machdep.c revision 216253
1/*- 2 * Copyright (c) 2003 Peter Wemm. 3 * Copyright (c) 1992 Terrence R. Lambert. 4 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * William Jolitz. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the University of 21 * California, Berkeley and its contributors. 22 * 4. Neither the name of the University nor the names of its contributors 23 * may be used to endorse or promote products derived from this software 24 * without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 * 38 * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 39 */ 40 41#include <sys/cdefs.h> 42__FBSDID("$FreeBSD: head/sys/amd64/amd64/machdep.c 216253 2010-12-07 12:17:43Z kib $"); 43 44#include "opt_atalk.h" 45#include "opt_atpic.h" 46#include "opt_compat.h" 47#include "opt_cpu.h" 48#include "opt_ddb.h" 49#include "opt_inet.h" 50#include "opt_ipx.h" 51#include "opt_isa.h" 52#include "opt_kstack_pages.h" 53#include "opt_maxmem.h" 54#include "opt_msgbuf.h" 55#include "opt_perfmon.h" 56#include "opt_sched.h" 57#include "opt_kdtrace.h" 58 59#include <sys/param.h> 60#include <sys/proc.h> 61#include <sys/systm.h> 62#include <sys/bio.h> 63#include <sys/buf.h> 64#include <sys/bus.h> 65#include <sys/callout.h> 66#include <sys/cons.h> 67#include <sys/cpu.h> 68#include <sys/eventhandler.h> 69#include <sys/exec.h> 70#include <sys/imgact.h> 71#include <sys/kdb.h> 72#include <sys/kernel.h> 73#include <sys/ktr.h> 74#include <sys/linker.h> 75#include <sys/lock.h> 76#include <sys/malloc.h> 77#include <sys/memrange.h> 78#include <sys/msgbuf.h> 79#include <sys/mutex.h> 80#include <sys/pcpu.h> 81#include <sys/ptrace.h> 82#include <sys/reboot.h> 83#include <sys/sched.h> 84#include <sys/signalvar.h> 85#include <sys/syscallsubr.h> 86#include <sys/sysctl.h> 87#include <sys/sysent.h> 88#include <sys/sysproto.h> 89#include <sys/ucontext.h> 90#include <sys/vmmeter.h> 91 92#include <vm/vm.h> 93#include <vm/vm_extern.h> 94#include <vm/vm_kern.h> 95#include <vm/vm_page.h> 96#include <vm/vm_map.h> 97#include <vm/vm_object.h> 98#include <vm/vm_pager.h> 99#include <vm/vm_param.h> 100 101#ifdef DDB 102#ifndef KDB 103#error KDB must be enabled in order for DDB to work! 104#endif 105#include <ddb/ddb.h> 106#include <ddb/db_sym.h> 107#endif 108 109#include <net/netisr.h> 110 111#include <machine/clock.h> 112#include <machine/cpu.h> 113#include <machine/cputypes.h> 114#include <machine/intr_machdep.h> 115#include <x86/mca.h> 116#include <machine/md_var.h> 117#include <machine/metadata.h> 118#include <machine/pc/bios.h> 119#include <machine/pcb.h> 120#include <machine/proc.h> 121#include <machine/reg.h> 122#include <machine/sigframe.h> 123#include <machine/specialreg.h> 124#ifdef PERFMON 125#include <machine/perfmon.h> 126#endif 127#include <machine/tss.h> 128#ifdef SMP 129#include <machine/smp.h> 130#endif 131 132#ifdef DEV_ATPIC 133#include <x86/isa/icu.h> 134#else 135#include <machine/apicvar.h> 136#endif 137 138#include <isa/isareg.h> 139#include <isa/rtc.h> 140 141/* Sanity check for __curthread() */ 142CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); 143 144extern u_int64_t hammer_time(u_int64_t, u_int64_t); 145 146extern void printcpuinfo(void); /* XXX header file */ 147extern void identify_cpu(void); 148extern void panicifcpuunsupported(void); 149 150#define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) 151#define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) 152 153static void cpu_startup(void *); 154static void get_fpcontext(struct thread *td, mcontext_t *mcp); 155static int set_fpcontext(struct thread *td, const mcontext_t *mcp); 156SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); 157 158#ifdef DDB 159extern vm_offset_t ksym_start, ksym_end; 160#endif 161 162struct msgbuf *msgbufp; 163 164/* Intel ICH registers */ 165#define ICH_PMBASE 0x400 166#define ICH_SMI_EN ICH_PMBASE + 0x30 167 168int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel; 169 170int cold = 1; 171 172long Maxmem = 0; 173long realmem = 0; 174 175/* 176 * The number of PHYSMAP entries must be one less than the number of 177 * PHYSSEG entries because the PHYSMAP entry that spans the largest 178 * physical address that is accessible by ISA DMA is split into two 179 * PHYSSEG entries. 180 */ 181#define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) 182 183vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; 184vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; 185 186/* must be 2 less so 0 0 can signal end of chunks */ 187#define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) 188#define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) 189 190struct kva_md_info kmi; 191 192static struct trapframe proc0_tf; 193struct region_descriptor r_gdt, r_idt; 194 195struct pcpu __pcpu[MAXCPU]; 196 197struct mtx icu_lock; 198 199struct mem_range_softc mem_range_softc; 200 201struct mtx dt_lock; /* lock for GDT and LDT */ 202 203static void 204cpu_startup(dummy) 205 void *dummy; 206{ 207 uintmax_t memsize; 208 char *sysenv; 209 210 /* 211 * On MacBooks, we need to disallow the legacy USB circuit to 212 * generate an SMI# because this can cause several problems, 213 * namely: incorrect CPU frequency detection and failure to 214 * start the APs. 215 * We do this by disabling a bit in the SMI_EN (SMI Control and 216 * Enable register) of the Intel ICH LPC Interface Bridge. 217 */ 218 sysenv = getenv("smbios.system.product"); 219 if (sysenv != NULL) { 220 if (strncmp(sysenv, "MacBook1,1", 10) == 0 || 221 strncmp(sysenv, "MacBook3,1", 10) == 0 || 222 strncmp(sysenv, "MacBookPro1,1", 13) == 0 || 223 strncmp(sysenv, "MacBookPro1,2", 13) == 0 || 224 strncmp(sysenv, "MacBookPro3,1", 13) == 0 || 225 strncmp(sysenv, "Macmini1,1", 10) == 0) { 226 if (bootverbose) 227 printf("Disabling LEGACY_USB_EN bit on " 228 "Intel ICH.\n"); 229 outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); 230 } 231 freeenv(sysenv); 232 } 233 234 /* 235 * Good {morning,afternoon,evening,night}. 236 */ 237 startrtclock(); 238 printcpuinfo(); 239 panicifcpuunsupported(); 240#ifdef PERFMON 241 perfmon_init(); 242#endif 243 realmem = Maxmem; 244 245 /* 246 * Display physical memory if SMBIOS reports reasonable amount. 247 */ 248 memsize = 0; 249 sysenv = getenv("smbios.memory.enabled"); 250 if (sysenv != NULL) { 251 memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; 252 freeenv(sysenv); 253 } 254 if (memsize < ptoa((uintmax_t)cnt.v_free_count)) 255 memsize = ptoa((uintmax_t)Maxmem); 256 printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); 257 258 /* 259 * Display any holes after the first chunk of extended memory. 260 */ 261 if (bootverbose) { 262 int indx; 263 264 printf("Physical memory chunk(s):\n"); 265 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { 266 vm_paddr_t size; 267 268 size = phys_avail[indx + 1] - phys_avail[indx]; 269 printf( 270 "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", 271 (uintmax_t)phys_avail[indx], 272 (uintmax_t)phys_avail[indx + 1] - 1, 273 (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); 274 } 275 } 276 277 vm_ksubmap_init(&kmi); 278 279 printf("avail memory = %ju (%ju MB)\n", 280 ptoa((uintmax_t)cnt.v_free_count), 281 ptoa((uintmax_t)cnt.v_free_count) / 1048576); 282 283 /* 284 * Set up buffers, so they can be used to read disk labels. 285 */ 286 bufinit(); 287 vm_pager_bufferinit(); 288 289 cpu_setregs(); 290} 291 292/* 293 * Send an interrupt to process. 294 * 295 * Stack is set up to allow sigcode stored 296 * at top to call routine, followed by call 297 * to sigreturn routine below. After sigreturn 298 * resets the signal mask, the stack, and the 299 * frame pointer, it returns to the user 300 * specified pc, psl. 301 */ 302void 303sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) 304{ 305 struct sigframe sf, *sfp; 306 struct proc *p; 307 struct thread *td; 308 struct sigacts *psp; 309 char *sp; 310 struct trapframe *regs; 311 int sig; 312 int oonstack; 313 314 td = curthread; 315 p = td->td_proc; 316 PROC_LOCK_ASSERT(p, MA_OWNED); 317 sig = ksi->ksi_signo; 318 psp = p->p_sigacts; 319 mtx_assert(&psp->ps_mtx, MA_OWNED); 320 regs = td->td_frame; 321 oonstack = sigonstack(regs->tf_rsp); 322 323 /* Save user context. */ 324 bzero(&sf, sizeof(sf)); 325 sf.sf_uc.uc_sigmask = *mask; 326 sf.sf_uc.uc_stack = td->td_sigstk; 327 sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) 328 ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; 329 sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; 330 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs)); 331 sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ 332 get_fpcontext(td, &sf.sf_uc.uc_mcontext); 333 fpstate_drop(td); 334 sf.sf_uc.uc_mcontext.mc_fsbase = td->td_pcb->pcb_fsbase; 335 sf.sf_uc.uc_mcontext.mc_gsbase = td->td_pcb->pcb_gsbase; 336 337 /* Allocate space for the signal handler context. */ 338 if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && 339 SIGISMEMBER(psp->ps_sigonstack, sig)) { 340 sp = td->td_sigstk.ss_sp + 341 td->td_sigstk.ss_size - sizeof(struct sigframe); 342#if defined(COMPAT_43) 343 td->td_sigstk.ss_flags |= SS_ONSTACK; 344#endif 345 } else 346 sp = (char *)regs->tf_rsp - sizeof(struct sigframe) - 128; 347 /* Align to 16 bytes. */ 348 sfp = (struct sigframe *)((unsigned long)sp & ~0xFul); 349 350 /* Translate the signal if appropriate. */ 351 if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) 352 sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; 353 354 /* Build the argument list for the signal handler. */ 355 regs->tf_rdi = sig; /* arg 1 in %rdi */ 356 regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */ 357 if (SIGISMEMBER(psp->ps_siginfo, sig)) { 358 /* Signal handler installed with SA_SIGINFO. */ 359 regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */ 360 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; 361 362 /* Fill in POSIX parts */ 363 sf.sf_si = ksi->ksi_info; 364 sf.sf_si.si_signo = sig; /* maybe a translated signal */ 365 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 366 } else { 367 /* Old FreeBSD-style arguments. */ 368 regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */ 369 regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ 370 sf.sf_ahu.sf_handler = catcher; 371 } 372 mtx_unlock(&psp->ps_mtx); 373 PROC_UNLOCK(p); 374 375 /* 376 * Copy the sigframe out to the user's stack. 377 */ 378 if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { 379#ifdef DEBUG 380 printf("process %ld has trashed its stack\n", (long)p->p_pid); 381#endif 382 PROC_LOCK(p); 383 sigexit(td, SIGILL); 384 } 385 386 regs->tf_rsp = (long)sfp; 387 regs->tf_rip = PS_STRINGS - *(p->p_sysent->sv_szsigcode); 388 regs->tf_rflags &= ~(PSL_T | PSL_D); 389 regs->tf_cs = _ucodesel; 390 regs->tf_ds = _udatasel; 391 regs->tf_es = _udatasel; 392 regs->tf_fs = _ufssel; 393 regs->tf_gs = _ugssel; 394 regs->tf_flags = TF_HASSEGS; 395 td->td_pcb->pcb_full_iret = 1; 396 PROC_LOCK(p); 397 mtx_lock(&psp->ps_mtx); 398} 399 400/* 401 * System call to cleanup state after a signal 402 * has been taken. Reset signal mask and 403 * stack state from context left by sendsig (above). 404 * Return to previous pc and psl as specified by 405 * context left by sendsig. Check carefully to 406 * make sure that the user has not modified the 407 * state to gain improper privileges. 408 * 409 * MPSAFE 410 */ 411int 412sigreturn(td, uap) 413 struct thread *td; 414 struct sigreturn_args /* { 415 const struct __ucontext *sigcntxp; 416 } */ *uap; 417{ 418 ucontext_t uc; 419 struct proc *p = td->td_proc; 420 struct trapframe *regs; 421 ucontext_t *ucp; 422 long rflags; 423 int cs, error, ret; 424 ksiginfo_t ksi; 425 426 error = copyin(uap->sigcntxp, &uc, sizeof(uc)); 427 if (error != 0) { 428 uprintf("pid %d (%s): sigreturn copyin failed\n", 429 p->p_pid, td->td_name); 430 return (error); 431 } 432 ucp = &uc; 433 if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { 434 uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid, 435 td->td_name, ucp->uc_mcontext.mc_flags); 436 return (EINVAL); 437 } 438 regs = td->td_frame; 439 rflags = ucp->uc_mcontext.mc_rflags; 440 /* 441 * Don't allow users to change privileged or reserved flags. 442 */ 443 /* 444 * XXX do allow users to change the privileged flag PSL_RF. 445 * The cpu sets PSL_RF in tf_rflags for faults. Debuggers 446 * should sometimes set it there too. tf_rflags is kept in 447 * the signal context during signal handling and there is no 448 * other place to remember it, so the PSL_RF bit may be 449 * corrupted by the signal handler without us knowing. 450 * Corruption of the PSL_RF bit at worst causes one more or 451 * one less debugger trap, so allowing it is fairly harmless. 452 */ 453 if (!EFL_SECURE(rflags & ~PSL_RF, regs->tf_rflags & ~PSL_RF)) { 454 uprintf("pid %d (%s): sigreturn rflags = 0x%lx\n", p->p_pid, 455 td->td_name, rflags); 456 return (EINVAL); 457 } 458 459 /* 460 * Don't allow users to load a valid privileged %cs. Let the 461 * hardware check for invalid selectors, excess privilege in 462 * other selectors, invalid %eip's and invalid %esp's. 463 */ 464 cs = ucp->uc_mcontext.mc_cs; 465 if (!CS_SECURE(cs)) { 466 uprintf("pid %d (%s): sigreturn cs = 0x%x\n", p->p_pid, 467 td->td_name, cs); 468 ksiginfo_init_trap(&ksi); 469 ksi.ksi_signo = SIGBUS; 470 ksi.ksi_code = BUS_OBJERR; 471 ksi.ksi_trapno = T_PROTFLT; 472 ksi.ksi_addr = (void *)regs->tf_rip; 473 trapsignal(td, &ksi); 474 return (EINVAL); 475 } 476 477 ret = set_fpcontext(td, &ucp->uc_mcontext); 478 if (ret != 0) { 479 uprintf("pid %d (%s): sigreturn set_fpcontext err %d\n", 480 p->p_pid, td->td_name, ret); 481 return (ret); 482 } 483 bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs)); 484 td->td_pcb->pcb_fsbase = ucp->uc_mcontext.mc_fsbase; 485 td->td_pcb->pcb_gsbase = ucp->uc_mcontext.mc_gsbase; 486 487#if defined(COMPAT_43) 488 if (ucp->uc_mcontext.mc_onstack & 1) 489 td->td_sigstk.ss_flags |= SS_ONSTACK; 490 else 491 td->td_sigstk.ss_flags &= ~SS_ONSTACK; 492#endif 493 494 kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); 495 td->td_pcb->pcb_full_iret = 1; 496 return (EJUSTRETURN); 497} 498 499#ifdef COMPAT_FREEBSD4 500int 501freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap) 502{ 503 504 return sigreturn(td, (struct sigreturn_args *)uap); 505} 506#endif 507 508 509/* 510 * Machine dependent boot() routine 511 * 512 * I haven't seen anything to put here yet 513 * Possibly some stuff might be grafted back here from boot() 514 */ 515void 516cpu_boot(int howto) 517{ 518} 519 520/* 521 * Flush the D-cache for non-DMA I/O so that the I-cache can 522 * be made coherent later. 523 */ 524void 525cpu_flush_dcache(void *ptr, size_t len) 526{ 527 /* Not applicable */ 528} 529 530/* Get current clock frequency for the given cpu id. */ 531int 532cpu_est_clockrate(int cpu_id, uint64_t *rate) 533{ 534 register_t reg; 535 uint64_t tsc1, tsc2; 536 537 if (pcpu_find(cpu_id) == NULL || rate == NULL) 538 return (EINVAL); 539 540 /* If we're booting, trust the rate calibrated moments ago. */ 541 if (cold) { 542 *rate = tsc_freq; 543 return (0); 544 } 545 546#ifdef SMP 547 /* Schedule ourselves on the indicated cpu. */ 548 thread_lock(curthread); 549 sched_bind(curthread, cpu_id); 550 thread_unlock(curthread); 551#endif 552 553 /* Calibrate by measuring a short delay. */ 554 reg = intr_disable(); 555 tsc1 = rdtsc(); 556 DELAY(1000); 557 tsc2 = rdtsc(); 558 intr_restore(reg); 559 560#ifdef SMP 561 thread_lock(curthread); 562 sched_unbind(curthread); 563 thread_unlock(curthread); 564#endif 565 566 /* 567 * Calculate the difference in readings, convert to Mhz, and 568 * subtract 0.5% of the total. Empirical testing has shown that 569 * overhead in DELAY() works out to approximately this value. 570 */ 571 tsc2 -= tsc1; 572 *rate = tsc2 * 1000 - tsc2 * 5; 573 return (0); 574} 575 576/* 577 * Shutdown the CPU as much as possible 578 */ 579void 580cpu_halt(void) 581{ 582 for (;;) 583 __asm__ ("hlt"); 584} 585 586void (*cpu_idle_hook)(void) = NULL; /* ACPI idle hook. */ 587static int cpu_ident_amdc1e = 0; /* AMD C1E supported. */ 588static int idle_mwait = 1; /* Use MONITOR/MWAIT for short idle. */ 589TUNABLE_INT("machdep.idle_mwait", &idle_mwait); 590SYSCTL_INT(_machdep, OID_AUTO, idle_mwait, CTLFLAG_RW, &idle_mwait, 591 0, "Use MONITOR/MWAIT for short idle"); 592 593#define STATE_RUNNING 0x0 594#define STATE_MWAIT 0x1 595#define STATE_SLEEPING 0x2 596 597static void 598cpu_idle_acpi(int busy) 599{ 600 int *state; 601 602 state = (int *)PCPU_PTR(monitorbuf); 603 *state = STATE_SLEEPING; 604 disable_intr(); 605 if (sched_runnable()) 606 enable_intr(); 607 else if (cpu_idle_hook) 608 cpu_idle_hook(); 609 else 610 __asm __volatile("sti; hlt"); 611 *state = STATE_RUNNING; 612} 613 614static void 615cpu_idle_hlt(int busy) 616{ 617 int *state; 618 619 state = (int *)PCPU_PTR(monitorbuf); 620 *state = STATE_SLEEPING; 621 /* 622 * We must absolutely guarentee that hlt is the next instruction 623 * after sti or we introduce a timing window. 624 */ 625 disable_intr(); 626 if (sched_runnable()) 627 enable_intr(); 628 else 629 __asm __volatile("sti; hlt"); 630 *state = STATE_RUNNING; 631} 632 633/* 634 * MWAIT cpu power states. Lower 4 bits are sub-states. 635 */ 636#define MWAIT_C0 0xf0 637#define MWAIT_C1 0x00 638#define MWAIT_C2 0x10 639#define MWAIT_C3 0x20 640#define MWAIT_C4 0x30 641 642static void 643cpu_idle_mwait(int busy) 644{ 645 int *state; 646 647 state = (int *)PCPU_PTR(monitorbuf); 648 *state = STATE_MWAIT; 649 if (!sched_runnable()) { 650 cpu_monitor(state, 0, 0); 651 if (*state == STATE_MWAIT) 652 cpu_mwait(0, MWAIT_C1); 653 } 654 *state = STATE_RUNNING; 655} 656 657static void 658cpu_idle_spin(int busy) 659{ 660 int *state; 661 int i; 662 663 state = (int *)PCPU_PTR(monitorbuf); 664 *state = STATE_RUNNING; 665 for (i = 0; i < 1000; i++) { 666 if (sched_runnable()) 667 return; 668 cpu_spinwait(); 669 } 670} 671 672/* 673 * C1E renders the local APIC timer dead, so we disable it by 674 * reading the Interrupt Pending Message register and clearing 675 * both C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27). 676 * 677 * Reference: 678 * "BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors" 679 * #32559 revision 3.00+ 680 */ 681#define MSR_AMDK8_IPM 0xc0010055 682#define AMDK8_SMIONCMPHALT (1ULL << 27) 683#define AMDK8_C1EONCMPHALT (1ULL << 28) 684#define AMDK8_CMPHALT (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT) 685 686static void 687cpu_probe_amdc1e(void) 688{ 689 690 /* 691 * Detect the presence of C1E capability mostly on latest 692 * dual-cores (or future) k8 family. 693 */ 694 if (cpu_vendor_id == CPU_VENDOR_AMD && 695 (cpu_id & 0x00000f00) == 0x00000f00 && 696 (cpu_id & 0x0fff0000) >= 0x00040000) { 697 cpu_ident_amdc1e = 1; 698 } 699} 700 701void (*cpu_idle_fn)(int) = cpu_idle_acpi; 702 703void 704cpu_idle(int busy) 705{ 706 uint64_t msr; 707 708 CTR2(KTR_SPARE2, "cpu_idle(%d) at %d", 709 busy, curcpu); 710#ifdef SMP 711 if (mp_grab_cpu_hlt()) 712 return; 713#endif 714 /* If we are busy - try to use fast methods. */ 715 if (busy) { 716 if ((cpu_feature2 & CPUID2_MON) && idle_mwait) { 717 cpu_idle_mwait(busy); 718 goto out; 719 } 720 } 721 722 /* If we have time - switch timers into idle mode. */ 723 if (!busy) { 724 critical_enter(); 725 cpu_idleclock(); 726 } 727 728 /* Apply AMD APIC timer C1E workaround. */ 729 if (cpu_ident_amdc1e && cpu_disable_deep_sleep) { 730 msr = rdmsr(MSR_AMDK8_IPM); 731 if (msr & AMDK8_CMPHALT) 732 wrmsr(MSR_AMDK8_IPM, msr & ~AMDK8_CMPHALT); 733 } 734 735 /* Call main idle method. */ 736 cpu_idle_fn(busy); 737 738 /* Switch timers mack into active mode. */ 739 if (!busy) { 740 cpu_activeclock(); 741 critical_exit(); 742 } 743out: 744 CTR2(KTR_SPARE2, "cpu_idle(%d) at %d done", 745 busy, curcpu); 746} 747 748int 749cpu_idle_wakeup(int cpu) 750{ 751 struct pcpu *pcpu; 752 int *state; 753 754 pcpu = pcpu_find(cpu); 755 state = (int *)pcpu->pc_monitorbuf; 756 /* 757 * This doesn't need to be atomic since missing the race will 758 * simply result in unnecessary IPIs. 759 */ 760 if (*state == STATE_SLEEPING) 761 return (0); 762 if (*state == STATE_MWAIT) 763 *state = STATE_RUNNING; 764 return (1); 765} 766 767/* 768 * Ordered by speed/power consumption. 769 */ 770struct { 771 void *id_fn; 772 char *id_name; 773} idle_tbl[] = { 774 { cpu_idle_spin, "spin" }, 775 { cpu_idle_mwait, "mwait" }, 776 { cpu_idle_hlt, "hlt" }, 777 { cpu_idle_acpi, "acpi" }, 778 { NULL, NULL } 779}; 780 781static int 782idle_sysctl_available(SYSCTL_HANDLER_ARGS) 783{ 784 char *avail, *p; 785 int error; 786 int i; 787 788 avail = malloc(256, M_TEMP, M_WAITOK); 789 p = avail; 790 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 791 if (strstr(idle_tbl[i].id_name, "mwait") && 792 (cpu_feature2 & CPUID2_MON) == 0) 793 continue; 794 if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && 795 cpu_idle_hook == NULL) 796 continue; 797 p += sprintf(p, "%s%s", p != avail ? ", " : "", 798 idle_tbl[i].id_name); 799 } 800 error = sysctl_handle_string(oidp, avail, 0, req); 801 free(avail, M_TEMP); 802 return (error); 803} 804 805SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD, 806 0, 0, idle_sysctl_available, "A", "list of available idle functions"); 807 808static int 809idle_sysctl(SYSCTL_HANDLER_ARGS) 810{ 811 char buf[16]; 812 int error; 813 char *p; 814 int i; 815 816 p = "unknown"; 817 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 818 if (idle_tbl[i].id_fn == cpu_idle_fn) { 819 p = idle_tbl[i].id_name; 820 break; 821 } 822 } 823 strncpy(buf, p, sizeof(buf)); 824 error = sysctl_handle_string(oidp, buf, sizeof(buf), req); 825 if (error != 0 || req->newptr == NULL) 826 return (error); 827 for (i = 0; idle_tbl[i].id_name != NULL; i++) { 828 if (strstr(idle_tbl[i].id_name, "mwait") && 829 (cpu_feature2 & CPUID2_MON) == 0) 830 continue; 831 if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && 832 cpu_idle_hook == NULL) 833 continue; 834 if (strcmp(idle_tbl[i].id_name, buf)) 835 continue; 836 cpu_idle_fn = idle_tbl[i].id_fn; 837 return (0); 838 } 839 return (EINVAL); 840} 841 842SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW, 0, 0, 843 idle_sysctl, "A", "currently selected idle function"); 844 845/* 846 * Reset registers to default values on exec. 847 */ 848void 849exec_setregs(struct thread *td, struct image_params *imgp, u_long stack) 850{ 851 struct trapframe *regs = td->td_frame; 852 struct pcb *pcb = td->td_pcb; 853 854 mtx_lock(&dt_lock); 855 if (td->td_proc->p_md.md_ldt != NULL) 856 user_ldt_free(td); 857 else 858 mtx_unlock(&dt_lock); 859 860 pcb->pcb_fsbase = 0; 861 pcb->pcb_gsbase = 0; 862 pcb->pcb_flags &= ~(PCB_32BIT | PCB_GS32BIT); 863 pcb->pcb_initial_fpucw = __INITIAL_FPUCW__; 864 pcb->pcb_full_iret = 1; 865 866 bzero((char *)regs, sizeof(struct trapframe)); 867 regs->tf_rip = imgp->entry_addr; 868 regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; 869 regs->tf_rdi = stack; /* argv */ 870 regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T); 871 regs->tf_ss = _udatasel; 872 regs->tf_cs = _ucodesel; 873 regs->tf_ds = _udatasel; 874 regs->tf_es = _udatasel; 875 regs->tf_fs = _ufssel; 876 regs->tf_gs = _ugssel; 877 regs->tf_flags = TF_HASSEGS; 878 td->td_retval[1] = 0; 879 880 /* 881 * Reset the hardware debug registers if they were in use. 882 * They won't have any meaning for the newly exec'd process. 883 */ 884 if (pcb->pcb_flags & PCB_DBREGS) { 885 pcb->pcb_dr0 = 0; 886 pcb->pcb_dr1 = 0; 887 pcb->pcb_dr2 = 0; 888 pcb->pcb_dr3 = 0; 889 pcb->pcb_dr6 = 0; 890 pcb->pcb_dr7 = 0; 891 if (pcb == PCPU_GET(curpcb)) { 892 /* 893 * Clear the debug registers on the running 894 * CPU, otherwise they will end up affecting 895 * the next process we switch to. 896 */ 897 reset_dbregs(); 898 } 899 pcb->pcb_flags &= ~PCB_DBREGS; 900 } 901 902 /* 903 * Drop the FP state if we hold it, so that the process gets a 904 * clean FP state if it uses the FPU again. 905 */ 906 fpstate_drop(td); 907} 908 909void 910cpu_setregs(void) 911{ 912 register_t cr0; 913 914 cr0 = rcr0(); 915 /* 916 * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the 917 * BSP. See the comments there about why we set them. 918 */ 919 cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; 920 load_cr0(cr0); 921} 922 923/* 924 * Initialize amd64 and configure to run kernel 925 */ 926 927/* 928 * Initialize segments & interrupt table 929 */ 930 931struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor tables */ 932static struct gate_descriptor idt0[NIDT]; 933struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ 934 935static char dblfault_stack[PAGE_SIZE] __aligned(16); 936 937static char nmi0_stack[PAGE_SIZE] __aligned(16); 938CTASSERT(sizeof(struct nmi_pcpu) == 16); 939 940struct amd64tss common_tss[MAXCPU]; 941 942/* 943 * Software prototypes -- in more palatable form. 944 * 945 * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same 946 * slots as corresponding segments for i386 kernel. 947 */ 948struct soft_segment_descriptor gdt_segs[] = { 949/* GNULL_SEL 0 Null Descriptor */ 950{ .ssd_base = 0x0, 951 .ssd_limit = 0x0, 952 .ssd_type = 0, 953 .ssd_dpl = 0, 954 .ssd_p = 0, 955 .ssd_long = 0, 956 .ssd_def32 = 0, 957 .ssd_gran = 0 }, 958/* GNULL2_SEL 1 Null Descriptor */ 959{ .ssd_base = 0x0, 960 .ssd_limit = 0x0, 961 .ssd_type = 0, 962 .ssd_dpl = 0, 963 .ssd_p = 0, 964 .ssd_long = 0, 965 .ssd_def32 = 0, 966 .ssd_gran = 0 }, 967/* GUFS32_SEL 2 32 bit %gs Descriptor for user */ 968{ .ssd_base = 0x0, 969 .ssd_limit = 0xfffff, 970 .ssd_type = SDT_MEMRWA, 971 .ssd_dpl = SEL_UPL, 972 .ssd_p = 1, 973 .ssd_long = 0, 974 .ssd_def32 = 1, 975 .ssd_gran = 1 }, 976/* GUGS32_SEL 3 32 bit %fs Descriptor for user */ 977{ .ssd_base = 0x0, 978 .ssd_limit = 0xfffff, 979 .ssd_type = SDT_MEMRWA, 980 .ssd_dpl = SEL_UPL, 981 .ssd_p = 1, 982 .ssd_long = 0, 983 .ssd_def32 = 1, 984 .ssd_gran = 1 }, 985/* GCODE_SEL 4 Code Descriptor for kernel */ 986{ .ssd_base = 0x0, 987 .ssd_limit = 0xfffff, 988 .ssd_type = SDT_MEMERA, 989 .ssd_dpl = SEL_KPL, 990 .ssd_p = 1, 991 .ssd_long = 1, 992 .ssd_def32 = 0, 993 .ssd_gran = 1 }, 994/* GDATA_SEL 5 Data Descriptor for kernel */ 995{ .ssd_base = 0x0, 996 .ssd_limit = 0xfffff, 997 .ssd_type = SDT_MEMRWA, 998 .ssd_dpl = SEL_KPL, 999 .ssd_p = 1, 1000 .ssd_long = 1, 1001 .ssd_def32 = 0, 1002 .ssd_gran = 1 }, 1003/* GUCODE32_SEL 6 32 bit Code Descriptor for user */ 1004{ .ssd_base = 0x0, 1005 .ssd_limit = 0xfffff, 1006 .ssd_type = SDT_MEMERA, 1007 .ssd_dpl = SEL_UPL, 1008 .ssd_p = 1, 1009 .ssd_long = 0, 1010 .ssd_def32 = 1, 1011 .ssd_gran = 1 }, 1012/* GUDATA_SEL 7 32/64 bit Data Descriptor for user */ 1013{ .ssd_base = 0x0, 1014 .ssd_limit = 0xfffff, 1015 .ssd_type = SDT_MEMRWA, 1016 .ssd_dpl = SEL_UPL, 1017 .ssd_p = 1, 1018 .ssd_long = 0, 1019 .ssd_def32 = 1, 1020 .ssd_gran = 1 }, 1021/* GUCODE_SEL 8 64 bit Code Descriptor for user */ 1022{ .ssd_base = 0x0, 1023 .ssd_limit = 0xfffff, 1024 .ssd_type = SDT_MEMERA, 1025 .ssd_dpl = SEL_UPL, 1026 .ssd_p = 1, 1027 .ssd_long = 1, 1028 .ssd_def32 = 0, 1029 .ssd_gran = 1 }, 1030/* GPROC0_SEL 9 Proc 0 Tss Descriptor */ 1031{ .ssd_base = 0x0, 1032 .ssd_limit = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE - 1, 1033 .ssd_type = SDT_SYSTSS, 1034 .ssd_dpl = SEL_KPL, 1035 .ssd_p = 1, 1036 .ssd_long = 0, 1037 .ssd_def32 = 0, 1038 .ssd_gran = 0 }, 1039/* Actually, the TSS is a system descriptor which is double size */ 1040{ .ssd_base = 0x0, 1041 .ssd_limit = 0x0, 1042 .ssd_type = 0, 1043 .ssd_dpl = 0, 1044 .ssd_p = 0, 1045 .ssd_long = 0, 1046 .ssd_def32 = 0, 1047 .ssd_gran = 0 }, 1048/* GUSERLDT_SEL 11 LDT Descriptor */ 1049{ .ssd_base = 0x0, 1050 .ssd_limit = 0x0, 1051 .ssd_type = 0, 1052 .ssd_dpl = 0, 1053 .ssd_p = 0, 1054 .ssd_long = 0, 1055 .ssd_def32 = 0, 1056 .ssd_gran = 0 }, 1057/* GUSERLDT_SEL 12 LDT Descriptor, double size */ 1058{ .ssd_base = 0x0, 1059 .ssd_limit = 0x0, 1060 .ssd_type = 0, 1061 .ssd_dpl = 0, 1062 .ssd_p = 0, 1063 .ssd_long = 0, 1064 .ssd_def32 = 0, 1065 .ssd_gran = 0 }, 1066}; 1067 1068void 1069setidt(idx, func, typ, dpl, ist) 1070 int idx; 1071 inthand_t *func; 1072 int typ; 1073 int dpl; 1074 int ist; 1075{ 1076 struct gate_descriptor *ip; 1077 1078 ip = idt + idx; 1079 ip->gd_looffset = (uintptr_t)func; 1080 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); 1081 ip->gd_ist = ist; 1082 ip->gd_xx = 0; 1083 ip->gd_type = typ; 1084 ip->gd_dpl = dpl; 1085 ip->gd_p = 1; 1086 ip->gd_hioffset = ((uintptr_t)func)>>16 ; 1087} 1088 1089extern inthand_t 1090 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), 1091 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), 1092 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), 1093 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), 1094 IDTVEC(xmm), IDTVEC(dblfault), 1095#ifdef KDTRACE_HOOKS 1096 IDTVEC(dtrace_ret), 1097#endif 1098 IDTVEC(fast_syscall), IDTVEC(fast_syscall32); 1099 1100#ifdef DDB 1101/* 1102 * Display the index and function name of any IDT entries that don't use 1103 * the default 'rsvd' entry point. 1104 */ 1105DB_SHOW_COMMAND(idt, db_show_idt) 1106{ 1107 struct gate_descriptor *ip; 1108 int idx; 1109 uintptr_t func; 1110 1111 ip = idt; 1112 for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { 1113 func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset); 1114 if (func != (uintptr_t)&IDTVEC(rsvd)) { 1115 db_printf("%3d\t", idx); 1116 db_printsym(func, DB_STGY_PROC); 1117 db_printf("\n"); 1118 } 1119 ip++; 1120 } 1121} 1122#endif 1123 1124void 1125sdtossd(sd, ssd) 1126 struct user_segment_descriptor *sd; 1127 struct soft_segment_descriptor *ssd; 1128{ 1129 1130 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; 1131 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; 1132 ssd->ssd_type = sd->sd_type; 1133 ssd->ssd_dpl = sd->sd_dpl; 1134 ssd->ssd_p = sd->sd_p; 1135 ssd->ssd_long = sd->sd_long; 1136 ssd->ssd_def32 = sd->sd_def32; 1137 ssd->ssd_gran = sd->sd_gran; 1138} 1139 1140void 1141ssdtosd(ssd, sd) 1142 struct soft_segment_descriptor *ssd; 1143 struct user_segment_descriptor *sd; 1144{ 1145 1146 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 1147 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; 1148 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 1149 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 1150 sd->sd_type = ssd->ssd_type; 1151 sd->sd_dpl = ssd->ssd_dpl; 1152 sd->sd_p = ssd->ssd_p; 1153 sd->sd_long = ssd->ssd_long; 1154 sd->sd_def32 = ssd->ssd_def32; 1155 sd->sd_gran = ssd->ssd_gran; 1156} 1157 1158void 1159ssdtosyssd(ssd, sd) 1160 struct soft_segment_descriptor *ssd; 1161 struct system_segment_descriptor *sd; 1162{ 1163 1164 sd->sd_lobase = (ssd->ssd_base) & 0xffffff; 1165 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; 1166 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; 1167 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; 1168 sd->sd_type = ssd->ssd_type; 1169 sd->sd_dpl = ssd->ssd_dpl; 1170 sd->sd_p = ssd->ssd_p; 1171 sd->sd_gran = ssd->ssd_gran; 1172} 1173 1174#if !defined(DEV_ATPIC) && defined(DEV_ISA) 1175#include <isa/isavar.h> 1176#include <isa/isareg.h> 1177/* 1178 * Return a bitmap of the current interrupt requests. This is 8259-specific 1179 * and is only suitable for use at probe time. 1180 * This is only here to pacify sio. It is NOT FATAL if this doesn't work. 1181 * It shouldn't be here. There should probably be an APIC centric 1182 * implementation in the apic driver code, if at all. 1183 */ 1184intrmask_t 1185isa_irq_pending(void) 1186{ 1187 u_char irr1; 1188 u_char irr2; 1189 1190 irr1 = inb(IO_ICU1); 1191 irr2 = inb(IO_ICU2); 1192 return ((irr2 << 8) | irr1); 1193} 1194#endif 1195 1196u_int basemem; 1197 1198static int 1199add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) 1200{ 1201 int i, insert_idx, physmap_idx; 1202 1203 physmap_idx = *physmap_idxp; 1204 1205 if (boothowto & RB_VERBOSE) 1206 printf("SMAP type=%02x base=%016lx len=%016lx\n", 1207 smap->type, smap->base, smap->length); 1208 1209 if (smap->type != SMAP_TYPE_MEMORY) 1210 return (1); 1211 1212 if (smap->length == 0) 1213 return (0); 1214 1215 /* 1216 * Find insertion point while checking for overlap. Start off by 1217 * assuming the new entry will be added to the end. 1218 */ 1219 insert_idx = physmap_idx + 2; 1220 for (i = 0; i <= physmap_idx; i += 2) { 1221 if (smap->base < physmap[i + 1]) { 1222 if (smap->base + smap->length <= physmap[i]) { 1223 insert_idx = i; 1224 break; 1225 } 1226 if (boothowto & RB_VERBOSE) 1227 printf( 1228 "Overlapping memory regions, ignoring second region\n"); 1229 return (1); 1230 } 1231 } 1232 1233 /* See if we can prepend to the next entry. */ 1234 if (insert_idx <= physmap_idx && 1235 smap->base + smap->length == physmap[insert_idx]) { 1236 physmap[insert_idx] = smap->base; 1237 return (1); 1238 } 1239 1240 /* See if we can append to the previous entry. */ 1241 if (insert_idx > 0 && smap->base == physmap[insert_idx - 1]) { 1242 physmap[insert_idx - 1] += smap->length; 1243 return (1); 1244 } 1245 1246 physmap_idx += 2; 1247 *physmap_idxp = physmap_idx; 1248 if (physmap_idx == PHYSMAP_SIZE) { 1249 printf( 1250 "Too many segments in the physical address map, giving up\n"); 1251 return (0); 1252 } 1253 1254 /* 1255 * Move the last 'N' entries down to make room for the new 1256 * entry if needed. 1257 */ 1258 for (i = physmap_idx; i > insert_idx; i -= 2) { 1259 physmap[i] = physmap[i - 2]; 1260 physmap[i + 1] = physmap[i - 1]; 1261 } 1262 1263 /* Insert the new entry. */ 1264 physmap[insert_idx] = smap->base; 1265 physmap[insert_idx + 1] = smap->base + smap->length; 1266 return (1); 1267} 1268 1269/* 1270 * Populate the (physmap) array with base/bound pairs describing the 1271 * available physical memory in the system, then test this memory and 1272 * build the phys_avail array describing the actually-available memory. 1273 * 1274 * If we cannot accurately determine the physical memory map, then use 1275 * value from the 0xE801 call, and failing that, the RTC. 1276 * 1277 * Total memory size may be set by the kernel environment variable 1278 * hw.physmem or the compile-time define MAXMEM. 1279 * 1280 * XXX first should be vm_paddr_t. 1281 */ 1282static void 1283getmemsize(caddr_t kmdp, u_int64_t first) 1284{ 1285 int i, physmap_idx, pa_indx, da_indx; 1286 vm_paddr_t pa, physmap[PHYSMAP_SIZE]; 1287 u_long physmem_tunable; 1288 pt_entry_t *pte; 1289 struct bios_smap *smapbase, *smap, *smapend; 1290 u_int32_t smapsize; 1291 quad_t dcons_addr, dcons_size; 1292 1293 bzero(physmap, sizeof(physmap)); 1294 basemem = 0; 1295 physmap_idx = 0; 1296 1297 /* 1298 * get memory map from INT 15:E820, kindly supplied by the loader. 1299 * 1300 * subr_module.c says: 1301 * "Consumer may safely assume that size value precedes data." 1302 * ie: an int32_t immediately precedes smap. 1303 */ 1304 smapbase = (struct bios_smap *)preload_search_info(kmdp, 1305 MODINFO_METADATA | MODINFOMD_SMAP); 1306 if (smapbase == NULL) 1307 panic("No BIOS smap info from loader!"); 1308 1309 smapsize = *((u_int32_t *)smapbase - 1); 1310 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); 1311 1312 for (smap = smapbase; smap < smapend; smap++) 1313 if (!add_smap_entry(smap, physmap, &physmap_idx)) 1314 break; 1315 1316 /* 1317 * Find the 'base memory' segment for SMP 1318 */ 1319 basemem = 0; 1320 for (i = 0; i <= physmap_idx; i += 2) { 1321 if (physmap[i] == 0x00000000) { 1322 basemem = physmap[i + 1] / 1024; 1323 break; 1324 } 1325 } 1326 if (basemem == 0) 1327 panic("BIOS smap did not include a basemem segment!"); 1328 1329#ifdef SMP 1330 /* make hole for AP bootstrap code */ 1331 physmap[1] = mp_bootaddress(physmap[1] / 1024); 1332#endif 1333 1334 /* 1335 * Maxmem isn't the "maximum memory", it's one larger than the 1336 * highest page of the physical address space. It should be 1337 * called something like "Maxphyspage". We may adjust this 1338 * based on ``hw.physmem'' and the results of the memory test. 1339 */ 1340 Maxmem = atop(physmap[physmap_idx + 1]); 1341 1342#ifdef MAXMEM 1343 Maxmem = MAXMEM / 4; 1344#endif 1345 1346 if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) 1347 Maxmem = atop(physmem_tunable); 1348 1349 /* 1350 * Don't allow MAXMEM or hw.physmem to extend the amount of memory 1351 * in the system. 1352 */ 1353 if (Maxmem > atop(physmap[physmap_idx + 1])) 1354 Maxmem = atop(physmap[physmap_idx + 1]); 1355 1356 if (atop(physmap[physmap_idx + 1]) != Maxmem && 1357 (boothowto & RB_VERBOSE)) 1358 printf("Physical memory use set to %ldK\n", Maxmem * 4); 1359 1360 /* call pmap initialization to make new kernel address space */ 1361 pmap_bootstrap(&first); 1362 1363 /* 1364 * Size up each available chunk of physical memory. 1365 */ 1366 physmap[0] = PAGE_SIZE; /* mask off page 0 */ 1367 pa_indx = 0; 1368 da_indx = 1; 1369 phys_avail[pa_indx++] = physmap[0]; 1370 phys_avail[pa_indx] = physmap[0]; 1371 dump_avail[da_indx] = physmap[0]; 1372 pte = CMAP1; 1373 1374 /* 1375 * Get dcons buffer address 1376 */ 1377 if (getenv_quad("dcons.addr", &dcons_addr) == 0 || 1378 getenv_quad("dcons.size", &dcons_size) == 0) 1379 dcons_addr = 0; 1380 1381 /* 1382 * physmap is in bytes, so when converting to page boundaries, 1383 * round up the start address and round down the end address. 1384 */ 1385 for (i = 0; i <= physmap_idx; i += 2) { 1386 vm_paddr_t end; 1387 1388 end = ptoa((vm_paddr_t)Maxmem); 1389 if (physmap[i + 1] < end) 1390 end = trunc_page(physmap[i + 1]); 1391 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { 1392 int tmp, page_bad, full; 1393 int *ptr = (int *)CADDR1; 1394 1395 full = FALSE; 1396 /* 1397 * block out kernel memory as not available. 1398 */ 1399 if (pa >= 0x100000 && pa < first) 1400 goto do_dump_avail; 1401 1402 /* 1403 * block out dcons buffer 1404 */ 1405 if (dcons_addr > 0 1406 && pa >= trunc_page(dcons_addr) 1407 && pa < dcons_addr + dcons_size) 1408 goto do_dump_avail; 1409 1410 page_bad = FALSE; 1411 1412 /* 1413 * map page into kernel: valid, read/write,non-cacheable 1414 */ 1415 *pte = pa | PG_V | PG_RW | PG_N; 1416 invltlb(); 1417 1418 tmp = *(int *)ptr; 1419 /* 1420 * Test for alternating 1's and 0's 1421 */ 1422 *(volatile int *)ptr = 0xaaaaaaaa; 1423 if (*(volatile int *)ptr != 0xaaaaaaaa) 1424 page_bad = TRUE; 1425 /* 1426 * Test for alternating 0's and 1's 1427 */ 1428 *(volatile int *)ptr = 0x55555555; 1429 if (*(volatile int *)ptr != 0x55555555) 1430 page_bad = TRUE; 1431 /* 1432 * Test for all 1's 1433 */ 1434 *(volatile int *)ptr = 0xffffffff; 1435 if (*(volatile int *)ptr != 0xffffffff) 1436 page_bad = TRUE; 1437 /* 1438 * Test for all 0's 1439 */ 1440 *(volatile int *)ptr = 0x0; 1441 if (*(volatile int *)ptr != 0x0) 1442 page_bad = TRUE; 1443 /* 1444 * Restore original value. 1445 */ 1446 *(int *)ptr = tmp; 1447 1448 /* 1449 * Adjust array of valid/good pages. 1450 */ 1451 if (page_bad == TRUE) 1452 continue; 1453 /* 1454 * If this good page is a continuation of the 1455 * previous set of good pages, then just increase 1456 * the end pointer. Otherwise start a new chunk. 1457 * Note that "end" points one higher than end, 1458 * making the range >= start and < end. 1459 * If we're also doing a speculative memory 1460 * test and we at or past the end, bump up Maxmem 1461 * so that we keep going. The first bad page 1462 * will terminate the loop. 1463 */ 1464 if (phys_avail[pa_indx] == pa) { 1465 phys_avail[pa_indx] += PAGE_SIZE; 1466 } else { 1467 pa_indx++; 1468 if (pa_indx == PHYS_AVAIL_ARRAY_END) { 1469 printf( 1470 "Too many holes in the physical address space, giving up\n"); 1471 pa_indx--; 1472 full = TRUE; 1473 goto do_dump_avail; 1474 } 1475 phys_avail[pa_indx++] = pa; /* start */ 1476 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ 1477 } 1478 physmem++; 1479do_dump_avail: 1480 if (dump_avail[da_indx] == pa) { 1481 dump_avail[da_indx] += PAGE_SIZE; 1482 } else { 1483 da_indx++; 1484 if (da_indx == DUMP_AVAIL_ARRAY_END) { 1485 da_indx--; 1486 goto do_next; 1487 } 1488 dump_avail[da_indx++] = pa; /* start */ 1489 dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ 1490 } 1491do_next: 1492 if (full) 1493 break; 1494 } 1495 } 1496 *pte = 0; 1497 invltlb(); 1498 1499 /* 1500 * XXX 1501 * The last chunk must contain at least one page plus the message 1502 * buffer to avoid complicating other code (message buffer address 1503 * calculation, etc.). 1504 */ 1505 while (phys_avail[pa_indx - 1] + PAGE_SIZE + 1506 round_page(MSGBUF_SIZE) >= phys_avail[pa_indx]) { 1507 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); 1508 phys_avail[pa_indx--] = 0; 1509 phys_avail[pa_indx--] = 0; 1510 } 1511 1512 Maxmem = atop(phys_avail[pa_indx]); 1513 1514 /* Trim off space for the message buffer. */ 1515 phys_avail[pa_indx] -= round_page(MSGBUF_SIZE); 1516 1517 /* Map the message buffer. */ 1518 msgbufp = (struct msgbuf *)PHYS_TO_DMAP(phys_avail[pa_indx]); 1519} 1520 1521u_int64_t 1522hammer_time(u_int64_t modulep, u_int64_t physfree) 1523{ 1524 caddr_t kmdp; 1525 int gsel_tss, x; 1526 struct pcpu *pc; 1527 struct nmi_pcpu *np; 1528 u_int64_t msr; 1529 char *env; 1530 1531 thread0.td_kstack = physfree + KERNBASE; 1532 bzero((void *)thread0.td_kstack, KSTACK_PAGES * PAGE_SIZE); 1533 physfree += KSTACK_PAGES * PAGE_SIZE; 1534 thread0.td_pcb = (struct pcb *) 1535 (thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE) - 1; 1536 1537 /* 1538 * This may be done better later if it gets more high level 1539 * components in it. If so just link td->td_proc here. 1540 */ 1541 proc_linkup0(&proc0, &thread0); 1542 1543 preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); 1544 preload_bootstrap_relocate(KERNBASE); 1545 kmdp = preload_search_by_type("elf kernel"); 1546 if (kmdp == NULL) 1547 kmdp = preload_search_by_type("elf64 kernel"); 1548 boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); 1549 kern_envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + KERNBASE; 1550#ifdef DDB 1551 ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); 1552 ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); 1553#endif 1554 1555 /* Init basic tunables, hz etc */ 1556 init_param1(); 1557 1558 /* 1559 * make gdt memory segments 1560 */ 1561 for (x = 0; x < NGDT; x++) { 1562 if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && 1563 x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1) 1564 ssdtosd(&gdt_segs[x], &gdt[x]); 1565 } 1566 gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0]; 1567 ssdtosyssd(&gdt_segs[GPROC0_SEL], 1568 (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1569 1570 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; 1571 r_gdt.rd_base = (long) gdt; 1572 lgdt(&r_gdt); 1573 pc = &__pcpu[0]; 1574 1575 wrmsr(MSR_FSBASE, 0); /* User value */ 1576 wrmsr(MSR_GSBASE, (u_int64_t)pc); 1577 wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ 1578 1579 pcpu_init(pc, 0, sizeof(struct pcpu)); 1580 dpcpu_init((void *)(physfree + KERNBASE), 0); 1581 physfree += DPCPU_SIZE; 1582 PCPU_SET(prvspace, pc); 1583 PCPU_SET(curthread, &thread0); 1584 PCPU_SET(curpcb, thread0.td_pcb); 1585 PCPU_SET(tssp, &common_tss[0]); 1586 PCPU_SET(commontssp, &common_tss[0]); 1587 PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); 1588 PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]); 1589 PCPU_SET(fs32p, &gdt[GUFS32_SEL]); 1590 PCPU_SET(gs32p, &gdt[GUGS32_SEL]); 1591 1592 /* 1593 * Initialize mutexes. 1594 * 1595 * icu_lock: in order to allow an interrupt to occur in a critical 1596 * section, to set pcpu->ipending (etc...) properly, we 1597 * must be able to get the icu lock, so it can't be 1598 * under witness. 1599 */ 1600 mutex_init(); 1601 mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); 1602 mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF); 1603 1604 /* exceptions */ 1605 for (x = 0; x < NIDT; x++) 1606 setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); 1607 setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); 1608 setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0); 1609 setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2); 1610 setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); 1611 setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0); 1612 setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); 1613 setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); 1614 setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); 1615 setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); 1616 setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); 1617 setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); 1618 setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); 1619 setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); 1620 setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); 1621 setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); 1622 setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); 1623 setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); 1624 setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0); 1625 setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); 1626#ifdef KDTRACE_HOOKS 1627 setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYSIGT, SEL_UPL, 0); 1628#endif 1629 1630 r_idt.rd_limit = sizeof(idt0) - 1; 1631 r_idt.rd_base = (long) idt; 1632 lidt(&r_idt); 1633 1634 /* 1635 * Initialize the i8254 before the console so that console 1636 * initialization can use DELAY(). 1637 */ 1638 i8254_init(); 1639 1640 /* 1641 * Initialize the console before we print anything out. 1642 */ 1643 cninit(); 1644 1645#ifdef DEV_ISA 1646#ifdef DEV_ATPIC 1647 elcr_probe(); 1648 atpic_startup(); 1649#else 1650 /* Reset and mask the atpics and leave them shut down. */ 1651 atpic_reset(); 1652 1653 /* 1654 * Point the ICU spurious interrupt vectors at the APIC spurious 1655 * interrupt handler. 1656 */ 1657 setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1658 setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); 1659#endif 1660#else 1661#error "have you forgotten the isa device?"; 1662#endif 1663 1664 kdb_init(); 1665 1666#ifdef KDB 1667 if (boothowto & RB_KDB) 1668 kdb_enter(KDB_WHY_BOOTFLAGS, 1669 "Boot flags requested debugger"); 1670#endif 1671 1672 identify_cpu(); /* Final stage of CPU initialization */ 1673 initializecpu(); /* Initialize CPU registers */ 1674 initializecpucache(); 1675 1676 /* make an initial tss so cpu can get interrupt stack on syscall! */ 1677 common_tss[0].tss_rsp0 = thread0.td_kstack + \ 1678 KSTACK_PAGES * PAGE_SIZE - sizeof(struct pcb); 1679 /* Ensure the stack is aligned to 16 bytes */ 1680 common_tss[0].tss_rsp0 &= ~0xFul; 1681 PCPU_SET(rsp0, common_tss[0].tss_rsp0); 1682 1683 /* doublefault stack space, runs on ist1 */ 1684 common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)]; 1685 1686 /* 1687 * NMI stack, runs on ist2. The pcpu pointer is stored just 1688 * above the start of the ist2 stack. 1689 */ 1690 np = ((struct nmi_pcpu *) &nmi0_stack[sizeof(nmi0_stack)]) - 1; 1691 np->np_pcpu = (register_t) pc; 1692 common_tss[0].tss_ist2 = (long) np; 1693 1694 /* Set the IO permission bitmap (empty due to tss seg limit) */ 1695 common_tss[0].tss_iobase = sizeof(struct amd64tss) + 1696 IOPAGES * PAGE_SIZE; 1697 1698 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); 1699 ltr(gsel_tss); 1700 1701 /* Set up the fast syscall stuff */ 1702 msr = rdmsr(MSR_EFER) | EFER_SCE; 1703 wrmsr(MSR_EFER, msr); 1704 wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); 1705 wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); 1706 msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | 1707 ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); 1708 wrmsr(MSR_STAR, msr); 1709 wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); 1710 1711 getmemsize(kmdp, physfree); 1712 init_param2(physmem); 1713 1714 /* now running on new page tables, configured,and u/iom is accessible */ 1715 1716 msgbufinit(msgbufp, MSGBUF_SIZE); 1717 fpuinit(); 1718 1719 /* transfer to user mode */ 1720 1721 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); 1722 _udatasel = GSEL(GUDATA_SEL, SEL_UPL); 1723 _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); 1724 _ufssel = GSEL(GUFS32_SEL, SEL_UPL); 1725 _ugssel = GSEL(GUGS32_SEL, SEL_UPL); 1726 1727 load_ds(_udatasel); 1728 load_es(_udatasel); 1729 load_fs(_ufssel); 1730 1731 /* setup proc 0's pcb */ 1732 thread0.td_pcb->pcb_flags = 0; 1733 thread0.td_pcb->pcb_cr3 = KPML4phys; 1734 thread0.td_frame = &proc0_tf; 1735 1736 env = getenv("kernelname"); 1737 if (env != NULL) 1738 strlcpy(kernelname, env, sizeof(kernelname)); 1739 1740#ifdef XENHVM 1741 if (inw(0x10) == 0x49d2) { 1742 if (bootverbose) 1743 printf("Xen detected: disabling emulated block and network devices\n"); 1744 outw(0x10, 3); 1745 } 1746#endif 1747 1748 cpu_probe_amdc1e(); 1749 1750 /* Location of kernel stack for locore */ 1751 return ((u_int64_t)thread0.td_pcb); 1752} 1753 1754void 1755cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) 1756{ 1757 1758 pcpu->pc_acpi_id = 0xffffffff; 1759} 1760 1761void 1762spinlock_enter(void) 1763{ 1764 struct thread *td; 1765 register_t flags; 1766 1767 td = curthread; 1768 if (td->td_md.md_spinlock_count == 0) { 1769 flags = intr_disable(); 1770 td->td_md.md_spinlock_count = 1; 1771 td->td_md.md_saved_flags = flags; 1772 } else 1773 td->td_md.md_spinlock_count++; 1774 critical_enter(); 1775} 1776 1777void 1778spinlock_exit(void) 1779{ 1780 struct thread *td; 1781 register_t flags; 1782 1783 td = curthread; 1784 critical_exit(); 1785 flags = td->td_md.md_saved_flags; 1786 td->td_md.md_spinlock_count--; 1787 if (td->td_md.md_spinlock_count == 0) 1788 intr_restore(flags); 1789} 1790 1791/* 1792 * Construct a PCB from a trapframe. This is called from kdb_trap() where 1793 * we want to start a backtrace from the function that caused us to enter 1794 * the debugger. We have the context in the trapframe, but base the trace 1795 * on the PCB. The PCB doesn't have to be perfect, as long as it contains 1796 * enough for a backtrace. 1797 */ 1798void 1799makectx(struct trapframe *tf, struct pcb *pcb) 1800{ 1801 1802 pcb->pcb_r12 = tf->tf_r12; 1803 pcb->pcb_r13 = tf->tf_r13; 1804 pcb->pcb_r14 = tf->tf_r14; 1805 pcb->pcb_r15 = tf->tf_r15; 1806 pcb->pcb_rbp = tf->tf_rbp; 1807 pcb->pcb_rbx = tf->tf_rbx; 1808 pcb->pcb_rip = tf->tf_rip; 1809 pcb->pcb_rsp = tf->tf_rsp; 1810} 1811 1812int 1813ptrace_set_pc(struct thread *td, unsigned long addr) 1814{ 1815 td->td_frame->tf_rip = addr; 1816 return (0); 1817} 1818 1819int 1820ptrace_single_step(struct thread *td) 1821{ 1822 td->td_frame->tf_rflags |= PSL_T; 1823 return (0); 1824} 1825 1826int 1827ptrace_clear_single_step(struct thread *td) 1828{ 1829 td->td_frame->tf_rflags &= ~PSL_T; 1830 return (0); 1831} 1832 1833int 1834fill_regs(struct thread *td, struct reg *regs) 1835{ 1836 struct trapframe *tp; 1837 1838 tp = td->td_frame; 1839 regs->r_r15 = tp->tf_r15; 1840 regs->r_r14 = tp->tf_r14; 1841 regs->r_r13 = tp->tf_r13; 1842 regs->r_r12 = tp->tf_r12; 1843 regs->r_r11 = tp->tf_r11; 1844 regs->r_r10 = tp->tf_r10; 1845 regs->r_r9 = tp->tf_r9; 1846 regs->r_r8 = tp->tf_r8; 1847 regs->r_rdi = tp->tf_rdi; 1848 regs->r_rsi = tp->tf_rsi; 1849 regs->r_rbp = tp->tf_rbp; 1850 regs->r_rbx = tp->tf_rbx; 1851 regs->r_rdx = tp->tf_rdx; 1852 regs->r_rcx = tp->tf_rcx; 1853 regs->r_rax = tp->tf_rax; 1854 regs->r_rip = tp->tf_rip; 1855 regs->r_cs = tp->tf_cs; 1856 regs->r_rflags = tp->tf_rflags; 1857 regs->r_rsp = tp->tf_rsp; 1858 regs->r_ss = tp->tf_ss; 1859 if (tp->tf_flags & TF_HASSEGS) { 1860 regs->r_ds = tp->tf_ds; 1861 regs->r_es = tp->tf_es; 1862 regs->r_fs = tp->tf_fs; 1863 regs->r_gs = tp->tf_gs; 1864 } else { 1865 regs->r_ds = 0; 1866 regs->r_es = 0; 1867 regs->r_fs = 0; 1868 regs->r_gs = 0; 1869 } 1870 return (0); 1871} 1872 1873int 1874set_regs(struct thread *td, struct reg *regs) 1875{ 1876 struct trapframe *tp; 1877 register_t rflags; 1878 1879 tp = td->td_frame; 1880 rflags = regs->r_rflags & 0xffffffff; 1881 if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs)) 1882 return (EINVAL); 1883 tp->tf_r15 = regs->r_r15; 1884 tp->tf_r14 = regs->r_r14; 1885 tp->tf_r13 = regs->r_r13; 1886 tp->tf_r12 = regs->r_r12; 1887 tp->tf_r11 = regs->r_r11; 1888 tp->tf_r10 = regs->r_r10; 1889 tp->tf_r9 = regs->r_r9; 1890 tp->tf_r8 = regs->r_r8; 1891 tp->tf_rdi = regs->r_rdi; 1892 tp->tf_rsi = regs->r_rsi; 1893 tp->tf_rbp = regs->r_rbp; 1894 tp->tf_rbx = regs->r_rbx; 1895 tp->tf_rdx = regs->r_rdx; 1896 tp->tf_rcx = regs->r_rcx; 1897 tp->tf_rax = regs->r_rax; 1898 tp->tf_rip = regs->r_rip; 1899 tp->tf_cs = regs->r_cs; 1900 tp->tf_rflags = rflags; 1901 tp->tf_rsp = regs->r_rsp; 1902 tp->tf_ss = regs->r_ss; 1903 if (0) { /* XXXKIB */ 1904 tp->tf_ds = regs->r_ds; 1905 tp->tf_es = regs->r_es; 1906 tp->tf_fs = regs->r_fs; 1907 tp->tf_gs = regs->r_gs; 1908 tp->tf_flags = TF_HASSEGS; 1909 } 1910 return (0); 1911} 1912 1913/* XXX check all this stuff! */ 1914/* externalize from sv_xmm */ 1915static void 1916fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs) 1917{ 1918 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1919 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1920 int i; 1921 1922 /* pcb -> fpregs */ 1923 bzero(fpregs, sizeof(*fpregs)); 1924 1925 /* FPU control/status */ 1926 penv_fpreg->en_cw = penv_xmm->en_cw; 1927 penv_fpreg->en_sw = penv_xmm->en_sw; 1928 penv_fpreg->en_tw = penv_xmm->en_tw; 1929 penv_fpreg->en_opcode = penv_xmm->en_opcode; 1930 penv_fpreg->en_rip = penv_xmm->en_rip; 1931 penv_fpreg->en_rdp = penv_xmm->en_rdp; 1932 penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr; 1933 penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask; 1934 1935 /* FPU registers */ 1936 for (i = 0; i < 8; ++i) 1937 bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10); 1938 1939 /* SSE registers */ 1940 for (i = 0; i < 16; ++i) 1941 bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16); 1942} 1943 1944/* internalize from fpregs into sv_xmm */ 1945static void 1946set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm) 1947{ 1948 struct envxmm *penv_xmm = &sv_xmm->sv_env; 1949 struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; 1950 int i; 1951 1952 /* fpregs -> pcb */ 1953 /* FPU control/status */ 1954 penv_xmm->en_cw = penv_fpreg->en_cw; 1955 penv_xmm->en_sw = penv_fpreg->en_sw; 1956 penv_xmm->en_tw = penv_fpreg->en_tw; 1957 penv_xmm->en_opcode = penv_fpreg->en_opcode; 1958 penv_xmm->en_rip = penv_fpreg->en_rip; 1959 penv_xmm->en_rdp = penv_fpreg->en_rdp; 1960 penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr; 1961 penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask & cpu_mxcsr_mask; 1962 1963 /* FPU registers */ 1964 for (i = 0; i < 8; ++i) 1965 bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10); 1966 1967 /* SSE registers */ 1968 for (i = 0; i < 16; ++i) 1969 bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16); 1970} 1971 1972/* externalize from td->pcb */ 1973int 1974fill_fpregs(struct thread *td, struct fpreg *fpregs) 1975{ 1976 1977 KASSERT(td == curthread || TD_IS_SUSPENDED(td), 1978 ("not suspended thread %p", td)); 1979 fpugetregs(td); 1980 fill_fpregs_xmm(&td->td_pcb->pcb_user_save, fpregs); 1981 return (0); 1982} 1983 1984/* internalize to td->pcb */ 1985int 1986set_fpregs(struct thread *td, struct fpreg *fpregs) 1987{ 1988 1989 set_fpregs_xmm(fpregs, &td->td_pcb->pcb_user_save); 1990 fpuuserinited(td); 1991 return (0); 1992} 1993 1994/* 1995 * Get machine context. 1996 */ 1997int 1998get_mcontext(struct thread *td, mcontext_t *mcp, int flags) 1999{ 2000 struct trapframe *tp; 2001 2002 tp = td->td_frame; 2003 PROC_LOCK(curthread->td_proc); 2004 mcp->mc_onstack = sigonstack(tp->tf_rsp); 2005 PROC_UNLOCK(curthread->td_proc); 2006 mcp->mc_r15 = tp->tf_r15; 2007 mcp->mc_r14 = tp->tf_r14; 2008 mcp->mc_r13 = tp->tf_r13; 2009 mcp->mc_r12 = tp->tf_r12; 2010 mcp->mc_r11 = tp->tf_r11; 2011 mcp->mc_r10 = tp->tf_r10; 2012 mcp->mc_r9 = tp->tf_r9; 2013 mcp->mc_r8 = tp->tf_r8; 2014 mcp->mc_rdi = tp->tf_rdi; 2015 mcp->mc_rsi = tp->tf_rsi; 2016 mcp->mc_rbp = tp->tf_rbp; 2017 mcp->mc_rbx = tp->tf_rbx; 2018 mcp->mc_rcx = tp->tf_rcx; 2019 mcp->mc_rflags = tp->tf_rflags; 2020 if (flags & GET_MC_CLEAR_RET) { 2021 mcp->mc_rax = 0; 2022 mcp->mc_rdx = 0; 2023 mcp->mc_rflags &= ~PSL_C; 2024 } else { 2025 mcp->mc_rax = tp->tf_rax; 2026 mcp->mc_rdx = tp->tf_rdx; 2027 } 2028 mcp->mc_rip = tp->tf_rip; 2029 mcp->mc_cs = tp->tf_cs; 2030 mcp->mc_rsp = tp->tf_rsp; 2031 mcp->mc_ss = tp->tf_ss; 2032 mcp->mc_ds = tp->tf_ds; 2033 mcp->mc_es = tp->tf_es; 2034 mcp->mc_fs = tp->tf_fs; 2035 mcp->mc_gs = tp->tf_gs; 2036 mcp->mc_flags = tp->tf_flags; 2037 mcp->mc_len = sizeof(*mcp); 2038 get_fpcontext(td, mcp); 2039 mcp->mc_fsbase = td->td_pcb->pcb_fsbase; 2040 mcp->mc_gsbase = td->td_pcb->pcb_gsbase; 2041 return (0); 2042} 2043 2044/* 2045 * Set machine context. 2046 * 2047 * However, we don't set any but the user modifiable flags, and we won't 2048 * touch the cs selector. 2049 */ 2050int 2051set_mcontext(struct thread *td, const mcontext_t *mcp) 2052{ 2053 struct trapframe *tp; 2054 long rflags; 2055 int ret; 2056 2057 tp = td->td_frame; 2058 if (mcp->mc_len != sizeof(*mcp) || 2059 (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) 2060 return (EINVAL); 2061 rflags = (mcp->mc_rflags & PSL_USERCHANGE) | 2062 (tp->tf_rflags & ~PSL_USERCHANGE); 2063 ret = set_fpcontext(td, mcp); 2064 if (ret != 0) 2065 return (ret); 2066 tp->tf_r15 = mcp->mc_r15; 2067 tp->tf_r14 = mcp->mc_r14; 2068 tp->tf_r13 = mcp->mc_r13; 2069 tp->tf_r12 = mcp->mc_r12; 2070 tp->tf_r11 = mcp->mc_r11; 2071 tp->tf_r10 = mcp->mc_r10; 2072 tp->tf_r9 = mcp->mc_r9; 2073 tp->tf_r8 = mcp->mc_r8; 2074 tp->tf_rdi = mcp->mc_rdi; 2075 tp->tf_rsi = mcp->mc_rsi; 2076 tp->tf_rbp = mcp->mc_rbp; 2077 tp->tf_rbx = mcp->mc_rbx; 2078 tp->tf_rdx = mcp->mc_rdx; 2079 tp->tf_rcx = mcp->mc_rcx; 2080 tp->tf_rax = mcp->mc_rax; 2081 tp->tf_rip = mcp->mc_rip; 2082 tp->tf_rflags = rflags; 2083 tp->tf_rsp = mcp->mc_rsp; 2084 tp->tf_ss = mcp->mc_ss; 2085 tp->tf_flags = mcp->mc_flags; 2086 if (tp->tf_flags & TF_HASSEGS) { 2087 tp->tf_ds = mcp->mc_ds; 2088 tp->tf_es = mcp->mc_es; 2089 tp->tf_fs = mcp->mc_fs; 2090 tp->tf_gs = mcp->mc_gs; 2091 } 2092 if (mcp->mc_flags & _MC_HASBASES) { 2093 td->td_pcb->pcb_fsbase = mcp->mc_fsbase; 2094 td->td_pcb->pcb_gsbase = mcp->mc_gsbase; 2095 } 2096 td->td_pcb->pcb_full_iret = 1; 2097 return (0); 2098} 2099 2100static void 2101get_fpcontext(struct thread *td, mcontext_t *mcp) 2102{ 2103 2104 mcp->mc_ownedfp = fpugetregs(td); 2105 bcopy(&td->td_pcb->pcb_user_save, &mcp->mc_fpstate, 2106 sizeof(mcp->mc_fpstate)); 2107 mcp->mc_fpformat = fpuformat(); 2108} 2109 2110static int 2111set_fpcontext(struct thread *td, const mcontext_t *mcp) 2112{ 2113 struct savefpu *fpstate; 2114 2115 if (mcp->mc_fpformat == _MC_FPFMT_NODEV) 2116 return (0); 2117 else if (mcp->mc_fpformat != _MC_FPFMT_XMM) 2118 return (EINVAL); 2119 else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) 2120 /* We don't care what state is left in the FPU or PCB. */ 2121 fpstate_drop(td); 2122 else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || 2123 mcp->mc_ownedfp == _MC_FPOWNED_PCB) { 2124 fpstate = (struct savefpu *)&mcp->mc_fpstate; 2125 fpstate->sv_env.en_mxcsr &= cpu_mxcsr_mask; 2126 fpusetregs(td, fpstate); 2127 } else 2128 return (EINVAL); 2129 return (0); 2130} 2131 2132void 2133fpstate_drop(struct thread *td) 2134{ 2135 2136 KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu")); 2137 critical_enter(); 2138 if (PCPU_GET(fpcurthread) == td) 2139 fpudrop(); 2140 /* 2141 * XXX force a full drop of the fpu. The above only drops it if we 2142 * owned it. 2143 * 2144 * XXX I don't much like fpugetuserregs()'s semantics of doing a full 2145 * drop. Dropping only to the pcb matches fnsave's behaviour. 2146 * We only need to drop to !PCB_INITDONE in sendsig(). But 2147 * sendsig() is the only caller of fpugetuserregs()... perhaps we just 2148 * have too many layers. 2149 */ 2150 curthread->td_pcb->pcb_flags &= ~(PCB_FPUINITDONE | 2151 PCB_USERFPUINITDONE); 2152 critical_exit(); 2153} 2154 2155int 2156fill_dbregs(struct thread *td, struct dbreg *dbregs) 2157{ 2158 struct pcb *pcb; 2159 2160 if (td == NULL) { 2161 dbregs->dr[0] = rdr0(); 2162 dbregs->dr[1] = rdr1(); 2163 dbregs->dr[2] = rdr2(); 2164 dbregs->dr[3] = rdr3(); 2165 dbregs->dr[6] = rdr6(); 2166 dbregs->dr[7] = rdr7(); 2167 } else { 2168 pcb = td->td_pcb; 2169 dbregs->dr[0] = pcb->pcb_dr0; 2170 dbregs->dr[1] = pcb->pcb_dr1; 2171 dbregs->dr[2] = pcb->pcb_dr2; 2172 dbregs->dr[3] = pcb->pcb_dr3; 2173 dbregs->dr[6] = pcb->pcb_dr6; 2174 dbregs->dr[7] = pcb->pcb_dr7; 2175 } 2176 dbregs->dr[4] = 0; 2177 dbregs->dr[5] = 0; 2178 dbregs->dr[8] = 0; 2179 dbregs->dr[9] = 0; 2180 dbregs->dr[10] = 0; 2181 dbregs->dr[11] = 0; 2182 dbregs->dr[12] = 0; 2183 dbregs->dr[13] = 0; 2184 dbregs->dr[14] = 0; 2185 dbregs->dr[15] = 0; 2186 return (0); 2187} 2188 2189int 2190set_dbregs(struct thread *td, struct dbreg *dbregs) 2191{ 2192 struct pcb *pcb; 2193 int i; 2194 2195 if (td == NULL) { 2196 load_dr0(dbregs->dr[0]); 2197 load_dr1(dbregs->dr[1]); 2198 load_dr2(dbregs->dr[2]); 2199 load_dr3(dbregs->dr[3]); 2200 load_dr6(dbregs->dr[6]); 2201 load_dr7(dbregs->dr[7]); 2202 } else { 2203 /* 2204 * Don't let an illegal value for dr7 get set. Specifically, 2205 * check for undefined settings. Setting these bit patterns 2206 * result in undefined behaviour and can lead to an unexpected 2207 * TRCTRAP or a general protection fault right here. 2208 * Upper bits of dr6 and dr7 must not be set 2209 */ 2210 for (i = 0; i < 4; i++) { 2211 if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) 2212 return (EINVAL); 2213 if (td->td_frame->tf_cs == _ucode32sel && 2214 DBREG_DR7_LEN(dbregs->dr[7], i) == DBREG_DR7_LEN_8) 2215 return (EINVAL); 2216 } 2217 if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 || 2218 (dbregs->dr[7] & 0xffffffff00000000ul) != 0) 2219 return (EINVAL); 2220 2221 pcb = td->td_pcb; 2222 2223 /* 2224 * Don't let a process set a breakpoint that is not within the 2225 * process's address space. If a process could do this, it 2226 * could halt the system by setting a breakpoint in the kernel 2227 * (if ddb was enabled). Thus, we need to check to make sure 2228 * that no breakpoints are being enabled for addresses outside 2229 * process's address space. 2230 * 2231 * XXX - what about when the watched area of the user's 2232 * address space is written into from within the kernel 2233 * ... wouldn't that still cause a breakpoint to be generated 2234 * from within kernel mode? 2235 */ 2236 2237 if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { 2238 /* dr0 is enabled */ 2239 if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) 2240 return (EINVAL); 2241 } 2242 if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { 2243 /* dr1 is enabled */ 2244 if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) 2245 return (EINVAL); 2246 } 2247 if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { 2248 /* dr2 is enabled */ 2249 if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) 2250 return (EINVAL); 2251 } 2252 if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { 2253 /* dr3 is enabled */ 2254 if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) 2255 return (EINVAL); 2256 } 2257 2258 pcb->pcb_dr0 = dbregs->dr[0]; 2259 pcb->pcb_dr1 = dbregs->dr[1]; 2260 pcb->pcb_dr2 = dbregs->dr[2]; 2261 pcb->pcb_dr3 = dbregs->dr[3]; 2262 pcb->pcb_dr6 = dbregs->dr[6]; 2263 pcb->pcb_dr7 = dbregs->dr[7]; 2264 2265 pcb->pcb_flags |= PCB_DBREGS; 2266 } 2267 2268 return (0); 2269} 2270 2271void 2272reset_dbregs(void) 2273{ 2274 2275 load_dr7(0); /* Turn off the control bits first */ 2276 load_dr0(0); 2277 load_dr1(0); 2278 load_dr2(0); 2279 load_dr3(0); 2280 load_dr6(0); 2281} 2282 2283/* 2284 * Return > 0 if a hardware breakpoint has been hit, and the 2285 * breakpoint was in user space. Return 0, otherwise. 2286 */ 2287int 2288user_dbreg_trap(void) 2289{ 2290 u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */ 2291 u_int64_t bp; /* breakpoint bits extracted from dr6 */ 2292 int nbp; /* number of breakpoints that triggered */ 2293 caddr_t addr[4]; /* breakpoint addresses */ 2294 int i; 2295 2296 dr7 = rdr7(); 2297 if ((dr7 & 0x000000ff) == 0) { 2298 /* 2299 * all GE and LE bits in the dr7 register are zero, 2300 * thus the trap couldn't have been caused by the 2301 * hardware debug registers 2302 */ 2303 return 0; 2304 } 2305 2306 nbp = 0; 2307 dr6 = rdr6(); 2308 bp = dr6 & 0x0000000f; 2309 2310 if (!bp) { 2311 /* 2312 * None of the breakpoint bits are set meaning this 2313 * trap was not caused by any of the debug registers 2314 */ 2315 return 0; 2316 } 2317 2318 /* 2319 * at least one of the breakpoints were hit, check to see 2320 * which ones and if any of them are user space addresses 2321 */ 2322 2323 if (bp & 0x01) { 2324 addr[nbp++] = (caddr_t)rdr0(); 2325 } 2326 if (bp & 0x02) { 2327 addr[nbp++] = (caddr_t)rdr1(); 2328 } 2329 if (bp & 0x04) { 2330 addr[nbp++] = (caddr_t)rdr2(); 2331 } 2332 if (bp & 0x08) { 2333 addr[nbp++] = (caddr_t)rdr3(); 2334 } 2335 2336 for (i = 0; i < nbp; i++) { 2337 if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { 2338 /* 2339 * addr[i] is in user space 2340 */ 2341 return nbp; 2342 } 2343 } 2344 2345 /* 2346 * None of the breakpoints are in user space. 2347 */ 2348 return 0; 2349} 2350 2351#ifdef KDB 2352 2353/* 2354 * Provide inb() and outb() as functions. They are normally only available as 2355 * inline functions, thus cannot be called from the debugger. 2356 */ 2357 2358/* silence compiler warnings */ 2359u_char inb_(u_short); 2360void outb_(u_short, u_char); 2361 2362u_char 2363inb_(u_short port) 2364{ 2365 return inb(port); 2366} 2367 2368void 2369outb_(u_short port, u_char data) 2370{ 2371 outb(port, data); 2372} 2373 2374#endif /* KDB */ 2375