bcm2835_mbox.c revision 276298
1/*- 2 * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27#include <sys/cdefs.h> 28__FBSDID("$FreeBSD: head/sys/arm/broadcom/bcm2835/bcm2835_mbox.c 276298 2014-12-27 14:06:05Z loos $"); 29 30#include <sys/param.h> 31#include <sys/systm.h> 32#include <sys/bus.h> 33#include <sys/kernel.h> 34#include <sys/module.h> 35#include <sys/malloc.h> 36#include <sys/rman.h> 37#include <sys/sema.h> 38#include <sys/timeet.h> 39#include <sys/timetc.h> 40#include <sys/watchdog.h> 41#include <machine/bus.h> 42#include <machine/cpu.h> 43#include <machine/intr.h> 44 45#include <dev/fdt/fdt_common.h> 46#include <dev/ofw/openfirm.h> 47#include <dev/ofw/ofw_bus.h> 48#include <dev/ofw/ofw_bus_subr.h> 49 50#include <machine/bus.h> 51#include <machine/fdt.h> 52 53#include <arm/broadcom/bcm2835/bcm2835_mbox.h> 54 55#include "mbox_if.h" 56 57#define REG_READ 0x00 58#define REG_POL 0x10 59#define REG_SENDER 0x14 60#define REG_STATUS 0x18 61#define STATUS_FULL 0x80000000 62#define STATUS_EMPTY 0x40000000 63#define REG_CONFIG 0x1C 64#define CONFIG_DATA_IRQ 0x00000001 65#define REG_WRITE 0x20 /* This is Mailbox 1 address */ 66 67#define MBOX_MSG(chan, data) (((data) & ~0xf) | ((chan) & 0xf)) 68#define MBOX_CHAN(msg) ((msg) & 0xf) 69#define MBOX_DATA(msg) ((msg) & ~0xf) 70 71#define MBOX_LOCK(sc) do { \ 72 mtx_lock(&(sc)->lock); \ 73} while(0) 74 75#define MBOX_UNLOCK(sc) do { \ 76 mtx_unlock(&(sc)->lock); \ 77} while(0) 78 79#ifdef DEBUG 80#define dprintf(fmt, args...) printf(fmt, ##args) 81#else 82#define dprintf(fmt, args...) 83#endif 84 85struct bcm_mbox_softc { 86 struct mtx lock; 87 struct resource * mem_res; 88 struct resource * irq_res; 89 void* intr_hl; 90 bus_space_tag_t bst; 91 bus_space_handle_t bsh; 92 int msg[BCM2835_MBOX_CHANS]; 93 struct sema sema[BCM2835_MBOX_CHANS]; 94}; 95 96#define mbox_read_4(sc, reg) \ 97 bus_space_read_4((sc)->bst, (sc)->bsh, reg) 98#define mbox_write_4(sc, reg, val) \ 99 bus_space_write_4((sc)->bst, (sc)->bsh, reg, val) 100 101static void 102bcm_mbox_intr(void *arg) 103{ 104 struct bcm_mbox_softc *sc = arg; 105 int chan; 106 uint32_t data; 107 uint32_t msg; 108 109 while (!(mbox_read_4(sc, REG_STATUS) & STATUS_EMPTY)) { 110 msg = mbox_read_4(sc, REG_READ); 111 dprintf("bcm_mbox_intr: raw data %08x\n", msg); 112 chan = MBOX_CHAN(msg); 113 data = MBOX_DATA(msg); 114 if (sc->msg[chan]) { 115 printf("bcm_mbox_intr: channel %d oveflow\n", chan); 116 continue; 117 } 118 dprintf("bcm_mbox_intr: chan %d, data %08x\n", chan, data); 119 sc->msg[chan] = msg; 120 sema_post(&sc->sema[chan]); 121 } 122} 123 124static int 125bcm_mbox_probe(device_t dev) 126{ 127 128 if (!ofw_bus_status_okay(dev)) 129 return (ENXIO); 130 131 if (ofw_bus_is_compatible(dev, "broadcom,bcm2835-mbox")) { 132 device_set_desc(dev, "BCM2835 VideoCore Mailbox"); 133 return(BUS_PROBE_DEFAULT); 134 } 135 136 return (ENXIO); 137} 138 139static int 140bcm_mbox_attach(device_t dev) 141{ 142 struct bcm_mbox_softc *sc = device_get_softc(dev); 143 int i; 144 int rid = 0; 145 146 sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); 147 if (sc->mem_res == NULL) { 148 device_printf(dev, "could not allocate memory resource\n"); 149 return (ENXIO); 150 } 151 152 sc->bst = rman_get_bustag(sc->mem_res); 153 sc->bsh = rman_get_bushandle(sc->mem_res); 154 155 rid = 0; 156 sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); 157 if (sc->irq_res == NULL) { 158 device_printf(dev, "could not allocate interrupt resource\n"); 159 return (ENXIO); 160 } 161 162 /* Setup and enable the timer */ 163 if (bus_setup_intr(dev, sc->irq_res, INTR_MPSAFE | INTR_TYPE_MISC, 164 NULL, bcm_mbox_intr, sc, &sc->intr_hl) != 0) { 165 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->irq_res); 166 device_printf(dev, "Unable to setup the clock irq handler.\n"); 167 return (ENXIO); 168 } 169 170 mtx_init(&sc->lock, "vcio mbox", NULL, MTX_DEF); 171 for (i = 0; i < BCM2835_MBOX_CHANS; i++) { 172 sc->msg[i] = 0; 173 sema_init(&sc->sema[i], 0, "mbox"); 174 } 175 176 /* Read all pending messages */ 177 while ((mbox_read_4(sc, REG_STATUS) & STATUS_EMPTY) == 0) 178 (void)mbox_read_4(sc, REG_READ); 179 180 mbox_write_4(sc, REG_CONFIG, CONFIG_DATA_IRQ); 181 182 return (0); 183} 184 185/* 186 * Mailbox API 187 */ 188static int 189bcm_mbox_write(device_t dev, int chan, uint32_t data) 190{ 191 int limit = 20000; 192 struct bcm_mbox_softc *sc = device_get_softc(dev); 193 194 dprintf("bcm_mbox_write: chan %d, data %08x\n", chan, data); 195 MBOX_LOCK(sc); 196 197 while ((mbox_read_4(sc, REG_STATUS) & STATUS_FULL) && limit--) { 198 DELAY(2); 199 } 200 201 if (limit == 0) { 202 printf("bcm_mbox_write: STATUS_FULL stuck"); 203 MBOX_UNLOCK(sc); 204 return (EAGAIN); 205 } 206 207 mbox_write_4(sc, REG_WRITE, MBOX_MSG(chan, data)); 208 209 MBOX_UNLOCK(sc); 210 return (0); 211} 212 213static int 214bcm_mbox_read(device_t dev, int chan, uint32_t *data) 215{ 216 struct bcm_mbox_softc *sc = device_get_softc(dev); 217 218 dprintf("bcm_mbox_read: chan %d\n", chan); 219 MBOX_LOCK(sc); 220 while (sema_trywait(&sc->sema[chan]) == 0) { 221 /* do not unlock sc while waiting for the mbox */ 222 if (sema_timedwait(&sc->sema[chan], 10*hz) == 0) 223 break; 224 printf("timeout sema for chan %d\n", chan); 225 } 226 /* 227 * get data from intr handler, the same channel is never coming 228 * because of holding sc lock. 229 */ 230 *data = MBOX_DATA(sc->msg[chan]); 231 sc->msg[chan] = 0; 232 MBOX_UNLOCK(sc); 233 dprintf("bcm_mbox_read: chan %d, data %08x\n", chan, *data); 234 235 return (0); 236} 237 238static device_method_t bcm_mbox_methods[] = { 239 DEVMETHOD(device_probe, bcm_mbox_probe), 240 DEVMETHOD(device_attach, bcm_mbox_attach), 241 242 DEVMETHOD(mbox_read, bcm_mbox_read), 243 DEVMETHOD(mbox_write, bcm_mbox_write), 244 245 DEVMETHOD_END 246}; 247 248static driver_t bcm_mbox_driver = { 249 "mbox", 250 bcm_mbox_methods, 251 sizeof(struct bcm_mbox_softc), 252}; 253 254static devclass_t bcm_mbox_devclass; 255 256DRIVER_MODULE(mbox, simplebus, bcm_mbox_driver, bcm_mbox_devclass, 0, 0); 257 258