at91rm9200ek.dts revision 262573
1/* 2 * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit 3 * 4 * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> 5 * 6 * Licensed under GPLv2 only 7 */ 8/dts-v1/; 9#include "at91rm9200.dtsi" 10 11/ { 12 model = "Atmel AT91RM9200 evaluation kit"; 13 compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; 14 15 memory { 16 reg = <0x20000000 0x4000000>; 17 }; 18 19 clocks { 20 #address-cells = <1>; 21 #size-cells = <1>; 22 ranges; 23 24 main_clock: clock@0 { 25 compatible = "atmel,osc", "fixed-clock"; 26 clock-frequency = <18432000>; 27 }; 28 }; 29 30 ahb { 31 apb { 32 usb1: gadget@fffb0000 { 33 atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; 34 atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; 35 status = "okay"; 36 }; 37 38 macb0: ethernet@fffbc000 { 39 phy-mode = "rmii"; 40 status = "okay"; 41 42 phy0: ethernet-phy { 43 interrupt-parent = <&pioC>; 44 interrupts = <4 IRQ_TYPE_EDGE_BOTH>; 45 }; 46 }; 47 48 usart1: serial@fffc4000 { 49 pinctrl-0 = 50 <&pinctrl_uart1 51 &pinctrl_uart1_rts 52 &pinctrl_uart1_cts 53 &pinctrl_uart1_dtr_dsr 54 &pinctrl_uart1_dcd 55 &pinctrl_uart1_ri>; 56 status = "okay"; 57 }; 58 59 spi0: spi@fffe0000 { 60 status = "okay"; 61 cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; 62 mtd_dataflash@0 { 63 compatible = "atmel,at45", "atmel,dataflash"; 64 spi-max-frequency = <15000000>; 65 reg = <0>; 66 }; 67 }; 68 69 dbgu: serial@fffff200 { 70 status = "okay"; 71 }; 72 }; 73 74 usb0: ohci@00300000 { 75 num-ports = <2>; 76 status = "okay"; 77 }; 78 79 nor_flash@10000000 { 80 compatible = "cfi-flash"; 81 reg = <0x10000000 0x800000>; 82 linux,mtd-name = "physmap-flash.0"; 83 bank-width = <2>; 84 #address-cells = <1>; 85 #size-cells = <1>; 86 87 barebox@0 { 88 label = "barebox"; 89 reg = <0x00000 0x40000>; 90 }; 91 92 bareboxenv@40000 { 93 label = "bareboxenv"; 94 reg = <0x40000 0x10000>; 95 }; 96 97 kernel@50000 { 98 label = "kernel"; 99 reg = <0x50000 0x300000>; 100 }; 101 102 root@350000 { 103 label = "root"; 104 reg = <0x350000 0x4B0000>; 105 }; 106 }; 107 }; 108 109 leds { 110 compatible = "gpio-leds"; 111 112 ds2 { 113 label = "green"; 114 gpios = <&pioB 0 GPIO_ACTIVE_LOW>; 115 linux,default-trigger = "mmc0"; 116 }; 117 118 ds4 { 119 label = "yellow"; 120 gpios = <&pioB 1 GPIO_ACTIVE_LOW>; 121 linux,default-trigger = "heartbeat"; 122 }; 123 124 ds6 { 125 label = "red"; 126 gpios = <&pioB 2 GPIO_ACTIVE_LOW>; 127 }; 128 }; 129}; 130