1/*- 2******************************************************************************* 3Copyright (C) 2015 Annapurna Labs Ltd. 4 5This file may be licensed under the terms of the Annapurna Labs Commercial 6License Agreement. 7 8Alternatively, this file can be distributed under the terms of the GNU General 9Public License V2 as published by the Free Software Foundation and can be 10found at http://www.gnu.org/licenses/gpl-2.0.html 11 12Alternatively, redistribution and use in source and binary forms, with or 13without modification, are permitted provided that the following conditions are 14met: 15 16 * Redistributions of source code must retain the above copyright notice, 17this list of conditions and the following disclaimer. 18 19 * Redistributions in binary form must reproduce the above copyright 20notice, this list of conditions and the following disclaimer in 21the documentation and/or other materials provided with the 22distribution. 23 24THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 25ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 26WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 27DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 28ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 29(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 30LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 31ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 32(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 33SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 34 35*******************************************************************************/ 36 37/** 38 * @defgroup group_udma_interrupts UDMA I/O Fabric Interrupt Controller 39 * @ingroup group_udma_api 40 * UDMA IOFIC API 41 * @{ 42 * @file al_hal_udma_iofic.h 43 * 44 * @brief C Header file for programming the interrupt controller that found 45 * in UDMA based units. These APIs rely and use some the Interrupt controller 46 * API under al_hal_iofic.h 47 */ 48 49#ifndef __AL_HAL_UDMA_IOFIC_H__ 50#define __AL_HAL_UDMA_IOFIC_H__ 51 52#include <al_hal_common.h> 53#include <al_hal_iofic.h> 54#include <al_hal_udma_regs.h> 55 56/* *INDENT-OFF* */ 57#ifdef __cplusplus 58extern "C" { 59#endif 60/* *INDENT-ON* */ 61 62/** 63 * Interrupt Mode 64 * This is the interrupt mode for the primary interrupt level The secondary 65 * interrupt level does not have mode and it is always a level sensitive 66 * interrupt that is reflected in group D of the primary. 67 */ 68enum al_iofic_mode { 69 AL_IOFIC_MODE_LEGACY, /**< level-sensitive interrupt wire */ 70 AL_IOFIC_MODE_MSIX_PER_Q, /**< per UDMA queue MSI-X interrupt */ 71 AL_IOFIC_MODE_MSIX_PER_GROUP 72}; 73 74/** interrupt controller level (primary/secondary) */ 75enum al_udma_iofic_level { 76 AL_UDMA_IOFIC_LEVEL_PRIMARY, 77 AL_UDMA_IOFIC_LEVEL_SECONDARY 78}; 79 80/* 81 * The next four groups represents the standard 4 groups in the primary 82 * interrupt controller of each bus-master unit in the I/O Fabric. 83 * The first two groups can be used when accessing the secondary interrupt 84 * controller as well. 85 */ 86#define AL_INT_GROUP_A 0 /**< summary of the below events */ 87#define AL_INT_GROUP_B 1 /**< RX completion queues */ 88#define AL_INT_GROUP_C 2 /**< TX completion queues */ 89#define AL_INT_GROUP_D 3 /**< Misc */ 90 91/******************************************************************************* 92 * Primary interrupt controller, group A bits 93 ******************************************************************************/ 94/* Group A bits which are just summary bits of GROUP B, C and D */ 95#define AL_INT_GROUP_A_GROUP_B_SUM AL_BIT(0) 96#define AL_INT_GROUP_A_GROUP_C_SUM AL_BIT(1) 97#define AL_INT_GROUP_A_GROUP_D_SUM AL_BIT(2) 98 99/******************************************************************************* 100 * MSIX entry indices 101 ******************************************************************************/ 102/** MSIX entry index for summary of group D in group A */ 103#define AL_INT_MSIX_GROUP_A_SUM_D_IDX 2 104/** MSIX entry index for RX completion queue 0 */ 105#define AL_INT_MSIX_RX_COMPLETION_START 3 106 107/******************************************************************************* 108 * Primary interrupt controller, group D bits 109 ******************************************************************************/ 110#define AL_INT_GROUP_D_CROSS_MAIL_BOXES \ 111 (AL_BIT(0) | AL_BIT(1) | AL_BIT(2) | AL_BIT(3)) 112/** Summary of secondary interrupt controller, group A) */ 113#define AL_INT_GROUP_D_M2S AL_BIT(8) 114/** Summary of secondary interrupt controller, group B) */ 115#define AL_INT_GROUP_D_S2M AL_BIT(9) 116#define AL_INT_GROUP_D_SW_TIMER_INT AL_BIT(10) 117#define AL_INT_GROUP_D_APP_EXT_INT AL_BIT(11) 118#define AL_INT_GROUP_D_ALL \ 119 AL_INT_GROUP_D_CROSS_MAIL_BOXES | \ 120 AL_INT_GROUP_D_M2S | \ 121 AL_INT_GROUP_D_S2M | \ 122 AL_INT_GROUP_D_SW_TIMER_INT | \ 123 AL_INT_GROUP_D_APP_EXT_INT 124 125/* 126 * Until this point, all description above is for Groups A/B/C/D in the PRIMARY 127 * Interrupt controller. 128 * Following are definitions related to the secondary interrupt controller with 129 * two cause registers (group A and group B) that covers UDMA M2S/S2M errors. 130 * Secondary interrupt controller summary bits are not mapped to the Processor 131 * GIC directly, rather they are represented in Group D of the primary interrupt 132 * controller. 133 */ 134 135/****************************************************************************** 136 * Secondary interrupt Controller, Group A, which holds the TX (M2S) error 137 * interrupt bits 138 ******************************************************************************/ 139 140/** 141 * MSIx response 142 * MSIX Bus generator response error, the Bus response received with error indication 143 */ 144#define AL_INT_2ND_GROUP_A_M2S_MSIX_RESP AL_BIT(27) 145/** 146 * MSIx timeout MSIX Bus generator timeout error. 147 * The generator didn't receive bus response for the MSIx write transaction. 148 */ 149#define AL_INT_2ND_GROUP_A_M2S_MSIX_TO AL_BIT(26) 150/** Prefetch header buffer parity error */ 151#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_HDR_PARITY AL_BIT(25) 152/** Prefetch descriptor buffer parity error */ 153#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_DESC_PARITY AL_BIT(24) 154/** Data buffer parity error */ 155#define AL_INT_2ND_GROUP_A_M2S_DATA_PARITY AL_BIT(23) 156/** Data header buffer parity error */ 157#define AL_INT_2ND_GROUP_A_M2S_HDR_PARITY AL_BIT(22) 158/** Completion coalescing buffer parity error */ 159#define AL_INT_2ND_GROUP_A_M2S_COMPL_COAL_PARITY AL_BIT(21) 160/** UNACK packets buffer parity error */ 161#define AL_INT_2ND_GROUP_A_M2S_UNACK_PKT_PARITY AL_BIT(20) 162/** ACK packets buffer parity error */ 163#define AL_INT_2ND_GROUP_A_M2S_ACK_PKT_PARITY AL_BIT(19) 164/** AXI data buffer parity error */ 165#define AL_INT_2ND_GROUP_A_M2S_AX_DATA_PARITY AL_BIT(18) 166/** 167 * Prefetch Ring ID error 168 * A wrong RingId was received while prefetching submission descriptor. This 169 * could indicate a software bug or hardware failure, unless the UDMA is 170 * working in a mode to ignore RingId (the al_udma_iofic_config() API can be 171 * used to configure the UDMA to ignore the Ring ID check) 172 */ 173#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_RING_ID AL_BIT(17) 174/** 175 * Prefetch last 176 * Error in last bit indication of the descriptor 177 * Descriptor with Last bit asserted is read from the queue to the prefetch 178 * FIFO when the prefetch engine is not in a middle of packet processing (a 179 * descriptor with First bit asserted should be read first to indicate start of 180 * packet) 181 */ 182#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_LAST AL_BIT(16) 183/** 184 * Prefetch first 185 * Error in first bit indication of the descriptor 186 * Descriptor with First bit asserted is read from the queue to the prefetch 187 * FIFO while the prefetch engine is in a middle of packet processing ( a 188 * descriptor with Last bit asserted should be read to indicate end of packet 189 * before starting a new one) 190 */ 191#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_FIRST AL_BIT(15) 192/** 193 * Prefetch max descriptors 194 * Number of descriptors per packet exceeds the configurable maximum 195 * descriptors per packet. This could indicate a software bug or a hardware 196 * failure. (The al_udma_m2s_max_descs_set() API is used to configure the 197 * maximum descriptors per packet) 198 */ 199#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_MAX_DESC AL_BIT(14) 200/** 201 * Packet length 202 * Packet length exceeds the configurable maximum packet size. The 203 * al_udma_m2s_packet_size_cfg_set() API is used to configure the maximum 204 * packet size) 205 */ 206#define AL_INT_2ND_GROUP_A_M2S_PKT_LEN AL_BIT(13) 207/** 208 * Prefetch AXI timeout 209 * Bus request to I/O Fabric timeout error 210 */ 211#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_AXI_TO AL_BIT(12) 212/** 213 * Prefetch AXI response 214 * Bus response from I/O Fabric error 215 */ 216#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_AXI_RESP AL_BIT(11) 217/** 218 * Prefetch AXI parity 219 * Bus parity error on descriptor being prefetched 220 */ 221#define AL_INT_2ND_GROUP_A_M2S_PREFETCH_AXI_PARITY AL_BIT(10) 222/** 223 * Data AXI timeout 224 * Bus request to I/O Fabric timeout error 225 */ 226#define AL_INT_2ND_GROUP_A_M2S_DATA_AXI_TO AL_BIT(9) 227/** 228 * Data AXI response 229 * Bus response from I/O Fabric error 230 */ 231#define AL_INT_2ND_GROUP_A_M2S_DATA_AXI_RESP AL_BIT(8) 232/** 233 * Data AXI parity 234 * Bus parity error on data being read 235 */ 236#define AL_INT_2ND_GROUP_A_M2S_DATA_AXI_PARITY AL_BIT(7) 237/** 238 * Completion AXI timeout 239 * Bus request to I/O Fabric timeout error 240 */ 241#define AL_INT_2ND_GROUP_A_M2S_CONPL_AXI_TO AL_BIT(6) 242/** 243 * Completion AXI response 244 * Bus response from I/O Fabric error 245 */ 246#define AL_INT_2ND_GROUP_A_M2S_COMPL_AXI_RESP AL_BIT(5) 247/** 248 * Completion AXI parity 249 * Bus generator internal SRAM parity error 250 */ 251#define AL_INT_2ND_GROUP_A_M2S_COMP_AXI_PARITY AL_BIT(4) 252/** 253 * Stream timeout 254 * Application stream interface timeout indicating a failure at the Application 255 * layer (RAID, Ethernet etc) 256 */ 257#define AL_INT_2ND_GROUP_A_M2S_STRM_TO AL_BIT(3) 258/** 259 * Stream response 260 * Application stream interface response error indicating a failure at the 261 * Application layer (RAID, Ethernet etc) 262 */ 263#define AL_INT_2ND_GROUP_A_M2S_STRM_RESP AL_BIT(2) 264/** 265 * Stream parity 266 * Application stream interface parity error indicating a failure at the 267 * Application layer (RAID, Ethernet etc) 268 */ 269#define AL_INT_2ND_GROUP_A_M2S_STRM_PARITY AL_BIT(1) 270/** 271 * Stream completion mismatch 272 * Application stream interface, packet serial mismatch error indicating a 273 * failure at the Application layer (RAID, Ethernet etc) 274 */ 275#define AL_INT_2ND_GROUP_A_M2S_STRM_COMPL_MISMATCH AL_BIT(0) 276 277/******************************************************************************* 278 * Secondary interrupt Controller, Group B, which holds the RX (S2M) error 279 * interrupt bits 280 ******************************************************************************/ 281 282/** Prefetch descriptor buffer parity error */ 283#define AL_INT_2ND_GROUP_B_S2M_PREFETCH_DESC_PARITY AL_BIT(30) 284/** Completion coalescing buffer parity error */ 285#define AL_INT_2ND_GROUP_B_S2M_COMPL_COAL_PARITY AL_BIT(29) 286/** PRE-UNACK packets buffer parity error */ 287#define AL_INT_2ND_GROUP_B_S2M_PRE_UNACK_PKT_PARITY AL_BIT(28) 288/** UNACK packets buffer parity error */ 289#define AL_INT_2ND_GROUP_B_S2M_UNACK_PKT_PARITY AL_BIT(27) 290/** Data buffer parity error */ 291#define AL_INT_2ND_GROUP_B_S2M_DATA_PARITY AL_BIT(26) 292/** Data header buffer parity error */ 293#define AL_INT_2ND_GROUP_B_S2M_DATA_HDR_PARITY AL_BIT(25) 294/** 295 * Packet length 296 * Application stream interface, Data counter length mismatch with metadata 297 * packet length indicating a failure at the Application layer (RAID, Ethernet 298 * etc) 299 */ 300#define AL_INT_2ND_GROUP_B_S2M_PKT_LEN AL_BIT(24) 301/** 302 * Stream last 303 * Application stream interface, error in Last bit indication, this error is 304 * asserted when a 'last' indication is asserted on the stream interface 305 * (between the application and the UDMA) when the interface is not in the 306 * middle of packet, meaning that there was no 'first' indication before. This 307 * indicates a failure at the application layer. 308 */ 309#define AL_INT_2ND_GROUP_B_S2M_STRM_LAST AL_BIT(23) 310/** 311 * Stream first 312 * Application stream interface error in first bit indication, this error is 313 * asserted when a 'first' indication is asserted on the stream interface 314 * (between the application and the UDMA) when the interface is in the middle 315 * of packet, meaning that there was a 'first' indication before and the UDMA 316 * is waiting for a 'last' indication to end the packet. This indicates a 317 * failure at the application layer. 318 */ 319#define AL_INT_2ND_GROUP_B_S2M_STRM_FIRST AL_BIT(22) 320/** 321 * Stream data 322 * Application stream interface, error indication during data transaction 323 */ 324#define AL_INT_2ND_GROUP_B_S2M_STRM_DATA AL_BIT(21) 325/** 326 * Stream Data parity 327 * Application stream interface, parity error during data transaction 328 */ 329#define AL_INT_2ND_GROUP_B_S2M_STRM_DATA_PARITY AL_BIT(20) 330/** 331 * Stream Header error 332 * Application stream interface, error indication during header transaction 333 */ 334#define AL_INT_2ND_GROUP_B_S2M_STRM_HDR AL_BIT(19) 335/** 336 * Stream Header parity 337 * Application stream interface, parity error during header transaction 338 */ 339#define AL_INT_2ND_GROUP_B_S2M_STRM_HDR_PARITY AL_BIT(18) 340/** 341 * Completion UNACK 342 * Completion write, UNACK timeout due to completion FIFO back pressure 343 */ 344#define AL_INT_2ND_GROUP_B_S2M_COMPL_UNACK AL_BIT(17) 345/** 346 * Completion stream 347 * Completion write, UNACK timeout due to stream ACK FIFO back pressure 348 */ 349#define AL_INT_2ND_GROUP_B_S2M_COMPL_STRM AL_BIT(16) 350/** 351 * Completion AXI timeout 352 * Bus request to I/O Fabric timeout error 353 */ 354#define AL_INT_2ND_GROUP_B_S2M_COMPL_AXI_TO AL_BIT(15) 355/** 356 * Completion AXI response 357 * Bus response from I/O Fabric error 358 */ 359#define AL_INT_2ND_GROUP_B_S2M_COMPL_AXI_RESP AL_BIT(14) 360/** 361 * Completion AXI parity 362 * Completion Bus generator internal SRAM parity error 363 */ 364#define AL_INT_2ND_GROUP_B_S2M_COMPL_AXI_PARITY AL_BIT(13) 365/** 366 * Prefetch saturate 367 * Prefetch engine, packet length counter saturated (32 bit) , this is caused 368 * by an error at the application layer which sends packet data without 369 * 'last'/'first' indication. 370 */ 371#define AL_INT_2ND_GROUP_B_S2M_PREFETCH_SAT AL_BIT(12) 372/** 373 * Prefetch ring ID 374 * Prefetch engine, Ring ID is not matching the expected RingID. This could 375 * indicate a software bug or hardware failure, unless the UDMA is working in a 376 * mode to ignore RingId (the al_udma_iofic_config() API can be used to 377 * configure the UDMA to ignore the Ring ID check) 378 */ 379#define AL_INT_2ND_GROUP_B_S2M_PREFETCH_RING_ID AL_BIT(11) 380/** 381 * Prefetch AXI timeout 382 * Bus request to I/O Fabric timeout error 383 */ 384#define AL_INT_2ND_GROUP_B_S2M_PREFETCH_AXI_TO AL_BIT(10) 385/** 386 * Prefetch AXI response 387 * Bus response from I/O Fabric error 388 */ 389#define AL_INT_2ND_GROUP_B_S2M_PREFETCH_AXI_RESP AL_BIT(9) 390/** 391 * Prefetch AXI parity 392 * Bus parity error on descriptor being prefetched 393 */ 394#define AL_INT_2ND_GROUP_B_S2M_PREFETCH_AXI_PARITY AL_BIT(8) 395/** 396 * No descriptors hint 397 * Data write, Hint to the SW that there are not enough descriptors in the 398 * queue for the current received packet. This is considered a hint and not an 399 * error, as it could be a normal situation in certain application. The S2M 400 * UDMA behavior when it runs out of Rx Descriptor is controlled by driver 401 * which can use this hint to add more descriptors to the Rx queue. 402 */ 403#define AL_INT_2ND_GROUP_B_S2M_NO_DESC_HINT AL_BIT(7) 404/** 405 * No descriptors timeout 406 * Data write, Timeout indication when there are not enough descriptors for the 407 * current packet and the timeout expires. The S2M UDMA behavior when it runs 408 * out of Rx Descriptor is controlled by driver which can use this hint to add 409 * more descriptors to the Rx queue. The al_udma_s2m_no_desc_cfg_set() is used 410 * to configure theUDMA S2M timeout and behavior when there are no Rx 411 * descriptors for the received packet. 412 */ 413#define AL_INT_2ND_GROUP_B_S2M_NO_DESC_TO AL_BIT(6) 414/** 415 * Promotion indication 416 * Data write, the data write engine checks the queue number of the two packets 417 * at the head of the data FIFO, the data write engine notify the prefetch 418 * engine to promote these queue numbers in the prefetch scheduler to make sure 419 * that these queue will have RX descriptors for these packets. This error 420 * indicates that the prefetch promotion didn't work for the second packet in 421 * the FIFO. This is an indication used for system debug and not an error. 422 */ 423#define AL_INT_2ND_GROUP_B_S2M_PROM_IND AL_BIT(5) 424/** 425 * Header split ignored 426 * Data write, The application requested header split but the buffer descriptor 427 * doesn't include a second buffer for the header 428 */ 429#define AL_INT_2ND_GROUP_B_S2M_HDR_SPLT_IGNORED AL_BIT(4) 430/** 431 * Header split length 432 * Data write, The application requested header split and the length of the 433 * second buffer allocated for the header is not enough for the requested 434 * header length. The remaining of the header is written to buffer 1 (data 435 * buffer). 436 */ 437#define AL_INT_2ND_GROUP_B_S2M_HDR_SPLT_LEN AL_BIT(3) 438/** 439 * Data AXI timeout 440 * Bus request to I/O Fabric timeout error 441 */ 442#define AL_INT_2ND_GROUP_B_S2M_DATA_AXI_TO AL_BIT(2) 443/** 444 * Data AXI response 445 * Bus response from I/O Fabric error 446 */ 447#define AL_INT_2ND_GROUP_B_S2M_DATA_AXI_RESP AL_BIT(1) 448/** 449 * Data AXI parity 450 * Bus parity error on data being read 451 */ 452#define AL_INT_2ND_GROUP_B_S2M_DATA_AXI_PARITY AL_BIT(0) 453 454/******************************************************************************* 455 * Configurations 456 ******************************************************************************/ 457 458/** 459 * Configure the UDMA interrupt controller registers, interrupts will are kept 460 * masked. 461 * This is a static setting that should be called while initialized the 462 * interrupt controller within a given UDMA, and should not be modified during 463 * runtime unless the UDMA is completely disabled. The first argument sets the 464 * interrupt and MSIX modes. The m2s/s2m errors/abort are a set of bit-wise 465 * masks to define the behaviour of the UDMA once an error happens: The _abort 466 * will put the UDMA in abort state once an error happens The _error bitmask 467 * will indicate and error in the secondary cause register but will not abort. 468 * The bit-mask that the _errors_disable and _aborts_disable are described in 469 * 'AL_INT_2ND_GROUP_A_*' and 'AL_INT_2ND_GROUP_B_*' 470 * 471 * @param regs pointer to unit registers 472 * @param mode interrupt scheme mode (legacy, MSI-X..) 473 * @param m2s_errors_disable 474 * This is a bit-wise mask, to indicate which one of the error causes in 475 * secondary interrupt group_A should generate an interrupt. When a bit is 476 * set, the error cause is ignored. 477 * Recommended value: 0 (enable all errors). 478 * @param m2s_aborts_disable 479 * This is a bit-wise mask, to indicate which one of the error causes in 480 * secondary interrupt group_A should automatically put the UDMA in 481 * abort state. When a bit is set, the error cause does cause an abort. 482 * Recommended value: 0 (enable all aborts). 483 * @param s2m_errors_disable 484 * This is a bit-wise mask, to indicate which one of the error causes in 485 * secondary interrupt group_A should generate an interrupt. When a bit is 486 * set, the error cause is ignored. 487 * Recommended value: 0xE0 (disable hint errors). 488 * @param s2m_aborts_disable 489 * This is a bit-wise mask, to indicate which one of the error causes in 490 * secondary interrupt group_A should automatically put the UDMA in 491 * abort state. When a bit is set, the error cause does cause an abort. 492 * Recommended value: 0xE0 (disable hint aborts). 493 * 494 * @return 0 on success. -EINVAL otherwise. 495 */ 496int al_udma_iofic_config(struct unit_regs __iomem *regs, 497 enum al_iofic_mode mode, 498 uint32_t m2s_errors_disable, 499 uint32_t m2s_aborts_disable, 500 uint32_t s2m_errors_disable, 501 uint32_t s2m_aborts_disable); 502/** 503 * return the offset of the unmask register for a given group. 504 * this function can be used when the upper layer wants to directly 505 * access the unmask regiter and bypass the al_udma_iofic_unmask() API. 506 * 507 * @param regs pointer to udma registers 508 * @param level the interrupt controller level (primary / secondary) 509 * @param group the interrupt group ('AL_INT_GROUP_*') 510 * @return the offset of the unmask register. 511 */ 512uint32_t __iomem * al_udma_iofic_unmask_offset_get( 513 struct unit_regs __iomem *regs, 514 enum al_udma_iofic_level level, 515 int group); 516 517/** 518 * Get the interrupt controller base address for either the primary or secondary 519 * interrupt controller 520 * 521 * @param regs pointer to udma unit registers 522 * @param level the interrupt controller level (primary / secondary) 523 * 524 * @returns The interrupt controller base address 525 * 526 */ 527static INLINE void __iomem *al_udma_iofic_reg_base_get( 528 struct unit_regs __iomem *regs, 529 enum al_udma_iofic_level level) 530{ 531 void __iomem *iofic_regs = (level == AL_UDMA_IOFIC_LEVEL_PRIMARY) ? 532 (void __iomem *)®s->gen.interrupt_regs.main_iofic : 533 (void __iomem *)®s->gen.interrupt_regs.secondary_iofic_ctrl; 534 535 return iofic_regs; 536} 537 538/** 539 * Check the interrupt controller level/group validity 540 * 541 * @param level the interrupt controller level (primary / secondary) 542 * @param group the interrupt group ('AL_INT_GROUP_*') 543 * 544 * @returns 0 - invalid, 1 - valid 545 * 546 */ 547static INLINE int al_udma_iofic_level_and_group_valid( 548 enum al_udma_iofic_level level, 549 int group) 550{ 551 if (((level == AL_UDMA_IOFIC_LEVEL_PRIMARY) && (group >= 0) && (group < 4)) || 552 ((level == AL_UDMA_IOFIC_LEVEL_SECONDARY) && (group >= 0) && (group < 2))) 553 return 1; 554 555 return 0; 556} 557/** 558 * unmask specific interrupts for a given group 559 * this functions uses the interrupt mask clear register to guarantee atomicity 560 * it's safe to call it while the mask is changed by the HW (auto mask) or another cpu. 561 * 562 * @param regs pointer to udma unit registers 563 * @param level the interrupt controller level (primary / secondary) 564 * @param group the interrupt group ('AL_INT_GROUP_*') 565 * @param mask bitwise of interrupts to unmask, set bits will be unmasked. 566 */ 567static INLINE void al_udma_iofic_unmask( 568 struct unit_regs __iomem *regs, 569 enum al_udma_iofic_level level, 570 int group, 571 uint32_t mask) 572{ 573 al_assert(al_udma_iofic_level_and_group_valid(level, group)); 574 al_iofic_unmask(al_udma_iofic_reg_base_get(regs, level), group, mask); 575} 576 577/** 578 * mask specific interrupts for a given group 579 * this functions modifies interrupt mask register, the callee must make sure 580 * the mask is not changed by another cpu. 581 * 582 * @param regs pointer to udma unit registers 583 * @param level the interrupt controller level (primary / secondary) 584 * @param group the interrupt group ('AL_INT_GROUP_*') 585 * @param mask bitwise of interrupts to mask, set bits will be masked. 586 */ 587static INLINE void al_udma_iofic_mask( 588 struct unit_regs __iomem *regs, 589 enum al_udma_iofic_level level, 590 int group, 591 uint32_t mask) 592{ 593 al_assert(al_udma_iofic_level_and_group_valid(level, group)); 594 al_iofic_mask(al_udma_iofic_reg_base_get(regs, level), group, mask); 595} 596 597/** 598 * read interrupt cause register for a given group 599 * this will clear the set bits if the Clear on Read mode enabled. 600 * @param regs pointer to udma unit registers 601 * @param level the interrupt controller level (primary / secondary) 602 * @param group the interrupt group ('AL_INT_GROUP_*') 603 */ 604static INLINE uint32_t al_udma_iofic_read_cause( 605 struct unit_regs __iomem *regs, 606 enum al_udma_iofic_level level, 607 int group) 608{ 609 al_assert(al_udma_iofic_level_and_group_valid(level, group)); 610 return al_iofic_read_cause(al_udma_iofic_reg_base_get(regs, level), group); 611} 612 613#endif 614/** @} end of UDMA group */ 615