ata-amd.c revision 200171
1/*- 2 * Copyright (c) 1998 - 2008 S�ren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: head/sys/dev/ata/chipsets/ata-amd.c 200171 2009-12-06 00:10:13Z mav $"); 29 30#include "opt_ata.h" 31#include <sys/param.h> 32#include <sys/module.h> 33#include <sys/systm.h> 34#include <sys/kernel.h> 35#include <sys/ata.h> 36#include <sys/bus.h> 37#include <sys/endian.h> 38#include <sys/malloc.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/sema.h> 42#include <sys/taskqueue.h> 43#include <vm/uma.h> 44#include <machine/stdarg.h> 45#include <machine/resource.h> 46#include <machine/bus.h> 47#include <sys/rman.h> 48#include <dev/pci/pcivar.h> 49#include <dev/pci/pcireg.h> 50#include <dev/ata/ata-all.h> 51#include <dev/ata/ata-pci.h> 52#include <ata_if.h> 53 54/* local prototypes */ 55static int ata_amd_chipinit(device_t dev); 56static int ata_amd_setmode(device_t dev, int target, int mode); 57 58/* misc defines */ 59#define AMD_BUG 0x01 60#define AMD_CABLE 0x02 61 62 63/* 64 * American Micro Devices (AMD) chipset support functions 65 */ 66static int 67ata_amd_probe(device_t dev) 68{ 69 struct ata_pci_controller *ctlr = device_get_softc(dev); 70 static struct ata_chip_id ids[] = 71 {{ ATA_AMD756, 0x00, 0x00, 0, ATA_UDMA4, "756" }, 72 { ATA_AMD766, 0x00, AMD_CABLE|AMD_BUG, 0, ATA_UDMA5, "766" }, 73 { ATA_AMD768, 0x00, AMD_CABLE, 0, ATA_UDMA5, "768" }, 74 { ATA_AMD8111, 0x00, AMD_CABLE, 0, ATA_UDMA6, "8111" }, 75 { ATA_AMD5536, 0x00, 0x00, 0, ATA_UDMA5, "CS5536" }, 76 { 0, 0, 0, 0, 0, 0}}; 77 78 if (pci_get_vendor(dev) != ATA_AMD_ID) 79 return ENXIO; 80 81 if (!(ctlr->chip = ata_match_chip(dev, ids))) 82 return ENXIO; 83 84 ata_set_desc(dev); 85 ctlr->chipinit = ata_amd_chipinit; 86 return (BUS_PROBE_DEFAULT); 87} 88 89static int 90ata_amd_chipinit(device_t dev) 91{ 92 struct ata_pci_controller *ctlr = device_get_softc(dev); 93 94 if (ata_setup_interrupt(dev, ata_generic_intr)) 95 return ENXIO; 96 97 /* disable/set prefetch, postwrite */ 98 if (ctlr->chip->cfg1 & AMD_BUG) 99 pci_write_config(dev, 0x41, pci_read_config(dev, 0x41, 1) & 0x0f, 1); 100 else 101 pci_write_config(dev, 0x41, pci_read_config(dev, 0x41, 1) | 0xf0, 1); 102 103 ctlr->setmode = ata_amd_setmode; 104 return 0; 105} 106 107static int 108ata_amd_setmode(device_t dev, int target, int mode) 109{ 110 device_t parent = device_get_parent(dev); 111 struct ata_pci_controller *ctlr = device_get_softc(parent); 112 struct ata_channel *ch = device_get_softc(dev); 113 int devno = (ch->unit << 1) + target; 114 int piomode; 115 u_int8_t timings[] = { 0xa8, 0x65, 0x42, 0x22, 0x20, 0xa8, 0x22, 0x20 }; 116 int modes[7] = { 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, 0xc7 }; 117 int reg = 0x53 - devno; 118 119 mode = min(mode, ctlr->chip->max_dma); 120 if (ctlr->chip->cfg1 & AMD_CABLE) { 121 if (mode > ATA_UDMA2 && 122 !(pci_read_config(parent, 0x42, 1) & (1 << devno))) { 123 ata_print_cable(dev, "controller"); 124 mode = ATA_UDMA2; 125 } 126 } 127 /* Set UDMA timings. */ 128 if (mode >= ATA_UDMA0) { 129 pci_write_config(parent, reg, modes[mode & ATA_MODE_MASK], 1); 130 piomode = ATA_PIO4; 131 } else { 132 pci_write_config(parent, reg, 0x8b, 1); 133 piomode = mode; 134 } 135 /* Set WDMA/PIO timings. */ 136 pci_write_config(parent, reg - 0x08, timings[ata_mode2idx(piomode)], 1); 137 return (mode); 138} 139 140ATA_DECLARE_DRIVER(ata_amd); 141