ata-fsl.c revision 248557
1/*- 2 * Copyright (c) 2012 The FreeBSD Foundation 3 * All rights reserved. 4 * 5 * This software was developed by Oleksandr Rybalko under sponsorship 6 * from the FreeBSD Foundation. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD: head/sys/dev/ata/chipsets/ata-fsl.c 248557 2013-03-20 15:39:27Z ray $"); 32 33#include "opt_ata.h" 34#include <sys/param.h> 35#include <sys/module.h> 36#include <sys/systm.h> 37#include <sys/kernel.h> 38#include <sys/ata.h> 39#include <sys/bus.h> 40#include <sys/endian.h> 41#include <sys/malloc.h> 42#include <sys/lock.h> 43#include <sys/mutex.h> 44#include <sys/sema.h> 45#include <sys/taskqueue.h> 46#include <vm/uma.h> 47#include <machine/stdarg.h> 48#include <machine/resource.h> 49#include <machine/bus.h> 50#include <sys/rman.h> 51#include <dev/pci/pcivar.h> 52#include <dev/pci/pcireg.h> 53#include <dev/ata/ata-all.h> 54#include <dev/ata/ata-pci.h> 55#include <ata_if.h> 56 57#include <dev/fdt/fdt_common.h> 58#include <dev/ofw/openfirm.h> 59#include <dev/ofw/ofw_bus.h> 60#include <dev/ofw/ofw_bus_subr.h> 61 62#include <machine/fdt.h> 63 64/* local prototypes */ 65static int imx_ata_ch_attach(device_t dev); 66static int imx_ata_setmode(device_t dev, int target, int mode); 67 68static int 69imx_ata_probe(device_t dev) 70{ 71 struct ata_pci_controller *ctrl; 72 73 if (!ofw_bus_is_compatible(dev, "fsl,imx51-ata")) 74 return (ENXIO); 75 76 ctrl = device_get_softc(dev); 77 78 device_set_desc(dev, "Freescale Integrated PATA Controller"); 79 return (BUS_PROBE_DEFAULT); 80} 81 82static void 83imx_ata_intr(void *data) 84{ 85 struct ata_pci_controller *ctrl = data; 86 87 bus_write_2(ctrl->r_res1, 0x28, bus_read_2(ctrl->r_res1, 0x28)); 88 ctrl->interrupt[0].function(ctrl->interrupt[0].argument); 89} 90 91static int 92imx_ata_attach(device_t dev) 93{ 94 struct ata_pci_controller *ctrl; 95 device_t child; 96 int unit; 97 98 ctrl = device_get_softc(dev); 99 /* do chipset specific setups only needed once */ 100 ctrl->legacy = ata_legacy(dev); 101 ctrl->channels = 1; 102 ctrl->ichannels = -1; 103 ctrl->ch_attach = ata_pci_ch_attach; 104 ctrl->ch_detach = ata_pci_ch_detach; 105 ctrl->dev = dev; 106 107 ctrl->r_type1 = SYS_RES_MEMORY; 108 ctrl->r_rid1 = 0; 109 ctrl->r_res1 = bus_alloc_resource_any(dev, ctrl->r_type1, 110 &ctrl->r_rid1, RF_ACTIVE); 111 112 if (ata_setup_interrupt(dev, imx_ata_intr)) { 113 device_printf(dev, "failed to setup interrupt\n"); 114 return ENXIO; 115 } 116 117 ctrl->channels = 1; 118 119 ctrl->ch_attach = imx_ata_ch_attach; 120 ctrl->setmode = imx_ata_setmode; 121 122 /* attach all channels on this controller */ 123 unit = 0; 124 child = device_add_child(dev, "ata", ((unit == 0) && ctrl->legacy) ? 125 unit : devclass_find_free_unit(ata_devclass, 2)); 126 if (child == NULL) 127 device_printf(dev, "failed to add ata child device\n"); 128 else 129 device_set_ivars(child, (void *)(intptr_t)unit); 130 131 bus_generic_attach(dev); 132 return 0; 133} 134 135static int 136imx_ata_ch_attach(device_t dev) 137{ 138 struct ata_pci_controller *ctrl; 139 struct ata_channel *ch; 140 int i; 141 142 ctrl = device_get_softc(device_get_parent(dev)); 143 ch = device_get_softc(dev); 144 for (i = ATA_DATA; i < ATA_MAX_RES; i++) 145 ch->r_io[i].res = ctrl->r_res1; 146 147 bus_write_2(ctrl->r_res1, 0x24, 0x80); 148 DELAY(100); 149 bus_write_2(ctrl->r_res1, 0x24, 0xc0); 150 DELAY(100); 151 152 153 /* Write TIME_OFF/ON/1/2W */ 154 bus_write_1(ctrl->r_res1, 0x00, 3); 155 bus_write_1(ctrl->r_res1, 0x01, 3); 156 bus_write_1(ctrl->r_res1, 0x02, (25 + 15) / 15); 157 bus_write_1(ctrl->r_res1, 0x03, (70 + 15) / 15); 158 159 /* Write TIME_2R/AX/RDX/4 */ 160 bus_write_1(ctrl->r_res1, 0x04, (70 + 15) / 15); 161 bus_write_1(ctrl->r_res1, 0x05, (50 + 15) / 15 + 2); 162 bus_write_1(ctrl->r_res1, 0x06, 1); 163 bus_write_1(ctrl->r_res1, 0x07, (10 + 15) / 15); 164 165 /* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */ 166 bus_write_1(ctrl->r_res1, 0x08, (10 + 15) / 15); 167 168 bus_write_2(ctrl->r_res1, 0x24, 0xc1); 169 DELAY(30000); 170 171 /* setup ATA registers */ 172 ch->r_io[ATA_DATA ].offset = 0xa0; 173 ch->r_io[ATA_FEATURE].offset = 0xa4; 174 ch->r_io[ATA_ERROR ].offset = 0xa4; 175 ch->r_io[ATA_COUNT ].offset = 0xa8; 176 ch->r_io[ATA_SECTOR ].offset = 0xac; 177 ch->r_io[ATA_CYL_LSB].offset = 0xb0; 178 ch->r_io[ATA_CYL_MSB].offset = 0xb4; 179 ch->r_io[ATA_DRIVE ].offset = 0xb8; 180 ch->r_io[ATA_COMMAND].offset = 0xbc; 181 182 ch->r_io[ATA_STATUS ].offset = 0xbc; 183 ch->r_io[ATA_ALTSTAT].offset = 0xd8; 184 ch->r_io[ATA_CONTROL].offset = 0xd8; 185 186 ata_pci_hw(dev); 187 188 ch->flags |= ATA_NO_SLAVE; 189 ch->flags |= ATA_USE_16BIT; 190 ch->flags |= ATA_CHECKS_CABLE; 191 ch->flags |= ATA_KNOWN_PRESENCE; 192 193 /* Clear pending interrupts. */ 194 bus_write_2(ctrl->r_res1, 0x28, 0xf8); 195 /* Enable all, but Idle interrupts. */ 196 bus_write_2(ctrl->r_res1, 0x2c, 0x88); 197 198 return 0; 199} 200 201static int 202imx_ata_setmode(device_t dev, int target, int mode) 203{ 204 205 return (min(mode, ATA_PIO4)); 206} 207 208static device_method_t imx_ata_methods[] = { 209 DEVMETHOD(device_probe, imx_ata_probe), 210 DEVMETHOD(device_attach, imx_ata_attach), 211 DEVMETHOD(device_detach, ata_pci_detach), 212 DEVMETHOD(device_suspend, ata_pci_suspend), 213 DEVMETHOD(device_resume, ata_pci_resume), 214 DEVMETHOD(device_shutdown, bus_generic_shutdown), 215 DEVMETHOD(bus_read_ivar, ata_pci_read_ivar), 216 DEVMETHOD(bus_write_ivar, ata_pci_write_ivar), 217 DEVMETHOD(bus_alloc_resource, ata_pci_alloc_resource), 218 DEVMETHOD(bus_release_resource, ata_pci_release_resource), 219 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 220 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 221 DEVMETHOD(bus_setup_intr, ata_pci_setup_intr), 222 DEVMETHOD(bus_teardown_intr, ata_pci_teardown_intr), 223 DEVMETHOD(pci_read_config, ata_pci_read_config), 224 DEVMETHOD(pci_write_config, ata_pci_write_config), 225 DEVMETHOD(bus_print_child, ata_pci_print_child), 226 DEVMETHOD(bus_child_location_str, ata_pci_child_location_str), 227 DEVMETHOD_END 228}; 229static driver_t imx_ata_driver = { 230 "atapci", 231 imx_ata_methods, 232 sizeof(struct ata_pci_controller) 233}; 234DRIVER_MODULE(imx_ata, simplebus, imx_ata_driver, ata_pci_devclass, NULL, 235 NULL); 236MODULE_VERSION(imx_ata, 1); 237MODULE_DEPEND(imx_ata, ata, 1, 1, 1); 238MODULE_DEPEND(imx_ata, atapci, 1, 1, 1); 239