in6_src.c revision 196864
1/*-
2 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the project nor the names of its contributors
14 *    may be used to endorse or promote products derived from this software
15 *    without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 *	$KAME: in6_src.c,v 1.132 2003/08/26 04:42:27 keiichi Exp $
30 */
31
32/*-
33 * Copyright (c) 1982, 1986, 1991, 1993
34 *	The Regents of the University of California.  All rights reserved.
35 *
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
38 * are met:
39 * 1. Redistributions of source code must retain the above copyright
40 *    notice, this list of conditions and the following disclaimer.
41 * 2. Redistributions in binary form must reproduce the above copyright
42 *    notice, this list of conditions and the following disclaimer in the
43 *    documentation and/or other materials provided with the distribution.
44 * 4. Neither the name of the University nor the names of its contributors
45 *    may be used to endorse or promote products derived from this software
46 *    without specific prior written permission.
47 *
48 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58 * SUCH DAMAGE.
59 *
60 *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
61 */
62
63#include <sys/cdefs.h>
64__FBSDID("$FreeBSD: head/sys/netinet6/in6_src.c 196864 2009-09-05 16:43:16Z qingli $");
65
66#include "opt_inet.h"
67#include "opt_inet6.h"
68#include "opt_mpath.h"
69
70#include <sys/param.h>
71#include <sys/systm.h>
72#include <sys/lock.h>
73#include <sys/malloc.h>
74#include <sys/mbuf.h>
75#include <sys/priv.h>
76#include <sys/protosw.h>
77#include <sys/socket.h>
78#include <sys/socketvar.h>
79#include <sys/sockio.h>
80#include <sys/sysctl.h>
81#include <sys/errno.h>
82#include <sys/time.h>
83#include <sys/jail.h>
84#include <sys/kernel.h>
85#include <sys/sx.h>
86
87#include <net/if.h>
88#include <net/if_dl.h>
89#include <net/route.h>
90#include <net/if_llatbl.h>
91#ifdef RADIX_MPATH
92#include <net/radix_mpath.h>
93#endif
94
95#include <netinet/in.h>
96#include <netinet/in_var.h>
97#include <netinet/in_systm.h>
98#include <netinet/ip.h>
99#include <netinet/in_pcb.h>
100#include <netinet/ip_var.h>
101#include <netinet/udp.h>
102#include <netinet/udp_var.h>
103
104#include <netinet6/in6_var.h>
105#include <netinet/ip6.h>
106#include <netinet6/in6_pcb.h>
107#include <netinet6/ip6_var.h>
108#include <netinet6/scope6_var.h>
109#include <netinet6/nd6.h>
110
111static struct mtx addrsel_lock;
112#define	ADDRSEL_LOCK_INIT()	mtx_init(&addrsel_lock, "addrsel_lock", NULL, MTX_DEF)
113#define	ADDRSEL_LOCK()		mtx_lock(&addrsel_lock)
114#define	ADDRSEL_UNLOCK()	mtx_unlock(&addrsel_lock)
115#define	ADDRSEL_LOCK_ASSERT()	mtx_assert(&addrsel_lock, MA_OWNED)
116
117static struct sx addrsel_sxlock;
118#define	ADDRSEL_SXLOCK_INIT()	sx_init(&addrsel_sxlock, "addrsel_sxlock")
119#define	ADDRSEL_SLOCK()		sx_slock(&addrsel_sxlock)
120#define	ADDRSEL_SUNLOCK()	sx_sunlock(&addrsel_sxlock)
121#define	ADDRSEL_XLOCK()		sx_xlock(&addrsel_sxlock)
122#define	ADDRSEL_XUNLOCK()	sx_xunlock(&addrsel_sxlock)
123
124#define ADDR_LABEL_NOTAPP (-1)
125
126static VNET_DEFINE(struct in6_addrpolicy, defaultaddrpolicy);
127VNET_DEFINE(int, ip6_prefer_tempaddr);
128
129#define	V_defaultaddrpolicy		VNET(defaultaddrpolicy)
130
131static int selectroute __P((struct sockaddr_in6 *, struct ip6_pktopts *,
132	struct ip6_moptions *, struct route_in6 *, struct ifnet **,
133	struct rtentry **, int));
134static int in6_selectif __P((struct sockaddr_in6 *, struct ip6_pktopts *,
135	struct ip6_moptions *, struct route_in6 *ro, struct ifnet **));
136
137static struct in6_addrpolicy *lookup_addrsel_policy(struct sockaddr_in6 *);
138
139static void init_policy_queue(void);
140static int add_addrsel_policyent(struct in6_addrpolicy *);
141static int delete_addrsel_policyent(struct in6_addrpolicy *);
142static int walk_addrsel_policy __P((int (*)(struct in6_addrpolicy *, void *),
143				    void *));
144static int dump_addrsel_policyent(struct in6_addrpolicy *, void *);
145static struct in6_addrpolicy *match_addrsel_policy(struct sockaddr_in6 *);
146
147/*
148 * Return an IPv6 address, which is the most appropriate for a given
149 * destination and user specified options.
150 * If necessary, this function lookups the routing table and returns
151 * an entry to the caller for later use.
152 */
153#define REPLACE(r) do {\
154	if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
155		sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
156		V_ip6stat.ip6s_sources_rule[(r)]++; \
157	/* { \
158	char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
159	printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
160	} */ \
161	goto replace; \
162} while(0)
163#define NEXT(r) do {\
164	if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
165		sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
166		V_ip6stat.ip6s_sources_rule[(r)]++; \
167	/* { \
168	char ip6buf[INET6_ADDRSTRLEN], ip6b[INET6_ADDRSTRLEN]; \
169	printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(ip6buf, &ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(ip6b, &ia->ia_addr.sin6_addr), (r)); \
170	} */ \
171	goto next;		/* XXX: we can't use 'continue' here */ \
172} while(0)
173#define BREAK(r) do { \
174	if ((r) < sizeof(V_ip6stat.ip6s_sources_rule) / \
175		sizeof(V_ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
176		V_ip6stat.ip6s_sources_rule[(r)]++; \
177	goto out;		/* XXX: we can't use 'break' here */ \
178} while(0)
179
180int
181in6_selectsrc(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
182    struct inpcb *inp, struct route_in6 *ro, struct ucred *cred,
183    struct ifnet **ifpp, struct in6_addr *srcp)
184{
185	struct in6_addr dst;
186	struct ifnet *ifp = NULL;
187	struct in6_ifaddr *ia = NULL, *ia_best = NULL;
188	struct in6_pktinfo *pi = NULL;
189	int dst_scope = -1, best_scope = -1, best_matchlen = -1;
190	struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
191	u_int32_t odstzone;
192	int prefer_tempaddr;
193	int error;
194	struct ip6_moptions *mopts;
195
196	KASSERT(srcp != NULL, ("%s: srcp is NULL", __func__));
197
198	dst = dstsock->sin6_addr; /* make a copy for local operation */
199	if (ifpp)
200		*ifpp = NULL;
201
202	if (inp != NULL) {
203		INP_LOCK_ASSERT(inp);
204		mopts = inp->in6p_moptions;
205	} else {
206		mopts = NULL;
207	}
208
209	/*
210	 * If the source address is explicitly specified by the caller,
211	 * check if the requested source address is indeed a unicast address
212	 * assigned to the node, and can be used as the packet's source
213	 * address.  If everything is okay, use the address as source.
214	 */
215	if (opts && (pi = opts->ip6po_pktinfo) &&
216	    !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
217		struct sockaddr_in6 srcsock;
218		struct in6_ifaddr *ia6;
219
220		/* get the outgoing interface */
221		if ((error = in6_selectif(dstsock, opts, mopts, ro, &ifp)) != 0)
222			return (error);
223
224		/*
225		 * determine the appropriate zone id of the source based on
226		 * the zone of the destination and the outgoing interface.
227		 * If the specified address is ambiguous wrt the scope zone,
228		 * the interface must be specified; otherwise, ifa_ifwithaddr()
229		 * will fail matching the address.
230		 */
231		bzero(&srcsock, sizeof(srcsock));
232		srcsock.sin6_family = AF_INET6;
233		srcsock.sin6_len = sizeof(srcsock);
234		srcsock.sin6_addr = pi->ipi6_addr;
235		if (ifp) {
236			error = in6_setscope(&srcsock.sin6_addr, ifp, NULL);
237			if (error)
238				return (error);
239		}
240		if (cred != NULL && (error = prison_local_ip6(cred,
241		    &srcsock.sin6_addr, (inp != NULL &&
242		    (inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
243			return (error);
244
245		ia6 = (struct in6_ifaddr *)ifa_ifwithaddr(
246		    (struct sockaddr *)&srcsock);
247		if (ia6 == NULL ||
248		    (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY))) {
249			if (ia6 != NULL)
250				ifa_free(&ia6->ia_ifa);
251			return (EADDRNOTAVAIL);
252		}
253		pi->ipi6_addr = srcsock.sin6_addr; /* XXX: this overrides pi */
254		if (ifpp)
255			*ifpp = ifp;
256		bcopy(&ia6->ia_addr.sin6_addr, srcp, sizeof(*srcp));
257		ifa_free(&ia6->ia_ifa);
258		return (0);
259	}
260
261	/*
262	 * Otherwise, if the socket has already bound the source, just use it.
263	 */
264	if (inp != NULL && !IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
265		if (cred != NULL &&
266		    (error = prison_local_ip6(cred, &inp->in6p_laddr,
267		    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0))) != 0)
268			return (error);
269		bcopy(&inp->in6p_laddr, srcp, sizeof(*srcp));
270		return (0);
271	}
272
273	/*
274	 * If the address is not specified, choose the best one based on
275	 * the outgoing interface and the destination address.
276	 */
277	/* get the outgoing interface */
278	if ((error = in6_selectif(dstsock, opts, mopts, ro, &ifp)) != 0)
279		return (error);
280
281#ifdef DIAGNOSTIC
282	if (ifp == NULL)	/* this should not happen */
283		panic("in6_selectsrc: NULL ifp");
284#endif
285	error = in6_setscope(&dst, ifp, &odstzone);
286	if (error)
287		return (error);
288
289	IN6_IFADDR_RLOCK();
290	TAILQ_FOREACH(ia, &V_in6_ifaddrhead, ia_link) {
291		int new_scope = -1, new_matchlen = -1;
292		struct in6_addrpolicy *new_policy = NULL;
293		u_int32_t srczone, osrczone, dstzone;
294		struct in6_addr src;
295		struct ifnet *ifp1 = ia->ia_ifp;
296
297		/*
298		 * We'll never take an address that breaks the scope zone
299		 * of the destination.  We also skip an address if its zone
300		 * does not contain the outgoing interface.
301		 * XXX: we should probably use sin6_scope_id here.
302		 */
303		if (in6_setscope(&dst, ifp1, &dstzone) ||
304		    odstzone != dstzone) {
305			continue;
306		}
307		src = ia->ia_addr.sin6_addr;
308		if (in6_setscope(&src, ifp, &osrczone) ||
309		    in6_setscope(&src, ifp1, &srczone) ||
310		    osrczone != srczone) {
311			continue;
312		}
313
314		/* avoid unusable addresses */
315		if ((ia->ia6_flags &
316		     (IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
317				continue;
318		}
319		if (!V_ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
320			continue;
321
322		if (cred != NULL &&
323		    prison_local_ip6(cred, &ia->ia_addr.sin6_addr,
324			(inp != NULL &&
325			(inp->inp_flags & IN6P_IPV6_V6ONLY) != 0)) != 0)
326			continue;
327
328		/* Rule 1: Prefer same address */
329		if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
330			ia_best = ia;
331			BREAK(1); /* there should be no better candidate */
332		}
333
334		if (ia_best == NULL)
335			REPLACE(0);
336
337		/* Rule 2: Prefer appropriate scope */
338		if (dst_scope < 0)
339			dst_scope = in6_addrscope(&dst);
340		new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
341		if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
342			if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
343				REPLACE(2);
344			NEXT(2);
345		} else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
346			if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
347				NEXT(2);
348			REPLACE(2);
349		}
350
351		/*
352		 * Rule 3: Avoid deprecated addresses.  Note that the case of
353		 * !ip6_use_deprecated is already rejected above.
354		 */
355		if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
356			NEXT(3);
357		if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
358			REPLACE(3);
359
360		/* Rule 4: Prefer home addresses */
361		/*
362		 * XXX: This is a TODO.  We should probably merge the MIP6
363		 * case above.
364		 */
365
366		/* Rule 5: Prefer outgoing interface */
367		if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
368			NEXT(5);
369		if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
370			REPLACE(5);
371
372		/*
373		 * Rule 6: Prefer matching label
374		 * Note that best_policy should be non-NULL here.
375		 */
376		if (dst_policy == NULL)
377			dst_policy = lookup_addrsel_policy(dstsock);
378		if (dst_policy->label != ADDR_LABEL_NOTAPP) {
379			new_policy = lookup_addrsel_policy(&ia->ia_addr);
380			if (dst_policy->label == best_policy->label &&
381			    dst_policy->label != new_policy->label)
382				NEXT(6);
383			if (dst_policy->label != best_policy->label &&
384			    dst_policy->label == new_policy->label)
385				REPLACE(6);
386		}
387
388		/*
389		 * Rule 7: Prefer public addresses.
390		 * We allow users to reverse the logic by configuring
391		 * a sysctl variable, so that privacy conscious users can
392		 * always prefer temporary addresses.
393		 */
394		if (opts == NULL ||
395		    opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
396			prefer_tempaddr = V_ip6_prefer_tempaddr;
397		} else if (opts->ip6po_prefer_tempaddr ==
398		    IP6PO_TEMPADDR_NOTPREFER) {
399			prefer_tempaddr = 0;
400		} else
401			prefer_tempaddr = 1;
402		if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
403		    (ia->ia6_flags & IN6_IFF_TEMPORARY)) {
404			if (prefer_tempaddr)
405				REPLACE(7);
406			else
407				NEXT(7);
408		}
409		if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
410		    !(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
411			if (prefer_tempaddr)
412				NEXT(7);
413			else
414				REPLACE(7);
415		}
416
417		/*
418		 * Rule 8: prefer addresses on alive interfaces.
419		 * This is a KAME specific rule.
420		 */
421		if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
422		    !(ia->ia_ifp->if_flags & IFF_UP))
423			NEXT(8);
424		if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
425		    (ia->ia_ifp->if_flags & IFF_UP))
426			REPLACE(8);
427
428		/*
429		 * Rule 14: Use longest matching prefix.
430		 * Note: in the address selection draft, this rule is
431		 * documented as "Rule 8".  However, since it is also
432		 * documented that this rule can be overridden, we assign
433		 * a large number so that it is easy to assign smaller numbers
434		 * to more preferred rules.
435		 */
436		new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
437		if (best_matchlen < new_matchlen)
438			REPLACE(14);
439		if (new_matchlen < best_matchlen)
440			NEXT(14);
441
442		/* Rule 15 is reserved. */
443
444		/*
445		 * Last resort: just keep the current candidate.
446		 * Or, do we need more rules?
447		 */
448		continue;
449
450	  replace:
451		ia_best = ia;
452		best_scope = (new_scope >= 0 ? new_scope :
453			      in6_addrscope(&ia_best->ia_addr.sin6_addr));
454		best_policy = (new_policy ? new_policy :
455			       lookup_addrsel_policy(&ia_best->ia_addr));
456		best_matchlen = (new_matchlen >= 0 ? new_matchlen :
457				 in6_matchlen(&ia_best->ia_addr.sin6_addr,
458					      &dst));
459
460	  next:
461		continue;
462
463	  out:
464		break;
465	}
466
467	if ((ia = ia_best) == NULL) {
468		IN6_IFADDR_RUNLOCK();
469		return (EADDRNOTAVAIL);
470	}
471
472	if (ifpp)
473		*ifpp = ifp;
474
475	bcopy(&ia->ia_addr.sin6_addr, srcp, sizeof(*srcp));
476	IN6_IFADDR_RUNLOCK();
477	return (0);
478}
479
480/*
481 * clone - meaningful only for bsdi and freebsd
482 */
483static int
484selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
485    struct ip6_moptions *mopts, struct route_in6 *ro,
486    struct ifnet **retifp, struct rtentry **retrt, int norouteok)
487{
488	int error = 0;
489	struct ifnet *ifp = NULL;
490	struct rtentry *rt = NULL;
491	struct sockaddr_in6 *sin6_next;
492	struct in6_pktinfo *pi = NULL;
493	struct in6_addr *dst = &dstsock->sin6_addr;
494#if 0
495	char ip6buf[INET6_ADDRSTRLEN];
496
497	if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
498	    dstsock->sin6_addr.s6_addr32[1] == 0 &&
499	    !IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
500		printf("in6_selectroute: strange destination %s\n",
501		       ip6_sprintf(ip6buf, &dstsock->sin6_addr));
502	} else {
503		printf("in6_selectroute: destination = %s%%%d\n",
504		       ip6_sprintf(ip6buf, &dstsock->sin6_addr),
505		       dstsock->sin6_scope_id); /* for debug */
506	}
507#endif
508
509	/* If the caller specify the outgoing interface explicitly, use it. */
510	if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
511		/* XXX boundary check is assumed to be already done. */
512		ifp = ifnet_byindex(pi->ipi6_ifindex);
513		if (ifp != NULL &&
514		    (norouteok || retrt == NULL ||
515		    IN6_IS_ADDR_MULTICAST(dst))) {
516			/*
517			 * we do not have to check or get the route for
518			 * multicast.
519			 */
520			goto done;
521		} else
522			goto getroute;
523	}
524
525	/*
526	 * If the destination address is a multicast address and the outgoing
527	 * interface for the address is specified by the caller, use it.
528	 */
529	if (IN6_IS_ADDR_MULTICAST(dst) &&
530	    mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
531		goto done; /* we do not need a route for multicast. */
532	}
533
534  getroute:
535	/*
536	 * If the next hop address for the packet is specified by the caller,
537	 * use it as the gateway.
538	 */
539	if (opts && opts->ip6po_nexthop) {
540		struct route_in6 *ron;
541		struct llentry *la;
542
543		sin6_next = satosin6(opts->ip6po_nexthop);
544
545		/* at this moment, we only support AF_INET6 next hops */
546		if (sin6_next->sin6_family != AF_INET6) {
547			error = EAFNOSUPPORT; /* or should we proceed? */
548			goto done;
549		}
550
551		/*
552		 * If the next hop is an IPv6 address, then the node identified
553		 * by that address must be a neighbor of the sending host.
554		 */
555		ron = &opts->ip6po_nextroute;
556		/*
557		 * XXX what do we do here?
558		 * PLZ to be fixing
559		 */
560
561
562		if (ron->ro_rt == NULL) {
563			rtalloc((struct route *)ron); /* multi path case? */
564			if (ron->ro_rt == NULL) {
565				if (ron->ro_rt) {
566					RTFREE(ron->ro_rt);
567					ron->ro_rt = NULL;
568				}
569				error = EHOSTUNREACH;
570				goto done;
571			}
572		}
573
574		rt = ron->ro_rt;
575		ifp = rt->rt_ifp;
576		IF_AFDATA_LOCK(ifp);
577		la = lla_lookup(LLTABLE6(ifp), 0, (struct sockaddr *)&sin6_next->sin6_addr);
578		IF_AFDATA_UNLOCK(ifp);
579		if (la != NULL)
580			LLE_RUNLOCK(la);
581		else {
582			error = EHOSTUNREACH;
583			goto done;
584		}
585#if 0
586		if ((ron->ro_rt &&
587		     (ron->ro_rt->rt_flags & (RTF_UP | RTF_LLINFO)) !=
588		     (RTF_UP | RTF_LLINFO)) ||
589		    !IN6_ARE_ADDR_EQUAL(&satosin6(&ron->ro_dst)->sin6_addr,
590		    &sin6_next->sin6_addr)) {
591			if (ron->ro_rt) {
592				RTFREE(ron->ro_rt);
593				ron->ro_rt = NULL;
594			}
595			*satosin6(&ron->ro_dst) = *sin6_next;
596		}
597		if (ron->ro_rt == NULL) {
598			rtalloc((struct route *)ron); /* multi path case? */
599			if (ron->ro_rt == NULL ||
600			    !(ron->ro_rt->rt_flags & RTF_LLINFO)) {
601				if (ron->ro_rt) {
602					RTFREE(ron->ro_rt);
603					ron->ro_rt = NULL;
604				}
605				error = EHOSTUNREACH;
606				goto done;
607			}
608		}
609#endif
610
611		/*
612		 * When cloning is required, try to allocate a route to the
613		 * destination so that the caller can store path MTU
614		 * information.
615		 */
616		goto done;
617	}
618
619	/*
620	 * Use a cached route if it exists and is valid, else try to allocate
621	 * a new one.  Note that we should check the address family of the
622	 * cached destination, in case of sharing the cache with IPv4.
623	 */
624	if (ro) {
625		if (ro->ro_rt &&
626		    (!(ro->ro_rt->rt_flags & RTF_UP) ||
627		     ((struct sockaddr *)(&ro->ro_dst))->sa_family != AF_INET6 ||
628		     !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
629		     dst))) {
630			RTFREE(ro->ro_rt);
631			ro->ro_rt = (struct rtentry *)NULL;
632		}
633		if (ro->ro_rt == (struct rtentry *)NULL) {
634			struct sockaddr_in6 *sa6;
635
636			/* No route yet, so try to acquire one */
637			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
638			sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
639			*sa6 = *dstsock;
640			sa6->sin6_scope_id = 0;
641
642#ifdef RADIX_MPATH
643				rtalloc_mpath((struct route *)ro,
644				    ntohl(sa6->sin6_addr.s6_addr32[3]));
645#else
646				ro->ro_rt = rtalloc1(&((struct route *)ro)
647				    ->ro_dst, 0, 0UL);
648				if (ro->ro_rt)
649					RT_UNLOCK(ro->ro_rt);
650#endif
651		}
652
653		/*
654		 * do not care about the result if we have the nexthop
655		 * explicitly specified.
656		 */
657		if (opts && opts->ip6po_nexthop)
658			goto done;
659
660		if (ro->ro_rt) {
661			ifp = ro->ro_rt->rt_ifp;
662
663			if (ifp == NULL) { /* can this really happen? */
664				RTFREE(ro->ro_rt);
665				ro->ro_rt = NULL;
666			}
667		}
668		if (ro->ro_rt == NULL)
669			error = EHOSTUNREACH;
670		rt = ro->ro_rt;
671
672		/*
673		 * Check if the outgoing interface conflicts with
674		 * the interface specified by ipi6_ifindex (if specified).
675		 * Note that loopback interface is always okay.
676		 * (this may happen when we are sending a packet to one of
677		 *  our own addresses.)
678		 */
679		if (ifp && opts && opts->ip6po_pktinfo &&
680		    opts->ip6po_pktinfo->ipi6_ifindex) {
681			if (!(ifp->if_flags & IFF_LOOPBACK) &&
682			    ifp->if_index !=
683			    opts->ip6po_pktinfo->ipi6_ifindex) {
684				error = EHOSTUNREACH;
685				goto done;
686			}
687		}
688	}
689
690  done:
691	if (ifp == NULL && rt == NULL) {
692		/*
693		 * This can happen if the caller did not pass a cached route
694		 * nor any other hints.  We treat this case an error.
695		 */
696		error = EHOSTUNREACH;
697	}
698	if (error == EHOSTUNREACH)
699		V_ip6stat.ip6s_noroute++;
700
701	if (retifp != NULL) {
702		*retifp = ifp;
703
704		/*
705		 * Adjust the "outgoing" interface.  If we're going to loop
706		 * the packet back to ourselves, the ifp would be the loopback
707		 * interface. However, we'd rather know the interface associated
708		 * to the destination address (which should probably be one of
709		 * our own addresses.)
710		 */
711		if (rt) {
712			if ((rt->rt_ifp->if_flags & IFF_LOOPBACK) &&
713			    (rt->rt_gateway->sa_family == AF_LINK))
714				*retifp =
715					ifnet_byindex(((struct sockaddr_dl *)
716						       rt->rt_gateway)->sdl_index);
717		}
718	}
719
720	if (retrt != NULL)
721		*retrt = rt;	/* rt may be NULL */
722
723	return (error);
724}
725
726static int
727in6_selectif(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
728    struct ip6_moptions *mopts, struct route_in6 *ro, struct ifnet **retifp)
729{
730	int error;
731	struct route_in6 sro;
732	struct rtentry *rt = NULL;
733
734	if (ro == NULL) {
735		bzero(&sro, sizeof(sro));
736		ro = &sro;
737	}
738
739	if ((error = selectroute(dstsock, opts, mopts, ro, retifp,
740				     &rt, 1)) != 0) {
741		if (ro == &sro && rt && rt == sro.ro_rt)
742			RTFREE(rt);
743		return (error);
744	}
745
746	/*
747	 * do not use a rejected or black hole route.
748	 * XXX: this check should be done in the L2 output routine.
749	 * However, if we skipped this check here, we'd see the following
750	 * scenario:
751	 * - install a rejected route for a scoped address prefix
752	 *   (like fe80::/10)
753	 * - send a packet to a destination that matches the scoped prefix,
754	 *   with ambiguity about the scope zone.
755	 * - pick the outgoing interface from the route, and disambiguate the
756	 *   scope zone with the interface.
757	 * - ip6_output() would try to get another route with the "new"
758	 *   destination, which may be valid.
759	 * - we'd see no error on output.
760	 * Although this may not be very harmful, it should still be confusing.
761	 * We thus reject the case here.
762	 */
763	if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE))) {
764		int flags = (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
765
766		if (ro == &sro && rt && rt == sro.ro_rt)
767			RTFREE(rt);
768		return (flags);
769	}
770
771	if (ro == &sro && rt && rt == sro.ro_rt)
772		RTFREE(rt);
773	return (0);
774}
775
776/*
777 * clone - meaningful only for bsdi and freebsd
778 */
779int
780in6_selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
781    struct ip6_moptions *mopts, struct route_in6 *ro,
782    struct ifnet **retifp, struct rtentry **retrt)
783{
784
785	return (selectroute(dstsock, opts, mopts, ro, retifp,
786	    retrt, 0));
787}
788
789/*
790 * Default hop limit selection. The precedence is as follows:
791 * 1. Hoplimit value specified via ioctl.
792 * 2. (If the outgoing interface is detected) the current
793 *     hop limit of the interface specified by router advertisement.
794 * 3. The system default hoplimit.
795 */
796int
797in6_selecthlim(struct inpcb *in6p, struct ifnet *ifp)
798{
799
800	if (in6p && in6p->in6p_hops >= 0)
801		return (in6p->in6p_hops);
802	else if (ifp)
803		return (ND_IFINFO(ifp)->chlim);
804	else if (in6p && !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
805		struct route_in6 ro6;
806		struct ifnet *lifp;
807
808		bzero(&ro6, sizeof(ro6));
809		ro6.ro_dst.sin6_family = AF_INET6;
810		ro6.ro_dst.sin6_len = sizeof(struct sockaddr_in6);
811		ro6.ro_dst.sin6_addr = in6p->in6p_faddr;
812		rtalloc((struct route *)&ro6);
813		if (ro6.ro_rt) {
814			lifp = ro6.ro_rt->rt_ifp;
815			RTFREE(ro6.ro_rt);
816			if (lifp)
817				return (ND_IFINFO(lifp)->chlim);
818		} else
819			return (V_ip6_defhlim);
820	}
821	return (V_ip6_defhlim);
822}
823
824/*
825 * XXX: this is borrowed from in6_pcbbind(). If possible, we should
826 * share this function by all *bsd*...
827 */
828int
829in6_pcbsetport(struct in6_addr *laddr, struct inpcb *inp, struct ucred *cred)
830{
831	struct socket *so = inp->inp_socket;
832	u_int16_t lport = 0, first, last, *lastport;
833	int count, error, wild = 0, dorandom;
834	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
835
836	INP_INFO_WLOCK_ASSERT(pcbinfo);
837	INP_WLOCK_ASSERT(inp);
838
839	error = prison_local_ip6(cred, laddr,
840	    ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0));
841	if (error)
842		return(error);
843
844	/* XXX: this is redundant when called from in6_pcbbind */
845	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
846		wild = INPLOOKUP_WILDCARD;
847
848	inp->inp_flags |= INP_ANONPORT;
849
850	if (inp->inp_flags & INP_HIGHPORT) {
851		first = V_ipport_hifirstauto;	/* sysctl */
852		last  = V_ipport_hilastauto;
853		lastport = &pcbinfo->ipi_lasthi;
854	} else if (inp->inp_flags & INP_LOWPORT) {
855		error = priv_check_cred(cred, PRIV_NETINET_RESERVEDPORT, 0);
856		if (error)
857			return error;
858		first = V_ipport_lowfirstauto;	/* 1023 */
859		last  = V_ipport_lowlastauto;	/* 600 */
860		lastport = &pcbinfo->ipi_lastlow;
861	} else {
862		first = V_ipport_firstauto;	/* sysctl */
863		last  = V_ipport_lastauto;
864		lastport = &pcbinfo->ipi_lastport;
865	}
866
867	/*
868	 * For UDP, use random port allocation as long as the user
869	 * allows it.  For TCP (and as of yet unknown) connections,
870	 * use random port allocation only if the user allows it AND
871	 * ipport_tick() allows it.
872	 */
873	if (V_ipport_randomized &&
874	    (!V_ipport_stoprandom || pcbinfo == &V_udbinfo))
875		dorandom = 1;
876	else
877		dorandom = 0;
878	/*
879	 * It makes no sense to do random port allocation if
880	 * we have the only port available.
881	 */
882	if (first == last)
883		dorandom = 0;
884	/* Make sure to not include UDP packets in the count. */
885	if (pcbinfo != &V_udbinfo)
886		V_ipport_tcpallocs++;
887
888	/*
889	 * Instead of having two loops further down counting up or down
890	 * make sure that first is always <= last and go with only one
891	 * code path implementing all logic.
892	 */
893	if (first > last) {
894		u_int16_t aux;
895
896		aux = first;
897		first = last;
898		last = aux;
899	}
900
901	if (dorandom)
902		*lastport = first + (arc4random() % (last - first));
903
904	count = last - first;
905
906	do {
907		if (count-- < 0) {	/* completely used? */
908			/* Undo an address bind that may have occurred. */
909			inp->in6p_laddr = in6addr_any;
910			return (EADDRNOTAVAIL);
911		}
912		++*lastport;
913		if (*lastport < first || *lastport > last)
914			*lastport = first;
915		lport = htons(*lastport);
916	} while (in6_pcblookup_local(pcbinfo, &inp->in6p_laddr,
917	    lport, wild, cred));
918
919	inp->inp_lport = lport;
920	if (in_pcbinshash(inp) != 0) {
921		inp->in6p_laddr = in6addr_any;
922		inp->inp_lport = 0;
923		return (EAGAIN);
924	}
925
926	return (0);
927}
928
929void
930addrsel_policy_init(void)
931{
932
933	V_ip6_prefer_tempaddr = 0;
934
935	init_policy_queue();
936
937	/* initialize the "last resort" policy */
938	bzero(&V_defaultaddrpolicy, sizeof(V_defaultaddrpolicy));
939	V_defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
940
941	if (!IS_DEFAULT_VNET(curvnet))
942		return;
943
944	ADDRSEL_LOCK_INIT();
945	ADDRSEL_SXLOCK_INIT();
946}
947
948static struct in6_addrpolicy *
949lookup_addrsel_policy(struct sockaddr_in6 *key)
950{
951	struct in6_addrpolicy *match = NULL;
952
953	ADDRSEL_LOCK();
954	match = match_addrsel_policy(key);
955
956	if (match == NULL)
957		match = &V_defaultaddrpolicy;
958	else
959		match->use++;
960	ADDRSEL_UNLOCK();
961
962	return (match);
963}
964
965/*
966 * Subroutines to manage the address selection policy table via sysctl.
967 */
968struct walkarg {
969	struct sysctl_req *w_req;
970};
971
972static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
973SYSCTL_DECL(_net_inet6_ip6);
974SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
975	CTLFLAG_RD, in6_src_sysctl, "");
976
977static int
978in6_src_sysctl(SYSCTL_HANDLER_ARGS)
979{
980	struct walkarg w;
981
982	if (req->newptr)
983		return EPERM;
984
985	bzero(&w, sizeof(w));
986	w.w_req = req;
987
988	return (walk_addrsel_policy(dump_addrsel_policyent, &w));
989}
990
991int
992in6_src_ioctl(u_long cmd, caddr_t data)
993{
994	int i;
995	struct in6_addrpolicy ent0;
996
997	if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
998		return (EOPNOTSUPP); /* check for safety */
999
1000	ent0 = *(struct in6_addrpolicy *)data;
1001
1002	if (ent0.label == ADDR_LABEL_NOTAPP)
1003		return (EINVAL);
1004	/* check if the prefix mask is consecutive. */
1005	if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
1006		return (EINVAL);
1007	/* clear trailing garbages (if any) of the prefix address. */
1008	for (i = 0; i < 4; i++) {
1009		ent0.addr.sin6_addr.s6_addr32[i] &=
1010			ent0.addrmask.sin6_addr.s6_addr32[i];
1011	}
1012	ent0.use = 0;
1013
1014	switch (cmd) {
1015	case SIOCAADDRCTL_POLICY:
1016		return (add_addrsel_policyent(&ent0));
1017	case SIOCDADDRCTL_POLICY:
1018		return (delete_addrsel_policyent(&ent0));
1019	}
1020
1021	return (0);		/* XXX: compromise compilers */
1022}
1023
1024/*
1025 * The followings are implementation of the policy table using a
1026 * simple tail queue.
1027 * XXX such details should be hidden.
1028 * XXX implementation using binary tree should be more efficient.
1029 */
1030struct addrsel_policyent {
1031	TAILQ_ENTRY(addrsel_policyent) ape_entry;
1032	struct in6_addrpolicy ape_policy;
1033};
1034
1035TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
1036
1037static VNET_DEFINE(struct addrsel_policyhead, addrsel_policytab);
1038#define	V_addrsel_policytab		VNET(addrsel_policytab)
1039
1040static void
1041init_policy_queue(void)
1042{
1043
1044	TAILQ_INIT(&V_addrsel_policytab);
1045}
1046
1047static int
1048add_addrsel_policyent(struct in6_addrpolicy *newpolicy)
1049{
1050	struct addrsel_policyent *new, *pol;
1051
1052	new = malloc(sizeof(*new), M_IFADDR,
1053	       M_WAITOK);
1054	ADDRSEL_XLOCK();
1055	ADDRSEL_LOCK();
1056
1057	/* duplication check */
1058	TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1059		if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
1060				       &pol->ape_policy.addr.sin6_addr) &&
1061		    IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
1062				       &pol->ape_policy.addrmask.sin6_addr)) {
1063			ADDRSEL_UNLOCK();
1064			ADDRSEL_XUNLOCK();
1065			free(new, M_IFADDR);
1066			return (EEXIST);	/* or override it? */
1067		}
1068	}
1069
1070	bzero(new, sizeof(*new));
1071
1072	/* XXX: should validate entry */
1073	new->ape_policy = *newpolicy;
1074
1075	TAILQ_INSERT_TAIL(&V_addrsel_policytab, new, ape_entry);
1076	ADDRSEL_UNLOCK();
1077	ADDRSEL_XUNLOCK();
1078
1079	return (0);
1080}
1081
1082static int
1083delete_addrsel_policyent(struct in6_addrpolicy *key)
1084{
1085	struct addrsel_policyent *pol;
1086
1087	ADDRSEL_XLOCK();
1088	ADDRSEL_LOCK();
1089
1090	/* search for the entry in the table */
1091	TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1092		if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
1093		    &pol->ape_policy.addr.sin6_addr) &&
1094		    IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
1095		    &pol->ape_policy.addrmask.sin6_addr)) {
1096			break;
1097		}
1098	}
1099	if (pol == NULL) {
1100		ADDRSEL_UNLOCK();
1101		ADDRSEL_XUNLOCK();
1102		return (ESRCH);
1103	}
1104
1105	TAILQ_REMOVE(&V_addrsel_policytab, pol, ape_entry);
1106	ADDRSEL_UNLOCK();
1107	ADDRSEL_XUNLOCK();
1108
1109	return (0);
1110}
1111
1112static int
1113walk_addrsel_policy(int (*callback)(struct in6_addrpolicy *, void *),
1114    void *w)
1115{
1116	struct addrsel_policyent *pol;
1117	int error = 0;
1118
1119	ADDRSEL_SLOCK();
1120	TAILQ_FOREACH(pol, &V_addrsel_policytab, ape_entry) {
1121		if ((error = (*callback)(&pol->ape_policy, w)) != 0) {
1122			ADDRSEL_SUNLOCK();
1123			return (error);
1124		}
1125	}
1126	ADDRSEL_SUNLOCK();
1127	return (error);
1128}
1129
1130static int
1131dump_addrsel_policyent(struct in6_addrpolicy *pol, void *arg)
1132{
1133	int error = 0;
1134	struct walkarg *w = arg;
1135
1136	error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
1137
1138	return (error);
1139}
1140
1141static struct in6_addrpolicy *
1142match_addrsel_policy(struct sockaddr_in6 *key)
1143{
1144	struct addrsel_policyent *pent;
1145	struct in6_addrpolicy *bestpol = NULL, *pol;
1146	int matchlen, bestmatchlen = -1;
1147	u_char *mp, *ep, *k, *p, m;
1148
1149	TAILQ_FOREACH(pent, &V_addrsel_policytab, ape_entry) {
1150		matchlen = 0;
1151
1152		pol = &pent->ape_policy;
1153		mp = (u_char *)&pol->addrmask.sin6_addr;
1154		ep = mp + 16;	/* XXX: scope field? */
1155		k = (u_char *)&key->sin6_addr;
1156		p = (u_char *)&pol->addr.sin6_addr;
1157		for (; mp < ep && *mp; mp++, k++, p++) {
1158			m = *mp;
1159			if ((*k & m) != *p)
1160				goto next; /* not match */
1161			if (m == 0xff) /* short cut for a typical case */
1162				matchlen += 8;
1163			else {
1164				while (m >= 0x80) {
1165					matchlen++;
1166					m <<= 1;
1167				}
1168			}
1169		}
1170
1171		/* matched.  check if this is better than the current best. */
1172		if (bestpol == NULL ||
1173		    matchlen > bestmatchlen) {
1174			bestpol = pol;
1175			bestmatchlen = matchlen;
1176		}
1177
1178	  next:
1179		continue;
1180	}
1181
1182	return (bestpol);
1183}
1184