serial.h revision 98944
1/* Remote serial support interface definitions for GDB, the GNU Debugger. 2 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000 3 Free Software Foundation, Inc. 4 5 This file is part of GDB. 6 7 This program is free software; you can redistribute it and/or modify 8 it under the terms of the GNU General Public License as published by 9 the Free Software Foundation; either version 2 of the License, or 10 (at your option) any later version. 11 12 This program is distributed in the hope that it will be useful, 13 but WITHOUT ANY WARRANTY; without even the implied warranty of 14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this program; if not, write to the Free Software 19 Foundation, Inc., 59 Temple Place - Suite 330, 20 Boston, MA 02111-1307, USA. */ 21 22#ifndef SERIAL_H 23#define SERIAL_H 24 25/* For most routines, if a failure is indicated, then errno should be 26 examined. */ 27 28/* Terminal state pointer. This is specific to each type of 29 interface. */ 30 31typedef void *serial_ttystate; 32struct serial; 33 34/* Try to open NAME. Returns a new `struct serial *' on success, NULL 35 on failure. Note that some open calls can block and, if possible, 36 should be written to be non-blocking, with calls to ui_look_hook 37 so they can be cancelled. An async interface for open could be 38 added to GDB if necessary. */ 39 40extern struct serial *serial_open (const char *name); 41 42/* Open a new serial stream using a file handle. */ 43 44extern struct serial *serial_fdopen (const int fd); 45 46/* Push out all buffers, close the device and destroy SCB. */ 47 48extern void serial_close (struct serial *scb); 49 50/* Push out all buffers and destroy SCB without closing the device. */ 51 52extern void serial_un_fdopen (struct serial *scb); 53 54/* Read one char from the serial device with TIMEOUT seconds to wait 55 or -1 to wait forever. Use timeout of 0 to effect a poll. 56 Infinite waits are not permitted. Returns unsigned char if ok, else 57 one of the following codes. Note that all error return-codes are 58 guaranteed to be < 0. */ 59 60enum serial_rc { 61 SERIAL_ERROR = -1, /* General error. */ 62 SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read. 63 Unfortunately, through ui_loop_hook(), this 64 can also be a QUIT indication. */ 65 SERIAL_EOF = -3 /* General end-of-file or remote target 66 connection closed, indication. Includes 67 things like the line dropping dead. */ 68}; 69 70extern int serial_readchar (struct serial *scb, int timeout); 71 72/* Write LEN chars from STRING to the port SCB. Returns 0 for 73 success, non-zero for failure. */ 74 75extern int serial_write (struct serial *scb, const char *str, int len); 76 77/* Write a printf style string onto the serial port. */ 78 79extern void serial_printf (struct serial *desc, const char *,...) ATTR_FORMAT (printf, 2, 3); 80 81/* Allow pending output to drain. */ 82 83extern int serial_drain_output (struct serial *); 84 85/* Flush (discard) pending output. Might also flush input (if this 86 system can't flush only output). */ 87 88extern int serial_flush_output (struct serial *); 89 90/* Flush pending input. Might also flush output (if this system can't 91 flush only input). */ 92 93extern int serial_flush_input (struct serial *); 94 95/* Send a break between 0.25 and 0.5 seconds long. */ 96 97extern int serial_send_break (struct serial *scb); 98 99/* Turn the port into raw mode. */ 100 101extern void serial_raw (struct serial *scb); 102 103/* Return a pointer to a newly malloc'd ttystate containing the state 104 of the tty. */ 105 106extern serial_ttystate serial_get_tty_state (struct serial *scb); 107 108/* Set the state of the tty to TTYSTATE. The change is immediate. 109 When changing to or from raw mode, input might be discarded. 110 Returns 0 for success, negative value for error (in which case 111 errno contains the error). */ 112 113extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate); 114 115/* printf_filtered a user-comprehensible description of ttystate on 116 the specified STREAM. FIXME: At present this sends output to the 117 default stream - GDB_STDOUT. */ 118 119extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *); 120 121/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the 122 current state (generally obtained from a recent call to 123 serial_get_tty_state()), but be careful not to discard any input. 124 This means that we never switch in or out of raw mode, even if 125 NEW_TTYSTATE specifies a switch. */ 126 127extern int serial_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate); 128 129/* Set the baudrate to the decimal value supplied. Returns 0 for 130 success, -1 for failure. */ 131 132extern int serial_setbaudrate (struct serial *scb, int rate); 133 134/* Set the number of stop bits to the value specified. Returns 0 for 135 success, -1 for failure. */ 136 137#define SERIAL_1_STOPBITS 1 138#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */ 139#define SERIAL_2_STOPBITS 3 140 141extern int serial_setstopbits (struct serial *scb, int num); 142 143/* Asynchronous serial interface: */ 144 145/* Can the serial device support asynchronous mode? */ 146 147extern int serial_can_async_p (struct serial *scb); 148 149/* Has the serial device been put in asynchronous mode? */ 150 151extern int serial_is_async_p (struct serial *scb); 152 153/* For ASYNC enabled devices, register a callback and enable 154 asynchronous mode. To disable asynchronous mode, register a NULL 155 callback. */ 156 157typedef void (serial_event_ftype) (struct serial *scb, void *context); 158extern void serial_async (struct serial *scb, serial_event_ftype *handler, void *context); 159 160/* Provide direct access to the underlying FD (if any) used to 161 implement the serial device. This interface is clearly 162 deprecated. Will call internal_error() if the operation isn't 163 applicable to the current serial device. */ 164 165extern int deprecated_serial_fd (struct serial *scb); 166 167/* Trace/debug mechanism. 168 169 serial_debug() enables/disables internal debugging. 170 serial_debug_p() indicates the current debug state. */ 171 172extern void serial_debug (struct serial *scb, int debug_p); 173 174extern int serial_debug_p (struct serial *scb); 175 176 177/* Details of an instance of a serial object */ 178 179struct serial 180 { 181 int fd; /* File descriptor */ 182 struct serial_ops *ops; /* Function vector */ 183 void *state; /* Local context info for open FD */ 184 serial_ttystate ttystate; /* Not used (yet) */ 185 int bufcnt; /* Amount of data remaining in receive 186 buffer. -ve for sticky errors. */ 187 unsigned char *bufp; /* Current byte */ 188 unsigned char buf[BUFSIZ]; /* Da buffer itself */ 189 int current_timeout; /* (ser-unix.c termio{,s} only), last 190 value of VTIME */ 191 int timeout_remaining; /* (ser-unix.c termio{,s} only), we 192 still need to wait for this many 193 more seconds. */ 194 char *name; /* The name of the device or host */ 195 struct serial *next; /* Pointer to the next `struct serial *' */ 196 int refcnt; /* Number of pointers to this block */ 197 int debug_p; /* Trace this serial devices operation. */ 198 int async_state; /* Async internal state. */ 199 void *async_context; /* Async event thread's context */ 200 serial_event_ftype *async_handler;/* Async event handler */ 201 }; 202 203struct serial_ops 204 { 205 char *name; 206 struct serial_ops *next; 207 int (*open) (struct serial *, const char *name); 208 void (*close) (struct serial *); 209 int (*readchar) (struct serial *, int timeout); 210 int (*write) (struct serial *, const char *str, int len); 211 /* Discard pending output */ 212 int (*flush_output) (struct serial *); 213 /* Discard pending input */ 214 int (*flush_input) (struct serial *); 215 int (*send_break) (struct serial *); 216 void (*go_raw) (struct serial *); 217 serial_ttystate (*get_tty_state) (struct serial *); 218 int (*set_tty_state) (struct serial *, serial_ttystate); 219 void (*print_tty_state) (struct serial *, serial_ttystate, 220 struct ui_file *); 221 int (*noflush_set_tty_state) (struct serial *, serial_ttystate, 222 serial_ttystate); 223 int (*setbaudrate) (struct serial *, int rate); 224 int (*setstopbits) (struct serial *, int num); 225 /* Wait for output to drain */ 226 int (*drain_output) (struct serial *); 227 /* Change the serial device into/out of asynchronous mode, call 228 the specified function when ever there is something 229 interesting. */ 230 void (*async) (struct serial *scb, int async_p); 231 }; 232 233/* Add a new serial interface to the interface list */ 234 235extern void serial_add_interface (struct serial_ops * optable); 236 237/* File in which to record the remote debugging session */ 238 239extern void serial_log_command (const char *); 240 241#endif /* SERIAL_H */ 242