PeepholeOptimizer.cpp revision 341825
1//===- PeepholeOptimizer.cpp - Peephole Optimizations ---------------------===// 2// 3// The LLVM Compiler Infrastructure 4// 5// This file is distributed under the University of Illinois Open Source 6// License. See LICENSE.TXT for details. 7// 8//===----------------------------------------------------------------------===// 9// 10// Perform peephole optimizations on the machine code: 11// 12// - Optimize Extensions 13// 14// Optimization of sign / zero extension instructions. It may be extended to 15// handle other instructions with similar properties. 16// 17// On some targets, some instructions, e.g. X86 sign / zero extension, may 18// leave the source value in the lower part of the result. This optimization 19// will replace some uses of the pre-extension value with uses of the 20// sub-register of the results. 21// 22// - Optimize Comparisons 23// 24// Optimization of comparison instructions. For instance, in this code: 25// 26// sub r1, 1 27// cmp r1, 0 28// bz L1 29// 30// If the "sub" instruction all ready sets (or could be modified to set) the 31// same flag that the "cmp" instruction sets and that "bz" uses, then we can 32// eliminate the "cmp" instruction. 33// 34// Another instance, in this code: 35// 36// sub r1, r3 | sub r1, imm 37// cmp r3, r1 or cmp r1, r3 | cmp r1, imm 38// bge L1 39// 40// If the branch instruction can use flag from "sub", then we can replace 41// "sub" with "subs" and eliminate the "cmp" instruction. 42// 43// - Optimize Loads: 44// 45// Loads that can be folded into a later instruction. A load is foldable 46// if it loads to virtual registers and the virtual register defined has 47// a single use. 48// 49// - Optimize Copies and Bitcast (more generally, target specific copies): 50// 51// Rewrite copies and bitcasts to avoid cross register bank copies 52// when possible. 53// E.g., Consider the following example, where capital and lower 54// letters denote different register file: 55// b = copy A <-- cross-bank copy 56// C = copy b <-- cross-bank copy 57// => 58// b = copy A <-- cross-bank copy 59// C = copy A <-- same-bank copy 60// 61// E.g., for bitcast: 62// b = bitcast A <-- cross-bank copy 63// C = bitcast b <-- cross-bank copy 64// => 65// b = bitcast A <-- cross-bank copy 66// C = copy A <-- same-bank copy 67//===----------------------------------------------------------------------===// 68 69#include "llvm/ADT/DenseMap.h" 70#include "llvm/ADT/Optional.h" 71#include "llvm/ADT/SmallPtrSet.h" 72#include "llvm/ADT/SmallSet.h" 73#include "llvm/ADT/SmallVector.h" 74#include "llvm/ADT/Statistic.h" 75#include "llvm/CodeGen/MachineBasicBlock.h" 76#include "llvm/CodeGen/MachineDominators.h" 77#include "llvm/CodeGen/MachineFunction.h" 78#include "llvm/CodeGen/MachineFunctionPass.h" 79#include "llvm/CodeGen/MachineInstr.h" 80#include "llvm/CodeGen/MachineInstrBuilder.h" 81#include "llvm/CodeGen/MachineLoopInfo.h" 82#include "llvm/CodeGen/MachineOperand.h" 83#include "llvm/CodeGen/MachineRegisterInfo.h" 84#include "llvm/CodeGen/TargetInstrInfo.h" 85#include "llvm/CodeGen/TargetOpcodes.h" 86#include "llvm/CodeGen/TargetRegisterInfo.h" 87#include "llvm/CodeGen/TargetSubtargetInfo.h" 88#include "llvm/MC/LaneBitmask.h" 89#include "llvm/MC/MCInstrDesc.h" 90#include "llvm/Pass.h" 91#include "llvm/Support/CommandLine.h" 92#include "llvm/Support/Debug.h" 93#include "llvm/Support/ErrorHandling.h" 94#include "llvm/Support/raw_ostream.h" 95#include <cassert> 96#include <cstdint> 97#include <memory> 98#include <utility> 99 100using namespace llvm; 101using RegSubRegPair = TargetInstrInfo::RegSubRegPair; 102using RegSubRegPairAndIdx = TargetInstrInfo::RegSubRegPairAndIdx; 103 104#define DEBUG_TYPE "peephole-opt" 105 106// Optimize Extensions 107static cl::opt<bool> 108Aggressive("aggressive-ext-opt", cl::Hidden, 109 cl::desc("Aggressive extension optimization")); 110 111static cl::opt<bool> 112DisablePeephole("disable-peephole", cl::Hidden, cl::init(false), 113 cl::desc("Disable the peephole optimizer")); 114 115/// Specifiy whether or not the value tracking looks through 116/// complex instructions. When this is true, the value tracker 117/// bails on everything that is not a copy or a bitcast. 118static cl::opt<bool> 119DisableAdvCopyOpt("disable-adv-copy-opt", cl::Hidden, cl::init(false), 120 cl::desc("Disable advanced copy optimization")); 121 122static cl::opt<bool> DisableNAPhysCopyOpt( 123 "disable-non-allocatable-phys-copy-opt", cl::Hidden, cl::init(false), 124 cl::desc("Disable non-allocatable physical register copy optimization")); 125 126// Limit the number of PHI instructions to process 127// in PeepholeOptimizer::getNextSource. 128static cl::opt<unsigned> RewritePHILimit( 129 "rewrite-phi-limit", cl::Hidden, cl::init(10), 130 cl::desc("Limit the length of PHI chains to lookup")); 131 132// Limit the length of recurrence chain when evaluating the benefit of 133// commuting operands. 134static cl::opt<unsigned> MaxRecurrenceChain( 135 "recurrence-chain-limit", cl::Hidden, cl::init(3), 136 cl::desc("Maximum length of recurrence chain when evaluating the benefit " 137 "of commuting operands")); 138 139 140STATISTIC(NumReuse, "Number of extension results reused"); 141STATISTIC(NumCmps, "Number of compares eliminated"); 142STATISTIC(NumImmFold, "Number of move immediate folded"); 143STATISTIC(NumLoadFold, "Number of loads folded"); 144STATISTIC(NumSelects, "Number of selects optimized"); 145STATISTIC(NumUncoalescableCopies, "Number of uncoalescable copies optimized"); 146STATISTIC(NumRewrittenCopies, "Number of copies rewritten"); 147STATISTIC(NumNAPhysCopies, "Number of non-allocatable physical copies removed"); 148 149namespace { 150 151 class ValueTrackerResult; 152 class RecurrenceInstr; 153 154 class PeepholeOptimizer : public MachineFunctionPass { 155 const TargetInstrInfo *TII; 156 const TargetRegisterInfo *TRI; 157 MachineRegisterInfo *MRI; 158 MachineDominatorTree *DT; // Machine dominator tree 159 MachineLoopInfo *MLI; 160 161 public: 162 static char ID; // Pass identification 163 164 PeepholeOptimizer() : MachineFunctionPass(ID) { 165 initializePeepholeOptimizerPass(*PassRegistry::getPassRegistry()); 166 } 167 168 bool runOnMachineFunction(MachineFunction &MF) override; 169 170 void getAnalysisUsage(AnalysisUsage &AU) const override { 171 AU.setPreservesCFG(); 172 MachineFunctionPass::getAnalysisUsage(AU); 173 AU.addRequired<MachineLoopInfo>(); 174 AU.addPreserved<MachineLoopInfo>(); 175 if (Aggressive) { 176 AU.addRequired<MachineDominatorTree>(); 177 AU.addPreserved<MachineDominatorTree>(); 178 } 179 } 180 181 /// Track Def -> Use info used for rewriting copies. 182 using RewriteMapTy = SmallDenseMap<RegSubRegPair, ValueTrackerResult>; 183 184 /// Sequence of instructions that formulate recurrence cycle. 185 using RecurrenceCycle = SmallVector<RecurrenceInstr, 4>; 186 187 private: 188 bool optimizeCmpInstr(MachineInstr &MI); 189 bool optimizeExtInstr(MachineInstr &MI, MachineBasicBlock &MBB, 190 SmallPtrSetImpl<MachineInstr*> &LocalMIs); 191 bool optimizeSelect(MachineInstr &MI, 192 SmallPtrSetImpl<MachineInstr *> &LocalMIs); 193 bool optimizeCondBranch(MachineInstr &MI); 194 bool optimizeCoalescableCopy(MachineInstr &MI); 195 bool optimizeUncoalescableCopy(MachineInstr &MI, 196 SmallPtrSetImpl<MachineInstr *> &LocalMIs); 197 bool optimizeRecurrence(MachineInstr &PHI); 198 bool findNextSource(RegSubRegPair RegSubReg, RewriteMapTy &RewriteMap); 199 bool isMoveImmediate(MachineInstr &MI, 200 SmallSet<unsigned, 4> &ImmDefRegs, 201 DenseMap<unsigned, MachineInstr*> &ImmDefMIs); 202 bool foldImmediate(MachineInstr &MI, SmallSet<unsigned, 4> &ImmDefRegs, 203 DenseMap<unsigned, MachineInstr*> &ImmDefMIs); 204 205 /// Finds recurrence cycles, but only ones that formulated around 206 /// a def operand and a use operand that are tied. If there is a use 207 /// operand commutable with the tied use operand, find recurrence cycle 208 /// along that operand as well. 209 bool findTargetRecurrence(unsigned Reg, 210 const SmallSet<unsigned, 2> &TargetReg, 211 RecurrenceCycle &RC); 212 213 /// If copy instruction \p MI is a virtual register copy, track it in 214 /// the set \p CopySrcRegs and \p CopyMIs. If this virtual register was 215 /// previously seen as a copy, replace the uses of this copy with the 216 /// previously seen copy's destination register. 217 bool foldRedundantCopy(MachineInstr &MI, 218 SmallSet<unsigned, 4> &CopySrcRegs, 219 DenseMap<unsigned, MachineInstr *> &CopyMIs); 220 221 /// Is the register \p Reg a non-allocatable physical register? 222 bool isNAPhysCopy(unsigned Reg); 223 224 /// If copy instruction \p MI is a non-allocatable virtual<->physical 225 /// register copy, track it in the \p NAPhysToVirtMIs map. If this 226 /// non-allocatable physical register was previously copied to a virtual 227 /// registered and hasn't been clobbered, the virt->phys copy can be 228 /// deleted. 229 bool foldRedundantNAPhysCopy(MachineInstr &MI, 230 DenseMap<unsigned, MachineInstr *> &NAPhysToVirtMIs); 231 232 bool isLoadFoldable(MachineInstr &MI, 233 SmallSet<unsigned, 16> &FoldAsLoadDefCandidates); 234 235 /// Check whether \p MI is understood by the register coalescer 236 /// but may require some rewriting. 237 bool isCoalescableCopy(const MachineInstr &MI) { 238 // SubregToRegs are not interesting, because they are already register 239 // coalescer friendly. 240 return MI.isCopy() || (!DisableAdvCopyOpt && 241 (MI.isRegSequence() || MI.isInsertSubreg() || 242 MI.isExtractSubreg())); 243 } 244 245 /// Check whether \p MI is a copy like instruction that is 246 /// not recognized by the register coalescer. 247 bool isUncoalescableCopy(const MachineInstr &MI) { 248 return MI.isBitcast() || 249 (!DisableAdvCopyOpt && 250 (MI.isRegSequenceLike() || MI.isInsertSubregLike() || 251 MI.isExtractSubregLike())); 252 } 253 254 MachineInstr &rewriteSource(MachineInstr &CopyLike, 255 RegSubRegPair Def, RewriteMapTy &RewriteMap); 256 }; 257 258 /// Helper class to hold instructions that are inside recurrence cycles. 259 /// The recurrence cycle is formulated around 1) a def operand and its 260 /// tied use operand, or 2) a def operand and a use operand that is commutable 261 /// with another use operand which is tied to the def operand. In the latter 262 /// case, index of the tied use operand and the commutable use operand are 263 /// maintained with CommutePair. 264 class RecurrenceInstr { 265 public: 266 using IndexPair = std::pair<unsigned, unsigned>; 267 268 RecurrenceInstr(MachineInstr *MI) : MI(MI) {} 269 RecurrenceInstr(MachineInstr *MI, unsigned Idx1, unsigned Idx2) 270 : MI(MI), CommutePair(std::make_pair(Idx1, Idx2)) {} 271 272 MachineInstr *getMI() const { return MI; } 273 Optional<IndexPair> getCommutePair() const { return CommutePair; } 274 275 private: 276 MachineInstr *MI; 277 Optional<IndexPair> CommutePair; 278 }; 279 280 /// Helper class to hold a reply for ValueTracker queries. 281 /// Contains the returned sources for a given search and the instructions 282 /// where the sources were tracked from. 283 class ValueTrackerResult { 284 private: 285 /// Track all sources found by one ValueTracker query. 286 SmallVector<RegSubRegPair, 2> RegSrcs; 287 288 /// Instruction using the sources in 'RegSrcs'. 289 const MachineInstr *Inst = nullptr; 290 291 public: 292 ValueTrackerResult() = default; 293 294 ValueTrackerResult(unsigned Reg, unsigned SubReg) { 295 addSource(Reg, SubReg); 296 } 297 298 bool isValid() const { return getNumSources() > 0; } 299 300 void setInst(const MachineInstr *I) { Inst = I; } 301 const MachineInstr *getInst() const { return Inst; } 302 303 void clear() { 304 RegSrcs.clear(); 305 Inst = nullptr; 306 } 307 308 void addSource(unsigned SrcReg, unsigned SrcSubReg) { 309 RegSrcs.push_back(RegSubRegPair(SrcReg, SrcSubReg)); 310 } 311 312 void setSource(int Idx, unsigned SrcReg, unsigned SrcSubReg) { 313 assert(Idx < getNumSources() && "Reg pair source out of index"); 314 RegSrcs[Idx] = RegSubRegPair(SrcReg, SrcSubReg); 315 } 316 317 int getNumSources() const { return RegSrcs.size(); } 318 319 RegSubRegPair getSrc(int Idx) const { 320 return RegSrcs[Idx]; 321 } 322 323 unsigned getSrcReg(int Idx) const { 324 assert(Idx < getNumSources() && "Reg source out of index"); 325 return RegSrcs[Idx].Reg; 326 } 327 328 unsigned getSrcSubReg(int Idx) const { 329 assert(Idx < getNumSources() && "SubReg source out of index"); 330 return RegSrcs[Idx].SubReg; 331 } 332 333 bool operator==(const ValueTrackerResult &Other) { 334 if (Other.getInst() != getInst()) 335 return false; 336 337 if (Other.getNumSources() != getNumSources()) 338 return false; 339 340 for (int i = 0, e = Other.getNumSources(); i != e; ++i) 341 if (Other.getSrcReg(i) != getSrcReg(i) || 342 Other.getSrcSubReg(i) != getSrcSubReg(i)) 343 return false; 344 return true; 345 } 346 }; 347 348 /// Helper class to track the possible sources of a value defined by 349 /// a (chain of) copy related instructions. 350 /// Given a definition (instruction and definition index), this class 351 /// follows the use-def chain to find successive suitable sources. 352 /// The given source can be used to rewrite the definition into 353 /// def = COPY src. 354 /// 355 /// For instance, let us consider the following snippet: 356 /// v0 = 357 /// v2 = INSERT_SUBREG v1, v0, sub0 358 /// def = COPY v2.sub0 359 /// 360 /// Using a ValueTracker for def = COPY v2.sub0 will give the following 361 /// suitable sources: 362 /// v2.sub0 and v0. 363 /// Then, def can be rewritten into def = COPY v0. 364 class ValueTracker { 365 private: 366 /// The current point into the use-def chain. 367 const MachineInstr *Def = nullptr; 368 369 /// The index of the definition in Def. 370 unsigned DefIdx = 0; 371 372 /// The sub register index of the definition. 373 unsigned DefSubReg; 374 375 /// The register where the value can be found. 376 unsigned Reg; 377 378 /// MachineRegisterInfo used to perform tracking. 379 const MachineRegisterInfo &MRI; 380 381 /// Optional TargetInstrInfo used to perform some complex tracking. 382 const TargetInstrInfo *TII; 383 384 /// Dispatcher to the right underlying implementation of getNextSource. 385 ValueTrackerResult getNextSourceImpl(); 386 387 /// Specialized version of getNextSource for Copy instructions. 388 ValueTrackerResult getNextSourceFromCopy(); 389 390 /// Specialized version of getNextSource for Bitcast instructions. 391 ValueTrackerResult getNextSourceFromBitcast(); 392 393 /// Specialized version of getNextSource for RegSequence instructions. 394 ValueTrackerResult getNextSourceFromRegSequence(); 395 396 /// Specialized version of getNextSource for InsertSubreg instructions. 397 ValueTrackerResult getNextSourceFromInsertSubreg(); 398 399 /// Specialized version of getNextSource for ExtractSubreg instructions. 400 ValueTrackerResult getNextSourceFromExtractSubreg(); 401 402 /// Specialized version of getNextSource for SubregToReg instructions. 403 ValueTrackerResult getNextSourceFromSubregToReg(); 404 405 /// Specialized version of getNextSource for PHI instructions. 406 ValueTrackerResult getNextSourceFromPHI(); 407 408 public: 409 /// Create a ValueTracker instance for the value defined by \p Reg. 410 /// \p DefSubReg represents the sub register index the value tracker will 411 /// track. It does not need to match the sub register index used in the 412 /// definition of \p Reg. 413 /// If \p Reg is a physical register, a value tracker constructed with 414 /// this constructor will not find any alternative source. 415 /// Indeed, when \p Reg is a physical register that constructor does not 416 /// know which definition of \p Reg it should track. 417 /// Use the next constructor to track a physical register. 418 ValueTracker(unsigned Reg, unsigned DefSubReg, 419 const MachineRegisterInfo &MRI, 420 const TargetInstrInfo *TII = nullptr) 421 : DefSubReg(DefSubReg), Reg(Reg), MRI(MRI), TII(TII) { 422 if (!TargetRegisterInfo::isPhysicalRegister(Reg)) { 423 Def = MRI.getVRegDef(Reg); 424 DefIdx = MRI.def_begin(Reg).getOperandNo(); 425 } 426 } 427 428 /// Following the use-def chain, get the next available source 429 /// for the tracked value. 430 /// \return A ValueTrackerResult containing a set of registers 431 /// and sub registers with tracked values. A ValueTrackerResult with 432 /// an empty set of registers means no source was found. 433 ValueTrackerResult getNextSource(); 434 }; 435 436} // end anonymous namespace 437 438char PeepholeOptimizer::ID = 0; 439 440char &llvm::PeepholeOptimizerID = PeepholeOptimizer::ID; 441 442INITIALIZE_PASS_BEGIN(PeepholeOptimizer, DEBUG_TYPE, 443 "Peephole Optimizations", false, false) 444INITIALIZE_PASS_DEPENDENCY(MachineDominatorTree) 445INITIALIZE_PASS_DEPENDENCY(MachineLoopInfo) 446INITIALIZE_PASS_END(PeepholeOptimizer, DEBUG_TYPE, 447 "Peephole Optimizations", false, false) 448 449/// If instruction is a copy-like instruction, i.e. it reads a single register 450/// and writes a single register and it does not modify the source, and if the 451/// source value is preserved as a sub-register of the result, then replace all 452/// reachable uses of the source with the subreg of the result. 453/// 454/// Do not generate an EXTRACT that is used only in a debug use, as this changes 455/// the code. Since this code does not currently share EXTRACTs, just ignore all 456/// debug uses. 457bool PeepholeOptimizer:: 458optimizeExtInstr(MachineInstr &MI, MachineBasicBlock &MBB, 459 SmallPtrSetImpl<MachineInstr*> &LocalMIs) { 460 unsigned SrcReg, DstReg, SubIdx; 461 if (!TII->isCoalescableExtInstr(MI, SrcReg, DstReg, SubIdx)) 462 return false; 463 464 if (TargetRegisterInfo::isPhysicalRegister(DstReg) || 465 TargetRegisterInfo::isPhysicalRegister(SrcReg)) 466 return false; 467 468 if (MRI->hasOneNonDBGUse(SrcReg)) 469 // No other uses. 470 return false; 471 472 // Ensure DstReg can get a register class that actually supports 473 // sub-registers. Don't change the class until we commit. 474 const TargetRegisterClass *DstRC = MRI->getRegClass(DstReg); 475 DstRC = TRI->getSubClassWithSubReg(DstRC, SubIdx); 476 if (!DstRC) 477 return false; 478 479 // The ext instr may be operating on a sub-register of SrcReg as well. 480 // PPC::EXTSW is a 32 -> 64-bit sign extension, but it reads a 64-bit 481 // register. 482 // If UseSrcSubIdx is Set, SubIdx also applies to SrcReg, and only uses of 483 // SrcReg:SubIdx should be replaced. 484 bool UseSrcSubIdx = 485 TRI->getSubClassWithSubReg(MRI->getRegClass(SrcReg), SubIdx) != nullptr; 486 487 // The source has other uses. See if we can replace the other uses with use of 488 // the result of the extension. 489 SmallPtrSet<MachineBasicBlock*, 4> ReachedBBs; 490 for (MachineInstr &UI : MRI->use_nodbg_instructions(DstReg)) 491 ReachedBBs.insert(UI.getParent()); 492 493 // Uses that are in the same BB of uses of the result of the instruction. 494 SmallVector<MachineOperand*, 8> Uses; 495 496 // Uses that the result of the instruction can reach. 497 SmallVector<MachineOperand*, 8> ExtendedUses; 498 499 bool ExtendLife = true; 500 for (MachineOperand &UseMO : MRI->use_nodbg_operands(SrcReg)) { 501 MachineInstr *UseMI = UseMO.getParent(); 502 if (UseMI == &MI) 503 continue; 504 505 if (UseMI->isPHI()) { 506 ExtendLife = false; 507 continue; 508 } 509 510 // Only accept uses of SrcReg:SubIdx. 511 if (UseSrcSubIdx && UseMO.getSubReg() != SubIdx) 512 continue; 513 514 // It's an error to translate this: 515 // 516 // %reg1025 = <sext> %reg1024 517 // ... 518 // %reg1026 = SUBREG_TO_REG 0, %reg1024, 4 519 // 520 // into this: 521 // 522 // %reg1025 = <sext> %reg1024 523 // ... 524 // %reg1027 = COPY %reg1025:4 525 // %reg1026 = SUBREG_TO_REG 0, %reg1027, 4 526 // 527 // The problem here is that SUBREG_TO_REG is there to assert that an 528 // implicit zext occurs. It doesn't insert a zext instruction. If we allow 529 // the COPY here, it will give us the value after the <sext>, not the 530 // original value of %reg1024 before <sext>. 531 if (UseMI->getOpcode() == TargetOpcode::SUBREG_TO_REG) 532 continue; 533 534 MachineBasicBlock *UseMBB = UseMI->getParent(); 535 if (UseMBB == &MBB) { 536 // Local uses that come after the extension. 537 if (!LocalMIs.count(UseMI)) 538 Uses.push_back(&UseMO); 539 } else if (ReachedBBs.count(UseMBB)) { 540 // Non-local uses where the result of the extension is used. Always 541 // replace these unless it's a PHI. 542 Uses.push_back(&UseMO); 543 } else if (Aggressive && DT->dominates(&MBB, UseMBB)) { 544 // We may want to extend the live range of the extension result in order 545 // to replace these uses. 546 ExtendedUses.push_back(&UseMO); 547 } else { 548 // Both will be live out of the def MBB anyway. Don't extend live range of 549 // the extension result. 550 ExtendLife = false; 551 break; 552 } 553 } 554 555 if (ExtendLife && !ExtendedUses.empty()) 556 // Extend the liveness of the extension result. 557 Uses.append(ExtendedUses.begin(), ExtendedUses.end()); 558 559 // Now replace all uses. 560 bool Changed = false; 561 if (!Uses.empty()) { 562 SmallPtrSet<MachineBasicBlock*, 4> PHIBBs; 563 564 // Look for PHI uses of the extended result, we don't want to extend the 565 // liveness of a PHI input. It breaks all kinds of assumptions down 566 // stream. A PHI use is expected to be the kill of its source values. 567 for (MachineInstr &UI : MRI->use_nodbg_instructions(DstReg)) 568 if (UI.isPHI()) 569 PHIBBs.insert(UI.getParent()); 570 571 const TargetRegisterClass *RC = MRI->getRegClass(SrcReg); 572 for (unsigned i = 0, e = Uses.size(); i != e; ++i) { 573 MachineOperand *UseMO = Uses[i]; 574 MachineInstr *UseMI = UseMO->getParent(); 575 MachineBasicBlock *UseMBB = UseMI->getParent(); 576 if (PHIBBs.count(UseMBB)) 577 continue; 578 579 // About to add uses of DstReg, clear DstReg's kill flags. 580 if (!Changed) { 581 MRI->clearKillFlags(DstReg); 582 MRI->constrainRegClass(DstReg, DstRC); 583 } 584 585 unsigned NewVR = MRI->createVirtualRegister(RC); 586 MachineInstr *Copy = BuildMI(*UseMBB, UseMI, UseMI->getDebugLoc(), 587 TII->get(TargetOpcode::COPY), NewVR) 588 .addReg(DstReg, 0, SubIdx); 589 // SubIdx applies to both SrcReg and DstReg when UseSrcSubIdx is set. 590 if (UseSrcSubIdx) { 591 Copy->getOperand(0).setSubReg(SubIdx); 592 Copy->getOperand(0).setIsUndef(); 593 } 594 UseMO->setReg(NewVR); 595 ++NumReuse; 596 Changed = true; 597 } 598 } 599 600 return Changed; 601} 602 603/// If the instruction is a compare and the previous instruction it's comparing 604/// against already sets (or could be modified to set) the same flag as the 605/// compare, then we can remove the comparison and use the flag from the 606/// previous instruction. 607bool PeepholeOptimizer::optimizeCmpInstr(MachineInstr &MI) { 608 // If this instruction is a comparison against zero and isn't comparing a 609 // physical register, we can try to optimize it. 610 unsigned SrcReg, SrcReg2; 611 int CmpMask, CmpValue; 612 if (!TII->analyzeCompare(MI, SrcReg, SrcReg2, CmpMask, CmpValue) || 613 TargetRegisterInfo::isPhysicalRegister(SrcReg) || 614 (SrcReg2 != 0 && TargetRegisterInfo::isPhysicalRegister(SrcReg2))) 615 return false; 616 617 // Attempt to optimize the comparison instruction. 618 if (TII->optimizeCompareInstr(MI, SrcReg, SrcReg2, CmpMask, CmpValue, MRI)) { 619 ++NumCmps; 620 return true; 621 } 622 623 return false; 624} 625 626/// Optimize a select instruction. 627bool PeepholeOptimizer::optimizeSelect(MachineInstr &MI, 628 SmallPtrSetImpl<MachineInstr *> &LocalMIs) { 629 unsigned TrueOp = 0; 630 unsigned FalseOp = 0; 631 bool Optimizable = false; 632 SmallVector<MachineOperand, 4> Cond; 633 if (TII->analyzeSelect(MI, Cond, TrueOp, FalseOp, Optimizable)) 634 return false; 635 if (!Optimizable) 636 return false; 637 if (!TII->optimizeSelect(MI, LocalMIs)) 638 return false; 639 MI.eraseFromParent(); 640 ++NumSelects; 641 return true; 642} 643 644/// Check if a simpler conditional branch can be generated. 645bool PeepholeOptimizer::optimizeCondBranch(MachineInstr &MI) { 646 return TII->optimizeCondBranch(MI); 647} 648 649/// Try to find the next source that share the same register file 650/// for the value defined by \p Reg and \p SubReg. 651/// When true is returned, the \p RewriteMap can be used by the client to 652/// retrieve all Def -> Use along the way up to the next source. Any found 653/// Use that is not itself a key for another entry, is the next source to 654/// use. During the search for the next source, multiple sources can be found 655/// given multiple incoming sources of a PHI instruction. In this case, we 656/// look in each PHI source for the next source; all found next sources must 657/// share the same register file as \p Reg and \p SubReg. The client should 658/// then be capable to rewrite all intermediate PHIs to get the next source. 659/// \return False if no alternative sources are available. True otherwise. 660bool PeepholeOptimizer::findNextSource(RegSubRegPair RegSubReg, 661 RewriteMapTy &RewriteMap) { 662 // Do not try to find a new source for a physical register. 663 // So far we do not have any motivating example for doing that. 664 // Thus, instead of maintaining untested code, we will revisit that if 665 // that changes at some point. 666 unsigned Reg = RegSubReg.Reg; 667 if (TargetRegisterInfo::isPhysicalRegister(Reg)) 668 return false; 669 const TargetRegisterClass *DefRC = MRI->getRegClass(Reg); 670 671 SmallVector<RegSubRegPair, 4> SrcToLook; 672 RegSubRegPair CurSrcPair = RegSubReg; 673 SrcToLook.push_back(CurSrcPair); 674 675 unsigned PHICount = 0; 676 do { 677 CurSrcPair = SrcToLook.pop_back_val(); 678 // As explained above, do not handle physical registers 679 if (TargetRegisterInfo::isPhysicalRegister(CurSrcPair.Reg)) 680 return false; 681 682 ValueTracker ValTracker(CurSrcPair.Reg, CurSrcPair.SubReg, *MRI, TII); 683 684 // Follow the chain of copies until we find a more suitable source, a phi 685 // or have to abort. 686 while (true) { 687 ValueTrackerResult Res = ValTracker.getNextSource(); 688 // Abort at the end of a chain (without finding a suitable source). 689 if (!Res.isValid()) 690 return false; 691 692 // Insert the Def -> Use entry for the recently found source. 693 ValueTrackerResult CurSrcRes = RewriteMap.lookup(CurSrcPair); 694 if (CurSrcRes.isValid()) { 695 assert(CurSrcRes == Res && "ValueTrackerResult found must match"); 696 // An existent entry with multiple sources is a PHI cycle we must avoid. 697 // Otherwise it's an entry with a valid next source we already found. 698 if (CurSrcRes.getNumSources() > 1) { 699 LLVM_DEBUG(dbgs() 700 << "findNextSource: found PHI cycle, aborting...\n"); 701 return false; 702 } 703 break; 704 } 705 RewriteMap.insert(std::make_pair(CurSrcPair, Res)); 706 707 // ValueTrackerResult usually have one source unless it's the result from 708 // a PHI instruction. Add the found PHI edges to be looked up further. 709 unsigned NumSrcs = Res.getNumSources(); 710 if (NumSrcs > 1) { 711 PHICount++; 712 if (PHICount >= RewritePHILimit) { 713 LLVM_DEBUG(dbgs() << "findNextSource: PHI limit reached\n"); 714 return false; 715 } 716 717 for (unsigned i = 0; i < NumSrcs; ++i) 718 SrcToLook.push_back(Res.getSrc(i)); 719 break; 720 } 721 722 CurSrcPair = Res.getSrc(0); 723 // Do not extend the live-ranges of physical registers as they add 724 // constraints to the register allocator. Moreover, if we want to extend 725 // the live-range of a physical register, unlike SSA virtual register, 726 // we will have to check that they aren't redefine before the related use. 727 if (TargetRegisterInfo::isPhysicalRegister(CurSrcPair.Reg)) 728 return false; 729 730 // Keep following the chain if the value isn't any better yet. 731 const TargetRegisterClass *SrcRC = MRI->getRegClass(CurSrcPair.Reg); 732 if (!TRI->shouldRewriteCopySrc(DefRC, RegSubReg.SubReg, SrcRC, 733 CurSrcPair.SubReg)) 734 continue; 735 736 // We currently cannot deal with subreg operands on PHI instructions 737 // (see insertPHI()). 738 if (PHICount > 0 && CurSrcPair.SubReg != 0) 739 continue; 740 741 // We found a suitable source, and are done with this chain. 742 break; 743 } 744 } while (!SrcToLook.empty()); 745 746 // If we did not find a more suitable source, there is nothing to optimize. 747 return CurSrcPair.Reg != Reg; 748} 749 750/// Insert a PHI instruction with incoming edges \p SrcRegs that are 751/// guaranteed to have the same register class. This is necessary whenever we 752/// successfully traverse a PHI instruction and find suitable sources coming 753/// from its edges. By inserting a new PHI, we provide a rewritten PHI def 754/// suitable to be used in a new COPY instruction. 755static MachineInstr & 756insertPHI(MachineRegisterInfo &MRI, const TargetInstrInfo &TII, 757 const SmallVectorImpl<RegSubRegPair> &SrcRegs, 758 MachineInstr &OrigPHI) { 759 assert(!SrcRegs.empty() && "No sources to create a PHI instruction?"); 760 761 const TargetRegisterClass *NewRC = MRI.getRegClass(SrcRegs[0].Reg); 762 // NewRC is only correct if no subregisters are involved. findNextSource() 763 // should have rejected those cases already. 764 assert(SrcRegs[0].SubReg == 0 && "should not have subreg operand"); 765 unsigned NewVR = MRI.createVirtualRegister(NewRC); 766 MachineBasicBlock *MBB = OrigPHI.getParent(); 767 MachineInstrBuilder MIB = BuildMI(*MBB, &OrigPHI, OrigPHI.getDebugLoc(), 768 TII.get(TargetOpcode::PHI), NewVR); 769 770 unsigned MBBOpIdx = 2; 771 for (const RegSubRegPair &RegPair : SrcRegs) { 772 MIB.addReg(RegPair.Reg, 0, RegPair.SubReg); 773 MIB.addMBB(OrigPHI.getOperand(MBBOpIdx).getMBB()); 774 // Since we're extended the lifetime of RegPair.Reg, clear the 775 // kill flags to account for that and make RegPair.Reg reaches 776 // the new PHI. 777 MRI.clearKillFlags(RegPair.Reg); 778 MBBOpIdx += 2; 779 } 780 781 return *MIB; 782} 783 784namespace { 785 786/// Interface to query instructions amenable to copy rewriting. 787class Rewriter { 788protected: 789 MachineInstr &CopyLike; 790 unsigned CurrentSrcIdx = 0; ///< The index of the source being rewritten. 791public: 792 Rewriter(MachineInstr &CopyLike) : CopyLike(CopyLike) {} 793 virtual ~Rewriter() {} 794 795 /// Get the next rewritable source (SrcReg, SrcSubReg) and 796 /// the related value that it affects (DstReg, DstSubReg). 797 /// A source is considered rewritable if its register class and the 798 /// register class of the related DstReg may not be register 799 /// coalescer friendly. In other words, given a copy-like instruction 800 /// not all the arguments may be returned at rewritable source, since 801 /// some arguments are none to be register coalescer friendly. 802 /// 803 /// Each call of this method moves the current source to the next 804 /// rewritable source. 805 /// For instance, let CopyLike be the instruction to rewrite. 806 /// CopyLike has one definition and one source: 807 /// dst.dstSubIdx = CopyLike src.srcSubIdx. 808 /// 809 /// The first call will give the first rewritable source, i.e., 810 /// the only source this instruction has: 811 /// (SrcReg, SrcSubReg) = (src, srcSubIdx). 812 /// This source defines the whole definition, i.e., 813 /// (DstReg, DstSubReg) = (dst, dstSubIdx). 814 /// 815 /// The second and subsequent calls will return false, as there is only one 816 /// rewritable source. 817 /// 818 /// \return True if a rewritable source has been found, false otherwise. 819 /// The output arguments are valid if and only if true is returned. 820 virtual bool getNextRewritableSource(RegSubRegPair &Src, 821 RegSubRegPair &Dst) = 0; 822 823 /// Rewrite the current source with \p NewReg and \p NewSubReg if possible. 824 /// \return True if the rewriting was possible, false otherwise. 825 virtual bool RewriteCurrentSource(unsigned NewReg, unsigned NewSubReg) = 0; 826}; 827 828/// Rewriter for COPY instructions. 829class CopyRewriter : public Rewriter { 830public: 831 CopyRewriter(MachineInstr &MI) : Rewriter(MI) { 832 assert(MI.isCopy() && "Expected copy instruction"); 833 } 834 virtual ~CopyRewriter() = default; 835 836 bool getNextRewritableSource(RegSubRegPair &Src, 837 RegSubRegPair &Dst) override { 838 // CurrentSrcIdx > 0 means this function has already been called. 839 if (CurrentSrcIdx > 0) 840 return false; 841 // This is the first call to getNextRewritableSource. 842 // Move the CurrentSrcIdx to remember that we made that call. 843 CurrentSrcIdx = 1; 844 // The rewritable source is the argument. 845 const MachineOperand &MOSrc = CopyLike.getOperand(1); 846 Src = RegSubRegPair(MOSrc.getReg(), MOSrc.getSubReg()); 847 // What we track are the alternative sources of the definition. 848 const MachineOperand &MODef = CopyLike.getOperand(0); 849 Dst = RegSubRegPair(MODef.getReg(), MODef.getSubReg()); 850 return true; 851 } 852 853 bool RewriteCurrentSource(unsigned NewReg, unsigned NewSubReg) override { 854 if (CurrentSrcIdx != 1) 855 return false; 856 MachineOperand &MOSrc = CopyLike.getOperand(CurrentSrcIdx); 857 MOSrc.setReg(NewReg); 858 MOSrc.setSubReg(NewSubReg); 859 return true; 860 } 861}; 862 863/// Helper class to rewrite uncoalescable copy like instructions 864/// into new COPY (coalescable friendly) instructions. 865class UncoalescableRewriter : public Rewriter { 866 unsigned NumDefs; ///< Number of defs in the bitcast. 867 868public: 869 UncoalescableRewriter(MachineInstr &MI) : Rewriter(MI) { 870 NumDefs = MI.getDesc().getNumDefs(); 871 } 872 873 /// \see See Rewriter::getNextRewritableSource() 874 /// All such sources need to be considered rewritable in order to 875 /// rewrite a uncoalescable copy-like instruction. This method return 876 /// each definition that must be checked if rewritable. 877 bool getNextRewritableSource(RegSubRegPair &Src, 878 RegSubRegPair &Dst) override { 879 // Find the next non-dead definition and continue from there. 880 if (CurrentSrcIdx == NumDefs) 881 return false; 882 883 while (CopyLike.getOperand(CurrentSrcIdx).isDead()) { 884 ++CurrentSrcIdx; 885 if (CurrentSrcIdx == NumDefs) 886 return false; 887 } 888 889 // What we track are the alternative sources of the definition. 890 Src = RegSubRegPair(0, 0); 891 const MachineOperand &MODef = CopyLike.getOperand(CurrentSrcIdx); 892 Dst = RegSubRegPair(MODef.getReg(), MODef.getSubReg()); 893 894 CurrentSrcIdx++; 895 return true; 896 } 897 898 bool RewriteCurrentSource(unsigned NewReg, unsigned NewSubReg) override { 899 return false; 900 } 901}; 902 903/// Specialized rewriter for INSERT_SUBREG instruction. 904class InsertSubregRewriter : public Rewriter { 905public: 906 InsertSubregRewriter(MachineInstr &MI) : Rewriter(MI) { 907 assert(MI.isInsertSubreg() && "Invalid instruction"); 908 } 909 910 /// \see See Rewriter::getNextRewritableSource() 911 /// Here CopyLike has the following form: 912 /// dst = INSERT_SUBREG Src1, Src2.src2SubIdx, subIdx. 913 /// Src1 has the same register class has dst, hence, there is 914 /// nothing to rewrite. 915 /// Src2.src2SubIdx, may not be register coalescer friendly. 916 /// Therefore, the first call to this method returns: 917 /// (SrcReg, SrcSubReg) = (Src2, src2SubIdx). 918 /// (DstReg, DstSubReg) = (dst, subIdx). 919 /// 920 /// Subsequence calls will return false. 921 bool getNextRewritableSource(RegSubRegPair &Src, 922 RegSubRegPair &Dst) override { 923 // If we already get the only source we can rewrite, return false. 924 if (CurrentSrcIdx == 2) 925 return false; 926 // We are looking at v2 = INSERT_SUBREG v0, v1, sub0. 927 CurrentSrcIdx = 2; 928 const MachineOperand &MOInsertedReg = CopyLike.getOperand(2); 929 Src = RegSubRegPair(MOInsertedReg.getReg(), MOInsertedReg.getSubReg()); 930 const MachineOperand &MODef = CopyLike.getOperand(0); 931 932 // We want to track something that is compatible with the 933 // partial definition. 934 if (MODef.getSubReg()) 935 // Bail if we have to compose sub-register indices. 936 return false; 937 Dst = RegSubRegPair(MODef.getReg(), 938 (unsigned)CopyLike.getOperand(3).getImm()); 939 return true; 940 } 941 942 bool RewriteCurrentSource(unsigned NewReg, unsigned NewSubReg) override { 943 if (CurrentSrcIdx != 2) 944 return false; 945 // We are rewriting the inserted reg. 946 MachineOperand &MO = CopyLike.getOperand(CurrentSrcIdx); 947 MO.setReg(NewReg); 948 MO.setSubReg(NewSubReg); 949 return true; 950 } 951}; 952 953/// Specialized rewriter for EXTRACT_SUBREG instruction. 954class ExtractSubregRewriter : public Rewriter { 955 const TargetInstrInfo &TII; 956 957public: 958 ExtractSubregRewriter(MachineInstr &MI, const TargetInstrInfo &TII) 959 : Rewriter(MI), TII(TII) { 960 assert(MI.isExtractSubreg() && "Invalid instruction"); 961 } 962 963 /// \see Rewriter::getNextRewritableSource() 964 /// Here CopyLike has the following form: 965 /// dst.dstSubIdx = EXTRACT_SUBREG Src, subIdx. 966 /// There is only one rewritable source: Src.subIdx, 967 /// which defines dst.dstSubIdx. 968 bool getNextRewritableSource(RegSubRegPair &Src, 969 RegSubRegPair &Dst) override { 970 // If we already get the only source we can rewrite, return false. 971 if (CurrentSrcIdx == 1) 972 return false; 973 // We are looking at v1 = EXTRACT_SUBREG v0, sub0. 974 CurrentSrcIdx = 1; 975 const MachineOperand &MOExtractedReg = CopyLike.getOperand(1); 976 // If we have to compose sub-register indices, bail out. 977 if (MOExtractedReg.getSubReg()) 978 return false; 979 980 Src = RegSubRegPair(MOExtractedReg.getReg(), 981 CopyLike.getOperand(2).getImm()); 982 983 // We want to track something that is compatible with the definition. 984 const MachineOperand &MODef = CopyLike.getOperand(0); 985 Dst = RegSubRegPair(MODef.getReg(), MODef.getSubReg()); 986 return true; 987 } 988 989 bool RewriteCurrentSource(unsigned NewReg, unsigned NewSubReg) override { 990 // The only source we can rewrite is the input register. 991 if (CurrentSrcIdx != 1) 992 return false; 993 994 CopyLike.getOperand(CurrentSrcIdx).setReg(NewReg); 995 996 // If we find a source that does not require to extract something, 997 // rewrite the operation with a copy. 998 if (!NewSubReg) { 999 // Move the current index to an invalid position. 1000 // We do not want another call to this method to be able 1001 // to do any change. 1002 CurrentSrcIdx = -1; 1003 // Rewrite the operation as a COPY. 1004 // Get rid of the sub-register index. 1005 CopyLike.RemoveOperand(2); 1006 // Morph the operation into a COPY. 1007 CopyLike.setDesc(TII.get(TargetOpcode::COPY)); 1008 return true; 1009 } 1010 CopyLike.getOperand(CurrentSrcIdx + 1).setImm(NewSubReg); 1011 return true; 1012 } 1013}; 1014 1015/// Specialized rewriter for REG_SEQUENCE instruction. 1016class RegSequenceRewriter : public Rewriter { 1017public: 1018 RegSequenceRewriter(MachineInstr &MI) : Rewriter(MI) { 1019 assert(MI.isRegSequence() && "Invalid instruction"); 1020 } 1021 1022 /// \see Rewriter::getNextRewritableSource() 1023 /// Here CopyLike has the following form: 1024 /// dst = REG_SEQUENCE Src1.src1SubIdx, subIdx1, Src2.src2SubIdx, subIdx2. 1025 /// Each call will return a different source, walking all the available 1026 /// source. 1027 /// 1028 /// The first call returns: 1029 /// (SrcReg, SrcSubReg) = (Src1, src1SubIdx). 1030 /// (DstReg, DstSubReg) = (dst, subIdx1). 1031 /// 1032 /// The second call returns: 1033 /// (SrcReg, SrcSubReg) = (Src2, src2SubIdx). 1034 /// (DstReg, DstSubReg) = (dst, subIdx2). 1035 /// 1036 /// And so on, until all the sources have been traversed, then 1037 /// it returns false. 1038 bool getNextRewritableSource(RegSubRegPair &Src, 1039 RegSubRegPair &Dst) override { 1040 // We are looking at v0 = REG_SEQUENCE v1, sub1, v2, sub2, etc. 1041 1042 // If this is the first call, move to the first argument. 1043 if (CurrentSrcIdx == 0) { 1044 CurrentSrcIdx = 1; 1045 } else { 1046 // Otherwise, move to the next argument and check that it is valid. 1047 CurrentSrcIdx += 2; 1048 if (CurrentSrcIdx >= CopyLike.getNumOperands()) 1049 return false; 1050 } 1051 const MachineOperand &MOInsertedReg = CopyLike.getOperand(CurrentSrcIdx); 1052 Src.Reg = MOInsertedReg.getReg(); 1053 // If we have to compose sub-register indices, bail out. 1054 if ((Src.SubReg = MOInsertedReg.getSubReg())) 1055 return false; 1056 1057 // We want to track something that is compatible with the related 1058 // partial definition. 1059 Dst.SubReg = CopyLike.getOperand(CurrentSrcIdx + 1).getImm(); 1060 1061 const MachineOperand &MODef = CopyLike.getOperand(0); 1062 Dst.Reg = MODef.getReg(); 1063 // If we have to compose sub-registers, bail. 1064 return MODef.getSubReg() == 0; 1065 } 1066 1067 bool RewriteCurrentSource(unsigned NewReg, unsigned NewSubReg) override { 1068 // We cannot rewrite out of bound operands. 1069 // Moreover, rewritable sources are at odd positions. 1070 if ((CurrentSrcIdx & 1) != 1 || CurrentSrcIdx > CopyLike.getNumOperands()) 1071 return false; 1072 1073 MachineOperand &MO = CopyLike.getOperand(CurrentSrcIdx); 1074 MO.setReg(NewReg); 1075 MO.setSubReg(NewSubReg); 1076 return true; 1077 } 1078}; 1079 1080} // end anonymous namespace 1081 1082/// Get the appropriated Rewriter for \p MI. 1083/// \return A pointer to a dynamically allocated Rewriter or nullptr if no 1084/// rewriter works for \p MI. 1085static Rewriter *getCopyRewriter(MachineInstr &MI, const TargetInstrInfo &TII) { 1086 // Handle uncoalescable copy-like instructions. 1087 if (MI.isBitcast() || MI.isRegSequenceLike() || MI.isInsertSubregLike() || 1088 MI.isExtractSubregLike()) 1089 return new UncoalescableRewriter(MI); 1090 1091 switch (MI.getOpcode()) { 1092 default: 1093 return nullptr; 1094 case TargetOpcode::COPY: 1095 return new CopyRewriter(MI); 1096 case TargetOpcode::INSERT_SUBREG: 1097 return new InsertSubregRewriter(MI); 1098 case TargetOpcode::EXTRACT_SUBREG: 1099 return new ExtractSubregRewriter(MI, TII); 1100 case TargetOpcode::REG_SEQUENCE: 1101 return new RegSequenceRewriter(MI); 1102 } 1103} 1104 1105/// Given a \p Def.Reg and Def.SubReg pair, use \p RewriteMap to find 1106/// the new source to use for rewrite. If \p HandleMultipleSources is true and 1107/// multiple sources for a given \p Def are found along the way, we found a 1108/// PHI instructions that needs to be rewritten. 1109/// TODO: HandleMultipleSources should be removed once we test PHI handling 1110/// with coalescable copies. 1111static RegSubRegPair 1112getNewSource(MachineRegisterInfo *MRI, const TargetInstrInfo *TII, 1113 RegSubRegPair Def, 1114 const PeepholeOptimizer::RewriteMapTy &RewriteMap, 1115 bool HandleMultipleSources = true) { 1116 RegSubRegPair LookupSrc(Def.Reg, Def.SubReg); 1117 while (true) { 1118 ValueTrackerResult Res = RewriteMap.lookup(LookupSrc); 1119 // If there are no entries on the map, LookupSrc is the new source. 1120 if (!Res.isValid()) 1121 return LookupSrc; 1122 1123 // There's only one source for this definition, keep searching... 1124 unsigned NumSrcs = Res.getNumSources(); 1125 if (NumSrcs == 1) { 1126 LookupSrc.Reg = Res.getSrcReg(0); 1127 LookupSrc.SubReg = Res.getSrcSubReg(0); 1128 continue; 1129 } 1130 1131 // TODO: Remove once multiple srcs w/ coalescable copies are supported. 1132 if (!HandleMultipleSources) 1133 break; 1134 1135 // Multiple sources, recurse into each source to find a new source 1136 // for it. Then, rewrite the PHI accordingly to its new edges. 1137 SmallVector<RegSubRegPair, 4> NewPHISrcs; 1138 for (unsigned i = 0; i < NumSrcs; ++i) { 1139 RegSubRegPair PHISrc(Res.getSrcReg(i), Res.getSrcSubReg(i)); 1140 NewPHISrcs.push_back( 1141 getNewSource(MRI, TII, PHISrc, RewriteMap, HandleMultipleSources)); 1142 } 1143 1144 // Build the new PHI node and return its def register as the new source. 1145 MachineInstr &OrigPHI = const_cast<MachineInstr &>(*Res.getInst()); 1146 MachineInstr &NewPHI = insertPHI(*MRI, *TII, NewPHISrcs, OrigPHI); 1147 LLVM_DEBUG(dbgs() << "-- getNewSource\n"); 1148 LLVM_DEBUG(dbgs() << " Replacing: " << OrigPHI); 1149 LLVM_DEBUG(dbgs() << " With: " << NewPHI); 1150 const MachineOperand &MODef = NewPHI.getOperand(0); 1151 return RegSubRegPair(MODef.getReg(), MODef.getSubReg()); 1152 } 1153 1154 return RegSubRegPair(0, 0); 1155} 1156 1157/// Optimize generic copy instructions to avoid cross register bank copy. 1158/// The optimization looks through a chain of copies and tries to find a source 1159/// that has a compatible register class. 1160/// Two register classes are considered to be compatible if they share the same 1161/// register bank. 1162/// New copies issued by this optimization are register allocator 1163/// friendly. This optimization does not remove any copy as it may 1164/// overconstrain the register allocator, but replaces some operands 1165/// when possible. 1166/// \pre isCoalescableCopy(*MI) is true. 1167/// \return True, when \p MI has been rewritten. False otherwise. 1168bool PeepholeOptimizer::optimizeCoalescableCopy(MachineInstr &MI) { 1169 assert(isCoalescableCopy(MI) && "Invalid argument"); 1170 assert(MI.getDesc().getNumDefs() == 1 && 1171 "Coalescer can understand multiple defs?!"); 1172 const MachineOperand &MODef = MI.getOperand(0); 1173 // Do not rewrite physical definitions. 1174 if (TargetRegisterInfo::isPhysicalRegister(MODef.getReg())) 1175 return false; 1176 1177 bool Changed = false; 1178 // Get the right rewriter for the current copy. 1179 std::unique_ptr<Rewriter> CpyRewriter(getCopyRewriter(MI, *TII)); 1180 // If none exists, bail out. 1181 if (!CpyRewriter) 1182 return false; 1183 // Rewrite each rewritable source. 1184 RegSubRegPair Src; 1185 RegSubRegPair TrackPair; 1186 while (CpyRewriter->getNextRewritableSource(Src, TrackPair)) { 1187 // Keep track of PHI nodes and its incoming edges when looking for sources. 1188 RewriteMapTy RewriteMap; 1189 // Try to find a more suitable source. If we failed to do so, or get the 1190 // actual source, move to the next source. 1191 if (!findNextSource(TrackPair, RewriteMap)) 1192 continue; 1193 1194 // Get the new source to rewrite. TODO: Only enable handling of multiple 1195 // sources (PHIs) once we have a motivating example and testcases for it. 1196 RegSubRegPair NewSrc = getNewSource(MRI, TII, TrackPair, RewriteMap, 1197 /*HandleMultipleSources=*/false); 1198 if (Src.Reg == NewSrc.Reg || NewSrc.Reg == 0) 1199 continue; 1200 1201 // Rewrite source. 1202 if (CpyRewriter->RewriteCurrentSource(NewSrc.Reg, NewSrc.SubReg)) { 1203 // We may have extended the live-range of NewSrc, account for that. 1204 MRI->clearKillFlags(NewSrc.Reg); 1205 Changed = true; 1206 } 1207 } 1208 // TODO: We could have a clean-up method to tidy the instruction. 1209 // E.g., v0 = INSERT_SUBREG v1, v1.sub0, sub0 1210 // => v0 = COPY v1 1211 // Currently we haven't seen motivating example for that and we 1212 // want to avoid untested code. 1213 NumRewrittenCopies += Changed; 1214 return Changed; 1215} 1216 1217/// Rewrite the source found through \p Def, by using the \p RewriteMap 1218/// and create a new COPY instruction. More info about RewriteMap in 1219/// PeepholeOptimizer::findNextSource. Right now this is only used to handle 1220/// Uncoalescable copies, since they are copy like instructions that aren't 1221/// recognized by the register allocator. 1222MachineInstr & 1223PeepholeOptimizer::rewriteSource(MachineInstr &CopyLike, 1224 RegSubRegPair Def, RewriteMapTy &RewriteMap) { 1225 assert(!TargetRegisterInfo::isPhysicalRegister(Def.Reg) && 1226 "We do not rewrite physical registers"); 1227 1228 // Find the new source to use in the COPY rewrite. 1229 RegSubRegPair NewSrc = getNewSource(MRI, TII, Def, RewriteMap); 1230 1231 // Insert the COPY. 1232 const TargetRegisterClass *DefRC = MRI->getRegClass(Def.Reg); 1233 unsigned NewVReg = MRI->createVirtualRegister(DefRC); 1234 1235 MachineInstr *NewCopy = 1236 BuildMI(*CopyLike.getParent(), &CopyLike, CopyLike.getDebugLoc(), 1237 TII->get(TargetOpcode::COPY), NewVReg) 1238 .addReg(NewSrc.Reg, 0, NewSrc.SubReg); 1239 1240 if (Def.SubReg) { 1241 NewCopy->getOperand(0).setSubReg(Def.SubReg); 1242 NewCopy->getOperand(0).setIsUndef(); 1243 } 1244 1245 LLVM_DEBUG(dbgs() << "-- RewriteSource\n"); 1246 LLVM_DEBUG(dbgs() << " Replacing: " << CopyLike); 1247 LLVM_DEBUG(dbgs() << " With: " << *NewCopy); 1248 MRI->replaceRegWith(Def.Reg, NewVReg); 1249 MRI->clearKillFlags(NewVReg); 1250 1251 // We extended the lifetime of NewSrc.Reg, clear the kill flags to 1252 // account for that. 1253 MRI->clearKillFlags(NewSrc.Reg); 1254 1255 return *NewCopy; 1256} 1257 1258/// Optimize copy-like instructions to create 1259/// register coalescer friendly instruction. 1260/// The optimization tries to kill-off the \p MI by looking 1261/// through a chain of copies to find a source that has a compatible 1262/// register class. 1263/// If such a source is found, it replace \p MI by a generic COPY 1264/// operation. 1265/// \pre isUncoalescableCopy(*MI) is true. 1266/// \return True, when \p MI has been optimized. In that case, \p MI has 1267/// been removed from its parent. 1268/// All COPY instructions created, are inserted in \p LocalMIs. 1269bool PeepholeOptimizer::optimizeUncoalescableCopy( 1270 MachineInstr &MI, SmallPtrSetImpl<MachineInstr *> &LocalMIs) { 1271 assert(isUncoalescableCopy(MI) && "Invalid argument"); 1272 UncoalescableRewriter CpyRewriter(MI); 1273 1274 // Rewrite each rewritable source by generating new COPYs. This works 1275 // differently from optimizeCoalescableCopy since it first makes sure that all 1276 // definitions can be rewritten. 1277 RewriteMapTy RewriteMap; 1278 RegSubRegPair Src; 1279 RegSubRegPair Def; 1280 SmallVector<RegSubRegPair, 4> RewritePairs; 1281 while (CpyRewriter.getNextRewritableSource(Src, Def)) { 1282 // If a physical register is here, this is probably for a good reason. 1283 // Do not rewrite that. 1284 if (TargetRegisterInfo::isPhysicalRegister(Def.Reg)) 1285 return false; 1286 1287 // If we do not know how to rewrite this definition, there is no point 1288 // in trying to kill this instruction. 1289 if (!findNextSource(Def, RewriteMap)) 1290 return false; 1291 1292 RewritePairs.push_back(Def); 1293 } 1294 1295 // The change is possible for all defs, do it. 1296 for (const RegSubRegPair &Def : RewritePairs) { 1297 // Rewrite the "copy" in a way the register coalescer understands. 1298 MachineInstr &NewCopy = rewriteSource(MI, Def, RewriteMap); 1299 LocalMIs.insert(&NewCopy); 1300 } 1301 1302 // MI is now dead. 1303 MI.eraseFromParent(); 1304 ++NumUncoalescableCopies; 1305 return true; 1306} 1307 1308/// Check whether MI is a candidate for folding into a later instruction. 1309/// We only fold loads to virtual registers and the virtual register defined 1310/// has a single use. 1311bool PeepholeOptimizer::isLoadFoldable( 1312 MachineInstr &MI, SmallSet<unsigned, 16> &FoldAsLoadDefCandidates) { 1313 if (!MI.canFoldAsLoad() || !MI.mayLoad()) 1314 return false; 1315 const MCInstrDesc &MCID = MI.getDesc(); 1316 if (MCID.getNumDefs() != 1) 1317 return false; 1318 1319 unsigned Reg = MI.getOperand(0).getReg(); 1320 // To reduce compilation time, we check MRI->hasOneNonDBGUse when inserting 1321 // loads. It should be checked when processing uses of the load, since 1322 // uses can be removed during peephole. 1323 if (!MI.getOperand(0).getSubReg() && 1324 TargetRegisterInfo::isVirtualRegister(Reg) && 1325 MRI->hasOneNonDBGUse(Reg)) { 1326 FoldAsLoadDefCandidates.insert(Reg); 1327 return true; 1328 } 1329 return false; 1330} 1331 1332bool PeepholeOptimizer::isMoveImmediate( 1333 MachineInstr &MI, SmallSet<unsigned, 4> &ImmDefRegs, 1334 DenseMap<unsigned, MachineInstr *> &ImmDefMIs) { 1335 const MCInstrDesc &MCID = MI.getDesc(); 1336 if (!MI.isMoveImmediate()) 1337 return false; 1338 if (MCID.getNumDefs() != 1) 1339 return false; 1340 unsigned Reg = MI.getOperand(0).getReg(); 1341 if (TargetRegisterInfo::isVirtualRegister(Reg)) { 1342 ImmDefMIs.insert(std::make_pair(Reg, &MI)); 1343 ImmDefRegs.insert(Reg); 1344 return true; 1345 } 1346 1347 return false; 1348} 1349 1350/// Try folding register operands that are defined by move immediate 1351/// instructions, i.e. a trivial constant folding optimization, if 1352/// and only if the def and use are in the same BB. 1353bool PeepholeOptimizer::foldImmediate(MachineInstr &MI, 1354 SmallSet<unsigned, 4> &ImmDefRegs, 1355 DenseMap<unsigned, MachineInstr *> &ImmDefMIs) { 1356 for (unsigned i = 0, e = MI.getDesc().getNumOperands(); i != e; ++i) { 1357 MachineOperand &MO = MI.getOperand(i); 1358 if (!MO.isReg() || MO.isDef()) 1359 continue; 1360 // Ignore dead implicit defs. 1361 if (MO.isImplicit() && MO.isDead()) 1362 continue; 1363 unsigned Reg = MO.getReg(); 1364 if (!TargetRegisterInfo::isVirtualRegister(Reg)) 1365 continue; 1366 if (ImmDefRegs.count(Reg) == 0) 1367 continue; 1368 DenseMap<unsigned, MachineInstr*>::iterator II = ImmDefMIs.find(Reg); 1369 assert(II != ImmDefMIs.end() && "couldn't find immediate definition"); 1370 if (TII->FoldImmediate(MI, *II->second, Reg, MRI)) { 1371 ++NumImmFold; 1372 return true; 1373 } 1374 } 1375 return false; 1376} 1377 1378// FIXME: This is very simple and misses some cases which should be handled when 1379// motivating examples are found. 1380// 1381// The copy rewriting logic should look at uses as well as defs and be able to 1382// eliminate copies across blocks. 1383// 1384// Later copies that are subregister extracts will also not be eliminated since 1385// only the first copy is considered. 1386// 1387// e.g. 1388// %1 = COPY %0 1389// %2 = COPY %0:sub1 1390// 1391// Should replace %2 uses with %1:sub1 1392bool PeepholeOptimizer::foldRedundantCopy(MachineInstr &MI, 1393 SmallSet<unsigned, 4> &CopySrcRegs, 1394 DenseMap<unsigned, MachineInstr *> &CopyMIs) { 1395 assert(MI.isCopy() && "expected a COPY machine instruction"); 1396 1397 unsigned SrcReg = MI.getOperand(1).getReg(); 1398 if (!TargetRegisterInfo::isVirtualRegister(SrcReg)) 1399 return false; 1400 1401 unsigned DstReg = MI.getOperand(0).getReg(); 1402 if (!TargetRegisterInfo::isVirtualRegister(DstReg)) 1403 return false; 1404 1405 if (CopySrcRegs.insert(SrcReg).second) { 1406 // First copy of this reg seen. 1407 CopyMIs.insert(std::make_pair(SrcReg, &MI)); 1408 return false; 1409 } 1410 1411 MachineInstr *PrevCopy = CopyMIs.find(SrcReg)->second; 1412 1413 unsigned SrcSubReg = MI.getOperand(1).getSubReg(); 1414 unsigned PrevSrcSubReg = PrevCopy->getOperand(1).getSubReg(); 1415 1416 // Can't replace different subregister extracts. 1417 if (SrcSubReg != PrevSrcSubReg) 1418 return false; 1419 1420 unsigned PrevDstReg = PrevCopy->getOperand(0).getReg(); 1421 1422 // Only replace if the copy register class is the same. 1423 // 1424 // TODO: If we have multiple copies to different register classes, we may want 1425 // to track multiple copies of the same source register. 1426 if (MRI->getRegClass(DstReg) != MRI->getRegClass(PrevDstReg)) 1427 return false; 1428 1429 MRI->replaceRegWith(DstReg, PrevDstReg); 1430 1431 // Lifetime of the previous copy has been extended. 1432 MRI->clearKillFlags(PrevDstReg); 1433 return true; 1434} 1435 1436bool PeepholeOptimizer::isNAPhysCopy(unsigned Reg) { 1437 return TargetRegisterInfo::isPhysicalRegister(Reg) && 1438 !MRI->isAllocatable(Reg); 1439} 1440 1441bool PeepholeOptimizer::foldRedundantNAPhysCopy( 1442 MachineInstr &MI, DenseMap<unsigned, MachineInstr *> &NAPhysToVirtMIs) { 1443 assert(MI.isCopy() && "expected a COPY machine instruction"); 1444 1445 if (DisableNAPhysCopyOpt) 1446 return false; 1447 1448 unsigned DstReg = MI.getOperand(0).getReg(); 1449 unsigned SrcReg = MI.getOperand(1).getReg(); 1450 if (isNAPhysCopy(SrcReg) && TargetRegisterInfo::isVirtualRegister(DstReg)) { 1451 // %vreg = COPY %physreg 1452 // Avoid using a datastructure which can track multiple live non-allocatable 1453 // phys->virt copies since LLVM doesn't seem to do this. 1454 NAPhysToVirtMIs.insert({SrcReg, &MI}); 1455 return false; 1456 } 1457 1458 if (!(TargetRegisterInfo::isVirtualRegister(SrcReg) && isNAPhysCopy(DstReg))) 1459 return false; 1460 1461 // %physreg = COPY %vreg 1462 auto PrevCopy = NAPhysToVirtMIs.find(DstReg); 1463 if (PrevCopy == NAPhysToVirtMIs.end()) { 1464 // We can't remove the copy: there was an intervening clobber of the 1465 // non-allocatable physical register after the copy to virtual. 1466 LLVM_DEBUG(dbgs() << "NAPhysCopy: intervening clobber forbids erasing " 1467 << MI); 1468 return false; 1469 } 1470 1471 unsigned PrevDstReg = PrevCopy->second->getOperand(0).getReg(); 1472 if (PrevDstReg == SrcReg) { 1473 // Remove the virt->phys copy: we saw the virtual register definition, and 1474 // the non-allocatable physical register's state hasn't changed since then. 1475 LLVM_DEBUG(dbgs() << "NAPhysCopy: erasing " << MI); 1476 ++NumNAPhysCopies; 1477 return true; 1478 } 1479 1480 // Potential missed optimization opportunity: we saw a different virtual 1481 // register get a copy of the non-allocatable physical register, and we only 1482 // track one such copy. Avoid getting confused by this new non-allocatable 1483 // physical register definition, and remove it from the tracked copies. 1484 LLVM_DEBUG(dbgs() << "NAPhysCopy: missed opportunity " << MI); 1485 NAPhysToVirtMIs.erase(PrevCopy); 1486 return false; 1487} 1488 1489/// \bried Returns true if \p MO is a virtual register operand. 1490static bool isVirtualRegisterOperand(MachineOperand &MO) { 1491 if (!MO.isReg()) 1492 return false; 1493 return TargetRegisterInfo::isVirtualRegister(MO.getReg()); 1494} 1495 1496bool PeepholeOptimizer::findTargetRecurrence( 1497 unsigned Reg, const SmallSet<unsigned, 2> &TargetRegs, 1498 RecurrenceCycle &RC) { 1499 // Recurrence found if Reg is in TargetRegs. 1500 if (TargetRegs.count(Reg)) 1501 return true; 1502 1503 // TODO: Curerntly, we only allow the last instruction of the recurrence 1504 // cycle (the instruction that feeds the PHI instruction) to have more than 1505 // one uses to guarantee that commuting operands does not tie registers 1506 // with overlapping live range. Once we have actual live range info of 1507 // each register, this constraint can be relaxed. 1508 if (!MRI->hasOneNonDBGUse(Reg)) 1509 return false; 1510 1511 // Give up if the reccurrence chain length is longer than the limit. 1512 if (RC.size() >= MaxRecurrenceChain) 1513 return false; 1514 1515 MachineInstr &MI = *(MRI->use_instr_nodbg_begin(Reg)); 1516 unsigned Idx = MI.findRegisterUseOperandIdx(Reg); 1517 1518 // Only interested in recurrences whose instructions have only one def, which 1519 // is a virtual register. 1520 if (MI.getDesc().getNumDefs() != 1) 1521 return false; 1522 1523 MachineOperand &DefOp = MI.getOperand(0); 1524 if (!isVirtualRegisterOperand(DefOp)) 1525 return false; 1526 1527 // Check if def operand of MI is tied to any use operand. We are only 1528 // interested in the case that all the instructions in the recurrence chain 1529 // have there def operand tied with one of the use operand. 1530 unsigned TiedUseIdx; 1531 if (!MI.isRegTiedToUseOperand(0, &TiedUseIdx)) 1532 return false; 1533 1534 if (Idx == TiedUseIdx) { 1535 RC.push_back(RecurrenceInstr(&MI)); 1536 return findTargetRecurrence(DefOp.getReg(), TargetRegs, RC); 1537 } else { 1538 // If Idx is not TiedUseIdx, check if Idx is commutable with TiedUseIdx. 1539 unsigned CommIdx = TargetInstrInfo::CommuteAnyOperandIndex; 1540 if (TII->findCommutedOpIndices(MI, Idx, CommIdx) && CommIdx == TiedUseIdx) { 1541 RC.push_back(RecurrenceInstr(&MI, Idx, CommIdx)); 1542 return findTargetRecurrence(DefOp.getReg(), TargetRegs, RC); 1543 } 1544 } 1545 1546 return false; 1547} 1548 1549/// Phi instructions will eventually be lowered to copy instructions. 1550/// If phi is in a loop header, a recurrence may formulated around the source 1551/// and destination of the phi. For such case commuting operands of the 1552/// instructions in the recurrence may enable coalescing of the copy instruction 1553/// generated from the phi. For example, if there is a recurrence of 1554/// 1555/// LoopHeader: 1556/// %1 = phi(%0, %100) 1557/// LoopLatch: 1558/// %0<def, tied1> = ADD %2<def, tied0>, %1 1559/// 1560/// , the fact that %0 and %2 are in the same tied operands set makes 1561/// the coalescing of copy instruction generated from the phi in 1562/// LoopHeader(i.e. %1 = COPY %0) impossible, because %1 and 1563/// %2 have overlapping live range. This introduces additional move 1564/// instruction to the final assembly. However, if we commute %2 and 1565/// %1 of ADD instruction, the redundant move instruction can be 1566/// avoided. 1567bool PeepholeOptimizer::optimizeRecurrence(MachineInstr &PHI) { 1568 SmallSet<unsigned, 2> TargetRegs; 1569 for (unsigned Idx = 1; Idx < PHI.getNumOperands(); Idx += 2) { 1570 MachineOperand &MO = PHI.getOperand(Idx); 1571 assert(isVirtualRegisterOperand(MO) && "Invalid PHI instruction"); 1572 TargetRegs.insert(MO.getReg()); 1573 } 1574 1575 bool Changed = false; 1576 RecurrenceCycle RC; 1577 if (findTargetRecurrence(PHI.getOperand(0).getReg(), TargetRegs, RC)) { 1578 // Commutes operands of instructions in RC if necessary so that the copy to 1579 // be generated from PHI can be coalesced. 1580 LLVM_DEBUG(dbgs() << "Optimize recurrence chain from " << PHI); 1581 for (auto &RI : RC) { 1582 LLVM_DEBUG(dbgs() << "\tInst: " << *(RI.getMI())); 1583 auto CP = RI.getCommutePair(); 1584 if (CP) { 1585 Changed = true; 1586 TII->commuteInstruction(*(RI.getMI()), false, (*CP).first, 1587 (*CP).second); 1588 LLVM_DEBUG(dbgs() << "\t\tCommuted: " << *(RI.getMI())); 1589 } 1590 } 1591 } 1592 1593 return Changed; 1594} 1595 1596bool PeepholeOptimizer::runOnMachineFunction(MachineFunction &MF) { 1597 if (skipFunction(MF.getFunction())) 1598 return false; 1599 1600 LLVM_DEBUG(dbgs() << "********** PEEPHOLE OPTIMIZER **********\n"); 1601 LLVM_DEBUG(dbgs() << "********** Function: " << MF.getName() << '\n'); 1602 1603 if (DisablePeephole) 1604 return false; 1605 1606 TII = MF.getSubtarget().getInstrInfo(); 1607 TRI = MF.getSubtarget().getRegisterInfo(); 1608 MRI = &MF.getRegInfo(); 1609 DT = Aggressive ? &getAnalysis<MachineDominatorTree>() : nullptr; 1610 MLI = &getAnalysis<MachineLoopInfo>(); 1611 1612 bool Changed = false; 1613 1614 for (MachineBasicBlock &MBB : MF) { 1615 bool SeenMoveImm = false; 1616 1617 // During this forward scan, at some point it needs to answer the question 1618 // "given a pointer to an MI in the current BB, is it located before or 1619 // after the current instruction". 1620 // To perform this, the following set keeps track of the MIs already seen 1621 // during the scan, if a MI is not in the set, it is assumed to be located 1622 // after. Newly created MIs have to be inserted in the set as well. 1623 SmallPtrSet<MachineInstr*, 16> LocalMIs; 1624 SmallSet<unsigned, 4> ImmDefRegs; 1625 DenseMap<unsigned, MachineInstr*> ImmDefMIs; 1626 SmallSet<unsigned, 16> FoldAsLoadDefCandidates; 1627 1628 // Track when a non-allocatable physical register is copied to a virtual 1629 // register so that useless moves can be removed. 1630 // 1631 // %physreg is the map index; MI is the last valid `%vreg = COPY %physreg` 1632 // without any intervening re-definition of %physreg. 1633 DenseMap<unsigned, MachineInstr *> NAPhysToVirtMIs; 1634 1635 // Set of virtual registers that are copied from. 1636 SmallSet<unsigned, 4> CopySrcRegs; 1637 DenseMap<unsigned, MachineInstr *> CopySrcMIs; 1638 1639 bool IsLoopHeader = MLI->isLoopHeader(&MBB); 1640 1641 for (MachineBasicBlock::iterator MII = MBB.begin(), MIE = MBB.end(); 1642 MII != MIE; ) { 1643 MachineInstr *MI = &*MII; 1644 // We may be erasing MI below, increment MII now. 1645 ++MII; 1646 LocalMIs.insert(MI); 1647 1648 // Skip debug instructions. They should not affect this peephole optimization. 1649 if (MI->isDebugInstr()) 1650 continue; 1651 1652 if (MI->isPosition()) 1653 continue; 1654 1655 if (IsLoopHeader && MI->isPHI()) { 1656 if (optimizeRecurrence(*MI)) { 1657 Changed = true; 1658 continue; 1659 } 1660 } 1661 1662 if (!MI->isCopy()) { 1663 for (const MachineOperand &MO : MI->operands()) { 1664 // Visit all operands: definitions can be implicit or explicit. 1665 if (MO.isReg()) { 1666 unsigned Reg = MO.getReg(); 1667 if (MO.isDef() && isNAPhysCopy(Reg)) { 1668 const auto &Def = NAPhysToVirtMIs.find(Reg); 1669 if (Def != NAPhysToVirtMIs.end()) { 1670 // A new definition of the non-allocatable physical register 1671 // invalidates previous copies. 1672 LLVM_DEBUG(dbgs() 1673 << "NAPhysCopy: invalidating because of " << *MI); 1674 NAPhysToVirtMIs.erase(Def); 1675 } 1676 } 1677 } else if (MO.isRegMask()) { 1678 const uint32_t *RegMask = MO.getRegMask(); 1679 for (auto &RegMI : NAPhysToVirtMIs) { 1680 unsigned Def = RegMI.first; 1681 if (MachineOperand::clobbersPhysReg(RegMask, Def)) { 1682 LLVM_DEBUG(dbgs() 1683 << "NAPhysCopy: invalidating because of " << *MI); 1684 NAPhysToVirtMIs.erase(Def); 1685 } 1686 } 1687 } 1688 } 1689 } 1690 1691 if (MI->isImplicitDef() || MI->isKill()) 1692 continue; 1693 1694 if (MI->isInlineAsm() || MI->hasUnmodeledSideEffects()) { 1695 // Blow away all non-allocatable physical registers knowledge since we 1696 // don't know what's correct anymore. 1697 // 1698 // FIXME: handle explicit asm clobbers. 1699 LLVM_DEBUG(dbgs() << "NAPhysCopy: blowing away all info due to " 1700 << *MI); 1701 NAPhysToVirtMIs.clear(); 1702 } 1703 1704 if ((isUncoalescableCopy(*MI) && 1705 optimizeUncoalescableCopy(*MI, LocalMIs)) || 1706 (MI->isCompare() && optimizeCmpInstr(*MI)) || 1707 (MI->isSelect() && optimizeSelect(*MI, LocalMIs))) { 1708 // MI is deleted. 1709 LocalMIs.erase(MI); 1710 Changed = true; 1711 continue; 1712 } 1713 1714 if (MI->isConditionalBranch() && optimizeCondBranch(*MI)) { 1715 Changed = true; 1716 continue; 1717 } 1718 1719 if (isCoalescableCopy(*MI) && optimizeCoalescableCopy(*MI)) { 1720 // MI is just rewritten. 1721 Changed = true; 1722 continue; 1723 } 1724 1725 if (MI->isCopy() && 1726 (foldRedundantCopy(*MI, CopySrcRegs, CopySrcMIs) || 1727 foldRedundantNAPhysCopy(*MI, NAPhysToVirtMIs))) { 1728 LocalMIs.erase(MI); 1729 MI->eraseFromParent(); 1730 Changed = true; 1731 continue; 1732 } 1733 1734 if (isMoveImmediate(*MI, ImmDefRegs, ImmDefMIs)) { 1735 SeenMoveImm = true; 1736 } else { 1737 Changed |= optimizeExtInstr(*MI, MBB, LocalMIs); 1738 // optimizeExtInstr might have created new instructions after MI 1739 // and before the already incremented MII. Adjust MII so that the 1740 // next iteration sees the new instructions. 1741 MII = MI; 1742 ++MII; 1743 if (SeenMoveImm) 1744 Changed |= foldImmediate(*MI, ImmDefRegs, ImmDefMIs); 1745 } 1746 1747 // Check whether MI is a load candidate for folding into a later 1748 // instruction. If MI is not a candidate, check whether we can fold an 1749 // earlier load into MI. 1750 if (!isLoadFoldable(*MI, FoldAsLoadDefCandidates) && 1751 !FoldAsLoadDefCandidates.empty()) { 1752 1753 // We visit each operand even after successfully folding a previous 1754 // one. This allows us to fold multiple loads into a single 1755 // instruction. We do assume that optimizeLoadInstr doesn't insert 1756 // foldable uses earlier in the argument list. Since we don't restart 1757 // iteration, we'd miss such cases. 1758 const MCInstrDesc &MIDesc = MI->getDesc(); 1759 for (unsigned i = MIDesc.getNumDefs(); i != MI->getNumOperands(); 1760 ++i) { 1761 const MachineOperand &MOp = MI->getOperand(i); 1762 if (!MOp.isReg()) 1763 continue; 1764 unsigned FoldAsLoadDefReg = MOp.getReg(); 1765 if (FoldAsLoadDefCandidates.count(FoldAsLoadDefReg)) { 1766 // We need to fold load after optimizeCmpInstr, since 1767 // optimizeCmpInstr can enable folding by converting SUB to CMP. 1768 // Save FoldAsLoadDefReg because optimizeLoadInstr() resets it and 1769 // we need it for markUsesInDebugValueAsUndef(). 1770 unsigned FoldedReg = FoldAsLoadDefReg; 1771 MachineInstr *DefMI = nullptr; 1772 if (MachineInstr *FoldMI = 1773 TII->optimizeLoadInstr(*MI, MRI, FoldAsLoadDefReg, DefMI)) { 1774 // Update LocalMIs since we replaced MI with FoldMI and deleted 1775 // DefMI. 1776 LLVM_DEBUG(dbgs() << "Replacing: " << *MI); 1777 LLVM_DEBUG(dbgs() << " With: " << *FoldMI); 1778 LocalMIs.erase(MI); 1779 LocalMIs.erase(DefMI); 1780 LocalMIs.insert(FoldMI); 1781 MI->eraseFromParent(); 1782 DefMI->eraseFromParent(); 1783 MRI->markUsesInDebugValueAsUndef(FoldedReg); 1784 FoldAsLoadDefCandidates.erase(FoldedReg); 1785 ++NumLoadFold; 1786 1787 // MI is replaced with FoldMI so we can continue trying to fold 1788 Changed = true; 1789 MI = FoldMI; 1790 } 1791 } 1792 } 1793 } 1794 1795 // If we run into an instruction we can't fold across, discard 1796 // the load candidates. Note: We might be able to fold *into* this 1797 // instruction, so this needs to be after the folding logic. 1798 if (MI->isLoadFoldBarrier()) { 1799 LLVM_DEBUG(dbgs() << "Encountered load fold barrier on " << *MI); 1800 FoldAsLoadDefCandidates.clear(); 1801 } 1802 } 1803 } 1804 1805 return Changed; 1806} 1807 1808ValueTrackerResult ValueTracker::getNextSourceFromCopy() { 1809 assert(Def->isCopy() && "Invalid definition"); 1810 // Copy instruction are supposed to be: Def = Src. 1811 // If someone breaks this assumption, bad things will happen everywhere. 1812 assert(Def->getNumOperands() == 2 && "Invalid number of operands"); 1813 1814 if (Def->getOperand(DefIdx).getSubReg() != DefSubReg) 1815 // If we look for a different subreg, it means we want a subreg of src. 1816 // Bails as we do not support composing subregs yet. 1817 return ValueTrackerResult(); 1818 // Otherwise, we want the whole source. 1819 const MachineOperand &Src = Def->getOperand(1); 1820 if (Src.isUndef()) 1821 return ValueTrackerResult(); 1822 return ValueTrackerResult(Src.getReg(), Src.getSubReg()); 1823} 1824 1825ValueTrackerResult ValueTracker::getNextSourceFromBitcast() { 1826 assert(Def->isBitcast() && "Invalid definition"); 1827 1828 // Bail if there are effects that a plain copy will not expose. 1829 if (Def->hasUnmodeledSideEffects()) 1830 return ValueTrackerResult(); 1831 1832 // Bitcasts with more than one def are not supported. 1833 if (Def->getDesc().getNumDefs() != 1) 1834 return ValueTrackerResult(); 1835 const MachineOperand DefOp = Def->getOperand(DefIdx); 1836 if (DefOp.getSubReg() != DefSubReg) 1837 // If we look for a different subreg, it means we want a subreg of the src. 1838 // Bails as we do not support composing subregs yet. 1839 return ValueTrackerResult(); 1840 1841 unsigned SrcIdx = Def->getNumOperands(); 1842 for (unsigned OpIdx = DefIdx + 1, EndOpIdx = SrcIdx; OpIdx != EndOpIdx; 1843 ++OpIdx) { 1844 const MachineOperand &MO = Def->getOperand(OpIdx); 1845 if (!MO.isReg() || !MO.getReg()) 1846 continue; 1847 // Ignore dead implicit defs. 1848 if (MO.isImplicit() && MO.isDead()) 1849 continue; 1850 assert(!MO.isDef() && "We should have skipped all the definitions by now"); 1851 if (SrcIdx != EndOpIdx) 1852 // Multiple sources? 1853 return ValueTrackerResult(); 1854 SrcIdx = OpIdx; 1855 } 1856 1857 // Stop when any user of the bitcast is a SUBREG_TO_REG, replacing with a COPY 1858 // will break the assumed guarantees for the upper bits. 1859 for (const MachineInstr &UseMI : MRI.use_nodbg_instructions(DefOp.getReg())) { 1860 if (UseMI.isSubregToReg()) 1861 return ValueTrackerResult(); 1862 } 1863 1864 const MachineOperand &Src = Def->getOperand(SrcIdx); 1865 if (Src.isUndef()) 1866 return ValueTrackerResult(); 1867 return ValueTrackerResult(Src.getReg(), Src.getSubReg()); 1868} 1869 1870ValueTrackerResult ValueTracker::getNextSourceFromRegSequence() { 1871 assert((Def->isRegSequence() || Def->isRegSequenceLike()) && 1872 "Invalid definition"); 1873 1874 if (Def->getOperand(DefIdx).getSubReg()) 1875 // If we are composing subregs, bail out. 1876 // The case we are checking is Def.<subreg> = REG_SEQUENCE. 1877 // This should almost never happen as the SSA property is tracked at 1878 // the register level (as opposed to the subreg level). 1879 // I.e., 1880 // Def.sub0 = 1881 // Def.sub1 = 1882 // is a valid SSA representation for Def.sub0 and Def.sub1, but not for 1883 // Def. Thus, it must not be generated. 1884 // However, some code could theoretically generates a single 1885 // Def.sub0 (i.e, not defining the other subregs) and we would 1886 // have this case. 1887 // If we can ascertain (or force) that this never happens, we could 1888 // turn that into an assertion. 1889 return ValueTrackerResult(); 1890 1891 if (!TII) 1892 // We could handle the REG_SEQUENCE here, but we do not want to 1893 // duplicate the code from the generic TII. 1894 return ValueTrackerResult(); 1895 1896 SmallVector<RegSubRegPairAndIdx, 8> RegSeqInputRegs; 1897 if (!TII->getRegSequenceInputs(*Def, DefIdx, RegSeqInputRegs)) 1898 return ValueTrackerResult(); 1899 1900 // We are looking at: 1901 // Def = REG_SEQUENCE v0, sub0, v1, sub1, ... 1902 // Check if one of the operand defines the subreg we are interested in. 1903 for (const RegSubRegPairAndIdx &RegSeqInput : RegSeqInputRegs) { 1904 if (RegSeqInput.SubIdx == DefSubReg) { 1905 if (RegSeqInput.SubReg) 1906 // Bail if we have to compose sub registers. 1907 return ValueTrackerResult(); 1908 1909 return ValueTrackerResult(RegSeqInput.Reg, RegSeqInput.SubReg); 1910 } 1911 } 1912 1913 // If the subreg we are tracking is super-defined by another subreg, 1914 // we could follow this value. However, this would require to compose 1915 // the subreg and we do not do that for now. 1916 return ValueTrackerResult(); 1917} 1918 1919ValueTrackerResult ValueTracker::getNextSourceFromInsertSubreg() { 1920 assert((Def->isInsertSubreg() || Def->isInsertSubregLike()) && 1921 "Invalid definition"); 1922 1923 if (Def->getOperand(DefIdx).getSubReg()) 1924 // If we are composing subreg, bail out. 1925 // Same remark as getNextSourceFromRegSequence. 1926 // I.e., this may be turned into an assert. 1927 return ValueTrackerResult(); 1928 1929 if (!TII) 1930 // We could handle the REG_SEQUENCE here, but we do not want to 1931 // duplicate the code from the generic TII. 1932 return ValueTrackerResult(); 1933 1934 RegSubRegPair BaseReg; 1935 RegSubRegPairAndIdx InsertedReg; 1936 if (!TII->getInsertSubregInputs(*Def, DefIdx, BaseReg, InsertedReg)) 1937 return ValueTrackerResult(); 1938 1939 // We are looking at: 1940 // Def = INSERT_SUBREG v0, v1, sub1 1941 // There are two cases: 1942 // 1. DefSubReg == sub1, get v1. 1943 // 2. DefSubReg != sub1, the value may be available through v0. 1944 1945 // #1 Check if the inserted register matches the required sub index. 1946 if (InsertedReg.SubIdx == DefSubReg) { 1947 return ValueTrackerResult(InsertedReg.Reg, InsertedReg.SubReg); 1948 } 1949 // #2 Otherwise, if the sub register we are looking for is not partial 1950 // defined by the inserted element, we can look through the main 1951 // register (v0). 1952 const MachineOperand &MODef = Def->getOperand(DefIdx); 1953 // If the result register (Def) and the base register (v0) do not 1954 // have the same register class or if we have to compose 1955 // subregisters, bail out. 1956 if (MRI.getRegClass(MODef.getReg()) != MRI.getRegClass(BaseReg.Reg) || 1957 BaseReg.SubReg) 1958 return ValueTrackerResult(); 1959 1960 // Get the TRI and check if the inserted sub-register overlaps with the 1961 // sub-register we are tracking. 1962 const TargetRegisterInfo *TRI = MRI.getTargetRegisterInfo(); 1963 if (!TRI || 1964 !(TRI->getSubRegIndexLaneMask(DefSubReg) & 1965 TRI->getSubRegIndexLaneMask(InsertedReg.SubIdx)).none()) 1966 return ValueTrackerResult(); 1967 // At this point, the value is available in v0 via the same subreg 1968 // we used for Def. 1969 return ValueTrackerResult(BaseReg.Reg, DefSubReg); 1970} 1971 1972ValueTrackerResult ValueTracker::getNextSourceFromExtractSubreg() { 1973 assert((Def->isExtractSubreg() || 1974 Def->isExtractSubregLike()) && "Invalid definition"); 1975 // We are looking at: 1976 // Def = EXTRACT_SUBREG v0, sub0 1977 1978 // Bail if we have to compose sub registers. 1979 // Indeed, if DefSubReg != 0, we would have to compose it with sub0. 1980 if (DefSubReg) 1981 return ValueTrackerResult(); 1982 1983 if (!TII) 1984 // We could handle the EXTRACT_SUBREG here, but we do not want to 1985 // duplicate the code from the generic TII. 1986 return ValueTrackerResult(); 1987 1988 RegSubRegPairAndIdx ExtractSubregInputReg; 1989 if (!TII->getExtractSubregInputs(*Def, DefIdx, ExtractSubregInputReg)) 1990 return ValueTrackerResult(); 1991 1992 // Bail if we have to compose sub registers. 1993 // Likewise, if v0.subreg != 0, we would have to compose v0.subreg with sub0. 1994 if (ExtractSubregInputReg.SubReg) 1995 return ValueTrackerResult(); 1996 // Otherwise, the value is available in the v0.sub0. 1997 return ValueTrackerResult(ExtractSubregInputReg.Reg, 1998 ExtractSubregInputReg.SubIdx); 1999} 2000 2001ValueTrackerResult ValueTracker::getNextSourceFromSubregToReg() { 2002 assert(Def->isSubregToReg() && "Invalid definition"); 2003 // We are looking at: 2004 // Def = SUBREG_TO_REG Imm, v0, sub0 2005 2006 // Bail if we have to compose sub registers. 2007 // If DefSubReg != sub0, we would have to check that all the bits 2008 // we track are included in sub0 and if yes, we would have to 2009 // determine the right subreg in v0. 2010 if (DefSubReg != Def->getOperand(3).getImm()) 2011 return ValueTrackerResult(); 2012 // Bail if we have to compose sub registers. 2013 // Likewise, if v0.subreg != 0, we would have to compose it with sub0. 2014 if (Def->getOperand(2).getSubReg()) 2015 return ValueTrackerResult(); 2016 2017 return ValueTrackerResult(Def->getOperand(2).getReg(), 2018 Def->getOperand(3).getImm()); 2019} 2020 2021/// Explore each PHI incoming operand and return its sources. 2022ValueTrackerResult ValueTracker::getNextSourceFromPHI() { 2023 assert(Def->isPHI() && "Invalid definition"); 2024 ValueTrackerResult Res; 2025 2026 // If we look for a different subreg, bail as we do not support composing 2027 // subregs yet. 2028 if (Def->getOperand(0).getSubReg() != DefSubReg) 2029 return ValueTrackerResult(); 2030 2031 // Return all register sources for PHI instructions. 2032 for (unsigned i = 1, e = Def->getNumOperands(); i < e; i += 2) { 2033 const MachineOperand &MO = Def->getOperand(i); 2034 assert(MO.isReg() && "Invalid PHI instruction"); 2035 // We have no code to deal with undef operands. They shouldn't happen in 2036 // normal programs anyway. 2037 if (MO.isUndef()) 2038 return ValueTrackerResult(); 2039 Res.addSource(MO.getReg(), MO.getSubReg()); 2040 } 2041 2042 return Res; 2043} 2044 2045ValueTrackerResult ValueTracker::getNextSourceImpl() { 2046 assert(Def && "This method needs a valid definition"); 2047 2048 assert(((Def->getOperand(DefIdx).isDef() && 2049 (DefIdx < Def->getDesc().getNumDefs() || 2050 Def->getDesc().isVariadic())) || 2051 Def->getOperand(DefIdx).isImplicit()) && 2052 "Invalid DefIdx"); 2053 if (Def->isCopy()) 2054 return getNextSourceFromCopy(); 2055 if (Def->isBitcast()) 2056 return getNextSourceFromBitcast(); 2057 // All the remaining cases involve "complex" instructions. 2058 // Bail if we did not ask for the advanced tracking. 2059 if (DisableAdvCopyOpt) 2060 return ValueTrackerResult(); 2061 if (Def->isRegSequence() || Def->isRegSequenceLike()) 2062 return getNextSourceFromRegSequence(); 2063 if (Def->isInsertSubreg() || Def->isInsertSubregLike()) 2064 return getNextSourceFromInsertSubreg(); 2065 if (Def->isExtractSubreg() || Def->isExtractSubregLike()) 2066 return getNextSourceFromExtractSubreg(); 2067 if (Def->isSubregToReg()) 2068 return getNextSourceFromSubregToReg(); 2069 if (Def->isPHI()) 2070 return getNextSourceFromPHI(); 2071 return ValueTrackerResult(); 2072} 2073 2074ValueTrackerResult ValueTracker::getNextSource() { 2075 // If we reach a point where we cannot move up in the use-def chain, 2076 // there is nothing we can get. 2077 if (!Def) 2078 return ValueTrackerResult(); 2079 2080 ValueTrackerResult Res = getNextSourceImpl(); 2081 if (Res.isValid()) { 2082 // Update definition, definition index, and subregister for the 2083 // next call of getNextSource. 2084 // Update the current register. 2085 bool OneRegSrc = Res.getNumSources() == 1; 2086 if (OneRegSrc) 2087 Reg = Res.getSrcReg(0); 2088 // Update the result before moving up in the use-def chain 2089 // with the instruction containing the last found sources. 2090 Res.setInst(Def); 2091 2092 // If we can still move up in the use-def chain, move to the next 2093 // definition. 2094 if (!TargetRegisterInfo::isPhysicalRegister(Reg) && OneRegSrc) { 2095 MachineRegisterInfo::def_iterator DI = MRI.def_begin(Reg); 2096 if (DI != MRI.def_end()) { 2097 Def = DI->getParent(); 2098 DefIdx = DI.getOperandNo(); 2099 DefSubReg = Res.getSrcSubReg(0); 2100 } else { 2101 Def = nullptr; 2102 } 2103 return Res; 2104 } 2105 } 2106 // If we end up here, this means we will not be able to find another source 2107 // for the next iteration. Make sure any new call to getNextSource bails out 2108 // early by cutting the use-def chain. 2109 Def = nullptr; 2110 return Res; 2111} 2112