in6_src.c revision 231852
1/*-
2 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the project nor the names of its contributors
14 *    may be used to endorse or promote products derived from this software
15 *    without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 *	$KAME: in6_src.c,v 1.132 2003/08/26 04:42:27 keiichi Exp $
30 */
31
32/*-
33 * Copyright (c) 1982, 1986, 1991, 1993
34 *	The Regents of the University of California.  All rights reserved.
35 *
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
38 * are met:
39 * 1. Redistributions of source code must retain the above copyright
40 *    notice, this list of conditions and the following disclaimer.
41 * 2. Redistributions in binary form must reproduce the above copyright
42 *    notice, this list of conditions and the following disclaimer in the
43 *    documentation and/or other materials provided with the distribution.
44 * 4. Neither the name of the University nor the names of its contributors
45 *    may be used to endorse or promote products derived from this software
46 *    without specific prior written permission.
47 *
48 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58 * SUCH DAMAGE.
59 *
60 *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
61 */
62
63#include <sys/cdefs.h>
64__FBSDID("$FreeBSD: head/sys/netinet6/in6_src.c 231852 2012-02-17 02:39:58Z bz $");
65
66#include "opt_inet.h"
67#include "opt_inet6.h"
68#include "opt_mpath.h"
69
70#include <sys/param.h>
71#include <sys/systm.h>
72#include <sys/lock.h>
73#include <sys/malloc.h>
74#include <sys/mbuf.h>
75#include <sys/priv.h>
76#include <sys/protosw.h>
77#include <sys/socket.h>
78#include <sys/socketvar.h>
79#include <sys/sockio.h>
80#include <sys/sysctl.h>
81#include <sys/errno.h>
82#include <sys/time.h>
83#include <sys/jail.h>
84#include <sys/kernel.h>
85#include <sys/sx.h>
86
87#include <net/if.h>
88#include <net/if_dl.h>
89#include <net/route.h>
90#include <net/if_llatbl.h>
91#ifdef RADIX_MPATH
92#include <net/radix_mpath.h>
93#endif
94
95#include <netinet/in.h>
96#include <netinet/in_var.h>
97#include <netinet/in_systm.h>
98#include <netinet/ip.h>
99#include <netinet/in_pcb.h>
100#include <netinet/ip_var.h>
101#include <netinet/udp.h>
102#include <netinet/udp_var.h>
103
104#include <netinet6/in6_var.h>
105#include <netinet/ip6.h>
106#include <netinet6/in6_pcb.h>
107#include <netinet6/ip6_var.h>
108#include <netinet6/scope6_var.h>
109#include <netinet6/nd6.h>
110
111static struct mtx addrsel_lock;
112#define	ADDRSEL_LOCK_INIT()	mtx_init(&addrsel_lock, "addrsel_lock", NULL, MTX_DEF)
113#define	ADDRSEL_LOCK()		mtx_lock(&addrsel_lock)
114#define	ADDRSEL_UNLOCK()	mtx_unlock(&addrsel_lock)
115#define	ADDRSEL_LOCK_ASSERT()	mtx_assert(&addrsel_lock, MA_OWNED)
116
117static struct sx addrsel_sxlock;
118#define	ADDRSEL_SXLOCK_INIT()	sx_init(&addrsel_sxlock, "addrsel_sxlock")
119#define	ADDRSEL_SLOCK()		sx_slock(&addrsel_sxlock)
120#define	ADDRSEL_SUNLOCK()	sx_sunlock(&addrsel_sxlock)
121#define	ADDRSEL_XLOCK()		sx_xlock(&addrsel_sxlock)
122#define	ADDRSEL_XUNLOCK()	sx_xunlock(&addrsel_sxlock)
123
124#define ADDR_LABEL_NOTAPP (-1)
125static VNET_DEFINE(struct in6_addrpolicy, defaultaddrpolicy);
126#define	V_defaultaddrpolicy		VNET(defaultaddrpolicy)
127
128VNET_DEFINE(int, ip6_prefer_tempaddr) = 0;
129
130static int selectroute __P((struct sockaddr_in6 *, struct ip6_pktopts *,
131	struct ip6_moptions *, struct route_in6 *, struct ifnet **,
132	struct rtentry **, int, int));
133static int in6_selectif __P((struct sockaddr_in6 *, struct ip6_pktopts *,
134	struct ip6_moptions *, struct route_in6 *ro, struct ifnet **,
135	struct ifnet *, int));
136
137static struct in6_addrpolicy *lookup_addrsel_policy(struct sockaddr_in6 *);
138
139static void init_policy_queue(void);
140static int add_addrsel_policyent(struct in6_addrpolicy *);
141static int delete_addrsel_policyent(struct in6_addrpolicy *);
142static int walk_addrsel_policy __P((int (*)(struct in6_addrpolicy *, void *),
143				    void *));
144static int dump_addrsel_policyent(struct in6_addrpolicy *, void *);
145static struct in6_addrpolicy *match_addrsel_policy(struct sockaddr_in6 *);
146
147/*
148 * Return an IPv6 address, which is the most appropriate for a given
149 * destination and user specified options.
150 * If necessary, this function lookups the routing table and returns
151 * an entry to the caller for later use.
152 */
153#define REPLACE(r) do {\
154	if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
155		sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
156		V_ip6stat.ip6s_sources_rule[(r)]++; \
157	/* { \
158	char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
159	printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
160	} */ \
161	goto replace; \
162} while(0)
163#define NEXT(r) do {\
164	if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
165		sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
166		V_ip6stat.ip6s_sources_rule[(r)]++; \
167	/* { \
168	char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
169	printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
170	} */ \
171	goto next;		/* XXX: we can't use 'continue' here */ \
172} while(0)
173#define BREAK(r) do { \
174	if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
175		sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
176		V_ip6stat.ip6s_sources_rule[(r)]++; \
177	goto out;		/* XXX: we can't use 'break' here */ \
178} while(0)
179
180int
181in6_selectsrc(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
182    struct inpcb *inp, struct route_in6 *ro, struct ucred *cred,
183    struct ifnet **ifpp, struct in6_addr *srcp)
184{
185	struct in6_addr dst, tmp;
186	struct ifnet *ifp = NULL, *oifp = NULL;
187	struct in6_ifaddr *ia = NULL, *ia_best = NULL;
188	struct in6_pktinfo *pi = NULL;
189	int dst_scope = -1, best_scope = -1, best_matchlen = -1;
190	struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
191	u_int32_t odstzone;
192	int prefer_tempaddr;
193	int error;
194	struct ip6_moptions *mopts;
195
196	KASSERT(srcp != NULL, ("%s: srcp is NULL", __func__));
197
198	dst = dstsock->sin6_addr; /* make a copy for local operation */
199	if (ifpp) {
200		/*
201		 * Save a possibly passed in ifp for in6_selectsrc. Only
202		 * neighbor discovery code should use this feature, where
203		 * we may know the interface but not the FIB number holding
204		 * the connected subnet in case someone deleted it from the
205		 * default FIB and we need to check the interface.
206		 */
207		if (*ifpp != NULL)
208			oifp = *ifpp;
209		*ifpp = NULL;
210	}
211
212	if (inp != NULL) {
213		INP_LOCK_ASSERT(inp);
214		mopts = inp->in6p_moptions;
215	} else {
216		mopts = NULL;
217	}
218
219	/*
220	 * If the source address is explicitly specified by the caller,
221	 * check if the requested source address is indeed a unicast address
222	 * assigned to the node, and can be used as the packet's source
223	 * address.  If everything is okay, use the address as source.
224	 */
225	if (opts && (pi = opts->ip6po_pktinfo) &&
226	    !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
227		struct sockaddr_in6 srcsock;
228		struct in6_ifaddr *ia6;
229
230		/* get the outgoing interface */
231		if ((error = in6_selectif(dstsock, opts, mopts, ro, &ifp, oifp,
232		    (inp != NULL) ? inp->inp_inc.inc_fibnum : RT_DEFAULT_FIB))
233		    != 0)
234			return (error);
235
236		/*
237		 * determine the appropriate zone id of the source based on
238		 * the zone of the destination and the outgoing interface.
239		 * If the specified address is ambiguous wrt the scope zone,
240		 * the interface must be specified; otherwise, ifa_ifwithaddr()
241		 * will fail matching the address.
242		 */
243		bzero(&srcsock, sizeof(srcsock));
244		srcsock.sin6_family = AF_INET6;
245		srcsock.sin6_len = sizeof(srcsock);
246		srcsock.sin6_addr = pi->ipi6_addr;
247		if (ifp) {
248			error = in6_setscope(&srcsock.sin6_addr, ifp, NULL);
249			if (error)
250				return (error);
251		}
252		if (cred != NULL && (error = prison_local_ip6(cred,
253		    &srcsock.sin6_addr, (inp != NULL &&
254		    (inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
255			return (error);
256
257		ia6 = (struct in6_ifaddr *)ifa_ifwithaddr(
258		    (struct sockaddr *)&srcsock);
259		if (ia6 == NULL ||
260		    (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY))) {
261			if (ia6 != NULL)
262				ifa_free(&ia6->ia_ifa);
263			return (EADDRNOTAVAIL);
264		}
265		pi->ipi6_addr = srcsock.sin6_addr; /* XXX: this overrides pi */
266		if (ifpp)
267			*ifpp = ifp;
268		bcopy(&ia6->ia_addr.sin6_addr, srcp, sizeof(*srcp));
269		ifa_free(&ia6->ia_ifa);
270		return (0);
271	}
272
273	/*
274	 * Otherwise, if the socket has already bound the source, just use it.
275	 */
276	if (inp != NULL && !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
277		if (cred != NULL &&
278		    (error = prison_local_ip6(cred, &inp->in6p_laddr,
279		    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
280			return (error);
281		bcopy(&inp->in6p_laddr, srcp, sizeof(*srcp));
282		return (0);
283	}
284
285	/*
286	 * Bypass source address selection and use the primary jail IP
287	 * if requested.
288	 */
289	if (cred != NULL && !prison_saddrsel_ip6(cred, srcp))
290		return (0);
291
292	/*
293	 * If the address is not specified, choose the best one based on
294	 * the outgoing interface and the destination address.
295	 */
296	/* get the outgoing interface */
297	if ((error = in6_selectif(dstsock, opts, mopts, ro, &ifp, oifp,
298	    (inp != NULL) ? inp->inp_inc.inc_fibnum : RT_DEFAULT_FIB)) != 0)
299		return (error);
300
301#ifdef DIAGNOSTIC
302	if (ifp == NULL)	/* this should not happen */
303		panic("in6_selectsrc: NULL ifp");
304#endif
305	error = in6_setscope(&dst, ifp, &odstzone);
306	if (error)
307		return (error);
308
309	IN6_IFADDR_RLOCK();
310	TAILQ_FOREACH(ia, &V_in6_ifaddrhead, ia_link) {
311		int new_scope = -1, new_matchlen = -1;
312		struct in6_addrpolicy *new_policy = NULL;
313		u_int32_t srczone, osrczone, dstzone;
314		struct in6_addr src;
315		struct ifnet *ifp1 = ia->ia_ifp;
316
317		/*
318		 * We'll never take an address that breaks the scope zone
319		 * of the destination.  We also skip an address if its zone
320		 * does not contain the outgoing interface.
321		 * XXX: we should probably use sin6_scope_id here.
322		 */
323		if (in6_setscope(&dst, ifp1, &dstzone) ||
324		    odstzone != dstzone) {
325			continue;
326		}
327		src = ia->ia_addr.sin6_addr;
328		if (in6_setscope(&src, ifp, &osrczone) ||
329		    in6_setscope(&src, ifp1, &srczone) ||
330		    osrczone != srczone) {
331			continue;
332		}
333
334		/* avoid unusable addresses */
335		if ((ia->ia6_flags &
336		     (IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
337				continue;
338		}
339		if (!V_ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
340			continue;
341
342		/* If jailed only take addresses of the jail into account. */
343		if (cred != NULL &&
344		    prison_check_ip6(cred, &ia->ia_addr.sin6_addr) != 0)
345			continue;
346
347		/* Rule 1: Prefer same address */
348		if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
349			ia_best = ia;
350			BREAK(1); /* there should be no better candidate */
351		}
352
353		if (ia_best == NULL)
354			REPLACE(0);
355
356		/* Rule 2: Prefer appropriate scope */
357		if (dst_scope < 0)
358			dst_scope = in6_addrscope(&dst);
359		new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
360		if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
361			if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
362				REPLACE(2);
363			NEXT(2);
364		} else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
365			if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
366				NEXT(2);
367			REPLACE(2);
368		}
369
370		/*
371		 * Rule 3: Avoid deprecated addresses.  Note that the case of
372		 * !ip6_use_deprecated is already rejected above.
373		 */
374		if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
375			NEXT(3);
376		if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
377			REPLACE(3);
378
379		/* Rule 4: Prefer home addresses */
380		/*
381		 * XXX: This is a TODO.  We should probably merge the MIP6
382		 * case above.
383		 */
384
385		/* Rule 5: Prefer outgoing interface */
386		if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
387			NEXT(5);
388		if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
389			REPLACE(5);
390
391		/*
392		 * Rule 6: Prefer matching label
393		 * Note that best_policy should be non-NULL here.
394		 */
395		if (dst_policy == NULL)
396			dst_policy = lookup_addrsel_policy(dstsock);
397		if (dst_policy->label != ADDR_LABEL_NOTAPP) {
398			new_policy = lookup_addrsel_policy(&ia->ia_addr);
399			if (dst_policy->label == best_policy->label &&
400			    dst_policy->label != new_policy->label)
401				NEXT(6);
402			if (dst_policy->label != best_policy->label &&
403			    dst_policy->label == new_policy->label)
404				REPLACE(6);
405		}
406
407		/*
408		 * Rule 7: Prefer public addresses.
409		 * We allow users to reverse the logic by configuring
410		 * a sysctl variable, so that privacy conscious users can
411		 * always prefer temporary addresses.
412		 */
413		if (opts == NULL ||
414		    opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
415			prefer_tempaddr = V_ip6_prefer_tempaddr;
416		} else if (opts->ip6po_prefer_tempaddr ==
417		    IP6PO_TEMPADDR_NOTPREFER) {
418			prefer_tempaddr = 0;
419		} else
420			prefer_tempaddr = 1;
421		if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
422		    (ia->ia6_flags & IN6_IFF_TEMPORARY)) {
423			if (prefer_tempaddr)
424				REPLACE(7);
425			else
426				NEXT(7);
427		}
428		if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
429		    !(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
430			if (prefer_tempaddr)
431				NEXT(7);
432			else
433				REPLACE(7);
434		}
435
436		/*
437		 * Rule 8: prefer addresses on alive interfaces.
438		 * This is a KAME specific rule.
439		 */
440		if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
441		    !(ia->ia_ifp->if_flags & IFF_UP))
442			NEXT(8);
443		if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
444		    (ia->ia_ifp->if_flags & IFF_UP))
445			REPLACE(8);
446
447		/*
448		 * Rule 14: Use longest matching prefix.
449		 * Note: in the address selection draft, this rule is
450		 * documented as "Rule 8".  However, since it is also
451		 * documented that this rule can be overridden, we assign
452		 * a large number so that it is easy to assign smaller numbers
453		 * to more preferred rules.
454		 */
455		new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
456		if (best_matchlen < new_matchlen)
457			REPLACE(14);
458		if (new_matchlen < best_matchlen)
459			NEXT(14);
460
461		/* Rule 15 is reserved. */
462
463		/*
464		 * Last resort: just keep the current candidate.
465		 * Or, do we need more rules?
466		 */
467		continue;
468
469	  replace:
470		ia_best = ia;
471		best_scope = (new_scope >= 0 ? new_scope :
472			      in6_addrscope(&ia_best->ia_addr.sin6_addr));
473		best_policy = (new_policy ? new_policy :
474			       lookup_addrsel_policy(&ia_best->ia_addr));
475		best_matchlen = (new_matchlen >= 0 ? new_matchlen :
476				 in6_matchlen(&ia_best->ia_addr.sin6_addr,
477					      &dst));
478
479	  next:
480		continue;
481
482	  out:
483		break;
484	}
485
486	if ((ia = ia_best) == NULL) {
487		IN6_IFADDR_RUNLOCK();
488		return (EADDRNOTAVAIL);
489	}
490
491	/*
492	 * At this point at least one of the addresses belonged to the jail
493	 * but it could still be, that we want to further restrict it, e.g.
494	 * theoratically IN6_IS_ADDR_LOOPBACK.
495	 * It must not be IN6_IS_ADDR_UNSPECIFIED anymore.
496	 * prison_local_ip6() will fix an IN6_IS_ADDR_LOOPBACK but should
497	 * let all others previously selected pass.
498	 * Use tmp to not change ::1 on lo0 to the primary jail address.
499	 */
500	tmp = ia->ia_addr.sin6_addr;
501	if (cred != NULL && prison_local_ip6(cred, &tmp, (inp != NULL &&
502	    (inp->inp_flags & IN6P_IPV6_V6ONLY) != 0)) != 0) {
503		IN6_IFADDR_RUNLOCK();
504		return (EADDRNOTAVAIL);
505	}
506
507	if (ifpp)
508		*ifpp = ifp;
509
510	bcopy(&tmp, srcp, sizeof(*srcp));
511	IN6_IFADDR_RUNLOCK();
512	return (0);
513}
514
515/*
516 * clone - meaningful only for bsdi and freebsd
517 */
518static int
519selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
520    struct ip6_moptions *mopts, struct route_in6 *ro,
521    struct ifnet **retifp, struct rtentry **retrt, int norouteok, int fibnum)
522{
523	int error = 0;
524	struct ifnet *ifp = NULL;
525	struct rtentry *rt = NULL;
526	struct sockaddr_in6 *sin6_next;
527	struct in6_pktinfo *pi = NULL;
528	struct in6_addr *dst = &dstsock->sin6_addr;
529#if 0
530	char ip6buf[INET6_ADDRSTRLEN];
531
532	if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
533	    dstsock->sin6_addr.s6_addr32[1] == 0 &&
534	    !IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
535		printf("in6_selectroute: strange destination %s\n",
536		       ip6_sprintf(ip6buf, &dstsock->sin6_addr));
537	} else {
538		printf("in6_selectroute: destination = %s%%%d\n",
539		       ip6_sprintf(ip6buf, &dstsock->sin6_addr),
540		       dstsock->sin6_scope_id); /* for debug */
541	}
542#endif
543
544	/* If the caller specify the outgoing interface explicitly, use it. */
545	if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
546		/* XXX boundary check is assumed to be already done. */
547		ifp = ifnet_byindex(pi->ipi6_ifindex);
548		if (ifp != NULL &&
549		    (norouteok || retrt == NULL ||
550		    IN6_IS_ADDR_MULTICAST(dst))) {
551			/*
552			 * we do not have to check or get the route for
553			 * multicast.
554			 */
555			goto done;
556		} else
557			goto getroute;
558	}
559
560	/*
561	 * If the destination address is a multicast address and the outgoing
562	 * interface for the address is specified by the caller, use it.
563	 */
564	if (IN6_IS_ADDR_MULTICAST(dst) &&
565	    mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
566		goto done; /* we do not need a route for multicast. */
567	}
568
569  getroute:
570	/*
571	 * If the next hop address for the packet is specified by the caller,
572	 * use it as the gateway.
573	 */
574	if (opts && opts->ip6po_nexthop) {
575		struct route_in6 *ron;
576		struct llentry *la;
577
578		sin6_next = satosin6(opts->ip6po_nexthop);
579
580		/* at this moment, we only support AF_INET6 next hops */
581		if (sin6_next->sin6_family != AF_INET6) {
582			error = EAFNOSUPPORT; /* or should we proceed? */
583			goto done;
584		}
585
586		/*
587		 * If the next hop is an IPv6 address, then the node identified
588		 * by that address must be a neighbor of the sending host.
589		 */
590		ron = &opts->ip6po_nextroute;
591		/*
592		 * XXX what do we do here?
593		 * PLZ to be fixing
594		 */
595
596
597		if (ron->ro_rt == NULL) {
598			in6_rtalloc(ron, fibnum); /* multi path case? */
599			if (ron->ro_rt == NULL) {
600				if (ron->ro_rt) {
601					RTFREE(ron->ro_rt);
602					ron->ro_rt = NULL;
603				}
604				error = EHOSTUNREACH;
605				goto done;
606			}
607		}
608
609		rt = ron->ro_rt;
610		ifp = rt->rt_ifp;
611		IF_AFDATA_LOCK(ifp);
612		la = lla_lookup(LLTABLE6(ifp), 0, (struct sockaddr *)&sin6_next->sin6_addr);
613		IF_AFDATA_UNLOCK(ifp);
614		if (la != NULL)
615			LLE_RUNLOCK(la);
616		else {
617			error = EHOSTUNREACH;
618			goto done;
619		}
620#if 0
621		if ((ron->ro_rt &&
622		     (ron->ro_rt->rt_flags & (RTF_UP | RTF_LLINFO)) !=
623		     (RTF_UP | RTF_LLINFO)) ||
624		    !IN6_ARE_ADDR_EQUAL(&satosin6(&ron->ro_dst)->sin6_addr,
625		    &sin6_next->sin6_addr)) {
626			if (ron->ro_rt) {
627				RTFREE(ron->ro_rt);
628				ron->ro_rt = NULL;
629			}
630			*satosin6(&ron->ro_dst) = *sin6_next;
631		}
632		if (ron->ro_rt == NULL) {
633			in6_rtalloc(ron); /* multi path case? */
634			if (ron->ro_rt == NULL ||
635			    !(ron->ro_rt->rt_flags & RTF_LLINFO)) {
636				if (ron->ro_rt) {
637					RTFREE(ron->ro_rt);
638					ron->ro_rt = NULL;
639				}
640				error = EHOSTUNREACH;
641				goto done;
642			}
643		}
644#endif
645
646		/*
647		 * When cloning is required, try to allocate a route to the
648		 * destination so that the caller can store path MTU
649		 * information.
650		 */
651		goto done;
652	}
653
654	/*
655	 * Use a cached route if it exists and is valid, else try to allocate
656	 * a new one.  Note that we should check the address family of the
657	 * cached destination, in case of sharing the cache with IPv4.
658	 */
659	if (ro) {
660		if (ro->ro_rt &&
661		    (!(ro->ro_rt->rt_flags & RTF_UP) ||
662		     ((struct sockaddr *)(&ro->ro_dst))->sa_family != AF_INET6 ||
663		     !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
664		     dst))) {
665			RTFREE(ro->ro_rt);
666			ro->ro_rt = (struct rtentry *)NULL;
667		}
668		if (ro->ro_rt == (struct rtentry *)NULL) {
669			struct sockaddr_in6 *sa6;
670
671			/* No route yet, so try to acquire one */
672			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
673			sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
674			*sa6 = *dstsock;
675			sa6->sin6_scope_id = 0;
676
677#ifdef RADIX_MPATH
678				rtalloc_mpath_fib((struct route *)ro,
679				    ntohl(sa6->sin6_addr.s6_addr32[3]), fibnum);
680#else
681				ro->ro_rt = in6_rtalloc1((struct sockaddr *)
682				    &ro->ro_dst, 0, 0UL, fibnum);
683				if (ro->ro_rt)
684					RT_UNLOCK(ro->ro_rt);
685#endif
686		}
687
688		/*
689		 * do not care about the result if we have the nexthop
690		 * explicitly specified.
691		 */
692		if (opts && opts->ip6po_nexthop)
693			goto done;
694
695		if (ro->ro_rt) {
696			ifp = ro->ro_rt->rt_ifp;
697
698			if (ifp == NULL) { /* can this really happen? */
699				RTFREE(ro->ro_rt);
700				ro->ro_rt = NULL;
701			}
702		}
703		if (ro->ro_rt == NULL)
704			error = EHOSTUNREACH;
705		rt = ro->ro_rt;
706
707		/*
708		 * Check if the outgoing interface conflicts with
709		 * the interface specified by ipi6_ifindex (if specified).
710		 * Note that loopback interface is always okay.
711		 * (this may happen when we are sending a packet to one of
712		 *  our own addresses.)
713		 */
714		if (ifp && opts && opts->ip6po_pktinfo &&
715		    opts->ip6po_pktinfo->ipi6_ifindex) {
716			if (!(ifp->if_flags & IFF_LOOPBACK) &&
717			    ifp->if_index !=
718			    opts->ip6po_pktinfo->ipi6_ifindex) {
719				error = EHOSTUNREACH;
720				goto done;
721			}
722		}
723	}
724
725  done:
726	if (ifp == NULL && rt == NULL) {
727		/*
728		 * This can happen if the caller did not pass a cached route
729		 * nor any other hints.  We treat this case an error.
730		 */
731		error = EHOSTUNREACH;
732	}
733	if (error == EHOSTUNREACH)
734		V_ip6stat.ip6s_noroute++;
735
736	if (retifp != NULL) {
737		*retifp = ifp;
738
739		/*
740		 * Adjust the "outgoing" interface.  If we're going to loop
741		 * the packet back to ourselves, the ifp would be the loopback
742		 * interface. However, we'd rather know the interface associated
743		 * to the destination address (which should probably be one of
744		 * our own addresses.)
745		 */
746		if (rt) {
747			if ((rt->rt_ifp->if_flags & IFF_LOOPBACK) &&
748			    (rt->rt_gateway->sa_family == AF_LINK))
749				*retifp =
750					ifnet_byindex(((struct sockaddr_dl *)
751						       rt->rt_gateway)->sdl_index);
752		}
753	}
754
755	if (retrt != NULL)
756		*retrt = rt;	/* rt may be NULL */
757
758	return (error);
759}
760
761static int
762in6_selectif(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
763    struct ip6_moptions *mopts, struct route_in6 *ro, struct ifnet **retifp,
764    struct ifnet *oifp, int fibnum)
765{
766	int error;
767	struct route_in6 sro;
768	struct rtentry *rt = NULL;
769
770	KASSERT(retifp != NULL, ("%s: retifp is NULL", __func__));
771
772	if (ro == NULL) {
773		bzero(&sro, sizeof(sro));
774		ro = &sro;
775	}
776
777	if ((error = selectroute(dstsock, opts, mopts, ro, retifp,
778	    &rt, 1, fibnum)) != 0) {
779		if (ro == &sro && rt && rt == sro.ro_rt)
780			RTFREE(rt);
781		/* Help ND. See oifp comment in in6_selectsrc(). */
782		if (oifp != NULL && fibnum == RT_DEFAULT_FIB) {
783			*retifp = oifp;
784			error = 0;
785		}
786		return (error);
787	}
788
789	/*
790	 * do not use a rejected or black hole route.
791	 * XXX: this check should be done in the L2 output routine.
792	 * However, if we skipped this check here, we'd see the following
793	 * scenario:
794	 * - install a rejected route for a scoped address prefix
795	 *   (like fe80::/10)
796	 * - send a packet to a destination that matches the scoped prefix,
797	 *   with ambiguity about the scope zone.
798	 * - pick the outgoing interface from the route, and disambiguate the
799	 *   scope zone with the interface.
800	 * - ip6_output() would try to get another route with the "new"
801	 *   destination, which may be valid.
802	 * - we'd see no error on output.
803	 * Although this may not be very harmful, it should still be confusing.
804	 * We thus reject the case here.
805	 */
806	if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE))) {
807		int flags = (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
808
809		if (ro == &sro && rt && rt == sro.ro_rt)
810			RTFREE(rt);
811		return (flags);
812	}
813
814	if (ro == &sro && rt && rt == sro.ro_rt)
815		RTFREE(rt);
816	return (0);
817}
818
819/*
820 * Public wrapper function to selectroute().
821 *
822 * XXX-BZ in6_selectroute() should and will grow the FIB argument. The
823 * in6_selectroute_fib() function is only there for backward compat on stable.
824 */
825int
826in6_selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
827    struct ip6_moptions *mopts, struct route_in6 *ro,
828    struct ifnet **retifp, struct rtentry **retrt)
829{
830
831	return (selectroute(dstsock, opts, mopts, ro, retifp,
832	    retrt, 0, RT_DEFAULT_FIB));
833}
834
835#ifndef BURN_BRIDGES
836int
837in6_selectroute_fib(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
838    struct ip6_moptions *mopts, struct route_in6 *ro,
839    struct ifnet **retifp, struct rtentry **retrt, int fibnum)
840{
841
842	return (selectroute(dstsock, opts, mopts, ro, retifp,
843	    retrt, 0, fibnum));
844}
845#endif
846
847/*
848 * Default hop limit selection. The precedence is as follows:
849 * 1. Hoplimit value specified via ioctl.
850 * 2. (If the outgoing interface is detected) the current
851 *     hop limit of the interface specified by router advertisement.
852 * 3. The system default hoplimit.
853 */
854int
855in6_selecthlim(struct inpcb *in6p, struct ifnet *ifp)
856{
857
858	if (in6p && in6p->in6p_hops >= 0)
859		return (in6p->in6p_hops);
860	else if (ifp)
861		return (ND_IFINFO(ifp)->chlim);
862	else if (in6p && !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
863		struct route_in6 ro6;
864		struct ifnet *lifp;
865
866		bzero(&ro6, sizeof(ro6));
867		ro6.ro_dst.sin6_family = AF_INET6;
868		ro6.ro_dst.sin6_len = sizeof(struct sockaddr_in6);
869		ro6.ro_dst.sin6_addr = in6p->in6p_faddr;
870		in6_rtalloc(&ro6, in6p ? in6p->inp_inc.inc_fibnum :
871		    RT_DEFAULT_FIB);
872		if (ro6.ro_rt) {
873			lifp = ro6.ro_rt->rt_ifp;
874			RTFREE(ro6.ro_rt);
875			if (lifp)
876				return (ND_IFINFO(lifp)->chlim);
877		} else
878			return (V_ip6_defhlim);
879	}
880	return (V_ip6_defhlim);
881}
882
883/*
884 * XXX: this is borrowed from in6_pcbbind(). If possible, we should
885 * share this function by all *bsd*...
886 */
887int
888in6_pcbsetport(struct in6_addr *laddr, struct inpcb *inp, struct ucred *cred)
889{
890	struct socket *so = inp->inp_socket;
891	u_int16_t lport = 0;
892	int error, lookupflags = 0;
893#ifdef INVARIANTS
894	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
895#endif
896
897	INP_WLOCK_ASSERT(inp);
898	INP_HASH_WLOCK_ASSERT(pcbinfo);
899
900	error = prison_local_ip6(cred, laddr,
901	    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0));
902	if (error)
903		return(error);
904
905	/* XXX: this is redundant when called from in6_pcbbind */
906	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
907		lookupflags = INPLOOKUP_WILDCARD;
908
909	inp->inp_flags |= INP_ANONPORT;
910
911	error = in_pcb_lport(inp, NULL, &lport, cred, lookupflags);
912	if (error != 0)
913		return (error);
914
915	inp->inp_lport = lport;
916	if (in_pcbinshash(inp) != 0) {
917		inp->in6p_laddr = in6addr_any;
918		inp->inp_lport = 0;
919		return (EAGAIN);
920	}
921
922	return (0);
923}
924
925void
926addrsel_policy_init(void)
927{
928
929	init_policy_queue();
930
931	/* initialize the "last resort" policy */
932	bzero(&V_defaultaddrpolicy, sizeof(V_defaultaddrpolicy));
933	V_defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
934
935	if (!IS_DEFAULT_VNET(curvnet))
936		return;
937
938	ADDRSEL_LOCK_INIT();
939	ADDRSEL_SXLOCK_INIT();
940}
941
942static struct in6_addrpolicy *
943lookup_addrsel_policy(struct sockaddr_in6 *key)
944{
945	struct in6_addrpolicy *match = NULL;
946
947	ADDRSEL_LOCK();
948	match = match_addrsel_policy(key);
949
950	if (match == NULL)
951		match = &V_defaultaddrpolicy;
952	else
953		match->use++;
954	ADDRSEL_UNLOCK();
955
956	return (match);
957}
958
959/*
960 * Subroutines to manage the address selection policy table via sysctl.
961 */
962struct walkarg {
963	struct sysctl_req *w_req;
964};
965
966static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
967SYSCTL_DECL(_net_inet6_ip6);
968static SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
969	CTLFLAG_RD, in6_src_sysctl, "");
970
971static int
972in6_src_sysctl(SYSCTL_HANDLER_ARGS)
973{
974	struct walkarg w;
975
976	if (req->newptr)
977		return EPERM;
978
979	bzero(&w, sizeof(w));
980	w.w_req = req;
981
982	return (walk_addrsel_policy(dump_addrsel_policyent, &w));
983}
984
985int
986in6_src_ioctl(u_long cmd, caddr_t data)
987{
988	int i;
989	struct in6_addrpolicy ent0;
990
991	if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
992		return (EOPNOTSUPP); /* check for safety */
993
994	ent0 = *(struct in6_addrpolicy *)data;
995
996	if (ent0.label == ADDR_LABEL_NOTAPP)
997		return (EINVAL);
998	/* check if the prefix mask is consecutive. */
999	if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
1000		return (EINVAL);
1001	/* clear trailing garbages (if any) of the prefix address. */
1002	for (i = 0; i < 4; i++) {
1003		ent0.addr.sin6_addr.s6_addr32[i] &=
1004			ent0.addrmask.sin6_addr.s6_addr32[i];
1005	}
1006	ent0.use = 0;
1007
1008	switch (cmd) {
1009	case SIOCAADDRCTL_POLICY:
1010		return (add_addrsel_policyent(&ent0));
1011	case SIOCDADDRCTL_POLICY:
1012		return (delete_addrsel_policyent(&ent0));
1013	}
1014
1015	return (0);		/* XXX: compromise compilers */
1016}
1017
1018/*
1019 * The followings are implementation of the policy table using a
1020 * simple tail queue.
1021 * XXX such details should be hidden.
1022 * XXX implementation using binary tree should be more efficient.
1023 */
1024struct addrsel_policyent {
1025	TAILQ_ENTRY(addrsel_policyent) ape_entry;
1026	struct in6_addrpolicy ape_policy;
1027};
1028
1029TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
1030
1031static VNET_DEFINE(struct addrsel_policyhead, addrsel_policytab);
1032#define	V_addrsel_policytab		VNET(addrsel_policytab)
1033
1034static void
1035init_policy_queue(void)
1036{
1037
1038	TAILQ_INIT(&V_addrsel_policytab);
1039}
1040
1041static int
1042add_addrsel_policyent(struct in6_addrpolicy *newpolicy)
1043{
1044	struct addrsel_policyent *new, *pol;
1045
1046	new = malloc(sizeof(*new), M_IFADDR,
1047	       M_WAITOK);
1048	ADDRSEL_XLOCK();
1049	ADDRSEL_LOCK();
1050
1051	/* duplication check */
1052	TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1053		if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
1054				       &pol->ape_policy.addr.sin6_addr) &&
1055		    IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
1056				       &pol->ape_policy.addrmask.sin6_addr)) {
1057			ADDRSEL_UNLOCK();
1058			ADDRSEL_XUNLOCK();
1059			free(new, M_IFADDR);
1060			return (EEXIST);	/* or override it? */
1061		}
1062	}
1063
1064	bzero(new, sizeof(*new));
1065
1066	/* XXX: should validate entry */
1067	new->ape_policy = *newpolicy;
1068
1069	TAILQ_INSERT_TAIL(&V_addrsel_policytab, new, ape_entry);
1070	ADDRSEL_UNLOCK();
1071	ADDRSEL_XUNLOCK();
1072
1073	return (0);
1074}
1075
1076static int
1077delete_addrsel_policyent(struct in6_addrpolicy *key)
1078{
1079	struct addrsel_policyent *pol;
1080
1081	ADDRSEL_XLOCK();
1082	ADDRSEL_LOCK();
1083
1084	/* search for the entry in the table */
1085	TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1086		if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
1087		    &pol->ape_policy.addr.sin6_addr) &&
1088		    IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
1089		    &pol->ape_policy.addrmask.sin6_addr)) {
1090			break;
1091		}
1092	}
1093	if (pol == NULL) {
1094		ADDRSEL_UNLOCK();
1095		ADDRSEL_XUNLOCK();
1096		return (ESRCH);
1097	}
1098
1099	TAILQ_REMOVE(&V_addrsel_policytab, pol, ape_entry);
1100	ADDRSEL_UNLOCK();
1101	ADDRSEL_XUNLOCK();
1102
1103	return (0);
1104}
1105
1106static int
1107walk_addrsel_policy(int (*callback)(struct in6_addrpolicy *, void *),
1108    void *w)
1109{
1110	struct addrsel_policyent *pol;
1111	int error = 0;
1112
1113	ADDRSEL_SLOCK();
1114	TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1115		if ((error = (*callback)(&pol->ape_policy, w)) != 0) {
1116			ADDRSEL_SUNLOCK();
1117			return (error);
1118		}
1119	}
1120	ADDRSEL_SUNLOCK();
1121	return (error);
1122}
1123
1124static int
1125dump_addrsel_policyent(struct in6_addrpolicy *pol, void *arg)
1126{
1127	int error = 0;
1128	struct walkarg *w = arg;
1129
1130	error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
1131
1132	return (error);
1133}
1134
1135static struct in6_addrpolicy *
1136match_addrsel_policy(struct sockaddr_in6 *key)
1137{
1138	struct addrsel_policyent *pent;
1139	struct in6_addrpolicy *bestpol = NULL, *pol;
1140	int matchlen, bestmatchlen = -1;
1141	u_char *mp, *ep, *k, *p, m;
1142
1143	TAILQ_FOREACH(pent, &V_addrsel_policytab, ape_entry) {
1144		matchlen = 0;
1145
1146		pol = &pent->ape_policy;
1147		mp = (u_char *)&pol->addrmask.sin6_addr;
1148		ep = mp + 16;	/* XXX: scope field? */
1149		k = (u_char *)&key->sin6_addr;
1150		p = (u_char *)&pol->addr.sin6_addr;
1151		for (; mp < ep && *mp; mp++, k++, p++) {
1152			m = *mp;
1153			if ((*k & m) != *p)
1154				goto next; /* not match */
1155			if (m == 0xff) /* short cut for a typical case */
1156				matchlen += 8;
1157			else {
1158				while (m >= 0x80) {
1159					matchlen++;
1160					m <<= 1;
1161				}
1162			}
1163		}
1164
1165		/* matched.  check if this is better than the current best. */
1166		if (bestpol == NULL ||
1167		    matchlen > bestmatchlen) {
1168			bestpol = pol;
1169			bestmatchlen = matchlen;
1170		}
1171
1172	  next:
1173		continue;
1174	}
1175
1176	return (bestpol);
1177}
1178