1/*-
2 * Copyright (c) 2003-2008 Tim Kientzle
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17 * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 */
25
26#include "bsdtar_platform.h"
27__FBSDID("$FreeBSD: stable/11/contrib/libarchive/tar/bsdtar.c 358088 2020-02-19 01:50:47Z mm $");
28
29#ifdef HAVE_SYS_PARAM_H
30#include <sys/param.h>
31#endif
32#ifdef HAVE_SYS_STAT_H
33#include <sys/stat.h>
34#endif
35#ifdef HAVE_COPYFILE_H
36#include <copyfile.h>
37#endif
38#ifdef HAVE_ERRNO_H
39#include <errno.h>
40#endif
41#ifdef HAVE_FCNTL_H
42#include <fcntl.h>
43#endif
44#ifdef HAVE_LANGINFO_H
45#include <langinfo.h>
46#endif
47#ifdef HAVE_LOCALE_H
48#include <locale.h>
49#endif
50#ifdef HAVE_PATHS_H
51#include <paths.h>
52#endif
53#ifdef HAVE_SIGNAL_H
54#include <signal.h>
55#endif
56#include <stdio.h>
57#ifdef HAVE_STDLIB_H
58#include <stdlib.h>
59#endif
60#ifdef HAVE_STRING_H
61#include <string.h>
62#endif
63#ifdef HAVE_TIME_H
64#include <time.h>
65#endif
66#ifdef HAVE_UNISTD_H
67#include <unistd.h>
68#endif
69
70#include "bsdtar.h"
71#include "err.h"
72
73/*
74 * Per POSIX.1-1988, tar defaults to reading/writing archives to/from
75 * the default tape device for the system.  Pick something reasonable here.
76 */
77#ifdef __linux
78#define	_PATH_DEFTAPE "/dev/st0"
79#endif
80#if defined(_WIN32) && !defined(__CYGWIN__)
81#define	_PATH_DEFTAPE "\\\\.\\tape0"
82#endif
83#if defined(__APPLE__)
84#undef _PATH_DEFTAPE
85#define	_PATH_DEFTAPE "-"  /* Mac OS has no tape support, default to stdio. */
86#endif
87
88#ifndef _PATH_DEFTAPE
89#define	_PATH_DEFTAPE "/dev/tape"
90#endif
91
92#ifdef __MINGW32__
93int _CRT_glob = 0; /* Disable broken CRT globbing. */
94#endif
95
96#if defined(HAVE_SIGACTION) && (defined(SIGINFO) || defined(SIGUSR1))
97static volatile int siginfo_occurred;
98
99static void
100siginfo_handler(int sig)
101{
102	(void)sig; /* UNUSED */
103	siginfo_occurred = 1;
104}
105
106int
107need_report(void)
108{
109	int r = siginfo_occurred;
110	siginfo_occurred = 0;
111	return (r);
112}
113#else
114int
115need_report(void)
116{
117	return (0);
118}
119#endif
120
121static void		 long_help(void) __LA_DEAD;
122static void		 only_mode(struct bsdtar *, const char *opt,
123			     const char *valid);
124static void		 set_mode(struct bsdtar *, char opt);
125static void		 version(void) __LA_DEAD;
126
127/* A basic set of security flags to request from libarchive. */
128#define	SECURITY					\
129	(ARCHIVE_EXTRACT_SECURE_SYMLINKS		\
130	 | ARCHIVE_EXTRACT_SECURE_NODOTDOT)
131
132static char const * const vcs_files[] = {
133  /* CVS */
134  "CVS", ".cvsignore",
135  /* RCS */
136  "RCS",
137  /* SCCS */
138  "SCCS",
139  /* SVN */
140  ".svn",
141  /* git */
142  ".git", ".gitignore", ".gitattributes", ".gitmodules",
143  /* Arch */
144  ".arch-ids", "{arch}", "=RELEASE-ID", "=meta-update", "=update",
145  /* Bazaar */
146  ".bzr", ".bzrignore", ".bzrtags",
147  /* Mercurial */
148  ".hg", ".hgignore", ".hgtags",
149  /* darcs */
150  "_darcs",
151  NULL
152};
153
154int
155main(int argc, char **argv)
156{
157	struct bsdtar		*bsdtar, bsdtar_storage;
158	int			 opt, t;
159	char			 compression, compression2;
160	const char		*compression_name, *compression2_name;
161	const char		*compress_program;
162	char			*tptr;
163	char			 possible_help_request;
164	char			 buff[16];
165
166	/*
167	 * Use a pointer for consistency, but stack-allocated storage
168	 * for ease of cleanup.
169	 */
170	bsdtar = &bsdtar_storage;
171	memset(bsdtar, 0, sizeof(*bsdtar));
172	bsdtar->fd = -1; /* Mark as "unused" */
173	bsdtar->gid = -1;
174	bsdtar->uid = -1;
175	bsdtar->flags = 0;
176	compression = compression2 = '\0';
177	compression_name = compression2_name = NULL;
178	compress_program = NULL;
179
180#if defined(HAVE_SIGACTION)
181	{ /* Set up signal handling. */
182		struct sigaction sa;
183		sa.sa_handler = siginfo_handler;
184		sigemptyset(&sa.sa_mask);
185		sa.sa_flags = 0;
186#ifdef SIGINFO
187		if (sigaction(SIGINFO, &sa, NULL))
188			lafe_errc(1, errno, "sigaction(SIGINFO) failed");
189#endif
190#ifdef SIGUSR1
191		/* ... and treat SIGUSR1 the same way as SIGINFO. */
192		if (sigaction(SIGUSR1, &sa, NULL))
193			lafe_errc(1, errno, "sigaction(SIGUSR1) failed");
194#endif
195#ifdef SIGPIPE
196		/* Ignore SIGPIPE signals. */
197		sa.sa_handler = SIG_IGN;
198		sigaction(SIGPIPE, &sa, NULL);
199#endif
200	}
201#endif
202
203	/* Set lafe_progname before calling lafe_warnc. */
204	lafe_setprogname(*argv, "bsdtar");
205
206#if HAVE_SETLOCALE
207	if (setlocale(LC_ALL, "") == NULL)
208		lafe_warnc(0, "Failed to set default locale");
209#endif
210#if defined(HAVE_NL_LANGINFO) && defined(HAVE_D_MD_ORDER)
211	bsdtar->day_first = (*nl_langinfo(D_MD_ORDER) == 'd');
212#endif
213	possible_help_request = 0;
214
215	/* Look up uid of current user for future reference */
216	bsdtar->user_uid = geteuid();
217
218	/* Default: open tape drive. */
219	bsdtar->filename = getenv("TAPE");
220	if (bsdtar->filename == NULL)
221		bsdtar->filename = _PATH_DEFTAPE;
222
223	/* Default block size settings. */
224	bsdtar->bytes_per_block = DEFAULT_BYTES_PER_BLOCK;
225	/* Allow library to default this unless user specifies -b. */
226	bsdtar->bytes_in_last_block = -1;
227
228	/* Default: preserve mod time on extract */
229	bsdtar->extract_flags = ARCHIVE_EXTRACT_TIME;
230
231	/* Default: Perform basic security checks. */
232	bsdtar->extract_flags |= SECURITY;
233
234#ifndef _WIN32
235	/* On POSIX systems, assume --same-owner and -p when run by
236	 * the root user.  This doesn't make any sense on Windows. */
237	if (bsdtar->user_uid == 0) {
238		/* --same-owner */
239		bsdtar->extract_flags |= ARCHIVE_EXTRACT_OWNER;
240		/* -p */
241		bsdtar->extract_flags |= ARCHIVE_EXTRACT_PERM;
242		bsdtar->extract_flags |= ARCHIVE_EXTRACT_ACL;
243		bsdtar->extract_flags |= ARCHIVE_EXTRACT_XATTR;
244		bsdtar->extract_flags |= ARCHIVE_EXTRACT_FFLAGS;
245		bsdtar->extract_flags |= ARCHIVE_EXTRACT_MAC_METADATA;
246	}
247#endif
248
249	/*
250	 * Enable Mac OS "copyfile()" extension by default.
251	 * This has no effect on other platforms.
252	 */
253	bsdtar->readdisk_flags |= ARCHIVE_READDISK_MAC_COPYFILE;
254#ifdef COPYFILE_DISABLE_VAR
255	if (getenv(COPYFILE_DISABLE_VAR))
256		bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_MAC_COPYFILE;
257#endif
258#if defined(__APPLE__)
259	/*
260	 * On Mac OS ACLs are archived with copyfile() (--mac-metadata)
261	 * Translation to NFSv4 ACLs has to be requested explicitly with --acls
262	 */
263	bsdtar->readdisk_flags |= ARCHIVE_READDISK_NO_ACL;
264#endif
265
266	bsdtar->matching = archive_match_new();
267	if (bsdtar->matching == NULL)
268		lafe_errc(1, errno, "Out of memory");
269	bsdtar->cset = cset_new();
270	if (bsdtar->cset == NULL)
271		lafe_errc(1, errno, "Out of memory");
272
273	bsdtar->argv = argv;
274	bsdtar->argc = argc;
275
276	/*
277	 * Comments following each option indicate where that option
278	 * originated:  SUSv2, POSIX, GNU tar, star, etc.  If there's
279	 * no such comment, then I don't know of anyone else who
280	 * implements that option.
281	 */
282	while ((opt = bsdtar_getopt(bsdtar)) != -1) {
283		switch (opt) {
284		case 'a': /* GNU tar */
285			bsdtar->flags |= OPTFLAG_AUTO_COMPRESS;
286			break;
287		case OPTION_ACLS: /* GNU tar */
288			bsdtar->extract_flags |= ARCHIVE_EXTRACT_ACL;
289			bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_NO_ACL;
290			bsdtar->flags |= OPTFLAG_ACLS;
291			break;
292		case 'B': /* GNU tar */
293			/* libarchive doesn't need this; just ignore it. */
294			break;
295		case 'b': /* SUSv2 */
296			errno = 0;
297			tptr = NULL;
298			t = (int)strtol(bsdtar->argument, &tptr, 10);
299			if (errno || t <= 0 || t > 8192 ||
300			    *(bsdtar->argument) == '\0' || tptr == NULL ||
301			    *tptr != '\0') {
302				lafe_errc(1, 0, "Invalid or out of range "
303				    "(1..8192) argument to -b");
304			}
305			bsdtar->bytes_per_block = 512 * t;
306			/* Explicit -b forces last block size. */
307			bsdtar->bytes_in_last_block = bsdtar->bytes_per_block;
308			break;
309		case OPTION_B64ENCODE:
310			if (compression2 != '\0')
311				lafe_errc(1, 0,
312				    "Can't specify both --uuencode and "
313				    "--b64encode");
314			compression2 = opt;
315			compression2_name = "b64encode";
316			break;
317		case 'C': /* GNU tar */
318			if (strlen(bsdtar->argument) == 0)
319				lafe_errc(1, 0,
320				    "Meaningless option: -C ''");
321
322			set_chdir(bsdtar, bsdtar->argument);
323			break;
324		case 'c': /* SUSv2 */
325			set_mode(bsdtar, opt);
326			break;
327		case OPTION_CHECK_LINKS: /* GNU tar */
328			bsdtar->flags |= OPTFLAG_WARN_LINKS;
329			break;
330		case OPTION_CHROOT: /* NetBSD */
331			bsdtar->flags |= OPTFLAG_CHROOT;
332			break;
333		case OPTION_CLEAR_NOCHANGE_FFLAGS:
334			bsdtar->extract_flags |=
335			    ARCHIVE_EXTRACT_CLEAR_NOCHANGE_FFLAGS;
336			break;
337		case OPTION_EXCLUDE: /* GNU tar */
338			if (archive_match_exclude_pattern(
339			    bsdtar->matching, bsdtar->argument) != ARCHIVE_OK)
340				lafe_errc(1, 0,
341				    "Couldn't exclude %s\n", bsdtar->argument);
342			break;
343		case OPTION_EXCLUDE_VCS: /* GNU tar */
344			for(t=0; vcs_files[t]; t++) {
345				if (archive_match_exclude_pattern(
346				    bsdtar->matching,
347				    vcs_files[t]) != ARCHIVE_OK)
348					lafe_errc(1, 0, "Couldn't "
349					    "exclude %s\n", vcs_files[t]);
350			}
351			break;
352		case OPTION_FFLAGS:
353			bsdtar->extract_flags |= ARCHIVE_EXTRACT_FFLAGS;
354			bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_NO_FFLAGS;
355			bsdtar->flags |= OPTFLAG_FFLAGS;
356			break;
357		case OPTION_FORMAT: /* GNU tar, others */
358			cset_set_format(bsdtar->cset, bsdtar->argument);
359			break;
360		case 'f': /* SUSv2 */
361			bsdtar->filename = bsdtar->argument;
362			break;
363		case OPTION_GID: /* cpio */
364			errno = 0;
365			tptr = NULL;
366			t = (int)strtol(bsdtar->argument, &tptr, 10);
367			if (errno || t < 0 || *(bsdtar->argument) == '\0' ||
368			    tptr == NULL || *tptr != '\0') {
369				lafe_errc(1, 0, "Invalid argument to --gid");
370			}
371			bsdtar->gid = t;
372			break;
373		case OPTION_GNAME: /* cpio */
374			bsdtar->gname = bsdtar->argument;
375			break;
376		case OPTION_GRZIP:
377			if (compression != '\0')
378				lafe_errc(1, 0,
379				    "Can't specify both -%c and -%c", opt,
380				    compression);
381			compression = opt;
382			compression_name = "grzip";
383			break;
384		case 'H': /* BSD convention */
385			bsdtar->symlink_mode = 'H';
386			break;
387		case 'h': /* Linux Standards Base, gtar; synonym for -L */
388			bsdtar->symlink_mode = 'L';
389			/* Hack: -h by itself is the "help" command. */
390			possible_help_request = 1;
391			break;
392		case OPTION_HELP: /* GNU tar, others */
393			long_help();
394			exit(0);
395			break;
396		case OPTION_HFS_COMPRESSION: /* Mac OS X v10.6 or later */
397			bsdtar->extract_flags |=
398			    ARCHIVE_EXTRACT_HFS_COMPRESSION_FORCED;
399			break;
400		case OPTION_IGNORE_ZEROS:
401			bsdtar->flags |= OPTFLAG_IGNORE_ZEROS;
402			break;
403		case 'I': /* GNU tar */
404			/*
405			 * TODO: Allow 'names' to come from an archive,
406			 * not just a text file.  Design a good UI for
407			 * allowing names and mode/owner to be read
408			 * from an archive, with contents coming from
409			 * disk.  This can be used to "refresh" an
410			 * archive or to design archives with special
411			 * permissions without having to create those
412			 * permissions on disk.
413			 */
414			bsdtar->names_from_file = bsdtar->argument;
415			break;
416		case OPTION_INCLUDE:
417			/*
418			 * No one else has the @archive extension, so
419			 * no one else needs this to filter entries
420			 * when transforming archives.
421			 */
422			if (archive_match_include_pattern(bsdtar->matching,
423			    bsdtar->argument) != ARCHIVE_OK)
424				lafe_errc(1, 0,
425				    "Failed to add %s to inclusion list",
426				    bsdtar->argument);
427			break;
428		case 'j': /* GNU tar */
429			if (compression != '\0')
430				lafe_errc(1, 0,
431				    "Can't specify both -%c and -%c", opt,
432				    compression);
433			compression = opt;
434			compression_name = "bzip2";
435			break;
436		case 'J': /* GNU tar 1.21 and later */
437			if (compression != '\0')
438				lafe_errc(1, 0,
439				    "Can't specify both -%c and -%c", opt,
440				    compression);
441			compression = opt;
442			compression_name = "xz";
443			break;
444		case 'k': /* GNU tar */
445			bsdtar->extract_flags |= ARCHIVE_EXTRACT_NO_OVERWRITE;
446			break;
447		case OPTION_KEEP_NEWER_FILES: /* GNU tar */
448			bsdtar->extract_flags |= ARCHIVE_EXTRACT_NO_OVERWRITE_NEWER;
449			break;
450		case 'L': /* BSD convention */
451			bsdtar->symlink_mode = 'L';
452			break;
453	        case 'l': /* SUSv2 and GNU tar beginning with 1.16 */
454			/* GNU tar 1.13  used -l for --one-file-system */
455			bsdtar->flags |= OPTFLAG_WARN_LINKS;
456			break;
457		case OPTION_LRZIP:
458		case OPTION_LZ4:
459		case OPTION_LZIP: /* GNU tar beginning with 1.23 */
460		case OPTION_LZMA: /* GNU tar beginning with 1.20 */
461		case OPTION_LZOP: /* GNU tar beginning with 1.21 */
462		case OPTION_ZSTD:
463			if (compression != '\0')
464				lafe_errc(1, 0,
465				    "Can't specify both -%c and -%c", opt,
466				    compression);
467			compression = opt;
468			switch (opt) {
469			case OPTION_LRZIP: compression_name = "lrzip"; break;
470			case OPTION_LZ4:  compression_name = "lz4"; break;
471			case OPTION_LZIP: compression_name = "lzip"; break;
472			case OPTION_LZMA: compression_name = "lzma"; break;
473			case OPTION_LZOP: compression_name = "lzop"; break;
474			case OPTION_ZSTD: compression_name = "zstd"; break;
475			}
476			break;
477		case 'm': /* SUSv2 */
478			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_TIME;
479			break;
480		case OPTION_MAC_METADATA: /* Mac OS X */
481			bsdtar->readdisk_flags |= ARCHIVE_READDISK_MAC_COPYFILE;
482			bsdtar->extract_flags |= ARCHIVE_EXTRACT_MAC_METADATA;
483			bsdtar->flags |= OPTFLAG_MAC_METADATA;
484			break;
485		case 'n': /* GNU tar */
486			bsdtar->flags |= OPTFLAG_NO_SUBDIRS;
487			break;
488	        /*
489		 * Selecting files by time:
490		 *    --newer-?time='date' Only files newer than 'date'
491		 *    --newer-?time-than='file' Only files newer than time
492		 *         on specified file (useful for incremental backups)
493		 */
494		case OPTION_NEWER_CTIME: /* GNU tar */
495			if (archive_match_include_date(bsdtar->matching,
496			    ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_NEWER,
497			    bsdtar->argument) != ARCHIVE_OK)
498				lafe_errc(1, 0, "Error : %s",
499				    archive_error_string(bsdtar->matching));
500			break;
501		case OPTION_NEWER_CTIME_THAN:
502			if (archive_match_include_file_time(bsdtar->matching,
503			    ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_NEWER,
504			    bsdtar->argument) != ARCHIVE_OK)
505				lafe_errc(1, 0, "Error : %s",
506				    archive_error_string(bsdtar->matching));
507			break;
508		case OPTION_NEWER_MTIME: /* GNU tar */
509			if (archive_match_include_date(bsdtar->matching,
510			    ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_NEWER,
511			    bsdtar->argument) != ARCHIVE_OK)
512				lafe_errc(1, 0, "Error : %s",
513				    archive_error_string(bsdtar->matching));
514			break;
515		case OPTION_NEWER_MTIME_THAN:
516			if (archive_match_include_file_time(bsdtar->matching,
517			    ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_NEWER,
518			    bsdtar->argument) != ARCHIVE_OK)
519				lafe_errc(1, 0, "Error : %s",
520				    archive_error_string(bsdtar->matching));
521			break;
522		case OPTION_NODUMP: /* star */
523			bsdtar->readdisk_flags |= ARCHIVE_READDISK_HONOR_NODUMP;
524			break;
525		case OPTION_NOPRESERVE_HFS_COMPRESSION:
526			/* Mac OS X v10.6 or later */
527			bsdtar->extract_flags |=
528			    ARCHIVE_EXTRACT_NO_HFS_COMPRESSION;
529			break;
530		case OPTION_NO_ACLS: /* GNU tar */
531			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_ACL;
532			bsdtar->readdisk_flags |= ARCHIVE_READDISK_NO_ACL;
533			bsdtar->flags |= OPTFLAG_NO_ACLS;
534			break;
535		case OPTION_NO_FFLAGS:
536			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_FFLAGS;
537			bsdtar->readdisk_flags |= ARCHIVE_READDISK_NO_FFLAGS;
538			bsdtar->flags |= OPTFLAG_NO_FFLAGS;
539			break;
540		case OPTION_NO_MAC_METADATA: /* Mac OS X */
541			bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_MAC_COPYFILE;
542			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_MAC_METADATA;
543			bsdtar->flags |= OPTFLAG_NO_MAC_METADATA;
544			break;
545		case OPTION_NO_SAFE_WRITES:
546			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_SAFE_WRITES;
547			break;
548		case OPTION_NO_SAME_OWNER: /* GNU tar */
549			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_OWNER;
550			break;
551		case OPTION_NO_SAME_PERMISSIONS: /* GNU tar */
552			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_PERM;
553			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_ACL;
554			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_XATTR;
555			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_FFLAGS;
556			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_MAC_METADATA;
557			break;
558		case OPTION_NO_XATTRS: /* GNU tar */
559			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_XATTR;
560			bsdtar->readdisk_flags |= ARCHIVE_READDISK_NO_XATTR;
561			bsdtar->flags |= OPTFLAG_NO_XATTRS;
562			break;
563		case OPTION_NULL: /* GNU tar */
564			bsdtar->flags |= OPTFLAG_NULL;
565			break;
566		case OPTION_NUMERIC_OWNER: /* GNU tar */
567			bsdtar->uname = "";
568			bsdtar->gname = "";
569			bsdtar->flags |= OPTFLAG_NUMERIC_OWNER;
570			break;
571		case 'O': /* GNU tar */
572			bsdtar->flags |= OPTFLAG_STDOUT;
573			break;
574		case 'o': /* SUSv2 and GNU conflict here, but not fatally */
575			bsdtar->flags |= OPTFLAG_O;
576			break;
577	        /*
578		 * Selecting files by time:
579		 *    --older-?time='date' Only files older than 'date'
580		 *    --older-?time-than='file' Only files older than time
581		 *         on specified file
582		 */
583		case OPTION_OLDER_CTIME:
584			if (archive_match_include_date(bsdtar->matching,
585			    ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_OLDER,
586			    bsdtar->argument) != ARCHIVE_OK)
587				lafe_errc(1, 0, "Error : %s",
588				    archive_error_string(bsdtar->matching));
589			break;
590		case OPTION_OLDER_CTIME_THAN:
591			if (archive_match_include_file_time(bsdtar->matching,
592			    ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_OLDER,
593			    bsdtar->argument) != ARCHIVE_OK)
594				lafe_errc(1, 0, "Error : %s",
595				    archive_error_string(bsdtar->matching));
596			break;
597		case OPTION_OLDER_MTIME:
598			if (archive_match_include_date(bsdtar->matching,
599			    ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_OLDER,
600			    bsdtar->argument) != ARCHIVE_OK)
601				lafe_errc(1, 0, "Error : %s",
602				    archive_error_string(bsdtar->matching));
603			break;
604		case OPTION_OLDER_MTIME_THAN:
605			if (archive_match_include_file_time(bsdtar->matching,
606			    ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_OLDER,
607			    bsdtar->argument) != ARCHIVE_OK)
608				lafe_errc(1, 0, "Error : %s",
609				    archive_error_string(bsdtar->matching));
610			break;
611		case OPTION_ONE_FILE_SYSTEM: /* GNU tar */
612			bsdtar->readdisk_flags |=
613			    ARCHIVE_READDISK_NO_TRAVERSE_MOUNTS;
614			break;
615		case OPTION_OPTIONS:
616			bsdtar->option_options = bsdtar->argument;
617			break;
618#if 0
619		/*
620		 * The common BSD -P option is not necessary, since
621		 * our default is to archive symlinks, not follow
622		 * them.  This is convenient, as -P conflicts with GNU
623		 * tar anyway.
624		 */
625		case 'P': /* BSD convention */
626			/* Default behavior, no option necessary. */
627			break;
628#endif
629		case 'P': /* GNU tar */
630			bsdtar->extract_flags &= ~SECURITY;
631			bsdtar->flags |= OPTFLAG_ABSOLUTE_PATHS;
632			break;
633		case 'p': /* GNU tar, star */
634			bsdtar->extract_flags |= ARCHIVE_EXTRACT_PERM;
635			bsdtar->extract_flags |= ARCHIVE_EXTRACT_ACL;
636			bsdtar->extract_flags |= ARCHIVE_EXTRACT_XATTR;
637			bsdtar->extract_flags |= ARCHIVE_EXTRACT_FFLAGS;
638			bsdtar->extract_flags |= ARCHIVE_EXTRACT_MAC_METADATA;
639			break;
640		case OPTION_PASSPHRASE:
641			bsdtar->passphrase = bsdtar->argument;
642			break;
643		case OPTION_POSIX: /* GNU tar */
644			cset_set_format(bsdtar->cset, "pax");
645			break;
646		case 'q': /* FreeBSD GNU tar --fast-read, NetBSD -q */
647			bsdtar->flags |= OPTFLAG_FAST_READ;
648			break;
649		case 'r': /* SUSv2 */
650			set_mode(bsdtar, opt);
651			break;
652		case 'S': /* NetBSD pax-as-tar */
653			bsdtar->extract_flags |= ARCHIVE_EXTRACT_SPARSE;
654			break;
655		case 's': /* NetBSD pax-as-tar */
656#if defined(HAVE_REGEX_H) || defined(HAVE_PCREPOSIX_H)
657			add_substitution(bsdtar, bsdtar->argument);
658#else
659			lafe_warnc(0,
660			    "-s is not supported by this version of bsdtar");
661			usage();
662#endif
663			break;
664		case OPTION_SAFE_WRITES:
665			bsdtar->extract_flags |= ARCHIVE_EXTRACT_SAFE_WRITES;
666			break;
667		case OPTION_SAME_OWNER: /* GNU tar */
668			bsdtar->extract_flags |= ARCHIVE_EXTRACT_OWNER;
669			break;
670		case OPTION_STRIP_COMPONENTS: /* GNU tar 1.15 */
671			errno = 0;
672			tptr = NULL;
673			t = (int)strtol(bsdtar->argument, &tptr, 10);
674			if (errno || t < 0 || *(bsdtar->argument) == '\0' ||
675			    tptr == NULL || *tptr != '\0') {
676				lafe_errc(1, 0, "Invalid argument to "
677				    "--strip-components");
678			}
679			bsdtar->strip_components = t;
680			break;
681		case 'T': /* GNU tar */
682			bsdtar->names_from_file = bsdtar->argument;
683			break;
684		case 't': /* SUSv2 */
685			set_mode(bsdtar, opt);
686			bsdtar->verbose++;
687			break;
688		case OPTION_TOTALS: /* GNU tar */
689			bsdtar->flags |= OPTFLAG_TOTALS;
690			break;
691		case 'U': /* GNU tar */
692			bsdtar->extract_flags |= ARCHIVE_EXTRACT_UNLINK;
693			bsdtar->flags |= OPTFLAG_UNLINK_FIRST;
694			break;
695		case 'u': /* SUSv2 */
696			set_mode(bsdtar, opt);
697			break;
698		case OPTION_UID: /* cpio */
699			errno = 0;
700			tptr = NULL;
701			t = (int)strtol(bsdtar->argument, &tptr, 10);
702			if (errno || t < 0 || *(bsdtar->argument) == '\0' ||
703			    tptr == NULL || *tptr != '\0') {
704				lafe_errc(1, 0, "Invalid argument to --uid");
705			}
706			bsdtar->uid = t;
707			break;
708		case OPTION_UNAME: /* cpio */
709			bsdtar->uname = bsdtar->argument;
710			break;
711		case OPTION_UUENCODE:
712			if (compression2 != '\0')
713				lafe_errc(1, 0,
714				    "Can't specify both --uuencode and "
715				    "--b64encode");
716			compression2 = opt;
717			compression2_name = "uuencode";
718			break;
719		case 'v': /* SUSv2 */
720			bsdtar->verbose++;
721			break;
722		case OPTION_VERSION: /* GNU convention */
723			version();
724			break;
725#if 0
726		/*
727		 * The -W longopt feature is handled inside of
728		 * bsdtar_getopt(), so -W is not available here.
729		 */
730		case 'W': /* Obscure GNU convention. */
731			break;
732#endif
733		case 'w': /* SUSv2 */
734			bsdtar->flags |= OPTFLAG_INTERACTIVE;
735			break;
736		case 'X': /* GNU tar */
737			if (archive_match_exclude_pattern_from_file(
738			    bsdtar->matching, bsdtar->argument, 0)
739			    != ARCHIVE_OK)
740				lafe_errc(1, 0, "Error : %s",
741				    archive_error_string(bsdtar->matching));
742			break;
743		case 'x': /* SUSv2 */
744			set_mode(bsdtar, opt);
745			break;
746		case OPTION_XATTRS: /* GNU tar */
747			bsdtar->extract_flags |= ARCHIVE_EXTRACT_XATTR;
748			bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_NO_XATTR;
749			bsdtar->flags |= OPTFLAG_XATTRS;
750			break;
751		case 'y': /* FreeBSD version of GNU tar */
752			if (compression != '\0')
753				lafe_errc(1, 0,
754				    "Can't specify both -%c and -%c", opt,
755				    compression);
756			compression = opt;
757			compression_name = "bzip2";
758			break;
759		case 'Z': /* GNU tar */
760			if (compression != '\0')
761				lafe_errc(1, 0,
762				    "Can't specify both -%c and -%c", opt,
763				    compression);
764			compression = opt;
765			compression_name = "compress";
766			break;
767		case 'z': /* GNU tar, star, many others */
768			if (compression != '\0')
769				lafe_errc(1, 0,
770				    "Can't specify both -%c and -%c", opt,
771				    compression);
772			compression = opt;
773			compression_name = "gzip";
774			break;
775		case OPTION_USE_COMPRESS_PROGRAM:
776			compress_program = bsdtar->argument;
777			break;
778		default:
779			usage();
780		}
781	}
782
783	/*
784	 * Sanity-check options.
785	 */
786
787	/* If no "real" mode was specified, treat -h as --help. */
788	if ((bsdtar->mode == '\0') && possible_help_request) {
789		long_help();
790		exit(0);
791	}
792
793	/* Otherwise, a mode is required. */
794	if (bsdtar->mode == '\0')
795		lafe_errc(1, 0,
796		    "Must specify one of -c, -r, -t, -u, -x");
797
798	/* Check boolean options only permitted in certain modes. */
799	if (bsdtar->flags & OPTFLAG_AUTO_COMPRESS)
800		only_mode(bsdtar, "-a", "c");
801	if (bsdtar->readdisk_flags & ARCHIVE_READDISK_NO_TRAVERSE_MOUNTS)
802		only_mode(bsdtar, "--one-file-system", "cru");
803	if (bsdtar->flags & OPTFLAG_FAST_READ)
804		only_mode(bsdtar, "--fast-read", "xt");
805	if (bsdtar->extract_flags & ARCHIVE_EXTRACT_HFS_COMPRESSION_FORCED)
806		only_mode(bsdtar, "--hfsCompression", "x");
807	if (bsdtar->extract_flags & ARCHIVE_EXTRACT_NO_HFS_COMPRESSION)
808		only_mode(bsdtar, "--nopreserveHFSCompression", "x");
809	if (bsdtar->readdisk_flags & ARCHIVE_READDISK_HONOR_NODUMP)
810		only_mode(bsdtar, "--nodump", "cru");
811	if (bsdtar->flags & OPTFLAG_ACLS)
812		only_mode(bsdtar, "--acls", "crux");
813	if (bsdtar->flags & OPTFLAG_NO_ACLS)
814		only_mode(bsdtar, "--no-acls", "crux");
815	if (bsdtar->flags & OPTFLAG_XATTRS)
816		only_mode(bsdtar, "--xattrs", "crux");
817	if (bsdtar->flags & OPTFLAG_NO_XATTRS)
818		only_mode(bsdtar, "--no-xattrs", "crux");
819	if (bsdtar->flags & OPTFLAG_FFLAGS)
820		only_mode(bsdtar, "--fflags", "crux");
821	if (bsdtar->flags & OPTFLAG_NO_FFLAGS)
822		only_mode(bsdtar, "--no-fflags", "crux");
823	if (bsdtar->flags & OPTFLAG_MAC_METADATA)
824		only_mode(bsdtar, "--mac-metadata", "crux");
825	if (bsdtar->flags & OPTFLAG_NO_MAC_METADATA)
826		only_mode(bsdtar, "--no-mac-metadata", "crux");
827	if (bsdtar->flags & OPTFLAG_O) {
828		switch (bsdtar->mode) {
829		case 'c':
830			/*
831			 * In GNU tar, -o means "old format."  The
832			 * "ustar" format is the closest thing
833			 * supported by libarchive.
834			 */
835			cset_set_format(bsdtar->cset, "ustar");
836			/* TODO: bsdtar->create_format = "v7"; */
837			break;
838		case 'x':
839			/* POSIX-compatible behavior. */
840			bsdtar->flags |= OPTFLAG_NO_OWNER;
841			bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_OWNER;
842			break;
843		default:
844			only_mode(bsdtar, "-o", "xc");
845			break;
846		}
847	}
848	if (bsdtar->flags & OPTFLAG_STDOUT)
849		only_mode(bsdtar, "-O", "xt");
850	if (bsdtar->flags & OPTFLAG_UNLINK_FIRST)
851		only_mode(bsdtar, "-U", "x");
852	if (bsdtar->flags & OPTFLAG_WARN_LINKS)
853		only_mode(bsdtar, "--check-links", "cr");
854
855	if ((bsdtar->flags & OPTFLAG_AUTO_COMPRESS) &&
856	    cset_auto_compress(bsdtar->cset, bsdtar->filename)) {
857		/* Ignore specified compressions if auto-compress works. */
858		compression = '\0';
859		compression2 = '\0';
860	}
861	/* Check other parameters only permitted in certain modes. */
862	if (compress_program != NULL) {
863		only_mode(bsdtar, "--use-compress-program", "cxt");
864		cset_add_filter_program(bsdtar->cset, compress_program);
865		/* Ignore specified compressions. */
866		compression = '\0';
867		compression2 = '\0';
868	}
869	if (compression != '\0') {
870		switch (compression) {
871		case 'J': case 'j': case 'y': case 'Z': case 'z':
872			strcpy(buff, "-?");
873			buff[1] = compression;
874			break;
875		default:
876			strcpy(buff, "--");
877			strcat(buff, compression_name);
878			break;
879		}
880		only_mode(bsdtar, buff, "cxt");
881		cset_add_filter(bsdtar->cset, compression_name);
882	}
883	if (compression2 != '\0') {
884		strcpy(buff, "--");
885		strcat(buff, compression2_name);
886		only_mode(bsdtar, buff, "cxt");
887		cset_add_filter(bsdtar->cset, compression2_name);
888	}
889	if (cset_get_format(bsdtar->cset) != NULL)
890		only_mode(bsdtar, "--format", "cru");
891	if (bsdtar->symlink_mode != '\0') {
892		strcpy(buff, "-?");
893		buff[1] = bsdtar->symlink_mode;
894		only_mode(bsdtar, buff, "cru");
895	}
896
897	/*
898	 * When creating an archive from a directory tree, the directory
899	 * walking code will already avoid entering directories when
900	 * recursive inclusion of directory content is disabled, therefore
901	 * changing the matching behavior has no effect for creation modes.
902	 * It is relevant for extraction or listing.
903	 */
904	archive_match_set_inclusion_recursion(bsdtar->matching,
905					      !(bsdtar->flags & OPTFLAG_NO_SUBDIRS));
906
907	/* Filename "-" implies stdio. */
908	if (strcmp(bsdtar->filename, "-") == 0)
909		bsdtar->filename = NULL;
910
911	switch(bsdtar->mode) {
912	case 'c':
913		tar_mode_c(bsdtar);
914		break;
915	case 'r':
916		tar_mode_r(bsdtar);
917		break;
918	case 't':
919		tar_mode_t(bsdtar);
920		break;
921	case 'u':
922		tar_mode_u(bsdtar);
923		break;
924	case 'x':
925		tar_mode_x(bsdtar);
926		break;
927	}
928
929	archive_match_free(bsdtar->matching);
930#if defined(HAVE_REGEX_H) || defined(HAVE_PCREPOSIX_H)
931	cleanup_substitution(bsdtar);
932#endif
933	cset_free(bsdtar->cset);
934	passphrase_free(bsdtar->ppbuff);
935
936	if (bsdtar->return_value != 0)
937		lafe_warnc(0,
938		    "Error exit delayed from previous errors.");
939	return (bsdtar->return_value);
940}
941
942static void
943set_mode(struct bsdtar *bsdtar, char opt)
944{
945	if (bsdtar->mode != '\0' && bsdtar->mode != opt)
946		lafe_errc(1, 0,
947		    "Can't specify both -%c and -%c", opt, bsdtar->mode);
948	bsdtar->mode = opt;
949}
950
951/*
952 * Verify that the mode is correct.
953 */
954static void
955only_mode(struct bsdtar *bsdtar, const char *opt, const char *valid_modes)
956{
957	if (strchr(valid_modes, bsdtar->mode) == NULL)
958		lafe_errc(1, 0,
959		    "Option %s is not permitted in mode -%c",
960		    opt, bsdtar->mode);
961}
962
963
964void
965usage(void)
966{
967	const char	*p;
968
969	p = lafe_getprogname();
970
971	fprintf(stderr, "Usage:\n");
972	fprintf(stderr, "  List:    %s -tf <archive-filename>\n", p);
973	fprintf(stderr, "  Extract: %s -xf <archive-filename>\n", p);
974	fprintf(stderr, "  Create:  %s -cf <archive-filename> [filenames...]\n", p);
975	fprintf(stderr, "  Help:    %s --help\n", p);
976	exit(1);
977}
978
979static void
980version(void)
981{
982	printf("bsdtar %s - %s \n",
983	    BSDTAR_VERSION_STRING,
984	    archive_version_details());
985	exit(0);
986}
987
988static const char *long_help_msg =
989	"First option must be a mode specifier:\n"
990	"  -c Create  -r Add/Replace  -t List  -u Update  -x Extract\n"
991	"Common Options:\n"
992	"  -b #  Use # 512-byte records per I/O block\n"
993	"  -f <filename>  Location of archive (default " _PATH_DEFTAPE ")\n"
994	"  -v    Verbose\n"
995	"  -w    Interactive\n"
996	"Create: %p -c [options] [<file> | <dir> | @<archive> | -C <dir> ]\n"
997	"  <file>, <dir>  add these items to archive\n"
998	"  -z, -j, -J, --lzma  Compress archive with gzip/bzip2/xz/lzma\n"
999	"  --format {ustar|pax|cpio|shar}  Select archive format\n"
1000	"  --exclude <pattern>  Skip files that match pattern\n"
1001	"  -C <dir>  Change to <dir> before processing remaining files\n"
1002	"  @<archive>  Add entries from <archive> to output\n"
1003	"List: %p -t [options] [<patterns>]\n"
1004	"  <patterns>  If specified, list only entries that match\n"
1005	"Extract: %p -x [options] [<patterns>]\n"
1006	"  <patterns>  If specified, extract only entries that match\n"
1007	"  -k    Keep (don't overwrite) existing files\n"
1008	"  -m    Don't restore modification times\n"
1009	"  -O    Write entries to stdout, don't restore to disk\n"
1010	"  -p    Restore permissions (including ACLs, owner, file flags)\n";
1011
1012
1013/*
1014 * Note that the word 'bsdtar' will always appear in the first line
1015 * of output.
1016 *
1017 * In particular, /bin/sh scripts that need to test for the presence
1018 * of bsdtar can use the following template:
1019 *
1020 * if (tar --help 2>&1 | grep bsdtar >/dev/null 2>&1 ) then \
1021 *          echo bsdtar; else echo not bsdtar; fi
1022 */
1023static void
1024long_help(void)
1025{
1026	const char	*prog;
1027	const char	*p;
1028
1029	prog = lafe_getprogname();
1030
1031	fflush(stderr);
1032
1033	p = (strcmp(prog,"bsdtar") != 0) ? "(bsdtar)" : "";
1034	printf("%s%s: manipulate archive files\n", prog, p);
1035
1036	for (p = long_help_msg; *p != '\0'; p++) {
1037		if (*p == '%') {
1038			if (p[1] == 'p') {
1039				fputs(prog, stdout);
1040				p++;
1041			} else
1042				putchar('%');
1043		} else
1044			putchar(*p);
1045	}
1046	version();
1047}
1048