opensslconf.h revision 340704 
1/* opensslconf.h */
2/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
3
4#ifdef  __cplusplus
5extern "C" {
6#endif
7/* OpenSSL was configured with the following options: */
8#ifndef OPENSSL_DOING_MAKEDEPEND
9
10
11#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
12# define OPENSSL_NO_EC_NISTP_64_GCC_128
13#endif
14#ifndef OPENSSL_NO_GMP
15# define OPENSSL_NO_GMP
16#endif
17#ifndef OPENSSL_NO_JPAKE
18# define OPENSSL_NO_JPAKE
19#endif
20#ifndef OPENSSL_NO_KRB5
21# define OPENSSL_NO_KRB5
22#endif
23#ifndef OPENSSL_NO_LIBUNBOUND
24# define OPENSSL_NO_LIBUNBOUND
25#endif
26#ifndef OPENSSL_NO_MD2
27# define OPENSSL_NO_MD2
28#endif
29#ifndef OPENSSL_NO_RC5
30# define OPENSSL_NO_RC5
31#endif
32#ifndef OPENSSL_NO_RFC3779
33# define OPENSSL_NO_RFC3779
34#endif
35#ifndef OPENSSL_NO_SCTP
36# define OPENSSL_NO_SCTP
37#endif
38#ifndef OPENSSL_NO_SSL_TRACE
39# define OPENSSL_NO_SSL_TRACE
40#endif
41#ifndef OPENSSL_NO_SSL2
42# define OPENSSL_NO_SSL2
43#endif
44#ifndef OPENSSL_NO_STORE
45# define OPENSSL_NO_STORE
46#endif
47#ifndef OPENSSL_NO_UNIT_TEST
48# define OPENSSL_NO_UNIT_TEST
49#endif
50#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS
51# define OPENSSL_NO_WEAK_SSL_CIPHERS
52#endif
53
54#endif /* OPENSSL_DOING_MAKEDEPEND */
55
56#ifndef OPENSSL_THREADS
57# define OPENSSL_THREADS
58#endif
59#ifndef OPENSSL_NO_DYNAMIC_ENGINE
60# define OPENSSL_NO_DYNAMIC_ENGINE
61#endif
62
63/* The OPENSSL_NO_* macros are also defined as NO_* if the application
64   asks for it.  This is a transient feature that is provided for those
65   who haven't had the time to do the appropriate changes in their
66   applications.  */
67#ifdef OPENSSL_ALGORITHM_DEFINES
68# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
69#  define NO_EC_NISTP_64_GCC_128
70# endif
71# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
72#  define NO_GMP
73# endif
74# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
75#  define NO_JPAKE
76# endif
77# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
78#  define NO_KRB5
79# endif
80# if defined(OPENSSL_NO_LIBUNBOUND) && !defined(NO_LIBUNBOUND)
81#  define NO_LIBUNBOUND
82# endif
83# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
84#  define NO_MD2
85# endif
86# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
87#  define NO_RC5
88# endif
89# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
90#  define NO_RFC3779
91# endif
92# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
93#  define NO_SCTP
94# endif
95# if defined(OPENSSL_NO_SSL_TRACE) && !defined(NO_SSL_TRACE)
96#  define NO_SSL_TRACE
97# endif
98# if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2)
99#  define NO_SSL2
100# endif
101# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
102#  define NO_STORE
103# endif
104# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
105#  define NO_UNIT_TEST
106# endif
107# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS)
108#  define NO_WEAK_SSL_CIPHERS
109# endif
110#endif
111
112#define OPENSSL_CPUID_OBJ
113
114/* crypto/opensslconf.h.in */
115
116/* Generate 80386 code? */
117#undef I386_ONLY
118
119#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
120#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
121#define ENGINESDIR "/usr/local/ssl/lib/engines"
122#define OPENSSLDIR "/usr/local/ssl"
123#endif
124#endif
125
126#undef OPENSSL_UNISTD
127#define OPENSSL_UNISTD <unistd.h>
128
129#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
130
131#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
132#define IDEA_INT unsigned int
133#endif
134
135#if defined(HEADER_MD2_H) && !defined(MD2_INT)
136#define MD2_INT unsigned int
137#endif
138
139#if defined(HEADER_RC2_H) && !defined(RC2_INT)
140/* I need to put in a mod for the alpha - eay */
141#define RC2_INT unsigned int
142#endif
143
144#if defined(HEADER_RC4_H)
145#if !defined(RC4_INT)
146/* using int types make the structure larger but make the code faster
147 * on most boxes I have tested - up to %20 faster. */
148/*
149 * I don't know what does "most" mean, but declaring "int" is a must on:
150 * - Intel P6 because partial register stalls are very expensive;
151 * - elder Alpha because it lacks byte load/store instructions;
152 */
153#define RC4_INT unsigned int
154#endif
155#if !defined(RC4_CHUNK)
156/*
157 * This enables code handling data aligned at natural CPU word
158 * boundary. See crypto/rc4/rc4_enc.c for further details.
159 */
160#define RC4_CHUNK unsigned long
161#endif
162#endif
163
164#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
165/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
166 * %20 speed up (longs are 8 bytes, int's are 4). */
167#ifndef DES_LONG
168#define DES_LONG unsigned int
169#endif
170#endif
171
172#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
173#define CONFIG_HEADER_BN_H
174#undef BN_LLONG
175
176/* Should we define BN_DIV2W here? */
177
178/* Only one for the following should be defined */
179#define SIXTY_FOUR_BIT_LONG
180#undef SIXTY_FOUR_BIT
181#undef THIRTY_TWO_BIT
182#endif
183
184#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
185#define CONFIG_HEADER_RC4_LOCL_H
186/* if this is defined data[i] is used instead of *data, this is a %20
187 * speedup on x86 */
188#undef RC4_INDEX
189#endif
190
191#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
192#define CONFIG_HEADER_BF_LOCL_H
193#undef BF_PTR
194#endif /* HEADER_BF_LOCL_H */
195
196#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
197#define CONFIG_HEADER_DES_LOCL_H
198#ifndef DES_DEFAULT_OPTIONS
199/* the following is tweaked from a config script, that is why it is a
200 * protected undef/define */
201#ifndef DES_PTR
202#undef DES_PTR
203#endif
204
205/* This helps C compiler generate the correct code for multiple functional
206 * units.  It reduces register dependancies at the expense of 2 more
207 * registers */
208#ifndef DES_RISC1
209#undef DES_RISC1
210#endif
211
212#ifndef DES_RISC2
213#undef DES_RISC2
214#endif
215
216#if defined(DES_RISC1) && defined(DES_RISC2)
217#error YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
218#endif
219
220/* Unroll the inner loop, this sometimes helps, sometimes hinders.
221 * Very mucy CPU dependant */
222#ifndef DES_UNROLL
223#define DES_UNROLL
224#endif
225
226/* These default values were supplied by
227 * Peter Gutman <pgut001@cs.auckland.ac.nz>
228 * They are only used if nothing else has been defined */
229#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
230/* Special defines which change the way the code is built depending on the
231   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
232   even newer MIPS CPU's, but at the moment one size fits all for
233   optimization options.  Older Sparc's work better with only UNROLL, but
234   there's no way to tell at compile time what it is you're running on */
235
236#if defined( __sun ) || defined ( sun )		/* Newer Sparc's */
237#  define DES_PTR
238#  define DES_RISC1
239#  define DES_UNROLL
240#elif defined( __ultrix )	/* Older MIPS */
241#  define DES_PTR
242#  define DES_RISC2
243#  define DES_UNROLL
244#elif defined( __osf1__ )	/* Alpha */
245#  define DES_PTR
246#  define DES_RISC2
247#elif defined ( _AIX )		/* RS6000 */
248  /* Unknown */
249#elif defined( __hpux )		/* HP-PA */
250  /* Unknown */
251#elif defined( __aux )		/* 68K */
252  /* Unknown */
253#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
254#  define DES_UNROLL
255#elif defined( __sgi )		/* Newer MIPS */
256#  define DES_PTR
257#  define DES_RISC2
258#  define DES_UNROLL
259#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
260#  define DES_PTR
261#  define DES_RISC1
262#  define DES_UNROLL
263#endif /* Systems-specific speed defines */
264#endif
265
266#endif /* DES_DEFAULT_OPTIONS */
267#endif /* HEADER_DES_LOCL_H */
268#ifdef  __cplusplus
269}
270#endif
271