bootptab.mcs revision 13572 
1# /etc/bootptab: database for bootp server (/etc/bootpd)
2# Last update: gwr, Sun Dec 12 19:00:00 EDT 1993
3# Blank lines and lines beginning with '#' are ignored.
4#
5# Legend:	(see bootptab.5)
6#	first field -- hostname (not indented)
7#	bf -- bootfile
8#	bs -- bootfile size in 512-octet blocks
9#	cs -- cookie servers
10#	df -- dump file name
11#	dn -- domain name
12#	ds -- domain name servers
13#	ef -- extension file
14#	gw -- gateways
15#	ha -- hardware address
16#	hd -- home directory for bootfiles
17#	hn -- host name set for client
18#	ht -- hardware type
19#	im -- impress servers
20#	ip -- host IP address
21#	lg -- log servers
22#	lp -- LPR servers
23#	ns -- IEN-116 name servers
24#	ra -- reply address
25#	rl -- resource location protocol servers
26#	rp -- root path
27#	sa -- boot server address
28#	sm -- subnet mask
29#	sw -- swap server
30#	tc -- template host (points to similar host entry)
31#	td -- TFTP directory
32#	to -- time offset (seconds)
33#	ts -- time servers
34#	vm -- vendor magic number
35#	Tn -- generic option tag n
36#
37# Be careful about including backslashes where they're needed.  Weird (bad)
38# things can happen when a backslash is omitted where one is intended.
39# Also, note that generic option data must be either a string or a
40# sequence of bytes where each byte is a two-digit hex value.
41
42# First, we define a global entry which specifies the stuff every host uses.
43
44# If you leave "td" empty, run bootpd with the "-c /tftpboot" switch
45# so path names (boot files) will be interpreted relative to the same
46# directory as tftpd will use when opening files.
47.default:\
48	:hn:dn="mc.com":\
49	:td=/tftpboot:\
50	:ds=merlin, jericho:\
51	:to=auto:
52
53# Next, we can define different master entries for each subnet. . .
54
55.subnet16:\
56	:tc=.default:\
57	:sm=255.255.255.0:\
58	:gw=merlin:\
59	:sa=merlin:
60
61.subnet17:\
62	:tc=.default:\
63	:sm=255.255.255.0:\
64	:gw=merlin-gw:\
65	:sa=merlin-gw:
66
67#
68# We should be able to use as many levels of indirection as desired.  Use
69# your imagination. . .
70#
71
72# Individual entries (could also have different servers for some/all of these
73# hosts, but we don't really use this feature at CMU):
74
75# Emulex terminal server
76emulex:	tc=.subnet16:ha=00.00.C9.00.42.E0:bf=P4KTL0E:
77
78# Lantronix eps1
79eps1:	tc=.subnet16:ha=00.80.A3.04.1D.78:
80
81# Tadpole 885 board.
82tp885:  tc=.subnet17:ha=08.00.4C.00.2F.74:bf=tp885sys2.cfe:
83
84# MVME147 VxWorks board.
85#mvme147:tc=.subnet17:ha=08.00.3e.20.da.47:bf=mv147vxw.st:
86
87# These are just for testing
88bach:  tc=.subnet16:ha="08:00:20:04:98:8d":bf=boot.sun4m:
89xanadu:tc=.subnet17:ha="00:80:42:42:04:c7":bf=boot.sun4c:
90