bootinfo.c revision 344403
1/*-
2 * Copyright (c) 1998 Michael Smith <msmith@freebsd.org>
3 * Copyright (c) 2004, 2006 Marcel Moolenaar
4 * Copyright (c) 2014 The FreeBSD Foundation
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 *    notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in the
14 *    documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29#include <sys/cdefs.h>
30__FBSDID("$FreeBSD: stable/11/stand/efi/loader/bootinfo.c 344403 2019-02-21 02:28:04Z kevans $");
31
32#include <stand.h>
33#include <string.h>
34#include <sys/param.h>
35#include <sys/linker.h>
36#include <sys/reboot.h>
37#include <sys/boot.h>
38#include <machine/cpufunc.h>
39#include <machine/elf.h>
40#include <machine/metadata.h>
41#include <machine/psl.h>
42
43#include <efi.h>
44#include <efilib.h>
45
46#include "bootstrap.h"
47#include "loader_efi.h"
48
49#if defined(__amd64__)
50#include <machine/specialreg.h>
51#endif
52
53#include "framebuffer.h"
54
55#if defined(LOADER_FDT_SUPPORT)
56#include <fdt_platform.h>
57#endif
58
59#ifdef LOADER_GELI_SUPPORT
60#include "geliboot.h"
61#endif
62
63int bi_load(char *args, vm_offset_t *modulep, vm_offset_t *kernendp);
64
65extern EFI_SYSTEM_TABLE	*ST;
66
67static int
68bi_getboothowto(char *kargs)
69{
70	const char *sw, *tmp;
71	char *opts;
72	char *console;
73	int howto, speed, port;
74	char buf[50];
75
76	howto = boot_parse_cmdline(kargs);
77	howto |= boot_env_to_howto();
78
79	console = getenv("console");
80	if (console != NULL) {
81		if (strcmp(console, "comconsole") == 0)
82			howto |= RB_SERIAL;
83		if (strcmp(console, "nullconsole") == 0)
84			howto |= RB_MUTE;
85		if (strcmp(console, "efi") == 0) {
86			/*
87			 * If we found a com port and com speed, we need to tell
88			 * the kernel where the serial port is, and how
89			 * fast. Ideally, we'd get the port from ACPI, but that
90			 * isn't running in the loader. Do the next best thing
91			 * by allowing it to be set by a loader.conf variable,
92			 * either a EFI specific one, or the compatible
93			 * comconsole_port if not. PCI support is needed, but
94			 * for that we'd ideally refactor the
95			 * libi386/comconsole.c code to have identical behavior.
96			 */
97			tmp = getenv("efi_com_speed");
98			if (tmp != NULL) {
99				speed = strtol(tmp, NULL, 0);
100				tmp = getenv("efi_com_port");
101				if (tmp == NULL)
102					tmp = getenv("comconsole_port");
103				/* XXX fallback to EFI variable set in rc.d? */
104				if (tmp != NULL)
105					port = strtol(tmp, NULL, 0);
106				else
107					port = 0x3f8;
108				snprintf(buf, sizeof(buf), "io:%d,br:%d", port,
109				    speed);
110				env_setenv("hw.uart.console", EV_VOLATILE, buf,
111				    NULL, NULL);
112			}
113		}
114	}
115
116	return (howto);
117}
118
119/*
120 * Copy the environment into the load area starting at (addr).
121 * Each variable is formatted as <name>=<value>, with a single nul
122 * separating each variable, and a double nul terminating the environment.
123 */
124static vm_offset_t
125bi_copyenv(vm_offset_t start)
126{
127	struct env_var *ep;
128	vm_offset_t addr, last;
129	size_t len;
130
131	addr = last = start;
132
133	/* Traverse the environment. */
134	for (ep = environ; ep != NULL; ep = ep->ev_next) {
135		len = strlen(ep->ev_name);
136		if ((size_t)archsw.arch_copyin(ep->ev_name, addr, len) != len)
137			break;
138		addr += len;
139		if (archsw.arch_copyin("=", addr, 1) != 1)
140			break;
141		addr++;
142		if (ep->ev_value != NULL) {
143			len = strlen(ep->ev_value);
144			if ((size_t)archsw.arch_copyin(ep->ev_value, addr, len) != len)
145				break;
146			addr += len;
147		}
148		if (archsw.arch_copyin("", addr, 1) != 1)
149			break;
150		last = ++addr;
151	}
152
153	if (archsw.arch_copyin("", last++, 1) != 1)
154		last = start;
155	return(last);
156}
157
158/*
159 * Copy module-related data into the load area, where it can be
160 * used as a directory for loaded modules.
161 *
162 * Module data is presented in a self-describing format.  Each datum
163 * is preceded by a 32-bit identifier and a 32-bit size field.
164 *
165 * Currently, the following data are saved:
166 *
167 * MOD_NAME	(variable)		module name (string)
168 * MOD_TYPE	(variable)		module type (string)
169 * MOD_ARGS	(variable)		module parameters (string)
170 * MOD_ADDR	sizeof(vm_offset_t)	module load address
171 * MOD_SIZE	sizeof(size_t)		module size
172 * MOD_METADATA	(variable)		type-specific metadata
173 */
174#define	COPY32(v, a, c) {					\
175	uint32_t x = (v);					\
176	if (c)							\
177		archsw.arch_copyin(&x, a, sizeof(x));		\
178	a += sizeof(x);						\
179}
180
181#define	MOD_STR(t, a, s, c) {					\
182	COPY32(t, a, c);					\
183	COPY32(strlen(s) + 1, a, c);				\
184	if (c)							\
185		archsw.arch_copyin(s, a, strlen(s) + 1);	\
186	a += roundup(strlen(s) + 1, sizeof(u_long));		\
187}
188
189#define	MOD_NAME(a, s, c)	MOD_STR(MODINFO_NAME, a, s, c)
190#define	MOD_TYPE(a, s, c)	MOD_STR(MODINFO_TYPE, a, s, c)
191#define	MOD_ARGS(a, s, c)	MOD_STR(MODINFO_ARGS, a, s, c)
192
193#define	MOD_VAR(t, a, s, c) {					\
194	COPY32(t, a, c);					\
195	COPY32(sizeof(s), a, c);				\
196	if (c)							\
197		archsw.arch_copyin(&s, a, sizeof(s));		\
198	a += roundup(sizeof(s), sizeof(u_long));		\
199}
200
201#define	MOD_ADDR(a, s, c)	MOD_VAR(MODINFO_ADDR, a, s, c)
202#define	MOD_SIZE(a, s, c)	MOD_VAR(MODINFO_SIZE, a, s, c)
203
204#define	MOD_METADATA(a, mm, c) {				\
205	COPY32(MODINFO_METADATA | mm->md_type, a, c);		\
206	COPY32(mm->md_size, a, c);				\
207	if (c)							\
208		archsw.arch_copyin(mm->md_data, a, mm->md_size);	\
209	a += roundup(mm->md_size, sizeof(u_long));		\
210}
211
212#define	MOD_END(a, c) {						\
213	COPY32(MODINFO_END, a, c);				\
214	COPY32(0, a, c);					\
215}
216
217static vm_offset_t
218bi_copymodules(vm_offset_t addr)
219{
220	struct preloaded_file *fp;
221	struct file_metadata *md;
222	int c;
223	uint64_t v;
224
225	c = addr != 0;
226	/* Start with the first module on the list, should be the kernel. */
227	for (fp = file_findfile(NULL, NULL); fp != NULL; fp = fp->f_next) {
228		MOD_NAME(addr, fp->f_name, c); /* This must come first. */
229		MOD_TYPE(addr, fp->f_type, c);
230		if (fp->f_args)
231			MOD_ARGS(addr, fp->f_args, c);
232		v = fp->f_addr;
233#if defined(__arm__)
234		v -= __elfN(relocation_offset);
235#endif
236		MOD_ADDR(addr, v, c);
237		v = fp->f_size;
238		MOD_SIZE(addr, v, c);
239		for (md = fp->f_metadata; md != NULL; md = md->md_next)
240			if (!(md->md_type & MODINFOMD_NOCOPY))
241				MOD_METADATA(addr, md, c);
242	}
243	MOD_END(addr, c);
244	return(addr);
245}
246
247static EFI_STATUS
248efi_do_vmap(EFI_MEMORY_DESCRIPTOR *mm, UINTN sz, UINTN mmsz, UINT32 mmver)
249{
250	EFI_MEMORY_DESCRIPTOR *desc, *viter, *vmap;
251	EFI_STATUS ret;
252	int curr, ndesc, nset;
253
254	nset = 0;
255	desc = mm;
256	ndesc = sz / mmsz;
257	vmap = malloc(sz);
258	if (vmap == NULL)
259		/* This isn't really an EFI error case, but pretend it is */
260		return (EFI_OUT_OF_RESOURCES);
261	viter = vmap;
262	for (curr = 0; curr < ndesc;
263	    curr++, desc = NextMemoryDescriptor(desc, mmsz)) {
264		if ((desc->Attribute & EFI_MEMORY_RUNTIME) != 0) {
265			++nset;
266			desc->VirtualStart = desc->PhysicalStart;
267			*viter = *desc;
268			viter = NextMemoryDescriptor(viter, mmsz);
269		}
270	}
271	ret = RS->SetVirtualAddressMap(nset * mmsz, mmsz, mmver, vmap);
272	free(vmap);
273	return (ret);
274}
275
276static int
277bi_load_efi_data(struct preloaded_file *kfp)
278{
279	EFI_MEMORY_DESCRIPTOR *mm;
280	EFI_PHYSICAL_ADDRESS addr;
281	EFI_STATUS status;
282	const char *efi_novmap;
283	size_t efisz;
284	UINTN efi_mapkey;
285	UINTN mmsz, pages, retry, sz;
286	UINT32 mmver;
287	struct efi_map_header *efihdr;
288	bool do_vmap;
289
290#if defined(__amd64__) || defined(__aarch64__)
291	struct efi_fb efifb;
292
293	if (efi_find_framebuffer(&efifb) == 0) {
294		printf("EFI framebuffer information:\n");
295		printf("addr, size     0x%jx, 0x%jx\n", efifb.fb_addr,
296		    efifb.fb_size);
297		printf("dimensions     %d x %d\n", efifb.fb_width,
298		    efifb.fb_height);
299		printf("stride         %d\n", efifb.fb_stride);
300		printf("masks          0x%08x, 0x%08x, 0x%08x, 0x%08x\n",
301		    efifb.fb_mask_red, efifb.fb_mask_green, efifb.fb_mask_blue,
302		    efifb.fb_mask_reserved);
303
304		file_addmetadata(kfp, MODINFOMD_EFI_FB, sizeof(efifb), &efifb);
305	}
306#endif
307
308	do_vmap = true;
309	efi_novmap = getenv("efi_disable_vmap");
310	if (efi_novmap != NULL)
311		do_vmap = strcasecmp(efi_novmap, "YES") != 0;
312
313	efisz = (sizeof(struct efi_map_header) + 0xf) & ~0xf;
314
315	/*
316	 * Assgin size of EFI_MEMORY_DESCRIPTOR to keep compatible with
317	 * u-boot which doesn't fill this value when buffer for memory
318	 * descriptors is too small (eg. 0 to obtain memory map size)
319	 */
320	mmsz = sizeof(EFI_MEMORY_DESCRIPTOR);
321
322	/*
323	 * It is possible that the first call to ExitBootServices may change
324	 * the map key. Fetch a new map key and retry ExitBootServices in that
325	 * case.
326	 */
327	for (retry = 2; retry > 0; retry--) {
328		/*
329		 * Allocate enough pages to hold the bootinfo block and the
330		 * memory map EFI will return to us. The memory map has an
331		 * unknown size, so we have to determine that first. Note that
332		 * the AllocatePages call can itself modify the memory map, so
333		 * we have to take that into account as well. The changes to
334		 * the memory map are caused by splitting a range of free
335		 * memory into two (AFAICT), so that one is marked as being
336		 * loader data.
337		 */
338		sz = 0;
339		BS->GetMemoryMap(&sz, NULL, &efi_mapkey, &mmsz, &mmver);
340		sz += mmsz;
341		sz = (sz + 0xf) & ~0xf;
342		pages = EFI_SIZE_TO_PAGES(sz + efisz);
343		status = BS->AllocatePages(AllocateAnyPages, EfiLoaderData,
344		     pages, &addr);
345		if (EFI_ERROR(status)) {
346			printf("%s: AllocatePages error %lu\n", __func__,
347			    EFI_ERROR_CODE(status));
348			return (ENOMEM);
349		}
350
351		/*
352		 * Read the memory map and stash it after bootinfo. Align the
353		 * memory map on a 16-byte boundary (the bootinfo block is page
354		 * aligned).
355		 */
356		efihdr = (struct efi_map_header *)(uintptr_t)addr;
357		mm = (void *)((uint8_t *)efihdr + efisz);
358		sz = (EFI_PAGE_SIZE * pages) - efisz;
359
360		status = BS->GetMemoryMap(&sz, mm, &efi_mapkey, &mmsz, &mmver);
361		if (EFI_ERROR(status)) {
362			printf("%s: GetMemoryMap error %lu\n", __func__,
363			    EFI_ERROR_CODE(status));
364			return (EINVAL);
365		}
366		status = BS->ExitBootServices(IH, efi_mapkey);
367		if (EFI_ERROR(status) == 0) {
368			/*
369			 * This may be disabled by setting efi_disable_vmap in
370			 * loader.conf(5). By default we will setup the virtual
371			 * map entries.
372			 */
373			if (do_vmap)
374				efi_do_vmap(mm, sz, mmsz, mmver);
375			efihdr->memory_size = sz;
376			efihdr->descriptor_size = mmsz;
377			efihdr->descriptor_version = mmver;
378			file_addmetadata(kfp, MODINFOMD_EFI_MAP, efisz + sz,
379			    efihdr);
380			return (0);
381		}
382		BS->FreePages(addr, pages);
383	}
384	printf("ExitBootServices error %lu\n", EFI_ERROR_CODE(status));
385	return (EINVAL);
386}
387
388/*
389 * Load the information expected by an amd64 kernel.
390 *
391 * - The 'boothowto' argument is constructed.
392 * - The 'bootdev' argument is constructed.
393 * - The 'bootinfo' struct is constructed, and copied into the kernel space.
394 * - The kernel environment is copied into kernel space.
395 * - Module metadata are formatted and placed in kernel space.
396 */
397int
398bi_load(char *args, vm_offset_t *modulep, vm_offset_t *kernendp)
399{
400	struct preloaded_file *xp, *kfp;
401	struct devdesc *rootdev;
402	struct file_metadata *md;
403	vm_offset_t addr;
404	uint64_t kernend;
405	uint64_t envp;
406	vm_offset_t size;
407	char *rootdevname;
408	int howto;
409#if defined(LOADER_FDT_SUPPORT)
410	vm_offset_t dtbp;
411	int dtb_size;
412#endif
413#if defined(__arm__)
414	vm_offset_t vaddr;
415	size_t i;
416	/*
417	 * These metadata addreses must be converted for kernel after
418	 * relocation.
419	 */
420	uint32_t		mdt[] = {
421	    MODINFOMD_SSYM, MODINFOMD_ESYM, MODINFOMD_KERNEND,
422	    MODINFOMD_ENVP,
423#if defined(LOADER_FDT_SUPPORT)
424	    MODINFOMD_DTBP
425#endif
426	};
427#endif
428
429	howto = bi_getboothowto(args);
430
431	/*
432	 * Allow the environment variable 'rootdev' to override the supplied
433	 * device. This should perhaps go to MI code and/or have $rootdev
434	 * tested/set by MI code before launching the kernel.
435	 */
436	rootdevname = getenv("rootdev");
437	archsw.arch_getdev((void**)(&rootdev), rootdevname, NULL);
438	if (rootdev == NULL) {
439		printf("Can't determine root device.\n");
440		return(EINVAL);
441	}
442
443	/* Try reading the /etc/fstab file to select the root device */
444	getrootmount(efi_fmtdev((void *)rootdev));
445
446	addr = 0;
447	for (xp = file_findfile(NULL, NULL); xp != NULL; xp = xp->f_next) {
448		if (addr < (xp->f_addr + xp->f_size))
449			addr = xp->f_addr + xp->f_size;
450	}
451
452	/* Pad to a page boundary. */
453	addr = roundup(addr, PAGE_SIZE);
454
455	/* Copy our environment. */
456	envp = addr;
457	addr = bi_copyenv(addr);
458
459	/* Pad to a page boundary. */
460	addr = roundup(addr, PAGE_SIZE);
461
462#if defined(LOADER_FDT_SUPPORT)
463	/* Handle device tree blob */
464	dtbp = addr;
465	dtb_size = fdt_copy(addr);
466
467	/* Pad to a page boundary */
468	if (dtb_size)
469		addr += roundup(dtb_size, PAGE_SIZE);
470#endif
471
472	kfp = file_findfile(NULL, "elf kernel");
473	if (kfp == NULL)
474		kfp = file_findfile(NULL, "elf64 kernel");
475	if (kfp == NULL)
476		panic("can't find kernel file");
477	kernend = 0;	/* fill it in later */
478	file_addmetadata(kfp, MODINFOMD_HOWTO, sizeof howto, &howto);
479	file_addmetadata(kfp, MODINFOMD_ENVP, sizeof envp, &envp);
480#if defined(LOADER_FDT_SUPPORT)
481	if (dtb_size)
482		file_addmetadata(kfp, MODINFOMD_DTBP, sizeof dtbp, &dtbp);
483	else
484		printf("WARNING! Trying to fire up the kernel, but no "
485		    "device tree blob found!\n");
486#endif
487	file_addmetadata(kfp, MODINFOMD_KERNEND, sizeof kernend, &kernend);
488	file_addmetadata(kfp, MODINFOMD_FW_HANDLE, sizeof ST, &ST);
489#ifdef LOADER_GELI_SUPPORT
490	geli_export_key_metadata(kfp);
491#endif
492	bi_load_efi_data(kfp);
493
494	/* Figure out the size and location of the metadata. */
495	*modulep = addr;
496	size = bi_copymodules(0);
497	kernend = roundup(addr + size, PAGE_SIZE);
498	*kernendp = kernend;
499
500	/* patch MODINFOMD_KERNEND */
501	md = file_findmetadata(kfp, MODINFOMD_KERNEND);
502	bcopy(&kernend, md->md_data, sizeof kernend);
503
504#if defined(__arm__)
505	*modulep -= __elfN(relocation_offset);
506
507	/* Do relocation fixup on metadata of each module. */
508	for (xp = file_findfile(NULL, NULL); xp != NULL; xp = xp->f_next) {
509		for (i = 0; i < nitems(mdt); i++) {
510			md = file_findmetadata(xp, mdt[i]);
511			if (md) {
512				bcopy(md->md_data, &vaddr, sizeof vaddr);
513				vaddr -= __elfN(relocation_offset);
514				bcopy(&vaddr, md->md_data, sizeof vaddr);
515			}
516		}
517	}
518#endif
519
520	/* Copy module list and metadata. */
521	(void)bi_copymodules(addr);
522
523	return (0);
524}
525