if_tireg.h revision 199559
1/*- 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: head/sys/dev/ti/if_tireg.h 199559 2009-11-19 22:06:40Z jhb $ 33 */ 34 35/* 36 * Tigon register offsets. These are memory mapped registers 37 * which can be accessed with the CSR_READ_4()/CSR_WRITE_4() macros. 38 * Each register must be accessed using 32 bit operations. 39 * 40 * All reegisters are accessed through a 16K shared memory block. 41 * The first group of registers are actually copies of the PCI 42 * configuration space registers. 43 */ 44 45#define TI_PCI_ID 0x000 /* PCI device/vendor ID */ 46#define TI_PCI_CMDSTAT 0x004 47#define TI_PCI_CLASSCODE 0x008 48#define TI_PCI_BIST 0x00C 49#define TI_PCI_LOMEM 0x010 /* Shared memory base address */ 50#define TI_PCI_SUBSYS 0x02C 51#define TI_PCI_ROMBASE 0x030 52#define TI_PCI_INT 0x03C 53 54#ifndef PCIM_CMD_MWIEN 55#define PCIM_CMD_MWIEN 0x0010 56#endif 57 58/* 59 * Alteon AceNIC PCI vendor/device ID. 60 */ 61#define ALT_VENDORID 0x12AE 62#define ALT_DEVICEID_ACENIC 0x0001 63#define ALT_DEVICEID_ACENIC_COPPER 0x0002 64 65/* 66 * 3Com 3c985 PCI vendor/device ID. 67 */ 68#define TC_VENDORID 0x10B7 69#define TC_DEVICEID_3C985 0x0001 70 71/* 72 * Netgear GA620 PCI vendor/device ID. 73 */ 74#define NG_VENDORID 0x1385 75#define NG_DEVICEID_GA620 0x620A 76#define NG_DEVICEID_GA620T 0x630A 77 78/* 79 * SGI device/vendor ID. 80 */ 81#define SGI_VENDORID 0x10A9 82#define SGI_DEVICEID_TIGON 0x0009 83 84/* 85 * DEC vendor ID, Farallon device ID. Apparently, Farallon used 86 * the DEC vendor ID in their cards by mistake. 87 */ 88#define DEC_VENDORID 0x1011 89#define DEC_DEVICEID_FARALLON_PN9000SX 0x001a 90 91/* 92 * Tigon configuration and control registers. 93 */ 94#define TI_MISC_HOST_CTL 0x040 95#define TI_MISC_LOCAL_CTL 0x044 96#define TI_SEM_AB 0x048 /* Tigon 2 only */ 97#define TI_MISC_CONF 0x050 /* Tigon 2 only */ 98#define TI_TIMER_BITS 0x054 99#define TI_TIMERREF 0x058 100#define TI_PCI_STATE 0x05C 101#define TI_MAIN_EVENT_A 0x060 102#define TI_MAILBOX_EVENT_A 0x064 103#define TI_WINBASE 0x068 104#define TI_WINDATA 0x06C 105#define TI_MAIN_EVENT_B 0x070 /* Tigon 2 only */ 106#define TI_MAILBOX_EVENT_B 0x074 /* Tigon 2 only */ 107#define TI_TIMERREF_B 0x078 /* Tigon 2 only */ 108#define TI_SERIAL 0x07C 109 110/* 111 * Misc host control bits. 112 */ 113#define TI_MHC_INTSTATE 0x00000001 114#define TI_MHC_CLEARINT 0x00000002 115#define TI_MHC_RESET 0x00000008 116#define TI_MHC_BYTE_SWAP_ENB 0x00000010 117#define TI_MHC_WORD_SWAP_ENB 0x00000020 118#define TI_MHC_MASK_INTS 0x00000040 119#define TI_MHC_CHIP_REV_MASK 0xF0000000 120 121#define TI_MHC_BIGENDIAN_INIT \ 122 (TI_MHC_BYTE_SWAP_ENB|TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT) 123 124#define TI_MHC_LITTLEENDIAN_INIT \ 125 (TI_MHC_WORD_SWAP_ENB|TI_MHC_CLEARINT) 126 127/* 128 * Tigon chip rev values. Rev 4 is the Tigon 1. Rev 6 is the Tigon 2. 129 * Rev 5 is also the Tigon 2, but is a broken version which was never 130 * used in any actual hardware, so we ignore it. 131 */ 132#define TI_REV_TIGON_I 0x40000000 133#define TI_REV_TIGON_II 0x60000000 134 135/* 136 * Firmware revision that we want. 137 */ 138#define TI_FIRMWARE_MAJOR 0xc 139#define TI_FIRMWARE_MINOR 0x4 140#define TI_FIRMWARE_FIX 0xb 141 142/* 143 * Miscelaneous Local Control register. 144 */ 145#define TI_MLC_EE_WRITE_ENB 0x00000010 146#define TI_MLC_SRAM_BANK_SIZE 0x00000300 /* Tigon 2 only */ 147#define TI_MLC_LOCALADDR_21 0x00004000 148#define TI_MLC_LOCALADDR_22 0x00008000 149#define TI_MLC_SBUS_WRITEERR 0x00080000 150#define TI_MLC_EE_CLK 0x00100000 151#define TI_MLC_EE_TXEN 0x00200000 152#define TI_MLC_EE_DOUT 0x00400000 153#define TI_MLC_EE_DIN 0x00800000 154 155/* Possible memory sizes. */ 156#define TI_MLC_SRAM_BANK_DISA 0x00000000 157#define TI_MLC_SRAM_BANK_1024K 0x00000100 158#define TI_MLC_SRAM_BANK_512K 0x00000200 159#define TI_MLC_SRAM_BANK_256K 0x00000300 160 161/* 162 * Offset of MAC address inside EEPROM. 163 */ 164#define TI_EE_MAC_OFFSET 0x8c 165 166#define TI_DMA_ASSIST 0x11C 167#define TI_CPU_STATE 0x140 168#define TI_CPU_PROGRAM_COUNTER 0x144 169#define TI_SRAM_ADDR 0x154 170#define TI_SRAM_DATA 0x158 171#define TI_GEN_0 0x180 172#define TI_GEN_X 0x1FC 173#define TI_MAC_TX_STATE 0x200 174#define TI_MAC_RX_STATE 0x220 175#define TI_CPU_CTL_B 0x240 /* Tigon 2 only */ 176#define TI_CPU_PROGRAM_COUNTER_B 0x244 /* Tigon 2 only */ 177#define TI_SRAM_ADDR_B 0x254 /* Tigon 2 only */ 178#define TI_SRAM_DATA_B 0x258 /* Tigon 2 only */ 179#define TI_GEN_B_0 0x280 /* Tigon 2 only */ 180#define TI_GEN_B_X 0x2FC /* Tigon 2 only */ 181 182/* 183 * Misc config register. 184 */ 185#define TI_MCR_SRAM_SYNCHRONOUS 0x00100000 /* Tigon 2 only */ 186 187/* 188 * PCI state register. 189 */ 190#define TI_PCISTATE_FORCE_RESET 0x00000001 191#define TI_PCISTATE_PROVIDE_LEN 0x00000002 192#define TI_PCISTATE_READ_MAXDMA 0x0000001C 193#define TI_PCISTATE_WRITE_MAXDMA 0x000000E0 194#define TI_PCISTATE_MINDMA 0x0000FF00 195#define TI_PCISTATE_FIFO_RETRY_ENB 0x00010000 196#define TI_PCISTATE_USE_MEM_RD_MULT 0x00020000 197#define TI_PCISTATE_NO_SWAP_READ_DMA 0x00040000 198#define TI_PCISTATE_NO_SWAP_WRITE_DMA 0x00080000 199#define TI_PCISTATE_66MHZ_BUS 0x00080000 /* Tigon 2 only */ 200#define TI_PCISTATE_32BIT_BUS 0x00100000 /* Tigon 2 only */ 201#define TI_PCISTATE_ENB_BYTE_ENABLES 0x00800000 /* Tigon 2 only */ 202#define TI_PCISTATE_READ_CMD 0x0F000000 203#define TI_PCISTATE_WRITE_CMD 0xF0000000 204 205#define TI_PCI_READMAX_4 0x04 206#define TI_PCI_READMAX_16 0x08 207#define TI_PCI_READMAX_32 0x0C 208#define TI_PCI_READMAX_64 0x10 209#define TI_PCI_READMAX_128 0x14 210#define TI_PCI_READMAX_256 0x18 211#define TI_PCI_READMAX_1024 0x1C 212 213#define TI_PCI_WRITEMAX_4 0x20 214#define TI_PCI_WRITEMAX_16 0x40 215#define TI_PCI_WRITEMAX_32 0x60 216#define TI_PCI_WRITEMAX_64 0x80 217#define TI_PCI_WRITEMAX_128 0xA0 218#define TI_PCI_WRITEMAX_256 0xC0 219#define TI_PCI_WRITEMAX_1024 0xE0 220 221#define TI_PCI_READ_CMD 0x06000000 222#define TI_PCI_WRITE_CMD 0x70000000 223 224/* 225 * DMA state register. 226 */ 227#define TI_DMASTATE_ENABLE 0x00000001 228#define TI_DMASTATE_PAUSE 0x00000002 229 230/* 231 * CPU state register. 232 */ 233#define TI_CPUSTATE_RESET 0x00000001 234#define TI_CPUSTATE_STEP 0x00000002 235#define TI_CPUSTATE_ROMFAIL 0x00000010 236#define TI_CPUSTATE_HALT 0x00010000 237/* 238 * MAC TX state register 239 */ 240#define TI_TXSTATE_RESET 0x00000001 241#define TI_TXSTATE_ENB 0x00000002 242#define TI_TXSTATE_STOP 0x00000004 243 244/* 245 * MAC RX state register 246 */ 247#define TI_RXSTATE_RESET 0x00000001 248#define TI_RXSTATE_ENB 0x00000002 249#define TI_RXSTATE_STOP 0x00000004 250 251/* 252 * Tigon 2 mailbox registers. The mailbox area consists of 256 bytes 253 * split into 64 bit registers. Only the lower 32 bits of each mailbox 254 * are used. 255 */ 256#define TI_MB_HOSTINTR_HI 0x500 257#define TI_MB_HOSTINTR_LO 0x504 258#define TI_MB_HOSTINTR TI_MB_HOSTINTR_LO 259#define TI_MB_CMDPROD_IDX_HI 0x508 260#define TI_MB_CMDPROD_IDX_LO 0x50C 261#define TI_MB_CMDPROD_IDX TI_MB_CMDPROD_IDX_LO 262#define TI_MB_SENDPROD_IDX_HI 0x510 263#define TI_MB_SENDPROD_IDX_LO 0x514 264#define TI_MB_SENDPROD_IDX TI_MB_SENDPROD_IDX_LO 265#define TI_MB_STDRXPROD_IDX_HI 0x518 /* Tigon 2 only */ 266#define TI_MB_STDRXPROD_IDX_LO 0x51C /* Tigon 2 only */ 267#define TI_MB_STDRXPROD_IDX TI_MB_STDRXPROD_IDX_LO 268#define TI_MB_JUMBORXPROD_IDX_HI 0x520 /* Tigon 2 only */ 269#define TI_MB_JUMBORXPROD_IDX_LO 0x524 /* Tigon 2 only */ 270#define TI_MB_JUMBORXPROD_IDX TI_MB_JUMBORXPROD_IDX_LO 271#define TI_MB_MINIRXPROD_IDX_HI 0x528 /* Tigon 2 only */ 272#define TI_MB_MINIRXPROD_IDX_LO 0x52C /* Tigon 2 only */ 273#define TI_MB_MINIRXPROD_IDX TI_MB_MINIRXPROD_IDX_LO 274#define TI_MB_RSVD 0x530 275 276/* 277 * Tigon 2 general communication registers. These are 64 and 32 bit 278 * registers which are only valid after the firmware has been 279 * loaded and started. They actually exist in NIC memory but are 280 * mapped into the host memory via the shared memory region. 281 * 282 * The NIC internally maps these registers starting at address 0, 283 * so to determine the NIC address of any of these registers, we 284 * subtract 0x600 (the address of the first register). 285 */ 286 287#define TI_GCR_BASE 0x600 288#define TI_GCR_MACADDR 0x600 289#define TI_GCR_PAR0 0x600 290#define TI_GCR_PAR1 0x604 291#define TI_GCR_GENINFO_HI 0x608 292#define TI_GCR_GENINFO_LO 0x60C 293#define TI_GCR_MCASTADDR 0x610 /* obsolete */ 294#define TI_GCR_MAR0 0x610 /* obsolete */ 295#define TI_GCR_MAR1 0x614 /* obsolete */ 296#define TI_GCR_OPMODE 0x618 297#define TI_GCR_DMA_READCFG 0x61C 298#define TI_GCR_DMA_WRITECFG 0x620 299#define TI_GCR_TX_BUFFER_RATIO 0x624 300#define TI_GCR_EVENTCONS_IDX 0x628 301#define TI_GCR_CMDCONS_IDX 0x62C 302#define TI_GCR_TUNEPARMS 0x630 303#define TI_GCR_RX_COAL_TICKS 0x630 304#define TI_GCR_TX_COAL_TICKS 0x634 305#define TI_GCR_STAT_TICKS 0x638 306#define TI_GCR_TX_MAX_COAL_BD 0x63C 307#define TI_GCR_RX_MAX_COAL_BD 0x640 308#define TI_GCR_NIC_TRACING 0x644 309#define TI_GCR_GLINK 0x648 310#define TI_GCR_LINK 0x64C 311#define TI_GCR_NICTRACE_PTR 0x650 312#define TI_GCR_NICTRACE_START 0x654 313#define TI_GCR_NICTRACE_LEN 0x658 314#define TI_GCR_IFINDEX 0x65C 315#define TI_GCR_IFMTU 0x660 316#define TI_GCR_MASK_INTRS 0x664 317#define TI_GCR_GLINK_STAT 0x668 318#define TI_GCR_LINK_STAT 0x66C 319#define TI_GCR_RXRETURNCONS_IDX 0x680 320#define TI_GCR_CMDRING 0x700 321 322#define TI_GCR_NIC_ADDR(x) (x - TI_GCR_BASE) 323 324/* 325 * Local memory window. The local memory window is a 2K shared 326 * memory region which can be used to access the NIC's internal 327 * SRAM. The window can be mapped to a given 2K region using 328 * the TI_WINDOW_BASE register. 329 */ 330#define TI_WINDOW 0x800 331#define TI_WINLEN 0x800 332 333#define TI_TICKS_PER_SEC 1000000 334 335/* 336 * Operation mode register. 337 */ 338#define TI_OPMODE_BYTESWAP_BD 0x00000002 339#define TI_OPMODE_WORDSWAP_BD 0x00000004 340#define TI_OPMODE_WARN_ENB 0x00000008 /* not yet implimented */ 341#define TI_OPMODE_BYTESWAP_DATA 0x00000010 342#define TI_OPMODE_1_DMA_ACTIVE 0x00000040 343#define TI_OPMODE_SBUS 0x00000100 344#define TI_OPMODE_DONT_FRAG_JUMBO 0x00000200 345#define TI_OPMODE_INCLUDE_CRC 0x00000400 346#define TI_OPMODE_RX_BADFRAMES 0x00000800 347#define TI_OPMODE_NO_EVENT_INTRS 0x00001000 348#define TI_OPMODE_NO_TX_INTRS 0x00002000 349#define TI_OPMODE_NO_RX_INTRS 0x00004000 350#define TI_OPMODE_FATAL_ENB 0x40000000 /* not yet implimented */ 351#define TI_OPMODE_JUMBO_HDRSPLIT 0x00008000 352 353/* 354 * DMA configuration thresholds. 355 */ 356#define TI_DMA_STATE_THRESH_16W 0x00000100 357#define TI_DMA_STATE_THRESH_8W 0x00000080 358#define TI_DMA_STATE_THRESH_4W 0x00000040 359#define TI_DMA_STATE_THRESH_2W 0x00000020 360#define TI_DMA_STATE_THRESH_1W 0x00000010 361 362#define TI_DMA_STATE_FORCE_32_BIT 0x00000008 363 364/* 365 * Gigabit link status bits. 366 */ 367#define TI_GLNK_SENSE_NO_BEG 0x00002000 368#define TI_GLNK_LOOPBACK 0x00004000 369#define TI_GLNK_PREF 0x00008000 370#define TI_GLNK_1000MB 0x00040000 371#define TI_GLNK_FULL_DUPLEX 0x00080000 372#define TI_GLNK_TX_FLOWCTL_Y 0x00200000 /* Tigon 2 only */ 373#define TI_GLNK_RX_FLOWCTL_Y 0x00800000 374#define TI_GLNK_AUTONEGENB 0x20000000 375#define TI_GLNK_ENB 0x40000000 376 377/* 378 * Link status bits. 379 */ 380#define TI_LNK_LOOPBACK 0x00004000 381#define TI_LNK_PREF 0x00008000 382#define TI_LNK_10MB 0x00010000 383#define TI_LNK_100MB 0x00020000 384#define TI_LNK_1000MB 0x00040000 385#define TI_LNK_FULL_DUPLEX 0x00080000 386#define TI_LNK_HALF_DUPLEX 0x00100000 387#define TI_LNK_TX_FLOWCTL_Y 0x00200000 /* Tigon 2 only */ 388#define TI_LNK_RX_FLOWCTL_Y 0x00800000 389#define TI_LNK_AUTONEGENB 0x20000000 390#define TI_LNK_ENB 0x40000000 391 392/* 393 * Ring size constants. 394 */ 395#define TI_EVENT_RING_CNT 256 396#define TI_CMD_RING_CNT 64 397#define TI_STD_RX_RING_CNT 512 398#define TI_JUMBO_RX_RING_CNT 256 399#define TI_MINI_RX_RING_CNT 1024 400#define TI_RETURN_RING_CNT 2048 401 402#define TI_MAXTXSEGS 32 403 404/* 405 * Possible TX ring sizes. 406 */ 407#define TI_TX_RING_CNT_128 128 408#define TI_TX_RING_BASE_128 0x3800 409 410#define TI_TX_RING_CNT_256 256 411#define TI_TX_RING_BASE_256 0x3000 412 413#define TI_TX_RING_CNT_512 512 414#define TI_TX_RING_BASE_512 0x2000 415 416#define TI_TX_RING_CNT TI_TX_RING_CNT_512 417#define TI_TX_RING_BASE TI_TX_RING_BASE_512 418 419/* 420 * The Tigon can have up to 8MB of external SRAM, however the Tigon 1 421 * is limited to 2MB total, and in general I think most adapters have 422 * around 1MB. We use this value for zeroing the NIC's SRAM, so to 423 * be safe we use the largest possible value (zeroing memory that 424 * isn't there doesn't hurt anything). 425 */ 426#define TI_MEM_MAX 0x7FFFFF 427 428/* 429 * Maximum register address on the Tigon. 430 */ 431#define TI_REG_MAX 0x3fff 432 433/* 434 * These values were taken from Alteon's tg.h. 435 */ 436#define TI_BEG_SRAM 0x0 /* host thinks it's here */ 437#define TI_BEG_SCRATCH 0xc00000 /* beg of scratch pad area */ 438#define TI_END_SRAM_II 0x800000 /* end of SRAM, for 2 MB stuffed */ 439#define TI_END_SCRATCH_II 0xc04000 /* end of scratch pad CPU A (16KB) */ 440#define TI_END_SCRATCH_B 0xc02000 /* end of scratch pad CPU B (8KB) */ 441#define TI_BEG_SCRATCH_B_DEBUG 0xd00000 /* beg of scratch pad for ioctl */ 442#define TI_END_SCRATCH_B_DEBUG 0xd02000 /* end of scratch pad for ioctl */ 443#define TI_SCRATCH_DEBUG_OFF 0x100000 /* offset for ioctl usage */ 444#define TI_END_SRAM_I 0x200000 /* end of SRAM, for 2 MB stuffed */ 445#define TI_END_SCRATCH_I 0xc00800 /* end of scratch pad area (2KB) */ 446#define TI_BEG_PROM 0x40000000 /* beg of PROM, special access */ 447#define TI_BEG_FLASH 0x80000000 /* beg of EEPROM, special access */ 448#define TI_END_FLASH 0x80100000 /* end of EEPROM for 1 MB stuff */ 449#define TI_BEG_SER_EEPROM 0xa0000000 /* beg of Serial EEPROM (fake out) */ 450#define TI_END_SER_EEPROM 0xa0002000 /* end of Serial EEPROM (fake out) */ 451#define TI_BEG_REGS 0xc0000000 /* beg of register area */ 452#define TI_END_REGS 0xc0000400 /* end of register area */ 453#define TI_END_WRITE_REGS 0xc0000180 /* can't write GPRs currently */ 454#define TI_BEG_REGS2 0xc0000200 /* beg of second writeable reg area */ 455/* the EEPROM is byte addressable in a pretty odd way */ 456#define EEPROM_BYTE_LOC 0xff000000 457 458/* 459 * From Alteon's tg.h. 460 */ 461#define TI_PROCESSOR_A 0 462#define TI_PROCESSOR_B 1 463#define TI_CPU_A TG_PROCESSOR_A 464#define TI_CPU_B TG_PROCESSOR_B 465 466/* 467 * Following macro can be used to access to any of the CPU registers 468 * It will adjust the address appropriately. 469 * Parameters: 470 * reg - The register to access, e.g TI_CPU_CONTROL 471 * cpu - cpu, i.e PROCESSOR_A or PROCESSOR_B (or TI_CPU_A or TI_CPU_B) 472 */ 473#define CPU_REG(reg, cpu) ((reg) + (cpu) * 0x100) 474 475/* 476 * Even on the alpha, pci addresses are 32-bit quantities 477 */ 478 479typedef struct { 480 u_int32_t ti_addr_hi; 481 u_int32_t ti_addr_lo; 482} ti_hostaddr; 483 484#define TI_HOSTADDR(x) x.ti_addr_lo 485 486static __inline void 487ti_hostaddr64(ti_hostaddr *x, bus_addr_t addr) 488{ 489 uint64_t baddr; 490 491 baddr = (uint64_t)addr; 492 x->ti_addr_lo = baddr & 0xffffffff; 493 x->ti_addr_hi = baddr >> 32; 494} 495 496/* 497 * Ring control block structure. The rules for the max_len field 498 * are as follows: 499 * 500 * For the send ring, max_len indicates the number of entries in the 501 * ring (128, 256 or 512). 502 * 503 * For the standard receive ring, max_len indicates the threshold 504 * used to decide when a frame should be put in the jumbo receive ring 505 * instead of the standard one. 506 * 507 * For the mini ring, max_len indicates the size of the buffers in the 508 * ring. This is the value used to decide when a frame is small enough 509 * to be placed in the mini ring. 510 * 511 * For the return receive ring, max_len indicates the number of entries 512 * in the ring. It can be one of 2048, 1024 or 0 (which is the same as 513 * 2048 for backwards compatibility). The value 1024 can only be used 514 * if the mini ring is disabled. 515 */ 516struct ti_rcb { 517 ti_hostaddr ti_hostaddr; 518#if BYTE_ORDER == BIG_ENDIAN 519 u_int16_t ti_max_len; 520 u_int16_t ti_flags; 521#else 522 u_int16_t ti_flags; 523 u_int16_t ti_max_len; 524#endif 525 u_int32_t ti_unused; 526}; 527 528#define TI_RCB_FLAG_TCP_UDP_CKSUM 0x00000001 529#define TI_RCB_FLAG_IP_CKSUM 0x00000002 530#define TI_RCB_FLAG_NO_PHDR_CKSUM 0x00000008 531#define TI_RCB_FLAG_VLAN_ASSIST 0x00000010 532#define TI_RCB_FLAG_COAL_UPD_ONLY 0x00000020 533#define TI_RCB_FLAG_HOST_RING 0x00000040 534#define TI_RCB_FLAG_IEEE_SNAP_CKSUM 0x00000080 535#define TI_RCB_FLAG_USE_EXT_RX_BD 0x00000100 536#define TI_RCB_FLAG_RING_DISABLED 0x00000200 537 538struct ti_producer { 539 u_int32_t ti_idx; 540 u_int32_t ti_unused; 541}; 542 543/* 544 * Tigon general information block. This resides in host memory 545 * and contains the status counters, ring control blocks and 546 * producer pointers. 547 */ 548 549struct ti_gib { 550 struct ti_stats ti_stats; 551 struct ti_rcb ti_ev_rcb; 552 struct ti_rcb ti_cmd_rcb; 553 struct ti_rcb ti_tx_rcb; 554 struct ti_rcb ti_std_rx_rcb; 555 struct ti_rcb ti_jumbo_rx_rcb; 556 struct ti_rcb ti_mini_rx_rcb; 557 struct ti_rcb ti_return_rcb; 558 ti_hostaddr ti_ev_prodidx_ptr; 559 ti_hostaddr ti_return_prodidx_ptr; 560 ti_hostaddr ti_tx_considx_ptr; 561 ti_hostaddr ti_refresh_stats_ptr; 562}; 563 564/* 565 * Buffer descriptor structures. There are basically three types 566 * of structures: normal receive descriptors, extended receive 567 * descriptors and transmit descriptors. The extended receive 568 * descriptors are optionally used only for the jumbo receive ring. 569 */ 570 571struct ti_rx_desc { 572 ti_hostaddr ti_addr; 573#if BYTE_ORDER == BIG_ENDIAN 574 u_int16_t ti_idx; 575 u_int16_t ti_len; 576#else 577 u_int16_t ti_len; 578 u_int16_t ti_idx; 579#endif 580#if BYTE_ORDER == BIG_ENDIAN 581 u_int16_t ti_type; 582 u_int16_t ti_flags; 583#else 584 u_int16_t ti_flags; 585 u_int16_t ti_type; 586#endif 587#if BYTE_ORDER == BIG_ENDIAN 588 u_int16_t ti_ip_cksum; 589 u_int16_t ti_tcp_udp_cksum; 590#else 591 u_int16_t ti_tcp_udp_cksum; 592 u_int16_t ti_ip_cksum; 593#endif 594#if BYTE_ORDER == BIG_ENDIAN 595 u_int16_t ti_error_flags; 596 u_int16_t ti_vlan_tag; 597#else 598 u_int16_t ti_vlan_tag; 599 u_int16_t ti_error_flags; 600#endif 601 u_int32_t ti_rsvd; 602 u_int32_t ti_opaque; 603}; 604 605struct ti_rx_desc_ext { 606 ti_hostaddr ti_addr1; 607 ti_hostaddr ti_addr2; 608 ti_hostaddr ti_addr3; 609#if BYTE_ORDER == BIG_ENDIAN 610 u_int16_t ti_len1; 611 u_int16_t ti_len2; 612#else 613 u_int16_t ti_len2; 614 u_int16_t ti_len1; 615#endif 616#if BYTE_ORDER == BIG_ENDIAN 617 u_int16_t ti_len3; 618 u_int16_t ti_rsvd0; 619#else 620 u_int16_t ti_rsvd0; 621 u_int16_t ti_len3; 622#endif 623 ti_hostaddr ti_addr0; 624#if BYTE_ORDER == BIG_ENDIAN 625 u_int16_t ti_idx; 626 u_int16_t ti_len0; 627#else 628 u_int16_t ti_len0; 629 u_int16_t ti_idx; 630#endif 631#if BYTE_ORDER == BIG_ENDIAN 632 u_int16_t ti_type; 633 u_int16_t ti_flags; 634#else 635 u_int16_t ti_flags; 636 u_int16_t ti_type; 637#endif 638#if BYTE_ORDER == BIG_ENDIAN 639 u_int16_t ti_ip_cksum; 640 u_int16_t ti_tcp_udp_cksum; 641#else 642 u_int16_t ti_tcp_udp_cksum; 643 u_int16_t ti_ip_cksum; 644#endif 645#if BYTE_ORDER == BIG_ENDIAN 646 u_int16_t ti_error_flags; 647 u_int16_t ti_vlan_tag; 648#else 649 u_int16_t ti_vlan_tag; 650 u_int16_t ti_error_flags; 651#endif 652 u_int32_t ti_rsvd1; 653 u_int32_t ti_opaque; 654}; 655 656/* 657 * Transmit descriptors are, mercifully, very small. 658 */ 659struct ti_tx_desc { 660 ti_hostaddr ti_addr; 661#if BYTE_ORDER == BIG_ENDIAN 662 u_int16_t ti_len; 663 u_int16_t ti_flags; 664#else 665 u_int16_t ti_flags; 666 u_int16_t ti_len; 667#endif 668#if BYTE_ORDER == BIG_ENDIAN 669 u_int16_t ti_rsvd; 670 u_int16_t ti_vlan_tag; 671#else 672 u_int16_t ti_vlan_tag; 673 u_int16_t ti_rsvd; 674#endif 675}; 676 677/* 678 * NOTE! On the Alpha, we have an alignment constraint. 679 * The first thing in the packet is a 14-byte Ethernet header. 680 * This means that the packet is misaligned. To compensate, 681 * we actually offset the data 2 bytes into the cluster. This 682 * aligns the packet after the Ethernet header at a 32-bit 683 * boundary. 684 */ 685 686#define TI_FRAMELEN 1518 687#define TI_JUMBO_FRAMELEN 9018 688#define TI_JUMBO_MTU (TI_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) 689#define TI_PAGE_SIZE PAGE_SIZE 690#define TI_MIN_FRAMELEN 60 691 692/* 693 * Buffer descriptor error flags. 694 */ 695#define TI_BDERR_CRC 0x0001 696#define TI_BDERR_COLLDETECT 0x0002 697#define TI_BDERR_LINKLOST 0x0004 698#define TI_BDERR_DECODE 0x0008 699#define TI_BDERR_ODD_NIBBLES 0x0010 700#define TI_BDERR_MAC_ABRT 0x0020 701#define TI_BDERR_RUNT 0x0040 702#define TI_BDERR_TRUNC 0x0080 703#define TI_BDERR_GIANT 0x0100 704 705/* 706 * Buffer descriptor flags. 707 */ 708#define TI_BDFLAG_TCP_UDP_CKSUM 0x0001 709#define TI_BDFLAG_IP_CKSUM 0x0002 710#define TI_BDFLAG_END 0x0004 711#define TI_BDFLAG_MORE 0x0008 712#define TI_BDFLAG_JUMBO_RING 0x0010 713#define TI_BDFLAG_UCAST_PKT 0x0020 714#define TI_BDFLAG_MCAST_PKT 0x0040 715#define TI_BDFLAG_BCAST_PKT 0x0060 716#define TI_BDFLAG_IP_FRAG 0x0080 717#define TI_BDFLAG_IP_FRAG_END 0x0100 718#define TI_BDFLAG_VLAN_TAG 0x0200 719#define TI_BDFLAG_ERROR 0x0400 720#define TI_BDFLAG_COAL_NOW 0x0800 721#define TI_BDFLAG_MINI_RING 0x1000 722 723/* 724 * Descriptor type flags. I think these only have meaning for 725 * the Tigon 1. I had to extract them from the sample driver source 726 * since they aren't in the manual. 727 */ 728#define TI_BDTYPE_TYPE_NULL 0x0000 729#define TI_BDTYPE_SEND_BD 0x0001 730#define TI_BDTYPE_RECV_BD 0x0002 731#define TI_BDTYPE_RECV_JUMBO_BD 0x0003 732#define TI_BDTYPE_RECV_BD_LAST 0x0004 733#define TI_BDTYPE_SEND_DATA 0x0005 734#define TI_BDTYPE_SEND_DATA_LAST 0x0006 735#define TI_BDTYPE_RECV_DATA 0x0007 736#define TI_BDTYPE_RECV_DATA_LAST 0x000b 737#define TI_BDTYPE_EVENT_RUPT 0x000c 738#define TI_BDTYPE_EVENT_NO_RUPT 0x000d 739#define TI_BDTYPE_ODD_START 0x000e 740#define TI_BDTYPE_UPDATE_STATS 0x000f 741#define TI_BDTYPE_SEND_DUMMY_DMA 0x0010 742#define TI_BDTYPE_EVENT_PROD 0x0011 743#define TI_BDTYPE_TX_CONS 0x0012 744#define TI_BDTYPE_RX_PROD 0x0013 745#define TI_BDTYPE_REFRESH_STATS 0x0014 746#define TI_BDTYPE_SEND_DATA_LAST_VLAN 0x0015 747#define TI_BDTYPE_SEND_DATA_COAL 0x0016 748#define TI_BDTYPE_SEND_DATA_LAST_COAL 0x0017 749#define TI_BDTYPE_SEND_DATA_LAST_VLAN_COAL 0x0018 750#define TI_BDTYPE_TX_CONS_NO_INTR 0x0019 751 752/* 753 * Tigon command structure. 754 */ 755struct ti_cmd_desc { 756 u_int32_t ti_cmdx; 757}; 758 759#define TI_CMD_CMD(cmd) (((((cmd)->ti_cmdx)) >> 24) & 0xff) 760#define TI_CMD_CODE(cmd) (((((cmd)->ti_cmdx)) >> 12) & 0xfff) 761#define TI_CMD_IDX(cmd) ((((cmd)->ti_cmdx)) & 0xfff) 762 763#define TI_CMD_HOST_STATE 0x01 764#define TI_CMD_CODE_STACK_UP 0x01 765#define TI_CMD_CODE_STACK_DOWN 0x02 766 767/* 768 * This command enables software address filtering. It's a workaround 769 * for a bug in the Tigon 1 and not implemented for the Tigon 2. 770 */ 771#define TI_CMD_FDR_FILTERING 0x02 772#define TI_CMD_CODE_FILT_ENB 0x01 773#define TI_CMD_CODE_FILT_DIS 0x02 774 775#define TI_CMD_SET_RX_PROD_IDX 0x03 /* obsolete */ 776#define TI_CMD_UPDATE_GENCOM 0x04 777#define TI_CMD_RESET_JUMBO_RING 0x05 778#define TI_CMD_SET_PARTIAL_RX_CNT 0x06 779#define TI_CMD_ADD_MCAST_ADDR 0x08 /* obsolete */ 780#define TI_CMD_DEL_MCAST_ADDR 0x09 /* obsolete */ 781 782#define TI_CMD_SET_PROMISC_MODE 0x0A 783#define TI_CMD_CODE_PROMISC_ENB 0x01 784#define TI_CMD_CODE_PROMISC_DIS 0x02 785 786#define TI_CMD_LINK_NEGOTIATION 0x0B 787#define TI_CMD_CODE_NEGOTIATE_BOTH 0x00 788#define TI_CMD_CODE_NEGOTIATE_GIGABIT 0x01 789#define TI_CMD_CODE_NEGOTIATE_10_100 0x02 790 791#define TI_CMD_SET_MAC_ADDR 0x0C 792#define TI_CMD_CLR_PROFILE 0x0D 793 794#define TI_CMD_SET_ALLMULTI 0x0E 795#define TI_CMD_CODE_ALLMULTI_ENB 0x01 796#define TI_CMD_CODE_ALLMULTI_DIS 0x02 797 798#define TI_CMD_CLR_STATS 0x0F 799#define TI_CMD_SET_RX_JUMBO_PROD_IDX 0x10 /* obsolete */ 800#define TI_CMD_RFRSH_STATS 0x11 801 802#define TI_CMD_EXT_ADD_MCAST 0x12 803#define TI_CMD_EXT_DEL_MCAST 0x13 804 805/* 806 * Utility macros to make issuing commands a little simpler. Assumes 807 * that 'sc' and 'cmd' are in local scope. 808 */ 809#define TI_DO_CMD(x, y, z) do { \ 810 cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z))); \ 811 ti_cmd(sc, &cmd); \ 812} while(0) 813 814#define TI_DO_CMD_EXT(x, y, z, v, w) do { \ 815 cmd.ti_cmdx = (((x) << 24) | ((y) << 12) | ((z))); \ 816 ti_cmd_ext(sc, &cmd, (v), (w)); \ 817} while(0) 818 819/* 820 * Other utility macros. 821 */ 822#define TI_INC(x, y) (x) = ((x) + 1) % y 823 824#define TI_UPDATE_JUMBOPROD(x, y) do { \ 825 if ((x)->ti_hwrev == TI_HWREV_TIGON) \ 826 TI_DO_CMD(TI_CMD_SET_RX_JUMBO_PROD_IDX, 0, (y)); \ 827 else \ 828 CSR_WRITE_4((x), TI_MB_JUMBORXPROD_IDX, (y)); \ 829} while(0) 830 831#define TI_UPDATE_MINIPROD(x, y) \ 832 CSR_WRITE_4((x), TI_MB_MINIRXPROD_IDX, (y)) 833 834#define TI_UPDATE_STDPROD(x, y) do { \ 835 if ((x)->ti_hwrev == TI_HWREV_TIGON) \ 836 TI_DO_CMD(TI_CMD_SET_RX_PROD_IDX, 0, (y)); \ 837 else \ 838 CSR_WRITE_4((x), TI_MB_STDRXPROD_IDX, (y)); \ 839} while(0) 840 841/* 842 * Tigon event structure. 843 */ 844struct ti_event_desc { 845 u_int32_t ti_eventx; 846 u_int32_t ti_rsvd; 847}; 848 849#define TI_EVENT_EVENT(e) (((((e)->ti_eventx)) >> 24) & 0xff) 850#define TI_EVENT_CODE(e) (((((e)->ti_eventx)) >> 12) & 0xfff) 851#define TI_EVENT_IDX(e) (((((e)->ti_eventx))) & 0xfff) 852 853/* 854 * Tigon events. 855 */ 856#define TI_EV_FIRMWARE_UP 0x01 857#define TI_EV_STATS_UPDATED 0x04 858 859#define TI_EV_LINKSTAT_CHANGED 0x06 860#define TI_EV_CODE_GIG_LINK_UP 0x01 861#define TI_EV_CODE_LINK_DOWN 0x02 862#define TI_EV_CODE_LINK_UP 0x03 863 864#define TI_EV_ERROR 0x07 865#define TI_EV_CODE_ERR_INVAL_CMD 0x01 866#define TI_EV_CODE_ERR_UNIMP_CMD 0x02 867#define TI_EV_CODE_ERR_BADCFG 0x03 868 869#define TI_EV_MCAST_UPDATED 0x08 870#define TI_EV_CODE_MCAST_ADD 0x01 871#define TI_EV_CODE_MCAST_DEL 0x02 872 873#define TI_EV_RESET_JUMBO_RING 0x09 874/* 875 * Register access macros. The Tigon always uses memory mapped register 876 * accesses and all registers must be accessed with 32 bit operations. 877 */ 878 879#define CSR_WRITE_4(sc, reg, val) \ 880 bus_space_write_4((sc)->ti_btag, (sc)->ti_bhandle, (reg), (val)) 881 882#define CSR_READ_4(sc, reg) \ 883 bus_space_read_4((sc)->ti_btag, (sc)->ti_bhandle, (reg)) 884 885#define TI_SETBIT(sc, reg, x) \ 886 CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) | (x))) 887#define TI_CLRBIT(sc, reg, x) \ 888 CSR_WRITE_4((sc), (reg), (CSR_READ_4((sc), (reg)) & ~(x))) 889 890/* 891 * Memory management stuff. Note: the SSLOTS, MSLOTS and JSLOTS 892 * values are tuneable. They control the actual amount of buffers 893 * allocated for the standard, mini and jumbo receive rings. 894 */ 895 896#define TI_SSLOTS 256 897#define TI_MSLOTS 256 898#define TI_JSLOTS 256 899 900#define TI_JRAWLEN (TI_JUMBO_FRAMELEN + ETHER_ALIGN) 901#define TI_JLEN (TI_JRAWLEN + (sizeof(u_int64_t) - \ 902 (TI_JRAWLEN % sizeof(u_int64_t)))) 903#define TI_JPAGESZ PAGE_SIZE 904#define TI_RESID (TI_JPAGESZ - (TI_JLEN * TI_JSLOTS) % TI_JPAGESZ) 905#define TI_JMEM ((TI_JLEN * TI_JSLOTS) + TI_RESID) 906 907struct ti_txdesc { 908 struct mbuf *tx_m; 909 bus_dmamap_t tx_dmamap; 910 STAILQ_ENTRY(ti_txdesc) tx_q; 911}; 912 913STAILQ_HEAD(ti_txdq, ti_txdesc); 914 915/* 916 * Ring structures. Most of these reside in host memory and we tell 917 * the NIC where they are via the ring control blocks. The exceptions 918 * are the tx and command rings, which live in NIC memory and which 919 * we access via the shared memory window. 920 */ 921struct ti_ring_data { 922 struct ti_rx_desc ti_rx_std_ring[TI_STD_RX_RING_CNT]; 923#ifdef TI_PRIVATE_JUMBOS 924 struct ti_rx_desc ti_rx_jumbo_ring[TI_JUMBO_RX_RING_CNT]; 925#else 926 struct ti_rx_desc_ext ti_rx_jumbo_ring[TI_JUMBO_RX_RING_CNT]; 927#endif 928 struct ti_rx_desc ti_rx_mini_ring[TI_MINI_RX_RING_CNT]; 929 struct ti_rx_desc ti_rx_return_ring[TI_RETURN_RING_CNT]; 930 struct ti_event_desc ti_event_ring[TI_EVENT_RING_CNT]; 931 struct ti_tx_desc ti_tx_ring[TI_TX_RING_CNT]; 932 /* 933 * Make sure producer structures are aligned on 32-byte cache 934 * line boundaries. 935 */ 936 struct ti_producer ti_ev_prodidx_r; 937 u_int32_t ti_pad0[6]; 938 struct ti_producer ti_return_prodidx_r; 939 u_int32_t ti_pad1[6]; 940 struct ti_producer ti_tx_considx_r; 941 u_int32_t ti_pad2[6]; 942 struct ti_gib ti_info; 943}; 944 945#define TI_RD_OFF(x) offsetof(struct ti_ring_data, x) 946 947/* 948 * Mbuf pointers. We need these to keep track of the virtual addresses 949 * of our mbuf chains since we can only convert from physical to virtual, 950 * not the other way around. 951 */ 952struct ti_chain_data { 953 struct ti_txdesc ti_txdesc[TI_TX_RING_CNT]; 954 struct ti_txdq ti_txfreeq; 955 struct ti_txdq ti_txbusyq; 956 struct mbuf *ti_rx_std_chain[TI_STD_RX_RING_CNT]; 957 bus_dmamap_t ti_rx_std_maps[TI_STD_RX_RING_CNT]; 958 struct mbuf *ti_rx_jumbo_chain[TI_JUMBO_RX_RING_CNT]; 959 bus_dmamap_t ti_rx_jumbo_maps[TI_JUMBO_RX_RING_CNT]; 960 struct mbuf *ti_rx_mini_chain[TI_MINI_RX_RING_CNT]; 961 bus_dmamap_t ti_rx_mini_maps[TI_MINI_RX_RING_CNT]; 962 /* Stick the jumbo mem management stuff here too. */ 963 caddr_t ti_jslots[TI_JSLOTS]; 964 void *ti_jumbo_buf; 965}; 966 967struct ti_type { 968 u_int16_t ti_vid; 969 u_int16_t ti_did; 970 char *ti_name; 971}; 972 973#define TI_HWREV_TIGON 0x01 974#define TI_HWREV_TIGON_II 0x02 975#define TI_TIMEOUT 1000 976#define TI_TXCONS_UNSET 0xFFFF /* impossible value */ 977 978struct ti_mc_entry { 979 struct ether_addr mc_addr; 980 SLIST_ENTRY(ti_mc_entry) mc_entries; 981}; 982 983struct ti_jpool_entry { 984 int slot; 985 SLIST_ENTRY(ti_jpool_entry) jpool_entries; 986}; 987 988typedef enum { 989 TI_FLAG_NONE = 0x00, 990 TI_FLAG_DEBUGING = 0x01, 991 TI_FLAG_WAIT_FOR_LINK = 0x02 992} ti_flag_vals; 993 994struct ti_softc { 995 device_t ti_dev; 996 struct ifnet *ti_ifp; 997 bus_space_handle_t ti_bhandle; 998 bus_space_tag_t ti_btag; 999 void *ti_intrhand; 1000 struct resource *ti_irq; 1001 struct resource *ti_res; 1002 struct ifmedia ifmedia; /* media info */ 1003 u_int8_t ti_unit; /* interface number */ 1004 u_int8_t ti_hwrev; /* Tigon rev (1 or 2) */ 1005 u_int8_t ti_copper; /* 1000baseTX card */ 1006 u_int8_t ti_linkstat; /* Link state */ 1007 int ti_hdrsplit; /* enable header splitting */ 1008 bus_dma_tag_t ti_parent_dmat; 1009 bus_dma_tag_t ti_jumbo_dmat; 1010 bus_dmamap_t ti_jumbo_dmamap; 1011 bus_dma_tag_t ti_mbuftx_dmat; 1012 bus_dma_tag_t ti_mbufrx_dmat; 1013 bus_dma_tag_t ti_rdata_dmat; 1014 bus_dmamap_t ti_rdata_dmamap; 1015 bus_addr_t ti_rdata_phys; 1016 struct ti_ring_data *ti_rdata; /* rings */ 1017 struct ti_chain_data ti_cdata; /* mbufs */ 1018#define ti_ev_prodidx ti_rdata->ti_ev_prodidx_r 1019#define ti_return_prodidx ti_rdata->ti_return_prodidx_r 1020#define ti_tx_considx ti_rdata->ti_tx_considx_r 1021 int ti_tx_saved_prodidx; 1022 int ti_tx_saved_considx; 1023 int ti_rx_saved_considx; 1024 int ti_ev_saved_considx; 1025 int ti_cmd_saved_prodidx; 1026 int ti_std; /* current std ring head */ 1027 int ti_mini; /* current mini ring head */ 1028 int ti_jumbo; /* current jumo ring head */ 1029 SLIST_HEAD(__ti_mchead, ti_mc_entry) ti_mc_listhead; 1030 SLIST_HEAD(__ti_jfreehead, ti_jpool_entry) ti_jfree_listhead; 1031 SLIST_HEAD(__ti_jinusehead, ti_jpool_entry) ti_jinuse_listhead; 1032 u_int32_t ti_stat_ticks; 1033 u_int32_t ti_rx_coal_ticks; 1034 u_int32_t ti_tx_coal_ticks; 1035 u_int32_t ti_rx_max_coal_bds; 1036 u_int32_t ti_tx_max_coal_bds; 1037 u_int32_t ti_tx_buf_ratio; 1038 int ti_if_flags; 1039 int ti_txcnt; 1040 struct mtx ti_mtx; 1041 struct callout ti_watchdog; 1042 int ti_timer; 1043 ti_flag_vals ti_flags; 1044 struct cdev *dev; 1045}; 1046 1047#define TI_LOCK(_sc) mtx_lock(&(_sc)->ti_mtx) 1048#define TI_UNLOCK(_sc) mtx_unlock(&(_sc)->ti_mtx) 1049#define TI_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->ti_mtx, MA_OWNED) 1050 1051/* 1052 * Microchip Technology 24Cxx EEPROM control bytes 1053 */ 1054#define EEPROM_CTL_READ 0xA1 /* 0101 0001 */ 1055#define EEPROM_CTL_WRITE 0xA0 /* 0101 0000 */ 1056 1057/* 1058 * Note that EEPROM_START leaves transmission enabled. 1059 */ 1060#define EEPROM_START do { \ 1061 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock pin high */\ 1062 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Set DATA bit to 1 */ \ 1063 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit to write bit */\ 1064 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA bit to 0 again */\ 1065 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */ \ 1066} while(0) 1067 1068/* 1069 * EEPROM_STOP ends access to the EEPROM and clears the ETXEN bit so 1070 * that no further data can be written to the EEPROM I/O pin. 1071 */ 1072#define EEPROM_STOP do { \ 1073 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit */ \ 1074 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Pull DATA to 0 */ \ 1075 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock high */ \ 1076 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Enable xmit */ \ 1077 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); /* Toggle DATA to 1 */ \ 1078 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); /* Disable xmit. */ \ 1079 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); /* Pull clock low again */ \ 1080} while(0) 1081