tny_a9263.dts revision 262573
1/* 2 * usb_a9263.dts - Device Tree file for Caloa USB A9293 board 3 * 4 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 5 * 6 * Licensed under GPLv2 only 7 */ 8/dts-v1/; 9#include "at91sam9263.dtsi" 10 11/ { 12 model = "Calao TNY A9263"; 13 compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9"; 14 15 chosen { 16 bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; 17 }; 18 19 memory { 20 reg = <0x20000000 0x4000000>; 21 }; 22 23 clocks { 24 #address-cells = <1>; 25 #size-cells = <1>; 26 ranges; 27 28 main_clock: clock@0 { 29 compatible = "atmel,osc", "fixed-clock"; 30 clock-frequency = <12000000>; 31 }; 32 }; 33 34 ahb { 35 apb { 36 dbgu: serial@ffffee00 { 37 status = "okay"; 38 }; 39 40 usb1: gadget@fff78000 { 41 atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; 42 status = "okay"; 43 }; 44 }; 45 46 nand0: nand@40000000 { 47 nand-bus-width = <8>; 48 nand-ecc-mode = "soft"; 49 nand-on-flash-bbt; 50 status = "okay"; 51 52 at91bootstrap@0 { 53 label = "at91bootstrap"; 54 reg = <0x0 0x20000>; 55 }; 56 57 barebox@20000 { 58 label = "barebox"; 59 reg = <0x20000 0x40000>; 60 }; 61 62 bareboxenv@60000 { 63 label = "bareboxenv"; 64 reg = <0x60000 0x20000>; 65 }; 66 67 bareboxenv2@80000 { 68 label = "bareboxenv2"; 69 reg = <0x80000 0x20000>; 70 }; 71 72 oftree@80000 { 73 label = "oftree"; 74 reg = <0xa0000 0x20000>; 75 }; 76 77 kernel@a0000 { 78 label = "kernel"; 79 reg = <0xc0000 0x400000>; 80 }; 81 82 rootfs@4a0000 { 83 label = "rootfs"; 84 reg = <0x4c0000 0x7800000>; 85 }; 86 87 data@7ca0000 { 88 label = "data"; 89 reg = <0x7cc0000 0x8340000>; 90 }; 91 }; 92 }; 93 94 i2c@0 { 95 status = "okay"; 96 }; 97}; 98