ata-cbus.c revision 296373
1/*-
2 * Copyright (c) 2002 - 2008 S��ren Schmidt <sos@FreeBSD.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer,
10 *    without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 */
26
27#include <sys/cdefs.h>
28__FBSDID("$FreeBSD: releng/10.3/sys/dev/ata/ata-cbus.c 249213 2013-04-06 19:12:49Z marius $");
29
30#include <sys/param.h>
31#include <sys/systm.h>
32#include <sys/kernel.h>
33#include <sys/ata.h>
34#include <sys/bus.h>
35#include <sys/malloc.h>
36#include <sys/module.h>
37#include <sys/conf.h>
38#include <sys/sema.h>
39#include <sys/taskqueue.h>
40#include <vm/uma.h>
41#include <machine/resource.h>
42#include <machine/bus.h>
43#include <sys/rman.h>
44#include <isa/isavar.h>
45#include <dev/ata/ata-all.h>
46#include <ata_if.h>
47
48/* local vars */
49struct ata_cbus_controller {
50    struct resource *io;
51    struct resource *ctlio;
52    struct resource *bankio;
53    struct resource *irq;
54    void *ih;
55    int channels;
56    struct {
57	void (*function)(void *);
58	void *argument;
59    } interrupt[2];
60};
61
62/* local prototypes */
63static void ata_cbus_intr(void *);
64
65static int
66ata_cbus_probe(device_t dev)
67{
68    struct resource *io;
69    int rid;
70    u_long tmp;
71
72    /* dont probe PnP devices */
73    if (isa_get_vendorid(dev))
74	return (ENXIO);
75
76    /* allocate the ioport range */
77    rid = ATA_IOADDR_RID;
78    if (!(io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
79				  ATA_PC98_IOSIZE, RF_ACTIVE)))
80	return ENOMEM;
81
82    /* calculate & set the altport range */
83    rid = ATA_PC98_CTLADDR_RID;
84    if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) {
85	bus_set_resource(dev, SYS_RES_IOPORT, rid,
86			 rman_get_start(io)+ATA_PC98_CTLOFFSET, ATA_CTLIOSIZE);
87    }
88
89    /* calculate & set the bank range */
90    rid = ATA_PC98_BANKADDR_RID;
91    if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &tmp, &tmp)) {
92	bus_set_resource(dev, SYS_RES_IOPORT, rid,
93			 ATA_PC98_BANK, ATA_PC98_BANKIOSIZE);
94    }
95
96    bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io);
97    return 0;
98}
99
100static int
101ata_cbus_attach(device_t dev)
102{
103    struct ata_cbus_controller *ctlr = device_get_softc(dev);
104    device_t child;
105    int rid, unit;
106
107    /* allocate resources */
108    rid = ATA_IOADDR_RID;
109    if (!(ctlr->io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
110					ATA_PC98_IOSIZE, RF_ACTIVE)))
111       return ENOMEM;
112
113    rid = ATA_PC98_CTLADDR_RID;
114    if (!(ctlr->ctlio =
115	  bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
116			     rman_get_start(ctlr->io) + ATA_PC98_CTLOFFSET, ~0,
117			     ATA_CTLIOSIZE, RF_ACTIVE))) {
118	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
119	return ENOMEM;
120    }
121
122    rid = ATA_PC98_BANKADDR_RID;
123    if (!(ctlr->bankio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
124					    ATA_PC98_BANK, ~0,
125					    ATA_PC98_BANKIOSIZE, RF_ACTIVE))) {
126	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
127	bus_release_resource(dev, SYS_RES_IOPORT, ATA_CTLADDR_RID, ctlr->ctlio);
128	return ENOMEM;
129    }
130
131    rid = ATA_IRQ_RID;
132    if (!(ctlr->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
133					     RF_ACTIVE | RF_SHAREABLE))) {
134	device_printf(dev, "unable to alloc interrupt\n");
135	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
136	bus_release_resource(dev, SYS_RES_IOPORT, ATA_CTLADDR_RID, ctlr->ctlio);
137	bus_release_resource(dev, SYS_RES_IOPORT,
138			     ATA_PC98_BANKADDR_RID, ctlr->bankio);
139	return ENXIO;
140    }
141
142    if ((bus_setup_intr(dev, ctlr->irq, ATA_INTR_FLAGS,
143			NULL, ata_cbus_intr, ctlr, &ctlr->ih))) {
144	device_printf(dev, "unable to setup interrupt\n");
145	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, ctlr->io);
146	bus_release_resource(dev, SYS_RES_IOPORT, ATA_CTLADDR_RID, ctlr->ctlio);
147	bus_release_resource(dev, SYS_RES_IOPORT,
148			     ATA_PC98_BANKADDR_RID, ctlr->bankio);
149	bus_release_resource(dev, SYS_RES_IOPORT, ATA_IRQ_RID, ctlr->irq);
150	return ENXIO;
151    }
152
153	/* Work around the lack of channel serialization in ATA_CAM. */
154	ctlr->channels = 1;
155	device_printf(dev, "second channel ignored\n");
156
157    for (unit = 0; unit < ctlr->channels; unit++) {
158	child = device_add_child(dev, "ata", unit);
159	if (child == NULL)
160	    device_printf(dev, "failed to add ata child device\n");
161	else
162	    device_set_ivars(child, (void *)(intptr_t)unit);
163    }
164
165    bus_generic_attach(dev);
166    return (0);
167}
168
169static struct resource *
170ata_cbus_alloc_resource(device_t dev, device_t child, int type, int *rid,
171			u_long start, u_long end, u_long count, u_int flags)
172{
173    struct ata_cbus_controller *ctlr = device_get_softc(dev);
174
175    if (type == SYS_RES_IOPORT) {
176	switch (*rid) {
177	case ATA_IOADDR_RID:
178	    return ctlr->io;
179	case ATA_CTLADDR_RID:
180	    return ctlr->ctlio;
181	}
182    }
183    if (type == SYS_RES_IRQ)
184	return ctlr->irq;
185    return 0;
186}
187
188static int
189ata_cbus_setup_intr(device_t dev, device_t child, struct resource *irq,
190	       int flags, driver_filter_t *filter, driver_intr_t *intr,
191	       void *arg, void **cookiep)
192{
193    struct ata_cbus_controller *controller = device_get_softc(dev);
194    int unit = ((struct ata_channel *)device_get_softc(child))->unit;
195
196    if (filter != NULL) {
197	    printf("ata-cbus.c: we cannot use a filter here\n");
198	    return (EINVAL);
199    }
200    controller->interrupt[unit].function = intr;
201    controller->interrupt[unit].argument = arg;
202    *cookiep = controller;
203
204    return 0;
205}
206
207static int
208ata_cbus_print_child(device_t dev, device_t child)
209{
210    struct ata_channel *ch = device_get_softc(child);
211    int retval = 0;
212
213    retval += bus_print_child_header(dev, child);
214    retval += printf(" at bank %d", ch->unit);
215    retval += bus_print_child_footer(dev, child);
216    return retval;
217}
218
219static void
220ata_cbus_intr(void *data)
221{
222    struct ata_cbus_controller *ctlr = data;
223    struct ata_channel *ch;
224    int unit;
225
226    for (unit = 0; unit < ctlr->channels; unit++) {
227	if (!(ch = ctlr->interrupt[unit].argument))
228	    continue;
229	ctlr->interrupt[unit].function(ch);
230    }
231}
232
233static device_method_t ata_cbus_methods[] = {
234    /* device interface */
235    DEVMETHOD(device_probe,             ata_cbus_probe),
236    DEVMETHOD(device_attach,            ata_cbus_attach),
237//  DEVMETHOD(device_detach,            ata_cbus_detach),
238
239    /* bus methods */
240    DEVMETHOD(bus_alloc_resource,       ata_cbus_alloc_resource),
241    DEVMETHOD(bus_setup_intr,           ata_cbus_setup_intr),
242    DEVMETHOD(bus_print_child,          ata_cbus_print_child),
243
244    DEVMETHOD_END
245};
246
247static driver_t ata_cbus_driver = {
248    "atacbus",
249    ata_cbus_methods,
250    sizeof(struct ata_cbus_controller),
251};
252
253static devclass_t ata_cbus_devclass;
254
255DRIVER_MODULE(atacbus, isa, ata_cbus_driver, ata_cbus_devclass, NULL, NULL);
256
257static int
258ata_cbuschannel_probe(device_t dev)
259{
260    char buffer[32];
261
262    sprintf(buffer, "ATA channel %d", (int)(intptr_t)device_get_ivars(dev));
263    device_set_desc_copy(dev, buffer);
264
265    return ata_probe(dev);
266}
267
268static int
269ata_cbuschannel_attach(device_t dev)
270{
271    struct ata_cbus_controller *ctlr = device_get_softc(device_get_parent(dev));
272    struct ata_channel *ch = device_get_softc(dev);
273    int i;
274
275    if (ch->attached)
276	return (0);
277    ch->attached = 1;
278
279    ch->unit = (intptr_t)device_get_ivars(dev);
280    /* setup the resource vectors */
281    for (i = ATA_DATA; i <= ATA_COMMAND; i ++) {
282	ch->r_io[i].res = ctlr->io;
283	ch->r_io[i].offset = i << 1;
284    }
285    ch->r_io[ATA_CONTROL].res = ctlr->ctlio;
286    ch->r_io[ATA_CONTROL].offset = 0;
287    ch->r_io[ATA_IDX_ADDR].res = ctlr->io;
288    ata_default_registers(dev);
289
290    /* initialize softc for this channel */
291    ch->flags |= ATA_USE_16BIT;
292    ata_generic_hw(dev);
293
294    return ata_attach(dev);
295}
296
297static int
298ata_cbuschannel_detach(device_t dev)
299{
300    struct ata_channel *ch = device_get_softc(dev);
301
302    if (!ch->attached)
303	return (0);
304    ch->attached = 0;
305
306    return ata_detach(dev);
307}
308
309static int
310ata_cbuschannel_suspend(device_t dev)
311{
312    struct ata_channel *ch = device_get_softc(dev);
313
314    if (!ch->attached)
315	return (0);
316
317    return ata_suspend(dev);
318}
319
320static int
321ata_cbuschannel_resume(device_t dev)
322{
323    struct ata_channel *ch = device_get_softc(dev);
324
325    if (!ch->attached)
326	return (0);
327
328    return ata_resume(dev);
329}
330
331static device_method_t ata_cbuschannel_methods[] = {
332    /* device interface */
333    DEVMETHOD(device_probe,     ata_cbuschannel_probe),
334    DEVMETHOD(device_attach,    ata_cbuschannel_attach),
335    DEVMETHOD(device_detach,    ata_cbuschannel_detach),
336    DEVMETHOD(device_suspend,   ata_cbuschannel_suspend),
337    DEVMETHOD(device_resume,    ata_cbuschannel_resume),
338    DEVMETHOD_END
339};
340
341static driver_t ata_cbuschannel_driver = {
342    "ata",
343    ata_cbuschannel_methods,
344    sizeof(struct ata_channel),
345};
346
347DRIVER_MODULE(ata, atacbus, ata_cbuschannel_driver, ata_devclass, NULL, NULL);
348MODULE_DEPEND(ata, ata, 1, 1, 1);
349