adwlib.c revision 67164
1/* 2 * Low level routines for Second Generation 3 * Advanced Systems Inc. SCSI controllers chips 4 * 5 * Copyright (c) 1998, 1999, 2000 Justin Gibbs. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 24 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $FreeBSD: head/sys/dev/advansys/adwlib.c 67164 2000-10-15 14:19:01Z phk $ 33 */ 34/* 35 * Ported from: 36 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 37 * 38 * Copyright (c) 1995-1998 Advanced System Products, Inc. 39 * All Rights Reserved. 40 * 41 * Redistribution and use in source and binary forms, with or without 42 * modification, are permitted provided that redistributions of source 43 * code retain the above copyright notice and this comment without 44 * modification. 45 */ 46 47#include <sys/param.h> 48#include <sys/systm.h> 49#include <sys/bus.h> 50 51#include <machine/bus_pio.h> 52#include <machine/bus_memio.h> 53#include <machine/bus.h> 54 55#include <cam/cam.h> 56#include <cam/cam_ccb.h> 57#include <cam/cam_sim.h> 58#include <cam/cam_xpt_sim.h> 59#include <cam/scsi/scsi_all.h> 60 61#include <dev/advansys/adwlib.h> 62 63const struct adw_eeprom adw_asc3550_default_eeprom = 64{ 65 ADW_EEPROM_BIOS_ENABLE, /* cfg_lsw */ 66 0x0000, /* cfg_msw */ 67 0xFFFF, /* disc_enable */ 68 0xFFFF, /* wdtr_able */ 69 { 0xFFFF }, /* sdtr_able */ 70 0xFFFF, /* start_motor */ 71 0xFFFF, /* tagqng_able */ 72 0xFFFF, /* bios_scan */ 73 0, /* scam_tolerant */ 74 7, /* adapter_scsi_id */ 75 0, /* bios_boot_delay */ 76 3, /* scsi_reset_delay */ 77 0, /* bios_id_lun */ 78 0, /* termination */ 79 0, /* reserved1 */ 80 0xFFE7, /* bios_ctrl */ 81 { 0xFFFF }, /* ultra_able */ 82 { 0 }, /* reserved2 */ 83 ADW_DEF_MAX_HOST_QNG, /* max_host_qng */ 84 ADW_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 85 0, /* dvc_cntl */ 86 { 0 }, /* bug_fix */ 87 { 0, 0, 0 }, /* serial_number */ 88 0, /* check_sum */ 89 { /* oem_name[16] */ 90 0, 0, 0, 0, 0, 0, 0, 0, 91 0, 0, 0, 0, 0, 0, 0, 0 92 }, 93 0, /* dvc_err_code */ 94 0, /* adv_err_code */ 95 0, /* adv_err_addr */ 96 0, /* saved_dvc_err_code */ 97 0, /* saved_adv_err_code */ 98 0 /* saved_adv_err_addr */ 99}; 100 101const struct adw_eeprom adw_asc38C0800_default_eeprom = 102{ 103 ADW_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ 104 0x0000, /* 01 cfg_msw */ 105 0xFFFF, /* 02 disc_enable */ 106 0xFFFF, /* 03 wdtr_able */ 107 { 0x4444 }, /* 04 sdtr_speed1 */ 108 0xFFFF, /* 05 start_motor */ 109 0xFFFF, /* 06 tagqng_able */ 110 0xFFFF, /* 07 bios_scan */ 111 0, /* 08 scam_tolerant */ 112 7, /* 09 adapter_scsi_id */ 113 0, /* bios_boot_delay */ 114 3, /* 10 scsi_reset_delay */ 115 0, /* bios_id_lun */ 116 0, /* 11 termination_se */ 117 0, /* termination_lvd */ 118 0xFFE7, /* 12 bios_ctrl */ 119 { 0x4444 }, /* 13 sdtr_speed2 */ 120 { 0x4444 }, /* 14 sdtr_speed3 */ 121 ADW_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ 122 ADW_DEF_MAX_DVC_QNG, /* max_dvc_qng */ 123 0, /* 16 dvc_cntl */ 124 { 0x4444 } , /* 17 sdtr_speed4 */ 125 { 0, 0, 0 }, /* 18-20 serial_number */ 126 0, /* 21 check_sum */ 127 { /* 22-29 oem_name[16] */ 128 0, 0, 0, 0, 0, 0, 0, 0, 129 0, 0, 0, 0, 0, 0, 0, 0 130 }, 131 0, /* 30 dvc_err_code */ 132 0, /* 31 adv_err_code */ 133 0, /* 32 adv_err_addr */ 134 0, /* 33 saved_dvc_err_code */ 135 0, /* 34 saved_adv_err_code */ 136 0, /* 35 saved_adv_err_addr */ 137 { /* 36 - 55 reserved */ 138 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 139 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 140 }, 141 0, /* 56 cisptr_lsw */ 142 0, /* 57 cisprt_msw */ 143 /* 58-59 sub-id */ 144 (PCI_ID_ADVANSYS_38C0800_REV1 & PCI_ID_DEV_VENDOR_MASK) >> 32, 145}; 146 147#define ADW_MC_SDTR_OFFSET_ULTRA2_DT 0 148#define ADW_MC_SDTR_OFFSET_ULTRA2 1 149#define ADW_MC_SDTR_OFFSET_ULTRA 2 150const struct adw_syncrate adw_syncrates[] = 151{ 152 /* mc_sdtr period rate */ 153 { ADW_MC_SDTR_80, 9, "80.0" }, 154 { ADW_MC_SDTR_40, 10, "40.0" }, 155 { ADW_MC_SDTR_20, 12, "20.0" }, 156 { ADW_MC_SDTR_10, 25, "10.0" }, 157 { ADW_MC_SDTR_5, 50, "5.0" }, 158 { ADW_MC_SDTR_ASYNC, 0, "async" } 159}; 160 161const int adw_num_syncrates = sizeof(adw_syncrates) / sizeof(adw_syncrates[0]); 162 163static u_int16_t adw_eeprom_read_16(struct adw_softc *adw, int addr); 164static void adw_eeprom_write_16(struct adw_softc *adw, int addr, 165 u_int data); 166static void adw_eeprom_wait(struct adw_softc *adw); 167 168int 169adw_find_signature(struct adw_softc *adw) 170{ 171 if (adw_inb(adw, ADW_SIGNATURE_BYTE) == ADW_CHIP_ID_BYTE 172 && adw_inw(adw, ADW_SIGNATURE_WORD) == ADW_CHIP_ID_WORD) 173 return (1); 174 return (0); 175} 176 177/* 178 * Reset Chip. 179 */ 180void 181adw_reset_chip(struct adw_softc *adw) 182{ 183 adw_outw(adw, ADW_CTRL_REG, ADW_CTRL_REG_CMD_RESET); 184 DELAY(1000 * 100); 185 adw_outw(adw, ADW_CTRL_REG, ADW_CTRL_REG_CMD_WR_IO_REG); 186 187 /* 188 * Initialize Chip registers. 189 */ 190 adw_outw(adw, ADW_SCSI_CFG1, 191 adw_inw(adw, ADW_SCSI_CFG1) & ~ADW_SCSI_CFG1_BIG_ENDIAN); 192} 193 194/* 195 * Reset the SCSI bus. 196 */ 197int 198adw_reset_bus(struct adw_softc *adw) 199{ 200 adw_idle_cmd_status_t status; 201 202 status = 203 adw_idle_cmd_send(adw, ADW_IDLE_CMD_SCSI_RESET_START, /*param*/0); 204 if (status != ADW_IDLE_CMD_SUCCESS) { 205 xpt_print_path(adw->path); 206 printf("Bus Reset start attempt failed\n"); 207 return (1); 208 } 209 DELAY(ADW_BUS_RESET_HOLD_DELAY_US); 210 status = 211 adw_idle_cmd_send(adw, ADW_IDLE_CMD_SCSI_RESET_END, /*param*/0); 212 if (status != ADW_IDLE_CMD_SUCCESS) { 213 xpt_print_path(adw->path); 214 printf("Bus Reset end attempt failed\n"); 215 return (1); 216 } 217 return (0); 218} 219 220/* 221 * Read the specified EEPROM location 222 */ 223static u_int16_t 224adw_eeprom_read_16(struct adw_softc *adw, int addr) 225{ 226 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_READ | addr); 227 adw_eeprom_wait(adw); 228 return (adw_inw(adw, ADW_EEP_DATA)); 229} 230 231static void 232adw_eeprom_write_16(struct adw_softc *adw, int addr, u_int data) 233{ 234 adw_outw(adw, ADW_EEP_DATA, data); 235 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_WRITE | addr); 236 adw_eeprom_wait(adw); 237} 238 239/* 240 * Wait for and EEPROM command to complete 241 */ 242static void 243adw_eeprom_wait(struct adw_softc *adw) 244{ 245 int i; 246 247 for (i = 0; i < ADW_EEP_DELAY_MS; i++) { 248 if ((adw_inw(adw, ADW_EEP_CMD) & ADW_EEP_CMD_DONE) != 0) 249 break; 250 DELAY(1000); 251 } 252 if (i == ADW_EEP_DELAY_MS) 253 panic("%s: Timedout Reading EEPROM", adw_name(adw)); 254} 255 256/* 257 * Read EEPROM configuration into the specified buffer. 258 * 259 * Return a checksum based on the EEPROM configuration read. 260 */ 261u_int16_t 262adw_eeprom_read(struct adw_softc *adw, struct adw_eeprom *eep_buf) 263{ 264 u_int16_t *wbuf; 265 u_int16_t wval; 266 u_int16_t chksum; 267 int eep_addr; 268 269 wbuf = (u_int16_t *)eep_buf; 270 chksum = 0; 271 272 for (eep_addr = ADW_EEP_DVC_CFG_BEGIN; 273 eep_addr < ADW_EEP_DVC_CFG_END; 274 eep_addr++, wbuf++) { 275 wval = adw_eeprom_read_16(adw, eep_addr); 276 chksum += wval; 277 *wbuf = wval; 278 } 279 280 /* checksum field is not counted in the checksum */ 281 *wbuf = adw_eeprom_read_16(adw, eep_addr); 282 wbuf++; 283 284 /* Driver seeprom variables are not included in the checksum */ 285 for (eep_addr = ADW_EEP_DVC_CTL_BEGIN; 286 eep_addr < ADW_EEP_MAX_WORD_ADDR; 287 eep_addr++, wbuf++) 288 *wbuf = adw_eeprom_read_16(adw, eep_addr); 289 290 return (chksum); 291} 292 293void 294adw_eeprom_write(struct adw_softc *adw, struct adw_eeprom *eep_buf) 295{ 296 u_int16_t *wbuf; 297 u_int16_t addr; 298 u_int16_t chksum; 299 300 wbuf = (u_int16_t *)eep_buf; 301 chksum = 0; 302 303 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_WRITE_ABLE); 304 adw_eeprom_wait(adw); 305 306 /* 307 * Write EEPROM until checksum. 308 */ 309 for (addr = ADW_EEP_DVC_CFG_BEGIN; 310 addr < ADW_EEP_DVC_CFG_END; addr++, wbuf++) { 311 chksum += *wbuf; 312 adw_eeprom_write_16(adw, addr, *wbuf); 313 } 314 315 /* 316 * Write calculated EEPROM checksum 317 */ 318 adw_eeprom_write_16(adw, addr, chksum); 319 320 /* skip over buffer's checksum */ 321 wbuf++; 322 323 /* 324 * Write the rest. 325 */ 326 for (addr = ADW_EEP_DVC_CTL_BEGIN; 327 addr < ADW_EEP_MAX_WORD_ADDR; addr++, wbuf++) 328 adw_eeprom_write_16(adw, addr, *wbuf); 329 330 adw_outw(adw, ADW_EEP_CMD, ADW_EEP_CMD_WRITE_DISABLE); 331 adw_eeprom_wait(adw); 332} 333 334int 335adw_init_chip(struct adw_softc *adw, u_int term_scsicfg1) 336{ 337 u_int8_t biosmem[ADW_MC_BIOSLEN]; 338 const u_int16_t *word_table; 339 const u_int8_t *byte_codes; 340 const u_int8_t *byte_codes_end; 341 u_int bios_sig; 342 u_int bytes_downloaded; 343 u_int addr; 344 u_int end_addr; 345 u_int checksum; 346 u_int scsicfg1; 347 u_int tid; 348 349 /* 350 * Save the RISC memory BIOS region before writing the microcode. 351 * The BIOS may already be loaded and using its RISC LRAM region 352 * so its region must be saved and restored. 353 */ 354 for (addr = 0; addr < ADW_MC_BIOSLEN; addr++) 355 biosmem[addr] = adw_lram_read_8(adw, ADW_MC_BIOSMEM + addr); 356 357 /* 358 * Save current per TID negotiated values if the BIOS has been 359 * loaded (BIOS signature is present). These will be used if 360 * we cannot get information from the EEPROM. 361 */ 362 addr = ADW_MC_BIOS_SIGNATURE - ADW_MC_BIOSMEM; 363 bios_sig = biosmem[addr] 364 | (biosmem[addr + 1] << 8); 365 if (bios_sig == 0x55AA 366 && (adw->flags & ADW_EEPROM_FAILED) != 0) { 367 u_int major_ver; 368 u_int minor_ver; 369 u_int sdtr_able; 370 371 addr = ADW_MC_BIOS_VERSION - ADW_MC_BIOSMEM; 372 minor_ver = biosmem[addr + 1] & 0xF; 373 major_ver = (biosmem[addr + 1] >> 4) & 0xF; 374 if ((adw->chip == ADW_CHIP_ASC3550) 375 && (major_ver <= 3 376 || (major_ver == 3 && minor_ver == 1))) { 377 /* 378 * BIOS 3.1 and earlier location of 379 * 'wdtr_able' variable. 380 */ 381 adw->user_wdtr = 382 adw_lram_read_16(adw, ADW_MC_WDTR_ABLE_BIOS_31); 383 } else { 384 adw->user_wdtr = 385 adw_lram_read_16(adw, ADW_MC_WDTR_ABLE); 386 } 387 sdtr_able = adw_lram_read_16(adw, ADW_MC_SDTR_ABLE); 388 for (tid = 0; tid < ADW_MAX_TID; tid++) { 389 u_int tid_mask; 390 u_int mc_sdtr; 391 392 tid_mask = 0x1 << tid; 393 if ((sdtr_able & tid_mask) == 0) 394 mc_sdtr = ADW_MC_SDTR_ASYNC; 395 else if ((adw->features & ADW_DT) != 0) 396 mc_sdtr = ADW_MC_SDTR_80; 397 else if ((adw->features & ADW_ULTRA2) != 0) 398 mc_sdtr = ADW_MC_SDTR_40; 399 else 400 mc_sdtr = ADW_MC_SDTR_20; 401 adw_set_user_sdtr(adw, tid, mc_sdtr); 402 } 403 adw->user_tagenb = adw_lram_read_16(adw, ADW_MC_TAGQNG_ABLE); 404 } 405 406 /* 407 * Load the Microcode. 408 * 409 * Assume the following compressed format of the microcode buffer: 410 * 411 * 253 word (506 byte) table indexed by byte code followed 412 * by the following byte codes: 413 * 414 * 1-Byte Code: 415 * 00: Emit word 0 in table. 416 * 01: Emit word 1 in table. 417 * . 418 * FD: Emit word 253 in table. 419 * 420 * Multi-Byte Code: 421 * FD RESEVED 422 * 423 * FE WW WW: (3 byte code) 424 * Word to emit is the next word WW WW. 425 * FF BB WW WW: (4 byte code) 426 * Emit BB count times next word WW WW. 427 * 428 */ 429 bytes_downloaded = 0; 430 word_table = (const u_int16_t *)adw->mcode_data->mcode_buf; 431 byte_codes = (const u_int8_t *)&word_table[253]; 432 byte_codes_end = adw->mcode_data->mcode_buf 433 + adw->mcode_data->mcode_size; 434 adw_outw(adw, ADW_RAM_ADDR, 0); 435 while (byte_codes < byte_codes_end) { 436 if (*byte_codes == 0xFF) { 437 u_int16_t value; 438 439 value = byte_codes[2] 440 | byte_codes[3] << 8; 441 adw_set_multi_2(adw, ADW_RAM_DATA, 442 value, byte_codes[1]); 443 bytes_downloaded += byte_codes[1]; 444 byte_codes += 4; 445 } else if (*byte_codes == 0xFE) { 446 u_int16_t value; 447 448 value = byte_codes[1] 449 | byte_codes[2] << 8; 450 adw_outw(adw, ADW_RAM_DATA, value); 451 bytes_downloaded++; 452 byte_codes += 3; 453 } else { 454 adw_outw(adw, ADW_RAM_DATA, word_table[*byte_codes]); 455 bytes_downloaded++; 456 byte_codes++; 457 } 458 } 459 /* Convert from words to bytes */ 460 bytes_downloaded *= 2; 461 462 /* 463 * Clear the rest of LRAM. 464 */ 465 for (addr = bytes_downloaded; addr < adw->memsize; addr += 2) 466 adw_outw(adw, ADW_RAM_DATA, 0); 467 468 /* 469 * Verify the microcode checksum. 470 */ 471 checksum = 0; 472 adw_outw(adw, ADW_RAM_ADDR, 0); 473 for (addr = 0; addr < bytes_downloaded; addr += 2) 474 checksum += adw_inw(adw, ADW_RAM_DATA); 475 476 if (checksum != adw->mcode_data->mcode_chksum) { 477 printf("%s: Firmware load failed!\n", adw_name(adw)); 478 return (EIO); 479 } 480 481 /* 482 * Restore the RISC memory BIOS region. 483 */ 484 for (addr = 0; addr < ADW_MC_BIOSLEN; addr++) 485 adw_lram_write_8(adw, addr + ADW_MC_BIOSLEN, biosmem[addr]); 486 487 /* 488 * Calculate and write the microcode code checksum to 489 * the microcode code checksum location. 490 */ 491 addr = adw_lram_read_16(adw, ADW_MC_CODE_BEGIN_ADDR); 492 end_addr = adw_lram_read_16(adw, ADW_MC_CODE_END_ADDR); 493 checksum = 0; 494 adw_outw(adw, ADW_RAM_ADDR, addr); 495 for (; addr < end_addr; addr += 2) 496 checksum += adw_inw(adw, ADW_RAM_DATA); 497 adw_lram_write_16(adw, ADW_MC_CODE_CHK_SUM, checksum); 498 499 /* 500 * Tell the microcode what kind of chip it's running on. 501 */ 502 adw_lram_write_16(adw, ADW_MC_CHIP_TYPE, adw->chip); 503 504 /* 505 * Leave WDTR and SDTR negotiation disabled until the XPT has 506 * informed us of device capabilities, but do set the desired 507 * user rates in case we receive an SDTR request from the target 508 * before we negotiate. We turn on tagged queuing at the microcode 509 * level for all devices, and modulate this on a per command basis. 510 */ 511 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED1, adw->user_sdtr[0]); 512 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED2, adw->user_sdtr[1]); 513 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED3, adw->user_sdtr[2]); 514 adw_lram_write_16(adw, ADW_MC_SDTR_SPEED4, adw->user_sdtr[3]); 515 adw_lram_write_16(adw, ADW_MC_DISC_ENABLE, adw->user_discenb); 516 for (tid = 0; tid < ADW_MAX_TID; tid++) { 517 /* Cam limits the maximum number of commands for us */ 518 adw_lram_write_8(adw, ADW_MC_NUMBER_OF_MAX_CMD + tid, 519 adw->max_acbs); 520 } 521 adw_lram_write_16(adw, ADW_MC_TAGQNG_ABLE, ~0); 522 523 /* 524 * Set SCSI_CFG0 Microcode Default Value. 525 * 526 * The microcode will set the SCSI_CFG0 register using this value 527 * after it is started. 528 */ 529 adw_lram_write_16(adw, ADW_MC_DEFAULT_SCSI_CFG0, 530 ADW_SCSI_CFG0_PARITY_EN|ADW_SCSI_CFG0_SEL_TMO_LONG| 531 ADW_SCSI_CFG0_OUR_ID_EN|adw->initiator_id); 532 533 /* 534 * Tell the MC about the memory size that 535 * was setup by the probe code. 536 */ 537 adw_lram_write_16(adw, ADW_MC_DEFAULT_MEM_CFG, 538 adw_inb(adw, ADW_MEM_CFG) & ADW_MEM_CFG_RAM_SZ_MASK); 539 540 /* 541 * Determine SCSI_CFG1 Microcode Default Value. 542 * 543 * The microcode will set the SCSI_CFG1 register using this value 544 * after it is started below. 545 */ 546 scsicfg1 = adw_inw(adw, ADW_SCSI_CFG1); 547 548 /* 549 * If the internal narrow cable is reversed all of the SCSI_CTRL 550 * register signals will be set. Check for and return an error if 551 * this condition is found. 552 */ 553 if ((adw_inw(adw, ADW_SCSI_CTRL) & 0x3F07) == 0x3F07) { 554 printf("%s: Illegal Cable Config!\n", adw_name(adw)); 555 printf("%s: Internal cable is reversed!\n", adw_name(adw)); 556 return (EIO); 557 } 558 559 /* 560 * If this is a differential board and a single-ended device 561 * is attached to one of the connectors, return an error. 562 */ 563 if ((adw->features & ADW_ULTRA) != 0) { 564 if ((scsicfg1 & ADW_SCSI_CFG1_DIFF_MODE) != 0 565 && (scsicfg1 & ADW_SCSI_CFG1_DIFF_SENSE) == 0) { 566 printf("%s: A Single Ended Device is attached to our " 567 "differential bus!\n", adw_name(adw)); 568 return (EIO); 569 } 570 } else { 571 if ((scsicfg1 & ADW2_SCSI_CFG1_DEV_DETECT_HVD) != 0) { 572 printf("%s: A High Voltage Differential Device " 573 "is attached to this controller.\n", 574 adw_name(adw)); 575 printf("%s: HVD devices are not supported.\n", 576 adw_name(adw)); 577 return (EIO); 578 } 579 } 580 581 /* 582 * Perform automatic termination control if desired. 583 */ 584 if ((adw->features & ADW_ULTRA2) != 0) { 585 u_int cable_det; 586 587 /* 588 * Ultra2 Chips require termination disabled to 589 * detect cable presence. 590 */ 591 adw_outw(adw, ADW_SCSI_CFG1, 592 scsicfg1 | ADW2_SCSI_CFG1_DIS_TERM_DRV); 593 cable_det = adw_inw(adw, ADW_SCSI_CFG1); 594 adw_outw(adw, ADW_SCSI_CFG1, scsicfg1); 595 596 /* SE Termination first if auto-term has been specified */ 597 if ((term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK) == 0) { 598 599 /* 600 * For all SE cable configurations, high byte 601 * termination is enabled. 602 */ 603 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_H; 604 if ((cable_det & ADW_SCSI_CFG1_INT8_MASK) != 0 605 || (cable_det & ADW_SCSI_CFG1_INT16_MASK) != 0) { 606 /* 607 * If either cable is not present, the 608 * low byte must be terminated as well. 609 */ 610 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_L; 611 } 612 } 613 614 /* LVD auto-term */ 615 if ((term_scsicfg1 & ADW2_SCSI_CFG1_TERM_CTL_LVD) == 0 616 && (term_scsicfg1 & ADW2_SCSI_CFG1_DIS_TERM_DRV) == 0) { 617 /* 618 * If both cables are installed, termination 619 * is disabled. Otherwise it is enabled. 620 */ 621 if ((cable_det & ADW2_SCSI_CFG1_EXTLVD_MASK) != 0 622 || (cable_det & ADW2_SCSI_CFG1_INTLVD_MASK) != 0) { 623 624 term_scsicfg1 |= ADW2_SCSI_CFG1_TERM_CTL_LVD; 625 } 626 } 627 term_scsicfg1 &= ~ADW2_SCSI_CFG1_DIS_TERM_DRV; 628 } else { 629 /* Ultra Controller Termination */ 630 if ((term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK) == 0) { 631 int cable_count; 632 int wide_cable_count; 633 634 cable_count = 0; 635 wide_cable_count = 0; 636 if ((scsicfg1 & ADW_SCSI_CFG1_INT16_MASK) == 0) { 637 cable_count++; 638 wide_cable_count++; 639 } 640 if ((scsicfg1 & ADW_SCSI_CFG1_INT8_MASK) == 0) 641 cable_count++; 642 643 /* There is only one external port */ 644 if ((scsicfg1 & ADW_SCSI_CFG1_EXT16_MASK) == 0) { 645 cable_count++; 646 wide_cable_count++; 647 } else if ((scsicfg1 & ADW_SCSI_CFG1_EXT8_MASK) == 0) 648 cable_count++; 649 650 if (cable_count == 3) { 651 printf("%s: Illegal Cable Config!\n", 652 adw_name(adw)); 653 printf("%s: Only Two Ports may be used at " 654 "a time!\n", adw_name(adw)); 655 } else if (cable_count <= 1) { 656 /* 657 * At least two out of three cables missing. 658 * Terminate both bytes. 659 */ 660 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_H 661 | ADW_SCSI_CFG1_TERM_CTL_L; 662 } else if (wide_cable_count <= 1) { 663 /* No two 16bit cables present. High on. */ 664 term_scsicfg1 |= ADW_SCSI_CFG1_TERM_CTL_H; 665 } 666 } 667 } 668 669 /* Tell the user about our decission */ 670 switch (term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK) { 671 case ADW_SCSI_CFG1_TERM_CTL_MASK: 672 printf("High & Low SE Term Enabled, "); 673 break; 674 case ADW_SCSI_CFG1_TERM_CTL_H: 675 printf("High SE Termination Enabled, "); 676 break; 677 case ADW_SCSI_CFG1_TERM_CTL_L: 678 printf("Low SE Term Enabled, "); 679 break; 680 default: 681 break; 682 } 683 684 if ((adw->features & ADW_ULTRA2) != 0 685 && (term_scsicfg1 & ADW2_SCSI_CFG1_TERM_CTL_LVD) != 0) 686 printf("LVD Term Enabled, "); 687 688 /* 689 * Invert the TERM_CTL_H and TERM_CTL_L bits and then 690 * set 'scsicfg1'. The TERM_POL bit does not need to be 691 * referenced, because the hardware internally inverts 692 * the Termination High and Low bits if TERM_POL is set. 693 */ 694 if ((adw->features & ADW_ULTRA2) != 0) { 695 term_scsicfg1 = ~term_scsicfg1; 696 term_scsicfg1 &= ADW_SCSI_CFG1_TERM_CTL_MASK 697 | ADW2_SCSI_CFG1_TERM_CTL_LVD; 698 scsicfg1 &= ~(ADW_SCSI_CFG1_TERM_CTL_MASK 699 |ADW2_SCSI_CFG1_TERM_CTL_LVD 700 |ADW_SCSI_CFG1_BIG_ENDIAN 701 |ADW_SCSI_CFG1_TERM_POL 702 |ADW2_SCSI_CFG1_DEV_DETECT); 703 scsicfg1 |= term_scsicfg1; 704 } else { 705 term_scsicfg1 = ~term_scsicfg1 & ADW_SCSI_CFG1_TERM_CTL_MASK; 706 scsicfg1 &= ~ADW_SCSI_CFG1_TERM_CTL_MASK; 707 scsicfg1 |= term_scsicfg1 | ADW_SCSI_CFG1_TERM_CTL_MANUAL; 708 scsicfg1 |= ADW_SCSI_CFG1_FLTR_DISABLE; 709 } 710 711 /* 712 * Set SCSI_CFG1 Microcode Default Value 713 * 714 * The microcode will set the SCSI_CFG1 register using this value 715 * after it is started below. 716 */ 717 adw_lram_write_16(adw, ADW_MC_DEFAULT_SCSI_CFG1, scsicfg1); 718 719 /* 720 * Only accept selections on our initiator target id. 721 * This may change in target mode scenarios... 722 */ 723 adw_lram_write_16(adw, ADW_MC_DEFAULT_SEL_MASK, 724 (0x01 << adw->initiator_id)); 725 726 /* 727 * Tell the microcode where it can find our 728 * Initiator Command Queue (ICQ). It is 729 * currently empty hence the "stopper" address. 730 */ 731 adw->commandq = adw->free_carriers; 732 adw->free_carriers = carrierbotov(adw, adw->commandq->next_ba); 733 adw->commandq->next_ba = ADW_CQ_STOPPER; 734 adw_lram_write_32(adw, ADW_MC_ICQ, adw->commandq->carr_ba); 735 736 /* 737 * Tell the microcode where it can find our 738 * Initiator Response Queue (IRQ). It too 739 * is currently empty. 740 */ 741 adw->responseq = adw->free_carriers; 742 adw->free_carriers = carrierbotov(adw, adw->responseq->next_ba); 743 adw->responseq->next_ba = ADW_CQ_STOPPER; 744 adw_lram_write_32(adw, ADW_MC_IRQ, adw->responseq->carr_ba); 745 746 adw_outb(adw, ADW_INTR_ENABLES, 747 ADW_INTR_ENABLE_HOST_INTR|ADW_INTR_ENABLE_GLOBAL_INTR); 748 749 adw_outw(adw, ADW_PC, adw_lram_read_16(adw, ADW_MC_CODE_BEGIN_ADDR)); 750 751 return (0); 752} 753 754void 755adw_set_user_sdtr(struct adw_softc *adw, u_int tid, u_int mc_sdtr) 756{ 757 adw->user_sdtr[ADW_TARGET_GROUP(tid)] &= ~ADW_TARGET_GROUP_MASK(tid); 758 adw->user_sdtr[ADW_TARGET_GROUP(tid)] |= 759 mc_sdtr << ADW_TARGET_GROUP_SHIFT(tid); 760} 761 762u_int 763adw_get_user_sdtr(struct adw_softc *adw, u_int tid) 764{ 765 u_int mc_sdtr; 766 767 mc_sdtr = adw->user_sdtr[ADW_TARGET_GROUP(tid)]; 768 mc_sdtr &= ADW_TARGET_GROUP_MASK(tid); 769 mc_sdtr >>= ADW_TARGET_GROUP_SHIFT(tid); 770 return (mc_sdtr); 771} 772 773void 774adw_set_chip_sdtr(struct adw_softc *adw, u_int tid, u_int sdtr) 775{ 776 u_int mc_sdtr_offset; 777 u_int mc_sdtr; 778 779 mc_sdtr_offset = ADW_MC_SDTR_SPEED1; 780 mc_sdtr_offset += ADW_TARGET_GROUP(tid) * 2; 781 mc_sdtr = adw_lram_read_16(adw, mc_sdtr_offset); 782 mc_sdtr &= ~ADW_TARGET_GROUP_MASK(tid); 783 mc_sdtr |= sdtr << ADW_TARGET_GROUP_SHIFT(tid); 784 adw_lram_write_16(adw, mc_sdtr_offset, mc_sdtr); 785} 786 787u_int 788adw_get_chip_sdtr(struct adw_softc *adw, u_int tid) 789{ 790 u_int mc_sdtr_offset; 791 u_int mc_sdtr; 792 793 mc_sdtr_offset = ADW_MC_SDTR_SPEED1; 794 mc_sdtr_offset += ADW_TARGET_GROUP(tid) * 2; 795 mc_sdtr = adw_lram_read_16(adw, mc_sdtr_offset); 796 mc_sdtr &= ADW_TARGET_GROUP_MASK(tid); 797 mc_sdtr >>= ADW_TARGET_GROUP_SHIFT(tid); 798 return (mc_sdtr); 799} 800 801u_int 802adw_find_sdtr(struct adw_softc *adw, u_int period) 803{ 804 int i; 805 806 i = 0; 807 if ((adw->features & ADW_DT) == 0) 808 i = ADW_MC_SDTR_OFFSET_ULTRA2; 809 if ((adw->features & ADW_ULTRA2) == 0) 810 i = ADW_MC_SDTR_OFFSET_ULTRA; 811 if (period == 0) 812 return ADW_MC_SDTR_ASYNC; 813 814 for (; i < adw_num_syncrates; i++) { 815 if (period <= adw_syncrates[i].period) 816 return (adw_syncrates[i].mc_sdtr); 817 } 818 return ADW_MC_SDTR_ASYNC; 819} 820 821u_int 822adw_find_period(struct adw_softc *adw, u_int mc_sdtr) 823{ 824 int i; 825 826 for (i = 0; i < adw_num_syncrates; i++) { 827 if (mc_sdtr == adw_syncrates[i].mc_sdtr) 828 break; 829 } 830 return (adw_syncrates[i].period); 831} 832 833u_int 834adw_hshk_cfg_period_factor(u_int tinfo) 835{ 836 tinfo &= ADW_HSHK_CFG_RATE_MASK; 837 tinfo >>= ADW_HSHK_CFG_RATE_SHIFT; 838 if (tinfo == 0x11) 839 /* 80MHz/DT */ 840 return (9); 841 else if (tinfo == 0x10) 842 /* 40MHz */ 843 return (10); 844 else 845 return (((tinfo * 25) + 50) / 4); 846} 847 848/* 849 * Send an idle command to the chip and wait for completion. 850 */ 851adw_idle_cmd_status_t 852adw_idle_cmd_send(struct adw_softc *adw, adw_idle_cmd_t cmd, u_int parameter) 853{ 854 u_int timeout; 855 adw_idle_cmd_status_t status; 856 int s; 857 858 s = splcam(); 859 860 /* 861 * Clear the idle command status which is set by the microcode 862 * to a non-zero value to indicate when the command is completed. 863 */ 864 adw_lram_write_16(adw, ADW_MC_IDLE_CMD_STATUS, 0); 865 866 /* 867 * Write the idle command value after the idle command parameter 868 * has been written to avoid a race condition. If the order is not 869 * followed, the microcode may process the idle command before the 870 * parameters have been written to LRAM. 871 */ 872 adw_lram_write_32(adw, ADW_MC_IDLE_CMD_PARAMETER, parameter); 873 adw_lram_write_16(adw, ADW_MC_IDLE_CMD, cmd); 874 875 /* 876 * Tickle the RISC to tell it to process the idle command. 877 */ 878 adw_tickle_risc(adw, ADW_TICKLE_B); 879 880 /* Wait for up to 10 seconds for the command to complete */ 881 timeout = 5000000; 882 while (--timeout) { 883 status = adw_lram_read_16(adw, ADW_MC_IDLE_CMD_STATUS); 884 if (status != 0) 885 break; 886 DELAY(20); 887 } 888 889 if (timeout == 0) 890 panic("%s: Idle Command Timed Out!\n", adw_name(adw)); 891 splx(s); 892 return (status); 893} 894