if_ural.c revision 188419
1/* $FreeBSD: head/sys/dev/usb2/wlan/if_ural2.c 188419 2009-02-09 22:18:11Z thompsa $ */ 2 3/*- 4 * Copyright (c) 2005, 2006 5 * Damien Bergamini <damien.bergamini@free.fr> 6 * 7 * Copyright (c) 2006, 2008 8 * Hans Petter Selasky <hselasky@freebsd.org> 9 * 10 * Permission to use, copy, modify, and distribute this software for any 11 * purpose with or without fee is hereby granted, provided that the above 12 * copyright notice and this permission notice appear in all copies. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 15 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 16 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 17 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 18 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 19 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 20 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 21 */ 22 23#include <sys/cdefs.h> 24__FBSDID("$FreeBSD: head/sys/dev/usb2/wlan/if_ural2.c 188419 2009-02-09 22:18:11Z thompsa $"); 25 26/*- 27 * Ralink Technology RT2500USB chipset driver 28 * http://www.ralinktech.com/ 29 */ 30 31#include <dev/usb2/include/usb2_devid.h> 32#include <dev/usb2/include/usb2_standard.h> 33#include <dev/usb2/include/usb2_mfunc.h> 34#include <dev/usb2/include/usb2_error.h> 35 36#define USB_DEBUG_VAR ural_debug 37 38#include <dev/usb2/core/usb2_core.h> 39#include <dev/usb2/core/usb2_lookup.h> 40#include <dev/usb2/core/usb2_process.h> 41#include <dev/usb2/core/usb2_debug.h> 42#include <dev/usb2/core/usb2_request.h> 43#include <dev/usb2/core/usb2_busdma.h> 44#include <dev/usb2/core/usb2_util.h> 45 46#include <dev/usb2/wlan/usb2_wlan.h> 47#include <dev/usb2/wlan/if_uralreg.h> 48#include <dev/usb2/wlan/if_uralvar.h> 49 50#if USB_DEBUG 51static int ural_debug = 0; 52 53SYSCTL_NODE(_hw_usb2, OID_AUTO, ural, CTLFLAG_RW, 0, "USB ural"); 54SYSCTL_INT(_hw_usb2_ural, OID_AUTO, debug, CTLFLAG_RW, &ural_debug, 0, 55 "Debug level"); 56#endif 57 58#define ural_do_request(sc,req,data) \ 59 usb2_do_request_proc((sc)->sc_udev, &(sc)->sc_tq, req, data, 0, NULL, 5000) 60 61#define URAL_RSSI(rssi) \ 62 ((rssi) > (RAL_NOISE_FLOOR + RAL_RSSI_CORR) ? \ 63 ((rssi) - (RAL_NOISE_FLOOR + RAL_RSSI_CORR)) : 0) 64 65/* various supported device vendors/products */ 66static const struct usb2_device_id ural_devs[] = { 67 { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_ASUS_WL167G) }, 68 { USB_VP(USB_VENDOR_ASUS, USB_PRODUCT_RALINK_RT2570) }, 69 { USB_VP(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5D7050) }, 70 { USB_VP(USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5D7051) }, 71 { USB_VP(USB_VENDOR_CISCOLINKSYS, USB_PRODUCT_CISCOLINKSYS_HU200TS) }, 72 { USB_VP(USB_VENDOR_CISCOLINKSYS, USB_PRODUCT_CISCOLINKSYS_WUSB54G) }, 73 { USB_VP(USB_VENDOR_CISCOLINKSYS, USB_PRODUCT_CISCOLINKSYS_WUSB54GP) }, 74 { USB_VP(USB_VENDOR_CONCEPTRONIC2, USB_PRODUCT_CONCEPTRONIC2_C54RU) }, 75 { USB_VP(USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DWLG122) }, 76 { USB_VP(USB_VENDOR_GIGABYTE, USB_PRODUCT_GIGABYTE_GN54G) }, 77 { USB_VP(USB_VENDOR_GIGABYTE, USB_PRODUCT_GIGABYTE_GNWBKG) }, 78 { USB_VP(USB_VENDOR_GUILLEMOT, USB_PRODUCT_GUILLEMOT_HWGUSB254) }, 79 { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_KG54) }, 80 { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_KG54AI) }, 81 { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_KG54YB) }, 82 { USB_VP(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_NINWIFI) }, 83 { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT2570) }, 84 { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT2570_2) }, 85 { USB_VP(USB_VENDOR_MSI, USB_PRODUCT_MSI_RT2570_3) }, 86 { USB_VP(USB_VENDOR_NOVATECH, USB_PRODUCT_NOVATECH_NV902) }, 87 { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT2570) }, 88 { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT2570_2) }, 89 { USB_VP(USB_VENDOR_RALINK, USB_PRODUCT_RALINK_RT2570_3) }, 90 { USB_VP(USB_VENDOR_SIEMENS2, USB_PRODUCT_SIEMENS2_WL54G) }, 91 { USB_VP(USB_VENDOR_SMC, USB_PRODUCT_SMC_2862WG) }, 92 { USB_VP(USB_VENDOR_SPHAIRON, USB_PRODUCT_SPHAIRON_UB801R) }, 93 { USB_VP(USB_VENDOR_SURECOM, USB_PRODUCT_SURECOM_RT2570) }, 94 { USB_VP(USB_VENDOR_VTECH, USB_PRODUCT_VTECH_RT2570) }, 95 { USB_VP(USB_VENDOR_ZINWELL, USB_PRODUCT_ZINWELL_RT2570) }, 96}; 97 98static usb2_callback_t ural_bulk_read_callback; 99static usb2_callback_t ural_bulk_write_callback; 100 101static usb2_proc_callback_t ural_attach_post; 102static usb2_proc_callback_t ural_task; 103static usb2_proc_callback_t ural_scantask; 104static usb2_proc_callback_t ural_promisctask; 105static usb2_proc_callback_t ural_amrr_task; 106static usb2_proc_callback_t ural_init_task; 107static usb2_proc_callback_t ural_stop_task; 108 109static struct ieee80211vap *ural_vap_create(struct ieee80211com *, 110 const char name[IFNAMSIZ], int unit, int opmode, 111 int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], 112 const uint8_t mac[IEEE80211_ADDR_LEN]); 113static void ural_vap_delete(struct ieee80211vap *); 114static void ural_tx_free(struct ural_tx_data *, int); 115static void ural_setup_tx_list(struct ural_softc *); 116static void ural_unsetup_tx_list(struct ural_softc *); 117static int ural_newstate(struct ieee80211vap *, 118 enum ieee80211_state, int); 119static void ural_setup_tx_desc(struct ural_softc *, 120 struct ural_tx_desc *, uint32_t, int, int); 121static int ural_tx_bcn(struct ural_softc *, struct mbuf *, 122 struct ieee80211_node *); 123static int ural_tx_mgt(struct ural_softc *, struct mbuf *, 124 struct ieee80211_node *); 125static int ural_tx_data(struct ural_softc *, struct mbuf *, 126 struct ieee80211_node *); 127static void ural_start(struct ifnet *); 128static int ural_ioctl(struct ifnet *, u_long, caddr_t); 129static void ural_set_testmode(struct ural_softc *); 130static void ural_eeprom_read(struct ural_softc *, uint16_t, void *, 131 int); 132static uint16_t ural_read(struct ural_softc *, uint16_t); 133static void ural_read_multi(struct ural_softc *, uint16_t, void *, 134 int); 135static void ural_write(struct ural_softc *, uint16_t, uint16_t); 136static void ural_write_multi(struct ural_softc *, uint16_t, void *, 137 int) __unused; 138static void ural_bbp_write(struct ural_softc *, uint8_t, uint8_t); 139static uint8_t ural_bbp_read(struct ural_softc *, uint8_t); 140static void ural_rf_write(struct ural_softc *, uint8_t, uint32_t); 141static struct ieee80211_node *ural_node_alloc(struct ieee80211vap *, 142 const uint8_t mac[IEEE80211_ADDR_LEN]); 143static void ural_newassoc(struct ieee80211_node *, int); 144static void ural_scan_start(struct ieee80211com *); 145static void ural_scan_end(struct ieee80211com *); 146static void ural_set_channel(struct ieee80211com *); 147static void ural_set_chan(struct ural_softc *, 148 struct ieee80211_channel *); 149static void ural_disable_rf_tune(struct ural_softc *); 150static void ural_enable_tsf_sync(struct ural_softc *); 151static void ural_update_slot(struct ifnet *); 152static void ural_set_txpreamble(struct ural_softc *); 153static void ural_set_basicrates(struct ural_softc *, 154 const struct ieee80211_channel *); 155static void ural_set_bssid(struct ural_softc *, const uint8_t *); 156static void ural_set_macaddr(struct ural_softc *, uint8_t *); 157static const char *ural_get_rf(int); 158static void ural_read_eeprom(struct ural_softc *); 159static int ural_bbp_init(struct ural_softc *); 160static void ural_set_txantenna(struct ural_softc *, int); 161static void ural_set_rxantenna(struct ural_softc *, int); 162static void ural_init(void *); 163static int ural_raw_xmit(struct ieee80211_node *, struct mbuf *, 164 const struct ieee80211_bpf_params *); 165static void ural_amrr_start(struct ural_softc *, 166 struct ieee80211_node *); 167static void ural_amrr_timeout(void *); 168static void ural_queue_command(struct ural_softc *, 169 usb2_proc_callback_t *, struct usb2_proc_msg *, 170 struct usb2_proc_msg *); 171 172/* 173 * Default values for MAC registers; values taken from the reference driver. 174 */ 175static const struct { 176 uint16_t reg; 177 uint16_t val; 178} ural_def_mac[] = { 179 { RAL_TXRX_CSR5, 0x8c8d }, 180 { RAL_TXRX_CSR6, 0x8b8a }, 181 { RAL_TXRX_CSR7, 0x8687 }, 182 { RAL_TXRX_CSR8, 0x0085 }, 183 { RAL_MAC_CSR13, 0x1111 }, 184 { RAL_MAC_CSR14, 0x1e11 }, 185 { RAL_TXRX_CSR21, 0xe78f }, 186 { RAL_MAC_CSR9, 0xff1d }, 187 { RAL_MAC_CSR11, 0x0002 }, 188 { RAL_MAC_CSR22, 0x0053 }, 189 { RAL_MAC_CSR15, 0x0000 }, 190 { RAL_MAC_CSR8, RAL_FRAME_SIZE }, 191 { RAL_TXRX_CSR19, 0x0000 }, 192 { RAL_TXRX_CSR18, 0x005a }, 193 { RAL_PHY_CSR2, 0x0000 }, 194 { RAL_TXRX_CSR0, 0x1ec0 }, 195 { RAL_PHY_CSR4, 0x000f } 196}; 197 198/* 199 * Default values for BBP registers; values taken from the reference driver. 200 */ 201static const struct { 202 uint8_t reg; 203 uint8_t val; 204} ural_def_bbp[] = { 205 { 3, 0x02 }, 206 { 4, 0x19 }, 207 { 14, 0x1c }, 208 { 15, 0x30 }, 209 { 16, 0xac }, 210 { 17, 0x48 }, 211 { 18, 0x18 }, 212 { 19, 0xff }, 213 { 20, 0x1e }, 214 { 21, 0x08 }, 215 { 22, 0x08 }, 216 { 23, 0x08 }, 217 { 24, 0x80 }, 218 { 25, 0x50 }, 219 { 26, 0x08 }, 220 { 27, 0x23 }, 221 { 30, 0x10 }, 222 { 31, 0x2b }, 223 { 32, 0xb9 }, 224 { 34, 0x12 }, 225 { 35, 0x50 }, 226 { 39, 0xc4 }, 227 { 40, 0x02 }, 228 { 41, 0x60 }, 229 { 53, 0x10 }, 230 { 54, 0x18 }, 231 { 56, 0x08 }, 232 { 57, 0x10 }, 233 { 58, 0x08 }, 234 { 61, 0x60 }, 235 { 62, 0x10 }, 236 { 75, 0xff } 237}; 238 239/* 240 * Default values for RF register R2 indexed by channel numbers. 241 */ 242static const uint32_t ural_rf2522_r2[] = { 243 0x307f6, 0x307fb, 0x30800, 0x30805, 0x3080a, 0x3080f, 0x30814, 244 0x30819, 0x3081e, 0x30823, 0x30828, 0x3082d, 0x30832, 0x3083e 245}; 246 247static const uint32_t ural_rf2523_r2[] = { 248 0x00327, 0x00328, 0x00329, 0x0032a, 0x0032b, 0x0032c, 0x0032d, 249 0x0032e, 0x0032f, 0x00340, 0x00341, 0x00342, 0x00343, 0x00346 250}; 251 252static const uint32_t ural_rf2524_r2[] = { 253 0x00327, 0x00328, 0x00329, 0x0032a, 0x0032b, 0x0032c, 0x0032d, 254 0x0032e, 0x0032f, 0x00340, 0x00341, 0x00342, 0x00343, 0x00346 255}; 256 257static const uint32_t ural_rf2525_r2[] = { 258 0x20327, 0x20328, 0x20329, 0x2032a, 0x2032b, 0x2032c, 0x2032d, 259 0x2032e, 0x2032f, 0x20340, 0x20341, 0x20342, 0x20343, 0x20346 260}; 261 262static const uint32_t ural_rf2525_hi_r2[] = { 263 0x2032f, 0x20340, 0x20341, 0x20342, 0x20343, 0x20344, 0x20345, 264 0x20346, 0x20347, 0x20348, 0x20349, 0x2034a, 0x2034b, 0x2034e 265}; 266 267static const uint32_t ural_rf2525e_r2[] = { 268 0x2044d, 0x2044e, 0x2044f, 0x20460, 0x20461, 0x20462, 0x20463, 269 0x20464, 0x20465, 0x20466, 0x20467, 0x20468, 0x20469, 0x2046b 270}; 271 272static const uint32_t ural_rf2526_hi_r2[] = { 273 0x0022a, 0x0022b, 0x0022b, 0x0022c, 0x0022c, 0x0022d, 0x0022d, 274 0x0022e, 0x0022e, 0x0022f, 0x0022d, 0x00240, 0x00240, 0x00241 275}; 276 277static const uint32_t ural_rf2526_r2[] = { 278 0x00226, 0x00227, 0x00227, 0x00228, 0x00228, 0x00229, 0x00229, 279 0x0022a, 0x0022a, 0x0022b, 0x0022b, 0x0022c, 0x0022c, 0x0022d 280}; 281 282/* 283 * For dual-band RF, RF registers R1 and R4 also depend on channel number; 284 * values taken from the reference driver. 285 */ 286static const struct { 287 uint8_t chan; 288 uint32_t r1; 289 uint32_t r2; 290 uint32_t r4; 291} ural_rf5222[] = { 292 { 1, 0x08808, 0x0044d, 0x00282 }, 293 { 2, 0x08808, 0x0044e, 0x00282 }, 294 { 3, 0x08808, 0x0044f, 0x00282 }, 295 { 4, 0x08808, 0x00460, 0x00282 }, 296 { 5, 0x08808, 0x00461, 0x00282 }, 297 { 6, 0x08808, 0x00462, 0x00282 }, 298 { 7, 0x08808, 0x00463, 0x00282 }, 299 { 8, 0x08808, 0x00464, 0x00282 }, 300 { 9, 0x08808, 0x00465, 0x00282 }, 301 { 10, 0x08808, 0x00466, 0x00282 }, 302 { 11, 0x08808, 0x00467, 0x00282 }, 303 { 12, 0x08808, 0x00468, 0x00282 }, 304 { 13, 0x08808, 0x00469, 0x00282 }, 305 { 14, 0x08808, 0x0046b, 0x00286 }, 306 307 { 36, 0x08804, 0x06225, 0x00287 }, 308 { 40, 0x08804, 0x06226, 0x00287 }, 309 { 44, 0x08804, 0x06227, 0x00287 }, 310 { 48, 0x08804, 0x06228, 0x00287 }, 311 { 52, 0x08804, 0x06229, 0x00287 }, 312 { 56, 0x08804, 0x0622a, 0x00287 }, 313 { 60, 0x08804, 0x0622b, 0x00287 }, 314 { 64, 0x08804, 0x0622c, 0x00287 }, 315 316 { 100, 0x08804, 0x02200, 0x00283 }, 317 { 104, 0x08804, 0x02201, 0x00283 }, 318 { 108, 0x08804, 0x02202, 0x00283 }, 319 { 112, 0x08804, 0x02203, 0x00283 }, 320 { 116, 0x08804, 0x02204, 0x00283 }, 321 { 120, 0x08804, 0x02205, 0x00283 }, 322 { 124, 0x08804, 0x02206, 0x00283 }, 323 { 128, 0x08804, 0x02207, 0x00283 }, 324 { 132, 0x08804, 0x02208, 0x00283 }, 325 { 136, 0x08804, 0x02209, 0x00283 }, 326 { 140, 0x08804, 0x0220a, 0x00283 }, 327 328 { 149, 0x08808, 0x02429, 0x00281 }, 329 { 153, 0x08808, 0x0242b, 0x00281 }, 330 { 157, 0x08808, 0x0242d, 0x00281 }, 331 { 161, 0x08808, 0x0242f, 0x00281 } 332}; 333 334static const struct usb2_config ural_config[URAL_N_TRANSFER] = { 335 [URAL_BULK_WR] = { 336 .type = UE_BULK, 337 .endpoint = UE_ADDR_ANY, 338 .direction = UE_DIR_OUT, 339 .mh.bufsize = (RAL_FRAME_SIZE + RAL_TX_DESC_SIZE + 4), 340 .mh.flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 341 .mh.callback = ural_bulk_write_callback, 342 .mh.timeout = 5000, /* ms */ 343 }, 344 [URAL_BULK_RD] = { 345 .type = UE_BULK, 346 .endpoint = UE_ADDR_ANY, 347 .direction = UE_DIR_IN, 348 .mh.bufsize = (RAL_FRAME_SIZE + RAL_RX_DESC_SIZE), 349 .mh.flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 350 .mh.callback = ural_bulk_read_callback, 351 }, 352}; 353 354static device_probe_t ural_match; 355static device_attach_t ural_attach; 356static device_detach_t ural_detach; 357 358static device_method_t ural_methods[] = { 359 /* Device interface */ 360 DEVMETHOD(device_probe, ural_match), 361 DEVMETHOD(device_attach, ural_attach), 362 DEVMETHOD(device_detach, ural_detach), 363 364 { 0, 0 } 365}; 366 367static driver_t ural_driver = { 368 .name = "ural", 369 .methods = ural_methods, 370 .size = sizeof(struct ural_softc), 371}; 372 373static devclass_t ural_devclass; 374 375DRIVER_MODULE(ural, ushub, ural_driver, ural_devclass, NULL, 0); 376MODULE_DEPEND(ural, usb2_wlan, 1, 1, 1); 377MODULE_DEPEND(ural, usb2_core, 1, 1, 1); 378MODULE_DEPEND(ural, wlan, 1, 1, 1); 379MODULE_DEPEND(ural, wlan_amrr, 1, 1, 1); 380 381static int 382ural_match(device_t self) 383{ 384 struct usb2_attach_arg *uaa = device_get_ivars(self); 385 386 if (uaa->usb2_mode != USB_MODE_HOST) 387 return (ENXIO); 388 if (uaa->info.bConfigIndex != 0) 389 return (ENXIO); 390 if (uaa->info.bIfaceIndex != RAL_IFACE_INDEX) 391 return (ENXIO); 392 393 return (usb2_lookup_id_by_uaa(ural_devs, sizeof(ural_devs), uaa)); 394} 395 396static int 397ural_attach(device_t self) 398{ 399 struct usb2_attach_arg *uaa = device_get_ivars(self); 400 struct ural_softc *sc = device_get_softc(self); 401 int error; 402 uint8_t iface_index; 403 404 device_set_usb2_desc(self); 405 sc->sc_udev = uaa->device; 406 sc->sc_dev = self; 407 408 mtx_init(&sc->sc_mtx, device_get_nameunit(self), 409 MTX_NETWORK_LOCK, MTX_DEF); 410 411 iface_index = RAL_IFACE_INDEX; 412 error = usb2_transfer_setup(uaa->device, 413 &iface_index, sc->sc_xfer, ural_config, 414 URAL_N_TRANSFER, sc, &sc->sc_mtx); 415 if (error) { 416 device_printf(self, "could not allocate USB transfers, " 417 "err=%s\n", usb2_errstr(error)); 418 goto detach; 419 } 420 error = usb2_proc_create(&sc->sc_tq, &sc->sc_mtx, 421 device_get_nameunit(self), USB_PRI_MED); 422 if (error) { 423 device_printf(self, "could not setup config thread!\n"); 424 goto detach; 425 } 426 427 /* fork rest of the attach code */ 428 RAL_LOCK(sc); 429 ural_queue_command(sc, ural_attach_post, 430 &sc->sc_synctask[0].hdr, 431 &sc->sc_synctask[1].hdr); 432 RAL_UNLOCK(sc); 433 return (0); 434 435detach: 436 ural_detach(self); 437 return (ENXIO); /* failure */ 438} 439 440static void 441ural_attach_post(struct usb2_proc_msg *pm) 442{ 443 struct ural_task *task = (struct ural_task *)pm; 444 struct ural_softc *sc = task->sc; 445 struct ifnet *ifp; 446 struct ieee80211com *ic; 447 uint8_t bands; 448 449 /* retrieve RT2570 rev. no */ 450 sc->asic_rev = ural_read(sc, RAL_MAC_CSR0); 451 452 /* retrieve MAC address and various other things from EEPROM */ 453 ural_read_eeprom(sc); 454 RAL_UNLOCK(sc); 455 456 device_printf(sc->sc_dev, "MAC/BBP RT2570 (rev 0x%02x), RF %s\n", 457 sc->asic_rev, ural_get_rf(sc->rf_rev)); 458 459 ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); 460 if (ifp == NULL) { 461 device_printf(sc->sc_dev, "can not if_alloc()\n"); 462 RAL_LOCK(sc); 463 return; 464 } 465 ic = ifp->if_l2com; 466 467 ifp->if_softc = sc; 468 if_initname(ifp, "ural", device_get_unit(sc->sc_dev)); 469 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 470 ifp->if_init = ural_init; 471 ifp->if_ioctl = ural_ioctl; 472 ifp->if_start = ural_start; 473 IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN); 474 ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN; 475 IFQ_SET_READY(&ifp->if_snd); 476 477 ic->ic_ifp = ifp; 478 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 479 IEEE80211_ADDR_COPY(ic->ic_myaddr, sc->sc_bssid); 480 481 /* set device capabilities */ 482 ic->ic_caps = 483 IEEE80211_C_STA /* station mode supported */ 484 | IEEE80211_C_IBSS /* IBSS mode supported */ 485 | IEEE80211_C_MONITOR /* monitor mode supported */ 486 | IEEE80211_C_HOSTAP /* HostAp mode supported */ 487 | IEEE80211_C_TXPMGT /* tx power management */ 488 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 489 | IEEE80211_C_SHSLOT /* short slot time supported */ 490 | IEEE80211_C_BGSCAN /* bg scanning supported */ 491 | IEEE80211_C_WPA /* 802.11i */ 492 ; 493 494 bands = 0; 495 setbit(&bands, IEEE80211_MODE_11B); 496 setbit(&bands, IEEE80211_MODE_11G); 497 if (sc->rf_rev == RAL_RF_5222) 498 setbit(&bands, IEEE80211_MODE_11A); 499 ieee80211_init_channels(ic, NULL, &bands); 500 501 ieee80211_ifattach(ic); 502 ic->ic_newassoc = ural_newassoc; 503 ic->ic_raw_xmit = ural_raw_xmit; 504 ic->ic_node_alloc = ural_node_alloc; 505 ic->ic_scan_start = ural_scan_start; 506 ic->ic_scan_end = ural_scan_end; 507 ic->ic_set_channel = ural_set_channel; 508 509 ic->ic_vap_create = ural_vap_create; 510 ic->ic_vap_delete = ural_vap_delete; 511 512 sc->sc_rates = ieee80211_get_ratetable(ic->ic_curchan); 513 514 bpfattach(ifp, DLT_IEEE802_11_RADIO, 515 sizeof (struct ieee80211_frame) + sizeof(sc->sc_txtap)); 516 517 sc->sc_rxtap_len = sizeof sc->sc_rxtap; 518 sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); 519 sc->sc_rxtap.wr_ihdr.it_present = htole32(RAL_RX_RADIOTAP_PRESENT); 520 521 sc->sc_txtap_len = sizeof sc->sc_txtap; 522 sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); 523 sc->sc_txtap.wt_ihdr.it_present = htole32(RAL_TX_RADIOTAP_PRESENT); 524 525 if (bootverbose) 526 ieee80211_announce(ic); 527 528 RAL_LOCK(sc); 529} 530 531static int 532ural_detach(device_t self) 533{ 534 struct ural_softc *sc = device_get_softc(self); 535 struct ifnet *ifp = sc->sc_ifp; 536 struct ieee80211com *ic = ifp->if_l2com; 537 538 /* wait for any post attach or other command to complete */ 539 usb2_proc_drain(&sc->sc_tq); 540 541 /* stop all USB transfers */ 542 usb2_transfer_unsetup(sc->sc_xfer, URAL_N_TRANSFER); 543 usb2_proc_free(&sc->sc_tq); 544 545 /* free TX list, if any */ 546 RAL_LOCK(sc); 547 ural_unsetup_tx_list(sc); 548 RAL_UNLOCK(sc); 549 550 if (ifp) { 551 bpfdetach(ifp); 552 ieee80211_ifdetach(ic); 553 if_free(ifp); 554 } 555 556 mtx_destroy(&sc->sc_mtx); 557 558 return (0); 559} 560 561static struct ieee80211vap * 562ural_vap_create(struct ieee80211com *ic, 563 const char name[IFNAMSIZ], int unit, int opmode, int flags, 564 const uint8_t bssid[IEEE80211_ADDR_LEN], 565 const uint8_t mac[IEEE80211_ADDR_LEN]) 566{ 567 struct ural_softc *sc = ic->ic_ifp->if_softc; 568 struct ural_vap *uvp; 569 struct ieee80211vap *vap; 570 571 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ 572 return NULL; 573 uvp = (struct ural_vap *) malloc(sizeof(struct ural_vap), 574 M_80211_VAP, M_NOWAIT | M_ZERO); 575 if (uvp == NULL) 576 return NULL; 577 vap = &uvp->vap; 578 /* enable s/w bmiss handling for sta mode */ 579 ieee80211_vap_setup(ic, vap, name, unit, opmode, 580 flags | IEEE80211_CLONE_NOBEACONS, bssid, mac); 581 582 /* override state transition machine */ 583 uvp->newstate = vap->iv_newstate; 584 vap->iv_newstate = ural_newstate; 585 586 uvp->sc = sc; 587 usb2_callout_init_mtx(&uvp->amrr_ch, &sc->sc_mtx, 0); 588 ieee80211_amrr_init(&uvp->amrr, vap, 589 IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD, 590 IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD, 591 1000 /* 1 sec */); 592 593 /* complete setup */ 594 ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status); 595 ic->ic_opmode = opmode; 596 return vap; 597} 598 599static void 600ural_vap_delete(struct ieee80211vap *vap) 601{ 602 struct ural_vap *uvp = URAL_VAP(vap); 603 604 usb2_callout_drain(&uvp->amrr_ch); 605 ieee80211_amrr_cleanup(&uvp->amrr); 606 ieee80211_vap_detach(vap); 607 free(uvp, M_80211_VAP); 608} 609 610static void 611ural_tx_free(struct ural_tx_data *data, int txerr) 612{ 613 struct ural_softc *sc = data->sc; 614 615 if (data->m != NULL) { 616 if (data->m->m_flags & M_TXCB) 617 ieee80211_process_callback(data->ni, data->m, 618 txerr ? ETIMEDOUT : 0); 619 m_freem(data->m); 620 data->m = NULL; 621 622 ieee80211_free_node(data->ni); 623 data->ni = NULL; 624 } 625 STAILQ_INSERT_TAIL(&sc->tx_free, data, next); 626 sc->tx_nfree++; 627} 628 629static void 630ural_setup_tx_list(struct ural_softc *sc) 631{ 632 struct ural_tx_data *data; 633 int i; 634 635 sc->tx_nfree = 0; 636 STAILQ_INIT(&sc->tx_q); 637 STAILQ_INIT(&sc->tx_free); 638 639 for (i = 0; i < RAL_TX_LIST_COUNT; i++) { 640 data = &sc->tx_data[i]; 641 642 data->sc = sc; 643 STAILQ_INSERT_TAIL(&sc->tx_free, data, next); 644 sc->tx_nfree++; 645 } 646} 647 648static void 649ural_unsetup_tx_list(struct ural_softc *sc) 650{ 651 struct ural_tx_data *data; 652 int i; 653 654 /* make sure any subsequent use of the queues will fail */ 655 sc->tx_nfree = 0; 656 STAILQ_INIT(&sc->tx_q); 657 STAILQ_INIT(&sc->tx_free); 658 659 /* free up all node references and mbufs */ 660 for (i = 0; i < RAL_TX_LIST_COUNT; i++) { 661 data = &sc->tx_data[i]; 662 663 if (data->m != NULL) { 664 m_freem(data->m); 665 data->m = NULL; 666 } 667 if (data->ni != NULL) { 668 ieee80211_free_node(data->ni); 669 data->ni = NULL; 670 } 671 } 672} 673 674static void 675ural_task(struct usb2_proc_msg *pm) 676{ 677 struct ural_task *task = (struct ural_task *)pm; 678 struct ural_softc *sc = task->sc; 679 struct ifnet *ifp = sc->sc_ifp; 680 struct ieee80211com *ic = ifp->if_l2com; 681 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 682 struct ural_vap *uvp = URAL_VAP(vap); 683 const struct ieee80211_txparam *tp; 684 enum ieee80211_state ostate; 685 struct ieee80211_node *ni; 686 struct mbuf *m; 687 688 ostate = vap->iv_state; 689 690 switch (sc->sc_state) { 691 case IEEE80211_S_INIT: 692 if (ostate == IEEE80211_S_RUN) { 693 /* abort TSF synchronization */ 694 ural_write(sc, RAL_TXRX_CSR19, 0); 695 696 /* force tx led to stop blinking */ 697 ural_write(sc, RAL_MAC_CSR20, 0); 698 } 699 break; 700 701 case IEEE80211_S_RUN: 702 ni = vap->iv_bss; 703 704 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 705 ural_update_slot(ic->ic_ifp); 706 ural_set_txpreamble(sc); 707 ural_set_basicrates(sc, ic->ic_bsschan); 708 IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid); 709 ural_set_bssid(sc, sc->sc_bssid); 710 } 711 712 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 713 vap->iv_opmode == IEEE80211_M_IBSS) { 714 m = ieee80211_beacon_alloc(ni, &uvp->bo); 715 if (m == NULL) { 716 device_printf(sc->sc_dev, 717 "could not allocate beacon\n"); 718 return; 719 } 720 721 if (ural_tx_bcn(sc, m, ni) != 0) { 722 device_printf(sc->sc_dev, 723 "could not send beacon\n"); 724 return; 725 } 726 } 727 728 /* make tx led blink on tx (controlled by ASIC) */ 729 ural_write(sc, RAL_MAC_CSR20, 1); 730 731 if (vap->iv_opmode != IEEE80211_M_MONITOR) 732 ural_enable_tsf_sync(sc); 733 734 /* enable automatic rate adaptation */ 735 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_bsschan)]; 736 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) 737 ural_amrr_start(sc, ni); 738 739 break; 740 741 default: 742 break; 743 } 744 745 RAL_UNLOCK(sc); 746 IEEE80211_LOCK(ic); 747 uvp->newstate(vap, sc->sc_state, sc->sc_arg); 748 if (vap->iv_newstate_cb != NULL) 749 vap->iv_newstate_cb(vap, sc->sc_state, sc->sc_arg); 750 IEEE80211_UNLOCK(ic); 751 RAL_LOCK(sc); 752} 753 754static void 755ural_scantask(struct usb2_proc_msg *pm) 756{ 757 struct ural_task *task = (struct ural_task *)pm; 758 struct ural_softc *sc = task->sc; 759 struct ifnet *ifp = sc->sc_ifp; 760 struct ieee80211com *ic = ifp->if_l2com; 761 762 RAL_LOCK_ASSERT(sc, MA_OWNED); 763 764 switch (sc->sc_scan_action) { 765 case URAL_SCAN_START: 766 /* abort TSF synchronization */ 767 DPRINTF("starting scan\n"); 768 ural_write(sc, RAL_TXRX_CSR19, 0); 769 ural_set_bssid(sc, ifp->if_broadcastaddr); 770 break; 771 772 case URAL_SET_CHANNEL: 773 ural_set_chan(sc, ic->ic_curchan); 774 break; 775 776 default: /* URAL_SCAN_END */ 777 DPRINTF("stopping scan\n"); 778 ural_enable_tsf_sync(sc); 779 ural_set_bssid(sc, sc->sc_bssid); 780 break; 781 } 782} 783 784static int 785ural_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 786{ 787 struct ural_vap *uvp = URAL_VAP(vap); 788 struct ieee80211com *ic = vap->iv_ic; 789 struct ural_softc *sc = ic->ic_ifp->if_softc; 790 791 DPRINTF("%s -> %s\n", 792 ieee80211_state_name[vap->iv_state], 793 ieee80211_state_name[nstate]); 794 795 RAL_LOCK(sc); 796 usb2_callout_stop(&uvp->amrr_ch); 797 798 /* do it in a process context */ 799 sc->sc_state = nstate; 800 sc->sc_arg = arg; 801 RAL_UNLOCK(sc); 802 803 if (nstate == IEEE80211_S_INIT) { 804 uvp->newstate(vap, nstate, arg); 805 return 0; 806 } else { 807 RAL_LOCK(sc); 808 ural_queue_command(sc, ural_task, &sc->sc_task[0].hdr, 809 &sc->sc_task[1].hdr); 810 RAL_UNLOCK(sc); 811 return EINPROGRESS; 812 } 813} 814 815 816static void 817ural_bulk_write_callback(struct usb2_xfer *xfer) 818{ 819 struct ural_softc *sc = xfer->priv_sc; 820 struct ifnet *ifp = sc->sc_ifp; 821 struct ieee80211com *ic = ifp->if_l2com; 822 struct ieee80211_channel *c = ic->ic_curchan; 823 struct ural_tx_data *data; 824 struct mbuf *m; 825 unsigned int len; 826 827 switch (USB_GET_STATE(xfer)) { 828 case USB_ST_TRANSFERRED: 829 DPRINTFN(11, "transfer complete, %d bytes\n", xfer->actlen); 830 831 /* free resources */ 832 data = xfer->priv_fifo; 833 ural_tx_free(data, 0); 834 xfer->priv_fifo = NULL; 835 836 ifp->if_opackets++; 837 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 838 839 /* FALLTHROUGH */ 840 case USB_ST_SETUP: 841tr_setup: 842 data = STAILQ_FIRST(&sc->tx_q); 843 if (data) { 844 STAILQ_REMOVE_HEAD(&sc->tx_q, next); 845 m = data->m; 846 847 if (m->m_pkthdr.len > (RAL_FRAME_SIZE + RAL_TX_DESC_SIZE)) { 848 DPRINTFN(0, "data overflow, %u bytes\n", 849 m->m_pkthdr.len); 850 m->m_pkthdr.len = (RAL_FRAME_SIZE + RAL_TX_DESC_SIZE); 851 } 852 usb2_copy_in(xfer->frbuffers, 0, &data->desc, 853 RAL_TX_DESC_SIZE); 854 usb2_m_copy_in(xfer->frbuffers, RAL_TX_DESC_SIZE, m, 0, 855 m->m_pkthdr.len); 856 857 if (bpf_peers_present(ifp->if_bpf)) { 858 struct ural_tx_radiotap_header *tap = &sc->sc_txtap; 859 860 tap->wt_flags = 0; 861 tap->wt_rate = data->rate; 862 tap->wt_chan_freq = htole16(c->ic_freq); 863 tap->wt_chan_flags = htole16(c->ic_flags); 864 tap->wt_antenna = sc->tx_ant; 865 866 bpf_mtap2(ifp->if_bpf, tap, sc->sc_txtap_len, m); 867 } 868 869 /* xfer length needs to be a multiple of two! */ 870 len = (RAL_TX_DESC_SIZE + m->m_pkthdr.len + 1) & ~1; 871 if ((len % 64) == 0) 872 len += 2; 873 874 DPRINTFN(11, "sending frame len=%u xferlen=%u\n", 875 m->m_pkthdr.len, len); 876 877 xfer->frlengths[0] = len; 878 xfer->priv_fifo = data; 879 880 usb2_start_hardware(xfer); 881 } 882 break; 883 884 default: /* Error */ 885 DPRINTFN(11, "transfer error, %s\n", 886 usb2_errstr(xfer->error)); 887 888 ifp->if_oerrors++; 889 data = xfer->priv_fifo; 890 if (data != NULL) { 891 ural_tx_free(data, xfer->error); 892 xfer->priv_fifo = NULL; 893 } 894 895 if (xfer->error == USB_ERR_STALLED) { 896 /* try to clear stall first */ 897 xfer->flags.stall_pipe = 1; 898 goto tr_setup; 899 } 900 if (xfer->error == USB_ERR_TIMEOUT) 901 device_printf(sc->sc_dev, "device timeout\n"); 902 break; 903 } 904} 905 906static void 907ural_bulk_read_callback(struct usb2_xfer *xfer) 908{ 909 struct ural_softc *sc = xfer->priv_sc; 910 struct ifnet *ifp = sc->sc_ifp; 911 struct ieee80211com *ic = ifp->if_l2com; 912 struct ieee80211_node *ni; 913 struct mbuf *m = NULL; 914 uint32_t flags; 915 uint8_t rssi = 0; 916 unsigned int len; 917 918 switch (USB_GET_STATE(xfer)) { 919 case USB_ST_TRANSFERRED: 920 921 DPRINTFN(15, "rx done, actlen=%d\n", xfer->actlen); 922 923 len = xfer->actlen; 924 if (len < RAL_RX_DESC_SIZE + IEEE80211_MIN_LEN) { 925 DPRINTF("%s: xfer too short %d\n", 926 device_get_nameunit(sc->sc_dev), len); 927 ifp->if_ierrors++; 928 goto tr_setup; 929 } 930 931 len -= RAL_RX_DESC_SIZE; 932 /* rx descriptor is located at the end */ 933 usb2_copy_out(xfer->frbuffers, len, &sc->sc_rx_desc, 934 RAL_RX_DESC_SIZE); 935 936 rssi = URAL_RSSI(sc->sc_rx_desc.rssi); 937 flags = le32toh(sc->sc_rx_desc.flags); 938 if (flags & (RAL_RX_PHY_ERROR | RAL_RX_CRC_ERROR)) { 939 /* 940 * This should not happen since we did not 941 * request to receive those frames when we 942 * filled RAL_TXRX_CSR2: 943 */ 944 DPRINTFN(5, "PHY or CRC error\n"); 945 ifp->if_ierrors++; 946 goto tr_setup; 947 } 948 949 m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); 950 if (m == NULL) { 951 DPRINTF("could not allocate mbuf\n"); 952 ifp->if_ierrors++; 953 goto tr_setup; 954 } 955 usb2_copy_out(xfer->frbuffers, 0, mtod(m, uint8_t *), len); 956 957 /* finalize mbuf */ 958 m->m_pkthdr.rcvif = ifp; 959 m->m_pkthdr.len = m->m_len = (flags >> 16) & 0xfff; 960 961 if (bpf_peers_present(ifp->if_bpf)) { 962 struct ural_rx_radiotap_header *tap = &sc->sc_rxtap; 963 964 tap->wr_flags = IEEE80211_RADIOTAP_F_FCS; 965 tap->wr_rate = ieee80211_plcp2rate(sc->sc_rx_desc.rate, 966 (flags & RAL_RX_OFDM) ? 967 IEEE80211_T_OFDM : IEEE80211_T_CCK); 968 tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq); 969 tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags); 970 tap->wr_antenna = sc->rx_ant; 971 tap->wr_antsignal = rssi; 972 973 bpf_mtap2(ifp->if_bpf, tap, sc->sc_rxtap_len, m); 974 } 975 /* Strip trailing 802.11 MAC FCS. */ 976 m_adj(m, -IEEE80211_CRC_LEN); 977 978 /* FALLTHROUGH */ 979 case USB_ST_SETUP: 980tr_setup: 981 xfer->frlengths[0] = xfer->max_data_length; 982 usb2_start_hardware(xfer); 983 984 /* 985 * At the end of a USB callback it is always safe to unlock 986 * the private mutex of a device! That is why we do the 987 * "ieee80211_input" here, and not some lines up! 988 */ 989 if (m) { 990 RAL_UNLOCK(sc); 991 ni = ieee80211_find_rxnode(ic, 992 mtod(m, struct ieee80211_frame_min *)); 993 if (ni != NULL) { 994 (void) ieee80211_input(ni, m, rssi, 995 RAL_NOISE_FLOOR, 0); 996 ieee80211_free_node(ni); 997 } else 998 (void) ieee80211_input_all(ic, m, rssi, 999 RAL_NOISE_FLOOR, 0); 1000 RAL_LOCK(sc); 1001 } 1002 return; 1003 1004 default: /* Error */ 1005 if (xfer->error != USB_ERR_CANCELLED) { 1006 /* try to clear stall first */ 1007 xfer->flags.stall_pipe = 1; 1008 goto tr_setup; 1009 } 1010 return; 1011 } 1012} 1013 1014static uint8_t 1015ural_plcp_signal(int rate) 1016{ 1017 switch (rate) { 1018 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ 1019 case 12: return 0xb; 1020 case 18: return 0xf; 1021 case 24: return 0xa; 1022 case 36: return 0xe; 1023 case 48: return 0x9; 1024 case 72: return 0xd; 1025 case 96: return 0x8; 1026 case 108: return 0xc; 1027 1028 /* CCK rates (NB: not IEEE std, device-specific) */ 1029 case 2: return 0x0; 1030 case 4: return 0x1; 1031 case 11: return 0x2; 1032 case 22: return 0x3; 1033 } 1034 return 0xff; /* XXX unsupported/unknown rate */ 1035} 1036 1037static void 1038ural_setup_tx_desc(struct ural_softc *sc, struct ural_tx_desc *desc, 1039 uint32_t flags, int len, int rate) 1040{ 1041 struct ifnet *ifp = sc->sc_ifp; 1042 struct ieee80211com *ic = ifp->if_l2com; 1043 uint16_t plcp_length; 1044 int remainder; 1045 1046 desc->flags = htole32(flags); 1047 desc->flags |= htole32(RAL_TX_NEWSEQ); 1048 desc->flags |= htole32(len << 16); 1049 1050 desc->wme = htole16(RAL_AIFSN(2) | RAL_LOGCWMIN(3) | RAL_LOGCWMAX(5)); 1051 desc->wme |= htole16(RAL_IVOFFSET(sizeof (struct ieee80211_frame))); 1052 1053 /* setup PLCP fields */ 1054 desc->plcp_signal = ural_plcp_signal(rate); 1055 desc->plcp_service = 4; 1056 1057 len += IEEE80211_CRC_LEN; 1058 if (ieee80211_rate2phytype(sc->sc_rates, rate) == IEEE80211_T_OFDM) { 1059 desc->flags |= htole32(RAL_TX_OFDM); 1060 1061 plcp_length = len & 0xfff; 1062 desc->plcp_length_hi = plcp_length >> 6; 1063 desc->plcp_length_lo = plcp_length & 0x3f; 1064 } else { 1065 plcp_length = (16 * len + rate - 1) / rate; 1066 if (rate == 22) { 1067 remainder = (16 * len) % 22; 1068 if (remainder != 0 && remainder < 7) 1069 desc->plcp_service |= RAL_PLCP_LENGEXT; 1070 } 1071 desc->plcp_length_hi = plcp_length >> 8; 1072 desc->plcp_length_lo = plcp_length & 0xff; 1073 1074 if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 1075 desc->plcp_signal |= 0x08; 1076 } 1077 1078 desc->iv = 0; 1079 desc->eiv = 0; 1080} 1081 1082#define RAL_TX_TIMEOUT 5000 1083 1084static int 1085ural_tx_bcn(struct ural_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) 1086{ 1087 struct ieee80211vap *vap = ni->ni_vap; 1088 struct ieee80211com *ic = ni->ni_ic; 1089 struct ifnet *ifp = sc->sc_ifp; 1090 const struct ieee80211_txparam *tp; 1091 struct ural_tx_data *data; 1092 1093 if (sc->tx_nfree == 0) { 1094 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1095 m_freem(m0); 1096 ieee80211_free_node(ni); 1097 return EIO; 1098 } 1099 data = STAILQ_FIRST(&sc->tx_free); 1100 STAILQ_REMOVE_HEAD(&sc->tx_free, next); 1101 sc->tx_nfree--; 1102 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_bsschan)]; 1103 1104 data->m = m0; 1105 data->ni = ni; 1106 data->rate = tp->mgmtrate; 1107 1108 ural_setup_tx_desc(sc, &data->desc, 1109 RAL_TX_IFS_NEWBACKOFF | RAL_TX_TIMESTAMP, m0->m_pkthdr.len, 1110 tp->mgmtrate); 1111 1112 DPRINTFN(10, "sending beacon frame len=%u rate=%u\n", 1113 m0->m_pkthdr.len, tp->mgmtrate); 1114 1115 STAILQ_INSERT_TAIL(&sc->tx_q, data, next); 1116 usb2_transfer_start(sc->sc_xfer[URAL_BULK_WR]); 1117 1118 return (0); 1119} 1120 1121static int 1122ural_tx_mgt(struct ural_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) 1123{ 1124 struct ieee80211vap *vap = ni->ni_vap; 1125 struct ieee80211com *ic = ni->ni_ic; 1126 const struct ieee80211_txparam *tp; 1127 struct ural_tx_data *data; 1128 struct ieee80211_frame *wh; 1129 struct ieee80211_key *k; 1130 uint32_t flags; 1131 uint16_t dur; 1132 1133 RAL_LOCK_ASSERT(sc, MA_OWNED); 1134 1135 data = STAILQ_FIRST(&sc->tx_free); 1136 STAILQ_REMOVE_HEAD(&sc->tx_free, next); 1137 sc->tx_nfree--; 1138 1139 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 1140 1141 wh = mtod(m0, struct ieee80211_frame *); 1142 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1143 k = ieee80211_crypto_encap(ni, m0); 1144 if (k == NULL) { 1145 m_freem(m0); 1146 return ENOBUFS; 1147 } 1148 wh = mtod(m0, struct ieee80211_frame *); 1149 } 1150 1151 data->m = m0; 1152 data->ni = ni; 1153 data->rate = tp->mgmtrate; 1154 1155 flags = 0; 1156 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1157 flags |= RAL_TX_ACK; 1158 1159 dur = ieee80211_ack_duration(sc->sc_rates, tp->mgmtrate, 1160 ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1161 *(uint16_t *)wh->i_dur = htole16(dur); 1162 1163 /* tell hardware to add timestamp for probe responses */ 1164 if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == 1165 IEEE80211_FC0_TYPE_MGT && 1166 (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == 1167 IEEE80211_FC0_SUBTYPE_PROBE_RESP) 1168 flags |= RAL_TX_TIMESTAMP; 1169 } 1170 1171 ural_setup_tx_desc(sc, &data->desc, flags, m0->m_pkthdr.len, tp->mgmtrate); 1172 1173 DPRINTFN(10, "sending mgt frame len=%u rate=%u\n", 1174 m0->m_pkthdr.len, tp->mgmtrate); 1175 1176 STAILQ_INSERT_TAIL(&sc->tx_q, data, next); 1177 usb2_transfer_start(sc->sc_xfer[URAL_BULK_WR]); 1178 1179 return 0; 1180} 1181 1182static int 1183ural_sendprot(struct ural_softc *sc, 1184 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 1185{ 1186 struct ieee80211com *ic = ni->ni_ic; 1187 const struct ieee80211_frame *wh; 1188 struct ural_tx_data *data; 1189 struct mbuf *mprot; 1190 int protrate, ackrate, pktlen, flags, isshort; 1191 uint16_t dur; 1192 1193 KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, 1194 ("protection %d", prot)); 1195 1196 wh = mtod(m, const struct ieee80211_frame *); 1197 pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; 1198 1199 protrate = ieee80211_ctl_rate(sc->sc_rates, rate); 1200 ackrate = ieee80211_ack_rate(sc->sc_rates, rate); 1201 1202 isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; 1203 dur = ieee80211_compute_duration(sc->sc_rates, pktlen, rate, isshort); 1204 + ieee80211_ack_duration(sc->sc_rates, rate, isshort); 1205 flags = RAL_TX_RETRY(7); 1206 if (prot == IEEE80211_PROT_RTSCTS) { 1207 /* NB: CTS is the same size as an ACK */ 1208 dur += ieee80211_ack_duration(sc->sc_rates, rate, isshort); 1209 flags |= RAL_TX_ACK; 1210 mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); 1211 } else { 1212 mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); 1213 } 1214 if (mprot == NULL) { 1215 /* XXX stat + msg */ 1216 return ENOBUFS; 1217 } 1218 data = STAILQ_FIRST(&sc->tx_free); 1219 STAILQ_REMOVE_HEAD(&sc->tx_free, next); 1220 sc->tx_nfree--; 1221 1222 data->m = mprot; 1223 data->ni = ieee80211_ref_node(ni); 1224 data->rate = protrate; 1225 ural_setup_tx_desc(sc, &data->desc, flags, mprot->m_pkthdr.len, protrate); 1226 1227 STAILQ_INSERT_TAIL(&sc->tx_q, data, next); 1228 usb2_transfer_start(sc->sc_xfer[URAL_BULK_WR]); 1229 1230 return 0; 1231} 1232 1233static int 1234ural_tx_raw(struct ural_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, 1235 const struct ieee80211_bpf_params *params) 1236{ 1237 struct ural_tx_data *data; 1238 uint32_t flags; 1239 int error; 1240 int rate; 1241 1242 RAL_LOCK_ASSERT(sc, MA_OWNED); 1243 KASSERT(params != NULL, ("no raw xmit params")); 1244 1245 data = STAILQ_FIRST(&sc->tx_free); 1246 STAILQ_REMOVE_HEAD(&sc->tx_free, next); 1247 sc->tx_nfree--; 1248 1249 rate = params->ibp_rate0 & IEEE80211_RATE_VAL; 1250 /* XXX validate */ 1251 if (rate == 0) { 1252 m_freem(m0); 1253 return EINVAL; 1254 } 1255 flags = 0; 1256 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 1257 flags |= RAL_TX_ACK; 1258 if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) { 1259 error = ural_sendprot(sc, m0, ni, 1260 params->ibp_flags & IEEE80211_BPF_RTS ? 1261 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY, 1262 rate); 1263 if (error) { 1264 m_freem(m0); 1265 return error; 1266 } 1267 flags |= RAL_TX_IFS_SIFS; 1268 } 1269 1270 data->m = m0; 1271 data->ni = ni; 1272 data->rate = rate; 1273 1274 /* XXX need to setup descriptor ourself */ 1275 ural_setup_tx_desc(sc, &data->desc, flags, m0->m_pkthdr.len, rate); 1276 1277 DPRINTFN(10, "sending raw frame len=%u rate=%u\n", 1278 m0->m_pkthdr.len, rate); 1279 1280 STAILQ_INSERT_TAIL(&sc->tx_q, data, next); 1281 usb2_transfer_start(sc->sc_xfer[URAL_BULK_WR]); 1282 1283 return 0; 1284} 1285 1286static int 1287ural_tx_data(struct ural_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) 1288{ 1289 struct ieee80211vap *vap = ni->ni_vap; 1290 struct ieee80211com *ic = ni->ni_ic; 1291 struct ural_tx_data *data; 1292 struct ieee80211_frame *wh; 1293 const struct ieee80211_txparam *tp; 1294 struct ieee80211_key *k; 1295 uint32_t flags = 0; 1296 uint16_t dur; 1297 int error, rate; 1298 1299 RAL_LOCK_ASSERT(sc, MA_OWNED); 1300 1301 wh = mtod(m0, struct ieee80211_frame *); 1302 1303 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 1304 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 1305 rate = tp->mcastrate; 1306 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 1307 rate = tp->ucastrate; 1308 else 1309 rate = ni->ni_txrate; 1310 1311 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 1312 k = ieee80211_crypto_encap(ni, m0); 1313 if (k == NULL) { 1314 m_freem(m0); 1315 return ENOBUFS; 1316 } 1317 /* packet header may have moved, reset our local pointer */ 1318 wh = mtod(m0, struct ieee80211_frame *); 1319 } 1320 1321 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1322 int prot = IEEE80211_PROT_NONE; 1323 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) 1324 prot = IEEE80211_PROT_RTSCTS; 1325 else if ((ic->ic_flags & IEEE80211_F_USEPROT) && 1326 ieee80211_rate2phytype(sc->sc_rates, rate) == IEEE80211_T_OFDM) 1327 prot = ic->ic_protmode; 1328 if (prot != IEEE80211_PROT_NONE) { 1329 error = ural_sendprot(sc, m0, ni, prot, rate); 1330 if (error) { 1331 m_freem(m0); 1332 return error; 1333 } 1334 flags |= RAL_TX_IFS_SIFS; 1335 } 1336 } 1337 1338 data = STAILQ_FIRST(&sc->tx_free); 1339 STAILQ_REMOVE_HEAD(&sc->tx_free, next); 1340 sc->tx_nfree--; 1341 1342 data->m = m0; 1343 data->ni = ni; 1344 data->rate = rate; 1345 1346 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1347 flags |= RAL_TX_ACK; 1348 flags |= RAL_TX_RETRY(7); 1349 1350 dur = ieee80211_ack_duration(sc->sc_rates, rate, 1351 ic->ic_flags & IEEE80211_F_SHPREAMBLE); 1352 *(uint16_t *)wh->i_dur = htole16(dur); 1353 } 1354 1355 ural_setup_tx_desc(sc, &data->desc, flags, m0->m_pkthdr.len, rate); 1356 1357 DPRINTFN(10, "sending data frame len=%u rate=%u\n", 1358 m0->m_pkthdr.len, rate); 1359 1360 STAILQ_INSERT_TAIL(&sc->tx_q, data, next); 1361 usb2_transfer_start(sc->sc_xfer[URAL_BULK_WR]); 1362 1363 return 0; 1364} 1365 1366static void 1367ural_start(struct ifnet *ifp) 1368{ 1369 struct ural_softc *sc = ifp->if_softc; 1370 struct ieee80211_node *ni; 1371 struct mbuf *m; 1372 1373 RAL_LOCK(sc); 1374 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 1375 RAL_UNLOCK(sc); 1376 return; 1377 } 1378 for (;;) { 1379 IFQ_DRV_DEQUEUE(&ifp->if_snd, m); 1380 if (m == NULL) 1381 break; 1382 if (sc->tx_nfree == 0) { 1383 IFQ_DRV_PREPEND(&ifp->if_snd, m); 1384 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 1385 break; 1386 } 1387 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; 1388 m = ieee80211_encap(ni, m); 1389 if (m == NULL) { 1390 ieee80211_free_node(ni); 1391 continue; 1392 } 1393 if (ural_tx_data(sc, m, ni) != 0) { 1394 ieee80211_free_node(ni); 1395 ifp->if_oerrors++; 1396 break; 1397 } 1398 } 1399 RAL_UNLOCK(sc); 1400} 1401 1402static int 1403ural_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 1404{ 1405 struct ural_softc *sc = ifp->if_softc; 1406 struct ieee80211com *ic = ifp->if_l2com; 1407 struct ifreq *ifr = (struct ifreq *) data; 1408 int error = 0, startall = 0; 1409 1410 switch (cmd) { 1411 case SIOCSIFFLAGS: 1412 RAL_LOCK(sc); 1413 if (ifp->if_flags & IFF_UP) { 1414 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 1415 ural_queue_command(sc, ural_init_task, 1416 &sc->sc_synctask[0].hdr, 1417 &sc->sc_synctask[1].hdr); 1418 startall = 1; 1419 } else 1420 ural_queue_command(sc, ural_promisctask, 1421 &sc->sc_promisctask[0].hdr, 1422 &sc->sc_promisctask[1].hdr); 1423 } else { 1424 if (ifp->if_drv_flags & IFF_DRV_RUNNING) { 1425 ural_queue_command(sc, ural_stop_task, 1426 &sc->sc_synctask[0].hdr, 1427 &sc->sc_synctask[1].hdr); 1428 } 1429 } 1430 RAL_UNLOCK(sc); 1431 if (startall) 1432 ieee80211_start_all(ic); 1433 break; 1434 case SIOCGIFMEDIA: 1435 case SIOCSIFMEDIA: 1436 error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); 1437 break; 1438 default: 1439 error = ether_ioctl(ifp, cmd, data); 1440 break; 1441 } 1442 return error; 1443} 1444 1445static void 1446ural_set_testmode(struct ural_softc *sc) 1447{ 1448 struct usb2_device_request req; 1449 usb2_error_t error; 1450 1451 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1452 req.bRequest = RAL_VENDOR_REQUEST; 1453 USETW(req.wValue, 4); 1454 USETW(req.wIndex, 1); 1455 USETW(req.wLength, 0); 1456 1457 error = ural_do_request(sc, &req, NULL); 1458 if (error != 0) { 1459 device_printf(sc->sc_dev, "could not set test mode: %s\n", 1460 usb2_errstr(error)); 1461 } 1462} 1463 1464static void 1465ural_eeprom_read(struct ural_softc *sc, uint16_t addr, void *buf, int len) 1466{ 1467 struct usb2_device_request req; 1468 usb2_error_t error; 1469 1470 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1471 req.bRequest = RAL_READ_EEPROM; 1472 USETW(req.wValue, 0); 1473 USETW(req.wIndex, addr); 1474 USETW(req.wLength, len); 1475 1476 error = ural_do_request(sc, &req, buf); 1477 if (error != 0) { 1478 device_printf(sc->sc_dev, "could not read EEPROM: %s\n", 1479 usb2_errstr(error)); 1480 } 1481} 1482 1483static uint16_t 1484ural_read(struct ural_softc *sc, uint16_t reg) 1485{ 1486 struct usb2_device_request req; 1487 usb2_error_t error; 1488 uint16_t val; 1489 1490 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1491 req.bRequest = RAL_READ_MAC; 1492 USETW(req.wValue, 0); 1493 USETW(req.wIndex, reg); 1494 USETW(req.wLength, sizeof (uint16_t)); 1495 1496 error = ural_do_request(sc, &req, &val); 1497 if (error != 0) { 1498 device_printf(sc->sc_dev, "could not read MAC register: %s\n", 1499 usb2_errstr(error)); 1500 return 0; 1501 } 1502 1503 return le16toh(val); 1504} 1505 1506static void 1507ural_read_multi(struct ural_softc *sc, uint16_t reg, void *buf, int len) 1508{ 1509 struct usb2_device_request req; 1510 usb2_error_t error; 1511 1512 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1513 req.bRequest = RAL_READ_MULTI_MAC; 1514 USETW(req.wValue, 0); 1515 USETW(req.wIndex, reg); 1516 USETW(req.wLength, len); 1517 1518 error = ural_do_request(sc, &req, buf); 1519 if (error != 0) { 1520 device_printf(sc->sc_dev, "could not read MAC register: %s\n", 1521 usb2_errstr(error)); 1522 } 1523} 1524 1525static void 1526ural_write(struct ural_softc *sc, uint16_t reg, uint16_t val) 1527{ 1528 struct usb2_device_request req; 1529 usb2_error_t error; 1530 1531 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1532 req.bRequest = RAL_WRITE_MAC; 1533 USETW(req.wValue, val); 1534 USETW(req.wIndex, reg); 1535 USETW(req.wLength, 0); 1536 1537 error = ural_do_request(sc, &req, NULL); 1538 if (error != 0) { 1539 device_printf(sc->sc_dev, "could not write MAC register: %s\n", 1540 usb2_errstr(error)); 1541 } 1542} 1543 1544static void 1545ural_write_multi(struct ural_softc *sc, uint16_t reg, void *buf, int len) 1546{ 1547 struct usb2_device_request req; 1548 usb2_error_t error; 1549 1550 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1551 req.bRequest = RAL_WRITE_MULTI_MAC; 1552 USETW(req.wValue, 0); 1553 USETW(req.wIndex, reg); 1554 USETW(req.wLength, len); 1555 1556 error = ural_do_request(sc, &req, buf); 1557 if (error != 0) { 1558 device_printf(sc->sc_dev, "could not write MAC register: %s\n", 1559 usb2_errstr(error)); 1560 } 1561} 1562 1563static void 1564ural_bbp_write(struct ural_softc *sc, uint8_t reg, uint8_t val) 1565{ 1566 uint16_t tmp; 1567 int ntries; 1568 1569 for (ntries = 0; ntries < 5; ntries++) { 1570 if (!(ural_read(sc, RAL_PHY_CSR8) & RAL_BBP_BUSY)) 1571 break; 1572 } 1573 if (ntries == 5) { 1574 device_printf(sc->sc_dev, "could not write to BBP\n"); 1575 return; 1576 } 1577 1578 tmp = reg << 8 | val; 1579 ural_write(sc, RAL_PHY_CSR7, tmp); 1580} 1581 1582static uint8_t 1583ural_bbp_read(struct ural_softc *sc, uint8_t reg) 1584{ 1585 uint16_t val; 1586 int ntries; 1587 1588 val = RAL_BBP_WRITE | reg << 8; 1589 ural_write(sc, RAL_PHY_CSR7, val); 1590 1591 for (ntries = 0; ntries < 5; ntries++) { 1592 if (!(ural_read(sc, RAL_PHY_CSR8) & RAL_BBP_BUSY)) 1593 break; 1594 } 1595 if (ntries == 5) { 1596 device_printf(sc->sc_dev, "could not read BBP\n"); 1597 return 0; 1598 } 1599 1600 return ural_read(sc, RAL_PHY_CSR7) & 0xff; 1601} 1602 1603static void 1604ural_rf_write(struct ural_softc *sc, uint8_t reg, uint32_t val) 1605{ 1606 uint32_t tmp; 1607 int ntries; 1608 1609 for (ntries = 0; ntries < 5; ntries++) { 1610 if (!(ural_read(sc, RAL_PHY_CSR10) & RAL_RF_LOBUSY)) 1611 break; 1612 } 1613 if (ntries == 5) { 1614 device_printf(sc->sc_dev, "could not write to RF\n"); 1615 return; 1616 } 1617 1618 tmp = RAL_RF_BUSY | RAL_RF_20BIT | (val & 0xfffff) << 2 | (reg & 0x3); 1619 ural_write(sc, RAL_PHY_CSR9, tmp & 0xffff); 1620 ural_write(sc, RAL_PHY_CSR10, tmp >> 16); 1621 1622 /* remember last written value in sc */ 1623 sc->rf_regs[reg] = val; 1624 1625 DPRINTFN(15, "RF R[%u] <- 0x%05x\n", reg & 0x3, val & 0xfffff); 1626} 1627 1628/* ARGUSED */ 1629static struct ieee80211_node * 1630ural_node_alloc(struct ieee80211vap *vap __unused, 1631 const uint8_t mac[IEEE80211_ADDR_LEN] __unused) 1632{ 1633 struct ural_node *un; 1634 1635 un = malloc(sizeof(struct ural_node), M_80211_NODE, M_NOWAIT | M_ZERO); 1636 return un != NULL ? &un->ni : NULL; 1637} 1638 1639static void 1640ural_newassoc(struct ieee80211_node *ni, int isnew) 1641{ 1642 struct ieee80211vap *vap = ni->ni_vap; 1643 1644 ieee80211_amrr_node_init(&URAL_VAP(vap)->amrr, &URAL_NODE(ni)->amn, ni); 1645} 1646 1647static void 1648ural_scan_start(struct ieee80211com *ic) 1649{ 1650 struct ural_softc *sc = ic->ic_ifp->if_softc; 1651 1652 RAL_LOCK(sc); 1653 /* do it in a process context */ 1654 sc->sc_scan_action = URAL_SCAN_START; 1655 ural_queue_command(sc, ural_scantask, 1656 &sc->sc_scantask[0].hdr, &sc->sc_scantask[1].hdr); 1657 RAL_UNLOCK(sc); 1658 1659} 1660 1661static void 1662ural_scan_end(struct ieee80211com *ic) 1663{ 1664 struct ural_softc *sc = ic->ic_ifp->if_softc; 1665 1666 RAL_LOCK(sc); 1667 /* do it in a process context */ 1668 sc->sc_scan_action = URAL_SCAN_END; 1669 ural_queue_command(sc, ural_scantask, 1670 &sc->sc_scantask[0].hdr, &sc->sc_scantask[1].hdr); 1671 RAL_UNLOCK(sc); 1672 1673} 1674 1675static void 1676ural_set_channel(struct ieee80211com *ic) 1677{ 1678 struct ural_softc *sc = ic->ic_ifp->if_softc; 1679 1680 RAL_LOCK(sc); 1681 /* do it in a process context */ 1682 sc->sc_scan_action = URAL_SET_CHANNEL; 1683 ural_queue_command(sc, ural_scantask, 1684 &sc->sc_scantask[0].hdr, &sc->sc_scantask[1].hdr); 1685 1686 sc->sc_rates = ieee80211_get_ratetable(ic->ic_curchan); 1687 RAL_UNLOCK(sc); 1688} 1689 1690static void 1691ural_set_chan(struct ural_softc *sc, struct ieee80211_channel *c) 1692{ 1693 struct ifnet *ifp = sc->sc_ifp; 1694 struct ieee80211com *ic = ifp->if_l2com; 1695 uint8_t power, tmp; 1696 u_int i, chan; 1697 1698 chan = ieee80211_chan2ieee(ic, c); 1699 if (chan == 0 || chan == IEEE80211_CHAN_ANY) 1700 return; 1701 1702 if (IEEE80211_IS_CHAN_2GHZ(c)) 1703 power = min(sc->txpow[chan - 1], 31); 1704 else 1705 power = 31; 1706 1707 /* adjust txpower using ifconfig settings */ 1708 power -= (100 - ic->ic_txpowlimit) / 8; 1709 1710 DPRINTFN(2, "setting channel to %u, txpower to %u\n", chan, power); 1711 1712 switch (sc->rf_rev) { 1713 case RAL_RF_2522: 1714 ural_rf_write(sc, RAL_RF1, 0x00814); 1715 ural_rf_write(sc, RAL_RF2, ural_rf2522_r2[chan - 1]); 1716 ural_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 1717 break; 1718 1719 case RAL_RF_2523: 1720 ural_rf_write(sc, RAL_RF1, 0x08804); 1721 ural_rf_write(sc, RAL_RF2, ural_rf2523_r2[chan - 1]); 1722 ural_rf_write(sc, RAL_RF3, power << 7 | 0x38044); 1723 ural_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 1724 break; 1725 1726 case RAL_RF_2524: 1727 ural_rf_write(sc, RAL_RF1, 0x0c808); 1728 ural_rf_write(sc, RAL_RF2, ural_rf2524_r2[chan - 1]); 1729 ural_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 1730 ural_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 1731 break; 1732 1733 case RAL_RF_2525: 1734 ural_rf_write(sc, RAL_RF1, 0x08808); 1735 ural_rf_write(sc, RAL_RF2, ural_rf2525_hi_r2[chan - 1]); 1736 ural_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 1737 ural_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 1738 1739 ural_rf_write(sc, RAL_RF1, 0x08808); 1740 ural_rf_write(sc, RAL_RF2, ural_rf2525_r2[chan - 1]); 1741 ural_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 1742 ural_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00280 : 0x00286); 1743 break; 1744 1745 case RAL_RF_2525E: 1746 ural_rf_write(sc, RAL_RF1, 0x08808); 1747 ural_rf_write(sc, RAL_RF2, ural_rf2525e_r2[chan - 1]); 1748 ural_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 1749 ural_rf_write(sc, RAL_RF4, (chan == 14) ? 0x00286 : 0x00282); 1750 break; 1751 1752 case RAL_RF_2526: 1753 ural_rf_write(sc, RAL_RF2, ural_rf2526_hi_r2[chan - 1]); 1754 ural_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381); 1755 ural_rf_write(sc, RAL_RF1, 0x08804); 1756 1757 ural_rf_write(sc, RAL_RF2, ural_rf2526_r2[chan - 1]); 1758 ural_rf_write(sc, RAL_RF3, power << 7 | 0x18044); 1759 ural_rf_write(sc, RAL_RF4, (chan & 1) ? 0x00386 : 0x00381); 1760 break; 1761 1762 /* dual-band RF */ 1763 case RAL_RF_5222: 1764 for (i = 0; ural_rf5222[i].chan != chan; i++); 1765 1766 ural_rf_write(sc, RAL_RF1, ural_rf5222[i].r1); 1767 ural_rf_write(sc, RAL_RF2, ural_rf5222[i].r2); 1768 ural_rf_write(sc, RAL_RF3, power << 7 | 0x00040); 1769 ural_rf_write(sc, RAL_RF4, ural_rf5222[i].r4); 1770 break; 1771 } 1772 1773 if (ic->ic_opmode != IEEE80211_M_MONITOR && 1774 (ic->ic_flags & IEEE80211_F_SCAN) == 0) { 1775 /* set Japan filter bit for channel 14 */ 1776 tmp = ural_bbp_read(sc, 70); 1777 1778 tmp &= ~RAL_JAPAN_FILTER; 1779 if (chan == 14) 1780 tmp |= RAL_JAPAN_FILTER; 1781 1782 ural_bbp_write(sc, 70, tmp); 1783 1784 /* clear CRC errors */ 1785 ural_read(sc, RAL_STA_CSR0); 1786 1787 DELAY(10000); 1788 ural_disable_rf_tune(sc); 1789 } 1790 1791 /* XXX doesn't belong here */ 1792 /* update basic rate set */ 1793 ural_set_basicrates(sc, c); 1794} 1795 1796/* 1797 * Disable RF auto-tuning. 1798 */ 1799static void 1800ural_disable_rf_tune(struct ural_softc *sc) 1801{ 1802 uint32_t tmp; 1803 1804 if (sc->rf_rev != RAL_RF_2523) { 1805 tmp = sc->rf_regs[RAL_RF1] & ~RAL_RF1_AUTOTUNE; 1806 ural_rf_write(sc, RAL_RF1, tmp); 1807 } 1808 1809 tmp = sc->rf_regs[RAL_RF3] & ~RAL_RF3_AUTOTUNE; 1810 ural_rf_write(sc, RAL_RF3, tmp); 1811 1812 DPRINTFN(2, "disabling RF autotune\n"); 1813} 1814 1815/* 1816 * Refer to IEEE Std 802.11-1999 pp. 123 for more information on TSF 1817 * synchronization. 1818 */ 1819static void 1820ural_enable_tsf_sync(struct ural_softc *sc) 1821{ 1822 struct ifnet *ifp = sc->sc_ifp; 1823 struct ieee80211com *ic = ifp->if_l2com; 1824 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 1825 uint16_t logcwmin, preload, tmp; 1826 1827 /* first, disable TSF synchronization */ 1828 ural_write(sc, RAL_TXRX_CSR19, 0); 1829 1830 tmp = (16 * vap->iv_bss->ni_intval) << 4; 1831 ural_write(sc, RAL_TXRX_CSR18, tmp); 1832 1833 logcwmin = (ic->ic_opmode == IEEE80211_M_IBSS) ? 2 : 0; 1834 preload = (ic->ic_opmode == IEEE80211_M_IBSS) ? 320 : 6; 1835 tmp = logcwmin << 12 | preload; 1836 ural_write(sc, RAL_TXRX_CSR20, tmp); 1837 1838 /* finally, enable TSF synchronization */ 1839 tmp = RAL_ENABLE_TSF | RAL_ENABLE_TBCN; 1840 if (ic->ic_opmode == IEEE80211_M_STA) 1841 tmp |= RAL_ENABLE_TSF_SYNC(1); 1842 else 1843 tmp |= RAL_ENABLE_TSF_SYNC(2) | RAL_ENABLE_BEACON_GENERATOR; 1844 ural_write(sc, RAL_TXRX_CSR19, tmp); 1845 1846 DPRINTF("enabling TSF synchronization\n"); 1847} 1848 1849#define RAL_RXTX_TURNAROUND 5 /* us */ 1850static void 1851ural_update_slot(struct ifnet *ifp) 1852{ 1853 struct ural_softc *sc = ifp->if_softc; 1854 struct ieee80211com *ic = ifp->if_l2com; 1855 uint16_t slottime, sifs, eifs; 1856 1857 slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; 1858 1859 /* 1860 * These settings may sound a bit inconsistent but this is what the 1861 * reference driver does. 1862 */ 1863 if (ic->ic_curmode == IEEE80211_MODE_11B) { 1864 sifs = 16 - RAL_RXTX_TURNAROUND; 1865 eifs = 364; 1866 } else { 1867 sifs = 10 - RAL_RXTX_TURNAROUND; 1868 eifs = 64; 1869 } 1870 1871 ural_write(sc, RAL_MAC_CSR10, slottime); 1872 ural_write(sc, RAL_MAC_CSR11, sifs); 1873 ural_write(sc, RAL_MAC_CSR12, eifs); 1874} 1875 1876static void 1877ural_set_txpreamble(struct ural_softc *sc) 1878{ 1879 struct ifnet *ifp = sc->sc_ifp; 1880 struct ieee80211com *ic = ifp->if_l2com; 1881 uint16_t tmp; 1882 1883 tmp = ural_read(sc, RAL_TXRX_CSR10); 1884 1885 tmp &= ~RAL_SHORT_PREAMBLE; 1886 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 1887 tmp |= RAL_SHORT_PREAMBLE; 1888 1889 ural_write(sc, RAL_TXRX_CSR10, tmp); 1890} 1891 1892static void 1893ural_set_basicrates(struct ural_softc *sc, const struct ieee80211_channel *c) 1894{ 1895 /* XXX wrong, take from rate set */ 1896 /* update basic rate set */ 1897 if (IEEE80211_IS_CHAN_5GHZ(c)) { 1898 /* 11a basic rates: 6, 12, 24Mbps */ 1899 ural_write(sc, RAL_TXRX_CSR11, 0x150); 1900 } else if (IEEE80211_IS_CHAN_ANYG(c)) { 1901 /* 11g basic rates: 1, 2, 5.5, 11, 6, 12, 24Mbps */ 1902 ural_write(sc, RAL_TXRX_CSR11, 0x15f); 1903 } else { 1904 /* 11b basic rates: 1, 2Mbps */ 1905 ural_write(sc, RAL_TXRX_CSR11, 0x3); 1906 } 1907} 1908 1909static void 1910ural_set_bssid(struct ural_softc *sc, const uint8_t *bssid) 1911{ 1912 uint16_t tmp; 1913 1914 tmp = bssid[0] | bssid[1] << 8; 1915 ural_write(sc, RAL_MAC_CSR5, tmp); 1916 1917 tmp = bssid[2] | bssid[3] << 8; 1918 ural_write(sc, RAL_MAC_CSR6, tmp); 1919 1920 tmp = bssid[4] | bssid[5] << 8; 1921 ural_write(sc, RAL_MAC_CSR7, tmp); 1922 1923 DPRINTF("setting BSSID to %6D\n", bssid, ":"); 1924} 1925 1926static void 1927ural_set_macaddr(struct ural_softc *sc, uint8_t *addr) 1928{ 1929 uint16_t tmp; 1930 1931 tmp = addr[0] | addr[1] << 8; 1932 ural_write(sc, RAL_MAC_CSR2, tmp); 1933 1934 tmp = addr[2] | addr[3] << 8; 1935 ural_write(sc, RAL_MAC_CSR3, tmp); 1936 1937 tmp = addr[4] | addr[5] << 8; 1938 ural_write(sc, RAL_MAC_CSR4, tmp); 1939 1940 DPRINTF("setting MAC address to %6D\n", addr, ":"); 1941} 1942 1943static void 1944ural_promisctask(struct usb2_proc_msg *pm) 1945{ 1946 struct ural_task *task = (struct ural_task *)pm; 1947 struct ural_softc *sc = task->sc; 1948 struct ifnet *ifp = sc->sc_ifp; 1949 uint32_t tmp; 1950 1951 tmp = ural_read(sc, RAL_TXRX_CSR2); 1952 1953 tmp &= ~RAL_DROP_NOT_TO_ME; 1954 if (!(ifp->if_flags & IFF_PROMISC)) 1955 tmp |= RAL_DROP_NOT_TO_ME; 1956 1957 ural_write(sc, RAL_TXRX_CSR2, tmp); 1958 1959 DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ? 1960 "entering" : "leaving"); 1961} 1962 1963static const char * 1964ural_get_rf(int rev) 1965{ 1966 switch (rev) { 1967 case RAL_RF_2522: return "RT2522"; 1968 case RAL_RF_2523: return "RT2523"; 1969 case RAL_RF_2524: return "RT2524"; 1970 case RAL_RF_2525: return "RT2525"; 1971 case RAL_RF_2525E: return "RT2525e"; 1972 case RAL_RF_2526: return "RT2526"; 1973 case RAL_RF_5222: return "RT5222"; 1974 default: return "unknown"; 1975 } 1976} 1977 1978static void 1979ural_read_eeprom(struct ural_softc *sc) 1980{ 1981 uint16_t val; 1982 1983 ural_eeprom_read(sc, RAL_EEPROM_CONFIG0, &val, 2); 1984 val = le16toh(val); 1985 sc->rf_rev = (val >> 11) & 0x7; 1986 sc->hw_radio = (val >> 10) & 0x1; 1987 sc->led_mode = (val >> 6) & 0x7; 1988 sc->rx_ant = (val >> 4) & 0x3; 1989 sc->tx_ant = (val >> 2) & 0x3; 1990 sc->nb_ant = val & 0x3; 1991 1992 /* read MAC address */ 1993 ural_eeprom_read(sc, RAL_EEPROM_ADDRESS, sc->sc_bssid, 6); 1994 1995 /* read default values for BBP registers */ 1996 ural_eeprom_read(sc, RAL_EEPROM_BBP_BASE, sc->bbp_prom, 2 * 16); 1997 1998 /* read Tx power for all b/g channels */ 1999 ural_eeprom_read(sc, RAL_EEPROM_TXPOWER, sc->txpow, 14); 2000} 2001 2002static int 2003ural_bbp_init(struct ural_softc *sc) 2004{ 2005#define N(a) (sizeof (a) / sizeof ((a)[0])) 2006 int i, ntries; 2007 2008 /* wait for BBP to be ready */ 2009 for (ntries = 0; ntries < 100; ntries++) { 2010 if (ural_bbp_read(sc, RAL_BBP_VERSION) != 0) 2011 break; 2012 DELAY(1000); 2013 } 2014 if (ntries == 100) { 2015 device_printf(sc->sc_dev, "timeout waiting for BBP\n"); 2016 return EIO; 2017 } 2018 2019 /* initialize BBP registers to default values */ 2020 for (i = 0; i < N(ural_def_bbp); i++) 2021 ural_bbp_write(sc, ural_def_bbp[i].reg, ural_def_bbp[i].val); 2022 2023#if 0 2024 /* initialize BBP registers to values stored in EEPROM */ 2025 for (i = 0; i < 16; i++) { 2026 if (sc->bbp_prom[i].reg == 0xff) 2027 continue; 2028 ural_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); 2029 } 2030#endif 2031 2032 return 0; 2033#undef N 2034} 2035 2036static void 2037ural_set_txantenna(struct ural_softc *sc, int antenna) 2038{ 2039 uint16_t tmp; 2040 uint8_t tx; 2041 2042 tx = ural_bbp_read(sc, RAL_BBP_TX) & ~RAL_BBP_ANTMASK; 2043 if (antenna == 1) 2044 tx |= RAL_BBP_ANTA; 2045 else if (antenna == 2) 2046 tx |= RAL_BBP_ANTB; 2047 else 2048 tx |= RAL_BBP_DIVERSITY; 2049 2050 /* need to force I/Q flip for RF 2525e, 2526 and 5222 */ 2051 if (sc->rf_rev == RAL_RF_2525E || sc->rf_rev == RAL_RF_2526 || 2052 sc->rf_rev == RAL_RF_5222) 2053 tx |= RAL_BBP_FLIPIQ; 2054 2055 ural_bbp_write(sc, RAL_BBP_TX, tx); 2056 2057 /* update values in PHY_CSR5 and PHY_CSR6 */ 2058 tmp = ural_read(sc, RAL_PHY_CSR5) & ~0x7; 2059 ural_write(sc, RAL_PHY_CSR5, tmp | (tx & 0x7)); 2060 2061 tmp = ural_read(sc, RAL_PHY_CSR6) & ~0x7; 2062 ural_write(sc, RAL_PHY_CSR6, tmp | (tx & 0x7)); 2063} 2064 2065static void 2066ural_set_rxantenna(struct ural_softc *sc, int antenna) 2067{ 2068 uint8_t rx; 2069 2070 rx = ural_bbp_read(sc, RAL_BBP_RX) & ~RAL_BBP_ANTMASK; 2071 if (antenna == 1) 2072 rx |= RAL_BBP_ANTA; 2073 else if (antenna == 2) 2074 rx |= RAL_BBP_ANTB; 2075 else 2076 rx |= RAL_BBP_DIVERSITY; 2077 2078 /* need to force no I/Q flip for RF 2525e and 2526 */ 2079 if (sc->rf_rev == RAL_RF_2525E || sc->rf_rev == RAL_RF_2526) 2080 rx &= ~RAL_BBP_FLIPIQ; 2081 2082 ural_bbp_write(sc, RAL_BBP_RX, rx); 2083} 2084 2085static void 2086ural_init_task(struct usb2_proc_msg *pm) 2087{ 2088#define N(a) (sizeof (a) / sizeof ((a)[0])) 2089 struct ural_task *task = (struct ural_task *)pm; 2090 struct ural_softc *sc = task->sc; 2091 struct ifnet *ifp = sc->sc_ifp; 2092 struct ieee80211com *ic = ifp->if_l2com; 2093 uint16_t tmp; 2094 int i, ntries; 2095 2096 RAL_LOCK_ASSERT(sc, MA_OWNED); 2097 2098 ural_set_testmode(sc); 2099 ural_write(sc, 0x308, 0x00f0); /* XXX magic */ 2100 2101 ural_stop_task(pm); 2102 2103 /* initialize MAC registers to default values */ 2104 for (i = 0; i < N(ural_def_mac); i++) 2105 ural_write(sc, ural_def_mac[i].reg, ural_def_mac[i].val); 2106 2107 /* wait for BBP and RF to wake up (this can take a long time!) */ 2108 for (ntries = 0; ntries < 100; ntries++) { 2109 tmp = ural_read(sc, RAL_MAC_CSR17); 2110 if ((tmp & (RAL_BBP_AWAKE | RAL_RF_AWAKE)) == 2111 (RAL_BBP_AWAKE | RAL_RF_AWAKE)) 2112 break; 2113 DELAY(1000); 2114 } 2115 if (ntries == 100) { 2116 device_printf(sc->sc_dev, 2117 "timeout waiting for BBP/RF to wakeup\n"); 2118 goto fail; 2119 } 2120 2121 /* we're ready! */ 2122 ural_write(sc, RAL_MAC_CSR1, RAL_HOST_READY); 2123 2124 /* set basic rate set (will be updated later) */ 2125 ural_write(sc, RAL_TXRX_CSR11, 0x15f); 2126 2127 if (ural_bbp_init(sc) != 0) 2128 goto fail; 2129 2130 ural_set_chan(sc, ic->ic_curchan); 2131 2132 /* clear statistic registers (STA_CSR0 to STA_CSR10) */ 2133 ural_read_multi(sc, RAL_STA_CSR0, sc->sta, sizeof sc->sta); 2134 2135 ural_set_txantenna(sc, sc->tx_ant); 2136 ural_set_rxantenna(sc, sc->rx_ant); 2137 2138 IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp)); 2139 ural_set_macaddr(sc, ic->ic_myaddr); 2140 2141 /* 2142 * Allocate Tx and Rx xfer queues. 2143 */ 2144 ural_setup_tx_list(sc); 2145 2146 /* kick Rx */ 2147 tmp = RAL_DROP_PHY | RAL_DROP_CRC; 2148 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 2149 tmp |= RAL_DROP_CTL | RAL_DROP_BAD_VERSION; 2150 if (ic->ic_opmode != IEEE80211_M_HOSTAP) 2151 tmp |= RAL_DROP_TODS; 2152 if (!(ifp->if_flags & IFF_PROMISC)) 2153 tmp |= RAL_DROP_NOT_TO_ME; 2154 } 2155 ural_write(sc, RAL_TXRX_CSR2, tmp); 2156 2157 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2158 ifp->if_drv_flags |= IFF_DRV_RUNNING; 2159 usb2_transfer_start(sc->sc_xfer[URAL_BULK_RD]); 2160 return; 2161 2162fail: ural_stop_task(pm); 2163#undef N 2164} 2165 2166static void 2167ural_init(void *priv) 2168{ 2169 struct ural_softc *sc = priv; 2170 struct ifnet *ifp = sc->sc_ifp; 2171 struct ieee80211com *ic = ifp->if_l2com; 2172 2173 RAL_LOCK(sc); 2174 ural_queue_command(sc, ural_init_task, 2175 &sc->sc_synctask[0].hdr, 2176 &sc->sc_synctask[1].hdr); 2177 RAL_UNLOCK(sc); 2178 2179 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 2180 ieee80211_start_all(ic); /* start all vap's */ 2181} 2182 2183static void 2184ural_stop_task(struct usb2_proc_msg *pm) 2185{ 2186 struct ural_task *task = (struct ural_task *)pm; 2187 struct ural_softc *sc = task->sc; 2188 struct ifnet *ifp = sc->sc_ifp; 2189 2190 RAL_LOCK_ASSERT(sc, MA_OWNED); 2191 2192 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 2193 2194 /* 2195 * Drain all the transfers, if not already drained: 2196 */ 2197 RAL_UNLOCK(sc); 2198 usb2_transfer_drain(sc->sc_xfer[URAL_BULK_WR]); 2199 usb2_transfer_drain(sc->sc_xfer[URAL_BULK_RD]); 2200 RAL_LOCK(sc); 2201 2202 ural_unsetup_tx_list(sc); 2203 2204 /* disable Rx */ 2205 ural_write(sc, RAL_TXRX_CSR2, RAL_DISABLE_RX); 2206 /* reset ASIC and BBP (but won't reset MAC registers!) */ 2207 ural_write(sc, RAL_MAC_CSR1, RAL_RESET_ASIC | RAL_RESET_BBP); 2208 ural_write(sc, RAL_MAC_CSR1, 0); 2209} 2210 2211static int 2212ural_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 2213 const struct ieee80211_bpf_params *params) 2214{ 2215 struct ieee80211com *ic = ni->ni_ic; 2216 struct ifnet *ifp = ic->ic_ifp; 2217 struct ural_softc *sc = ifp->if_softc; 2218 2219 RAL_LOCK(sc); 2220 /* prevent management frames from being sent if we're not ready */ 2221 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { 2222 RAL_UNLOCK(sc); 2223 m_freem(m); 2224 ieee80211_free_node(ni); 2225 return ENETDOWN; 2226 } 2227 if (sc->tx_nfree == 0) { 2228 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2229 RAL_UNLOCK(sc); 2230 m_freem(m); 2231 ieee80211_free_node(ni); 2232 return EIO; 2233 } 2234 2235 ifp->if_opackets++; 2236 2237 if (params == NULL) { 2238 /* 2239 * Legacy path; interpret frame contents to decide 2240 * precisely how to send the frame. 2241 */ 2242 if (ural_tx_mgt(sc, m, ni) != 0) 2243 goto bad; 2244 } else { 2245 /* 2246 * Caller supplied explicit parameters to use in 2247 * sending the frame. 2248 */ 2249 if (ural_tx_raw(sc, m, ni, params) != 0) 2250 goto bad; 2251 } 2252 RAL_UNLOCK(sc); 2253 return 0; 2254bad: 2255 ifp->if_oerrors++; 2256 RAL_UNLOCK(sc); 2257 ieee80211_free_node(ni); 2258 return EIO; /* XXX */ 2259} 2260 2261static void 2262ural_amrr_start(struct ural_softc *sc, struct ieee80211_node *ni) 2263{ 2264 struct ieee80211vap *vap = ni->ni_vap; 2265 struct ural_vap *uvp = URAL_VAP(vap); 2266 2267 /* clear statistic registers (STA_CSR0 to STA_CSR10) */ 2268 ural_read_multi(sc, RAL_STA_CSR0, sc->sta, sizeof sc->sta); 2269 2270 ieee80211_amrr_node_init(&uvp->amrr, &URAL_NODE(ni)->amn, ni); 2271 2272 usb2_callout_reset(&uvp->amrr_ch, hz, ural_amrr_timeout, uvp); 2273} 2274 2275static void 2276ural_amrr_timeout(void *arg) 2277{ 2278 struct ural_vap *uvp = arg; 2279 struct ural_softc *sc = uvp->sc; 2280 2281 ural_queue_command(sc, ural_amrr_task, 2282 &uvp->amrr_task[0].hdr, &uvp->amrr_task[1].hdr); 2283} 2284 2285static void 2286ural_amrr_task(struct usb2_proc_msg *pm) 2287{ 2288 struct ural_task *task = (struct ural_task *)pm; 2289 struct ural_softc *sc = task->sc; 2290 struct ifnet *ifp = sc->sc_ifp; 2291 struct ieee80211com *ic = ifp->if_l2com; 2292 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2293 struct ural_vap *uvp = URAL_VAP(vap); 2294 struct ieee80211_node *ni = vap->iv_bss; 2295 int ok, fail; 2296 2297 /* read and clear statistic registers (STA_CSR0 to STA_CSR10) */ 2298 ural_read_multi(sc, RAL_STA_CSR0, sc->sta, sizeof(sc->sta)); 2299 2300 ok = sc->sta[7] + /* TX ok w/o retry */ 2301 sc->sta[8]; /* TX ok w/ retry */ 2302 fail = sc->sta[9]; /* TX retry-fail count */ 2303 2304 ieee80211_amrr_tx_update(&URAL_NODE(ni)->amn, 2305 ok+fail, ok, sc->sta[8] + fail); 2306 (void) ieee80211_amrr_choose(ni, &URAL_NODE(ni)->amn); 2307 2308 ifp->if_oerrors += fail; /* count TX retry-fail as Tx errors */ 2309 2310 usb2_callout_reset(&uvp->amrr_ch, hz, ural_amrr_timeout, uvp); 2311} 2312 2313static void 2314ural_queue_command(struct ural_softc *sc, usb2_proc_callback_t *fn, 2315 struct usb2_proc_msg *t0, struct usb2_proc_msg *t1) 2316{ 2317 struct ural_task *task; 2318 2319 RAL_LOCK_ASSERT(sc, MA_OWNED); 2320 2321 if (usb2_proc_is_gone(&sc->sc_tq)) { 2322 DPRINTF("proc is gone\n"); 2323 return; /* nothing to do */ 2324 } 2325 /* 2326 * NOTE: The task cannot get executed before we drop the 2327 * "sc_mtx" mutex. It is safe to update fields in the message 2328 * structure after that the message got queued. 2329 */ 2330 task = (struct ural_task *) 2331 usb2_proc_msignal(&sc->sc_tq, t0, t1); 2332 2333 /* Setup callback and softc pointers */ 2334 task->hdr.pm_callback = fn; 2335 task->sc = sc; 2336 2337 /* 2338 * Init and stop must be synchronous! 2339 */ 2340 if ((fn == ural_init_task) || (fn == ural_stop_task)) 2341 usb2_proc_mwait(&sc->sc_tq, t0, t1); 2342} 2343 2344