kmod.mk revision 78161 
1#	From: @(#)bsd.prog.mk	5.26 (Berkeley) 6/25/91
2# $FreeBSD: head/sys/conf/kmod.mk 78161 2001-06-13 10:58:39Z peter $
3#
4# The include file <bsd.kmod.mk> handles installing Kernel Loadable Device
5# drivers (KLD's).
6#
7#
8# +++ variables +++
9#
10# CLEANFILES	Additional files to remove for the clean and cleandir targets.
11#
12# DISTRIBUTION  Name of distribution. [bin]
13#
14# KMOD          The name of the kernel module to build.
15#
16# KMODDIR	Base path for kernel modules (see kld(4)). [/boot/kernel]
17#
18# KMODOWN	KLD owner. [${BINOWN}]
19#
20# KMODGRP	KLD group. [${BINGRP}]
21#
22# KMODMODE	KLD mode. [${BINMODE}]
23#
24# LINKS		The list of KLD links; should be full pathnames, the
25#               linked-to file coming first, followed by the linked
26#               file.  The files are hard-linked.  For example, to link
27#               /modules/master and /modules/meister, use:
28#
29#			LINKS=  /modules/master /modules/meister
30#
31# KMODLOAD	Command to load a kernel module [/sbin/kldload]
32#
33# KMODUNLOAD	Command to unload a kernel module [/sbin/kldunload]
34#
35# NOMAN		KLD does not have a manual page if set.
36#
37# PROG          The name of the kernel module to build.
38#		If not supplied, ${KMOD}.o is used.
39#
40# SRCS          List of source files
41#
42# SUBDIR        A list of subdirectories that should be built as well.
43#               Each of the targets will execute the same target in the
44#               subdirectories.
45#
46# SYMLINKS	Same as LINKS, except it creates symlinks and the
47#		linked-to pathname may be relative.
48#
49# DESTDIR, DISTDIR are set by other Makefiles (e.g. bsd.own.mk)
50#
51# MFILES	Optionally a list of interfaces used by the module.
52#		This file contains a default list of interfaces.
53#
54# +++ targets +++
55#
56#       distribute:
57#               This is a variant of install, which will
58#               put the stuff into the right "distribution".
59#
60# 	install:
61#               install the program and its manual pages; if the Makefile
62#               does not itself define the target install, the targets
63#               beforeinstall and afterinstall may also be used to cause
64#               actions immediately before and after the install target
65#		is executed.
66#
67# 	load:
68#		Load KLD.
69#
70# 	unload:
71#		Unload KLD.
72#
73# bsd.obj.mk: clean, cleandir and obj
74# bsd.dep.mk: cleandepend, depend and tags
75# bsd.man.mk: maninstall
76#
77
78KMODLOAD?=	/sbin/kldload
79KMODUNLOAD?=	/sbin/kldunload
80
81TARGET_ARCH?=	${MACHINE_ARCH}
82
83.if !target(__initialized__)
84__initialized__:
85.if exists(${.CURDIR}/../Makefile.inc)
86.include "${.CURDIR}/../Makefile.inc"
87.endif
88.endif
89
90.SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S
91
92CFLAGS+=	${COPTS} -D_KERNEL ${CWARNFLAGS}
93CFLAGS+=	-DKLD_MODULE
94
95# Don't use any standard or source-relative include directories.
96# Since -nostdinc will annull any previous -I paths, we repeat all
97# such paths after -nostdinc.  It doesn't seem to be possible to
98# add to the front of `make' variable.
99_ICFLAGS:=	${CFLAGS:M-I*}
100CFLAGS+=	-nostdinc -I- ${INCLMAGIC} ${_ICFLAGS}
101
102# Add -I paths for system headers.  Individual KLD makefiles don't
103# need any -I paths for this.  Similar defaults for .PATH can't be
104# set because there are no standard paths for non-headers.
105CFLAGS+=	-I. -I@ -I@/dev
106
107# Add a -I path to standard headers like <stddef.h>.  Use a relative
108# path to src/include if possible.  If the @ symlink hasn't been built
109# yet, then we can't tell if the relative path exists.  Add both the
110# potential relative path and an absolute path in that case.
111.if exists(@)
112.if exists(@/../include)
113CFLAGS+=	-I@/../include
114.else
115CFLAGS+=	-I${DESTDIR}/usr/include
116.endif
117.else # !@
118CFLAGS+=	-I@/../include -I${DESTDIR}/usr/include
119.endif # @
120
121CFLAGS+=	${DEBUG_FLAGS}
122
123.if ${OBJFORMAT} == elf
124CLEANFILES+=	setdef0.c setdef1.c setdefs.h
125CLEANFILES+=	setdef0.o setdef1.o
126.endif
127
128OBJS+=  ${SRCS:N*.h:R:S/$/.o/g}
129
130.if !defined(PROG)
131PROG=	${KMOD}.ko
132.endif
133
134${PROG}: ${KMOD}.kld
135	${LD} -Bshareable ${LDFLAGS} -o ${.TARGET} ${KMOD}.kld
136
137${KMOD}.kld: ${OBJS}
138	${LD} ${LDFLAGS} -r -o ${.TARGET} ${OBJS}
139
140.if !defined(NOMAN)
141.if 0
142MAN?=	${KMOD}.4
143.endif
144.include <bsd.man.mk>
145.else
146.if !target(all-man)
147all-man: _SUBDIR
148.endif
149.if !target(maninstall)
150maninstall: _SUBDIR
151.endif
152.endif
153
154_ILINKS=@ machine
155
156.MAIN: all
157all: objwarn ${PROG} all-man _SUBDIR
158
159beforedepend: ${_ILINKS}
160	@rm -f .depend
161
162# Ensure that the links exist without depending on it when it exists which
163# causes all the modules to be rebuilt when the directory pointed to changes.
164.for _link in ${_ILINKS}
165.if !exists(${.OBJDIR}/${_link})
166${OBJS}: ${_link}
167.endif
168.endfor
169
170# Search for kernel source tree in standard places.
171.for _dir in ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys
172.if !defined(SYSDIR) && exists(${_dir}/kern/)
173SYSDIR=	${_dir}
174.endif
175.endfor
176.if !defined(SYSDIR) || !exists(${SYSDIR}/kern)
177.error "can't find kernel source tree"
178.endif
179
180${_ILINKS}:
181	@case ${.TARGET} in \
182	machine) \
183		path=${SYSDIR}/${MACHINE_ARCH}/include ;; \
184	@) \
185		path=${SYSDIR} ;; \
186	esac ; \
187	path=`(cd $$path && /bin/pwd)` ; \
188	${ECHO} ${.TARGET} "->" $$path ; \
189	ln -s $$path ${.TARGET}
190
191CLEANFILES+= ${PROG} ${KMOD}.kld ${OBJS} ${_ILINKS} symb.tmp tmp.o
192
193.if !target(install)
194.if !target(beforeinstall)
195beforeinstall:
196.endif
197.if !target(afterinstall)
198afterinstall:
199.endif
200
201_INSTALLFLAGS:=	${INSTALLFLAGS}
202.for ie in ${INSTALLFLAGS_EDIT}
203_INSTALLFLAGS:=	${_INSTALLFLAGS${ie}}
204.endfor
205
206realinstall: _SUBDIR
207	${INSTALL} ${COPY} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
208	    ${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}
209.if defined(LINKS) && !empty(LINKS)
210	@set ${LINKS}; \
211	while test $$# -ge 2; do \
212		l=${DESTDIR}$$1; \
213		shift; \
214		t=${DESTDIR}$$1; \
215		shift; \
216		${ECHO} $$t -\> $$l; \
217		ln -f $$l $$t; \
218	done; true
219.endif
220.if defined(SYMLINKS) && !empty(SYMLINKS)
221	@set ${SYMLINKS}; \
222	while test $$# -ge 2; do \
223		l=$$1; \
224		shift; \
225		t=${DESTDIR}$$1; \
226		shift; \
227		${ECHO} $$t -\> $$l; \
228		ln -fs $$l $$t; \
229	done; true
230.endif
231
232install: afterinstall _SUBDIR
233.if !defined(NOMAN)
234afterinstall: realinstall maninstall
235.else
236afterinstall: realinstall
237.endif
238realinstall: beforeinstall
239.endif
240
241DISTRIBUTION?=	bin
242.if !target(distribute)
243distribute: _SUBDIR
244.for dist in ${DISTRIBUTION}
245	cd ${.CURDIR} ; $(MAKE) install DESTDIR=${DISTDIR}/${dist} SHARED=copies
246.endfor
247.endif
248
249.if !target(load)
250load:	${PROG}
251	${KMODLOAD} -v ./${KMOD}.ko
252.endif
253
254.if !target(unload)
255unload:
256	${KMODUNLOAD} -v ${KMOD}
257.endif
258
259.for _src in ${SRCS:Mopt_*.h}
260CLEANFILES+=	${_src}
261.if !target(${_src})
262${_src}:
263	touch ${.TARGET}
264.endif
265.endfor
266
267MFILES?= kern/bus_if.m kern/device_if.m dev/iicbus/iicbb_if.m \
268    dev/iicbus/iicbus_if.m isa/isa_if.m \
269    libkern/iconv_converter_if.m \
270    dev/mii/miibus_if.m \
271    dev/pccard/card_if.m dev/pccard/power_if.m dev/pci/pci_if.m \
272    dev/pci/pcib_if.m dev/ppbus/ppbus_if.m dev/smbus/smbus_if.m \
273    dev/usb/usb_if.m dev/sound/pcm/ac97_if.m dev/sound/pcm/channel_if.m \
274    dev/sound/pcm/feeder_if.m dev/sound/pcm/mixer_if.m pci/agp_if.m
275
276.for _srcsrc in ${MFILES}
277.for _ext in c h
278.for _src in ${SRCS:M${_srcsrc:T:R}.${_ext}}
279CLEANFILES+=	${_src}
280.if !target(${_src})
281.if !exists(@)
282${_src}: @
283.endif
284.if exists(@)
285${_src}: @/kern/makeobjops.pl @/${_srcsrc}
286.endif
287	perl @/kern/makeobjops.pl -${_ext} @/${_srcsrc}
288.endif
289.endfor # _src
290.endfor # _ext
291.endfor # _srcsrc
292
293.for _ext in c h
294.if ${SRCS:Mvnode_if.${_ext}} != ""
295CLEANFILES+=	vnode_if.${_ext}
296.if !exists(@)
297vnode_if.${_ext}: @
298.endif
299.if exists(@)
300vnode_if.${_ext}: @/kern/vnode_if.pl @/kern/vnode_if.src
301.endif
302	perl @/kern/vnode_if.pl -${_ext} @/kern/vnode_if.src
303.endif
304.endfor
305
306regress:
307
308.include <bsd.dep.mk>
309
310.if !exists(${DEPENDFILE})
311${OBJS}: ${SRCS:M*.h}
312.endif
313
314.include <bsd.obj.mk>
315
316.include <bsd.kern.mk>
317