cissvar.h revision 204648
1/*- 2 * Copyright (c) 2001 Michael Smith 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/dev/ciss/cissvar.h 204648 2010-03-03 17:58:41Z mav $ 27 */ 28 29/* 30 * CISS adapter driver datastructures 31 */ 32 33typedef STAILQ_HEAD(, ciss_request) cr_qhead_t; 34 35/************************************************************************ 36 * Tunable parameters 37 */ 38 39/* 40 * There is no guaranteed upper bound on the number of concurrent 41 * commands an adapter may claim to support. Cap it at a reasonable 42 * value. 43 */ 44#define CISS_MAX_REQUESTS 1024 45 46/* 47 * Maximum number of logical drives we support. 48 */ 49#define CISS_MAX_LOGICAL 15 50 51/* 52 * Maximum number of physical devices we support. 53 */ 54#define CISS_MAX_PHYSICAL 1024 55 56/* 57 * Interrupt reduction can be controlled by tuning the interrupt 58 * coalesce delay and count paramters. The delay (in microseconds) 59 * defers delivery of interrupts to increase the chance of there being 60 * more than one completed command ready when the interrupt is 61 * delivered. The count expedites the delivery of the interrupt when 62 * the given number of commands are ready. 63 * 64 * If the delay is set to 0, interrupts are delivered immediately. 65 */ 66#define CISS_INTERRUPT_COALESCE_DELAY 0 67#define CISS_INTERRUPT_COALESCE_COUNT 16 68 69/* 70 * Heartbeat routine timeout in seconds. Note that since event 71 * handling is performed on a callback basis, we don't need this to 72 * run very often. 73 */ 74#define CISS_HEARTBEAT_RATE 10 75 76/************************************************************************ 77 * Compatibility with older versions of FreeBSD 78 */ 79#if __FreeBSD_version < 440001 80#warning testing old-FreeBSD compat 81typedef struct proc d_thread_t; 82#endif 83 84/************************************************************************ 85 * Driver version. Only really significant to the ACU interface. 86 */ 87#define CISS_DRIVER_VERSION 20011201 88 89/************************************************************************ 90 * Driver data structures 91 */ 92 93/* 94 * Each command issued to the adapter is managed by a request 95 * structure. 96 */ 97struct ciss_request 98{ 99 STAILQ_ENTRY(ciss_request) cr_link; 100 int cr_onq; /* which queue we are on */ 101 102 struct ciss_softc *cr_sc; /* controller softc */ 103 void *cr_data; /* data buffer */ 104 u_int32_t cr_length; /* data length */ 105 bus_dmamap_t cr_datamap; /* DMA map for data */ 106 struct ciss_command *cr_cc; 107 uint32_t cr_ccphys; 108 int cr_tag; 109 int cr_flags; 110#define CISS_REQ_MAPPED (1<<0) /* data mapped */ 111#define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */ 112#define CISS_REQ_POLL (1<<2) /* submitter polling */ 113#define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */ 114#define CISS_REQ_DATAIN (1<<4) /* data adapter->host */ 115#define CISS_REQ_BUSY (1<<5) /* controller has req */ 116 117 void (* cr_complete)(struct ciss_request *); 118 void *cr_private; 119 int cr_sg_tag; 120#define CISS_SG_MAX ((CISS_SG_FETCH_MAX << 1) | 0x1) 121#define CISS_SG_1 ((CISS_SG_FETCH_1 << 1) | 0x01) 122#define CISS_SG_2 ((CISS_SG_FETCH_2 << 1) | 0x01) 123#define CISS_SG_4 ((CISS_SG_FETCH_4 << 1) | 0x01) 124#define CISS_SG_8 ((CISS_SG_FETCH_8 << 1) | 0x01) 125#define CISS_SG_16 ((CISS_SG_FETCH_16 << 1) | 0x01) 126#define CISS_SG_32 ((CISS_SG_FETCH_32 << 1) | 0x01) 127#define CISS_SG_NONE ((CISS_SG_FETCH_NONE << 1) | 0x01) 128}; 129 130/* 131 * The adapter command structure is defined with a zero-length 132 * scatter/gather list size. In practise, we want space for a 133 * scatter-gather list, and we also want to avoid having commands 134 * cross page boundaries. 135 * 136 * The size of the ciss_command is 52 bytes. 65 s/g elements are reserved 137 * to allow a max i/o size of 256k. This gives a total command size of 138 * 1120 bytes, including the 32 byte alignment padding. Modern controllers 139 * seem to saturate nicely at this value. 140 */ 141 142#define CISS_MAX_SG_ELEMENTS 65 143#define CISS_COMMAND_ALIGN 32 144#define CISS_COMMAND_SG_LENGTH (sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS) 145#define CISS_COMMAND_ALLOC_SIZE (roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN)) 146 147/* 148 * Per-logical-drive data. 149 */ 150struct ciss_ldrive 151{ 152 union ciss_device_address cl_address; 153 union ciss_device_address *cl_controller; 154 int cl_status; 155#define CISS_LD_NONEXISTENT 0 156#define CISS_LD_ONLINE 1 157#define CISS_LD_OFFLINE 2 158 159 int cl_update; 160 161 struct ciss_bmic_id_ldrive *cl_ldrive; 162 struct ciss_bmic_id_lstatus *cl_lstatus; 163 struct ciss_ldrive_geometry cl_geometry; 164 165 char cl_name[16]; /* device name */ 166}; 167 168/* 169 * Per-physical-drive data 170 */ 171struct ciss_pdrive 172{ 173 union ciss_device_address cp_address; 174 int cp_online; 175}; 176 177#define CISS_PHYSICAL_SHIFT 5 178#define CISS_PHYSICAL_BASE (1 << CISS_PHYSICAL_SHIFT) 179#define CISS_MAX_PHYSTGT 256 180 181#define CISS_IS_PHYSICAL(bus) (bus >= CISS_PHYSICAL_BASE) 182#define CISS_CAM_TO_PBUS(bus) (bus - CISS_PHYSICAL_BASE) 183 184/* 185 * Per-adapter data 186 */ 187struct ciss_softc 188{ 189 /* bus connections */ 190 device_t ciss_dev; /* bus attachment */ 191 struct cdev *ciss_dev_t; /* control device */ 192 193 struct resource *ciss_regs_resource; /* register interface window */ 194 int ciss_regs_rid; /* resource ID */ 195 bus_space_handle_t ciss_regs_bhandle; /* bus space handle */ 196 bus_space_tag_t ciss_regs_btag; /* bus space tag */ 197 198 struct resource *ciss_cfg_resource; /* config struct interface window */ 199 int ciss_cfg_rid; /* resource ID */ 200 struct ciss_config_table *ciss_cfg; /* config table in adapter memory */ 201 struct ciss_perf_config *ciss_perf; /* config table for the performant */ 202 struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */ 203 u_int32_t ciss_heartbeat; /* last heartbeat value */ 204 int ciss_heart_attack; /* number of times we have seen this value */ 205 206 int ciss_msi; 207 struct resource *ciss_irq_resource; /* interrupt */ 208 int ciss_irq_rid[CISS_MSI_COUNT]; /* resource ID */ 209 void *ciss_intr; /* interrupt handle */ 210 211 bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */ 212 bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */ 213 214 u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */ 215 216 uint64_t *ciss_reply; 217 int ciss_cycle; 218 int ciss_rqidx; 219 bus_dma_tag_t ciss_reply_dmat; 220 bus_dmamap_t ciss_reply_map; 221 uint32_t ciss_reply_phys; 222 223 int ciss_max_requests; 224 struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */ 225 void *ciss_command; /* command structures */ 226 bus_dma_tag_t ciss_command_dmat; /* command DMA tag */ 227 bus_dmamap_t ciss_command_map; /* command DMA map */ 228 u_int32_t ciss_command_phys; /* command array base address */ 229 cr_qhead_t ciss_free; /* requests available for reuse */ 230 cr_qhead_t ciss_notify; /* requests which are defered for processing */ 231 struct proc *ciss_notify_thread; 232 233 struct callout ciss_periodic; /* periodic event handling */ 234 struct ciss_request *ciss_periodic_notify; /* notify callback request */ 235 236 struct mtx ciss_mtx; 237 struct ciss_ldrive **ciss_logical; 238 struct ciss_pdrive **ciss_physical; 239 union ciss_device_address *ciss_controllers; /* controller address */ 240 int ciss_max_bus_number; /* maximum bus number */ 241 int ciss_max_logical_bus; 242 int ciss_max_physical_bus; 243 244 struct cam_devq *ciss_cam_devq; 245 struct cam_sim **ciss_cam_sim; 246 247 int ciss_soft_reset; 248 249 int ciss_flags; 250#define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */ 251#define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */ 252#define CISS_FLAG_ABORTING (1<<2) /* driver is going away */ 253#define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */ 254#define CISS_FLAG_BUSY (1<<4) /* no free commands */ 255 256#define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */ 257#define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */ 258#define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */ 259 260 struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */ 261}; 262 263/************************************************************************ 264 * Debugging/diagnostic output. 265 */ 266 267/* 268 * Debugging levels: 269 * 0 - quiet, only emit warnings 270 * 1 - talkative, log major events, but nothing on the I/O path 271 * 2 - noisy, log events on the I/O path 272 * 3 - extremely noisy, log items in loops 273 */ 274#ifdef CISS_DEBUG 275# define debug(level, fmt, args...) \ 276 do { \ 277 if (level <= CISS_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); \ 278 } while(0) 279# define debug_called(level) \ 280 do { \ 281 if (level <= CISS_DEBUG) printf("%s: called\n", __func__); \ 282 } while(0) 283# define debug_struct(s) printf(" SIZE %s: %zu\n", #s, sizeof(struct s)) 284# define debug_union(s) printf(" SIZE %s: %zu\n", #s, sizeof(union s)) 285# define debug_type(s) printf(" SIZE %s: %zu\n", #s, sizeof(s)) 286# define debug_field(s, f) printf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f))) 287# define debug_const(c) printf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c); 288#else 289# define debug(level, fmt, args...) 290# define debug_called(level) 291# define debug_struct(s) 292# define debug_union(s) 293# define debug_type(s) 294# define debug_field(s, f) 295# define debug_const(c) 296#endif 297 298#define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args) 299 300/************************************************************************ 301 * Queue primitives 302 */ 303 304#define CISSQ_ADD(sc, qname) \ 305 do { \ 306 struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \ 307 \ 308 qs->q_length++; \ 309 if (qs->q_length > qs->q_max) \ 310 qs->q_max = qs->q_length; \ 311 } while(0) 312 313#define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length-- 314#define CISSQ_INIT(sc, qname) \ 315 do { \ 316 sc->ciss_qstat[qname].q_length = 0; \ 317 sc->ciss_qstat[qname].q_max = 0; \ 318 } while(0) 319 320 321#define CISSQ_REQUEST_QUEUE(name, index) \ 322static __inline void \ 323ciss_initq_ ## name (struct ciss_softc *sc) \ 324{ \ 325 STAILQ_INIT(&sc->ciss_ ## name); \ 326 CISSQ_INIT(sc, index); \ 327} \ 328static __inline void \ 329ciss_enqueue_ ## name (struct ciss_request *cr) \ 330{ \ 331 \ 332 STAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 333 CISSQ_ADD(cr->cr_sc, index); \ 334 cr->cr_onq = index; \ 335} \ 336static __inline void \ 337ciss_requeue_ ## name (struct ciss_request *cr) \ 338{ \ 339 \ 340 STAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \ 341 CISSQ_ADD(cr->cr_sc, index); \ 342 cr->cr_onq = index; \ 343} \ 344static __inline struct ciss_request * \ 345ciss_dequeue_ ## name (struct ciss_softc *sc) \ 346{ \ 347 struct ciss_request *cr; \ 348 \ 349 if ((cr = STAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \ 350 STAILQ_REMOVE_HEAD(&sc->ciss_ ## name, cr_link); \ 351 CISSQ_REMOVE(sc, index); \ 352 cr->cr_onq = -1; \ 353 } \ 354 return(cr); \ 355} \ 356struct hack 357 358CISSQ_REQUEST_QUEUE(free, CISSQ_FREE); 359CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY); 360 361static __inline void 362ciss_enqueue_complete(struct ciss_request *ac, cr_qhead_t *head) 363{ 364 365 STAILQ_INSERT_TAIL(head, ac, cr_link); 366} 367 368static __inline struct ciss_request * 369ciss_dequeue_complete(struct ciss_softc *sc, cr_qhead_t *head) 370{ 371 struct ciss_request *ac; 372 373 if ((ac = STAILQ_FIRST(head)) != NULL) 374 STAILQ_REMOVE_HEAD(head, cr_link); 375 return(ac); 376} 377 378/******************************************************************************** 379 * space-fill a character string 380 */ 381static __inline void 382padstr(char *targ, const char *src, int len) 383{ 384 while (len-- > 0) { 385 if (*src != 0) { 386 *targ++ = *src++; 387 } else { 388 *targ++ = ' '; 389 } 390 } 391} 392 393#define ciss_report_request(a, b, c) \ 394 _ciss_report_request(a, b, c, __FUNCTION__) 395