config revision 111147
1#!/bin/sh 2# 3# OpenSSL config: determine the operating system and run ./Configure 4# 5# "config -h" for usage information. 6# 7# this is a merge of minarch and GuessOS from the Apache Group. 8# Originally written by Tim Hudson <tjh@cryptsoft.com>. 9 10# Original Apache Group comments on GuessOS 11 12# Simple OS/Platform guesser. Similar to config.guess but 13# much, much smaller. Since it was developed for use with 14# Apache, it follows under Apache's regular licensing 15# with one specific addition: Any changes or additions 16# to this script should be Emailed to the Apache 17# group (apache@apache.org) in general and to 18# Jim Jagielski (jim@jaguNET.com) in specific. 19# 20# Be as similar to the output of config.guess/config.sub 21# as possible. 22 23PREFIX="" 24SUFFIX="" 25TEST="false" 26 27# pick up any command line args to config 28for i 29do 30case "$i" in 31-d*) PREFIX="debug-";; 32-t*) TEST="true";; 33-h*) TEST="true"; cat <<EOF 34Usage: config [options] 35 -d Add a debug- prefix to machine choice. 36 -t Test mode, do not run the Configure perl script. 37 -h This help. 38 39Any other text will be passed to the Configure perl script. 40See INSTALL for instructions. 41 42EOF 43;; 44*) options=$options" $i" ;; 45esac 46done 47 48# First get uname entries that we use below 49 50MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 51RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 52SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 53VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 54 55 56# Now test for ISC and SCO, since it is has a braindamaged uname. 57# 58# We need to work around FreeBSD 1.1.5.1 59( 60XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 61if [ "x$XREL" != "x" ]; then 62 if [ -f /etc/kconfig ]; then 63 case "$XREL" in 64 4.0|4.1) 65 echo "${MACHINE}-whatever-isc4"; exit 0 66 ;; 67 esac 68 else 69 case "$XREL" in 70 3.2v4.2) 71 echo "whatever-whatever-sco3"; exit 0 72 ;; 73 3.2v5.0*) 74 echo "whatever-whatever-sco5"; exit 0 75 ;; 76 4.2MP) 77 case "x${VERSION}" in 78 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; 79 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; 80 x2*) echo "whatever-whatever-unixware2"; exit 0 ;; 81 esac 82 ;; 83 4.2) 84 echo "i386-whatever-unixware1"; exit 0 85 ;; 86 5) 87 case "x${VERSION}" in 88 # We hardcode i586 in place of ${MACHINE} for the 89 # following reason. The catch is that even though Pentium 90 # is minimum requirement for platforms in question, 91 # ${MACHINE} gets always assigned to i386. Now, problem 92 # with i386 is that it makes ./config pass 386 to 93 # ./Configure, which in turn makes make generate 94 # inefficient SHA-1 (for this moment) code. 95 x7*) echo "i586-sco-unixware7"; exit 0 ;; 96 x8*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;; 97 esac 98 ;; 99 esac 100 fi 101fi 102# Now we simply scan though... In most cases, the SYSTEM info is enough 103# 104case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 105 MPE/iX:*) 106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` 107 echo "parisc-hp-MPE/iX"; exit 0 108 ;; 109 A/UX:*) 110 echo "m68k-apple-aux3"; exit 0 111 ;; 112 113 AIX:[3456789]:4:*) 114 echo "${MACHINE}-ibm-aix43"; exit 0 115 ;; 116 117 AIX:*:[56789]:*) 118 echo "${MACHINE}-ibm-aix43"; exit 0 119 ;; 120 121 AIX:*) 122 echo "${MACHINE}-ibm-aix"; exit 0 123 ;; 124 125 dgux:*) 126 echo "${MACHINE}-dg-dgux"; exit 0 127 ;; 128 129 HI-UX:*) 130 echo "${MACHINE}-hi-hiux"; exit 0 131 ;; 132 133 HP-UX:*) 134 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 135 case "$HPUXVER" in 136 1[0-9].*) # HPUX 10 and 11 targets are unified 137 echo "${MACHINE}-hp-hpux10"; exit 0 138 ;; 139 *) 140 echo "${MACHINE}-hp-hpux"; exit 0 141 ;; 142 esac 143 ;; 144 145 IRIX:5.*) 146 echo "mips2-sgi-irix"; exit 0 147 ;; 148 149 IRIX:6.*) 150 echo "mips3-sgi-irix"; exit 0 151 ;; 152 153 IRIX64:*) 154 echo "mips4-sgi-irix64"; exit 0 155 ;; 156 157 Linux:[2-9].*) 158 echo "${MACHINE}-whatever-linux2"; exit 0 159 ;; 160 161 Linux:1.*) 162 echo "${MACHINE}-whatever-linux1"; exit 0 163 ;; 164 165 GNU*) 166 echo "hurd-x86"; exit 0; 167 ;; 168 169 LynxOS:*) 170 echo "${MACHINE}-lynx-lynxos"; exit 0 171 ;; 172 173 BSD/OS:4.*) # BSD/OS always says 386 174 echo "i486-whatever-bsdi4"; exit 0 175 ;; 176 177 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 178 case `/sbin/sysctl -n hw.model` in 179 Pentium*) 180 echo "i586-whatever-bsdi"; exit 0 181 ;; 182 *) 183 echo "i386-whatever-bsdi"; exit 0 184 ;; 185 esac; 186 ;; 187 188 BSD/386:*|BSD/OS:*) 189 echo "${MACHINE}-whatever-bsdi"; exit 0 190 ;; 191 192 FreeBSD:*:*:*386*) 193 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 194 MACH=`sysctl -n hw.model` 195 ARCH='whatever' 196 case ${MACH} in 197 *386* ) MACH="i386" ;; 198 *486* ) MACH="i486" ;; 199 Pentium\ II*) MACH="i686" ;; 200 Pentium* ) MACH="i586" ;; 201 * ) MACH="$MACHINE" ;; 202 esac 203 case ${MACH} in 204 i[0-9]86 ) ARCH="pc" ;; 205 esac 206 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 207 ;; 208 209 FreeBSD:*) 210 echo "${MACHINE}-whatever-freebsd"; exit 0 211 ;; 212 213 NetBSD:*:*:*386*) 214 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 215 ;; 216 217 NetBSD:*) 218 echo "${MACHINE}-whatever-netbsd"; exit 0 219 ;; 220 221 OpenBSD:*) 222 echo "${MACHINE}-whatever-openbsd"; exit 0 223 ;; 224 225 OpenUNIX:*) 226 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 227 ;; 228 229 OSF1:*:*:*alpha*) 230 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 231 case "$OSFMAJOR" in 232 4|5) 233 echo "${MACHINE}-dec-tru64"; exit 0 234 ;; 235 1|2|3) 236 echo "${MACHINE}-dec-osf"; exit 0 237 ;; 238 *) 239 echo "${MACHINE}-dec-osf"; exit 0 240 ;; 241 esac 242 ;; 243 244 QNX:*) 245 case "$RELEASE" in 246 4*) 247 echo "${MACHINE}-whatever-qnx4" 248 ;; 249 6*) 250 echo "${MACHINE}-whatever-qnx6" 251 ;; 252 *) 253 echo "${MACHINE}-whatever-qnx" 254 ;; 255 esac 256 exit 0 257 ;; 258 259 Paragon*:*:*:*) 260 echo "i860-intel-osf1"; exit 0 261 ;; 262 263 Rhapsody:*) 264 echo "ppc-apple-rhapsody"; exit 0 265 ;; 266 267 Darwin:*) 268 case "$MACHINE" in 269 Power*) 270 echo "ppc-apple-darwin${VERSION}" 271 ;; 272 *) 273 echo "i386-apple-darwin${VERSION}" 274 ;; 275 esac 276 exit 0 277 ;; 278 279 SunOS:5.*) 280 echo "${MACHINE}-whatever-solaris2"; exit 0 281 ;; 282 283 SunOS:*) 284 echo "${MACHINE}-sun-sunos4"; exit 0 285 ;; 286 287 UNIX_System_V:4.*:*) 288 echo "${MACHINE}-whatever-sysv4"; exit 0 289 ;; 290 291 *:4*:R4*:m88k) 292 echo "${MACHINE}-whatever-sysv4"; exit 0 293 ;; 294 295 DYNIX/ptx:4*:*) 296 echo "${MACHINE}-whatever-sysv4"; exit 0 297 ;; 298 299 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 300 echo "i486-ncr-sysv4"; exit 0 301 ;; 302 303 ULTRIX:*) 304 echo "${MACHINE}-unknown-ultrix"; exit 0 305 ;; 306 307 SINIX*|ReliantUNIX*) 308 echo "${MACHINE}-siemens-sysv4"; exit 0 309 ;; 310 311 POSIX-BC*) 312 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 313 ;; 314 315 machten:*) 316 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 317 ;; 318 319 library:*) 320 echo "${MACHINE}-ncr-sysv4"; exit 0 321 ;; 322 323 ConvexOS:*:11.0:*) 324 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 325 ;; 326 327 NEWS-OS:4.*) 328 echo "mips-sony-newsos4"; exit 0; 329 ;; 330 331 CYGWIN*) 332 case "$RELEASE" in 333 [bB]*|1.0|1.[12].*) 334 echo "${MACHINE}-whatever-cygwin_pre1.3" 335 ;; 336 *) 337 echo "${MACHINE}-whatever-cygwin" 338 ;; 339 esac 340 exit 0 341 ;; 342 343 *"CRAY T3E") 344 echo "t3e-cray-unicosmk"; exit 0; 345 ;; 346 347 *CRAY*) 348 echo "j90-cray-unicos"; exit 0; 349 ;; 350 351 NONSTOP_KERNEL*) 352 echo "nsr-tandem-nsk"; exit 0; 353 ;; 354esac 355 356# 357# Ugg. These are all we can determine by what we know about 358# the output of uname. Be more creative: 359# 360 361# Do the Apollo stuff first. Here, we just simply assume 362# that the existance of the /usr/apollo directory is proof 363# enough 364if [ -d /usr/apollo ]; then 365 echo "whatever-apollo-whatever" 366 exit 0 367fi 368 369# Now NeXT 370ISNEXT=`hostinfo 2>/dev/null` 371case "$ISNEXT" in 372 *'NeXT Mach 3.3'*) 373 echo "whatever-next-nextstep3.3"; exit 0 374 ;; 375 *NeXT*) 376 echo "whatever-next-nextstep"; exit 0 377 ;; 378esac 379 380# At this point we gone through all the one's 381# we know of: Punt 382 383echo "${MACHINE}-whatever-${SYSTEM}" 384exit 0 385) 2>/dev/null | ( 386 387# --------------------------------------------------------------------------- 388# this is where the translation occurs into SSLeay terms 389# --------------------------------------------------------------------------- 390 391# figure out if gcc is available and if so we use it otherwise 392# we fallback to whatever cc does on the system 393GCCVER=`(gcc -dumpversion) 2>/dev/null` 394if [ "$GCCVER" != "" ]; then 395 CC=gcc 396 # then strip off whatever prefix egcs prepends the number with... 397 # Hopefully, this will work for any future prefixes as well. 398 GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'` 399 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion 400 # does give us what we want though, so we use that. We just just the 401 # major and minor version numbers. 402 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 403 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 404else 405 CC=cc 406fi 407GCCVER=${GCCVER:-0} 408if [ "$SYSTEM" = "HP-UX" ];then 409 # By default gcc is a ILP32 compiler (with long long == 64). 410 GCC_BITS="32" 411 if [ $GCCVER -ge 30 ]; then 412 # PA64 support only came in with gcc 3.0.x. 413 # We look for the preprocessor symbol __LP64__ indicating 414 # 64bit bit long and pointer. sizeof(int) == 32 on HPUX64. 415 if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then 416 GCC_BITS="64" 417 fi 418 fi 419fi 420if [ "$SYSTEM" = "SunOS" ]; then 421 if [ $GCCVER -ge 30 ]; then 422 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears 423 # to be working, at the very least 'make test' passes... 424 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then 425 GCC_ARCH="-m64" 426 else 427 GCC_ARCH="-m32" 428 fi 429 fi 430 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 431 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 432 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 433 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 434 CCVER=${CCVER:-0} 435 if [ $CCVER -gt 40 ]; then 436 CC=cc # overrides gcc!!! 437 if [ $CCVER -eq 50 ]; then 438 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 439 echo " patch #107357-01 or later applied." 440 sleep 5 441 fi 442 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then 443 CC=sc3 444 fi 445fi 446 447if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then 448 # check for Compaq C, expected output is "blah-blah C Vx.x" 449 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ 450 egrep -e '.* C V[0-9]\.[0-9]' | \ 451 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` 452 CCCVER=${CCCVER:-0} 453 if [ $CCCVER -gt 60 ]; then 454 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably 455 # only on hash routines and des, otherwise gcc (2.95) 456 # keeps along rather tight... 457 fi 458fi 459 460if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc 461 (cc) 2>&1 | grep -iv "command not found" > /dev/null && CC=cc 462fi 463 464CCVER=${CCVER:-0} 465 466# read the output of the embedded GuessOS 467read GUESSOS 468 469echo Operating system: $GUESSOS 470 471# now map the output into SSLeay terms ... really should hack into the 472# script above so we end up with values in vars but that would take 473# more time that I want to waste at the moment 474case "$GUESSOS" in 475 mips2-sgi-irix) 476 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 477 CPU=${CPU:-0} 478 if [ $CPU -ge 4000 ]; then 479 options="$options -mips2" 480 fi 481 OUT="irix-$CC" 482 ;; 483 mips3-sgi-irix) 484 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 485 CPU=${CPU:-0} 486 if [ $CPU -ge 5000 ]; then 487 options="$options -mips4" 488 else 489 options="$options -mips3" 490 fi 491 OUT="irix-mips3-$CC" 492 ;; 493 mips4-sgi-irix64) 494 echo "WARNING! If you wish to build 64-bit library, then you have to" 495 echo " invoke './Configure irix64-mips4-$CC' *manually*." 496 if [ "$TEST" = "false" ]; then 497 echo " You have about 5 seconds to press Ctrl-C to abort." 498 (stty -icanon min 0 time 50; read waste) < /dev/tty 499 fi 500 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 501 CPU=${CPU:-0} 502 if [ $CPU -ge 5000 ]; then 503 options="$options -mips4" 504 else 505 options="$options -mips3" 506 fi 507 OUT="irix-mips3-$CC" 508 ;; 509 alpha-*-linux2) 510 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo` 511 case ${ISA:-generic} in 512 *[67]) OUT="linux-alpha+bwx-$CC" ;; 513 *) OUT="linux-alpha-$CC" ;; 514 esac 515 if [ "$CC" = "gcc" ]; then 516 case ${ISA:-generic} in 517 EV5|EV45) options="$options -mcpu=ev5";; 518 EV56|PCA56) options="$options -mcpu=ev56";; 519 EV6|EV67|PCA57) options="$options -mcpu=ev6";; 520 esac 521 fi 522 ;; 523 mips-*-linux?) 524 cat >dummy.c <<EOF 525#include <stdio.h> /* for printf() prototype */ 526 int main (argc, argv) int argc; char *argv[]; { 527#ifdef __MIPSEB__ 528 printf ("linux-%s\n", argv[1]); 529#endif 530#ifdef __MIPSEL__ 531 printf ("linux-%sel\n", argv[1]); 532#endif 533 return 0; 534} 535EOF 536 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}` 537 rm dummy dummy.c 538 ;; 539 ppc64-*-linux2) 540 #Use the standard target for PPC architecture until we create a 541 #special one for the 64bit architecture. 542 OUT="linux-ppc" ;; 543 ppc-*-linux2) OUT="linux-ppc" ;; 544 m68k-*-linux*) OUT="linux-m68k" ;; 545 ia64-*-linux?) OUT="linux-ia64" ;; 546 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 547 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;; 548 i386-apple-darwin*) OUT="darwin-i386-cc" ;; 549 sparc64-*-linux2) 550 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" 551 echo " and wish to build 64-bit library, then you have to" 552 echo " invoke './Configure linux64-sparcv9' *manually*." 553 if [ "$TEST" = "false" ]; then 554 echo " You have about 5 seconds to press Ctrl-C to abort." 555 (stty -icanon min 0 time 50; read waste) < /dev/tty 556 fi 557 OUT="linux-sparcv9" ;; 558 sparc-*-linux2) 559 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo` 560 case ${KARCH:-sun4} in 561 sun4u*) OUT="linux-sparcv9" ;; 562 sun4m) OUT="linux-sparcv8" ;; 563 sun4d) OUT="linux-sparcv8" ;; 564 *) OUT="linux-sparcv7" ;; 565 esac ;; 566 parisc-*-linux2) 567 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo` 568 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo` 569 570 # ??TODO ?? Model transformations 571 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 572 # assuming no further arch. identification will ever be used by GCC. 573 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 574 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 575 # for these chips in the future. 576 # PA7300LC -> 7100LC (1.1) 577 # PA8200 -> 8000 (2.0) 578 # PA8500 -> 8000 (2.0) 579 # PA8600 -> 8000 (2.0) 580 581 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'` 582 # Finish Model transformations 583 584 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH" 585 OUT="linux-parisc" ;; 586 arm*-*-linux2) OUT="linux-elf-arm" ;; 587 s390-*-linux2) OUT="linux-s390" ;; 588 s390x-*-linux?) OUT="linux-s390x" ;; 589 x86_64-*-linux?) OUT="linux-x86_64" ;; 590 *-*-linux2) OUT="linux-elf" 591 if [ "$GCCVER" -gt 28 ]; then 592 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then 593 OUT="linux-pentium" 594 fi 595 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then 596 OUT="linux-ppro" 597 fi 598 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then 599 OUT="linux-k6" 600 fi 601 fi ;; 602 *-*-linux1) OUT="linux-aout" ;; 603 sun4u*-*-solaris2) 604 OUT="solaris-sparcv9-$CC" 605 ISA64=`(isalist) 2>/dev/null | grep sparcv9` 606 if [ "$ISA64" != "" ]; then 607 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then 608 echo "WARNING! If you wish to build 64-bit library, then you have to" 609 echo " invoke './Configure solaris64-sparcv9-cc' *manually*." 610 if [ "$TEST" = "false" ]; then 611 echo " You have about 5 seconds to press Ctrl-C to abort." 612 (stty -icanon min 0 time 50; read waste) < /dev/tty 613 fi 614 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then 615 # $GCC_ARCH denotes default ABI chosen by compiler driver 616 # (first one found on the $PATH). I assume that user 617 # expects certain consistency with the rest of his builds 618 # and therefore switch over to 64-bit. <appro> 619 OUT="solaris64-sparcv9-gcc" 620 echo "WARNING! If you wish to build 32-bit library, then you have to" 621 echo " invoke './Configure solaris-sparcv9-gcc' *manually*." 622 if [ "$TEST" = "false" ]; then 623 echo " You have about 5 seconds to press Ctrl-C to abort." 624 (stty -icanon min 0 time 50; read waste) < /dev/tty 625 fi 626 elif [ "$GCC_ARCH" = "-m32" ]; then 627 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" 628 echo " and wish to build 64-bit library, then you have to" 629 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." 630 if [ "$TEST" = "false" ]; then 631 echo " You have about 5 seconds to press Ctrl-C to abort." 632 (stty -icanon min 0 time 50; read waste) < /dev/tty 633 fi 634 fi 635 fi 636 ;; 637 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 638 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 639 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 640 *86*-*-solaris2) OUT="solaris-x86-$CC" ;; 641 *-*-sunos4) OUT="sunos-$CC" ;; 642 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;; 643 sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;; 644 ia64-*-freebsd*) OUT="FreeBSD-ia64" ;; 645 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;; 646 *-freebsd[1-2]*) OUT="FreeBSD" ;; 647 *86*-*-netbsd) OUT="NetBSD-x86" ;; 648 sun3*-*-netbsd) OUT="NetBSD-m68" ;; 649 *-*-netbsd) OUT="NetBSD-sparc" ;; 650 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;; 651 *86*-*-openbsd) OUT="OpenBSD-i386" ;; 652 m68k*-*-openbsd) OUT="OpenBSD-m68k" ;; 653 m88k*-*-openbsd) OUT="OpenBSD-m88k" ;; 654 mips*-*-openbsd) OUT="OpenBSD-mips" ;; 655 pmax*-*-openbsd) OUT="OpenBSD-mips" ;; 656 powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;; 657 sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;; 658 sparc*-*-openbsd) OUT="OpenBSD-sparc" ;; 659 vax*-*-openbsd) OUT="OpenBSD-vax" ;; 660 hppa*-*-openbsd) OUT="OpenBSD-hppa" ;; 661 *-*-openbsd) OUT="OpenBSD" ;; 662 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;; 663 *-*-osf) OUT="alphaold-cc" ;; 664 *-*-tru64) OUT="alpha-cc" ;; 665 *-*-OpenUNIX*) 666 if [ "$CC" = "gcc" ]; then 667 OUT="OpenUNIX-8-gcc" 668 else 669 OUT="OpenUNIX-8" 670 fi 671 ;; 672 *-*-unixware7) OUT="unixware-7" ;; 673 *-*-UnixWare7) OUT="unixware-7" ;; 674 *-*-Unixware7) OUT="unixware-7" ;; 675 *-*-unixware20*) OUT="unixware-2.0" ;; 676 *-*-unixware21*) OUT="unixware-2.1" ;; 677 *-*-UnixWare20*) OUT="unixware-2.0" ;; 678 *-*-UnixWare21*) OUT="unixware-2.1" ;; 679 *-*-Unixware20*) OUT="unixware-2.0" ;; 680 *-*-Unixware21*) OUT="unixware-2.1" ;; 681 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 682 RM*-siemens-sysv4) OUT="ReliantUNIX" ;; 683 *-siemens-sysv4) OUT="SINIX" ;; 684 *-hpux1*) 685 if [ $CC = "gcc" ]; 686 then 687 if [ $GCC_BITS = "64" ]; then 688 OUT="hpux64-parisc-gcc" 689 else 690 OUT="hpux-parisc-gcc" 691 fi 692 else 693 OUT="hpux-parisc-$CC" 694 fi 695 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` 696 KERNEL_BITS=${KERNEL_BITS:-32} 697 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` 698 CPU_VERSION=${CPU_VERSION:-0} 699 # See <sys/unistd.h> for further info on CPU_VERSION. 700 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU 701 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi." 702 echo " If you wish to build 32-bit library, the you have to" 703 echo " invoke './Configure hpux-ia32-cc' *manually*." 704 if [ "$TEST" = "false" ]; then 705 echo " You have about 5 seconds to press Ctrl-C to abort." 706 (stty -icanon min 0 time 50; read waste) < /dev/tty 707 fi 708 OUT="hpux64-ia64-cc" 709 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU 710 if [ "$CC" = "cc" ]; then 711 OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc? 712 fi 713 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 714 echo "WARNING! If you wish to build 64-bit library then you have to" 715 echo " invoke './Configure hpux64-parisc2-cc' *manually*." 716 if [ "$TEST" = "false" ]; then 717 echo " You have about 5 seconds to press Ctrl-C to abort." 718 (stty -icanon min 0 time 50; read waste) < /dev/tty 719 fi 720 fi 721 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU 722 : 723 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU 724 : 725 else # Motorola(?) CPU 726 OUT="hpux-$CC" 727 fi 728 options="$options -D_REENTRANT" ;; 729 *-hpux) OUT="hpux-parisc-$CC" ;; 730 # these are all covered by the catchall below 731 # *-aix) OUT="aix-$CC" ;; 732 # *-dgux) OUT="dgux" ;; 733 mips-sony-newsos4) OUT="newsos4-gcc" ;; 734 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; 735 *-*-cygwin) OUT="Cygwin" ;; 736 t3e-cray-unicosmk) OUT="cray-t3e" ;; 737 j90-cray-unicos) OUT="cray-j90" ;; 738 nsr-tandem-nsk) OUT="tandem-c89" ;; 739 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 740esac 741 742# NB: This atalla support has been superceded by the ENGINE support 743# That contains its own header and definitions anyway. Support can 744# be enabled or disabled on any supported platform without external 745# headers, eg. by adding the "hw-atalla" switch to ./config or 746# perl Configure 747# 748# See whether we can compile Atalla support 749#if [ -f /usr/include/atasi.h ] 750#then 751# options="$options -DATALLA" 752#fi 753 754# gcc < 2.8 does not support -mcpu=ultrasparc 755if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 756then 757 echo "WARNING! Do consider upgrading to gcc-2.8 or later." 758 sleep 5 759 OUT=solaris-sparcv9-gcc27 760fi 761if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 762then 763 echo "WARNING! Falling down to 'linux-sparcv8'." 764 echo " Upgrade to gcc-2.8 or later." 765 sleep 5 766 OUT=linux-sparcv8 767fi 768 769case "$GUESSOS" in 770 i386-*) options="$options 386" ;; 771esac 772 773for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha 774do 775 if [ ! -d crypto/$i ] 776 then 777 options="$options no-$i" 778 fi 779done 780 781# Discover Kerberos 5 (since it's still a prototype, we don't 782# do any guesses yet, that's why this section is commented away. 783#if [ -d /usr/kerberos ]; then 784# krb5_dir=/usr/kerberos 785# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ 786# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 787# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 788# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ 789# -a \( -f $krb5_dir/include/krb5.h \) ]; then 790# options="$options --with-krb5-flavor=MIT" 791# fi 792#elif [ -d /usr/heimdal ]; then 793# krb5_dir=/usr/heimdal 794# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ 795# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 796# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 797# -a \( -f $krb5_dir/include/krb5.h \) ]; then 798# options="$options --with-krb5-flavor=Heimdal" 799# fi 800#fi 801 802if [ -z "$OUT" ]; then 803 OUT="$CC" 804fi 805 806if [ ".$PERL" = . ] ; then 807 for i in . `echo $PATH | sed 's/:/ /g'`; do 808 if [ -f "$i/perl5" ] ; then 809 PERL="$i/perl5" 810 break; 811 fi; 812 done 813fi 814 815if [ ".$PERL" = . ] ; then 816 for i in . `echo $PATH | sed 's/:/ /g'`; do 817 if [ -f "$i/perl" ] ; then 818 if "$i/perl" -e 'exit($]<5.0)'; then 819 PERL="$i/perl" 820 break; 821 fi; 822 fi; 823 done 824fi 825 826if [ ".$PERL" = . ] ; then 827 echo "You need Perl 5." 828 exit 1 829fi 830 831# run Configure to check to see if we need to specify the 832# compiler for the platform ... in which case we add it on 833# the end ... otherwise we leave it off 834 835$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null 836if [ $? = "0" ]; then 837 OUT="$OUT-$CC" 838fi 839 840OUT="$PREFIX$OUT" 841 842$PERL ./Configure LIST | grep "$OUT" > /dev/null 843if [ $? = "0" ]; then 844 echo Configuring for $OUT 845 846 if [ "$TEST" = "true" ]; then 847 echo $PERL ./Configure $OUT $options 848 else 849 $PERL ./Configure $OUT $options 850 fi 851else 852 echo "This system ($OUT) is not supported. See file INSTALL for details." 853fi 854) 855