in6_src.c revision 168191
1/*	$FreeBSD: head/sys/netinet6/in6_src.c 168191 2007-03-31 23:23:42Z jhb $	*/
2/*	$KAME: in6_src.c,v 1.132 2003/08/26 04:42:27 keiichi Exp $	*/
3
4/*-
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 *    notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 *    notice, this list of conditions and the following disclaimer in the
15 *    documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 *    may be used to endorse or promote products derived from this software
18 *    without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 */
32
33/*-
34 * Copyright (c) 1982, 1986, 1991, 1993
35 *	The Regents of the University of California.  All rights reserved.
36 *
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
39 * are met:
40 * 1. Redistributions of source code must retain the above copyright
41 *    notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 *    notice, this list of conditions and the following disclaimer in the
44 *    documentation and/or other materials provided with the distribution.
45 * 4. Neither the name of the University nor the names of its contributors
46 *    may be used to endorse or promote products derived from this software
47 *    without specific prior written permission.
48 *
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59 * SUCH DAMAGE.
60 *
61 *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
62 */
63
64#include "opt_inet.h"
65#include "opt_inet6.h"
66
67#include <sys/param.h>
68#include <sys/systm.h>
69#include <sys/lock.h>
70#include <sys/malloc.h>
71#include <sys/mbuf.h>
72#include <sys/priv.h>
73#include <sys/protosw.h>
74#include <sys/socket.h>
75#include <sys/socketvar.h>
76#include <sys/sockio.h>
77#include <sys/sysctl.h>
78#include <sys/errno.h>
79#include <sys/time.h>
80#include <sys/kernel.h>
81#include <sys/sx.h>
82
83#include <net/if.h>
84#include <net/route.h>
85
86#include <netinet/in.h>
87#include <netinet/in_var.h>
88#include <netinet/in_systm.h>
89#include <netinet/ip.h>
90#include <netinet/in_pcb.h>
91#include <netinet6/in6_var.h>
92#include <netinet/ip6.h>
93#include <netinet6/in6_pcb.h>
94#include <netinet6/ip6_var.h>
95#include <netinet6/scope6_var.h>
96#include <netinet6/nd6.h>
97
98static struct mtx addrsel_lock;
99#define	ADDRSEL_LOCK_INIT()	mtx_init(&addrsel_lock, "addrsel_lock", NULL, MTX_DEF)
100#define	ADDRSEL_LOCK()		mtx_lock(&addrsel_lock)
101#define	ADDRSEL_UNLOCK()	mtx_unlock(&addrsel_lock)
102#define	ADDRSEL_LOCK_ASSERT()	mtx_assert(&addrsel_lock, MA_OWNED)
103
104static struct sx addrsel_sxlock;
105#define	ADDRSEL_SXLOCK_INIT()	sx_init(&addrsel_sxlock, "addrsel_sxlock")
106#define	ADDRSEL_SLOCK()		sx_slock(&addrsel_sxlock)
107#define	ADDRSEL_SUNLOCK()	sx_sunlock(&addrsel_sxlock)
108#define	ADDRSEL_XLOCK()		sx_xlock(&addrsel_sxlock)
109#define	ADDRSEL_XUNLOCK()	sx_xunlock(&addrsel_sxlock)
110
111#define ADDR_LABEL_NOTAPP (-1)
112struct in6_addrpolicy defaultaddrpolicy;
113
114int ip6_prefer_tempaddr = 0;
115
116static int selectroute __P((struct sockaddr_in6 *, struct ip6_pktopts *,
117	struct ip6_moptions *, struct route_in6 *, struct ifnet **,
118	struct rtentry **, int, int));
119static int in6_selectif __P((struct sockaddr_in6 *, struct ip6_pktopts *,
120	struct ip6_moptions *, struct route_in6 *ro, struct ifnet **));
121
122static struct in6_addrpolicy *lookup_addrsel_policy __P((struct sockaddr_in6 *));
123
124static void init_policy_queue __P((void));
125static int add_addrsel_policyent __P((struct in6_addrpolicy *));
126static int delete_addrsel_policyent __P((struct in6_addrpolicy *));
127static int walk_addrsel_policy __P((int (*)(struct in6_addrpolicy *, void *),
128				    void *));
129static int dump_addrsel_policyent __P((struct in6_addrpolicy *, void *));
130static struct in6_addrpolicy *match_addrsel_policy __P((struct sockaddr_in6 *));
131
132/*
133 * Return an IPv6 address, which is the most appropriate for a given
134 * destination and user specified options.
135 * If necessary, this function lookups the routing table and returns
136 * an entry to the caller for later use.
137 */
138#define REPLACE(r) do {\
139	if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
140		sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
141		ip6stat.ip6s_sources_rule[(r)]++; \
142	/* printf("in6_selectsrc: replace %s with %s by %d\n", ia_best ? ip6_sprintf(&ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(&ia->ia_addr.sin6_addr), (r)); */ \
143	goto replace; \
144} while(0)
145#define NEXT(r) do {\
146	if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
147		sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
148		ip6stat.ip6s_sources_rule[(r)]++; \
149	/* printf("in6_selectsrc: keep %s against %s by %d\n", ia_best ? ip6_sprintf(&ia_best->ia_addr.sin6_addr) : "none", ip6_sprintf(&ia->ia_addr.sin6_addr), (r)); */ \
150	goto next; 		/* XXX: we can't use 'continue' here */ \
151} while(0)
152#define BREAK(r) do { \
153	if ((r) < sizeof(ip6stat.ip6s_sources_rule) / \
154		sizeof(ip6stat.ip6s_sources_rule[0])) /* check for safety */ \
155		ip6stat.ip6s_sources_rule[(r)]++; \
156	goto out; 		/* XXX: we can't use 'break' here */ \
157} while(0)
158
159struct in6_addr *
160in6_selectsrc(dstsock, opts, mopts, ro, laddr, ifpp, errorp)
161	struct sockaddr_in6 *dstsock;
162	struct ip6_pktopts *opts;
163	struct ip6_moptions *mopts;
164	struct route_in6 *ro;
165	struct in6_addr *laddr;
166	struct ifnet **ifpp;
167	int *errorp;
168{
169	struct in6_addr dst;
170	struct ifnet *ifp = NULL;
171	struct in6_ifaddr *ia = NULL, *ia_best = NULL;
172	struct in6_pktinfo *pi = NULL;
173	int dst_scope = -1, best_scope = -1, best_matchlen = -1;
174	struct in6_addrpolicy *dst_policy = NULL, *best_policy = NULL;
175	u_int32_t odstzone;
176	int prefer_tempaddr;
177
178	dst = dstsock->sin6_addr; /* make a copy for local operation */
179	*errorp = 0;
180	if (ifpp)
181		*ifpp = NULL;
182
183	/*
184	 * If the source address is explicitly specified by the caller,
185	 * check if the requested source address is indeed a unicast address
186	 * assigned to the node, and can be used as the packet's source
187	 * address.  If everything is okay, use the address as source.
188	 */
189	if (opts && (pi = opts->ip6po_pktinfo) &&
190	    !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
191		struct sockaddr_in6 srcsock;
192		struct in6_ifaddr *ia6;
193
194		/* get the outgoing interface */
195		if ((*errorp = in6_selectif(dstsock, opts, mopts, ro, &ifp))
196		    != 0) {
197			return (NULL);
198		}
199
200		/*
201		 * determine the appropriate zone id of the source based on
202		 * the zone of the destination and the outgoing interface.
203		 * If the specified address is ambiguous wrt the scope zone,
204		 * the interface must be specified; otherwise, ifa_ifwithaddr()
205		 * will fail matching the address.
206		 */
207		bzero(&srcsock, sizeof(srcsock));
208		srcsock.sin6_family = AF_INET6;
209		srcsock.sin6_len = sizeof(srcsock);
210		srcsock.sin6_addr = pi->ipi6_addr;
211		if (ifp) {
212			*errorp = in6_setscope(&srcsock.sin6_addr, ifp, NULL);
213			if (*errorp != 0)
214				return (NULL);
215		}
216
217		ia6 = (struct in6_ifaddr *)ifa_ifwithaddr((struct sockaddr *)(&srcsock));
218		if (ia6 == NULL ||
219		    (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY))) {
220			*errorp = EADDRNOTAVAIL;
221			return (NULL);
222		}
223		pi->ipi6_addr = srcsock.sin6_addr; /* XXX: this overrides pi */
224		if (ifpp)
225			*ifpp = ifp;
226		return (&ia6->ia_addr.sin6_addr);
227	}
228
229	/*
230	 * Otherwise, if the socket has already bound the source, just use it.
231	 */
232	if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr))
233		return (laddr);
234
235	/*
236	 * If the address is not specified, choose the best one based on
237	 * the outgoing interface and the destination address.
238	 */
239	/* get the outgoing interface */
240	if ((*errorp = in6_selectif(dstsock, opts, mopts, ro, &ifp)) != 0)
241		return (NULL);
242
243#ifdef DIAGNOSTIC
244	if (ifp == NULL)	/* this should not happen */
245		panic("in6_selectsrc: NULL ifp");
246#endif
247	*errorp = in6_setscope(&dst, ifp, &odstzone);
248	if (*errorp != 0)
249		return (NULL);
250
251	for (ia = in6_ifaddr; ia; ia = ia->ia_next) {
252		int new_scope = -1, new_matchlen = -1;
253		struct in6_addrpolicy *new_policy = NULL;
254		u_int32_t srczone, osrczone, dstzone;
255		struct in6_addr src;
256		struct ifnet *ifp1 = ia->ia_ifp;
257
258		/*
259		 * We'll never take an address that breaks the scope zone
260		 * of the destination.  We also skip an address if its zone
261		 * does not contain the outgoing interface.
262		 * XXX: we should probably use sin6_scope_id here.
263		 */
264		if (in6_setscope(&dst, ifp1, &dstzone) ||
265		    odstzone != dstzone) {
266			continue;
267		}
268		src = ia->ia_addr.sin6_addr;
269		if (in6_setscope(&src, ifp, &osrczone) ||
270		    in6_setscope(&src, ifp1, &srczone) ||
271		    osrczone != srczone) {
272			continue;
273		}
274
275		/* avoid unusable addresses */
276		if ((ia->ia6_flags &
277		     (IN6_IFF_NOTREADY | IN6_IFF_ANYCAST | IN6_IFF_DETACHED))) {
278				continue;
279		}
280		if (!ip6_use_deprecated && IFA6_IS_DEPRECATED(ia))
281			continue;
282
283		/* Rule 1: Prefer same address */
284		if (IN6_ARE_ADDR_EQUAL(&dst, &ia->ia_addr.sin6_addr)) {
285			ia_best = ia;
286			BREAK(1); /* there should be no better candidate */
287		}
288
289		if (ia_best == NULL)
290			REPLACE(0);
291
292		/* Rule 2: Prefer appropriate scope */
293		if (dst_scope < 0)
294			dst_scope = in6_addrscope(&dst);
295		new_scope = in6_addrscope(&ia->ia_addr.sin6_addr);
296		if (IN6_ARE_SCOPE_CMP(best_scope, new_scope) < 0) {
297			if (IN6_ARE_SCOPE_CMP(best_scope, dst_scope) < 0)
298				REPLACE(2);
299			NEXT(2);
300		} else if (IN6_ARE_SCOPE_CMP(new_scope, best_scope) < 0) {
301			if (IN6_ARE_SCOPE_CMP(new_scope, dst_scope) < 0)
302				NEXT(2);
303			REPLACE(2);
304		}
305
306		/*
307		 * Rule 3: Avoid deprecated addresses.  Note that the case of
308		 * !ip6_use_deprecated is already rejected above.
309		 */
310		if (!IFA6_IS_DEPRECATED(ia_best) && IFA6_IS_DEPRECATED(ia))
311			NEXT(3);
312		if (IFA6_IS_DEPRECATED(ia_best) && !IFA6_IS_DEPRECATED(ia))
313			REPLACE(3);
314
315		/* Rule 4: Prefer home addresses */
316		/*
317		 * XXX: This is a TODO.  We should probably merge the MIP6
318		 * case above.
319		 */
320
321		/* Rule 5: Prefer outgoing interface */
322		if (ia_best->ia_ifp == ifp && ia->ia_ifp != ifp)
323			NEXT(5);
324		if (ia_best->ia_ifp != ifp && ia->ia_ifp == ifp)
325			REPLACE(5);
326
327		/*
328		 * Rule 6: Prefer matching label
329		 * Note that best_policy should be non-NULL here.
330		 */
331		if (dst_policy == NULL)
332			dst_policy = lookup_addrsel_policy(dstsock);
333		if (dst_policy->label != ADDR_LABEL_NOTAPP) {
334			new_policy = lookup_addrsel_policy(&ia->ia_addr);
335			if (dst_policy->label == best_policy->label &&
336			    dst_policy->label != new_policy->label)
337				NEXT(6);
338			if (dst_policy->label != best_policy->label &&
339			    dst_policy->label == new_policy->label)
340				REPLACE(6);
341		}
342
343		/*
344		 * Rule 7: Prefer public addresses.
345		 * We allow users to reverse the logic by configuring
346		 * a sysctl variable, so that privacy conscious users can
347		 * always prefer temporary addresses.
348		 */
349		if (opts == NULL ||
350		    opts->ip6po_prefer_tempaddr == IP6PO_TEMPADDR_SYSTEM) {
351			prefer_tempaddr = ip6_prefer_tempaddr;
352		} else if (opts->ip6po_prefer_tempaddr ==
353		    IP6PO_TEMPADDR_NOTPREFER) {
354			prefer_tempaddr = 0;
355		} else
356			prefer_tempaddr = 1;
357		if (!(ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
358		    (ia->ia6_flags & IN6_IFF_TEMPORARY)) {
359			if (prefer_tempaddr)
360				REPLACE(7);
361			else
362				NEXT(7);
363		}
364		if ((ia_best->ia6_flags & IN6_IFF_TEMPORARY) &&
365		    !(ia->ia6_flags & IN6_IFF_TEMPORARY)) {
366			if (prefer_tempaddr)
367				NEXT(7);
368			else
369				REPLACE(7);
370		}
371
372		/*
373		 * Rule 8: prefer addresses on alive interfaces.
374		 * This is a KAME specific rule.
375		 */
376		if ((ia_best->ia_ifp->if_flags & IFF_UP) &&
377		    !(ia->ia_ifp->if_flags & IFF_UP))
378			NEXT(8);
379		if (!(ia_best->ia_ifp->if_flags & IFF_UP) &&
380		    (ia->ia_ifp->if_flags & IFF_UP))
381			REPLACE(8);
382
383		/*
384		 * Rule 14: Use longest matching prefix.
385		 * Note: in the address selection draft, this rule is
386		 * documented as "Rule 8".  However, since it is also
387		 * documented that this rule can be overridden, we assign
388		 * a large number so that it is easy to assign smaller numbers
389		 * to more preferred rules.
390		 */
391		new_matchlen = in6_matchlen(&ia->ia_addr.sin6_addr, &dst);
392		if (best_matchlen < new_matchlen)
393			REPLACE(14);
394		if (new_matchlen < best_matchlen)
395			NEXT(14);
396
397		/* Rule 15 is reserved. */
398
399		/*
400		 * Last resort: just keep the current candidate.
401		 * Or, do we need more rules?
402		 */
403		continue;
404
405	  replace:
406		ia_best = ia;
407		best_scope = (new_scope >= 0 ? new_scope :
408			      in6_addrscope(&ia_best->ia_addr.sin6_addr));
409		best_policy = (new_policy ? new_policy :
410			       lookup_addrsel_policy(&ia_best->ia_addr));
411		best_matchlen = (new_matchlen >= 0 ? new_matchlen :
412				 in6_matchlen(&ia_best->ia_addr.sin6_addr,
413					      &dst));
414
415	  next:
416		continue;
417
418	  out:
419		break;
420	}
421
422	if ((ia = ia_best) == NULL) {
423		*errorp = EADDRNOTAVAIL;
424		return (NULL);
425	}
426
427	if (ifpp)
428		*ifpp = ifp;
429
430	return (&ia->ia_addr.sin6_addr);
431}
432
433static int
434selectroute(dstsock, opts, mopts, ro, retifp, retrt, clone, norouteok)
435	struct sockaddr_in6 *dstsock;
436	struct ip6_pktopts *opts;
437	struct ip6_moptions *mopts;
438	struct route_in6 *ro;
439	struct ifnet **retifp;
440	struct rtentry **retrt;
441	int clone;		/* meaningful only for bsdi and freebsd. */
442	int norouteok;
443{
444	int error = 0;
445	struct ifnet *ifp = NULL;
446	struct rtentry *rt = NULL;
447	struct sockaddr_in6 *sin6_next;
448	struct in6_pktinfo *pi = NULL;
449	struct in6_addr *dst = &dstsock->sin6_addr;
450#if 0
451	char ip6buf[INET6_ADDRSTRLEN];
452
453	if (dstsock->sin6_addr.s6_addr32[0] == 0 &&
454	    dstsock->sin6_addr.s6_addr32[1] == 0 &&
455	    !IN6_IS_ADDR_LOOPBACK(&dstsock->sin6_addr)) {
456		printf("in6_selectroute: strange destination %s\n",
457		       ip6_sprintf(ip6buf, &dstsock->sin6_addr));
458	} else {
459		printf("in6_selectroute: destination = %s%%%d\n",
460		       ip6_sprintf(ip6buf, &dstsock->sin6_addr),
461		       dstsock->sin6_scope_id); /* for debug */
462	}
463#endif
464
465	/* If the caller specify the outgoing interface explicitly, use it. */
466	if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
467		/* XXX boundary check is assumed to be already done. */
468		ifp = ifnet_byindex(pi->ipi6_ifindex);
469		if (ifp != NULL &&
470		    (norouteok || retrt == NULL ||
471		    IN6_IS_ADDR_MULTICAST(dst))) {
472			/*
473			 * we do not have to check or get the route for
474			 * multicast.
475			 */
476			goto done;
477		} else
478			goto getroute;
479	}
480
481	/*
482	 * If the destination address is a multicast address and the outgoing
483	 * interface for the address is specified by the caller, use it.
484	 */
485	if (IN6_IS_ADDR_MULTICAST(dst) &&
486	    mopts != NULL && (ifp = mopts->im6o_multicast_ifp) != NULL) {
487		goto done; /* we do not need a route for multicast. */
488	}
489
490  getroute:
491	/*
492	 * If the next hop address for the packet is specified by the caller,
493	 * use it as the gateway.
494	 */
495	if (opts && opts->ip6po_nexthop) {
496		struct route_in6 *ron;
497
498		sin6_next = satosin6(opts->ip6po_nexthop);
499
500		/* at this moment, we only support AF_INET6 next hops */
501		if (sin6_next->sin6_family != AF_INET6) {
502			error = EAFNOSUPPORT; /* or should we proceed? */
503			goto done;
504		}
505
506		/*
507		 * If the next hop is an IPv6 address, then the node identified
508		 * by that address must be a neighbor of the sending host.
509		 */
510		ron = &opts->ip6po_nextroute;
511		if ((ron->ro_rt &&
512		     (ron->ro_rt->rt_flags & (RTF_UP | RTF_LLINFO)) !=
513		     (RTF_UP | RTF_LLINFO)) ||
514		    !IN6_ARE_ADDR_EQUAL(&satosin6(&ron->ro_dst)->sin6_addr,
515		    &sin6_next->sin6_addr)) {
516			if (ron->ro_rt) {
517				RTFREE(ron->ro_rt);
518				ron->ro_rt = NULL;
519			}
520			*satosin6(&ron->ro_dst) = *sin6_next;
521		}
522		if (ron->ro_rt == NULL) {
523			rtalloc((struct route *)ron); /* multi path case? */
524			if (ron->ro_rt == NULL ||
525			    !(ron->ro_rt->rt_flags & RTF_LLINFO)) {
526				if (ron->ro_rt) {
527					RTFREE(ron->ro_rt);
528					ron->ro_rt = NULL;
529				}
530				error = EHOSTUNREACH;
531				goto done;
532			}
533		}
534		rt = ron->ro_rt;
535		ifp = rt->rt_ifp;
536
537		/*
538		 * When cloning is required, try to allocate a route to the
539		 * destination so that the caller can store path MTU
540		 * information.
541		 */
542		if (!clone)
543			goto done;
544	}
545
546	/*
547	 * Use a cached route if it exists and is valid, else try to allocate
548	 * a new one.  Note that we should check the address family of the
549	 * cached destination, in case of sharing the cache with IPv4.
550	 */
551	if (ro) {
552		if (ro->ro_rt &&
553		    (!(ro->ro_rt->rt_flags & RTF_UP) ||
554		     ((struct sockaddr *)(&ro->ro_dst))->sa_family != AF_INET6 ||
555		     !IN6_ARE_ADDR_EQUAL(&satosin6(&ro->ro_dst)->sin6_addr,
556		     dst))) {
557			RTFREE(ro->ro_rt);
558			ro->ro_rt = (struct rtentry *)NULL;
559		}
560		if (ro->ro_rt == (struct rtentry *)NULL) {
561			struct sockaddr_in6 *sa6;
562
563			/* No route yet, so try to acquire one */
564			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
565			sa6 = (struct sockaddr_in6 *)&ro->ro_dst;
566			*sa6 = *dstsock;
567			sa6->sin6_scope_id = 0;
568
569			if (clone) {
570				rtalloc((struct route *)ro);
571			} else {
572				ro->ro_rt = rtalloc1(&((struct route *)ro)
573						     ->ro_dst, 0, 0UL);
574				if (ro->ro_rt)
575					RT_UNLOCK(ro->ro_rt);
576			}
577		}
578
579		/*
580		 * do not care about the result if we have the nexthop
581		 * explicitly specified.
582		 */
583		if (opts && opts->ip6po_nexthop)
584			goto done;
585
586		if (ro->ro_rt) {
587			ifp = ro->ro_rt->rt_ifp;
588
589			if (ifp == NULL) { /* can this really happen? */
590				RTFREE(ro->ro_rt);
591				ro->ro_rt = NULL;
592			}
593		}
594		if (ro->ro_rt == NULL)
595			error = EHOSTUNREACH;
596		rt = ro->ro_rt;
597
598		/*
599		 * Check if the outgoing interface conflicts with
600		 * the interface specified by ipi6_ifindex (if specified).
601		 * Note that loopback interface is always okay.
602		 * (this may happen when we are sending a packet to one of
603		 *  our own addresses.)
604		 */
605		if (ifp && opts && opts->ip6po_pktinfo &&
606		    opts->ip6po_pktinfo->ipi6_ifindex) {
607			if (!(ifp->if_flags & IFF_LOOPBACK) &&
608			    ifp->if_index !=
609			    opts->ip6po_pktinfo->ipi6_ifindex) {
610				error = EHOSTUNREACH;
611				goto done;
612			}
613		}
614	}
615
616  done:
617	if (ifp == NULL && rt == NULL) {
618		/*
619		 * This can happen if the caller did not pass a cached route
620		 * nor any other hints.  We treat this case an error.
621		 */
622		error = EHOSTUNREACH;
623	}
624	if (error == EHOSTUNREACH)
625		ip6stat.ip6s_noroute++;
626
627	if (retifp != NULL)
628		*retifp = ifp;
629	if (retrt != NULL)
630		*retrt = rt;	/* rt may be NULL */
631
632	return (error);
633}
634
635static int
636in6_selectif(dstsock, opts, mopts, ro, retifp)
637	struct sockaddr_in6 *dstsock;
638	struct ip6_pktopts *opts;
639	struct ip6_moptions *mopts;
640	struct route_in6 *ro;
641	struct ifnet **retifp;
642{
643	int error;
644	struct route_in6 sro;
645	struct rtentry *rt = NULL;
646
647	if (ro == NULL) {
648		bzero(&sro, sizeof(sro));
649		ro = &sro;
650	}
651
652	if ((error = selectroute(dstsock, opts, mopts, ro, retifp,
653				     &rt, 0, 1)) != 0) {
654		if (ro == &sro && rt && rt == sro.ro_rt)
655			RTFREE(rt);
656		return (error);
657	}
658
659	/*
660	 * do not use a rejected or black hole route.
661	 * XXX: this check should be done in the L2 output routine.
662	 * However, if we skipped this check here, we'd see the following
663	 * scenario:
664	 * - install a rejected route for a scoped address prefix
665	 *   (like fe80::/10)
666	 * - send a packet to a destination that matches the scoped prefix,
667	 *   with ambiguity about the scope zone.
668	 * - pick the outgoing interface from the route, and disambiguate the
669	 *   scope zone with the interface.
670	 * - ip6_output() would try to get another route with the "new"
671	 *   destination, which may be valid.
672	 * - we'd see no error on output.
673	 * Although this may not be very harmful, it should still be confusing.
674	 * We thus reject the case here.
675	 */
676	if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE))) {
677		int flags = (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
678
679		if (ro == &sro && rt && rt == sro.ro_rt)
680			RTFREE(rt);
681		return (flags);
682	}
683
684	/*
685	 * Adjust the "outgoing" interface.  If we're going to loop the packet
686	 * back to ourselves, the ifp would be the loopback interface.
687	 * However, we'd rather know the interface associated to the
688	 * destination address (which should probably be one of our own
689	 * addresses.)
690	 */
691	if (rt && rt->rt_ifa && rt->rt_ifa->ifa_ifp)
692		*retifp = rt->rt_ifa->ifa_ifp;
693
694	if (ro == &sro && rt && rt == sro.ro_rt)
695		RTFREE(rt);
696	return (0);
697}
698
699int
700in6_selectroute(dstsock, opts, mopts, ro, retifp, retrt, clone)
701	struct sockaddr_in6 *dstsock;
702	struct ip6_pktopts *opts;
703	struct ip6_moptions *mopts;
704	struct route_in6 *ro;
705	struct ifnet **retifp;
706	struct rtentry **retrt;
707	int clone;		/* meaningful only for bsdi and freebsd. */
708{
709	return (selectroute(dstsock, opts, mopts, ro, retifp,
710	    retrt, clone, 0));
711}
712
713/*
714 * Default hop limit selection. The precedence is as follows:
715 * 1. Hoplimit value specified via ioctl.
716 * 2. (If the outgoing interface is detected) the current
717 *     hop limit of the interface specified by router advertisement.
718 * 3. The system default hoplimit.
719 */
720int
721in6_selecthlim(in6p, ifp)
722	struct in6pcb *in6p;
723	struct ifnet *ifp;
724{
725	if (in6p && in6p->in6p_hops >= 0)
726		return (in6p->in6p_hops);
727	else if (ifp)
728		return (ND_IFINFO(ifp)->chlim);
729	else if (in6p && !IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
730		struct route_in6 ro6;
731		struct ifnet *lifp;
732
733		bzero(&ro6, sizeof(ro6));
734		ro6.ro_dst.sin6_family = AF_INET6;
735		ro6.ro_dst.sin6_len = sizeof(struct sockaddr_in6);
736		ro6.ro_dst.sin6_addr = in6p->in6p_faddr;
737		rtalloc((struct route *)&ro6);
738		if (ro6.ro_rt) {
739			lifp = ro6.ro_rt->rt_ifp;
740			RTFREE(ro6.ro_rt);
741			if (lifp)
742				return (ND_IFINFO(lifp)->chlim);
743		} else
744			return (ip6_defhlim);
745	}
746	return (ip6_defhlim);
747}
748
749/*
750 * XXX: this is borrowed from in6_pcbbind(). If possible, we should
751 * share this function by all *bsd*...
752 */
753int
754in6_pcbsetport(laddr, inp, cred)
755	struct in6_addr *laddr;
756	struct inpcb *inp;
757	struct ucred *cred;
758{
759	struct socket *so = inp->inp_socket;
760	u_int16_t lport = 0, first, last, *lastport;
761	int count, error = 0, wild = 0;
762	struct inpcbinfo *pcbinfo = inp->inp_pcbinfo;
763
764	INP_INFO_WLOCK_ASSERT(pcbinfo);
765	INP_LOCK_ASSERT(inp);
766
767	/* XXX: this is redundant when called from in6_pcbbind */
768	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0)
769		wild = INPLOOKUP_WILDCARD;
770
771	inp->inp_flags |= INP_ANONPORT;
772
773	if (inp->inp_flags & INP_HIGHPORT) {
774		first = ipport_hifirstauto;	/* sysctl */
775		last  = ipport_hilastauto;
776		lastport = &pcbinfo->lasthi;
777	} else if (inp->inp_flags & INP_LOWPORT) {
778		error = priv_check_cred(cred, PRIV_NETINET_RESERVEDPORT,
779		    SUSER_ALLOWJAIL);
780		if (error)
781			return error;
782		first = ipport_lowfirstauto;	/* 1023 */
783		last  = ipport_lowlastauto;	/* 600 */
784		lastport = &pcbinfo->lastlow;
785	} else {
786		first = ipport_firstauto;	/* sysctl */
787		last  = ipport_lastauto;
788		lastport = &pcbinfo->lastport;
789	}
790	/*
791	 * Simple check to ensure all ports are not used up causing
792	 * a deadlock here.
793	 *
794	 * We split the two cases (up and down) so that the direction
795	 * is not being tested on each round of the loop.
796	 */
797	if (first > last) {
798		/*
799		 * counting down
800		 */
801		count = first - last;
802
803		do {
804			if (count-- < 0) {	/* completely used? */
805				/*
806				 * Undo any address bind that may have
807				 * occurred above.
808				 */
809				inp->in6p_laddr = in6addr_any;
810				return (EAGAIN);
811			}
812			--*lastport;
813			if (*lastport > first || *lastport < last)
814				*lastport = first;
815			lport = htons(*lastport);
816		} while (in6_pcblookup_local(pcbinfo, &inp->in6p_laddr,
817					     lport, wild));
818	} else {
819		/*
820			 * counting up
821			 */
822		count = last - first;
823
824		do {
825			if (count-- < 0) {	/* completely used? */
826				/*
827				 * Undo any address bind that may have
828				 * occurred above.
829				 */
830				inp->in6p_laddr = in6addr_any;
831				return (EAGAIN);
832			}
833			++*lastport;
834			if (*lastport < first || *lastport > last)
835				*lastport = first;
836			lport = htons(*lastport);
837		} while (in6_pcblookup_local(pcbinfo,
838					     &inp->in6p_laddr, lport, wild));
839	}
840
841	inp->inp_lport = lport;
842	if (in_pcbinshash(inp) != 0) {
843		inp->in6p_laddr = in6addr_any;
844		inp->inp_lport = 0;
845		return (EAGAIN);
846	}
847
848	return (0);
849}
850
851void
852addrsel_policy_init()
853{
854	ADDRSEL_LOCK_INIT();
855	ADDRSEL_SXLOCK_INIT();
856
857	init_policy_queue();
858
859	/* initialize the "last resort" policy */
860	bzero(&defaultaddrpolicy, sizeof(defaultaddrpolicy));
861	defaultaddrpolicy.label = ADDR_LABEL_NOTAPP;
862}
863
864static struct in6_addrpolicy *
865lookup_addrsel_policy(key)
866	struct sockaddr_in6 *key;
867{
868	struct in6_addrpolicy *match = NULL;
869
870	ADDRSEL_LOCK();
871	match = match_addrsel_policy(key);
872
873	if (match == NULL)
874		match = &defaultaddrpolicy;
875	else
876		match->use++;
877	ADDRSEL_UNLOCK();
878
879	return (match);
880}
881
882/*
883 * Subroutines to manage the address selection policy table via sysctl.
884 */
885struct walkarg {
886	struct sysctl_req *w_req;
887};
888
889static int in6_src_sysctl(SYSCTL_HANDLER_ARGS);
890SYSCTL_DECL(_net_inet6_ip6);
891SYSCTL_NODE(_net_inet6_ip6, IPV6CTL_ADDRCTLPOLICY, addrctlpolicy,
892	CTLFLAG_RD, in6_src_sysctl, "");
893
894static int
895in6_src_sysctl(SYSCTL_HANDLER_ARGS)
896{
897	struct walkarg w;
898
899	if (req->newptr)
900		return EPERM;
901
902	bzero(&w, sizeof(w));
903	w.w_req = req;
904
905	return (walk_addrsel_policy(dump_addrsel_policyent, &w));
906}
907
908int
909in6_src_ioctl(cmd, data)
910	u_long cmd;
911	caddr_t data;
912{
913	int i;
914	struct in6_addrpolicy ent0;
915
916	if (cmd != SIOCAADDRCTL_POLICY && cmd != SIOCDADDRCTL_POLICY)
917		return (EOPNOTSUPP); /* check for safety */
918
919	ent0 = *(struct in6_addrpolicy *)data;
920
921	if (ent0.label == ADDR_LABEL_NOTAPP)
922		return (EINVAL);
923	/* check if the prefix mask is consecutive. */
924	if (in6_mask2len(&ent0.addrmask.sin6_addr, NULL) < 0)
925		return (EINVAL);
926	/* clear trailing garbages (if any) of the prefix address. */
927	for (i = 0; i < 4; i++) {
928		ent0.addr.sin6_addr.s6_addr32[i] &=
929			ent0.addrmask.sin6_addr.s6_addr32[i];
930	}
931	ent0.use = 0;
932
933	switch (cmd) {
934	case SIOCAADDRCTL_POLICY:
935		return (add_addrsel_policyent(&ent0));
936	case SIOCDADDRCTL_POLICY:
937		return (delete_addrsel_policyent(&ent0));
938	}
939
940	return (0);		/* XXX: compromise compilers */
941}
942
943/*
944 * The followings are implementation of the policy table using a
945 * simple tail queue.
946 * XXX such details should be hidden.
947 * XXX implementation using binary tree should be more efficient.
948 */
949struct addrsel_policyent {
950	TAILQ_ENTRY(addrsel_policyent) ape_entry;
951	struct in6_addrpolicy ape_policy;
952};
953
954TAILQ_HEAD(addrsel_policyhead, addrsel_policyent);
955
956struct addrsel_policyhead addrsel_policytab;
957
958static void
959init_policy_queue()
960{
961	TAILQ_INIT(&addrsel_policytab);
962}
963
964static int
965add_addrsel_policyent(newpolicy)
966	struct in6_addrpolicy *newpolicy;
967{
968	struct addrsel_policyent *new, *pol;
969
970	MALLOC(new, struct addrsel_policyent *, sizeof(*new), M_IFADDR,
971	       M_WAITOK);
972	ADDRSEL_XLOCK();
973	ADDRSEL_LOCK();
974
975	/* duplication check */
976	TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
977		if (IN6_ARE_ADDR_EQUAL(&newpolicy->addr.sin6_addr,
978				       &pol->ape_policy.addr.sin6_addr) &&
979		    IN6_ARE_ADDR_EQUAL(&newpolicy->addrmask.sin6_addr,
980				       &pol->ape_policy.addrmask.sin6_addr)) {
981			ADDRSEL_UNLOCK();
982			ADDRSEL_XUNLOCK();
983			FREE(new, M_IFADDR);
984			return (EEXIST);	/* or override it? */
985		}
986	}
987
988	bzero(new, sizeof(*new));
989
990	/* XXX: should validate entry */
991	new->ape_policy = *newpolicy;
992
993	TAILQ_INSERT_TAIL(&addrsel_policytab, new, ape_entry);
994	ADDRSEL_UNLOCK();
995	ADDRSEL_XUNLOCK();
996
997	return (0);
998}
999
1000static int
1001delete_addrsel_policyent(key)
1002	struct in6_addrpolicy *key;
1003{
1004	struct addrsel_policyent *pol;
1005
1006	ADDRSEL_XLOCK();
1007	ADDRSEL_LOCK();
1008
1009	/* search for the entry in the table */
1010	TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
1011		if (IN6_ARE_ADDR_EQUAL(&key->addr.sin6_addr,
1012		    &pol->ape_policy.addr.sin6_addr) &&
1013		    IN6_ARE_ADDR_EQUAL(&key->addrmask.sin6_addr,
1014		    &pol->ape_policy.addrmask.sin6_addr)) {
1015			break;
1016		}
1017	}
1018	if (pol == NULL) {
1019		ADDRSEL_UNLOCK();
1020		ADDRSEL_XUNLOCK();
1021		return (ESRCH);
1022	}
1023
1024	TAILQ_REMOVE(&addrsel_policytab, pol, ape_entry);
1025	ADDRSEL_UNLOCK();
1026	ADDRSEL_XUNLOCK();
1027
1028	return (0);
1029}
1030
1031static int
1032walk_addrsel_policy(callback, w)
1033	int (*callback) __P((struct in6_addrpolicy *, void *));
1034	void *w;
1035{
1036	struct addrsel_policyent *pol;
1037	int error = 0;
1038
1039	ADDRSEL_SLOCK();
1040	TAILQ_FOREACH(pol, &addrsel_policytab, ape_entry) {
1041		if ((error = (*callback)(&pol->ape_policy, w)) != 0) {
1042			ADDRSEL_SUNLOCK();
1043			return (error);
1044		}
1045	}
1046	ADDRSEL_SUNLOCK();
1047	return (error);
1048}
1049
1050static int
1051dump_addrsel_policyent(pol, arg)
1052	struct in6_addrpolicy *pol;
1053	void *arg;
1054{
1055	int error = 0;
1056	struct walkarg *w = arg;
1057
1058	error = SYSCTL_OUT(w->w_req, pol, sizeof(*pol));
1059
1060	return (error);
1061}
1062
1063static struct in6_addrpolicy *
1064match_addrsel_policy(key)
1065	struct sockaddr_in6 *key;
1066{
1067	struct addrsel_policyent *pent;
1068	struct in6_addrpolicy *bestpol = NULL, *pol;
1069	int matchlen, bestmatchlen = -1;
1070	u_char *mp, *ep, *k, *p, m;
1071
1072	TAILQ_FOREACH(pent, &addrsel_policytab, ape_entry) {
1073		matchlen = 0;
1074
1075		pol = &pent->ape_policy;
1076		mp = (u_char *)&pol->addrmask.sin6_addr;
1077		ep = mp + 16;	/* XXX: scope field? */
1078		k = (u_char *)&key->sin6_addr;
1079		p = (u_char *)&pol->addr.sin6_addr;
1080		for (; mp < ep && *mp; mp++, k++, p++) {
1081			m = *mp;
1082			if ((*k & m) != *p)
1083				goto next; /* not match */
1084			if (m == 0xff) /* short cut for a typical case */
1085				matchlen += 8;
1086			else {
1087				while (m >= 0x80) {
1088					matchlen++;
1089					m <<= 1;
1090				}
1091			}
1092		}
1093
1094		/* matched.  check if this is better than the current best. */
1095		if (bestpol == NULL ||
1096		    matchlen > bestmatchlen) {
1097			bestpol = pol;
1098			bestmatchlen = matchlen;
1099		}
1100
1101	  next:
1102		continue;
1103	}
1104
1105	return (bestpol);
1106}
1107