if_athioctl.h revision 238929
1/*- 2 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13 * redistribution must be conditioned upon including a substantially 14 * similar Disclaimer requirement for further binary redistribution. 15 * 16 * NO WARRANTY 17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 20 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 21 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 22 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 25 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27 * THE POSSIBILITY OF SUCH DAMAGES. 28 * 29 * $FreeBSD: head/sys/dev/ath/if_athioctl.h 238929 2012-07-31 02:18:10Z adrian $ 30 */ 31 32/* 33 * Ioctl-related defintions for the Atheros Wireless LAN controller driver. 34 */ 35#ifndef _DEV_ATH_ATHIOCTL_H 36#define _DEV_ATH_ATHIOCTL_H 37 38struct ath_tx_aggr_stats { 39 u_int32_t aggr_pkts[64]; 40 u_int32_t aggr_single_pkt; 41 u_int32_t aggr_nonbaw_pkt; 42 u_int32_t aggr_aggr_pkt; 43 u_int32_t aggr_baw_closed_single_pkt; 44 u_int32_t aggr_low_hwq_single_pkt; 45 u_int32_t aggr_sched_nopkt; 46 u_int32_t aggr_rts_aggr_limited; 47}; 48 49struct ath_intr_stats { 50 u_int32_t sync_intr[32]; 51}; 52 53struct ath_stats { 54 u_int32_t ast_watchdog; /* device reset by watchdog */ 55 u_int32_t ast_hardware; /* fatal hardware error interrupts */ 56 u_int32_t ast_bmiss; /* beacon miss interrupts */ 57 u_int32_t ast_bmiss_phantom;/* beacon miss interrupts */ 58 u_int32_t ast_bstuck; /* beacon stuck interrupts */ 59 u_int32_t ast_rxorn; /* rx overrun interrupts */ 60 u_int32_t ast_rxeol; /* rx eol interrupts */ 61 u_int32_t ast_txurn; /* tx underrun interrupts */ 62 u_int32_t ast_mib; /* mib interrupts */ 63 u_int32_t ast_intrcoal; /* interrupts coalesced */ 64 u_int32_t ast_tx_packets; /* packet sent on the interface */ 65 u_int32_t ast_tx_mgmt; /* management frames transmitted */ 66 u_int32_t ast_tx_discard; /* frames discarded prior to assoc */ 67 u_int32_t ast_tx_qstop; /* output stopped 'cuz no buffer */ 68 u_int32_t ast_tx_encap; /* tx encapsulation failed */ 69 u_int32_t ast_tx_nonode; /* tx failed 'cuz no node */ 70 u_int32_t ast_tx_nombuf; /* tx failed 'cuz no mbuf */ 71 u_int32_t ast_tx_nomcl; /* tx failed 'cuz no cluster */ 72 u_int32_t ast_tx_linear; /* tx linearized to cluster */ 73 u_int32_t ast_tx_nodata; /* tx discarded empty frame */ 74 u_int32_t ast_tx_busdma; /* tx failed for dma resrcs */ 75 u_int32_t ast_tx_xretries;/* tx failed 'cuz too many retries */ 76 u_int32_t ast_tx_fifoerr; /* tx failed 'cuz FIFO underrun */ 77 u_int32_t ast_tx_filtered;/* tx failed 'cuz xmit filtered */ 78 u_int32_t ast_tx_shortretry;/* tx on-chip retries (short) */ 79 u_int32_t ast_tx_longretry;/* tx on-chip retries (long) */ 80 u_int32_t ast_tx_badrate; /* tx failed 'cuz bogus xmit rate */ 81 u_int32_t ast_tx_noack; /* tx frames with no ack marked */ 82 u_int32_t ast_tx_rts; /* tx frames with rts enabled */ 83 u_int32_t ast_tx_cts; /* tx frames with cts enabled */ 84 u_int32_t ast_tx_shortpre;/* tx frames with short preamble */ 85 u_int32_t ast_tx_altrate; /* tx frames with alternate rate */ 86 u_int32_t ast_tx_protect; /* tx frames with protection */ 87 u_int32_t ast_tx_ctsburst;/* tx frames with cts and bursting */ 88 u_int32_t ast_tx_ctsext; /* tx frames with cts extension */ 89 u_int32_t ast_rx_nombuf; /* rx setup failed 'cuz no mbuf */ 90 u_int32_t ast_rx_busdma; /* rx setup failed for dma resrcs */ 91 u_int32_t ast_rx_orn; /* rx failed 'cuz of desc overrun */ 92 u_int32_t ast_rx_crcerr; /* rx failed 'cuz of bad CRC */ 93 u_int32_t ast_rx_fifoerr; /* rx failed 'cuz of FIFO overrun */ 94 u_int32_t ast_rx_badcrypt;/* rx failed 'cuz decryption */ 95 u_int32_t ast_rx_badmic; /* rx failed 'cuz MIC failure */ 96 u_int32_t ast_rx_phyerr; /* rx failed 'cuz of PHY err */ 97 u_int32_t ast_rx_phy[64]; /* rx PHY error per-code counts */ 98 u_int32_t ast_rx_tooshort;/* rx discarded 'cuz frame too short */ 99 u_int32_t ast_rx_toobig; /* rx discarded 'cuz frame too large */ 100 u_int32_t ast_rx_packets; /* packet recv on the interface */ 101 u_int32_t ast_rx_mgt; /* management frames received */ 102 u_int32_t ast_rx_ctl; /* rx discarded 'cuz ctl frame */ 103 int8_t ast_tx_rssi; /* tx rssi of last ack */ 104 int8_t ast_rx_rssi; /* rx rssi from histogram */ 105 u_int8_t ast_tx_rate; /* IEEE rate of last unicast tx */ 106 u_int32_t ast_be_xmit; /* beacons transmitted */ 107 u_int32_t ast_be_nombuf; /* beacon setup failed 'cuz no mbuf */ 108 u_int32_t ast_per_cal; /* periodic calibration calls */ 109 u_int32_t ast_per_calfail;/* periodic calibration failed */ 110 u_int32_t ast_per_rfgain; /* periodic calibration rfgain reset */ 111 u_int32_t ast_rate_calls; /* rate control checks */ 112 u_int32_t ast_rate_raise; /* rate control raised xmit rate */ 113 u_int32_t ast_rate_drop; /* rate control dropped xmit rate */ 114 u_int32_t ast_ant_defswitch;/* rx/default antenna switches */ 115 u_int32_t ast_ant_txswitch;/* tx antenna switches */ 116 u_int32_t ast_ant_rx[8]; /* rx frames with antenna */ 117 u_int32_t ast_ant_tx[8]; /* tx frames with antenna */ 118 u_int32_t ast_cabq_xmit; /* cabq frames transmitted */ 119 u_int32_t ast_cabq_busy; /* cabq found busy */ 120 u_int32_t ast_tx_raw; /* tx frames through raw api */ 121 u_int32_t ast_ff_txok; /* fast frames tx'd successfully */ 122 u_int32_t ast_ff_txerr; /* fast frames tx'd w/ error */ 123 u_int32_t ast_ff_rx; /* fast frames rx'd */ 124 u_int32_t ast_ff_flush; /* fast frames flushed from staging q */ 125 u_int32_t ast_tx_qfull; /* tx dropped 'cuz of queue limit */ 126 int8_t ast_rx_noise; /* rx noise floor */ 127 u_int32_t ast_tx_nobuf; /* tx dropped 'cuz no ath buffer */ 128 u_int32_t ast_tdma_update;/* TDMA slot timing updates */ 129 u_int32_t ast_tdma_timers;/* TDMA slot update set beacon timers */ 130 u_int32_t ast_tdma_tsf; /* TDMA slot update set TSF */ 131 u_int16_t ast_tdma_tsfadjp;/* TDMA slot adjust+ (usec, smoothed)*/ 132 u_int16_t ast_tdma_tsfadjm;/* TDMA slot adjust- (usec, smoothed)*/ 133 u_int32_t ast_tdma_ack; /* TDMA tx failed 'cuz ACK required */ 134 u_int32_t ast_tx_raw_fail;/* raw tx failed 'cuz h/w down */ 135 u_int32_t ast_tx_nofrag; /* tx dropped 'cuz no ath frag buffer */ 136 u_int32_t ast_be_missed; /* missed beacons */ 137 u_int32_t ast_ani_cal; /* ANI calibrations performed */ 138 u_int32_t ast_rx_agg; /* number of aggregate frames RX'ed */ 139 u_int32_t ast_rx_halfgi; /* RX half-GI */ 140 u_int32_t ast_rx_2040; /* RX 40mhz frame */ 141 u_int32_t ast_rx_pre_crc_err; /* RX pre-delimiter CRC error */ 142 u_int32_t ast_rx_post_crc_err; /* RX post-delimiter CRC error */ 143 u_int32_t ast_rx_decrypt_busy_err; /* RX decrypt engine busy error */ 144 u_int32_t ast_rx_hi_rx_chain; 145 u_int32_t ast_tx_htprotect; /* HT tx frames with protection */ 146 u_int32_t ast_rx_hitqueueend; /* RX hit descr queue end */ 147 u_int32_t ast_tx_timeout; /* Global TX timeout */ 148 u_int32_t ast_tx_cst; /* Carrier sense timeout */ 149 u_int32_t ast_tx_xtxop; /* tx exceeded TXOP */ 150 u_int32_t ast_tx_timerexpired; /* tx exceeded TX_TIMER */ 151 u_int32_t ast_tx_desccfgerr; /* tx desc cfg error */ 152 u_int32_t ast_tx_swretries; /* software TX retries */ 153 u_int32_t ast_tx_swretrymax; /* software TX retry max limit reach */ 154 u_int32_t ast_tx_data_underrun; 155 u_int32_t ast_tx_delim_underrun; 156 u_int32_t ast_tx_aggr_failall; /* aggregate TX failed in its entirety */ 157 u_int32_t ast_tx_getnobuf; 158 u_int32_t ast_tx_getbusybuf; 159 u_int32_t ast_tx_intr; 160 u_int32_t ast_rx_intr; 161 u_int32_t ast_tx_aggr_ok; /* aggregate TX ok */ 162 u_int32_t ast_tx_aggr_fail; /* aggregate TX failed */ 163 u_int32_t ast_tx_mcastq_overflow; /* multicast queue overflow */ 164 u_int32_t ast_rx_keymiss; 165 166 u_int32_t ast_pad[16]; 167}; 168 169#define SIOCGATHSTATS _IOWR('i', 137, struct ifreq) 170#define SIOCZATHSTATS _IOWR('i', 139, struct ifreq) 171#define SIOCGATHAGSTATS _IOWR('i', 141, struct ifreq) 172 173struct ath_diag { 174 char ad_name[IFNAMSIZ]; /* if name, e.g. "ath0" */ 175 u_int16_t ad_id; 176#define ATH_DIAG_DYN 0x8000 /* allocate buffer in caller */ 177#define ATH_DIAG_IN 0x4000 /* copy in parameters */ 178#define ATH_DIAG_OUT 0x0000 /* copy out results (always) */ 179#define ATH_DIAG_ID 0x0fff 180 u_int16_t ad_in_size; /* pack to fit, yech */ 181 caddr_t ad_in_data; 182 caddr_t ad_out_data; 183 u_int ad_out_size; 184 185}; 186#define SIOCGATHDIAG _IOWR('i', 138, struct ath_diag) 187#define SIOCGATHPHYERR _IOWR('i', 140, struct ath_diag) 188 189 190/* 191 * The rate control ioctl has to support multiple potential rate 192 * control classes. For now, instead of trying to support an 193 * abstraction for this in the API, let's just use a TLV 194 * representation for the payload and let userspace sort it out. 195 */ 196struct ath_rateioctl_tlv { 197 uint16_t tlv_id; 198 uint16_t tlv_len; /* length excluding TLV header */ 199}; 200 201/* 202 * This is purely the six byte MAC address. 203 */ 204#define ATH_RATE_TLV_MACADDR 0xaab0 205 206/* 207 * The rate control modules may decide to push a mapping table 208 * of rix -> net80211 ratecode as part of the update. 209 */ 210#define ATH_RATE_TLV_RATETABLE_NENTRIES 64 211struct ath_rateioctl_rt { 212 uint16_t nentries; 213 uint16_t pad[1]; 214 uint8_t ratecode[ATH_RATE_TLV_RATETABLE_NENTRIES]; 215}; 216#define ATH_RATE_TLV_RATETABLE 0xaab1 217 218/* 219 * This is the sample node statistics structure. 220 * More in ath_rate/sample/sample.h. 221 */ 222#define ATH_RATE_TLV_SAMPLENODE 0xaab2 223 224struct ath_rateioctl { 225 char if_name[IFNAMSIZ]; /* if name */ 226 union { 227 uint8_t macaddr[IEEE80211_ADDR_LEN]; 228 uint64_t pad; 229 } is_u; 230 uint32_t len; 231 caddr_t buf; 232}; 233#define SIOCGATHNODERATESTATS _IOWR('i', 149, struct ath_rateioctl) 234#define SIOCGATHRATESTATS _IOWR('i', 150, struct ath_rateioctl) 235 236/* 237 * Radio capture format. 238 */ 239#define ATH_RX_RADIOTAP_PRESENT_BASE ( \ 240 (1 << IEEE80211_RADIOTAP_TSFT) | \ 241 (1 << IEEE80211_RADIOTAP_FLAGS) | \ 242 (1 << IEEE80211_RADIOTAP_RATE) | \ 243 (1 << IEEE80211_RADIOTAP_ANTENNA) | \ 244 (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \ 245 (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | \ 246 (1 << IEEE80211_RADIOTAP_XCHANNEL) | \ 247 0) 248 249#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT 250#define ATH_RX_RADIOTAP_PRESENT \ 251 (ATH_RX_RADIOTAP_PRESENT_BASE | \ 252 (1 << IEEE80211_RADIOTAP_VENDOREXT) | \ 253 (1 << IEEE80211_RADIOTAP_EXT) | \ 254 0) 255#else 256#define ATH_RX_RADIOTAP_PRESENT ATH_RX_RADIOTAP_PRESENT_BASE 257#endif /* ATH_ENABLE_RADIOTAP_PRESENT */ 258 259#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT 260/* 261 * This is higher than the vendor bitmap used inside 262 * the Atheros reference codebase. 263 */ 264 265/* Bit 8 */ 266#define ATH_RADIOTAP_VENDOR_HEADER 8 267 268/* 269 * Using four chains makes all the fields in the 270 * per-chain info header be 4-byte aligned. 271 */ 272#define ATH_RADIOTAP_MAX_CHAINS 4 273 274/* 275 * The vendor radiotap header data needs to be: 276 * 277 * + Aligned to a 4 byte address 278 * + .. so all internal fields are 4 bytes aligned; 279 * + .. and no 64 bit fields are allowed. 280 * 281 * So padding is required to ensure this is the case. 282 * 283 * Note that because of the lack of alignment with the 284 * vendor header (6 bytes), the first field must be 285 * two bytes so it can be accessed by alignment-strict 286 * platform (eg MIPS.) 287 */ 288struct ath_radiotap_vendor_hdr { /* 30 bytes */ 289 uint8_t vh_version; /* 1 */ 290 uint8_t vh_rx_chainmask; /* 1 */ 291 292 /* At this point it should be 4 byte aligned */ 293 uint32_t evm[ATH_RADIOTAP_MAX_CHAINS]; /* 4 * 4 = 16 */ 294 295 uint8_t rssi_ctl[ATH_RADIOTAP_MAX_CHAINS]; /* 4 */ 296 uint8_t rssi_ext[ATH_RADIOTAP_MAX_CHAINS]; /* 4 */ 297 298 uint8_t vh_phyerr_code; /* Phy error code, or 0xff */ 299 uint8_t vh_rs_status; /* RX status */ 300 uint8_t vh_rssi; /* Raw RSSI */ 301 uint8_t vh_pad1[1]; /* Pad to 4 byte boundary */ 302} __packed; 303#endif /* ATH_ENABLE_RADIOTAP_VENDOR_EXT */ 304 305struct ath_rx_radiotap_header { 306 struct ieee80211_radiotap_header wr_ihdr; 307 308#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT 309 /* Vendor extension header bitmap */ 310 uint32_t wr_ext_bitmap; /* 4 */ 311 312 /* 313 * This padding is needed because: 314 * + the radiotap header is 8 bytes; 315 * + the extension bitmap is 4 bytes; 316 * + the tsf is 8 bytes, so it must start on an 8 byte 317 * boundary. 318 */ 319 uint32_t wr_pad1; 320#endif /* ATH_ENABLE_RADIOTAP_VENDOR_EXT */ 321 322 /* Normal radiotap fields */ 323 u_int64_t wr_tsf; 324 u_int8_t wr_flags; 325 u_int8_t wr_rate; 326 int8_t wr_antsignal; 327 int8_t wr_antnoise; 328 u_int8_t wr_antenna; 329 u_int8_t wr_pad[3]; 330 u_int32_t wr_chan_flags; 331 u_int16_t wr_chan_freq; 332 u_int8_t wr_chan_ieee; 333 int8_t wr_chan_maxpow; 334 335#ifdef ATH_ENABLE_RADIOTAP_VENDOR_EXT 336 /* 337 * Vendor header section, as required by the 338 * presence of the vendor extension bit and bitmap 339 * entry. 340 * 341 * XXX This must be aligned to a 4 byte address? 342 * XXX or 8 byte address? 343 */ 344 struct ieee80211_radiotap_vendor_header wr_vh; /* 6 bytes */ 345 346 /* 347 * Because of the lack of alignment enforced by the above 348 * header, this vendor section won't be aligned in any 349 * useful way. So, this will include a two-byte version 350 * value which will force the structure to be 4-byte aligned. 351 */ 352 struct ath_radiotap_vendor_hdr wr_v; 353#endif /* ATH_ENABLE_RADIOTAP_VENDOR_EXT */ 354} __packed; 355 356#define ATH_TX_RADIOTAP_PRESENT ( \ 357 (1 << IEEE80211_RADIOTAP_TSFT) | \ 358 (1 << IEEE80211_RADIOTAP_FLAGS) | \ 359 (1 << IEEE80211_RADIOTAP_RATE) | \ 360 (1 << IEEE80211_RADIOTAP_DBM_TX_POWER) | \ 361 (1 << IEEE80211_RADIOTAP_ANTENNA) | \ 362 (1 << IEEE80211_RADIOTAP_XCHANNEL) | \ 363 0) 364 365struct ath_tx_radiotap_header { 366 struct ieee80211_radiotap_header wt_ihdr; 367 u_int64_t wt_tsf; 368 u_int8_t wt_flags; 369 u_int8_t wt_rate; 370 u_int8_t wt_txpower; 371 u_int8_t wt_antenna; 372 u_int32_t wt_chan_flags; 373 u_int16_t wt_chan_freq; 374 u_int8_t wt_chan_ieee; 375 int8_t wt_chan_maxpow; 376} __packed; 377 378/* 379 * DFS ioctl commands 380 */ 381 382#define DFS_SET_THRESH 2 383#define DFS_GET_THRESH 3 384#define DFS_RADARDETECTS 6 385 386/* 387 * DFS ioctl parameter types 388 */ 389#define DFS_PARAM_FIRPWR 1 390#define DFS_PARAM_RRSSI 2 391#define DFS_PARAM_HEIGHT 3 392#define DFS_PARAM_PRSSI 4 393#define DFS_PARAM_INBAND 5 394#define DFS_PARAM_NOL 6 /* XXX not used in FreeBSD */ 395#define DFS_PARAM_RELSTEP_EN 7 396#define DFS_PARAM_RELSTEP 8 397#define DFS_PARAM_RELPWR_EN 9 398#define DFS_PARAM_RELPWR 10 399#define DFS_PARAM_MAXLEN 11 400#define DFS_PARAM_USEFIR128 12 401#define DFS_PARAM_BLOCKRADAR 13 402#define DFS_PARAM_MAXRSSI_EN 14 403 404/* FreeBSD-specific start at 32 */ 405#define DFS_PARAM_ENABLE 32 406#define DFS_PARAM_EN_EXTCH 33 407 408#endif /* _DEV_ATH_ATHIOCTL_H */ 409