advansys.c revision 163896
1/*- 2 * Generic driver for the Advanced Systems Inc. SCSI controllers 3 * Product specific probe and attach routines can be found in: 4 * 5 * i386/isa/adv_isa.c ABP5140, ABP542, ABP5150, ABP842, ABP852 6 * i386/eisa/adv_eisa.c ABP742, ABP752 7 * pci/adv_pci.c ABP920, ABP930, ABP930U, ABP930UA, ABP940, ABP940U, 8 * ABP940UA, ABP950, ABP960, ABP960U, ABP960UA, 9 * ABP970, ABP970U 10 * 11 * Copyright (c) 1996-2000 Justin Gibbs. 12 * All rights reserved. 13 * 14 * Redistribution and use in source and binary forms, with or without 15 * modification, are permitted provided that the following conditions 16 * are met: 17 * 1. Redistributions of source code must retain the above copyright 18 * notice, this list of conditions, and the following disclaimer, 19 * without modification, immediately at the beginning of the file. 20 * 2. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35/*- 36 * Ported from: 37 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 38 * 39 * Copyright (c) 1995-1997 Advanced System Products, Inc. 40 * All Rights Reserved. 41 * 42 * Redistribution and use in source and binary forms, with or without 43 * modification, are permitted provided that redistributions of source 44 * code retain the above copyright notice and this comment without 45 * modification. 46 */ 47 48#include <sys/cdefs.h> 49__FBSDID("$FreeBSD: head/sys/dev/advansys/advansys.c 163896 2006-11-02 00:54:38Z mjacob $"); 50 51#include <sys/param.h> 52#include <sys/systm.h> 53#include <sys/malloc.h> 54#include <sys/kernel.h> 55#include <sys/lock.h> 56#include <sys/mutex.h> 57 58#include <machine/bus.h> 59#include <machine/resource.h> 60#include <sys/bus.h> 61#include <sys/rman.h> 62 63#include <cam/cam.h> 64#include <cam/cam_ccb.h> 65#include <cam/cam_sim.h> 66#include <cam/cam_xpt_sim.h> 67#include <cam/cam_debug.h> 68 69#include <cam/scsi/scsi_all.h> 70#include <cam/scsi/scsi_message.h> 71 72#include <vm/vm.h> 73#include <vm/vm_param.h> 74#include <vm/pmap.h> 75 76#include <dev/advansys/advansys.h> 77 78static void adv_action(struct cam_sim *sim, union ccb *ccb); 79static void adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 80 int nsegments, int error); 81static void adv_poll(struct cam_sim *sim); 82static void adv_run_doneq(struct adv_softc *adv); 83static struct adv_ccb_info * 84 adv_alloc_ccb_info(struct adv_softc *adv); 85static void adv_destroy_ccb_info(struct adv_softc *adv, 86 struct adv_ccb_info *cinfo); 87static __inline struct adv_ccb_info * 88 adv_get_ccb_info(struct adv_softc *adv); 89static __inline void adv_free_ccb_info(struct adv_softc *adv, 90 struct adv_ccb_info *cinfo); 91static __inline void adv_set_state(struct adv_softc *adv, adv_state state); 92static __inline void adv_clear_state(struct adv_softc *adv, union ccb* ccb); 93static void adv_clear_state_really(struct adv_softc *adv, union ccb* ccb); 94 95static __inline struct adv_ccb_info * 96adv_get_ccb_info(struct adv_softc *adv) 97{ 98 struct adv_ccb_info *cinfo; 99 int opri; 100 101 opri = splcam(); 102 if ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 103 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 104 } else { 105 cinfo = adv_alloc_ccb_info(adv); 106 } 107 splx(opri); 108 109 return (cinfo); 110} 111 112static __inline void 113adv_free_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 114{ 115 int opri; 116 117 opri = splcam(); 118 cinfo->state = ACCB_FREE; 119 SLIST_INSERT_HEAD(&adv->free_ccb_infos, cinfo, links); 120 splx(opri); 121} 122 123static __inline void 124adv_set_state(struct adv_softc *adv, adv_state state) 125{ 126 if (adv->state == 0) 127 xpt_freeze_simq(adv->sim, /*count*/1); 128 adv->state |= state; 129} 130 131static __inline void 132adv_clear_state(struct adv_softc *adv, union ccb* ccb) 133{ 134 if (adv->state != 0) 135 adv_clear_state_really(adv, ccb); 136} 137 138static void 139adv_clear_state_really(struct adv_softc *adv, union ccb* ccb) 140{ 141 if ((adv->state & ADV_BUSDMA_BLOCK_CLEARED) != 0) 142 adv->state &= ~(ADV_BUSDMA_BLOCK_CLEARED|ADV_BUSDMA_BLOCK); 143 if ((adv->state & ADV_RESOURCE_SHORTAGE) != 0) { 144 int openings; 145 146 openings = adv->max_openings - adv->cur_active - ADV_MIN_FREE_Q; 147 if (openings >= adv->openings_needed) { 148 adv->state &= ~ADV_RESOURCE_SHORTAGE; 149 adv->openings_needed = 0; 150 } 151 } 152 153 if ((adv->state & ADV_IN_TIMEOUT) != 0) { 154 struct adv_ccb_info *cinfo; 155 156 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 157 if ((cinfo->state & ACCB_RECOVERY_CCB) != 0) { 158 struct ccb_hdr *ccb_h; 159 160 /* 161 * We now traverse our list of pending CCBs 162 * and reinstate their timeouts. 163 */ 164 ccb_h = LIST_FIRST(&adv->pending_ccbs); 165 while (ccb_h != NULL) { 166 ccb_h->timeout_ch = 167 timeout(adv_timeout, (caddr_t)ccb_h, 168 (ccb_h->timeout * hz) / 1000); 169 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 170 } 171 adv->state &= ~ADV_IN_TIMEOUT; 172 printf("%s: No longer in timeout\n", adv_name(adv)); 173 } 174 } 175 if (adv->state == 0) 176 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 177} 178 179void 180adv_map(void *arg, bus_dma_segment_t *segs, int nseg, int error) 181{ 182 bus_addr_t* physaddr; 183 184 physaddr = (bus_addr_t*)arg; 185 *physaddr = segs->ds_addr; 186} 187 188char * 189adv_name(struct adv_softc *adv) 190{ 191 static char name[10]; 192 193 snprintf(name, sizeof(name), "adv%d", adv->unit); 194 return (name); 195} 196 197static void 198adv_action(struct cam_sim *sim, union ccb *ccb) 199{ 200 struct adv_softc *adv; 201 202 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n")); 203 204 adv = (struct adv_softc *)cam_sim_softc(sim); 205 206 switch (ccb->ccb_h.func_code) { 207 /* Common cases first */ 208 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 209 { 210 struct ccb_hdr *ccb_h; 211 struct ccb_scsiio *csio; 212 struct adv_ccb_info *cinfo; 213 214 ccb_h = &ccb->ccb_h; 215 csio = &ccb->csio; 216 cinfo = adv_get_ccb_info(adv); 217 if (cinfo == NULL) 218 panic("XXX Handle CCB info error!!!"); 219 220 ccb_h->ccb_cinfo_ptr = cinfo; 221 cinfo->ccb = ccb; 222 223 /* Only use S/G if there is a transfer */ 224 if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 225 if ((ccb_h->flags & CAM_SCATTER_VALID) == 0) { 226 /* 227 * We've been given a pointer 228 * to a single buffer 229 */ 230 if ((ccb_h->flags & CAM_DATA_PHYS) == 0) { 231 int s; 232 int error; 233 234 s = splsoftvm(); 235 error = 236 bus_dmamap_load(adv->buffer_dmat, 237 cinfo->dmamap, 238 csio->data_ptr, 239 csio->dxfer_len, 240 adv_execute_ccb, 241 csio, /*flags*/0); 242 if (error == EINPROGRESS) { 243 /* 244 * So as to maintain ordering, 245 * freeze the controller queue 246 * until our mapping is 247 * returned. 248 */ 249 adv_set_state(adv, 250 ADV_BUSDMA_BLOCK); 251 } 252 splx(s); 253 } else { 254 struct bus_dma_segment seg; 255 256 /* Pointer to physical buffer */ 257 seg.ds_addr = 258 (bus_addr_t)csio->data_ptr; 259 seg.ds_len = csio->dxfer_len; 260 adv_execute_ccb(csio, &seg, 1, 0); 261 } 262 } else { 263 struct bus_dma_segment *segs; 264 if ((ccb_h->flags & CAM_DATA_PHYS) != 0) 265 panic("adv_setup_data - Physical " 266 "segment pointers unsupported"); 267 268 if ((ccb_h->flags & CAM_SG_LIST_PHYS) == 0) 269 panic("adv_setup_data - Virtual " 270 "segment addresses unsupported"); 271 272 /* Just use the segments provided */ 273 segs = (struct bus_dma_segment *)csio->data_ptr; 274 adv_execute_ccb(ccb, segs, csio->sglist_cnt, 0); 275 } 276 } else { 277 adv_execute_ccb(ccb, NULL, 0, 0); 278 } 279 break; 280 } 281 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 282 case XPT_TARGET_IO: /* Execute target I/O request */ 283 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 284 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 285 case XPT_EN_LUN: /* Enable LUN as a target */ 286 case XPT_ABORT: /* Abort the specified CCB */ 287 /* XXX Implement */ 288 ccb->ccb_h.status = CAM_REQ_INVALID; 289 xpt_done(ccb); 290 break; 291#define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS) 292#define IS_USER_SETTINGS(c) (c->type == CTS_TYPE_USER_SETTINGS) 293 case XPT_SET_TRAN_SETTINGS: 294 { 295 struct ccb_trans_settings_scsi *scsi; 296 struct ccb_trans_settings_spi *spi; 297 struct ccb_trans_settings *cts; 298 target_bit_vector targ_mask; 299 struct adv_transinfo *tconf; 300 u_int update_type; 301 int s; 302 303 cts = &ccb->cts; 304 targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 305 update_type = 0; 306 307 /* 308 * The user must specify which type of settings he wishes 309 * to change. 310 */ 311 if (IS_CURRENT_SETTINGS(cts) && !IS_USER_SETTINGS(cts)) { 312 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 313 update_type |= ADV_TRANS_GOAL; 314 } else if (IS_USER_SETTINGS(cts) && !IS_CURRENT_SETTINGS(cts)) { 315 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 316 update_type |= ADV_TRANS_USER; 317 } else { 318 ccb->ccb_h.status = CAM_REQ_INVALID; 319 break; 320 } 321 322 s = splcam(); 323 scsi = &cts->proto_specific.scsi; 324 spi = &cts->xport_specific.spi; 325 if ((update_type & ADV_TRANS_GOAL) != 0) { 326 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { 327 if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) 328 adv->disc_enable |= targ_mask; 329 else 330 adv->disc_enable &= ~targ_mask; 331 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, 332 adv->disc_enable); 333 } 334 335 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 336 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 337 adv->cmd_qng_enabled |= targ_mask; 338 else 339 adv->cmd_qng_enabled &= ~targ_mask; 340 } 341 } 342 343 if ((update_type & ADV_TRANS_USER) != 0) { 344 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { 345 if ((spi->flags & CTS_SPI_VALID_DISC) != 0) 346 adv->user_disc_enable |= targ_mask; 347 else 348 adv->user_disc_enable &= ~targ_mask; 349 } 350 351 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { 352 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) 353 adv->user_cmd_qng_enabled |= targ_mask; 354 else 355 adv->user_cmd_qng_enabled &= ~targ_mask; 356 } 357 } 358 359 /* 360 * If the user specifies either the sync rate, or offset, 361 * but not both, the unspecified parameter defaults to its 362 * current value in transfer negotiations. 363 */ 364 if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) 365 || ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) { 366 /* 367 * If the user provided a sync rate but no offset, 368 * use the current offset. 369 */ 370 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) 371 spi->sync_offset = tconf->offset; 372 373 /* 374 * If the user provided an offset but no sync rate, 375 * use the current sync rate. 376 */ 377 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) 378 spi->sync_period = tconf->period; 379 380 adv_period_offset_to_sdtr(adv, &spi->sync_period, 381 &spi->sync_offset, 382 cts->ccb_h.target_id); 383 384 adv_set_syncrate(adv, /*struct cam_path */NULL, 385 cts->ccb_h.target_id, spi->sync_period, 386 spi->sync_offset, update_type); 387 } 388 389 splx(s); 390 ccb->ccb_h.status = CAM_REQ_CMP; 391 xpt_done(ccb); 392 break; 393 } 394 case XPT_GET_TRAN_SETTINGS: 395 /* Get default/user set transfer settings for the target */ 396 { 397 struct ccb_trans_settings_scsi *scsi; 398 struct ccb_trans_settings_spi *spi; 399 struct ccb_trans_settings *cts; 400 struct adv_transinfo *tconf; 401 target_bit_vector target_mask; 402 int s; 403 404 cts = &ccb->cts; 405 target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 406 407 scsi = &cts->proto_specific.scsi; 408 spi = &cts->xport_specific.spi; 409 410 cts->protocol = PROTO_SCSI; 411 cts->protocol_version = SCSI_REV_2; 412 cts->transport = XPORT_SPI; 413 cts->transport_version = 2; 414 415 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; 416 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; 417 418 s = splcam(); 419 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { 420 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 421 if ((adv->disc_enable & target_mask) != 0) 422 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 423 if ((adv->cmd_qng_enabled & target_mask) != 0) 424 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 425 } else { 426 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 427 if ((adv->user_disc_enable & target_mask) != 0) 428 spi->flags |= CTS_SPI_FLAGS_DISC_ENB; 429 if ((adv->user_cmd_qng_enabled & target_mask) != 0) 430 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; 431 } 432 spi->sync_period = tconf->period; 433 spi->sync_offset = tconf->offset; 434 splx(s); 435 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 436 spi->valid = CTS_SPI_VALID_SYNC_RATE 437 | CTS_SPI_VALID_SYNC_OFFSET 438 | CTS_SPI_VALID_BUS_WIDTH 439 | CTS_SPI_VALID_DISC; 440 scsi->valid = CTS_SCSI_VALID_TQ; 441 ccb->ccb_h.status = CAM_REQ_CMP; 442 xpt_done(ccb); 443 break; 444 } 445 case XPT_CALC_GEOMETRY: 446 { 447 int extended; 448 449 extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0; 450 cam_calc_geometry(&ccb->ccg, extended); 451 xpt_done(ccb); 452 break; 453 } 454 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 455 { 456 int s; 457 458 s = splcam(); 459 adv_stop_execution(adv); 460 adv_reset_bus(adv, /*initiate_reset*/TRUE); 461 adv_start_execution(adv); 462 splx(s); 463 464 ccb->ccb_h.status = CAM_REQ_CMP; 465 xpt_done(ccb); 466 break; 467 } 468 case XPT_TERM_IO: /* Terminate the I/O process */ 469 /* XXX Implement */ 470 ccb->ccb_h.status = CAM_REQ_INVALID; 471 xpt_done(ccb); 472 break; 473 case XPT_PATH_INQ: /* Path routing inquiry */ 474 { 475 struct ccb_pathinq *cpi = &ccb->cpi; 476 477 cpi->version_num = 1; /* XXX??? */ 478 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 479 cpi->target_sprt = 0; 480 cpi->hba_misc = 0; 481 cpi->hba_eng_cnt = 0; 482 cpi->max_target = 7; 483 cpi->max_lun = 7; 484 cpi->initiator_id = adv->scsi_id; 485 cpi->bus_id = cam_sim_bus(sim); 486 cpi->base_transfer_speed = 3300; 487 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 488 strncpy(cpi->hba_vid, "Advansys", HBA_IDLEN); 489 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 490 cpi->unit_number = cam_sim_unit(sim); 491 cpi->ccb_h.status = CAM_REQ_CMP; 492 cpi->transport = XPORT_SPI; 493 cpi->transport_version = 2; 494 cpi->protocol = PROTO_SCSI; 495 cpi->protocol_version = SCSI_REV_2; 496 xpt_done(ccb); 497 break; 498 } 499 default: 500 ccb->ccb_h.status = CAM_REQ_INVALID; 501 xpt_done(ccb); 502 break; 503 } 504} 505 506/* 507 * Currently, the output of bus_dmammap_load suits our needs just 508 * fine, but should it change, we'd need to do something here. 509 */ 510#define adv_fixup_dmasegs(adv, dm_segs) (struct adv_sg_entry *)(dm_segs) 511 512static void 513adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 514 int nsegments, int error) 515{ 516 struct ccb_scsiio *csio; 517 struct ccb_hdr *ccb_h; 518 struct cam_sim *sim; 519 struct adv_softc *adv; 520 struct adv_ccb_info *cinfo; 521 struct adv_scsi_q scsiq; 522 struct adv_sg_head sghead; 523 int s; 524 525 csio = (struct ccb_scsiio *)arg; 526 ccb_h = &csio->ccb_h; 527 sim = xpt_path_sim(ccb_h->path); 528 adv = (struct adv_softc *)cam_sim_softc(sim); 529 cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr; 530 531 /* 532 * Setup our done routine to release the simq on 533 * the next ccb that completes. 534 */ 535 if ((adv->state & ADV_BUSDMA_BLOCK) != 0) 536 adv->state |= ADV_BUSDMA_BLOCK_CLEARED; 537 538 if ((ccb_h->flags & CAM_CDB_POINTER) != 0) { 539 if ((ccb_h->flags & CAM_CDB_PHYS) == 0) { 540 /* XXX Need phystovirt!!!! */ 541 /* How about pmap_kenter??? */ 542 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 543 } else { 544 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 545 } 546 } else { 547 scsiq.cdbptr = csio->cdb_io.cdb_bytes; 548 } 549 /* 550 * Build up the request 551 */ 552 scsiq.q1.status = 0; 553 scsiq.q1.q_no = 0; 554 scsiq.q1.cntl = 0; 555 scsiq.q1.sg_queue_cnt = 0; 556 scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id); 557 scsiq.q1.target_lun = ccb_h->target_lun; 558 scsiq.q1.sense_len = csio->sense_len; 559 scsiq.q1.extra_bytes = 0; 560 scsiq.q2.ccb_index = cinfo - adv->ccb_infos; 561 scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id, 562 ccb_h->target_lun); 563 scsiq.q2.flag = 0; 564 scsiq.q2.cdb_len = csio->cdb_len; 565 if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0) 566 scsiq.q2.tag_code = csio->tag_action; 567 else 568 scsiq.q2.tag_code = 0; 569 scsiq.q2.vm_id = 0; 570 571 if (nsegments != 0) { 572 bus_dmasync_op_t op; 573 574 scsiq.q1.data_addr = dm_segs->ds_addr; 575 scsiq.q1.data_cnt = dm_segs->ds_len; 576 if (nsegments > 1) { 577 scsiq.q1.cntl |= QC_SG_HEAD; 578 sghead.entry_cnt 579 = sghead.entry_to_copy 580 = nsegments; 581 sghead.res = 0; 582 sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs); 583 scsiq.sg_head = &sghead; 584 } else { 585 scsiq.sg_head = NULL; 586 } 587 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN) 588 op = BUS_DMASYNC_PREREAD; 589 else 590 op = BUS_DMASYNC_PREWRITE; 591 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 592 } else { 593 scsiq.q1.data_addr = 0; 594 scsiq.q1.data_cnt = 0; 595 scsiq.sg_head = NULL; 596 } 597 598 s = splcam(); 599 600 /* 601 * Last time we need to check if this SCB needs to 602 * be aborted. 603 */ 604 if (ccb_h->status != CAM_REQ_INPROG) { 605 if (nsegments != 0) 606 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 607 adv_clear_state(adv, (union ccb *)csio); 608 adv_free_ccb_info(adv, cinfo); 609 xpt_done((union ccb *)csio); 610 splx(s); 611 return; 612 } 613 614 if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) { 615 /* Temporary resource shortage */ 616 adv_set_state(adv, ADV_RESOURCE_SHORTAGE); 617 if (nsegments != 0) 618 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 619 csio->ccb_h.status = CAM_REQUEUE_REQ; 620 adv_clear_state(adv, (union ccb *)csio); 621 adv_free_ccb_info(adv, cinfo); 622 xpt_done((union ccb *)csio); 623 splx(s); 624 return; 625 } 626 cinfo->state |= ACCB_ACTIVE; 627 ccb_h->status |= CAM_SIM_QUEUED; 628 LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le); 629 /* Schedule our timeout */ 630 ccb_h->timeout_ch = 631 timeout(adv_timeout, csio, (ccb_h->timeout * hz)/1000); 632 splx(s); 633} 634 635static struct adv_ccb_info * 636adv_alloc_ccb_info(struct adv_softc *adv) 637{ 638 int error; 639 struct adv_ccb_info *cinfo; 640 641 cinfo = &adv->ccb_infos[adv->ccb_infos_allocated]; 642 cinfo->state = ACCB_FREE; 643 error = bus_dmamap_create(adv->buffer_dmat, /*flags*/0, 644 &cinfo->dmamap); 645 if (error != 0) { 646 printf("%s: Unable to allocate CCB info " 647 "dmamap - error %d\n", adv_name(adv), error); 648 return (NULL); 649 } 650 adv->ccb_infos_allocated++; 651 return (cinfo); 652} 653 654static void 655adv_destroy_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 656{ 657 bus_dmamap_destroy(adv->buffer_dmat, cinfo->dmamap); 658} 659 660void 661adv_timeout(void *arg) 662{ 663 int s; 664 union ccb *ccb; 665 struct adv_softc *adv; 666 struct adv_ccb_info *cinfo; 667 668 ccb = (union ccb *)arg; 669 adv = (struct adv_softc *)xpt_path_sim(ccb->ccb_h.path)->softc; 670 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 671 672 xpt_print_path(ccb->ccb_h.path); 673 printf("Timed out\n"); 674 675 s = splcam(); 676 /* Have we been taken care of already?? */ 677 if (cinfo == NULL || cinfo->state == ACCB_FREE) { 678 splx(s); 679 return; 680 } 681 682 adv_stop_execution(adv); 683 684 if ((cinfo->state & ACCB_ABORT_QUEUED) == 0) { 685 struct ccb_hdr *ccb_h; 686 687 /* 688 * In order to simplify the recovery process, we ask the XPT 689 * layer to halt the queue of new transactions and we traverse 690 * the list of pending CCBs and remove their timeouts. This 691 * means that the driver attempts to clear only one error 692 * condition at a time. In general, timeouts that occur 693 * close together are related anyway, so there is no benefit 694 * in attempting to handle errors in parrallel. Timeouts will 695 * be reinstated when the recovery process ends. 696 */ 697 adv_set_state(adv, ADV_IN_TIMEOUT); 698 699 /* This CCB is the CCB representing our recovery actions */ 700 cinfo->state |= ACCB_RECOVERY_CCB|ACCB_ABORT_QUEUED; 701 702 ccb_h = LIST_FIRST(&adv->pending_ccbs); 703 while (ccb_h != NULL) { 704 untimeout(adv_timeout, ccb_h, ccb_h->timeout_ch); 705 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 706 } 707 708 /* XXX Should send a BDR */ 709 /* Attempt an abort as our first tact */ 710 xpt_print_path(ccb->ccb_h.path); 711 printf("Attempting abort\n"); 712 adv_abort_ccb(adv, ccb->ccb_h.target_id, 713 ccb->ccb_h.target_lun, ccb, 714 CAM_CMD_TIMEOUT, /*queued_only*/FALSE); 715 ccb->ccb_h.timeout_ch = 716 timeout(adv_timeout, ccb, 2 * hz); 717 } else { 718 /* Our attempt to perform an abort failed, go for a reset */ 719 xpt_print_path(ccb->ccb_h.path); 720 printf("Resetting bus\n"); 721 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 722 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 723 adv_reset_bus(adv, /*initiate_reset*/TRUE); 724 } 725 adv_start_execution(adv); 726 splx(s); 727} 728 729struct adv_softc * 730adv_alloc(device_t dev, bus_space_tag_t tag, bus_space_handle_t bsh) 731{ 732 struct adv_softc *adv = device_get_softc(dev); 733 734 /* 735 * Allocate a storage area for us 736 */ 737 LIST_INIT(&adv->pending_ccbs); 738 SLIST_INIT(&adv->free_ccb_infos); 739 adv->dev = dev; 740 adv->unit = device_get_unit(dev); 741 adv->tag = tag; 742 adv->bsh = bsh; 743 744 return(adv); 745} 746 747void 748adv_free(struct adv_softc *adv) 749{ 750 switch (adv->init_level) { 751 case 6: 752 { 753 struct adv_ccb_info *cinfo; 754 755 while ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 756 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 757 adv_destroy_ccb_info(adv, cinfo); 758 } 759 760 bus_dmamap_unload(adv->sense_dmat, adv->sense_dmamap); 761 } 762 case 5: 763 bus_dmamem_free(adv->sense_dmat, adv->sense_buffers, 764 adv->sense_dmamap); 765 case 4: 766 bus_dma_tag_destroy(adv->sense_dmat); 767 case 3: 768 bus_dma_tag_destroy(adv->buffer_dmat); 769 case 2: 770 bus_dma_tag_destroy(adv->parent_dmat); 771 case 1: 772 if (adv->ccb_infos != NULL) 773 free(adv->ccb_infos, M_DEVBUF); 774 case 0: 775 break; 776 } 777} 778 779int 780adv_init(struct adv_softc *adv) 781{ 782 struct adv_eeprom_config eeprom_config; 783 int checksum, i; 784 int max_sync; 785 u_int16_t config_lsw; 786 u_int16_t config_msw; 787 788 adv_lib_init(adv); 789 790 /* 791 * Stop script execution. 792 */ 793 adv_write_lram_16(adv, ADV_HALTCODE_W, 0x00FE); 794 adv_stop_execution(adv); 795 if (adv_stop_chip(adv) == 0 || adv_is_chip_halted(adv) == 0) { 796 printf("adv%d: Unable to halt adapter. Initialization" 797 "failed\n", adv->unit); 798 return (1); 799 } 800 ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR); 801 if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) { 802 printf("adv%d: Unable to set program counter. Initialization" 803 "failed\n", adv->unit); 804 return (1); 805 } 806 807 config_msw = ADV_INW(adv, ADV_CONFIG_MSW); 808 config_lsw = ADV_INW(adv, ADV_CONFIG_LSW); 809 810 if ((config_msw & ADV_CFG_MSW_CLR_MASK) != 0) { 811 config_msw &= ~ADV_CFG_MSW_CLR_MASK; 812 /* 813 * XXX The Linux code flags this as an error, 814 * but what should we report to the user??? 815 * It seems that clearing the config register 816 * makes this error recoverable. 817 */ 818 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 819 } 820 821 /* Suck in the configuration from the EEProm */ 822 checksum = adv_get_eeprom_config(adv, &eeprom_config); 823 824 if (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_AUTO_CONFIG) { 825 /* 826 * XXX The Linux code sets a warning level for this 827 * condition, yet nothing of meaning is printed to 828 * the user. What does this mean??? 829 */ 830 if (adv->chip_version == 3) { 831 if (eeprom_config.cfg_lsw != config_lsw) 832 eeprom_config.cfg_lsw = config_lsw; 833 if (eeprom_config.cfg_msw != config_msw) { 834 eeprom_config.cfg_msw = config_msw; 835 } 836 } 837 } 838 if (checksum == eeprom_config.chksum) { 839 840 /* Range/Sanity checking */ 841 if (eeprom_config.max_total_qng < ADV_MIN_TOTAL_QNG) { 842 eeprom_config.max_total_qng = ADV_MIN_TOTAL_QNG; 843 } 844 if (eeprom_config.max_total_qng > ADV_MAX_TOTAL_QNG) { 845 eeprom_config.max_total_qng = ADV_MAX_TOTAL_QNG; 846 } 847 if (eeprom_config.max_tag_qng > eeprom_config.max_total_qng) { 848 eeprom_config.max_tag_qng = eeprom_config.max_total_qng; 849 } 850 if (eeprom_config.max_tag_qng < ADV_MIN_TAG_Q_PER_DVC) { 851 eeprom_config.max_tag_qng = ADV_MIN_TAG_Q_PER_DVC; 852 } 853 adv->max_openings = eeprom_config.max_total_qng; 854 adv->user_disc_enable = eeprom_config.disc_enable; 855 adv->user_cmd_qng_enabled = eeprom_config.use_cmd_qng; 856 adv->isa_dma_speed = EEPROM_DMA_SPEED(eeprom_config); 857 adv->scsi_id = EEPROM_SCSIID(eeprom_config) & ADV_MAX_TID; 858 EEPROM_SET_SCSIID(eeprom_config, adv->scsi_id); 859 adv->control = eeprom_config.cntl; 860 for (i = 0; i <= ADV_MAX_TID; i++) { 861 u_int8_t sync_data; 862 863 if ((eeprom_config.init_sdtr & (0x1 << i)) == 0) 864 sync_data = 0; 865 else 866 sync_data = eeprom_config.sdtr_data[i]; 867 adv_sdtr_to_period_offset(adv, 868 sync_data, 869 &adv->tinfo[i].user.period, 870 &adv->tinfo[i].user.offset, 871 i); 872 } 873 config_lsw = eeprom_config.cfg_lsw; 874 eeprom_config.cfg_msw = config_msw; 875 } else { 876 u_int8_t sync_data; 877 878 printf("adv%d: Warning EEPROM Checksum mismatch. " 879 "Using default device parameters\n", adv->unit); 880 881 /* Set reasonable defaults since we can't read the EEPROM */ 882 adv->isa_dma_speed = /*ADV_DEF_ISA_DMA_SPEED*/1; 883 adv->max_openings = ADV_DEF_MAX_TOTAL_QNG; 884 adv->disc_enable = TARGET_BIT_VECTOR_SET; 885 adv->user_disc_enable = TARGET_BIT_VECTOR_SET; 886 adv->cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 887 adv->user_cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 888 adv->scsi_id = 7; 889 adv->control = 0xFFFF; 890 891 if (adv->chip_version == ADV_CHIP_VER_PCI_ULTRA_3050) 892 /* Default to no Ultra to support the 3030 */ 893 adv->control &= ~ADV_CNTL_SDTR_ENABLE_ULTRA; 894 sync_data = ADV_DEF_SDTR_OFFSET | (ADV_DEF_SDTR_INDEX << 4); 895 for (i = 0; i <= ADV_MAX_TID; i++) { 896 adv_sdtr_to_period_offset(adv, sync_data, 897 &adv->tinfo[i].user.period, 898 &adv->tinfo[i].user.offset, 899 i); 900 } 901 config_lsw |= ADV_CFG_LSW_SCSI_PARITY_ON; 902 } 903 config_msw &= ~ADV_CFG_MSW_CLR_MASK; 904 config_lsw |= ADV_CFG_LSW_HOST_INT_ON; 905 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA) 906 && (adv->control & ADV_CNTL_SDTR_ENABLE_ULTRA) == 0) 907 /* 25ns or 10MHz */ 908 max_sync = 25; 909 else 910 /* Unlimited */ 911 max_sync = 0; 912 for (i = 0; i <= ADV_MAX_TID; i++) { 913 if (adv->tinfo[i].user.period < max_sync) 914 adv->tinfo[i].user.period = max_sync; 915 } 916 917 if (adv_test_external_lram(adv) == 0) { 918 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)) { 919 eeprom_config.max_total_qng = 920 ADV_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; 921 eeprom_config.max_tag_qng = 922 ADV_MAX_PCI_ULTRA_INRAM_TAG_QNG; 923 } else { 924 eeprom_config.cfg_msw |= 0x0800; 925 config_msw |= 0x0800; 926 eeprom_config.max_total_qng = 927 ADV_MAX_PCI_INRAM_TOTAL_QNG; 928 eeprom_config.max_tag_qng = ADV_MAX_INRAM_TAG_QNG; 929 } 930 adv->max_openings = eeprom_config.max_total_qng; 931 } 932 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 933 ADV_OUTW(adv, ADV_CONFIG_LSW, config_lsw); 934#if 0 935 /* 936 * Don't write the eeprom data back for now. 937 * I'd rather not mess up the user's card. We also don't 938 * fully sanitize the eeprom settings above for the write-back 939 * to be 100% correct. 940 */ 941 if (adv_set_eeprom_config(adv, &eeprom_config) != 0) 942 printf("%s: WARNING! Failure writing to EEPROM.\n", 943 adv_name(adv)); 944#endif 945 946 adv_set_chip_scsiid(adv, adv->scsi_id); 947 if (adv_init_lram_and_mcode(adv)) 948 return (1); 949 950 adv->disc_enable = adv->user_disc_enable; 951 952 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable); 953 for (i = 0; i <= ADV_MAX_TID; i++) { 954 /* 955 * Start off in async mode. 956 */ 957 adv_set_syncrate(adv, /*struct cam_path */NULL, 958 i, /*period*/0, /*offset*/0, 959 ADV_TRANS_CUR); 960 /* 961 * Enable the use of tagged commands on all targets. 962 * This allows the kernel driver to make up it's own mind 963 * as it sees fit to tag queue instead of having the 964 * firmware try and second guess the tag_code settins. 965 */ 966 adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + i, 967 adv->max_openings); 968 } 969 adv_write_lram_8(adv, ADVV_USE_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 970 adv_write_lram_8(adv, ADVV_CAN_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 971 printf("adv%d: AdvanSys %s Host Adapter, SCSI ID %d, queue depth %d\n", 972 adv->unit, (adv->type & ADV_ULTRA) && (max_sync == 0) 973 ? "Ultra SCSI" : "SCSI", 974 adv->scsi_id, adv->max_openings); 975 return (0); 976} 977 978void 979adv_intr(void *arg) 980{ 981 struct adv_softc *adv; 982 u_int16_t chipstat; 983 u_int16_t saved_ram_addr; 984 u_int8_t ctrl_reg; 985 u_int8_t saved_ctrl_reg; 986 u_int8_t host_flag; 987 988 adv = (struct adv_softc *)arg; 989 990 chipstat = ADV_INW(adv, ADV_CHIP_STATUS); 991 992 /* Is it for us? */ 993 if ((chipstat & (ADV_CSW_INT_PENDING|ADV_CSW_SCSI_RESET_LATCH)) == 0) 994 return; 995 996 ctrl_reg = ADV_INB(adv, ADV_CHIP_CTRL); 997 saved_ctrl_reg = ctrl_reg & (~(ADV_CC_SCSI_RESET | ADV_CC_CHIP_RESET | 998 ADV_CC_SINGLE_STEP | ADV_CC_DIAG | 999 ADV_CC_TEST)); 1000 1001 if ((chipstat & (ADV_CSW_SCSI_RESET_LATCH|ADV_CSW_SCSI_RESET_ACTIVE))) { 1002 printf("Detected Bus Reset\n"); 1003 adv_reset_bus(adv, /*initiate_reset*/FALSE); 1004 return; 1005 } 1006 1007 if ((chipstat & ADV_CSW_INT_PENDING) != 0) { 1008 1009 saved_ram_addr = ADV_INW(adv, ADV_LRAM_ADDR); 1010 host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B); 1011 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, 1012 host_flag | ADV_HOST_FLAG_IN_ISR); 1013 1014 adv_ack_interrupt(adv); 1015 1016 if ((chipstat & ADV_CSW_HALTED) != 0 1017 && (ctrl_reg & ADV_CC_SINGLE_STEP) != 0) { 1018 adv_isr_chip_halted(adv); 1019 saved_ctrl_reg &= ~ADV_CC_HALT; 1020 } else { 1021 adv_run_doneq(adv); 1022 } 1023 ADV_OUTW(adv, ADV_LRAM_ADDR, saved_ram_addr); 1024#ifdef DIAGNOSTIC 1025 if (ADV_INW(adv, ADV_LRAM_ADDR) != saved_ram_addr) 1026 panic("adv_intr: Unable to set LRAM addr"); 1027#endif 1028 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag); 1029 } 1030 1031 ADV_OUTB(adv, ADV_CHIP_CTRL, saved_ctrl_reg); 1032} 1033 1034static void 1035adv_run_doneq(struct adv_softc *adv) 1036{ 1037 struct adv_q_done_info scsiq; 1038 u_int doneq_head; 1039 u_int done_qno; 1040 1041 doneq_head = adv_read_lram_16(adv, ADVV_DONE_Q_TAIL_W) & 0xFF; 1042 done_qno = adv_read_lram_8(adv, ADV_QNO_TO_QADDR(doneq_head) 1043 + ADV_SCSIQ_B_FWD); 1044 while (done_qno != ADV_QLINK_END) { 1045 union ccb* ccb; 1046 struct adv_ccb_info *cinfo; 1047 u_int done_qaddr; 1048 u_int sg_queue_cnt; 1049 int aborted; 1050 1051 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 1052 1053 /* Pull status from this request */ 1054 sg_queue_cnt = adv_copy_lram_doneq(adv, done_qaddr, &scsiq, 1055 adv->max_dma_count); 1056 1057 /* Mark it as free */ 1058 adv_write_lram_8(adv, done_qaddr + ADV_SCSIQ_B_STATUS, 1059 scsiq.q_status & ~(QS_READY|QS_ABORTED)); 1060 1061 /* Process request based on retrieved info */ 1062 if ((scsiq.cntl & QC_SG_HEAD) != 0) { 1063 u_int i; 1064 1065 /* 1066 * S/G based request. Free all of the queue 1067 * structures that contained S/G information. 1068 */ 1069 for (i = 0; i < sg_queue_cnt; i++) { 1070 done_qno = adv_read_lram_8(adv, done_qaddr 1071 + ADV_SCSIQ_B_FWD); 1072 1073#ifdef DIAGNOSTIC 1074 if (done_qno == ADV_QLINK_END) { 1075 panic("adv_qdone: Corrupted SG " 1076 "list encountered"); 1077 } 1078#endif 1079 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 1080 1081 /* Mark SG queue as free */ 1082 adv_write_lram_8(adv, done_qaddr 1083 + ADV_SCSIQ_B_STATUS, QS_FREE); 1084 } 1085 } else 1086 sg_queue_cnt = 0; 1087#ifdef DIAGNOSTIC 1088 if (adv->cur_active < (sg_queue_cnt + 1)) 1089 panic("adv_qdone: Attempting to free more " 1090 "queues than are active"); 1091#endif 1092 adv->cur_active -= sg_queue_cnt + 1; 1093 1094 aborted = (scsiq.q_status & QS_ABORTED) != 0; 1095 1096 if ((scsiq.q_status != QS_DONE) 1097 && (scsiq.q_status & QS_ABORTED) == 0) 1098 panic("adv_qdone: completed scsiq with unknown status"); 1099 1100 scsiq.remain_bytes += scsiq.extra_bytes; 1101 1102 if ((scsiq.d3.done_stat == QD_WITH_ERROR) && 1103 (scsiq.d3.host_stat == QHSTA_M_DATA_OVER_RUN)) { 1104 if ((scsiq.cntl & (QC_DATA_IN|QC_DATA_OUT)) == 0) { 1105 scsiq.d3.done_stat = QD_NO_ERROR; 1106 scsiq.d3.host_stat = QHSTA_NO_ERROR; 1107 } 1108 } 1109 1110 cinfo = &adv->ccb_infos[scsiq.d2.ccb_index]; 1111 ccb = cinfo->ccb; 1112 ccb->csio.resid = scsiq.remain_bytes; 1113 adv_done(adv, ccb, 1114 scsiq.d3.done_stat, scsiq.d3.host_stat, 1115 scsiq.d3.scsi_stat, scsiq.q_no); 1116 1117 doneq_head = done_qno; 1118 done_qno = adv_read_lram_8(adv, done_qaddr + ADV_SCSIQ_B_FWD); 1119 } 1120 adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, doneq_head); 1121} 1122 1123 1124void 1125adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat, 1126 u_int host_stat, u_int scsi_status, u_int q_no) 1127{ 1128 struct adv_ccb_info *cinfo; 1129 1130 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 1131 LIST_REMOVE(&ccb->ccb_h, sim_links.le); 1132 untimeout(adv_timeout, ccb, ccb->ccb_h.timeout_ch); 1133 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1134 bus_dmasync_op_t op; 1135 1136 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1137 op = BUS_DMASYNC_POSTREAD; 1138 else 1139 op = BUS_DMASYNC_POSTWRITE; 1140 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 1141 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 1142 } 1143 1144 switch (done_stat) { 1145 case QD_NO_ERROR: 1146 if (host_stat == QHSTA_NO_ERROR) { 1147 ccb->ccb_h.status = CAM_REQ_CMP; 1148 break; 1149 } 1150 xpt_print_path(ccb->ccb_h.path); 1151 printf("adv_done - queue done without error, " 1152 "but host status non-zero(%x)\n", host_stat); 1153 /*FALLTHROUGH*/ 1154 case QD_WITH_ERROR: 1155 switch (host_stat) { 1156 case QHSTA_M_TARGET_STATUS_BUSY: 1157 case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY: 1158 /* 1159 * Assume that if we were a tagged transaction 1160 * the target reported queue full. Otherwise, 1161 * report busy. The firmware really should just 1162 * pass the original status back up to us even 1163 * if it thinks the target was in error for 1164 * returning this status as no other transactions 1165 * from this initiator are in effect, but this 1166 * ignores multi-initiator setups and there is 1167 * evidence that the firmware gets its per-device 1168 * transaction counts screwed up occassionally. 1169 */ 1170 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1171 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 1172 && host_stat != QHSTA_M_TARGET_STATUS_BUSY) 1173 scsi_status = SCSI_STATUS_QUEUE_FULL; 1174 else 1175 scsi_status = SCSI_STATUS_BUSY; 1176 adv_abort_ccb(adv, ccb->ccb_h.target_id, 1177 ccb->ccb_h.target_lun, 1178 /*ccb*/NULL, CAM_REQUEUE_REQ, 1179 /*queued_only*/TRUE); 1180 /*FALLTHROUGH*/ 1181 case QHSTA_M_NO_AUTO_REQ_SENSE: 1182 case QHSTA_NO_ERROR: 1183 ccb->csio.scsi_status = scsi_status; 1184 switch (scsi_status) { 1185 case SCSI_STATUS_CHECK_COND: 1186 case SCSI_STATUS_CMD_TERMINATED: 1187 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 1188 /* Structure copy */ 1189 ccb->csio.sense_data = 1190 adv->sense_buffers[q_no - 1]; 1191 /* FALLTHROUGH */ 1192 case SCSI_STATUS_BUSY: 1193 case SCSI_STATUS_RESERV_CONFLICT: 1194 case SCSI_STATUS_QUEUE_FULL: 1195 case SCSI_STATUS_COND_MET: 1196 case SCSI_STATUS_INTERMED: 1197 case SCSI_STATUS_INTERMED_COND_MET: 1198 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1199 break; 1200 case SCSI_STATUS_OK: 1201 ccb->ccb_h.status |= CAM_REQ_CMP; 1202 break; 1203 } 1204 break; 1205 case QHSTA_M_SEL_TIMEOUT: 1206 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1207 break; 1208 case QHSTA_M_DATA_OVER_RUN: 1209 ccb->ccb_h.status = CAM_DATA_RUN_ERR; 1210 break; 1211 case QHSTA_M_UNEXPECTED_BUS_FREE: 1212 ccb->ccb_h.status = CAM_UNEXP_BUSFREE; 1213 break; 1214 case QHSTA_M_BAD_BUS_PHASE_SEQ: 1215 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1216 break; 1217 case QHSTA_M_BAD_CMPL_STATUS_IN: 1218 /* No command complete after a status message */ 1219 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1220 break; 1221 case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT: 1222 case QHSTA_M_WTM_TIMEOUT: 1223 case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET: 1224 /* The SCSI bus hung in a phase */ 1225 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1226 adv_reset_bus(adv, /*initiate_reset*/TRUE); 1227 break; 1228 case QHSTA_M_AUTO_REQ_SENSE_FAIL: 1229 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL; 1230 break; 1231 case QHSTA_D_QDONE_SG_LIST_CORRUPTED: 1232 case QHSTA_D_ASC_DVC_ERROR_CODE_SET: 1233 case QHSTA_D_HOST_ABORT_FAILED: 1234 case QHSTA_D_EXE_SCSI_Q_FAILED: 1235 case QHSTA_D_ASPI_NO_BUF_POOL: 1236 case QHSTA_M_BAD_TAG_CODE: 1237 case QHSTA_D_LRAM_CMP_ERROR: 1238 case QHSTA_M_MICRO_CODE_ERROR_HALT: 1239 default: 1240 panic("%s: Unhandled Host status error %x", 1241 adv_name(adv), host_stat); 1242 /* NOTREACHED */ 1243 } 1244 break; 1245 1246 case QD_ABORTED_BY_HOST: 1247 /* Don't clobber any, more explicit, error codes we've set */ 1248 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) 1249 ccb->ccb_h.status = CAM_REQ_ABORTED; 1250 break; 1251 1252 default: 1253 xpt_print_path(ccb->ccb_h.path); 1254 printf("adv_done - queue done with unknown status %x:%x\n", 1255 done_stat, host_stat); 1256 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 1257 break; 1258 } 1259 adv_clear_state(adv, ccb); 1260 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP 1261 && (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) { 1262 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 1263 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1264 } 1265 adv_free_ccb_info(adv, cinfo); 1266 /* 1267 * Null this out so that we catch driver bugs that cause a 1268 * ccb to be completed twice. 1269 */ 1270 ccb->ccb_h.ccb_cinfo_ptr = NULL; 1271 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1272 xpt_done(ccb); 1273} 1274 1275/* 1276 * Function to poll for command completion when 1277 * interrupts are disabled (crash dumps) 1278 */ 1279static void 1280adv_poll(struct cam_sim *sim) 1281{ 1282 adv_intr(cam_sim_softc(sim)); 1283} 1284 1285/* 1286 * Attach all the sub-devices we can find 1287 */ 1288int 1289adv_attach(adv) 1290 struct adv_softc *adv; 1291{ 1292 struct ccb_setasync csa; 1293 struct cam_devq *devq; 1294 int max_sg; 1295 1296 /* 1297 * Allocate an array of ccb mapping structures. We put the 1298 * index of the ccb_info structure into the queue representing 1299 * a transaction and use it for mapping the queue to the 1300 * upper level SCSI transaction it represents. 1301 */ 1302 adv->ccb_infos = malloc(sizeof(*adv->ccb_infos) * adv->max_openings, 1303 M_DEVBUF, M_NOWAIT); 1304 1305 if (adv->ccb_infos == NULL) 1306 return (ENOMEM); 1307 1308 adv->init_level++; 1309 1310 /* 1311 * Create our DMA tags. These tags define the kinds of device 1312 * accessible memory allocations and memory mappings we will 1313 * need to perform during normal operation. 1314 * 1315 * Unless we need to further restrict the allocation, we rely 1316 * on the restrictions of the parent dmat, hence the common 1317 * use of MAXADDR and MAXSIZE. 1318 * 1319 * The ASC boards use chains of "queues" (the transactional 1320 * resources on the board) to represent long S/G lists. 1321 * The first queue represents the command and holds a 1322 * single address and data pair. The queues that follow 1323 * can each hold ADV_SG_LIST_PER_Q entries. Given the 1324 * total number of queues, we can express the largest 1325 * transaction we can map. We reserve a few queues for 1326 * error recovery. Take those into account as well. 1327 * 1328 * There is a way to take an interrupt to download the 1329 * next batch of S/G entries if there are more than 255 1330 * of them (the counter in the queue structure is a u_int8_t). 1331 * We don't use this feature, so limit the S/G list size 1332 * accordingly. 1333 */ 1334 max_sg = (adv->max_openings - ADV_MIN_FREE_Q - 1) * ADV_SG_LIST_PER_Q; 1335 if (max_sg > 255) 1336 max_sg = 255; 1337 1338 /* DMA tag for mapping buffers into device visible space. */ 1339 if (bus_dma_tag_create( 1340 /* parent */ adv->parent_dmat, 1341 /* alignment */ 1, 1342 /* boundary */ 0, 1343 /* lowaddr */ BUS_SPACE_MAXADDR, 1344 /* highaddr */ BUS_SPACE_MAXADDR, 1345 /* filter */ NULL, 1346 /* filterarg */ NULL, 1347 /* maxsize */ MAXPHYS, 1348 /* nsegments */ max_sg, 1349 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, 1350 /* flags */ BUS_DMA_ALLOCNOW, 1351 /* lockfunc */ busdma_lock_mutex, 1352 /* lockarg */ &Giant, 1353 &adv->buffer_dmat) != 0) { 1354 return (ENXIO); 1355 } 1356 adv->init_level++; 1357 1358 /* DMA tag for our sense buffers */ 1359 if (bus_dma_tag_create( 1360 /* parent */ adv->parent_dmat, 1361 /* alignment */ 1, 1362 /* boundary */ 0, 1363 /* lowaddr */ BUS_SPACE_MAXADDR, 1364 /* highaddr */ BUS_SPACE_MAXADDR, 1365 /* filter */ NULL, 1366 /* filterarg */ NULL, 1367 /* maxsize */ sizeof(struct scsi_sense_data) * 1368 adv->max_openings, 1369 /* nsegments */ 1, 1370 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT, 1371 /* flags */ 0, 1372 /* lockfunc */ busdma_lock_mutex, 1373 /* lockarg */ &Giant, 1374 &adv->sense_dmat) != 0) { 1375 return (ENXIO); 1376 } 1377 1378 adv->init_level++; 1379 1380 /* Allocation for our sense buffers */ 1381 if (bus_dmamem_alloc(adv->sense_dmat, (void **)&adv->sense_buffers, 1382 BUS_DMA_NOWAIT, &adv->sense_dmamap) != 0) { 1383 return (ENOMEM); 1384 } 1385 1386 adv->init_level++; 1387 1388 /* And permanently map them */ 1389 bus_dmamap_load(adv->sense_dmat, adv->sense_dmamap, 1390 adv->sense_buffers, 1391 sizeof(struct scsi_sense_data)*adv->max_openings, 1392 adv_map, &adv->sense_physbase, /*flags*/0); 1393 1394 adv->init_level++; 1395 1396 /* 1397 * Fire up the chip 1398 */ 1399 if (adv_start_chip(adv) != 1) { 1400 printf("adv%d: Unable to start on board processor. Aborting.\n", 1401 adv->unit); 1402 return (ENXIO); 1403 } 1404 1405 /* 1406 * Create the device queue for our SIM. 1407 */ 1408 devq = cam_simq_alloc(adv->max_openings); 1409 if (devq == NULL) 1410 return (ENOMEM); 1411 1412 /* 1413 * Construct our SIM entry. 1414 */ 1415 adv->sim = cam_sim_alloc(adv_action, adv_poll, "adv", adv, adv->unit, 1416 1, adv->max_openings, devq); 1417 if (adv->sim == NULL) 1418 return (ENOMEM); 1419 1420 /* 1421 * Register the bus. 1422 * 1423 * XXX Twin Channel EISA Cards??? 1424 */ 1425 if (xpt_bus_register(adv->sim, 0) != CAM_SUCCESS) { 1426 cam_sim_free(adv->sim, /*free devq*/TRUE); 1427 return (ENXIO); 1428 } 1429 1430 if (xpt_create_path(&adv->path, /*periph*/NULL, cam_sim_path(adv->sim), 1431 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) 1432 != CAM_REQ_CMP) { 1433 xpt_bus_deregister(cam_sim_path(adv->sim)); 1434 cam_sim_free(adv->sim, /*free devq*/TRUE); 1435 return (ENXIO); 1436 } 1437 1438 xpt_setup_ccb(&csa.ccb_h, adv->path, /*priority*/5); 1439 csa.ccb_h.func_code = XPT_SASYNC_CB; 1440 csa.event_enable = AC_FOUND_DEVICE|AC_LOST_DEVICE; 1441 csa.callback = advasync; 1442 csa.callback_arg = adv; 1443 xpt_action((union ccb *)&csa); 1444 return (0); 1445} 1446