cpufunc.h revision 90589
1/*- 2 * Copyright (c) 1993 The Regents of the University of California. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the University of 16 * California, Berkeley and its contributors. 17 * 4. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * $FreeBSD: head/sys/i386/include/cpufunc.h 90589 2002-02-12 21:06:48Z dwmalone $ 34 */ 35 36/* 37 * Functions to provide access to special i386 instructions. 38 */ 39 40#ifndef _MACHINE_CPUFUNC_H_ 41#define _MACHINE_CPUFUNC_H_ 42 43#include <sys/cdefs.h> 44#include <machine/psl.h> 45 46__BEGIN_DECLS 47#define readb(va) (*(volatile u_int8_t *) (va)) 48#define readw(va) (*(volatile u_int16_t *) (va)) 49#define readl(va) (*(volatile u_int32_t *) (va)) 50 51#define writeb(va, d) (*(volatile u_int8_t *) (va) = (d)) 52#define writew(va, d) (*(volatile u_int16_t *) (va) = (d)) 53#define writel(va, d) (*(volatile u_int32_t *) (va) = (d)) 54 55#define CRITICAL_FORK (read_eflags() | PSL_I) 56 57#ifdef __GNUC__ 58 59#ifdef SWTCH_OPTIM_STATS 60extern int tlb_flush_count; /* XXX */ 61#endif 62 63static __inline void 64breakpoint(void) 65{ 66 __asm __volatile("int $3"); 67} 68 69static __inline u_int 70bsfl(u_int mask) 71{ 72 u_int result; 73 74 __asm __volatile("bsfl %1,%0" : "=r" (result) : "rm" (mask)); 75 return (result); 76} 77 78static __inline u_int 79bsrl(u_int mask) 80{ 81 u_int result; 82 83 __asm __volatile("bsrl %1,%0" : "=r" (result) : "rm" (mask)); 84 return (result); 85} 86 87static __inline void 88disable_intr(void) 89{ 90 __asm __volatile("cli" : : : "memory"); 91} 92 93static __inline void 94enable_intr(void) 95{ 96 __asm __volatile("sti"); 97} 98 99#define HAVE_INLINE_FFS 100 101static __inline int 102ffs(int mask) 103{ 104 /* 105 * Note that gcc-2's builtin ffs would be used if we didn't declare 106 * this inline or turn off the builtin. The builtin is faster but 107 * broken in gcc-2.4.5 and slower but working in gcc-2.5 and later 108 * versions. 109 */ 110 return (mask == 0 ? mask : bsfl((u_int)mask) + 1); 111} 112 113#define HAVE_INLINE_FLS 114 115static __inline int 116fls(int mask) 117{ 118 return (mask == 0 ? mask : bsrl((u_int)mask) + 1); 119} 120 121#if __GNUC__ < 2 122 123#define inb(port) inbv(port) 124#define outb(port, data) outbv(port, data) 125 126#else /* __GNUC >= 2 */ 127 128/* 129 * The following complications are to get around gcc not having a 130 * constraint letter for the range 0..255. We still put "d" in the 131 * constraint because "i" isn't a valid constraint when the port 132 * isn't constant. This only matters for -O0 because otherwise 133 * the non-working version gets optimized away. 134 * 135 * Use an expression-statement instead of a conditional expression 136 * because gcc-2.6.0 would promote the operands of the conditional 137 * and produce poor code for "if ((inb(var) & const1) == const2)". 138 * 139 * The unnecessary test `(port) < 0x10000' is to generate a warning if 140 * the `port' has type u_short or smaller. Such types are pessimal. 141 * This actually only works for signed types. The range check is 142 * careful to avoid generating warnings. 143 */ 144#define inb(port) __extension__ ({ \ 145 u_char _data; \ 146 if (__builtin_constant_p(port) && ((port) & 0xffff) < 0x100 \ 147 && (port) < 0x10000) \ 148 _data = inbc(port); \ 149 else \ 150 _data = inbv(port); \ 151 _data; }) 152 153#define outb(port, data) ( \ 154 __builtin_constant_p(port) && ((port) & 0xffff) < 0x100 \ 155 && (port) < 0x10000 \ 156 ? outbc(port, data) : outbv(port, data)) 157 158static __inline u_char 159inbc(u_int port) 160{ 161 u_char data; 162 163 __asm __volatile("inb %1,%0" : "=a" (data) : "id" ((u_short)(port))); 164 return (data); 165} 166 167static __inline void 168outbc(u_int port, u_char data) 169{ 170 __asm __volatile("outb %0,%1" : : "a" (data), "id" ((u_short)(port))); 171} 172 173#endif /* __GNUC <= 2 */ 174 175static __inline u_char 176inbv(u_int port) 177{ 178 u_char data; 179 /* 180 * We use %%dx and not %1 here because i/o is done at %dx and not at 181 * %edx, while gcc generates inferior code (movw instead of movl) 182 * if we tell it to load (u_short) port. 183 */ 184 __asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port)); 185 return (data); 186} 187 188static __inline u_int 189inl(u_int port) 190{ 191 u_int data; 192 193 __asm __volatile("inl %%dx,%0" : "=a" (data) : "d" (port)); 194 return (data); 195} 196 197static __inline void 198insb(u_int port, void *addr, size_t cnt) 199{ 200 __asm __volatile("cld; rep; insb" 201 : "+D" (addr), "+c" (cnt) 202 : "d" (port) 203 : "memory"); 204} 205 206static __inline void 207insw(u_int port, void *addr, size_t cnt) 208{ 209 __asm __volatile("cld; rep; insw" 210 : "+D" (addr), "+c" (cnt) 211 : "d" (port) 212 : "memory"); 213} 214 215static __inline void 216insl(u_int port, void *addr, size_t cnt) 217{ 218 __asm __volatile("cld; rep; insl" 219 : "+D" (addr), "+c" (cnt) 220 : "d" (port) 221 : "memory"); 222} 223 224static __inline void 225invd(void) 226{ 227 __asm __volatile("invd"); 228} 229 230#if defined(SMP) && defined(_KERNEL) 231 232/* 233 * When using APIC IPI's, invlpg() is not simply the invlpg instruction 234 * (this is a bug) and the inlining cost is prohibitive since the call 235 * executes into the IPI transmission system. 236 */ 237void invlpg __P((u_int addr)); 238void invltlb __P((void)); 239 240static __inline void 241cpu_invlpg(void *addr) 242{ 243 __asm __volatile("invlpg %0" : : "m" (*(char *)addr) : "memory"); 244} 245 246static __inline void 247cpu_invltlb(void) 248{ 249 u_int temp; 250 /* 251 * This should be implemented as load_cr3(rcr3()) when load_cr3() 252 * is inlined. 253 */ 254 __asm __volatile("movl %%cr3, %0; movl %0, %%cr3" : "=r" (temp) 255 : : "memory"); 256#if defined(SWTCH_OPTIM_STATS) 257 ++tlb_flush_count; 258#endif 259} 260 261#else /* !(SMP && _KERNEL) */ 262 263static __inline void 264invlpg(u_int addr) 265{ 266 __asm __volatile("invlpg %0" : : "m" (*(char *)addr) : "memory"); 267} 268 269static __inline void 270invltlb(void) 271{ 272 u_int temp; 273 /* 274 * This should be implemented as load_cr3(rcr3()) when load_cr3() 275 * is inlined. 276 */ 277 __asm __volatile("movl %%cr3, %0; movl %0, %%cr3" : "=r" (temp) 278 : : "memory"); 279#ifdef SWTCH_OPTIM_STATS 280 ++tlb_flush_count; 281#endif 282} 283 284#endif /* SMP && _KERNEL */ 285 286static __inline u_short 287inw(u_int port) 288{ 289 u_short data; 290 291 __asm __volatile("inw %%dx,%0" : "=a" (data) : "d" (port)); 292 return (data); 293} 294 295static __inline void 296outbv(u_int port, u_char data) 297{ 298 u_char al; 299 /* 300 * Use an unnecessary assignment to help gcc's register allocator. 301 * This make a large difference for gcc-1.40 and a tiny difference 302 * for gcc-2.6.0. For gcc-1.40, al had to be ``asm("ax")'' for 303 * best results. gcc-2.6.0 can't handle this. 304 */ 305 al = data; 306 __asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port)); 307} 308 309static __inline void 310outl(u_int port, u_int data) 311{ 312 /* 313 * outl() and outw() aren't used much so we haven't looked at 314 * possible micro-optimizations such as the unnecessary 315 * assignment for them. 316 */ 317 __asm __volatile("outl %0,%%dx" : : "a" (data), "d" (port)); 318} 319 320static __inline void 321outsb(u_int port, const void *addr, size_t cnt) 322{ 323 __asm __volatile("cld; rep; outsb" 324 : "+S" (addr), "+c" (cnt) 325 : "d" (port)); 326} 327 328static __inline void 329outsw(u_int port, const void *addr, size_t cnt) 330{ 331 __asm __volatile("cld; rep; outsw" 332 : "+S" (addr), "+c" (cnt) 333 : "d" (port)); 334} 335 336static __inline void 337outsl(u_int port, const void *addr, size_t cnt) 338{ 339 __asm __volatile("cld; rep; outsl" 340 : "+S" (addr), "+c" (cnt) 341 : "d" (port)); 342} 343 344static __inline void 345outw(u_int port, u_short data) 346{ 347 __asm __volatile("outw %0,%%dx" : : "a" (data), "d" (port)); 348} 349 350static __inline u_int 351rcr2(void) 352{ 353 u_int data; 354 355 __asm __volatile("movl %%cr2,%0" : "=r" (data)); 356 return (data); 357} 358 359static __inline u_int 360read_eflags(void) 361{ 362 u_int ef; 363 364 __asm __volatile("pushfl; popl %0" : "=r" (ef)); 365 return (ef); 366} 367 368static __inline void 369do_cpuid(u_int ax, u_int *p) 370{ 371 __asm __volatile( 372 "cpuid" 373 : "=a" (p[0]), "=b" (p[1]), "=c" (p[2]), "=d" (p[3]) 374 : "0" (ax) 375 ); 376} 377 378static __inline u_int64_t 379rdmsr(u_int msr) 380{ 381 u_int64_t rv; 382 383 __asm __volatile("rdmsr" : "=A" (rv) : "c" (msr)); 384 return (rv); 385} 386 387static __inline u_int64_t 388rdpmc(u_int pmc) 389{ 390 u_int64_t rv; 391 392 __asm __volatile("rdpmc" : "=A" (rv) : "c" (pmc)); 393 return (rv); 394} 395 396static __inline u_int64_t 397rdtsc(void) 398{ 399 u_int64_t rv; 400 401 __asm __volatile("rdtsc" : "=A" (rv)); 402 return (rv); 403} 404 405static __inline void 406wbinvd(void) 407{ 408 __asm __volatile("wbinvd"); 409} 410 411static __inline void 412write_eflags(u_int ef) 413{ 414 __asm __volatile("pushl %0; popfl" : : "r" (ef)); 415} 416 417static __inline void 418wrmsr(u_int msr, u_int64_t newval) 419{ 420 __asm __volatile("wrmsr" : : "A" (newval), "c" (msr)); 421} 422 423static __inline u_int 424rfs(void) 425{ 426 u_int sel; 427 __asm __volatile("movl %%fs,%0" : "=rm" (sel)); 428 return (sel); 429} 430 431static __inline u_int 432rgs(void) 433{ 434 u_int sel; 435 __asm __volatile("movl %%gs,%0" : "=rm" (sel)); 436 return (sel); 437} 438 439static __inline void 440load_fs(u_int sel) 441{ 442 __asm __volatile("movl %0,%%fs" : : "rm" (sel)); 443} 444 445static __inline void 446load_gs(u_int sel) 447{ 448 __asm __volatile("movl %0,%%gs" : : "rm" (sel)); 449} 450 451static __inline u_int 452rdr0(void) 453{ 454 u_int data; 455 __asm __volatile("movl %%dr0,%0" : "=r" (data)); 456 return (data); 457} 458 459static __inline void 460load_dr0(u_int sel) 461{ 462 __asm __volatile("movl %0,%%dr0" : : "r" (sel)); 463} 464 465static __inline u_int 466rdr1(void) 467{ 468 u_int data; 469 __asm __volatile("movl %%dr1,%0" : "=r" (data)); 470 return (data); 471} 472 473static __inline void 474load_dr1(u_int sel) 475{ 476 __asm __volatile("movl %0,%%dr1" : : "r" (sel)); 477} 478 479static __inline u_int 480rdr2(void) 481{ 482 u_int data; 483 __asm __volatile("movl %%dr2,%0" : "=r" (data)); 484 return (data); 485} 486 487static __inline void 488load_dr2(u_int sel) 489{ 490 __asm __volatile("movl %0,%%dr2" : : "r" (sel)); 491} 492 493static __inline u_int 494rdr3(void) 495{ 496 u_int data; 497 __asm __volatile("movl %%dr3,%0" : "=r" (data)); 498 return (data); 499} 500 501static __inline void 502load_dr3(u_int sel) 503{ 504 __asm __volatile("movl %0,%%dr3" : : "r" (sel)); 505} 506 507static __inline u_int 508rdr4(void) 509{ 510 u_int data; 511 __asm __volatile("movl %%dr4,%0" : "=r" (data)); 512 return (data); 513} 514 515static __inline void 516load_dr4(u_int sel) 517{ 518 __asm __volatile("movl %0,%%dr4" : : "r" (sel)); 519} 520 521static __inline u_int 522rdr5(void) 523{ 524 u_int data; 525 __asm __volatile("movl %%dr5,%0" : "=r" (data)); 526 return (data); 527} 528 529static __inline void 530load_dr5(u_int sel) 531{ 532 __asm __volatile("movl %0,%%dr5" : : "r" (sel)); 533} 534 535static __inline u_int 536rdr6(void) 537{ 538 u_int data; 539 __asm __volatile("movl %%dr6,%0" : "=r" (data)); 540 return (data); 541} 542 543static __inline void 544load_dr6(u_int sel) 545{ 546 __asm __volatile("movl %0,%%dr6" : : "r" (sel)); 547} 548 549static __inline u_int 550rdr7(void) 551{ 552 u_int data; 553 __asm __volatile("movl %%dr7,%0" : "=r" (data)); 554 return (data); 555} 556 557static __inline void 558load_dr7(u_int sel) 559{ 560 __asm __volatile("movl %0,%%dr7" : : "r" (sel)); 561} 562 563static __inline critical_t 564cpu_critical_enter(void) 565{ 566 critical_t eflags; 567 568 eflags = read_eflags(); 569 disable_intr(); 570 return (eflags); 571} 572 573static __inline void 574cpu_critical_exit(critical_t eflags) 575{ 576 write_eflags(eflags); 577} 578 579#else /* !__GNUC__ */ 580 581int breakpoint __P((void)); 582u_int bsfl __P((u_int mask)); 583u_int bsrl __P((u_int mask)); 584void disable_intr __P((void)); 585void do_cpuid __P((u_int ax, u_int *p)); 586void enable_intr __P((void)); 587u_char inb __P((u_int port)); 588u_int inl __P((u_int port)); 589void insb __P((u_int port, void *addr, size_t cnt)); 590void insl __P((u_int port, void *addr, size_t cnt)); 591void insw __P((u_int port, void *addr, size_t cnt)); 592void invd __P((void)); 593void invlpg __P((u_int addr)); 594void invltlb __P((void)); 595u_short inw __P((u_int port)); 596void outb __P((u_int port, u_char data)); 597void outl __P((u_int port, u_int data)); 598void outsb __P((u_int port, void *addr, size_t cnt)); 599void outsl __P((u_int port, void *addr, size_t cnt)); 600void outsw __P((u_int port, void *addr, size_t cnt)); 601void outw __P((u_int port, u_short data)); 602u_int rcr2 __P((void)); 603u_int64_t rdmsr __P((u_int msr)); 604u_int64_t rdpmc __P((u_int pmc)); 605u_int64_t rdtsc __P((void)); 606u_int read_eflags __P((void)); 607void wbinvd __P((void)); 608void write_eflags __P((u_int ef)); 609void wrmsr __P((u_int msr, u_int64_t newval)); 610u_int rfs __P((void)); 611u_int rgs __P((void)); 612void load_fs __P((u_int sel)); 613void load_gs __P((u_int sel)); 614critical_t cpu_critical_enter __P((void)); 615void cpu_critical_exit __P((critical_t eflags)); 616 617#endif /* __GNUC__ */ 618 619void load_cr0 __P((u_int cr0)); 620void load_cr3 __P((u_int cr3)); 621void load_cr4 __P((u_int cr4)); 622void ltr __P((u_short sel)); 623u_int rcr0 __P((void)); 624u_int rcr3 __P((void)); 625u_int rcr4 __P((void)); 626void reset_dbregs __P((void)); 627__END_DECLS 628 629#endif /* !_MACHINE_CPUFUNC_H_ */ 630