbuf from the driver's chain. */ 4125 m = sc->rx_mbuf_ptr[sw_chain_cons]; 4126 sc->rx_mbuf_ptr[sw_chain_cons] = NULL; 4127 4128 /* 4129 * Frames received on the NetXteme II are prepended 4130 * with the l2_fhdr structure which provides status 4131 * information about the received frame (including 4132 * VLAN tags and checksum info) and are also 4133 * automatically adjusted to align the IP header 4134 * (i.e. two null bytes are inserted before the 4135 * Ethernet header). 4136 */ 4137 l2fhdr = mtod(m, struct l2_fhdr *); 4138 4139 len = l2fhdr->l2_fhdr_pkt_len; 4140 status = l2fhdr->l2_fhdr_status; 4141 4142 DBRUNIF(DB_RANDOMTRUE(bce_debug_l2fhdr_status_check), 4143 BCE_PRINTF(sc, "Simulating l2_fhdr status error.\n"); 4144 status = status | L2_FHDR_ERRORS_PHY_DECODE); 4145 4146 /* Watch for unusual sized frames. */ 4147 DBRUNIF(((len < BCE_MIN_MTU) || (len > BCE_MAX_JUMBO_ETHER_MTU_VLAN)), 4148 BCE_PRINTF(sc, "%s(%d): Unusual frame size found. " 4149 "Min(%d), Actual(%d), Max(%d)\n", 4150 __FILE__, __LINE__, (int) BCE_MIN_MTU, 4151 len, (int) BCE_MAX_JUMBO_ETHER_MTU_VLAN); 4152 bce_dump_mbuf(sc, m); 4153 bce_breakpoint(sc)); 4154 4155 len -= ETHER_CRC_LEN; 4156 4157 /* Check the received frame for errors. */ 4158 if (status & (L2_FHDR_ERRORS_BAD_CRC | 4159 L2_FHDR_ERRORS_PHY_DECODE | L2_FHDR_ERRORS_ALIGNMENT | 4160 L2_FHDR_ERRORS_TOO_SHORT | L2_FHDR_ERRORS_GIANT_FRAME)) { 4161 4162 ifp->if_ierrors++; 4163 DBRUNIF(1, sc->l2fhdr_status_errors++); 4164 4165 /* Reuse the mbuf for a new frame. */ 4166 if (bce_get_buf(sc, m, &sw_prod, &sw_chain_prod, &sw_prod_bseq)) { 4167 4168 DBRUNIF(1, bce_breakpoint(sc)); 4169 panic("bce%d: Can't reuse RX mbuf!\n", sc->bce_unit); 4170 4171 } 4172 goto bce_rx_int_next_rx; 4173 } 4174 4175 /* 4176 * Get a new mbuf for the rx_bd. If no new 4177 * mbufs are available then reuse the current mbuf, 4178 * log an ierror on the interface, and generate 4179 * an error in the system log. 4180 */ 4181 if (bce_get_buf(sc, NULL, &sw_prod, &sw_chain_prod, &sw_prod_bseq)) { 4182 4183 DBRUN(BCE_WARN, 4184 BCE_PRINTF(sc, "%s(%d): Failed to allocate " 4185 "new mbuf, incoming frame dropped!\n", 4186 __FILE__, __LINE__)); 4187 4188 ifp->if_ierrors++; 4189 4190 /* Try and reuse the exisitng mbuf. */ 4191 if (bce_get_buf(sc, m, &sw_prod, &sw_chain_prod, &sw_prod_bseq)) { 4192 4193 DBRUNIF(1, bce_breakpoint(sc)); 4194 panic("bce%d: Double mbuf allocation failure!", sc->bce_unit); 4195 4196 } 4197 goto bce_rx_int_next_rx; 4198 } 4199 4200 /* Skip over the l2_fhdr when passing the data up the stack. */ 4201 m_adj(m, sizeof(struct l2_fhdr) + ETHER_ALIGN); 4202 4203 /* Adjust the packet length to match the received data. */ 4204 m->m_pkthdr.len = m->m_len = len; 4205 4206 /* Send the packet to the appropriate interface. */ 4207 m->m_pkthdr.rcvif = ifp; 4208 4209 DBRUN(BCE_VERBOSE_RECV, 4210 struct ether_header *eh; 4211 eh = mtod(m, struct ether_header *); 4212 BCE_PRINTF(sc, "%s(): to: %6D, from: %6D, type: 0x%04X\n", 4213 __FUNCTION__, eh->ether_dhost, ":", 4214 eh->ether_shost, ":", htons(eh->ether_type))); 4215 4216 /* Validate the checksum if offload enabled. */ 4217 if (ifp->if_capenable & IFCAP_RXCSUM) { 4218 4219 /* Check for an IP datagram. */ 4220 if (status & L2_FHDR_STATUS_IP_DATAGRAM) { 4221 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 4222 4223 /* Check if the IP checksum is valid. */ 4224 if ((l2fhdr->l2_fhdr_ip_xsum ^ 0xffff) == 0) 4225 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 4226 else 4227 DBPRINT(sc, BCE_WARN_SEND, 4228 "%s(): Invalid IP checksum = 0x%04X!\n", 4229 __FUNCTION__, l2fhdr->l2_fhdr_ip_xsum); 4230 } 4231 4232 /* Check for a valid TCP/UDP frame. */ 4233 if (status & (L2_FHDR_STATUS_TCP_SEGMENT | 4234 L2_FHDR_STATUS_UDP_DATAGRAM)) { 4235 4236 /* Check for a good TCP/UDP checksum. */ 4237 if ((status & (L2_FHDR_ERRORS_TCP_XSUM | 4238 L2_FHDR_ERRORS_UDP_XSUM)) == 0) { 4239 m->m_pkthdr.csum_data = 4240 l2fhdr->l2_fhdr_tcp_udp_xsum; 4241 m->m_pkthdr.csum_flags |= (CSUM_DATA_VALID 4242 | CSUM_PSEUDO_HDR); 4243 } else 4244 DBPRINT(sc, BCE_WARN_SEND, 4245 "%s(): Invalid TCP/UDP checksum = 0x%04X!\n", 4246 __FUNCTION__, l2fhdr->l2_fhdr_tcp_udp_xsum); 4247 } 4248 } 4249 4250 4251 /* 4252 * If we received a packet with a vlan tag, 4253 * attach that information to the packet. 4254 */ 4255 if (status & L2_FHDR_STATUS_L2_VLAN_TAG) { 4256 DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): VLAN tag = 0x%04X\n", 4257 __FUNCTION__, l2fhdr->l2_fhdr_vlan_tag); 4258#if __FreeBSD_version < 700000 4259 VLAN_INPUT_TAG(ifp, m, l2fhdr->l2_fhdr_vlan_tag, continue); 4260#else 4261 m->m_pkthdr.ether_vtag = l2fhdr->l2_fhdr_vlan_tag; 4262 m->m_flags |= M_VLANTAG; 4263#endif 4264 } 4265 4266 /* Pass the mbuf off to the upper layers. */ 4267 ifp->if_ipackets++; 4268 DBPRINT(sc, BCE_VERBOSE_RECV, "%s(): Passing received frame up.\n", 4269 __FUNCTION__); 4270 BCE_UNLOCK(sc); 4271 (*ifp->if_input)(ifp, m); 4272 DBRUNIF(1, sc->rx_mbuf_alloc--); 4273 BCE_LOCK(sc); 4274 4275bce_rx_int_next_rx: 4276 sw_prod = NEXT_RX_BD(sw_prod); 4277 } 4278 4279 sw_cons = NEXT_RX_BD(sw_cons); 4280 4281 /* Refresh hw_cons to see if there's new work */ 4282 if (sw_cons == hw_cons) { 4283 hw_cons = sc->hw_rx_cons = sblk->status_rx_quick_consumer_index0; 4284 if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE) 4285 hw_cons++; 4286 } 4287 4288 /* Prevent speculative reads from getting ahead of the status block. */ 4289 bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0, 4290 BUS_SPACE_BARRIER_READ); 4291 } 4292 4293 for (int i = 0; i < RX_PAGES; i++) 4294 bus_dmamap_sync(sc->rx_bd_chain_tag, 4295 sc->rx_bd_chain_map[i], BUS_DMASYNC_PREWRITE); 4296 4297 sc->rx_cons = sw_cons; 4298 sc->rx_prod = sw_prod; 4299 sc->rx_prod_bseq = sw_prod_bseq; 4300 4301 REG_WR16(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BDIDX, sc->rx_prod); 4302 REG_WR(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BSEQ, sc->rx_prod_bseq); 4303 4304 DBPRINT(sc, BCE_INFO_RECV, "%s(exit): rx_prod = 0x%04X, " 4305 "rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n", 4306 __FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq); 4307} 4308 4309 4310/****************************************************************************/ 4311/* Handles transmit completion interrupt events. */ 4312/* */ 4313/* Returns: */ 4314/* Nothing. */ 4315/****************************************************************************/ 4316static void 4317bce_tx_intr(struct bce_softc *sc) 4318{ 4319 struct status_block *sblk = sc->status_block; 4320 struct ifnet *ifp = sc->bce_ifp; 4321 u16 hw_tx_cons, sw_tx_cons, sw_tx_chain_cons; 4322 4323 BCE_LOCK_ASSERT(sc); 4324 4325 DBRUNIF(1, sc->tx_interrupts++); 4326 4327 /* Get the hardware's view of the TX consumer index. */ 4328 hw_tx_cons = sc->hw_tx_cons = sblk->status_tx_quick_consumer_index0; 4329 4330 /* Skip to the next entry if this is a chain page pointer. */ 4331 if ((hw_tx_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE) 4332 hw_tx_cons++; 4333 4334 sw_tx_cons = sc->tx_cons; 4335 4336 /* Prevent speculative reads from getting ahead of the status block. */ 4337 bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0, 4338 BUS_SPACE_BARRIER_READ); 4339 4340 /* Cycle through any completed TX chain page entries. */ 4341 while (sw_tx_cons != hw_tx_cons) { 4342#ifdef BCE_DEBUG 4343 struct tx_bd *txbd = NULL; 4344#endif 4345 sw_tx_chain_cons = TX_CHAIN_IDX(sw_tx_cons); 4346 4347 DBPRINT(sc, BCE_INFO_SEND, 4348 "%s(): hw_tx_cons = 0x%04X, sw_tx_cons = 0x%04X, " 4349 "sw_tx_chain_cons = 0x%04X\n", 4350 __FUNCTION__, hw_tx_cons, sw_tx_cons, sw_tx_chain_cons); 4351 4352 DBRUNIF((sw_tx_chain_cons > MAX_TX_BD), 4353 BCE_PRINTF(sc, "%s(%d): TX chain consumer out of range! " 4354 " 0x%04X > 0x%04X\n", 4355 __FILE__, __LINE__, sw_tx_chain_cons, 4356 (int) MAX_TX_BD); 4357 bce_breakpoint(sc)); 4358 4359 DBRUNIF(1, 4360 txbd = &sc->tx_bd_chain[TX_PAGE(sw_tx_chain_cons)] 4361 [TX_IDX(sw_tx_chain_cons)]); 4362 4363 DBRUNIF((txbd == NULL), 4364 BCE_PRINTF(sc, "%s(%d): Unexpected NULL tx_bd[0x%04X]!\n", 4365 __FILE__, __LINE__, sw_tx_chain_cons); 4366 bce_breakpoint(sc)); 4367 4368 DBRUN(BCE_INFO_SEND, 4369 BCE_PRINTF(sc, "%s(): ", __FUNCTION__); 4370 bce_dump_txbd(sc, sw_tx_chain_cons, txbd)); 4371 4372 /* 4373 * Free the associated mbuf. Remember 4374 * that only the last tx_bd of a packet 4375 * has an mbuf pointer and DMA map. 4376 */ 4377 if (sc->tx_mbuf_ptr[sw_tx_chain_cons] != NULL) { 4378 4379 /* Validate that this is the last tx_bd. */ 4380 DBRUNIF((!(txbd->tx_bd_vlan_tag_flags & TX_BD_FLAGS_END)), 4381 BCE_PRINTF(sc, "%s(%d): tx_bd END flag not set but " 4382 "txmbuf == NULL!\n", __FILE__, __LINE__); 4383 bce_breakpoint(sc)); 4384 4385 DBRUN(BCE_INFO_SEND, 4386 BCE_PRINTF(sc, "%s(): Unloading map/freeing mbuf " 4387 "from tx_bd[0x%04X]\n", __FUNCTION__, sw_tx_chain_cons)); 4388 4389 /* Unmap the mbuf. */ 4390 bus_dmamap_unload(sc->tx_mbuf_tag, 4391 sc->tx_mbuf_map[sw_tx_chain_cons]); 4392 4393 /* Free the mbuf. */ 4394 m_freem(sc->tx_mbuf_ptr[sw_tx_chain_cons]); 4395 sc->tx_mbuf_ptr[sw_tx_chain_cons] = NULL; 4396 DBRUNIF(1, sc->tx_mbuf_alloc--); 4397 4398 ifp->if_opackets++; 4399 } 4400 4401 sc->used_tx_bd--; 4402 sw_tx_cons = NEXT_TX_BD(sw_tx_cons); 4403 4404 /* Refresh hw_cons to see if there's new work. */ 4405 hw_tx_cons = sc->hw_tx_cons = sblk->status_tx_quick_consumer_index0; 4406 if ((hw_tx_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE) 4407 hw_tx_cons++; 4408 4409 /* Prevent speculative reads from getting ahead of the status block. */ 4410 bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0, 4411 BUS_SPACE_BARRIER_READ); 4412 } 4413 4414 /* Clear the TX timeout timer. */ 4415 ifp->if_timer = 0; 4416 4417 /* Clear the tx hardware queue full flag. */ 4418 if ((sc->used_tx_bd + BCE_TX_SLACK_SPACE) < USABLE_TX_BD) { 4419 DBRUNIF((ifp->if_drv_flags & IFF_DRV_OACTIVE), 4420 BCE_PRINTF(sc, "%s(): TX chain is open for business! Used tx_bd = %d\n", 4421 __FUNCTION__, sc->used_tx_bd)); 4422 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4423 } 4424 4425 sc->tx_cons = sw_tx_cons; 4426} 4427 4428 4429/****************************************************************************/ 4430/* Disables interrupt generation. */ 4431/* */ 4432/* Returns: */ 4433/* Nothing. */ 4434/****************************************************************************/ 4435static void 4436bce_disable_intr(struct bce_softc *sc) 4437{ 4438 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, 4439 BCE_PCICFG_INT_ACK_CMD_MASK_INT); 4440 REG_RD(sc, BCE_PCICFG_INT_ACK_CMD); 4441} 4442 4443 4444/****************************************************************************/ 4445/* Enables interrupt generation. */ 4446/* */ 4447/* Returns: */ 4448/* Nothing. */ 4449/****************************************************************************/ 4450static void 4451bce_enable_intr(struct bce_softc *sc) 4452{ 4453 u32 val; 4454 4455 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, 4456 BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | 4457 BCE_PCICFG_INT_ACK_CMD_MASK_INT | sc->last_status_idx); 4458 4459 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, 4460 BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx); 4461 4462 val = REG_RD(sc, BCE_HC_COMMAND); 4463 REG_WR(sc, BCE_HC_COMMAND, val | BCE_HC_COMMAND_COAL_NOW); 4464} 4465 4466 4467/****************************************************************************/ 4468/* Handles controller initialization. */ 4469/* */ 4470/* Must be called from a locked routine. */ 4471/* */ 4472/* Returns: */ 4473/* Nothing. */ 4474/****************************************************************************/ 4475static void 4476bce_init_locked(struct bce_softc *sc) 4477{ 4478 struct ifnet *ifp; 4479 u32 ether_mtu; 4480 4481 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 4482 4483 BCE_LOCK_ASSERT(sc); 4484 4485 ifp = sc->bce_ifp; 4486 4487 /* Check if the driver is still running and bail out if it is. */ 4488 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4489 goto bce_init_locked_exit; 4490 4491 bce_stop(sc); 4492 4493 if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) { 4494 BCE_PRINTF(sc, "%s(%d): Controller reset failed!\n", 4495 __FILE__, __LINE__); 4496 goto bce_init_locked_exit; 4497 } 4498 4499 if (bce_chipinit(sc)) { 4500 BCE_PRINTF(sc, "%s(%d): Controller initialization failed!\n", 4501 __FILE__, __LINE__); 4502 goto bce_init_locked_exit; 4503 } 4504 4505 if (bce_blockinit(sc)) { 4506 BCE_PRINTF(sc, "%s(%d): Block initialization failed!\n", 4507 __FILE__, __LINE__); 4508 goto bce_init_locked_exit; 4509 } 4510 4511 /* Load our MAC address. */ 4512 bcopy(IF_LLADDR(sc->bce_ifp), sc->eaddr, ETHER_ADDR_LEN); 4513 bce_set_mac_addr(sc); 4514 4515 /* Calculate and program the Ethernet MTU size. */ 4516 ether_mtu = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN + ifp->if_mtu + 4517 ETHER_CRC_LEN; 4518 4519 DBPRINT(sc, BCE_INFO, "%s(): setting mtu = %d\n",__FUNCTION__, ether_mtu); 4520 4521 /* 4522 * Program the mtu, enabling jumbo frame 4523 * support if necessary. Also set the mbuf 4524 * allocation count for RX frames. 4525 */ 4526 if (ether_mtu > ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN) { 4527 REG_WR(sc, BCE_EMAC_RX_MTU_SIZE, ether_mtu | 4528 BCE_EMAC_RX_MTU_SIZE_JUMBO_ENA); 4529 sc->mbuf_alloc_size = MJUM9BYTES; 4530 } else { 4531 REG_WR(sc, BCE_EMAC_RX_MTU_SIZE, ether_mtu); 4532 sc->mbuf_alloc_size = MCLBYTES; 4533 } 4534 4535 /* Calculate the RX Ethernet frame size for rx_bd's. */ 4536 sc->max_frame_size = sizeof(struct l2_fhdr) + 2 + ether_mtu + 8; 4537 4538 DBPRINT(sc, BCE_INFO, 4539 "%s(): mclbytes = %d, mbuf_alloc_size = %d, " 4540 "max_frame_size = %d\n", 4541 __FUNCTION__, (int) MCLBYTES, sc->mbuf_alloc_size, sc->max_frame_size); 4542 4543 /* Program appropriate promiscuous/multicast filtering. */ 4544 bce_set_rx_mode(sc); 4545 4546 /* Init RX buffer descriptor chain. */ 4547 bce_init_rx_chain(sc); 4548 4549 /* Init TX buffer descriptor chain. */ 4550 bce_init_tx_chain(sc); 4551 4552#ifdef DEVICE_POLLING 4553 /* Disable interrupts if we are polling. */ 4554 if (ifp->if_capenable & IFCAP_POLLING) { 4555 bce_disable_intr(sc); 4556 4557 REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP, 4558 (1 << 16) | sc->bce_rx_quick_cons_trip); 4559 REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP, 4560 (1 << 16) | sc->bce_tx_quick_cons_trip); 4561 } else 4562#endif 4563 /* Enable host interrupts. */ 4564 bce_enable_intr(sc); 4565 4566 bce_ifmedia_upd(ifp); 4567 4568 ifp->if_drv_flags |= IFF_DRV_RUNNING; 4569 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 4570 4571 callout_reset(&sc->bce_stat_ch, hz, bce_tick, sc); 4572 4573bce_init_locked_exit: 4574 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 4575 4576 return; 4577} 4578 4579static void 4580bce_mgmt_init_locked(struct bce_softc *sc) 4581{ 4582 u32 val; 4583 struct ifnet *ifp; 4584 4585 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 4586 4587 BCE_LOCK_ASSERT(sc); 4588 4589 ifp = sc->bce_ifp; 4590 4591 /* Check if the driver is still running and bail out if it is. */ 4592 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 4593 goto bce_mgmt_init_locked_exit; 4594 4595 /* Initialize the on-boards CPUs */ 4596 bce_init_cpus(sc); 4597 4598 val = (BCM_PAGE_BITS - 8) << 24; 4599 REG_WR(sc, BCE_RV2P_CONFIG, val); 4600 4601 /* Enable all critical blocks in the MAC. */ 4602 REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, 4603 BCE_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE | 4604 BCE_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE | 4605 BCE_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE); 4606 REG_RD(sc, BCE_MISC_ENABLE_SET_BITS); 4607 DELAY(20); 4608 4609 bce_ifmedia_upd(ifp); 4610bce_mgmt_init_locked_exit: 4611 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 4612 4613 return; 4614} 4615 4616 4617/****************************************************************************/ 4618/* Handles controller initialization when called from an unlocked routine. */ 4619/* */ 4620/* Returns: */ 4621/* Nothing. */ 4622/****************************************************************************/ 4623static void 4624bce_init(void *xsc) 4625{ 4626 struct bce_softc *sc = xsc; 4627 4628 BCE_LOCK(sc); 4629 bce_init_locked(sc); 4630 BCE_UNLOCK(sc); 4631} 4632 4633 4634/****************************************************************************/ 4635/* Encapsultes an mbuf cluster into the tx_bd chain structure and makes the */ 4636/* memory visible to the controller. */ 4637/* */ 4638/* Returns: */ 4639/* 0 for success, positive value for failure. */ 4640/****************************************************************************/ 4641static int 4642bce_tx_encap(struct bce_softc *sc, struct mbuf *m_head, u16 *prod, 4643 u16 *chain_prod, u32 *prod_bseq) 4644{ 4645 u32 vlan_tag_flags = 0; 4646 struct bce_dmamap_arg map_arg; 4647 bus_dmamap_t map; 4648 int error, rc = 0; 4649 4650 /* Transfer any checksum offload flags to the bd. */ 4651 if (m_head->m_pkthdr.csum_flags) { 4652 if (m_head->m_pkthdr.csum_flags & CSUM_IP) 4653 vlan_tag_flags |= TX_BD_FLAGS_IP_CKSUM; 4654 if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)) 4655 vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM; 4656 } 4657 4658 /* Transfer any VLAN tags to the bd. */ 4659 if (m_head->m_flags & M_VLANTAG) 4660 vlan_tag_flags |= (TX_BD_FLAGS_VLAN_TAG | 4661 (m_head->m_pkthdr.ether_vtag << 16)); 4662 4663 /* Map the mbuf into DMAable memory. */ 4664 map = sc->tx_mbuf_map[*chain_prod]; 4665 map_arg.sc = sc; 4666 map_arg.prod = *prod; 4667 map_arg.chain_prod = *chain_prod; 4668 map_arg.prod_bseq = *prod_bseq; 4669 map_arg.tx_flags = vlan_tag_flags; 4670 map_arg.maxsegs = USABLE_TX_BD - sc->used_tx_bd - 4671 BCE_TX_SLACK_SPACE; 4672 4673 KASSERT(map_arg.maxsegs > 0, ("Invalid TX maxsegs value!")); 4674 4675 /* Map the mbuf into our DMA address space. */ 4676 error = bus_dmamap_load_mbuf(sc->tx_mbuf_tag, map, m_head, 4677 bce_dma_map_tx_desc, &map_arg, BUS_DMA_NOWAIT); 4678 4679 if (error || map_arg.maxsegs == 0) { 4680 4681 /* Try to defrag the mbuf if there are too many segments. */ 4682 if (error == EFBIG && map_arg.maxsegs != 0) { 4683 struct mbuf *m0; 4684 4685 DBPRINT(sc, BCE_WARN, "%s(): fragmented mbuf (%d pieces)\n", 4686 __FUNCTION__, map_arg.maxsegs); 4687 4688 m0 = m_defrag(m_head, M_DONTWAIT); 4689 if (m0 != NULL) { 4690 m_head = m0; 4691 error = bus_dmamap_load_mbuf(sc->tx_mbuf_tag, 4692 map, m_head, bce_dma_map_tx_desc, &map_arg, 4693 BUS_DMA_NOWAIT); 4694 } 4695 } 4696 4697 /* Still getting an error after a defrag. */ 4698 if (error) { 4699 BCE_PRINTF(sc, 4700 "%s(%d): Error mapping mbuf into TX chain!\n", 4701 __FILE__, __LINE__); 4702 rc = ENOBUFS; 4703 goto bce_tx_encap_exit; 4704 } 4705 4706 } 4707 4708 /* 4709 * Ensure that the map for this transmission 4710 * is placed at the array index of the last 4711 * descriptor in this chain. This is done 4712 * because a single map is used for all 4713 * segments of the mbuf and we don't want to 4714 * delete the map before all of the segments 4715 * have been freed. 4716 */ 4717 sc->tx_mbuf_map[*chain_prod] = 4718 sc->tx_mbuf_map[map_arg.chain_prod]; 4719 sc->tx_mbuf_map[map_arg.chain_prod] = map; 4720 sc->tx_mbuf_ptr[map_arg.chain_prod] = m_head; 4721 sc->used_tx_bd += map_arg.maxsegs; 4722 4723 DBRUNIF((sc->used_tx_bd > sc->tx_hi_watermark), 4724 sc->tx_hi_watermark = sc->used_tx_bd); 4725 4726 DBRUNIF(1, sc->tx_mbuf_alloc++); 4727 4728 DBRUN(BCE_VERBOSE_SEND, bce_dump_tx_mbuf_chain(sc, *chain_prod, 4729 map_arg.maxsegs)); 4730 4731 /* prod still points the last used tx_bd at this point. */ 4732 *prod = map_arg.prod; 4733 *chain_prod = map_arg.chain_prod; 4734 *prod_bseq = map_arg.prod_bseq; 4735 4736bce_tx_encap_exit: 4737 4738 return(rc); 4739} 4740 4741 4742/****************************************************************************/ 4743/* Main transmit routine when called from another routine with a lock. */ 4744/* */ 4745/* Returns: */ 4746/* Nothing. */ 4747/****************************************************************************/ 4748static void 4749bce_start_locked(struct ifnet *ifp) 4750{ 4751 struct bce_softc *sc = ifp->if_softc; 4752 struct mbuf *m_head = NULL; 4753 int count = 0; 4754 u16 tx_prod, tx_chain_prod; 4755 u32 tx_prod_bseq; 4756 4757 /* If there's no link or the transmit queue is empty then just exit. */ 4758 if (!sc->bce_link || IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { 4759 DBPRINT(sc, BCE_INFO_SEND, "%s(): No link or transmit queue empty.\n", 4760 __FUNCTION__); 4761 goto bce_start_locked_exit; 4762 } 4763 4764 /* prod points to the next free tx_bd. */ 4765 tx_prod = sc->tx_prod; 4766 tx_chain_prod = TX_CHAIN_IDX(tx_prod); 4767 tx_prod_bseq = sc->tx_prod_bseq; 4768 4769 DBPRINT(sc, BCE_INFO_SEND, 4770 "%s(): Start: tx_prod = 0x%04X, tx_chain_prod = %04X, " 4771 "tx_prod_bseq = 0x%08X\n", 4772 __FUNCTION__, tx_prod, tx_chain_prod, tx_prod_bseq); 4773 4774 /* Keep adding entries while there is space in the ring. */ 4775 while(sc->tx_mbuf_ptr[tx_chain_prod] == NULL) { 4776 4777 /* Check for any frames to send. */ 4778 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 4779 if (m_head == NULL) 4780 break; 4781 4782 /* 4783 * Pack the data into the transmit ring. If we 4784 * don't have room, place the mbuf back at the 4785 * head of the queue and set the OACTIVE flag 4786 * to wait for the NIC to drain the chain. 4787 */ 4788 if (bce_tx_encap(sc, m_head, &tx_prod, &tx_chain_prod, &tx_prod_bseq)) { 4789 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 4790 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 4791 DBPRINT(sc, BCE_INFO_SEND, 4792 "TX chain is closed for business! Total tx_bd used = %d\n", 4793 sc->used_tx_bd); 4794 break; 4795 } 4796 4797 count++; 4798 4799 /* Send a copy of the frame to any BPF listeners. */ 4800 BPF_MTAP(ifp, m_head); 4801 4802 tx_prod = NEXT_TX_BD(tx_prod); 4803 tx_chain_prod = TX_CHAIN_IDX(tx_prod); 4804 } 4805 4806 if (count == 0) { 4807 /* no packets were dequeued */ 4808 DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): No packets were dequeued\n", 4809 __FUNCTION__); 4810 goto bce_start_locked_exit; 4811 } 4812 4813 /* Update the driver's counters. */ 4814 sc->tx_prod = tx_prod; 4815 sc->tx_prod_bseq = tx_prod_bseq; 4816 4817 DBPRINT(sc, BCE_INFO_SEND, 4818 "%s(): End: tx_prod = 0x%04X, tx_chain_prod = 0x%04X, " 4819 "tx_prod_bseq = 0x%08X\n", 4820 __FUNCTION__, tx_prod, tx_chain_prod, tx_prod_bseq); 4821 4822 /* Start the transmit. */ 4823 REG_WR16(sc, MB_TX_CID_ADDR + BCE_L2CTX_TX_HOST_BIDX, sc->tx_prod); 4824 REG_WR(sc, MB_TX_CID_ADDR + BCE_L2CTX_TX_HOST_BSEQ, sc->tx_prod_bseq); 4825 4826 /* Set the tx timeout. */ 4827 ifp->if_timer = BCE_TX_TIMEOUT; 4828 4829bce_start_locked_exit: 4830 return; 4831} 4832 4833 4834/****************************************************************************/ 4835/* Main transmit routine when called from another routine without a lock. */ 4836/* */ 4837/* Returns: */ 4838/* Nothing. */ 4839/****************************************************************************/ 4840static void 4841bce_start(struct ifnet *ifp) 4842{ 4843 struct bce_softc *sc = ifp->if_softc; 4844 4845 BCE_LOCK(sc); 4846 bce_start_locked(ifp); 4847 BCE_UNLOCK(sc); 4848} 4849 4850 4851/****************************************************************************/ 4852/* Handles any IOCTL calls from the operating system. */ 4853/* */ 4854/* Returns: */ 4855/* 0 for success, positive value for failure. */ 4856/****************************************************************************/ 4857static int 4858bce_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 4859{ 4860 struct bce_softc *sc = ifp->if_softc; 4861 struct ifreq *ifr = (struct ifreq *) data; 4862 struct mii_data *mii; 4863 int mask, error = 0; 4864 4865 DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__); 4866 4867 switch(command) { 4868 4869 /* Set the MTU. */ 4870 case SIOCSIFMTU: 4871 /* Check that the MTU setting is supported. */ 4872 if ((ifr->ifr_mtu < BCE_MIN_MTU) || 4873 (ifr->ifr_mtu > BCE_MAX_JUMBO_MTU)) { 4874 error = EINVAL; 4875 break; 4876 } 4877 4878 DBPRINT(sc, BCE_INFO, "Setting new MTU of %d\n", ifr->ifr_mtu); 4879 4880 BCE_LOCK(sc); 4881 ifp->if_mtu = ifr->ifr_mtu; 4882 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 4883 bce_init_locked(sc); 4884 BCE_UNLOCK(sc); 4885 break; 4886 4887 /* Set interface. */ 4888 case SIOCSIFFLAGS: 4889 DBPRINT(sc, BCE_VERBOSE, "Received SIOCSIFFLAGS\n"); 4890 4891 BCE_LOCK(sc); 4892 4893 /* Check if the interface is up. */ 4894 if (ifp->if_flags & IFF_UP) { 4895 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4896 /* Change the promiscuous/multicast flags as necessary. */ 4897 bce_set_rx_mode(sc); 4898 } else { 4899 /* Start the HW */ 4900 bce_init_locked(sc); 4901 } 4902 } else { 4903 /* The interface is down. Check if the driver is running. */ 4904 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4905 bce_stop(sc); 4906 } 4907 } 4908 4909 BCE_UNLOCK(sc); 4910 error = 0; 4911 4912 break; 4913 4914 /* Add/Delete multicast address */ 4915 case SIOCADDMULTI: 4916 case SIOCDELMULTI: 4917 DBPRINT(sc, BCE_VERBOSE, "Received SIOCADDMULTI/SIOCDELMULTI\n"); 4918 4919 BCE_LOCK(sc); 4920 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 4921 bce_set_rx_mode(sc); 4922 error = 0; 4923 } 4924 BCE_UNLOCK(sc); 4925 4926 break; 4927 4928 /* Set/Get Interface media */ 4929 case SIOCSIFMEDIA: 4930 case SIOCGIFMEDIA: 4931 DBPRINT(sc, BCE_VERBOSE, "Received SIOCSIFMEDIA/SIOCGIFMEDIA\n"); 4932 4933 DBPRINT(sc, BCE_VERBOSE, "bce_phy_flags = 0x%08X\n", 4934 sc->bce_phy_flags); 4935 4936 if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) { 4937 DBPRINT(sc, BCE_VERBOSE, "SerDes media set/get\n"); 4938 4939 error = ifmedia_ioctl(ifp, ifr, 4940 &sc->bce_ifmedia, command); 4941 } else { 4942 DBPRINT(sc, BCE_VERBOSE, "Copper media set/get\n"); 4943 mii = device_get_softc(sc->bce_miibus); 4944 error = ifmedia_ioctl(ifp, ifr, 4945 &mii->mii_media, command); 4946 } 4947 break; 4948 4949 /* Set interface capability */ 4950 case SIOCSIFCAP: 4951 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 4952 DBPRINT(sc, BCE_INFO, "Received SIOCSIFCAP = 0x%08X\n", (u32) mask); 4953 4954#ifdef DEVICE_POLLING 4955 if (mask & IFCAP_POLLING) { 4956 if (ifr->ifr_reqcap & IFCAP_POLLING) { 4957 4958 /* Setup the poll routine to call. */ 4959 error = ether_poll_register(bce_poll, ifp); 4960 if (error) { 4961 BCE_PRINTF(sc, "%s(%d): Error registering poll function!\n", 4962 __FILE__, __LINE__); 4963 goto bce_ioctl_exit; 4964 } 4965 4966 /* Clear the interrupt. */ 4967 BCE_LOCK(sc); 4968 bce_disable_intr(sc); 4969 4970 REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP, 4971 (1 << 16) | sc->bce_rx_quick_cons_trip); 4972 REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP, 4973 (1 << 16) | sc->bce_tx_quick_cons_trip); 4974 4975 ifp->if_capenable |= IFCAP_POLLING; 4976 BCE_UNLOCK(sc); 4977 } else { 4978 /* Clear the poll routine. */ 4979 error = ether_poll_deregister(ifp); 4980 4981 /* Enable interrupt even in error case */ 4982 BCE_LOCK(sc); 4983 bce_enable_intr(sc); 4984 4985 REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP, 4986 (sc->bce_tx_quick_cons_trip_int << 16) | 4987 sc->bce_tx_quick_cons_trip); 4988 REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP, 4989 (sc->bce_rx_quick_cons_trip_int << 16) | 4990 sc->bce_rx_quick_cons_trip); 4991 4992 ifp->if_capenable &= ~IFCAP_POLLING; 4993 BCE_UNLOCK(sc); 4994 } 4995 } 4996#endif /*DEVICE_POLLING */ 4997 4998 /* Toggle the TX checksum capabilites enable flag. */ 4999 if (mask & IFCAP_TXCSUM) { 5000 ifp->if_capenable ^= IFCAP_TXCSUM; 5001 if (IFCAP_TXCSUM & ifp->if_capenable) 5002 ifp->if_hwassist = BCE_IF_HWASSIST; 5003 else 5004 ifp->if_hwassist = 0; 5005 } 5006 5007 /* Toggle the RX checksum capabilities enable flag. */ 5008 if (mask & IFCAP_RXCSUM) { 5009 ifp->if_capenable ^= IFCAP_RXCSUM; 5010 if (IFCAP_RXCSUM & ifp->if_capenable) 5011 ifp->if_hwassist = BCE_IF_HWASSIST; 5012 else 5013 ifp->if_hwassist = 0; 5014 } 5015 5016 /* Toggle VLAN_MTU capabilities enable flag. */ 5017 if (mask & IFCAP_VLAN_MTU) { 5018 BCE_PRINTF(sc, "%s(%d): Changing VLAN_MTU not supported.\n", 5019 __FILE__, __LINE__); 5020 } 5021 5022 /* Toggle VLANHWTAG capabilities enabled flag. */ 5023 if (mask & IFCAP_VLAN_HWTAGGING) { 5024 if (sc->bce_flags & BCE_MFW_ENABLE_FLAG) 5025 BCE_PRINTF(sc, "%s(%d): Cannot change VLAN_HWTAGGING while " 5026 "management firmware (ASF/IPMI/UMP) is running!\n", 5027 __FILE__, __LINE__); 5028 else 5029 BCE_PRINTF(sc, "%s(%d): Changing VLAN_HWTAGGING not supported!\n", 5030 __FILE__, __LINE__); 5031 } 5032 5033 break; 5034 default: 5035 DBPRINT(sc, BCE_INFO, "Received unsupported IOCTL: 0x%08X\n", 5036 (u32) command); 5037 5038 /* We don't know how to handle the IOCTL, pass it on. */ 5039 error = ether_ioctl(ifp, command, data); 5040 break; 5041 } 5042 5043#ifdef DEVICE_POLLING 5044bce_ioctl_exit: 5045#endif 5046 5047 DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__); 5048 5049 return(error); 5050} 5051 5052 5053/****************************************************************************/ 5054/* Transmit timeout handler. */ 5055/* */ 5056/* Returns: */ 5057/* Nothing. */ 5058/****************************************************************************/ 5059static void 5060bce_watchdog(struct ifnet *ifp) 5061{ 5062 struct bce_softc *sc = ifp->if_softc; 5063 5064 DBRUN(BCE_WARN_SEND, 5065 bce_dump_driver_state(sc); 5066 bce_dump_status_block(sc)); 5067 5068 BCE_PRINTF(sc, "%s(%d): Watchdog timeout occurred, resetting!\n", 5069 __FILE__, __LINE__); 5070 5071 /* DBRUN(BCE_FATAL, bce_breakpoint(sc)); */ 5072 5073 BCE_LOCK(sc); 5074 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 5075 5076 bce_init_locked(sc); 5077 ifp->if_oerrors++; 5078 BCE_UNLOCK(sc); 5079 5080} 5081 5082 5083#ifdef DEVICE_POLLING 5084static void 5085bce_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) 5086{ 5087 struct bce_softc *sc = ifp->if_softc; 5088 5089 BCE_LOCK_ASSERT(sc); 5090 5091 sc->bce_rxcycles = count; 5092 5093 bus_dmamap_sync(sc->status_tag, sc->status_map, 5094 BUS_DMASYNC_POSTWRITE); 5095 5096 /* Check for any completed RX frames. */ 5097 if (sc->status_block->status_rx_quick_consumer_index0 != 5098 sc->hw_rx_cons) 5099 bce_rx_intr(sc); 5100 5101 /* Check for any completed TX frames. */ 5102 if (sc->status_block->status_tx_quick_consumer_index0 != 5103 sc->hw_tx_cons) 5104 bce_tx_intr(sc); 5105 5106 /* Check for new frames to transmit. */ 5107 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 5108 bce_start_locked(ifp); 5109 5110} 5111 5112 5113static void 5114bce_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 5115{ 5116 struct bce_softc *sc = ifp->if_softc; 5117 5118 BCE_LOCK(sc); 5119 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 5120 bce_poll_locked(ifp, cmd, count); 5121 BCE_UNLOCK(sc); 5122} 5123#endif /* DEVICE_POLLING */ 5124 5125 5126#if 0 5127static inline int 5128bce_has_work(struct bce_softc *sc) 5129{ 5130 struct status_block *stat = sc->status_block; 5131 5132 if ((stat->status_rx_quick_consumer_index0 != sc->hw_rx_cons) || 5133 (stat->status_tx_quick_consumer_index0 != sc->hw_tx_cons)) 5134 return 1; 5135 5136 if (((stat->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) != 0) != 5137 bp->link_up) 5138 return 1; 5139 5140 return 0; 5141} 5142#endif 5143 5144 5145/* 5146 * Interrupt handler. 5147 */ 5148/****************************************************************************/ 5149/* Main interrupt entry point. Verifies that the controller generated the */ 5150/* interrupt and then calls a separate routine for handle the various */ 5151/* interrupt causes (PHY, TX, RX). */ 5152/* */ 5153/* Returns: */ 5154/* 0 for success, positive value for failure. */ 5155/****************************************************************************/ 5156static void 5157bce_intr(void *xsc) 5158{ 5159 struct bce_softc *sc; 5160 struct ifnet *ifp; 5161 u32 status_attn_bits; 5162 5163 sc = xsc; 5164 ifp = sc->bce_ifp; 5165 5166 BCE_LOCK(sc); 5167 5168 DBRUNIF(1, sc->interrupts_generated++); 5169 5170#ifdef DEVICE_POLLING 5171 if (ifp->if_capenable & IFCAP_POLLING) { 5172 DBPRINT(sc, BCE_INFO, "Polling enabled!\n"); 5173 goto bce_intr_exit; 5174 } 5175#endif 5176 5177 bus_dmamap_sync(sc->status_tag, sc->status_map, 5178 BUS_DMASYNC_POSTWRITE); 5179 5180 /* 5181 * If the hardware status block index 5182 * matches the last value read by the 5183 * driver and we haven't asserted our 5184 * interrupt then there's nothing to do. 5185 */ 5186 if ((sc->status_block->status_idx == sc->last_status_idx) && 5187 (REG_RD(sc, BCE_PCICFG_MISC_STATUS) & BCE_PCICFG_MISC_STATUS_INTA_VALUE)) 5188 goto bce_intr_exit; 5189 5190 /* Ack the interrupt and stop others from occuring. */ 5191 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, 5192 BCE_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | 5193 BCE_PCICFG_INT_ACK_CMD_MASK_INT); 5194 5195 /* Keep processing data as long as there is work to do. */ 5196 for (;;) { 5197 5198 status_attn_bits = sc->status_block->status_attn_bits; 5199 5200 DBRUNIF(DB_RANDOMTRUE(bce_debug_unexpected_attention), 5201 BCE_PRINTF(sc, "Simulating unexpected status attention bit set."); 5202 status_attn_bits = status_attn_bits | STATUS_ATTN_BITS_PARITY_ERROR); 5203 5204 /* Was it a link change interrupt? */ 5205 if ((status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) != 5206 (sc->status_block->status_attn_bits_ack & STATUS_ATTN_BITS_LINK_STATE)) 5207 bce_phy_intr(sc); 5208 5209 /* If any other attention is asserted then the chip is toast. */ 5210 if (((status_attn_bits & ~STATUS_ATTN_BITS_LINK_STATE) != 5211 (sc->status_block->status_attn_bits_ack & 5212 ~STATUS_ATTN_BITS_LINK_STATE))) { 5213 5214 DBRUN(1, sc->unexpected_attentions++); 5215 5216 BCE_PRINTF(sc, "%s(%d): Fatal attention detected: 0x%08X\n", 5217 __FILE__, __LINE__, sc->status_block->status_attn_bits); 5218 5219 DBRUN(BCE_FATAL, 5220 if (bce_debug_unexpected_attention == 0) 5221 bce_breakpoint(sc)); 5222 5223 bce_init_locked(sc); 5224 goto bce_intr_exit; 5225 } 5226 5227 /* Check for any completed RX frames. */ 5228 if (sc->status_block->status_rx_quick_consumer_index0 != sc->hw_rx_cons) 5229 bce_rx_intr(sc); 5230 5231 /* Check for any completed TX frames. */ 5232 if (sc->status_block->status_tx_quick_consumer_index0 != sc->hw_tx_cons) 5233 bce_tx_intr(sc); 5234 5235 /* Save the status block index value for use during the next interrupt. */ 5236 sc->last_status_idx = sc->status_block->status_idx; 5237 5238 /* Prevent speculative reads from getting ahead of the status block. */ 5239 bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0, 5240 BUS_SPACE_BARRIER_READ); 5241 5242 /* If there's no work left then exit the interrupt service routine. */ 5243 if ((sc->status_block->status_rx_quick_consumer_index0 == sc->hw_rx_cons) && 5244 (sc->status_block->status_tx_quick_consumer_index0 == sc->hw_tx_cons)) 5245 break; 5246 5247 } 5248 5249 bus_dmamap_sync(sc->status_tag, sc->status_map, 5250 BUS_DMASYNC_PREWRITE); 5251 5252 /* Re-enable interrupts. */ 5253 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, 5254 BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx | 5255 BCE_PCICFG_INT_ACK_CMD_MASK_INT); 5256 REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, 5257 BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx); 5258 5259 /* Handle any frames that arrived while handling the interrupt. */ 5260 if (ifp->if_drv_flags & IFF_DRV_RUNNING && !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 5261 bce_start_locked(ifp); 5262 5263bce_intr_exit: 5264 BCE_UNLOCK(sc); 5265} 5266 5267 5268/****************************************************************************/ 5269/* Programs the various packet receive modes (broadcast and multicast). */ 5270/* */ 5271/* Returns: */ 5272/* Nothing. */ 5273/****************************************************************************/ 5274static void 5275bce_set_rx_mode(struct bce_softc *sc) 5276{ 5277 struct ifnet *ifp; 5278 struct ifmultiaddr *ifma; 5279 u32 hashes[4] = { 0, 0, 0, 0 }; 5280 u32 rx_mode, sort_mode; 5281 int h, i; 5282 5283 BCE_LOCK_ASSERT(sc); 5284 5285 ifp = sc->bce_ifp; 5286 5287 /* Initialize receive mode default settings. */ 5288 rx_mode = sc->rx_mode & ~(BCE_EMAC_RX_MODE_PROMISCUOUS | 5289 BCE_EMAC_RX_MODE_KEEP_VLAN_TAG); 5290 sort_mode = 1 | BCE_RPM_SORT_USER0_BC_EN; 5291 5292 /* 5293 * ASF/IPMI/UMP firmware requires that VLAN tag stripping 5294 * be enbled. 5295 */ 5296 if (!(BCE_IF_CAPABILITIES & IFCAP_VLAN_HWTAGGING) && 5297 (!(sc->bce_flags & BCE_MFW_ENABLE_FLAG))) 5298 rx_mode |= BCE_EMAC_RX_MODE_KEEP_VLAN_TAG; 5299 5300 /* 5301 * Check for promiscuous, all multicast, or selected 5302 * multicast address filtering. 5303 */ 5304 if (ifp->if_flags & IFF_PROMISC) { 5305 DBPRINT(sc, BCE_INFO, "Enabling promiscuous mode.\n"); 5306 5307 /* Enable promiscuous mode. */ 5308 rx_mode |= BCE_EMAC_RX_MODE_PROMISCUOUS; 5309 sort_mode |= BCE_RPM_SORT_USER0_PROM_EN; 5310 } else if (ifp->if_flags & IFF_ALLMULTI) { 5311 DBPRINT(sc, BCE_INFO, "Enabling all multicast mode.\n"); 5312 5313 /* Enable all multicast addresses. */ 5314 for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { 5315 REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), 0xffffffff); 5316 } 5317 sort_mode |= BCE_RPM_SORT_USER0_MC_EN; 5318 } else { 5319 /* Accept one or more multicast(s). */ 5320 DBPRINT(sc, BCE_INFO, "Enabling selective multicast mode.\n"); 5321 5322 IF_ADDR_LOCK(ifp); 5323 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 5324 if (ifma->ifma_addr->sa_family != AF_LINK) 5325 continue; 5326 h = ether_crc32_le(LLADDR((struct sockaddr_dl *) 5327 ifma->ifma_addr), ETHER_ADDR_LEN) & 0x7F; 5328 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F); 5329 } 5330 IF_ADDR_UNLOCK(ifp); 5331 5332 for (i = 0; i < 4; i++) 5333 REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), hashes[i]); 5334 5335 sort_mode |= BCE_RPM_SORT_USER0_MC_HSH_EN; 5336 } 5337 5338 /* Only make changes if the recive mode has actually changed. */ 5339 if (rx_mode != sc->rx_mode) { 5340 DBPRINT(sc, BCE_VERBOSE, "Enabling new receive mode: 0x%08X\n", 5341 rx_mode); 5342 5343 sc->rx_mode = rx_mode; 5344 REG_WR(sc, BCE_EMAC_RX_MODE, rx_mode); 5345 } 5346 5347 /* Disable and clear the exisitng sort before enabling a new sort. */ 5348 REG_WR(sc, BCE_RPM_SORT_USER0, 0x0); 5349 REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode); 5350 REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode | BCE_RPM_SORT_USER0_ENA); 5351} 5352 5353 5354/****************************************************************************/ 5355/* Called periodically to updates statistics from the controllers */ 5356/* statistics block. */ 5357/* */ 5358/* Returns: */ 5359/* Nothing. */ 5360/****************************************************************************/ 5361static void 5362bce_stats_update(struct bce_softc *sc) 5363{ 5364 struct ifnet *ifp; 5365 struct statistics_block *stats; 5366 5367 DBPRINT(sc, BCE_EXCESSIVE, "Entering %s()\n", __FUNCTION__); 5368 5369 ifp = sc->bce_ifp; 5370 5371 stats = (struct statistics_block *) sc->stats_block; 5372 5373 /* 5374 * Update the interface statistics from the 5375 * hardware statistics. 5376 */ 5377 ifp->if_collisions = (u_long) stats->stat_EtherStatsCollisions; 5378 5379 ifp->if_ierrors = (u_long) stats->stat_EtherStatsUndersizePkts + 5380 (u_long) stats->stat_EtherStatsOverrsizePkts + 5381 (u_long) stats->stat_IfInMBUFDiscards + 5382 (u_long) stats->stat_Dot3StatsAlignmentErrors + 5383 (u_long) stats->stat_Dot3StatsFCSErrors; 5384 5385 ifp->if_oerrors = (u_long) stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors + 5386 (u_long) stats->stat_Dot3StatsExcessiveCollisions + 5387 (u_long) stats->stat_Dot3StatsLateCollisions; 5388 5389 /* 5390 * Certain controllers don't report 5391 * carrier sense errors correctly. 5392 * See errata E11_5708CA0_1165. 5393 */ 5394 if (!(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) && 5395 !(BCE_CHIP_ID(sc) == BCE_CHIP_ID_5708_A0)) 5396 ifp->if_oerrors += (u_long) stats->stat_Dot3StatsCarrierSenseErrors; 5397 5398 /* 5399 * Update the sysctl statistics from the 5400 * hardware statistics. 5401 */ 5402 sc->stat_IfHCInOctets = 5403 ((u64) stats->stat_IfHCInOctets_hi << 32) + 5404 (u64) stats->stat_IfHCInOctets_lo; 5405 5406 sc->stat_IfHCInBadOctets = 5407 ((u64) stats->stat_IfHCInBadOctets_hi << 32) + 5408 (u64) stats->stat_IfHCInBadOctets_lo; 5409 5410 sc->stat_IfHCOutOctets = 5411 ((u64) stats->stat_IfHCOutOctets_hi << 32) + 5412 (u64) stats->stat_IfHCOutOctets_lo; 5413 5414 sc->stat_IfHCOutBadOctets = 5415 ((u64) stats->stat_IfHCOutBadOctets_hi << 32) + 5416 (u64) stats->stat_IfHCOutBadOctets_lo; 5417 5418 sc->stat_IfHCInUcastPkts = 5419 ((u64) stats->stat_IfHCInUcastPkts_hi << 32) + 5420 (u64) stats->stat_IfHCInUcastPkts_lo; 5421 5422 sc->stat_IfHCInMulticastPkts = 5423 ((u64) stats->stat_IfHCInMulticastPkts_hi << 32) + 5424 (u64) stats->stat_IfHCInMulticastPkts_lo; 5425 5426 sc->stat_IfHCInBroadcastPkts = 5427 ((u64) stats->stat_IfHCInBroadcastPkts_hi << 32) + 5428 (u64) stats->stat_IfHCInBroadcastPkts_lo; 5429 5430 sc->stat_IfHCOutUcastPkts = 5431 ((u64) stats->stat_IfHCOutUcastPkts_hi << 32) + 5432 (u64) stats->stat_IfHCOutUcastPkts_lo; 5433 5434 sc->stat_IfHCOutMulticastPkts = 5435 ((u64) stats->stat_IfHCOutMulticastPkts_hi << 32) + 5436 (u64) stats->stat_IfHCOutMulticastPkts_lo; 5437 5438 sc->stat_IfHCOutBroadcastPkts = 5439 ((u64) stats->stat_IfHCOutBroadcastPkts_hi << 32) + 5440 (u64) stats->stat_IfHCOutBroadcastPkts_lo; 5441 5442 sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors = 5443 stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors; 5444 5445 sc->stat_Dot3StatsCarrierSenseErrors = 5446 stats->stat_Dot3StatsCarrierSenseErrors; 5447 5448 sc->stat_Dot3StatsFCSErrors = 5449 stats->stat_Dot3StatsFCSErrors; 5450 5451 sc->stat_Dot3StatsAlignmentErrors = 5452 stats->stat_Dot3StatsAlignmentErrors; 5453 5454 sc->stat_Dot3StatsSingleCollisionFrames = 5455 stats->stat_Dot3StatsSingleCollisionFrames; 5456 5457 sc->stat_Dot3StatsMultipleCollisionFrames = 5458 stats->stat_Dot3StatsMultipleCollisionFrames; 5459 5460 sc->stat_Dot3StatsDeferredTransmissions = 5461 stats->stat_Dot3StatsDeferredTransmissions; 5462 5463 sc->stat_Dot3StatsExcessiveCollisions = 5464 stats->stat_Dot3StatsExcessiveCollisions; 5465 5466 sc->stat_Dot3StatsLateCollisions = 5467 stats->stat_Dot3StatsLateCollisions; 5468 5469 sc->stat_EtherStatsCollisions = 5470 stats->stat_EtherStatsCollisions; 5471 5472 sc->stat_EtherStatsFragments = 5473 stats->stat_EtherStatsFragments; 5474 5475 sc->stat_EtherStatsJabbers = 5476 stats->stat_EtherStatsJabbers; 5477 5478 sc->stat_EtherStatsUndersizePkts = 5479 stats->stat_EtherStatsUndersizePkts; 5480 5481 sc->stat_EtherStatsOverrsizePkts = 5482 stats->stat_EtherStatsOverrsizePkts; 5483 5484 sc->stat_EtherStatsPktsRx64Octets = 5485 stats->stat_EtherStatsPktsRx64Octets; 5486 5487 sc->stat_EtherStatsPktsRx65Octetsto127Octets = 5488 stats->stat_EtherStatsPktsRx65Octetsto127Octets; 5489 5490 sc->stat_EtherStatsPktsRx128Octetsto255Octets = 5491 stats->stat_EtherStatsPktsRx128Octetsto255Octets; 5492 5493 sc->stat_EtherStatsPktsRx256Octetsto511Octets = 5494 stats->stat_EtherStatsPktsRx256Octetsto511Octets; 5495 5496 sc->stat_EtherStatsPktsRx512Octetsto1023Octets = 5497 stats->stat_EtherStatsPktsRx512Octetsto1023Octets; 5498 5499 sc->stat_EtherStatsPktsRx1024Octetsto1522Octets = 5500 stats->stat_EtherStatsPktsRx1024Octetsto1522Octets; 5501 5502 sc->stat_EtherStatsPktsRx1523Octetsto9022Octets = 5503 stats->stat_EtherStatsPktsRx1523Octetsto9022Octets; 5504 5505 sc->stat_EtherStatsPktsTx64Octets = 5506 stats->stat_EtherStatsPktsTx64Octets; 5507 5508 sc->stat_EtherStatsPktsTx65Octetsto127Octets = 5509 stats->stat_EtherStatsPktsTx65Octetsto127Octets; 5510 5511 sc->stat_EtherStatsPktsTx128Octetsto255Octets = 5512 stats->stat_EtherStatsPktsTx128Octetsto255Octets; 5513 5514 sc->stat_EtherStatsPktsTx256Octetsto511Octets = 5515 stats->stat_EtherStatsPktsTx256Octetsto511Octets; 5516 5517 sc->stat_EtherStatsPktsTx512Octetsto1023Octets = 5518 stats->stat_EtherStatsPktsTx512Octetsto1023Octets; 5519 5520 sc->stat_EtherStatsPktsTx1024Octetsto1522Octets = 5521 stats->stat_EtherStatsPktsTx1024Octetsto1522Octets; 5522 5523 sc->stat_EtherStatsPktsTx1523Octetsto9022Octets = 5524 stats->stat_EtherStatsPktsTx1523Octetsto9022Octets; 5525 5526 sc->stat_XonPauseFramesReceived = 5527 stats->stat_XonPauseFramesReceived; 5528 5529 sc->stat_XoffPauseFramesReceived = 5530 stats->stat_XoffPauseFramesReceived; 5531 5532 sc->stat_OutXonSent = 5533 stats->stat_OutXonSent; 5534 5535 sc->stat_OutXoffSent = 5536 stats->stat_OutXoffSent; 5537 5538 sc->stat_FlowControlDone = 5539 stats->stat_FlowControlDone; 5540 5541 sc->stat_MacControlFramesReceived = 5542 stats->stat_MacControlFramesReceived; 5543 5544 sc->stat_XoffStateEntered = 5545 stats->stat_XoffStateEntered; 5546 5547 sc->stat_IfInFramesL2FilterDiscards = 5548 stats->stat_IfInFramesL2FilterDiscards; 5549 5550 sc->stat_IfInRuleCheckerDiscards = 5551 stats->stat_IfInRuleCheckerDiscards; 5552 5553 sc->stat_IfInFTQDiscards = 5554 stats->stat_IfInFTQDiscards; 5555 5556 sc->stat_IfInMBUFDiscards = 5557 stats->stat_IfInMBUFDiscards; 5558 5559 sc->stat_IfInRuleCheckerP4Hit = 5560 stats->stat_IfInRuleCheckerP4Hit; 5561 5562 sc->stat_CatchupInRuleCheckerDiscards = 5563 stats->stat_CatchupInRuleCheckerDiscards; 5564 5565 sc->stat_CatchupInFTQDiscards = 5566 stats->stat_CatchupInFTQDiscards; 5567 5568 sc->stat_CatchupInMBUFDiscards = 5569 stats->stat_CatchupInMBUFDiscards; 5570 5571 sc->stat_CatchupInRuleCheckerP4Hit = 5572 stats->stat_CatchupInRuleCheckerP4Hit; 5573 5574 DBPRINT(sc, BCE_EXCESSIVE, "Exiting %s()\n", __FUNCTION__); 5575} 5576 5577 5578static void 5579bce_tick_locked(struct bce_softc *sc) 5580{ 5581 struct mii_data *mii = NULL; 5582 struct ifnet *ifp; 5583 u32 msg; 5584 5585 ifp = sc->bce_ifp; 5586 5587 BCE_LOCK_ASSERT(sc); 5588 5589 /* Tell the firmware that the driver is still running. */ 5590#ifdef BCE_DEBUG 5591 msg = (u32) BCE_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE; 5592#else 5593 msg = (u32) ++sc->bce_fw_drv_pulse_wr_seq; 5594#endif 5595 REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_PULSE_MB, msg); 5596 5597 /* Update the statistics from the hardware statistics block. */ 5598 bce_stats_update(sc); 5599 5600 /* Schedule the next tick. */ 5601 callout_reset( 5602 &sc->bce_stat_ch, /* callout */ 5603 hz, /* ticks */ 5604 bce_tick, /* function */ 5605 sc); /* function argument */ 5606 5607 /* If link is up already up then we're done. */ 5608 if (sc->bce_link) 5609 goto bce_tick_locked_exit; 5610 5611 /* DRC - ToDo: Add SerDes support and check SerDes link here. */ 5612 5613 mii = device_get_softc(sc->bce_miibus); 5614 mii_tick(mii); 5615 5616 /* Check if the link has come up. */ 5617 if (!sc->bce_link && mii->mii_media_status & IFM_ACTIVE && 5618 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 5619 sc->bce_link++; 5620 if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T || 5621 IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) && 5622 bootverbose) 5623 BCE_PRINTF(sc, "Gigabit link up\n"); 5624 /* Now that link is up, handle any outstanding TX traffic. */ 5625 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 5626 bce_start_locked(ifp); 5627 } 5628 5629bce_tick_locked_exit: 5630 return; 5631} 5632 5633 5634static void 5635bce_tick(void *xsc) 5636{ 5637 struct bce_softc *sc; 5638 5639 sc = xsc; 5640 5641 BCE_LOCK(sc); 5642 bce_tick_locked(sc); 5643 BCE_UNLOCK(sc); 5644} 5645 5646 5647#ifdef BCE_DEBUG 5648/****************************************************************************/ 5649/* Allows the driver state to be dumped through the sysctl interface. */ 5650/* */ 5651/* Returns: */ 5652/* 0 for success, positive value for failure. */ 5653/****************************************************************************/ 5654static int 5655bce_sysctl_driver_state(SYSCTL_HANDLER_ARGS) 5656{ 5657 int error; 5658 int result; 5659 struct bce_softc *sc; 5660 5661 result = -1; 5662 error = sysctl_handle_int(oidp, &result, 0, req); 5663 5664 if (error || !req->newptr) 5665 return (error); 5666 5667 if (result == 1) { 5668 sc = (struct bce_softc *)arg1; 5669 bce_dump_driver_state(sc); 5670 } 5671 5672 return error; 5673} 5674 5675 5676/****************************************************************************/ 5677/* Allows the hardware state to be dumped through the sysctl interface. */ 5678/* */ 5679/* Returns: */ 5680/* 0 for success, positive value for failure. */ 5681/****************************************************************************/ 5682static int 5683bce_sysctl_hw_state(SYSCTL_HANDLER_ARGS) 5684{ 5685 int error; 5686 int result; 5687 struct bce_softc *sc; 5688 5689 result = -1; 5690 error = sysctl_handle_int(oidp, &result, 0, req); 5691 5692 if (error || !req->newptr) 5693 return (error); 5694 5695 if (result == 1) { 5696 sc = (struct bce_softc *)arg1; 5697 bce_dump_hw_state(sc); 5698 } 5699 5700 return error; 5701} 5702 5703 5704/****************************************************************************/ 5705/* */ 5706/* */ 5707/* Returns: */ 5708/* 0 for success, positive value for failure. */ 5709/****************************************************************************/ 5710static int 5711bce_sysctl_dump_rx_chain(SYSCTL_HANDLER_ARGS) 5712{ 5713 int error; 5714 int result; 5715 struct bce_softc *sc; 5716 5717 result = -1; 5718 error = sysctl_handle_int(oidp, &result, 0, req); 5719 5720 if (error || !req->newptr) 5721 return (error); 5722 5723 if (result == 1) { 5724 sc = (struct bce_softc *)arg1; 5725 bce_dump_rx_chain(sc, 0, USABLE_RX_BD); 5726 } 5727 5728 return error; 5729} 5730 5731 5732/****************************************************************************/ 5733/* */ 5734/* */ 5735/* Returns: */ 5736/* 0 for success, positive value for failure. */ 5737/****************************************************************************/ 5738static int 5739bce_sysctl_breakpoint(SYSCTL_HANDLER_ARGS) 5740{ 5741 int error; 5742 int result; 5743 struct bce_softc *sc; 5744 5745 result = -1; 5746 error = sysctl_handle_int(oidp, &result, 0, req); 5747 5748 if (error || !req->newptr) 5749 return (error); 5750 5751 if (result == 1) { 5752 sc = (struct bce_softc *)arg1; 5753 bce_breakpoint(sc); 5754 } 5755 5756 return error; 5757} 5758#endif 5759 5760 5761/****************************************************************************/ 5762/* Adds any sysctl parameters for tuning or debugging purposes. */ 5763/* */ 5764/* Returns: */ 5765/* 0 for success, positive value for failure. */ 5766/****************************************************************************/ 5767static void 5768bce_add_sysctls(struct bce_softc *sc) 5769{ 5770 struct sysctl_ctx_list *ctx; 5771 struct sysctl_oid_list *children; 5772 5773 ctx = device_get_sysctl_ctx(sc->bce_dev); 5774 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bce_dev)); 5775 5776 SYSCTL_ADD_STRING(ctx, children, OID_AUTO, 5777 "driver_version", 5778 CTLFLAG_RD, &bce_driver_version, 5779 0, "bce driver version"); 5780 5781#ifdef BCE_DEBUG 5782 SYSCTL_ADD_INT(ctx, children, OID_AUTO, 5783 "rx_low_watermark", 5784 CTLFLAG_RD, &sc->rx_low_watermark, 5785 0, "Lowest level of free rx_bd's"); 5786 5787 SYSCTL_ADD_INT(ctx, children, OID_AUTO, 5788 "tx_hi_watermark", 5789 CTLFLAG_RD, &sc->tx_hi_watermark, 5790 0, "Highest level of used tx_bd's"); 5791 5792 SYSCTL_ADD_INT(ctx, children, OID_AUTO, 5793 "l2fhdr_status_errors", 5794 CTLFLAG_RD, &sc->l2fhdr_status_errors, 5795 0, "l2_fhdr status errors"); 5796 5797 SYSCTL_ADD_INT(ctx, children, OID_AUTO, 5798 "unexpected_attentions", 5799 CTLFLAG_RD, &sc->unexpected_attentions, 5800 0, "unexpected attentions"); 5801 5802 SYSCTL_ADD_INT(ctx, children, OID_AUTO, 5803 "lost_status_block_updates", 5804 CTLFLAG_RD, &sc->lost_status_block_updates, 5805 0, "lost status block updates"); 5806 5807 SYSCTL_ADD_INT(ctx, children, OID_AUTO, 5808 "mbuf_alloc_failed", 5809 CTLFLAG_RD, &sc->mbuf_alloc_failed, 5810 0, "mbuf cluster allocation failures"); 5811#endif 5812 5813 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5814 "stat_IfHcInOctets", 5815 CTLFLAG_RD, &sc->stat_IfHCInOctets, 5816 "Bytes received"); 5817 5818 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5819 "stat_IfHCInBadOctets", 5820 CTLFLAG_RD, &sc->stat_IfHCInBadOctets, 5821 "Bad bytes received"); 5822 5823 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5824 "stat_IfHCOutOctets", 5825 CTLFLAG_RD, &sc->stat_IfHCOutOctets, 5826 "Bytes sent"); 5827 5828 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5829 "stat_IfHCOutBadOctets", 5830 CTLFLAG_RD, &sc->stat_IfHCOutBadOctets, 5831 "Bad bytes sent"); 5832 5833 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5834 "stat_IfHCInUcastPkts", 5835 CTLFLAG_RD, &sc->stat_IfHCInUcastPkts, 5836 "Unicast packets received"); 5837 5838 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5839 "stat_IfHCInMulticastPkts", 5840 CTLFLAG_RD, &sc->stat_IfHCInMulticastPkts, 5841 "Multicast packets received"); 5842 5843 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5844 "stat_IfHCInBroadcastPkts", 5845 CTLFLAG_RD, &sc->stat_IfHCInBroadcastPkts, 5846 "Broadcast packets received"); 5847 5848 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5849 "stat_IfHCOutUcastPkts", 5850 CTLFLAG_RD, &sc->stat_IfHCOutUcastPkts, 5851 "Unicast packets sent"); 5852 5853 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5854 "stat_IfHCOutMulticastPkts", 5855 CTLFLAG_RD, &sc->stat_IfHCOutMulticastPkts, 5856 "Multicast packets sent"); 5857 5858 SYSCTL_ADD_ULONG(ctx, children, OID_AUTO, 5859 "stat_IfHCOutBroadcastPkts", 5860 CTLFLAG_RD, &sc->stat_IfHCOutBroadcastPkts, 5861 "Broadcast packets sent"); 5862 5863 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5864 "stat_emac_tx_stat_dot3statsinternalmactransmiterrors", 5865 CTLFLAG_RD, &sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors, 5866 0, "Internal MAC transmit errors"); 5867 5868 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5869 "stat_Dot3StatsCarrierSenseErrors", 5870 CTLFLAG_RD, &sc->stat_Dot3StatsCarrierSenseErrors, 5871 0, "Carrier sense errors"); 5872 5873 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5874 "stat_Dot3StatsFCSErrors", 5875 CTLFLAG_RD, &sc->stat_Dot3StatsFCSErrors, 5876 0, "Frame check sequence errors"); 5877 5878 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5879 "stat_Dot3StatsAlignmentErrors", 5880 CTLFLAG_RD, &sc->stat_Dot3StatsAlignmentErrors, 5881 0, "Alignment errors"); 5882 5883 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5884 "stat_Dot3StatsSingleCollisionFrames", 5885 CTLFLAG_RD, &sc->stat_Dot3StatsSingleCollisionFrames, 5886 0, "Single Collision Frames"); 5887 5888 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5889 "stat_Dot3StatsMultipleCollisionFrames", 5890 CTLFLAG_RD, &sc->stat_Dot3StatsMultipleCollisionFrames, 5891 0, "Multiple Collision Frames"); 5892 5893 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5894 "stat_Dot3StatsDeferredTransmissions", 5895 CTLFLAG_RD, &sc->stat_Dot3StatsDeferredTransmissions, 5896 0, "Deferred Transmissions"); 5897 5898 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5899 "stat_Dot3StatsExcessiveCollisions", 5900 CTLFLAG_RD, &sc->stat_Dot3StatsExcessiveCollisions, 5901 0, "Excessive Collisions"); 5902 5903 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5904 "stat_Dot3StatsLateCollisions", 5905 CTLFLAG_RD, &sc->stat_Dot3StatsLateCollisions, 5906 0, "Late Collisions"); 5907 5908 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5909 "stat_EtherStatsCollisions", 5910 CTLFLAG_RD, &sc->stat_EtherStatsCollisions, 5911 0, "Collisions"); 5912 5913 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5914 "stat_EtherStatsFragments", 5915 CTLFLAG_RD, &sc->stat_EtherStatsFragments, 5916 0, "Fragments"); 5917 5918 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5919 "stat_EtherStatsJabbers", 5920 CTLFLAG_RD, &sc->stat_EtherStatsJabbers, 5921 0, "Jabbers"); 5922 5923 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5924 "stat_EtherStatsUndersizePkts", 5925 CTLFLAG_RD, &sc->stat_EtherStatsUndersizePkts, 5926 0, "Undersize packets"); 5927 5928 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5929 "stat_EtherStatsOverrsizePkts", 5930 CTLFLAG_RD, &sc->stat_EtherStatsOverrsizePkts, 5931 0, "stat_EtherStatsOverrsizePkts"); 5932 5933 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5934 "stat_EtherStatsPktsRx64Octets", 5935 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx64Octets, 5936 0, "Bytes received in 64 byte packets"); 5937 5938 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5939 "stat_EtherStatsPktsRx65Octetsto127Octets", 5940 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx65Octetsto127Octets, 5941 0, "Bytes received in 65 to 127 byte packets"); 5942 5943 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5944 "stat_EtherStatsPktsRx128Octetsto255Octets", 5945 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx128Octetsto255Octets, 5946 0, "Bytes received in 128 to 255 byte packets"); 5947 5948 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5949 "stat_EtherStatsPktsRx256Octetsto511Octets", 5950 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx256Octetsto511Octets, 5951 0, "Bytes received in 256 to 511 byte packets"); 5952 5953 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5954 "stat_EtherStatsPktsRx512Octetsto1023Octets", 5955 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx512Octetsto1023Octets, 5956 0, "Bytes received in 512 to 1023 byte packets"); 5957 5958 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5959 "stat_EtherStatsPktsRx1024Octetsto1522Octets", 5960 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1024Octetsto1522Octets, 5961 0, "Bytes received in 1024 t0 1522 byte packets"); 5962 5963 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5964 "stat_EtherStatsPktsRx1523Octetsto9022Octets", 5965 CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1523Octetsto9022Octets, 5966 0, "Bytes received in 1523 to 9022 byte packets"); 5967 5968 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5969 "stat_EtherStatsPktsTx64Octets", 5970 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx64Octets, 5971 0, "Bytes sent in 64 byte packets"); 5972 5973 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5974 "stat_EtherStatsPktsTx65Octetsto127Octets", 5975 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx65Octetsto127Octets, 5976 0, "Bytes sent in 65 to 127 byte packets"); 5977 5978 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5979 "stat_EtherStatsPktsTx128Octetsto255Octets", 5980 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx128Octetsto255Octets, 5981 0, "Bytes sent in 128 to 255 byte packets"); 5982 5983 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5984 "stat_EtherStatsPktsTx256Octetsto511Octets", 5985 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx256Octetsto511Octets, 5986 0, "Bytes sent in 256 to 511 byte packets"); 5987 5988 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5989 "stat_EtherStatsPktsTx512Octetsto1023Octets", 5990 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx512Octetsto1023Octets, 5991 0, "Bytes sent in 512 to 1023 byte packets"); 5992 5993 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5994 "stat_EtherStatsPktsTx1024Octetsto1522Octets", 5995 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1024Octetsto1522Octets, 5996 0, "Bytes sent in 1024 to 1522 byte packets"); 5997 5998 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 5999 "stat_EtherStatsPktsTx1523Octetsto9022Octets", 6000 CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1523Octetsto9022Octets, 6001 0, "Bytes sent in 1523 to 9022 byte packets"); 6002 6003 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6004 "stat_XonPauseFramesReceived", 6005 CTLFLAG_RD, &sc->stat_XonPauseFramesReceived, 6006 0, "XON pause frames receved"); 6007 6008 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6009 "stat_XoffPauseFramesReceived", 6010 CTLFLAG_RD, &sc->stat_XoffPauseFramesReceived, 6011 0, "XOFF pause frames received"); 6012 6013 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6014 "stat_OutXonSent", 6015 CTLFLAG_RD, &sc->stat_OutXonSent, 6016 0, "XON pause frames sent"); 6017 6018 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6019 "stat_OutXoffSent", 6020 CTLFLAG_RD, &sc->stat_OutXoffSent, 6021 0, "XOFF pause frames sent"); 6022 6023 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6024 "stat_FlowControlDone", 6025 CTLFLAG_RD, &sc->stat_FlowControlDone, 6026 0, "Flow control done"); 6027 6028 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6029 "stat_MacControlFramesReceived", 6030 CTLFLAG_RD, &sc->stat_MacControlFramesReceived, 6031 0, "MAC control frames received"); 6032 6033 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6034 "stat_XoffStateEntered", 6035 CTLFLAG_RD, &sc->stat_XoffStateEntered, 6036 0, "XOFF state entered"); 6037 6038 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6039 "stat_IfInFramesL2FilterDiscards", 6040 CTLFLAG_RD, &sc->stat_IfInFramesL2FilterDiscards, 6041 0, "Received L2 packets discarded"); 6042 6043 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6044 "stat_IfInRuleCheckerDiscards", 6045 CTLFLAG_RD, &sc->stat_IfInRuleCheckerDiscards, 6046 0, "Received packets discarded by rule"); 6047 6048 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6049 "stat_IfInFTQDiscards", 6050 CTLFLAG_RD, &sc->stat_IfInFTQDiscards, 6051 0, "Received packet FTQ discards"); 6052 6053 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6054 "stat_IfInMBUFDiscards", 6055 CTLFLAG_RD, &sc->stat_IfInMBUFDiscards, 6056 0, "Received packets discarded due to lack of controller buffer memory"); 6057 6058 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6059 "stat_IfInRuleCheckerP4Hit", 6060 CTLFLAG_RD, &sc->stat_IfInRuleCheckerP4Hit, 6061 0, "Received packets rule checker hits"); 6062 6063 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6064 "stat_CatchupInRuleCheckerDiscards", 6065 CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerDiscards, 6066 0, "Received packets discarded in Catchup path"); 6067 6068 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6069 "stat_CatchupInFTQDiscards", 6070 CTLFLAG_RD, &sc->stat_CatchupInFTQDiscards, 6071 0, "Received packets discarded in FTQ in Catchup path"); 6072 6073 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6074 "stat_CatchupInMBUFDiscards", 6075 CTLFLAG_RD, &sc->stat_CatchupInMBUFDiscards, 6076 0, "Received packets discarded in controller buffer memory in Catchup path"); 6077 6078 SYSCTL_ADD_UINT(ctx, children, OID_AUTO, 6079 "stat_CatchupInRuleCheckerP4Hit", 6080 CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerP4Hit, 6081 0, "Received packets rule checker hits in Catchup path"); 6082 6083#ifdef BCE_DEBUG 6084 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, 6085 "driver_state", CTLTYPE_INT | CTLFLAG_RW, 6086 (void *)sc, 0, 6087 bce_sysctl_driver_state, "I", "Drive state information"); 6088 6089 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, 6090 "hw_state", CTLTYPE_INT | CTLFLAG_RW, 6091 (void *)sc, 0, 6092 bce_sysctl_hw_state, "I", "Hardware state information"); 6093 6094 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, 6095 "dump_rx_chain", CTLTYPE_INT | CTLFLAG_RW, 6096 (void *)sc, 0, 6097 bce_sysctl_dump_rx_chain, "I", "Dump rx_bd chain"); 6098 6099 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, 6100 "breakpoint", CTLTYPE_INT | CTLFLAG_RW, 6101 (void *)sc, 0, 6102 bce_sysctl_breakpoint, "I", "Driver breakpoint"); 6103#endif 6104 6105} 6106 6107 6108/****************************************************************************/ 6109/* BCE Debug Routines */ 6110/****************************************************************************/ 6111#ifdef BCE_DEBUG 6112 6113/****************************************************************************/ 6114/* Prints out information about an mbuf. */ 6115/* */ 6116/* Returns: */ 6117/* Nothing. */ 6118/****************************************************************************/ 6119static void 6120bce_dump_mbuf(struct bce_softc *sc, struct mbuf *m) 6121{ 6122 u32 val_hi, val_lo; 6123 struct mbuf *mp = m; 6124 6125 if (m == NULL) { 6126 /* Index out of range. */ 6127 printf("mbuf ptr is null!\n"); 6128 return; 6129 } 6130 6131 while (mp) { 6132 val_hi = BCE_ADDR_HI(mp); 6133 val_lo = BCE_ADDR_LO(mp); 6134 BCE_PRINTF(sc, "mbuf: vaddr = 0x%08X:%08X, m_len = %d, m_flags = ", 6135 val_hi, val_lo, mp->m_len); 6136 6137 if (mp->m_flags & M_EXT) 6138 printf("M_EXT "); 6139 if (mp->m_flags & M_PKTHDR) 6140 printf("M_PKTHDR "); 6141 printf("\n"); 6142 6143 if (mp->m_flags & M_EXT) { 6144 val_hi = BCE_ADDR_HI(mp->m_ext.ext_buf); 6145 val_lo = BCE_ADDR_LO(mp->m_ext.ext_buf); 6146 BCE_PRINTF(sc, "- m_ext: vaddr = 0x%08X:%08X, ext_size = 0x%04X\n", 6147 val_hi, val_lo, mp->m_ext.ext_size); 6148 } 6149 6150 mp = mp->m_next; 6151 } 6152 6153 6154} 6155 6156 6157/****************************************************************************/ 6158/* Prints out the mbufs in the TX mbuf chain. */ 6159/* */ 6160/* Returns: */ 6161/* Nothing. */ 6162/****************************************************************************/ 6163static void 6164bce_dump_tx_mbuf_chain(struct bce_softc *sc, int chain_prod, int count) 6165{ 6166 struct mbuf *m; 6167 6168 BCE_PRINTF(sc, 6169 "----------------------------" 6170 " tx mbuf data " 6171 "----------------------------\n"); 6172 6173 for (int i = 0; i < count; i++) { 6174 m = sc->tx_mbuf_ptr[chain_prod]; 6175 BCE_PRINTF(sc, "txmbuf[%d]\n", chain_prod); 6176 bce_dump_mbuf(sc, m); 6177 chain_prod = TX_CHAIN_IDX(NEXT_TX_BD(chain_prod)); 6178 } 6179 6180 BCE_PRINTF(sc, 6181 "----------------------------" 6182 "----------------" 6183 "----------------------------\n"); 6184} 6185 6186 6187/* 6188 * This routine prints the RX mbuf chain. 6189 */ 6190static void 6191bce_dump_rx_mbuf_chain(struct bce_softc *sc, int chain_prod, int count) 6192{ 6193 struct mbuf *m; 6194 6195 BCE_PRINTF(sc, 6196 "----------------------------" 6197 " rx mbuf data " 6198 "----------------------------\n"); 6199 6200 for (int i = 0; i < count; i++) { 6201 m = sc->rx_mbuf_ptr[chain_prod]; 6202 BCE_PRINTF(sc, "rxmbuf[0x%04X]\n", chain_prod); 6203 bce_dump_mbuf(sc, m); 6204 chain_prod = RX_CHAIN_IDX(NEXT_RX_BD(chain_prod)); 6205 } 6206 6207 6208 BCE_PRINTF(sc, 6209 "----------------------------" 6210 "----------------" 6211 "----------------------------\n"); 6212} 6213 6214 6215static void 6216bce_dump_txbd(struct bce_softc *sc, int idx, struct tx_bd *txbd) 6217{ 6218 if (idx > MAX_TX_BD) 6219 /* Index out of range. */ 6220 BCE_PRINTF(sc, "tx_bd[0x%04X]: Invalid tx_bd index!\n", idx); 6221 else if ((idx & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE) 6222 /* TX Chain page pointer. */ 6223 BCE_PRINTF(sc, "tx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n", 6224 idx, txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo); 6225 else 6226 /* Normal tx_bd entry. */ 6227 BCE_PRINTF(sc, "tx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, " 6228 "flags = 0x%08X\n", idx, 6229 txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo, 6230 txbd->tx_bd_mss_nbytes, txbd->tx_bd_vlan_tag_flags); 6231} 6232 6233 6234static void 6235bce_dump_rxbd(struct bce_softc *sc, int idx, struct rx_bd *rxbd) 6236{ 6237 if (idx > MAX_RX_BD) 6238 /* Index out of range. */ 6239 BCE_PRINTF(sc, "rx_bd[0x%04X]: Invalid rx_bd index!\n", idx); 6240 else if ((idx & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE) 6241 /* TX Chain page pointer. */ 6242 BCE_PRINTF(sc, "rx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n", 6243 idx, rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo); 6244 else 6245 /* Normal tx_bd entry. */ 6246 BCE_PRINTF(sc, "rx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, " 6247 "flags = 0x%08X\n", idx, 6248 rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo, 6249 rxbd->rx_bd_len, rxbd->rx_bd_flags); 6250} 6251 6252 6253static void 6254bce_dump_l2fhdr(struct bce_softc *sc, int idx, struct l2_fhdr *l2fhdr) 6255{ 6256 BCE_PRINTF(sc, "l2_fhdr[0x%04X]: status = 0x%08X, " 6257 "pkt_len = 0x%04X, vlan = 0x%04x, ip_xsum = 0x%04X, " 6258 "tcp_udp_xsum = 0x%04X\n", idx, 6259 l2fhdr->l2_fhdr_status, l2fhdr->l2_fhdr_pkt_len, 6260 l2fhdr->l2_fhdr_vlan_tag, l2fhdr->l2_fhdr_ip_xsum, 6261 l2fhdr->l2_fhdr_tcp_udp_xsum); 6262} 6263 6264 6265/* 6266 * This routine prints the TX chain. 6267 */ 6268static void 6269bce_dump_tx_chain(struct bce_softc *sc, int tx_prod, int count) 6270{ 6271 struct tx_bd *txbd; 6272 6273 /* First some info about the tx_bd chain structure. */ 6274 BCE_PRINTF(sc, 6275 "----------------------------" 6276 " tx_bd chain " 6277 "----------------------------\n"); 6278 6279 BCE_PRINTF(sc, "page size = 0x%08X, tx chain pages = 0x%08X\n", 6280 (u32) BCM_PAGE_SIZE, (u32) TX_PAGES); 6281 6282 BCE_PRINTF(sc, "tx_bd per page = 0x%08X, usable tx_bd per page = 0x%08X\n", 6283 (u32) TOTAL_TX_BD_PER_PAGE, (u32) USABLE_TX_BD_PER_PAGE); 6284 6285 BCE_PRINTF(sc, "total tx_bd = 0x%08X\n", (u32) TOTAL_TX_BD); 6286 6287 BCE_PRINTF(sc, "" 6288 "-----------------------------" 6289 " tx_bd data " 6290 "-----------------------------\n"); 6291 6292 /* Now print out the tx_bd's themselves. */ 6293 for (int i = 0; i < count; i++) { 6294 txbd = &sc->tx_bd_chain[TX_PAGE(tx_prod)][TX_IDX(tx_prod)]; 6295 bce_dump_txbd(sc, tx_prod, txbd); 6296 tx_prod = TX_CHAIN_IDX(NEXT_TX_BD(tx_prod)); 6297 } 6298 6299 BCE_PRINTF(sc, 6300 "-----------------------------" 6301 "--------------" 6302 "-----------------------------\n"); 6303} 6304 6305 6306/* 6307 * This routine prints the RX chain. 6308 */ 6309static void 6310bce_dump_rx_chain(struct bce_softc *sc, int rx_prod, int count) 6311{ 6312 struct rx_bd *rxbd; 6313 6314 /* First some info about the tx_bd chain structure. */ 6315 BCE_PRINTF(sc, 6316 "----------------------------" 6317 " rx_bd chain " 6318 "----------------------------\n"); 6319 6320 BCE_PRINTF(sc, "----- RX_BD Chain -----\n"); 6321 6322 BCE_PRINTF(sc, "page size = 0x%08X, rx chain pages = 0x%08X\n", 6323 (u32) BCM_PAGE_SIZE, (u32) RX_PAGES); 6324 6325 BCE_PRINTF(sc, "rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n", 6326 (u32) TOTAL_RX_BD_PER_PAGE, (u32) USABLE_RX_BD_PER_PAGE); 6327 6328 BCE_PRINTF(sc, "total rx_bd = 0x%08X\n", (u32) TOTAL_RX_BD); 6329 6330 BCE_PRINTF(sc, 6331 "----------------------------" 6332 " rx_bd data " 6333 "----------------------------\n"); 6334 6335 /* Now print out the rx_bd's themselves. */ 6336 for (int i = 0; i < count; i++) { 6337 rxbd = &sc->rx_bd_chain[RX_PAGE(rx_prod)][RX_IDX(rx_prod)]; 6338 bce_dump_rxbd(sc, rx_prod, rxbd); 6339 rx_prod = RX_CHAIN_IDX(NEXT_RX_BD(rx_prod)); 6340 } 6341 6342 BCE_PRINTF(sc, 6343 "----------------------------" 6344 "--------------" 6345 "----------------------------\n"); 6346} 6347 6348 6349/* 6350 * This routine prints the status block. 6351 */ 6352static void 6353bce_dump_status_block(struct bce_softc *sc) 6354{ 6355 struct status_block *sblk; 6356 6357 sblk = sc->status_block; 6358 6359 BCE_PRINTF(sc, "----------------------------- Status Block " 6360 "-----------------------------\n"); 6361 6362 BCE_PRINTF(sc, "attn_bits = 0x%08X, attn_bits_ack = 0x%08X, index = 0x%04X\n", 6363 sblk->status_attn_bits, sblk->status_attn_bits_ack, 6364 sblk->status_idx); 6365 6366 BCE_PRINTF(sc, "rx_cons0 = 0x%08X, tx_cons0 = 0x%08X\n", 6367 sblk->status_rx_quick_consumer_index0, 6368 sblk->status_tx_quick_consumer_index0); 6369 6370 BCE_PRINTF(sc, "status_idx = 0x%04X\n", sblk->status_idx); 6371 6372 /* Theses indices are not used for normal L2 drivers. */ 6373 if (sblk->status_rx_quick_consumer_index1 || 6374 sblk->status_tx_quick_consumer_index1) 6375 BCE_PRINTF(sc, "rx_cons1 = 0x%08X, tx_cons1 = 0x%08X\n", 6376 sblk->status_rx_quick_consumer_index1, 6377 sblk->status_tx_quick_consumer_index1); 6378 6379 if (sblk->status_rx_quick_consumer_index2 || 6380 sblk->status_tx_quick_consumer_index2) 6381 BCE_PRINTF(sc, "rx_cons2 = 0x%08X, tx_cons2 = 0x%08X\n", 6382 sblk->status_rx_quick_consumer_index2, 6383 sblk->status_tx_quick_consumer_index2); 6384 6385 if (sblk->status_rx_quick_consumer_index3 || 6386 sblk->status_tx_quick_consumer_index3) 6387 BCE_PRINTF(sc, "rx_cons3 = 0x%08X, tx_cons3 = 0x%08X\n", 6388 sblk->status_rx_quick_consumer_index3, 6389 sblk->status_tx_quick_consumer_index3); 6390 6391 if (sblk->status_rx_quick_consumer_index4 || 6392 sblk->status_rx_quick_consumer_index5) 6393 BCE_PRINTF(sc, "rx_cons4 = 0x%08X, rx_cons5 = 0x%08X\n", 6394 sblk->status_rx_quick_consumer_index4, 6395 sblk->status_rx_quick_consumer_index5); 6396 6397 if (sblk->status_rx_quick_consumer_index6 || 6398 sblk->status_rx_quick_consumer_index7) 6399 BCE_PRINTF(sc, "rx_cons6 = 0x%08X, rx_cons7 = 0x%08X\n", 6400 sblk->status_rx_quick_consumer_index6, 6401 sblk->status_rx_quick_consumer_index7); 6402 6403 if (sblk->status_rx_quick_consumer_index8 || 6404 sblk->status_rx_quick_consumer_index9) 6405 BCE_PRINTF(sc, "rx_cons8 = 0x%08X, rx_cons9 = 0x%08X\n", 6406 sblk->status_rx_quick_consumer_index8, 6407 sblk->status_rx_quick_consumer_index9); 6408 6409 if (sblk->status_rx_quick_consumer_index10 || 6410 sblk->status_rx_quick_consumer_index11) 6411 BCE_PRINTF(sc, "rx_cons10 = 0x%08X, rx_cons11 = 0x%08X\n", 6412 sblk->status_rx_quick_consumer_index10, 6413 sblk->status_rx_quick_consumer_index11); 6414 6415 if (sblk->status_rx_quick_consumer_index12 || 6416 sblk->status_rx_quick_consumer_index13) 6417 BCE_PRINTF(sc, "rx_cons12 = 0x%08X, rx_cons13 = 0x%08X\n", 6418 sblk->status_rx_quick_consumer_index12, 6419 sblk->status_rx_quick_consumer_index13); 6420 6421 if (sblk->status_rx_quick_consumer_index14 || 6422 sblk->status_rx_quick_consumer_index15) 6423 BCE_PRINTF(sc, "rx_cons14 = 0x%08X, rx_cons15 = 0x%08X\n", 6424 sblk->status_rx_quick_consumer_index14, 6425 sblk->status_rx_quick_consumer_index15); 6426 6427 if (sblk->status_completion_producer_index || 6428 sblk->status_cmd_consumer_index) 6429 BCE_PRINTF(sc, "com_prod = 0x%08X, cmd_cons = 0x%08X\n", 6430 sblk->status_completion_producer_index, 6431 sblk->status_cmd_consumer_index); 6432 6433 BCE_PRINTF(sc, "-------------------------------------------" 6434 "-----------------------------\n"); 6435} 6436 6437 6438/* 6439 * This routine prints the statistics block. 6440 */ 6441static void 6442bce_dump_stats_block(struct bce_softc *sc) 6443{ 6444 struct statistics_block *sblk; 6445 6446 sblk = sc->stats_block; 6447 6448 BCE_PRINTF(sc, "" 6449 "-----------------------------" 6450 " Stats Block " 6451 "-----------------------------\n"); 6452 6453 BCE_PRINTF(sc, "IfHcInOctets = 0x%08X:%08X, " 6454 "IfHcInBadOctets = 0x%08X:%08X\n", 6455 sblk->stat_IfHCInOctets_hi, sblk->stat_IfHCInOctets_lo, 6456 sblk->stat_IfHCInBadOctets_hi, sblk->stat_IfHCInBadOctets_lo); 6457 6458 BCE_PRINTF(sc, "IfHcOutOctets = 0x%08X:%08X, " 6459 "IfHcOutBadOctets = 0x%08X:%08X\n", 6460 sblk->stat_IfHCOutOctets_hi, sblk->stat_IfHCOutOctets_lo, 6461 sblk->stat_IfHCOutBadOctets_hi, sblk->stat_IfHCOutBadOctets_lo); 6462 6463 BCE_PRINTF(sc, "IfHcInUcastPkts = 0x%08X:%08X, " 6464 "IfHcInMulticastPkts = 0x%08X:%08X\n", 6465 sblk->stat_IfHCInUcastPkts_hi, sblk->stat_IfHCInUcastPkts_lo, 6466 sblk->stat_IfHCInMulticastPkts_hi, sblk->stat_IfHCInMulticastPkts_lo); 6467 6468 BCE_PRINTF(sc, "IfHcInBroadcastPkts = 0x%08X:%08X, " 6469 "IfHcOutUcastPkts = 0x%08X:%08X\n", 6470 sblk->stat_IfHCInBroadcastPkts_hi, sblk->stat_IfHCInBroadcastPkts_lo, 6471 sblk->stat_IfHCOutUcastPkts_hi, sblk->stat_IfHCOutUcastPkts_lo); 6472 6473 BCE_PRINTF(sc, "IfHcOutMulticastPkts = 0x%08X:%08X, IfHcOutBroadcastPkts = 0x%08X:%08X\n", 6474 sblk->stat_IfHCOutMulticastPkts_hi, sblk->stat_IfHCOutMulticastPkts_lo, 6475 sblk->stat_IfHCOutBroadcastPkts_hi, sblk->stat_IfHCOutBroadcastPkts_lo); 6476 6477 if (sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors) 6478 BCE_PRINTF(sc, "0x%08X : " 6479 "emac_tx_stat_dot3statsinternalmactransmiterrors\n", 6480 sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors); 6481 6482 if (sblk->stat_Dot3StatsCarrierSenseErrors) 6483 BCE_PRINTF(sc, "0x%08X : Dot3StatsCarrierSenseErrors\n", 6484 sblk->stat_Dot3StatsCarrierSenseErrors); 6485 6486 if (sblk->stat_Dot3StatsFCSErrors) 6487 BCE_PRINTF(sc, "0x%08X : Dot3StatsFCSErrors\n", 6488 sblk->stat_Dot3StatsFCSErrors); 6489 6490 if (sblk->stat_Dot3StatsAlignmentErrors) 6491 BCE_PRINTF(sc, "0x%08X : Dot3StatsAlignmentErrors\n", 6492 sblk->stat_Dot3StatsAlignmentErrors); 6493 6494 if (sblk->stat_Dot3StatsSingleCollisionFrames) 6495 BCE_PRINTF(sc, "0x%08X : Dot3StatsSingleCollisionFrames\n", 6496 sblk->stat_Dot3StatsSingleCollisionFrames); 6497 6498 if (sblk->stat_Dot3StatsMultipleCollisionFrames) 6499 BCE_PRINTF(sc, "0x%08X : Dot3StatsMultipleCollisionFrames\n", 6500 sblk->stat_Dot3StatsMultipleCollisionFrames); 6501 6502 if (sblk->stat_Dot3StatsDeferredTransmissions) 6503 BCE_PRINTF(sc, "0x%08X : Dot3StatsDeferredTransmissions\n", 6504 sblk->stat_Dot3StatsDeferredTransmissions); 6505 6506 if (sblk->stat_Dot3StatsExcessiveCollisions) 6507 BCE_PRINTF(sc, "0x%08X : Dot3StatsExcessiveCollisions\n", 6508 sblk->stat_Dot3StatsExcessiveCollisions); 6509 6510 if (sblk->stat_Dot3StatsLateCollisions) 6511 BCE_PRINTF(sc, "0x%08X : Dot3StatsLateCollisions\n", 6512 sblk->stat_Dot3StatsLateCollisions); 6513 6514 if (sblk->stat_EtherStatsCollisions) 6515 BCE_PRINTF(sc, "0x%08X : EtherStatsCollisions\n", 6516 sblk->stat_EtherStatsCollisions); 6517 6518 if (sblk->stat_EtherStatsFragments) 6519 BCE_PRINTF(sc, "0x%08X : EtherStatsFragments\n", 6520 sblk->stat_EtherStatsFragments); 6521 6522 if (sblk->stat_EtherStatsJabbers) 6523 BCE_PRINTF(sc, "0x%08X : EtherStatsJabbers\n", 6524 sblk->stat_EtherStatsJabbers); 6525 6526 if (sblk->stat_EtherStatsUndersizePkts) 6527 BCE_PRINTF(sc, "0x%08X : EtherStatsUndersizePkts\n", 6528 sblk->stat_EtherStatsUndersizePkts); 6529 6530 if (sblk->stat_EtherStatsOverrsizePkts) 6531 BCE_PRINTF(sc, "0x%08X : EtherStatsOverrsizePkts\n", 6532 sblk->stat_EtherStatsOverrsizePkts); 6533 6534 if (sblk->stat_EtherStatsPktsRx64Octets) 6535 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx64Octets\n", 6536 sblk->stat_EtherStatsPktsRx64Octets); 6537 6538 if (sblk->stat_EtherStatsPktsRx65Octetsto127Octets) 6539 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx65Octetsto127Octets\n", 6540 sblk->stat_EtherStatsPktsRx65Octetsto127Octets); 6541 6542 if (sblk->stat_EtherStatsPktsRx128Octetsto255Octets) 6543 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx128Octetsto255Octets\n", 6544 sblk->stat_EtherStatsPktsRx128Octetsto255Octets); 6545 6546 if (sblk->stat_EtherStatsPktsRx256Octetsto511Octets) 6547 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx256Octetsto511Octets\n", 6548 sblk->stat_EtherStatsPktsRx256Octetsto511Octets); 6549 6550 if (sblk->stat_EtherStatsPktsRx512Octetsto1023Octets) 6551 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx512Octetsto1023Octets\n", 6552 sblk->stat_EtherStatsPktsRx512Octetsto1023Octets); 6553 6554 if (sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets) 6555 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx1024Octetsto1522Octets\n", 6556 sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets); 6557 6558 if (sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets) 6559 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx1523Octetsto9022Octets\n", 6560 sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets); 6561 6562 if (sblk->stat_EtherStatsPktsTx64Octets) 6563 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx64Octets\n", 6564 sblk->stat_EtherStatsPktsTx64Octets); 6565 6566 if (sblk->stat_EtherStatsPktsTx65Octetsto127Octets) 6567 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx65Octetsto127Octets\n", 6568 sblk->stat_EtherStatsPktsTx65Octetsto127Octets); 6569 6570 if (sblk->stat_EtherStatsPktsTx128Octetsto255Octets) 6571 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx128Octetsto255Octets\n", 6572 sblk->stat_EtherStatsPktsTx128Octetsto255Octets); 6573 6574 if (sblk->stat_EtherStatsPktsTx256Octetsto511Octets) 6575 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx256Octetsto511Octets\n", 6576 sblk->stat_EtherStatsPktsTx256Octetsto511Octets); 6577 6578 if (sblk->stat_EtherStatsPktsTx512Octetsto1023Octets) 6579 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx512Octetsto1023Octets\n", 6580 sblk->stat_EtherStatsPktsTx512Octetsto1023Octets); 6581 6582 if (sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets) 6583 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx1024Octetsto1522Octets\n", 6584 sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets); 6585 6586 if (sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets) 6587 BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx1523Octetsto9022Octets\n", 6588 sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets); 6589 6590 if (sblk->stat_XonPauseFramesReceived) 6591 BCE_PRINTF(sc, "0x%08X : XonPauseFramesReceived\n", 6592 sblk->stat_XonPauseFramesReceived); 6593 6594 if (sblk->stat_XoffPauseFramesReceived) 6595 BCE_PRINTF(sc, "0x%08X : XoffPauseFramesReceived\n", 6596 sblk->stat_XoffPauseFramesReceived); 6597 6598 if (sblk->stat_OutXonSent) 6599 BCE_PRINTF(sc, "0x%08X : OutXonSent\n", 6600 sblk->stat_OutXonSent); 6601 6602 if (sblk->stat_OutXoffSent) 6603 BCE_PRINTF(sc, "0x%08X : OutXoffSent\n", 6604 sblk->stat_OutXoffSent); 6605 6606 if (sblk->stat_FlowControlDone) 6607 BCE_PRINTF(sc, "0x%08X : FlowControlDone\n", 6608 sblk->stat_FlowControlDone); 6609 6610 if (sblk->stat_MacControlFramesReceived) 6611 BCE_PRINTF(sc, "0x%08X : MacControlFramesReceived\n", 6612 sblk->stat_MacControlFramesReceived); 6613 6614 if (sblk->stat_XoffStateEntered) 6615 BCE_PRINTF(sc, "0x%08X : XoffStateEntered\n", 6616 sblk->stat_XoffStateEntered); 6617 6618 if (sblk->stat_IfInFramesL2FilterDiscards) 6619 BCE_PRINTF(sc, "0x%08X : IfInFramesL2FilterDiscards\n", 6620 sblk->stat_IfInFramesL2FilterDiscards); 6621 6622 if (sblk->stat_IfInRuleCheckerDiscards) 6623 BCE_PRINTF(sc, "0x%08X : IfInRuleCheckerDiscards\n", 6624 sblk->stat_IfInRuleCheckerDiscards); 6625 6626 if (sblk->stat_IfInFTQDiscards) 6627 BCE_PRINTF(sc, "0x%08X : IfInFTQDiscards\n", 6628 sblk->stat_IfInFTQDiscards); 6629 6630 if (sblk->stat_IfInMBUFDiscards) 6631 BCE_PRINTF(sc, "0x%08X : IfInMBUFDiscards\n", 6632 sblk->stat_IfInMBUFDiscards); 6633 6634 if (sblk->stat_IfInRuleCheckerP4Hit) 6635 BCE_PRINTF(sc, "0x%08X : IfInRuleCheckerP4Hit\n", 6636 sblk->stat_IfInRuleCheckerP4Hit); 6637 6638 if (sblk->stat_CatchupInRuleCheckerDiscards) 6639 BCE_PRINTF(sc, "0x%08X : CatchupInRuleCheckerDiscards\n", 6640 sblk->stat_CatchupInRuleCheckerDiscards); 6641 6642 if (sblk->stat_CatchupInFTQDiscards) 6643 BCE_PRINTF(sc, "0x%08X : CatchupInFTQDiscards\n", 6644 sblk->stat_CatchupInFTQDiscards); 6645 6646 if (sblk->stat_CatchupInMBUFDiscards) 6647 BCE_PRINTF(sc, "0x%08X : CatchupInMBUFDiscards\n", 6648 sblk->stat_CatchupInMBUFDiscards); 6649 6650 if (sblk->stat_CatchupInRuleCheckerP4Hit) 6651 BCE_PRINTF(sc, "0x%08X : CatchupInRuleCheckerP4Hit\n", 6652 sblk->stat_CatchupInRuleCheckerP4Hit); 6653 6654 BCE_PRINTF(sc, 6655 "-----------------------------" 6656 "--------------" 6657 "-----------------------------\n"); 6658} 6659 6660 6661static void 6662bce_dump_driver_state(struct bce_softc *sc) 6663{ 6664 u32 val_hi, val_lo; 6665 6666 BCE_PRINTF(sc, 6667 "-----------------------------" 6668 " Driver State " 6669 "-----------------------------\n"); 6670 6671 val_hi = BCE_ADDR_HI(sc); 6672 val_lo = BCE_ADDR_LO(sc); 6673 BCE_PRINTF(sc, "0x%08X:%08X - (sc) driver softc structure virtual address\n", 6674 val_hi, val_lo); 6675 6676 val_hi = BCE_ADDR_HI(sc->bce_vhandle); 6677 val_lo = BCE_ADDR_LO(sc->bce_vhandle); 6678 BCE_PRINTF(sc, "0x%08X:%08X - (sc->bce_vhandle) PCI BAR virtual address\n", 6679 val_hi, val_lo); 6680 6681 val_hi = BCE_ADDR_HI(sc->status_block); 6682 val_lo = BCE_ADDR_LO(sc->status_block); 6683 BCE_PRINTF(sc, "0x%08X:%08X - (sc->status_block) status block virtual address\n", 6684 val_hi, val_lo); 6685 6686 val_hi = BCE_ADDR_HI(sc->stats_block); 6687 val_lo = BCE_ADDR_LO(sc->stats_block); 6688 BCE_PRINTF(sc, "0x%08X:%08X - (sc->stats_block) statistics block virtual address\n", 6689 val_hi, val_lo); 6690 6691 val_hi = BCE_ADDR_HI(sc->tx_bd_chain); 6692 val_lo = BCE_ADDR_LO(sc->tx_bd_chain); 6693 BCE_PRINTF(sc, 6694 "0x%08X:%08X - (sc->tx_bd_chain) tx_bd chain virtual adddress\n", 6695 val_hi, val_lo); 6696 6697 val_hi = BCE_ADDR_HI(sc->rx_bd_chain); 6698 val_lo = BCE_ADDR_LO(sc->rx_bd_chain); 6699 BCE_PRINTF(sc, 6700 "0x%08X:%08X - (sc->rx_bd_chain) rx_bd chain virtual address\n", 6701 val_hi, val_lo); 6702 6703 val_hi = BCE_ADDR_HI(sc->tx_mbuf_ptr); 6704 val_lo = BCE_ADDR_LO(sc->tx_mbuf_ptr); 6705 BCE_PRINTF(sc, 6706 "0x%08X:%08X - (sc->tx_mbuf_ptr) tx mbuf chain virtual address\n", 6707 val_hi, val_lo); 6708 6709 val_hi = BCE_ADDR_HI(sc->rx_mbuf_ptr); 6710 val_lo = BCE_ADDR_LO(sc->rx_mbuf_ptr); 6711 BCE_PRINTF(sc, 6712 "0x%08X:%08X - (sc->rx_mbuf_ptr) rx mbuf chain virtual address\n", 6713 val_hi, val_lo); 6714 6715 BCE_PRINTF(sc, " 0x%08X - (sc->interrupts_generated) h/w intrs\n", 6716 sc->interrupts_generated); 6717 6718 BCE_PRINTF(sc, " 0x%08X - (sc->rx_interrupts) rx interrupts handled\n", 6719 sc->rx_interrupts); 6720 6721 BCE_PRINTF(sc, " 0x%08X - (sc->tx_interrupts) tx interrupts handled\n", 6722 sc->tx_interrupts); 6723 6724 BCE_PRINTF(sc, " 0x%08X - (sc->last_status_idx) status block index\n", 6725 sc->last_status_idx); 6726 6727 BCE_PRINTF(sc, " 0x%08X - (sc->tx_prod) tx producer index\n", 6728 sc->tx_prod); 6729 6730 BCE_PRINTF(sc, " 0x%08X - (sc->tx_cons) tx consumer index\n", 6731 sc->tx_cons); 6732 6733 BCE_PRINTF(sc, " 0x%08X - (sc->tx_prod_bseq) tx producer bseq index\n", 6734 sc->tx_prod_bseq); 6735 6736 BCE_PRINTF(sc, " 0x%08X - (sc->rx_prod) rx producer index\n", 6737 sc->rx_prod); 6738 6739 BCE_PRINTF(sc, " 0x%08X - (sc->rx_cons) rx consumer index\n", 6740 sc->rx_cons); 6741 6742 BCE_PRINTF(sc, " 0x%08X - (sc->rx_prod_bseq) rx producer bseq index\n", 6743 sc->rx_prod_bseq); 6744 6745 BCE_PRINTF(sc, " 0x%08X - (sc->rx_mbuf_alloc) rx mbufs allocated\n", 6746 sc->rx_mbuf_alloc); 6747 6748 BCE_PRINTF(sc, " 0x%08X - (sc->free_rx_bd) free rx_bd's\n", 6749 sc->free_rx_bd); 6750 6751 BCE_PRINTF(sc, "0x%08X/%08X - (sc->rx_low_watermark) rx low watermark\n", 6752 sc->rx_low_watermark, (u32) USABLE_RX_BD); 6753 6754 BCE_PRINTF(sc, " 0x%08X - (sc->txmbuf_alloc) tx mbufs allocated\n", 6755 sc->tx_mbuf_alloc); 6756 6757 BCE_PRINTF(sc, " 0x%08X - (sc->rx_mbuf_alloc) rx mbufs allocated\n", 6758 sc->rx_mbuf_alloc); 6759 6760 BCE_PRINTF(sc, " 0x%08X - (sc->used_tx_bd) used tx_bd's\n", 6761 sc->used_tx_bd); 6762 6763 BCE_PRINTF(sc, "0x%08X/%08X - (sc->tx_hi_watermark) tx hi watermark\n", 6764 sc->tx_hi_watermark, (u32) USABLE_TX_BD); 6765 6766 BCE_PRINTF(sc, " 0x%08X - (sc->mbuf_alloc_failed) failed mbuf alloc\n", 6767 sc->mbuf_alloc_failed); 6768 6769 BCE_PRINTF(sc, 6770 "-----------------------------" 6771 "--------------" 6772 "-----------------------------\n"); 6773} 6774 6775 6776static void 6777bce_dump_hw_state(struct bce_softc *sc) 6778{ 6779 u32 val1; 6780 6781 BCE_PRINTF(sc, 6782 "----------------------------" 6783 " Hardware State " 6784 "----------------------------\n"); 6785 6786 BCE_PRINTF(sc, "0x%08X : bootcode version\n", sc->bce_fw_ver); 6787 6788 val1 = REG_RD(sc, BCE_MISC_ENABLE_STATUS_BITS); 6789 BCE_PRINTF(sc, "0x%08X : (0x%04X) misc_enable_status_bits\n", 6790 val1, BCE_MISC_ENABLE_STATUS_BITS); 6791 6792 val1 = REG_RD(sc, BCE_DMA_STATUS); 6793 BCE_PRINTF(sc, "0x%08X : (0x%04X) dma_status\n", val1, BCE_DMA_STATUS); 6794 6795 val1 = REG_RD(sc, BCE_CTX_STATUS); 6796 BCE_PRINTF(sc, "0x%08X : (0x%04X) ctx_status\n", val1, BCE_CTX_STATUS); 6797 6798 val1 = REG_RD(sc, BCE_EMAC_STATUS); 6799 BCE_PRINTF(sc, "0x%08X : (0x%04X) emac_status\n", val1, BCE_EMAC_STATUS); 6800 6801 val1 = REG_RD(sc, BCE_RPM_STATUS); 6802 BCE_PRINTF(sc, "0x%08X : (0x%04X) rpm_status\n", val1, BCE_RPM_STATUS); 6803 6804 val1 = REG_RD(sc, BCE_TBDR_STATUS); 6805 BCE_PRINTF(sc, "0x%08X : (0x%04X) tbdr_status\n", val1, BCE_TBDR_STATUS); 6806 6807 val1 = REG_RD(sc, BCE_TDMA_STATUS); 6808 BCE_PRINTF(sc, "0x%08X : (0x%04X) tdma_status\n", val1, BCE_TDMA_STATUS); 6809 6810 val1 = REG_RD(sc, BCE_HC_STATUS); 6811 BCE_PRINTF(sc, "0x%08X : (0x%04X) hc_status\n", val1, BCE_HC_STATUS); 6812 6813 BCE_PRINTF(sc, 6814 "----------------------------" 6815 "----------------" 6816 "----------------------------\n"); 6817 6818 BCE_PRINTF(sc, 6819 "----------------------------" 6820 " Register Dump " 6821 "----------------------------\n"); 6822 6823 for (int i = 0x400; i < 0x8000; i += 0x10) 6824 BCE_PRINTF(sc, "0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n", 6825 i, REG_RD(sc, i), REG_RD(sc, i + 0x4), 6826 REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC)); 6827 6828 BCE_PRINTF(sc, 6829 "----------------------------" 6830 "----------------" 6831 "----------------------------\n"); 6832} 6833 6834 6835static void 6836bce_breakpoint(struct bce_softc *sc) 6837{ 6838 6839 /* Unreachable code to shut the compiler up about unused functions. */ 6840 if (0) { 6841 bce_dump_txbd(sc, 0, NULL); 6842 bce_dump_rxbd(sc, 0, NULL); 6843 bce_dump_tx_mbuf_chain(sc, 0, USABLE_TX_BD); 6844 bce_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD); 6845 bce_dump_l2fhdr(sc, 0, NULL); 6846 bce_dump_tx_chain(sc, 0, USABLE_TX_BD); 6847 bce_dump_rx_chain(sc, 0, USABLE_RX_BD); 6848 bce_dump_status_block(sc); 6849 bce_dump_stats_block(sc); 6850 bce_dump_driver_state(sc); 6851 bce_dump_hw_state(sc); 6852 } 6853 6854 bce_dump_driver_state(sc); 6855 /* Print the important status block fields. */ 6856 bce_dump_status_block(sc); 6857 6858 /* Call the debugger. */ 6859 breakpoint(); 6860 6861 return; 6862} 6863#endif 6864