beaglebone.dts revision 262714
1/*- 2 * Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/boot/fdt/dts/arm/beaglebone.dts 262714 2014-03-03 16:00:11Z ian $ 27 */ 28 29/dts-v1/; 30 31/include/ "am335x.dtsi" 32 33/ { 34 model = "beaglebone"; 35 compatible = "beaglebone", "ti,am335x"; 36 37 aliases { 38 soc = &SOC; 39 uart0 = &uart0; 40 }; 41 42 memory { 43 device_type = "memory"; 44 reg = < 0x80000000 0x10000000 >; /* 256MB RAM */ 45 }; 46 47 am335x { 48 scm@44e10000 { 49 /* Set of triplets < padname, muxname, padstate> */ 50 scm-pad-config = 51 /* I2C0 */ 52 "I2C0_SDA", "I2C0_SDA","i2c", 53 "I2C0_SCL", "I2C0_SCL","i2c", 54 /* Ethernet */ 55 "MII1_RX_ER", "gmii1_rxerr", "input_pulldown", 56 "MII1_TX_EN", "gmii1_txen", "output", 57 "MII1_RX_DV", "gmii1_rxdv", "input_pulldown", 58 "MII1_TXD3", "gmii1_txd3", "output", 59 "MII1_TXD2", "gmii1_txd2", "output", 60 "MII1_TXD1", "gmii1_txd1", "output", 61 "MII1_TXD0", "gmii1_txd0", "output", 62 "MII1_TX_CLK", "gmii1_txclk", "input_pulldown", 63 "MII1_RX_CLK", "gmii1_rxclk", "input_pulldown", 64 "MII1_RXD3", "gmii1_rxd3", "input_pulldown", 65 "MII1_RXD2", "gmii1_rxd2", "input_pulldown", 66 "MII1_RXD1", "gmii1_rxd1", "input_pulldown", 67 "MII1_RXD0", "gmii1_rxd0", "input_pulldown", 68 "MDIO", "mdio_data", "input_pullup", 69 "MDC", "mdio_clk", "output_pullup", 70 /* MMCSD0 */ 71 "MMC0_CMD", "mmc0_cmd", "input_pullup", 72 "MMC0_CLK", "mmc0_clk", "input_pullup", 73 "MMC0_DAT0", "mmc0_dat0", "input_pullup", 74 "MMC0_DAT1", "mmc0_dat1", "input_pullup", 75 "MMC0_DAT2", "mmc0_dat2", "input_pullup", 76 "MMC0_DAT3", "mmc0_dat3", "input_pullup", 77 /* USB0 and USB1 */ 78 "USB0_DRVVBUS", "USB0_DRVVBUS", "output", 79 "USB1_DRVVBUS", "USB1_DRVVBUS", "output", 80 /* GPIO */ 81 "ECAP0_IN_PWM0_OUT", "gpio0_7", "input_pulldown", 82 "GPMC_AD10", "gpio0_26", "input_pulldown", 83 "GPMC_AD11", "gpio0_27", "input_pulldown", 84 "GPMC_AD0", "gpio1_0", "input_pulldown", 85 "GPMC_AD1", "gpio1_1", "input_pulldown", 86 "GPMC_AD2", "gpio1_2", "input_pulldown", 87 "GPMC_AD3", "gpio1_3", "input_pulldown", 88 "GPMC_AD4", "gpio1_4", "input_pulldown", 89 "GPMC_AD5", "gpio1_5", "input_pulldown", 90 "GPMC_AD6", "gpio1_6", "input_pulldown", 91 "GPMC_AD7", "gpio1_7", "input_pulldown", 92 "GPMC_AD12", "gpio1_12", "input_pulldown", 93 "GPMC_AD13", "gpio1_13", "input_pulldown", 94 "GPMC_AD14", "gpio1_14", "input_pulldown", 95 "GPMC_AD15", "gpio1_15", "input_pulldown", 96 "GPMC_A0", "gpio1_16", "input_pulldown", 97 "GPMC_A1", "gpio1_17", "input_pulldown", 98 "GPMC_A5", "gpio1_21", "output", /* User LED 1 */ 99 "GPMC_A6", "gpio1_22", "output", /* User LED 2 */ 100 "GPMC_A7", "gpio1_23", "output", /* User LED 3 */ 101 "GPMC_A8", "gpio1_24", "output", /* User LED 4 */ 102 "GPMC_BEn1", "gpio1_28", "input_pulldown", 103 "GPMC_CSn0", "gpio1_29", "input_pulldown", 104 "GPMC_CSn1", "gpio1_30", "input_pulldown", 105 "GPMC_CSn2", "gpio1_31", "input_pulldown", 106 "GPMC_CLK", "gpio2_1", "input_pulldown", 107 "LCD_DATA0", "gpio2_6", "input_pulldown", 108 "LCD_DATA1", "gpio2_7", "input_pulldown", 109 "LCD_DATA2", "gpio2_8", "input_pulldown", 110 "LCD_DATA3", "gpio2_9", "input_pulldown", 111 "LCD_DATA4", "gpio2_10", "input_pulldown", 112 "LCD_DATA5", "gpio2_11", "input_pulldown", 113 "LCD_DATA6", "gpio2_12", "input_pulldown", 114 "LCD_DATA7", "gpio2_13", "input_pulldown", 115 "LCD_VSYNC", "gpio2_22", "input_pulldown", 116 "LCD_HSYNC", "gpio2_23", "input_pulldown", 117 "LCD_PCLK", "gpio2_24", "input_pulldown", 118 "LCD_AC_BIAS_EN", "gpio2_25", "input_pulldown", 119 "MCASP0_FSR", "gpio3_19", "input_pulldown", 120 "MCASP0_AHCLKX", "gpio3_21", "input_pulldown", 121 /* TIMERs */ 122 "GPMC_ADVn_ALE", "timer4", "output", 123 "GPMC_BEn0_CLE", "timer5", "output", 124 "GPMC_WEn", "timer6", "output", 125 "GPMC_OEn_REn", "timer7", "output", 126 /* PWM */ 127 "GPMC_A2", "ehrpwm1A", "output", 128 "GPMC_A3", "ehrpwm1B", "output", 129 "GPMC_AD8", "ehrpwm2A", "output", 130 "GPMC_AD9", "ehrpwm2B", "output"; 131 }; 132 133 i2c@44e0b000 { 134 pmic@24 { 135 compatible = "ti,am335x-pmic"; 136 reg = <0x24>; 137 }; 138 }; 139 }; 140 141 chosen { 142 stdin = "uart0"; 143 stdout = "uart0"; 144 }; 145}; 146