pcrtc.c revision 65566
1/*- 2 * Copyright (c) 1990 The Regents of the University of California. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to Berkeley by 6 * William Jolitz and Don Ahn. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by the University of 19 * California, Berkeley and its contributors. 20 * 4. Neither the name of the University nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * from: @(#)clock.c 7.2 (Berkeley) 5/12/91 37 * $FreeBSD: head/sys/pc98/cbus/pcrtc.c 65566 2000-09-07 13:32:59Z kato $ 38 */ 39 40/* 41 * Routines to handle clock hardware. 42 */ 43 44/* 45 * inittodr, settodr and support routines written 46 * by Christoph Robitschko <chmr@edvz.tu-graz.ac.at> 47 * 48 * reintroduced and updated by Chris Stenton <chris@gnome.co.uk> 8/10/94 49 */ 50 51/* 52 * modified for PC98 by Kakefuda 53 */ 54 55#include "opt_clock.h" 56#include "apm.h" 57 58#include <sys/param.h> 59#include <sys/systm.h> 60#include <sys/bus.h> 61#include <sys/proc.h> 62#include <sys/time.h> 63#include <sys/timetc.h> 64#include <sys/kernel.h> 65#ifndef SMP 66#include <sys/lock.h> 67#endif 68#include <sys/sysctl.h> 69#include <sys/cons.h> 70 71#include <machine/clock.h> 72#ifdef CLK_CALIBRATION_LOOP 73#endif 74#include <machine/cputypes.h> 75#include <machine/frame.h> 76#include <machine/ipl.h> 77#include <machine/limits.h> 78#include <machine/md_var.h> 79#include <machine/psl.h> 80#ifdef APIC_IO 81#include <machine/segments.h> 82#endif 83#if defined(SMP) || defined(APIC_IO) 84#include <machine/smp.h> 85#endif /* SMP || APIC_IO */ 86#include <machine/specialreg.h> 87 88#include <i386/isa/icu.h> 89#ifdef PC98 90#include <pc98/pc98/pc98.h> 91#include <pc98/pc98/pc98_machdep.h> 92#include <i386/isa/isa_device.h> 93#else 94#include <i386/isa/isa.h> 95#include <isa/rtc.h> 96#endif 97#include <isa/isavar.h> 98#include <i386/isa/timerreg.h> 99 100#include <i386/isa/intr_machdep.h> 101 102#include "mca.h" 103#if NMCA > 0 104#include <i386/isa/mca_machdep.h> 105#endif 106 107#ifdef APIC_IO 108#include <i386/isa/intr_machdep.h> 109/* The interrupt triggered by the 8254 (timer) chip */ 110int apic_8254_intr; 111static u_long read_intr_count __P((int vec)); 112static void setup_8254_mixed_mode __P((void)); 113#endif 114 115/* 116 * 32-bit time_t's can't reach leap years before 1904 or after 2036, so we 117 * can use a simple formula for leap years. 118 */ 119#define LEAPYEAR(y) ((u_int)(y) % 4 == 0) 120#define DAYSPERYEAR (31+28+31+30+31+30+31+31+30+31+30+31) 121 122#define TIMER_DIV(x) ((timer_freq + (x) / 2) / (x)) 123 124/* 125 * Time in timer cycles that it takes for microtime() to disable interrupts 126 * and latch the count. microtime() currently uses "cli; outb ..." so it 127 * normally takes less than 2 timer cycles. Add a few for cache misses. 128 * Add a few more to allow for latency in bogus calls to microtime() with 129 * interrupts already disabled. 130 */ 131#define TIMER0_LATCH_COUNT 20 132 133/* 134 * Maximum frequency that we are willing to allow for timer0. Must be 135 * low enough to guarantee that the timer interrupt handler returns 136 * before the next timer interrupt. 137 */ 138#define TIMER0_MAX_FREQ 20000 139 140int adjkerntz; /* local offset from GMT in seconds */ 141int clkintr_pending; 142int disable_rtc_set; /* disable resettodr() if != 0 */ 143volatile u_int idelayed; 144int statclock_disable; 145u_int stat_imask = SWI_LOW_MASK; 146#ifndef TIMER_FREQ 147#ifdef PC98 148#define TIMER_FREQ 2457600; 149#else /* IBM-PC */ 150#define TIMER_FREQ 1193182; 151#endif /* PC98 */ 152#endif 153u_int timer_freq = TIMER_FREQ; 154int timer0_max_count; 155u_int tsc_freq; 156int tsc_is_broken; 157int wall_cmos_clock; /* wall CMOS clock assumed if != 0 */ 158 159static int beeping = 0; 160#if 0 161static u_int clk_imask = HWI_MASK | SWI_MASK; 162#endif 163static const u_char daysinmonth[] = {31,28,31,30,31,30,31,31,30,31,30,31}; 164static u_int hardclock_max_count; 165static u_int32_t i8254_lastcount; 166static u_int32_t i8254_offset; 167static int i8254_ticked; 168/* 169 * XXX new_function and timer_func should not handle clockframes, but 170 * timer_func currently needs to hold hardclock to handle the 171 * timer0_state == 0 case. We should use inthand_add()/inthand_remove() 172 * to switch between clkintr() and a slightly different timerintr(). 173 */ 174static void (*new_function) __P((struct clockframe *frame)); 175static u_int new_rate; 176#ifndef PC98 177static u_char rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF; 178static u_char rtc_statusb = RTCSB_24HR | RTCSB_PINTR; 179#endif 180static u_int timer0_prescaler_count; 181 182/* Values for timerX_state: */ 183#define RELEASED 0 184#define RELEASE_PENDING 1 185#define ACQUIRED 2 186#define ACQUIRE_PENDING 3 187 188static u_char timer0_state; 189#ifdef PC98 190static u_char timer1_state; 191#endif 192static u_char timer2_state; 193static void (*timer_func) __P((struct clockframe *frame)) = hardclock; 194#ifdef PC98 195static void rtc_serialcombit __P((int)); 196static void rtc_serialcom __P((int)); 197static int rtc_inb __P((void)); 198static void rtc_outb __P((int)); 199#endif 200static u_int tsc_present; 201 202static unsigned i8254_get_timecount __P((struct timecounter *tc)); 203static unsigned tsc_get_timecount __P((struct timecounter *tc)); 204static void set_timer_freq(u_int freq, int intr_freq); 205 206static struct timecounter tsc_timecounter = { 207 tsc_get_timecount, /* get_timecount */ 208 0, /* no poll_pps */ 209 ~0u, /* counter_mask */ 210 0, /* frequency */ 211 "TSC" /* name */ 212}; 213 214SYSCTL_OPAQUE(_debug, OID_AUTO, tsc_timecounter, CTLFLAG_RD, 215 &tsc_timecounter, sizeof(tsc_timecounter), "S,timecounter", ""); 216 217static struct timecounter i8254_timecounter = { 218 i8254_get_timecount, /* get_timecount */ 219 0, /* no poll_pps */ 220 ~0u, /* counter_mask */ 221 0, /* frequency */ 222 "i8254" /* name */ 223}; 224 225SYSCTL_OPAQUE(_debug, OID_AUTO, i8254_timecounter, CTLFLAG_RD, 226 &i8254_timecounter, sizeof(i8254_timecounter), "S,timecounter", ""); 227 228static void 229clkintr(struct clockframe frame) 230{ 231 int intrsave; 232 233 if (timecounter->tc_get_timecount == i8254_get_timecount) { 234 intrsave = save_intr(); 235 disable_intr(); 236 CLOCK_LOCK(); 237 if (i8254_ticked) 238 i8254_ticked = 0; 239 else { 240 i8254_offset += timer0_max_count; 241 i8254_lastcount = 0; 242 } 243 clkintr_pending = 0; 244 CLOCK_UNLOCK(); 245 restore_intr(intrsave); 246 } 247 timer_func(&frame); 248 switch (timer0_state) { 249 250 case RELEASED: 251 setdelayed(); 252 break; 253 254 case ACQUIRED: 255 if ((timer0_prescaler_count += timer0_max_count) 256 >= hardclock_max_count) { 257 timer0_prescaler_count -= hardclock_max_count; 258 hardclock(&frame); 259 setdelayed(); 260 } 261 break; 262 263 case ACQUIRE_PENDING: 264 intrsave = save_intr(); 265 disable_intr(); 266 CLOCK_LOCK(); 267 i8254_offset = i8254_get_timecount(NULL); 268 i8254_lastcount = 0; 269 timer0_max_count = TIMER_DIV(new_rate); 270 outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); 271 outb(TIMER_CNTR0, timer0_max_count & 0xff); 272 outb(TIMER_CNTR0, timer0_max_count >> 8); 273 CLOCK_UNLOCK(); 274 restore_intr(intrsave); 275 timer_func = new_function; 276 timer0_state = ACQUIRED; 277 setdelayed(); 278 break; 279 280 case RELEASE_PENDING: 281 if ((timer0_prescaler_count += timer0_max_count) 282 >= hardclock_max_count) { 283 intrsave = save_intr(); 284 disable_intr(); 285 CLOCK_LOCK(); 286 i8254_offset = i8254_get_timecount(NULL); 287 i8254_lastcount = 0; 288 timer0_max_count = hardclock_max_count; 289 outb(TIMER_MODE, 290 TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); 291 outb(TIMER_CNTR0, timer0_max_count & 0xff); 292 outb(TIMER_CNTR0, timer0_max_count >> 8); 293 CLOCK_UNLOCK(); 294 restore_intr(intrsave); 295 timer0_prescaler_count = 0; 296 timer_func = hardclock; 297 timer0_state = RELEASED; 298 hardclock(&frame); 299 setdelayed(); 300 } 301 break; 302 } 303#if NMCA > 0 304 /* Reset clock interrupt by asserting bit 7 of port 0x61 */ 305 if (MCA_system) 306 outb(0x61, inb(0x61) | 0x80); 307#endif 308} 309 310/* 311 * The acquire and release functions must be called at ipl >= splclock(). 312 */ 313int 314acquire_timer0(int rate, void (*function) __P((struct clockframe *frame))) 315{ 316 static int old_rate; 317 318 if (rate <= 0 || rate > TIMER0_MAX_FREQ) 319 return (-1); 320 switch (timer0_state) { 321 322 case RELEASED: 323 timer0_state = ACQUIRE_PENDING; 324 break; 325 326 case RELEASE_PENDING: 327 if (rate != old_rate) 328 return (-1); 329 /* 330 * The timer has been released recently, but is being 331 * re-acquired before the release completed. In this 332 * case, we simply reclaim it as if it had not been 333 * released at all. 334 */ 335 timer0_state = ACQUIRED; 336 break; 337 338 default: 339 return (-1); /* busy */ 340 } 341 new_function = function; 342 old_rate = new_rate = rate; 343 return (0); 344} 345 346#ifdef PC98 347int 348acquire_timer1(int mode) 349{ 350 351 if (timer1_state != RELEASED) 352 return (-1); 353 timer1_state = ACQUIRED; 354 355 /* 356 * This access to the timer registers is as atomic as possible 357 * because it is a single instruction. We could do better if we 358 * knew the rate. Use of splclock() limits glitches to 10-100us, 359 * and this is probably good enough for timer2, so we aren't as 360 * careful with it as with timer0. 361 */ 362 outb(TIMER_MODE, TIMER_SEL1 | (mode & 0x3f)); 363 364 return (0); 365} 366#endif 367 368int 369acquire_timer2(int mode) 370{ 371 372 if (timer2_state != RELEASED) 373 return (-1); 374 timer2_state = ACQUIRED; 375 376 /* 377 * This access to the timer registers is as atomic as possible 378 * because it is a single instruction. We could do better if we 379 * knew the rate. Use of splclock() limits glitches to 10-100us, 380 * and this is probably good enough for timer2, so we aren't as 381 * careful with it as with timer0. 382 */ 383 outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f)); 384 385 return (0); 386} 387 388int 389release_timer0() 390{ 391 switch (timer0_state) { 392 393 case ACQUIRED: 394 timer0_state = RELEASE_PENDING; 395 break; 396 397 case ACQUIRE_PENDING: 398 /* Nothing happened yet, release quickly. */ 399 timer0_state = RELEASED; 400 break; 401 402 default: 403 return (-1); 404 } 405 return (0); 406} 407 408#ifdef PC98 409int 410release_timer1() 411{ 412 413 if (timer1_state != ACQUIRED) 414 return (-1); 415 timer1_state = RELEASED; 416 outb(TIMER_MODE, TIMER_SEL1 | TIMER_SQWAVE | TIMER_16BIT); 417 return (0); 418} 419#endif 420 421int 422release_timer2() 423{ 424 425 if (timer2_state != ACQUIRED) 426 return (-1); 427 timer2_state = RELEASED; 428 outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT); 429 return (0); 430} 431 432#ifndef PC98 433/* 434 * This routine receives statistical clock interrupts from the RTC. 435 * As explained above, these occur at 128 interrupts per second. 436 * When profiling, we receive interrupts at a rate of 1024 Hz. 437 * 438 * This does not actually add as much overhead as it sounds, because 439 * when the statistical clock is active, the hardclock driver no longer 440 * needs to keep (inaccurate) statistics on its own. This decouples 441 * statistics gathering from scheduling interrupts. 442 * 443 * The RTC chip requires that we read status register C (RTC_INTR) 444 * to acknowledge an interrupt, before it will generate the next one. 445 * Under high interrupt load, rtcintr() can be indefinitely delayed and 446 * the clock can tick immediately after the read from RTC_INTR. In this 447 * case, the mc146818A interrupt signal will not drop for long enough 448 * to register with the 8259 PIC. If an interrupt is missed, the stat 449 * clock will halt, considerably degrading system performance. This is 450 * why we use 'while' rather than a more straightforward 'if' below. 451 * Stat clock ticks can still be lost, causing minor loss of accuracy 452 * in the statistics, but the stat clock will no longer stop. 453 */ 454static void 455rtcintr(struct clockframe frame) 456{ 457 while (rtcin(RTC_INTR) & RTCIR_PERIOD) 458 statclock(&frame); 459} 460 461#include "opt_ddb.h" 462#ifdef DDB 463#include <ddb/ddb.h> 464 465DB_SHOW_COMMAND(rtc, rtc) 466{ 467 printf("%02x/%02x/%02x %02x:%02x:%02x, A = %02x, B = %02x, C = %02x\n", 468 rtcin(RTC_YEAR), rtcin(RTC_MONTH), rtcin(RTC_DAY), 469 rtcin(RTC_HRS), rtcin(RTC_MIN), rtcin(RTC_SEC), 470 rtcin(RTC_STATUSA), rtcin(RTC_STATUSB), rtcin(RTC_INTR)); 471} 472#endif /* DDB */ 473#endif /* for PC98 */ 474 475static int 476getit(void) 477{ 478 int high, low, intrsave; 479 480 intrsave = save_intr(); 481 disable_intr(); 482 CLOCK_LOCK(); 483 484 /* Select timer0 and latch counter value. */ 485 outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); 486 487 low = inb(TIMER_CNTR0); 488 high = inb(TIMER_CNTR0); 489 490 CLOCK_UNLOCK(); 491 restore_intr(intrsave); 492 return ((high << 8) | low); 493} 494 495/* 496 * Wait "n" microseconds. 497 * Relies on timer 1 counting down from (timer_freq / hz) 498 * Note: timer had better have been programmed before this is first used! 499 */ 500void 501DELAY(int n) 502{ 503 int delta, prev_tick, tick, ticks_left; 504 505#ifdef DELAYDEBUG 506 int getit_calls = 1; 507 int n1; 508 static int state = 0; 509 510 if (state == 0) { 511 state = 1; 512 for (n1 = 1; n1 <= 10000000; n1 *= 10) 513 DELAY(n1); 514 state = 2; 515 } 516 if (state == 1) 517 printf("DELAY(%d)...", n); 518#endif 519 /* 520 * Guard against the timer being uninitialized if we are called 521 * early for console i/o. 522 */ 523 if (timer0_max_count == 0) 524 set_timer_freq(timer_freq, hz); 525 526 /* 527 * Read the counter first, so that the rest of the setup overhead is 528 * counted. Guess the initial overhead is 20 usec (on most systems it 529 * takes about 1.5 usec for each of the i/o's in getit(). The loop 530 * takes about 6 usec on a 486/33 and 13 usec on a 386/20. The 531 * multiplications and divisions to scale the count take a while). 532 */ 533 prev_tick = getit(); 534 n -= 0; /* XXX actually guess no initial overhead */ 535 /* 536 * Calculate (n * (timer_freq / 1e6)) without using floating point 537 * and without any avoidable overflows. 538 */ 539 if (n <= 0) 540 ticks_left = 0; 541 else if (n < 256) 542 /* 543 * Use fixed point to avoid a slow division by 1000000. 544 * 39099 = 1193182 * 2^15 / 10^6 rounded to nearest. 545 * 2^15 is the first power of 2 that gives exact results 546 * for n between 0 and 256. 547 */ 548 ticks_left = ((u_int)n * 39099 + (1 << 15) - 1) >> 15; 549 else 550 /* 551 * Don't bother using fixed point, although gcc-2.7.2 552 * generates particularly poor code for the long long 553 * division, since even the slow way will complete long 554 * before the delay is up (unless we're interrupted). 555 */ 556 ticks_left = ((u_int)n * (long long)timer_freq + 999999) 557 / 1000000; 558 559 while (ticks_left > 0) { 560 tick = getit(); 561#ifdef DELAYDEBUG 562 ++getit_calls; 563#endif 564 delta = prev_tick - tick; 565 prev_tick = tick; 566 if (delta < 0) { 567 delta += timer0_max_count; 568 /* 569 * Guard against timer0_max_count being wrong. 570 * This shouldn't happen in normal operation, 571 * but it may happen if set_timer_freq() is 572 * traced. 573 */ 574 if (delta < 0) 575 delta = 0; 576 } 577 ticks_left -= delta; 578 } 579#ifdef DELAYDEBUG 580 if (state == 1) 581 printf(" %d calls to getit() at %d usec each\n", 582 getit_calls, (n + 5) / getit_calls); 583#endif 584} 585 586static void 587sysbeepstop(void *chan) 588{ 589#ifdef PC98 /* PC98 */ 590 outb(IO_PPI, inb(IO_PPI)|0x08); /* disable counter1 output to speaker */ 591 release_timer1(); 592#else 593 outb(IO_PPI, inb(IO_PPI)&0xFC); /* disable counter2 output to speaker */ 594 release_timer2(); 595#endif 596 beeping = 0; 597} 598 599int 600sysbeep(int pitch, int period) 601{ 602 int intrsave; 603 int x = splclock(); 604 605#ifdef PC98 606 if (acquire_timer1(TIMER_SQWAVE|TIMER_16BIT)) 607 if (!beeping) { 608 /* Something else owns it. */ 609 splx(x); 610 return (-1); /* XXX Should be EBUSY, but nobody cares anyway. */ 611 } 612 disable_intr(); 613 outb(0x3fdb, pitch); 614 outb(0x3fdb, (pitch>>8)); 615 enable_intr(); 616 if (!beeping) { 617 /* enable counter1 output to speaker */ 618 outb(IO_PPI, (inb(IO_PPI) & 0xf7)); 619 beeping = period; 620 timeout(sysbeepstop, (void *)NULL, period); 621 } 622#else 623 if (acquire_timer2(TIMER_SQWAVE|TIMER_16BIT)) 624 if (!beeping) { 625 /* Something else owns it. */ 626 splx(x); 627 return (-1); /* XXX Should be EBUSY, but nobody cares anyway. */ 628 } 629 intrsave = save_intr(); 630 disable_intr(); 631 CLOCK_LOCK(); 632 outb(TIMER_CNTR2, pitch); 633 outb(TIMER_CNTR2, (pitch>>8)); 634 CLOCK_UNLOCK(); 635 restore_intr(intrsave); 636 if (!beeping) { 637 /* enable counter2 output to speaker */ 638 outb(IO_PPI, inb(IO_PPI) | 3); 639 beeping = period; 640 timeout(sysbeepstop, (void *)NULL, period); 641 } 642#endif 643 splx(x); 644 return (0); 645} 646 647#ifndef PC98 648/* 649 * RTC support routines 650 */ 651 652int 653rtcin(reg) 654 int reg; 655{ 656 int s; 657 u_char val; 658 659 s = splhigh(); 660 outb(IO_RTC, reg); 661 inb(0x84); 662 val = inb(IO_RTC + 1); 663 inb(0x84); 664 splx(s); 665 return (val); 666} 667 668static __inline void 669writertc(u_char reg, u_char val) 670{ 671 int s; 672 673 s = splhigh(); 674 inb(0x84); 675 outb(IO_RTC, reg); 676 inb(0x84); 677 outb(IO_RTC + 1, val); 678 inb(0x84); /* XXX work around wrong order in rtcin() */ 679 splx(s); 680} 681 682static __inline int 683readrtc(int port) 684{ 685 return(bcd2bin(rtcin(port))); 686} 687#endif 688 689#ifdef PC98 690unsigned int delaycount; 691#define FIRST_GUESS 0x2000 692static void findcpuspeed(void) 693{ 694 int i; 695 int remainder; 696 697 /* Put counter in count down mode */ 698 outb(TIMER_MODE, TIMER_SEL0 | TIMER_16BIT | TIMER_RATEGEN); 699 outb(TIMER_CNTR0, 0xff); 700 outb(TIMER_CNTR0, 0xff); 701 for (i = FIRST_GUESS; i; i--) 702 ; 703 remainder = getit(); 704 delaycount = (FIRST_GUESS * TIMER_DIV(1000)) / (0xffff - remainder); 705} 706#endif 707 708#ifdef PC98 709static u_int 710calibrate_clocks(void) 711{ 712 int timeout; 713 u_int count, prev_count, tot_count; 714 u_short sec, start_sec; 715 716 if (bootverbose) 717 printf("Calibrating clock(s) ... "); 718 /* Check ARTIC. */ 719 if (!(PC98_SYSTEM_PARAMETER(0x458) & 0x80) && 720 !(PC98_SYSTEM_PARAMETER(0x45b) & 0x04)) 721 goto fail; 722 timeout = 100000000; 723 724 /* Read the ARTIC. */ 725 sec = inw(0x5e); 726 727 /* Wait for the ARTIC to changes. */ 728 start_sec = sec; 729 for (;;) { 730 sec = inw(0x5e); 731 if (sec != start_sec) 732 break; 733 if (--timeout == 0) 734 goto fail; 735 } 736 prev_count = getit(); 737 if (prev_count == 0 || prev_count > timer0_max_count) 738 goto fail; 739 tot_count = 0; 740 741 if (tsc_present) 742 wrmsr(0x10, 0LL); /* XXX 0x10 is the MSR for the TSC */ 743 start_sec = sec; 744 for (;;) { 745 sec = inw(0x5e); 746 count = getit(); 747 if (count == 0 || count > timer0_max_count) 748 goto fail; 749 if (count > prev_count) 750 tot_count += prev_count - (count - timer0_max_count); 751 else 752 tot_count += prev_count - count; 753 prev_count = count; 754 if ((sec == start_sec + 1200) || 755 (sec < start_sec && 756 (u_int)sec + 0x10000 == (u_int)start_sec + 1200)) 757 break; 758 if (--timeout == 0) 759 goto fail; 760 } 761 /* 762 * Read the cpu cycle counter. The timing considerations are 763 * similar to those for the i8254 clock. 764 */ 765 if (tsc_present) 766 tsc_freq = rdtsc(); 767 768 if (bootverbose) { 769 if (tsc_present) 770 printf("TSC clock: %u Hz, ", tsc_freq); 771 printf("i8254 clock: %u Hz\n", tot_count); 772 } 773 return (tot_count); 774 775fail: 776 if (bootverbose) 777 printf("failed, using default i8254 clock of %u Hz\n", 778 timer_freq); 779 return (timer_freq); 780} 781#else 782static u_int 783calibrate_clocks(void) 784{ 785 u_int64_t old_tsc; 786 u_int count, prev_count, tot_count; 787 int sec, start_sec, timeout; 788 789 if (bootverbose) 790 printf("Calibrating clock(s) ... "); 791 if (!(rtcin(RTC_STATUSD) & RTCSD_PWR)) 792 goto fail; 793 timeout = 100000000; 794 795 /* Read the mc146818A seconds counter. */ 796 for (;;) { 797 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) { 798 sec = rtcin(RTC_SEC); 799 break; 800 } 801 if (--timeout == 0) 802 goto fail; 803 } 804 805 /* Wait for the mC146818A seconds counter to change. */ 806 start_sec = sec; 807 for (;;) { 808 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) { 809 sec = rtcin(RTC_SEC); 810 if (sec != start_sec) 811 break; 812 } 813 if (--timeout == 0) 814 goto fail; 815 } 816 817 /* Start keeping track of the i8254 counter. */ 818 prev_count = getit(); 819 if (prev_count == 0 || prev_count > timer0_max_count) 820 goto fail; 821 tot_count = 0; 822 823 if (tsc_present) 824 old_tsc = rdtsc(); 825 else 826 old_tsc = 0; /* shut up gcc */ 827 828 /* 829 * Wait for the mc146818A seconds counter to change. Read the i8254 830 * counter for each iteration since this is convenient and only 831 * costs a few usec of inaccuracy. The timing of the final reads 832 * of the counters almost matches the timing of the initial reads, 833 * so the main cause of inaccuracy is the varying latency from 834 * inside getit() or rtcin(RTC_STATUSA) to the beginning of the 835 * rtcin(RTC_SEC) that returns a changed seconds count. The 836 * maximum inaccuracy from this cause is < 10 usec on 486's. 837 */ 838 start_sec = sec; 839 for (;;) { 840 if (!(rtcin(RTC_STATUSA) & RTCSA_TUP)) 841 sec = rtcin(RTC_SEC); 842 count = getit(); 843 if (count == 0 || count > timer0_max_count) 844 goto fail; 845 if (count > prev_count) 846 tot_count += prev_count - (count - timer0_max_count); 847 else 848 tot_count += prev_count - count; 849 prev_count = count; 850 if (sec != start_sec) 851 break; 852 if (--timeout == 0) 853 goto fail; 854 } 855 856 /* 857 * Read the cpu cycle counter. The timing considerations are 858 * similar to those for the i8254 clock. 859 */ 860 if (tsc_present) 861 tsc_freq = rdtsc() - old_tsc; 862 863 if (bootverbose) { 864 if (tsc_present) 865 printf("TSC clock: %u Hz, ", tsc_freq); 866 printf("i8254 clock: %u Hz\n", tot_count); 867 } 868 return (tot_count); 869 870fail: 871 if (bootverbose) 872 printf("failed, using default i8254 clock of %u Hz\n", 873 timer_freq); 874 return (timer_freq); 875} 876#endif /* !PC98 */ 877 878static void 879set_timer_freq(u_int freq, int intr_freq) 880{ 881 int intrsave; 882 int new_timer0_max_count; 883 884 intrsave = save_intr(); 885 disable_intr(); 886 CLOCK_LOCK(); 887 timer_freq = freq; 888 new_timer0_max_count = hardclock_max_count = TIMER_DIV(intr_freq); 889 if (new_timer0_max_count != timer0_max_count) { 890 timer0_max_count = new_timer0_max_count; 891 outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); 892 outb(TIMER_CNTR0, timer0_max_count & 0xff); 893 outb(TIMER_CNTR0, timer0_max_count >> 8); 894 } 895 CLOCK_UNLOCK(); 896 restore_intr(intrsave); 897} 898 899/* 900 * i8254_restore is called from apm_default_resume() to reload 901 * the countdown register. 902 * this should not be necessary but there are broken laptops that 903 * do not restore the countdown register on resume. 904 * when it happnes, it messes up the hardclock interval and system clock, 905 * which leads to the infamous "calcru: negative time" problem. 906 */ 907void 908i8254_restore(void) 909{ 910 int intrsave; 911 912 intrsave = save_intr(); 913 disable_intr(); 914 CLOCK_LOCK(); 915 outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); 916 outb(TIMER_CNTR0, timer0_max_count & 0xff); 917 outb(TIMER_CNTR0, timer0_max_count >> 8); 918 CLOCK_UNLOCK(); 919 restore_intr(intrsave); 920} 921 922/* 923 * Initialize 8254 timer 0 early so that it can be used in DELAY(). 924 * XXX initialization of other timers is unintentionally left blank. 925 */ 926void 927startrtclock() 928{ 929 u_int delta, freq; 930 931#ifdef PC98 932 findcpuspeed(); 933 if (pc98_machine_type & M_8M) 934 timer_freq = 1996800L; /* 1.9968 MHz */ 935 else 936 timer_freq = 2457600L; /* 2.4576 MHz */ 937#endif /* PC98 */ 938 939 if (cpu_feature & CPUID_TSC) 940 tsc_present = 1; 941 else 942 tsc_present = 0; 943 944#ifndef PC98 945 writertc(RTC_STATUSA, rtc_statusa); 946 writertc(RTC_STATUSB, RTCSB_24HR); 947#endif 948 949 set_timer_freq(timer_freq, hz); 950 freq = calibrate_clocks(); 951#ifdef CLK_CALIBRATION_LOOP 952 if (bootverbose) { 953 printf( 954 "Press a key on the console to abort clock calibration\n"); 955 while (cncheckc() == -1) 956 calibrate_clocks(); 957 } 958#endif 959 960 /* 961 * Use the calibrated i8254 frequency if it seems reasonable. 962 * Otherwise use the default, and don't use the calibrated i586 963 * frequency. 964 */ 965 delta = freq > timer_freq ? freq - timer_freq : timer_freq - freq; 966 if (delta < timer_freq / 100) { 967#ifndef CLK_USE_I8254_CALIBRATION 968 if (bootverbose) 969 printf( 970"CLK_USE_I8254_CALIBRATION not specified - using default frequency\n"); 971 freq = timer_freq; 972#endif 973 timer_freq = freq; 974 } else { 975 if (bootverbose) 976 printf( 977 "%d Hz differs from default of %d Hz by more than 1%%\n", 978 freq, timer_freq); 979 tsc_freq = 0; 980 } 981 982 set_timer_freq(timer_freq, hz); 983 i8254_timecounter.tc_frequency = timer_freq; 984 tc_init(&i8254_timecounter); 985 986#ifndef CLK_USE_TSC_CALIBRATION 987 if (tsc_freq != 0) { 988 if (bootverbose) 989 printf( 990"CLK_USE_TSC_CALIBRATION not specified - using old calibration method\n"); 991 tsc_freq = 0; 992 } 993#endif 994 if (tsc_present && tsc_freq == 0) { 995 /* 996 * Calibration of the i586 clock relative to the mc146818A 997 * clock failed. Do a less accurate calibration relative 998 * to the i8254 clock. 999 */ 1000 u_int64_t old_tsc = rdtsc(); 1001 1002 DELAY(1000000); 1003 tsc_freq = rdtsc() - old_tsc; 1004#ifdef CLK_USE_TSC_CALIBRATION 1005 if (bootverbose) 1006 printf("TSC clock: %u Hz (Method B)\n", tsc_freq); 1007#endif 1008 } 1009 1010#if !defined(SMP) 1011 /* 1012 * We can not use the TSC in SMP mode, until we figure out a 1013 * cheap (impossible), reliable and precise (yeah right!) way 1014 * to synchronize the TSCs of all the CPUs. 1015 * Curse Intel for leaving the counter out of the I/O APIC. 1016 */ 1017 1018#if NAPM > 0 1019 /* 1020 * We can not use the TSC if we support APM. Precise timekeeping 1021 * on an APM'ed machine is at best a fools pursuit, since 1022 * any and all of the time spent in various SMM code can't 1023 * be reliably accounted for. Reading the RTC is your only 1024 * source of reliable time info. The i8254 looses too of course 1025 * but we need to have some kind of time... 1026 * We don't know at this point whether APM is going to be used 1027 * or not, nor when it might be activated. Play it safe. 1028 */ 1029 { 1030 int disabled = 0; 1031 resource_int_value("apm", 0, "disabled", &disabled); 1032 if (disabled == 0) 1033 return; 1034 } 1035#endif /* NAPM > 0 */ 1036 1037 if (tsc_present && tsc_freq != 0 && !tsc_is_broken) { 1038 tsc_timecounter.tc_frequency = tsc_freq; 1039 tc_init(&tsc_timecounter); 1040 } 1041 1042#endif /* !defined(SMP) */ 1043} 1044 1045#ifdef PC98 1046static void 1047rtc_serialcombit(int i) 1048{ 1049 outb(IO_RTC, ((i&0x01)<<5)|0x07); 1050 DELAY(1); 1051 outb(IO_RTC, ((i&0x01)<<5)|0x17); 1052 DELAY(1); 1053 outb(IO_RTC, ((i&0x01)<<5)|0x07); 1054 DELAY(1); 1055} 1056 1057static void 1058rtc_serialcom(int i) 1059{ 1060 rtc_serialcombit(i&0x01); 1061 rtc_serialcombit((i&0x02)>>1); 1062 rtc_serialcombit((i&0x04)>>2); 1063 rtc_serialcombit((i&0x08)>>3); 1064 outb(IO_RTC, 0x07); 1065 DELAY(1); 1066 outb(IO_RTC, 0x0f); 1067 DELAY(1); 1068 outb(IO_RTC, 0x07); 1069 DELAY(1); 1070} 1071 1072static void 1073rtc_outb(int val) 1074{ 1075 int s; 1076 int sa = 0; 1077 1078 for (s=0;s<8;s++) { 1079 sa = ((val >> s) & 0x01) ? 0x27 : 0x07; 1080 outb(IO_RTC, sa); /* set DI & CLK 0 */ 1081 DELAY(1); 1082 outb(IO_RTC, sa | 0x10); /* CLK 1 */ 1083 DELAY(1); 1084 } 1085 outb(IO_RTC, sa & 0xef); /* CLK 0 */ 1086} 1087 1088static int 1089rtc_inb(void) 1090{ 1091 int s; 1092 int sa = 0; 1093 1094 for (s=0;s<8;s++) { 1095 sa |= ((inb(0x33) & 0x01) << s); 1096 outb(IO_RTC, 0x17); /* CLK 1 */ 1097 DELAY(1); 1098 outb(IO_RTC, 0x07); /* CLK 0 */ 1099 DELAY(2); 1100 } 1101 return sa; 1102} 1103#endif /* PC-98 */ 1104 1105/* 1106 * Initialize the time of day register, based on the time base which is, e.g. 1107 * from a filesystem. 1108 */ 1109void 1110inittodr(time_t base) 1111{ 1112 unsigned long sec, days; 1113#ifndef PC98 1114 int yd; 1115#endif 1116 int year, month; 1117 int y, m, s; 1118 struct timespec ts; 1119#ifdef PC98 1120 int second, min, hour; 1121#endif 1122 1123 if (base) { 1124 s = splclock(); 1125 ts.tv_sec = base; 1126 ts.tv_nsec = 0; 1127 tc_setclock(&ts); 1128 splx(s); 1129 } 1130 1131#ifdef PC98 1132 rtc_serialcom(0x03); /* Time Read */ 1133 rtc_serialcom(0x01); /* Register shift command. */ 1134 DELAY(20); 1135 1136 second = bcd2bin(rtc_inb() & 0xff); /* sec */ 1137 min = bcd2bin(rtc_inb() & 0xff); /* min */ 1138 hour = bcd2bin(rtc_inb() & 0xff); /* hour */ 1139 days = bcd2bin(rtc_inb() & 0xff) - 1; /* date */ 1140 1141 month = (rtc_inb() >> 4) & 0x0f; /* month */ 1142 for (m = 1; m < month; m++) 1143 days += daysinmonth[m-1]; 1144 year = bcd2bin(rtc_inb() & 0xff) + 1900; /* year */ 1145 /* 2000 year problem */ 1146 if (year < 1995) 1147 year += 100; 1148 if (year < 1970) 1149 goto wrong_time; 1150 for (y = 1970; y < year; y++) 1151 days += DAYSPERYEAR + LEAPYEAR(y); 1152 if ((month > 2) && LEAPYEAR(year)) 1153 days ++; 1154 sec = ((( days * 24 + 1155 hour) * 60 + 1156 min) * 60 + 1157 second); 1158 /* sec now contains the number of seconds, since Jan 1 1970, 1159 in the local time zone */ 1160#else /* IBM-PC */ 1161 /* Look if we have a RTC present and the time is valid */ 1162 if (!(rtcin(RTC_STATUSD) & RTCSD_PWR)) 1163 goto wrong_time; 1164 1165 /* wait for time update to complete */ 1166 /* If RTCSA_TUP is zero, we have at least 244us before next update */ 1167 s = splhigh(); 1168 while (rtcin(RTC_STATUSA) & RTCSA_TUP) { 1169 splx(s); 1170 s = splhigh(); 1171 } 1172 1173 days = 0; 1174#ifdef USE_RTC_CENTURY 1175 year = readrtc(RTC_YEAR) + readrtc(RTC_CENTURY) * 100; 1176#else 1177 year = readrtc(RTC_YEAR) + 1900; 1178 if (year < 1970) 1179 year += 100; 1180#endif 1181 if (year < 1970) { 1182 splx(s); 1183 goto wrong_time; 1184 } 1185 month = readrtc(RTC_MONTH); 1186 for (m = 1; m < month; m++) 1187 days += daysinmonth[m-1]; 1188 if ((month > 2) && LEAPYEAR(year)) 1189 days ++; 1190 days += readrtc(RTC_DAY) - 1; 1191 yd = days; 1192 for (y = 1970; y < year; y++) 1193 days += DAYSPERYEAR + LEAPYEAR(y); 1194 sec = ((( days * 24 + 1195 readrtc(RTC_HRS)) * 60 + 1196 readrtc(RTC_MIN)) * 60 + 1197 readrtc(RTC_SEC)); 1198 /* sec now contains the number of seconds, since Jan 1 1970, 1199 in the local time zone */ 1200#endif 1201 1202 sec += tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0); 1203 1204 y = time_second - sec; 1205 if (y <= -2 || y >= 2) { 1206 /* badly off, adjust it */ 1207 ts.tv_sec = sec; 1208 ts.tv_nsec = 0; 1209 tc_setclock(&ts); 1210 } 1211 splx(s); 1212 return; 1213 1214wrong_time: 1215 printf("Invalid time in real time clock.\n"); 1216 printf("Check and reset the date immediately!\n"); 1217} 1218 1219/* 1220 * Write system time back to RTC 1221 */ 1222void 1223resettodr() 1224{ 1225 unsigned long tm; 1226 int y, m, s; 1227#ifdef PC98 1228 int wd; 1229#endif 1230 1231 if (disable_rtc_set) 1232 return; 1233 1234 s = splclock(); 1235 tm = time_second; 1236 splx(s); 1237 1238#ifdef PC98 1239 rtc_serialcom(0x01); /* Register shift command. */ 1240 1241 /* Calculate local time to put in RTC */ 1242 1243 tm -= tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0); 1244 1245 rtc_outb(bin2bcd(tm%60)); tm /= 60; /* Write back Seconds */ 1246 rtc_outb(bin2bcd(tm%60)); tm /= 60; /* Write back Minutes */ 1247 rtc_outb(bin2bcd(tm%24)); tm /= 24; /* Write back Hours */ 1248 1249 /* We have now the days since 01-01-1970 in tm */ 1250 wd = (tm+4)%7; 1251 for (y = 1970, m = DAYSPERYEAR + LEAPYEAR(y); 1252 tm >= m; 1253 y++, m = DAYSPERYEAR + LEAPYEAR(y)) 1254 tm -= m; 1255 1256 /* Now we have the years in y and the day-of-the-year in tm */ 1257 for (m = 0; ; m++) { 1258 int ml; 1259 1260 ml = daysinmonth[m]; 1261 if (m == 1 && LEAPYEAR(y)) 1262 ml++; 1263 if (tm < ml) 1264 break; 1265 tm -= ml; 1266 } 1267 1268 m++; 1269 rtc_outb(bin2bcd(tm+1)); /* Write back Day */ 1270 rtc_outb((m << 4) | wd); /* Write back Month & Weekday */ 1271 rtc_outb(bin2bcd(y%100)); /* Write back Year */ 1272 1273 rtc_serialcom(0x02); /* Time set & Counter hold command. */ 1274 rtc_serialcom(0x00); /* Register hold command. */ 1275#else 1276 /* Disable RTC updates and interrupts. */ 1277 writertc(RTC_STATUSB, RTCSB_HALT | RTCSB_24HR); 1278 1279 /* Calculate local time to put in RTC */ 1280 1281 tm -= tz.tz_minuteswest * 60 + (wall_cmos_clock ? adjkerntz : 0); 1282 1283 writertc(RTC_SEC, bin2bcd(tm%60)); tm /= 60; /* Write back Seconds */ 1284 writertc(RTC_MIN, bin2bcd(tm%60)); tm /= 60; /* Write back Minutes */ 1285 writertc(RTC_HRS, bin2bcd(tm%24)); tm /= 24; /* Write back Hours */ 1286 1287 /* We have now the days since 01-01-1970 in tm */ 1288 writertc(RTC_WDAY, (tm+4)%7); /* Write back Weekday */ 1289 for (y = 1970, m = DAYSPERYEAR + LEAPYEAR(y); 1290 tm >= m; 1291 y++, m = DAYSPERYEAR + LEAPYEAR(y)) 1292 tm -= m; 1293 1294 /* Now we have the years in y and the day-of-the-year in tm */ 1295 writertc(RTC_YEAR, bin2bcd(y%100)); /* Write back Year */ 1296#ifdef USE_RTC_CENTURY 1297 writertc(RTC_CENTURY, bin2bcd(y/100)); /* ... and Century */ 1298#endif 1299 for (m = 0; ; m++) { 1300 int ml; 1301 1302 ml = daysinmonth[m]; 1303 if (m == 1 && LEAPYEAR(y)) 1304 ml++; 1305 if (tm < ml) 1306 break; 1307 tm -= ml; 1308 } 1309 1310 writertc(RTC_MONTH, bin2bcd(m + 1)); /* Write back Month */ 1311 writertc(RTC_DAY, bin2bcd(tm + 1)); /* Write back Month Day */ 1312 1313 /* Reenable RTC updates and interrupts. */ 1314 writertc(RTC_STATUSB, rtc_statusb); 1315#endif /* PC98 */ 1316} 1317 1318 1319/* 1320 * Start both clocks running. 1321 */ 1322void 1323cpu_initclocks() 1324{ 1325#ifdef APIC_IO 1326 int apic_8254_trial, num_8254_ticks; 1327 struct intrec *clkdesc, *rtcdesc; 1328#endif /* APIC_IO */ 1329#ifndef PC98 1330 int diag; 1331 1332 if (statclock_disable) { 1333 /* 1334 * The stat interrupt mask is different without the 1335 * statistics clock. Also, don't set the interrupt 1336 * flag which would normally cause the RTC to generate 1337 * interrupts. 1338 */ 1339 stat_imask = HWI_MASK | SWI_MASK; 1340 rtc_statusb = RTCSB_24HR; 1341 } else { 1342 /* Setting stathz to nonzero early helps avoid races. */ 1343 stathz = RTC_NOPROFRATE; 1344 profhz = RTC_PROFRATE; 1345 } 1346#endif 1347 1348 /* Finish initializing 8253 timer 0. */ 1349#ifdef APIC_IO 1350 1351 apic_8254_intr = isa_apic_irq(0); 1352 apic_8254_trial = 0; 1353 if (apic_8254_intr >= 0 ) { 1354 if (apic_int_type(0, 0) == 3) 1355 apic_8254_trial = 1; 1356 } else { 1357 /* look for ExtInt on pin 0 */ 1358 if (apic_int_type(0, 0) == 3) { 1359 apic_8254_intr = apic_irq(0, 0); 1360 setup_8254_mixed_mode(); 1361 } else 1362 panic("APIC_IO: Cannot route 8254 interrupt to CPU"); 1363 } 1364#else /* APIC_IO */ 1365 1366 /* 1367 * XXX Check the priority of this interrupt handler. I 1368 * couldn't find anything suitable in the BSD/OS code (grog, 1369 * 19 July 2000). 1370 */ 1371 /* Setup the PIC clk handler. The APIC handler is setup later */ 1372 inthand_add("clk", 0, (inthand2_t *)clkintr, NULL, PI_REALTIME, 1373 INTR_EXCL); 1374 INTREN(IRQ0); 1375 1376#endif /* APIC_IO */ 1377 1378#ifndef PC98 1379 /* Initialize RTC. */ 1380 writertc(RTC_STATUSA, rtc_statusa); 1381 writertc(RTC_STATUSB, RTCSB_24HR); 1382 1383 /* Don't bother enabling the statistics clock. */ 1384 if (statclock_disable) { 1385#ifdef APIC_IO 1386 /* 1387 * XXX - if statclock is disabled, don't attempt the APIC 1388 * trial. Not sure this is sane for APIC_IO. 1389 */ 1390 inthand_add("clk", apic_8254_intr, (inthand2_t *)clkintr, NULL, 1391 PI_REALTIME, INTR_EXCL); 1392 INTREN(1 << apic_8254_intr); 1393#endif /* APIC_IO */ 1394 return; 1395 } 1396 diag = rtcin(RTC_DIAG); 1397 if (diag != 0) 1398 printf("RTC BIOS diagnostic error %b\n", diag, RTCDG_BITS); 1399#endif /* !PC98 */ 1400 1401#ifdef APIC_IO 1402#ifndef PC98 1403 if (isa_apic_irq(8) != 8) 1404 panic("APIC RTC != 8"); 1405#endif 1406 1407 if (apic_8254_trial) { 1408 /* 1409 * XXX - We use fast interrupts for clk and rtc long enough to 1410 * perform the APIC probe and then revert to exclusive 1411 * interrupts. 1412 */ 1413 clkdesc = inthand_add("clk", apic_8254_intr, 1414 (inthand2_t *)clkintr, NULL, PI_REALTIME, INTR_FAST); 1415 INTREN(1 << apic_8254_intr); 1416 1417 rtcdesc = inthand_add("rtc", 8, (inthand2_t *)rtcintr, NULL, 1418 PI_REALTIME, INTR_FAST); /* XXX */ 1419 INTREN(APIC_IRQ8); 1420 writertc(RTC_STATUSB, rtc_statusb); 1421 1422 printf("APIC_IO: Testing 8254 interrupt delivery\n"); 1423 while (read_intr_count(8) < 6) 1424 ; /* nothing */ 1425 num_8254_ticks = read_intr_count(apic_8254_intr); 1426 1427 /* disable and remove our fake handlers */ 1428 INTRDIS(1 << apic_8254_intr); 1429 inthand_remove(clkdesc); 1430 1431 writertc(RTC_STATUSA, rtc_statusa); 1432 writertc(RTC_STATUSB, RTCSB_24HR); 1433 1434 INTRDIS(APIC_IRQ8); 1435 inthand_remove(rtcdesc); 1436 1437 if (num_8254_ticks < 3) { 1438 /* 1439 * The MP table is broken. 1440 * The 8254 was not connected to the specified pin 1441 * on the IO APIC. 1442 * Workaround: Limited variant of mixed mode. 1443 */ 1444 printf("APIC_IO: Broken MP table detected: " 1445 "8254 is not connected to " 1446 "IOAPIC #%d intpin %d\n", 1447 int_to_apicintpin[apic_8254_intr].ioapic, 1448 int_to_apicintpin[apic_8254_intr].int_pin); 1449 /* 1450 * Revoke current ISA IRQ 0 assignment and 1451 * configure a fallback interrupt routing from 1452 * the 8254 Timer via the 8259 PIC to the 1453 * an ExtInt interrupt line on IOAPIC #0 intpin 0. 1454 * We reuse the low level interrupt handler number. 1455 */ 1456 if (apic_irq(0, 0) < 0) { 1457 revoke_apic_irq(apic_8254_intr); 1458 assign_apic_irq(0, 0, apic_8254_intr); 1459 } 1460 apic_8254_intr = apic_irq(0, 0); 1461 setup_8254_mixed_mode(); 1462 } 1463 1464 } 1465 1466 /* Finally, setup the real clock handlers */ 1467 inthand_add("clk", apic_8254_intr, (inthand2_t *)clkintr, NULL, 1468 PI_REALTIME, INTR_EXCL); 1469 INTREN(1 << apic_8254_intr); 1470#endif 1471 1472#ifndef PC98 1473 inthand_add("rtc", 8, (inthand2_t *)rtcintr, NULL, PI_REALTIME, 1474 INTR_EXCL); 1475#ifdef APIC_IO 1476 INTREN(APIC_IRQ8); 1477#else 1478 INTREN(IRQ8); 1479#endif 1480 1481 writertc(RTC_STATUSB, rtc_statusb); 1482#endif 1483 1484#ifdef APIC_IO 1485 if (apic_int_type(0, 0) != 3 || 1486 int_to_apicintpin[apic_8254_intr].ioapic != 0 || 1487 int_to_apicintpin[apic_8254_intr].int_pin != 0) 1488 printf("APIC_IO: routing 8254 via IOAPIC #%d intpin %d\n", 1489 int_to_apicintpin[apic_8254_intr].ioapic, 1490 int_to_apicintpin[apic_8254_intr].int_pin); 1491 else 1492 printf("APIC_IO: " 1493 "routing 8254 via 8259 and IOAPIC #0 intpin 0\n"); 1494#endif 1495 1496} 1497 1498#ifdef APIC_IO 1499static u_long 1500read_intr_count(int vec) 1501{ 1502 u_long *up; 1503 up = intr_countp[vec]; 1504 if (up) 1505 return *up; 1506 return 0UL; 1507} 1508 1509static void 1510setup_8254_mixed_mode() 1511{ 1512 /* 1513 * Allow 8254 timer to INTerrupt 8259: 1514 * re-initialize master 8259: 1515 * reset; prog 4 bytes, single ICU, edge triggered 1516 */ 1517 outb(IO_ICU1, 0x13); 1518#ifdef PC98 1519 outb(IO_ICU1 + 2, NRSVIDT); /* start vector (unused) */ 1520 outb(IO_ICU1 + 2, 0x00); /* ignore slave */ 1521 outb(IO_ICU1 + 2, 0x03); /* auto EOI, 8086 */ 1522 outb(IO_ICU1 + 2, 0xfe); /* unmask INT0 */ 1523#else 1524 outb(IO_ICU1 + 1, NRSVIDT); /* start vector (unused) */ 1525 outb(IO_ICU1 + 1, 0x00); /* ignore slave */ 1526 outb(IO_ICU1 + 1, 0x03); /* auto EOI, 8086 */ 1527 outb(IO_ICU1 + 1, 0xfe); /* unmask INT0 */ 1528#endif 1529 /* program IO APIC for type 3 INT on INT0 */ 1530 if (ext_int_setup(0, 0) < 0) 1531 panic("8254 redirect via APIC pin0 impossible!"); 1532} 1533#endif 1534 1535void 1536setstatclockrate(int newhz) 1537{ 1538#ifndef PC98 1539 if (newhz == RTC_PROFRATE) 1540 rtc_statusa = RTCSA_DIVIDER | RTCSA_PROF; 1541 else 1542 rtc_statusa = RTCSA_DIVIDER | RTCSA_NOPROF; 1543 writertc(RTC_STATUSA, rtc_statusa); 1544#endif 1545} 1546 1547static int 1548sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS) 1549{ 1550 int error; 1551 u_int freq; 1552 1553 /* 1554 * Use `i8254' instead of `timer' in external names because `timer' 1555 * is is too generic. Should use it everywhere. 1556 */ 1557 freq = timer_freq; 1558 error = sysctl_handle_int(oidp, &freq, sizeof(freq), req); 1559 if (error == 0 && req->newptr != NULL) { 1560 if (timer0_state != RELEASED) 1561 return (EBUSY); /* too much trouble to handle */ 1562 set_timer_freq(freq, hz); 1563 i8254_timecounter.tc_frequency = freq; 1564 tc_update(&i8254_timecounter); 1565 } 1566 return (error); 1567} 1568 1569SYSCTL_PROC(_machdep, OID_AUTO, i8254_freq, CTLTYPE_INT | CTLFLAG_RW, 1570 0, sizeof(u_int), sysctl_machdep_i8254_freq, "I", ""); 1571 1572static int 1573sysctl_machdep_tsc_freq(SYSCTL_HANDLER_ARGS) 1574{ 1575 int error; 1576 u_int freq; 1577 1578 if (tsc_timecounter.tc_frequency == 0) 1579 return (EOPNOTSUPP); 1580 freq = tsc_freq; 1581 error = sysctl_handle_int(oidp, &freq, sizeof(freq), req); 1582 if (error == 0 && req->newptr != NULL) { 1583 tsc_freq = freq; 1584 tsc_timecounter.tc_frequency = tsc_freq; 1585 tc_update(&tsc_timecounter); 1586 } 1587 return (error); 1588} 1589 1590SYSCTL_PROC(_machdep, OID_AUTO, tsc_freq, CTLTYPE_INT | CTLFLAG_RW, 1591 0, sizeof(u_int), sysctl_machdep_tsc_freq, "I", ""); 1592 1593static unsigned 1594i8254_get_timecount(struct timecounter *tc) 1595{ 1596 u_int count; 1597 int intrsave; 1598 u_int high, low; 1599 1600 intrsave = save_intr(); 1601 disable_intr(); 1602 CLOCK_LOCK(); 1603 1604 /* Select timer0 and latch counter value. */ 1605 outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH); 1606 1607 low = inb(TIMER_CNTR0); 1608 high = inb(TIMER_CNTR0); 1609 count = timer0_max_count - ((high << 8) | low); 1610 if (count < i8254_lastcount || 1611 (!i8254_ticked && (clkintr_pending || 1612 ((count < 20 || (!(intrsave & PSL_I) && count < timer0_max_count / 2u)) && 1613#ifdef APIC_IO 1614#define lapic_irr1 ((volatile u_int *)&lapic)[0x210 / 4] /* XXX XXX */ 1615 /* XXX this assumes that apic_8254_intr is < 24. */ 1616 (lapic_irr1 & (1 << apic_8254_intr)))) 1617#else 1618 (inb(IO_ICU1) & 1))) 1619#endif 1620 )) { 1621 i8254_ticked = 1; 1622 i8254_offset += timer0_max_count; 1623 } 1624 i8254_lastcount = count; 1625 count += i8254_offset; 1626 CLOCK_UNLOCK(); 1627 restore_intr(intrsave); 1628 return (count); 1629} 1630 1631static unsigned 1632tsc_get_timecount(struct timecounter *tc) 1633{ 1634 return (rdtsc()); 1635} 1636 1637/* 1638 * Attach to the ISA PnP descriptors for the timer and realtime clock. 1639 */ 1640static struct isa_pnp_id attimer_ids[] = { 1641 { 0x0001d041 /* PNP0100 */, "AT timer" }, 1642 { 0x000bd041 /* PNP0B00 */, "AT realtime clock" }, 1643 { 0 } 1644}; 1645 1646static int 1647attimer_probe(device_t dev) 1648{ 1649 int result; 1650 1651 if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, attimer_ids)) <= 0) 1652 device_quiet(dev); 1653 return(result); 1654} 1655 1656static int 1657attimer_attach(device_t dev) 1658{ 1659 return(0); 1660} 1661 1662static device_method_t attimer_methods[] = { 1663 /* Device interface */ 1664 DEVMETHOD(device_probe, attimer_probe), 1665 DEVMETHOD(device_attach, attimer_attach), 1666 DEVMETHOD(device_detach, bus_generic_detach), 1667 DEVMETHOD(device_shutdown, bus_generic_shutdown), 1668 DEVMETHOD(device_suspend, bus_generic_suspend), /* XXX stop statclock? */ 1669 DEVMETHOD(device_resume, bus_generic_resume), /* XXX restart statclock? */ 1670 { 0, 0 } 1671}; 1672 1673static driver_t attimer_driver = { 1674 "attimer", 1675 attimer_methods, 1676 1, /* no softc */ 1677}; 1678 1679static devclass_t attimer_devclass; 1680 1681DRIVER_MODULE(attimer, isa, attimer_driver, attimer_devclass, 0, 0); 1682