cam_periph.c revision 367145
1/*- 2 * Common functions for CAM "type" (peripheral) drivers. 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification, immediately at the beginning of the file. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30#include <sys/cdefs.h> 31__FBSDID("$FreeBSD: stable/11/sys/cam/cam_periph.c 367145 2020-10-29 22:00:15Z brooks $"); 32 33#include <sys/param.h> 34#include <sys/systm.h> 35#include <sys/types.h> 36#include <sys/malloc.h> 37#include <sys/kernel.h> 38#include <sys/bio.h> 39#include <sys/lock.h> 40#include <sys/mutex.h> 41#include <sys/buf.h> 42#include <sys/proc.h> 43#include <sys/devicestat.h> 44#include <sys/bus.h> 45#include <sys/sbuf.h> 46#include <sys/sysctl.h> 47#include <vm/vm.h> 48#include <vm/vm_extern.h> 49 50#include <cam/cam.h> 51#include <cam/cam_ccb.h> 52#include <cam/cam_queue.h> 53#include <cam/cam_xpt_periph.h> 54#include <cam/cam_periph.h> 55#include <cam/cam_debug.h> 56#include <cam/cam_sim.h> 57 58#include <cam/scsi/scsi_all.h> 59#include <cam/scsi/scsi_message.h> 60#include <cam/scsi/scsi_pass.h> 61 62static u_int camperiphnextunit(struct periph_driver *p_drv, 63 u_int newunit, int wired, 64 path_id_t pathid, target_id_t target, 65 lun_id_t lun); 66static u_int camperiphunit(struct periph_driver *p_drv, 67 path_id_t pathid, target_id_t target, 68 lun_id_t lun); 69static void camperiphdone(struct cam_periph *periph, 70 union ccb *done_ccb); 71static void camperiphfree(struct cam_periph *periph); 72static int camperiphscsistatuserror(union ccb *ccb, 73 union ccb **orig_ccb, 74 cam_flags camflags, 75 u_int32_t sense_flags, 76 int *openings, 77 u_int32_t *relsim_flags, 78 u_int32_t *timeout, 79 u_int32_t *action, 80 const char **action_string); 81static int camperiphscsisenseerror(union ccb *ccb, 82 union ccb **orig_ccb, 83 cam_flags camflags, 84 u_int32_t sense_flags, 85 int *openings, 86 u_int32_t *relsim_flags, 87 u_int32_t *timeout, 88 u_int32_t *action, 89 const char **action_string); 90static void cam_periph_devctl_notify(union ccb *ccb); 91 92static int nperiph_drivers; 93static int initialized = 0; 94struct periph_driver **periph_drivers; 95 96static MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers"); 97 98static int periph_selto_delay = 1000; 99TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay); 100static int periph_noresrc_delay = 500; 101TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay); 102static int periph_busy_delay = 500; 103TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay); 104 105static u_int periph_mapmem_thresh = 65536; 106SYSCTL_UINT(_kern_cam, OID_AUTO, mapmem_thresh, CTLFLAG_RWTUN, 107 &periph_mapmem_thresh, 0, "Threshold for user-space buffer mapping"); 108 109void 110periphdriver_register(void *data) 111{ 112 struct periph_driver *drv = (struct periph_driver *)data; 113 struct periph_driver **newdrivers, **old; 114 int ndrivers; 115 116again: 117 ndrivers = nperiph_drivers + 2; 118 newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH, 119 M_WAITOK); 120 xpt_lock_buses(); 121 if (ndrivers != nperiph_drivers + 2) { 122 /* 123 * Lost race against itself; go around. 124 */ 125 xpt_unlock_buses(); 126 free(newdrivers, M_CAMPERIPH); 127 goto again; 128 } 129 if (periph_drivers) 130 bcopy(periph_drivers, newdrivers, 131 sizeof(*newdrivers) * nperiph_drivers); 132 newdrivers[nperiph_drivers] = drv; 133 newdrivers[nperiph_drivers + 1] = NULL; 134 old = periph_drivers; 135 periph_drivers = newdrivers; 136 nperiph_drivers++; 137 xpt_unlock_buses(); 138 if (old) 139 free(old, M_CAMPERIPH); 140 /* If driver marked as early or it is late now, initialize it. */ 141 if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) || 142 initialized > 1) 143 (*drv->init)(); 144} 145 146int 147periphdriver_unregister(void *data) 148{ 149 struct periph_driver *drv = (struct periph_driver *)data; 150 int error, n; 151 152 /* If driver marked as early or it is late now, deinitialize it. */ 153 if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) || 154 initialized > 1) { 155 if (drv->deinit == NULL) { 156 printf("CAM periph driver '%s' doesn't have deinit.\n", 157 drv->driver_name); 158 return (EOPNOTSUPP); 159 } 160 error = drv->deinit(); 161 if (error != 0) 162 return (error); 163 } 164 165 xpt_lock_buses(); 166 for (n = 0; n < nperiph_drivers && periph_drivers[n] != drv; n++) 167 ; 168 KASSERT(n < nperiph_drivers, 169 ("Periph driver '%s' was not registered", drv->driver_name)); 170 for (; n + 1 < nperiph_drivers; n++) 171 periph_drivers[n] = periph_drivers[n + 1]; 172 periph_drivers[n + 1] = NULL; 173 nperiph_drivers--; 174 xpt_unlock_buses(); 175 return (0); 176} 177 178void 179periphdriver_init(int level) 180{ 181 int i, early; 182 183 initialized = max(initialized, level); 184 for (i = 0; periph_drivers[i] != NULL; i++) { 185 early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2; 186 if (early == initialized) 187 (*periph_drivers[i]->init)(); 188 } 189} 190 191cam_status 192cam_periph_alloc(periph_ctor_t *periph_ctor, 193 periph_oninv_t *periph_oninvalidate, 194 periph_dtor_t *periph_dtor, periph_start_t *periph_start, 195 char *name, cam_periph_type type, struct cam_path *path, 196 ac_callback_t *ac_callback, ac_code code, void *arg) 197{ 198 struct periph_driver **p_drv; 199 struct cam_sim *sim; 200 struct cam_periph *periph; 201 struct cam_periph *cur_periph; 202 path_id_t path_id; 203 target_id_t target_id; 204 lun_id_t lun_id; 205 cam_status status; 206 u_int init_level; 207 208 init_level = 0; 209 /* 210 * Handle Hot-Plug scenarios. If there is already a peripheral 211 * of our type assigned to this path, we are likely waiting for 212 * final close on an old, invalidated, peripheral. If this is 213 * the case, queue up a deferred call to the peripheral's async 214 * handler. If it looks like a mistaken re-allocation, complain. 215 */ 216 if ((periph = cam_periph_find(path, name)) != NULL) { 217 218 if ((periph->flags & CAM_PERIPH_INVALID) != 0 219 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) { 220 periph->flags |= CAM_PERIPH_NEW_DEV_FOUND; 221 periph->deferred_callback = ac_callback; 222 periph->deferred_ac = code; 223 return (CAM_REQ_INPROG); 224 } else { 225 printf("cam_periph_alloc: attempt to re-allocate " 226 "valid device %s%d rejected flags %#x " 227 "refcount %d\n", periph->periph_name, 228 periph->unit_number, periph->flags, 229 periph->refcount); 230 } 231 return (CAM_REQ_INVALID); 232 } 233 234 periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH, 235 M_NOWAIT|M_ZERO); 236 237 if (periph == NULL) 238 return (CAM_RESRC_UNAVAIL); 239 240 init_level++; 241 242 243 sim = xpt_path_sim(path); 244 path_id = xpt_path_path_id(path); 245 target_id = xpt_path_target_id(path); 246 lun_id = xpt_path_lun_id(path); 247 periph->periph_start = periph_start; 248 periph->periph_dtor = periph_dtor; 249 periph->periph_oninval = periph_oninvalidate; 250 periph->type = type; 251 periph->periph_name = name; 252 periph->scheduled_priority = CAM_PRIORITY_NONE; 253 periph->immediate_priority = CAM_PRIORITY_NONE; 254 periph->refcount = 1; /* Dropped by invalidation. */ 255 periph->sim = sim; 256 SLIST_INIT(&periph->ccb_list); 257 status = xpt_create_path(&path, periph, path_id, target_id, lun_id); 258 if (status != CAM_REQ_CMP) 259 goto failure; 260 periph->path = path; 261 262 xpt_lock_buses(); 263 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 264 if (strcmp((*p_drv)->driver_name, name) == 0) 265 break; 266 } 267 if (*p_drv == NULL) { 268 printf("cam_periph_alloc: invalid periph name '%s'\n", name); 269 xpt_unlock_buses(); 270 xpt_free_path(periph->path); 271 free(periph, M_CAMPERIPH); 272 return (CAM_REQ_INVALID); 273 } 274 periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id); 275 cur_periph = TAILQ_FIRST(&(*p_drv)->units); 276 while (cur_periph != NULL 277 && cur_periph->unit_number < periph->unit_number) 278 cur_periph = TAILQ_NEXT(cur_periph, unit_links); 279 if (cur_periph != NULL) { 280 KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list")); 281 TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links); 282 } else { 283 TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links); 284 (*p_drv)->generation++; 285 } 286 xpt_unlock_buses(); 287 288 init_level++; 289 290 status = xpt_add_periph(periph); 291 if (status != CAM_REQ_CMP) 292 goto failure; 293 294 init_level++; 295 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph created\n")); 296 297 status = periph_ctor(periph, arg); 298 299 if (status == CAM_REQ_CMP) 300 init_level++; 301 302failure: 303 switch (init_level) { 304 case 4: 305 /* Initialized successfully */ 306 break; 307 case 3: 308 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); 309 xpt_remove_periph(periph); 310 /* FALLTHROUGH */ 311 case 2: 312 xpt_lock_buses(); 313 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); 314 xpt_unlock_buses(); 315 xpt_free_path(periph->path); 316 /* FALLTHROUGH */ 317 case 1: 318 free(periph, M_CAMPERIPH); 319 /* FALLTHROUGH */ 320 case 0: 321 /* No cleanup to perform. */ 322 break; 323 default: 324 panic("%s: Unknown init level", __func__); 325 } 326 return(status); 327} 328 329/* 330 * Find a peripheral structure with the specified path, target, lun, 331 * and (optionally) type. If the name is NULL, this function will return 332 * the first peripheral driver that matches the specified path. 333 */ 334struct cam_periph * 335cam_periph_find(struct cam_path *path, char *name) 336{ 337 struct periph_driver **p_drv; 338 struct cam_periph *periph; 339 340 xpt_lock_buses(); 341 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 342 343 if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0)) 344 continue; 345 346 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { 347 if (xpt_path_comp(periph->path, path) == 0) { 348 xpt_unlock_buses(); 349 cam_periph_assert(periph, MA_OWNED); 350 return(periph); 351 } 352 } 353 if (name != NULL) { 354 xpt_unlock_buses(); 355 return(NULL); 356 } 357 } 358 xpt_unlock_buses(); 359 return(NULL); 360} 361 362/* 363 * Find peripheral driver instances attached to the specified path. 364 */ 365int 366cam_periph_list(struct cam_path *path, struct sbuf *sb) 367{ 368 struct sbuf local_sb; 369 struct periph_driver **p_drv; 370 struct cam_periph *periph; 371 int count; 372 int sbuf_alloc_len; 373 374 sbuf_alloc_len = 16; 375retry: 376 sbuf_new(&local_sb, NULL, sbuf_alloc_len, SBUF_FIXEDLEN); 377 count = 0; 378 xpt_lock_buses(); 379 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 380 381 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) { 382 if (xpt_path_comp(periph->path, path) != 0) 383 continue; 384 385 if (sbuf_len(&local_sb) != 0) 386 sbuf_cat(&local_sb, ","); 387 388 sbuf_printf(&local_sb, "%s%d", periph->periph_name, 389 periph->unit_number); 390 391 if (sbuf_error(&local_sb) == ENOMEM) { 392 sbuf_alloc_len *= 2; 393 xpt_unlock_buses(); 394 sbuf_delete(&local_sb); 395 goto retry; 396 } 397 count++; 398 } 399 } 400 xpt_unlock_buses(); 401 sbuf_finish(&local_sb); 402 if (sbuf_len(sb) != 0) 403 sbuf_cat(sb, ","); 404 sbuf_cat(sb, sbuf_data(&local_sb)); 405 sbuf_delete(&local_sb); 406 return (count); 407} 408 409cam_status 410cam_periph_acquire(struct cam_periph *periph) 411{ 412 cam_status status; 413 414 status = CAM_REQ_CMP_ERR; 415 if (periph == NULL) 416 return (status); 417 418 xpt_lock_buses(); 419 if ((periph->flags & CAM_PERIPH_INVALID) == 0) { 420 periph->refcount++; 421 status = CAM_REQ_CMP; 422 } 423 xpt_unlock_buses(); 424 425 return (status); 426} 427 428void 429cam_periph_doacquire(struct cam_periph *periph) 430{ 431 432 xpt_lock_buses(); 433 KASSERT(periph->refcount >= 1, 434 ("cam_periph_doacquire() with refcount == %d", periph->refcount)); 435 periph->refcount++; 436 xpt_unlock_buses(); 437} 438 439void 440cam_periph_release_locked_buses(struct cam_periph *periph) 441{ 442 443 cam_periph_assert(periph, MA_OWNED); 444 KASSERT(periph->refcount >= 1, ("periph->refcount >= 1")); 445 if (--periph->refcount == 0) 446 camperiphfree(periph); 447} 448 449void 450cam_periph_release_locked(struct cam_periph *periph) 451{ 452 453 if (periph == NULL) 454 return; 455 456 xpt_lock_buses(); 457 cam_periph_release_locked_buses(periph); 458 xpt_unlock_buses(); 459} 460 461void 462cam_periph_release(struct cam_periph *periph) 463{ 464 struct mtx *mtx; 465 466 if (periph == NULL) 467 return; 468 469 cam_periph_assert(periph, MA_NOTOWNED); 470 mtx = cam_periph_mtx(periph); 471 mtx_lock(mtx); 472 cam_periph_release_locked(periph); 473 mtx_unlock(mtx); 474} 475 476int 477cam_periph_hold(struct cam_periph *periph, int priority) 478{ 479 int error; 480 481 /* 482 * Increment the reference count on the peripheral 483 * while we wait for our lock attempt to succeed 484 * to ensure the peripheral doesn't disappear out 485 * from user us while we sleep. 486 */ 487 488 if (cam_periph_acquire(periph) != CAM_REQ_CMP) 489 return (ENXIO); 490 491 cam_periph_assert(periph, MA_OWNED); 492 while ((periph->flags & CAM_PERIPH_LOCKED) != 0) { 493 periph->flags |= CAM_PERIPH_LOCK_WANTED; 494 if ((error = cam_periph_sleep(periph, periph, priority, 495 "caplck", 0)) != 0) { 496 cam_periph_release_locked(periph); 497 return (error); 498 } 499 if (periph->flags & CAM_PERIPH_INVALID) { 500 cam_periph_release_locked(periph); 501 return (ENXIO); 502 } 503 } 504 505 periph->flags |= CAM_PERIPH_LOCKED; 506 return (0); 507} 508 509void 510cam_periph_unhold(struct cam_periph *periph) 511{ 512 513 cam_periph_assert(periph, MA_OWNED); 514 515 periph->flags &= ~CAM_PERIPH_LOCKED; 516 if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) { 517 periph->flags &= ~CAM_PERIPH_LOCK_WANTED; 518 wakeup(periph); 519 } 520 521 cam_periph_release_locked(periph); 522} 523 524/* 525 * Look for the next unit number that is not currently in use for this 526 * peripheral type starting at "newunit". Also exclude unit numbers that 527 * are reserved by for future "hardwiring" unless we already know that this 528 * is a potential wired device. Only assume that the device is "wired" the 529 * first time through the loop since after that we'll be looking at unit 530 * numbers that did not match a wiring entry. 531 */ 532static u_int 533camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired, 534 path_id_t pathid, target_id_t target, lun_id_t lun) 535{ 536 struct cam_periph *periph; 537 char *periph_name; 538 int i, val, dunit, r; 539 const char *dname, *strval; 540 541 periph_name = p_drv->driver_name; 542 for (;;newunit++) { 543 544 for (periph = TAILQ_FIRST(&p_drv->units); 545 periph != NULL && periph->unit_number != newunit; 546 periph = TAILQ_NEXT(periph, unit_links)) 547 ; 548 549 if (periph != NULL && periph->unit_number == newunit) { 550 if (wired != 0) { 551 xpt_print(periph->path, "Duplicate Wired " 552 "Device entry!\n"); 553 xpt_print(periph->path, "Second device (%s " 554 "device at scbus%d target %d lun %d) will " 555 "not be wired\n", periph_name, pathid, 556 target, lun); 557 wired = 0; 558 } 559 continue; 560 } 561 if (wired) 562 break; 563 564 /* 565 * Don't match entries like "da 4" as a wired down 566 * device, but do match entries like "da 4 target 5" 567 * or even "da 4 scbus 1". 568 */ 569 i = 0; 570 dname = periph_name; 571 for (;;) { 572 r = resource_find_dev(&i, dname, &dunit, NULL, NULL); 573 if (r != 0) 574 break; 575 /* if no "target" and no specific scbus, skip */ 576 if (resource_int_value(dname, dunit, "target", &val) && 577 (resource_string_value(dname, dunit, "at",&strval)|| 578 strcmp(strval, "scbus") == 0)) 579 continue; 580 if (newunit == dunit) 581 break; 582 } 583 if (r != 0) 584 break; 585 } 586 return (newunit); 587} 588 589static u_int 590camperiphunit(struct periph_driver *p_drv, path_id_t pathid, 591 target_id_t target, lun_id_t lun) 592{ 593 u_int unit; 594 int wired, i, val, dunit; 595 const char *dname, *strval; 596 char pathbuf[32], *periph_name; 597 598 periph_name = p_drv->driver_name; 599 snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid); 600 unit = 0; 601 i = 0; 602 dname = periph_name; 603 for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0; 604 wired = 0) { 605 if (resource_string_value(dname, dunit, "at", &strval) == 0) { 606 if (strcmp(strval, pathbuf) != 0) 607 continue; 608 wired++; 609 } 610 if (resource_int_value(dname, dunit, "target", &val) == 0) { 611 if (val != target) 612 continue; 613 wired++; 614 } 615 if (resource_int_value(dname, dunit, "lun", &val) == 0) { 616 if (val != lun) 617 continue; 618 wired++; 619 } 620 if (wired != 0) { 621 unit = dunit; 622 break; 623 } 624 } 625 626 /* 627 * Either start from 0 looking for the next unit or from 628 * the unit number given in the resource config. This way, 629 * if we have wildcard matches, we don't return the same 630 * unit number twice. 631 */ 632 unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun); 633 634 return (unit); 635} 636 637void 638cam_periph_invalidate(struct cam_periph *periph) 639{ 640 641 cam_periph_assert(periph, MA_OWNED); 642 /* 643 * We only call this routine the first time a peripheral is 644 * invalidated. 645 */ 646 if ((periph->flags & CAM_PERIPH_INVALID) != 0) 647 return; 648 649 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph invalidated\n")); 650 if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) 651 xpt_denounce_periph(periph); 652 periph->flags |= CAM_PERIPH_INVALID; 653 periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND; 654 if (periph->periph_oninval != NULL) 655 periph->periph_oninval(periph); 656 cam_periph_release_locked(periph); 657} 658 659static void 660camperiphfree(struct cam_periph *periph) 661{ 662 struct periph_driver **p_drv; 663 struct periph_driver *drv; 664 665 cam_periph_assert(periph, MA_OWNED); 666 KASSERT(periph->periph_allocating == 0, ("%s%d: freed while allocating", 667 periph->periph_name, periph->unit_number)); 668 for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) { 669 if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0) 670 break; 671 } 672 if (*p_drv == NULL) { 673 printf("camperiphfree: attempt to free non-existant periph\n"); 674 return; 675 } 676 /* 677 * Cache a pointer to the periph_driver structure. If a 678 * periph_driver is added or removed from the array (see 679 * periphdriver_register()) while we drop the toplogy lock 680 * below, p_drv may change. This doesn't protect against this 681 * particular periph_driver going away. That will require full 682 * reference counting in the periph_driver infrastructure. 683 */ 684 drv = *p_drv; 685 686 /* 687 * We need to set this flag before dropping the topology lock, to 688 * let anyone who is traversing the list that this peripheral is 689 * about to be freed, and there will be no more reference count 690 * checks. 691 */ 692 periph->flags |= CAM_PERIPH_FREE; 693 694 /* 695 * The peripheral destructor semantics dictate calling with only the 696 * SIM mutex held. Since it might sleep, it should not be called 697 * with the topology lock held. 698 */ 699 xpt_unlock_buses(); 700 701 /* 702 * We need to call the peripheral destructor prior to removing the 703 * peripheral from the list. Otherwise, we risk running into a 704 * scenario where the peripheral unit number may get reused 705 * (because it has been removed from the list), but some resources 706 * used by the peripheral are still hanging around. In particular, 707 * the devfs nodes used by some peripherals like the pass(4) driver 708 * aren't fully cleaned up until the destructor is run. If the 709 * unit number is reused before the devfs instance is fully gone, 710 * devfs will panic. 711 */ 712 if (periph->periph_dtor != NULL) 713 periph->periph_dtor(periph); 714 715 /* 716 * The peripheral list is protected by the topology lock. 717 */ 718 xpt_lock_buses(); 719 720 TAILQ_REMOVE(&drv->units, periph, unit_links); 721 drv->generation++; 722 723 xpt_remove_periph(periph); 724 725 xpt_unlock_buses(); 726 if ((periph->flags & CAM_PERIPH_ANNOUNCED) && !rebooting) 727 xpt_print(periph->path, "Periph destroyed\n"); 728 else 729 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("Periph destroyed\n")); 730 731 if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) { 732 union ccb ccb; 733 void *arg; 734 735 switch (periph->deferred_ac) { 736 case AC_FOUND_DEVICE: 737 ccb.ccb_h.func_code = XPT_GDEV_TYPE; 738 xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); 739 xpt_action(&ccb); 740 arg = &ccb; 741 break; 742 case AC_PATH_REGISTERED: 743 xpt_path_inq(&ccb.cpi, periph->path); 744 arg = &ccb; 745 break; 746 default: 747 arg = NULL; 748 break; 749 } 750 periph->deferred_callback(NULL, periph->deferred_ac, 751 periph->path, arg); 752 } 753 xpt_free_path(periph->path); 754 free(periph, M_CAMPERIPH); 755 xpt_lock_buses(); 756} 757 758/* 759 * Map user virtual pointers into kernel virtual address space, so we can 760 * access the memory. This is now a generic function that centralizes most 761 * of the sanity checks on the data flags, if any. 762 * This also only works for up to MAXPHYS memory. Since we use 763 * buffers to map stuff in and out, we're limited to the buffer size. 764 */ 765int 766cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo, 767 u_int maxmap) 768{ 769 int numbufs, i; 770 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; 771 u_int32_t lengths[CAM_PERIPH_MAXMAPS]; 772 u_int32_t dirs[CAM_PERIPH_MAXMAPS]; 773 bool misaligned[CAM_PERIPH_MAXMAPS]; 774 775 bzero(mapinfo, sizeof(*mapinfo)); 776 if (maxmap == 0) 777 maxmap = DFLTPHYS; /* traditional default */ 778 else if (maxmap > MAXPHYS) 779 maxmap = MAXPHYS; /* for safety */ 780 switch(ccb->ccb_h.func_code) { 781 case XPT_DEV_MATCH: 782 if (ccb->cdm.match_buf_len == 0) { 783 printf("cam_periph_mapmem: invalid match buffer " 784 "length 0\n"); 785 return(EINVAL); 786 } 787 if (ccb->cdm.pattern_buf_len > 0) { 788 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; 789 lengths[0] = ccb->cdm.pattern_buf_len; 790 dirs[0] = CAM_DIR_OUT; 791 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; 792 lengths[1] = ccb->cdm.match_buf_len; 793 dirs[1] = CAM_DIR_IN; 794 numbufs = 2; 795 } else { 796 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; 797 lengths[0] = ccb->cdm.match_buf_len; 798 dirs[0] = CAM_DIR_IN; 799 numbufs = 1; 800 } 801 /* 802 * This request will not go to the hardware, no reason 803 * to be so strict. vmapbuf() is able to map up to MAXPHYS. 804 */ 805 maxmap = MAXPHYS; 806 break; 807 case XPT_SCSI_IO: 808 case XPT_CONT_TARGET_IO: 809 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) 810 return(0); 811 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) 812 return (EINVAL); 813 data_ptrs[0] = &ccb->csio.data_ptr; 814 lengths[0] = ccb->csio.dxfer_len; 815 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 816 numbufs = 1; 817 break; 818 case XPT_ATA_IO: 819 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) 820 return(0); 821 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) 822 return (EINVAL); 823 data_ptrs[0] = &ccb->ataio.data_ptr; 824 lengths[0] = ccb->ataio.dxfer_len; 825 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 826 numbufs = 1; 827 break; 828 case XPT_SMP_IO: 829 data_ptrs[0] = &ccb->smpio.smp_request; 830 lengths[0] = ccb->smpio.smp_request_len; 831 dirs[0] = CAM_DIR_OUT; 832 data_ptrs[1] = &ccb->smpio.smp_response; 833 lengths[1] = ccb->smpio.smp_response_len; 834 dirs[1] = CAM_DIR_IN; 835 numbufs = 2; 836 break; 837 case XPT_NVME_IO: 838 case XPT_NVME_ADMIN: 839 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) 840 return (0); 841 if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) 842 return (EINVAL); 843 data_ptrs[0] = &ccb->nvmeio.data_ptr; 844 lengths[0] = ccb->nvmeio.dxfer_len; 845 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 846 numbufs = 1; 847 break; 848 case XPT_DEV_ADVINFO: 849 if (ccb->cdai.bufsiz == 0) 850 return (0); 851 852 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; 853 lengths[0] = ccb->cdai.bufsiz; 854 dirs[0] = CAM_DIR_IN; 855 numbufs = 1; 856 857 /* 858 * This request will not go to the hardware, no reason 859 * to be so strict. vmapbuf() is able to map up to MAXPHYS. 860 */ 861 maxmap = MAXPHYS; 862 break; 863 default: 864 return(EINVAL); 865 break; /* NOTREACHED */ 866 } 867 868 /* 869 * Check the transfer length and permissions first, so we don't 870 * have to unmap any previously mapped buffers. 871 */ 872 for (i = 0; i < numbufs; i++) { 873 if (lengths[i] > maxmap) { 874 printf("cam_periph_mapmem: attempt to map %lu bytes, " 875 "which is greater than %lu\n", 876 (long)(lengths[i]), (u_long)maxmap); 877 return (E2BIG); 878 } 879 880 /* 881 * The userland data pointer passed in may not be page 882 * aligned. vmapbuf() truncates the address to a page 883 * boundary, so if the address isn't page aligned, we'll 884 * need enough space for the given transfer length, plus 885 * whatever extra space is necessary to make it to the page 886 * boundary. 887 */ 888 misaligned[i] = (lengths[i] + 889 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK) > MAXPHYS); 890 } 891 892 /* 893 * This keeps the kernel stack of current thread from getting 894 * swapped. In low-memory situations where the kernel stack might 895 * otherwise get swapped out, this holds it and allows the thread 896 * to make progress and release the kernel mapped pages sooner. 897 * 898 * XXX KDM should I use P_NOSWAP instead? 899 */ 900 PHOLD(curproc); 901 902 for (i = 0; i < numbufs; i++) { 903 904 /* Save the user's data address. */ 905 mapinfo->orig[i] = *data_ptrs[i]; 906 907 /* 908 * For small buffers use malloc+copyin/copyout instead of 909 * mapping to KVA to avoid expensive TLB shootdowns. For 910 * small allocations malloc is backed by UMA, and so much 911 * cheaper on SMP systems. 912 */ 913 if (lengths[i] <= periph_mapmem_thresh || misaligned[i]) { 914 *data_ptrs[i] = malloc(lengths[i], M_CAMPERIPH, 915 M_WAITOK); 916 if (dirs[i] != CAM_DIR_IN) { 917 if (copyin(mapinfo->orig[i], *data_ptrs[i], 918 lengths[i]) != 0) { 919 free(*data_ptrs[i], M_CAMPERIPH); 920 *data_ptrs[i] = mapinfo->orig[i]; 921 goto fail; 922 } 923 } else 924 bzero(*data_ptrs[i], lengths[i]); 925 continue; 926 } 927 928 /* 929 * Get the buffer. 930 */ 931 mapinfo->bp[i] = getpbuf(NULL); 932 933 /* set the direction */ 934 mapinfo->bp[i]->b_iocmd = (dirs[i] == CAM_DIR_OUT) ? 935 BIO_WRITE : BIO_READ; 936 937 /* 938 * Map the buffer into kernel memory. 939 * 940 * Note that useracc() alone is not a sufficient test. 941 * vmapbuf() can still fail due to a smaller file mapped 942 * into a larger area of VM, or if userland races against 943 * vmapbuf() after the useracc() check. 944 */ 945 if (vmapbuf(mapinfo->bp[i], *data_ptrs[i], lengths[i], 1) < 0) { 946 relpbuf(mapinfo->bp[i], NULL); 947 goto fail; 948 } 949 950 /* set our pointer to the new mapped area */ 951 *data_ptrs[i] = mapinfo->bp[i]->b_data; 952 } 953 954 /* 955 * Now that we've gotten this far, change ownership to the kernel 956 * of the buffers so that we don't run afoul of returning to user 957 * space with locks (on the buffer) held. 958 */ 959 for (i = 0; i < numbufs; i++) { 960 if (mapinfo->bp[i]) 961 BUF_KERNPROC(mapinfo->bp[i]); 962 } 963 964 mapinfo->num_bufs_used = numbufs; 965 return(0); 966 967fail: 968 for (i--; i >= 0; i--) { 969 if (mapinfo->bp[i]) { 970 vunmapbuf(mapinfo->bp[i]); 971 relpbuf(mapinfo->bp[i], NULL); 972 } else 973 free(*data_ptrs[i], M_CAMPERIPH); 974 *data_ptrs[i] = mapinfo->orig[i]; 975 } 976 PRELE(curproc); 977 return(EACCES); 978} 979 980/* 981 * Unmap memory segments mapped into kernel virtual address space by 982 * cam_periph_mapmem(). 983 */ 984void 985cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) 986{ 987 int numbufs, i; 988 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; 989 u_int32_t lengths[CAM_PERIPH_MAXMAPS]; 990 u_int32_t dirs[CAM_PERIPH_MAXMAPS]; 991 992 if (mapinfo->num_bufs_used <= 0) { 993 /* nothing to free and the process wasn't held. */ 994 return; 995 } 996 997 switch (ccb->ccb_h.func_code) { 998 case XPT_DEV_MATCH: 999 if (ccb->cdm.pattern_buf_len > 0) { 1000 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; 1001 lengths[0] = ccb->cdm.pattern_buf_len; 1002 dirs[0] = CAM_DIR_OUT; 1003 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; 1004 lengths[1] = ccb->cdm.match_buf_len; 1005 dirs[1] = CAM_DIR_IN; 1006 numbufs = 2; 1007 } else { 1008 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; 1009 lengths[0] = ccb->cdm.match_buf_len; 1010 dirs[0] = CAM_DIR_IN; 1011 numbufs = 1; 1012 } 1013 break; 1014 case XPT_SCSI_IO: 1015 case XPT_CONT_TARGET_IO: 1016 data_ptrs[0] = &ccb->csio.data_ptr; 1017 lengths[0] = ccb->csio.dxfer_len; 1018 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 1019 numbufs = 1; 1020 break; 1021 case XPT_ATA_IO: 1022 data_ptrs[0] = &ccb->ataio.data_ptr; 1023 lengths[0] = ccb->ataio.dxfer_len; 1024 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 1025 numbufs = 1; 1026 break; 1027 case XPT_SMP_IO: 1028 data_ptrs[0] = &ccb->smpio.smp_request; 1029 lengths[0] = ccb->smpio.smp_request_len; 1030 dirs[0] = CAM_DIR_OUT; 1031 data_ptrs[1] = &ccb->smpio.smp_response; 1032 lengths[1] = ccb->smpio.smp_response_len; 1033 dirs[1] = CAM_DIR_IN; 1034 numbufs = 2; 1035 break; 1036 case XPT_NVME_IO: 1037 case XPT_NVME_ADMIN: 1038 data_ptrs[0] = &ccb->nvmeio.data_ptr; 1039 lengths[0] = ccb->nvmeio.dxfer_len; 1040 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 1041 numbufs = 1; 1042 break; 1043 case XPT_DEV_ADVINFO: 1044 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf; 1045 lengths[0] = ccb->cdai.bufsiz; 1046 dirs[0] = CAM_DIR_IN; 1047 numbufs = 1; 1048 break; 1049 default: 1050 /* allow ourselves to be swapped once again */ 1051 PRELE(curproc); 1052 return; 1053 break; /* NOTREACHED */ 1054 } 1055 1056 for (i = 0; i < numbufs; i++) { 1057 if (mapinfo->bp[i]) { 1058 /* unmap the buffer */ 1059 vunmapbuf(mapinfo->bp[i]); 1060 1061 /* release the buffer */ 1062 relpbuf(mapinfo->bp[i], NULL); 1063 } else { 1064 if (dirs[i] != CAM_DIR_OUT) { 1065 copyout(*data_ptrs[i], mapinfo->orig[i], 1066 lengths[i]); 1067 } 1068 free(*data_ptrs[i], M_CAMPERIPH); 1069 } 1070 1071 /* Set the user's pointer back to the original value */ 1072 *data_ptrs[i] = mapinfo->orig[i]; 1073 } 1074 1075 /* allow ourselves to be swapped once again */ 1076 PRELE(curproc); 1077} 1078 1079int 1080cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr, 1081 int (*error_routine)(union ccb *ccb, 1082 cam_flags camflags, 1083 u_int32_t sense_flags)) 1084{ 1085 union ccb *ccb; 1086 int error; 1087 int found; 1088 1089 error = found = 0; 1090 1091 switch(cmd){ 1092 case CAMGETPASSTHRU: 1093 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); 1094 xpt_setup_ccb(&ccb->ccb_h, 1095 ccb->ccb_h.path, 1096 CAM_PRIORITY_NORMAL); 1097 ccb->ccb_h.func_code = XPT_GDEVLIST; 1098 1099 /* 1100 * Basically, the point of this is that we go through 1101 * getting the list of devices, until we find a passthrough 1102 * device. In the current version of the CAM code, the 1103 * only way to determine what type of device we're dealing 1104 * with is by its name. 1105 */ 1106 while (found == 0) { 1107 ccb->cgdl.index = 0; 1108 ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; 1109 while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { 1110 1111 /* we want the next device in the list */ 1112 xpt_action(ccb); 1113 if (strncmp(ccb->cgdl.periph_name, 1114 "pass", 4) == 0){ 1115 found = 1; 1116 break; 1117 } 1118 } 1119 if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) && 1120 (found == 0)) { 1121 ccb->cgdl.periph_name[0] = '\0'; 1122 ccb->cgdl.unit_number = 0; 1123 break; 1124 } 1125 } 1126 1127 /* copy the result back out */ 1128 bcopy(ccb, addr, sizeof(union ccb)); 1129 1130 /* and release the ccb */ 1131 xpt_release_ccb(ccb); 1132 1133 break; 1134 default: 1135 error = ENOTTY; 1136 break; 1137 } 1138 return(error); 1139} 1140 1141static void 1142cam_periph_done_panic(struct cam_periph *periph, union ccb *done_ccb) 1143{ 1144 1145 panic("%s: already done with ccb %p", __func__, done_ccb); 1146} 1147 1148static void 1149cam_periph_done(struct cam_periph *periph, union ccb *done_ccb) 1150{ 1151 1152 /* Caller will release the CCB */ 1153 xpt_path_assert(done_ccb->ccb_h.path, MA_OWNED); 1154 done_ccb->ccb_h.cbfcnp = cam_periph_done_panic; 1155 wakeup(&done_ccb->ccb_h.cbfcnp); 1156} 1157 1158static void 1159cam_periph_ccbwait(union ccb *ccb) 1160{ 1161 1162 if ((ccb->ccb_h.func_code & XPT_FC_QUEUED) != 0) { 1163 while (ccb->ccb_h.cbfcnp != cam_periph_done_panic) 1164 xpt_path_sleep(ccb->ccb_h.path, &ccb->ccb_h.cbfcnp, 1165 PRIBIO, "cbwait", 0); 1166 } 1167 KASSERT(ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX && 1168 (ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG, 1169 ("%s: proceeding with incomplete ccb: ccb=%p, func_code=%#x, " 1170 "status=%#x, index=%d", __func__, ccb, ccb->ccb_h.func_code, 1171 ccb->ccb_h.status, ccb->ccb_h.pinfo.index)); 1172} 1173 1174int 1175cam_periph_runccb(union ccb *ccb, 1176 int (*error_routine)(union ccb *ccb, 1177 cam_flags camflags, 1178 u_int32_t sense_flags), 1179 cam_flags camflags, u_int32_t sense_flags, 1180 struct devstat *ds) 1181{ 1182 struct bintime *starttime; 1183 struct bintime ltime; 1184 int error; 1185 1186 starttime = NULL; 1187 xpt_path_assert(ccb->ccb_h.path, MA_OWNED); 1188 KASSERT((ccb->ccb_h.flags & CAM_UNLOCKED) == 0, 1189 ("%s: ccb=%p, func_code=%#x, flags=%#x", __func__, ccb, 1190 ccb->ccb_h.func_code, ccb->ccb_h.flags)); 1191 1192 /* 1193 * If the user has supplied a stats structure, and if we understand 1194 * this particular type of ccb, record the transaction start. 1195 */ 1196 if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO || 1197 ccb->ccb_h.func_code == XPT_ATA_IO)) { 1198 starttime = <ime; 1199 binuptime(starttime); 1200 devstat_start_transaction(ds, starttime); 1201 } 1202 1203 ccb->ccb_h.cbfcnp = cam_periph_done; 1204 xpt_action(ccb); 1205 1206 do { 1207 cam_periph_ccbwait(ccb); 1208 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) 1209 error = 0; 1210 else if (error_routine != NULL) { 1211 ccb->ccb_h.cbfcnp = cam_periph_done; 1212 error = (*error_routine)(ccb, camflags, sense_flags); 1213 } else 1214 error = 0; 1215 1216 } while (error == ERESTART); 1217 1218 if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { 1219 cam_release_devq(ccb->ccb_h.path, 1220 /* relsim_flags */0, 1221 /* openings */0, 1222 /* timeout */0, 1223 /* getcount_only */ FALSE); 1224 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1225 } 1226 1227 if (ds != NULL) { 1228 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 1229 devstat_end_transaction(ds, 1230 ccb->csio.dxfer_len - ccb->csio.resid, 1231 ccb->csio.tag_action & 0x3, 1232 ((ccb->ccb_h.flags & CAM_DIR_MASK) == 1233 CAM_DIR_NONE) ? DEVSTAT_NO_DATA : 1234 (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1235 DEVSTAT_WRITE : 1236 DEVSTAT_READ, NULL, starttime); 1237 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1238 devstat_end_transaction(ds, 1239 ccb->ataio.dxfer_len - ccb->ataio.resid, 1240 0, /* Not used in ATA */ 1241 ((ccb->ccb_h.flags & CAM_DIR_MASK) == 1242 CAM_DIR_NONE) ? DEVSTAT_NO_DATA : 1243 (ccb->ccb_h.flags & CAM_DIR_OUT) ? 1244 DEVSTAT_WRITE : 1245 DEVSTAT_READ, NULL, starttime); 1246 } 1247 } 1248 1249 return(error); 1250} 1251 1252void 1253cam_freeze_devq(struct cam_path *path) 1254{ 1255 struct ccb_hdr ccb_h; 1256 1257 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_freeze_devq\n")); 1258 xpt_setup_ccb(&ccb_h, path, /*priority*/1); 1259 ccb_h.func_code = XPT_NOOP; 1260 ccb_h.flags = CAM_DEV_QFREEZE; 1261 xpt_action((union ccb *)&ccb_h); 1262} 1263 1264u_int32_t 1265cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, 1266 u_int32_t openings, u_int32_t arg, 1267 int getcount_only) 1268{ 1269 struct ccb_relsim crs; 1270 1271 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("cam_release_devq(%u, %u, %u, %d)\n", 1272 relsim_flags, openings, arg, getcount_only)); 1273 xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); 1274 crs.ccb_h.func_code = XPT_REL_SIMQ; 1275 crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0; 1276 crs.release_flags = relsim_flags; 1277 crs.openings = openings; 1278 crs.release_timeout = arg; 1279 xpt_action((union ccb *)&crs); 1280 return (crs.qfrozen_cnt); 1281} 1282 1283#define saved_ccb_ptr ppriv_ptr0 1284static void 1285camperiphdone(struct cam_periph *periph, union ccb *done_ccb) 1286{ 1287 union ccb *saved_ccb; 1288 cam_status status; 1289 struct scsi_start_stop_unit *scsi_cmd; 1290 int error = 0, error_code, sense_key, asc, ascq; 1291 1292 scsi_cmd = (struct scsi_start_stop_unit *) 1293 &done_ccb->csio.cdb_io.cdb_bytes; 1294 status = done_ccb->ccb_h.status; 1295 1296 if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) { 1297 if (scsi_extract_sense_ccb(done_ccb, 1298 &error_code, &sense_key, &asc, &ascq)) { 1299 /* 1300 * If the error is "invalid field in CDB", 1301 * and the load/eject flag is set, turn the 1302 * flag off and try again. This is just in 1303 * case the drive in question barfs on the 1304 * load eject flag. The CAM code should set 1305 * the load/eject flag by default for 1306 * removable media. 1307 */ 1308 if ((scsi_cmd->opcode == START_STOP_UNIT) && 1309 ((scsi_cmd->how & SSS_LOEJ) != 0) && 1310 (asc == 0x24) && (ascq == 0x00)) { 1311 scsi_cmd->how &= ~SSS_LOEJ; 1312 if (status & CAM_DEV_QFRZN) { 1313 cam_release_devq(done_ccb->ccb_h.path, 1314 0, 0, 0, 0); 1315 done_ccb->ccb_h.status &= 1316 ~CAM_DEV_QFRZN; 1317 } 1318 xpt_action(done_ccb); 1319 goto out; 1320 } 1321 } 1322 error = cam_periph_error(done_ccb, 0, 1323 SF_RETRY_UA | SF_NO_PRINT, NULL); 1324 if (error == ERESTART) 1325 goto out; 1326 if (done_ccb->ccb_h.status & CAM_DEV_QFRZN) { 1327 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); 1328 done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1329 } 1330 } else { 1331 /* 1332 * If we have successfully taken a device from the not 1333 * ready to ready state, re-scan the device and re-get 1334 * the inquiry information. Many devices (mostly disks) 1335 * don't properly report their inquiry information unless 1336 * they are spun up. 1337 */ 1338 if (scsi_cmd->opcode == START_STOP_UNIT) 1339 xpt_async(AC_INQ_CHANGED, done_ccb->ccb_h.path, NULL); 1340 } 1341 1342 /* If we tried long wait and still failed, remember that. */ 1343 if ((periph->flags & CAM_PERIPH_RECOVERY_WAIT) && 1344 (done_ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY)) { 1345 periph->flags &= ~CAM_PERIPH_RECOVERY_WAIT; 1346 if (error != 0 && done_ccb->ccb_h.retry_count == 0) 1347 periph->flags |= CAM_PERIPH_RECOVERY_WAIT_FAILED; 1348 } 1349 1350 /* 1351 * After recovery action(s) completed, return to the original CCB. 1352 * If the recovery CCB has failed, considering its own possible 1353 * retries and recovery, assume we are back in state where we have 1354 * been originally, but without recovery hopes left. In such case, 1355 * after the final attempt below, we cancel any further retries, 1356 * blocking by that also any new recovery attempts for this CCB, 1357 * and the result will be the final one returned to the CCB owher. 1358 */ 1359 saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr; 1360 bcopy(saved_ccb, done_ccb, sizeof(*done_ccb)); 1361 xpt_free_ccb(saved_ccb); 1362 if (done_ccb->ccb_h.cbfcnp != camperiphdone) 1363 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; 1364 if (error != 0) 1365 done_ccb->ccb_h.retry_count = 0; 1366 xpt_action(done_ccb); 1367 1368out: 1369 /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ 1370 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0); 1371} 1372 1373/* 1374 * Generic Async Event handler. Peripheral drivers usually 1375 * filter out the events that require personal attention, 1376 * and leave the rest to this function. 1377 */ 1378void 1379cam_periph_async(struct cam_periph *periph, u_int32_t code, 1380 struct cam_path *path, void *arg) 1381{ 1382 switch (code) { 1383 case AC_LOST_DEVICE: 1384 cam_periph_invalidate(periph); 1385 break; 1386 default: 1387 break; 1388 } 1389} 1390 1391void 1392cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle) 1393{ 1394 struct ccb_getdevstats cgds; 1395 1396 xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL); 1397 cgds.ccb_h.func_code = XPT_GDEV_STATS; 1398 xpt_action((union ccb *)&cgds); 1399 cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle); 1400} 1401 1402void 1403cam_periph_freeze_after_event(struct cam_periph *periph, 1404 struct timeval* event_time, u_int duration_ms) 1405{ 1406 struct timeval delta; 1407 struct timeval duration_tv; 1408 1409 if (!timevalisset(event_time)) 1410 return; 1411 1412 microtime(&delta); 1413 timevalsub(&delta, event_time); 1414 duration_tv.tv_sec = duration_ms / 1000; 1415 duration_tv.tv_usec = (duration_ms % 1000) * 1000; 1416 if (timevalcmp(&delta, &duration_tv, <)) { 1417 timevalsub(&duration_tv, &delta); 1418 1419 duration_ms = duration_tv.tv_sec * 1000; 1420 duration_ms += duration_tv.tv_usec / 1000; 1421 cam_freeze_devq(periph->path); 1422 cam_release_devq(periph->path, 1423 RELSIM_RELEASE_AFTER_TIMEOUT, 1424 /*reduction*/0, 1425 /*timeout*/duration_ms, 1426 /*getcount_only*/0); 1427 } 1428 1429} 1430 1431static int 1432camperiphscsistatuserror(union ccb *ccb, union ccb **orig_ccb, 1433 cam_flags camflags, u_int32_t sense_flags, 1434 int *openings, u_int32_t *relsim_flags, 1435 u_int32_t *timeout, u_int32_t *action, const char **action_string) 1436{ 1437 struct cam_periph *periph; 1438 int error; 1439 1440 switch (ccb->csio.scsi_status) { 1441 case SCSI_STATUS_OK: 1442 case SCSI_STATUS_COND_MET: 1443 case SCSI_STATUS_INTERMED: 1444 case SCSI_STATUS_INTERMED_COND_MET: 1445 error = 0; 1446 break; 1447 case SCSI_STATUS_CMD_TERMINATED: 1448 case SCSI_STATUS_CHECK_COND: 1449 error = camperiphscsisenseerror(ccb, orig_ccb, 1450 camflags, 1451 sense_flags, 1452 openings, 1453 relsim_flags, 1454 timeout, 1455 action, 1456 action_string); 1457 break; 1458 case SCSI_STATUS_QUEUE_FULL: 1459 { 1460 /* no decrement */ 1461 struct ccb_getdevstats cgds; 1462 1463 /* 1464 * First off, find out what the current 1465 * transaction counts are. 1466 */ 1467 xpt_setup_ccb(&cgds.ccb_h, 1468 ccb->ccb_h.path, 1469 CAM_PRIORITY_NORMAL); 1470 cgds.ccb_h.func_code = XPT_GDEV_STATS; 1471 xpt_action((union ccb *)&cgds); 1472 1473 /* 1474 * If we were the only transaction active, treat 1475 * the QUEUE FULL as if it were a BUSY condition. 1476 */ 1477 if (cgds.dev_active != 0) { 1478 int total_openings; 1479 1480 /* 1481 * Reduce the number of openings to 1482 * be 1 less than the amount it took 1483 * to get a queue full bounded by the 1484 * minimum allowed tag count for this 1485 * device. 1486 */ 1487 total_openings = cgds.dev_active + cgds.dev_openings; 1488 *openings = cgds.dev_active; 1489 if (*openings < cgds.mintags) 1490 *openings = cgds.mintags; 1491 if (*openings < total_openings) 1492 *relsim_flags = RELSIM_ADJUST_OPENINGS; 1493 else { 1494 /* 1495 * Some devices report queue full for 1496 * temporary resource shortages. For 1497 * this reason, we allow a minimum 1498 * tag count to be entered via a 1499 * quirk entry to prevent the queue 1500 * count on these devices from falling 1501 * to a pessimisticly low value. We 1502 * still wait for the next successful 1503 * completion, however, before queueing 1504 * more transactions to the device. 1505 */ 1506 *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT; 1507 } 1508 *timeout = 0; 1509 error = ERESTART; 1510 *action &= ~SSQ_PRINT_SENSE; 1511 break; 1512 } 1513 /* FALLTHROUGH */ 1514 } 1515 case SCSI_STATUS_BUSY: 1516 /* 1517 * Restart the queue after either another 1518 * command completes or a 1 second timeout. 1519 */ 1520 periph = xpt_path_periph(ccb->ccb_h.path); 1521 if (periph->flags & CAM_PERIPH_INVALID) { 1522 error = EIO; 1523 *action_string = "Periph was invalidated"; 1524 } else if ((sense_flags & SF_RETRY_BUSY) != 0 || 1525 ccb->ccb_h.retry_count > 0) { 1526 if ((sense_flags & SF_RETRY_BUSY) == 0) 1527 ccb->ccb_h.retry_count--; 1528 error = ERESTART; 1529 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT 1530 | RELSIM_RELEASE_AFTER_CMDCMPLT; 1531 *timeout = 1000; 1532 } else { 1533 error = EIO; 1534 *action_string = "Retries exhausted"; 1535 } 1536 break; 1537 case SCSI_STATUS_RESERV_CONFLICT: 1538 default: 1539 error = EIO; 1540 break; 1541 } 1542 return (error); 1543} 1544 1545static int 1546camperiphscsisenseerror(union ccb *ccb, union ccb **orig, 1547 cam_flags camflags, u_int32_t sense_flags, 1548 int *openings, u_int32_t *relsim_flags, 1549 u_int32_t *timeout, u_int32_t *action, const char **action_string) 1550{ 1551 struct cam_periph *periph; 1552 union ccb *orig_ccb = ccb; 1553 int error, recoveryccb; 1554 1555 periph = xpt_path_periph(ccb->ccb_h.path); 1556 recoveryccb = (ccb->ccb_h.cbfcnp == camperiphdone); 1557 if ((periph->flags & CAM_PERIPH_RECOVERY_INPROG) && !recoveryccb) { 1558 /* 1559 * If error recovery is already in progress, don't attempt 1560 * to process this error, but requeue it unconditionally 1561 * and attempt to process it once error recovery has 1562 * completed. This failed command is probably related to 1563 * the error that caused the currently active error recovery 1564 * action so our current recovery efforts should also 1565 * address this command. Be aware that the error recovery 1566 * code assumes that only one recovery action is in progress 1567 * on a particular peripheral instance at any given time 1568 * (e.g. only one saved CCB for error recovery) so it is 1569 * imperitive that we don't violate this assumption. 1570 */ 1571 error = ERESTART; 1572 *action &= ~SSQ_PRINT_SENSE; 1573 } else { 1574 scsi_sense_action err_action; 1575 struct ccb_getdev cgd; 1576 1577 /* 1578 * Grab the inquiry data for this device. 1579 */ 1580 xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL); 1581 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 1582 xpt_action((union ccb *)&cgd); 1583 1584 err_action = scsi_error_action(&ccb->csio, &cgd.inq_data, 1585 sense_flags); 1586 error = err_action & SS_ERRMASK; 1587 1588 /* 1589 * Do not autostart sequential access devices 1590 * to avoid unexpected tape loading. 1591 */ 1592 if ((err_action & SS_MASK) == SS_START && 1593 SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) { 1594 *action_string = "Will not autostart a " 1595 "sequential access device"; 1596 goto sense_error_done; 1597 } 1598 1599 /* 1600 * Avoid recovery recursion if recovery action is the same. 1601 */ 1602 if ((err_action & SS_MASK) >= SS_START && recoveryccb) { 1603 if (((err_action & SS_MASK) == SS_START && 1604 ccb->csio.cdb_io.cdb_bytes[0] == START_STOP_UNIT) || 1605 ((err_action & SS_MASK) == SS_TUR && 1606 (ccb->csio.cdb_io.cdb_bytes[0] == TEST_UNIT_READY))) { 1607 err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO; 1608 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1609 *timeout = 500; 1610 } 1611 } 1612 1613 /* 1614 * If the recovery action will consume a retry, 1615 * make sure we actually have retries available. 1616 */ 1617 if ((err_action & SSQ_DECREMENT_COUNT) != 0) { 1618 if (ccb->ccb_h.retry_count > 0 && 1619 (periph->flags & CAM_PERIPH_INVALID) == 0) 1620 ccb->ccb_h.retry_count--; 1621 else { 1622 *action_string = "Retries exhausted"; 1623 goto sense_error_done; 1624 } 1625 } 1626 1627 if ((err_action & SS_MASK) >= SS_START) { 1628 /* 1629 * Do common portions of commands that 1630 * use recovery CCBs. 1631 */ 1632 orig_ccb = xpt_alloc_ccb_nowait(); 1633 if (orig_ccb == NULL) { 1634 *action_string = "Can't allocate recovery CCB"; 1635 goto sense_error_done; 1636 } 1637 /* 1638 * Clear freeze flag for original request here, as 1639 * this freeze will be dropped as part of ERESTART. 1640 */ 1641 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1642 bcopy(ccb, orig_ccb, sizeof(*orig_ccb)); 1643 } 1644 1645 switch (err_action & SS_MASK) { 1646 case SS_NOP: 1647 *action_string = "No recovery action needed"; 1648 error = 0; 1649 break; 1650 case SS_RETRY: 1651 *action_string = "Retrying command (per sense data)"; 1652 error = ERESTART; 1653 break; 1654 case SS_FAIL: 1655 *action_string = "Unretryable error"; 1656 break; 1657 case SS_START: 1658 { 1659 int le; 1660 1661 /* 1662 * Send a start unit command to the device, and 1663 * then retry the command. 1664 */ 1665 *action_string = "Attempting to start unit"; 1666 periph->flags |= CAM_PERIPH_RECOVERY_INPROG; 1667 1668 /* 1669 * Check for removable media and set 1670 * load/eject flag appropriately. 1671 */ 1672 if (SID_IS_REMOVABLE(&cgd.inq_data)) 1673 le = TRUE; 1674 else 1675 le = FALSE; 1676 1677 scsi_start_stop(&ccb->csio, 1678 /*retries*/1, 1679 camperiphdone, 1680 MSG_SIMPLE_Q_TAG, 1681 /*start*/TRUE, 1682 /*load/eject*/le, 1683 /*immediate*/FALSE, 1684 SSD_FULL_SIZE, 1685 /*timeout*/50000); 1686 break; 1687 } 1688 case SS_TUR: 1689 { 1690 /* 1691 * Send a Test Unit Ready to the device. 1692 * If the 'many' flag is set, we send 120 1693 * test unit ready commands, one every half 1694 * second. Otherwise, we just send one TUR. 1695 * We only want to do this if the retry 1696 * count has not been exhausted. 1697 */ 1698 int retries; 1699 1700 if ((err_action & SSQ_MANY) != 0 && (periph->flags & 1701 CAM_PERIPH_RECOVERY_WAIT_FAILED) == 0) { 1702 periph->flags |= CAM_PERIPH_RECOVERY_WAIT; 1703 *action_string = "Polling device for readiness"; 1704 retries = 120; 1705 } else { 1706 *action_string = "Testing device for readiness"; 1707 retries = 1; 1708 } 1709 periph->flags |= CAM_PERIPH_RECOVERY_INPROG; 1710 scsi_test_unit_ready(&ccb->csio, 1711 retries, 1712 camperiphdone, 1713 MSG_SIMPLE_Q_TAG, 1714 SSD_FULL_SIZE, 1715 /*timeout*/5000); 1716 1717 /* 1718 * Accomplish our 500ms delay by deferring 1719 * the release of our device queue appropriately. 1720 */ 1721 *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1722 *timeout = 500; 1723 break; 1724 } 1725 default: 1726 panic("Unhandled error action %x", err_action); 1727 } 1728 1729 if ((err_action & SS_MASK) >= SS_START) { 1730 /* 1731 * Drop the priority, so that the recovery 1732 * CCB is the first to execute. Freeze the queue 1733 * after this command is sent so that we can 1734 * restore the old csio and have it queued in 1735 * the proper order before we release normal 1736 * transactions to the device. 1737 */ 1738 ccb->ccb_h.pinfo.priority--; 1739 ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 1740 ccb->ccb_h.saved_ccb_ptr = orig_ccb; 1741 error = ERESTART; 1742 *orig = orig_ccb; 1743 } 1744 1745sense_error_done: 1746 *action = err_action; 1747 } 1748 return (error); 1749} 1750 1751/* 1752 * Generic error handler. Peripheral drivers usually filter 1753 * out the errors that they handle in a unique manner, then 1754 * call this function. 1755 */ 1756int 1757cam_periph_error(union ccb *ccb, cam_flags camflags, 1758 u_int32_t sense_flags, union ccb *save_ccb) 1759{ 1760 struct cam_path *newpath; 1761 union ccb *orig_ccb, *scan_ccb; 1762 struct cam_periph *periph; 1763 const char *action_string; 1764 cam_status status; 1765 int frozen, error, openings, devctl_err; 1766 u_int32_t action, relsim_flags, timeout; 1767 1768 action = SSQ_PRINT_SENSE; 1769 periph = xpt_path_periph(ccb->ccb_h.path); 1770 action_string = NULL; 1771 status = ccb->ccb_h.status; 1772 frozen = (status & CAM_DEV_QFRZN) != 0; 1773 status &= CAM_STATUS_MASK; 1774 devctl_err = openings = relsim_flags = timeout = 0; 1775 orig_ccb = ccb; 1776 1777 /* Filter the errors that should be reported via devctl */ 1778 switch (ccb->ccb_h.status & CAM_STATUS_MASK) { 1779 case CAM_CMD_TIMEOUT: 1780 case CAM_REQ_ABORTED: 1781 case CAM_REQ_CMP_ERR: 1782 case CAM_REQ_TERMIO: 1783 case CAM_UNREC_HBA_ERROR: 1784 case CAM_DATA_RUN_ERR: 1785 case CAM_SCSI_STATUS_ERROR: 1786 case CAM_ATA_STATUS_ERROR: 1787 case CAM_SMP_STATUS_ERROR: 1788 devctl_err++; 1789 break; 1790 default: 1791 break; 1792 } 1793 1794 switch (status) { 1795 case CAM_REQ_CMP: 1796 error = 0; 1797 action &= ~SSQ_PRINT_SENSE; 1798 break; 1799 case CAM_SCSI_STATUS_ERROR: 1800 error = camperiphscsistatuserror(ccb, &orig_ccb, 1801 camflags, sense_flags, &openings, &relsim_flags, 1802 &timeout, &action, &action_string); 1803 break; 1804 case CAM_AUTOSENSE_FAIL: 1805 error = EIO; /* we have to kill the command */ 1806 break; 1807 case CAM_UA_ABORT: 1808 case CAM_UA_TERMIO: 1809 case CAM_MSG_REJECT_REC: 1810 /* XXX Don't know that these are correct */ 1811 error = EIO; 1812 break; 1813 case CAM_SEL_TIMEOUT: 1814 if ((camflags & CAM_RETRY_SELTO) != 0) { 1815 if (ccb->ccb_h.retry_count > 0 && 1816 (periph->flags & CAM_PERIPH_INVALID) == 0) { 1817 ccb->ccb_h.retry_count--; 1818 error = ERESTART; 1819 1820 /* 1821 * Wait a bit to give the device 1822 * time to recover before we try again. 1823 */ 1824 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1825 timeout = periph_selto_delay; 1826 break; 1827 } 1828 action_string = "Retries exhausted"; 1829 } 1830 /* FALLTHROUGH */ 1831 case CAM_DEV_NOT_THERE: 1832 error = ENXIO; 1833 action = SSQ_LOST; 1834 break; 1835 case CAM_REQ_INVALID: 1836 case CAM_PATH_INVALID: 1837 case CAM_NO_HBA: 1838 case CAM_PROVIDE_FAIL: 1839 case CAM_REQ_TOO_BIG: 1840 case CAM_LUN_INVALID: 1841 case CAM_TID_INVALID: 1842 case CAM_FUNC_NOTAVAIL: 1843 error = EINVAL; 1844 break; 1845 case CAM_SCSI_BUS_RESET: 1846 case CAM_BDR_SENT: 1847 /* 1848 * Commands that repeatedly timeout and cause these 1849 * kinds of error recovery actions, should return 1850 * CAM_CMD_TIMEOUT, which allows us to safely assume 1851 * that this command was an innocent bystander to 1852 * these events and should be unconditionally 1853 * retried. 1854 */ 1855 case CAM_REQUEUE_REQ: 1856 /* Unconditional requeue if device is still there */ 1857 if (periph->flags & CAM_PERIPH_INVALID) { 1858 action_string = "Periph was invalidated"; 1859 error = EIO; 1860 } else if (sense_flags & SF_NO_RETRY) { 1861 error = EIO; 1862 action_string = "Retry was blocked"; 1863 } else { 1864 error = ERESTART; 1865 action &= ~SSQ_PRINT_SENSE; 1866 } 1867 break; 1868 case CAM_RESRC_UNAVAIL: 1869 /* Wait a bit for the resource shortage to abate. */ 1870 timeout = periph_noresrc_delay; 1871 /* FALLTHROUGH */ 1872 case CAM_BUSY: 1873 if (timeout == 0) { 1874 /* Wait a bit for the busy condition to abate. */ 1875 timeout = periph_busy_delay; 1876 } 1877 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1878 /* FALLTHROUGH */ 1879 case CAM_ATA_STATUS_ERROR: 1880 case CAM_REQ_CMP_ERR: 1881 case CAM_CMD_TIMEOUT: 1882 case CAM_UNEXP_BUSFREE: 1883 case CAM_UNCOR_PARITY: 1884 case CAM_DATA_RUN_ERR: 1885 default: 1886 if (periph->flags & CAM_PERIPH_INVALID) { 1887 error = EIO; 1888 action_string = "Periph was invalidated"; 1889 } else if (ccb->ccb_h.retry_count == 0) { 1890 error = EIO; 1891 action_string = "Retries exhausted"; 1892 } else if (sense_flags & SF_NO_RETRY) { 1893 error = EIO; 1894 action_string = "Retry was blocked"; 1895 } else { 1896 ccb->ccb_h.retry_count--; 1897 error = ERESTART; 1898 } 1899 break; 1900 } 1901 1902 if ((sense_flags & SF_PRINT_ALWAYS) || 1903 CAM_DEBUGGED(ccb->ccb_h.path, CAM_DEBUG_INFO)) 1904 action |= SSQ_PRINT_SENSE; 1905 else if (sense_flags & SF_NO_PRINT) 1906 action &= ~SSQ_PRINT_SENSE; 1907 if ((action & SSQ_PRINT_SENSE) != 0) 1908 cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL); 1909 if (error != 0 && (action & SSQ_PRINT_SENSE) != 0) { 1910 if (error != ERESTART) { 1911 if (action_string == NULL) 1912 action_string = "Unretryable error"; 1913 xpt_print(ccb->ccb_h.path, "Error %d, %s\n", 1914 error, action_string); 1915 } else if (action_string != NULL) 1916 xpt_print(ccb->ccb_h.path, "%s\n", action_string); 1917 else 1918 xpt_print(ccb->ccb_h.path, "Retrying command\n"); 1919 } 1920 1921 if (devctl_err && (error != 0 || (action & SSQ_PRINT_SENSE) != 0)) 1922 cam_periph_devctl_notify(orig_ccb); 1923 1924 if ((action & SSQ_LOST) != 0) { 1925 lun_id_t lun_id; 1926 1927 /* 1928 * For a selection timeout, we consider all of the LUNs on 1929 * the target to be gone. If the status is CAM_DEV_NOT_THERE, 1930 * then we only get rid of the device(s) specified by the 1931 * path in the original CCB. 1932 */ 1933 if (status == CAM_SEL_TIMEOUT) 1934 lun_id = CAM_LUN_WILDCARD; 1935 else 1936 lun_id = xpt_path_lun_id(ccb->ccb_h.path); 1937 1938 /* Should we do more if we can't create the path?? */ 1939 if (xpt_create_path(&newpath, periph, 1940 xpt_path_path_id(ccb->ccb_h.path), 1941 xpt_path_target_id(ccb->ccb_h.path), 1942 lun_id) == CAM_REQ_CMP) { 1943 1944 /* 1945 * Let peripheral drivers know that this 1946 * device has gone away. 1947 */ 1948 xpt_async(AC_LOST_DEVICE, newpath, NULL); 1949 xpt_free_path(newpath); 1950 } 1951 } 1952 1953 /* Broadcast UNIT ATTENTIONs to all periphs. */ 1954 if ((action & SSQ_UA) != 0) 1955 xpt_async(AC_UNIT_ATTENTION, orig_ccb->ccb_h.path, orig_ccb); 1956 1957 /* Rescan target on "Reported LUNs data has changed" */ 1958 if ((action & SSQ_RESCAN) != 0) { 1959 if (xpt_create_path(&newpath, NULL, 1960 xpt_path_path_id(ccb->ccb_h.path), 1961 xpt_path_target_id(ccb->ccb_h.path), 1962 CAM_LUN_WILDCARD) == CAM_REQ_CMP) { 1963 1964 scan_ccb = xpt_alloc_ccb_nowait(); 1965 if (scan_ccb != NULL) { 1966 scan_ccb->ccb_h.path = newpath; 1967 scan_ccb->ccb_h.func_code = XPT_SCAN_TGT; 1968 scan_ccb->crcn.flags = 0; 1969 xpt_rescan(scan_ccb); 1970 } else { 1971 xpt_print(newpath, 1972 "Can't allocate CCB to rescan target\n"); 1973 xpt_free_path(newpath); 1974 } 1975 } 1976 } 1977 1978 /* Attempt a retry */ 1979 if (error == ERESTART || error == 0) { 1980 if (frozen != 0) 1981 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1982 if (error == ERESTART) 1983 xpt_action(ccb); 1984 if (frozen != 0) 1985 cam_release_devq(ccb->ccb_h.path, 1986 relsim_flags, 1987 openings, 1988 timeout, 1989 /*getcount_only*/0); 1990 } 1991 1992 return (error); 1993} 1994 1995#define CAM_PERIPH_DEVD_MSG_SIZE 256 1996 1997static void 1998cam_periph_devctl_notify(union ccb *ccb) 1999{ 2000 struct cam_periph *periph; 2001 struct ccb_getdev *cgd; 2002 struct sbuf sb; 2003 int serr, sk, asc, ascq; 2004 char *sbmsg, *type; 2005 2006 sbmsg = malloc(CAM_PERIPH_DEVD_MSG_SIZE, M_CAMPERIPH, M_NOWAIT); 2007 if (sbmsg == NULL) 2008 return; 2009 2010 sbuf_new(&sb, sbmsg, CAM_PERIPH_DEVD_MSG_SIZE, SBUF_FIXEDLEN); 2011 2012 periph = xpt_path_periph(ccb->ccb_h.path); 2013 sbuf_printf(&sb, "device=%s%d ", periph->periph_name, 2014 periph->unit_number); 2015 2016 sbuf_printf(&sb, "serial=\""); 2017 if ((cgd = (struct ccb_getdev *)xpt_alloc_ccb_nowait()) != NULL) { 2018 xpt_setup_ccb(&cgd->ccb_h, ccb->ccb_h.path, 2019 CAM_PRIORITY_NORMAL); 2020 cgd->ccb_h.func_code = XPT_GDEV_TYPE; 2021 xpt_action((union ccb *)cgd); 2022 2023 if (cgd->ccb_h.status == CAM_REQ_CMP) 2024 sbuf_bcat(&sb, cgd->serial_num, cgd->serial_num_len); 2025 xpt_free_ccb((union ccb *)cgd); 2026 } 2027 sbuf_printf(&sb, "\" "); 2028 sbuf_printf(&sb, "cam_status=\"0x%x\" ", ccb->ccb_h.status); 2029 2030 switch (ccb->ccb_h.status & CAM_STATUS_MASK) { 2031 case CAM_CMD_TIMEOUT: 2032 sbuf_printf(&sb, "timeout=%d ", ccb->ccb_h.timeout); 2033 type = "timeout"; 2034 break; 2035 case CAM_SCSI_STATUS_ERROR: 2036 sbuf_printf(&sb, "scsi_status=%d ", ccb->csio.scsi_status); 2037 if (scsi_extract_sense_ccb(ccb, &serr, &sk, &asc, &ascq)) 2038 sbuf_printf(&sb, "scsi_sense=\"%02x %02x %02x %02x\" ", 2039 serr, sk, asc, ascq); 2040 type = "error"; 2041 break; 2042 case CAM_ATA_STATUS_ERROR: 2043 sbuf_printf(&sb, "RES=\""); 2044 ata_res_sbuf(&ccb->ataio.res, &sb); 2045 sbuf_printf(&sb, "\" "); 2046 type = "error"; 2047 break; 2048 default: 2049 type = "error"; 2050 break; 2051 } 2052 2053 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 2054 sbuf_printf(&sb, "CDB=\""); 2055 scsi_cdb_sbuf(scsiio_cdb_ptr(&ccb->csio), &sb); 2056 sbuf_printf(&sb, "\" "); 2057 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) { 2058 sbuf_printf(&sb, "ACB=\""); 2059 ata_cmd_sbuf(&ccb->ataio.cmd, &sb); 2060 sbuf_printf(&sb, "\" "); 2061 } 2062 2063 if (sbuf_finish(&sb) == 0) 2064 devctl_notify("CAM", "periph", type, sbuf_data(&sb)); 2065 sbuf_delete(&sb); 2066 free(sbmsg, M_CAMPERIPH); 2067} 2068 2069