ntp.h revision 309007
1/* 2 * ntp.h - NTP definitions for the masses 3 */ 4#ifndef NTP_H 5#define NTP_H 6 7#include <stddef.h> 8#include <math.h> 9 10#include <ntp_fp.h> 11#include <ntp_types.h> 12#include <ntp_lists.h> 13#include <ntp_stdlib.h> 14#include <ntp_crypto.h> 15#include <ntp_random.h> 16#include <ntp_net.h> 17 18#include <isc/boolean.h> 19 20/* 21 * Calendar arithmetic - contributed by G. Healton 22 */ 23#define YEAR_BREAK 500 /* years < this are tm_year values: 24 * Break < AnyFourDigitYear && Break > 25 * Anytm_yearYear */ 26 27#define YEAR_PIVOT 98 /* 97/98: years < this are year 2000+ 28 * FYI: official UNIX pivot year is 29 * 68/69 */ 30 31/* 32 * Number of Days since 1 BC Gregorian to 1 January of given year 33 */ 34#define julian0(year) (((year) * 365 ) + ((year) > 0 ? (((year) + 3) \ 35 / 4 - ((year - 1) / 100) + ((year - 1) / \ 36 400)) : 0)) 37 38/* 39 * Number of days since start of NTP time to 1 January of given year 40 */ 41#define ntp0(year) (julian0(year) - julian0(1900)) 42 43/* 44 * Number of days since start of UNIX time to 1 January of given year 45 */ 46#define unix0(year) (julian0(year) - julian0(1970)) 47 48/* 49 * LEAP YEAR test for full 4-digit years (e.g, 1999, 2010) 50 */ 51#define isleap_4(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(y % \ 52 400 == 0))) 53 54/* 55 * LEAP YEAR test for tm_year (struct tm) years (e.g, 99, 110) 56 */ 57#define isleap_tm(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(((y) \ 58 + 1900) % 400 == 0))) 59 60/* 61 * to convert simple two-digit years to tm_year style years: 62 * 63 * if (year < YEAR_PIVOT) 64 * year += 100; 65 * 66 * to convert either two-digit OR tm_year years to four-digit years: 67 * 68 * if (year < YEAR_PIVOT) 69 * year += 100; 70 * 71 * if (year < YEAR_BREAK) 72 * year += 1900; 73 */ 74 75/* 76 * How to get signed characters. On machines where signed char works, 77 * use it. On machines where signed char doesn't work, char had better 78 * be signed. 79 */ 80#ifdef NEED_S_CHAR_TYPEDEF 81# if SIZEOF_SIGNED_CHAR 82typedef signed char s_char; 83# else 84typedef char s_char; 85# endif 86 /* XXX: Why is this sequent bit INSIDE this test? */ 87# ifdef sequent 88# undef SO_RCVBUF 89# undef SO_SNDBUF 90# endif 91#endif 92 93/* 94 * NTP protocol parameters. See section 3.2.6 of the specification. 95 */ 96#define NTP_VERSION ((u_char)4) /* current version number */ 97#define NTP_OLDVERSION ((u_char)1) /* oldest credible version */ 98#define NTP_PORT 123 /* included for non-unix machines */ 99 100/* 101 * Poll interval parameters 102 */ 103#define NTP_UNREACH 10 /* poll unreach threshold */ 104#define NTP_MINPOLL 3 /* log2 min poll interval (8 s) */ 105#define NTP_MINDPOLL 6 /* log2 default min poll (64 s) */ 106#define NTP_MAXDPOLL 10 /* log2 default max poll (~17 m) */ 107#define NTP_MAXPOLL 17 /* log2 max poll interval (~36 h) */ 108#define NTP_RETRY 3 /* max packet retries */ 109#define NTP_MINPKT 2 /* guard time (s) */ 110 111/* 112 * Clock filter algorithm tuning parameters 113 */ 114#define MAXDISPERSE 16. /* max dispersion */ 115#define NTP_SHIFT 8 /* clock filter stages */ 116#define NTP_FWEIGHT .5 /* clock filter weight */ 117 118/* 119 * Selection algorithm tuning parameters 120 */ 121#define NTP_MINCLOCK 3 /* min survivors */ 122#define NTP_MAXCLOCK 10 /* max candidates */ 123#define MINDISPERSE .001 /* min distance */ 124#define MAXDISTANCE 1.5 /* max root distance (select threshold) */ 125#define CLOCK_SGATE 3. /* popcorn spike gate */ 126#define HUFFPUFF 900 /* huff-n'-puff sample interval (s) */ 127#define MAXHOP 2 /* anti-clockhop threshold */ 128#define MAX_TTL 8 /* max ttl mapping vector size */ 129#define BEACON 7200 /* manycast beacon interval */ 130#define NTP_MAXEXTEN 2048 /* max extension field size */ 131#define NTP_ORPHWAIT 300 /* orphan wair (s) */ 132 133/* 134 * Miscellaneous stuff 135 */ 136#define NTP_MAXKEY 65535 /* max authentication key number */ 137#define KEY_TYPE_MD5 NID_md5 /* MD5 digest NID */ 138/* 139 * Limits of things 140 */ 141#define MAXFILENAME 256 /* max length of file name */ 142#define MAXHOSTNAME 512 /* max length of host/node name */ 143#define NTP_MAXSTRLEN 256 /* max string length */ 144 145/* 146 * Operations for jitter calculations (these use doubles). 147 * 148 * Note that we carefully separate the jitter component from the 149 * dispersion component (frequency error plus precision). The frequency 150 * error component is computed as CLOCK_PHI times the difference between 151 * the epoch of the time measurement and the reference time. The 152 * precision component is computed as the square root of the mean of the 153 * squares of a zero-mean, uniform distribution of unit maximum 154 * amplitude. Whether this makes statistical sense may be arguable. 155 */ 156#define SQUARE(x) ((x) * (x)) 157#define SQRT(x) (sqrt(x)) 158#define DIFF(x, y) (SQUARE((x) - (y))) 159#define LOGTOD(a) ldexp(1., (int)(a)) /* log2 to double */ 160#define UNIVAR(x) (SQUARE(.28867513 * LOGTOD(x))) /* std uniform distr */ 161#define ULOGTOD(a) ldexp(1., (int)(a)) /* ulog2 to double */ 162 163#define EVENT_TIMEOUT 0 /* one second, that is */ 164 165 166/* 167 * The interface structure is used to hold the addresses and socket 168 * numbers of each of the local network addresses we are using. 169 * Because "interface" is a reserved word in C++ and has so many 170 * varied meanings, a change to "endpt" (via typedef) is under way. 171 * Eventually the struct tag will change from interface to endpt_tag. 172 * endpt is unrelated to the select algorithm's struct endpoint. 173 */ 174typedef struct interface endpt; 175struct interface { 176 endpt * elink; /* endpt list link */ 177 endpt * mclink; /* per-AF_* multicast list */ 178 void * ioreg_ctx; /* IO registration context */ 179 SOCKET fd; /* socket descriptor */ 180 SOCKET bfd; /* for receiving broadcasts */ 181 u_int32 ifnum; /* endpt instance count */ 182 sockaddr_u sin; /* unicast address */ 183 sockaddr_u mask; /* subnet mask */ 184 sockaddr_u bcast; /* broadcast address */ 185 char name[32]; /* name of interface */ 186 u_short family; /* AF_INET/AF_INET6 */ 187 u_short phase; /* phase in update cycle */ 188 u_int32 flags; /* interface flags */ 189 int last_ttl; /* last TTL specified */ 190 u_int32 addr_refid; /* IPv4 addr or IPv6 hash */ 191 int num_mcast; /* mcast addrs enabled */ 192 u_long starttime; /* current_time at creation */ 193 volatile long received; /* number of incoming packets */ 194 long sent; /* number of outgoing packets */ 195 long notsent; /* number of send failures */ 196 u_int ifindex; /* for IPV6_MULTICAST_IF */ 197 isc_boolean_t ignore_packets; /* listen-read-drop this? */ 198 struct peer * peers; /* list of peers using endpt */ 199 u_int peercnt; /* count of same */ 200}; 201 202/* 203 * Flags for interfaces 204 */ 205#define INT_UP 0x001 /* Interface is up */ 206#define INT_PPP 0x002 /* Point-to-point interface */ 207#define INT_LOOPBACK 0x004 /* the loopback interface */ 208#define INT_BROADCAST 0x008 /* can broadcast out this interface */ 209#define INT_MULTICAST 0x010 /* can multicast out this interface */ 210#define INT_BCASTOPEN 0x020 /* broadcast receive socket is open */ 211#define INT_MCASTOPEN 0x040 /* multicasting enabled */ 212#define INT_WILDCARD 0x080 /* wildcard interface - usually skipped */ 213#define INT_MCASTIF 0x100 /* bound directly to MCAST address */ 214#define INT_PRIVACY 0x200 /* RFC 4941 IPv6 privacy address */ 215#define INT_BCASTXMIT 0x400 /* socket setup to allow broadcasts */ 216 217/* 218 * Define flasher bits (tests 1 through 11 in packet procedure) 219 * These reveal the state at the last grumble from the peer and are 220 * most handy for diagnosing problems, even if not strictly a state 221 * variable in the spec. These are recorded in the peer structure. 222 * 223 * Packet errors 224 */ 225#define TEST1 0X0001 /* duplicate packet */ 226#define TEST2 0x0002 /* bogus packet */ 227#define TEST3 0x0004 /* protocol unsynchronized */ 228#define TEST4 0x0008 /* access denied */ 229#define TEST5 0x0010 /* bad authentication */ 230#define TEST6 0x0020 /* bad synch or stratum */ 231#define TEST7 0x0040 /* bad header */ 232#define TEST8 0x0080 /* bad autokey */ 233#define TEST9 0x0100 /* bad crypto */ 234#define PKT_TEST_MASK (TEST1 | TEST2 | TEST3 | TEST4 | TEST5 |\ 235 TEST6 | TEST7 | TEST8 | TEST9) 236/* 237 * Peer errors 238 */ 239#define TEST10 0x0200 /* peer bad synch or stratum */ 240#define TEST11 0x0400 /* peer distance exceeded */ 241#define TEST12 0x0800 /* peer synchronization loop */ 242#define TEST13 0x1000 /* peer unreacable */ 243#define PEER_TEST_MASK (TEST10 | TEST11 | TEST12 | TEST13) 244 245/* 246 * Unused flags 247 */ 248#define TEST14 0x2000 249#define TEST15 0x4000 250#define TEST16 0x8000 251 252/* 253 * The peer structure. Holds state information relating to the guys 254 * we are peering with. Most of this stuff is from section 3.2 of the 255 * spec. 256 */ 257struct peer { 258 struct peer *p_link; /* link pointer in free & peer lists */ 259 struct peer *adr_link; /* link pointer in address hash */ 260 struct peer *aid_link; /* link pointer in associd hash */ 261 struct peer *ilink; /* list of peers for interface */ 262 sockaddr_u srcadr; /* address of remote host */ 263 char * hostname; /* if non-NULL, remote name */ 264 struct addrinfo *addrs; /* hostname query result */ 265 struct addrinfo *ai; /* position within addrs */ 266 endpt * dstadr; /* local address */ 267 associd_t associd; /* association ID */ 268 u_char version; /* version number */ 269 u_char hmode; /* local association mode */ 270 u_char hpoll; /* local poll interval */ 271 u_char minpoll; /* min poll interval */ 272 u_char maxpoll; /* max poll interval */ 273 u_int flags; /* association flags */ 274 u_char cast_flags; /* additional flags */ 275 u_char last_event; /* last peer error code */ 276 u_char num_events; /* number of error events */ 277 u_int32 ttl; /* ttl/refclock mode */ 278 char *ident; /* group identifier name */ 279 280 /* 281 * Variables used by reference clock support 282 */ 283#ifdef REFCLOCK 284 struct refclockproc *procptr; /* refclock structure pointer */ 285 u_char refclktype; /* reference clock type */ 286 u_char refclkunit; /* reference clock unit number */ 287 u_char sstclktype; /* clock type for system status word */ 288#endif /* REFCLOCK */ 289 290 /* 291 * Variables set by received packet 292 */ 293 u_char leap; /* local leap indicator */ 294 u_char pmode; /* remote association mode */ 295 u_char stratum; /* remote stratum */ 296 u_char ppoll; /* remote poll interval */ 297 s_char precision; /* remote clock precision */ 298 double rootdelay; /* roundtrip delay to primary source */ 299 double rootdisp; /* dispersion to primary source */ 300 u_int32 refid; /* remote reference ID */ 301 l_fp reftime; /* update epoch */ 302 303 /* 304 * Variables used by authenticated client 305 */ 306 keyid_t keyid; /* current key ID */ 307#ifdef AUTOKEY 308#define clear_to_zero opcode 309 u_int32 opcode; /* last request opcode */ 310 associd_t assoc; /* peer association ID */ 311 u_int32 crypto; /* peer status word */ 312 EVP_PKEY *pkey; /* public key */ 313 const EVP_MD *digest; /* message digest algorithm */ 314 char *subject; /* certificate subject name */ 315 char *issuer; /* certificate issuer name */ 316 struct cert_info *xinfo; /* issuer certificate */ 317 keyid_t pkeyid; /* previous key ID */ 318 keyid_t hcookie; /* host cookie */ 319 keyid_t pcookie; /* peer cookie */ 320 const struct pkey_info *ident_pkey; /* identity key */ 321 BIGNUM *iffval; /* identity challenge (IFF, GQ, MV) */ 322 const BIGNUM *grpkey; /* identity challenge key (GQ) */ 323 struct value cookval; /* receive cookie values */ 324 struct value recval; /* receive autokey values */ 325 struct exten *cmmd; /* extension pointer */ 326 u_long refresh; /* next refresh epoch */ 327 328 /* 329 * Variables used by authenticated server 330 */ 331 keyid_t *keylist; /* session key ID list */ 332 int keynumber; /* current key number */ 333 struct value encrypt; /* send encrypt values */ 334 struct value sndval; /* send autokey values */ 335#else /* !AUTOKEY follows */ 336#define clear_to_zero status 337#endif /* !AUTOKEY */ 338 339 /* 340 * Ephemeral state variables 341 */ 342 u_char status; /* peer status */ 343 u_char new_status; /* under-construction status */ 344 u_char reach; /* reachability register */ 345 int flash; /* protocol error test tally bits */ 346 u_long epoch; /* reference epoch */ 347 int burst; /* packets remaining in burst */ 348 int retry; /* retry counter */ 349 int flip; /* interleave mode control */ 350 int filter_nextpt; /* index into filter shift register */ 351 double filter_delay[NTP_SHIFT]; /* delay shift register */ 352 double filter_offset[NTP_SHIFT]; /* offset shift register */ 353 double filter_disp[NTP_SHIFT]; /* dispersion shift register */ 354 u_long filter_epoch[NTP_SHIFT]; /* epoch shift register */ 355 u_char filter_order[NTP_SHIFT]; /* filter sort index */ 356 l_fp rec; /* receive time stamp */ 357 l_fp xmt; /* transmit time stamp */ 358 l_fp dst; /* destination timestamp */ 359 l_fp aorg; /* origin timestamp */ 360 l_fp borg; /* alternate origin timestamp */ 361 l_fp bxmt; /* most recent broadcast transmit timestamp */ 362 double offset; /* peer clock offset */ 363 double delay; /* peer roundtrip delay */ 364 double jitter; /* peer jitter (squares) */ 365 double disp; /* peer dispersion */ 366 double xleave; /* interleave delay */ 367 double bias; /* programmed offset bias */ 368 369 /* 370 * Variables used to correct for packet length and asymmetry. 371 */ 372 double t21; /* outbound packet delay */ 373 int t21_bytes; /* outbound packet length */ 374 int t21_last; /* last outbound packet length */ 375 double r21; /* outbound data rate */ 376 double t34; /* inbound packet delay */ 377 int t34_bytes; /* inbound packet length */ 378 double r34; /* inbound data rate */ 379 380 /* 381 * End of clear-to-zero area 382 */ 383 u_long update; /* receive epoch */ 384#define end_clear_to_zero update 385 int unreach; /* watchdog counter */ 386 int throttle; /* rate control */ 387 u_long outdate; /* send time last packet */ 388 u_long nextdate; /* send time next packet */ 389 390 /* 391 * Statistic counters 392 */ 393 u_long timereset; /* time stat counters were reset */ 394 u_long timelastrec; /* last packet received time, incl. trash */ 395 u_long timereceived; /* last (clean) packet received time */ 396 u_long timereachable; /* last reachable/unreachable time */ 397 398 u_long sent; /* packets sent */ 399 u_long received; /* packets received */ 400 u_long processed; /* packets processed */ 401 u_long badauth; /* bad authentication (TEST5) */ 402 u_long badNAK; /* invalid crypto-NAK */ 403 u_long bogusorg; /* bogus origin (TEST2, TEST3) */ 404 u_long oldpkt; /* old duplicate (TEST1) */ 405 u_long seldisptoolarge; /* bad header (TEST6, TEST7) */ 406 u_long selbroken; /* KoD received */ 407}; 408 409/* 410 * Values for peer.leap, sys_leap 411 */ 412#define LEAP_NOWARNING 0x0 /* normal, no leap second warning */ 413#define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */ 414#define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */ 415#define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */ 416 417/* 418 * Values for peer mode and packet mode. Only the modes through 419 * MODE_BROADCAST and MODE_BCLIENT appear in the transition 420 * function. MODE_CONTROL and MODE_PRIVATE can appear in packets, 421 * but those never survive to the transition function. 422 */ 423#define MODE_UNSPEC 0 /* unspecified (old version) */ 424#define MODE_ACTIVE 1 /* symmetric active mode */ 425#define MODE_PASSIVE 2 /* symmetric passive mode */ 426#define MODE_CLIENT 3 /* client mode */ 427#define MODE_SERVER 4 /* server mode */ 428#define MODE_BROADCAST 5 /* broadcast mode */ 429/* 430 * These can appear in packets 431 */ 432#define MODE_CONTROL 6 /* control mode */ 433#define MODE_PRIVATE 7 /* private mode */ 434/* 435 * This is a made-up mode for broadcast client. 436 */ 437#define MODE_BCLIENT 6 /* broadcast client mode */ 438 439/* 440 * Values for peer.stratum, sys_stratum 441 */ 442#define STRATUM_REFCLOCK ((u_char)0) /* default stratum */ 443/* A stratum of 0 in the packet is mapped to 16 internally */ 444#define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */ 445#define STRATUM_UNSPEC ((u_char)16) /* unspecified */ 446 447/* 448 * Values for peer.flags (u_int) 449 */ 450#define FLAG_CONFIG 0x0001 /* association was configured */ 451#define FLAG_PREEMPT 0x0002 /* preemptable association */ 452#define FLAG_AUTHENTIC 0x0004 /* last message was authentic */ 453#define FLAG_REFCLOCK 0x0008 /* this is actually a reference clock */ 454#define FLAG_BC_VOL 0x0010 /* broadcast client volleying */ 455#define FLAG_PREFER 0x0020 /* prefer peer */ 456#define FLAG_BURST 0x0040 /* burst mode */ 457#define FLAG_PPS 0x0080 /* steered by PPS */ 458#define FLAG_IBURST 0x0100 /* initial burst mode */ 459#define FLAG_NOSELECT 0x0200 /* never select */ 460#define FLAG_TRUE 0x0400 /* force truechimer */ 461#define FLAG_SKEY 0x0800 /* autokey authentication */ 462#define FLAG_XLEAVE 0x1000 /* interleaved protocol */ 463#define FLAG_XB 0x2000 /* interleaved broadcast */ 464#define FLAG_XBOGUS 0x4000 /* interleaved bogus packet */ 465#ifdef OPENSSL 466# define FLAG_ASSOC 0x8000 /* autokey request */ 467#endif /* OPENSSL */ 468#define FLAG_TSTAMP_PPS 0x10000 /* PPS source provides absolute timestamp */ 469 470/* 471 * Definitions for the clear() routine. We use memset() to clear 472 * the parts of the peer structure which go to zero. These are 473 * used to calculate the start address and length of the area. 474 */ 475#define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) 476#define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) 477#define LEN_CLEAR_TO_ZERO(p) (END_CLEAR_TO_ZERO(p) - CLEAR_TO_ZERO(p)) 478#define CRYPTO_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) 479#define END_CRYPTO_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) 480#define LEN_CRYPTO_TO_ZERO (END_CRYPTO_TO_ZERO((struct peer *)0) \ 481 - CRYPTO_TO_ZERO((struct peer *)0)) 482 483/* 484 * Reference clock types. Added as necessary. 485 */ 486#define REFCLK_NONE 0 /* unknown or missing */ 487#define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */ 488#define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */ 489#define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */ 490#define REFCLK_SPECTRACOM 4 /* Spectracom (generic) Receivers */ 491#define REFCLK_TRUETIME 5 /* TrueTime (generic) Receivers */ 492#define REFCLK_IRIG_AUDIO 6 /* IRIG-B/W audio decoder */ 493#define REFCLK_CHU_AUDIO 7 /* CHU audio demodulator/decoder */ 494#define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS,MSF) */ 495#define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */ 496#define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */ 497#define REFCLK_GPS_ARBITER 11 /* Arbiter 1088A/B/ GPS */ 498#define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */ 499#define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */ 500#define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */ 501#define REFCLK_GPSTM_TRUE 15 /* OLD TrueTime GPS/TM-TMD Receiver */ 502#define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */ 503#define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */ 504#define REFCLK_ACTS 18 /* Generic Auto Computer Time Service */ 505#define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */ 506#define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */ 507#define REFCLK_GPS_VME 21 /* TrueTime GPS-VME Interface */ 508#define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */ 509#define REFCLK_PTB_ACTS 23 /* replaced by REFCLK_ACTS */ 510#define REFCLK_USNO 24 /* replaced by REFCLK_ACTS */ 511#define REFCLK_GPS_HP 26 /* HP 58503A Time/Frequency Receiver */ 512#define REFCLK_ARCRON_MSF 27 /* ARCRON MSF radio clock. */ 513#define REFCLK_SHM 28 /* clock attached thru shared memory */ 514#define REFCLK_PALISADE 29 /* Trimble Navigation Palisade GPS */ 515#define REFCLK_ONCORE 30 /* Motorola UT Oncore GPS */ 516#define REFCLK_GPS_JUPITER 31 /* Rockwell Jupiter GPS receiver */ 517#define REFCLK_CHRONOLOG 32 /* Chrono-log K WWVB receiver */ 518#define REFCLK_DUMBCLOCK 33 /* Dumb localtime clock */ 519#define REFCLK_ULINK 34 /* Ultralink M320 WWVB receiver */ 520#define REFCLK_PCF 35 /* Conrad parallel port radio clock */ 521#define REFCLK_WWV_AUDIO 36 /* WWV/H audio demodulator/decoder */ 522#define REFCLK_FG 37 /* Forum Graphic GPS */ 523#define REFCLK_HOPF_SERIAL 38 /* hopf DCF77/GPS serial receiver */ 524#define REFCLK_HOPF_PCI 39 /* hopf DCF77/GPS PCI receiver */ 525#define REFCLK_JJY 40 /* JJY receiver */ 526#define REFCLK_TT560 41 /* TrueTime 560 IRIG-B decoder */ 527#define REFCLK_ZYFER 42 /* Zyfer GPStarplus receiver */ 528#define REFCLK_RIPENCC 43 /* RIPE NCC Trimble driver */ 529#define REFCLK_NEOCLOCK4X 44 /* NeoClock4X DCF77 or TDF receiver */ 530#define REFCLK_TSYNCPCI 45 /* Spectracom TSYNC PCI timing board */ 531#define REFCLK_GPSDJSON 46 532#define REFCLK_MAX 46 533 534 535/* 536 * NTP packet format. The mac field is optional. It isn't really 537 * an l_fp either, but for now declaring it that way is convenient. 538 * See Appendix A in the specification. 539 * 540 * Note that all u_fp and l_fp values arrive in network byte order 541 * and must be converted (except the mac, which isn't, really). 542 */ 543struct pkt { 544 u_char li_vn_mode; /* peer leap indicator */ 545 u_char stratum; /* peer stratum */ 546 u_char ppoll; /* peer poll interval */ 547 s_char precision; /* peer clock precision */ 548 u_fp rootdelay; /* roundtrip delay to primary source */ 549 u_fp rootdisp; /* dispersion to primary source*/ 550 u_int32 refid; /* reference id */ 551 l_fp reftime; /* last update time */ 552 l_fp org; /* originate time stamp */ 553 l_fp rec; /* receive time stamp */ 554 l_fp xmt; /* transmit time stamp */ 555 556#define MIN_V4_PKT_LEN (12 * sizeof(u_int32)) /* min header length */ 557#define LEN_PKT_NOMAC (12 * sizeof(u_int32)) /* min header length */ 558#define MIN_MAC_LEN (1 * sizeof(u_int32)) /* crypto_NAK */ 559#define MAX_MD5_LEN (5 * sizeof(u_int32)) /* MD5 */ 560#define MAX_MAC_LEN (6 * sizeof(u_int32)) /* SHA */ 561 562 /* 563 * The length of the packet less MAC must be a multiple of 64 564 * with an RSA modulus and Diffie-Hellman prime of 256 octets 565 * and maximum host name of 128 octets, the maximum autokey 566 * command is 152 octets and maximum autokey response is 460 567 * octets. A packet can contain no more than one command and one 568 * response, so the maximum total extension field length is 864 569 * octets. But, to handle humungus certificates, the bank must 570 * be broke. 571 * 572 * The different definitions of the 'exten' field are here for 573 * the benefit of applications that want to send a packet from 574 * an auto variable in the stack - not using the AUTOKEY version 575 * saves 2KB of stack space. The receive buffer should ALWAYS be 576 * big enough to hold a full extended packet if the extension 577 * fields have to be parsed or skipped. 578 */ 579#ifdef AUTOKEY 580 u_int32 exten[(NTP_MAXEXTEN + MAX_MAC_LEN) / sizeof(u_int32)]; 581#else /* !AUTOKEY follows */ 582 u_int32 exten[(MAX_MAC_LEN) / sizeof(u_int32)]; 583#endif /* !AUTOKEY */ 584}; 585 586/* 587 * Stuff for extracting things from li_vn_mode 588 */ 589#define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7)) 590#define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7)) 591#define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3)) 592 593/* 594 * Stuff for putting things back into li_vn_mode in packets and vn_mode 595 * in ntp_monitor.c's mon_entry. 596 */ 597#define VN_MODE(v, m) ((((v) & 7) << 3) | ((m) & 0x7)) 598#define PKT_LI_VN_MODE(l, v, m) ((((l) & 3) << 6) | VN_MODE((v), (m))) 599 600 601/* 602 * Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0 603 * on output. 604 */ 605#define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\ 606 (STRATUM_UNSPEC) : (s))) 607 608#define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\ 609 (STRATUM_PKT_UNSPEC) : (s))) 610 611/* 612 * Event codes. Used for reporting errors/events to the control module 613 */ 614#define PEER_EVENT 0x080 /* this is a peer event */ 615#define CRPT_EVENT 0x100 /* this is a crypto event */ 616 617/* 618 * System event codes 619 */ 620#define EVNT_UNSPEC 0 /* unspecified */ 621#define EVNT_NSET 1 /* freq not set */ 622#define EVNT_FSET 2 /* freq set */ 623#define EVNT_SPIK 3 /* spike detect */ 624#define EVNT_FREQ 4 /* freq mode */ 625#define EVNT_SYNC 5 /* clock sync */ 626#define EVNT_SYSRESTART 6 /* restart */ 627#define EVNT_SYSFAULT 7 /* panic stop */ 628#define EVNT_NOPEER 8 /* no sys peer */ 629#define EVNT_ARMED 9 /* leap armed */ 630#define EVNT_DISARMED 10 /* leap disarmed */ 631#define EVNT_LEAP 11 /* leap event */ 632#define EVNT_CLOCKRESET 12 /* clock step */ 633#define EVNT_KERN 13 /* kernel event */ 634#define EVNT_TAI 14 /* TAI */ 635#define EVNT_LEAPVAL 15 /* stale leapsecond values */ 636 637/* 638 * Peer event codes 639 */ 640#define PEVNT_MOBIL (1 | PEER_EVENT) /* mobilize */ 641#define PEVNT_DEMOBIL (2 | PEER_EVENT) /* demobilize */ 642#define PEVNT_UNREACH (3 | PEER_EVENT) /* unreachable */ 643#define PEVNT_REACH (4 | PEER_EVENT) /* reachable */ 644#define PEVNT_RESTART (5 | PEER_EVENT) /* restart */ 645#define PEVNT_REPLY (6 | PEER_EVENT) /* no reply */ 646#define PEVNT_RATE (7 | PEER_EVENT) /* rate exceeded */ 647#define PEVNT_DENY (8 | PEER_EVENT) /* access denied */ 648#define PEVNT_ARMED (9 | PEER_EVENT) /* leap armed */ 649#define PEVNT_NEWPEER (10 | PEER_EVENT) /* sys peer */ 650#define PEVNT_CLOCK (11 | PEER_EVENT) /* clock event */ 651#define PEVNT_AUTH (12 | PEER_EVENT) /* bad auth */ 652#define PEVNT_POPCORN (13 | PEER_EVENT) /* popcorn */ 653#define PEVNT_XLEAVE (14 | PEER_EVENT) /* interleave mode */ 654#define PEVNT_XERR (15 | PEER_EVENT) /* interleave error */ 655 656/* 657 * Clock event codes 658 */ 659#define CEVNT_NOMINAL 0 /* unspecified */ 660#define CEVNT_TIMEOUT 1 /* no reply */ 661#define CEVNT_BADREPLY 2 /* bad format */ 662#define CEVNT_FAULT 3 /* fault */ 663#define CEVNT_PROP 4 /* bad signal */ 664#define CEVNT_BADDATE 5 /* bad date */ 665#define CEVNT_BADTIME 6 /* bad time */ 666#define CEVNT_MAX CEVNT_BADTIME 667 668/* 669 * Very misplaced value. Default port through which we send traps. 670 */ 671#define TRAPPORT 18447 672 673 674/* 675 * To speed lookups, peers are hashed by the low order bits of the 676 * remote IP address. These definitions relate to that. 677 */ 678#define NTP_HASH_SIZE 128 679#define NTP_HASH_MASK (NTP_HASH_SIZE-1) 680#define NTP_HASH_ADDR(src) (sock_hash(src) & NTP_HASH_MASK) 681 682/* 683 * min, min3 and max. Makes it easier to transliterate the spec without 684 * thinking about it. 685 */ 686#define min(a,b) (((a) < (b)) ? (a) : (b)) 687#define max(a,b) (((a) > (b)) ? (a) : (b)) 688#define min3(a,b,c) min(min((a),(b)), (c)) 689 690 691/* 692 * Configuration items. These are for the protocol module (proto_config()) 693 */ 694#define PROTO_BROADCLIENT 1 695#define PROTO_PRECISION 2 /* (not used) */ 696#define PROTO_AUTHENTICATE 3 697#define PROTO_BROADDELAY 4 698#define PROTO_AUTHDELAY 5 /* (not used) */ 699#define PROTO_MULTICAST_ADD 6 700#define PROTO_MULTICAST_DEL 7 701#define PROTO_NTP 8 702#define PROTO_KERNEL 9 703#define PROTO_MONITOR 10 704#define PROTO_FILEGEN 11 705#define PROTO_PPS 12 706#define PROTO_CAL 13 707#define PROTO_MINCLOCK 14 708#define PROTO_MAXCLOCK 15 709#define PROTO_MINSANE 16 710#define PROTO_FLOOR 17 711#define PROTO_CEILING 18 712#define PROTO_COHORT 19 713#define PROTO_CALLDELAY 20 714#define PROTO_MINDISP 21 715#define PROTO_MAXDIST 22 716 /* available 23 */ 717#define PROTO_MAXHOP 24 718#define PROTO_BEACON 25 719#define PROTO_ORPHAN 26 720#define PROTO_ORPHWAIT 27 721#define PROTO_MODE7 28 722#define PROTO_UECRYPTO 29 723#define PROTO_UECRYPTONAK 30 724#define PROTO_UEDIGEST 31 725#define PROTO_PCEDIGEST 32 726#define PROTO_BCPOLLBSTEP 33 727 728/* 729 * Configuration items for the loop filter 730 */ 731#define LOOP_DRIFTINIT 1 /* iniitialize frequency */ 732#define LOOP_KERN_CLEAR 2 /* set initial frequency offset */ 733#define LOOP_MAX 3 /* set both step offsets */ 734#define LOOP_MAX_BACK 4 /* set backward-step offset */ 735#define LOOP_MAX_FWD 5 /* set forward-step offset */ 736#define LOOP_PANIC 6 /* set panic offseet */ 737#define LOOP_PHI 7 /* set dispersion rate */ 738#define LOOP_MINSTEP 8 /* set step timeout */ 739#define LOOP_MINPOLL 9 /* set min poll interval (log2 s) */ 740#define LOOP_ALLAN 10 /* set minimum Allan intercept */ 741#define LOOP_HUFFPUFF 11 /* set huff-n'-puff filter length */ 742#define LOOP_FREQ 12 /* set initial frequency */ 743#define LOOP_CODEC 13 /* set audio codec frequency */ 744#define LOOP_LEAP 14 /* insert leap after second 23:59 */ 745#define LOOP_TICK 15 /* sim. low precision clock */ 746 747/* 748 * Configuration items for the stats printer 749 */ 750#define STATS_FREQ_FILE 1 /* configure drift file */ 751#define STATS_STATSDIR 2 /* directory prefix for stats files */ 752#define STATS_PID_FILE 3 /* configure ntpd PID file */ 753#define STATS_LEAP_FILE 4 /* configure ntpd leapseconds file */ 754 755#define MJD_1900 15020 /* MJD for 1 Jan 1900 */ 756 757/* 758 * Default parameters. We use these in the absence of something better. 759 */ 760#define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */ 761 762/* 763 * Structure used optionally for monitoring when this is turned on. 764 */ 765typedef struct mon_data mon_entry; 766struct mon_data { 767 mon_entry * hash_next; /* next structure in hash list */ 768 DECL_DLIST_LINK(mon_entry, mru);/* MRU list link pointers */ 769 struct interface * lcladr; /* address on which this arrived */ 770 l_fp first; /* first time seen */ 771 l_fp last; /* last time seen */ 772 int leak; /* leaky bucket accumulator */ 773 int count; /* total packet count */ 774 u_short flags; /* restrict flags */ 775 u_char vn_mode; /* packet mode & version */ 776 u_char cast_flags; /* flags MDF_?CAST */ 777 sockaddr_u rmtadr; /* address of remote host */ 778}; 779 780/* 781 * Values for cast_flags in mon_entry and struct peer. mon_entry uses 782 * only the first three, MDF_UCAST, MDF_MCAST, and MDF_BCAST. 783 */ 784#define MDF_UCAST 0x01 /* unicast client */ 785#define MDF_MCAST 0x02 /* multicast server */ 786#define MDF_BCAST 0x04 /* broadcast server */ 787#define MDF_POOL 0x08 /* pool client solicitor */ 788#define MDF_ACAST 0x10 /* manycast client solicitor */ 789#define MDF_BCLNT 0x20 /* eph. broadcast/multicast client */ 790#define MDF_UCLNT 0x40 /* preemptible manycast or pool client */ 791/* 792 * In the context of struct peer in ntpd, three of the cast_flags bits 793 * represent configured associations which never receive packets, and 794 * whose reach is always 0: MDF_BCAST, MDF_MCAST, and MDF_ACAST. The 795 * last can be argued as responses are received, but those responses do 796 * not affect the MDF_ACAST association's reach register, rather they 797 * (may) result in mobilizing ephemeral MDF_ACLNT associations. 798 */ 799#define MDF_TXONLY_MASK (MDF_BCAST | MDF_MCAST | MDF_ACAST | MDF_POOL) 800/* 801 * manycastclient-like solicitor association cast_flags bits 802 */ 803#define MDF_SOLICIT_MASK (MDF_ACAST | MDF_POOL) 804/* 805 * Values used with mon_enabled to indicate reason for enabling monitoring 806 */ 807#define MON_OFF 0x00 /* no monitoring */ 808#define MON_ON 0x01 /* monitoring explicitly enabled */ 809#define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */ 810/* 811 * Structure used for restrictlist entries 812 */ 813typedef struct res_addr4_tag { 814 u_int32 addr; /* IPv4 addr (host order) */ 815 u_int32 mask; /* IPv4 mask (host order) */ 816} res_addr4; 817 818typedef struct res_addr6_tag { 819 struct in6_addr addr; /* IPv6 addr (net order) */ 820 struct in6_addr mask; /* IPv6 mask (net order) */ 821} res_addr6; 822 823typedef struct restrict_u_tag restrict_u; 824struct restrict_u_tag { 825 restrict_u * link; /* link to next entry */ 826 u_int32 count; /* number of packets matched */ 827 u_short flags; /* accesslist flags */ 828 u_short mflags; /* match flags */ 829 u_long expire; /* valid until time */ 830 union { /* variant starting here */ 831 res_addr4 v4; 832 res_addr6 v6; 833 } u; 834}; 835#define V4_SIZEOF_RESTRICT_U (offsetof(restrict_u, u) \ 836 + sizeof(res_addr4)) 837#define V6_SIZEOF_RESTRICT_U (offsetof(restrict_u, u) \ 838 + sizeof(res_addr6)) 839 840/* 841 * Access flags 842 */ 843#define RES_IGNORE 0x0001 /* ignore packet */ 844#define RES_DONTSERVE 0x0002 /* access denied */ 845#define RES_DONTTRUST 0x0004 /* authentication required */ 846#define RES_VERSION 0x0008 /* version mismatch */ 847#define RES_NOPEER 0x0010 /* new association denied */ 848#define RES_LIMITED 0x0020 /* packet rate exceeded */ 849#define RES_FLAGS (RES_IGNORE | RES_DONTSERVE |\ 850 RES_DONTTRUST | RES_VERSION |\ 851 RES_NOPEER | RES_LIMITED) 852 853#define RES_NOQUERY 0x0040 /* mode 6/7 packet denied */ 854#define RES_NOMODIFY 0x0080 /* mode 6/7 modify denied */ 855#define RES_NOTRAP 0x0100 /* mode 6/7 set trap denied */ 856#define RES_LPTRAP 0x0200 /* mode 6/7 low priority trap */ 857 858#define RES_KOD 0x0400 /* send kiss of death packet */ 859#define RES_MSSNTP 0x0800 /* enable MS-SNTP authentication */ 860#define RES_FLAKE 0x1000 /* flakeway - drop 10% */ 861#define RES_NOMRULIST 0x2000 /* mode 6 mrulist denied */ 862 863#define RES_ALLFLAGS (RES_FLAGS | RES_NOQUERY | \ 864 RES_NOMODIFY | RES_NOTRAP | \ 865 RES_LPTRAP | RES_KOD | \ 866 RES_MSSNTP | RES_FLAKE | \ 867 RES_NOMRULIST) 868 869/* 870 * Match flags 871 */ 872#define RESM_INTERFACE 0x1000 /* this is an interface */ 873#define RESM_NTPONLY 0x2000 /* match source port 123 */ 874#define RESM_SOURCE 0x4000 /* from "restrict source" */ 875 876/* 877 * Restriction configuration ops 878 */ 879#define RESTRICT_FLAGS 1 /* add flags to restrict entry */ 880#define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */ 881#define RESTRICT_REMOVE 3 /* remove a restrict entry */ 882#define RESTRICT_REMOVEIF 4 /* remove an interface restrict entry */ 883 884/* 885 * Endpoint structure for the select algorithm 886 */ 887struct endpoint { 888 double val; /* offset of endpoint */ 889 int type; /* interval entry/exit */ 890}; 891 892/* 893 * Association matching AM[] return codes 894 */ 895#define AM_ERR -1 /* error */ 896#define AM_NOMATCH 0 /* no match */ 897#define AM_PROCPKT 1 /* server/symmetric packet */ 898#define AM_BCST 2 /* broadcast packet */ 899#define AM_FXMIT 3 /* client packet */ 900#define AM_MANYCAST 4 /* manycast or pool */ 901#define AM_NEWPASS 5 /* new passive */ 902#define AM_NEWBCL 6 /* new broadcast */ 903#define AM_POSSBCL 7 /* discard broadcast */ 904 905/* NetInfo configuration locations */ 906#ifdef HAVE_NETINFO 907#define NETINFO_CONFIG_DIR "/config/ntp" 908#endif 909 910/* ntpq -c mrulist rows per request limit in ntpd */ 911#define MRU_ROW_LIMIT 256 912/* similar datagrams per response limit for ntpd */ 913#define MRU_FRAGS_LIMIT 128 914#endif /* NTP_H */ 915