ISDOpcodes.h revision 208599
1//===-- llvm/CodeGen/ISDOpcodes.h - CodeGen opcodes -------------*- C++ -*-===// 2// 3// The LLVM Compiler Infrastructure 4// 5// This file is distributed under the University of Illinois Open Source 6// License. See LICENSE.TXT for details. 7// 8//===----------------------------------------------------------------------===// 9// 10// This file declares codegen opcodes and related utilities. 11// 12//===----------------------------------------------------------------------===// 13 14#ifndef LLVM_CODEGEN_ISDOPCODES_H 15#define LLVM_CODEGEN_ISDOPCODES_H 16 17namespace llvm { 18 19/// ISD namespace - This namespace contains an enum which represents all of the 20/// SelectionDAG node types and value types. 21/// 22namespace ISD { 23 24 //===--------------------------------------------------------------------===// 25 /// ISD::NodeType enum - This enum defines the target-independent operators 26 /// for a SelectionDAG. 27 /// 28 /// Targets may also define target-dependent operator codes for SDNodes. For 29 /// example, on x86, these are the enum values in the X86ISD namespace. 30 /// Targets should aim to use target-independent operators to model their 31 /// instruction sets as much as possible, and only use target-dependent 32 /// operators when they have special requirements. 33 /// 34 /// Finally, during and after selection proper, SNodes may use special 35 /// operator codes that correspond directly with MachineInstr opcodes. These 36 /// are used to represent selected instructions. See the isMachineOpcode() 37 /// and getMachineOpcode() member functions of SDNode. 38 /// 39 enum NodeType { 40 // DELETED_NODE - This is an illegal value that is used to catch 41 // errors. This opcode is not a legal opcode for any node. 42 DELETED_NODE, 43 44 // EntryToken - This is the marker used to indicate the start of the region. 45 EntryToken, 46 47 // TokenFactor - This node takes multiple tokens as input and produces a 48 // single token result. This is used to represent the fact that the operand 49 // operators are independent of each other. 50 TokenFactor, 51 52 // AssertSext, AssertZext - These nodes record if a register contains a 53 // value that has already been zero or sign extended from a narrower type. 54 // These nodes take two operands. The first is the node that has already 55 // been extended, and the second is a value type node indicating the width 56 // of the extension 57 AssertSext, AssertZext, 58 59 // Various leaf nodes. 60 BasicBlock, VALUETYPE, CONDCODE, Register, 61 Constant, ConstantFP, 62 GlobalAddress, GlobalTLSAddress, FrameIndex, 63 JumpTable, ConstantPool, ExternalSymbol, BlockAddress, 64 65 // The address of the GOT 66 GLOBAL_OFFSET_TABLE, 67 68 // FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and 69 // llvm.returnaddress on the DAG. These nodes take one operand, the index 70 // of the frame or return address to return. An index of zero corresponds 71 // to the current function's frame or return address, an index of one to the 72 // parent's frame or return address, and so on. 73 FRAMEADDR, RETURNADDR, 74 75 // FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to 76 // first (possible) on-stack argument. This is needed for correct stack 77 // adjustment during unwind. 78 FRAME_TO_ARGS_OFFSET, 79 80 // RESULT, OUTCHAIN = EXCEPTIONADDR(INCHAIN) - This node represents the 81 // address of the exception block on entry to an landing pad block. 82 EXCEPTIONADDR, 83 84 // RESULT, OUTCHAIN = LSDAADDR(INCHAIN) - This node represents the 85 // address of the Language Specific Data Area for the enclosing function. 86 LSDAADDR, 87 88 // RESULT, OUTCHAIN = EHSELECTION(INCHAIN, EXCEPTION) - This node represents 89 // the selection index of the exception thrown. 90 EHSELECTION, 91 92 // OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents 93 // 'eh_return' gcc dwarf builtin, which is used to return from 94 // exception. The general meaning is: adjust stack by OFFSET and pass 95 // execution to HANDLER. Many platform-related details also :) 96 EH_RETURN, 97 98 // OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer) 99 // This corresponds to the eh.sjlj.setjmp intrinsic. 100 // It takes an input chain and a pointer to the jump buffer as inputs 101 // and returns an outchain. 102 EH_SJLJ_SETJMP, 103 104 // OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer) 105 // This corresponds to the eh.sjlj.longjmp intrinsic. 106 // It takes an input chain and a pointer to the jump buffer as inputs 107 // and returns an outchain. 108 EH_SJLJ_LONGJMP, 109 110 // TargetConstant* - Like Constant*, but the DAG does not do any folding, 111 // simplification, or lowering of the constant. They are used for constants 112 // which are known to fit in the immediate fields of their users, or for 113 // carrying magic numbers which are not values which need to be materialized 114 // in registers. 115 TargetConstant, 116 TargetConstantFP, 117 118 // TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or 119 // anything else with this node, and this is valid in the target-specific 120 // dag, turning into a GlobalAddress operand. 121 TargetGlobalAddress, 122 TargetGlobalTLSAddress, 123 TargetFrameIndex, 124 TargetJumpTable, 125 TargetConstantPool, 126 TargetExternalSymbol, 127 TargetBlockAddress, 128 129 /// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...) 130 /// This node represents a target intrinsic function with no side effects. 131 /// The first operand is the ID number of the intrinsic from the 132 /// llvm::Intrinsic namespace. The operands to the intrinsic follow. The 133 /// node has returns the result of the intrinsic. 134 INTRINSIC_WO_CHAIN, 135 136 /// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...) 137 /// This node represents a target intrinsic function with side effects that 138 /// returns a result. The first operand is a chain pointer. The second is 139 /// the ID number of the intrinsic from the llvm::Intrinsic namespace. The 140 /// operands to the intrinsic follow. The node has two results, the result 141 /// of the intrinsic and an output chain. 142 INTRINSIC_W_CHAIN, 143 144 /// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...) 145 /// This node represents a target intrinsic function with side effects that 146 /// does not return a result. The first operand is a chain pointer. The 147 /// second is the ID number of the intrinsic from the llvm::Intrinsic 148 /// namespace. The operands to the intrinsic follow. 149 INTRINSIC_VOID, 150 151 // CopyToReg - This node has three operands: a chain, a register number to 152 // set to this value, and a value. 153 CopyToReg, 154 155 // CopyFromReg - This node indicates that the input value is a virtual or 156 // physical register that is defined outside of the scope of this 157 // SelectionDAG. The register is available from the RegisterSDNode object. 158 CopyFromReg, 159 160 // UNDEF - An undefined node 161 UNDEF, 162 163 // EXTRACT_ELEMENT - This is used to get the lower or upper (determined by 164 // a Constant, which is required to be operand #1) half of the integer or 165 // float value specified as operand #0. This is only for use before 166 // legalization, for values that will be broken into multiple registers. 167 EXTRACT_ELEMENT, 168 169 // BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. Given 170 // two values of the same integer value type, this produces a value twice as 171 // big. Like EXTRACT_ELEMENT, this can only be used before legalization. 172 BUILD_PAIR, 173 174 // MERGE_VALUES - This node takes multiple discrete operands and returns 175 // them all as its individual results. This nodes has exactly the same 176 // number of inputs and outputs. This node is useful for some pieces of the 177 // code generator that want to think about a single node with multiple 178 // results, not multiple nodes. 179 MERGE_VALUES, 180 181 // Simple integer binary arithmetic operators. 182 ADD, SUB, MUL, SDIV, UDIV, SREM, UREM, 183 184 // SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing 185 // a signed/unsigned value of type i[2*N], and return the full value as 186 // two results, each of type iN. 187 SMUL_LOHI, UMUL_LOHI, 188 189 // SDIVREM/UDIVREM - Divide two integers and produce both a quotient and 190 // remainder result. 191 SDIVREM, UDIVREM, 192 193 // CARRY_FALSE - This node is used when folding other nodes, 194 // like ADDC/SUBC, which indicate the carry result is always false. 195 CARRY_FALSE, 196 197 // Carry-setting nodes for multiple precision addition and subtraction. 198 // These nodes take two operands of the same value type, and produce two 199 // results. The first result is the normal add or sub result, the second 200 // result is the carry flag result. 201 ADDC, SUBC, 202 203 // Carry-using nodes for multiple precision addition and subtraction. These 204 // nodes take three operands: The first two are the normal lhs and rhs to 205 // the add or sub, and the third is the input carry flag. These nodes 206 // produce two results; the normal result of the add or sub, and the output 207 // carry flag. These nodes both read and write a carry flag to allow them 208 // to them to be chained together for add and sub of arbitrarily large 209 // values. 210 ADDE, SUBE, 211 212 // RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition. 213 // These nodes take two operands: the normal LHS and RHS to the add. They 214 // produce two results: the normal result of the add, and a boolean that 215 // indicates if an overflow occured (*not* a flag, because it may be stored 216 // to memory, etc.). If the type of the boolean is not i1 then the high 217 // bits conform to getBooleanContents. 218 // These nodes are generated from the llvm.[su]add.with.overflow intrinsics. 219 SADDO, UADDO, 220 221 // Same for subtraction 222 SSUBO, USUBO, 223 224 // Same for multiplication 225 SMULO, UMULO, 226 227 // Simple binary floating point operators. 228 FADD, FSUB, FMUL, FDIV, FREM, 229 230 // FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This 231 // DAG node does not require that X and Y have the same type, just that they 232 // are both floating point. X and the result must have the same type. 233 // FCOPYSIGN(f32, f64) is allowed. 234 FCOPYSIGN, 235 236 // INT = FGETSIGN(FP) - Return the sign bit of the specified floating point 237 // value as an integer 0/1 value. 238 FGETSIGN, 239 240 /// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the 241 /// specified, possibly variable, elements. The number of elements is 242 /// required to be a power of two. The types of the operands must all be 243 /// the same and must match the vector element type, except that integer 244 /// types are allowed to be larger than the element type, in which case 245 /// the operands are implicitly truncated. 246 BUILD_VECTOR, 247 248 /// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element 249 /// at IDX replaced with VAL. If the type of VAL is larger than the vector 250 /// element type then VAL is truncated before replacement. 251 INSERT_VECTOR_ELT, 252 253 /// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR 254 /// identified by the (potentially variable) element number IDX. If the 255 /// return type is an integer type larger than the element type of the 256 /// vector, the result is extended to the width of the return type. 257 EXTRACT_VECTOR_ELT, 258 259 /// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of 260 /// vector type with the same length and element type, this produces a 261 /// concatenated vector result value, with length equal to the sum of the 262 /// lengths of the input vectors. 263 CONCAT_VECTORS, 264 265 /// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an 266 /// vector value) starting with the (potentially variable) element number 267 /// IDX, which must be a multiple of the result vector length. 268 EXTRACT_SUBVECTOR, 269 270 /// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as 271 /// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int 272 /// values that indicate which value (or undef) each result element will 273 /// get. These constant ints are accessible through the 274 /// ShuffleVectorSDNode class. This is quite similar to the Altivec 275 /// 'vperm' instruction, except that the indices must be constants and are 276 /// in terms of the element size of VEC1/VEC2, not in terms of bytes. 277 VECTOR_SHUFFLE, 278 279 /// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a 280 /// scalar value into element 0 of the resultant vector type. The top 281 /// elements 1 to N-1 of the N-element vector are undefined. The type 282 /// of the operand must match the vector element type, except when they 283 /// are integer types. In this case the operand is allowed to be wider 284 /// than the vector element type, and is implicitly truncated to it. 285 SCALAR_TO_VECTOR, 286 287 // MULHU/MULHS - Multiply high - Multiply two integers of type iN, producing 288 // an unsigned/signed value of type i[2*N], then return the top part. 289 MULHU, MULHS, 290 291 // Bitwise operators - logical and, logical or, logical xor, shift left, 292 // shift right algebraic (shift in sign bits), shift right logical (shift in 293 // zeroes), rotate left, rotate right, and byteswap. 294 AND, OR, XOR, SHL, SRA, SRL, ROTL, ROTR, BSWAP, 295 296 // Counting operators 297 CTTZ, CTLZ, CTPOP, 298 299 // Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not 300 // i1 then the high bits must conform to getBooleanContents. 301 SELECT, 302 303 // Select with condition operator - This selects between a true value and 304 // a false value (ops #2 and #3) based on the boolean result of comparing 305 // the lhs and rhs (ops #0 and #1) of a conditional expression with the 306 // condition code in op #4, a CondCodeSDNode. 307 SELECT_CC, 308 309 // SetCC operator - This evaluates to a true value iff the condition is 310 // true. If the result value type is not i1 then the high bits conform 311 // to getBooleanContents. The operands to this are the left and right 312 // operands to compare (ops #0, and #1) and the condition code to compare 313 // them with (op #2) as a CondCodeSDNode. 314 SETCC, 315 316 // RESULT = VSETCC(LHS, RHS, COND) operator - This evaluates to a vector of 317 // integer elements with all bits of the result elements set to true if the 318 // comparison is true or all cleared if the comparison is false. The 319 // operands to this are the left and right operands to compare (LHS/RHS) and 320 // the condition code to compare them with (COND) as a CondCodeSDNode. 321 VSETCC, 322 323 // SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded 324 // integer shift operations, just like ADD/SUB_PARTS. The operation 325 // ordering is: 326 // [Lo,Hi] = op [LoLHS,HiLHS], Amt 327 SHL_PARTS, SRA_PARTS, SRL_PARTS, 328 329 // Conversion operators. These are all single input single output 330 // operations. For all of these, the result type must be strictly 331 // wider or narrower (depending on the operation) than the source 332 // type. 333 334 // SIGN_EXTEND - Used for integer types, replicating the sign bit 335 // into new bits. 336 SIGN_EXTEND, 337 338 // ZERO_EXTEND - Used for integer types, zeroing the new bits. 339 ZERO_EXTEND, 340 341 // ANY_EXTEND - Used for integer types. The high bits are undefined. 342 ANY_EXTEND, 343 344 // TRUNCATE - Completely drop the high bits. 345 TRUNCATE, 346 347 // [SU]INT_TO_FP - These operators convert integers (whose interpreted sign 348 // depends on the first letter) to floating point. 349 SINT_TO_FP, 350 UINT_TO_FP, 351 352 // SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to 353 // sign extend a small value in a large integer register (e.g. sign 354 // extending the low 8 bits of a 32-bit register to fill the top 24 bits 355 // with the 7th bit). The size of the smaller type is indicated by the 1th 356 // operand, a ValueType node. 357 SIGN_EXTEND_INREG, 358 359 /// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned 360 /// integer. 361 FP_TO_SINT, 362 FP_TO_UINT, 363 364 /// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type 365 /// down to the precision of the destination VT. TRUNC is a flag, which is 366 /// always an integer that is zero or one. If TRUNC is 0, this is a 367 /// normal rounding, if it is 1, this FP_ROUND is known to not change the 368 /// value of Y. 369 /// 370 /// The TRUNC = 1 case is used in cases where we know that the value will 371 /// not be modified by the node, because Y is not using any of the extra 372 /// precision of source type. This allows certain transformations like 373 /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for 374 /// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed. 375 FP_ROUND, 376 377 // FLT_ROUNDS_ - Returns current rounding mode: 378 // -1 Undefined 379 // 0 Round to 0 380 // 1 Round to nearest 381 // 2 Round to +inf 382 // 3 Round to -inf 383 FLT_ROUNDS_, 384 385 /// X = FP_ROUND_INREG(Y, VT) - This operator takes an FP register, and 386 /// rounds it to a floating point value. It then promotes it and returns it 387 /// in a register of the same size. This operation effectively just 388 /// discards excess precision. The type to round down to is specified by 389 /// the VT operand, a VTSDNode. 390 FP_ROUND_INREG, 391 392 /// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type. 393 FP_EXTEND, 394 395 // BIT_CONVERT - This operator converts between integer, vector and FP 396 // values, as if the value was stored to memory with one type and loaded 397 // from the same address with the other type (or equivalently for vector 398 // format conversions, etc). The source and result are required to have 399 // the same bit size (e.g. f32 <-> i32). This can also be used for 400 // int-to-int or fp-to-fp conversions, but that is a noop, deleted by 401 // getNode(). 402 BIT_CONVERT, 403 404 // CONVERT_RNDSAT - This operator is used to support various conversions 405 // between various types (float, signed, unsigned and vectors of those 406 // types) with rounding and saturation. NOTE: Avoid using this operator as 407 // most target don't support it and the operator might be removed in the 408 // future. It takes the following arguments: 409 // 0) value 410 // 1) dest type (type to convert to) 411 // 2) src type (type to convert from) 412 // 3) rounding imm 413 // 4) saturation imm 414 // 5) ISD::CvtCode indicating the type of conversion to do 415 CONVERT_RNDSAT, 416 417 // FP16_TO_FP32, FP32_TO_FP16 - These operators are used to perform 418 // promotions and truncation for half-precision (16 bit) floating 419 // numbers. We need special nodes since FP16 is a storage-only type with 420 // special semantics of operations. 421 FP16_TO_FP32, FP32_TO_FP16, 422 423 // FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW, 424 // FLOG, FLOG2, FLOG10, FEXP, FEXP2, 425 // FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR - Perform various unary floating 426 // point operations. These are inspired by libm. 427 FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW, 428 FLOG, FLOG2, FLOG10, FEXP, FEXP2, 429 FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR, 430 431 // LOAD and STORE have token chains as their first operand, then the same 432 // operands as an LLVM load/store instruction, then an offset node that 433 // is added / subtracted from the base pointer to form the address (for 434 // indexed memory ops). 435 LOAD, STORE, 436 437 // DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned 438 // to a specified boundary. This node always has two return values: a new 439 // stack pointer value and a chain. The first operand is the token chain, 440 // the second is the number of bytes to allocate, and the third is the 441 // alignment boundary. The size is guaranteed to be a multiple of the stack 442 // alignment, and the alignment is guaranteed to be bigger than the stack 443 // alignment (if required) or 0 to get standard stack alignment. 444 DYNAMIC_STACKALLOC, 445 446 // Control flow instructions. These all have token chains. 447 448 // BR - Unconditional branch. The first operand is the chain 449 // operand, the second is the MBB to branch to. 450 BR, 451 452 // BRIND - Indirect branch. The first operand is the chain, the second 453 // is the value to branch to, which must be of the same type as the target's 454 // pointer type. 455 BRIND, 456 457 // BR_JT - Jumptable branch. The first operand is the chain, the second 458 // is the jumptable index, the last one is the jumptable entry index. 459 BR_JT, 460 461 // BRCOND - Conditional branch. The first operand is the chain, the 462 // second is the condition, the third is the block to branch to if the 463 // condition is true. If the type of the condition is not i1, then the 464 // high bits must conform to getBooleanContents. 465 BRCOND, 466 467 // BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in 468 // that the condition is represented as condition code, and two nodes to 469 // compare, rather than as a combined SetCC node. The operands in order are 470 // chain, cc, lhs, rhs, block to branch to if condition is true. 471 BR_CC, 472 473 // INLINEASM - Represents an inline asm block. This node always has two 474 // return values: a chain and a flag result. The inputs are as follows: 475 // Operand #0 : Input chain. 476 // Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string. 477 // Operand #2 : a MDNodeSDNode with the !srcloc metadata. 478 // After this, it is followed by a list of operands with this format: 479 // ConstantSDNode: Flags that encode whether it is a mem or not, the 480 // of operands that follow, etc. See InlineAsm.h. 481 // ... however many operands ... 482 // Operand #last: Optional, an incoming flag. 483 // 484 // The variable width operands are required to represent target addressing 485 // modes as a single "operand", even though they may have multiple 486 // SDOperands. 487 INLINEASM, 488 489 // EH_LABEL - Represents a label in mid basic block used to track 490 // locations needed for debug and exception handling tables. These nodes 491 // take a chain as input and return a chain. 492 EH_LABEL, 493 494 // STACKSAVE - STACKSAVE has one operand, an input chain. It produces a 495 // value, the same type as the pointer type for the system, and an output 496 // chain. 497 STACKSAVE, 498 499 // STACKRESTORE has two operands, an input chain and a pointer to restore to 500 // it returns an output chain. 501 STACKRESTORE, 502 503 // CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end of 504 // a call sequence, and carry arbitrary information that target might want 505 // to know. The first operand is a chain, the rest are specified by the 506 // target and not touched by the DAG optimizers. 507 // CALLSEQ_START..CALLSEQ_END pairs may not be nested. 508 CALLSEQ_START, // Beginning of a call sequence 509 CALLSEQ_END, // End of a call sequence 510 511 // VAARG - VAARG has three operands: an input chain, a pointer, and a 512 // SRCVALUE. It returns a pair of values: the vaarg value and a new chain. 513 VAARG, 514 515 // VACOPY - VACOPY has five operands: an input chain, a destination pointer, 516 // a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the 517 // source. 518 VACOPY, 519 520 // VAEND, VASTART - VAEND and VASTART have three operands: an input chain, a 521 // pointer, and a SRCVALUE. 522 VAEND, VASTART, 523 524 // SRCVALUE - This is a node type that holds a Value* that is used to 525 // make reference to a value in the LLVM IR. 526 SRCVALUE, 527 528 // MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to 529 // reference metadata in the IR. 530 MDNODE_SDNODE, 531 532 // PCMARKER - This corresponds to the pcmarker intrinsic. 533 PCMARKER, 534 535 // READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic. 536 // The only operand is a chain and a value and a chain are produced. The 537 // value is the contents of the architecture specific cycle counter like 538 // register (or other high accuracy low latency clock source) 539 READCYCLECOUNTER, 540 541 // HANDLENODE node - Used as a handle for various purposes. 542 HANDLENODE, 543 544 // TRAMPOLINE - This corresponds to the init_trampoline intrinsic. 545 // It takes as input a token chain, the pointer to the trampoline, 546 // the pointer to the nested function, the pointer to pass for the 547 // 'nest' parameter, a SRCVALUE for the trampoline and another for 548 // the nested function (allowing targets to access the original 549 // Function*). It produces the result of the intrinsic and a token 550 // chain as output. 551 TRAMPOLINE, 552 553 // TRAP - Trapping instruction 554 TRAP, 555 556 // PREFETCH - This corresponds to a prefetch intrinsic. It takes chains are 557 // their first operand. The other operands are the address to prefetch, 558 // read / write specifier, and locality specifier. 559 PREFETCH, 560 561 // OUTCHAIN = MEMBARRIER(INCHAIN, load-load, load-store, store-load, 562 // store-store, device) 563 // This corresponds to the memory.barrier intrinsic. 564 // it takes an input chain, 4 operands to specify the type of barrier, an 565 // operand specifying if the barrier applies to device and uncached memory 566 // and produces an output chain. 567 MEMBARRIER, 568 569 // Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap) 570 // this corresponds to the atomic.lcs intrinsic. 571 // cmp is compared to *ptr, and if equal, swap is stored in *ptr. 572 // the return is always the original value in *ptr 573 ATOMIC_CMP_SWAP, 574 575 // Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt) 576 // this corresponds to the atomic.swap intrinsic. 577 // amt is stored to *ptr atomically. 578 // the return is always the original value in *ptr 579 ATOMIC_SWAP, 580 581 // Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt) 582 // this corresponds to the atomic.load.[OpName] intrinsic. 583 // op(*ptr, amt) is stored to *ptr atomically. 584 // the return is always the original value in *ptr 585 ATOMIC_LOAD_ADD, 586 ATOMIC_LOAD_SUB, 587 ATOMIC_LOAD_AND, 588 ATOMIC_LOAD_OR, 589 ATOMIC_LOAD_XOR, 590 ATOMIC_LOAD_NAND, 591 ATOMIC_LOAD_MIN, 592 ATOMIC_LOAD_MAX, 593 ATOMIC_LOAD_UMIN, 594 ATOMIC_LOAD_UMAX, 595 596 /// BUILTIN_OP_END - This must be the last enum value in this list. 597 /// The target-specific pre-isel opcode values start here. 598 BUILTIN_OP_END 599 }; 600 601 /// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations 602 /// which do not reference a specific memory location should be less than 603 /// this value. Those that do must not be less than this value, and can 604 /// be used with SelectionDAG::getMemIntrinsicNode. 605 static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END+100; 606 607 //===--------------------------------------------------------------------===// 608 /// MemIndexedMode enum - This enum defines the load / store indexed 609 /// addressing modes. 610 /// 611 /// UNINDEXED "Normal" load / store. The effective address is already 612 /// computed and is available in the base pointer. The offset 613 /// operand is always undefined. In addition to producing a 614 /// chain, an unindexed load produces one value (result of the 615 /// load); an unindexed store does not produce a value. 616 /// 617 /// PRE_INC Similar to the unindexed mode where the effective address is 618 /// PRE_DEC the value of the base pointer add / subtract the offset. 619 /// It considers the computation as being folded into the load / 620 /// store operation (i.e. the load / store does the address 621 /// computation as well as performing the memory transaction). 622 /// The base operand is always undefined. In addition to 623 /// producing a chain, pre-indexed load produces two values 624 /// (result of the load and the result of the address 625 /// computation); a pre-indexed store produces one value (result 626 /// of the address computation). 627 /// 628 /// POST_INC The effective address is the value of the base pointer. The 629 /// POST_DEC value of the offset operand is then added to / subtracted 630 /// from the base after memory transaction. In addition to 631 /// producing a chain, post-indexed load produces two values 632 /// (the result of the load and the result of the base +/- offset 633 /// computation); a post-indexed store produces one value (the 634 /// the result of the base +/- offset computation). 635 /// 636 enum MemIndexedMode { 637 UNINDEXED = 0, 638 PRE_INC, 639 PRE_DEC, 640 POST_INC, 641 POST_DEC, 642 LAST_INDEXED_MODE 643 }; 644 645 //===--------------------------------------------------------------------===// 646 /// LoadExtType enum - This enum defines the three variants of LOADEXT 647 /// (load with extension). 648 /// 649 /// SEXTLOAD loads the integer operand and sign extends it to a larger 650 /// integer result type. 651 /// ZEXTLOAD loads the integer operand and zero extends it to a larger 652 /// integer result type. 653 /// EXTLOAD is used for three things: floating point extending loads, 654 /// integer extending loads [the top bits are undefined], and vector 655 /// extending loads [load into low elt]. 656 /// 657 enum LoadExtType { 658 NON_EXTLOAD = 0, 659 EXTLOAD, 660 SEXTLOAD, 661 ZEXTLOAD, 662 LAST_LOADEXT_TYPE 663 }; 664 665 //===--------------------------------------------------------------------===// 666 /// ISD::CondCode enum - These are ordered carefully to make the bitfields 667 /// below work out, when considering SETFALSE (something that never exists 668 /// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered 669 /// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal 670 /// to. If the "N" column is 1, the result of the comparison is undefined if 671 /// the input is a NAN. 672 /// 673 /// All of these (except for the 'always folded ops') should be handled for 674 /// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT, 675 /// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used. 676 /// 677 /// Note that these are laid out in a specific order to allow bit-twiddling 678 /// to transform conditions. 679 enum CondCode { 680 // Opcode N U L G E Intuitive operation 681 SETFALSE, // 0 0 0 0 Always false (always folded) 682 SETOEQ, // 0 0 0 1 True if ordered and equal 683 SETOGT, // 0 0 1 0 True if ordered and greater than 684 SETOGE, // 0 0 1 1 True if ordered and greater than or equal 685 SETOLT, // 0 1 0 0 True if ordered and less than 686 SETOLE, // 0 1 0 1 True if ordered and less than or equal 687 SETONE, // 0 1 1 0 True if ordered and operands are unequal 688 SETO, // 0 1 1 1 True if ordered (no nans) 689 SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y) 690 SETUEQ, // 1 0 0 1 True if unordered or equal 691 SETUGT, // 1 0 1 0 True if unordered or greater than 692 SETUGE, // 1 0 1 1 True if unordered, greater than, or equal 693 SETULT, // 1 1 0 0 True if unordered or less than 694 SETULE, // 1 1 0 1 True if unordered, less than, or equal 695 SETUNE, // 1 1 1 0 True if unordered or not equal 696 SETTRUE, // 1 1 1 1 Always true (always folded) 697 // Don't care operations: undefined if the input is a nan. 698 SETFALSE2, // 1 X 0 0 0 Always false (always folded) 699 SETEQ, // 1 X 0 0 1 True if equal 700 SETGT, // 1 X 0 1 0 True if greater than 701 SETGE, // 1 X 0 1 1 True if greater than or equal 702 SETLT, // 1 X 1 0 0 True if less than 703 SETLE, // 1 X 1 0 1 True if less than or equal 704 SETNE, // 1 X 1 1 0 True if not equal 705 SETTRUE2, // 1 X 1 1 1 Always true (always folded) 706 707 SETCC_INVALID // Marker value. 708 }; 709 710 /// isSignedIntSetCC - Return true if this is a setcc instruction that 711 /// performs a signed comparison when used with integer operands. 712 inline bool isSignedIntSetCC(CondCode Code) { 713 return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE; 714 } 715 716 /// isUnsignedIntSetCC - Return true if this is a setcc instruction that 717 /// performs an unsigned comparison when used with integer operands. 718 inline bool isUnsignedIntSetCC(CondCode Code) { 719 return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE; 720 } 721 722 /// isTrueWhenEqual - Return true if the specified condition returns true if 723 /// the two operands to the condition are equal. Note that if one of the two 724 /// operands is a NaN, this value is meaningless. 725 inline bool isTrueWhenEqual(CondCode Cond) { 726 return ((int)Cond & 1) != 0; 727 } 728 729 /// getUnorderedFlavor - This function returns 0 if the condition is always 730 /// false if an operand is a NaN, 1 if the condition is always true if the 731 /// operand is a NaN, and 2 if the condition is undefined if the operand is a 732 /// NaN. 733 inline unsigned getUnorderedFlavor(CondCode Cond) { 734 return ((int)Cond >> 3) & 3; 735 } 736 737 /// getSetCCInverse - Return the operation corresponding to !(X op Y), where 738 /// 'op' is a valid SetCC operation. 739 CondCode getSetCCInverse(CondCode Operation, bool isInteger); 740 741 /// getSetCCSwappedOperands - Return the operation corresponding to (Y op X) 742 /// when given the operation for (X op Y). 743 CondCode getSetCCSwappedOperands(CondCode Operation); 744 745 /// getSetCCOrOperation - Return the result of a logical OR between different 746 /// comparisons of identical values: ((X op1 Y) | (X op2 Y)). This 747 /// function returns SETCC_INVALID if it is not possible to represent the 748 /// resultant comparison. 749 CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, bool isInteger); 750 751 /// getSetCCAndOperation - Return the result of a logical AND between 752 /// different comparisons of identical values: ((X op1 Y) & (X op2 Y)). This 753 /// function returns SETCC_INVALID if it is not possible to represent the 754 /// resultant comparison. 755 CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, bool isInteger); 756 757 //===--------------------------------------------------------------------===// 758 /// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT 759 /// supports. 760 enum CvtCode { 761 CVT_FF, // Float from Float 762 CVT_FS, // Float from Signed 763 CVT_FU, // Float from Unsigned 764 CVT_SF, // Signed from Float 765 CVT_UF, // Unsigned from Float 766 CVT_SS, // Signed from Signed 767 CVT_SU, // Signed from Unsigned 768 CVT_US, // Unsigned from Signed 769 CVT_UU, // Unsigned from Unsigned 770 CVT_INVALID // Marker - Invalid opcode 771 }; 772 773} // end llvm::ISD namespace 774 775} // end llvm namespace 776 777#endif 778